diff options
Diffstat (limited to 'doc/man')
42 files changed, 8321 insertions, 0 deletions
diff --git a/doc/man/8/CMakeLists.txt b/doc/man/8/CMakeLists.txt new file mode 100644 index 00000000..819afc05 --- /dev/null +++ b/doc/man/8/CMakeLists.txt @@ -0,0 +1,84 @@ +set(client_srcs + ceph-syn.rst + ceph-conf.rst + ceph.rst + ceph-authtool.rst + ceph-kvstore-tool.rst + rados.rst + ceph-post-file.rst + ceph-dencoder.rst) + +set(server_srcs + ceph-deploy.rst + crushtool.rst + ceph-run.rst + mount.ceph.rst + ceph-create-keys.rst) +if(WITH_TESTS) +list(APPEND server_srcs + ceph-debugpack.rst) +endif(WITH_TESTS) + +set(osd_srcs + ceph-clsinfo.rst + ceph-volume.rst + ceph-volume-systemd.rst + ceph-osd.rst + osdmaptool.rst + ceph-bluestore-tool.rst) + +set(mon_srcs + ceph-mon.rst + monmaptool.rst) + +list(APPEND man_srcs + ${client_srcs} + ${server_srcs} + ${osd_srcs} + ${mon_srcs} + ceph-mds.rst + librados-config.rst) + +if(HAVE_LIBFUSE) + list(APPEND man_srcs + ceph-fuse.rst + rbd-fuse.rst) +endif() + +if(WITH_RADOSGW) + list(APPEND man_srcs + radosgw.rst + radosgw-admin.rst + rgw-orphan-list.rst + ceph-diff-sorted.rst) +endif() + +if(WITH_RBD) + list(APPEND man_srcs + ceph-rbdnamer.rst + rbd-mirror.rst + rbd-replay-many.rst + rbd-replay-prep.rst + rbd-replay.rst + rbdmap.rst + rbd.rst) + if(LINUX) + list(APPEND man_srcs rbd-nbd.rst) + endif() + if(FREEBSD) + list(APPEND man_srcs rbd-ggate.rst) + endif() +endif() + +foreach(man ${man_srcs}) + list(APPEND sphinx_input ${CMAKE_CURRENT_SOURCE_DIR}/${man}) + # mount.ceph.rst => mount if we use + # get_filename_component(cmd ${man} NAME_WE) + string(REGEX REPLACE ".rst$" "" cmd ${man}) + list(APPEND sphinx_output ${sphinx_output_dir}/${cmd}.8) + install(FILES ${sphinx_output_dir}/${cmd}.8 + DESTINATION ${CEPH_MAN_DIR}/man8) +endforeach() + +set(sphinx_input ${sphinx_input} PARENT_SCOPE) +set(sphinx_output ${sphinx_output} PARENT_SCOPE) diff --git a/doc/man/8/ceph-authtool.rst b/doc/man/8/ceph-authtool.rst new file mode 100644 index 00000000..05532f55 --- /dev/null +++ b/doc/man/8/ceph-authtool.rst @@ -0,0 +1,206 @@ +:orphan: + +================================================= + ceph-authtool -- ceph keyring manipulation tool +================================================= + +.. program:: ceph-authtool + +Synopsis +======== + +| **ceph-authtool** *keyringfile* + [ -l | --list ] + [ -p | --print-key ] + [ -C | --create-keyring ] + [ -g | --gen-key ] + [ --gen-print-key ] + [ --import-keyring *otherkeyringfile* ] + [ -n | --name *entityname* ] + [ -a | --add-key *base64_key* ] + [ --cap *subsystem* *capability* ] + [ --caps *capfile* ] + [ --mode *mode* ] + + +Description +=========== + +**ceph-authtool** is a utility to create, view, and modify a Ceph keyring +file. A keyring file stores one or more Ceph authentication keys and +possibly an associated capability specification. Each key is +associated with an entity name, of the form +``{client,mon,mds,osd}.name``. + +**WARNING** Ceph provides authentication and protection against +man-in-the-middle attacks once secret keys are in place. However, +data over the wire is not encrypted, which may include the messages +used to configure said keys. The system is primarily intended to be +used in trusted environments. + +Options +======= + +.. option:: -l, --list + + will list all keys and capabilities present in the keyring + +.. option:: -p, --print-key + + will print an encoded key for the specified entityname. This is + suitable for the ``mount -o secret=`` argument + +.. option:: -C, --create-keyring + + will create a new keyring, overwriting any existing keyringfile + +.. option:: -g, --gen-key + + will generate a new secret key for the specified entityname + +.. option:: --gen-print-key + + will generate a new secret key for the specified entityname, + without altering the keyringfile, printing the secret to stdout + +.. option:: --import-keyring *secondkeyringfile* + + will import the content of a given keyring to the keyringfile + +.. option:: -n, --name *name* + + specify entityname to operate on + +.. option:: -a, --add-key *base64_key* + + will add an encoded key to the keyring + +.. option:: --cap *subsystem* *capability* + + will set the capability for given subsystem + +.. option:: --caps *capsfile* + + will set all of capabilities associated with a given key, for all subsystems + + .. option:: --mode *mode* + + will set the desired file mode to the keyring e.g: 0644, defaults to 0600 + + +Capabilities +============ + +The subsystem is the name of a Ceph subsystem: ``mon``, ``mds``, or +``osd``. + +The capability is a string describing what the given user is allowed +to do. This takes the form of a comma separated list of allow +clauses with a permission specifier containing one or more of rwx for +read, write, and execute permission. The ``allow *`` grants full +superuser permissions for the given subsystem. + +For example:: + + # can read, write, and execute objects + osd = "allow rwx" + + # can access mds server + mds = "allow" + + # can modify cluster state (i.e., is a server daemon) + mon = "allow rwx" + +A librados user restricted to a single pool might look like:: + + mon = "allow r" + + osd = "allow rw pool foo" + +A client using rbd with read access to one pool and read/write access to another:: + + mon = "allow r" + + osd = "allow class-read object_prefix rbd_children, allow pool templates r class-read, allow pool vms rwx" + +A client mounting the file system with minimal permissions would need caps like:: + + mds = "allow" + + osd = "allow rw pool data" + + mon = "allow r" + + +OSD Capabilities +================ + +In general, an osd capability follows the grammar:: + + osdcap := grant[,grant...] + grant := allow (match capspec | capspec match) + match := [ pool[=]<poolname> | object_prefix <prefix> + | namespace[=]<rados-namespace> + | tag <application-name> <key>=<value> ] + capspec := * | [r][w][x] [class-read] [class-write] + +The capspec determines what kind of operations the entity can perform:: + + r = read access to objects + w = write access to objects + x = can call any class method (same as class-read class-write) + class-read = can call class methods that are reads + class-write = can call class methods that are writes + * or "all" = equivalent to rwx, plus the ability to run osd admin commands, + i.e. ceph osd tell ... + +The match criteria restrict a grant based on the pool being accessed. +Grants are additive if the client fulfills the match condition. For +example, if a client has the osd capabilities: "allow r object_prefix +prefix, allow w pool foo, allow x pool bar", then it has rw access to +pool foo, rx access to pool bar, and r access to objects whose +names begin with 'prefix' in any pool. + +Caps file format +================ + +The caps file format consists of zero or more key/value pairs, one per +line. The key and value are separated by an ``=``, and the value must +be quoted (with ``'`` or ``"``) if it contains any whitespace. The key +is the name of the Ceph subsystem (``osd``, ``mds``, ``mon``), and the +value is the capability string (see above). + + +Example +======= + +To create a new keyring containing a key for client.foo with a 0644 file mode:: + + ceph-authtool -C -n client.foo --gen-key keyring --mode 0644 + +To associate some capabilities with the key (namely, the ability to +mount a Ceph filesystem):: + + ceph-authtool -n client.foo --cap mds 'allow' --cap osd 'allow rw pool=data' --cap mon 'allow r' keyring + +To display the contents of the keyring:: + + ceph-authtool -l keyring + +When mounting a Ceph file system, you can grab the appropriately encoded secret key with:: + + mount -t ceph serverhost:/ mountpoint -o name=foo,secret=`ceph-authtool -p -n client.foo keyring` + + +Availability +============ + +**ceph-authtool** is part of Ceph, a massively scalable, open-source, distributed storage system. Please +refer to the Ceph documentation at http://ceph.com/docs for more +information. + + +See also +======== + +:doc:`ceph <ceph>`\(8) diff --git a/doc/man/8/ceph-bluestore-tool.rst b/doc/man/8/ceph-bluestore-tool.rst new file mode 100644 index 00000000..667c330d --- /dev/null +++ b/doc/man/8/ceph-bluestore-tool.rst @@ -0,0 +1,182 @@ +:orphan: + +====================================================== + ceph-bluestore-tool -- bluestore administrative tool +====================================================== + +.. program:: ceph-bluestore-tool + +Synopsis +======== + +| **ceph-bluestore-tool** *command* + [ --dev *device* ... ] + [ --path *osd path* ] + [ --out-dir *dir* ] + [ --log-file | -l *filename* ] + [ --deep ] +| **ceph-bluestore-tool** fsck|repair --path *osd path* [ --deep ] +| **ceph-bluestore-tool** show-label --dev *device* ... +| **ceph-bluestore-tool** prime-osd-dir --dev *device* --path *osd path* +| **ceph-bluestore-tool** bluefs-export --path *osd path* --out-dir *dir* +| **ceph-bluestore-tool** bluefs-bdev-new-wal --path *osd path* --dev-target *new-device* +| **ceph-bluestore-tool** bluefs-bdev-new-db --path *osd path* --dev-target *new-device* +| **ceph-bluestore-tool** bluefs-bdev-migrate --path *osd path* --dev-target *new-device* --devs-source *device1* [--devs-source *device2*] +| **ceph-bluestore-tool** free-dump|free-score --path *osd path* [ --allocator block/bluefs-wal/bluefs-db/bluefs-slow ] + + +Description +=========== + +**ceph-bluestore-tool** is a utility to perform low-level administrative +operations on a BlueStore instance. + +Commands +======== + +:command:`help` + + show help + +:command:`fsck` [ --deep ] + + run consistency check on BlueStore metadata. If *--deep* is specified, also read all object data and verify checksums. + +:command:`repair` + + Run a consistency check *and* repair any errors we can. + +:command:`bluefs-export` + + Export the contents of BlueFS (i.e., rocksdb files) to an output directory. + +:command:`bluefs-bdev-sizes` --path *osd path* + + Print the device sizes, as understood by BlueFS, to stdout. + +:command:`bluefs-bdev-expand` --path *osd path* + + Instruct BlueFS to check the size of its block devices and, if they have expanded, make use of the additional space. + +:command:`bluefs-bdev-new-wal` --path *osd path* --dev-target *new-device* + + Adds WAL device to BlueFS, fails if WAL device already exists. + +:command:`bluefs-bdev-new-db` --path *osd path* --dev-target *new-device* + + Adds DB device to BlueFS, fails if DB device already exists. + +:command:`bluefs-bdev-migrate` --dev-target *new-device* --devs-source *device1* [--devs-source *device2*] + + Moves BlueFS data from source device(s) to the target one, source devices + (except the main one) are removed on success. Target device can be both + already attached or new device. In the latter case it's added to OSD + replacing one of the source devices. Following replacement rules apply + (in the order of precedence, stop on the first match): + + - if source list has DB volume - target device replaces it. + - if source list has WAL volume - target device replace it. + - if source list has slow volume only - operation isn't permitted, requires explicit allocation via new-db/new-wal command. + +:command:`show-label` --dev *device* [...] + + Show device label(s). + +:command:`free-dump` --path *osd path* [ --allocator block/bluefs-wal/bluefs-db/bluefs-slow ] + + Dump all free regions in allocator. + +:command:`free-score` --path *osd path* [ --allocator block/bluefs-wal/bluefs-db/bluefs-slow ] + + Give a [0-1] number that represents quality of fragmentation in allocator. + 0 represents case when all free space is in one chunk. 1 represents worst possible fragmentation. + +Options +======= + +.. option:: --dev *device* + + Add *device* to the list of devices to consider + +.. option:: --devs-source *device* + + Add *device* to the list of devices to consider as sources for migrate operation + +.. option:: --dev-target *device* + + Specify target *device* migrate operation or device to add for adding new DB/WAL. + +.. option:: --path *osd path* + + Specify an osd path. In most cases, the device list is inferred from the symlinks present in *osd path*. This is usually simpler than explicitly specifying the device(s) with --dev. + +.. option:: --out-dir *dir* + + Output directory for bluefs-export + +.. option:: -l, --log-file *log file* + + file to log to + +.. option:: --log-level *num* + + debug log level. Default is 30 (extremely verbose), 20 is very + verbose, 10 is verbose, and 1 is not very verbose. + +.. option:: --deep + + deep scrub/repair (read and validate object data, not just metadata) + +.. option:: --allocator *name* + + Useful for *free-dump* and *free-score* actions. Selects allocator(s). + +Device labels +============= + +Every BlueStore block device has a single block label at the beginning of the +device. You can dump the contents of the label with:: + + ceph-bluestore-tool show-label --dev *device* + +The main device will have a lot of metadata, including information +that used to be stored in small files in the OSD data directory. The +auxiliary devices (db and wal) will only have the minimum required +fields (OSD UUID, size, device type, birth time). + +OSD directory priming +===================== + +You can generate the content for an OSD data directory that can start up a +BlueStore OSD with the *prime-osd-dir* command:: + + ceph-bluestore-tool prime-osd-dir --dev *main device* --path /var/lib/ceph/osd/ceph-*id* + +BlueFS log rescue +===================== + +Some versions of BlueStore were susceptible to BlueFS log growing extremaly large - +beyond the point of making booting OSD impossible. This state is indicated by +booting that takes very long and fails in _replay function. + +This can be fixed by:: + ceph-bluestore-tool fsck --path *osd path* --bluefs_replay_recovery=true + +It is advised to first check if rescue process would be successfull:: + ceph-bluestore-tool fsck --path *osd path* \ + --bluefs_replay_recovery=true --bluefs_replay_recovery_disable_compact=true + +If above fsck is successfull fix procedure can be applied. + +Availability +============ + +**ceph-bluestore-tool** is part of Ceph, a massively scalable, +open-source, distributed storage system. Please refer to the Ceph +documentation at http://ceph.com/docs for more information. + + +See also +======== + +:doc:`ceph-osd <ceph-osd>`\(8) diff --git a/doc/man/8/ceph-clsinfo.rst b/doc/man/8/ceph-clsinfo.rst new file mode 100644 index 00000000..0188ce13 --- /dev/null +++ b/doc/man/8/ceph-clsinfo.rst @@ -0,0 +1,49 @@ +:orphan: + +=============================================== + ceph-clsinfo -- show class object information +=============================================== + +.. program:: ceph-clsinfo + +Synopsis +======== + +| **ceph-clsinfo** [ *options* ] ... *filename* + + +Description +=========== + +**ceph-clsinfo** can show name, version, and architecture information +about a specific class object. + + +Options +======= + +.. option:: -n, --name + + Shows the class name + +.. option:: -v, --version + + Shows the class version + +.. option:: -a, --arch + + Shows the class architecture + + +Availability +============ + +**ceph-clsinfo** is part of Ceph, a massively scalable, open-source, distributed storage system. Please +refer to the Ceph documentation at http://ceph.com/docs for more +information. + + +See also +======== + +:doc:`ceph <ceph>`\(8) diff --git a/doc/man/8/ceph-conf.rst b/doc/man/8/ceph-conf.rst new file mode 100644 index 00000000..3743813e --- /dev/null +++ b/doc/man/8/ceph-conf.rst @@ -0,0 +1,142 @@ +:orphan: + +================================== + ceph-conf -- ceph conf file tool +================================== + +.. program:: ceph-conf + +Synopsis +======== + +| **ceph-conf** -c *conffile* --list-all-sections +| **ceph-conf** -c *conffile* -L +| **ceph-conf** -c *conffile* -l *prefix* +| **ceph-conf** *key* -s *section1* ... +| **ceph-conf** [-s *section* ] [-r] --lookup *key* +| **ceph-conf** [-s *section* ] *key* + + +Description +=========== + +**ceph-conf** is a utility for getting information from a ceph +configuration file. As with most Ceph programs, you can specify which +Ceph configuration file to use with the ``-c`` flag. + +Note that unlike other ceph tools, **ceph-conf** will *only* read from +config files (or return compiled-in default values)--it will *not* +fetch config values from the monitor cluster. For this reason it is +recommended that **ceph-conf** only be used in legacy environments +that are strictly config-file based. New deployments and tools should +instead rely on either querying the monitor explicitly for +configuration (e.g., ``ceph config get <daemon> <option>``) or use +daemons themselves to fetch effective config options (e.g., +``ceph-osd -i 123 --show-config-value osd_data``). The latter option +has the advantages of drawing from compiled-in defaults (which +occasionally vary between daemons), config files, and the monitor's +config database, providing the exact value that that daemon would be +using if it were started. + +Actions +======= + +**ceph-conf** performs one of the following actions: + +.. option:: -L, --list-all-sections + + list all sections in the configuration file. + +.. option:: -l, --list-sections *prefix* + + list the sections with the given *prefix*. For example, ``--list-sections mon`` + would list all sections beginning with ``mon``. + +.. option:: --lookup *key* + + search and print the specified configuration setting. Note: ``--lookup`` is + the default action. If no other actions are given on the command line, we will + default to doing a lookup. + +.. option:: -h, --help + + print a summary of usage. + + +Options +======= + +.. option:: -c *conffile* + + the Ceph configuration file. + +.. option:: --filter-key *key* + + filter section list to only include sections with given *key* defined. + +.. option:: --filter-key-value *key* ``=`` *value* + + filter section list to only include sections with given *key*/*value* pair. + +.. option:: --name *type.id* + + the Ceph name in which the sections are searched (default 'client.admin'). + For example, if we specify ``--name osd.0``, the following sections will be + searched: [osd.0], [osd], [global] + +.. option:: -r, --resolve-search + + search for the first file that exists and can be opened in the resulted + comma delimited search list. + +.. option:: -s, --section + + additional sections to search. These additional sections will be searched + before the sections that would normally be searched. As always, the first + matching entry we find will be returned. + + +Examples +======== + +To find out what value osd 0 will use for the "osd data" option:: + + ceph-conf -c foo.conf --name osd.0 --lookup "osd data" + +To find out what value will mds a use for the "log file" option:: + + ceph-conf -c foo.conf --name mds.a "log file" + +To list all sections that begin with "osd":: + + ceph-conf -c foo.conf -l osd + +To list all sections:: + + ceph-conf -c foo.conf -L + +To print the path of the "keyring" used by "client.0":: + + ceph-conf --name client.0 -r -l keyring + + +Files +===== + +``/etc/ceph/$cluster.conf``, ``~/.ceph/$cluster.conf``, ``$cluster.conf`` + +the Ceph configuration files to use if not specified. + + +Availability +============ + +**ceph-conf** is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer +to the Ceph documentation at http://ceph.com/docs for more +information. + + +See also +======== + +:doc:`ceph <ceph>`\(8), diff --git a/doc/man/8/ceph-create-keys.rst b/doc/man/8/ceph-create-keys.rst new file mode 100644 index 00000000..20b6560b --- /dev/null +++ b/doc/man/8/ceph-create-keys.rst @@ -0,0 +1,67 @@ +:orphan: + +=============================================== +ceph-create-keys -- ceph keyring generate tool +=============================================== + +.. program:: ceph-create-keys + +Synopsis +======== + +| **ceph-create-keys** [-h] [-v] [-t seconds] [--cluster *name*] --id *id* + + +Description +=========== + +:program:`ceph-create-keys` is a utility to generate bootstrap keyrings using +the given monitor when it is ready. + +It creates following auth entities (or users) + +``client.admin`` + + and its key for your client host. + +``client.bootstrap-{osd, rgw, mds}`` + + and their keys for bootstrapping corresponding services + +To list all users in the cluster:: + + ceph auth ls + + +Options +======= + +.. option:: --cluster + + name of the cluster (default 'ceph'). + +.. option:: -t + + time out after **seconds** (default: 600) waiting for a response from the monitor + +.. option:: -i, --id + + id of a ceph-mon that is coming up. **ceph-create-keys** will wait until it joins quorum. + +.. option:: -v, --verbose + + be more verbose. + + +Availability +============ + +**ceph-create-keys** is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer +to the Ceph documentation at http://ceph.com/docs for more +information. + + +See also +======== + +:doc:`ceph <ceph>`\(8) diff --git a/doc/man/8/ceph-debugpack.rst b/doc/man/8/ceph-debugpack.rst new file mode 100644 index 00000000..4f2c4f2f --- /dev/null +++ b/doc/man/8/ceph-debugpack.rst @@ -0,0 +1,50 @@ +:orphan: + +============================================= + ceph-debugpack -- ceph debug packer utility +============================================= + +.. program:: ceph-debugpack + +Synopsis +======== + +| **ceph-debugpack** [ *options* ] *filename.tar.gz* + + +Description +=========== + +**ceph-debugpack** will build a tarball containing various items that are +useful for debugging crashes. The resulting tarball can be shared with +Ceph developers when debugging a problem. + +The tarball will include the binaries for ceph-mds, ceph-osd, and ceph-mon, radosgw, any +log files, the ceph.conf configuration file, any core files we can +find, and (if the system is running) dumps of the current cluster state +as reported by 'ceph report'. + + +Options +======= + +.. option:: -c ceph.conf, --conf=ceph.conf + + Use *ceph.conf* configuration file instead of the default + ``/etc/ceph/ceph.conf`` to determine monitor addresses during + startup. + + +Availability +============ + +**ceph-debugpack** is part of Ceph, a massively scalable, open-source, distributed storage system. Please +refer to the Ceph documentation at http://ceph.com/docs for more +information. + + +See also +======== + +:doc:`ceph <ceph>`\(8) +:doc:`ceph-post-file <ceph-post-file>`\(8) diff --git a/doc/man/8/ceph-dencoder.rst b/doc/man/8/ceph-dencoder.rst new file mode 100644 index 00000000..09032aa7 --- /dev/null +++ b/doc/man/8/ceph-dencoder.rst @@ -0,0 +1,151 @@ +:orphan: + +============================================== + ceph-dencoder -- ceph encoder/decoder utility +============================================== + +.. program:: ceph-dencoder + +Synopsis +======== + +| **ceph-dencoder** [commands...] + + +Description +=========== + +**ceph-dencoder** is a utility to encode, decode, and dump ceph data +structures. It is used for debugging and for testing inter-version +compatibility. + +**ceph-dencoder** takes a simple list of commands and performs them +in order. + +Commands +======== + +.. option:: version + + Print the version string for the **ceph-dencoder** binary. + +.. option:: import <file> + + Read a binary blob of encoded data from the given file. It will be + placed in an in-memory buffer. + +.. option:: export <file> + + Write the contents of the current in-memory buffer to the given + file. + +.. option:: list_types + + List the data types known to this build of **ceph-dencoder**. + +.. option:: type <name> + + Select the given type for future ``encode`` or ``decode`` operations. + +.. option:: skip <bytes> + + Seek <bytes> into the imported file before reading data structure, use + this with objects that have a preamble/header before the object of interest. + +.. option:: decode + + Decode the contents of the in-memory buffer into an instance of the + previously selected type. If there is an error, report it. + +.. option:: encode + + Encode the contents of the in-memory instance of the previously + selected type to the in-memory buffer. + +.. option:: dump_json + + Print a JSON-formatted description of the in-memory object. + +.. option:: count_tests + + Print the number of built-in test instances of the previously + selected type that **ceph-dencoder** is able to generate. + +.. option:: select_test <n> + + Select the given build-in test instance as a the in-memory instance + of the type. + +.. option:: get_features + + Print the decimal value of the feature set supported by this version + of **ceph-dencoder**. Each bit represents a feature. These correspond to + CEPH_FEATURE_* defines in src/include/ceph_features.h. + +.. option:: set_features <f> + + Set the feature bits provided to ``encode`` to *f*. This allows + you to encode objects such that they can be understood by old + versions of the software (for those types that support it). + +Example +======= + +Say you want to examine an attribute on an object stored by ``ceph-osd``. You can do this: + +:: + + $ cd /mnt/osd.12/current/2.b_head + $ attr -l foo_bar_head_EFE6384B + Attribute "ceph.snapset" has a 31 byte value for foo_bar_head_EFE6384B + Attribute "ceph._" has a 195 byte value for foo_bar_head_EFE6384B + $ attr foo_bar_head_EFE6384B -g ceph._ -q > /tmp/a + $ ceph-dencoder type object_info_t import /tmp/a decode dump_json + { "oid": { "oid": "foo", + "key": "bar", + "snapid": -2, + "hash": 4024842315, + "max": 0}, + "locator": { "pool": 2, + "preferred": -1, + "key": "bar"}, + "category": "", + "version": "9'1", + "prior_version": "0'0", + "last_reqid": "client.4116.0:1", + "size": 1681, + "mtime": "2012-02-21 08:58:23.666639", + "lost": 0, + "wrlock_by": "unknown.0.0:0", + "snaps": [], + "truncate_seq": 0, + "truncate_size": 0, + "watchers": {}} + +Alternatively, perhaps you wish to dump an internal CephFS metadata object, you might +do that like this: + +:: + + $ rados -p metadata get mds_snaptable mds_snaptable.bin + $ ceph-dencoder type SnapServer skip 8 import mds_snaptable.bin decode dump_json + { "snapserver": { "last_snap": 1, + "pending_noop": [], + "snaps": [], + "need_to_purge": {}, + "pending_create": [], + "pending_destroy": []}} + + +Availability +============ + +**ceph-dencoder** is part of Ceph, a massively scalable, open-source, distributed storage system. Please +refer to the Ceph documentation at http://ceph.com/docs for more +information. + + +See also +======== + +:doc:`ceph <ceph>`\(8) diff --git a/doc/man/8/ceph-deploy.rst b/doc/man/8/ceph-deploy.rst new file mode 100644 index 00000000..3d099252 --- /dev/null +++ b/doc/man/8/ceph-deploy.rst @@ -0,0 +1,529 @@ +:orphan: + +.. _ceph-deploy: + +===================================== + ceph-deploy -- Ceph deployment tool +===================================== + +.. program:: ceph-deploy + +Synopsis +======== + +| **ceph-deploy** **new** [*initial-monitor-node(s)*] + +| **ceph-deploy** **install** [*ceph-node*] [*ceph-node*...] + +| **ceph-deploy** **mon** *create-initial* + +| **ceph-deploy** **osd** *create* *--data* *device* *ceph-node* + +| **ceph-deploy** **admin** [*admin-node*][*ceph-node*...] + +| **ceph-deploy** **purgedata** [*ceph-node*][*ceph-node*...] + +| **ceph-deploy** **forgetkeys** + +Description +=========== + +:program:`ceph-deploy` is a tool which allows easy and quick deployment of a +Ceph cluster without involving complex and detailed manual configuration. It +uses ssh to gain access to other Ceph nodes from the admin node, sudo for +administrator privileges on them and the underlying Python scripts automates +the manual process of Ceph installation on each node from the admin node itself. +It can be easily run on an workstation and doesn't require servers, databases or +any other automated tools. With :program:`ceph-deploy`, it is really easy to set +up and take down a cluster. However, it is not a generic deployment tool. It is +a specific tool which is designed for those who want to get Ceph up and running +quickly with only the unavoidable initial configuration settings and without the +overhead of installing other tools like ``Chef``, ``Puppet`` or ``Juju``. Those +who want to customize security settings, partitions or directory locations and +want to set up a cluster following detailed manual steps, should use other tools +i.e, ``Chef``, ``Puppet``, ``Juju`` or ``Crowbar``. + +With :program:`ceph-deploy`, you can install Ceph packages on remote nodes, +create a cluster, add monitors, gather/forget keys, add OSDs and metadata +servers, configure admin hosts or take down the cluster. + +Commands +======== + +new +--- + +Start deploying a new cluster and write a configuration file and keyring for it. +It tries to copy ssh keys from admin node to gain passwordless ssh to monitor +node(s), validates host IP, creates a cluster with a new initial monitor node or +nodes for monitor quorum, a ceph configuration file, a monitor secret keyring and +a log file for the new cluster. It populates the newly created Ceph configuration +file with ``fsid`` of cluster, hostnames and IP addresses of initial monitor +members under ``[global]`` section. + +Usage:: + + ceph-deploy new [MON][MON...] + +Here, [MON] is the initial monitor hostname (short hostname i.e, ``hostname -s``). + +Other options like :option:`--no-ssh-copykey`, :option:`--fsid`, +:option:`--cluster-network` and :option:`--public-network` can also be used with +this command. + +If more than one network interface is used, ``public network`` setting has to be +added under ``[global]`` section of Ceph configuration file. If the public subnet +is given, ``new`` command will choose the one IP from the remote host that exists +within the subnet range. Public network can also be added at runtime using +:option:`--public-network` option with the command