Adding upstream version 86.0.1.upstream/86.0.1upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 694 insertions, 0 deletions

diff --git a/other-licenses/ia2/Accessible2.idl b/other-licenses/ia2/Accessible2.idl
new file mode 100644
index 0000000000..71f01f684f
--- /dev/null
+++ b/other-licenses/ia2/Accessible2.idl
@@ -0,0 +1,694 @@
+/*************************************************************************
+ *
+ *  File Name (Accessible2.idl)
+ * 
+ *  IAccessible2 IDL Specification 
+ * 
+ *  Copyright (c) 2007, 2013 Linux Foundation 
+ *  Copyright (c) 2006 IBM Corporation 
+ *  Copyright (c) 2000, 2006 Sun Microsystems, Inc. 
+ *  All rights reserved. 
+ *   
+ *   
+ *  Redistribution and use in source and binary forms, with or without 
+ *  modification, are permitted provided that the following conditions 
+ *  are met: 
+ *   
+ *   1. Redistributions of source code must retain the above copyright 
+ *      notice, this list of conditions and the following disclaimer. 
+ *   
+ *   2. Redistributions in binary form must reproduce the above 
+ *      copyright notice, this list of conditions and the following 
+ *      disclaimer in the documentation and/or other materials 
+ *      provided with the distribution. 
+ *
+ *   3. Neither the name of the Linux Foundation nor the names of its 
+ *      contributors may be used to endorse or promote products 
+ *      derived from this software without specific prior written 
+ *      permission. 
+ *   
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+ *  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+ *  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+ *  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+ *  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+ *  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+ *  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
+ *  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
+ *  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 
+ *  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, 
+ *  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 
+ *   
+ *  This BSD License conforms to the Open Source Initiative "Simplified 
+ *  BSD License" as published at: 
+ *  http://www.opensource.org/licenses/bsd-license.php 
+ *   
+ *  IAccessible2 is a trademark of the Linux Foundation. The IAccessible2 
+ *  mark may be used in accordance with the Linux Foundation Trademark 
+ *  Policy to indicate compliance with the IAccessible2 specification. 
+ * 
+ ************************************************************************/ 
+
+/** @mainpage
+
+ @section _interfaces Interfaces
+  IAccessible2\n
+  IAccessible2_2\n
+  IAccessible2_3\n
+  IAccessibleAction\n
+  IAccessibleApplication\n
+  IAccessibleComponent\n
+  IAccessibleDocument\n
+  IAccessibleEditableText\n
+  IAccessibleHypertext\n
+  IAccessibleHypertext2\n
+  IAccessibleHyperlink\n
+  IAccessibleImage\n
+  IAccessibleRelation\n
+  IAccessibleTable [Deprecated]\n
+  IAccessibleTable2\n
+  IAccessibleTableCell\n
+  IAccessibleText\n
+  IAccessibleText2\n
+  IAccessibleValue
+
+ @section _structs Structs
+  IA2Locale\n
+  IA2Range\n
+  IA2TableModelChange\n
+  IA2TextSegment
+
+ @section _enums Enums
+  ::IA2Actions values are predefined actions for use when implementing support for HTML5 media.\n
+  ::IA2CoordinateType values define the requested coordinate type (screen or parent window).\n
+  ::IA2EventID values identify events.\n
+  ::IA2Role values defines roles which are in addition to the existing MSAA roles.\n
+  ::IA2ScrollType values define where to place an object or substring on the screen.\n
+  ::IA2States values define states which are in addition to the existing MSAA states.\n
+  ::IA2TableModelChangeType values describe the kinds of changes made to a table (insert, delete, update).\n
+  ::IA2TextBoundaryType values define the requested text unit (character, word, sentence, line, paragraph).\n
+  ::IA2TextSpecialOffsets values define special offsets for use in the text interfaces.
+
+ @section _constants Constants
+  @ref grpRelations
+
+ @section _misc Miscellaneous
+  @ref _licensePage "BSD License"\n
+  @ref _generalInfo "General Information"\n
+
+ @page _licensePage BSD License
+  %IAccessible2 IDL Specification
+
+  Copyright (c) 2007, 2013 Linux Foundation\n
+  Copyright (c) 2006 IBM Corporation\n
+  Copyright (c) 2000, 2006 Sun Microsystems, Inc.\n
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without 
+  modification, are permitted provided that the following conditions 
+  are met: 
+    
+   1. Redistributions of source code must retain the above copyright 
+      notice, this list of conditions and the following disclaimer. 
