summaryrefslogtreecommitdiffstats
path: root/ChangeLog
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-27 10:54:16 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-27 10:54:16 +0000
commit485f6ecd453d8a2fd8b9b9fadea03159d8b50797 (patch)
tree32451fa3cdd9321fb2591fada9891b2cb70a9cd1 /ChangeLog
parentInitial commit. (diff)
downloadgrub2-upstream.tar.xz
grub2-upstream.zip
Adding upstream version 2.06.upstream/2.06upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'ChangeLog')
-rw-r--r--ChangeLog13098
1 files changed, 13098 insertions, 0 deletions
diff --git a/ChangeLog b/ChangeLog
new file mode 100644
index 0000000..434754f
--- /dev/null
+++ b/ChangeLog
@@ -0,0 +1,13098 @@
+2021-06-08 Daniel Kiper <daniel.kiper@oracle.com>
+
+ Release 2.06
+
+2021-06-08 Daniel Kiper <daniel.kiper@oracle.com>
+
+ SECURITY: Add SECURITY file
+ The SECURITY file describes the GRUB project security policy.
+
+ It is based on https://github.com/wireapp/wire/blob/master/SECURITY.md
+
+2021-06-08 Daniel Kiper <daniel.kiper@oracle.com>
+
+ MAINTAINERS: Add MAINTAINERS file
+ The MAINTAINERS file provides basic information about the GRUB project
+ and its maintainers.
+
+2021-06-01 Dimitri John Ledkov <xnox@ubuntu.com>
+
+ grub-install: Add backup and restore
+ Refactor clean_grub_dir() to create a backup of all the files, instead
+ of just irrevocably removing them as the first action. If available,
+ register atexit() handler to restore the backup if errors occur before
+ point of no return, or remove the backup if everything was successful.
+ If atexit() is not available, the backup remains on disk for manual
+ recovery.
+
+ Some platforms defined a point of no return, i.e. after modules & core
+ images were updated. Failures from any commands after that stage are
+ ignored, and backup is cleaned up. For example, on EFI platforms update
+ is not reverted when efibootmgr fails.
+
+ Extra care is taken to ensure atexit() handler is only invoked by the
+ parent process and not any children forks. Some older GRUB codebases
+ can invoke parent atexit() hooks from forks, which can mess up the
+ backup.
+
+ This allows safer upgrades of MBR & modules, such that
+ modules/images/fonts/translations are consistent with MBR in case of
+ errors. For example accidental grub-install /dev/non-existent-disk
+ currently clobbers and upgrades modules in /boot/grub, despite not
+ actually updating any MBR.
+
+ This patch only handles backup and restore of files copied to /boot/grub.
+ This patch does not perform backup (or restoration) of MBR itself or
+ blocklists. Thus when installing i386-pc platform, corruption may still
+ occur with MBR and blocklists which will not be attempted to be
+ automatically recovered.
+
+ Also add modinfo.sh and *.efi to the cleanup/backup/restore code path,
+ to ensure it is also cleaned, backed up and restored.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-06-01 Dimitri John Ledkov <xnox@ubuntu.com>
+
+ osdep/unix/exec: Avoid atexit() handlers when child execvp() fails
+ The functions grub_util_exec_pipe() and grub_util_exec_pipe_stderr()
+ currently call execvp(). If the call fails for any reason, the child
+ currently calls exit(127). This in turn executes the parents
+ atexit() handlers from the forked child, and then the same handlers
+ are called again from parent. This is usually not desired, and can
+ lead to deadlocks, and undesired behavior. So, change the exit() calls
+ to _exit() calls to avoid calling atexit() handlers from child.
+
+ Fixes: e75cf4a58 (unix exec: avoid atexit handlers when child exits)
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-06-01 Jan (janneke) Nieuwenhuizen <janneke@gnu.org>
+
+ lib/i386/relocator64: Build fixes for i386
+ This fixes cross-compiling to x86 (e.g., the Hurd) from x86-linux of
+
+ grub-core/lib/i386/relocator64.S
+
+ This file has six sections that only build with a 64-bit assembler,
+ yet only the first two sections had support for a 32-bit assembler.
+ This patch completes this for the remaining sections.
+
+ To reproduce, update the GRUB source description in your local Guix
+ archive and run
+
+ ./pre-inst-env guix build --system=i686-linux --target=i586-pc-gnu grub
+
+ or install an x86 cross-build environment on x86-linux (32-bit!) and
+ configure to cross build and make, e.g., do something like
+
+ ./configure \
+ CC_FOR_BUILD=gcc \
+ --build=i686-unknown-linux-gnu \
+ --host=i586-pc-gnu
+ make
+
+ Additionally, remove a line with redundant spaces.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-06-01 Javier Martinez Canillas <javierm@redhat.com>
+
+ fs/xfs: Add needsrepair incompat feature support
+ The XFS now has an incompat feature flag to indicate that a filesystem
+ needs to be repaired. The Linux kernel refuses to mount the filesystem
+ that has it set and only the xfs_repair tool is able to clear that flag.
+
+ The GRUB doesn't have the concept of mounting filesystems and just
+ attempts to read the files. But it does some sanity checking before
+ attempting to read from the filesystem. Among the things which are tested,
+ is if the super block only has set of incompatible features flags that
+ are supported by GRUB. If it contains any flags that are not listed as
+ supported, reading the XFS filesystem fails.
+
+ Since the GRUB doesn't attempt to detect if the filesystem is inconsistent
+ nor replays the journal, the filesystem access is a best effort. For this
+ reason, ignore if the filesystem needs to be repaired and just print a debug
+ message. That way, if reading or booting fails later, the user is able to
+ figure out that the failures can be related to broken XFS filesystem.
+
+ Suggested-by: Eric Sandeen <esandeen@redhat.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-06-01 Carlos Maiolino <cmaiolino@redhat.com>
+
+ fs/xfs: Add bigtime incompat feature support
+ The XFS filesystem supports a bigtime feature to overcome y2038 problem.
+ This patch makes the GRUB able to support the XFS filesystems with this
+ feature enabled.
+
+ The XFS counter for the bigtime enabled timestamps starts at 0, which
+ translates to GRUB_INT32_MIN (Dec 31 20:45:52 UTC 1901) in the legacy
+ timestamps. The conversion to Unix timestamps is made before passing the
+ value to other GRUB functions.
+
+ For this to work properly, GRUB requires an access to flags2 field in the
+ XFS ondisk inode. So, the grub_xfs_inode structure has been updated to
+ cover full ondisk inode.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-06-01 Carlos Maiolino <cmaiolino@redhat.com>
+
+ fs: Use 64-bit type for filesystem timestamp
+ Some filesystems nowadays use 64-bit types for timestamps. So, update
+ grub_dirhook_info struct to use an grub_int64_t type to store mtime.
+ This also updates the grub_unixtime2datetime() function to receive
+ a 64-bit timestamp argument and do 64-bit-safe divisions.
+
+ All the remaining conversion from 32-bit to 64-bit should be safe, as
+ 32-bit to 64-bit attributions will be implicitly casted. The most
+ critical part in the 32-bit to 64-bit conversion is in the function
+ grub_unixtime2datetime() where it needs to deal with the 64-bit type.
+ So, for that, the grub_divmod64() helper has been used.
+
+ These changes enables the GRUB to support dates beyond y2038.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-05-28 Javier Martinez Canillas <javierm@redhat.com>
+
+ types: Define PRI{x,d}GRUB_INT{32,64}_T format specifiers
+ There are already PRI*_T constants defined for unsigned integers but not
+ for signed integers. Add format specifiers for the latter.
+
+ Suggested-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-05-28 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+
+ kern/efi/sb: Remove duplicate efi_shim_lock_guid variable
+ The efi_shim_lock_guid local variable and shim_lock_guid global variable
+ have the same GUID value. Only the latter is retained.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-05-10 Javier Martinez Canillas <javierm@redhat.com>
+
+ util/mkimage: Fix wrong PE32+ section sizes for some arches
+ The commit f60ba9e5945 (util/mkimage: Refactor section setup to use a helper)
+ added a helper function to setup PE sections. But it also changed how the
+ raw data offsets were calculated since all the section sizes are aligned.
+ However, for some platforms, i.e ia64-efi and arm64-efi, the kernel image
+ size is not aligned using the section alignment. This leads to the situation
+ in which the mods section offset in its PE section header does not match its
+ real placement in the PE file. So, finally the GRUB is not able to locate
+ and load built-in modules.
+
+ The problem surfaces on ia64-efi and arm64-efi because both platforms
+ require additional relocation data which is added behind .bss section.
+ So, we have to add some padding behind this extra data to make the
+ beginning of mods section properly aligned in the PE file. Fix it by
+ aligning the kernel_size to the section alignment. That makes the sizes
+ and offsets in the PE section headers to match relevant sections in the
+ PE32+ binary file.
+
+ Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
+ Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-05-10 Daniel Kiper <daniel.kiper@oracle.com>
+
+ term/terminfo: Fix the terminfo command help and documentation
+ Additionally, fix the terminfo spelling mistake in
+ the GRUB development documentation.
+
+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
+
+2021-05-10 Daniel Kiper <daniel.kiper@oracle.com>
+
+ i18n: Align N_() formatting with the rest of GRUB code
+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
+
+2021-05-10 Daniel Kiper <daniel.kiper@oracle.com>
+
+ i18n: Format large integers before the translation message - take 2
+ This is an additional fix which has been missing from the commit 837fe48de
+ (i18n: Format large integers before the translation message).
+
+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
+
+2021-04-13 Miguel Ángel Arruga Vivas <rosen644835@gmail.com>
+
+ i18n: Format large integers before the translation message
+ The GNU gettext only supports the ISO C99 macros for integral
+ types. If there is a need to use unsupported formatting macros,
+ e.g. PRIuGRUB_UINT64_T, according to [1] the number to a string
+ conversion should be separated from the code printing message
+ requiring the internationalization. So, the function grub_snprintf()
+ is used to print the numeric values to an intermediate buffer and
+ the internationalized message contains a string format directive.
+
+ [1] https://www.gnu.org/software/gettext/manual/html_node/Preparing-Strings.html#No-string-concatenation
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-04-12 Daniel Axtens <dja@axtens.net>
+
+ video/fb/fbfill: Use unsigned integers for width/height
+ Since commit 7ce3259f67ac (video/fb/fbfill: Fix potential integer
+ overflow), clang builds of grub-emu have failed with messages like:
+
+ /usr/bin/ld: libgrubmods.a(libgrubmods_a-fbfill.o): in function `grub_video_fbfill_direct24':
+ fbfill.c:(.text+0x28e): undefined reference to `__muloti4'
+
+ This appears to be due to a weird quirk in how clang compiles
+
+ grub_mul(dst->mode_info->bytes_per_pixel, width, &rowskip)
+
+ which is grub_mul(unsigned int, int, &grub_size_t).
+
+ It looks like clang somewhere promotes everything to 128-bit maths
+ before ultimately reducing down to 64 bit for grub_size_t. I think
+ this is because width is signed, and indeed converting width to an
+ unsigned int makes the problem go away.
+
+ This conversion also makes more sense generally:
+ - the caller of all the fbfill_directN functions is
+ grub_video_fb_fill_dispatch() and it takes width and height as
+ unsigned ints already,
+ - it doesn't make sense to fill a negative width or height.
+
+ Convert the width and height arguments and associated loop counters
+ to unsigned ints.
+
+ Fixes: 7ce3259f67ac (video/fb/fbfill: Fix potential integer overflow)
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-04-12 Glenn Washburn <development@efficientek.com>
+
+ docs: Conform badmem and cutmem description indentations with other commands
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+ docs: Add note to cryptomount that UUIDs should be specified without dashes
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-04-12 Aru Sahni <aru@arusahni.net>
+
+ templates: Fix user-facing typo with an incorrect use of "it's"
+ Since the possessive form of "it" is being used, the apostrophe must be omitted.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-04-12 Colin Watson <cjwatson@debian.org>
+
+ buffer: Sync up out-of-range error message
+ The messages associated with other similar GRUB_ERR_OUT_OF_RANGE errors
+ were lacking the trailing full stop. Syncing up the strings saves a small
+ amount of precious core image space on i386-pc.
+
+ DOWN: obj/i386-pc/grub-core/kernel.img (31740 > 31708) - change: -32
+ DOWN: i386-pc core image (biosdisk ext2 part_msdos) (27453 > 27452) - change: -1
+ DOWN: i386-pc core image (biosdisk ext2 part_msdos diskfilter mdraid09) (32367 > 32359) - change: -8
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-04-12 Glenn Washburn <development@efficientek.com>
+
+ usb/usbhub: Use GRUB_USB_MAX_CONF macro instead of literal in hub for maximum configs
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-04-12 Daniel Drake <drake@endlessm.com>
+
+ fs/minix: Avoid mistakenly probing ext2 filesystems
+ The ext2 (and ext3, ext4) filesystems write the number of free inodes to
+ location 0x410.
+
+ On a MINIX filesystem, that same location is used for the MINIX superblock
+ magic number.
+
+ If the number of free inodes on an ext2 filesystem is equal to any
+ of the four MINIX superblock magic values plus any multiple of 65536,
+ GRUB's MINIX filesystem code will probe it as a MINIX filesystem.
+
+ In the case of an OS using ext2 as the root filesystem, since there will
+ ordinarily be some amount of file creation and deletion on every bootup,
+ it effectively means that this situation has a 1:16384 chance of being hit
+ on every reboot.
+
+ This will cause GRUB's filesystem probing code to mistakenly identify an
+ ext2 filesystem as MINIX. This can be seen by e.g. "search --label"
+ incorrectly indicating that no such ext2 partition with matching label
+ exists, whereas in fact it does.
+
+ After spotting the rough cause of the issue I was facing here, I borrowed
+ much of the diagnosis/explanation from meierfra who found and investigated
+ the same issue in util-linux in 2010:
+
+ https://bugs.launchpad.net/ubuntu/+source/util-linux/+bug/518582
+
+ This was fixed in util-linux by having the MINIX code check for the
+ ext2 magic. Do the same here.
+
+ Reviewed-by: Derek Foreman <derek@endlessos.org>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-12 Daniel Kiper <daniel.kiper@oracle.com>
+
+ Release 2.06~rc1
+
+2021-03-11 Ard Biesheuvel <ard.biesheuvel@arm.com>
+
+ arm/linux: Fix ARM Linux header layout
+ The hdr_offset member of the ARM Linux image header appears at
+ offset 0x3c, matching the PE/COFF spec's placement of the COFF
+ header offset in the MS-DOS header. We're currently off by four,
+ so fix that.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-10 Glenn Washburn <development@efficientek.com>
+
+ style: Format string macro should have a space between quotes
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-10 Glenn Washburn <development@efficientek.com>
+
+ grub/err: Do compile-time format string checking on grub_error()
+ This should help prevent format string errors and thus improve the quality
+ of error reporting.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-10 Glenn Washburn <development@efficientek.com>
+
+ fs/zfs/zfs: Use format code "%llu" for 64-bit uint bp->blk_prop in grub_error()
+ This is a temporary, less-intrusive change to get the build to success with
+ compiler format string checking turned on. There is a better fix which
+ addresses this issue, but it needs more testing. Use this change so that
+ format string checking on grub_error() can be turned on until the better
+ change is fully tested.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-10 Glenn Washburn <development@efficientek.com>
+
+ fs/hfsplus: Use format code PRIuGRUB_UINT64_T for 64-bit typed fileblock in grub_error()
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-10 Glenn Washburn <development@efficientek.com>
+
+ dl/elf: Use format code PRIxGRUB_UINT64_T for 64-bit arg in grub_error()
+ The macro ELF_R_TYPE does not change the underlying type. Here its argument
+ is a 64-bit Elf64_Xword. Make sure the format code matches.
+
+ For the RISC-V architecture, rel->r_info could be either Elf32_Xword or
+ Elf64_Xword depending on if 32 or 64-bit RISC-V is being built. So cast
+ to 64-bit value regardless.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-10 Glenn Washburn <development@efficientek.com>
+
+ disk/ata: Use format code PRIxGRUB_UINT64_T for 64-bit uint argument in grub_error()
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-10 Glenn Washburn <development@efficientek.com>
+
+ loader/i386/pc/linux: Use PRI* macros to get correct format string code across architectures
+ Also remove casting of format string args so that the architecture dependent
+ type is preserved.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-10 Glenn Washburn <development@efficientek.com>
+
+ kern/efi/mm: Format string error in grub_error()
+ The second format string argument, GRUB_EFI_MAX_USABLE_ADDRESS, is a macro
+ to a number literal. However, depending on what the target architecture, the
+ type can be 32 or 64 bits. Cast to a 64-bit integer. Also, change the
+ format string literals "%llx" to use PRIxGRUB_UINT64_T.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-10 Glenn Washburn <development@efficientek.com>
+
+ commands/pgp: Format code for grub_error() is incorrect
+ The format code is for a 32-bit int, but the argument, keyid, is declared as
+ a 64 bit int. The comment above says keyid is 32-bit. I'm not sure if the
+ comment or declaration is wrong, so force the display of a 64-bit int for now.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-10 Glenn Washburn <development@efficientek.com>
+
+ grub_error: Use format code PRIuGRUB_SIZE for variables of type grub_size_t
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-10 Glenn Washburn <development@efficientek.com>
+
+ disk/dmraid_nvidia: Format string error in grub_error()
+ The grub_error() has a format string expecting two arguments, but only one
+ provided. According to the comments in the struct grub_nv_super definition,
+ the version field looks like a version number where major.minor is encoded
+ as each a byte in the two-byte short.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-10 Glenn Washburn <development@efficientek.com>
+
+ video/bochs: grub_error() format string add missing format code
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-10 Glenn Washburn <development@efficientek.com>
+
+ parttool/msdospart: grub_error() missing format string argument
+ Its obvious from the error message that the variable named "type" was
+ accidentally omitted.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-10 Glenn Washburn <development@efficientek.com>
+
+ misc: Format string for grub_error() should be a literal
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-10 Philip Müller <philm@manjaro.org>
+
+ templates: Properly disable the os-prober by default
+ This patch does the following:
+ - really disables os-prober by default in the util/grub-mkconfig.in
+ by setting GRUB_DISABLE_OS_PROBER to true,
+ - fixes the logic in the util/grub.d/30_os-prober.in,
+ - updates the grub_warn() lines.
+
+ Reason for the code shuffling in the util/grub-mkconfig.in:
+
+ The default was GRUB_DISABLE_OS_PROBER=false if you don't set
+ GRUB_DISABLE_OS_PROBER at all. To prevent os-prober from starting we
+ have to set it by default to true and shuffle GRUB_DISABLE_OS_PROBER to
+ code section, which is executed by the script. However we still give an
+ option to the user to overwrite it with false, if he wants to execute
+ os-prober after all.
+
+ Fixes: e3464147 (templates: Disable the os-prober by default)
+
+ Reported-by: Didier Spaier <didier@slint.fr>
+ Reported-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
+ Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-10 Michael Chang <mchang@suse.com>
+
+ kern/efi/sb: Add chainloaded image as shim's verifiable object
+ While attempting to dual boot Microsoft Windows with UEFI chainloader,
+ it failed with below error when UEFI Secure Boot was enabled:
+
+ error ../../grub-core/kern/verifiers.c:119:verification requested but
+ nobody cares: /EFI/Microsoft/Boot/bootmgfw.efi.
+
+ It is a regression, as previously it worked without any problem.
+
+ It turns out chainloading PE image has been locked down by commit
+ 578c95298 (kern: Add lockdown support). However, we should consider it
+ as verifiable object by shim to allow booting in UEFI Secure Boot mode.
+ The chainloaded PE image could also have trusted signature created by
+ vendor with their pubkey cert in db. For that matters it's usage should
+ not be locked down under UEFI Secure Boot, and instead shim should be
+ allowed to validate a PE binary signature before running it.
+
+ Fixes: 578c95298 (kern: Add lockdown support)
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-10 Glenn Washburn <development@efficientek.com>
+
+ disk/pata: Suppress error message "no device connected"
+ This error message comes from the grub_print_error() in
+ grub_pata_device_initialize(), which does not pass on the error, and is
+ raised in check_device(). The function check_device() needs to return this
+ as an error because check_device() is also used in grub_pata_open(), which
+ does pass on this error to indicate that the device can not be used.
+
+ This is actually not an error when displayed by grub_pata_device_initialize()
+ because it just indicates that there are no pata devices seen. This may be
+ confusing to end users who do not have pata devices yet are loading the
+ pata module (perhaps implicitly via nativedisk). This also causes unnecessary
+ output which may need to be accounted for in functional testing.
