diff options
Diffstat (limited to 'l10n-ca-valencia/devtools/client/aboutdebugging.ftl')
-rw-r--r-- | l10n-ca-valencia/devtools/client/aboutdebugging.ftl | 282 |
1 files changed, 282 insertions, 0 deletions
diff --git a/l10n-ca-valencia/devtools/client/aboutdebugging.ftl b/l10n-ca-valencia/devtools/client/aboutdebugging.ftl new file mode 100644 index 0000000000..4cb3c46d96 --- /dev/null +++ b/l10n-ca-valencia/devtools/client/aboutdebugging.ftl @@ -0,0 +1,282 @@ +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, You can obtain one at http://mozilla.org/MPL/2.0/. + + +### These strings are used inside the about:debugging UI. + + +# Page Title strings + + +# Sidebar strings + +# Sidebar heading for connecting to some remote source +about-debugging-sidebar-setup = + .name = Configuració + +# Text displayed in the about:debugging sidebar when USB devices discovery is enabled. +about-debugging-sidebar-usb-enabled = USB activat + +# Text displayed in the about:debugging sidebar when USB devices discovery is disabled +# (for instance because the mandatory ADB extension is not installed). +about-debugging-sidebar-usb-disabled = USB desactivat + +# Connection status (connected) for runtime items in the sidebar +aboutdebugging-sidebar-runtime-connection-status-connected = Connectat +# Connection status (disconnected) for runtime items in the sidebar +aboutdebugging-sidebar-runtime-connection-status-disconnected = Desconnectat + +# Text displayed in the about:debugging sidebar when no device was found. +about-debugging-sidebar-no-devices = No s'ha descobert cap dispositiu + +# Text displayed in buttons found in sidebar items representing remote runtimes. +# Clicking on the button will attempt to connect to the runtime. +about-debugging-sidebar-item-connect-button = Connecta + +# Text displayed in buttons found in sidebar items when the runtime is connecting. +about-debugging-sidebar-item-connect-button-connecting = S'està connectant… + +# Text displayed in buttons found in sidebar items when the connection failed. +about-debugging-sidebar-item-connect-button-connection-failed = La connexió ha fallat + +# Text displayed as connection error in sidebar item when the connection has timed out. +about-debugging-sidebar-item-connect-button-connection-timeout = S'ha esgotat el temps d'espera de la connexió + +# Temporary text displayed in sidebar items representing remote runtimes after +# successfully connecting to them. Temporary UI, do not localize. +about-debugging-sidebar-item-connected-label = Connectat + +# Text displayed in sidebar items for remote devices where a compatible browser (eg +# Firefox) has not been detected yet. Typically, Android phones connected via USB with +# USB debugging enabled, but where Firefox is not started. +about-debugging-sidebar-runtime-item-waiting-for-browser = S'està esperant el navegador… + +# Text displayed in sidebar items for remote devices that have been disconnected from the +# computer. +about-debugging-sidebar-runtime-item-unplugged = Desconnectat + +# Title for runtime sidebar items that are related to a specific device (USB, WiFi). +about-debugging-sidebar-runtime-item-name = + .title = { $displayName } ({ $deviceName }) +# Title for runtime sidebar items where we cannot get device information (network +# locations). +about-debugging-sidebar-runtime-item-name-no-device = + .title = { $displayName } + +# Text to show in the footer of the sidebar that links to a help page +# (currently: https://developer.mozilla.org/docs/Tools/about:debugging) +about-debugging-sidebar-support = Assistència per a la depuració + +# Text to show as the ALT attribute of a help icon that accompanies the help about +# debugging link in the footer of the sidebar +about-debugging-sidebar-support-icon = + .alt = Icona d'ajuda + +# Text displayed in a sidebar button to refresh the list of USB devices. Clicking on it +# will attempt to update the list of devices displayed in the sidebar. +about-debugging-refresh-usb-devices-button = Actualitza els dispositius + +# Setup Page strings + +# Title of the Setup page. +about-debugging-setup-title = Configuració + +# Title of the heading Connect section of the Setup page. +about-debugging-setup-connect-heading = Connecteu un dispositiu + +# USB section of the Setup page +about-debugging-setup-usb-title = USB + +# Explanatory text displayed in the Setup page when USB debugging is disabled +about-debugging-setup-usb-disabled = Si activeu esta opció, es baixaran i s'afegiran els components necessaris de depuració USB de l'Android en el { -brand-shorter-name }. + +# Text of the button