Adding upstream version 86.0.1.upstream/86.0.1upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 302 insertions, 0 deletions

diff --git a/l10n-an/suite/chrome/mailnews/compose/composeMsgs.properties b/l10n-an/suite/chrome/mailnews/compose/composeMsgs.properties
new file mode 100644
index 0000000000..16a5290041
--- /dev/null
+++ b/l10n-an/suite/chrome/mailnews/compose/composeMsgs.properties
@@ -0,0 +1,302 @@
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+
+#
+# The following are used by the compose back end
+#
+## LOCALIZATION NOTE (unableToOpenFile, unableToOpenTmpFile):
+## %S will be replaced with the name of file that could not be opened
+unableToOpenFile=Unable to open the file %S.
+unableToOpenTmpFile=Unable to open the temporary file %S. Check your 'Temporary Directory' setting.
+
+## @name NS_MSG_UNABLE_TO_SAVE_TEMPLATE
+12502=Unable to save your message as template.
+
+## @name NS_MSG_UNABLE_TO_SAVE_DRAFT
+12503=Unable to save your message as draft.
+
+## @name NS_MSG_COULDNT_OPEN_FCC_FOLDER
+12506=Couldn't open Sent mail folder. Please verify that your Mail preferences are correct.
+
+## @name NS_MSG_NO_SENDER
+12510=No sender was specified. Please fill in your email address in the Mail & Newsgroups account settings.
+
+## @name NS_MSG_NO_RECIPIENTS
+12511=No recipients were specified. Please enter a recipient or newsgroup in the addressing area.
+
+## @name NS_MSG_ERROR_WRITING_FILE
+12512=Error writing temporary file.
+
+## @name NS_ERROR_SENDING_FROM_COMMAND
+## LOCALIZATION NOTE (12514): argument %s is SMTP server response
+12514=An error occurred while sending mail. The mail server responded:  %s.  Please verify that your email address is correct in your Mail preferences and try again.
+
+## @name NS_ERROR_SENDING_DATA_COMMAND
+## LOCALIZATION NOTE (12516): argument %s is SMTP server response
+12516=An (SMTP) error occurred while sending mail. The server responded:  %s.
+
+## @name NS_ERROR_SENDING_MESSAGE
+## LOCALIZATION NOTE (12517): argument %s is SMTP server response
+12517=An error occurred while sending mail. The mail server responded:  %s. Please check the message and try again.
+
+## @name NS_ERROR_POST_FAILED
+12518=The message could not be posted because connecting to the news server failed. The server may be unavailable or is refusing connections. Please verify that your news server settings are correct and try again, or else contact your network administrator.
+
+## @name NS_ERROR_QUEUED_DELIVERY_FAILED
+12519=An error occurred delivering unsent messages.
+
+## @name NS_ERROR_SEND_FAILED
+12520=Sending of message failed.
+
+## @name NS_ERROR_SMTP_SERVER_ERROR
+## LOCALIZATION NOTE (12524): argument %s is SMTP server response
+12524=An error occurred sending mail: SMTP server error. The server responded:  %s\n Contact your mail administrator for assistance.
+
+## @name NS_MSG_UNABLE_TO_SEND_LATER
+12525=Unable to save your message in order to send it later.
+
+## @name NS_ERROR_COMMUNICATIONS_ERROR
+## LOCALIZATION NOTE (12526): argument %d is error code
+12526=A communications error occurred: %d.  Please try again.
+
+## @name NS_ERROR_BUT_DONT_SHOW_ALERT
+12527=THIS IS JUST A PLACEHOLDER.  YOU SHOULD NEVER SEE THIS STRING.
+
+## @name NS_ERROR_TCP_READ_ERROR
+12528=A network error occurred while receiving data.  (Network Error: %s)  Try connecting again.
+
+## @name NS_ERROR_COULD_NOT_GET_USERS_MAIL_ADDRESS
+12529=An error occurred sending mail:  the return mail address was invalid.  Please verify that your email address is correct in your Mail preferences and try again.
+
+## @name NS_ERROR_MIME_MPART_ATTACHMENT_ERROR
+12531=Attachment error.
+
+## @name NS_MSG_FAILED_COPY_OPERATION
+12532=The message was sent successfully, but could not be copied to your Sent folder.
+
+## @name NS_ERROR_NNTP_NO_CROSS_POSTING
+12554=You can only send a message to one news server at a time.
+
+## @name NS_MSG_CANCELLING
+12555=Cancelling…
+
+## @name NS_ERROR_SEND_FAILED_BUT_NNTP_OK
+12560=Your message has been posted to the newsgroup but has not been sent to other recipient.