+
+ Instead print to the debug log when check_device() raises this "error" and
+ pop the error from the error stack. If there is another error on the stack
+ then print the error stack as those should be real errors.
+
+ Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-10 Yi Zhao <yi.zhao@windriver.com>
+
+ fs/ext2: Fix a file not found error when a symlink filesize is equal to 60
+ We encountered a file not found error when the symlink filesize is
+ equal to 60:
+
+ $ ls -l initrd
+ lrwxrwxrwx 1 root root 60 Jan 6 16:37 initrd -> secure-core-image-initramfs-5.10.2-yoctodev-standard.cpio.gz
+
+ When booting, we got the following error in the GRUB:
+
+ error: file `/initrd' not found
+
+ The root cause is that the size of diro->inode.symlink is equal to 60
+ and a symlink name has to be terminated with NUL there. So, if the
+ symlink filesize is exactly 60 then it is also stored in a separate
+ block rather than in the inode itself.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+
+ loader/i386/linux: Do not use grub_le_to_cpu32() for relocatable variable
+ The relocatable variable is defined as grub_uint8_t. Relevant
+ member in setup_header structure is also defined as one byte
+ in Linux boot protocol. By semantic definition it is a bool type.
+ It is not appropriate to treat it as a four bytes. This patch
+ fixes the issue.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+
+ loader/i386/linux: Remove redundant code from in grub_cmd_linux()
+ The preferred_address has been assigned to GRUB_LINUX_BZIMAGE_ADDR
+ during initialization in grub_cmd_linux(). The assignment here
+ is redundant and should be removed.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Heinrich Schuchardt <xypron.glpk@gmx.de>
+
+ efi: The device-tree must be in EfiACPIReclaimMemory
+ According to the Embedded Base Boot Requirements (EBBR) specification the
+ device-tree passed to Linux as a configuration table must reside in
+ EfiACPIReclaimMemory.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Heinrich Schuchardt <xypron.glpk@gmx.de>
+
+ commands/efi/lsefisystab: Add short text for EFI_RT_PROPERTIES_TABLE_GUID
+ UEFI specification 2.8 errata B introduced the EFI_RT_PROPERTIES_TABLE
+ describing the services available at runtime.
+
+ The lsefisystab command is used to display installed EFI configuration
+ tables. Currently it only shows the GUID but not a short text for the
+ new table.
+
+ Provide a short text for the EFI_RT_PROPERTIES_TABLE_GUID.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Petr Vorel <pvorel@suse.cz>
+
+ docs/luks2: Mention key derivation function support
+ To give users hint why Argon2, the default in cryptsetup for LUKS2, does
+ not work.
+
+ Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
+ Reviewed-by: Patrick Steinhardt <ps@pks.im>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Derek Foreman <derek@endlessos.org>
+
+ commands/file: Fix array/enum desync
+ The commit f1957dc8a (RISC-V: Add to build system) added two entries to
+ the options array, but only 1 entry to the enum. This resulted in
+ everything after the insertion point being off by one.
+
+ This broke at least the "file --is-hibernated-hiberfil" command.
+
+ Bring the two back in sync by splitting the IS_RISCV_EFI enum entry into
+ two, as is done for other architectures.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Marco A Benatto <mbenatto@redhat.com>
+
+ kern/mm: Fix grub_debug_calloc() compilation error
+ Fix compilation error due to missing parameter to
+ grub_printf() when MM_DEBUG is defined.
+
+ Fixes: 64e26162e (calloc: Make sure we always have an overflow-checking calloc() available)
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Alex Burmashev <alexander.burmashev@oracle.com>
+
+ templates: Disable the os-prober by default
+ The os-prober is enabled by default what may lead to potentially
+ dangerous use cases and borderline opening attack vectors. This
+ patch disables the os-prober, adds warning messages and updates
+ GRUB_DISABLE_OS_PROBER configuration option documentation. This
+ way we make it clear that the os-prober usage is not recommended.
+
+ Simplistic nature of this change allows downstream vendors, who
+ really want os-prober to be enabled out of the box in their
+ relevant products, easily revert to it's old behavior.
+
+ Reported-by: NyankoSec (<nyanko@10x.moe>, https://twitter.com/NyankoSec),
+ working with SSD Secure Disclosure
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Thomas Frauendorfer | Miray Software <tf@miray.de>
+
+ gfxmenu/gui: Check printf() format in the gui_progress_bar and gui_label
+ The gui_progress_bar and gui_label components can display the timeout
+ value. The format string can be set through a theme file. This patch
+ adds a validation step to the format string.
+
+ If a user loads a theme file into the GRUB without this patch then
+ a GUI label with the following settings
+
+ + label {
+ ...
+ id = "__timeout__"
+ text = "%s"
+ }
+
+ will interpret the current timeout value as string pointer and print the
+ memory at that position on the screen. It is not desired behavior.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Thomas Frauendorfer | Miray Software <tf@miray.de>
+
+ kern/misc: Add function to check printf() format against expected format
+ The grub_printf_fmt_check() function parses the arguments of an untrusted
+ printf() format and an expected printf() format and then compares the
+ arguments counts and arguments types. The arguments count in the untrusted
+ format string must be less or equal to the arguments count in the expected
+ format string and both arguments types must match.
+
+ To do this the parse_printf_arg_fmt() helper function is extended in the
+ following way:
+
+ 1. Add a return value to report errors to the grub_printf_fmt_check().
+
+ 2. Add the fmt_check argument to enable stricter format verification:
+ - the function expects that arguments definitions are always
+ terminated by a supported conversion specifier.
+ - positional parameters, "$", are not allowed, as they cannot be
+ validated correctly with the current implementation. For example
+ "%s%1$d" would assign the first args entry twice while leaving the
+ second one unchanged.
+ - Return an error if preallocated space in args is too small and
+ allocation fails for the needed size. The grub_printf_fmt_check()
+ should verify all arguments. So, if validation is not possible for
+ any reason it should return an error.
+ This also adds a case entry to handle "%%", which is the escape
+ sequence to print "%" character.
+
+ 3. Add the max_args argument to check for the maximum allowed arguments
+ count in a printf() string. This should be set to the arguments count
+ of the expected format. Then the parse_printf_arg_fmt() function will
+ return an error if the arguments count is exceeded.
+
+ The two additional arguments allow us to use parse_printf_arg_fmt() in
+ printf() and grub_printf_fmt_check() calls.
+
+ When parse_printf_arg_fmt() is used by grub_printf_fmt_check() the
+ function parse user provided untrusted format string too. So, in
+ that case it is better to be too strict than too lenient.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Thomas Frauendorfer | Miray Software <tf@miray.de>
+
+ kern/misc: Add STRING type for internal printf() format handling
+ Set printf() argument type for "%s" to new type STRING. This is in
+ preparation for a follow up patch to compare a printf() format string
+ against an expected printf() format string.
+
+ For "%s" the corresponding printf() argument is dereferenced as pointer
+ while all other argument types are defined as integer value. However,
+ when validating a printf() format it is necessary to differentiate "%s"
+ from "%p" and other integers. So, let's do that.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Thomas Frauendorfer | Miray Software <tf@miray.de>
+
+ kern/misc: Split parse_printf_args() into format parsing and va_list handling
+ This patch is preparing for a follow up patch which will use
+ the format parsing part to compare the arguments in a printf()
+ format from an external source against a printf() format with
+ expected arguments.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Dimitri John Ledkov <xnox@ubuntu.com>
+
+ shim_lock: Only skip loading shim_lock verifier with explicit consent
+ Commit 32ddc42c (efi: Only register shim_lock verifier if shim_lock
+ protocol is found and SB enabled) reintroduced CVE-2020-15705 which
+ previously only existed in the out-of-tree linuxefi patches and was
+ fixed as part of the BootHole patch series.
+
+ Under Secure Boot enforce loading shim_lock verifier. Allow skipping
+ shim_lock verifier if SecureBoot/MokSBState EFI variables indicate
+ skipping validations, or if GRUB image is built with --disable-shim-lock.
+
+ Fixes: 132ddc42c (efi: Only register shim_lock verifier if shim_lock
+ protocol is found and SB enabled)
+ Fixes: CVE-2020-15705
+ Fixes: CVE-2021-3418
+
+ Reported-by: Dimitri John Ledkov <xnox@ubuntu.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Dimitri John Ledkov <xnox@ubuntu.com>
+
+ grub-install-common: Add --sbat option
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Peter Jones <pjones@redhat.com>
+
+ util/mkimage: Add an option to import SBAT metadata into a .sbat section
+ Add a --sbat option to the grub-mkimage tool which allows us to import
+ an SBAT metadata formatted as a CSV file into a .sbat section of the
+ EFI binary.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Peter Jones <pjones@redhat.com>
+
+ util/mkimage: Refactor section setup to use a helper
+ Add a init_pe_section() helper function to setup PE sections. This makes
+ the code simpler and easier to read.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Peter Jones <pjones@redhat.com>
+
+ util/mkimage: Improve data_size value calculation
+ According to "Microsoft Portable Executable and Common Object File Format
+ Specification", the Optional Header SizeOfInitializedData field contains:
+
+ Size of the initialized data section, or the sum of all such sections if
+ there are multiple data sections.
+
+ Make this explicit by adding the GRUB kernel data size to the sum of all
+ the modules sizes. The ALIGN_UP() is not required by the PE spec but do
+ it to avoid alignment issues.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Peter Jones <pjones@redhat.com>
+
+ util/mkimage: Reorder PE optional header fields set-up
+ This makes the PE32 and PE32+ header fields set-up easier to follow by
+ setting them closer to the initialization of their related sections.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Peter Jones <pjones@redhat.com>
+
+ util/mkimage: Unify more of the PE32 and PE32+ header set-up
+ There's quite a bit of code duplication in the code that sets the optional
+ header for PE32 and PE32+. The two are very similar with the exception of
+ a few fields that have type grub_uint64_t instead of grub_uint32_t.
+
+ Factor out the common code and add a PE_OHDR() macro that simplifies the
+ set-up and make the code more readable.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Peter Jones <pjones@redhat.com>
+
+ util/mkimage: Always use grub_host_to_target32() to initialize PE stack and heap stuff
+ This change does not impact final result of initialization itself.
+ However, it eases PE code unification in subsequent patches.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Peter Jones <pjones@redhat.com>
+
+ util/mkimage: Use grub_host_to_target32() instead of grub_cpu_to_le32()
+ The latter doesn't take into account the target image endianness. There is
+ a grub_cpu_to_le32_compile_time() but no compile time variant for function
+ grub_host_to_target32(). So, let's keep using the other one for this case.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Javier Martinez Canillas <javierm@redhat.com>
+
+ util/mkimage: Remove unused code to add BSS section
+ The code is compiled out so there is no reason to keep it.
+
+ Additionally, don't set bss_size field since we do not add a BSS section.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Chris Coulson <chris.coulson@canonical.com>
+
+ kern/efi: Add initial stack protector implementation
+ It works only on UEFI platforms but can be quite easily extended to
+ others architectures and platforms if needed.
+
+ Reviewed-by: Marco A Benatto <mbenatto@redhat.com>
+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
+
+2021-03-02 Chris Coulson <chris.coulson@canonical.com>
+
+ kern/parser: Fix a stack buffer overflow
+ grub_parser_split_cmdline() expands variable names present in the supplied
+ command line in to their corresponding variable contents and uses a 1 kiB
+ stack buffer for temporary storage without sufficient bounds checking. If
+ the function is called with a command line that references a variable with
+ a sufficiently large payload, it is possible to overflow the stack
+ buffer via tab completion, corrupt the stack frame and potentially
+ control execution.
+
+ Fixes: CVE-2020-27749
+
+ Reported-by: Chris Coulson <chris.coulson@canonical.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Chris Coulson <chris.coulson@canonical.com>
+
+ kern/buffer: Add variable sized heap buffer
+ Add a new variable sized heap buffer type (grub_buffer_t) with simple
+ operations for appending data, accessing the data and maintaining
+ a read cursor.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Chris Coulson <chris.coulson@canonical.com>
+
+ kern/parser: Refactor grub_parser_split_cmdline() cleanup
+ Introduce a common function epilogue used for cleaning up on all
+ return paths, which will simplify additional error handling to be
+ introduced in a subsequent commit.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Chris Coulson <chris.coulson@canonical.com>
+
+ kern/parser: Introduce terminate_arg() helper
+ process_char() and grub_parser_split_cmdline() use similar code for
+ terminating the most recent argument. Add a helper function for this.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Chris Coulson <chris.coulson@canonical.com>
+
+ kern/parser: Introduce process_char() helper
+ grub_parser_split_cmdline() iterates over each command line character.
+ In order to add error checking and to simplify the subsequent error
+ handling, split the character processing in to a separate function.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Chris Coulson <chris.coulson@canonical.com>
+
+ kern/parser: Fix a memory leak
+ The getline() function supplied to grub_parser_split_cmdline() returns
+ a newly allocated buffer and can be called multiple times, but the
+ returned buffer is never freed.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ fs/btrfs: Squash some uninitialized reads
+ We need to check errors before calling into a function that uses the result.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ fs/btrfs: Validate the number of stripes/parities in RAID5/6
+ This prevents a divide by zero if nstripes == nparities, and
+ also prevents propagation of invalid values if nstripes ends up
+ less than nparities.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ disk/lvm: Do not allow a LV to be it's own segment's node's LV
+ This prevents infinite recursion in the diskfilter verification code.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ disk/lvm: Sanitize rlocn->offset to prevent wild read
+ rlocn->offset is read directly from disk and added to the metadatabuf
+ pointer to create a pointer to a block of metadata. It's a 64-bit
+ quantity so as long as you don't overflow you can set subsequent
+ pointers to point anywhere in memory.
+
+ Require that rlocn->offset fits within the metadata buffer size.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ disk/lvm: Do not overread metadata
+ We could reach the end of valid metadata and not realize, leading to
+ some buffer overreads. Check if we have reached the end and bail.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ disk/lvm: Do not crash if an expected string is not found
+ Clean up a bunch of cases where we could have strstr() fail and lead to
+ us dereferencing NULL.
+
+ We'll still leak memory in some cases (loops don't clean up allocations
+ from earlier iterations if a later iteration fails) but at least we're
+ not crashing.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ disk/lvm: Bail on missing PV list
+ There's an if block for the presence of "physical_volumes {", but if
+ that block is absent, then p remains NULL and a NULL-deref will result
+ when looking for logical volumes.
+
+ It doesn't seem like LVM makes sense without physical volumes, so error
+ out rather than crashing.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ disk/lvm: Don't blast past the end of the circular metadata buffer
+ This catches at least some OOB reads, and it's possible I suppose that
+ if 2 * mda_size is less than GRUB_LVM_MDA_HEADER_SIZE it might catch some
+ OOB writes too (although that hasn't showed up as a crash in fuzzing yet).
+
+ It's a bit ugly and I'd appreciate better suggestions.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ disk/lvm: Don't go beyond the end of the data we read from disk
+ We unconditionally trusted offset_xl from the LVM label header, even if
+ it told us that the PV header/disk locations were way off past the end
+ of the data we read from disk.
+
+ Require that the offset be sane, fixing an OOB read and crash.
+
+ Fixes: CID 314367, CID 314371
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ io/gzio: Zero gzio->tl/td in init_dynamic_block() if huft_build() fails
+ If huft_build() fails, gzio->tl or gzio->td could contain pointers that
+ are no longer valid. Zero them out.
+
+ This prevents a double free when grub_gzio_close() comes through and
+ attempts to free them again.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ io/gzio: Catch missing values in huft_build() and bail
+ In huft_build(), "v" is a table of values in order of bit length.
+ The code later (when setting up table entries in "r") assumes that all
+ elements of this array corresponding to a code are initialized and less
+ than N_MAX. However, it doesn't enforce this.
+
+ With sufficiently manipulated inputs (e.g. from fuzzing), there can be
+ elements of "v" that are not filled. Therefore a lookup into "e" or "d"
+ will use an uninitialized value. This can lead to an invalid/OOB read on
+ those values, often leading to a crash.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ io/gzio: Add init_dynamic_block() clean up if unpacking codes fails
+ init_dynamic_block() didn't clean up gzio->tl and td in some error
+ paths. This left td pointing to part of tl. Then in grub_gzio_close(),
+ when tl was freed the storage for td would also be freed. The code then
+ attempts to free td explicitly, performing a UAF and then a double free.
+
+ Explicitly clean up tl and td in the error paths.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ io/gzio: Bail if gzio->tl/td is NULL
+ This is an ugly fix that doesn't address why gzio->tl comes to be NULL.
+ However, it seems to be sufficient to patch up a bunch of NULL derefs.
+
+ It would be good to revisit this in future and see if we can have
+ a cleaner solution that addresses some of the causes of the unexpected
+ NULL pointers.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ fs/nilfs2: Properly bail on errors in grub_nilfs2_btree_node_lookup()
+ We just introduced an error return in grub_nilfs2_btree_node_lookup().
+ Make sure the callers catch it.
+
+ At the same time, make sure that grub_nilfs2_btree_node_lookup() always
+ inits the index pointer passed to it.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ fs/nilfs2: Don't search children if provided number is too large
+ NILFS2 reads the number of children a node has from the node. Unfortunately,
+ that's not trustworthy. Check if it's beyond what the filesystem permits and
+ reject it if so.
+
+ This blocks some OOB reads. I'm not sure how controllable the read is and what
+ could be done with invalidly read data later on.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ fs/nilfs2: Reject too-large keys
+ NILFS2 has up to 7 keys, per the data structure. Do not permit array
+ indices in excess of that.
+
+ This catches some OOB reads. I don't know how controllable the invalidly
+ read data is or if that could be used later in the program.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ fs/jfs: Catch infinite recursion
+ It's possible with a fuzzed filesystem for JFS to keep getblk()-ing
+ the same data over and over again, leading to stack exhaustion.
+
+ Check if we'd be calling the function with exactly the same data as
+ was passed in, and if so abort.
+
+ I'm not sure what the performance impact of this is and am open to
+ better ideas.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ fs/jfs: Limit the extents that getblk() can consider
+ getblk() implicitly trusts that treehead->count is an accurate count of
+ the number of extents. However, that value is read from disk and is not
+ trustworthy, leading to OOB reads and crashes. I am not sure to what
+ extent the data read from OOB can influence subsequent program execution.
+
+ Require callers to pass in the maximum number of extents for which
+ they have storage.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ fs/jfs: Do not move to leaf level if name length is negative
+ Fuzzing JFS revealed crashes where a negative number would be passed
+ to le_to_cpu16_copy(). There it would be cast to a large positive number
+ and the copy would read and write off the end of the respective buffers.
+
+ Catch this at the top as well as the bottom of the loop.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ fs/sfs: Fix over-read of root object name
+ There's a read of the name of the root object that assumes that the name
+ is nul-terminated within the root block. This isn't guaranteed - it seems
+ SFS would require you to read multiple blocks to get a full name in general,
+ but maybe that doesn't apply to the root object.
+
+ Either way, figure out how much space is left in the root block and don't
+ over-read it. This fixes some OOB reads.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ fs/hfs: Disable under lockdown
+ HFS has issues such as infinite mutual recursion that are simply too
+ complex to fix for such a legacy format. So simply do not permit
+ it to be loaded under lockdown.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ fs/hfsplus: Don't use uninitialized data on corrupt filesystems
+ Valgrind identified the following use of uninitialized data:
+
+ ==2782220== Conditional jump or move depends on uninitialised value(s)
+ ==2782220== at 0x42B364: grub_hfsplus_btree_search (hfsplus.c:566)
+ ==2782220== by 0x42B21D: grub_hfsplus_read_block (hfsplus.c:185)
+ ==2782220== by 0x42A693: grub_fshelp_read_file (fshelp.c:386)
+ ==2782220== by 0x42C598: grub_hfsplus_read_file (hfsplus.c:219)
+ ==2782220== by 0x42C598: grub_hfsplus_mount (hfsplus.c:330)
+ ==2782220== by 0x42B8C5: grub_hfsplus_dir (hfsplus.c:958)
+ ==2782220== by 0x4C1AE6: grub_fs_probe (fs.c:73)
+ ==2782220== by 0x407C94: grub_ls_list_files (ls.c:186)
+ ==2782220== by 0x407C94: grub_cmd_ls (ls.c:284)
+ ==2782220== by 0x4D7130: grub_extcmd_dispatcher (extcmd.c:55)
+ ==2782220== by 0x4045A6: execute_command (grub-fstest.c:59)
+ ==2782220== by 0x4045A6: fstest (grub-fstest.c:433)
+ ==2782220== by 0x4045A6: main (grub-fstest.c:772)
+ ==2782220== Uninitialised value was created by a heap allocation
+ ==2782220== at 0x483C7F3: malloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
+ ==2782220== by 0x4C0305: grub_malloc (mm.c:42)
+ ==2782220== by 0x42C21D: grub_hfsplus_mount (hfsplus.c:239)
+ ==2782220== by 0x42B8C5: grub_hfsplus_dir (hfsplus.c:958)
+ ==2782220== by 0x4C1AE6: grub_fs_probe (fs.c:73)
+ ==2782220== by 0x407C94: grub_ls_list_files (ls.c:186)
+ ==2782220== by 0x407C94: grub_cmd_ls (ls.c:284)
+ ==2782220== by 0x4D7130: grub_extcmd_dispatcher (extcmd.c:55)
+ ==2782220== by 0x4045A6: execute_command (grub-fstest.c:59)
+ ==2782220== by 0x4045A6: fstest (grub-fstest.c:433)
+ ==2782220== by 0x4045A6: main (grub-fstest.c:772)
+
+ This happens when the process of reading the catalog file goes sufficiently
+ wrong that there's an attempt to read the extent overflow file, which has
+ not yet been loaded. Keep track of when the extent overflow file is
+ fully loaded and refuse to use it before then.