+ 
+   2. Redistributions in binary form must reproduce the above 
+      copyright notice, this list of conditions and the following 
+      disclaimer in the documentation and/or other materials 
+      provided with the distribution. 
+ 
+   3. Neither the name of the Linux Foundation nor the names of its 
+      contributors may be used to endorse or promote products 
+      derived from this software without specific prior written 
+      permission. 
+ 
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
+  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 
+  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, 
+  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 
+ 
+  This BSD License conforms to the Open Source Initiative "Simplified 
+  BSD License" as published at: 
+  http://www.opensource.org/licenses/bsd-license.php 
+ 
+  %IAccessible2 is a trademark of the Linux Foundation. The %IAccessible2 
+  mark may be used in accordance with the
+  <a href="http://www.linuxfoundation.org/collaborate/workgroups/accessibility/trademark-policy">
+  Linux Foundation Trademark Policy</a> to indicate compliance with the %IAccessible2 specification. 
+
+ @page _generalInfo General Information 
+  The following information is applicable to two or more interfaces.
+
+ @ref _errors\n
+ @ref _memory\n
+ &nbsp;&nbsp;@ref _arrayConsideration\n
+ @ref _indexes\n
+ @ref _enums\n
+ @ref _specialOffsets\n
+ @ref _dicoveringInterfaces\n
+ @ref _changingInterfaces\n
+ @ref _applicationInfo\n
+ @ref _childIDs\n
+ @ref _variants\n
+ @ref _iaaction-iahyperlink\n
+ @ref _trademark
+
+ @section _errors Error Handling
+  HRESULT values are defined by the Microsoft&reg; Win32&reg; API.  For more information, refer to
+  <a href="http://msdn.microsoft.com/en-us/library/windows/desktop/aa378137%28v=vs.85%29.aspx">
+  Interpreting HRESULT Values</a> in MSDN&reg;.
+
+  Note that the S_FALSE return value is considered a non-error value and the 
+  SUCCEEDED macro will return TRUE.  S_FALSE is used when there is no failure
+  but there was nothing valid to return, e.g. in IAccessible2::attributes when
+  there are no attributes.  When S_FALSE is returned [out] pointer types should 
+  be NULL and [out] longs should generally be 0, but sometimes -1 is used such
+  as IAccessible2::indexInParent, IAccessibleText::caretOffset, and
+  IAccessibleHypertext::hyperlinkIndex.
+
+  Note that for BSTR [out] variables common COM practice is that the server does 
+  the SysAllocString and the client does the SysFreeString.  Also note that when
+  NULL is returned there is no need for the client to call SysFreeString.  Please
+  refer to the documentation for each method for more details regarding error handling.
+
+ @section _memory Memory Management
+  The following memory management issues should be considered:
+  @li Although [out] BSTR variables are declared by the client, their space is 
+   allocated by the server.  They need to be freed with SysFreeString by the 
+   client at end of life; the same is true when BSTRs are used in structs or 
+   arrays which are passed to the server.
+  @li If there is no valid [out] BSTR to return, the server should return S_FALSE and 
+   assign NULL to the output, e.g. *theOutBSTR = NULL;. 
+  @li COM interfaces need to be referenced with AddRef when used and dereferenced
+   with Release at end of life.
+  @li Single [out] longs, HWNDs, booleans, and structs are declared by the caller
+   and passed by reference. The marshaller does all the memory management.
+  
+  The following articles may be helpful for understanding memory management issues:
+  @li An article by Don Box in a
+   <a href="http://www.microsoft.com/msj/1196/activex1196.aspx">Q & A section</a>
+   of the November 1996 edition of the Microsoft Systems Journal.
+  @li A posting to a CodeGuru forum, 
+   <a href="http://www.codeguru.com/forum/showthread.php?t=364511">Windows SDK 
+   String: What are the rules for BSTR allocation and deallocation?</a>
+
+ @subsection _arrayConsideration Special Consideration when using Arrays
+  There are several methods which return arrays.  In the case of IAccessible2::relations
+  and IAccessibleRelation::targets the client must allocate and free the arrays.