displayed in the USB section of the setup page when USB debugging is disabled. +# Clicking on it will download components needed to debug USB Devices remotely. +about-debugging-setup-usb-enable-button = Activa els dispositius USB + +# Text of the button displayed in the USB section of the setup page when USB debugging is enabled. +about-debugging-setup-usb-disable-button = Desactiva els dispositius USB + +# Text of the button displayed in the USB section of the setup page while USB debugging +# components are downloaded and installed. +about-debugging-setup-usb-updating-button = S'està actualitzant… + +# USB section of the Setup page (USB status) +about-debugging-setup-usb-status-enabled = Activat +about-debugging-setup-usb-status-disabled = Desactivat +about-debugging-setup-usb-status-updating = S'està actualitzant… + +# USB section step by step guide +about-debugging-setup-usb-step-enable-dev-menu2 = Activeu el menú «Opcions per a desenvolupadors» en el dispositiu Android. + +# USB section step by step guide +about-debugging-setup-usb-step-enable-debug2 = Activeu la «Depuració USB» en el menú «Opcions per a desenvolupadors» de l'Android. + +# USB section step by step guide +about-debugging-setup-usb-step-enable-debug-firefox2 = Activeu la depuració USB en el Firefox en el dispositiu Android. + +# USB section step by step guide +about-debugging-setup-usb-step-plug-device = Connecteu el dispositiu Android a l'ordinador. + +# Text shown in the USB section of the setup page with a link to troubleshoot connection errors. +# The link goes to https://developer.mozilla.org/docs/Tools/Remote_Debugging/Debugging_over_USB +about-debugging-setup-usb-troubleshoot = Teniu problemes per connectar-vos al dispositiu USB? <a>Resolució de problemes</a> + +# Network section of the Setup page +about-debugging-setup-network = + .title = Ubicació de xarxa + +# Text shown in the Network section of the setup page with a link to troubleshoot connection errors. +# The link goes to https://developer.mozilla.org/en-US/docs/Tools/Remote_Debugging/Debugging_over_a_network +about-debugging-setup-network-troubleshoot = Teniu problemes per connectar-vos mitjançant la ubicació de xarxa? <a>Resolució de problemes</a> + +# Text of a button displayed after the network locations "Host" input. +# Clicking on it will add the new network location to the list. +about-debugging-network-locations-add-button = Afig + +# Text to display when there are no locations to show. +about-debugging-network-locations-empty-text = Encara no s'ha afegit cap ubicació de xarxa. + +# Text of the label for the text input that allows users to add new network locations in +# the Connect page. A host is a hostname and a port separated by a colon, as suggested by +# the input's placeholder "localhost:6080". +about-debugging-network-locations-host-input-label = Amfitrió + +# Text of a button displayed next to existing network locations in the Connect page. +# Clicking on it removes the network location from the list. +about-debugging-network-locations-remove-button = Elimina + +# Runtime Page strings + +# Below are the titles for the various categories of debug targets that can be found +# on "runtime" pages of about:debugging. +# Title of the temporary extensions category (only available for "This Firefox" runtime). +about-debugging-runtime-temporary-extensions = + .name = Extensions temporals +# Title of the extensions category. +about-debugging-runtime-extensions = + .name = Extensions +# Title of the tabs category. +about-debugging-runtime-tabs = + .name = Pestanyes +# Title of the service workers category. +about-debugging-runtime-service-workers = + .name = Processos de treball de servei +# Title of the shared workers category. +about-debugging-runtime-shared-workers = + .name = Processos de treball compartits +# Title of the other workers category. +about-debugging-runtime-other-workers = + .name = Altres processos de treball +# Title of the processes category. +about-debugging-runtime-processes = + .name = Processos + +# Label of the button opening the performance profiler panel in runtime pages for remote +# runtimes. +about-debugging-runtime-profile-button2 = Analitza el rendiment + +# This string is displayed in the runtime page if the current configuration of the +# target runtime is incompatible with service workers. "Learn more" points to MDN. +# https://developer.mozilla.org/en-US/docs/Tools/about%3Adebugging#Service_workers_not_compatible +about-debugging-runtime-service-workers-not-compatible = La configuració del navegador no és compatible amb els processos de treball de servei. <a>Més