Adding upstream version 1:2.30.2.upstream/1%2.30.2upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 247 insertions, 0 deletions

diff --git a/t/t0021/rot13-filter.pl b/t/t0021/rot13-filter.pl
new file mode 100644
index 0000000..7bb9376
--- /dev/null
+++ b/t/t0021/rot13-filter.pl
@@ -0,0 +1,247 @@
+#
+# Example implementation for the Git filter protocol version 2
+# See Documentation/gitattributes.txt, section "Filter Protocol"
+#
+# Usage: rot13-filter.pl [--always-delay] <log path> <capabilities>
+#
+# Log path defines a debug log file that the script writes to. The
+# subsequent arguments define a list of supported protocol capabilities
+# ("clean", "smudge", etc).
+#
+# When --always-delay is given all pathnames with the "can-delay" flag
+# that don't appear on the list bellow are delayed with a count of 1
+# (see more below).
+#
+# This implementation supports special test cases:
+# (1) If data with the pathname "clean-write-fail.r" is processed with
+#     a "clean" operation then the write operation will die.
+# (2) If data with the pathname "smudge-write-fail.r" is processed with
+#     a "smudge" operation then the write operation will die.
+# (3) If data with the pathname "error.r" is processed with any
+#     operation then the filter signals that it cannot or does not want
+#     to process the file.
+# (4) If data with the pathname "abort.r" is processed with any
+#     operation then the filter signals that it cannot or does not want
+#     to process the file and any file after that is processed with the
+#     same command.
+# (5) If data with a pathname that is a key in the DELAY hash is
+#     requested (e.g. "test-delay10.a") then the filter responds with
+#     a "delay" status and sets the "requested" field in the DELAY hash.
+#     The filter will signal the availability of this object after
+#     "count" (field in DELAY hash) "list_available_blobs" commands.
+# (6) If data with the pathname "missing-delay.a" is processed that the
+#     filter will drop the path from the "list_available_blobs" response.
+# (7) If data with the pathname "invalid-delay.a" is processed that the
+#     filter will add the path "unfiltered" which was not delayed before
+#     to the "list_available_blobs" response.
+#
+
+use 5.008;
+sub gitperllib {
+	# Git assumes that all path lists are Unix-y colon-separated ones. But
+	# when the Git for Windows executes the test suite, its MSYS2 Bash
+	# calls git.exe, and colon-separated path lists are converted into
+	# Windows-y semicolon-separated lists of *Windows* paths (which
+	# naturally contain a colon after the drive letter, so splitting by
+	# colons simply does not cut it).
+	#
+	# Detect semicolon-separated path list and handle them appropriately.
+
+	if ($ENV{GITPERLLIB} =~ /;/) {
+		return split(/;/, $ENV{GITPERLLIB});
+	}
+	return split(/:/, $ENV{GITPERLLIB});
+}
+use lib (gitperllib());
+use strict;
+use warnings;
+use IO::File;
+use Git::Packet;
+
+my $MAX_PACKET_CONTENT_SIZE = 65516;
+
+my $always_delay = 0;
+if ( $ARGV[0] eq '--always-delay' ) {
+	$always_delay = 1;
+	shift @ARGV;
+}
+
+my $log_file                = shift @ARGV;
+my @capabilities            = @ARGV;
+
+open my $debug, ">>", $log_file or die "cannot open log file: $!";
+
+my %DELAY = (
+	'test-delay10.a' => { "requested" => 0, "count" => 1 },
+	'test-delay11.a' => { "requested" => 0, "count" => 1 },
+	'test-delay20.a' => { "requested" => 0, "count" => 2 },
+	'test-delay10.b' => { "requested" => 0, "count" => 1 },
+	'missing-delay.a' => { "requested" => 0, "count" => 1 },
+	'invalid-delay.a' => { "requested" => 0, "count" => 1 },
+);
+
+sub rot13 {
+	my $str = shift;
+	$str =~ y/A-Za-z/N-ZA-Mn-za-m/;
+	return $str;
+}
+
+print $debug "START\n";
+$debug->flush();
+
+packet_initialize("git-filter", 2);
+
+my %remote_caps = packet_read_and_check_capabilities("clean", "smudge", "delay");
+packet_check_and_write_capabilities(\%remote_caps, @capabilities);
+
+print $debug "init handshake complete\n";
+$debug->flush();
+
+while (1) {
+	my ( $res, $command ) = packet_key_val_read("command");
+	if ( $res == -1 ) {
+		print $debug "STOP\n";
+		exit();
+	}