+
+ The load valgrind doesn't like is btree->nodesize, and that's then used
+ to allocate a data structure. It looks like there are subsequently a lot
+ of reads based on that pointer so OOB reads are likely, and indeed crashes
+ (albeit difficult-to-replicate ones) have been observed in fuzzing.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ fs/hfsplus: Don't fetch a key beyond the end of the node
+ Otherwise you get a wild pointer, leading to a bunch of invalid reads.
+ Check it falls inside the given node.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ fs/fshelp: Catch impermissibly large block sizes in read helper
+ A fuzzed HFS+ filesystem had log2blocksize = 22. This gave
+ log2blocksize + GRUB_DISK_SECTOR_BITS = 31. 1 << 31 = 0x80000000,
+ which is -1 as an int. This caused some wacky behavior later on in
+ the function, leading to out-of-bounds writes on the destination buffer.
+
+ Catch log2blocksize + GRUB_DISK_SECTOR_BITS >= 31. We could be stricter,
+ but this is the minimum that will prevent integer size weirdness.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ term/gfxterm: Don't set up a font with glyphs that are too big
+ Catch the case where we have a font so big that it causes the number of
+ rows or columns to be 0. Currently we continue and allocate a
+ virtual_screen.text_buffer of size 0. We then try to use that for glpyhs
+ and things go badly.
+
+ On the emu platform, malloc() may give us a valid pointer, in which case
+ we'll access heap memory which we shouldn't. Alternatively, it may give us
+ NULL, in which case we'll crash. For other platforms, if I understand
+ grub_memalign() correctly, we will receive a valid but small allocation
+ that we will very likely later overrun.
+
+ Prevent the creation of a virtual screen that isn't at least 40 cols
+ by 12 rows. This is arbitrary, but it seems that if your width or height
+ is half a standard 80x24 terminal, you're probably going to struggle to
+ read anything anyway.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ video/readers/jpeg: Don't decode data before start of stream
+ When a start of stream marker is encountered, we call grub_jpeg_decode_sos()
+ which allocates space for a bitmap.
+
+ When a restart marker is encountered, we call grub_jpeg_decode_data() which
+ then fills in that bitmap.
+
+ If we get a restart marker before the start of stream marker, we will
+ attempt to write to a bitmap_ptr that hasn't been allocated. Catch this
+ and bail out. This fixes an attempt to write to NULL.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ video/readers/jpeg: Catch OOB reads/writes in grub_jpeg_decode_du()
+ The key line is:
+
+ du[jpeg_zigzag_order[pos]] = val * (int) data->quan_table[qt][pos];
+
+ jpeg_zigzag_order is grub_uint8_t[64].
+
+ I don't understand JPEG decoders quite well enough to explain what's
+ going on here. However, I observe sometimes pos=64, which leads to an
+ OOB read of the jpeg_zigzag_order global then an OOB write to du.
+ That leads to various unpleasant memory corruption conditions.
+
+ Catch where pos >= ARRAY_SIZE(jpeg_zigzag_order) and bail.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ video/readers/jpeg: Catch files with unsupported quantization or Huffman tables
+ Our decoder only supports 2 quantization tables. If a file asks for
+ a quantization table with index > 1, reject it.
+
+ Similarly, our decoder only supports 4 Huffman tables. If a file asks
+ for a Huffman table with index > 3, reject it.
+
+ This fixes some out of bounds reads. It's not clear what degree of control
+ over subsequent execution could be gained by someone who can carefully
+ set up the contents of memory before loading an invalid JPEG file.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ kern/misc: Always set *end in grub_strtoull()
+ Currently, if there is an error in grub_strtoull(), *end is not set.
+ This differs from the usual behavior of strtoull(), and also means that
+ some callers may use an uninitialized value for *end.
+
+ Set *end unconditionally.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ commands/menuentry: Fix quoting in setparams_prefix()
+ Commit 9acdcbf32542 (use single quotes in menuentry setparams command)
+ says that expressing a quoted single quote will require 3 characters. It
+ actually requires (and always did require!) 4 characters:
+
+ str: a'b => a'\''b
+ len: 3 => 6 (2 for the letters + 4 for the quote)
+
+ This leads to not allocating enough memory and thus out of bounds writes
+ that have been observed to cause heap corruption.
+
+ Allocate 4 bytes for each single quote.
+
+ Commit 22e7dbb2bb81 (Fix quoting in legacy parser.) does the same
+ quoting, but it adds 3 as extra overhead on top of the single byte that
+ the quote already needs. So it's correct.
+
+ Fixes: 9acdcbf32542 (use single quotes in menuentry setparams command)
+ Fixes: CVE-2021-20233
+
+ Reported-by: Daniel Axtens <dja@axtens.net>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ script/execute: Don't crash on a "for" loop with no items
+ The following crashes the parser:
+
+ for x in; do
+ 0
+ done
+
+ This is because grub_script_arglist_to_argv() doesn't consider the
+ possibility that arglist is NULL. Catch that explicitly.
+
+ This avoids a NULL pointer dereference.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ lib/arg: Block repeated short options that require an argument
+ Fuzzing found the following crash:
+
+ search -hhhhhhhhhhhhhf
+
+ We didn't allocate enough option space for 13 hints because the
+ allocation code counts the number of discrete arguments (i.e. argc).
+ However, the shortopt parsing code will happily keep processing
+ a combination of short options without checking if those short
+ options require an argument. This means you can easily end writing
+ past the allocated option space.
+
+ This fixes a OOB write which can cause heap corruption.
+
+ Fixes: CVE-2021-20225
+
+ Reported-by: Daniel Axtens <dja@axtens.net>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ script/execute: Avoid crash when using "$#" outside a function scope
+ "$#" represents the number of arguments to a function. It is only
+ defined in a function scope, where "scope" is non-NULL. Currently,
+ if we attempt to evaluate "$#" outside a function scope, "scope" will
+ be NULL and we will crash with a NULL pointer dereference.
+
+ Do not attempt to count arguments for "$#" if "scope" is NULL. This
+ will result in "$#" being interpreted as an empty string if evaluated
+ outside a function scope.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ commands/ls: Require device_name is not NULL before printing
+ This can be triggered with:
+ ls -l (0 0*)
+ and causes a NULL deref in grub_normal_print_device_info().
+
+ I'm not sure if there's any implication with the IEEE 1275 platform.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Axtens <dja@axtens.net>
+
+ script/execute: Fix NULL dereference in grub_script_execute_cmdline()
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ util/glue-efi: Fix incorrect use of a possibly negative value
+ It is possible for the ftell() function to return a negative value,
+ although it is fairly unlikely here, we should be checking for
+ a negative value before we assign it to an unsigned value.
+
+ Fixes: CID 73744
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ util/grub-editenv: Fix incorrect casting of a signed value
+ The return value of ftell() may be negative (-1) on error. While it is
+ probably unlikely to occur, we should not blindly cast to an unsigned
+ value without first testing that it is not negative.
+
+ Fixes: CID 73856
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Daniel Kiper <daniel.kiper@oracle.com>
+
+ util/grub-install: Fix NULL pointer dereferences
+ Two grub_device_open() calls does not have associated NULL checks
+ for returned values. Fix that and appease the Coverity.
+
+ Fixes: CID 314583
+
+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
+
+2021-03-02 Paulo Flabiano Smorigo <pfsmorigo@canonical.com>
+
+ loader/xnu: Check if pointer is NULL before using it
+ Fixes: CID 73654
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Marco A Benatto <mbenatto@redhat.com>
+
+ loader/xnu: Free driverkey data when an error is detected in grub_xnu_writetree_toheap()
+ ... to avoid memory leaks.
+
+ Fixes: CID 96640
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ loader/xnu: Fix memory leak
+ The code here is finished with the memory stored in name, but it only
+ frees it if there curvalue is valid, while it could actually free it
+ regardless.
+
+ The fix is a simple relocation of the grub_free() to before the test
+ of curvalue.
+
+ Fixes: CID 96646
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ loader/bsd: Check for NULL arg up-front
+ The code in the next block suggests that it is possible for .set to be
+ true but .arg may still be NULL.
+
+ This code assumes that it is never NULL, yet later is testing if it is
+ NULL - that is inconsistent.
+
+ So we should check first if .arg is not NULL, and remove this check that
+ is being flagged by Coverity since it is no longer required.
+
+ Fixes: CID 292471
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ gfxmenu/gui_list: Remove code that coverity is flagging as dead
+ The test of value for NULL before calling grub_strdup() is not required,
+ since the if condition prior to this has already tested for value being
+ NULL and cannot reach this code if it is.
+
+ Fixes: CID 73659
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ video/readers/jpeg: Test for an invalid next marker reference from a jpeg file
+ While it may never happen, and potentially could be caught at the end of
+ the function, it is worth checking up front for a bad reference to the
+ next marker just in case of a maliciously crafted file being provided.
+
+ Fixes: CID 73694
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ video/fb/video_fb: Fix possible integer overflow
+ It is minimal possibility that the values being used here will overflow.
+ So, change the code to use the safemath function grub_mul() to ensure
+ that doesn't happen.
+
+ Fixes: CID 73761
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ video/fb/video_fb: Fix multiple integer overflows
+ The calculation of the unsigned 64-bit value is being generated by
+ multiplying 2, signed or unsigned, 32-bit integers which may overflow
+ before promotion to unsigned 64-bit. Fix all of them.
+
+ Fixes: CID 73703, CID 73767, CID 73833
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ video/fb/fbfill: Fix potential integer overflow
+ The multiplication of 2 unsigned 32-bit integers may overflow before
+ promotion to unsigned 64-bit. We should ensure that the multiplication
+ is done with overflow detection. Additionally, use grub_sub() for
+ subtraction.
+
+ Fixes: CID 73640, CID 73697, CID 73702, CID 73823
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ video/efi_gop: Remove unnecessary return value of grub_video_gop_fill_mode_info()
+ The return value of grub_video_gop_fill_mode_info() is never able to be
+ anything other than GRUB_ERR_NONE. So, rather than continue to return
+ a value and checking it each time, it is more correct to redefine the
+ function to not return anything and remove checks of its return value
+ altogether.
+
+ Fixes: CID 96701
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ commands/probe: Fix a resource leak when probing disks
+ Every other return statement in this code is calling grub_device_close()
+ to clean up dev before returning. This one should do that too.
+
+ Fixes: CID 292443
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Chris Coulson <chris.coulson@canonical.com>
+
+ commands/hashsum: Fix a memory leak
+ check_list() uses grub_file_getline(), which allocates a buffer.
+ If the hash list file contains invalid lines, the function leaks
+ this buffer when it returns an error.
+
+ Fixes: CID 176635
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ normal/completion: Fix leaking of memory when processing a completion
+ It is possible for the code to reach the end of the function without
+ freeing the memory allocated to argv and argc still to be 0.
+
+ We should always call grub_free(argv). The grub_free() will handle
+ a NULL argument correctly if it reaches that code without the memory
+ being allocated.
+
+ Fixes: CID 96672
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ syslinux: Fix memory leak while parsing
+ In syslinux_parse_real() the 2 points where return is being called
+ didn't release the memory stored in buf which is no longer required.
+
+ Fixes: CID 176634
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ libgcrypt/mpi: Fix possible NULL dereference
+ The code in gcry_mpi_scan() assumes that buffer is not NULL, but there
+ is no explicit check for that, so we add one.
+
+ Fixes: CID 73757
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ libgcrypt/mpi: Fix possible unintended sign extension
+ The array of unsigned char gets promoted to a signed 32-bit int before
+ it is finally promoted to a size_t. There is the possibility that this
+ may result in the signed-bit being set for the intermediate signed
+ 32-bit int. We should ensure that the promotion is to the correct type
+ before we bitwise-OR the values.
+
+ Fixes: CID 96697
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ affs: Fix memory leaks
+ The node structure reference is being allocated but not freed if it
+ reaches the end of the function. If any of the hooks had returned
+ a non-zero value, then node would have been copied in to the context
+ reference, but otherwise node is not stored and should be freed.
+
+ Similarly, the call to grub_affs_create_node() replaces the allocated
+ memory in node with a newly allocated structure, leaking the existing
+ memory pointed by node.
+
+ Finally, when dir->parent is set, then we again replace node with newly
+ allocated memory, which seems unnecessary when we copy in the values
+ from dir->parent immediately after.
+
+ Fixes: CID 73759
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ zfsinfo: Correct a check for error allocating memory
+ While arguably the check for grub_errno is correct, we should really be
+ checking the return value from the function since it is always possible
+ that grub_errno was set elsewhere, making this code behave incorrectly.
+
+ Fixes: CID 73668
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ zfs: Fix possible integer overflows
+ In all cases the problem is that the value being acted upon by
+ a left-shift is a 32-bit number which is then being used in the
+ context of a 64-bit number.
+
+ To avoid overflow we ensure that the number being shifted is 64-bit
+ before the shift is done.
+
+ Fixes: CID 73684, CID 73695, CID 73764
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Paulo Flabiano Smorigo <pfsmorigo@canonical.com>
+
+ zfs: Fix resource leaks while constructing path
+ There are several exit points in dnode_get_path() that are causing possible
+ memory leaks.
+
+ In the while(1) the correct exit mechanism should not be to do a direct return,
+ but to instead break out of the loop, setting err first if it is not already set.
+
+ The reason behind this is that the dnode_path is a linked list, and while doing
+ through this loop, it is being allocated and built up - the only way to
+ correctly unravel it is to traverse it, which is what is being done at the end
+ of the function outside of the loop.
+
+ Several of the existing exit points correctly did a break, but not all so this
+ change makes that more consistent and should resolve the leaking of memory as
+ found by Coverity.
+
+ Fixes: CID 73741
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ zfs: Fix possible negative shift operation
+ While it is possible for the return value from zfs_log2() to be zero
+ (0), it is quite unlikely, given that the previous assignment to blksz
+ is shifted up by SPA_MINBLOCKSHIFT (9) before 9 is subtracted at the
+ assignment to epbs.
+
+ But, while unlikely during a normal operation, it may be that a carefully
+ crafted ZFS filesystem could result in a zero (0) value to the
+ dn_datalbkszsec field, which means that the shift left does nothing
+ and assigns zero (0) to blksz, resulting in a negative epbs value.
+
+ Fixes: CID 73608
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ hfsplus: Check that the volume name length is valid
+ HFS+ documentation suggests that the maximum filename and volume name is
+ 255 Unicode characters in length.
+
+ So, when converting from big-endian to little-endian, we should ensure
+ that the name of the volume has a length that is between 0 and 255,
+ inclusive.
+
+ Fixes: CID 73641
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ disk/cryptodisk: Fix potential integer overflow
+ The encrypt and decrypt functions expect a grub_size_t. So, we need to
+ ensure that the constant bit shift is using grub_size_t rather than
+ unsigned int when it is performing the shift.
+
+ Fixes: CID 307788
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ disk/ldm: Fix memory leak on uninserted lv references
+ The problem here is that the memory allocated to the variable lv is not
+ yet inserted into the list that is being processed at the label fail2.
+
+ As we can already see at line 342, which correctly frees lv before going
+ to fail2, we should also be doing that at these earlier jumps to fail2.
+
+ Fixes: CID 73824
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Paulo Flabiano Smorigo <pfsmorigo@canonical.com>
+
+ disk/ldm: If failed then free vg variable too
+ Fixes: CID 73809
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Marco A Benatto <mbenatto@redhat.com>
+
+ disk/ldm: Make sure comp data is freed before exiting from make_vg()
+ Several error handling paths in make_vg() do not free comp data before
+ jumping to fail2 label and returning from the function. This will leak
+ memory. So, let's fix all issues of that kind.
+
+ Fixes: CID 73804
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ kern/partition: Check for NULL before dereferencing input string
+ There is the possibility that the value of str comes from an external
+ source and continuing to use it before ever checking its validity is
+ wrong. So, needs fixing.
+
+ Additionally, drop unneeded part initialization.
+
+ Fixes: CID 292444
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ zstd: Initialize seq_t structure fully
+ While many compilers will initialize this to zero, not all will, so it
+ is better to be sure that fields not being explicitly set are at known
+ values, and there is code that checks this fields value elsewhere in the
+ code.
+
+ Fixes: CID 292440
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ io/lzopio: Resolve unnecessary self-assignment errors
+ These 2 assignments are unnecessary since they are just assigning
+ to themselves.
+
+ Fixes: CID 73643
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ gnulib/regcomp: Fix uninitialized re_token
+ This issue has been fixed in the latest version of gnulib, so to
+ maintain consistency, I've backported that change rather than doing
+ something different.
+
+ Fixes: CID 73828
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ gnulib/regexec: Fix possible null-dereference
+ It appears to be possible that the mctx->state_log field may be NULL,
+ and the name of this function, clean_state_log_if_needed(), suggests
+ that it should be checking that it is valid to be cleaned before
+ assuming that it does.
+
+ Fixes: CID 86720
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ gnulib/argp-help: Fix dereference of a possibly NULL state
+ All other instances of call to __argp_failure() where there is
+ a dgettext() call is first checking whether state is NULL before
+ attempting to dereference it to get the root_argp->argp_domain.
+
+ Fixes: CID 292436
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ gnulib/regcomp: Fix uninitialized token structure
+ The code is assuming that the value of br_token.constraint was
+ initialized to zero when it wasn't.
+
+ While some compilers will ensure that, not all do, so it is better to
+ fix this explicitly than leave it to chance.
+
+ Fixes: CID 73749
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ gnulib/regexec: Resolve unused variable
+ This is a really minor issue where a variable is being assigned to but
+ not checked before it is overwritten again.
+
+ The reason for this issue is that we are not building with DEBUG set and
+ this in turn means that the assert() that reads the value of the
+ variable match_last is being processed out.
+
+ The solution, move the assignment to match_last in to an ifdef DEBUG too.
+
+ Fixes: CID 292459
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ kern/efi/mm: Fix possible NULL pointer dereference
+ The model of grub_efi_get_memory_map() is that if memory_map is NULL,
+ then the purpose is to discover how much memory should be allocated to
+ it for the subsequent call.
+
+ The problem here is that with grub_efi_is_finished set to 1, there is no
+ check at all that the function is being called with a non-NULL memory_map.
+
+ While this MAY be true, we shouldn't assume it.
+
+ The solution to this is to behave as expected, and if memory_map is NULL,
+ then don't try to use it and allow memory_map_size to be filled in, and
+ return 0 as is done later in the code if the buffer is too small (or NULL).
+
+ Additionally, drop unneeded ret = 1.
+
+ Fixes: CID 96632
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ kern/efi: Fix memory leak on failure
+ Free the memory allocated to name before returning on failure.
+
+ Fixes: CID 296222
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ kern/parser: Fix resource leak if argc == 0
+ After processing the command-line yet arriving at the point where we are
+ setting argv, we are allocating memory, even if argc == 0, which makes
+ no sense since we never put anything into the allocated argv.
+
+ The solution is to simply return that we've successfully processed the
+ arguments but that argc == 0, and also ensure that argv is NULL when
+ we're not allocating anything in it.
+
+ There are only 2 callers of this function, and both are handling a zero
+ value in argc assuming nothing is allocated in argv.
+
+ Fixes: CID 96680
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ net/tftp: Fix dangling memory pointer
+ The static code analysis tool, Parfait, reported that the valid of
+ file->data was left referencing memory that was freed by the call to
+ grub_free(data) where data was initialized from file->data.