informació</a> + +# Displayed for runtime info in runtime pages. +# { $name } is brand name such as "Firefox Nightly" +# { $version } is version such as "64.0a1" +about-debugging-runtime-name = { $name } ({ $version }) + +# Text of a button displayed in Runtime pages for remote runtimes. +# Clicking on the button will close the connection to the runtime. +about-debugging-runtime-disconnect-button = Desconnecta + +# Title of a modal dialog displayed on remote runtime pages after clicking on the Profile Runtime button. +about-debugging-profiler-dialog-title2 = Analitzador de rendiment + +# Clicking on the header of a debug target category will expand or collapse the debug +# target items in the category. This text is used as ’title’ attribute of the header, +# to describe this feature. +about-debugging-collapse-expand-debug-targets = Redueix / amplia + +# Debug Targets strings + +# Displayed in the categories of "runtime" pages that don't have any debug target to +# show. Debug targets depend on the category (extensions, tabs, workers...). +about-debugging-debug-target-list-empty = De moment, cap. + +# Text of a button displayed next to debug targets of "runtime" pages. Clicking on this +# button will open a DevTools toolbox that will allow inspecting the target. +# A target can be an addon, a tab, a worker... +about-debugging-debug-target-inspect-button = Inspecciona + +# Text of a button displayed in the "This Firefox" page, in the Temporary Extension +# section. Clicking on the button will open a file picker to load a temporary extension +about-debugging-tmp-extension-install-button = Carrega un complement temporal… + +# Text of a button displayed for a temporary extension loaded in the "This Firefox" page. +# Clicking on the button will reload the extension. +about-debugging-tmp-extension-reload-button = Torna a carregar + +# Text of a button displayed for a temporary extension loaded in the "This Firefox" page. +# Clicking on the button will uninstall the extension and remove it from the page. +about-debugging-tmp-extension-remove-button = Elimina + +# Text displayed for extensions in "runtime" pages, before displaying a link the extension's +# manifest URL. +about-debugging-extension-manifest-url = + .label = URL de manifest + +# Text displayed for extensions in "runtime" pages, before displaying the extension's uuid. +# UUIDs look like b293e463-481e-5148-a487-5aaf7a130429 +about-debugging-extension-uuid = + .label = UUID intern + +# Text displayed for extensions (temporary extensions only) in "runtime" pages, before +# displaying the location of the temporary extension. +about-debugging-extension-location = + .label = Ubicació + +# Text displayed for extensions in "runtime" pages, before displaying the extension's ID. +# For instance "geckoprofiler@mozilla.com" or "{ed26ddcb-5611-4512-a89a-51b8db81cfb2}". +about-debugging-extension-id = + .label = ID d'extensió + +# This string is displayed as a label of the button that unregisters a service worker. +about-debugging-worker-action-unregister = Suprimeix el registre + +# Displayed for service workers in runtime pages that are currently running (service +# worker instance is active). +about-debugging-worker-status-running = S'està executant + +# Displayed for service workers in runtime pages that are registered but stopped. +about-debugging-worker-status-stopped = Parat + +# Displayed for service workers in runtime pages that are registering. +about-debugging-worker-status-registering = S'està registrant + +# Displayed for service workers in runtime pages, to label the scope of a worker +about-debugging-worker-scope = + .label = Àmbit + +# Displayed for service workers in runtime pages, to label the push service endpoint (url) +# of a worker +about-debugging-worker-push-service = + .label = Servei de transferència Push + +# Displayed as name for the Main Process debug target in the Processes category. Only for +# remote runtimes, if `devtools.aboutdebugging.process-debugging` is true. +about-debugging-main-process-name = Procés principal + +# Alt text used for the close icon of message component (warnings, errors and notifications). +about-debugging-message-close-icon = + .alt = Tanca el missatge + +# Label text used for the error details of message component. +about-debugging-message-details-label-error = Detalls de l'error + +# Label text used for the warning details of message component. +about-debugging-message-details-label-warning = Detalls de l'avís + +# Label text used for default state of details of message component. +about-debugging-message-details-label = Detalls |