summaryrefslogtreecommitdiffstats
path: root/Documentation/howto/revert-a-faulty-merge.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/howto/revert-a-faulty-merge.txt')
-rw-r--r--Documentation/howto/revert-a-faulty-merge.txt273
1 files changed, 273 insertions, 0 deletions
diff --git a/Documentation/howto/revert-a-faulty-merge.txt b/Documentation/howto/revert-a-faulty-merge.txt
new file mode 100644
index 0000000..19f59cc
--- /dev/null
+++ b/Documentation/howto/revert-a-faulty-merge.txt
@@ -0,0 +1,273 @@
+Date: Fri, 19 Dec 2008 00:45:19 -0800
+From: Linus Torvalds <torvalds@linux-foundation.org>, Junio C Hamano <gitster@pobox.com>
+Subject: Re: Odd merge behaviour involving reverts
+Abstract: Sometimes a branch that was already merged to the mainline
+ is later found to be faulty. Linus and Junio give guidance on
+ recovering from such a premature merge and continuing development
+ after the offending branch is fixed.
+Message-ID: <7vocz8a6zk.fsf@gitster.siamese.dyndns.org>
+References: <alpine.LFD.2.00.0812181949450.14014@localhost.localdomain>
+Content-type: text/asciidoc
+
+How to revert a faulty merge
+============================
+
+Alan <alan@clueserver.org> said:
+
+ I have a master branch. We have a branch off of that that some
+ developers are doing work on. They claim it is ready. We merge it
+ into the master branch. It breaks something so we revert the merge.
+ They make changes to the code. they get it to a point where they say
+ it is ok and we merge again.
+
+ When examined, we find that code changes made before the revert are
+ not in the master branch, but code changes after are in the master
+ branch.
+
+and asked for help recovering from this situation.
+
+The history immediately after the "revert of the merge" would look like
+this:
+
+ ---o---o---o---M---x---x---W
+ /
+ ---A---B
+
+where A and B are on the side development that was not so good, M is the
+merge that brings these premature changes into the mainline, x are changes
+unrelated to what the side branch did and already made on the mainline,
+and W is the "revert of the merge M" (doesn't W look M upside down?).
+IOW, `"diff W^..W"` is similar to `"diff -R M^..M"`.
+
+Such a "revert" of a merge can be made with:
+
+ $ git revert -m 1 M
+
+After the developers of the side branch fix their mistakes, the history
+may look like this:
+
+ ---o---o---o---M---x---x---W---x
+ /
+ ---A---B-------------------C---D
+
+where C and D are to fix what was broken in A and B, and you may already
+have some other changes on the mainline after W.
+
+If you merge the updated side branch (with D at its tip), none of the
+changes made in A or B will be in the result, because they were reverted
+by W. That is what Alan saw.
+
+Linus explains the situation:
+
+ Reverting a regular commit just effectively undoes what that commit
+ did, and is fairly straightforward. But reverting a merge commit also
+ undoes the _data_ that the commit changed, but it does absolutely
+ nothing to the effects on _history_ that the merge had.
+
+ So the merge will still exist, and it will still be seen as joining
+ the two branches together, and future merges will see that merge as
+ the last shared state - and the revert that reverted the merge brought
+ in will not affect that at all.
+
+ So a "revert" undoes the data changes, but it's very much _not_ an
+ "undo" in the sense that it doesn't undo the effects of a commit on
+ the repository history.
+
+ So if you think of "revert" as "undo", then you're going to always
+ miss this part of reverts. Yes, it undoes the data, but no, it doesn't
+ undo history.
+
+In such a situation, you would want to first revert the previous revert,
+which would make the history look like this:
+
+ ---o---o---o---M---x---x---W---x---Y
+ /
+ ---A---B-------------------C---D
+
+where Y is the revert of W. Such a "revert of the revert" can be done
+with:
+
+ $ git revert W
+
+This history would (ignoring possible conflicts between what W and W..Y
+changed) be equivalent to not having W or Y at all in the history:
+
+ ---o---o---o---M---x---x-------x----
+ /
+ ---A---B-------------------C---D
+
+and merging the side branch again will not have conflict arising from an
+earlier revert and revert of the revert.
+
+ ---o---o---o---M---x---x-------x-------*
+ / /
+ ---A---B-------------------C---D
+
+Of course the changes made in C and D still can conflict with what was
+done by any of the x, but that is just a normal merge conflict.
+
+On the other hand, if the developers of the side branch discarded their
+faulty A and B, and redone the changes on top of the updated mainline
+after the revert, the history would have looked like this:
+
+ ---o---o---o---M---x---x---W---x---x
+ / \
+ ---A---B A'--B'--C'
+
+If you reverted the revert in such a case as in the previous example:
+
+ ---o---o---o---M---x---x---W---x---x---Y---*
+ / \ /
+ ---A---B A'--B'--C'
+
+where Y is the revert of W, A' and B' are rerolled A and B, and there may
+also be a further fix-up C' on the side branch. `"diff Y^..Y"` is similar
+to `"diff -R W^..W"` (which in turn means it is similar to `"diff M^..M"`),
+and `"diff A'^..C'"` by definition would be similar but different from that,
+because it is a rerolled series of the earlier change. There will be a
+lot of overlapping changes that result in conflicts. So do not do "revert
+of revert" blindly without thinking..