+
+  For the remaining methods which return arrays, the server must allocate the array
+  and the client must free the array when no longer needed.  These methods are
+  IAccessible2::extendedStates, IAccessible2::localizedExtendedStates,
+  IAccessible2_2::relationTargetsOfType, IAccessibleAction::keyBinding, 
+  IAccessibleHypertext2::hyperlinks, IAccessibleTable::selectedChildren, 
+  IAccessibleTable::selectedColumns, IAccessibleTable::selectedRows,
+  IAccessibleTable2::selectedCells, IAccessibleTable2::selectedColumns,
+  IAccessibleTable2::selectedRows, IAccessibleTableCell::columnHeaderCells,
+  and IAccessibleTableCell::rowHeaderCells.
+  For those methods, the server must allocate both the top level array and any storage 
+  associated with it, e.g. for BSTRs.  The server must allocate the arrays with 
+  CoTaskMemAlloc and any BSTRs with SysAllocString.  The client must use CoTaskMemFree
+  to free the array and any BSTRs must be freed with SysFreeString.  
+  
+  Also, the IDL for IAccessible2::extendedStates, IAccessible2::localizedExtendedStates, 
+  IAccessibleAction::keyBinding, IAccessibleTable::selectedChildren, 
+  IAccessibleTable::selectedColumns, and IAccessibleTable::selectedRows includes an
+  extraneous [in] parameter for the caller to specify the max size of the array.
+  This parameter will be ignored by the COM server.
+
+ @section _indexes Zero and One Based Indexes
+  Unless otherwise specified all offsets and indexes are 0 based. 
+
+ @section _enums Enums
+  Note that enums start at 0.
+
+ @section _specialOffsets Special Offsets for use in the IAccessibleText and IAccessibleEditableText Methods
+  IAccessibleText and IAccessibleEditableText can use one or more of the following
+  special offset values.  They are defined in the ::IA2TextSpecialOffsets enum.
+  @li Using ::IA2_TEXT_OFFSET_LENGTH (-1) as an offset in any of the IAccessibleText or
+   IAccessibleEditableText methods is the same as specifying the length of the string.
+  @li Using ::IA2_TEXT_OFFSET_CARET (-2) as an offset for IAccessibleText::textBeforeOffset, 
+   IAccessibleText::textAtOffset, and IAccessibleText::textAfterOffset indicates that the 
+   text related to the physical location of the caret should be used.  This is needed for 
+   applications that consider the character offset of the end of one line (as reached by 
+   pressing the End key) the same as the offset of the first character on the next line.
+   Since the same offset is associated with two different lines a special means is needed 
+   to fetch text from the line where the caret is physically located.
+
+ @section _dicoveringInterfaces Discovery of Interfaces
+  In general AT (Assistive Technology) should try IAccessible2 interfaces, followed by using 
+  the MSAA (Microsoft&reg; Active Accessibility&reg;) interfaces.  (In cases where the an application
+  is known to have custom interfaces which provide information not supplied by IAccessible2
+  or MSAA, then those custom interfaces can be used.)  The AT can then, by default, support
+  unknown IAccessible2/MSAA applications, without the application developers having to request
+  AT vendors for support on an individual application by application basis.
+
+  When you have a reference to an IAccessible and require a reference to an IAccessible2 use 
+  QueryService as follows:
+  @code
+  // pAcc is a reference to the accessible object's IAccessible interface. 
+  IServiceProvider *pService = NULL; 
+  hr = pAcc->QueryInterface(IID_IServiceProvider, (void **)&pService); 
+  if(SUCCEEDED(hr)) { 
+    IAccessible2 *pIA2 = NULL; 
+    hr = pService->QueryService(IID_IAccessible, IID_IAccessible2, (void**)&pIA2); 
+    if (SUCCEEDED(hr) && pIA2) { 
+      // The control supports IAccessible2. 
+      // pIA2 is the reference to the accessible object's IAccessible2 interface.
+    } 
+  } 
+  @endcode
+
+  @section _changingInterfaces Changing between Accessible Interfaces
+  Note that developers must always implement MSAA's IAccessible and, if needed, some
+  of the interfaces in the set of IAccessible2 interfaces.  Although the IAccessible2
+  IDL is coded such that IAccessible2 is a subclass of MSAA's IAccessible, none of
+  MSAA's IAccessible methods are redefined by IAccessible2.