as mentioned above. + + +install +------- + +Install Ceph packages on remote hosts. As a first step it installs +``yum-plugin-priorities`` in admin and other nodes using passwordless ssh and sudo +so that Ceph packages from upstream repository get more priority. It then detects +the platform and distribution for the hosts and installs Ceph normally by +downloading distro compatible packages if adequate repo for Ceph is already added. +``--release`` flag is used to get the latest release for installation. During +detection of platform and distribution before installation, if it finds the +``distro.init`` to be ``sysvinit`` (Fedora, CentOS/RHEL etc), it doesn't allow +installation with custom cluster name and uses the default name ``ceph`` for the +cluster. + +If the user explicitly specifies a custom repo url with :option:`--repo-url` for +installation, anything detected from the configuration will be overridden and +the custom repository location will be used for installation of Ceph packages. +If required, valid custom repositories are also detected and installed. In case +of installation from a custom repo a boolean is used to determine the logic +needed to proceed with a custom repo installation. A custom repo install helper +is used that goes through config checks to retrieve repos (and any extra repos +defined) and installs them. ``cd_conf`` is the object built from ``argparse`` +that holds the flags and information needed to determine what metadata from the +configuration is to be used. + +A user can also opt to install only the repository without installing Ceph and +its dependencies by using :option:`--repo` option. + +Usage:: + + ceph-deploy install [HOST][HOST...] + +Here, [HOST] is/are the host node(s) where Ceph is to be installed. + +An option ``--release`` is used to install a release known as CODENAME +(default: firefly). + +Other options like :option:`--testing`, :option:`--dev`, :option:`--adjust-repos`, +:option:`--no-adjust-repos`, :option:`--repo`, :option:`--local-mirror`, +:option:`--repo-url` and :option:`--gpg-url` can also be used with this command. + + +mds +--- + +Deploy Ceph mds on remote hosts. A metadata server is needed to use CephFS and +the ``mds`` command is used to create one on the desired host node. It uses the +subcommand ``create`` to do so. ``create`` first gets the hostname and distro +information of the desired mds host. It then tries to read the ``bootstrap-mds`` +key for the cluster and deploy it in the desired host. The key generally has a +format of ``{cluster}.bootstrap-mds.keyring``. If it doesn't finds a keyring, +it runs ``gatherkeys`` to get the keyring. It then creates a mds on the desired +host under the path ``/var/lib/ceph/mds/`` in ``/var/lib/ceph/mds/{cluster}-{name}`` +format and a bootstrap keyring under ``/var/lib/ceph/bootstrap-mds/`` in +``/var/lib/ceph/bootstrap-mds/{cluster}.keyring`` format. It then runs appropriate +commands based on ``distro.init`` to start the ``mds``. + +Usage:: + + ceph-deploy mds create [HOST[:DAEMON-NAME]] [HOST[:DAEMON-NAME]...] + +The [DAEMON-NAME] is optional. + + +mon +--- + +Deploy Ceph monitor on remote hosts. ``mon`` makes use of certain subcommands +to deploy Ceph monitors on other nodes. + +Subcommand ``create-initial`` deploys for monitors defined in +``mon initial members`` under ``[global]`` section in Ceph configuration file, +wait until they form quorum and then gatherkeys, reporting the monitor status +along the process. If monitors don't form quorum the command will eventually +time out. + +Usage:: + + ceph-deploy mon create-initial + +Subcommand ``create`` is used to deploy Ceph monitors by explicitly specifying +the hosts which are desired to be made monitors. If no hosts are specified it +will default to use the ``mon initial members`` defined under ``[global]`` +section of Ceph configuration file. ``create`` first detects platform and distro +for desired hosts and checks if hostname is compatible for deployment. It then +uses the monitor keyring initially created using ``new`` command and deploys the +monitor in desired host. If multiple hosts were specified during ``new`` command +i.e, if there are multiple hosts in ``mon initial members`` and multiple keyrings +were created then a concatenated keyring is used for deployment of monitors. In +this process a keyring parser is used which looks for ``[entity]`` sections in +monitor keyrings and returns a list of those sections. A helper is then used to +collect all keyrings into a single blob that will be used to inject it to monitors +with :option:`--mkfs` on remote nodes. All keyring files are concatenated to be +in a directory ending with ``.keyring``. During this process the helper uses list +of sections returned by keyring parser to check if an entity is already present +in a keyring and if not, adds it. The concatenated keyring is used for deployment +of monitors to desired multiple hosts. + +Usage:: + + ceph-deploy mon create [HOST] [HOST...] + +Here, [HOST] is hostname of desired monitor host(s). + +Subcommand ``add`` is used to add a monitor to an existing cluster. It first +detects platform and distro for desired host and checks if hostname is compatible +for deployment. It then uses the monitor keyring, ensures configuration for new +monitor host and adds the monitor to the cluster. If the section for the monitor +exists and defines a monitor address that will be used, otherwise it will fallback by +resolving the hostname to an IP. If :option:`--address` is used it will override +all other options. After adding the monitor to the cluster, it gives it some time +to start. It then looks for any monitor errors and checks monitor status. Monitor +errors arise if the monitor is not added in ``mon initial members``, if it doesn't +exist in ``monmap`` and if neither ``public_addr`` nor ``public_network`` keys +were defined for monitors. Under such conditions, monitors may not be able to +form quorum. Monitor status tells if the monitor is up and running normally. The +status is checked by running ``ceph daemon mon.hostname mon_status`` on remote +end which provides the output and returns a boolean status of what is going on. +``False`` means a monitor that is not fine even if it is up and running, while +``True`` means the monitor is up and running correctly. + +Usage:: + + ceph-deploy mon add [HOST] + + ceph-deploy mon add [HOST] --address [IP] + +Here, [HOST] is the hostname and [IP] is the IP address of the desired monitor +node. Please note, unlike other ``mon`` subcommands, only one node can be +specified at a time. + +Subcommand ``destroy`` is used to completely remove monitors on remote hosts. +It takes hostnames as arguments. It stops the monitor, verifies if ``ceph-mon`` +daemon really stopped, creates an archive directory ``mon-remove`` under +``/var/lib/ceph/``, archives old monitor directory in +``{cluster}-{hostname}-{stamp}`` format in it and removes the monitor from +cluster by running ``ceph remove...`` command. + +Usage:: + + ceph-deploy mon destroy [HOST] [HOST...] + +Here, [HOST] is hostname of monitor that is to be removed. + + +gatherkeys +---------- + +Gather authentication keys for provisioning new nodes. It takes hostnames as +arguments. It checks for and fetches ``client.admin`` keyring, monitor keyring +and ``bootstrap-mds/bootstrap-osd`` keyring from monitor host. These +authentication keys are used when new ``monitors/OSDs/MDS`` are added to the +cluster. + +Usage:: + + ceph-deploy gatherkeys [HOST] [HOST...] + +Here, [HOST] is hostname of the monitor from where keys are to be pulled. + + +disk +---- + +Manage disks on a remote host. It actually triggers the ``ceph-volume`` utility +and its subcommands to manage disks. + +Subcommand ``list`` lists disk partitions and Ceph OSDs. + +Usage:: + + ceph-deploy disk list HOST + + +Subcommand ``zap`` zaps/erases/destroys a device's partition table and +contents. It actually uses ``ceph-volume lvm zap`` remotely, alternatively +allowing someone to remove the Ceph metadata from the logical volume. + +osd +--- + +Manage OSDs by preparing data disk on remote host. ``osd`` makes use of certain +subcommands for managing OSDs. + +Subcommand ``create`` prepares a device for Ceph OSD. It first checks against +multiple OSDs getting created and warns about the possibility of more than the +recommended which would cause issues with max allowed PIDs in a system. It then +reads the bootstrap-osd key for the cluster or writes the bootstrap key if not +found. +It then uses :program:`ceph-volume` utility's ``lvm create`` subcommand to +prepare the disk, (and journal if using filestore) and deploy the OSD on the desired host. +Once prepared, it gives some time to the OSD to start and checks for any +possible errors and if found, reports to the user. + +Bluestore Usage:: + + ceph-deploy osd create --data DISK HOST + +Filestore Usage:: + + ceph-deploy osd create --data DISK --journal JOURNAL HOST + + +.. note:: For other flags available, please see the man page or the --help menu + on ceph-deploy osd create + +Subcommand ``list`` lists devices associated to Ceph as part of an OSD. +It uses the ``ceph-volume lvm list`` output that has a rich output, mapping +OSDs to devices and other interesting information about the OSD setup. + +Usage:: + + ceph-deploy osd list HOST + + +admin +----- + +Push configuration and ``client.admin`` key to a remote host. It takes +the ``{cluster}.client.admin.keyring`` from admin node and writes it under +``/etc/ceph`` directory of desired node. + +Usage:: + + ceph-deploy admin [HOST] [HOST...] + +Here, [HOST] is desired host to be configured for Ceph administration. + + +config +------ + +Push/pull configuration file to/from a remote host. It uses ``push`` subcommand +to takes the configuration file from admin host and write it to remote host under +``/etc/ceph`` directory. It uses ``pull`` subcommand to do the opposite i.e, pull +the configuration file under ``/etc/ceph`` directory of remote host to admin node. + +Usage:: + + ceph-deploy config push [HOST] [HOST...] + + ceph-deploy config pull [HOST] [HOST...] + +Here, [HOST] is the hostname of the node where config file will be pushed to or +pulled from. + + +uninstall +--------- + +Remove Ceph packages from remote hosts. It detects the platform and distro of +selected host and uninstalls Ceph packages from it. However, some dependencies +like ``librbd1`` and ``librados2`` will not be removed because they can cause +issues with ``qemu-kvm``. + +Usage:: + + ceph-deploy uninstall [HOST] [HOST...] + +Here, [HOST] is hostname of the node from where Ceph will be uninstalled. + + +purge +----- + +Remove Ceph packages from remote hosts and purge all data. It detects the +platform and distro of selected host, uninstalls Ceph packages and purges all +data. However, some dependencies like ``librbd1`` and ``librados2`` will not be +removed because they can cause issues with ``qemu-kvm``. + +Usage:: + + ceph-deploy purge [HOST] [HOST...] + +Here, [HOST] is hostname of the node from where Ceph will be purged. + + +purgedata +--------- + +Purge (delete, destroy, discard, shred) any Ceph data from ``/var/lib/ceph``. +Once it detects the platform and distro of desired host, it first checks if Ceph +is still installed on the selected host and if installed, it won't purge data +from it. If Ceph is already uninstalled from the host, it tries to remove the +contents of ``/var/lib/ceph``. If it fails then probably OSDs are still mounted +and needs to be unmounted to continue. It unmount the OSDs and tries to remove +the contents of ``/var/lib/ceph`` again and checks for errors. It also removes +contents of ``/etc/ceph``. Once all steps are successfully completed, all the +Ceph data from the selected host are removed. + +Usage:: + + ceph-deploy purgedata [HOST] [HOST...] + +Here, [HOST] is hostname of the node from where Ceph data will be purged. + + +forgetkeys +---------- + +Remove authentication keys from the local directory. It removes all the +authentication keys i.e, monitor keyring, client.admin keyring, bootstrap-osd +and bootstrap-mds keyring from the node. + +Usage:: + + ceph-deploy forgetkeys + + +pkg +--- + +Manage packages on remote hosts. It is used for installing or removing packages +from remote hosts. The package names for installation or removal are to be +specified after the command. Two options :option:`--install` and +:option:`--remove` are used for this purpose. + +Usage:: + + ceph-deploy pkg --install [PKGs] [HOST] [HOST...] + + ceph-deploy pkg --remove [PKGs] [HOST] [HOST...] + +Here, [PKGs] is comma-separated package names and [HOST] is hostname of the +remote node where packages are to be installed or removed from. + + +Options +======= + +.. option:: --address + + IP address of the host node to be added to the cluster. + +.. option:: --adjust-repos + + Install packages modifying source repos. + +.. option:: --ceph-conf + + Use (or reuse) a given ``ceph.conf`` file. + +.. option:: --cluster + + Name of the cluster. + +.. option:: --dev + + Install a bleeding edge built from Git branch or tag (default: master). + +.. option:: --cluster-network + + Specify the (internal) cluster network. + +.. option:: --dmcrypt + + Encrypt [data-path] and/or journal devices with ``dm-crypt``. + +.. option:: --dmcrypt-key-dir + + Directory where ``dm-crypt`` keys are stored. + +.. option:: --install + + Comma-separated package(s) to install on remote hosts. + +.. option:: --fs-type + + Filesystem to use to format disk ``(xfs, btrfs or ext4)``. Note that support for btrfs and ext4 is no longer tested or recommended; please use xfs. + +.. option:: --fsid + + Provide an alternate FSID for ``ceph.conf`` generation. + +.. option:: --gpg-url + + Specify a GPG key url to be used with custom repos (defaults to ceph.com). + +.. option:: --keyrings + + Concatenate multiple keyrings to be seeded on new monitors. + +.. option:: --local-mirror + + Fetch packages and push them to hosts for a local repo mirror. + +.. option:: --mkfs + + Inject keys to MONs on remote nodes. + +.. option:: --no-adjust-repos + + Install packages without modifying source repos. + +.. option:: --no-ssh-copykey + + Do not attempt to copy ssh keys. + +.. option:: --overwrite-conf + + Overwrite an existing conf file on remote host (if present). + +.. option:: --public-network + + Specify the public network for a cluster. + +.. option:: --remove + + Comma-separated package(s) to remove from remote hosts. + +.. option:: --repo + + Install repo files only (skips package installation). + +.. option:: --repo-url + + Specify a repo url that mirrors/contains Ceph packages. + +.. option:: --testing + + Install the latest development release. + +.. option:: --username + + The username to connect to the remote host. + +.. option:: --version + + The current installed version of :program:`ceph-deploy`. + +.. option:: --zap-disk + + Destroy the partition table and content of a disk. + + +Availability +============ + +:program:`ceph-deploy` is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer to +the documentation at https://ceph.com/ceph-deploy/docs for more information. + + +See also +======== + +:doc:`ceph-mon <ceph-mon>`\(8), +:doc:`ceph-osd <ceph-osd>`\(8), +:doc:`ceph-volume <ceph-volume>`\(8), +:doc:`ceph-mds <ceph-mds>`\(8) diff --git a/doc/man/8/ceph-diff-sorted.rst b/doc/man/8/ceph-diff-sorted.rst new file mode 100644 index 00000000..99e95833 --- /dev/null +++ b/doc/man/8/ceph-diff-sorted.rst @@ -0,0 +1,71 @@ +:orphan: + +========================================================== + ceph-diff-sorted -- compare two sorted files line by line +========================================================== + +.. program:: ceph-diff-sorted + +Synopsis +======== + +| **ceph-diff-sorted** *file1* *file2* + +Description +=========== + +:program:`ceph-diff-sorted` is a simplifed *diff* utility optimized +for comparing two files with lines that are lexically sorted. + +The output is simplified in comparison to that of the standard `diff` +tool available in POSIX systems. Angle brackets ('<' and '>') are used +to show lines that appear in one file but not the other. The output is +not compatible with the `patch` tool. + +This tool was created in order to perform diffs of large files (e.g., +containing billions of lines) that the standard `diff` tool cannot +handle efficiently. Knowing that the lines are sorted allows this to +be done efficiently with minimal memory overhead. + +The sorting of each file needs to be done lexcially. Most POSIX +systems use the *LANG* environment variable to determine the `sort` +tool's sorting order. To sort lexically we would need something such +as: + + $ LANG=C sort some-file.txt >some-file-sorted.txt + +Examples +======== + +Compare two files:: + + $ ceph-diff-sorted fileA.txt fileB.txt + +Exit Status +=========== + +When complete, the exit status will be set to one of the following: + +0 + files same +1 + files different +2 + usage problem (e.g., wrong number of command-line arguments) +3 + problem opening input file +4 + bad file content (e.g., unsorted order or empty lines) + + +Availability +============ + +:program:`ceph-diff-sorted` is part of Ceph, a massively scalable, +open-source, distributed storage system. Please refer to the Ceph +documentation at http://ceph.com/docs for more information. + +See also +======== + +:doc:`rgw-orphan-list <rgw-orphan-list>`\(8) diff --git a/doc/man/8/ceph-fuse.rst b/doc/man/8/ceph-fuse.rst new file mode 100644 index 00000000..95efebbd --- /dev/null +++ b/doc/man/8/ceph-fuse.rst @@ -0,0 +1,82 @@ +:orphan: + +========================================= + ceph-fuse -- FUSE-based client for ceph +========================================= + +.. program:: ceph-fuse + +Synopsis +======== + +| **ceph-fuse** [-n *client.username*] [ -m *monaddr*:*port* ] *mountpoint* [ *fuse options* ] + + +Description +=========== + +**ceph-fuse** is a FUSE (File system in USErspace) client for Ceph +distributed file system. It will mount a ceph file system specified +via the -m option or described by ceph.conf (see below) at the +specific mount point. See `Mount CephFS using FUSE`_ for detailed +information. + +The file system can be unmounted with:: + + fusermount -u mountpoint + +or by sending ``SIGINT`` to the ``ceph-fuse`` process. + + +Options +======= + +Any options not recognized by ceph-fuse will be passed on to libfuse. + +.. option:: -o opt,[opt...] + + Mount options. + +.. option:: -d + + Run in foreground, send all log output to stderr and enable FUSE debugging (-o debug). + +.. option:: -c ceph.conf, --conf=ceph.conf + + Use *ceph.conf* configuration file instead of the default + ``/etc/ceph/ceph.conf`` to determine monitor addresses during startup. + +.. option:: -m monaddress[:port] + + Connect to specified monitor (instead of looking through ceph.conf). + +.. option:: -k <path-to-keyring> + + Provide path to keyring; useful when it's absent in standard locations. + +.. option:: --client_mountpoint/-r root_directory + + Use root_directory as the mounted root, rather than the full Ceph tree. + +.. option:: -f + + Foreground: do not daemonize after startup (run in foreground). Do not generate a pid file. + +.. option:: -s + + Disable multi-threaded operation. + +Availability +============ + +**ceph-fuse** is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer to +the Ceph documentation at http://ceph.com/docs for more information. + + +See also +======== + +fusermount(8), +:doc:`ceph <ceph>`\(8) + +.. _Mount CephFS using FUSE: ../../../cephfs/fuse/ diff --git a/doc/man/8/ceph-kvstore-tool.rst b/doc/man/8/ceph-kvstore-tool.rst new file mode 100644 index 00000000..1eb99c03 --- /dev/null +++ b/doc/man/8/ceph-kvstore-tool.rst @@ -0,0 +1,98 @@ +:orphan: + +===================================================== + ceph-kvstore-tool -- ceph kvstore manipulation tool +===================================================== + +.. program:: ceph-kvstore-tool + +Synopsis +======== + +| **ceph-kvstore-tool** <leveldb|rocksdb|bluestore-kv> <store path> *command* [args...] + + +Description +=========== + +:program:`ceph-kvstore-tool` is a kvstore manipulation tool. It allows users to manipulate +leveldb/rocksdb's data (like OSD's omap) offline. + +Commands +======== + +:program:`ceph-kvstore-tool` utility uses many commands for debugging purpose +which are as follows: + +:command:`list [prefix]` + Print key of all KV pairs stored with the URL encoded prefix. + +:command:`list-crc [prefix]` + Print CRC of all KV pairs stored with the URL encoded prefix. + +:command:`dump [prefix]` + Print key and value of all KV pairs stored with the URL encoded prefix. + +:command:`exists <prefix> [key]` + Check if there is any KV pair stored with the URL encoded prefix. If key + is also specified, check for the key with the prefix instead. + +:command:`get <prefix> <key> [out <file>]` + Get the value of the KV pair stored with the URL encoded prefix and key. + If file is also specified, write the value to the file. + +:command:`crc <prefix> <key>` + Get the CRC of the KV pair stored with the URL encoded prefix and key. + +:command:`get-size [<prefix> <key>]` + Get estimated store size or size of value specified by prefix and key. + +:command:`set <prefix> <key> [ver <N>|in <file>]` + Set the value of the KV pair stored with the URL encoded prefix and key. + The value could be *version_t* or text. + +:command:`rm <prefix> <key>` + Remove the KV pair stored with the URL encoded prefix and key. + +:command:`rm-prefix <prefix>` + Remove all KV pairs stored with the URL encoded prefix. + +:command:`store-copy <path> [num-keys-per-tx]` + Copy all KV pairs to another directory specified by ``path``. + [num-keys-per-tx] is the number of KV pairs copied for a transaction. + +:command:`store-crc <path>` + Store CRC of all KV pairs to a file specified by ``path``. + +:command:`compact` + Subcommand ``compact`` is used to compact all data of kvstore. It will open + the database, and trigger a database's compaction. After compaction, some + disk space may be released. + +:command:`compact-prefix <prefix>` + Compact all entries specified by the URL encoded prefix. + +:command:`compact-range <prefix> <start> <end>` + Compact some entries specified by the URL encoded prefix and range. + +:command:`destructive-repair` + Make a (potentially destructive) effort to recover a corrupted database. + Note that in the case of rocksdb this may corrupt an otherwise uncorrupted + database--use this only as a last resort! + +:command:`stats` + Prints statistics from underlying key-value database. This is only for informative purposes. + Format and information content may vary between releases. For RocksDB information includes + compactions stats, performance counters, memory usage and internal RocksDB stats. + +Availability +============ + +**ceph-kvstore-tool** is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer to +the Ceph documentation at http://ceph.com/docs for more information. + + +See also +======== + +:doc:`ceph <ceph>`\(8) diff --git a/doc/man/8/ceph-mds.rst b/doc/man/8/ceph-mds.rst new file mode 100644 index 00000000..a07b9105 --- /dev/null +++ b/doc/man/8/ceph-mds.rst @@ -0,0 +1,82 @@ +:orphan: + +========================================= + ceph-mds -- ceph metadata server daemon +========================================= + +.. program:: ceph-mds + +Synopsis +======== + +| **ceph-mds** -i <*ID*> [flags] + + +Description +=========== + +**ceph-mds** is the metadata server daemon for the Ceph distributed file +system. One or more instances of ceph-mds collectively manage the file +system namespace, coordinating access to the shared OSD cluster. + +Each ceph-mds daemon instance should have a unique name. The name is used +to identify daemon instances in the ceph.conf. + +Once the daemon has started, the monitor cluster will normally assign +it a logical rank, or put it in a standby pool to take over for +another daemon that crashes. Some of the specified options can cause +other behaviors. + + +Options +======= + +.. option:: -f, --foreground + + Foreground: do not daemonize after startup (run in foreground). Do + not generate a pid file. Useful when run via :doc:`ceph-run + <ceph-run>`\(8). + +.. option:: -d + + Debug mode: like ``-f``, but also send all log output to stderr. + +.. option:: --setuser userorgid + + Set uid after starting. If a username is specified, the user + record is looked up to get a uid and a gid, and the gid is also set + as well, unless --setgroup is also specified. + +.. option:: --setgroup grouporgid + + Set gid after starting. If a group name is specified the group + record is looked up to get a gid. + +.. option:: -c ceph.conf, --conf=ceph.conf + + Use *ceph.conf* configuration file instead of the default + ``/etc/ceph/ceph.conf`` to determine monitor addresses during + startup. + +.. option:: -m monaddress[:port] + + Connect to specified monitor (instead of looking through + ``ceph.conf``). + +.. option:: --id/-i ID + + Set ID portion of the MDS name. + +Availability +============ + +**ceph-mds** is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer to the Ceph documentation at +http://ceph.com/docs for more information. + + +See also +======== + +:doc:`ceph <ceph>`\(8), +:doc:`ceph-mon <ceph-mon>`\(8), +:doc:`ceph-osd <ceph-osd>`\(8) diff --git a/doc/man/8/ceph-mon.rst b/doc/man/8/ceph-mon.rst new file mode 100644 index 00000000..0c2c5792 --- /dev/null +++ b/doc/man/8/ceph-mon.rst @@ -0,0 +1,94 @@ +:orphan: + +================================= + ceph-mon -- ceph monitor daemon +================================= + +.. program:: ceph-mon + +Synopsis +======== + +| **ceph-mon** -i *monid* [ --mon-data *mondatapath* ] + + +Description +=========== + +**ceph-mon** is the cluster monitor daemon for the Ceph distributed +file system. One or more instances of **ceph-mon** form a Paxos +part-time parliament cluster that provides extremely reliable and +durable storage of cluster membership, configuration, and state. + +The *mondatapath* refers to a directory on a local file system storing +monitor data. It is normally specified via the ``mon data`` option in +the configuration file. + +Options +======= + +.. option:: -f, --foreground + + Foreground: do not daemonize after startup (run in foreground). Do + not generate a pid file. Useful when run via :doc:`ceph-run <ceph-run>`\(8). + +.. option:: -d + + Debug mode: like ``-f``, but also send all log output to stderr. + +.. option:: --setuser userorgid + + Set uid after starting. If a username is specified, the user + record is looked up to get a uid and a gid, and the gid is also set + as well, unless --setgroup is also specified. + +.. option:: --setgroup grouporgid + + Set gid after starting. If a group name is specified the group + record is looked up to get a gid. + +.. option:: -c ceph.conf, --conf=ceph.conf + + Use *ceph.conf* configuration file instead of the default + ``/etc/ceph/ceph.conf`` to determine monitor addresses during + startup. + +.. option:: --mkfs + + Initialize the ``mon data`` directory with seed information to form + and initial ceph file system or to join an existing monitor + cluster. Three pieces of information must be provided: + + - The cluster fsid. This can come from a monmap (``--monmap <path>``) or + explicitly via ``--fsid <uuid>``. + - A list of monitors and their addresses. This list of monitors + can come from a monmap (``--monmap <path>``), the ``mon host`` + configuration value (in *ceph.conf* or via ``-m + host1,host2,...``), or (for backward compatibility) the deprecated ``mon addr`` lines in *ceph.conf*. If this + monitor is to be part of the initial monitor quorum for a new + Ceph cluster, then it must be included in the initial list, + matching either the name or address of a monitor in the list. + When matching by address, either the ``public addr`` or ``public + subnet`` options may be used. + - The monitor secret key ``mon.