+
+## @name NS_MSG_ERROR_READING_FILE
+12563=Error reading file.
+
+followupToSenderMessage=The author of this message has requested that responses be sent only to the author. If you also want to reply to the newsgroup, add a new row to the addressing area, choose Newsgroup from the recipients list, and enter the name of the newsgroup.
+
+## @name NS_MSG_ERROR_ATTACHING_FILE
+## LOCALIZATION NOTE (12570): argument %S is file name/URI of object to be attached
+12570=There was an error attaching %S. Please check if you have access to the file.
+
+## @name NS_ERROR_SMTP_GREETING
+## LOCALIZATION NOTE (12572): argument %s is SMTP server greeting
+12572=An error occurred sending mail: The mail server sent an incorrect greeting:  %s.
+
+## @name NS_ERROR_SENDING_RCPT_COMMAND
+## LOCALIZATION NOTE (12575): argument %1$s is SMTP server response, argument %2$s is intended message recipient.
+12575=An error occurred while sending mail. The mail server responded:  %1$s. Please check the message recipient %2$s and try again.
+
+## @name NS_ERROR_STARTTLS_FAILED_EHLO_STARTTLS
+## LOCALIZATION NOTE (12582): argument %s is SMTP server
+12582=An error occurred sending mail: Unable to establish a secure link with SMTP server %S using STARTTLS since it doesn't advertise that feature. Switch off STARTTLS for that server or contact your service provider.
+
+## @name NS_ERROR_SMTP_PASSWORD_UNDEFINED
+## LOCALIZATION NOTE (12584): argument %S is SMTP account
+12584=An error occurred sending mail: Could not get password for %S. The message was not sent.
+
+## @name NS_ERROR_SMTP_TEMP_SIZE_EXCEEDED
+## LOCALIZATION NOTE (12586): argument %s is SMTP server response
+12586=The size of the message you are trying to send exceeds a temporary size limit of the server. The message was not sent; try to reduce the message size or wait some time and try again. The server responded:  %s.
+
+## @name NS_ERROR_SMTP_PERM_SIZE_EXCEEDED_1
+## LOCALIZATION NOTE (12587): argument %d is SMTP server size limit
+12587=The size of the message you are trying to send exceeds the global size limit (%d bytes) of the server. The message was not sent; reduce the message size and try again.
+
+## @name NS_ERROR_SMTP_PERM_SIZE_EXCEEDED_2
+## LOCALIZATION NOTE (12588): argument %s is SMTP server response
+12588=The size of the message you are trying to send exceeds the global size limit of the server. The message was not sent; reduce the message size and try again. The server responded:  %s.
+
+## @name NS_ERROR_SMTP_SEND_FAILED_UNKNOWN_SERVER
+## LOCALIZATION NOTE (12589): argument %S is SMTP server
+12589=An error occurred sending mail: SMTP server %S is unknown. The server may be incorrectly configured. Please verify that your SMTP server settings are correct and try again.
+
+## @name NS_ERROR_SMTP_SEND_FAILED_REFUSED
+## LOCALIZATION NOTE (12590): argument %S is SMTP server
+12590=The message could not be sent because connecting to SMTP server %S failed. The server may be unavailable or is refusing SMTP connections. Please verify that your SMTP server settings are correct and try again, or contact the server administrator.
+
+## @name NS_ERROR_SMTP_SEND_FAILED_INTERRUPTED
+## LOCALIZATION NOTE (12591): argument %S is SMTP server
+12591=The message could not be sent because the connection to SMTP server %S was lost in the middle of the transaction. Try again or contact your network administrator.
+
+## @name NS_ERROR_SMTP_SEND_FAILED_TIMEOUT
+## LOCALIZATION NOTE (12592): argument %S is SMTP server
+12592=The message could not be sent because the connection to SMTP server %S timed out. Try again or contact your network administrator.
+
+## @name NS_ERROR_SMTP_SEND_FAILED_UNKNOWN_REASON
+## LOCALIZATION NOTE (12593): argument %S is SMTP server
+12593=The message could not be sent using SMTP server %S for an unknown reason. Please verify that your SMTP server settings are correct and try again, or contact your network administrator.
+
+## @name NS_ERROR_SMTP_AUTH_CHANGE_ENCRYPT_TO_PLAIN_NO_SSL
+# LOCALIZATION NOTE (12594): $S is server hostname
+12594=The SMTP server %S does not seem to support encrypted passwords. If you just set up the account, please try changing to 'Password, transmitted insecurely' as the 'Authentication method' in the 'Account Settings | Server settings'. If it used to work and now suddenly fails, this is a common scenario how someone could steal your password.