+
+ To ensure that there is no unintentional access to this memory
+ referenced by file->data we should set the pointer to NULL.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ net/net: Fix possible dereference to of a NULL pointer
+ It is always possible that grub_zalloc() could fail, so we should check for
+ a NULL return. Otherwise we run the risk of dereferencing a NULL pointer.
+
+ Fixes: CID 296221
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Darren Kenny <darren.kenny@oracle.com>
+
+ mmap: Fix memory leak when iterating over mapped memory
+ When returning from grub_mmap_iterate() the memory allocated to present
+ is not being released causing it to leak.
+
+ Fixes: CID 96655
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Javier Martinez Canillas <javierm@redhat.com>
+
+ usb: Avoid possible out-of-bound accesses caused by malicious devices
+ The maximum number of configurations and interfaces are fixed but there is
+ no out-of-bound checking to prevent a malicious USB device to report large
+ values for these and cause accesses outside the arrays' memory.
+
+ Fixes: CVE-2020-25647
+
+ Reported-by: Joseph Tartaro <joseph.tartaro@ioactive.com>
+ Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Javier Martinez Canillas <javierm@redhat.com>
+
+ dl: Only allow unloading modules that are not dependencies
+ When a module is attempted to be removed its reference counter is always
+ decremented. This means that repeated rmmod invocations will cause the
+ module to be unloaded even if another module depends on it.
+
+ This may lead to a use-after-free scenario allowing an attacker to execute
+ arbitrary code and by-pass the UEFI Secure Boot protection.
+
+ While being there, add the extern keyword to some function declarations in
+ that header file.
+
+ Fixes: CVE-2020-25632
+
+ Reported-by: Chris Coulson <chris.coulson@canonical.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Javier Martinez Canillas <javierm@redhat.com>
+
+ docs: Document the cutmem command
+ The command is not present in the docs/grub.texi user documentation.
+
+ Reported-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
+
+2021-03-02 Javier Martinez Canillas <javierm@redhat.com>
+
+ loader/xnu: Don't allow loading extension and packages when locked down
+ The shim_lock verifier validates the XNU kernels but no its extensions
+ and packages. Prevent these to be loaded when the GRUB is locked down.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Javier Martinez Canillas <javierm@redhat.com>
+
+ gdb: Restrict GDB access when locked down
+ The gdbstub* commands allow to start and control a GDB stub running on
+ local host that can be used to connect from a remote debugger. Restrict
+ this functionality when the GRUB is locked down.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Javier Martinez Canillas <javierm@redhat.com>
+
+ commands/hdparm: Restrict hdparm command when locked down
+ The command can be used to get/set ATA disk parameters. Some of these can
+ be dangerous since change the disk behavior. Restrict it when locked down.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Javier Martinez Canillas <javierm@redhat.com>
+
+ commands/setpci: Restrict setpci command when locked down
+ This command can set PCI devices register values, which makes it dangerous
+ in a locked down configuration. Restrict it so can't be used on this setup.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Javier Martinez Canillas <javierm@redhat.com>
+
+ commands: Restrict commands that can load BIOS or DT blobs when locked down
+ There are some more commands that should be restricted when the GRUB is
+ locked down. Following is the list of commands and reasons to restrict:
+
+ * fakebios: creates BIOS-like structures for backward compatibility with
+ existing OSes. This should not be allowed when locked down.
+
+ * loadbios: reads a BIOS dump from storage and loads it. This action
+ should not be allowed when locked down.
+
+ * devicetree: loads a Device Tree blob and passes it to the OS. It replaces
+ any Device Tree provided by the firmware. This also should
+ not be allowed when locked down.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Javier Martinez Canillas <javierm@redhat.com>
+
+ mmap: Don't register cutmem and badram commands when lockdown is enforced
+ The cutmem and badram commands can be used to remove EFI memory regions
+ and potentially disable the UEFI Secure Boot. Prevent the commands to be
+ registered if the GRUB is locked down.
+
+ Fixes: CVE-2020-27779
+
+ Reported-by: Teddy Reed <teddy.reed@gmail.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Javier Martinez Canillas <javierm@redhat.com>
+
+ acpi: Don't register the acpi command when locked down
+ The command is not allowed when lockdown is enforced. Otherwise an
+ attacker can instruct the GRUB to load an SSDT table to overwrite
+ the kernel lockdown configuration and later load and execute
+ unsigned code.
+
+ Fixes: CVE-2020-14372
+
+ Reported-by: Máté Kukri <km@mkukri.xyz>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Javier Martinez Canillas <javierm@redhat.com>
+
+ efi: Use grub_is_lockdown() instead of hardcoding a disabled modules list
+ Now the GRUB can check if it has been locked down and this can be used to
+ prevent executing commands that can be utilized to circumvent the UEFI
+ Secure Boot mechanisms. So, instead of hardcoding a list of modules that
+ have to be disabled, prevent the usage of commands that can be dangerous.
+
+ This not only allows the commands to be disabled on other platforms, but
+ also properly separate the concerns. Since the shim_lock verifier logic
+ should be only about preventing to run untrusted binaries and not about
+ defining these kind of policies.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Javier Martinez Canillas <javierm@redhat.com>
+
+ efi: Lockdown the GRUB when the UEFI Secure Boot is enabled
+ If the UEFI Secure Boot is enabled then the GRUB must be locked down
+ to prevent executing code that can potentially be used to subvert its
+ verification mechanisms.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Javier Martinez Canillas <javierm@redhat.com>
+
+ kern/lockdown: Set a variable if the GRUB is locked down
+ It may be useful for scripts to determine whether the GRUB is locked
+ down or not. Add the lockdown variable which is set to "y" when the GRUB
+ is locked down.
+
+ Suggested-by: Dimitri John Ledkov <xnox@ubuntu.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Javier Martinez Canillas <javierm@redhat.com>
+
+ kern: Add lockdown support
+ When the GRUB starts on a secure boot platform, some commands can be
+ used to subvert the protections provided by the verification mechanism and
+ could lead to booting untrusted system.
+
+ To prevent that situation, allow GRUB to be locked down. That way the code
+ may check if GRUB has been locked down and further restrict the commands
+ that are registered or what subset of their functionality could be used.
+
+ The lockdown support adds the following components:
+
+ * The grub_lockdown() function which can be used to lockdown GRUB if,
+ e.g., UEFI Secure Boot is enabled.
+
+ * The grub_is_lockdown() function which can be used to check if the GRUB
+ was locked down.
+
+ * A verifier that flags OS kernels, the GRUB modules, Device Trees and ACPI
+ tables as GRUB_VERIFY_FLAGS_DEFER_AUTH to defer verification to other
+ verifiers. These files are only successfully verified if another registered
+ verifier returns success. Otherwise, the whole verification process fails.
+
+ For example, PE/COFF binaries verification can be done by the shim_lock
+ verifier which validates the signatures using the shim_lock protocol.
+ However, the verification is not deferred directly to the shim_lock verifier.
+ The shim_lock verifier is hooked into the verification process instead.
+
+ * A set of grub_{command,extcmd}_lockdown functions that can be used by
+ code registering command handlers, to only register unsafe commands if
+ the GRUB has not been locked down.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Marco A Benatto <mbenatto@redhat.com>
+
+ efi: Move the shim_lock verifier to the GRUB core
+ Move the shim_lock verifier from its own module into the core image. The
+ Secure Boot lockdown mechanism has the intent to prevent the load of any
+ unsigned code or binary when Secure Boot is enabled.
+
+ The reason is that GRUB must be able to prevent executing untrusted code
+ if UEFI Secure Boot is enabled, without depending on external modules.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2021-03-02 Marco A Benatto <mbenatto@redhat.com>
+
+ verifiers: Move verifiers API to kernel image
+ Move verifiers API from a module to the kernel image, so it can be
+ used there as well. There are no functional changes in this patch.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-18 Glenn Washburn <development@efficientek.com>
+
+ docs: Add documentation of disk size limitations
+ Document the artificially imposed 1 EiB disk size limit and size limitations
+ with LUKS volumes.
+
+ Fix a few punctuation issues.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-18 Glenn Washburn <development@efficientek.com>
+
+ luks2: Use grub_log2ull() to calculate log_sector_size and improve readability
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+ misc: Add grub_log2ull() macro for calculating log base 2 of 64-bit integers
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-18 Glenn Washburn <development@efficientek.com>
+
+ mips: Enable __clzdi2()
+ This patch is similar to commit 9dab2f51e (sparc: Enable __clzsi2() and
+ __clzdi2()) but for MIPS target and __clzdi2() only, __clzsi2() was
+ already enabled.
+
+ Suggested-by: Daniel Kiper <dkiper@net-space.pl>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-18 Glenn Washburn <development@efficientek.com>
+
+ luks2: Better error handling when setting up the cryptodisk
+ Do some sanity checking on data coming from the LUKS2 header. If segment.size
+ is "dynamic", verify that the offset is not past the end of disk. Otherwise,
+ check for errors from grub_strtoull() when converting segment size from
+ string. If a GRUB_ERR_BAD_NUMBER error was returned, then the string was
+ not a valid parsable number, so skip the key. If GRUB_ERR_OUT_OF_RANGE was
+ returned, then there was an overflow in converting to a 64-bit unsigned
+ integer. So this could be a very large disk (perhaps large RAID array).
+ In this case skip the key too. Additionally, enforce some other limits
+ and fail if needed.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-18 Glenn Washburn <development@efficientek.com>
+
+ luks2: Do not handle disks of size GRUB_DISK_SIZE_UNKNOWN for now
+ Check to make sure that source disk has a known size. If not, print
+ a message and return error. There are 4 cases where GRUB_DISK_SIZE_UNKNOWN
+ is set (biosdisk, obdisk, ofdisk, and uboot), and in all those cases
+ processing continues. So this is probably a bit conservative. However,
+ 3 of the cases seem pathological, and the other, biosdisk, happens when
+ booting from a CD-ROM. Since I doubt booting from a LUKS2 volume on
+ a CD-ROM is a big use case, we'll error until someone complains.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-18 Glenn Washburn <development@efficientek.com>
+
+ luks2: Convert to crypt sectors from GRUB native sectors
+ The function grub_disk_native_sectors(source) returns the number of sectors
+ of source in GRUB native (512-byte) sectors, not source sized sectors. So
+ the conversion needs to use GRUB_DISK_SECTOR_BITS, the GRUB native sector
+ size.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-12 Glenn Washburn <development@efficientek.com>
+
+ luks2: Error check segment.sector_size
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-12 Glenn Washburn <development@efficientek.com>
+
+ cryptodisk: Properly handle non-512 byte sized sectors
+ By default, dm-crypt internally uses an IV that corresponds to 512-byte
+ sectors, even when a larger sector size is specified. What this means is
+ that when using a larger sector size, the IV is incremented every sector.
+ However, the amount the IV is incremented is the number of 512 byte blocks
+ in a sector (i.e. 8 for 4K sectors). Confusingly the IV does not correspond
+ to the number of, for example, 4K sectors. So each 512 byte cipher block in
+ a sector will be encrypted with the same IV and the IV will be incremented
+ afterwards by the number of 512 byte cipher blocks in the sector.
+
+ There are some encryption utilities which do it the intuitive way and have
+ the IV equal to the sector number regardless of sector size (ie. the fifth
+ sector would have an IV of 4 for each cipher block). And this is supported
+ by dm-crypt with the iv_large_sectors option and also cryptsetup as of 2.3.3
+ with the --iv-large-sectors, though not with LUKS headers (only with --type
+ plain). However, support for this has not been included as grub does not
+ support plain devices right now.
+
+ One gotcha here is that the encrypted split keys are encrypted with a hard-
+ coded 512-byte sector size. So even if your data is encrypted with 4K sector
+ sizes, the split key encrypted area must be decrypted with a block size of
+ 512 (ie the IV increments every 512 bytes). This made these changes less
+ aesthetically pleasing than desired.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-12 Glenn Washburn <development@efficientek.com>
+
+ luks2: grub_cryptodisk_t->total_sectors is the max number of device native sectors
+ We need to convert the sectors from the size of the underlying device to the
+ cryptodisk sector size; segment.size is in bytes which need to be converted
+ to cryptodisk sectors as well.
+
+ Also, removed an empty statement.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-12 Glenn Washburn <development@efficientek.com>
+
+ cryptodisk: Add macros GRUB_TYPE_U_MAX/MIN(type) to replace literals
+ Add GRUB_TYPE_U_MAX/MIN(type) macros to get the max/min values for an
+ unsigned number with size of type.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-12 Glenn Washburn <development@efficientek.com>
+
+ cryptodisk: Add macro GRUB_TYPE_BITS() to replace some literals
+ The new macro GRUB_TYPE_BITS(type) returns the number of bits
+ allocated for type.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-12 Glenn Washburn <development@efficientek.com>
+
+ luks2: Add string "index" to user strings using a json index
+ This allows error messages to be more easily distinguishable between indexes
+ and slot keys. The former include the string "index" in the error/debug
+ string, and the later are surrounded in quotes.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-12 Glenn Washburn <development@efficientek.com>
+
+ luks2: Rename json index variables to names that they are obviously json indexes
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-12 Glenn Washburn <development@efficientek.com>
+
+ luks2: Use more intuitive object name instead of json index in user messages
+ Use the object name in the json array rather than the 0 based index in the
+ json array for keyslots, segments, and digests. This is less confusing for
+ the end user. For example, say you have a LUKS2 device with a key in slot 1
+ and slot 4. When using the password for slot 4 to unlock the device, the
+ messages using the index of the keyslot will mention keyslot 1 (its a
+ zero-based index). Furthermore, with this change the keyslot number will
+ align with the number used to reference the keyslot when using the
+ --key-slot argument to cryptsetup.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-12 Glenn Washburn <development@efficientek.com>
+
+ luks2: Add idx member to struct grub_luks2_keyslot/segment/digest
+ This allows code using these structs to know the named key associated with
+ these json data structures. In the future we can use these to provide better
+ error messages to the user.
+
+ Get rid of idx local variable in luks2_get_keyslot() which was overloaded to
+ be used for both keyslot and segment slot keys.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-12 Glenn Washburn <development@efficientek.com>
+
+ luks2: Make sure all fields of output argument in luks2_parse_digest() are written to
+ We should assume that the output argument "out" is uninitialized and could
+ have random data. So, make sure to initialize the segments and keyslots bit
+ fields because potentially not all bits of those fields are written to.
+ Otherwise, the digest could say it belongs to keyslots and segments that it
+ does not.
+
+ Reviewed-by: Patrick Steinhardt <ps@pks.im>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-12 Glenn Washburn <development@efficientek.com>
+
+ luks2: Remove unused argument in grub_error() call
+ Reviewed-by: Patrick Steinhardt <ps@pks.im>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+ luks2: Convert 8 spaces to tabs
+ Reviewed-by: Patrick Steinhardt <ps@pks.im>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-12 Glenn Washburn <development@efficientek.com>
+
+ misc: Add parentheses around ALIGN_UP() and ALIGN_DOWN() arguments
+ This ensures that expected order of operations is preserved when arguments
+ are expressions.
+
+ Reviewed-by: Patrick Steinhardt <ps@pks.im>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-12 Glenn Washburn <development@efficientek.com>
+
+ disk: Rename grub_disk_get_size() to grub_disk_native_sectors()
+ The function grub_disk_get_size() is confusingly named because it actually
+ returns a sector count where the sectors are sized in the GRUB native sector
+ size. Rename to something more appropriate.
+
+ Suggested-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Reviewed-by: Patrick Steinhardt <ps@pks.im>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-12 Glenn Washburn <development@efficientek.com>
+
+ loopback: Do not automaticaly replace existing loopback dev, error instead
+ If there is a loopback device with the same name as the one to be created,
+ instead of closing the old one and replacing it with the new one, return an
+ error instead. If the loopback device was created, its probably being used
+ by something and just replacing it may cause GRUB to crash unexpectedly.
+ This fixes obvious problems like "loopback d (d)/somefile". Its not too
+ onerous to force the user to delete the loopback first with the "-d" switch.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-12 Glenn Washburn <development@efficientek.com>
+
+ disk: Move hardcoded max disk size literal to a GRUB_DISK_MAX_SECTORS in disk.h
+ There is a hardcoded maximum disk size that can be read or written from,
+ currently set at 1 EiB in grub_disk_adjust_range(). Move the literal into a
+ macro in disk.h, so our assumptions are more visible. This hard coded limit
+ does not prevent using larger disks, just GRUB won't read/write past the
+ limit. The comment accompanying this restriction didn't quite make sense to
+ me, so its been modified too.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-12 Glenn Washburn <development@efficientek.com>
+
+ fs: Fix block lists not being able to address to end of disk sometimes
+ When checking if a block list goes past the end of the disk, make sure
+ the total size of the disk is in GRUB native sector sizes, otherwise there
+ will be blocks at the end of the disk inaccessible by block lists.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-12 Vladimir Serbinenko <phcoder@gmail.com>
+
+ mbr: Document new limitations on MBR gap support
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-12 Vladimir Serbinenko <phcoder@google.com>
+
+ mbr: Warn if MBR gap is small and user uses advanced modules
+ We don't want to support small MBR gap in pair with anything but the
+ simplest config of biosdisk + part_msdos + simple filesystem. In this
+ path "simple filesystems" are all current filesystems except ZFS and
+ Btrfs.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-12 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+
+ efi/tpm: Extract duplicate code into independent functions
+ Part of the code logic for processing the return value of efi
+ log_extend_event is repetitive and complicated. Extract the
+ repetitive code into an independent function.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-12 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+
+ efi/tpm: Add debug information for device protocol and eventlog
+ Add a number of debug logs to the tpm module. The condition tag
+ for opening debugging is "tpm". On TPM machines, this will bring
+ great convenience to diagnosis and debugging.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-12 Daniel Kiper <daniel.kiper@oracle.com>
+
+ loader/linux: Report the UEFI Secure Boot status to the Linux kernel
+ Now that the GRUB has a grub_efi_get_secureboot() function to check the
+ UEFI Secure Boot status, use it to report that to the Linux kernel.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-12 Javier Martinez Canillas <javierm@redhat.com>
+
+ efi: Only register shim_lock verifier if shim_lock protocol is found and SB enabled
+ The shim_lock module registers a verifier to call shim's verify, but the
+ handler is registered even when the shim_lock protocol was not installed.
+
+ This doesn't cause a NULL pointer dereference in shim_lock_write() because
+ the shim_lock_init() function just returns GRUB_ERR_NONE if sl isn't set.
+
+ But in that case there's no point to even register the shim_lock verifier
+ since won't do anything. Additionally, it is only useful when Secure Boot
+ is enabled.
+
+ Finally, don't assume that the shim_lock protocol will always be present
+ when the shim_lock_write() function is called, and check for it on every
+ call to this function.
+
+ Reported-by: Michael Chang <mchang@suse.com>
+ Reported-by: Peter Jones <pjones@redhat.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-11 Daniel Kiper <daniel.kiper@oracle.com>
+
+ efi: Add secure boot detection
+ Introduce grub_efi_get_secureboot() function which returns whether
+ UEFI Secure Boot is enabled or not on UEFI systems.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-11 Daniel Kiper <daniel.kiper@oracle.com>
+
+ efi: Add a function to read EFI variables with attributes
+ It will be used to properly detect and report UEFI Secure Boot status to
+ the x86 Linux kernel. The functionality will be added by subsequent patches.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-11 Daniel Kiper <daniel.kiper@oracle.com>
+
+ efi: Return grub_efi_status_t from grub_efi_get_variable()
+ This is needed to properly detect and report UEFI Secure Boot status
+ to the x86 Linux kernel. The functionality will be added by subsequent
+ patches.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-11 Daniel Kiper <daniel.kiper@oracle.com>
+
+ efi: Make shim_lock GUID and protocol type public
+ The GUID will be used to properly detect and report UEFI Secure Boot
+ status to the x86 Linux kernel. The functionality will be added by
+ subsequent patches. The shim_lock protocol type is made public for
+ completeness.
+
+ Additionally, fix formatting of four preceding GUIDs.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-11 Javier Martinez Canillas <javierm@redhat.com>
+
+ arm/term: Fix linking error due multiple ps2_state definitions
+ When building with --target=arm-linux-gnu --with-platform=coreboot
+ a linking error occurs caused by multiple definitions of the
+ ps2_state variable.