``. This must be included in the + keyring provided via ``--keyring <path>``. + +.. option:: --keyring + + Specify a keyring for use with ``--mkfs``. + + +Availability +============ + +**ceph-mon** is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer +to the Ceph documentation at http://ceph.com/docs for more +information. + + +See also +======== + +:doc:`ceph <ceph>`\(8), +:doc:`ceph-mds <ceph-mds>`\(8), +:doc:`ceph-osd <ceph-osd>`\(8) diff --git a/doc/man/8/ceph-osd.rst b/doc/man/8/ceph-osd.rst new file mode 100644 index 00000000..388e339d --- /dev/null +++ b/doc/man/8/ceph-osd.rst @@ -0,0 +1,134 @@ +:orphan: + +======================================== + ceph-osd -- ceph object storage daemon +======================================== + +.. program:: ceph-osd + +Synopsis +======== + +| **ceph-osd** -i *osdnum* [ --osd-data *datapath* ] [ --osd-journal + *journal* ] [ --mkfs ] [ --mkjournal ] [--flush-journal] [--check-allows-journal] [--check-wants-journal] [--check-needs-journal] [ --mkkey ] + + +Description +=========== + +**ceph-osd** is the object storage daemon for the Ceph distributed file +system. It is responsible for storing objects on a local file system +and providing access to them over the network. + +The datapath argument should be a directory on a xfs file system +where the object data resides. The journal is optional, and is only +useful performance-wise when it resides on a different disk than +datapath with low latency (ideally, an NVRAM device). + + +Options +======= + +.. option:: -f, --foreground + + Foreground: do not daemonize after startup (run in foreground). Do + not generate a pid file. Useful when run via :doc:`ceph-run <ceph-run>`\(8). + +.. option:: -d + + Debug mode: like ``-f``, but also send all log output to stderr. + +.. option:: --setuser userorgid + + Set uid after starting. If a username is specified, the user + record is looked up to get a uid and a gid, and the gid is also set + as well, unless --setgroup is also specified. + +.. option:: --setgroup grouporgid + + Set gid after starting. If a group name is specified the group + record is looked up to get a gid. + +.. option:: --osd-data osddata + + Use object store at *osddata*. + +.. option:: --osd-journal journal + + Journal updates to *journal*. + +.. option:: --check-wants-journal + + Check whether a journal is desired. + +.. option:: --check-allows-journal + + Check whether a journal is allowed. + +.. option:: --check-needs-journal + + Check whether a journal is required. + +.. option:: --mkfs + + Create an empty object repository. This also initializes the journal + (if one is defined). + +.. option:: --mkkey + + Generate a new secret key. This is normally used in combination + with ``--mkfs`` as it is more convenient than generating a key by + hand with :doc:`ceph-authtool <ceph-authtool>`\(8). + +.. option:: --mkjournal + + Create a new journal file to match an existing object repository. + This is useful if the journal device or file is wiped out due to a + disk or file system failure. + +.. option:: --flush-journal + + Flush the journal to permanent store. This runs in the foreground + so you know when it's completed. This can be useful if you want to + resize the journal or need to otherwise destroy it: this guarantees + you won't lose data. + +.. option:: --get-cluster-fsid + + Print the cluster fsid (uuid) and exit. + +.. option:: --get-osd-fsid + + Print the OSD's fsid and exit. The OSD's uuid is generated at + --mkfs time and is thus unique to a particular instantiation of + this OSD. + +.. option:: --get-journal-fsid + + Print the journal's uuid. The journal fsid is set to match the OSD + fsid at --mkfs time. + +.. option:: -c ceph.conf, --conf=ceph.conf + + Use *ceph.conf* configuration file instead of the default + ``/etc/ceph/ceph.conf`` for runtime configuration options. + +.. option:: -m monaddress[:port] + + Connect to specified monitor (instead of looking through + ``ceph.conf``). + + +Availability +============ + +**ceph-osd** is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer to +the Ceph documentation at http://ceph.com/docs for more information. + +See also +======== + +:doc:`ceph <ceph>`\(8), +:doc:`ceph-mds <ceph-mds>`\(8), +:doc:`ceph-mon <ceph-mon>`\(8), +:doc:`ceph-authtool <ceph-authtool>`\(8) diff --git a/doc/man/8/ceph-post-file.rst b/doc/man/8/ceph-post-file.rst new file mode 100644 index 00000000..7e4899f5 --- /dev/null +++ b/doc/man/8/ceph-post-file.rst @@ -0,0 +1,71 @@ +:orphan: + +================================================== + ceph-post-file -- post files for ceph developers +================================================== + +.. program:: ceph-post-file + +Synopsis +======== + +| **ceph-post-file** [-d *description] [-u *user*] *file or dir* ... + + +Description +=========== + +**ceph-post-file** will upload files or directories to ceph.com for +later analysis by Ceph developers. + +Each invocation uploads files or directories to a separate directory +with a unique tag. That tag can be passed to a developer or +referenced in a bug report (http://tracker.ceph.com/). Once the +upload completes, the directory is marked non-readable and +non-writeable to prevent access or modification by other users. + +Warning +======= + +Basic measures are taken to make posted data be visible only to +developers with access to ceph.com infrastructure. However, users +should think twice and/or take appropriate precautions before +posting potentially sensitive data (for example, logs or data +directories that contain Ceph secrets). + + +Options +======= + +.. option:: -d *description*, --description *description* + + Add a short description for the upload. This is a good opportunity + to reference a bug number. There is no default value. + +.. option:: -u *user* + + Set the user metadata for the upload. This defaults to `whoami`@`hostname -f`. + +Examples +======== + +To upload a single log:: + + ceph-post-file /var/log/ceph/ceph-mon.`hostname`.log + +To upload several directories:: + + ceph-post-file -d 'mon data directories' /var/log/ceph/mon/* + + +Availability +============ + +**ceph-post-file** is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer to +the Ceph documentation at http://ceph.com/docs for more information. + +See also +======== + +:doc:`ceph <ceph>`\(8), +:doc:`ceph-debugpack <ceph-debugpack>`\(8), diff --git a/doc/man/8/ceph-rbdnamer.rst b/doc/man/8/ceph-rbdnamer.rst new file mode 100644 index 00000000..123c6e28 --- /dev/null +++ b/doc/man/8/ceph-rbdnamer.rst @@ -0,0 +1,41 @@ +:orphan: + +================================================== + ceph-rbdnamer -- udev helper to name RBD devices +================================================== + +.. program:: ceph-rbdnamer + + +Synopsis +======== + +| **ceph-rbdnamer** *num* + + +Description +=========== + +**ceph-rbdnamer** prints the pool and image name for the given RBD devices +to stdout. It is used by `udev` (using a rule like the one below) to +set up a device symlink. + + +:: + + KERNEL=="rbd[0-9]*", PROGRAM="/usr/bin/ceph-rbdnamer %n", SYMLINK+="rbd/%c{1}/%c{2}" + + +Availability +============ + +**ceph-rbdnamer** is part of Ceph, a massively scalable, open-source, distributed storage system. Please +refer to the Ceph documentation at http://ceph.com/docs for more +information. + + +See also +======== + +:doc:`rbd <rbd>`\(8), +:doc:`ceph <ceph>`\(8) diff --git a/doc/man/8/ceph-run.rst b/doc/man/8/ceph-run.rst new file mode 100644 index 00000000..ed76c284 --- /dev/null +++ b/doc/man/8/ceph-run.rst @@ -0,0 +1,45 @@ +:orphan: + +========================================= + ceph-run -- restart daemon on core dump +========================================= + +.. program:: ceph-run + +Synopsis +======== + +| **ceph-run** *command* ... + + +Description +=========== + +**ceph-run** is a simple wrapper that will restart a daemon if it exits +with a signal indicating it crashed and possibly core dumped (that is, +signals 3, 4, 5, 6, 8, or 11). + +The command should run the daemon in the foreground. For Ceph daemons, +that means the ``-f`` option. + + +Options +======= + +None + + +Availability +============ + +**ceph-run** is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer to +the Ceph documentation at http://ceph.com/docs for more information. + + +See also +======== + +:doc:`ceph <ceph>`\(8), +:doc:`ceph-mon <ceph-mon>`\(8), +:doc:`ceph-mds <ceph-mds>`\(8), +:doc:`ceph-osd <ceph-osd>`\(8) diff --git a/doc/man/8/ceph-syn.rst b/doc/man/8/ceph-syn.rst new file mode 100644 index 00000000..a30c460c --- /dev/null +++ b/doc/man/8/ceph-syn.rst @@ -0,0 +1,99 @@ +:orphan: + +=============================================== + ceph-syn -- ceph synthetic workload generator +=============================================== + +.. program:: ceph-syn + +Synopsis +======== + +| **ceph-syn** [ -m *monaddr*:*port* ] --syn *command* *...* + + +Description +=========== + +**ceph-syn** is a simple synthetic workload generator for the Ceph +distributed file system. It uses the userspace client library to +generate simple workloads against a currently running file system. The +file system need not be mounted via ceph-fuse(8) or the kernel client. + +One or more ``--syn`` command arguments specify the particular +workload, as documented below. + + +Options +======= + +.. option:: -d + + Detach from console and daemonize after startup. + +.. option:: -c ceph.conf, --conf=ceph.conf + + Use *ceph.conf* configuration file instead of the default + ``/etc/ceph/ceph.conf`` to determine monitor addresses during + startup. + +.. option:: -m monaddress[:port] + + Connect to specified monitor (instead of looking through + ``ceph.conf``). + +.. option:: --num_client num + + Run num different clients, each in a separate thread. + +.. option:: --syn workloadspec + + Run the given workload. May be specified as many times as + needed. Workloads will normally run sequentially. + + +Workloads +========= + +Each workload should be preceded by ``--syn`` on the command +line. This is not a complete list. + +:command:`mknap` *path* *snapname* + Create a snapshot called *snapname* on *path*. + +:command:`rmsnap` *path* *snapname* + Delete snapshot called *snapname* on *path*. + +:command:`rmfile` *path* + Delete/unlink *path*. + +:command:`writefile` *sizeinmb* *blocksize* + Create a file, named after our client id, that is *sizeinmb* MB by + writing *blocksize* chunks. + +:command:`readfile` *sizeinmb* *blocksize* + Read file, named after our client id, that is *sizeinmb* MB by + writing *blocksize* chunks. + +:command:`rw` *sizeinmb* *blocksize* + Write file, then read it back, as above. + +:command:`makedirs` *numsubdirs* *numfiles* *depth* + Create a hierarchy of directories that is *depth* levels deep. Give + each directory *numsubdirs* subdirectories and *numfiles* files. + +:command:`walk` + Recursively walk the file system (like find). + + +Availability +============ + +**ceph-syn** is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer to +the Ceph documentation at http://ceph.com/docs for more information. + +See also +======== + +:doc:`ceph <ceph>`\(8), +:doc:`ceph-fuse <ceph-fuse>`\(8) diff --git a/doc/man/8/ceph-volume-systemd.rst b/doc/man/8/ceph-volume-systemd.rst new file mode 100644 index 00000000..b8578796 --- /dev/null +++ b/doc/man/8/ceph-volume-systemd.rst @@ -0,0 +1,55 @@ +:orphan: + +======================================================= + ceph-volume-systemd -- systemd ceph-volume helper tool +======================================================= + +.. program:: ceph-volume-systemd + +Synopsis +======== + +| **ceph-volume-systemd** *systemd instance name* + + +Description +=========== +:program:`ceph-volume-systemd` is a systemd helper tool that receives input +from (dynamically created) systemd units so that activation of OSDs can +proceed. + +It translates the input into a system call to ceph-volume for activation +purposes only. + + +Examples +======== +Its input is the ``systemd instance name`` (represented by ``%i`` in a systemd +unit), and it should be in the following format:: + + <ceph-volume subcommand>-<extra metadata> + +In the case of ``lvm`` a call could look like:: + + /usr/bin/ceph-volume-systemd lvm-0-8715BEB4-15C5-49DE-BA6F-401086EC7B41 + +Which in turn will call ``ceph-volume`` in the following way:: + + ceph-volume lvm trigger 0-8715BEB4-15C5-49DE-BA6F-401086EC7B41 + +Any other subcommand will need to have implemented a ``trigger`` command that +can consume the extra metadata in this format. + + +Availability +============ + +:program:`ceph-volume-systemd` is part of Ceph, a massively scalable, +open-source, distributed storage system. Please refer to the documentation at +http://docs.ceph.com/ for more information. + + +See also +======== + +:doc:`ceph-osd <ceph-osd>`\(8), diff --git a/doc/man/8/ceph-volume.rst b/doc/man/8/ceph-volume.rst new file mode 100644 index 00000000..724657a9 --- /dev/null +++ b/doc/man/8/ceph-volume.rst @@ -0,0 +1,337 @@ +:orphan: + +======================================================= + ceph-volume -- Ceph OSD deployment and inspection tool +======================================================= + +.. program:: ceph-volume + +Synopsis +======== + +| **ceph-volume** [-h] [--cluster CLUSTER] [--log-level LOG_LEVEL] +| [--log-path LOG_PATH] + +| **ceph-volume** **inventory** + +| **ceph-volume** **lvm** [ *trigger* | *create* | *activate* | *prepare* +| *zap* | *list* | *batch*] + +| **ceph-volume** **simple** [ *trigger* | *scan* | *activate* ] + + +Description +=========== + +:program:`ceph-volume` is a single purpose command line tool to deploy logical +volumes as OSDs, trying to maintain a similar API to ``ceph-disk`` when +preparing, activating, and creating OSDs. + +It deviates from ``ceph-disk`` by not interacting or relying on the udev rules +that come installed for Ceph. These rules allow automatic detection of +previously setup devices that are in turn fed into ``ceph-disk`` to activate +them. + + +Commands +======== + +inventory +--------- + +This subcommand provides information about a host's physical disc inventory and +reports metadata about these discs. Among this metadata one can find disc +specific data items (like model, size, rotational or solid state) as well as +data items specific to ceph using a device, such as if it is available for +use with ceph or if logical volumes are present. + +Examples:: + + ceph-volume inventory + ceph-volume inventory /dev/sda + ceph-volume inventory --format json-pretty + +Optional arguments: + +* [-h, --help] show the help message and exit +* [--format] report format, valid values are ``plain`` (default), + ``json`` and ``json-pretty`` + +lvm +--- + +By making use of LVM tags, the ``lvm`` sub-command is able to store and later +re-discover and query devices associated with OSDs so that they can later +activated. + +Subcommands: + +**batch** +Creates OSDs from a list of devices using a ``filestore`` +or ``bluestore`` (default) setup. It will create all necessary volume groups +and logical volumes required to have a working OSD. + +Example usage with three devices:: + + ceph-volume lvm batch --bluestore /dev/sda /dev/sdb /dev/sdc + +Optional arguments: + +* [-h, --help] show the help message and exit +* [--bluestore] Use the bluestore objectstore (default) +* [--filestore] Use the filestore objectstore +* [--yes] Skip the report and prompt to continue provisioning +* [--prepare] Only prepare OSDs, do not activate +* [--dmcrypt] Enable encryption for the underlying OSD devices +* [--crush-device-class] Define a CRUSH device class to assign the OSD to +* [--no-systemd] Do not enable or create any systemd units +* [--report] Report what the potential outcome would be for the + current input (requires devices to be passed in) +* [--format] Output format when reporting (used along with + --report), can be one of 'pretty' (default) or 'json' +* [--block-db-size] Set (or override) the "bluestore_block_db_size" value, + in bytes +* [--journal-size] Override the "osd_journal_size" value, in megabytes + +Required positional arguments: + +* <DEVICE> Full path to a raw device, like ``/dev/sda``. Multiple + ``<DEVICE>`` paths can be passed in. + + +**activate** +Enables a systemd unit that persists the OSD ID and its UUID (also called +``fsid`` in Ceph CLI tools), so that at boot time it can understand what OSD is +enabled and needs to be mounted. + +Usage:: + + ceph-volume lvm activate --bluestore <osd id> <osd fsid> + +Optional Arguments: + +* [-h, --help] show the help message and exit +* [--auto-detect-objectstore] Automatically detect the objectstore by inspecting + the OSD +* [--bluestore] bluestore objectstore (default) +* [--filestore] filestore objectstore +* [--all] Activate all OSDs found in the system +* [--no-systemd] Skip creating and enabling systemd units and starting of OSD + services + +Multiple OSDs can be activated at once by using the (idempotent) ``--all`` flag:: + + ceph-volume lvm activate --all + + +**prepare** +Prepares a logical volume to be used as an OSD and journal using a ``filestore`` +or ``bluestore`` (default) setup. It will not create or modify the logical volumes +except for adding extra metadata. + +Usage:: + + ceph-volume lvm prepare --filestore --data <data lv> --journal <journal device> + +Optional arguments: + +* [-h, --help] show the help message and exit +* [--journal JOURNAL] A logical group name, path to a logical volume, or path to a device +* [--bluestore] Use the bluestore objectstore (default) +* [--block.wal] Path to a bluestore block.wal logical volume or partition +* [--block.db] Path to a bluestore block.db logical volume or partition +* [--filestore] Use the filestore objectstore +* [--dmcrypt] Enable encryption for the underlying OSD devices +* [--osd-id OSD_ID] Reuse an existing OSD id +* [--osd-fsid OSD_FSID] Reuse an existing OSD fsid +* [--crush-device-class] Define a CRUSH device class to assign the OSD to + +Required arguments: + +* --data A logical group name or a path to a logical volume + +For encrypting an OSD, the ``--dmcrypt`` flag must be added when preparing +(also supported in the ``create`` sub-command). + + +**create** +Wraps the two-step process to provision a new osd (calling ``prepare`` first +and then ``activate``) into a single one. The reason to prefer ``prepare`` and +then ``activate`` is to gradually introduce new OSDs into a cluster, and +avoiding large amounts of data being rebalanced. + +The single-call process unifies exactly what ``prepare`` and ``activate`` do, +with the convenience of doing it all at once. Flags and general usage are +equivalent to those of the ``prepare`` and ``activate`` subcommand. + +**trigger** +This subcommand is not meant to be used directly, and it is used by systemd so +that it proxies input to ``ceph-volume lvm activate`` by parsing the +input from systemd, detecting the UUID and ID associated with an OSD. + +Usage:: + + ceph-volume lvm trigger <SYSTEMD-DATA> + +The systemd "data" is expected to be in the format of:: + + <OSD ID>-<OSD UUID> + +The lvs associated with the OSD need to have been prepared previously, +so that all needed tags and metadata exist. + +Positional arguments: + +* <SYSTEMD_DATA> Data from a systemd unit containing ID and UUID of the OSD. + +**list** +List devices or logical volumes associated with Ceph. An association is +determined if a device has information relating to an OSD. This is +verified by querying LVM's metadata and correlating it with devices. + +The lvs associated with the OSD need to have been prepared previously by +ceph-volume so that all needed tags and metadata exist. + +Usage:: + + ceph-volume lvm list + +List a particular device, reporting all metadata about it:: + + ceph-volume lvm list /dev/sda1 + +List a logical volume, along with all its metadata (vg is a volume +group, and lv the logical volume name):: + + ceph-volume lvm list {vg/lv} + +Positional arguments: + +* <DEVICE> Either in the form of ``vg/lv`` for logical volumes, + ``/path/to/sda1`` or ``/path/to/sda`` for regular devices. + + +**zap** +Zaps the given logical volume or partition. If given a path to a logical +volume it must be in the format of vg/lv. Any filesystems present +on the given lv or partition will be removed and all data will be purged. + +However, the lv or partition will be kept intact. + +Usage, for logical volumes:: + + ceph-volume lvm zap {vg/lv} + +Usage, for logical partitions:: + + ceph-volume lvm zap /dev/sdc1 + +For full removal of the device use the ``--destroy`` flag (allowed for all +device types):: + + ceph-volume lvm zap --destroy /dev/sdc1 + +Multiple devices can be removed by specifying the OSD ID and/or the OSD FSID:: + + ceph-volume lvm zap --destroy --osd-id 1 + ceph-volume lvm zap --destroy --osd-id 1 --osd-fsid C9605912-8395-4D76-AFC0-7DFDAC315D59 + + +Positional arguments: + +* <DEVICE> Either in the form of ``vg/lv`` for logical volumes, + ``/path/to/sda1`` or ``/path/to/sda`` for regular devices. + + +simple +------ + +Scan legacy OSD directories or data devices that may have been created by +ceph-disk, or manually. + +Subcommands: + +**activate** +Enables a systemd unit that persists the OSD ID and its UUID (also called +``fsid`` in Ceph CLI tools), so that at boot time it can understand what OSD is +enabled and needs to be mounted, while reading information that was previously +created and persisted at ``/etc/ceph/osd/`` in JSON format. + +Usage:: + + ceph-volume simple activate --bluestore <osd id> <osd fsid> + +Optional Arguments: + +* [-h, --help] show the help message and exit +* [--bluestore] bluestore objectstore (default) +* [--filestore] filestore objectstore + +Note: It requires a matching JSON file with the following format:: + + /etc/ceph/osd/<osd id>-<osd fsid>.json + + +**scan** +Scan a running OSD or data device for an OSD for metadata that can later be +used to activate and manage the OSD with ceph-volume. The scan method will +create a JSON file with the required information plus anything found in the OSD +directory as well. + +Optionally, the JSON blob can be sent to stdout for further inspection. + +Usage on all running OSDs:: + + ceph-voume simple scan + +Usage on data devices:: + + ceph-volume simple scan <data device> + +Running OSD directories:: + + ceph-volume simple scan <path to osd dir> + + +Optional arguments: + +* [-h, --help] show the help message and exit +* [--stdout] Send the JSON blob to stdout +* [--force] If the JSON file exists at destination, overwrite it + +Optional Positional arguments: + +* <DATA DEVICE or OSD DIR> Actual data partition or a path to the running OSD + +**trigger** +This subcommand is not meant to be used directly, and it is used by systemd so +that it proxies input to ``ceph-volume simple activate`` by parsing the +input from systemd, detecting the UUID and ID associated with an OSD. + +Usage:: + + ceph-volume simple trigger <SYSTEMD-DATA> + +The systemd "data" is expected to be in the format of:: + + <OSD ID>-<OSD UUID> + +The JSON file associated with the OSD need to have been persisted previously by +a scan (or manually), so that all needed metadata can be used. + +Positional arguments: + +* <SYSTEMD_DATA> Data from a systemd unit containing ID and UUID of the OSD. + + +Availability +============ + +:program:`ceph-volume` is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer to +the documentation at http://docs.ceph.com/ for more information. + + +See also +======== + +:doc:`ceph-osd <ceph-osd>`\(8), diff --git a/doc/man/8/ceph.rst b/doc/man/8/ceph.rst new file mode 100644 index 00000000..847abb7a --- /dev/null +++ b/doc/man/8/ceph.rst @@ -0,0 +1,1574 @@ +:orphan: + +================================== + ceph -- ceph administration tool +================================== + +.. program:: ceph + +Synopsis +======== + +| **ceph** **auth** [ *add* \| *caps* \| *del* \| *export* \| *get* \| *get-key* \| *get-or-create* \| *get-or-create-key* \| *import* \| *list* \| *print-key* \| *print_key* ] ... + +| **ceph** **compact** + +| **ceph** **config-key** [ *rm* | *exists* | *get* | *ls* | *dump* | *set* ] ... + +| **ceph** **daemon** *<name>* \| *<path>* *<command>* ... + +| **ceph** **daemonperf** *<name>* \| *<path>* [ *interval* [ *count* ] ] + +| **ceph** **df** *{detail}* + +| **ceph** **fs** [ *ls* \| *new* \| *reset* \| *rm* ] ... + +| **ceph** **fsid** + +| **ceph** **health** *{detail}* + +| **ceph** **heap** [ *dump* \| *start_profiler* \| *stop_profiler* \| *release* \| *get_release_rate* \| *set_release_rate* \| *stats* ] ... + +| **ceph** **injectargs** *<injectedargs>* [ *<injectedargs>*... ] + +| **ceph** **log** *<logtext>* [ *<logtext>*... ] + +| **ceph** **mds** [ *compat* \| *fail* \| *rm* \| *rmfailed* \| *set_state* \| *stat* \| *repaired* ] ... + +| **ceph** **mon** [ *add* \| *dump* \| *getmap* \| *remove* \| *stat* ] ... + +| **ceph** **mon_status** + +| **ceph** **osd** [ *blacklist* \| *blocked-by* \| *create* \| *new* \| *deep-scrub* \| *df* \| *down* \| *dump* \| *erasure-code-profile* \| *find* \| *getcrushmap* \| *getmap* \| *getmaxosd* \| *in* \| *ls* \| *lspools* \| *map* \| *metadata* \| *ok-to-stop* \| *out* \| *pause* \| *perf* \| *pg-temp* \| *force-create-pg* \| *primary-affinity* \| *primary-temp* \| *repair* \| *reweight* \| *reweight-by-pg* \| *rm* \| *destroy* \| *purge* \| *safe-to-destroy* \| *scrub* \| *set* \| *setcrushmap* \| *setmaxosd* \| *stat* \| *tree* \| *unpause* \| *unset* ] ... + +| **ceph** **osd** **crush** [ *add* \| *add-bucket* \| *create-or-move* \| *dump* \| *get-tunable* \| *link* \| *move* \| *remove* \| *rename-bucket* \| *reweight* \| *reweight-all* \| *reweight-subtree* \| *rm* \| *rule* \| *set* \| *set-tunable* \| *show-tunables* \| *tunables* \| *unlink* ] ... + +| **ceph** **osd** **pool** [ *create* \| *delete* \| *get* \| *get-quota* \| *ls* \| *mksnap* \| *rename* \| *rmsnap* \| *set* \| *set-quota* \| *stats* ] ... + +| **ceph** **osd** **pool** **application** [ *disable* \| *enable* \| *get* \| *rm* \| *set* ] ... + +| **ceph** **osd** **tier** [ *add* \| *add-cache* \| *cache-mode* \| *remove* \| *remove-overlay* \| *set-overlay* ] ... + +| **ceph** **pg** [ *debug* \| *deep-scrub* \| *dump* \| *dump_json* \| *dump_pools_json* \| *dump_stuck* \| *getmap* \| *ls* \| *ls-by-osd* \| *ls-by-pool* \| *ls-by-primary* \| *map* \| *repair* \| *scrub* \| *stat* ] ... + +| **ceph** **quorum** [ *enter* \| *exit* ] + +| **ceph** **quorum_status** + +| **ceph** **report** { *<tags>* [ *<tags>...* ] } + +| **ceph** **scrub** + +| **ceph** **status** + +| **ceph** **sync** **force** {--yes-i-really-mean-it} {--i-know-what-i-am-doing} + +| **ceph** **tell** *<name (type.id)> <command> [options...]* + +| **ceph** **version** + +Description +=========== + +:program:`ceph` is a control utility which is used for manual deployment and maintenance +of a Ceph cluster. It provides a diverse set of commands that allows deployment of +monitors, OSDs, placement groups, MDS and overall maintenance, administration +of the cluster. + +Commands +======== + +auth +---- + +Manage authentication keys. It is used for adding, removing, exporting +or updating of authentication keys for a particular entity such as a monitor or +OSD. It uses some additional subcommands. + +Subcommand ``add`` adds authentication info for a particular entity from input +file, or random key if no input is given and/or any caps specified in the command. + +Usage:: + + ceph auth add <entity> {<caps> [<caps>...]} + +Subcommand ``caps`` updates caps for **name** from caps specified in the command. + +Usage:: + + ceph auth caps <entity> <caps> [<caps>...] + +Subcommand ``del`` deletes all caps for ``name``. + +Usage:: + + ceph auth del <entity> + +Subcommand ``export`` writes keyring for requested entity, or master keyring if +none given. + +Usage:: + + ceph auth export {<entity>} + +Subcommand ``get`` writes keyring file with requested key. + +Usage:: + + ceph auth get <entity> + +Subcommand ``get-key`` displays requested key. + +Usage:: + + ceph auth get-key <entity> + +Subcommand ``get-or-create`` adds authentication info for a particular entity +from input file, or random key if no input given and/or any caps specified in the +command. + +Usage:: + + ceph auth get-or-create <entity> {<caps> [<caps>...]} + +Subcommand ``get-or-create-key`` gets or adds key for ``name`` from system/caps +pairs specified in the command. If key already exists, any given caps must match +the existing caps for that key. + +Usage:: + + ceph auth get-or-create-key <entity> {<caps> [<caps>...]} + +Subcommand ``import`` reads keyring from input file. + +Usage:: + + ceph auth import + +Subcommand ``ls`` lists authentication state. + +Usage:: + + ceph auth ls + +Subcommand ``print-key`` displays requested key. + +Usage:: + + ceph auth print-key <entity> + +Subcommand ``print_key`` displays requested key. + +Usage:: + + ceph auth print_key <entity> + + +compact +------- + +Causes compaction of monitor's leveldb storage. + +Usage:: + + ceph compact + + +config-key +---------- + +Manage configuration key. It uses some additional subcommands. + +Subcommand ``rm`` deletes configuration key. + +Usage:: + + ceph config-key rm <key> + +Subcommand ``exists`` checks for configuration keys existence. + +Usage:: + + ceph config-key exists <key> + +Subcommand ``get`` gets the configuration key. + +Usage:: + + ceph config-key get <key> + +Subcommand ``ls`` lists configuration keys. + +Usage:: + + ceph config-key ls + +Subcommand ``dump`` dumps configuration keys and values. + +Usage:: + + ceph config-key dump + +Subcommand ``set`` puts configuration key and value. + +Usage:: + + ceph config-key set <key> {<val>} + + +daemon +------ + +Submit admin-socket commands. + +Usage:: + + ceph daemon {daemon_name|socket_path} {command} ... + +Example:: + + ceph daemon osd.0 help + + +daemonperf +---------- + +Watch performance counters from a Ceph daemon. + +Usage:: + + ceph daemonperf {daemon_name|socket_path} [{interval} [{count}]] + + +df +-- + +Show cluster's free space status. + +Usage:: + + ceph df {detail} + +.. _ceph features: + +features +-------- + +Show the releases and features of all connected daemons and clients connected +to the cluster, along with the numbers of them in each bucket grouped by the +corresponding features/releases. Each release of Ceph supports a different set +of features, expressed by the features bitmask. New cluster features require +that clients support the feature, or else they are not allowed to connect to +these new features. As new features or capabilities are enabled after an +upgrade, older clients are prevented from connecting. + +Usage:: + + ceph features + +fs +-- + +Manage cephfs filesystems. It uses some additional subcommands. + +Subcommand ``ls`` to list filesystems + +Usage:: + + ceph fs ls + +Subcommand ``new`` to make a new filesystem using named pools <metadata> and <data> + +Usage:: + + ceph fs new <fs_name> <metadata> <data> + +Subcommand ``reset`` is used for disaster recovery only: reset to a single-MDS map + +Usage:: + + ceph fs reset <fs_name> {--yes-i-really-mean-it} + +Subcommand ``rm`` to disable the named filesystem + +Usage:: + + ceph fs rm <fs_name> {--yes-i-really-mean-it} + + +fsid +---- + +Show cluster's FSID/UUID. + +Usage:: + + ceph fsid + + +health +------ + +Show cluster's health. + +Usage:: + + ceph health {detail} + + +heap +---- + +Show heap usage info (available only if compiled with tcmalloc) + +Usage:: + + ceph heap dump|start_profiler|stop_profiler|stats + +Subcommand ``release`` to make TCMalloc to releases no-longer-used memory back to the kernel at once. + +Usage:: + + ceph heap release + +Subcommand ``(get|set)_release_rate`` get or set the TCMalloc memory release rate. TCMalloc releases +no-longer-used memory back to the kernel gradually. the rate controls how quickly this happens. +Increase this setting to make TCMalloc to return unused memory more frequently. 