+
+## @name NS_ERROR_SMTP_AUTH_CHANGE_ENCRYPT_TO_PLAIN_SSL
+# LOCALIZATION NOTE (12595): $S is server hostname
+12595=The SMTP server %S does not seem to support encrypted passwords. If you just set up this account, please try changing to 'Normal password' as the 'Authentication method' in the 'Account Settings | Server settings'. If it used to work and now suddenly fails, please contact your email administrator or provider.
+
+## @name NS_ERROR_SMTP_AUTH_CHANGE_PLAIN_TO_ENCRYPT
+# LOCALIZATION NOTE (12596): $S is server hostname
+12596=The SMTP server %S does not allow plaintext passwords. Please try changing to 'Encrypted password' as the 'Authentication method' in the 'Account Settings | Server settings'.
+
+## @name NS_ERROR_SMTP_AUTH_FAILURE
+# LOCALIZATION NOTE (12597): $S is server hostname
+12597=Unable to authenticate to SMTP server %S. Please check the password, and verify the 'Authentication method' in 'Account Settings | Outgoing server (SMTP)'.
+
+## @name NS_ERROR_SMTP_AUTH_GSSAPI
+# LOCALIZATION NOTE (12598): $S is server hostname
+12598=The Kerberos/GSSAPI ticket was not accepted by the SMTP server %S. Please check that you are logged in to the Kerberos/GSSAPI realm.
+
+## @name NS_ERROR_SMTP_AUTH_MECH_NOT_SUPPORTED
+# LOCALIZATION NOTE (12599): $S is server hostname
+12599=The SMTP server %S does not support the selected authentication method. Please change the 'Authentication method' in the 'Account Settings | Outgoing Server (SMTP)'.
+
+## @name NS_ERROR_SMTP_AUTH_NOT_SUPPORTED
+# LOCALIZATION NOTE (12600): $S is server hostname
+12600=Unable to authenticate to SMTP server %S. It does not support authentication (SMTP-AUTH) but you have chosen to use authentication. Please change the 'Authentication method' to 'None' in the 'Account Settings | Outgoing Server (SMTP)' or contact your email service provider for instructions.
+
+## @name NS_ERROR_ILLEGAL_LOCALPART
+# LOCALIZATION NOTE (errorIllegalLocalPart): %s is an email address with an illegal localpart
+errorIllegalLocalPart=There are non-ASCII characters in the local part of the recipient address %s. This is not yet supported. Please change this address and try again.
+
+## Strings use for the save message dialog shown when the user close a message compose window
+saveDlogTitle=Save Message
+## LOCALIZATION NOTE (SaveDlogMessages): %1$S is folder name
+saveDlogMessages=Message has not been sent. Do you want to save the message in your drafts folder (%1$S)?
+
+## generics string
+defaultSubject=(no subject)
+chooseFileToAttach=Attach File(s)
+
+##
+windowTitlePrefix=Compose:
+
+## String used by the dialog that ask the user to enter a subject
+sendMsgTitle=Send Message
+subjectDlogMessage=You did not specify a subject for this message. If you would like to provide one, please type it now.
+
+## String used by the dialog that informs the user about the newsgroup recipient
+recipientDlogMessage=This account only supports email recipients. Continuing will ignore newsgroups.
+
+#String used by the alert that tells the user an e-mail address is invalid
+## LOCALIZATION NOTE (addressInvalid): $S is email address
+addressInvalid=%1$S is not a valid e-mail address because it is not of the form user@host. You must correct it before sending the e-mail.
+
+genericFailureExplanation=Please verify that your Mail & Newsgroups account settings are correct and try again.
+
+## LOCALIZATION NOTE (undisclosedRecipients): this string must use only US_ASCII characters
+undisclosedRecipients=undisclosed-recipients
+
+## String used for attachment pretty name, when attachment is a message
+messageAttachmentSafeName=Attached Message
+## String used for attachment pretty name, when attachment is message part
+partAttachmentSafeName=Attached Message Part
+
+## String used by the Initialization Error dialog
+initErrorDlogTitle=Message Compose
+initErrorDlgMessage=An error occurred while creating a message compose window. Please try again.
+
+## String used if a file to attach does not exist when passed as
+## a command line argument
+errorFileAttachTitle=File Attach
+## LOCALIZATION NOTE (errorFileAttachMessage): %1$S will be replaced by the non-existent file name. Do not translate
+errorFileAttachMessage=The file %1$S does not exist so could not be attached to the message.