+
+ Mark them as static since they aren't used outside their compilation unit.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-11 Javier Martinez Canillas <javierm@redhat.com>
+
+ include/grub/i386/linux.h: Include missing <grub/types.h> header
+ This header uses types defined in <grub/types.h> but does not include it,
+ which leads to compile errors like the following:
+
+ In file included from ../include/grub/cpu/linux.h:19,
+ from kern/efi/sb.c:21:
+ ../include/grub/i386/linux.h:80:3: error: unknown type name ‘grub_uint64_t’
+ 80 | grub_uint64_t addr;
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-12-11 Javier Martinez Canillas <javierm@redhat.com>
+
+ i386: Don't include <grub/cpu/linux.h> in coreboot and ieee1275 startup.S
+ Nothing defined in the header file is used in the assembly code but it
+ may lead to build errors if some headers are included through this and
+ contains definitions that are not recognized by the assembler, e.g.:
+
+ ../include/grub/types.h: Assembler messages:
+ ../include/grub/types.h:76: Error: no such instruction: `typedef signed char grub_int8_t'
+ ../include/grub/types.h:77: Error: no such instruction: `typedef short grub_int16_t'
+ ../include/grub/types.h:78: Error: no such instruction: `typedef int grub_int32_t'
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-11-20 Glenn Washburn <development@efficientek.com>
+
+ luks2: Rename index variable "j" to "i" in luks2_get_keyslot()
+ Looping variable "j" was named such because the variable name "i" was taken.
+ Since "i" has been renamed in the previous patch, we can rename "j" to "i".
+
+ Reviewed-by: Patrick Steinhardt <ps@pks.im>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-11-20 Glenn Washburn <development@efficientek.com>
+
+ luks2: Rename variable "i" to "keyslot_idx" in luks2_get_keyslot()
+ Variables named "i" are usually looping variables. So, rename it to
+ "keyslot_idx" to ease luks2_get_keyslot() reading.
+
+ Reviewed-by: Patrick Steinhardt <ps@pks.im>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-11-20 Glenn Washburn <development@efficientek.com>
+
+ luks2: Use correct index variable when looping in luks2_get_keyslot()
+ The loop variable "j" should be used to index the digests and segments json
+ array, instead of the variable "i", which is the keyslot index.
+
+ Reviewed-by: Patrick Steinhardt <ps@pks.im>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-11-20 Glenn Washburn <development@efficientek.com>
+
+ luks2: Rename source disk variable named "disk" to "source" as in luks.c
+ This makes it more obvious to the reader that the disk referred to is the
+ source disk, as opposed to say the disk holding the cryptodisk.
+
+ Reviewed-by: Patrick Steinhardt <ps@pks.im>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-11-20 Glenn Washburn <development@efficientek.com>
+
+ cryptodisk: Rename "offset" in grub_cryptodisk_t to "offset_sectors"
+ This makes it clear that the offset represents sectors, not bytes, in
+ order to improve readability.
+
+ Reviewed-by: Patrick Steinhardt <ps@pks.im>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-11-20 Glenn Washburn <development@efficientek.com>
+
+ cryptodisk: Rename "total_length" field in grub_cryptodisk_t to "total_sectors"
+ This creates an alignment with grub_disk_t naming of the same field and is
+ more intuitive as to how it should be used.
+
+ Reviewed-by: Patrick Steinhardt <ps@pks.im>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-11-20 Glenn Washburn <development@efficientek.com>
+
+ types: Define GRUB_CHAR_BIT based on compiler macro instead of using literal
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-11-20 Javier Martinez Canillas <javierm@redhat.com>
+
+ include/grub/arm64/linux.h: Include missing <grub/types.h> header
+ This header uses types defined in <grub/types.h> but does not include it,
+ which leads to compile errors like the following:
+
+ ../include/grub/cpu/linux.h:27:3: error: unknown type name ‘grub_uint32_t’
+ 27 | grub_uint32_t code0; /* Executable code */
+ | ^~~~~~~~~~~~~
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-11-20 Javier Martinez Canillas <javierm@redhat.com>
+
+ include/grub/arm/system.h: Include missing <grub/symbol.h> header
+ The header uses the EXPORT_FUNC() macro defined in <grub/types.h> but
+ doesn't include it, which leads to the following compile error on arm:
+
+ ../include/grub/cpu/system.h:12:13: error: ‘EXPORT_FUNC’ declared as function returning a function
+ 12 | extern void EXPORT_FUNC(grub_arm_disable_caches_mmu) (void);
+ | ^~~~~~~~~~~
+ ../include/grub/cpu/system.h:12:1: warning: parameter names (without types) in function declaration
+ 12 | extern void EXPORT_FUNC(grub_arm_disable_caches_mmu) (void);
+ | ^~~~~~
+ make[3]: *** [Makefile:36581: kern/efi/kernel_exec-sb.o] Error 1
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-11-20 Daniel Axtens <dja@axtens.net>
+
+ docs: grub-install --pubkey has been supported for some time
+ grub-install --pubkey is supported, so we can now document it.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-11-20 Daniel Axtens <dja@axtens.net>
+
+ docs: grub-install is no longer a shell script
+ Since commit cd46aa6cefab in 2013, grub-install hasn't been a shell
+ script. The para doesn't really add that much, especially since it's
+ the user manual, so just drop it.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-10-30 Jacob Kroon <jacob.kroon@gmail.com>
+
+ Makefile: Remove unused GRUB_PKGLIBDIR definition
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-10-30 Daniel Axtens <dja@axtens.net>
+
+ lzma: Fix compilation error under clang 10
+ Compiling under clang 10 gives:
+
+ grub-core/lib/LzmaEnc.c:1362:9: error: misleading indentation; statement is not part of the previous 'if' [-Werror,-Wmisleading-indentation]
+ {
+ ^
+ grub-core/lib/LzmaEnc.c:1358:7: note: previous statement is here
+ if (repIndex == 0)
+ ^
+ 1 error generated.
+
+ It's not really that unclear in context: there's a commented-out
+ if-statement. But tweak the alignment anyway so that clang is happy.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-10-30 Cao jin <caoj.fnst@cn.fujitsu.com>
+
+ kern/i386/realmode: Update comment
+ Commit b81d609e4c did not update it.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-10-30 Glenn Washburn <development@efficientek.com>
+
+ cryptodisk: Fix cipher IV mode "plain64" always being set as "plain"
+ When setting cipher IV mode, detection is done by prefix matching the
+ cipher IV mode part of the cipher mode string. Since "plain" matches
+ "plain64", we must check for "plain64" first. Otherwise, "plain64" will
+ be detected as "plain".
+
+ Reviewed-by: Patrick Steinhardt <ps@pks.im>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-09-18 Glenn Washburn <development@efficientek.com>
+
+ crypto: Remove GPG_ERROR_CFLAGS from gpg_err_code_t enum
+ This was probably added by accident when originally creating the file.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-09-18 Glenn Washburn <development@efficientek.com>
+
+ script: Do not allow a delimiter between function name and block start
+ Currently the following is valid syntax but should be a syntax error:
+
+ grub> function f; { echo HERE; }
+ grub> f
+ HERE
+
+ This fix is not backward compatible, but current syntax is not documented
+ either and has no functional value. So any scripts with this unintended
+ syntax are technically syntactically incorrect and should not be relying
+ on this behavior.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-09-18 Glenn Washburn <development@efficientek.com>
+
+ docs: Support for loading and concatenating multiple initrds
+ This has been available since January of 2012 but has not been documented.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-09-18 Glenn Washburn <development@efficientek.com>
+
+ lexer: char const * should be const char *
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+ cryptodisk: Use cipher name instead of object in error message
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-09-18 Glenn Washburn <development@efficientek.com>
+
+ tests: F2FS test should use MOUNTDEVICE like other tests
+ LODEVICES is not an array variable and should not be accessed as such.
+ This allows the f2fs test to pass as it was failing because a device
+ name had a space prepended to the path.
+
+ Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
+ Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-09-18 Florian La Roche <Florian.LaRoche@gmail.com>
+
+ grub-mkconfig: If $hints is not set reduce the output into grub.cfg to just 1 line
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-09-18 Petr Vorel <pvorel@suse.cz>
+
+ travis: Run bootstrap to fix build
+ autogen.sh isn't enough:
+
+ $ ./autogen.sh
+ Gnulib not yet bootstrapped; run ./bootstrap instead.
+ The command "./autogen.sh" exited with 1.
+
+ Additionally, using bootstrap requires to install autopoint package.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-09-18 Patrick Steinhardt <ps@pks.im>
+
+ luks2: Strip dashes off of the UUID
+ The UUID header for LUKS2 uses a format with dashes, same as for
+ LUKS(1). But while we strip these dashes for the latter, we don't for
+ the former. This isn't wrong per se, but it's definitely inconsistent
+ for users as they need to use the dashed format for LUKS2 and the
+ non-dashed format for LUKS when e.g. calling "cryptomount -u $UUID".
+
+ Fix this inconsistency by stripping dashes off of the LUKS2 UUID.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-09-18 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+
+ efi/tpm: Remove unused functions and structures
+ Although the tpm_execute() series of functions are defined they are not
+ used anywhere. Several structures in the include/grub/efi/tpm.h header
+ file are not used too. There is even nonexistent grub_tpm_init()
+ declaration in this header. Delete all that unneeded stuff.
+
+ If somebody needs the functionality implemented in the dropped code then
+ he/she can re-add it later. Now it needlessly increases the GRUB
+ code/image size.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-09-18 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+
+ shim_lock: Enable module for all EFI architectures
+ Like the tpm the shim_lock module is only enabled for x86_64 target.
+ However, there's nothing specific to x86_64 in the implementation and
+ it can be enabled for all EFI architectures.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-09-18 Daniel Kiper <daniel.kiper@oracle.com>
+
+ efi/tpm: Fix typo in grub_efi_tpm2_protocol struct
+ Rename get_active_pcr_blanks() to get_active_pcr_banks().
+
+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
+
+2020-09-18 Daniel Kiper <daniel.kiper@oracle.com>
+
+ i386/efi/init: Drop bogus include
+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
+
+2020-09-18 Daniel Kiper <daniel.kiper@oracle.com>
+
+ docs: Fix devicetree command description
+ Specifically fix the subsection and drop bogus reference to the GNU/Linux.
+
+ Reported-by: Patrick Higgins <higgi1pt@gmail.com>
+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
+
+2020-09-18 Martin Whitaker <fsf@martin-whitaker.me.uk>
+
+ grub-install: Fix inverted test for NLS enabled when copying locales
+ Commit 3d8439da8 (grub-install: Locale depends on nls) attempted to avoid
+ copying locale files to the target directory when NLS was disabled.
+ However the test is inverted, and it does the opposite.
+
+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
+
+2020-09-11 Javier Martinez Canillas <javierm@redhat.com>
+
+ tftp: Roll-over block counter to prevent data packets timeouts
+ Commit 781b3e5efc3 (tftp: Do not use priority queue) caused a regression
+ when fetching files over TFTP whose size is bigger than 65535 * block size.
+
+ grub> linux /images/pxeboot/vmlinuz
+ grub> echo $?
+ 0
+ grub> initrd /images/pxeboot/initrd.img
+ error: timeout reading '/images/pxeboot/initrd.img'.
+ grub> echo $?
+ 28
+
+ It is caused by the block number counter being a 16-bit field, which leads
+ to a maximum file size of ((1 << 16) - 1) * block size. Because GRUB sets
+ the block size to 1024 octets (by using the TFTP Blocksize Option from RFC
+ 2348 [0]), the maximum file size that can be transferred is 67107840 bytes.
+
+ The TFTP PROTOCOL (REVISION 2) RFC 1350 [1] does not mention what a client
+ should do when a file size is bigger than the maximum, but most TFTP hosts
+ support the block number counter to be rolled over. That is, acking a data
+ packet with a block number of 0 is taken as if the 65356th block was acked.
+
+ It was working before because the block counter roll-over was happening due
+ an overflow. But that got fixed by the mentioned commit, which led to the
+ regression when attempting to fetch files larger than the maximum size.
+
+ To allow TFTP file transfers of unlimited size again, re-introduce a block
+ counter roll-over so the data packets are acked preventing the timeouts.
+
+ [0]: https://tools.ietf.org/html/rfc2348
+ [1]: https://tools.ietf.org/html/rfc1350
+
+ Fixes: 781b3e5efc3 (tftp: Do not use priority queue)
+
+ Suggested-by: Peter Jones <pjones@redhat.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-09-11 Florian La Roche <Florian.LaRoche@gmail.com>
+
+ templates: Remove unnecessary trailing semicolon
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-09-11 Glenn Washburn <development@efficientek.com>
+
+ cryptodisk: Fix incorrect calculation of start sector
+ Here dev is a grub_cryptodisk_t and dev->offset is offset in sectors of size
+ native to the cryptodisk device. The sector is correctly transformed into
+ native grub sector size, but then added to dev->offset which is not
+ transformed. It would be nice if the type system would help us with this.
+
+ Reviewed-by: Patrick Steinhardt <ps@pks.im>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-09-11 Glenn Washburn <development@efficientek.com>
+
+ cryptodisk: Unregister cryptomount command when removing module
+ Reviewed-by: Patrick Steinhardt <ps@pks.im>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-09-11 Patrick Steinhardt <ps@pks.im>
+
+ luks2: Improve error reporting when decrypting/verifying key
+ While we already set up error messages in both luks2_verify_key() and
+ luks2_decrypt_key(), we do not ever print them. This makes it really
+ hard to discover why a given key actually failed to decrypt a disk.
+
+ Improve this by including the error message in the user-visible output.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-09-11 Patrick Steinhardt <ps@pks.im>
+
+ luks: Fix out-of-bounds copy of UUID
+ When configuring a LUKS disk, we copy over the UUID from the LUKS header
+ into the new grub_cryptodisk_t structure via grub_memcpy(). As size
+ we mistakenly use the size of the grub_cryptodisk_t UUID field, which
+ is guaranteed to be strictly bigger than the LUKS UUID field we're
+ copying. As a result, the copy always goes out-of-bounds and copies some
+ garbage from other surrounding fields. During runtime, this isn't
+ noticed due to the fact that we always NUL-terminate the UUID and thus
+ never hit the trailing garbage.
+
+ Fix the issue by using the size of the local stripped UUID field.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-09-11 Patrick Steinhardt <ps@pks.im>
+
+ json: Remove invalid typedef redefinition
+ The C standard does not allow for typedef redefinitions, even if they
+ map to the same underlying type. In order to avoid including the
+ jsmn.h in json.h and thus exposing jsmn's internals, we have exactly
+ such a forward-declaring typedef in json.h. If enforcing the GNU99 C
+ standard, clang may generate a warning about this non-standard
+ construct.
+
+ Fix the issue by using a simple "struct jsmntok" forward declaration
+ instead of using a typedef.
+
+ Tested-by: Chuck Tuffli <chuck@freebsd.org>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-09-11 Cao jin <caoj.fnst@cn.fujitsu.com>
+
+ i386/relocator_common: Drop empty #ifdef
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-09-11 Ave Milia <avemilia@protonmail.com>
+
+ video/bochs: Fix typo
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Colin Watson <cjwatson@debian.org>
+
+ linux: Fix integer overflows in initrd size handling
+ These could be triggered by a crafted filesystem with very large files.
+
+ Fixes: CVE-2020-15707
+
+ Reviewed-by: Jan Setje-Eilers <jan.setjeeilers@oracle.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Peter Jones <pjones@redhat.com>
+
+ loader/linux: Avoid overflow on initrd size calculation
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Alexey Makhalov <amakhalov@vmware.com>
+
+ efi: Fix use-after-free in halt/reboot path
+ commit 92bfc33db984 ("efi: Free malloc regions on exit")
+ introduced memory freeing in grub_efi_fini(), which is
+ used not only by exit path but by halt/reboot one as well.
+ As result of memory freeing, code and data regions used by
+ modules, such as halt, reboot, acpi (used by halt) also got
+ freed. After return to module code, CPU executes, filled
+ by UEFI firmware (tested with edk2), 0xAFAFAFAF pattern as
+ a code. Which leads to #UD exception later.
+
+ grub> halt
+ !!!! X64 Exception Type - 06(#UD - Invalid Opcode) CPU Apic ID - 00000000 !!!!
+ RIP - 0000000003F4EC28, CS - 0000000000000038, RFLAGS - 0000000000200246
+ RAX - 0000000000000000, RCX - 00000000061DA188, RDX - 0A74C0854DC35D41
+ RBX - 0000000003E10E08, RSP - 0000000007F0F860, RBP - 0000000000000000
+ RSI - 00000000064DB768, RDI - 000000000832C5C3
+ R8 - 0000000000000002, R9 - 0000000000000000, R10 - 00000000061E2E52
+ R11 - 0000000000000020, R12 - 0000000003EE5C1F, R13 - 00000000061E0FF4
+ R14 - 0000000003E10D80, R15 - 00000000061E2F60
+ DS - 0000000000000030, ES - 0000000000000030, FS - 0000000000000030
+ GS - 0000000000000030, SS - 0000000000000030
+ CR0 - 0000000080010033, CR2 - 0000000000000000, CR3 - 0000000007C01000
+ CR4 - 0000000000000668, CR8 - 0000000000000000
+ DR0 - 0000000000000000, DR1 - 0000000000000000, DR2 - 0000000000000000
+ DR3 - 0000000000000000, DR6 - 00000000FFFF0FF0, DR7 - 0000000000000400
+ GDTR - 00000000079EEA98 0000000000000047, LDTR - 0000000000000000
+ IDTR - 0000000007598018 0000000000000FFF, TR - 0000000000000000
+ FXSAVE_STATE - 0000000007F0F4C0
+
+ Proposal here is to continue to free allocated memory for
+ exit boot services path but keep it for halt/reboot path
+ as it won't be much security concern here.
+ Introduced GRUB_LOADER_FLAG_EFI_KEEP_ALLOCATED_MEMORY
+ loader flag to be used by efi halt/reboot path.
+
+ Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Daniel Kiper <daniel.kiper@oracle.com>
+
+ efi/chainloader: Propagate errors from copy_file_path()
+ Without any error propagated to the caller, make_file_path()
+ would then try to advance the invalid device path node with
+ GRUB_EFI_NEXT_DEVICE_PATH(), which would fail, returning a NULL
+ pointer that would subsequently be dereferenced. Hence, propagate
+ errors from copy_file_path().
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Peter Jones <pjones@redhat.com>
+
+ efi: Fix some malformed device path arithmetic errors
+ Several places we take the length of a device path and subtract 4 from
+ it, without ever checking that it's >= 4. There are also cases where
+ this kind of malformation will result in unpredictable iteration,
+ including treating the length from one dp node as the type in the next
+ node. These are all errors, no matter where the data comes from.
+
+ This patch adds a checking macro, GRUB_EFI_DEVICE_PATH_VALID(), which
+ can be used in several places, and makes GRUB_EFI_NEXT_DEVICE_PATH()
+ return NULL and GRUB_EFI_END_ENTIRE_DEVICE_PATH() evaluate as true when
+ the length is too small. Additionally, it makes several places in the
+ code check for and return errors in these cases.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Peter Jones <pjones@redhat.com>
+
+ emu: Make grub_free(NULL) safe
+ The grub_free() implementation in grub-core/kern/mm.c safely handles
+ NULL pointers, and code at many places depends on this. We don't know
+ that the same is true on all host OSes, so we need to handle the same
+ behavior in grub-emu's implementation.
+
+ Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Peter Jones <pjones@redhat.com>
+
+ lvm: Fix two more potential data-dependent alloc overflows
+ It appears to be possible to make a (possibly invalid) lvm PV with
+ a metadata size field that overflows our type when adding it to the
+ address we've allocated. Even if it doesn't, it may be possible to do so
+ with the math using the outcome of that as an operand. Check them both.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Peter Jones <pjones@redhat.com>
+
+ hfsplus: Fix two more overflows
+ Both node->size and node->namelen come from the supplied filesystem,
+ which may be user-supplied. We can't trust them for the math unless we
+ know they don't overflow. Making sure they go through grub_add() or
+ grub_calloc() first will give us that.
+
+ Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Alexey Makhalov <amakhalov@vmware.com>
+
+ relocator: Fix grub_relocator_alloc_chunk_align() top memory allocation
+ Current implementation of grub_relocator_alloc_chunk_align()
+ does not allow allocation of the top byte.
+
+ Assuming input args are:
+ max_addr = 0xfffff000;
+ size = 0x1000;
+
+ And this is valid. But following overflow protection will
+ unnecessarily move max_addr one byte down (to 0xffffefff):
+ if (max_addr > ~size)
+ max_addr = ~size;
+
+ ~size + 1 will fix the situation. In addition, check size
+ for non zero to do not zero max_addr.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Chris Coulson <chris.coulson@canonical.com>
+
+ script: Avoid a use-after-free when redefining a function during execution
+ Defining a new function with the same name as a previously defined
+ function causes the grub_script and associated resources for the
+ previous function to be freed. If the previous function is currently
+ executing when a function with the same name is defined, this results
+ in use-after-frees when processing subsequent commands in the original
+ function.