0 means never return +memory to system, 1 means wait for 1000 pages after releasing a page to system. It is ``1.0`` by default.. + +Usage:: + + ceph heap get_release_rate|set_release_rate {<val>} + +injectargs +---------- + +Inject configuration arguments into monitor. + +Usage:: + + ceph injectargs <injected_args> [<injected_args>...] + + +log +--- + +Log supplied text to the monitor log. + +Usage:: + + ceph log <logtext> [<logtext>...] + + +mds +--- + +Manage metadata server configuration and administration. It uses some +additional subcommands. + +Subcommand ``compat`` manages compatible features. It uses some additional +subcommands. + +Subcommand ``rm_compat`` removes compatible feature. + +Usage:: + + ceph mds compat rm_compat <int[0-]> + +Subcommand ``rm_incompat`` removes incompatible feature. + +Usage:: + + ceph mds compat rm_incompat <int[0-]> + +Subcommand ``show`` shows mds compatibility settings. + +Usage:: + + ceph mds compat show + +Subcommand ``fail`` forces mds to status fail. + +Usage:: + + ceph mds fail <role|gid> + +Subcommand ``rm`` removes inactive mds. + +Usage:: + + ceph mds rm <int[0-]> <name> (type.id)> + +Subcommand ``rmfailed`` removes failed mds. + +Usage:: + + ceph mds rmfailed <int[0-]> + +Subcommand ``set_state`` sets mds state of <gid> to <numeric-state>. + +Usage:: + + ceph mds set_state <int[0-]> <int[0-20]> + +Subcommand ``stat`` shows MDS status. + +Usage:: + + ceph mds stat + +Subcommand ``repaired`` mark a damaged MDS rank as no longer damaged. + +Usage:: + + ceph mds repaired <role> + +mon +--- + +Manage monitor configuration and administration. It uses some additional +subcommands. + +Subcommand ``add`` adds new monitor named <name> at <addr>. + +Usage:: + + ceph mon add <name> <IPaddr[:port]> + +Subcommand ``dump`` dumps formatted monmap (optionally from epoch) + +Usage:: + + ceph mon dump {<int[0-]>} + +Subcommand ``getmap`` gets monmap. + +Usage:: + + ceph mon getmap {<int[0-]>} + +Subcommand ``remove`` removes monitor named <name>. + +Usage:: + + ceph mon remove <name> + +Subcommand ``stat`` summarizes monitor status. + +Usage:: + + ceph mon stat + +mon_status +---------- + +Reports status of monitors. + +Usage:: + + ceph mon_status + +mgr +--- + +Ceph manager daemon configuration and management. + +Subcommand ``dump`` dumps the latest MgrMap, which describes the active +and standby manager daemons. + +Usage:: + + ceph mgr dump + +Subcommand ``fail`` will mark a manager daemon as failed, removing it +from the manager map. If it is the active manager daemon a standby +will take its place. + +Usage:: + + ceph mgr fail <name> + +Subcommand ``module ls`` will list currently enabled manager modules (plugins). + +Usage:: + + ceph mgr module ls + +Subcommand ``module enable`` will enable a manager module. Available modules are included in MgrMap and visible via ``mgr dump``. + +Usage:: + + ceph mgr module enable <module> + +Subcommand ``module disable`` will disable an active manager module. + +Usage:: + + ceph mgr module disable <module> + +Subcommand ``metadata`` will report metadata about all manager daemons or, if the name is specified, a single manager daemon. + +Usage:: + + ceph mgr metadata [name] + +Subcommand ``versions`` will report a count of running daemon versions. + +Usage:: + + ceph mgr versions + +Subcommand ``count-metadata`` will report a count of any daemon metadata field. + +Usage:: + + ceph mgr count-metadata <field> + +.. _ceph-admin-osd: + +osd +--- + +Manage OSD configuration and administration. It uses some additional +subcommands. + +Subcommand ``blacklist`` manage blacklisted clients. It uses some additional +subcommands. + +Subcommand ``add`` add <addr> to blacklist (optionally until <expire> seconds +from now) + +Usage:: + + ceph osd blacklist add <EntityAddr> {<float[0.0-]>} + +Subcommand ``ls`` show blacklisted clients + +Usage:: + + ceph osd blacklist ls + +Subcommand ``rm`` remove <addr> from blacklist + +Usage:: + + ceph osd blacklist rm <EntityAddr> + +Subcommand ``blocked-by`` prints a histogram of which OSDs are blocking their peers + +Usage:: + + ceph osd blocked-by + +Subcommand ``create`` creates new osd (with optional UUID and ID). + +This command is DEPRECATED as of the Luminous release, and will be removed in +a future release. + +Subcommand ``new`` should instead be used. + +Usage:: + + ceph osd create {<uuid>} {<id>} + +Subcommand ``new`` can be used to create a new OSD or to recreate a previously +destroyed OSD with a specific *id*. The new OSD will have the specified *uuid*, +and the command expects a JSON file containing the base64 cephx key for auth +entity *client.osd.<id>*, as well as optional base64 cepx key for dm-crypt +lockbox access and a dm-crypt key. Specifying a dm-crypt requires specifying +the accompanying lockbox cephx key. + +Usage:: + + ceph osd new {<uuid>} {<id>} -i {<params.json>} + +The parameters JSON file is optional but if provided, is expected to maintain +a form of the following format:: + + { + "cephx_secret": "AQBWtwhZdBO5ExAAIDyjK2Bh16ZXylmzgYYEjg==", + "crush_device_class": "myclass" + } + +Or:: + + { + "cephx_secret": "AQBWtwhZdBO5ExAAIDyjK2Bh16ZXylmzgYYEjg==", + "cephx_lockbox_secret": "AQDNCglZuaeVCRAAYr76PzR1Anh7A0jswkODIQ==", + "dmcrypt_key": "<dm-crypt key>", + "crush_device_class": "myclass" + } + +Or:: + + { + "crush_device_class": "myclass" + } + +The "crush_device_class" property is optional. If specified, it will set the +initial CRUSH device class for the new OSD. + + +Subcommand ``crush`` is used for CRUSH management. It uses some additional +subcommands. + +Subcommand ``add`` adds or updates crushmap position and weight for <name> with +<weight> and location <args>. + +Usage:: + + ceph osd crush add <osdname (id|osd.id)> <float[0.0-]> <args> [<args>...] + +Subcommand ``add-bucket`` adds no-parent (probably root) crush bucket <name> of +type <type>. + +Usage:: + + ceph osd crush add-bucket <name> <type> + +Subcommand ``create-or-move`` creates entry or moves existing entry for <name> +<weight> at/to location <args>. + +Usage:: + + ceph osd crush create-or-move <osdname (id|osd.id)> <float[0.0-]> <args> + [<args>...] + +Subcommand ``dump`` dumps crush map. + +Usage:: + + ceph osd crush dump + +Subcommand ``get-tunable`` get crush tunable straw_calc_version + +Usage:: + + ceph osd crush get-tunable straw_calc_version + +Subcommand ``link`` links existing entry for <name> under location <args>. + +Usage:: + + ceph osd crush link <name> <args> [<args>...] + +Subcommand ``move`` moves existing entry for <name> to location <args>. + +Usage:: + + ceph osd crush move <name> <args> [<args>...] + +Subcommand ``remove`` removes <name> from crush map (everywhere, or just at +<ancestor>). + +Usage:: + + ceph osd crush remove <name> {<ancestor>} + +Subcommand ``rename-bucket`` renames bucket <srcname> to <dstname> + +Usage:: + + ceph osd crush rename-bucket <srcname> <dstname> + +Subcommand ``reweight`` change <name>'s weight to <weight> in crush map. + +Usage:: + + ceph osd crush reweight <name> <float[0.0-]> + +Subcommand ``reweight-all`` recalculate the weights for the tree to +ensure they sum correctly + +Usage:: + + ceph osd crush reweight-all + +Subcommand ``reweight-subtree`` changes all leaf items beneath <name> +to <weight> in crush map + +Usage:: + + ceph osd crush reweight-subtree <name> <weight> + +Subcommand ``rm`` removes <name> from crush map (everywhere, or just at +<ancestor>). + +Usage:: + + ceph osd crush rm <name> {<ancestor>} + +Subcommand ``rule`` is used for creating crush rules. It uses some additional +subcommands. + +Subcommand ``create-erasure`` creates crush rule <name> for erasure coded pool +created with <profile> (default default). + +Usage:: + + ceph osd crush rule create-erasure <name> {<profile>} + +Subcommand ``create-simple`` creates crush rule <name> to start from <root>, +replicate across buckets of type <type>, using a choose mode of <firstn|indep> +(default firstn; indep best for erasure pools). + +Usage:: + + ceph osd crush rule create-simple <name> <root> <type> {firstn|indep} + +Subcommand ``dump`` dumps crush rule <name> (default all). + +Usage:: + + ceph osd crush rule dump {<name>} + +Subcommand ``ls`` lists crush rules. + +Usage:: + + ceph osd crush rule ls + +Subcommand ``rm`` removes crush rule <name>. + +Usage:: + + ceph osd crush rule rm <name> + +Subcommand ``set`` used alone, sets crush map from input file. + +Usage:: + + ceph osd crush set + +Subcommand ``set`` with osdname/osd.id update crushmap position and weight +for <name> to <weight> with location <args>. + +Usage:: + + ceph osd crush set <osdname (id|osd.id)> <float[0.0-]> <args> [<args>...] + +Subcommand ``set-tunable`` set crush tunable <tunable> to <value>. The only +tunable that can be set is straw_calc_version. + +Usage:: + + ceph osd crush set-tunable straw_calc_version <value> + +Subcommand ``show-tunables`` shows current crush tunables. + +Usage:: + + ceph osd crush show-tunables + +Subcommand ``tree`` shows the crush buckets and items in a tree view. + +Usage:: + + ceph osd crush tree + +Subcommand ``tunables`` sets crush tunables values to <profile>. + +Usage:: + + ceph osd crush tunables legacy|argonaut|bobtail|firefly|hammer|optimal|default + +Subcommand ``unlink`` unlinks <name> from crush map (everywhere, or just at +<ancestor>). + +Usage:: + + ceph osd crush unlink <name> {<ancestor>} + +Subcommand ``df`` shows OSD utilization + +Usage:: + + ceph osd df {plain|tree} + +Subcommand ``deep-scrub`` initiates deep scrub on specified osd. + +Usage:: + + ceph osd deep-scrub <who> + +Subcommand ``down`` sets osd(s) <id> [<id>...] down. + +Usage:: + + ceph osd down <ids> [<ids>...] + +Subcommand ``dump`` prints summary of OSD map. + +Usage:: + + ceph osd dump {<int[0-]>} + +Subcommand ``erasure-code-profile`` is used for managing the erasure code +profiles. It uses some additional subcommands. + +Subcommand ``get`` gets erasure code profile <name>. + +Usage:: + + ceph osd erasure-code-profile get <name> + +Subcommand ``ls`` lists all erasure code profiles. + +Usage:: + + ceph osd erasure-code-profile ls + +Subcommand ``rm`` removes erasure code profile <name>. + +Usage:: + + ceph osd erasure-code-profile rm <name> + +Subcommand ``set`` creates erasure code profile <name> with [<key[=value]> ...] +pairs. Add a --force at the end to override an existing profile (IT IS RISKY). + +Usage:: + + ceph osd erasure-code-profile set <name> {<profile> [<profile>...]} + +Subcommand ``find`` find osd <id> in the CRUSH map and shows its location. + +Usage:: + + ceph osd find <int[0-]> + +Subcommand ``getcrushmap`` gets CRUSH map. + +Usage:: + + ceph osd getcrushmap {<int[0-]>} + +Subcommand ``getmap`` gets OSD map. + +Usage:: + + ceph osd getmap {<int[0-]>} + +Subcommand ``getmaxosd`` shows largest OSD id. + +Usage:: + + ceph osd getmaxosd + +Subcommand ``in`` sets osd(s) <id> [<id>...] in. + +Usage:: + + ceph osd in <ids> [<ids>...] + +Subcommand ``lost`` marks osd as permanently lost. THIS DESTROYS DATA IF NO +MORE REPLICAS EXIST, BE CAREFUL. + +Usage:: + + ceph osd lost <int[0-]> {--yes-i-really-mean-it} + +Subcommand ``ls`` shows all OSD ids. + +Usage:: + + ceph osd ls {<int[0-]>} + +Subcommand ``lspools`` lists pools. + +Usage:: + + ceph osd lspools {<int>} + +Subcommand ``map`` finds pg for <object> in <pool>. + +Usage:: + + ceph osd map <poolname> <objectname> + +Subcommand ``metadata`` fetches metadata for osd <id>. + +Usage:: + + ceph osd metadata {int[0-]} (default all) + +Subcommand ``out`` sets osd(s) <id> [<id>...] out. + +Usage:: + + ceph osd out <ids> [<ids>...] + +Subcommand ``ok-to-stop`` checks whether the list of OSD(s) can be +stopped without immediately making data unavailable. That is, all +data should remain readable and writeable, although data redundancy +may be reduced as some PGs may end up in a degraded (but active) +state. It will return a success code if it is okay to stop the +OSD(s), or an error code and informative message if it is not or if no +conclusion can be drawn at the current time. + +Usage:: + + ceph osd ok-to-stop <id> [<ids>...] + +Subcommand ``pause`` pauses osd. + +Usage:: + + ceph osd pause + +Subcommand ``perf`` prints dump of OSD perf summary stats. + +Usage:: + + ceph osd perf + +Subcommand ``pg-temp`` set pg_temp mapping pgid:[<id> [<id>...]] (developers +only). + +Usage:: + + ceph osd pg-temp <pgid> {<id> [<id>...]} + +Subcommand ``force-create-pg`` forces creation of pg <pgid>. + +Usage:: + + ceph osd force-create-pg <pgid> + + +Subcommand ``pool`` is used for managing data pools. It uses some additional +subcommands. + +Subcommand ``create`` creates pool. + +Usage:: + + ceph osd pool create <poolname> <int[0-]> {<int[0-]>} {replicated|erasure} + {<erasure_code_profile>} {<rule>} {<int>} + +Subcommand ``delete`` deletes pool. + +Usage:: + + ceph osd pool delete <poolname> {<poolname>} {--yes-i-really-really-mean-it} + +Subcommand ``get`` gets pool parameter <var>. + +Usage:: + + ceph osd pool get <poolname> size|min_size|pg_num|pgp_num|crush_rule|write_fadvise_dontneed + +Only for tiered pools:: + + ceph osd pool get <poolname> hit_set_type|hit_set_period|hit_set_count|hit_set_fpp| + target_max_objects|target_max_bytes|cache_target_dirty_ratio|cache_target_dirty_high_ratio| + cache_target_full_ratio|cache_min_flush_age|cache_min_evict_age| + min_read_recency_for_promote|hit_set_grade_decay_rate|hit_set_search_last_n + +Only for erasure coded pools:: + + ceph osd pool get <poolname> erasure_code_profile + +Use ``all`` to get all pool parameters that apply to the pool's type:: + + ceph osd pool get <poolname> all + +Subcommand ``get-quota`` obtains object or byte limits for pool. + +Usage:: + + ceph osd pool get-quota <poolname> + +Subcommand ``ls`` list pools + +Usage:: + + ceph osd pool ls {detail} + +Subcommand ``mksnap`` makes snapshot <snap> in <pool>. + +Usage:: + + ceph osd pool mksnap <poolname> <snap> + +Subcommand ``rename`` renames <srcpool> to <destpool>. + +Usage:: + + ceph osd pool rename <poolname> <poolname> + +Subcommand ``rmsnap`` removes snapshot <snap> from <pool>. + +Usage:: + + ceph osd pool rmsnap <poolname> <snap> + +Subcommand ``set`` sets pool parameter <var> to <val>. + +Usage:: + + ceph osd pool set <poolname> size|min_size|pg_num| + pgp_num|crush_rule|hashpspool|nodelete|nopgchange|nosizechange| + hit_set_type|hit_set_period|hit_set_count|hit_set_fpp|debug_fake_ec_pool| + target_max_bytes|target_max_objects|cache_target_dirty_ratio| + cache_target_dirty_high_ratio| + cache_target_full_ratio|cache_min_flush_age|cache_min_evict_age| + min_read_recency_for_promote|write_fadvise_dontneed|hit_set_grade_decay_rate| + hit_set_search_last_n + <val> {--yes-i-really-mean-it} + +Subcommand ``set-quota`` sets object or byte limit on pool. + +Usage:: + + ceph osd pool set-quota <poolname> max_objects|max_bytes <val> + +Subcommand ``stats`` obtain stats from all pools, or from specified pool. + +Usage:: + + ceph osd pool stats {<name>} + +Subcommand ``application`` is used for adding an annotation to the given +pool. By default, the possible applications are object, block, and file +storage (corresponding app-names are "rgw", "rbd", and "cephfs"). However, +there might be other applications as well. Based on the application, there +may or may not be some processing conducted. + +Subcommand ``disable`` disables the given application on the given pool. + +Usage:: + + ceph osd pool application disable <pool-name> <app> {--yes-i-really-mean-it} + +Subcommand ``enable`` adds an annotation to the given pool for the mentioned +application. + +Usage:: + + ceph osd pool application enable <pool-name> <app> {--yes-i-really-mean-it} + +Subcommand ``get`` displays the value for the given key that is assosciated +with the given application of the given pool. Not passing the optional +arguments would display all key-value pairs for all applications for all +pools. + +Usage:: + + ceph osd pool application get {<pool-name>} {<app>} {<key>} + +Subcommand ``rm`` removes the key-value pair for the given key in the given +application of the given pool. + +Usage:: + + ceph osd pool application rm <pool-name> <app> <key> + +Subcommand ``set`` assosciates or updates, if it already exists, a key-value +pair with the given application for the given pool. + +Usage:: + + ceph osd pool application set <pool-name> <app> <key> <value> + +Subcommand ``primary-affinity`` adjust osd primary-affinity from 0.0 <=<weight> +<= 1.0 + +Usage:: + + ceph osd primary-affinity <osdname (id|osd.id)> <float[0.0-1.0]> + +Subcommand ``primary-temp`` sets primary_temp mapping pgid:<id>|-1 (developers +only). + +Usage:: + + ceph osd primary-temp <pgid> <id> + +Subcommand ``repair`` initiates repair on a specified osd. + +Usage:: + + ceph osd repair <who> + +Subcommand ``reweight`` reweights osd to 0.0 < <weight> < 1.0. + +Usage:: + + osd reweight <int[0-]> <float[0.0-1.0]> + +Subcommand ``reweight-by-pg`` reweight OSDs by PG distribution +[overload-percentage-for-consideration, default 120]. + +Usage:: + + ceph osd reweight-by-pg {<int[100-]>} {<poolname> [<poolname...]} + {--no-increasing} + +Subcommand ``reweight-by-utilization`` reweight OSDs by utilization +[overload-percentage-for-consideration, default 120]. + +Usage:: + + ceph osd reweight-by-utilization {<int[100-]>} + {--no-increasing} + +Subcommand ``rm`` removes osd(s) <id> [<id>...] from the OSD map. + + +Usage:: + + ceph osd rm <ids> [<ids>...] + +Subcommand ``destroy`` marks OSD *id* as *destroyed*, removing its cephx +entity's keys and all of its dm-crypt and daemon-private config key +entries. + +This command will not remove the OSD from crush, nor will it remove the +OSD from the OSD map. Instead, once the command successfully completes, +the OSD will show marked as *destroyed*. + +In order to mark an OSD as destroyed, the OSD must first be marked as +**lost**. + +Usage:: + + ceph osd destroy <id> {--yes-i-really-mean-it} + + +Subcommand ``purge`` performs a combination of ``osd destroy``, +``osd rm`` and ``osd crush remove``. + +Usage:: + + ceph osd purge <id> {--yes-i-really-mean-it} + +Subcommand ``safe-to-destroy`` checks whether it is safe to remove or +destroy an OSD without reducing overall data redundancy or durability. +It will return a success code if it is definitely safe, or an error +code and informative message if it is not or if no conclusion can be +drawn at the current time. + +Usage:: + + ceph osd safe-to-destroy <id> [<ids>...] + +Subcommand ``scrub`` initiates scrub on specified osd. + +Usage:: + + ceph osd scrub <who> + +Subcommand ``set`` sets <key>. + +Usage:: + + ceph osd set full|pause|noup|nodown|noout|noin|nobackfill| + norebalance|norecover|noscrub|nodeep-scrub|notieragent + +Subcommand ``setcrushmap`` sets crush map from input file. + +Usage:: + + ceph osd setcrushmap + +Subcommand ``setmaxosd`` sets new maximum osd value. + +Usage:: + + ceph osd setmaxosd <int[0-]> + +Subcommand ``set-require-min-compat-client`` enforces the cluster to be backward +compatible with the specified client version. This subcommand prevents you from +making any changes (e.g., crush tunables, or using new features) that +would violate the current setting. Please note, This subcommand will fail if +any connected daemon or client is not compatible with the features offered by +the given <version>. To see the features and releases of all clients connected +to cluster, please see `ceph features`_. + +Usage:: + + ceph osd set-require-min-compat-client <version> + +Subcommand ``stat`` prints summary of OSD map. + +Usage:: + + ceph osd stat + +Subcommand ``tier`` is used for managing tiers. It uses some additional +subcommands. + +Subcommand ``add`` adds the tier <tierpool> (the second one) to base pool <pool> +(the first one). + +Usage:: + + ceph osd tier add <poolname> <poolname> {--force-nonempty} + +Subcommand ``add-cache`` adds a cache <tierpool> (the second one) of size <size> +to existing pool <pool> (the first one). + +Usage:: + + ceph osd tier add-cache <poolname> <poolname> <int[0-]> + +Subcommand ``cache-mode`` specifies the caching mode for cache tier <pool>. + +Usage:: + + ceph osd tier cache-mode <poolname> none|writeback|forward|readonly| + readforward|readproxy + +Subcommand ``remove`` removes the tier <tierpool> (the second one) from base pool +<pool> (the first one). + +Usage:: + + ceph osd tier remove <poolname> <poolname> + +Subcommand ``remove-overlay`` removes the overlay pool for base pool <pool>. + +Usage:: + + ceph osd tier remove-overlay <poolname> + +Subcommand ``set-overlay`` set the overlay pool for base pool <pool> to be +<overlaypool>. + +Usage:: + + ceph osd tier set-overlay <poolname> <poolname> + +Subcommand ``tree`` prints OSD tree. + +Usage:: + + ceph osd tree {<int[0-]>} + +Subcommand ``unpause`` unpauses osd. + +Usage:: + + ceph osd unpause + +Subcommand ``unset`` unsets <key>. + +Usage:: + + ceph osd unset full|pause|noup|nodown|noout|noin|nobackfill| + norebalance|norecover|noscrub|nodeep-scrub|notieragent + + +pg +-- + +It is used for managing the placement groups in OSDs. It uses some +additional subcommands. + +Subcommand ``debug`` shows debug info about pgs. + +Usage:: + + ceph pg debug unfound_objects_exist|degraded_pgs_exist + +Subcommand ``deep-scrub`` starts deep-scrub on <pgid>. + +Usage:: + + ceph pg deep-scrub <pgid> + +Subcommand ``dump`` shows human-readable versions of pg map (only 'all' valid +with plain). + +Usage:: + + ceph pg dump {all|summary|sum|delta|pools|osds|pgs|pgs_brief} [{all|summary|sum|delta|pools|osds|pgs|pgs_brief...]} + +Subcommand ``dump_json`` shows human-readable version of pg map in json only. + +Usage:: + + ceph pg dump_json {all|summary|sum|delta|pools|osds|pgs|pgs_brief} [{all|summary|sum|delta|pools|osds|pgs|pgs_brief...]} + +Subcommand ``dump_pools_json`` shows pg pools info in json only. + +Usage:: + + ceph pg dump_pools_json + +Subcommand ``dump_stuck`` shows information about stuck pgs. + +Usage:: + + ceph pg dump_stuck {inactive|unclean|stale|undersized|degraded [inactive|unclean|stale|undersized|degraded...]} + {<int>} + +Subcommand ``getmap`` gets binary pg map to -o/stdout. + +Usage:: + + ceph pg getmap + +Subcommand ``ls`` lists pg with specific pool, osd, state + +Usage:: + + ceph pg ls {<int>} {<pg-state> [<pg-state>...]} + +Subcommand ``ls-by-osd`` lists pg on osd [osd] + +Usage:: + + ceph pg ls-by-osd <osdname (id|osd.id)> {<int>} + {<pg-state> [<pg-state>...]} + +Subcommand ``ls-by-pool`` lists pg with pool = [poolname] + +Usage:: + + ceph pg ls-by-pool <poolstr> {<int>} {<pg-state> [<pg-state>...]} + +Subcommand ``ls-by-primary`` lists pg with primary = [osd] + +Usage:: + + ceph pg ls-by-primary <osdname (id|osd.id)> {<int>} + {<pg-state> [<pg-state>...]} + +Subcommand ``map`` shows mapping of pg to osds. + +Usage:: + + ceph pg map <pgid> + +Subcommand ``repair`` starts repair on <pgid>. + +Usage:: + + ceph pg repair <pgid> + +Subcommand ``scrub`` starts scrub on <pgid>. + +Usage:: + + ceph pg scrub <pgid> + +Subcommand ``stat`` shows placement group status. + +Usage:: + + ceph pg stat + + +quorum +------ + +Cause MON to enter or exit quorum. + +Usage:: + + ceph quorum enter|exit + +Note: this only works on the MON to which the ``ceph`` command is connected. +If you want a specific MON to enter or exit quorum, use this syntax:: + + ceph tell mon.<id> quorum enter|exit + +quorum_status +------------- + +Reports status of monitor quorum. + +Usage:: + + ceph quorum_status + + +report +------ + +Reports full status of cluster, optional title tag strings. + +Usage:: + + ceph report {<tags> [<tags>...]} + + +scrub +----- + +Scrubs the monitor stores. + +Usage:: + + ceph scrub + + +status +------ + +Shows cluster status. + +Usage:: + + ceph status + + +sync force +---------- + +Forces sync of and clear monitor store. + +Usage:: + + ceph sync force {--yes-i-really-mean-it} {--i-know-what-i-am-doing} + + +tell +---- + +Sends a command to a specific daemon. + +Usage:: + + ceph tell <name (type.id)> <command> [options...] + + +List all available commands. + +Usage:: + + ceph tell <name (type.id)> help + +version +------- + +Show mon daemon version + +Usage:: + + ceph version + +Options +======= + +.. option:: -i infile + + will specify an input file to be passed along as a payload with the + command to the monitor cluster. This is only used for specific + monitor commands. + +.. option:: -o outfile + + will write any payload returned by the monitor cluster with its + reply to outfile. Only specific monitor commands (e.g. osd getmap) + return a payload. + +.. option:: --setuser user + + will apply the appropriate user ownership to the file specified by + the option '-o'. + +.. option:: --setgroup group + + will apply the appropriate group ownership to the file specified by + the option '-o'. + +.. option:: -c ceph.conf, --conf=ceph.conf + + Use ceph.conf configuration file instead of the default + ``/etc/ceph/ceph.conf`` to determine monitor addresses during startup. + +.. option:: --id CLIENT_ID, --user CLIENT_ID + + Client id for authentication. + +.. option:: --name CLIENT_NAME, -n CLIENT_NAME + + Client name for authentication. + +.. option:: --cluster CLUSTER + + Name of the Ceph cluster. + +.. option:: --admin-daemon ADMIN_SOCKET, daemon DAEMON_NAME + + Submit admin-socket commands via admin sockets in /var/run/ceph. + +.. option:: --admin-socket ADMIN_SOCKET_NOPE + + You probably mean --admin-daemon + +.. option:: -s, --status + + Show cluster status. + +.. option:: -w, --watch + + Watch live cluster changes. + +.. option:: --watch-debug + + Watch debug events. + +.. option:: --watch-info + + Watch info events. + +.. option:: --watch-sec + + Watch security events. + +.. option:: --watch-warn + + Watch warning events. + +.. option:: --watch-error + + Watch error events. + +.. option:: --version, -v + + Display version. + +.. option:: --verbose + + Make verbose. + +.. option:: --concise + + Make less verbose. + +.. option:: -f {json,json-pretty,xml,xml-pretty,plain}, --format + + Format of output. + +.. option:: --connect-timeout CLUSTER_TIMEOUT + + Set a timeout for connecting to the cluster. + +.. option:: --no-increasing + + ``--no-increasing`` is off by default. So increasing the osd weight is allowed + using the ``reweight-by-utilization`` or ``test-reweight-by-utilization`` commands. + If this option is used with these commands, it will help not to increase osd weight + even the osd is under utilized. + +.. option:: --block + + block until completion (scrub and deep-scrub only) + +Availability +============ + +:program:`ceph` is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer to +the Ceph documentation at http://ceph.com/docs for more information. + + +See also +======== + +:doc:`ceph-mon <ceph-mon>`\(8), +:doc:`ceph-osd <ceph-osd>`\(8), +:doc:`ceph-mds <ceph-mds>`\(8) diff --git a/doc/man/8/crushtool.rst b/doc/man/8/crushtool.rst new file mode 100644 index 00000000..ecd9db23 --- /dev/null +++ b/doc/man/8/crushtool.rst @@ -0,0 +1,292 @@ +:orphan: + +========================================== + crushtool -- CRUSH map manipulation tool +========================================== + +.. program:: crushtool + +Synopsis +======== + +| **crushtool** ( -d *map* | -c *map.txt* | --build --num_osds *numosds* + *layer1* *...* | --test ) [ -o *outfile* ] + + +Description +=========== + +**crushtool** is a utility that lets you create, compile, decompile +and test CRUSH map files. + +CRUSH is a pseudo-random data distribution algorithm that efficiently +maps input values (which, in the context of Ceph, correspond to Placement +Groups) across a heterogeneous, hierarchically structured device map. +The algorithm was originally described in detail in the following paper +(although it has evolved some since then):: + + http://www.ssrc.ucsc.edu/Papers/weil-sc06.pdf + +The tool has four modes of operation. + +.. option:: --compile|-c map.txt + + will compile a plaintext map.txt into a binary map file. + +.. option:: --decompile|-d map + + will take the compiled map and decompile it into a plaintext source + file, suitable for editing. + +.. option:: --build --num_osds {num-osds} layer1 ... + + will create map with the given layer structure. See below for a + detailed explanation. + +.. option:: --test + + will perform a dry run of a CRUSH mapping for a range of input + values ``[--min-x,--max-x]`` (default ``[0,1023]``) which can be + thought of as simulated Placement Groups. See below for a more + detailed explanation. + +Unlike other Ceph tools, **crushtool** does not accept generic options +such as **--debug-crush** from the command line. They can, however, be +provided via the CEPH_ARGS environment variable. For instance, to +silence all output from the CRUSH subsystem:: + + CEPH_ARGS="--debug-crush 0" crushtool ... + + +Running tests with --test +========================= + +The test mode will use the input crush map ( as specified with **-i +map** ) and perform a dry run of CRUSH mapping or random placement +(if **--simulate** is set ). On completion, two kinds of reports can be +created. +1) The **--show-...