+
+ ---o---o---o---M---x---x---W---x---x
+ / \
+ ---A---B A'--B'--C'
+
+In the history with rebased side branch, W (and M) are behind the merge
+base of the updated branch and the tip of the mainline, and they should
+merge without the past faulty merge and its revert getting in the way.
+
+To recap, these are two very different scenarios, and they want two very
+different resolution strategies:
+
+ - If the faulty side branch was fixed by adding corrections on top, then
+ doing a revert of the previous revert would be the right thing to do.
+
+ - If the faulty side branch whose effects were discarded by an earlier
+ revert of a merge was rebuilt from scratch (i.e. rebasing and fixing,
+ as you seem to have interpreted), then re-merging the result without
+ doing anything else fancy would be the right thing to do.
+ (See the ADDENDUM below for how to rebuild a branch from scratch
+ without changing its original branching-off point.)
+
+However, there are things to keep in mind when reverting a merge (and
+reverting such a revert).
+
+For example, think about what reverting a merge (and then reverting the
+revert) does to bisectability. Ignore the fact that the revert of a revert
+is undoing it - just think of it as a "single commit that does a lot".
+Because that is what it does.
+
+When you have a problem you are chasing down, and you hit a "revert this
+merge", what you're hitting is essentially a single commit that contains
+all the changes (but obviously in reverse) of all the commits that got
+merged. So it's debugging hell, because now you don't have lots of small
+changes that you can try to pinpoint which _part_ of it changes.
+
+But does it all work? Sure it does. You can revert a merge, and from a
+purely technical angle, Git did it very naturally and had no real
+troubles. It just considered it a change from "state before merge" to
+"state after merge", and that was it. Nothing complicated, nothing odd,
+nothing really dangerous. Git will do it without even thinking about it.
+
+So from a technical angle, there's nothing wrong with reverting a merge,
+but from a workflow angle it's something that you generally should try to
+avoid.
+
+If at all possible, for example, if you find a problem that got merged
+into the main tree, rather than revert the merge, try _really_ hard to
+bisect the problem down into the branch you merged, and just fix it, or
+try to revert the individual commit that caused it.
+
+Yes, it's more complex, and no, it's not always going to work (sometimes
+the answer is: "oops, I really shouldn't have merged it, because it wasn't
+ready yet, and I really need to undo _all_ of the merge"). So then you
+really should revert the merge, but when you want to re-do the merge, you
+now need to do it by reverting the revert.
+
+ADDENDUM
+
+Sometimes you have to rewrite one of a topic branch's commits *and* you can't
+change the topic's branching-off point. Consider the following situation:
+
+ P---o---o---M---x---x---W---x
+ \ /
+ A---B---C
+
+where commit W reverted commit M because it turned out that commit B was wrong
+and needs to be rewritten, but you need the rewritten topic to still branch
+from commit P (perhaps P is a branching-off point for yet another branch, and
+you want be able to merge the topic into both branches).
+
+The natural thing to do in this case is to checkout the A-B-C branch and use
+"rebase -i P" to change commit B. However this does not rewrite commit A,
+because "rebase -i" by default fast-forwards over any initial commits selected
+with the "pick" command. So you end up with this:
+
+ P---o---o---M---x---x---W---x
+ \ /
+ A---B---C <-- old branch
+ \
+ B'---C' <-- naively rewritten branch
+
+To merge A-B'-C' into the mainline branch you would still have to first revert
+commit W in order to pick up the changes in A, but then it's likely that the
+changes in B' will conflict with the original B changes re-introduced by the
+reversion of W.
+
+However, you can avoid these problems if you recreate the entire branch,
+including commit A:
+
+ A'---B'---C' <-- completely rewritten branch
+ /
+ P---o---o---M---x---x---W---x
+ \ /
+ A---B---C
+
+You can merge A'-B'-C' into the mainline branch without worrying about first
+reverting W. Mainline's history would look like this:
+
+ A'---B'---C'------------------
+ / \
+ P---o---o---M---x---x---W---x---M2
+ \ /
+ A---B---C
+
+But if you don't actually need to change commit A, then you need some way to
+recreate it as a new commit with the same changes in it. The rebase command's
+--no-ff option provides a way to do this:
+
+ $ git rebase [-i] --no-ff P
+
+The --no-ff option creates a new branch A'-B'-C' with all-new commits (all the
+SHA IDs will be different) even if in the interactive case you only actually
+modify commit B. You can then merge this new branch directly into the mainline
+branch and be sure you'll get all of the branch's changes.
+
+You can also use --no-ff in cases where you just add extra commits to the topic
+to fix it up. Let's revisit the situation discussed at the start of this howto:
+
+ P---o---o---M---x---x---W---x
+ \ /
+ A---B---C----------------D---E <-- fixed-up topic branch
+
+At this point, you can use --no-ff to recreate the topic branch:
+
+ $ git checkout E
+ $ git rebase --no-ff P
+
+yielding
+
+ A'---B'---C'------------D'---E' <-- recreated topic branch
+ /
+ P---o---o---M---x---x---W---x
+ \ /
+ A---B---C----------------D---E
+
+You can merge the recreated branch into the mainline without reverting commit W,
+and mainline's history will look like this:
+
+ A'---B'---C'------------D'---E'
+ / \
+ P---o---o---M---x---x---W---x---M2
+ \ /
+ A---B---C