+
+ Instead, reject a new function definition if it has the same name as
+ a previously defined function, and that function is currently being
+ executed. Although a behavioural change, this should be backwards
+ compatible with existing configurations because they can't be
+ dependent on the current behaviour without being broken.
+
+ Fixes: CVE-2020-15706
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Chris Coulson <chris.coulson@canonical.com>
+
+ script: Remove unused fields from grub_script_function struct
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Alexey Makhalov <amakhalov@vmware.com>
+
+ relocator: Protect grub_relocator_alloc_chunk_align() max_addr against integer underflow
+ This commit introduces integer underflow mitigation in max_addr calculation
+ in grub_relocator_alloc_chunk_align() invocation.
+
+ It consists of 2 fixes:
+ 1. Introduced grub_relocator_alloc_chunk_align_safe() wrapper function to perform
+ sanity check for min/max and size values, and to make safe invocation of
+ grub_relocator_alloc_chunk_align() with validated max_addr value. Replace all
+ invocations such as grub_relocator_alloc_chunk_align(..., min_addr, max_addr - size, size, ...)
+ by grub_relocator_alloc_chunk_align_safe(..., min_addr, max_addr, size, ...).
+ 2. Introduced UP_TO_TOP32(s) macro for the cases where max_addr is 32-bit top
+ address (0xffffffff - size + 1) or similar.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Alexey Makhalov <amakhalov@vmware.com>
+
+ relocator: Protect grub_relocator_alloc_chunk_addr() input args against integer underflow/overflow
+ Use arithmetic macros from safemath.h to accomplish it. In this commit,
+ I didn't want to be too paranoid to check every possible math equation
+ for overflow/underflow. Only obvious places (with non zero chance of
+ overflow/underflow) were refactored.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Alexey Makhalov <amakhalov@vmware.com>
+
+ tftp: Do not use priority queue
+ There is not need to reassemble the order of blocks. Per RFC 1350,
+ server must wait for the ACK, before sending next block. Data packets
+ can be served immediately without putting them to priority queue.
+
+ Logic to handle incoming packet is this:
+ - if packet block id equal to expected block id, then
+ process the packet,
+ - if packet block id is less than expected - this is retransmit
+ of old packet, then ACK it and drop the packet,
+ - if packet block id is more than expected - that shouldn't
+ happen, just drop the packet.
+
+ It makes the tftp receive path code simpler, smaller and faster.
+ As a benefit, this change fixes CID# 73624 and CID# 96690, caused
+ by following while loop:
+
+ while (cmp_block (grub_be_to_cpu16 (tftph->u.data.block), data->block + 1) == 0)
+
+ where tftph pointer is not moving from one iteration to another, causing
+ to serve same packet again. Luckily, double serving didn't happen due to
+ data->block++ during the first iteration.
+
+ Fixes: CID 73624, CID 96690
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+
+ multiboot2: Fix memory leak if grub_create_loader_cmdline() fails
+ Fixes: CID 292468
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+
+ udf: Fix memory leak
+ Fixes: CID 73796
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Reviewed-by: Jan Setje-Eilers <jan.setjeeilers@oracle.com>
+
+2020-07-29 Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+
+ term: Fix overflow on user inputs
+ This requires a very weird input from the serial interface but can cause
+ an overflow in input_buf (keys) overwriting the next variable (npending)
+ with the user choice:
+
+ (pahole output)
+
+ struct grub_terminfo_input_state {
+ int input_buf[6]; /* 0 24 */
+ int npending; /* 24 4 */ <- CORRUPT
+ ...snip...
+
+ The magic string requires causing this is "ESC,O,],0,1,2,q" and we overflow
+ npending with "q" (aka increase npending to 161). The simplest fix is to
+ just to disallow overwrites input_buf, which exactly what this patch does.
+
+ Fixes: CID 292449
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+
+ lzma: Make sure we don't dereference past array
+ The two dimensional array p->posSlotEncoder[4][64] is being dereferenced
+ using the GetLenToPosState() macro which checks if len is less than 5,
+ and if so subtracts 2 from it. If len = 0, that is 0 - 2 = 4294967294.
+ Obviously we don't want to dereference that far out so we check if the
+ position found is greater or equal kNumLenToPosStates (4) and bail out.
+
+ N.B.: Upstream LZMA 18.05 and later has this function completely rewritten
+ without any history.
+
+ Fixes: CID 51526
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Chris Coulson <chris.coulson@canonical.com>
+
+ json: Avoid a double-free when parsing fails.
+ When grub_json_parse() succeeds, it returns the root object which
+ contains a pointer to the provided JSON string. Callers are
+ responsible for ensuring that this string outlives the root
+ object and for freeing its memory when it's no longer needed.
+
+ If grub_json_parse() fails to parse the provided JSON string,
+ it frees the string before returning an error. This results
+ in a double free in luks2_recover_key(), which also frees the
+ same string after grub_json_parse() returns an error.
+
+ This changes grub_json_parse() to never free the JSON string
+ passed to it, and updates the documentation for it to make it
+ clear that callers are responsible for ensuring that the string
+ outlives the root JSON object.
+
+ Fixes: CID 292465
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Alexey Makhalov <amakhalov@vmware.com>
+
+ xnu: Fix double free in grub_xnu_devprop_add_property()
+ grub_xnu_devprop_add_property() should not free utf8 and utf16 as it get
+ allocated and freed in the caller.
+
+ Minor improvement: do prop fields initialization after memory allocations.
+
+ Fixes: CID 292442, CID 292457, CID 292460, CID 292466
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Alexey Makhalov <amakhalov@vmware.com>
+
+ gfxmenu: Fix double free in load_image()
+ self->bitmap should be zeroed after free. Otherwise, there is a chance
+ to double free (USE_AFTER_FREE) it later in rescale_image().
+
+ Fixes: CID 292472
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Daniel Kiper <daniel.kiper@oracle.com>
+
+ font: Do not load more than one NAME section
+ The GRUB font file can have one NAME section only. Though if somebody
+ crafts a broken font file with many NAME sections and loads it then the
+ GRUB leaks memory. So, prevent against that by loading first NAME
+ section and failing in controlled way on following one.
+
+ Reported-by: Chris Coulson <chris.coulson@canonical.com>
+ Reviewed-by: Jan Setje-Eilers <jan.setjeeilers@oracle.com>
+
+2020-07-29 Peter Jones <pjones@redhat.com>
+
+ iso9660: Don't leak memory on realloc() failures
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Peter Jones <pjones@redhat.com>
+
+ malloc: Use overflow checking primitives where we do complex allocations
+ This attempts to fix the places where we do the following where
+ arithmetic_expr may include unvalidated data:
+
+ X = grub_malloc(arithmetic_expr);
+
+ It accomplishes this by doing the arithmetic ahead of time using grub_add(),
+ grub_sub(), grub_mul() and testing for overflow before proceeding.
+
+ Among other issues, this fixes:
+ - allocation of integer overflow in grub_video_bitmap_create()
+ reported by Chris Coulson,
+ - allocation of integer overflow in grub_png_decode_image_header()
+ reported by Chris Coulson,
+ - allocation of integer overflow in grub_squash_read_symlink()
+ reported by Chris Coulson,
+ - allocation of integer overflow in grub_ext2_read_symlink()
+ reported by Chris Coulson,
+ - allocation of integer overflow in read_section_as_string()
+ reported by Chris Coulson.
+
+ Fixes: CVE-2020-14309, CVE-2020-14310, CVE-2020-14311
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Peter Jones <pjones@redhat.com>
+
+ calloc: Use calloc() at most places
+ This modifies most of the places we do some form of:
+
+ X = malloc(Y * Z);
+
+ to use calloc(Y, Z) instead.
+
+ Among other issues, this fixes:
+ - allocation of integer overflow in grub_png_decode_image_header()
+ reported by Chris Coulson,
+ - allocation of integer overflow in luks_recover_key()
+ reported by Chris Coulson,
+ - allocation of integer overflow in grub_lvm_detect()
+ reported by Chris Coulson.
+
+ Fixes: CVE-2020-14308
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Peter Jones <pjones@redhat.com>
+
+ calloc: Make sure we always have an overflow-checking calloc() available
+ This tries to make sure that everywhere in this source tree, we always have
+ an appropriate version of calloc() (i.e. grub_calloc(), xcalloc(), etc.)
+ available, and that they all safely check for overflow and return NULL when
+ it would occur.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Peter Jones <pjones@redhat.com>
+
+ safemath: Add some arithmetic primitives that check for overflow
+ This adds a new header, include/grub/safemath.h, that includes easy to
+ use wrappers for __builtin_{add,sub,mul}_overflow() declared like:
+
+ bool OP(a, b, res)
+
+ where OP is grub_add, grub_sub or grub_mul. OP() returns true in the
+ case where the operation would overflow and res is not modified.
+ Otherwise, false is returned and the operation is executed.
+
+ These arithmetic primitives require newer compiler versions. So, bump
+ these requirements in the INSTALL file too.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-07-29 Peter Jones <pjones@redhat.com>
+
+ yylex: Make lexer fatal errors actually be fatal
+ When presented with a command that can't be tokenized to anything
+ smaller than YYLMAX characters, the parser calls YY_FATAL_ERROR(errmsg),
+ expecting that will stop further processing, as such:
+
+ #define YY_DO_BEFORE_ACTION \
+ yyg->yytext_ptr = yy_bp; \
+ yyleng = (int) (yy_cp - yy_bp); \
+ yyg->yy_hold_char = *yy_cp; \
+ *yy_cp = '\0'; \
+ if ( yyleng >= YYLMAX ) \
+ YY_FATAL_ERROR( "token too large, exceeds YYLMAX" ); \
+ yy_flex_strncpy( yytext, yyg->yytext_ptr, yyleng + 1 , yyscanner); \
+ yyg->yy_c_buf_p = yy_cp;
+
+ The code flex generates expects that YY_FATAL_ERROR() will either return
+ for it or do some form of longjmp(), or handle the error in some way at
+ least, and so the strncpy() call isn't in an "else" clause, and thus if
+ YY_FATAL_ERROR() is *not* actually fatal, it does the call with the
+ questionable limit, and predictable results ensue.
+
+ Unfortunately, our implementation of YY_FATAL_ERROR() is:
+
+ #define YY_FATAL_ERROR(msg) \
+ do { \
+ grub_printf (_("fatal error: %s\n"), _(msg)); \
+ } while (0)
+
+ The same pattern exists in yyless(), and similar problems exist in users
+ of YY_INPUT(), several places in the main parsing loop,
+ yy_get_next_buffer(), yy_load_buffer_state(), yyensure_buffer_stack,
+ yy_scan_buffer(), etc.
+
+ All of these callers expect YY_FATAL_ERROR() to actually be fatal, and
+ the things they do if it returns after calling it are wildly unsafe.
+
+ Fixes: CVE-2020-10713
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-05-25 Marc Zyngier <maz@kernel.org>
+
+ arm: Fix 32-bit ARM handling of the CTR register
+ When booting on an ARMv8 core that implements either CTR.IDC or CTR.DIC
+ (indicating that some of the cache maintenance operations can be
+ removed when dealing with I/D-cache coherency, GRUB dies with a
+ "Unsupported cache type 0x........" message.
+
+ This is pretty likely to happen when running in a virtual machine
+ hosted on an arm64 machine (I've triggered it on a system built around
+ a bunch of Cortex-A55 cores, which implements CTR.IDC).
+
+ It turns out that the way GRUB deals with the CTR register is a bit
+ harsh for anything from ARMv7 onwards. The layout of the register is
+ backward compatible, meaning that nothing that gets added is allowed to
+ break earlier behaviour. In this case, ignoring IDC is completely fine,
+ and only results in unnecessary cache maintenance.
+
+ We can thus avoid being paranoid, and align the 32bit behaviour with
+ its 64bit equivalent.
+
+ This patch has the added benefit that it gets rid of a (gnu-specific)
+ case range too.
+
+ Reviewed-by: Leif Lindholm <leif@nuviainc.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-05-25 Ian Jackson <ian.jackson@eu.citrix.com>
+
+ templates/20_linux_xen: Support Xen Security Modules (XSM/FLASK)
+ XSM is enabled by adding "flask=enforcing" as a Xen command line
+ argument, and providing the policy file as a grub module.
+
+ We make entries for both with and without XSM. If XSM is not compiled
+ into Xen, then there are no policy files, so no change to the boot
+ options.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-05-25 Ian Jackson <ian.jackson@eu.citrix.com>
+
+ templates/20_linux_xen: Ignore xenpolicy and config files too
+ file_is_not_sym() currently only checks for xen-syms. Extend it to
+ disregard xenpolicy (XSM policy files) and files ending .config (which
+ are built by the Xen upstream build system in some configurations and
+ can therefore end up in /boot).
+
+ Rename the function accordingly, to file_is_not_xen_garbage().
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-05-25 Javier Martinez Canillas <javierm@redhat.com>
+
+ net: Break out nested function
+ Nested functions are not supported in C, but are permitted as an extension
+ in the GNU C dialect. Commit cb2f15c5448 ("normal/main: Search for specific
+ config files for netboot") added a nested function which caused the build
+ to break when compiling with clang.
+
+ Break that out into a static helper function to make the code portable again.
+
+ Reported-by: Daniel Axtens <dja@axtens.net>
+ Tested-by: Daniel Axtens <dja@axtens.net>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-05-25 Javier Martinez Canillas <javierm@redhat.com>
+
+ tpm: Enable module for all EFI platforms
+ The module is only enabled for x86_64, but there's nothing specific to
+ x86_64 in the implementation and can be enabled for all EFI platforms.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-05-25 Daniel Kiper <daniel.kiper@oracle.com>
+
+ INSTALL/configure: Update install doc and configure comment
+ ..to reflect the GRUB build reality in them.
+
+ Additionally, fix text formatting a bit.
+
+ Reviewed-by: Leif Lindholm <leif@nuviainc.com>
+
+2020-05-25 Daniel Kiper <daniel.kiper@oracle.com>
+
+ configure: Set gnu99 C language standard by default
+ Commit d5a32255d (misc: Make grub_strtol() "end" pointers have safer
+ const qualifiers) introduced "restrict" keyword into some functions
+ definitions. This keyword was introduced in C99 standard. However, some
+ compilers by default may use C89 or something different. This behavior
+ leads to the breakage during builds when c89 or gnu89 is in force. So,
+ let's set gnu99 C language standard for all compilers by default. This
+ way a bit random build issue will be fixed and the GRUB source will be
+ build consistently regardless of type and version of the compiler.
+
+ It was decided to use gnu99 C language standard because it fixes the
+ issue mentioned above and also provides some useful extensions which are
+ used here and there in the GRUB source. Potentially we can use gnu11
+ too. However, this may reduce pool of older compilers which can be used
+ to build the GRUB. So, let's live with gnu99 until we discover that we
+ strongly require a feature from newer C standard.
+
+ The user is still able to override C language standard using relevant
+ *_CFLAGS variables.
+
+ Reviewed-by: Leif Lindholm <leif@nuviainc.com>
+
+2020-05-15 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+
+ tpm: Rename function grub_tpm_log_event() to grub_tpm_measure()
+ grub_tpm_log_event() and grub_tpm_measure() are two functions that
+ have the same effect. So, keep grub_tpm_log_event() and rename it
+ to grub_tpm_measure(). This way we get also a more clear semantics.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-05-15 Daniel Kiper <daniel.kiper@oracle.com>
+
+ autogen: Replace -iname with -ipath in find command
+ ..because -iname cannot be used to match paths.
+
+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
+ Reviewed-by: Leif Lindholm <leif@nuviainc.com>
+ Reviewed-by: Daniel Axtens <dja@axtens.net>
+
+2020-05-15 Daniel Kiper <daniel.kiper@oracle.com>
+
+ INSTALL: Update configure example
+ ..to make it more relevant.
+
+ Reviewed-by: Leif Lindholm <leif@nuviainc.com>
+
+2020-05-15 Daniel Kiper <daniel.kiper@oracle.com>
+
+ configure: Drop unneeded TARGET_CFLAGS expansion
+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
+ Reviewed-by: Leif Lindholm <leif@nuviainc.com>
+
+2020-05-15 Jacob Kroon <jacob.kroon@gmail.com>
+
+ docs/grub: Support for probing partition UUID on MSDOS disks
+ Support was implemented in commit c7cb11b21 (probe: Support probing for
+ msdos PARTUUID).
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-05-15 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+
+ verifiers: Add verify string debug message
+ Like grub_verifiers_open(), the grub_verify_string() should also
+ display this debug message, which is very helpful for debugging.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-05-15 Javier Martinez Canillas <javierm@redhat.com>
+
+ envblk: Fix buffer overrun when attempting to shrink a variable value
+ If an existing variable is set with a value whose length is smaller than
+ the current value, a memory corruption can happen due copying padding '#'
+ characters outside of the environment block buffer.
+
+ This is caused by a wrong calculation of the previous free space position
+ after moving backward the characters that followed the old variable value.
+
+ That position is calculated to fill the remaining of the buffer with the
+ padding '#' characters. But since isn't calculated correctly, it can lead
+ to copies outside of the buffer.
+
+ The issue can be reproduced by creating a variable with a large value and
+ then try to set a new value that is much smaller:
+
+ $ grub2-editenv --version
+ grub2-editenv (GRUB) 2.04
+
+ $ grub2-editenv env create
+
+ $ grub2-editenv env set a="$(for i in {1..500}; do var="b$var"; done; echo $var)"
+
+ $ wc -c env
+ 1024 grubenv
+
+ $ grub2-editenv env set a="$(for i in {1..50}; do var="b$var"; done; echo $var)"
+ malloc(): corrupted top size
+ Aborted (core dumped)
+
+ $ wc -c env
+ 0 grubenv
+
+ Reported-by: Renaud Métrich <rmetrich@redhat.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-05-15 Hans Ulrich Niedermann <hun@n-dimensional.de>
+
+ docs: Remove docs for non-existing uppermem command
+ Remove all documentation of and mentions of the uppermem
+ command from the docs/grub.texi file.
+
+ The uppermem command is not implemented in the GRUB source
+ at all and appears to never have been implemented despite
+ former plans to add an uppermem command.
+
+ To reduce user confusion, this even removes the paragraph
+ describing how GRUB's uppermem command was supposed to
+ complement the Linux kernel's mem= parameter.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-05-15 Hans Ulrich Niedermann <hun@n-dimensional.de>
+
+ docs: Remove docs for non-existing pxe_unload command
+ Remove the documentation of the pxe_unload command from the
+ docs/grub.texi file.
+
+ The pxe_unload command is not implemented in the grub source
+ at this time at all. It appears to have been removed in commit
+ 671a78acb (cleanup pxe and efi network release).
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-05-15 Hans Ulrich Niedermann <hun@n-dimensional.de>
+
+ gitignore: Add a few forgotten file patterns
+ Add a few patterns to .gitignore to cover files which are generated
+ by building grub ("make", "make check", "make dist") but which have
+ been forgotten to add to .gitignore in the past.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-05-15 Hans Ulrich Niedermann <hun@n-dimensional.de>
+
+ gitignore: Add leading slashes where appropriate
+ Going through the list of gitignore patterns without a leading slash,
+ this adds a leading slash where it appears to have been forgotten.
+
+ Some gitignore patterns like ".deps/" or "Makefile" clearly should
+ match everywhere, so those definitively need no leading slash.
+
+ For some patterns like "ascii.bitmaps", it is unclear where in the
+ source tree they should match. Those patterns are kept as they are,
+ matching the patterns in the whole tree of subdirectories.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-05-15 Hans Ulrich Niedermann <hun@n-dimensional.de>
+
+ gitignore: Add trailing slashes for directories
+ Add trailing slashes for all patterns matching directories.
+
+ Note that we do *not* add trailing slashes for *symlinks*
+ to directories.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-05-15 Hans Ulrich Niedermann <hun@n-dimensional.de>
+
+ gitignore: Sort both pattern groups alphabetically
+ Alphabetically sort the two groups of gitignore patterns:
+
+ * The group of patterns without slashes, matching anywhere
+ in the directory subtree.
+
+ * The group of patterns with slashes, matching relative to the
+ .gitignore file's directory
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-05-15 Hans Ulrich Niedermann <hun@n-dimensional.de>
+
+ gitignore: Group patterns with and without slash
+ Group the .gitignore patterns into two groups:
+
+ * Pattern not including a slash, i.e. matching files anywhere in
+ the .gitignore file's directory and all of its subdirectories.