+
+  QueryService must be used to switch from a reference to an MSAA IAccessible interface 
+  to another interface.  This has been 
+  <a href="http://www.atia.org/files/public/Introducing_IAccessibleEx.doc">
+  documented</a> and the pertinent facts have been extracted below: 
+
+  @par 
+   Why use QueryService instead of just using QueryInterface to get IAccessibleEx 
+   directly? The reason is that since MSAA 2.0, clients don't talk to a server's 
+   IAccessible interface directly; instead they talk to an intermediate MSAA-provided 
+   wrapper that calls through to the original IAccessible. This wrapper provides services 
+   such as implementing IDispatch, supplying information from MSAA 2.0's Dynamic Annotation 
+   service, and scaling locations when running on Windows Vista with DPI scaling enabled. 
+   QueryService is the supported way to expose additional interfaces from an existing 
+   IAccessible and was originally used by MSHTML to expose IHTMLElement objects corresponding 
+   to IAccessibles. QueryService is often more convenient for servers to implement than 
+   QueryInterface because it does not have the same requirements for preserving object 
+   identity or symmetry/transitivity as QueryInterface, so QueryService allows servers to 
+   easily implement the interface on the same object or a separate object. The latter is 
+   often hard to do with QueryInterface unless the original object supports aggregation. 
+
+  Two related references in MSDN&reg; are: 
+  @li <a href="http://msdn.microsoft.com/en-us/library/ms696078(VS.85).aspx">
+  "Using QueryService to expose a native object model interface for an IAccessible object"</a>
+  @li <a href="http://msdn.microsoft.com/en-us/library/ms528415.aspx#acc_obj"> 
+  "Accessing the Internet Explorer Object Associated with an Accessible Object"</a>
+
+  Based on this information from Microsoft, QueryService must be used to switch back and forth 
+  between a reference to an MSAA IAccessible interface and any of the IAccessible2 interfaces. 
+
+  Regarding switching between any of the IAccessible2 interfaces, applications implementing
+  IAccessible2 should implement the IAccessible2 interfaces on a single object since ATs
+  will be using QueryInterface to switch between the IAccessilbe2 interfaces.  Implementing
+  the IAccessible2 interfaces on separate objects would require the use of QueryService.
+  There is one exception, IAccessibleApplication can be implemented on a separate object so
+  its common code doesn't have to be included in each accessible object.  ATs should use
+  QueryService to access IAccessibleApplication.
+
+ @section _applicationInfo Access to Information about the Application
+  Servers implementing IAccessible2 should provide access to the IAccessibleApplication 
+  interface via QueryService from any object so that ATs can easily determine specific 
+  information about the application such as its name or version.
+
+ @section _childIDs Child IDs
+  The IAccessible2 interfaces do not support child IDs, i.e. simple child elements.
+  Full accessible objects must be created for each object that supports IAccessible2.
+  Therefore MSAA's get_accChild should never return a child ID (other than CHILDID_SELF)
+  for an object that implements any of the IAccessible2 interfaces.
+
+  Microsoft's UI Automation specification has the same limitation and this was resolved
+  in the UI Automation Express specification by adding IAccessibleEx::GetObjectForChild
+  and IAccessibleEx::GetIAccessiblePair.  These methods allow mapping back and forth 
+  between an IAccessibleEx and an {IAccessible, Child ID} pair.  A future version of 
+  IAccessible2 may include similar methods to map back and forth between an IAccessible2
+  and an {IAccessible, Child ID} pair.
+
+ @section _variants VARIANTs
+  Some methods return a VARIANT.  Implementers need to make sure that the return type is 
+  specified, i.e. VT_I4, VT_IDISPATCH, etc.  The methods that return VARIANTs are 
+  IAccessibleHyperlink::anchor, IAccessibleHyperlink::anchorTarget, IAccessibleValue::currentValue,
+  IAccessibleValue::maximumValue, IAccessibleValue::minimumValue.
+
+ @section _iaaction-iahyperlink IAccessibleHyperlink as subclass of IAccessibleAction
+  In this version of the IDL, IAccessibleHyperlink is a subclass of IAccessibleAction.  
+  However, there is no practical need for that inheritance and in some cases, such as
+  an image map of smart tags, it doesn't make sense because such an image map doesn't 
+  have actionable objects; it's the secondary smart tags that are actionable.  As a 
+  result, implementations should not rely on the inheritance as it may be removed in 
+  a later version of the IDL.