** option outputs human readable information +on stderr. +2) The **--output-csv** option creates CSV files that are +documented by the **--help-output** option. + +Note: Each Placement Group (PG) has an integer ID which can be obtained +from ``ceph pg dump`` (for example PG 2.2f means pool id 2, PG id 32). +The pool and PG IDs are combined by a function to get a value which is +given to CRUSH to map it to OSDs. crushtool does not know about PGs or +pools; it only runs simulations by mapping values in the range +``[--min-x,--max-x]``. + + +.. option:: --show-statistics + + Displays a summary of the distribution. For instance:: + + rule 1 (metadata) num_rep 5 result size == 5: 1024/1024 + + shows that rule **1** which is named **metadata** successfully + mapped **1024** values to **result size == 5** devices when trying + to map them to **num_rep 5** replicas. When it fails to provide the + required mapping, presumably because the number of **tries** must + be increased, a breakdown of the failures is displayed. For instance:: + + rule 1 (metadata) num_rep 10 result size == 8: 4/1024 + rule 1 (metadata) num_rep 10 result size == 9: 93/1024 + rule 1 (metadata) num_rep 10 result size == 10: 927/1024 + + shows that although **num_rep 10** replicas were required, **4** + out of **1024** values ( **4/1024** ) were mapped to **result size + == 8** devices only. + +.. option:: --show-mappings + + Displays the mapping of each value in the range ``[--min-x,--max-x]``. + For instance:: + + CRUSH rule 1 x 24 [11,6] + + shows that value **24** is mapped to devices **[11,6]** by rule + **1**. + +.. option:: --show-bad-mappings + + Displays which value failed to be mapped to the required number of + devices. For instance:: + + bad mapping rule 1 x 781 num_rep 7 result [8,10,2,11,6,9] + + shows that when rule **1** was required to map **7** devices, it + could map only six : **[8,10,2,11,6,9]**. + +.. option:: --show-utilization + + Displays the expected and actual utilization for each device, for + each number of replicas. For instance:: + + device 0: stored : 951 expected : 853.333 + device 1: stored : 963 expected : 853.333 + ... + + shows that device **0** stored **951** values and was expected to store **853**. + Implies **--show-statistics**. + +.. option:: --show-utilization-all + + Displays the same as **--show-utilization** but does not suppress + output when the weight of a device is zero. + Implies **--show-statistics**. + +.. option:: --show-choose-tries + + Displays how many attempts were needed to find a device mapping. + For instance:: + + 0: 95224 + 1: 3745 + 2: 2225 + .. + + shows that **95224** mappings succeeded without retries, **3745** + mappings succeeded with one attempts, etc. There are as many rows + as the value of the **--set-choose-total-tries** option. + +.. option:: --output-csv + + Creates CSV files (in the current directory) containing information + documented by **--help-output**. The files are named after the rule + used when collecting the statistics. For instance, if the rule + : 'metadata' is used, the CSV files will be:: + + metadata-absolute_weights.csv + metadata-device_utilization.csv + ... + + The first line of the file shortly explains the column layout. For + instance:: + + metadata-absolute_weights.csv + Device ID, Absolute Weight + 0,1 + ... + +.. option:: --output-name NAME + + Prepend **NAME** to the file names generated when **--output-csv** + is specified. For instance **--output-name FOO** will create + files:: + + FOO-metadata-absolute_weights.csv + FOO-metadata-device_utilization.csv + ... + +The **--set-...** options can be used to modify the tunables of the +input crush map. The input crush map is modified in +memory. For example:: + + $ crushtool -i mymap --test --show-bad-mappings + bad mapping rule 1 x 781 num_rep 7 result [8,10,2,11,6,9] + +could be fixed by increasing the **choose-total-tries** as follows: + + $ crushtool -i mymap --test \ + --show-bad-mappings \ + --set-choose-total-tries 500 + +Building a map with --build +=========================== + +The build mode will generate hierarchical maps. The first argument +specifies the number of devices (leaves) in the CRUSH hierarchy. Each +layer describes how the layer (or devices) preceding it should be +grouped. + +Each layer consists of:: + + bucket ( uniform | list | tree | straw ) size + +The **bucket** is the type of the buckets in the layer +(e.g. "rack"). Each bucket name will be built by appending a unique +number to the **bucket** string (e.g. "rack0", "rack1"...). + +The second component is the type of bucket: **straw** should be used +most of the time. + +The third component is the maximum size of the bucket. A size of zero +means a bucket of infinite capacity. + + +Example +======= + +Suppose we have two rows with two racks each and 20 nodes per rack. Suppose +each node contains 4 storage devices for Ceph OSD Daemons. This configuration +allows us to deploy 320 Ceph OSD Daemons. Lets assume a 42U rack with 2U nodes, +leaving an extra 2U for a rack switch. + +To reflect our hierarchy of devices, nodes, racks and rows, we would execute +the following:: + + $ crushtool -o crushmap --build --num_osds 320 \ + node straw 4 \ + rack straw 20 \ + row straw 2 \ + root straw 0 + # id weight type name reweight + -87 320 root root + -85 160 row row0 + -81 80 rack rack0 + -1 4 node node0 + 0 1 osd.0 1 + 1 1 osd.1 1 + 2 1 osd.2 1 + 3 1 osd.3 1 + -2 4 node node1 + 4 1 osd.4 1 + 5 1 osd.5 1 + ... + +CRUSH rules are created so the generated crushmap can be +tested. They are the same rules as the ones created by default when +creating a new Ceph cluster. They can be further edited with:: + + # decompile + crushtool -d crushmap -o map.txt + + # edit + emacs map.txt + + # recompile + crushtool -c map.txt -o crushmap + +Reclassify +========== + +The *reclassify* function allows users to transition from older maps that +maintain parallel hierarchies for OSDs of different types to a modern CRUSH +map that makes use of the *device class* feature. For more information, +see http://docs.ceph.com/docs/master/rados/operations/crush-map-edits/#migrating-from-a-legacy-ssd-rule-to-device-classes. + +Example output from --test +========================== + +See https://github.com/ceph/ceph/blob/master/src/test/cli/crushtool/set-choose.t +for sample ``crushtool --test`` commands and output produced thereby. + +Availability +============ + +**crushtool** is part of Ceph, a massively scalable, open-source, distributed storage system. Please +refer to the Ceph documentation at http://ceph.com/docs for more +information. + + +See also +======== + +:doc:`ceph <ceph>`\(8), +:doc:`osdmaptool <osdmaptool>`\(8), + +Authors +======= + +John Wilkins, Sage Weil, Loic Dachary diff --git a/doc/man/8/librados-config.rst b/doc/man/8/librados-config.rst new file mode 100644 index 00000000..940e8c2e --- /dev/null +++ b/doc/man/8/librados-config.rst @@ -0,0 +1,46 @@ +:orphan: + +======================================================= + librados-config -- display information about librados +======================================================= + +.. program:: librados-config + +Synopsis +======== + +| **librados-config** [ --version ] [ --vernum ] + + +Description +=========== + +**librados-config** is a utility that displays information about the + installed ``librados``. + + +Options +======= + +.. option:: --version + + Display ``librados`` version + +.. option:: --vernum + + Display the ``librados`` version code + + +Availability +============ + +**librados-config** is part of Ceph, a massively scalable, open-source, distributed storage system. +Please refer to the Ceph documentation at http://ceph.com/docs for +more information. + + +See also +======== + +:doc:`ceph <ceph>`\(8), +:doc:`rados <rados>`\(8) diff --git a/doc/man/8/monmaptool.rst b/doc/man/8/monmaptool.rst new file mode 100644 index 00000000..9971b558 --- /dev/null +++ b/doc/man/8/monmaptool.rst @@ -0,0 +1,107 @@ +:orphan: + +========================================================== + monmaptool -- ceph monitor cluster map manipulation tool +========================================================== + +.. program:: monmaptool + +Synopsis +======== + +| **monmaptool** *mapfilename* [ --clobber ] [ --print ] [ --create ] + [ --add *ip*:*port* *...* ] [ --rm *ip*:*port* *...* ] + + +Description +=========== + +**monmaptool** is a utility to create, view, and modify a monitor +cluster map for the Ceph distributed storage system. The monitor map +specifies the only fixed addresses in the Ceph distributed system. +All other daemons bind to arbitrary addresses and register themselves +with the monitors. + +When creating a map with --create, a new monitor map with a new, +random UUID will be created. It should be followed by one or more +monitor addresses. + +The default Ceph monitor port is 6789. + + +Options +======= + +.. option:: --print + + will print a plaintext dump of the map, after any modifications are + made. + +.. option:: --clobber + + will allow monmaptool to overwrite mapfilename if changes are made. + +.. option:: --create + + will create a new monitor map with a new UUID (and with it, a new, + empty Ceph file system). + +.. option:: --generate + + generate a new monmap based on the values on the command line or specified + in the ceph configuration. This is, in order of preference, + + #. ``--monmap filename`` to specify a monmap to load + #. ``--mon-host 'host1,ip2'`` to specify a list of hosts or ip addresses + #. ``[mon.foo]`` sections containing ``mon addr`` settings in the config. Note that this method is not recommended and support will be removed in a future release. + +.. option:: --filter-initial-members + + filter the initial monmap by applying the ``mon initial members`` + setting. Monitors not present in that list will be removed, and + initial members not present in the map will be added with dummy + addresses. + +.. option:: --add name ip:port + + will add a monitor with the specified ip:port to the map. + +.. option:: --rm name + + will remove the monitor with the specified ip:port from the map. + +.. option:: --fsid uuid + + will set the fsid to the given uuid. If not specified with --create, a random fsid will be generated. + + +Example +======= + +To create a new map with three monitors (for a fresh Ceph file system):: + + monmaptool --create --add mon.a 192.168.0.10:6789 --add mon.b 192.168.0.11:6789 \ + --add mon.c 192.168.0.12:6789 --clobber monmap + +To display the contents of the map:: + + monmaptool --print monmap + +To replace one monitor:: + + monmaptool --rm mon.a --add mon.a 192.168.0.9:6789 --clobber monmap + + +Availability +============ + +**monmaptool** is part of Ceph, a massively scalable, open-source, distributed +storage system. Please refer to the Ceph documentation at http://ceph.com/docs +for more information. + + +See also +======== + +:doc:`ceph <ceph>`\(8), +:doc:`crushtool <crushtool>`\(8), diff --git a/doc/man/8/mount.ceph.rst b/doc/man/8/mount.ceph.rst new file mode 100644 index 00000000..4f22cd29 --- /dev/null +++ b/doc/man/8/mount.ceph.rst @@ -0,0 +1,185 @@ +:orphan: + +======================================== + mount.ceph -- mount a ceph file system +======================================== + +.. program:: mount.ceph + +Synopsis +======== + +| **mount.ceph** [*monaddr1*\ ,\ *monaddr2*\ ,...]:/[*subdir*] *dir* [ + -o *options* ] + + +Description +=========== + +**mount.ceph** is a helper for mounting the Ceph file system on +a Linux host. It serves to resolve monitor hostname(s) into IP +addresses and read authentication keys from disk; the Linux kernel +client component does most of the real work. In fact, it is possible +to mount a non-authenticated Ceph file system without mount.ceph by +specifying monitor address(es) by IP:: + + mount -t ceph 1.2.3.4:/ mountpoint + +Each monitor address monaddr takes the form host[:port]. If the port +is not specified, the Ceph default of 6789 is assumed. + +Multiple monitor addresses can be separated by commas. Only one +responsible monitor is needed to successfully mount; the client will +learn about all monitors from any responsive monitor. However, it is a +good idea to specify more than one in case one happens to be down at +the time of mount. + +If the host portion of the device is left blank, then **mount.ceph** will +attempt to determine monitor addresses using local configuration files +and/or DNS SRV records. + +A subdirectory subdir may be specified if a subset of the file system +is to be mounted. + +Mount helper application conventions dictate that the first two +options are device to be mounted and destination path. Options must be +passed only after these fixed arguments. + + +Options +======= + +:command:`wsize` + int (bytes), max write size. Default: 16777216 (16*1024*1024) (writeback uses smaller of wsize + and stripe unit) + +:command:`rsize` + int (bytes), max read size. Default: 16777216 (16*1024*1024) + +:command:`rasize` + int (bytes), max readahead. Default: 8388608 (8192*1024) + +:command:`osdtimeout` + int (seconds), Default: 60 + +:command:`osdkeepalive` + int, Default: 5 + +:command:`mount_timeout` + int (seconds), Default: 60 + +:command:`osd_idle_ttl` + int (seconds), Default: 60 + +:command:`caps_wanted_delay_min` + int, cap release delay, Default: 5 + +:command:`caps_wanted_delay_max` + int, cap release delay, Default: 60 + +:command:`cap_release_safety` + int, Default: calculated + +:command:`readdir_max_entries` + int, Default: 1024 + +:command:`readdir_max_bytes` + int, Default: 524288 (512*1024) + +:command:`write_congestion_kb` + int (kb), max writeback in flight. scale with available + memory. Default: calculated from available memory + +:command:`snapdirname` + string, set the name of the hidden snapdir. Default: .snap + +:command:`name` + RADOS user to authenticate as when using cephx. Default: guest + +:command:`secret` + secret key for use with cephx. This option is insecure because it exposes + the secret on the command line. To avoid this, use the secretfile option. + +:command:`secretfile` + path to file containing the secret key to use with cephx + +:command:`ip` + my ip + +:command:`noshare` + create a new client instance, instead of sharing an existing + instance of a client mounting the same cluster + +:command:`dirstat` + funky `cat dirname` for stats, Default: off + +:command:`nodirstat` + no funky `cat dirname` for stats + +:command:`rbytes` + Report the recursive size of the directory contents for st_size on + directories. Default: off + +:command:`norbytes` + Do not report the recursive size of the directory contents for + st_size on directories. + +:command:`nocrc` + no data crc on writes + +:command:`noasyncreaddir` + no dcache readdir + +:command:`conf` + Path to a ceph.conf file. This is used to initialize the ceph context + for autodiscovery of monitor addresses and auth secrets. The default is + to use the standard search path for ceph.conf files. + +Mount Secrets +============= +If the `secret` and `secretfile` options are not specified on the command-line +then the mount helper will spawn a child process that will use the standard +ceph library routines to find a keyring and fetch the secret from it. + +Examples +======== + +Mount the full file system:: + + mount.ceph monhost:/ /mnt/foo + +If there are multiple monitors:: + + mount.ceph monhost1,monhost2,monhost3:/ /mnt/foo + +If :doc:`ceph-mon <ceph-mon>`\(8) is running on a non-standard +port:: + + mount.ceph monhost1:7000,monhost2:7000,monhost3:7000:/ /mnt/foo + +To automatically determine the monitor addresses from local configuration:: + + mount.ceph :/ /mnt/foo + +To mount only part of the namespace:: + + mount.ceph monhost1:/some/small/thing /mnt/thing + +Assuming mount.ceph(8) is installed properly, it should be +automatically invoked by mount(8) like so:: + + mount -t ceph monhost:/ /mnt/foo + + +Availability +============ + +**mount.ceph** is part of Ceph, a massively scalable, open-source, distributed storage system. Please +refer to the Ceph documentation at http://ceph.com/docs for more +information. + +See also +======== + +:doc:`ceph-fuse <ceph-fuse>`\(8), +:doc:`ceph <ceph>`\(8) diff --git a/doc/man/8/mount.fuse.ceph.rst b/doc/man/8/mount.fuse.ceph.rst new file mode 100644 index 00000000..0b3b2d67 --- /dev/null +++ b/doc/man/8/mount.fuse.ceph.rst @@ -0,0 +1,71 @@ +:orphan: + +==================================================== + mount.fuse.ceph -- mount ceph-fuse from /etc/fstab. +==================================================== + +.. program:: mount.fuse.ceph + +Synopsis +======== + +| **mount.fuse.ceph** [-h] [-o OPTIONS [*OPTIONS* ...]] + device [*device* ...] + mountpoint [*mountpoint* ...] + +Description +=========== + +**mount.fuse.ceph** is a helper for mounting ceph-fuse from +``/etc/fstab``. + +To use mount.fuse.ceph, add an entry in ``/etc/fstab`` like:: + + DEVICE PATH TYPE OPTIONS + none /mnt/ceph fuse.ceph ceph.id=admin,_netdev,defaults 0 0 + none /mnt/ceph fuse.ceph ceph.name=client.admin,_netdev,defaults 0 0 + none /mnt/ceph fuse.ceph ceph.id=myuser,ceph.conf=/etc/ceph/foo.conf,_netdev,defaults 0 0 + +ceph-fuse options are specified in the ``OPTIONS`` column and must begin +with '``ceph.``' prefix. This way ceph related fs options will be passed to +ceph-fuse and others will be ignored by ceph-fuse. + +Options +======= + +.. option:: ceph.id=<username> + + Specify that the ceph-fuse will authenticate as the given user. + +.. option:: ceph.name=client.admin + + Specify that the ceph-fuse will authenticate as client.admin + +.. option:: ceph.conf=/etc/ceph/foo.conf + + Sets 'conf' option to /etc/ceph/foo.conf via ceph-fuse command line. + + +Any valid ceph-fuse options can be passed this way. + +Additional Info +=============== + +The old format /etc/fstab entries are also supported:: + + DEVICE PATH TYPE OPTIONS + id=admin /mnt/ceph fuse.ceph defaults 0 0 + id=myuser,conf=/etc/ceph/foo.conf /mnt/ceph fuse.ceph defaults 0 0 + +Availability +============ + +**mount.fuse.ceph** is part of Ceph, a massively scalable, open-source, distributed storage system. Please +refer to the Ceph documentation at http://ceph.com/docs for more +information. + +See also +======== + +:doc:`ceph-fuse <ceph-fuse>`\(8), +:doc:`ceph <ceph>`\(8) diff --git a/doc/man/8/osdmaptool.rst b/doc/man/8/osdmaptool.rst new file mode 100644 index 00000000..131e981f --- /dev/null +++ b/doc/man/8/osdmaptool.rst @@ -0,0 +1,320 @@ +:orphan: + +.. _osdmaptool: + +====================================================== + osdmaptool -- ceph osd cluster map manipulation tool +====================================================== + +.. program:: osdmaptool + +Synopsis +======== + +| **osdmaptool** *mapfilename* [--print] [--createsimple *numosd* + [--pgbits *bitsperosd* ] ] [--clobber] +| **osdmaptool** *mapfilename* [--import-crush *crushmap*] +| **osdmaptool** *mapfilename* [--export-crush *crushmap*] +| **osdmaptool** *mapfilename* [--upmap *file*] [--upmap-max *max-optimizations*] + [--upmap-deviation *max-deviation*] [--upmap-pool *poolname*] + [--upmap-save *file*] [--upmap-save *newosdmap*] [--upmap-active] +| **osdmaptool** *mapfilename* [--upmap-cleanup] [--upmap-save *newosdmap*] + + +Description +=========== + +**osdmaptool** is a utility that lets you create, view, and manipulate +OSD cluster maps from the Ceph distributed storage system. Notably, it +lets you extract the embedded CRUSH map or import a new CRUSH map. +It can also simulate the upmap balancer mode so you can get a sense of +what is needed to balance your PGs. + + +Options +======= + +.. option:: --print + + will simply make the tool print a plaintext dump of the map, after + any modifications are made. + +.. option:: --dump <format> + + displays the map in plain text when <format> is 'plain', 'json' if specified + format is not supported. This is an alternative to the print option. + +.. option:: --clobber + + will allow osdmaptool to overwrite mapfilename if changes are made. + +.. option:: --import-crush mapfile + + will load the CRUSH map from mapfile and embed it in the OSD map. + +.. option:: --export-crush mapfile + + will extract the CRUSH map from the OSD map and write it to + mapfile. + +.. option:: --createsimple numosd [--pg-bits bitsperosd] [--pgp-bits bits] + + will create a relatively generic OSD map with the numosd devices. + If --pg-bits is specified, the initial placement group counts will + be set with bitsperosd bits per OSD. That is, the pg_num map + attribute will be set to numosd shifted by bitsperosd. + If --pgp-bits is specified, then the pgp_num map attribute will + be set to numosd shifted by bits. + +.. option:: --create-from-conf + + creates an osd map with default configurations. + +.. option:: --test-map-pgs [--pool poolid] [--range-first <first> --range-last <last>] + + will print out the mappings from placement groups to OSDs. + If range is specified, then it iterates from first to last in the directory + specified by argument to osdmaptool. + Eg: **osdmaptool --test-map-pgs --range-first 0 --range-last 2 osdmap_dir**. + This will iterate through the files named 0,1,2 in osdmap_dir. + +.. option:: --test-map-pgs-dump [--pool poolid] [--range-first <first> --range-last <last>] + + will print out the summary of all placement groups and the mappings from them to the mapped OSDs. + If range is specified, then it iterates from first to last in the directory + specified by argument to osdmaptool. + Eg: **osdmaptool --test-map-pgs-dump --range-first 0 --range-last 2 osdmap_dir**. + This will iterate through the files named 0,1,2 in osdmap_dir. + +.. option:: --test-map-pgs-dump-all [--pool poolid] [--range-first <first> --range-last <last>] + + will print out the summary of all placement groups and the mappings + from them to all the OSDs. + If range is specified, then it iterates from first to last in the directory + specified by argument to osdmaptool. + Eg: **osdmaptool --test-map-pgs-dump-all --range-first 0 --range-last 2 osdmap_dir**. + This will iterate through the files named 0,1,2 in osdmap_dir. + +.. option:: --test-random + + does a random mapping of placement groups to the OSDs. + +.. option:: --test-map-pg <pgid> + + map a particular placement group(specified by pgid) to the OSDs. + +.. option:: --test-map-object <objectname> [--pool <poolid>] + + map a particular placement group(specified by objectname) to the OSDs. + +.. option:: --test-crush [--range-first <first> --range-last <last>] + + map placement groups to acting OSDs. + If range is specified, then it iterates from first to last in the directory + specified by argument to osdmaptool. + Eg: **osdmaptool --test-crush --range-first 0 --range-last 2 osdmap_dir**. + This will iterate through the files named 0,1,2 in osdmap_dir. + +.. option:: --mark-up-in + + mark osds up and in (but do not persist). + +.. option:: --mark-out + + mark an osd as out (but do not persist) + +.. option:: --tree + + Displays a hierarchical tree of the map. + +.. option:: --clear-temp + + clears pg_temp and primary_temp variables. + +.. option:: --clean-temps + + clean pg_temps. + +.. option:: --health + + dump health checks + +.. option:: --with-default-pool + + include default pool when creating map + +.. option:: --upmap-cleanup <file> + + clean up pg_upmap[_items] entries, writing commands to <file> [default: - for stdout] + +.. option:: --upmap <file> + + calculate pg upmap entries to balance pg layout writing commands to <file> [default: - for stdout] + +.. option:: --upmap-max <max-optimizations> + + set max upmap entries to calculate [default: 10] + +.. option:: --upmap-deviation <max-deviation> + + max deviation from target [default: 5] + +.. option:: --upmap-pool <poolname> + + restrict upmap balancing to 1 pool or the option can be repeated for multiple pools + +.. option:: --upmap-save + + write modified OSDMap with upmap changes + +.. option:: --upmap-active + + Act like an active balancer, keep applying changes until balanced + + +Example +======= + +To create a simple map with 16 devices:: + + osdmaptool --createsimple 16 osdmap --clobber + +To view the result:: + + osdmaptool --print osdmap + +To view the mappings of placement groups for pool 1:: + + osdmaptool osdmap --test-map-pgs-dump --pool 1 + + pool 0 pg_num 8 + 1.0 [0,2,1] 0 + 1.1 [2,0,1] 2 + 1.2 [0,1,2] 0 + 1.3 [2,0,1] 2 + 1.4 [0,2,1] 0 + 1.5 [0,2,1] 0 + 1.6 [0,1,2] 0 + 1.7 [1,0,2] 1 + #osd count first primary c wt wt + osd.0 8 5 5 1 1 + osd.1 8 1 1 1 1 + osd.2 8 2 2 1 1 + in 3 + avg 8 stddev 0 (0x) (expected 2.3094 0.288675x)) + min osd.0 8 + max osd.0 8 + size 0 0 + size 1 0 + size 2 0 + size 3 8 + +In which, + #. pool 1 has 8 placement groups. And two tables follow: + #. A table for placement groups. Each row presents a placement group. With columns of: + + * placement group id, + * acting set, and + * primary OSD. + #. A table for all OSDs. Each row presents an OSD. With columns of: + + * count of placement groups being mapped to this OSD, + * count of placement groups where this OSD is the first one in their acting sets, + * count of placement groups where this OSD is the primary of them, + * the CRUSH weight of this OSD, and + * the weight of this OSD. + #. Looking at the number of placement groups held by 3 OSDs. We have + + * avarge, stddev, stddev/average, expected stddev, expected stddev / average + * min and max + #. The number of placement groups mapping to n OSDs. In this case, all 8 placement + groups are mapping to 3 different OSDs. + +In a less-balanced cluster, we could have following output for the statistics of +placement group distribution, whose standard deviation is 1.41421:: + + #osd count first primary c wt wt + osd.0 8 5 5 1 1 + osd.1 8 1 1 1 1 + osd.2 8 2 2 1 1 + + #osd count first primary c wt wt + osd.0 33 9 9 0.0145874 1 + osd.1 34 14 14 0.0145874 1 + osd.2 31 7 7 0.0145874 1 + osd.3 31 13 13 0.0145874 1 + osd.4 30 14 14 0.0145874 1 + osd.5 33 7 7 0.0145874 1 + in 6 + avg 32 stddev 1.41421 (0.0441942x) (expected 5.16398 0.161374x)) + min osd.4 30 + max osd.1 34 + size 00 + size 10 + size 20 + size 364 + + To simulate the active balancer in upmap mode:: + + osdmaptool --upmap upmaps.out --upmap-active --upmap-deviation 6 --upmap-max 11 osdmap + + osdmaptool: osdmap file 'osdmap' + writing upmap command output to: upmaps.out + checking for upmap cleanups + upmap, max-count 11, max deviation 6 + pools movies photos metadata data + prepared 11/11 changes + Time elapsed 0.00310404 secs + pools movies photos metadata data + prepared 11/11 changes + Time elapsed 0.00283402 secs + pools data metadata movies photos + prepared 11/11 changes + Time elapsed 0.003122 secs + pools photos metadata data movies + prepared 11/11 changes + Time elapsed 0.00324372 secs + pools movies metadata data photos + prepared 1/11 changes + Time elapsed 0.00222609 secs + pools data movies photos metadata + prepared 0/11 changes + Time elapsed 0.00209916 secs + Unable to find further optimization, or distribution is already perfect + osd.0 pgs 41 + osd.1 pgs 42 + osd.2 pgs 42 + osd.3 pgs 41 + osd.4 pgs 46 + osd.5 pgs 39 + osd.6 pgs 39 + osd.7 pgs 43 + osd.8 pgs 41 + osd.9 pgs 46 + osd.10 pgs 46 + osd.11 pgs 46 + osd.12 pgs 46 + osd.13 pgs 41 + osd.14 pgs 40 + osd.15 pgs 40 + osd.16 pgs 39 + osd.17 pgs 46 + osd.18 pgs 46 + osd.19 pgs 39 + osd.20 pgs 42 + Total time elapsed 0.0167765 secs, 5 rounds + + +Availability +============ + +**osdmaptool** is part of Ceph, a massively scalable, open-source, distributed storage system. Please +refer to the Ceph documentation at http://ceph.com/docs for more +information. + + +See also +======== + +:doc:`ceph <ceph>`\(8), +:doc:`crushtool <crushtool>`\(8), diff --git a/doc/man/8/rados.rst b/doc/man/8/rados.rst new file mode 100644 index 00000000..710be735 --- /dev/null +++ b/doc/man/8/rados.rst @@ -0,0 +1,251 @@ +:orphan: + +======================================= + rados -- rados object storage utility +======================================= + +.. program:: rados + +Synopsis +======== + +| **rados** [ *options* ] [ *command* ] + + +Description +=========== + +**rados** is a utility for interacting with a Ceph object storage +cluster (RADOS), part of the Ceph distributed storage system. + + +Options +======= + +.. option:: -p pool, --pool pool + + Interact with the given pool. Required by most commands. + +.. option:: --pgid + + As an alternative to ``--pool``, ``--pgid`` also allow users to specify the + PG id to which the command will be directed. With this option, certain + commands like ``ls`` allow users to limit the scope of the command to the given PG. + +.. option:: -N namespace, --namespace namespace + + Specify the rados namespace to use for the object. + +.. option:: -s snap, --snap snap + + Read from the given pool snapshot. Valid for all pool-specific read operations. + +.. option:: -i infile + + will specify an input file to be passed along as a payload with the + command to the monitor cluster. This is only used for specific + monitor commands. + +.. option:: -o outfile + + will write any payload returned by the monitor cluster with its + reply to outfile. Only specific monitor commands (e.g. osd getmap) + return a payload. + +.. option:: -c ceph.conf, --conf=ceph.conf + + Use ceph.conf configuration file instead of the default + /etc/ceph/ceph.conf to determine monitor addresses during startup. + +.. option:: -m monaddress[:port] + + Connect to specified monitor (instead of looking through ceph.conf). + +.. option:: -b block_size + + Set the block size for put/get/append ops and for write benchmarking. + +.. option:: --striper + + Uses the striping API of rados rather than the default one. + Available for stat, stat2, get, put, append, truncate, rm, ls + and all xattr related operation + +.. option:: -O object_size + + Set the object size for put/get ops and for write benchmarking + + +Global commands +=============== + +:command:`lspools` + List object pools + +:command:`df` + Show utilization statistics, including disk usage (bytes) and object + counts, over the entire system and broken down by pool. + +:command:`list-inconsistent-pg` *pool* + List inconsistent PGs in given pool. + +:command:`list-inconsistent-obj` *pgid* + List inconsistent objects in given PG. + +:command:`list-inconsistent-snapset` *pgid* + List inconsistent snapsets in given PG. + + +Pool specific commands +====================== + +:command:`get` *name* *outfile* + Read object name from the cluster and write it to outfile. + +:command:`put` *name* *infile* [--offset offset] + Write object name with start offset (default:0) to the cluster with contents from infile. + **Warning:** The put command creates a single RADOS object, sized just as + large as your input file. Unless your objects are of reasonable and consistent sizes, that + is probably not what you want -- consider using RGW/S3, CephFS, or RBD instead. + +:command:`append` *name* *infile* + Append object name to the cluster with contents from infile. + +:command:`rm` *name* + Remove object name. + +:command:`listwatchers` *name* + List the watchers of object name. + +:command:`ls` *outfile* + List objects in the given pool and write to outfile. Instead of ``--pool`` if ``--pgid`` will be specified, ``ls`` will only list the objects in the given PG. + +:command:`lssnap` + List snapshots for given pool. + +:command:`clonedata` *srcname* *dstname* --object-locator *key* + Clone object byte data from *srcname* to *dstname*. Both objects must be stored with the locator key *key* (usually either *srcname* or *dstname*). Object attributes and omap keys are not copied or cloned. + +:command:`mksnap` *foo* + Create pool snapshot named *foo*. + +:command:`rmsnap` *foo* + Remove pool snapshot named *foo*. + +:command:`bench` *seconds* *mode* [ -b *objsize* ] [ -t *threads* ] + Benchmark for *seconds*. The mode can be *write*, *seq*, or + *rand*. *seq* and *rand* are read benchmarks, either + sequential or random. Before running one of the reading benchmarks, + run a write benchmark with the *--no-cleanup* option. The default + object size is 4 MB, and the default number of simulated threads + (parallel writes) is 16. The *--run-name <label>* option is useful + for benchmarking a workload test from multiple clients. The *<label>* + is an arbitrary object name. It is "benchmark_last_metadata" by + default, and is used as the underlying object name for "read" and + "write" ops. + Note: -b *objsize* option is valid only in *write* mode. + Note: *write* and *seq* must be run on the same host otherwise the + objects created by *write* will have names that will fail *seq*. + +:command:`cleanup` [ --run-name *run_name* ] [ --prefix *prefix* ] + Clean up a previous benchmark operation. + Note: the default run-name is "benchmark_last_metadata" + +:command:`listxattr` *name* + List all extended attributes of an object. + +:command:`getxattr` *name* *attr* + Dump the extended attribute value of *attr* of an object. + +:command:`setxattr` *name* *attr* *value* + Set the value of *attr* in the extended attributes of an object. + +:command:`rmxattr` *name* *attr* + Remove *attr* from the extended attributes of an object. + +:command:`stat` *name* + Get stat (ie. mtime, size) of given object + +:command:`stat2` *name* + Get stat (similar to stat, but with high precision time) of given object + +:command:`listomapkeys` *name* + List all the keys stored in the object map of object name. + +:command:`listomapvals` *name* + List all key/value pairs stored in the object map of object name. + The values are dumped in hexadecimal. + +:command:`getomapval` [ --omap-key-file *file* ] *name* *key* [ *out-file* ] + Dump the hexadecimal value of key in the object map of object name. + If the optional *out-file* argument is not provided, the value will be + written to standard output. + +:command:`setomapval` [ --omap-key-file *file* ] *name* *key* [ *value* ] + Set the value of key in the object map of object name. If the optional + *value* argument is not provided, the value will be read from standard + input. + +:command:`rmomapkey` [ --omap-key-file *file* ] *name* *key* + Remove key from the object map of object name. + +:command:`getomapheader` *name* + Dump the hexadecimal value of the object map header of object name. + +:command:`setomapheader` *name* *value* + Set the value of the object map header of object name. + +:command:`export` *filename* + Serialize pool contents to a file or standard output.