diff options
Diffstat (limited to 'Documentation/git-repack.txt')
| -rw-r--r-- | Documentation/git-repack.txt | 188 |
1 files changed, 188 insertions, 0 deletions
diff --git a/Documentation/git-repack.txt b/Documentation/git-repack.txt new file mode 100644 index 0000000..92f146d --- /dev/null +++ b/Documentation/git-repack.txt @@ -0,0 +1,188 @@ +git-repack(1) +============= + +NAME +---- +git-repack - Pack unpacked objects in a repository + + +SYNOPSIS +-------- +[verse] +'git repack' [-a] [-A] [-d] [-f] [-F] [-l] [-n] [-q] [-b] [--window=<n>] [--depth=<n>] [--threads=<n>] [--keep-pack=<pack-name>] + +DESCRIPTION +----------- + +This command is used to combine all objects that do not currently +reside in a "pack", into a pack. It can also be used to re-organize +existing packs into a single, more efficient pack. + +A pack is a collection of objects, individually compressed, with +delta compression applied, stored in a single file, with an +associated index file. + +Packs are used to reduce the load on mirror systems, backup +engines, disk storage, etc. + +OPTIONS +------- + +-a:: + Instead of incrementally packing the unpacked objects, + pack everything referenced into a single pack. + Especially useful when packing a repository that is used + for private development. Use + with `-d`. This will clean up the objects that `git prune` + leaves behind, but `git fsck --full --dangling` shows as + dangling. ++ +Note that users fetching over dumb protocols will have to fetch the +whole new pack in order to get any contained object, no matter how many +other objects in that pack they already have locally. ++ +Promisor packfiles are repacked separately: if there are packfiles that +have an associated ".promisor" file, these packfiles will be repacked +into another separate pack, and an empty ".promisor" file corresponding +to the new separate pack will be written. + +-A:: + Same as `-a`, unless `-d` is used. Then any unreachable + objects in a previous pack become loose, unpacked objects, + instead of being left in the old pack. Unreachable objects + are never intentionally added to a pack, even when repacking. + This option prevents unreachable objects from being immediately + deleted by way of being left in the old pack and then + removed. Instead, the loose unreachable objects + will be pruned according to normal expiry rules + with the next 'git gc' invocation. See linkgit:git-gc[1]. + +-d:: + After packing, if the newly created packs make some + existing packs redundant, remove the redundant packs. + Also run 'git prune-packed' to remove redundant + loose object files. + +-l:: + Pass the `--local` option to 'git pack-objects'. See + linkgit:git-pack-objects[1]. + +-f:: + Pass the `--no-reuse-delta` option to `git-pack-objects`, see + linkgit:git-pack-objects[1]. + +-F:: + Pass the `--no-reuse-object` option to `git-pack-objects`, see + linkgit:git-pack-objects[1]. + +-q:: + Pass the `-q` option to 'git pack-objects'. See + linkgit:git-pack-objects[1]. + +-n:: + Do not update the server information with + 'git update-server-info'. This option skips + updating local catalog files needed to publish + this repository (or a direct copy of it) + over HTTP or FTP. See linkgit:git-update-server-info[1]. + +--window=<n>:: +--depth=<n>:: + These two options affect how the objects contained in the pack are + stored using delta compression. The objects are first internally + sorted by type, size and optionally names and compared against the + other objects within `--window` to see if using delta compression saves + space. `--depth` limits the maximum delta depth; making it too deep + affects the performance on the unpacker side, because delta data needs + to be applied that many times to get to the necessary object. ++ +The default value for --window is 10 and --depth is 50. The maximum +depth is 4095. + +--threads=<n>:: + This option is passed through to `git pack-objects`. + +--window-memory=<n>:: + This option provides an additional limit on top of `--window`; + the window size will dynamically scale down so as to not take + up more than '<n>' bytes in memory. This is useful in + repositories with a mix of large and small objects to not run + out of memory with a large window, but still be able to take + advantage of the large window for the smaller objects. The + size can be suffixed with "k", "m", or "g". + `--window-memory=0` makes memory usage unlimited. The default + is taken from the `pack.windowMemory` configuration variable. + Note that the actual memory usage will be the limit multiplied + by the number of threads used by linkgit:git-pack-objects[1]. + +--max-pack-size=<n>:: + Maximum size of each output pack file. The size can be suffixed with + "k", "m", or "g". The minimum size allowed is limited to 1 MiB. + If specified, multiple packfiles may be created, which also + prevents the creation of a bitmap index. + The default is unlimited, unless the config variable + `pack.packSizeLimit` is set. + +-b:: +--write-bitmap-index:: + Write a reachability bitmap index as part of the repack. This + only makes sense when used with `-a` or `-A`, as the bitmaps + must be able to refer to all reachable objects. This option + overrides the setting of `repack.writeBitmaps`. This option + has no effect if multiple packfiles are created. + +--pack-kept-objects:: + Include objects in `.keep` files when repacking. Note that we + still do not delete `.keep` packs after `pack-objects` finishes. + This means that we may duplicate objects, but this makes the + option safe to use when there are concurrent pushes or fetches. + This option is generally only useful if you are writing bitmaps + with `-b` or `repack.writeBitmaps`, as it ensures that the + bitmapped packfile has the necessary objects. + +--keep-pack=<pack-name>:: + Exclude the given pack from repacking. This is the equivalent + of having `.keep` file on the pack. `<pack-name>` is the + pack file name without leading directory (e.g. `pack-123.pack`). + The option could be specified multiple times to keep multiple + packs. + +--unpack-unreachable=<when>:: + When loosening unreachable objects, do not bother loosening any + objects older than `<when>`. This can be used to optimize out + the write of any objects that would be immediately pruned by + a follow-up `git prune`. + +-k:: +--keep-unreachable:: + When used with `-ad`, any unreachable objects from existing + packs will be appended to the end of the packfile instead of + being removed. In addition, any unreachable loose objects will + be packed (and their loose counterparts removed). + +-i:: +--delta-islands:: + Pass the `--delta-islands` option to `git-pack-objects`, see + linkgit:git-pack-objects[1]. + +Configuration +------------- + +By default, the command passes `--delta-base-offset` option to +'git pack-objects'; this typically results in slightly smaller packs, +but the generated packs are incompatible with versions of Git older than +version 1.4.4. If you need to share your repository with such ancient Git +versions, either directly or via the dumb http protocol, then you +need to set the configuration variable `repack.UseDeltaBaseOffset` to +"false" and repack. Access from old Git versions over the native protocol +is unaffected by this option as the conversion is performed on the fly +as needed in that case. + +SEE ALSO +-------- +linkgit:git-pack-objects[1] +linkgit:git-prune-packed[1] + +GIT +--- +Part of the linkgit:git[1] suite |