+
+ @section _trademark Trademark Attribution
+  The names of actual companies and products mentioned herein may be the trademarks of
+  their respective owners.  In particular, Active Accessibility, Microsoft, MSDN, and Win32
+  are trademarks of the Microsoft group of companies in the U.S.A. and/or other countries.
+
+**/
+
+import "objidl.idl";
+import "oaidl.idl";
+import "oleacc.idl";
+import "AccessibleRelation.idl";
+import "AccessibleStates.idl";
+import "IA2CommonTypes.idl";
+
+/** A structure defining the locale of an accessible object.
+ 
+IAccessible2::locale returns this struct.
+*/
+typedef struct IA2Locale {
+  BSTR language; ///< ISO 639-1 Alpha-2 two character language code
+  BSTR country;  ///< ISO 3166-1 Alpha-2 two character country code
+  BSTR variant;  ///< Application specific variant of the locale
+} IA2Locale;
+
+/** @brief This interface exposes the primary set of information about an
+ IAccessible2 enabled accessible object.
+
+ This interface must always be provided for objects that support some
+ portion of the collection of the %IAccessible2 interfaces.
+
+ Please refer to @ref _changingInterfaces "Changing between Accessible Interfaces"
+ for special considerations related to use of the MSAA IAccessible interface and 
+ the set of %IAccessible2 interfaces.
+ */
+[object, uuid(E89F726E-C4F4-4c19-BB19-B647D7FA8478)]
+interface IAccessible2 : IAccessible
+{
+
+  /** @brief Returns the number of accessible relations for this object.
+   @param [out] nRelations
+   @retval S_OK
+  */
+  [propget] HRESULT nRelations
+    (
+     [out, retval] long *nRelations
+    );
+
+  /** @brief Returns one accessible relation for this object.
+   @param [in] relationIndex
+     0 based
+   @param [out] relation
+   @retval S_OK
+   @retval E_INVALIDARG if bad [in] passed
+  */
+  [propget] HRESULT relation
+    (
+     [in] long relationIndex,
+     [out, retval] IAccessibleRelation **relation
+    );
+
+  /** @brief Returns multiple accessible relations for this object.
+   @param [in] maxRelations
+     maximum size of the array allocated by the client
+   @param [out] relations
+    The array of accessible relation objects.  Note that this array is to be
+	allocated by the client and freed when no longer needed.  Refer to @ref 
+	_arrayConsideration "Special Consideration when using Arrays" for more details.
+   @param [out] nRelations 
+    actual number of relations in the returned array (not more than maxRelations)
+   @retval S_OK
+   @retval S_FALSE if there are no relations, nRelations is set to 0
+   @note As a performant alternative, client code should consider using IAccessible2_2::relationTargetsOfType.
+  */
+  [propget] HRESULT relations
+    (
+     [in] long maxRelations, 
+     [out, size_is(maxRelations), length_is(*nRelations)]
+       IAccessibleRelation **relations, 
+     [out, retval] long *nRelations 
+    );
+
+  /** @brief Returns the role of an %IAccessible2 object.
+   @param [out] role
+    The role of an %IAccessible2 object.
+   @retval S_OK
+   @note 
+   @li For convenience MSAA roles are also passed through this method so the
+    AT doesn't have to also fetch roles through MSAA's get_accRole.
+   @li %IAccessible2 roles should not be passed through MSAA's get_accRole.
+   @li For compatibility with non IAccessible2 enabled ATs, IAccessible2 
+    applications should also add support to get_accRole to return the closest 
+	MSAA role or ROLE_SYSTEM_CLIENT (the MSAA defined default role) if there 
+	is not a good match.  
+   @li This method is missing a [propget] prefix in the IDL.  The result is the
+    method is named role in generated C++ code instead of get_role.
+  */
+  HRESULT role
+    (
+     [out, retval] long *role
+    );
+
+  /** @brief Makes an object visible on the screen.
+   @param [in] scrollType
+    Defines where the object should be placed on the screen.
+   @retval S_OK
+   @retval E_INVALIDARG if bad [in] passed
+  */
+  HRESULT scrollTo
+    (
+     [in] enum IA2ScrollType scrollType 
+    );
+
+  /** @brief Moves the top left of an object to a specified location.
+
+   @param [in] coordinateType
+    Specifies whether the coordinates are relative to the screen or the parent object.
