1 files changed, 136 insertions, 0 deletions
diff --git a/src/spdk/dpdk/drivers/net/mlx5/mlx5_defs.h b/src/spdk/dpdk/drivers/net/mlx5/mlx5_defs.h
new file mode 100644
index 00000000..f2a16795
--- /dev/null
+++ b/src/spdk/dpdk/drivers/net/mlx5/mlx5_defs.h
@@ -0,0 +1,136 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2015 6WIND S.A.
+ * Copyright 2015 Mellanox Technologies, Ltd
+ */
+
+#ifndef RTE_PMD_MLX5_DEFS_H_
+#define RTE_PMD_MLX5_DEFS_H_
+
+#include <rte_ethdev_driver.h>
+
+#include "mlx5_autoconf.h"
+
+/* Reported driver name. */
+#define MLX5_DRIVER_NAME "net_mlx5"
+
+/* Maximum number of simultaneous unicast MAC addresses. */
+#define MLX5_MAX_UC_MAC_ADDRESSES 128
+/* Maximum number of simultaneous Multicast MAC addresses. */
+#define MLX5_MAX_MC_MAC_ADDRESSES 128
+/* Maximum number of simultaneous MAC addresses. */
+#define MLX5_MAX_MAC_ADDRESSES \
+	(MLX5_MAX_UC_MAC_ADDRESSES + MLX5_MAX_MC_MAC_ADDRESSES)
+
+/* Maximum number of simultaneous VLAN filters. */
+#define MLX5_MAX_VLAN_IDS 128
+
+/*
+ * Request TX completion every time descriptors reach this threshold since
+ * the previous request. Must be a power of two for performance reasons.
+ */
+#define MLX5_TX_COMP_THRESH 32
+
+/*
+ * Request TX completion every time the total number of WQEBBs used for inlining
+ * packets exceeds the size of WQ divided by this divisor. Better to be power of
+ * two for performance.
+ */
+#define MLX5_TX_COMP_THRESH_INLINE_DIV (1 << 3)
+
+/* Size of per-queue MR cache array for linear search. */
+#define MLX5_MR_CACHE_N 8
+
+/* Size of MR cache table for binary search. */
+#define MLX5_MR_BTREE_CACHE_N 256
+
+/*
+ * If defined, only use software counters. The PMD will never ask the hardware
+ * for these, and many of them won't be available.
+ */
+#ifndef MLX5_PMD_SOFT_COUNTERS
+#define MLX5_PMD_SOFT_COUNTERS 1
+#endif
+
+/* Alarm timeout. */
+#define MLX5_ALARM_TIMEOUT_US 100000
+
+/* Maximum number of extended statistics counters. */
+#define MLX5_MAX_XSTATS 32
+
+/* Maximum Packet headers size (L2+L3+L4) for TSO. */
+#define MLX5_MAX_TSO_HEADER 192
+
+/* Default minimum number of Tx queues for vectorized Tx. */
+#define MLX5_VPMD_MIN_TXQS 4
+
+/* Threshold of buffer replenishment for vectorized Rx. */
+#define MLX5_VPMD_RXQ_RPLNSH_THRESH(n) \
+	(RTE_MIN(MLX5_VPMD_RX_MAX_BURST, (unsigned int)(n) >> 2))
+
+/* Maximum size of burst for vectorized Rx. */
+#define MLX5_VPMD_RX_MAX_BURST 64U
+
+/*
+ * Maximum size of burst for vectorized Tx. This is related to the maximum size
+ * of Enhanced MPW (eMPW) WQE as vectorized Tx is supported with eMPW.
+ * Careful when changing, large value can cause WQE DS to overlap.
+ */
+#define MLX5_VPMD_TX_MAX_BURST        32U
+
+/* Number of packets vectorized Rx can simultaneously process in a loop. */
+#define MLX5_VPMD_DESCS_PER_LOOP      4
+
+/* Supported RSS */
+#define MLX5_RSS_HF_MASK (~(ETH_RSS_IP | ETH_RSS_UDP | ETH_RSS_TCP))
+
+/* Timeout in seconds to get a valid link status. */
+#define MLX5_LINK_STATUS_TIMEOUT 10
+
+/* Reserved address space for UAR mapping. */
+#define MLX5_UAR_SIZE (1ULL << (sizeof(uintptr_t) * 4))
+
+/* Offset of reserved UAR address space to hugepage memory. Offset is used here
+ * to minimize possibility of address next to hugepage being used by other code
+ * in either primary or secondary process, failing to map TX UAR would make TX
+ * packets invisible to HW.
+ */
+#define MLX5_UAR_OFFSET (1ULL << (sizeof(uintptr_t) * 4))
+
+/* Maximum number of UAR pages used by a port,
+ * These are the size and mask for an array of mutexes used to synchronize
+ * the access to port's UARs on platforms that do not support 64 bit writes.
+ * In such systems it is possible to issue the 64 bits DoorBells through two
+ * consecutive writes, each write 32 bits. The access to a UAR page (which can
+ * be accessible by all threads in the process) must be synchronized
+ * (for example, using a semaphore). Such a synchronization is not required
+ * when ringing DoorBells on different UAR pages.
+ * A port with 512 Tx queues uses 8, 4kBytes, UAR pages which are shared
+ * among the ports.
+ */
+#define MLX5_UAR_PAGE_NUM_MAX 64
+#define MLX5_UAR_PAGE_NUM_MASK ((MLX5_UAR_PAGE_NUM_MAX) - 1)
+
+/* Log 2 of the default number of strides per WQE for Multi-Packet RQ. */
+#define MLX5_MPRQ_STRIDE_NUM_N 6U
+
+/* Two-byte shift is disabled for Multi-Packet RQ. */
+#define MLX5_MPRQ_TWO_BYTE_SHIFT 0
+
+/*
+ * Minimum size of packet to be memcpy'd instead of being attached as an
+ * external buffer.
+ */
+#define MLX5_MPRQ_MEMCPY_DEFAULT_LEN 128
+
+/* Minimum number Rx queues to enable Multi-Packet RQ. */
+#define MLX5_MPRQ_MIN_RXQS 12
+
+/* Cache size of mempool for Multi-Packet RQ. */
+#define MLX5_MPRQ_MP_CACHE_SZ 32U
+
+/* Definition of static_assert found in /usr/include/assert.h */
+#ifndef HAVE_STATIC_ASSERT
+#define static_assert _Static_assert
+#endif
+
+#endif /* RTE_PMD_MLX5_DEFS_H_ */