\n" + +:command:`import` [--dry-run] [--no-overwrite] < filename | - > + Load pool contents from a file or standard input + + +Examples +======== + +To view cluster utilization:: + + rados df + +To get a list object in pool foo sent to stdout:: + + rados -p foo ls - + +To get a list of objects in PG 0.6:: + + rados --pgid 0.6 ls + +To write an object:: + + rados -p foo put myobject blah.txt + +To create a snapshot:: + + rados -p foo mksnap mysnap + +To delete the object:: + + rados -p foo rm myobject + +To read a previously snapshotted version of an object:: + + rados -p foo -s mysnap get myobject blah.txt.old + +To list inconsistent objects in PG 0.6:: + + rados list-inconsistent-obj 0.6 --format=json-pretty + + +Availability +============ + +**rados** is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer to +the Ceph documentation at http://ceph.com/docs for more information. + + +See also +======== + +:doc:`ceph <ceph>`\(8) diff --git a/doc/man/8/radosgw-admin.rst b/doc/man/8/radosgw-admin.rst new file mode 100644 index 00000000..136c8a96 --- /dev/null +++ b/doc/man/8/radosgw-admin.rst @@ -0,0 +1,934 @@ +:orphan: + +================================================================= + radosgw-admin -- rados REST gateway user administration utility +================================================================= + +.. program:: radosgw-admin + +Synopsis +======== + +| **radosgw-admin** *command* [ *options* *...* ] + + +Description +=========== + +:program:`radosgw-admin` is a RADOS gateway user administration utility. It +allows creating and modifying users. + + +Commands +======== + +:program:`radosgw-admin` utility uses many commands for administration purpose +which are as follows: + +:command:`user create` + Create a new user. + +:command:`user modify` + Modify a user. + +:command:`user info` + Display information of a user, and any potentially available + subusers and keys. + +:command:`user rm` + Remove a user. + +:command:`user suspend` + Suspend a user. + +:command:`user enable` + Re-enable user after suspension. + +:command:`user check` + Check user info. + +:command:`user stats` + Show user stats as accounted by quota subsystem. + +:command:`user list` + List all users. + +:command:`caps add` + Add user capabilities. + +:command:`caps rm` + Remove user capabilities. + +:command:`subuser create` + Create a new subuser (primarily useful for clients using the Swift API). + +:command:`subuser modify` + Modify a subuser. + +:command:`subuser rm` + Remove a subuser. + +:command:`key create` + Create access key. + +:command:`key rm` + Remove access key. + +:command:`bucket list` + List buckets, or, if bucket specified with --bucket=<bucket>, + list its objects. If bucket specified adding --allow-unordered + removes ordering requirement, possibly generating results more + quickly in buckets with large number of objects. + +:command:`bucket limit check` + Show bucket sharding stats. + +:command:`bucket link` + Link bucket to specified user. + +:command:`bucket unlink` + Unlink bucket from specified user. + +:command:`bucket stats` + Returns bucket statistics. + +:command:`bucket rm` + Remove a bucket. + +:command:`bucket check` + Check bucket index. + +:command:`bucket rewrite` + Rewrite all objects in the specified bucket. + +:command:`bucket reshard` + Reshard a bucket. + +:command:`bucket sync disable` + Disable bucket sync. + +:command:`bucket sync enable` + Enable bucket sync. + +:command:`bi get` + Retrieve bucket index object entries. + +:command:`bi put` + Store bucket index object entries. + +:command:`bi list` + List raw bucket index entries. + +:command:`bi purge` + Purge bucket index entries. + +:command:`object rm` + Remove an object. + +:command:`object stat` + Stat an object for its metadata. + +:command:`object unlink` + Unlink object from bucket index. + +:command:`object rewrite` + Rewrite the specified object. + +:command:`objects expire` + Run expired objects cleanup. + +:command:`period rm` + Remove a period. + +:command:`period get` + Get the period info. + +:command:`period get-current` + Get the current period info. + +:command:`period pull` + Pull a period. + +:command:`period push` + Push a period. + +:command:`period list` + List all periods. + +:command:`period update` + Update the staging period. + +:command:`period commit` + Commit the staging period. + +:command:`quota set` + Set quota params. + +:command:`quota enable` + Enable quota. + +:command:`quota disable` + Disable quota. + +:command:`global quota get` + View global quota parameters. + +:command:`global quota set` + Set global quota parameters. + +:command:`global quota enable` + Enable a global quota. + +:command:`global quota disable` + Disable a global quota. + +:command:`realm create` + Create a new realm. + +:command:`realm rm` + Remove a realm. + +:command:`realm get` + Show the realm info. + +:command:`realm get-default` + Get the default realm name. + +:command:`realm list` + List all realms. + +:command:`realm list-periods` + List all realm periods. + +:command:`realm rename` + Rename a realm. + +:command:`realm set` + Set the realm info (requires infile). + +:command:`realm default` + Set the realm as default. + +:command:`realm pull` + Pull a realm and its current period. + +:command:`zonegroup add` + Add a zone to a zonegroup. + +:command:`zonegroup create` + Create a new zone group info. + +:command:`zonegroup default` + Set the default zone group. + +:command:`zonegroup rm` + Remove a zone group info. + +:command:`zonegroup get` + Show the zone group info. + +:command:`zonegroup modify` + Modify an existing zonegroup. + +:command:`zonegroup set` + Set the zone group info (requires infile). + +:command:`zonegroup remove` + Remove a zone from a zonegroup. + +:command:`zonegroup rename` + Rename a zone group. + +:command:`zonegroup list` + List all zone groups set on this cluster. + +:command:`zonegroup placement list` + List zonegroup's placement targets. + +:command:`zonegroup placement add` + Add a placement target id to a zonegroup. + +:command:`zonegroup placement modify` + Modify a placement target of a specific zonegroup. + +:command:`zonegroup placement rm` + Remove a placement target from a zonegroup. + +:command:`zonegroup placement default` + Set a zonegroup's default placement target. + +:command:`zone create` + Create a new zone. + +:command:`zone rm` + Remove a zone. + +:command:`zone get` + Show zone cluster params. + +:command:`zone set` + Set zone cluster params (requires infile). + +:command:`zone modify` + Modify an existing zone. + +:command:`zone list` + List all zones set on this cluster. + +:command:`metadata sync status` + Get metadata sync status. + +:command:`metadata sync init` + Init metadata sync. + +:command:`metadata sync run` + Run metadata sync. + +:command:`data sync status` + Get data sync status of the specified source zone. + +:command:`data sync init` + Init data sync for the specified source zone. + +:command:`data sync run` + Run data sync for the specified source zone. + +:command:`sync error list` + list sync error. + +:command:`sync error trim` + trim sync error. + +:command:`zone rename` + Rename a zone. + +:command:`zone placement list` + List zone's placement targets. + +:command:`zone placement add` + Add a zone placement target. + +:command:`zone placement modify` + Modify a zone placement target. + +:command:`zone placement rm` + Remove a zone placement target. + +:command:`pool add` + Add an existing pool for data placement. + +:command:`pool rm` + Remove an existing pool from data placement set. + +:command:`pools list` + List placement active set. + +:command:`policy` + Display bucket/object policy. + +:command:`log list` + List log objects. + +:command:`log show` + Dump a log from specific object or (bucket + date + bucket-id). + (NOTE: required to specify formatting of date to "YYYY-MM-DD-hh") + +:command:`log rm` + Remove log object. + +:command:`usage show` + Show the usage information (with optional user and date range). + +:command:`usage trim` + Trim usage information (with optional user and date range). + +:command:`gc list` + Dump expired garbage collection objects (specify --include-all to list all + entries, including unexpired). + +:command:`gc process` + Manually process garbage. + +:command:`lc list` + List all bucket lifecycle progress. + +:command:`lc process` + Manually process lifecycle. + +:command:`metadata get` + Get metadata info. + +:command:`metadata put` + Put metadata info. + +:command:`metadata rm` + Remove metadata info. + +:command:`metadata list` + List metadata info. + +:command:`mdlog list` + List metadata log. + +:command:`mdlog trim` + Trim metadata log. + +:command:`mdlog status` + Read metadata log status. + +:command:`bilog list` + List bucket index log. + +:command:`bilog trim` + Trim bucket index log (use start-marker, end-marker). + +:command:`datalog list` + List data log. + +:command:`datalog trim` + Trim data log. + +:command:`datalog status` + Read data log status. + +:command:`orphans find` + Init and run search for leaked rados objects + +:command:`orphans finish` + Clean up search for leaked rados objects + +:command:`orphans list-jobs` + List the current job-ids for the orphans search. + +:command:`role create` + create a new AWS role for use with STS. + +:command:`role rm` + Remove a role. + +:command:`role get` + Get a role. + +:command:`role list` + List the roles with specified path prefix. + +:command:`role modify` + Modify the assume role policy of an existing role. + +:command:`role-policy put` + Add/update permission policy to role. + +:command:`role-policy list` + List the policies attached to a role. + +:command:`role-policy get` + Get the specified inline policy document embedded with the given role. + +:command:`role-policy rm` + Remove the policy attached to a role + +:command:`reshard add` + Schedule a resharding of a bucket + +:command:`reshard list` + List all bucket resharding or scheduled to be resharded + +:command:`reshard process` + Process of scheduled reshard jobs + +:command:`reshard status` + Resharding status of a bucket + +:command:`reshard cancel` + Cancel resharding a bucket + +Options +======= + +.. option:: -c ceph.conf, --conf=ceph.conf + + Use ``ceph.conf`` configuration file instead of the default + ``/etc/ceph/ceph.conf`` to determine monitor addresses during + startup. + +.. option:: -m monaddress[:port] + + Connect to specified monitor (instead of looking through ceph.conf). + +.. option:: --tenant=<tenant> + + Name of the tenant. + +.. option:: --uid=uid + + The radosgw user ID. + +.. option:: --subuser=<name> + + Name of the subuser. + +.. option:: --access-key=<key> + + S3 access key. + +.. option:: --email=email + + The e-mail address of the user. + +.. option:: --secret/--secret-key=<key> + + The secret key. + +.. option:: --gen-access-key + + Generate random access key (for S3). + +.. option:: --gen-secret + + Generate random secret key. + +.. option:: --key-type=<type> + + key type, options are: swift, s3. + +.. option:: --temp-url-key[-2]=<key> + + Temporary url key. + +.. option:: --max-buckets + + max number of buckets for a user (0 for no limit, negative value to disable bucket creation). + Default is 1000. + +.. option:: --access=<access> + + Set the access permissions for the sub-user. + Available access permissions are read, write, readwrite and full. + +.. option:: --display-name=<name> + + The display name of the user. + +.. option:: --admin + + Set the admin flag on the user. + +.. option:: --system + + Set the system flag on the user. + +.. option:: --bucket=bucket + + Specify the bucket name. + +.. option:: --pool=<pool> + + Specify the pool name. + Also used with `orphans find` as data pool to scan for leaked rados objects. + +.. option:: --object=object + + Specify the object name. + +.. option:: --date=yyyy-mm-dd + + The date in the format yyyy-mm-dd. + +.. option:: --start-date=yyyy-mm-dd + + The start date in the format yyyy-mm-dd. + +.. option:: --end-date=yyyy-mm-dd + + The end date in the format yyyy-mm-dd. + +.. option:: --bucket-id=<bucket-id> + + Specify the bucket id. + +.. option:: --shard-id=<shard-id> + + Optional for mdlog list, data sync status. Required for ``mdlog trim``. + +.. option:: --max-entries=<entries> + + Optional for listing operations to specify the max entires + +.. option:: --purge-data + + When specified, user removal will also purge all the user data. + +.. option:: --purge-keys + + When specified, subuser removal will also purge all the subuser keys. + +.. option:: --purge-objects + + When specified, the bucket removal will also purge all objects in it. + +.. option:: --metadata-key=<key> + + Key to retrieve metadata from with ``metadata get``. + +.. option:: --remote=<remote> + + Zone or zonegroup id of remote gateway. + +.. option:: --period=<id> + + Period id. + +.. option:: --url=<url> + + url for pushing/pulling period or realm. + +.. option:: --epoch=<number> + + Period epoch. + +.. option:: --commit + + Commit the period during 'period update'. + +.. option:: --staging + + Get the staging period info. + +.. option:: --master + + Set as master. + +.. option:: --master-zone=<id> + + Master zone id. + +.. option:: --rgw-realm=<name> + + The realm name. + +.. option:: --realm-id=<id> + + The realm id. + +.. option:: --realm-new-name=<name> + + New name of realm. + +.. option:: --rgw-zonegroup=<name> + + The zonegroup name. + +.. option:: --zonegroup-id=<id> + + The zonegroup id. + +.. option:: --zonegroup-new-name=<name> + + The new name of the zonegroup. + +.. option:: --rgw-zone=<zone> + + Zone in which radosgw is running. + +.. option:: --zone-id=<id> + + The zone id. + +.. option:: --zone-new-name=<name> + + The new name of the zone. + +.. option:: --source-zone + + The source zone for data sync. + +.. option:: --default + + Set the entity (realm, zonegroup, zone) as default. + +.. option:: --read-only + + Set the zone as read-only when adding to the zonegroup. + +.. option:: --placement-id + + Placement id for the zonegroup placement commands. + +.. option:: --tags=<list> + + The list of tags for zonegroup placement add and modify commands. + +.. option:: --tags-add=<list> + + The list of tags to add for zonegroup placement modify command. + +.. option:: --tags-rm=<list> + + The list of tags to remove for zonegroup placement modify command. + +.. option:: --endpoints=<list> + + The zone endpoints. + +.. option:: --index-pool=<pool> + + The placement target index pool. + +.. option:: --data-pool=<pool> + + The placement target data pool. + +.. option:: --data-extra-pool=<pool> + + The placement target data extra (non-ec) pool. + +.. option:: --placement-index-type=<type> + + The placement target index type (normal, indexless, or #id). + +.. option:: --tier-type=<type> + + The zone tier type. + +.. option:: --tier-config=<k>=<v>[,...] + + Set zone tier config keys, values. + +.. option:: --tier-config-rm=<k>[,...] + + Unset zone tier config keys. + +.. option:: --sync-from-all[=false] + + Set/reset whether zone syncs from all zonegroup peers. + +.. option:: --sync-from=[zone-name][,...] + + Set the list of zones to sync from. + +.. option:: --sync-from-rm=[zone-name][,...] + + Remove the zones from list of zones to sync from. + +.. option:: --fix + + Besides checking bucket index, will also fix it. + +.. option:: --check-objects + + bucket check: Rebuilds bucket index according to actual objects state. + +.. option:: --format=<format> + + Specify output format for certain operations. Supported formats: xml, json. + +.. option:: --sync-stats + + Option for 'user stats' command. When specified, it will update user stats with + the current stats reported by user's buckets indexes. + +.. option:: --show-log-entries=<flag> + + Enable/disable dump of log entries on log show. + +.. option:: --show-log-sum=<flag> + + Enable/disable dump of log summation on log show. + +.. option:: --skip-zero-entries + + Log show only dumps entries that don't have zero value in one of the numeric + field. + +.. option:: --infile + + Specify a file to read in when setting data. + +.. option:: --categories=<list> + + Comma separated list of categories, used in usage show. + +.. option:: --caps=<caps> + + List of caps (e.g., "usage=read, write; user=read". + +.. option:: --compression=<compression-algorithm> + + Placement target compression algorithm (lz4|snappy|zlib|zstd) + +.. option:: --yes-i-really-mean-it + + Required for certain operations. + +.. option:: --min-rewrite-size + + Specify the min object size for bucket rewrite (default 4M). + +.. option:: --max-rewrite-size + + Specify the max object size for bucket rewrite (default ULLONG_MAX). + +.. option:: --min-rewrite-stripe-size + + Specify the min stripe size for object rewrite (default 0). If the value + is set to 0, then the specified object will always be + rewritten for restriping. + +.. option:: --warnings-only + + When specified with bucket limit check, + list only buckets nearing or over the current max objects per shard value. + +.. option:: --bypass-gc + + When specified with bucket deletion, + triggers object deletions by not involving GC. + +.. option:: --inconsistent-index + + When specified with bucket deletion and bypass-gc set to true, + ignores bucket index consistency. + +Quota Options +============= + +.. option:: --max-objects + + Specify max objects (negative value to disable). + +.. option:: --max-size + + Specify max size (in B/K/M/G/T, negative value to disable). + +.. option:: --quota-scope + + The scope of quota (bucket, user). + + +Orphans Search Options +====================== + +.. option:: --num-shards + + Number of shards to use for keeping the temporary scan info + +.. option:: --orphan-stale-secs + + Number of seconds to wait before declaring an object to be an orphan. + Default is 86400 (24 hours). + +.. option:: --job-id + + Set the job id (for orphans find) + +.. option:: --max-concurrent-ios + + Maximum concurrent ios for orphans find. + Default is 32. + + +Orphans list-jobs options +========================= + +.. option:: --extra-info + + Provide extra info in the job list. + + +Role Options +============ + +.. option:: --role-name + + The name of the role to create. + +.. option:: --path + + The path to the role. + +.. option:: --assume-role-policy-doc + + The trust relationship policy document that grants an entity permission to + assume the role. + +.. option:: --policy-name + + The name of the policy document. + +.. option:: --policy-doc + + The permission policy document. + +.. option:: --path-prefix + + The path prefix for filtering the roles. + +Examples +======== + +Generate a new user:: + + $ radosgw-admin user create --display-name="johnny rotten" --uid=johnny + { "user_id": "johnny", + "rados_uid": 0, + "display_name": "johnny rotten", + "email": "", + "suspended": 0, + "subusers": [], + "keys": [ + { "user": "johnny", + "access_key": "TCICW53D9BQ2VGC46I44", + "secret_key": "tfm9aHMI8X76L3UdgE+ZQaJag1vJQmE6HDb5Lbrz"}], + "swift_keys": []} + +Remove a user:: + + $ radosgw-admin user rm --uid=johnny + +Remove a user and all associated buckets with their contents:: + + $ radosgw-admin user rm --uid=johnny --purge-data + +Remove a bucket:: + + $ radosgw-admin bucket rm --bucket=foo + +Link bucket to specified user:: + + $ radosgw-admin bucket link --bucket=foo --bucket_id=<bucket id> --uid=johnny + +Unlink bucket from specified user:: + + $ radosgw-admin bucket unlink --bucket=foo --uid=johnny + +Show the logs of a bucket from April 1st, 2012:: + + $ radosgw-admin log show --bucket=foo --date=2012-04-01-01 --bucket-id=default.14193.1 + +Show usage information for user from March 1st to (but not including) April 1st, 2012:: + + $ radosgw-admin usage show --uid=johnny \ + --start-date=2012-03-01 --end-date=2012-04-01 + +Show only summary of usage information for all users:: + + $ radosgw-admin usage show --show-log-entries=false + +Trim usage information for user until March 1st, 2012:: + + $ radosgw-admin usage trim --uid=johnny --end-date=2012-04-01 + + +Availability +============ + +:program:`radosgw-admin` is part of Ceph, a massively scalable, open-source, +distributed storage system. Please refer to the Ceph documentation at +http://ceph.com/docs for more information. + + +See also +======== + +:doc:`ceph <ceph>`\(8) +:doc:`radosgw <radosgw>`\(8) diff --git a/doc/man/8/radosgw.rst b/doc/man/8/radosgw.rst new file mode 100644 index 00000000..84a1aea2 --- /dev/null +++ b/doc/man/8/radosgw.rst @@ -0,0 +1,253 @@ +:orphan: + +=============================== + radosgw -- rados REST gateway +=============================== + +.. program:: radosgw + +Synopsis +======== + +| **radosgw** + + +Description +=========== + +:program:`radosgw` is an HTTP REST gateway for the RADOS object store, a part +of the Ceph distributed storage system. It is implemented as a FastCGI +module using libfcgi, and can be used in conjunction with any FastCGI +capable web server. + + +Options +======= + +.. option:: -c ceph.conf, --conf=ceph.conf + + Use ``ceph.conf`` configuration file instead of the default + ``/etc/ceph/ceph.conf`` to determine monitor addresses during startup. + +.. option:: -m monaddress[:port] + + Connect to specified monitor (instead of looking through ``ceph.conf``). + +.. option:: -i ID, --id ID + + Set the ID portion of name for radosgw + +.. option:: -n TYPE.ID, --name TYPE.ID + + Set the rados user name for the gateway (eg. client.radosgw.gateway) + +.. option:: --cluster NAME + + Set the cluster name (default: ceph) + +.. option:: -d + + Run in foreground, log to stderr + +.. option:: -f + + Run in foreground, log to usual location + +.. option:: --rgw-socket-path=path + + Specify a unix domain socket path. + +.. option:: --rgw-region=region + + The region where radosgw runs + +.. option:: --rgw-zone=zone + + The zone where radosgw runs + + +Configuration +============= + +Earlier RADOS Gateway had to be configured with ``Apache`` and ``mod_fastcgi``. +Now, ``mod_proxy_fcgi`` module is used instead of ``mod_fastcgi``. +``mod_proxy_fcgi`` works differently than a traditional FastCGI module. This +module requires the service of ``mod_proxy`` which provides support for the +FastCGI protocol. So, to be able to handle FastCGI protocol, both ``mod_proxy`` +and ``mod_proxy_fcgi`` have to be present in the server. Unlike ``mod_fastcgi``, +``mod_proxy_fcgi`` cannot start the application process. Some platforms have +``fcgistarter`` for that purpose. However, external launching of application +or process management may be available in the FastCGI application framework +in use. + +``Apache`` can be configured in a way that enables ``mod_proxy_fcgi`` to be used +with localhost tcp or through unix domain socket. ``mod_proxy_fcgi`` that doesn't +support unix domain socket such as the ones in Apache 2.2 and earlier versions of +Apache 2.4, needs to be configured for use with localhost tcp. Later versions of +Apache like Apache 2.4.9 or later support unix domain socket and as such they +allow for the configuration with unix domain socket instead of localhost tcp. + +The following steps show the configuration in Ceph's configuration file i.e, +``/etc/ceph/ceph.conf`` and the gateway configuration file i.e, +``/etc/httpd/conf.d/rgw.conf`` (RPM-based distros) or +``/etc/apache2/conf-available/rgw.conf`` (Debian-based distros) with localhost +tcp and through unix domain socket: + +#. For distros with Apache 2.2 and early versions of Apache 2.4 that use + localhost TCP and do not support Unix Domain Socket, append the following + contents to ``/etc/ceph/ceph.conf``:: + + [client.radosgw.gateway] + host = {hostname} + keyring = /etc/ceph/ceph.client.radosgw.keyring + rgw socket path = "" + log file = /var/log/ceph/client.radosgw.gateway.log + rgw frontends = fastcgi socket_port=9000 socket_host=0.0.0.0 + rgw print continue = false + +#. Add the following content in the gateway configuration file: + + For Debian/Ubuntu add in ``/etc/apache2/conf-available/rgw.conf``:: + + <VirtualHost *:80> + ServerName localhost + DocumentRoot /var/www/html + + ErrorLog /var/log/apache2/rgw_error.log + CustomLog /var/log/apache2/rgw_access.log combined + + # LogLevel debug + + RewriteEngine On + + RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization},L] + + SetEnv proxy-nokeepalive 1 + + ProxyPass / fcgi://localhost:9000/ + + </VirtualHost> + + For CentOS/RHEL add in ``/etc/httpd/conf.d/rgw.conf``:: + + <VirtualHost *:80> + ServerName localhost + DocumentRoot /var/www/html + + ErrorLog /var/log/httpd/rgw_error.log + CustomLog /var/log/httpd/rgw_access.log combined + + # LogLevel debug + + RewriteEngine On + + RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization},L] + + SetEnv proxy-nokeepalive 1 + + ProxyPass / fcgi://localhost:9000/ + + </VirtualHost> + +#. For distros with Apache 2.4.9 or later that support Unix Domain Socket, + append the following configuration to ``/etc/ceph/ceph.conf``:: + + [client.radosgw.gateway] + host = {hostname} + keyring = /etc/ceph/ceph.client.radosgw.keyring + rgw socket path = /var/run/ceph/ceph.radosgw.gateway.fastcgi.sock + log file = /var/log/ceph/client.radosgw.gateway.log + rgw print continue = false + +#. Add the following content in the gateway configuration file: + + For CentOS/RHEL add in ``/etc/httpd/conf.d/rgw.conf``:: + + <VirtualHost *:80> + ServerName localhost + DocumentRoot /var/www/html + + ErrorLog /var/log/httpd/rgw_error.log + CustomLog /var/log/httpd/rgw_access.log combined + + # LogLevel