+	print $debug "IN: $command";
+	$debug->flush();
+
+	if ( $command eq "list_available_blobs" ) {
+		# Flush
+		packet_compare_lists([1, ""], packet_bin_read()) ||
+			die "bad list_available_blobs end";
+
+		foreach my $pathname ( sort keys %DELAY ) {
+			if ( $DELAY{$pathname}{"requested"} >= 1 ) {
+				$DELAY{$pathname}{"count"} = $DELAY{$pathname}{"count"} - 1;
+				if ( $pathname eq "invalid-delay.a" ) {
+					# Send Git a pathname that was not delayed earlier
+					packet_txt_write("pathname=unfiltered");
+				}
+				if ( $pathname eq "missing-delay.a" ) {
+					# Do not signal Git that this file is available
+				} elsif ( $DELAY{$pathname}{"count"} == 0 ) {
+					print $debug " $pathname";
+					packet_txt_write("pathname=$pathname");
+				}
+			}
+		}
+
+		packet_flush();
+
+		print $debug " [OK]\n";
+		$debug->flush();
+		packet_txt_write("status=success");
+		packet_flush();
+	} else {
+		my ( $res, $pathname ) = packet_key_val_read("pathname");
+		if ( $res == -1 ) {
+			die "unexpected EOF while expecting pathname";
+		}
+		print $debug " $pathname";
+		$debug->flush();
+
+		# Read until flush
+		my ( $done, $buffer ) = packet_txt_read();
+		while ( $buffer ne '' ) {
+			if ( $buffer eq "can-delay=1" ) {
+				if ( exists $DELAY{$pathname} and $DELAY{$pathname}{"requested"} == 0 ) {
+					$DELAY{$pathname}{"requested"} = 1;
+				} elsif ( !exists $DELAY{$pathname} and $always_delay ) {
+					$DELAY{$pathname} = { "requested" => 1, "count" => 1 };
+				}
+			} elsif ($buffer =~ /^(ref|treeish|blob)=/) {
+				print $debug " $buffer";
+			} else {
+				# In general, filters need to be graceful about
+				# new metadata, since it's documented that we
+				# can pass any key-value pairs, but for tests,
+				# let's be a little stricter.
+				die "Unknown message '$buffer'";
+			}
+
+			( $done, $buffer ) = packet_txt_read();
+		}
+		if ( $done == -1 ) {
+			die "unexpected EOF after pathname '$pathname'";
+		}
+
+		my $input = "";
+		{
+			binmode(STDIN);
+			my $buffer;
+			my $done = 0;
+			while ( !$done ) {
+				( $done, $buffer ) = packet_bin_read();
+				$input .= $buffer;
+			}
+			if ( $done == -1 ) {
+				die "unexpected EOF while reading input for '$pathname'";
+			}			
+			print $debug " " . length($input) . " [OK] -- ";
+			$debug->flush();
+		}
+
+		my $output;
+		if ( exists $DELAY{$pathname} and exists $DELAY{$pathname}{"output"} ) {
+			$output = $DELAY{$pathname}{"output"}
+		} elsif ( $pathname eq "error.r" or $pathname eq "abort.r" ) {
+			$output = "";
+		} elsif ( $command eq "clean" and grep( /^clean$/, @capabilities ) ) {
+			$output = rot13($input);
+		} elsif ( $command eq "smudge" and grep( /^smudge$/, @capabilities ) ) {
+			$output = rot13($input);
+		} else {
+			die "bad command '$command'";
+		}
+
+		if ( $pathname eq "error.r" ) {
+			print $debug "[ERROR]\n";
+			$debug->flush();
+			packet_txt_write("status=error");
+			packet_flush();
+		} elsif ( $pathname eq "abort.r" ) {
+			print $debug "[ABORT]\n";
+			$debug->flush();
+			packet_txt_write("status=abort");
+			packet_flush();
+		} elsif ( $command eq "smudge" and
+			exists $DELAY{$pathname} and
+			$DELAY{$pathname}{"requested"} == 1 ) {
+			print $debug "[DELAYED]\n";
+			$debug->flush();
+			packet_txt_write("status=delayed");
+			packet_flush();
+			$DELAY{$pathname}{"requested"} = 2;
+			$DELAY{$pathname}{"output"} = $output;
+		} else {
+			packet_txt_write("status=success");
+			packet_flush();
+
+			if ( $pathname eq "${command}-write-fail.r" ) {
+				print $debug "[WRITE FAIL]\n";
+				$debug->flush();
+				die "${command} write error";
+			}
+
+			print $debug "OUT: " . length($output) . " ";
+			$debug->flush();
+
+			while ( length($output) > 0 ) {
+				my $packet = substr( $output, 0, $MAX_PACKET_CONTENT_SIZE );
+				packet_bin_write($packet);
+				# dots represent the number of packets
+				print $debug ".";
+				if ( length($output) > $MAX_PACKET_CONTENT_SIZE ) {
+					$output = substr( $output, $MAX_PACKET_CONTENT_SIZE );
+				} else {
+					$output = "";
+				}
+			}
+			packet_flush();
+			print $debug " [OK]\n";
+			$debug->flush();
+			packet_flush();
+		}
+	}
+}