+
+## Strings used by Save as Draft/Template dialog
+SaveDialogTitle=Save Message
+## LOCALIZATION NOTE (SaveDialogMsg): %1$S is folder name, %2$S is host name
+SaveDialogMsg=Your message has been saved to the folder %1$S under %2$S.
+CheckMsg=Do not show me this dialog box again.
+
+## Strings used by prompt when Quitting while in progress
+quitComposeWindowTitle=Sending Message
+## LOCALIZATION NOTE (quitComposeWindowMessage): don't translate \n
+quitComposeWindowMessage2=%1$S is currently in the process of sending a message.\nWould you like to wait until the message has been sent before quitting or quit now?
+quitComposeWindowQuitButtonLabel2=&Quit
+quitComposeWindowWaitButtonLabel2=&Wait
+
+## Strings used by prompt for Ctrl-Enter check before sending message
+sendMessageCheckWindowTitle=Send Message
+sendMessageCheckLabel=Are you sure you are ready to send this message?
+sendMessageCheckSendButtonLabel=Send
+
+assemblingMessageDone=Assembling message…Done
+assemblingMessage=Assembling message…
+
+smtpDeliveringMail=Delivering mail…
+smtpMailSent=Mail sent successfully
+
+assemblingMailInformation=Assembling mail information…
+## LOCALIZATION NOTE (gatheringAttachment): argument %S is file name/URI of attachment
+gatheringAttachment=Attaching %S…
+creatingMailMessage=Creating mail message…
+
+## LOCALIZATION NOTE (copyMessageStart): argument %S is folder name
+copyMessageStart=Copying message to %S folder…
+copyMessageComplete=Copy complete.
+copyMessageFailed=Copy failed.
+
+## LOCALIZATION NOTE (largeMessageSendWarning):
+## %S is the message size in user-friendly notation. Do not translate.
+largeMessageSendWarning=Warning! You are about to send a message of size %S which may exceed the allowed limit on the mail server. Are you sure that you want to do this?
+
+sendingMessage=Sending message…
+sendMessageErrorTitle=Send Message Error
+postingMessage=Posting message…
+
+sendLaterErrorTitle=Send Later Error
+saveDraftErrorTitle=Save Draft Error
+saveTemplateErrorTitle=Save Template Error
+
+## LOCALIZATION NOTE (failureOnObjectEmbeddingWhileSaving): argument %.200S is file name/URI of object to be embedded
+failureOnObjectEmbeddingWhileSaving=There was a problem including the file %.200S in the message. Would you like to continue saving the message without this file?
+## LOCALIZATION NOTE (failureOnObjectEmbeddingWhileSending): argument %.200S is file name/URI of object to be embedded
+failureOnObjectEmbeddingWhileSending=There was a problem including the file %.200S in the message. Would you like to continue sending the message without this file?
+returnToComposeWindowQuestion=Would you like to return to the compose window?
+
+## reply header in composeMsg
+## LOCALIZATION NOTE (mailnews.reply_header_authorwrotesingle): #1 is author (name of person replying to)
+mailnews.reply_header_authorwrotesingle=#1 wrote:
+## LOCALIZATION NOTE (mailnews.reply_header_ondateauthorwrote): #1 is author, #2 is date, #3 is time
+mailnews.reply_header_ondateauthorwrote=On #2 #3, #1 wrote:
+## LOCALIZATION NOTE (mailnews.reply_header_authorwroteondate): #1 is author, #2 is date, #3 is time
+mailnews.reply_header_authorwroteondate=#1 wrote on #2 #3:
+
+## reply header in composeMsg
+## user specified
+mailnews.reply_header_originalmessage=-------- Original Message --------
+
+## forwarded header in composeMsg
+## user specified
+mailnews.forward_header_originalmessage=-------- Forwarded Message --------
+
+## Strings used by the rename attachment dialog
+renameAttachmentTitle=Rename Attachment
+renameAttachmentMessage=New attachment name:
+
+## LOCALIZATION NOTE(smtpEnterPasswordPrompt): Do not translate the
+## word $S. Place the word $S where the host name should appear.
+smtpEnterPasswordPrompt=Enter your password for %S:
+## LOCALIZATION NOTE(smtpEnterPasswordPromptWithUsername): Do not translate the
+## words %1$S and %2$S. Place the word %1$S where the host name should appear,
+## and %2$S where the user name should appear.
+smtpEnterPasswordPromptWithUsername=Enter your password for %2$S on %1$S:
+smtpEnterPasswordPromptTitle=SMTP Server Password Required
+
+## LOCALIZATION NOTE(errorSavingMsg): Do not translate the word %S. It
+## will be replaced with the name of the folder the message is being saved to.
+errorSavingMsg=There was an error saving the message to %S. Retry?