debug + + RewriteEngine On + + RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization},L] + + SetEnv proxy-nokeepalive 1 + + ProxyPass / unix:///var/run/ceph/ceph.radosgw.gateway.fastcgi.sock|fcgi://localhost:9000/ + + </VirtualHost> + + Please note, ``Apache 2.4.7`` does not have Unix Domain Socket support in + it and as such it has to be configured with localhost tcp. The Unix Domain + Socket support is available in ``Apache 2.4.9`` and later versions. + +#. Generate a key for radosgw to use for authentication with the cluster. :: + + ceph-authtool -C -n client.radosgw.gateway --gen-key /etc/ceph/keyring.radosgw.gateway + ceph-authtool -n client.radosgw.gateway --cap mon 'allow rw' --cap osd 'allow rwx' /etc/ceph/keyring.radosgw.gateway + +#. Add the key to the auth entries. :: + + ceph auth add client.radosgw.gateway --in-file=keyring.radosgw.gateway + +#. Start Apache and radosgw. + + Debian/Ubuntu:: + + sudo /etc/init.d/apache2 start + sudo /etc/init.d/radosgw start + + CentOS/RHEL:: + + sudo apachectl start + sudo /etc/init.d/ceph-radosgw start + +Usage Logging +============= + +:program:`radosgw` maintains an asynchronous usage log. It accumulates +statistics about user operations and flushes it periodically. The +logs can be accessed and managed through :program:`radosgw-admin`. + +The information that is being logged contains total data transfer, +total operations, and total successful operations. The data is being +accounted in an hourly resolution under the bucket owner, unless the +operation was done on the service (e.g., when listing a bucket) in +which case it is accounted under the operating user. + +Following is an example configuration:: + + [client.radosgw.gateway] + rgw enable usage log = true + rgw usage log tick interval = 30 + rgw usage log flush threshold = 1024 + rgw usage max shards = 32 + rgw usage max user shards = 1 + + +The total number of shards determines how many total objects hold the +usage log information. The per-user number of shards specify how many +objects hold usage information for a single user. The tick interval +configures the number of seconds between log flushes, and the flush +threshold specify how many entries can be kept before resorting to +synchronous flush. + + +Availability +============ + +:program:`radosgw` is part of Ceph, a massively scalable, open-source, distributed +storage system. Please refer to the Ceph documentation at http://ceph.com/docs for +more information. + + +See also +======== + +:doc:`ceph <ceph>`\(8) +:doc:`radosgw-admin <radosgw-admin>`\(8) diff --git a/doc/man/8/rbd-fuse.rst b/doc/man/8/rbd-fuse.rst new file mode 100644 index 00000000..394bdba7 --- /dev/null +++ b/doc/man/8/rbd-fuse.rst @@ -0,0 +1,56 @@ +:orphan: + +======================================= + rbd-fuse -- expose rbd images as files +======================================= + +.. program:: rbd-fuse + +Synopsis +======== + +| **rbd-fuse** [ -p pool ] [-c conffile] *mountpoint* [ *fuse options* ] + + +Description +=========== + +**rbd-fuse** is a FUSE (File system in USErspace) client for RADOS +block device (rbd) images. Given a pool containing rbd images, +it will mount a userspace filesystem allowing access to those images +as regular files at **mountpoint**. + +The file system can be unmounted with:: + + fusermount -u mountpoint + +or by sending ``SIGINT`` to the ``rbd-fuse`` process. + + +Options +======= + +Any options not recognized by rbd-fuse will be passed on to libfuse. + +.. option:: -c ceph.conf + + Use *ceph.conf* configuration file instead of the default + ``/etc/ceph/ceph.conf`` to determine monitor addresses during startup. + +.. option:: -p pool + + Use *pool* as the pool to search for rbd images. Default is ``rbd``. + + +Availability +============ + +**rbd-fuse** is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer to +the Ceph documentation at http://ceph.com/docs for more information. + + +See also +======== + +fusermount(8), +:doc:`rbd <rbd>`\(8) diff --git a/doc/man/8/rbd-ggate.rst b/doc/man/8/rbd-ggate.rst new file mode 100644 index 00000000..67d0c81e --- /dev/null +++ b/doc/man/8/rbd-ggate.rst @@ -0,0 +1,79 @@ +:orphan: + +================================================== + rbd-ggate -- map rbd images via FreeBSD GEOM Gate +================================================== + +.. program:: rbd-ggate + +Synopsis +======== + +| **rbd-ggate** [--read-only] [--exclusive] [--device *ggate device*] map *image-spec* | *snap-spec* +| **rbd-ggate** unmap *ggate device* +| **rbd-ggate** list + +Description +=========== + +**rbd-ggate** is a client for RADOS block device (rbd) images. It will +map a rbd image to a ggate (FreeBSD GEOM Gate class) device, allowing +access it as regular local block device. + +Commands +======== + +map +--- + +Spawn a process responsible for the creation of ggate device and +forwarding I/O requests between the GEOM Gate kernel subsystem and +RADOS. + +unmap +----- + +Destroy ggate device and terminate the process responsible for it. + +list +---- + +List mapped ggate devices. + +Options +======= + +.. option:: --device *ggate device* + + Specify ggate device path. + +.. option:: --read-only + + Map read-only. + +.. option:: --exclusive + + Forbid writes by other clients. + +Image and snap specs +==================== + +| *image-spec* is [*pool-name*]/*image-name* +| *snap-spec* is [*pool-name*]/*image-name*\ @\ *snap-name* + +The default for *pool-name* is "rbd". If an image name contains a slash +character ('/'), *pool-name* is required. + +Availability +============ + +**rbd-ggate** is part of Ceph, a massively scalable, open-source, +distributed storage system. Please refer to the Ceph documentation at +http://ceph.com/docs for more information. + + +See also +======== + +:doc:`rbd <rbd>`\(8) +:doc:`ceph <ceph>`\(8) diff --git a/doc/man/8/rbd-mirror.rst b/doc/man/8/rbd-mirror.rst new file mode 100644 index 00000000..b35787fb --- /dev/null +++ b/doc/man/8/rbd-mirror.rst @@ -0,0 +1,75 @@ +:orphan: + +=================================================== + rbd-mirror -- Ceph daemon for mirroring RBD images +=================================================== + +.. program:: rbd-mirror + +Synopsis +======== + +| **rbd-mirror** + + +Description +=========== + +:program:`rbd-mirror` is a daemon for asynchronous mirroring of RADOS +block device (rbd) images among Ceph clusters. It replays changes to +images in remote clusters in a local cluster, for disaster recovery. + +It connects to remote clusters via the RADOS protocol, relying on +default search paths to find ceph.conf files, monitor addresses and +authentication information for them, i.e. ``/etc/ceph/$cluster.conf``, +``/etc/ceph/$cluster.keyring``, and +``/etc/ceph/$cluster.$name.keyring``, where ``$cluster`` is the +human-friendly name of the cluster, and ``$name`` is the rados user to +connect as, e.g. ``client.rbd-mirror``. + + +Options +======= + +.. option:: -c ceph.conf, --conf=ceph.conf + + Use ``ceph.conf`` configuration file instead of the default + ``/etc/ceph/ceph.conf`` to determine monitor addresses during startup. + +.. option:: -m monaddress[:port] + + Connect to specified monitor (instead of looking through ``ceph.conf``). + +.. option:: -i ID, --id ID + + Set the ID portion of name for rbd-mirror + +.. option:: -n TYPE.ID, --name TYPE.ID + + Set the rados user name for the gateway (eg. client.rbd-mirror) + +.. option:: --cluster NAME + + Set the cluster name (default: ceph) + +.. option:: -d + + Run in foreground, log to stderr + +.. option:: -f + + Run in foreground, log to usual location + + +Availability +============ + +:program:`rbd-mirror` is part of Ceph, a massively scalable, open-source, distributed +storage system. Please refer to the Ceph documentation at http://ceph.com/docs for +more information. + + +See also +======== + +:doc:`rbd <rbd>`\(8) diff --git a/doc/man/8/rbd-nbd.rst b/doc/man/8/rbd-nbd.rst new file mode 100644 index 00000000..df278a70 --- /dev/null +++ b/doc/man/8/rbd-nbd.rst @@ -0,0 +1,72 @@ +:orphan: + +========================================= + rbd-nbd -- map rbd images to nbd device +========================================= + +.. program:: rbd-nbd + +Synopsis +======== + +| **rbd-nbd** [-c conf] [--read-only] [--device *nbd device*] [--nbds_max *limit*] [--max_part *limit*] [--exclusive] [--timeout *seconds*] map *image-spec* | *snap-spec* +| **rbd-nbd** unmap *nbd device* +| **rbd-nbd** list-mapped + +Description +=========== + +**rbd-nbd** is a client for RADOS block device (rbd) images like rbd kernel module. +It will map a rbd image to a nbd (Network Block Device) device, allowing access it +as regular local block device. + +Options +======= + +.. option:: -c ceph.conf + + Use *ceph.conf* configuration file instead of the default + ``/etc/ceph/ceph.conf`` to determine monitor addresses during startup. + +.. option:: --read-only + + Map read-only. + +.. option:: --nbds_max *limit* + + Override the parameter of NBD kernel module when modprobe, used to + limit the count of nbd device. + +.. option:: --max_part *limit* + + Override for module param nbds_max. + +.. option:: --exclusive + + Forbid writes by other clients. + +.. option:: --timeout *seconds* + + Override device timeout. Linux kernel will default to a 30 second request timeout. + Allow the user to optionally specify an alternate timeout. + +Image and snap specs +==================== + +| *image-spec* is [*pool-name*]/*image-name* +| *snap-spec* is [*pool-name*]/*image-name*\ @\ *snap-name* + +The default for *pool-name* is "rbd". If an image name contains a slash +character ('/'), *pool-name* is required. + +Availability +============ + +**rbd-nbd** is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer to +the Ceph documentation at http://ceph.com/docs for more information. + + +See also +======== + +:doc:`rbd <rbd>`\(8) diff --git a/doc/man/8/rbd-replay-many.rst b/doc/man/8/rbd-replay-many.rst new file mode 100644 index 00000000..5fb93498 --- /dev/null +++ b/doc/man/8/rbd-replay-many.rst @@ -0,0 +1,73 @@ +:orphan: + +================================================================================== + rbd-replay-many -- replay a rados block device (RBD) workload on several clients +================================================================================== + +.. program:: rbd-replay-many + +Synopsis +======== + +| **rbd-replay-many** [ *options* ] --original-image *name* *host1* [ *host2* [ ... ] ] -- *rbd_replay_args* + + +Description +=========== + +**rbd-replay-many** is a utility for replaying a rados block device (RBD) workload on several clients. +Although all clients use the same workload, they replay against separate images. +This matches normal use of librbd, where each original client is a VM with its own image. + +Configuration and replay files are not automatically copied to clients. +Replay images must already exist. + + +Options +======= + +.. option:: --original-image name + + Specifies the name (and snap) of the originally traced image. + Necessary for correct name mapping. + +.. option:: --image-prefix prefix + + Prefix of image names to replay against. + Specifying --image-prefix=foo results in clients replaying against foo-0, foo-1, etc. + Defaults to the original image name. + +.. option:: --exec program + + Path to the rbd-replay executable. + +.. option:: --delay seconds + + Delay between starting each client. Defaults to 0. + + +Examples +======== + +Typical usage:: + + rbd-replay-many host-0 host-1 --original-image=image -- -c ceph.conf replay.bin + +This results in the following commands being executed:: + + ssh host-0 'rbd-replay' --map-image 'image=image-0' -c ceph.conf replay.bin + ssh host-1 'rbd-replay' --map-image 'image=image-1' -c ceph.conf replay.bin + + +Availability +============ + +**rbd-replay-many** is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer to +the Ceph documentation at http://ceph.com/docs for more information. + + +See also +======== + +:doc:`rbd-replay <rbd-replay>`\(8), +:doc:`rbd <rbd>`\(8) diff --git a/doc/man/8/rbd-replay-prep.rst b/doc/man/8/rbd-replay-prep.rst new file mode 100644 index 00000000..abb08dec --- /dev/null +++ b/doc/man/8/rbd-replay-prep.rst @@ -0,0 +1,55 @@ +:orphan: + +==================================================================================== + rbd-replay-prep -- prepare captured rados block device (RBD) workloads for replay +==================================================================================== + +.. program:: rbd-replay-prep + +Synopsis +======== + +| **rbd-replay-prep** [ --window *seconds* ] [ --anonymize ] *trace_dir* *replay_file* + + +Description +=========== + +**rbd-replay-prep** processes raw rados block device (RBD) traces to prepare them for **rbd-replay**. + + +Options +======= + +.. option:: --window seconds + + Requests further apart than 'seconds' seconds are assumed to be independent. + +.. option:: --anonymize + + Anonymizes image and snap names. + +.. option:: --verbose + + Print all processed events to console + +Examples +======== + +To prepare workload1-trace for replay:: + + rbd-replay-prep workload1-trace/ust/uid/1000/64-bit workload1 + + +Availability +============ + +**rbd-replay-prep** is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer to +the Ceph documentation at http://ceph.com/docs for more information. + + +See also +======== + +:doc:`rbd-replay <rbd-replay>`\(8), +:doc:`rbd <rbd>`\(8) diff --git a/doc/man/8/rbd-replay.rst b/doc/man/8/rbd-replay.rst new file mode 100644 index 00000000..74b8018f --- /dev/null +++ b/doc/man/8/rbd-replay.rst @@ -0,0 +1,78 @@ +:orphan: + +========================================================= + rbd-replay -- replay rados block device (RBD) workloads +========================================================= + +.. program:: rbd-replay + +Synopsis +======== + +| **rbd-replay** [ *options* ] *replay_file* + + +Description +=========== + +**rbd-replay** is a utility for replaying rados block device (RBD) workloads. + + +Options +======= + +.. option:: -c ceph.conf, --conf ceph.conf + + Use ceph.conf configuration file instead of the default /etc/ceph/ceph.conf to + determine monitor addresses during startup. + +.. option:: -p pool, --pool pool + + Interact with the given pool. Defaults to 'rbd'. + +.. option:: --latency-multiplier + + Multiplies inter-request latencies. Default: 1. + +.. option:: --read-only + + Only replay non-destructive requests. + +.. option:: --map-image rule + + Add a rule to map image names in the trace to image names in the replay cluster. + A rule of image1@snap1=image2@snap2 would map snap1 of image1 to snap2 of image2. + +.. option:: --dump-perf-counters + + **Experimental** + Dump performance counters to standard out before an image is closed. + Performance counters may be dumped multiple times if multiple images are closed, + or if the same image is opened and closed multiple times. + Performance counters and their meaning may change between versions. + + +Examples +======== + +To replay workload1 as fast as possible:: + + rbd-replay --latency-multiplier=0 workload1 + +To replay workload1 but use test_image instead of prod_image:: + + rbd-replay --map-image=prod_image=test_image workload1 + + +Availability +============ + +**rbd-replay** is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer to +the Ceph documentation at http://ceph.com/docs for more information. + + +See also +======== + +:doc:`rbd-replay-prep <rbd-replay-prep>`\(8), +:doc:`rbd <rbd>`\(8) diff --git a/doc/man/8/rbd.rst b/doc/man/8/rbd.rst new file mode 100644 index 00000000..14a6ad64 --- /dev/null +++ b/doc/man/8/rbd.rst @@ -0,0 +1,919 @@ +:orphan: + +=============================================== + rbd -- manage rados block device (RBD) images +=============================================== + +.. program:: rbd + +Synopsis +======== + +| **rbd** [ -c *ceph.conf* ] [ -m *monaddr* ] [--cluster *cluster-name*] + [ -p | --pool *pool* ] [ *command* ... ] + + +Description +=========== + +**rbd** is a utility for manipulating rados block device (RBD) images, +used by the Linux rbd driver and the rbd storage driver for QEMU/KVM. +RBD images are simple block devices that are striped over objects and +stored in a RADOS object store. The size of the objects the image is +striped over must be a power of two. + + +Options +======= + +.. option:: -c ceph.conf, --conf ceph.conf + + Use ceph.conf configuration file instead of the default /etc/ceph/ceph.conf to + determine monitor addresses during startup. + +.. option:: -m monaddress[:port] + + Connect to specified monitor (instead of looking through ceph.conf). + +.. option:: --cluster cluster-name + + Use different cluster name as compared to default cluster name *ceph*. + +.. option:: -p pool-name, --pool pool-name + + Interact with the given pool. Required by most commands. + +.. option:: --namespace namespace-name + + Use a pre-defined image namespace within a pool + +.. option:: --no-progress + + Do not output progress information (goes to standard error by + default for some commands). + + +Parameters +========== + +.. option:: --image-format format-id + + Specifies which object layout to use. The default is 2. + + * format 1 - (deprecated) Use the original format for a new rbd image. This + format is understood by all versions of librbd and the kernel rbd module, + but does not support newer features like cloning. + + * format 2 - Use the second rbd format, which is supported by + librbd and kernel since version 3.11 (except for striping). This adds + support for cloning and is more easily extensible to allow more + features in the future. + +.. option:: -s size-in-M/G/T, --size size-in-M/G/T + + Specifies the size of the new rbd image or the new size of the existing rbd + image in M/G/T. If no suffix is given, unit M is assumed. + +.. option:: --object-size size-in-B/K/M + + Specifies the object size in B/K/M. Object size will be rounded up the + nearest power of two; if no suffix is given, unit B is assumed. The default + object size is 4M, smallest is 4K and maximum is 32M. + +.. option:: --stripe-unit size-in-B/K/M + + Specifies the stripe unit size in B/K/M. If no suffix is given, unit B is + assumed. See striping section (below) for more details. + +.. option:: --stripe-count num + + Specifies the number of objects to stripe over before looping back + to the first object. See striping section (below) for more details. + +.. option:: --snap snap + + Specifies the snapshot name for the specific operation. + +.. option:: --id username + + Specifies the username (without the ``client.`` prefix) to use with the map command. + +.. option:: --keyring filename + + Specifies a keyring file containing a secret for the specified user + to use with the map command. If not specified, the default keyring + locations will be searched. + +.. option:: --keyfile filename + + Specifies a file containing the secret key of ``--id user`` to use with the map command. + This option is overridden by ``--keyring`` if the latter is also specified. + +.. option:: --shared lock-tag + + Option for `lock add` that allows multiple clients to lock the + same image if they use the same tag. The tag is an arbitrary + string. This is useful for situations where an image must + be open from more than one client at once, like during + live migration of a virtual machine, or for use underneath + a clustered filesystem. + +.. option:: --format format + + Specifies output formatting (default: plain, json, xml) + +.. option:: --pretty-format + + Make json or xml formatted output more human-readable. + +.. option:: -o krbd-options, --options krbd-options + + Specifies which options to use when mapping or unmapping an image via the + rbd kernel driver. krbd-options is a comma-separated list of options + (similar to mount(8) mount options). See kernel rbd (krbd) options section + below for more details. + +.. option:: --read-only + + Map the image read-only. Equivalent to -o ro. + +.. option:: --image-feature feature-name + + Specifies which RBD format 2 feature should be enabled when creating + an image. Multiple features can be enabled by repeating this option + multiple times. The following features are supported: + + * layering: layering support + * striping: striping v2 support + * exclusive-lock: exclusive locking support + * object-map: object map support (requires exclusive-lock) + * fast-diff: fast diff calculations (requires object-map) + * deep-flatten: snapshot flatten support + * journaling: journaled IO support (requires exclusive-lock) + * data-pool: erasure coded pool support + +.. option:: --image-shared + + Specifies that the image will be used concurrently by multiple clients. + This will disable features that are dependent upon exclusive ownership + of the image. + +.. option:: --whole-object + + Specifies that the diff should be limited to the extents of a full object + instead of showing intra-object deltas. When the object map feature is + enabled on an image, limiting the diff to the object extents will + dramatically improve performance since the differences can be computed + by examining the in-memory object map instead of querying RADOS for each + object within the image. + +.. option:: --limit + + Specifies the limit for the number of snapshots permitted. + +Commands +======== + +.. TODO rst "option" directive seems to require --foo style options, parsing breaks on subcommands.. the args show up as bold too + +:command:`bench` --io-type <read | write | readwrite | rw> [--io-size *size-in-B/K/M/G/T*] [--io-threads *num-ios-in-flight*] [--io-total *size-in-B/K/M/G/T*] [--io-pattern seq | rand] [--rw-mix-read *read proportion in readwrite*] *image-spec* + Generate a series of IOs to the image and measure the IO throughput and + latency. If no suffix is given, unit B is assumed for both --io-size and + --io-total. Defaults are: --io-size 4096, --io-threads 16, --io-total 1G, + --io-pattern seq, --rw-mix-read 50. + +:command:`children` *snap-spec* + List the clones of the image at the given snapshot. This checks + every pool, and outputs the resulting poolname/imagename. + + This requires image format 2. + +:command:`clone` [--object-size *size-in-B/K/M*] [--stripe-unit *size-in-B/K/M* --stripe-count *num*] [--image-feature *feature-name*] [--image-shared] *parent-snap-spec* *child-image-spec* + Will create a clone (copy-on-write child) of the parent snapshot. + Object size will be identical to that of the parent image unless + specified. Size will be the same as the parent snapshot. The --stripe-unit + and --stripe-count arguments are optional, but must be used together. + + The parent snapshot must be protected (see `rbd snap protect`). + This requires image format 2. + +:command:`config global get` *config-entity* *key* + Get a global-level configuration override. + +:command:`config global list` [--format plain | json | xml] [--pretty-format] *config-entity* + List global-level configuration overrides. + +:command:`config global set` *config-entity* *key* *value* + Set a global-level configuration override. + +:command:`config global remove` *config-entity* *key* + Remove a global-level configuration override. + +:command:`config image get` *image-spec* *key* + Get an image-level configuration override. + +:command:`config image list` [--format plain | json | xml] [--pretty-format] *image-spec* + List image-level configuration overrides. + +:command:`config image set` *image-spec* *key* *value* + Set an image-level configuration override. + +:command:`config image remove` *image-spec* *key* + Remove an image-level configuration override. + +:command:`config pool get` *pool-name* *key* + Get a pool-level configuration override. + +:command:`config pool list` [--format plain | json | xml] [--pretty-format] *pool-name* + List pool-level configuration overrides. + +:command:`config pool set` *pool-name* *key* *value* + Set a pool-level configuration override. + +:command:`config pool remove` *pool-name* *key* + Remove a pool-level configuration override. + +:command:`cp` (*src-image-spec* | *src-snap-spec*) *dest-image-spec* + Copy the content of a src-image into the newly created dest-image. + dest-image will have the same size, object size, and image format as src-image. + +:command:`create` (-s | --size *size-in-M/G/T*) [--image-format *format-id*] [--object-size *size-in-B/K/M*] [--stripe-unit *size-in-B/K/M* --stripe-count *num*] [--thick-provision] [--no-progress] [--image-feature *feature-name*]... [--image-shared] *image-spec* + Will create a new rbd image. You must also specify the size via --size. The + --stripe-unit and --stripe-count arguments are optional, but must be used together. + If the --thick-provision is enabled, it will fully allocate storage for + the image at creation time. It will take a long time to do. + Note: thick provisioning requires zeroing the contents of the entire image. + +:command:`deep cp` (*src-image-spec* | *src-snap-spec*) *dest-image-spec* + Deep copy the content of a src-image into the newly created dest-image. + Dest-image will have the same size, object size, image format, and snapshots as src-image. + +:command:`device list` [-t | --device-type *device-type*] [--format plain | json | xml] --pretty-format + Show the rbd images that are mapped via the rbd kernel module + (default) or other supported device. + +:command:`device map` [-t | --device-type *device-type*] [--read-only] [--exclusive] [-o | --options *device-options*] *image-spec* | *snap-spec* + Map the specified image to a block device via the rbd kernel module + (default) or other supported device (*nbd* on Linux or *ggate* on + FreeBSD). + + The --options argument is a comma separated list of device type + specific options (opt1,opt2=val,...). + +:command:`device unmap` [-t | --device-type *device-type*] [-o | --options *device-options*] *image-spec* | *snap-spec* | *device-path* + Unmap the block device that was mapped via the rbd kernel module + (default) or other supported device. + + The --options argument is a comma separated list of device type + specific options (opt1,opt2=val,...). + +:command:`diff` [--from-snap *snap-name*] [--whole-object] *image-spec* | *snap-spec* + Dump a list of byte extents in the image that have changed since the specified start + snapshot, or since the image was created. Each output line includes the starting offset + (in bytes), the length of the region (in bytes), and either 'zero' or 'data' to indicate + whether the region is known to be zeros or may contain other data. + +:command:`du` [-p | --pool *pool-name*] [*image-spec* | *snap-spec*] + Will calculate the provisioned and actual disk usage of all images and + associated snapshots within the specified pool. It can also be used against + individual images and snapshots. + + If the RBD fast-diff feature is not enabled on images, this operation will + require querying the OSDs for every potential object within the image. + +:command:`export` [--export-format *format (1 or 2)*] (*image-spec* | *snap-spec*) [*dest-path*] + Export image to dest path (use - for stdout). + The --export-format accepts '1' or '2' currently. Format 2 allow us to export not only the content + of image, but also the snapshots and other properties, such as image_order, features. + +:command:`export-diff` [--from-snap *snap-name*] [--whole-object] (*image-spec* | *snap-spec*) *dest-path* + Export an incremental diff for an image to dest path (use - for stdout). If + an initial snapshot is specified, only changes since that snapshot are included; otherwise, + any regions of the image that contain data are included. The end snapshot is specified + using the standard --snap option or @snap syntax (see below). The image diff format includes + metadata about image size changes, and the start and end snapshots. It efficiently represents + discarded or 'zero' regions of the image. + +:command:`feature disable` *image-spec* *feature-name*... + Disable the specified feature on the specified image. Multiple features can + be specified. + +:command:`feature enable` *image-spec* *feature-name*... + Enable the specified feature on the specified image. Multiple features can + be specified. + +:command:`flatten` *image-spec* + If image is a clone, copy all shared blocks from the parent snapshot and + make the child independent of the parent, severing the link between + parent snap and child. The parent snapshot can be unprotected and + deleted if it has no further dependent clones. + + This requires image format 2. + +:command:`group create` *group-spec* + Create a group. + +:command:`group image add` *group-spec* *image-spec* + Add an image to a group. + +:command:`group image list` *group-spec* + List images in a group. + +:command:`group image remove` *group-spec* *image-spec* + Remove an image from a group. + +:command:`group ls` [-p | --pool *pool-name*] + List rbd groups. + +:command:`group rename` *src-group-spec* *dest-group-spec* + Rename a group. Note: rename across pools is not supported. + +:command:`group rm` *group-spec* + Delete a group. + +:command:`group snap create` *group-snap-spec* + Make a snapshot of a group. + +:command:`group snap list` *group-spec* + List snapshots of a group. + +:command:`group snap rm` *group-snap-spec* + Remove a snapshot from a group. + +:command:`group snap rename` *group-snap-spec* *snap-name* + Rename group's snapshot. + +:command:`group snap rollback` *group-snap-spec* + Rollback group to snapshot. + +:command:`image-meta get` *image-spec* *key* + Get metadata value with the key. + +:command:`image-meta list` *image-spec* + Show metadata held on the image. The first column is the key + and the second column is the value. + +:command:`image-meta remove` *image-spec* *key* + Remove metadata key with the value. + +:command:`image-meta