+   @param [in] x
+    Defines the x coordinate.
+   @param [in] y
+    Defines the y coordinate.
+   @retval S_OK
+   @retval E_INVALIDARG if bad [in] passed
+  */
+  HRESULT scrollToPoint
+    (
+     [in] enum IA2CoordinateType coordinateType,
+	 [in] long x,
+	 [in] long y 
+    );
+
+  /** @brief Returns grouping information.
+   
+   Used for tree items, list items, tab panel labels, radio buttons, etc.
+   Also used for collections of non-text objects.
+
+   @param [out] groupLevel
+    1 based, 0 indicates that this value is not applicable
+   @param [out] similarItemsInGroup
+    1 based, 0 indicates that this value is not applicable
+   @param [out] positionInGroup
+    1 based, 0 indicates that this value is not applicable. This is an index
+    into the objects in the current group, not an index into all the objects
+    at the same group level.
+   @retval S_OK if at least one value is valid
+   @retval S_FALSE if no values are valid, [out] values are 0s
+   @note This method is meant to describe the nature of an object's containment
+    structure.  It's exposed by trees, tree grids, nested lists, nested menus,
+    but not headings, which uses the level object attribute.  It is also exposed
+    by radio buttons (with groupLevel == 0).
+   @note This is normally not implemented on a combo box to describe the nature
+    of its contents.  Normally an AT will get that information from its child list 
+    object.  However, in some cases when non-edit combo boxes are not able to be structured
+    such that the list is a child of the combo box, this method is implemented on
+    the combo box itself. ATs can use this interface if a child list is not found.
+	*/
+  [propget] HRESULT groupPosition
+    (
+     [out] long *groupLevel,
+     [out] long *similarItemsInGroup,
+     [out, retval] long *positionInGroup 
+    );
+
+  /** @brief Returns the bit strip containing any IAccessible2 states.
+  
+   The IAccessible2 states are in addition to the MSAA states and are defined in
+   the IA2States enum.
+
+   @param [out] states
+   @retval S_OK
+  */
+  [propget] HRESULT states
+    (
+	 [out, retval] AccessibleStates *states
+    );
+
+  /** @brief Returns the extended role.
+   
+   An extended role is a role which is dynamically generated by the application.
+   It is not predefined by the %IAccessible2 specification.
+   
+   @param [out] extendedRole
+   @retval S_OK
+   @retval S_FALSE if there is nothing to return, [out] value is NULL
+  */
+  [propget] HRESULT extendedRole
+    (
+	 [out, retval] BSTR *extendedRole
+    );
+
+  /** @brief Returns the localized extended role.
+   @param [out] localizedExtendedRole
+   @retval S_OK
+   @retval S_FALSE if there is nothing to return, [out] value is NULL
+  */
+  [propget] HRESULT localizedExtendedRole
+    (
+	 [out, retval] BSTR *localizedExtendedRole
+    );
+
+  /** @brief Returns the number of extended states.
+   @param [out] nExtendedStates
+   @retval S_OK
+  */
+  [propget] HRESULT nExtendedStates
+    (
+     [out, retval] long *nExtendedStates
+    );
+
+  /** @brief Returns the extended states (array of strings).
+
+   An extended state is a state which is dynamically generated by the application.
+   It is not predefined by the %IAccessible2 specification.
+
+   @param [in] maxExtendedStates
+    This parameter is ignored. Refer to @ref _arrayConsideration 
+	"Special Consideration when using Arrays" for more details.
+   @param [out] extendedStates
+    This array is allocated by the server.  The client must free it with CoTaskMemFree.
+   @param [out] nExtendedStates
+    The number of extended states returned; the size of the returned array.
+   @retval S_OK
+   @retval S_FALSE if there are no states, [out] values are NULL and 0 respectively
+  */
+  [propget] HRESULT extendedStates
+    (
+     [in] long maxExtendedStates,
+     [out, size_is(,maxExtendedStates), length_is(,*nExtendedStates)] BSTR **extendedStates,
+     [out, retval] long *nExtendedStates
+    );
+
+  /** @brief Returns the localized extended states (array of strings).
+
+   @param [in] maxLocalizedExtendedStates
+    This parameter is ignored. Refer to @ref _arrayConsideration 
+	"Special Consideration when using Arrays" for more details.