+
+ * Patterns including a slash, i.e. matching only relative to the
+ .gitignore file's directory.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-05-15 Hans Ulrich Niedermann <hun@n-dimensional.de>
+
+ gitignore: Consistent leading slash is easier to read
+ As all gitignore patterns containing a left or middle slash match
+ only relative to the .gitignore file's directory, we write them
+ all in the same manner with a leading slash.
+
+ This makes the file significantly easier to read.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-05-15 Daniel Kiper <daniel.kiper@oracle.com>
+
+ mips/cache: Add missing nop's in delay slots
+ Lack of them causes random instructions to be executed before the
+ jump really happens.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-04-21 Patrick Steinhardt <ps@pks.im>
+
+ luks2: Propagate error when reading area key fails
+ When decrypting a given keyslot, all error cases except for one set up
+ an error and return the error code. The only exception is when we try to
+ read the area key: instead of setting up an error message, we directly
+ print it via grub_dprintf().
+
+ Convert the outlier to use grub_error() to allow more uniform handling
+ of errors.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-04-21 Patrick Steinhardt <ps@pks.im>
+
+ json: Get rid of casts for "jsmntok_t"
+ With the upstream change having landed that adds a name to the
+ previously anonymous "jsmntok" typedef, we can now add a forward
+ declaration for that struct in our code. As a result, we no longer have
+ to store the "tokens" member of "struct grub_json" as a void pointer but
+ can instead use the forward declaration, allowing us to get rid of casts
+ of that field.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-04-21 Patrick Steinhardt <ps@pks.im>
+
+ json: Update jsmn library to upstream commit 053d3cd
+ Update our embedded version of the jsmn library to upstream commit
+ 053d3cd (Merge pull request #175 from pks-t/pks/struct-type,
+ 2020-04-02).
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-04-21 Steve Langasek <steve.langasek@ubuntu.com>
+
+ templates: Output a menu entry for firmware setup on UEFI FastBoot systems
+ The fwsetup command allows to reboot into the EFI firmware setup menu, add
+ a template to include a menu entry on EFI systems that makes use of that
+ command to reboot into the EFI firmware settings.
+
+ This is useful for users since the hotkey to enter into the EFI setup menu
+ may not be the same on all systems so users can use the menu entry without
+ needing to figure out what key needs to be pressed.
+
+ Also, if fastboot is enabled in the BIOS then often it is not possible to
+ enter the firmware setup menu. So the entry is again useful for this case.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-04-21 Hans de Goede <hdegoede@redhat.com>
+
+ kern/term: Accept ESC, F4 and holding SHIFT as user interrupt keys
+ On some devices the ESC key is the hotkey to enter the BIOS/EFI setup
+ screen, making it really hard to time pressing it right. Besides that
+ ESC is also pretty hard to discover for a user who does not know it
+ will unhide the menu.
+
+ This commit makes F4, which was chosen because is not used as a hotkey
+ to enter the BIOS setup by any vendor, also interrupt sleeps / stop the
+ menu countdown.
+
+ This solves the ESC gets into the BIOS setup and also somewhat solves
+ the discoverability issue, but leaves the timing issue unresolved.
+
+ This commit fixes the timing issue by also adding support for keeping
+ SHIFT pressed during boot to stop the menu countdown. This matches
+ what Ubuntu is doing, which should also help with discoverability.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-04-21 Hans de Goede <hdegoede@redhat.com>
+
+ efi/console: Do not set text-mode until we actually need it
+ If we're running with a hidden menu we may never need text mode, so do not
+ change the video-mode to text until we actually need it.
+
+ This allows to boot a machine without unnecessary graphical transitions and
+ provide a seamless boot experience to users.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-04-21 Hans de Goede <hdegoede@redhat.com>
+
+ efi/console: Implement getkeystatus() support
+ Implement getkeystatus() support in the EFI console driver.
+
+ This is needed because the logic to determine if a key was pressed to make
+ the menu countdown stop will be changed by a later patch to also take into
+ account the SHIFT key being held down.
+
+ For this reason the EFI console driver has to support getkeystatus() to
+ allow detecting that event.
+
+ Note that if a non-modifier key gets pressed and repeated calls to
+ getkeystatus() are made then it will return the modifier status at the
+ time of the non-modifier key, until that key-press gets consumed by a
+ getkey() call.
+
+ This is a side-effect of how the EFI simple-text-input protocol works
+ and cannot be avoided.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-04-21 Hans de Goede <hdegoede@redhat.com>
+
+ efi/console: Add grub_console_read_key_stroke() helper function
+ This is a preparatory patch for adding getkeystatus() support to the
+ EFI console driver.
+
+ We can get modifier status through the simple_text_input read_key_stroke()
+ method, but if a non-modifier key is (also) pressed the read_key_stroke()
+ call will consume that key from the firmware's queue.
+
+ The new grub_console_read_key_stroke() helper buffers upto 1 key-stroke.
+ If it has a non-modifier key buffered, it will return that one, if its
+ buffer is empty, it will fills its buffer by getting a new key-stroke.
+
+ If called with consume=1 it will empty its buffer after copying the
+ key-data to the callers buffer, this is how getkey() will use it.
+
+ If called with consume=0 it will keep the last key-stroke buffered, this
+ is how getkeystatus() will call it. This means that if a non-modifier
+ key gets pressed, repeated getkeystatus() calls will return the modifiers
+ of that key-press until it is consumed by a getkey() call.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-04-21 Hans de Goede <hdegoede@redhat.com>
+
+ kern/term: Make grub_getkeystatus() helper function available everywhere
+ Move grub_getkeystatushelper() function from grub-core/commands/keystatus.c
+ to grub-core/kern/term.c and export it so that it can be used outside of
+ the keystatus command code too.
+
+ There's no logic change in this patch. The function definition is moved so
+ it can be called from grub-core/kern/term.c in a subsequent patch. It will
+ be used to determine if a SHIFT key has was held down and use that also to
+ interrupt the countdown, without the need to press a key at the right time.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-04-21 Javier Martinez Canillas <javierm@redhat.com>
+
+ efi/console: Move grub_console_set{colorstate,cursor} higher in the file
+ This is just a preparatory patch to move the functions higher in the file,
+ since these will be called by the grub_prepare_for_text_output() function
+ that will be introduced in a later patch.
+
+ The logic is unchanged by this patch. Functions definitions are just moved
+ to avoid a forward declaration in a later patch, keeping the code clean.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-04-21 Paul Menzel <pmenzel@molgen.mpg.de>
+
+ docs/grub: Fix typo in *preferred*
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-04-21 Daniel Axtens <dja@axtens.net>
+
+ powerpc/mkimage: Fix CHRP note descsz
+ Currently, an image generated with 'grub-mkimage -n' causes an error when
+ read with 'readelf -a':
+
+ Displaying notes found at file offset 0x000106f0 with length 0x0000002c:
+ Owner Data size Description
+ readelf: Warning: note with invalid namesz and/or descsz found at offset 0x0
+ readelf: Warning: type: 0x1275, namesize: 0x00000008, descsize: 0x0000002c, alignment: 4
+
+ This is because the descsz of the CHRP note is set to
+ sizeof (struct grub_ieee1275_note)
+ which is the size of the entire note, including name and elf header. The
+ desczs should contain only the contents, not the name and header sizes.
+
+ Set the descsz instead to 'sizeof (struct grub_ieee1275_note_desc)'
+
+ Resultant readelf output:
+
+ Displaying notes found at file offset 0x00010710 with length 0x0000002c:
+ Owner Data size Description
+ PowerPC 0x00000018 Unknown note type: (0x00001275)
+ description data: ff ff ff ff 00 c0 00 00 ff ff ff ff ff ff ff ff ff ff ff ff 00 00 40 00
+
+ So far as I can tell this issue has existed for as long as the note
+ generation code has existed, but I guess nothing really checks descsz.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-31 Flavio Suligoi <f.suligoi@asem.it>
+
+ efi: Add missed space in GRUB_EFI_GLOBAL_VARIABLE_GUID
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-31 Michael Chang <mchang@suse.com>
+
+ zfs: Fix gcc10 error -Werror=zero-length-bounds
+ We bumped into the build error while testing gcc-10 pre-release.
+
+ In file included from ../../include/grub/file.h:22,
+ from ../../grub-core/fs/zfs/zfs.c:34:
+ ../../grub-core/fs/zfs/zfs.c: In function 'zap_leaf_lookup':
+ ../../grub-core/fs/zfs/zfs.c:2263:44: error: array subscript '<unknown>' is outside the bounds of an interior zero-length array 'grub_uint16_t[0]' {aka 'short unsigned int[0]'} [-Werror=zero-length-bounds]
+ 2263 | for (chunk = grub_zfs_to_cpu16 (l->l_hash[LEAF_HASH (blksft, h, l)], endian);
+ ../../include/grub/types.h:241:48: note: in definition of macro 'grub_le_to_cpu16'
+ 241 | # define grub_le_to_cpu16(x) ((grub_uint16_t) (x))
+ | ^
+ ../../grub-core/fs/zfs/zfs.c:2263:16: note: in expansion of macro 'grub_zfs_to_cpu16'
+ 2263 | for (chunk = grub_zfs_to_cpu16 (l->l_hash[LEAF_HASH (blksft, h, l)], endian);
+ | ^~~~~~~~~~~~~~~~~
+ In file included from ../../grub-core/fs/zfs/zfs.c:48:
+ ../../include/grub/zfs/zap_leaf.h:72:16: note: while referencing 'l_hash'
+ 72 | grub_uint16_t l_hash[0];
+ | ^~~~~~
+
+ Here I'd like to quote from the gcc document [1] which seems best to
+ explain what is going on here.
+
+ "Although the size of a zero-length array is zero, an array member of
+ this kind may increase the size of the enclosing type as a result of
+ tail padding. The offset of a zero-length array member from the
+ beginning of the enclosing structure is the same as the offset of an
+ array with one or more elements of the same type. The alignment of a
+ zero-length array is the same as the alignment of its elements.
+
+ Declaring zero-length arrays in other contexts, including as interior
+ members of structure objects or as non-member objects, is discouraged.
+ Accessing elements of zero-length arrays declared in such contexts is
+ undefined and may be diagnosed."
+
+ The l_hash[0] is apparnetly an interior member to the enclosed structure
+ while l_entries[0] is the trailing member. And the offending code tries
+ to access members in l_hash[0] array that triggers the diagnose.
+
+ Given that the l_entries[0] is used to get proper alignment to access
+ leaf chunks, we can accomplish the same thing through the ALIGN_UP macro
+ thus eliminating l_entries[0] from the structure. In this way we can
+ pacify the warning as l_hash[0] now becomes the last member to the
+ enclosed structure.
+
+ [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-31 Michael Chang <mchang@suse.com>
+
+ mdraid1x_linux: Fix gcc10 error -Werror=array-bounds
+ We bumped into the build error while testing gcc-10 pre-release.
+
+ ../../grub-core/disk/mdraid1x_linux.c: In function 'grub_mdraid_detect':
+ ../../grub-core/disk/mdraid1x_linux.c:181:15: error: array subscript <unknown> is outside array bounds of 'grub_uint16_t[0]' {aka 'short unsigned int[0]'} [-Werror=array-bounds]
+ 181 | (char *) &sb.dev_roles[grub_le_to_cpu32 (sb.dev_number)]
+ | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ ../../grub-core/disk/mdraid1x_linux.c:98:17: note: while referencing 'dev_roles'
+ 98 | grub_uint16_t dev_roles[0]; /* Role in array, or 0xffff for a spare, or 0xfffe for faulty. */
+ | ^~~~~~~~~
+ ../../grub-core/disk/mdraid1x_linux.c:127:33: note: defined here 'sb'
+ 127 | struct grub_raid_super_1x sb;
+ | ^~
+ cc1: all warnings being treated as errors
+
+ Apparently gcc issues the warning when trying to access sb.dev_roles
+ array's member, since it is a zero length array as the last element of
+ struct grub_raid_super_1x that is allocated sparsely without extra
+ chunks for the trailing bits, so the warning looks legitimate in this
+ regard.
+
+ As the whole thing here is doing offset computation, it is undue to use
+ syntax that would imply array member access then take address from it
+ later. Instead we could accomplish the same thing through basic array
+ pointer arithmetic to pacify the warning.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-31 Simon Hardy <simon.hardy@itdev.co.uk>
+
+ build: Fix GRUB i386-pc build with Ubuntu gcc
+ With recent versions of gcc on Ubuntu a very large lzma_decompress.img file is
+ output. (e.g. 134479600 bytes instead of 2864.) This causes grub-mkimage to
+ fail with: "error: Decompressor is too big."
+
+ This seems to be caused by a section .note.gnu.property that is placed at an
+ offset such that objcopy needs to pad the img file with zeros.
+
+ This issue is present on:
+ Ubuntu 19.10 with gcc (Ubuntu 8.3.0-26ubuntu1~19.10) 8.3.0
+ Ubuntu 19.10 with gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008
+
+ This issue is not present on:
+ Ubuntu 19.10 with gcc (Ubuntu 7.5.0-3ubuntu1~19.10) 7.5.0
+ RHEL 8.0 with gcc 8.3.1 20190507 (Red Hat 8.3.1-4)
+
+ The issue can be fixed by removing the section using objcopy as shown in
+ this patch.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-31 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+
+ efi/tpm: Fix memory leak in grub_tpm1/2_log_event()
+ The memory requested for the event is not released here,
+ causing memory leaks. This patch fixes this problem.
+
+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-31 Michael Chang <mchang@suse.com>
+
+ docs: Document notes on LVM cache booting
+ Add notes on LVM cache booting to the GRUB manual to help user understanding
+ the outstanding issue and status.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-31 Michael Chang <mchang@suse.com>
+
+ lvm: Add LVM cache logical volume handling
+ The LVM cache logical volume is the logical volume consisting of the original
+ and the cache pool logical volume. The original is usually on a larger and
+ slower storage device while the cache pool is on a smaller and faster one. The
+ performance of the original volume can be improved by storing the frequently
+ used data on the cache pool to utilize the greater performance of faster
+ device.
+
+ The default cache mode "writethrough" ensures that any data written will be
+ stored both in the cache and on the origin LV, therefore grub can be straight
+ to read the original lv as no data loss is guarenteed.
+
+ The second cache mode is "writeback", which delays writing from the cache pool
+ back to the origin LV to have increased performance. The drawback is potential
+ data loss if losing the associated cache device.
+
+ During the boot time grub reads the LVM offline i.e. LVM volumes are not
+ activated and mounted, hence it should be fine to read directly from original
+ lv since all cached data should have been flushed back in the process of taking
+ it offline.
+
+ It is also not much helpful to the situation by adding fsync calls to the
+ install code. The fsync did not force to write back dirty cache to the original
+ device and rather it would update associated cache metadata to complete the
+ write transaction with the cache device. IOW the writes to cached blocks still
+ go only to the cache device.
+
+ To write back dirty cache, as LVM cache did not support dirty cache flush per
+ block range, there'no way to do it for file. On the other hand the "cleaner"
+ policy is implemented and can be used to write back "all" dirty blocks in a
+ cache, which effectively drain all dirty cache gradually to attain and last in
+ the "clean" state, which can be useful for shrinking or decommissioning a
+ cache. The result and effect is not what we are looking for here.
+
+ In conclusion, as it seems no way to enforce file writes to the original
+ device, grub may suffer from power failure as it cannot assemble the cache
+ device and read the dirty data from it. However since the case is only
+ applicable to writeback mode which is sensitive to data lost in nature, I'd
+ still like to propose my (relatively simple) patch and treat reading dirty
+ cache as improvement.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-10 Patrick Steinhardt <ps@pks.im>
+
+ gnulib: Fix build of base64 when compiling with memory debugging
+ When building GRUB with memory management debugging enabled, then the
+ build fails because of `grub_debug_malloc()` and `grub_debug_free()`
+ being undefined in the luks2 module. The cause is that we patch
+ "base64.h" to unconditionaly include "config-util.h", which shouldn't be
+ included for modules at all. As a result, `MM_DEBUG` is defined when
+ building the module, causing it to use the debug memory allocation
+ functions. As these are not built into modules, we end up with a linker
+ error.
+
+ Fix the issue by removing the <config-util.h> include altogether. The
+ sole reason it was included was for the `_GL_ATTRIBUTE_CONST` macro,
+ which we can simply define as empty in case it's not set.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-10 Patrick Steinhardt <ps@pks.im>
+
+ build: Fix option to explicitly disable memory debugging
+ The memory management system supports a debug mode that can be enabled
+ at build time by passing "--enable-mm-debug" to the configure script.
+ Passing the option will cause us define MM_DEBUG as expected, but in
+ fact the reverse option "--disable-mm-debug" will do the exact same
+ thing and also set up the define. This currently causes the build of
+ "lib/gnulib/base64.c" to fail as it tries to use `grub_debug_malloc()`
+ and `grub_debug_free()` even though both symbols aren't defined.
+
+ Seemingly, `AC_ARG_ENABLE()` will always execute the third argument if
+ either the positive or negative option was passed. Let's thus fix the
+ issue by moving the call to`AC_DEFINE()` into an explicit `if test
+ $xenable_mm_debug` block, similar to how other defines work.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
+
+2020-03-10 David Michael <fedora.dm0@gmail.com>
+
+ fat: Support file modification times
+ This allows comparing file ages on EFI system partitions.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-10 David Michael <fedora.dm0@gmail.com>
+
+ exfat: Save the matching directory entry struct when searching
+ This provides the node's attributes outside the iterator function
+ so the file modification time can be accessed and reported.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-10 Mike Gilbert <floppym@gentoo.org>
+
+ datetime: Enable the datetime module for the emu platform
+ Fixes a build failure:
+
+ grub-core/commands/date.c:49: undefined reference to `grub_get_weekday_name'
+ grub-core/commands/ls.c:155: undefined reference to `grub_unixtime2datetime'
+
+ Bug: https://bugs.gentoo.org/711512
+
+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
+ Tested-by: Javier Martinez Canillas <javierm@redhat.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-10 John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
+
+ build: Add soft-float handling for SuperH (sh4)
+ While GRUB has no platform support for SuperH (sh4) yet, this change
+ adds the target-specific handling of soft-floats such that the GRUB
+ utilities can be built on this target.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-10 Peter Jones <pjones@redhat.com>
+
+ efi: Fix the type of grub_efi_status_t
+ Currently, in some builds with some checkers, we see:
+
+ 1. grub-core/disk/efi/efidisk.c:601: error[shiftTooManyBitsSigned]: Shifting signed 64-bit value by 63 bits is undefined behaviour
+
+ This is because grub_efi_status_t is defined as grub_efi_intn_t, which is
+ signed, and shifting into the sign bit is not defined behavior. UEFI fixed
+ this in the spec in 2.3:
+
+ 2.3 | Change the defined type of EFI_STATUS from INTN to UINTN | May 7, 2009
+
+ And the current EDK2 code has:
+ MdePkg/Include/Base.h-//
+ MdePkg/Include/Base.h-// Status codes common to all execution phases
+ MdePkg/Include/Base.h-//
+ MdePkg/Include/Base.h:typedef UINTN RETURN_STATUS;
+ MdePkg/Include/Base.h-
+ MdePkg/Include/Base.h-/**
+ MdePkg/Include/Base.h- Produces a RETURN_STATUS code with the highest bit set.
+ MdePkg/Include/Base.h-
+ MdePkg/Include/Base.h- @param StatusCode The status code value to convert into a warning code.
+ MdePkg/Include/Base.h- StatusCode must be in the range 0x00000000..0x7FFFFFFF.
+ MdePkg/Include/Base.h-
+ MdePkg/Include/Base.h- @return The value specified by StatusCode with the highest bit set.
+ MdePkg/Include/Base.h-
+ MdePkg/Include/Base.h-**/
+ MdePkg/Include/Base.h-#define ENCODE_ERROR(StatusCode) ((RETURN_STATUS)(MAX_BIT | (StatusCode)))
+ MdePkg/Include/Base.h-
+ MdePkg/Include/Base.h-/**
+ MdePkg/Include/Base.h- Produces a RETURN_STATUS code with the highest bit clear.
+ MdePkg/Include/Base.h-
+ MdePkg/Include/Base.h- @param StatusCode The status code value to convert into a warning code.
+ MdePkg/Include/Base.h- StatusCode must be in the range 0x00000000..0x7FFFFFFF.
+ MdePkg/Include/Base.h-
+ MdePkg/Include/Base.h- @return The value specified by StatusCode with the highest bit clear.