set` *image-spec* *key* *value* + Set metadata key with the value. They will displayed in `image-meta list`. + +:command:`import` [--export-format *format (1 or 2)*] [--image-format *format-id*] [--object-size *size-in-B/K/M*] [--stripe-unit *size-in-B/K/M* --stripe-count *num*] [--image-feature *feature-name*]... [--image-shared] *src-path* [*image-spec*] + Create a new image and imports its data from path (use - for + stdin). The import operation will try to create sparse rbd images + if possible. For import from stdin, the sparsification unit is + the data block size of the destination image (object size). + + The --stripe-unit and --stripe-count arguments are optional, but must be + used together. + + The --export-format accepts '1' or '2' currently. Format 2 allow us to import not only the content + of image, but also the snapshots and other properties, such as image_order, features. + +:command:`import-diff` *src-path* *image-spec* + Import an incremental diff of an image and applies it to the current image. If the diff + was generated relative to a start snapshot, we verify that snapshot already exists before + continuing. If there was an end snapshot we verify it does not already exist before + applying the changes, and create the snapshot when we are done. + +:command:`info` *image-spec* | *snap-spec* + Will dump information (such as size and object size) about a specific rbd image. + If image is a clone, information about its parent is also displayed. + If a snapshot is specified, whether it is protected is shown as well. + +:command:`journal client disconnect` *journal-spec* + Flag image journal client as disconnected. + +:command:`journal export` [--verbose] [--no-error] *src-journal-spec* *path-name* + Export image journal to path (use - for stdout). It can be make a backup + of the image journal especially before attempting dangerous operations. + + Note that this command may not always work if the journal is badly corrupted. + +:command:`journal import` [--verbose] [--no-error] *path-name* *dest-journal-spec* + Import image journal from path (use - for stdin). + +:command:`journal info` *journal-spec* + Show information about image journal. + +:command:`journal inspect` [--verbose] *journal-spec* + Inspect and report image journal for structural errors. + +:command:`journal reset` *journal-spec* + Reset image journal. + +:command:`journal status` *journal-spec* + Show status of image journal. + +:command:`lock add` [--shared *lock-tag*] *image-spec* *lock-id* + Lock an image. The lock-id is an arbitrary name for the user's + convenience. By default, this is an exclusive lock, meaning it + will fail if the image is already locked. The --shared option + changes this behavior. Note that locking does not affect + any operation other than adding a lock. It does not + protect an image from being deleted. + +:command:`lock ls` *image-spec* + Show locks held on the image. The first column is the locker + to use with the `lock remove` command. + +:command:`lock rm` *image-spec* *lock-id* *locker* + Release a lock on an image. The lock id and locker are + as output by lock ls. + +:command:`ls` [-l | --long] [*pool-name*] + Will list all rbd images listed in the rbd_directory object. With + -l, also show snapshots, and use longer-format output including + size, parent (if clone), format, etc. + +:command:`merge-diff` *first-diff-path* *second-diff-path* *merged-diff-path* + Merge two continuous incremental diffs of an image into one single diff. The + first diff's end snapshot must be equal with the second diff's start snapshot. + The first diff could be - for stdin, and merged diff could be - for stdout, which + enables multiple diff files to be merged using something like + 'rbd merge-diff first second - | rbd merge-diff - third result'. Note this command + currently only support the source incremental diff with stripe_count == 1 + +:command:`migration abort` *image-spec* + Cancel image migration. This step may be run after successful or + failed migration prepare or migration execute steps and returns the + image to its initial (before migration) state. All modifications to + the destination image are lost. + +:command:`migration commit` *image-spec* + Commit image migration. This step is run after a successful migration + prepare and migration execute steps and removes the source image data. + +:command:`migration execute` *image-spec* + Execute image migration. This step is run after a successful migration + prepare step and copies image data to the destination. + +:command:`migration prepare` [--order *order*] [--object-size *object-size*] [--image-feature *image-feature*] [--image-shared] [--stripe-unit *stripe-unit*] [--stripe-count *stripe-count*] [--data-pool *data-pool*] *src-image-spec* [*dest-image-spec*] + Prepare image migration. This is the first step when migrating an + image, i.e. changing the image location, format or other + parameters that can't be changed dynamically. The destination can + match the source, and in this case *dest-image-spec* can be omitted. + After this step the source image is set as a parent of the + destination image, and the image is accessible in copy-on-write mode + by its destination spec. + +:command:`mirror image demote` *image-spec* + Demote a primary image to non-primary for RBD mirroring. + +:command:`mirror image disable` [--force] *image-spec* + Disable RBD mirroring for an image. If the mirroring is + configured in ``image`` mode for the image's pool, then it + can be explicitly disabled mirroring for each image within + the pool. + +:command:`mirror image enable` *image-spec* + Enable RBD mirroring for an image. If the mirroring is + configured in ``image`` mode for the image's pool, then it + can be explicitly enabled mirroring for each image within + the pool. + + This requires the RBD journaling feature is enabled. + +:command:`mirror image promote` [--force] *image-spec* + Promote a non-primary image to primary for RBD mirroring. + +:command:`mirror image resync` *image-spec* + Force resync to primary image for RBD mirroring. + +:command:`mirror image status` *image-spec* + Show RBD mirroring status for an image. + +:command:`mirror pool demote` [*pool-name*] + Demote all primary images within a pool to non-primary. + Every mirroring enabled image will demoted in the pool. + +:command:`mirror pool disable` [*pool-name*] + Disable RBD mirroring by default within a pool. When mirroring + is disabled on a pool in this way, mirroring will also be + disabled on any images (within the pool) for which mirroring + was enabled explicitly. + +:command:`mirror pool enable` [*pool-name*] *mode* + Enable RBD mirroring by default within a pool. + The mirroring mode can either be ``pool`` or ``image``. + If configured in ``pool`` mode, all images in the pool + with the journaling feature enabled are mirrored. + If configured in ``image`` mode, mirroring needs to be + explicitly enabled (by ``mirror image enable`` command) + on each image. + +:command:`mirror pool info` [*pool-name*] + Show information about the pool mirroring configuration. + It includes mirroring mode, peer UUID, remote cluster name, + and remote client name. + +:command:`mirror pool peer add` [*pool-name*] *remote-cluster-spec* + Add a mirroring peer to a pool. + *remote-cluster-spec* is [*remote client name*\ @\ ]\ *remote cluster name*. + + The default for *remote client name* is "client.admin". + + This requires mirroring mode is enabled. + +:command:`mirror pool peer remove` [*pool-name*] *uuid* + Remove a mirroring peer from a pool. The peer uuid is available + from ``mirror pool info`` command. + +:command:`mirror pool peer set` [*pool-name*] *uuid* *key* *value* + Update mirroring peer settings. + The key can be either ``client`` or ``cluster``, and the value + is corresponding to remote client name or remote cluster name. + +:command:`mirror pool promote` [--force] [*pool-name*] + Promote all non-primary images within a pool to primary. + Every mirroring enabled image will promoted in the pool. + +:command:`mirror pool status` [--verbose] [*pool-name*] + Show status for all mirrored images in the pool. + With --verbose, also show additionally output status + details for every mirroring image in the pool. + +:command:`mv` *src-image-spec* *dest-image-spec* + Rename an image. Note: rename across pools is not supported. + +:command:`namespace create` *pool-name*/*namespace-name* + Create a new image namespace within the pool. + +:command:`namespace list` *pool-name* + List image namespaces defined within the pool. + +:command:`namespace remove` *pool-name*/*namespace-name* + Remove an empty image namespace from the pool. + +:command:`object-map check` *image-spec* | *snap-spec* + Verify the object map is correct. + +:command:`object-map rebuild` *image-spec* | *snap-spec* + Rebuild an invalid object map for the specified image. An image snapshot can be + specified to rebuild an invalid object map for a snapshot. + +:command:`pool init` [*pool-name*] [--force] + Initialize pool for use by RBD. Newly created pools must initialized + prior to use. + +:command:`resize` (-s | --size *size-in-M/G/T*) [--allow-shrink] *image-spec* + Resize rbd image. The size parameter also needs to be specified. + The --allow-shrink option lets the size be reduced. + +:command:`rm` *image-spec* + Delete an rbd image (including all data blocks). If the image has + snapshots, this fails and nothing is deleted. + +:command:`snap create` *snap-spec* + Create a new snapshot. Requires the snapshot name parameter specified. + +:command:`snap limit clear` *image-spec* + Remove any previously set limit on the number of snapshots allowed on + an image. + +:command:`snap limit set` [--limit] *limit* *image-spec* + Set a limit for the number of snapshots allowed on an image. + +:command:`snap ls` *image-spec* + Dump the list of snapshots inside a specific image. + +:command:`snap protect` *snap-spec* + Protect a snapshot from deletion, so that clones can be made of it + (see `rbd clone`). Snapshots must be protected before clones are made; + protection implies that there exist dependent cloned children that + refer to this snapshot. `rbd clone` will fail on a nonprotected + snapshot. + + This requires image format 2. + +:command:`snap purge` *image-spec* + Remove all unprotected snapshots from an image. + +:command:`snap rename` *src-snap-spec* *dest-snap-spec* + Rename a snapshot. Note: rename across pools and images is not supported. + +:command:`snap rm` [--force] *snap-spec* + Remove the specified snapshot. + +:command:`snap rollback` *snap-spec* + Rollback image content to snapshot. This will iterate through the entire blocks + array and update the data head content to the snapshotted version. + +:command:`snap unprotect` *snap-spec* + Unprotect a snapshot from deletion (undo `snap protect`). If cloned + children remain, `snap unprotect` fails. (Note that clones may exist + in different pools than the parent snapshot.) + + This requires image format 2. + +:command:`sparsify` [--sparse-size *sparse-size*] *image-spec* + Reclaim space for zeroed image extents. The default sparse size is + 4096 bytes and can be changed via --sparse-size option with the + following restrictions: it should be power of two, not less than + 4096, and not larger image object size. + +:command:`status` *image-spec* + Show the status of the image, including which clients have it open. + +:command:`trash ls` [*pool-name*] + List all entries from trash. + +:command:`trash mv` *image-spec* + Move an image to the trash. Images, even ones actively in-use by + clones, can be moved to the trash and deleted at a later time. + +:command:`trash purge` [*pool-name*] + Remove all expired images from trash. + +:command:`trash restore` *image-id* + Restore an image from trash. + +:command:`trash rm` *image-id* + Delete an image from trash. If image deferment time has not expired + you can not removed it unless use force. But an actively in-use by clones + or has snapshots can not be removed. + +:command:`watch` *image-spec* + Watch events on image. + +Image, snap, group and journal specs +==================================== + +| *image-spec* is [*pool-name*/[*namespace-name*/]]\ *image-name* +| *snap-spec* is [*pool-name*/[*namespace-name*/]]\ *image-name*\ @\ *snap-name* +| *group-spec* is [*pool-name*/[*namespace-name*/]]\ *group-name* +| *group-snap-spec* is [*pool-name*/[*namespace-name*/]]\ *group-name*\ @\ *snap-name* +| *journal-spec* is [*pool-name*/[*namespace-name*/]]\ *journal-name* + +The default for *pool-name* is "rbd" and *namespace-name* is "". If an image +name contains a slash character ('/'), *pool-name* is required. + +The *journal-name* is *image-id*. + +You may specify each name individually, using --pool, --namespace, --image, and +--snap options, but this is discouraged in favor of the above spec syntax. + +Striping +======== + +RBD images are striped over many objects, which are then stored by the +Ceph distributed object store (RADOS). As a result, read and write +requests for the image are distributed across many nodes in the +cluster, generally preventing any single node from becoming a +bottleneck when individual images get large or busy. + +The striping is controlled by three parameters: + +.. option:: object-size + + The size of objects we stripe over is a power of two. It will be rounded up the nearest power of two. + The default object size is 4 MB, smallest is 4K and maximum is 32M. + +.. option:: stripe_unit + + Each [*stripe_unit*] contiguous bytes are stored adjacently in the same object, before we move on + to the next object. + +.. option:: stripe_count + + After we write [*stripe_unit*] bytes to [*stripe_count*] objects, we loop back to the initial object + and write another stripe, until the object reaches its maximum size. At that point, + we move on to the next [*stripe_count*] objects. + +By default, [*stripe_unit*] is the same as the object size and [*stripe_count*] is 1. Specifying a different +[*stripe_unit*] requires that the STRIPINGV2 feature be supported (added in Ceph v0.53) and format 2 images be +used. + + +Kernel rbd (krbd) options +========================= + +Most of these options are useful mainly for debugging and benchmarking. The +default values are set in the kernel and may therefore depend on the version of +the running kernel. + +Per client instance `rbd device map` options: + +* fsid=aaaaaaaa-bbbb-cccc-dddd-eeeeeeeeeeee - FSID that should be assumed by + the client. + +* ip=a.b.c.d[:p] - IP and, optionally, port the client should use. + +* share - Enable sharing of client instances with other mappings (default). + +* noshare - Disable sharing of client instances with other mappings. + +* crc - Enable CRC32C checksumming for msgr1 on-the-wire protocol (default). + For msgr2.1 protocol this option is ignored: full checksumming is always on + in 'crc' mode and always off in 'secure' mode. + +* nocrc - Disable CRC32C checksumming for msgr1 on-the-wire protocol. Note + that only payload checksumming is disabled, header checksumming is always on. + For msgr2.1 protocol this option is ignored. + +* cephx_require_signatures - Require msgr1 message signing feature (since 3.19, + default). This option is deprecated and will be removed in the future as the + feature has been supported since the Bobtail release. + +* nocephx_require_signatures - Don't require msgr1 message signing feature + (since 3.19). This option is deprecated and will be removed in the future. + +* tcp_nodelay - Disable Nagle's algorithm on client sockets (since 4.0, + default). + +* notcp_nodelay - Enable Nagle's algorithm on client sockets (since 4.0). + +* cephx_sign_messages - Enable message signing for msgr1 on-the-wire protocol + (since 4.4, default). For msgr2.1 protocol this option is ignored: message + signing is built into 'secure' mode and not offered in 'crc' mode. + +* nocephx_sign_messages - Disable message signing for msgr1 on-the-wire protocol + (since 4.4). For msgr2.1 protocol this option is ignored. + +* mount_timeout=x - A timeout on various steps in `rbd device map` and + `rbd device unmap` sequences (default is 60 seconds). In particular, + since 4.2 this can be used to ensure that `rbd device unmap` eventually + times out when there is no network connection to a cluster. + +* osdkeepalive=x - OSD keepalive timeout (default is 5 seconds). + +* osd_idle_ttl=x - OSD idle TTL (default is 60 seconds). + +Per mapping (block device) `rbd device map` options: + +* rw - Map the image read-write (default). Overridden by --read-only. + +* ro - Map the image read-only. Equivalent to --read-only. + +* queue_depth=x - queue depth (since 4.2, default is 128 requests). + +* lock_on_read - Acquire exclusive lock on reads, in addition to writes and + discards (since 4.9). + +* exclusive - Disable automatic exclusive lock transitions (since 4.12). + Equivalent to --exclusive. + +* lock_timeout=x - A timeout on waiting for the acquisition of exclusive lock + (since 4.17, default is 0 seconds, meaning no timeout). + +* notrim - Turn off discard and write zeroes offload support to avoid + deprovisioning a fully provisioned image (since 4.17). When enabled, discard + requests will fail with -EOPNOTSUPP, write zeroes requests will fall back to + manually zeroing. + +* abort_on_full - Fail write requests with -ENOSPC when the cluster is full or + the data pool reaches its quota (since 5.0). The default behaviour is to + block until the full condition is cleared. + +* alloc_size - Minimum allocation unit of the underlying OSD object store + backend (since 5.1, default is 64K bytes). This is used to round off and + drop discards that are too small. For bluestore, the recommended setting is + bluestore_min_alloc_size (typically 64K for hard disk drives and 16K for + solid-state drives). For filestore with filestore_punch_hole = false, the + recommended setting is image object size (typically 4M). + +* ms_mode=legacy - Use msgr1 on-the-wire protocol (since 5.11, default). + +* ms_mode=crc - Use msgr2.1 on-the-wire protocol, select 'crc' mode, also + referred to as plain mode (since 5.11). If the daemon denies 'crc' mode, + fail the connection. + +* ms_mode=secure - Use msgr2.1 on-the-wire protocol, select 'secure' mode + (since 5.11). 'secure' mode provides full in-transit encryption ensuring + both confidentiality and authenticity. If the daemon denies 'secure' mode, + fail the connection. + +* ms_mode=prefer-crc - Use msgr2.1 on-the-wire protocol, select 'crc' + mode (since 5.11). If the daemon denies 'crc' mode in favor of 'secure' + mode, agree to 'secure' mode. + +* ms_mode=prefer-secure - Use msgr2.1 on-the-wire protocol, select 'secure' + mode (since 5.11). If the daemon denies 'secure' mode in favor of 'crc' + mode, agree to 'crc' mode. + +* udev - Wait for udev device manager to finish executing all matching + "add" rules and release the device before exiting (default). This option + is not passed to the kernel. + +* noudev - Don't wait for udev device manager. When enabled, the device may + not be fully usable immediately on exit. + +`rbd device unmap` options: + +* force - Force the unmapping of a block device that is open (since 4.9). The + driver will wait for running requests to complete and then unmap; requests + sent to the driver after initiating the unmap will be failed. + +* udev - Wait for udev device manager to finish executing all matching + "remove" rules and clean up after the device before exiting (default). + This option is not passed to the kernel. + +* noudev - Don't wait for udev device manager. + + +Examples +======== + +To create a new rbd image that is 100 GB:: + + rbd create mypool/myimage --size 102400 + +To use a non-default object size (8 MB):: + + rbd create mypool/myimage --size 102400 --object-size 8M + +To delete an rbd image (be careful!):: + + rbd rm mypool/myimage + +To create a new snapshot:: + + rbd snap create mypool/myimage@mysnap + +To create a copy-on-write clone of a protected snapshot:: + + rbd clone mypool/myimage@mysnap otherpool/cloneimage + +To see which clones of a snapshot exist:: + + rbd children mypool/myimage@mysnap + +To delete a snapshot:: + + rbd snap rm mypool/myimage@mysnap + +To map an image via the kernel with cephx enabled:: + + rbd device map mypool/myimage --id admin --keyfile secretfile + +To map an image via the kernel with different cluster name other than default *ceph*:: + + rbd device map mypool/myimage --cluster cluster-name + +To unmap an image:: + + rbd device unmap /dev/rbd0 + +To create an image and a clone from it:: + + rbd import --image-format 2 image mypool/parent + rbd snap create mypool/parent@snap + rbd snap protect mypool/parent@snap + rbd clone mypool/parent@snap otherpool/child + +To create an image with a smaller stripe_unit (to better distribute small writes in some workloads):: + + rbd create mypool/myimage --size 102400 --stripe-unit 65536B --stripe-count 16 + +To change an image from one image format to another, export it and then +import it as the desired image format:: + + rbd export mypool/myimage@snap /tmp/img + rbd import --image-format 2 /tmp/img mypool/myimage2 + +To lock an image for exclusive use:: + + rbd lock add mypool/myimage mylockid + +To release a lock:: + + rbd lock remove mypool/myimage mylockid client.2485 + +To list images from trash:: + + rbd trash ls mypool + +To defer delete an image (use *--expires-at* to set expiration time, default is now):: + + rbd trash mv mypool/myimage --expires-at "tomorrow" + +To delete an image from trash (be careful!):: + + rbd trash rm mypool/myimage-id + +To force delete an image from trash (be careful!):: + + rbd trash rm mypool/myimage-id --force + +To restore an image from trash:: + + rbd trash restore mypool/myimage-id + +To restore an image from trash and rename it:: + + rbd trash restore mypool/myimage-id --image mynewimage + + +Availability +============ + +**rbd** is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer to +the Ceph documentation at http://ceph.com/docs for more information. + + +See also +======== + +:doc:`ceph <ceph>`\(8), +:doc:`rados <rados>`\(8) diff --git a/doc/man/8/rbdmap.rst b/doc/man/8/rbdmap.rst new file mode 100644 index 00000000..e6980ab7 --- /dev/null +++ b/doc/man/8/rbdmap.rst @@ -0,0 +1,128 @@ +:orphan: + +========================================= + rbdmap -- map RBD devices at boot time +========================================= + +.. program:: rbdmap + +Synopsis +======== + +| **rbdmap map** +| **rbdmap unmap** + + +Description +=========== + +**rbdmap** is a shell script that automates ``rbd map`` and ``rbd unmap`` +operations on one or more RBD (RADOS Block Device) images. While the script can be +run manually by the system administrator at any time, the principal use case is +automatic mapping/mounting of RBD images at boot time (and unmounting/unmapping +at shutdown), as triggered by the init system (a systemd unit file, +``rbdmap.service`` is included with the ceph-common package for this purpose). + +The script takes a single argument, which can be either "map" or "unmap". +In either case, the script parses a configuration file (defaults to ``/etc/ceph/rbdmap``, +but can be overridden via an environment variable ``RBDMAPFILE``). Each line +of the configuration file corresponds to an RBD image which is to be mapped, or +unmapped. + +The configuration file format is:: + + IMAGESPEC RBDOPTS + +where ``IMAGESPEC`` should be specified as ``POOLNAME/IMAGENAME`` (the pool +name, a forward slash, and the image name), or merely ``IMAGENAME``, in which +case the ``POOLNAME`` defaults to "rbd". ``RBDOPTS`` is an optional list of +parameters to be passed to the underlying ``rbd map`` command. These parameters +and their values should be specified as a comma-separated string:: + + PARAM1=VAL1,PARAM2=VAL2,...,PARAMN=VALN + +This will cause the script to issue an ``rbd map`` command like the following:: + + rbd map POOLNAME/IMAGENAME --PARAM1 VAL1 --PARAM2 VAL2 + +(See the ``rbd`` manpage for a full list of possible options.) +For parameters and values which contain commas or equality signs, a simple +apostrophe can be used to prevent replacing them. + +When run as ``rbdmap map``, the script parses the configuration file, and for +each RBD image specified attempts to first map the image (using the ``rbd map`` +command) and, second, to mount the image. + +When run as ``rbdmap unmap``, images listed in the configuration file will +be unmounted and unmapped. + +``rbdmap unmap-all`` attempts to unmount and subsequently unmap all currently +mapped RBD images, regardless of whether or not they are listed in the +configuration file. + +If successful, the ``rbd map`` operation maps the image to a ``/dev/rbdX`` +device, at which point a udev rule is triggered to create a friendly device +name symlink, ``/dev/rbd/POOLNAME/IMAGENAME``, pointing to the real mapped +device. + +In order for mounting/unmounting to succeed, the friendly device name must +have a corresponding entry in ``/etc/fstab``. + +When writing ``/etc/fstab`` entries for RBD images, it's a good idea to specify +the "noauto" (or "nofail") mount option. This prevents the init system from +trying to mount the device too early - before the device in question even +exists. (Since ``rbdmap.service`` +executes a shell script, it is typically triggered quite late in the boot +sequence.) + + +Examples +======== + +Example ``/etc/ceph/rbdmap`` for three RBD images called "bar1", "bar2" and "bar3", +which are in pool "foopool":: + + foopool/bar1 id=admin,keyring=/etc/ceph/ceph.client.admin.keyring + foopool/bar2 id=admin,keyring=/etc/ceph/ceph.client.admin.keyring + foopool/bar3 id=admin,keyring=/etc/ceph/ceph.client.admin.keyring,options='lock_on_read,queue_depth=1024' + +Each line in the file contains two strings: the image spec and the options to +be passed to ``rbd map``. These two lines get transformed into the following +commands:: + + rbd map foopool/bar1 --id admin --keyring /etc/ceph/ceph.client.admin.keyring + rbd map foopool/bar2 --id admin --keyring /etc/ceph/ceph.client.admin.keyring + rbd map foopool/bar2 --id admin --keyring /etc/ceph/ceph.client.admin.keyring --options lock_on_read,queue_depth=1024 + +If the images had XFS filesystems on them, the corresponding ``/etc/fstab`` +entries might look like this:: + + /dev/rbd/foopool/bar1 /mnt/bar1 xfs noauto 0 0 + /dev/rbd/foopool/bar2 /mnt/bar2 xfs noauto 0 0 + /dev/rbd/foopool/bar3 /mnt/bar3 xfs noauto 0 0 + +After creating the images and populating the ``/etc/ceph/rbdmap`` file, making +the images get automatically mapped and mounted at boot is just a matter of +enabling that unit:: + + systemctl enable rbdmap.service + + +Options +======= + +None + + +Availability +============ + +**rbdmap** is part of Ceph, a massively scalable, open-source, distributed +storage system. Please refer to the Ceph documentation at +http://ceph.com/docs for more information. + + +See also +======== + +:doc:`rbd <rbd>`\(8), diff --git a/doc/man/8/rgw-orphan-list.rst b/doc/man/8/rgw-orphan-list.rst new file mode 100644 index 00000000..408242da --- /dev/null +++ b/doc/man/8/rgw-orphan-list.rst @@ -0,0 +1,69 @@ +:orphan: + +================================================================== + rgw-orphan-list -- list rados objects that are not indexed by rgw +================================================================== + +.. program:: rgw-orphan-list + +Synopsis +======== + +| **rgw-orphan-list** + +Description +=========== + +:program:`rgw-orphan-list` is an *EXPERIMENTAL* RADOS gateway user +administration utility. It produces a listing of rados objects that +are not directly or indirectly referenced through the bucket indexes +on a pool. It places the results and intermediate files on the local +filesystem rather than on the ceph cluster itself, and therefore will +not itself consume additional cluster storage. + +In theory orphans should not exist. However because ceph evolves +rapidly, bugs do crop up, and they may result in orphans that are left +behind. + +In its current form this utility does not take any command-line +arguments or options. It will list the available pools and prompt the +user to enter the pool they would like to list orphans for. + +Behind the scenes it runs `rados ls` and `radosgw-admin bucket +radoslist ...` and produces a list of those entries that appear in the +former but not the latter. Those entries are presumed to be the +orphans. + +Warnings +======== + +This utility is currently considered *EXPERIMENTAL*. + +This utility will produce false orphan entries for unindexed buckets +since such buckets have no bucket indices that can provide the +starting point for tracing. + +Options +======= + +At present there are no options. + +Examples +======== + +Launch the tool:: + + $ rgw-orphan-list + +Availability +============ + +:program:`radosgw-admin` is part of Ceph, a massively scalable, open-source, +distributed storage system. Please refer to the Ceph documentation at +http://ceph.com/docs for more information. + +See also +======== + +:doc:`radosgw-admin <radosgw-admin>`\(8) +:doc:`ceph-diff-sorted <ceph-diff-sorted>`\(8) diff --git a/doc/man/CMakeLists.txt b/doc/man/CMakeLists.txt new file mode 100644 index 00000000..e81631ba --- /dev/null +++ b/doc/man/CMakeLists.txt @@ -0,0 +1,15 @@ +set(sphinx_input) +set(sphinx_output) +set(sphinx_output_dir ${CMAKE_BINARY_DIR}/doc/man) + +add_subdirectory(8) + +add_custom_command( + OUTPUT ${sphinx_output} + COMMAND ${SPHINX_BUILD} -b man -t man -d ${CMAKE_BINARY_DIR}/doc/doctrees -c ${CMAKE_SOURCE_DIR}/man ${CMAKE_CURRENT_SOURCE_DIR} ${sphinx_output_dir} + DEPENDS ${sphinx_input}) + +add_custom_target( + manpages ALL + DEPENDS ${sphinx_output} + COMMENT "manpages building") |