+   @param [out] localizedExtendedStates
+    This array is allocated by the server.  The client must free it with CoTaskMemFree. 
+   @param [out] nLocalizedExtendedStates
+    The number of localized extended states returned; the size of the returned array.
+   @retval S_OK
+   @retval S_FALSE if there are no states, [out] values are NULL and 0 respectively
+  */
+  [propget] HRESULT localizedExtendedStates
+    (
+     [in] long maxLocalizedExtendedStates,
+     [out, size_is(,maxLocalizedExtendedStates), length_is(,*nLocalizedExtendedStates)] BSTR **localizedExtendedStates,
+     [out, retval] long *nLocalizedExtendedStates
+    );
+
+  /** @brief Returns the unique ID.
+   
+   The uniqueID is an identifier for this object, is unique within the
+   current window, and remains the same for the lifetime of the accessible
+   object. 
+   
+   The uniqueID is not related to:
+   - the MSAA objectID which is used by the server to disambiguate between
+   IAccessibles per HWND or
+   - the MSAA childID which is used to disambiguate between children being
+   managed by an IAccessible.
+
+   This value is provided so the AT can have access to a unique runtime persistent 
+   identifier even when not handling an event for the object.
+   
+   An example of when this value is useful is if the AT wants to build a cache. 
+   The AT could cache the uniqueIDs in addition to other data being cached. 
+   When an event is fired the AT could map the uniqueID to its internal model.
+   Thus, if there's a REORDER/SHOW/HIDE event the AT knows which part of the 
+   internal structure has been invalidated and can refetch just that part.
+
+   This value can also be used by an AT to determine when the current control
+   has changed. If the role is the same for two controls that are adjacent in 
+   the tab order, this can be used to detect the new control.
+
+   Another use of this value by an AT is to identify when a grouping object has 
+   changed, e.g. when moving from a radio button in one group to a radio button in a 
+   different group.
+
+   One means of implementing this would be to create a factory with a 32 bit number 
+   generator and a reuse pool.  The number generator would emit numbers starting 
+   at 1.  Each time an object's life cycle ended, its number would be saved into a 
+   reuse pool.  The number generator would be used whenever the reuse pool was empty.
+
+   Another way to create a unique ID is to generate it from a pointer value, e.g. an
+   object's address. That would be unique because no two active objects can use the
+   same allocated memory space.
+
+   @param [out] uniqueID
+   @retval S_OK
+  */
+  [propget] HRESULT uniqueID
+    (
+     [out, retval] long *uniqueID
+    );
+
+  /** @brief Returns the window handle for the parent window which contains this object.
+
+   This is the same window handle which will be passed for any events that occur on the 
+   object, but is cached in the accessible object for use when it would be helpful to 
+   access the window handle in cases where an event isn't fired on this object.
+
+   A use case is when a screen reader is grabbing an entire web page on a page load. 
+   Without the availability of windowHandle, the AT would have to get the window handle
+   by using WindowFromAccessibleObject on each IAccessible, which is slow because it's 
+   implemented by oleacc.dll as a loop which crawls up the ancestor chain and looks for 
+   a ROLE_WINDOW object, mapping that back to a window handle.
+   
+   @param [out] windowHandle
+   @retval S_OK
+  */
+  [propget] HRESULT windowHandle
+    (
+     [out, retval] HWND *windowHandle
+    );
+ 
+  /** @brief Returns the index of this object in its parent object.
+   @param [out] indexInParent
+     0 based; -1 indicates there is no parent; the upper bound is the value 
+	 returned by the parent's IAccessible::get_accChildCount.
+   @retval S_OK
+   @retval S_FALSE if no parent, [out] value is -1
+  */
+  [propget] HRESULT indexInParent
+    (
+     [out, retval] long *indexInParent
+    );
+
+  /** @brief Returns the IA2Locale of the accessible object. 
+   @param [out] locale
+   @retval S_OK
+  */
+  [propget] HRESULT locale
+    (
+     [out, retval] IA2Locale *locale
+    );
+
+  /** @brief Returns the attributes specific to this object, such as a cell's formula.
+   @param [out] attributes
+   @retval S_OK
+   @retval S_FALSE returned if there is nothing to return, [out] value is NULL
+  */
+  [propget] HRESULT attributes
+    (
+     [out, retval] BSTR *attributes
+    );
+
+}
+