+ MdePkg/Include/Base.h-
+ MdePkg/Include/Base.h-**/
+ MdePkg/Include/Base.h-#define ENCODE_WARNING(StatusCode) ((RETURN_STATUS)(StatusCode))
+ MdePkg/Include/Base.h-
+ MdePkg/Include/Base.h-/**
+ MdePkg/Include/Base.h- Returns TRUE if a specified RETURN_STATUS code is an error code.
+ MdePkg/Include/Base.h-
+ MdePkg/Include/Base.h- This function returns TRUE if StatusCode has the high bit set. Otherwise, FALSE is returned.
+ MdePkg/Include/Base.h-
+ MdePkg/Include/Base.h- @param StatusCode The status code value to evaluate.
+ MdePkg/Include/Base.h-
+ MdePkg/Include/Base.h- @retval TRUE The high bit of StatusCode is set.
+ MdePkg/Include/Base.h- @retval FALSE The high bit of StatusCode is clear.
+ MdePkg/Include/Base.h-
+ MdePkg/Include/Base.h-**/
+ MdePkg/Include/Base.h-#define RETURN_ERROR(StatusCode) (((INTN)(RETURN_STATUS)(StatusCode)) < 0)
+ ...
+ Uefi/UefiBaseType.h:typedef RETURN_STATUS EFI_STATUS;
+
+ This patch makes grub's implementation match the Edk2 declaration with regards
+ to the signedness of the type.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-10 Peter Jones <pjones@redhat.com>
+
+ efi/gop: Add debug output on GOP probing
+ Add debug information to EFI GOP video driver probing function.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-10 Peter Jones <pjones@redhat.com>
+
+ efi/uga: Use video instead of fb as debug condition
+ All other video drivers use "video" as the debug condition instead of "fb"
+ so change this in the efi/uga driver to make it consistent with the others.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-10 Peter Jones <pjones@redhat.com>
+
+ efi: Print error messages to grub_efi_allocate_pages_real()
+ No messages were printed in this function, add some to ease debugging.
+
+ Also, the function returns a void * pointer so return NULL instead of
+ 0 to make the code more readable.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-10 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ efi/uga: Use 64 bit for fb_base
+ We get 64 bit from PCI BAR but then truncate by assigning to 32 bit.
+ Make sure to check that pointer does not overflow on 32 bit platform.
+
+ Closes: 50931
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-10 Alexander Graf <agraf@suse.de>
+
+ efi/gop: Add support for BLT_ONLY adapters
+ EFI GOP has support for multiple different bitness types of frame buffers
+ and for a special "BLT only" type which is always defined to be RGBx.
+
+ Because grub2 doesn't ever directly access the frame buffer but instead
+ only renders graphics via the BLT interface anyway, we can easily support
+ these adapters.
+
+ The reason this has come up now is the emerging support for virtio-gpu
+ in OVMF. That adapter does not have the notion of a memory mapped frame
+ buffer and thus is BLT only.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-10 Peter Jones <pjones@redhat.com>
+
+ normal/completion: Fix possible NULL pointer dereference
+ Coverity Scan reports that the grub_strrchr() function can return NULL if
+ the character is not found. Check if that's the case for dirfile pointer.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-10 Peter Jones <pjones@redhat.com>
+
+ kern: Add grub_debug_enabled()
+ Add a grub_debug_enabled() helper function instead of open coding it.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-10 Peter Jones <pjones@redhat.com>
+
+ Makefile: Make libgrub.pp depend on config-util.h
+ If you build with "make -j48" a lot, sometimes you see:
+
+ gcc -E -DHAVE_CONFIG_H -I. -I.. -Wall -W -DGRUB_UTIL=1 -D_FILE_OFFSET_BITS=64 -I./include -DGRUB_FILE=\"grub_script.tab.h\" -I. -I.. -I. -I.. -I../include -I./include -I../grub-core/lib/libgcrypt-grub/src/ -I../grub-core/lib/minilzo -I../grub-core/lib/xzembed -DMINILZO_HAVE_CONFIG_H -Wall -W -DGRUB_UTIL=1 -D_FILE_OFFSET_BITS=64 -I./include -DGRUB_FILE=\"grub_script.tab.h\" -I. -I.. -I. -I.. -I../include -I./include -I../grub-core/lib/libgcrypt-grub/src/ -I./grub-core/gnulib -I../grub-core/gnulib -I/builddir/build/BUILD/grub-2.02/grub-aarch64-efi-2.02 -D_FILE_OFFSET_BITS=64 \
+ -D'GRUB_MOD_INIT(x)=@MARKER@x@' grub_script.tab.h grub_script.yy.h ../grub-core/commands/blocklist.c ../grub-core/commands/macbless.c ../grub-core/commands/xnu_uuid.c ../grub-core/commands/testload.c ../grub-core/commands/ls.c ../grub-core/disk/dmraid_nvidia.c ../grub-core/disk/loopback.c ../grub-core/disk/lvm.c ../grub-core/disk/mdraid_linux.c ../grub-core/disk/mdraid_linux_be.c ../grub-core/disk/mdraid1x_linux.c ../grub-core/disk/raid5_recover.c ../grub-core/disk/raid6_recover.c ../grub-core/font/font.c ../grub-core/gfxmenu/font.c ../grub-core/normal/charset.c ../grub-core/video/fb/fbblit.c ../grub-core/video/fb/fbutil.c ../grub-core/video/fb/fbfill.c ../grub-core/video/fb/video_fb.c ../grub-core/video/video.c ../grub-core/video/capture.c ../grub-core/video/colors.c ../grub-core/unidata.c ../grub-core/io/bufio.c ../grub-core/fs/affs.c ../grub-core/fs/afs.c ../grub-core/fs/bfs.c ../grub-core/fs/btrfs.c ../grub-core/fs/cbfs.c ../grub-core/fs/cpio.c ../grub-core/fs/cpio_be.c ../grub-core/fs/odc.c ../grub-core/fs/newc.c ../grub-core/fs/ext2.c ../grub-core/fs/fat.c ../grub-core/fs/exfat.c ../grub-core/fs/fshelp.c ../grub-core/fs/hfs.c ../grub-core/fs/hfsplus.c ../grub-core/fs/hfspluscomp.c ../grub-core/fs/iso9660.c ../grub-core/fs/jfs.c ../grub-core/fs/minix.c ../grub-core/fs/minix2.c ../grub-core/fs/minix3.c ../grub-core/fs/minix_be.c ../grub-core/fs/minix2_be.c ../grub-core/fs/minix3_be.c ../grub-core/fs/nilfs2.c ../grub-core/fs/ntfs.c ../grub-core/fs/ntfscomp.c ../grub-core/fs/reiserfs.c ../grub-core/fs/romfs.c ../grub-core/fs/sfs.c ../grub-core/fs/squash4.c ../grub-core/fs/tar.c ../grub-core/fs/udf.c ../grub-core/fs/ufs2.c ../grub-core/fs/ufs.c ../grub-core/fs/ufs_be.c ../grub-core/fs/xfs.c ../grub-core/fs/zfs/zfscrypt.c ../grub-core/fs/zfs/zfs.c ../grub-core/fs/zfs/zfsinfo.c ../grub-core/fs/zfs/zfs_lzjb.c ../grub-core/fs/zfs/zfs_lz4.c ../grub-core/fs/zfs/zfs_sha256.c ../grub-core/fs/zfs/zfs_fletcher.c ../grub-core/lib/envblk.c ../grub-core/lib/hexdump.c ../grub-core/lib/LzFind.c ../grub-core/lib/LzmaEnc.c ../grub-core/lib/crc.c ../grub-core/lib/adler32.c ../grub-core/lib/crc64.c ../grub-core/normal/datetime.c ../grub-core/normal/misc.c ../grub-core/partmap/acorn.c ../grub-core/partmap/amiga.c ../grub-core/partmap/apple.c ../grub-core/partmap/sun.c ../grub-core/partmap/plan.c ../grub-core/partmap/dvh.c ../grub-core/partmap/sunpc.c ../grub-core/partmap/bsdlabel.c ../grub-core/partmap/dfly.c ../grub-core/script/function.c ../grub-core/script/lexer.c ../grub-core/script/main.c ../grub-core/script/script.c ../grub-core/script/argv.c ../grub-core/io/gzio.c ../grub-core/io/xzio.c ../grub-core/io/lzopio.c ../grub-core/kern/ia64/dl_helper.c ../grub-core/kern/arm/dl_helper.c ../grub-core/kern/arm64/dl_helper.c ../grub-core/lib/minilzo/minilzo.c ../grub-core/lib/xzembed/xz_dec_bcj.c ../grub-core/lib/xzembed/xz_dec_lzma2.c ../grub-core/lib/xzembed/xz_dec_stream.c ../util/misc.c ../grub-core/kern/command.c ../grub-core/kern/device.c ../grub-core/kern/disk.c ../grub-core/lib/disk.c ../util/getroot.c ../grub-core/osdep/unix/getroot.c ../grub-core/osdep/getroot.c ../grub-core/osdep/devmapper/getroot.c ../grub-core/osdep/relpath.c ../grub-core/kern/emu/hostdisk.c ../grub-core/osdep/devmapper/hostdisk.c ../grub-core/osdep/hostdisk.c ../grub-core/osdep/unix/hostdisk.c ../grub-core/osdep/exec.c ../grub-core/osdep/sleep.c ../grub-core/osdep/password.c ../grub-core/kern/emu/misc.c ../grub-core/kern/emu/mm.c ../grub-core/kern/env.c ../grub-core/kern/err.c ../grub-core/kern/file.c ../grub-core/kern/fs.c ../grub-core/kern/list.c ../grub-core/kern/misc.c ../grub-core/kern/partition.c ../grub-core/lib/crypto.c ../grub-core/disk/luks.c ../grub-core/disk/geli.c ../grub-core/disk/cryptodisk.c ../grub-core/disk/AFSplitter.c ../grub-core/lib/pbkdf2.c ../grub-core/commands/extcmd.c ../grub-core/lib/arg.c ../grub-core/disk/ldm.c ../grub-core/disk/diskfilter.c ../grub-core/partmap/gpt.c ../grub-core/partmap/msdos.c ../grub-core/fs/proc.c ../grub-core/fs/archelp.c > libgrub.pp || (rm -f libgrub.pp; exit 1)
+ rm -f stamp-h1
+ touch ../config-util.h.in
+ cd . && /bin/sh ./config.status config-util.h
+ config.status: creating config-util.h
+ In file included from ../include/grub/mm.h:25:0,
+ from ../include/grub/disk.h:29,
+ from ../include/grub/file.h:26,
+ from ../grub-core/fs/btrfs.c:21:
+ ./config.h:38:10: fatal error: ./config-util.h: No such file or directory
+ #include <config-util.h>
+ ^~~~~~~~~~~~~~~
+ compilation terminated.
+ make: *** [Makefile:13098: libgrub.pp] Error 1
+
+ This is because libgrub.pp is built with -DGRUB_UTIL=1, which means
+ it'll try to include config-util.h, but a parallel make is actually
+ building that file. I think.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-10 Peter Jones <pjones@redhat.com>
+
+ efi: Print more debug info in our module loader
+ The function that searches the mods section base address does not have
+ any debug information. Add some debugging outputs that could be useful.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-10 Peter Jones <pjones@redhat.com>
+
+ linux/getroot: Handle rssd storage device names
+ The Micron PCIe SSDs Linux driver (mtip32xx) exposes block devices
+ as /dev/rssd[a-z]+[0-9]*. Add support for these rssd device names.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-10 Julian Andres Klode <julian.klode@canonical.com>
+
+ smbios: Add a --linux argument to apply linux modalias-like filtering
+ Linux creates modalias strings by filtering out non-ASCII, space,
+ and colon characters. Provide an option that does the same filtering
+ so people can create a modalias string in GRUB, and then match their
+ modalias patterns against it.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-10 Mike Gilbert <floppym@gentoo.org>
+
+ po: Fix replacement of %m in sed programs
+ When running make dist, I hit this error:
+
+ rm -f en@arabic.gmo && /usr/bin/gmsgfmt -c --statistics --verbose -o en@arabic.gmo en@arabic.po
+ en@arabic.po:5312: 'msgstr' is not a valid C format string, unlike 'msgid'.
+ Reason: The character that terminates the directive number 3 is not a valid conversion specifier.
+ /usr/bin/gmsgfmt: found 1 fatal error
+
+ This was caused by "%m" being replaced with foreign Unicode characters.
+ For example:
+
+ msgid "cannot rename the file %s to %s: %m"
+ msgstr "ﺹﺎﻨﻧﻮﺗ ﺮﻌﻧﺎﻤﻋ ﺖﻬﻋ ﻒִﻴﻠﻋ %s ﺕﻭ %s: %ﻡ"
+
+ Mimic the workaround used for "%s" by reversing the replacement of "%m" at
+ the end of the sed programs.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-03-10 Colin Watson <cjwatson@ubuntu.com>
+
+ gettext: Restore patches to po/Makefile.in.in
+ These were inadvertently lost during the conversion to Gnulib (gnulib:
+ Upgrade Gnulib and switch to bootstrap tool; commit 35b909062). The
+ files in po/gettext-patches/ can be imported using "git am" on top of
+ the gettext tag corresponding to AM_GNU_GETTEXT_VERSION in configure.ac
+ (currently 0.18.3). They handle translation of messages in shell files,
+ make msgfmt output in little-endian format, and arrange to use @SHELL@
+ rather than /bin/sh.
+
+ There were some changes solely for the purpose of distributing extra
+ files; for ease of maintenance, I've added these to
+ conf/Makefile.extra-dist instead.
+
+ Fixes: https://savannah.gnu.org/bugs/?57298
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-02-28 Peter Jones <pjones@redhat.com>
+
+ misc: Make grub_strtol() "end" pointers have safer const qualifiers
+ Currently the string functions grub_strtol(), grub_strtoul(), and
+ grub_strtoull() don't declare the "end" pointer in such a way as to
+ require the pointer itself or the character array to be immutable to the
+ implementation, nor does the C standard do so in its similar functions,
+ though it does require us not to change any of it.
+
+ The typical declarations of these functions follow this pattern:
+
+ long
+ strtol(const char * restrict nptr, char ** restrict endptr, int base);
+
+ Much of the reason for this is historic, and a discussion of that
+ follows below, after the explanation of this change. (GRUB currently
+ does not include the "restrict" qualifiers, and we name the arguments a
+ bit differently.)
+
+ The implementation is semantically required to treat the character array
+ as immutable, but such accidental modifications aren't stopped by the
+ compiler, and the semantics for both the callers and the implementation
+ of these functions are sometimes also helped by adding that requirement.
+
+ This patch changes these declarations to follow this pattern instead:
+
+ long
+ strtol(const char * restrict nptr,
+ const char ** const restrict endptr,
+ int base);
+
+ This means that if any modification to these functions accidentally
+ introduces either an errant modification to the underlying character
+ array, or an accidental assignment to endptr rather than *endptr, the
+ compiler should generate an error. (The two uses of "restrict" in this
+ case basically mean strtol() isn't allowed to modify the character array
+ by going through *endptr, and endptr isn't allowed to point inside the
+ array.)
+
+ It also means the typical use case changes to:
+
+ char *s = ...;
+ const char *end;
+ long l;
+
+ l = strtol(s, &end, 10);
+
+ Or even:
+
+ const char *p = str;
+ while (p && *p) {
+ long l = strtol(p, &p, 10);
+ ...
+ }
+
+ This fixes 26 places where we discard our attempts at treating the data
+ safely by doing:
+
+ const char *p = str;
+ long l;
+
+ l = strtol(p, (char **)&ptr, 10);
+
+ It also adds 5 places where we do:
+
+ char *p = str;
+ while (p && *p) {
+ long l = strtol(p, (const char ** const)&p, 10);
+ ...
+ /* more calls that need p not to be pointer-to-const */
+ }
+
+ While moderately distasteful, this is a better problem to have.
+
+ With one minor exception, I have tested that all of this compiles
+ without relevant warnings or errors, and that /much/ of it behaves
+ correctly, with gcc 9 using 'gcc -W -Wall -Wextra'. The one exception
+ is the changes in grub-core/osdep/aros/hostdisk.c , which I have no idea
+ how to build.
+
+ Because the C standard defined type-qualifiers in a way that can be
+ confusing, in the past there's been a slow but fairly regular stream of
+ churn within our patches, which add and remove the const qualifier in many
+ of the users of these functions. This change should help avoid that in
+ the future, and in order to help ensure this, I've added an explanation
+ in misc.h so that when someone does get a compiler warning about a type
+ error, they have the fix at hand.
+
+ The reason we don't have "const" in these calls in the standard is
+ purely anachronistic: C78 (de facto) did not have type qualifiers in the
+ syntax, and the "const" type qualifier was added for C89 (I think; it
+ may have been later). strtol() appears to date from 4.3BSD in 1986,
+ which means it could not be added to those functions in the standard
+ without breaking compatibility, which is usually avoided.
+
+ The syntax chosen for type qualifiers is what has led to the churn
+ regarding usage of const, and is especially confusing on string
+ functions due to the lack of a string type. Quoting from C99, the
+ syntax is:
+
+ declarator:
+ pointer[opt] direct-declarator
+ direct-declarator:
+ identifier
+ ( declarator )
+ direct-declarator [ type-qualifier-list[opt] assignment-expression[opt] ]
+ ...
+ direct-declarator [ type-qualifier-list[opt] * ]
+ ...
+ pointer:
+ * type-qualifier-list[opt]
+ * type-qualifier-list[opt] pointer
+ type-qualifier-list:
+ type-qualifier
+ type-qualifier-list type-qualifier
+ ...
+ type-qualifier:
+ const
+ restrict
+ volatile
+
+ So the examples go like:
+
+ const char foo; // immutable object
+ const char *foo; // mutable pointer to object
+ char * const foo; // immutable pointer to mutable object
+ const char * const foo; // immutable pointer to immutable object
+ const char const * const foo; // XXX extra const keyword in the middle
+ const char * const * const foo; // immutable pointer to immutable
+ // pointer to immutable object
+ const char ** const foo; // immutable pointer to mutable pointer
+ // to immutable object
+
+ Making const left-associative for * and right-associative for everything
+ else may not have been the best choice ever, but here we are, and the
+ inevitable result is people using trying to use const (as they should!),
+ putting it at the wrong place, fighting with the compiler for a bit, and
+ then either removing it or typecasting something in a bad way. I won't
+ go into describing restrict, but its syntax has exactly the same issue
+ as with const.
+
+ Anyway, the last example above actually represents the *behavior* that's
+ required of strtol()-like functions, so that's our choice for the "end"
+ pointer.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-02-28 Mike Gilbert <floppym@gentoo.org>
+
+ build: Disable PIE in TARGET_CCASFLAGS if needed
+ PIE should be disabled in assembly sources as well, or else GRUB will
+ fail to boot.
+
+ Bug: https://bugs.gentoo.org/667852
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
+
+2020-02-28 Mike Gilbert <floppym@gentoo.org>
+
+ build: Move TARGET_* assignments earlier
+ On a 32-bit SPARC userland, configure fails to compile assembly and the
+ build fails:
+
+ checking for options to compile assembly... configure: error: could not compile assembly
+
+ config.log shows:
+
+ asm-tests/sparc64.S: Assembler messages:
+ asm-tests/sparc64.S:5: Error: Architecture mismatch on "lduw [%o4+4],%o4".
+ asm-tests/sparc64.S:5: (Requires v9|v9a|v9b|v9c|v9d|v9e|v9v|v9m|m8; requested architecture is sparclite.)
+ asm-tests/sparc64.S:7: Error: Architecture mismatch on "stw %o5,[%o3]".
+ asm-tests/sparc64.S:7: (Requires v9|v9a|v9b|v9c|v9d|v9e|v9v|v9m|m8; requested architecture is sparclite.)
+ asm-tests/sparc64.S:8: Error: Architecture mismatch on "bne,pt %icc,1b ,pt %icc,1b".
+ asm-tests/sparc64.S:8: (Requires v9|v9a|v9b|v9c|v9d|v9e|v9v|v9m|m8; requested architecture is sparclite.)
+
+ Simply moving these blocks earlier in configure.ac is sufficient to
+ ensure that the tests are executed with the appropriate flags
+ (specifically -m64 in this case).
+
+ Bug: https://bugs.gentoo.org/667850
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
+
+2020-02-28 Patrick Steinhardt <ps@pks.im>
+
+ luks2: Add missing newline to debug message
+ The debug message printed when decryption with a keyslot fails is
+ missing its trailing newline. Add it to avoid mangling it with
+ subsequent output.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-02-18 Michael Chang <mchang@suse.com>
+
+ verifiers: Fix calling uninitialized function pointer
+ The necessary check for NULL before use of function ver->close is not
+ taking place in the failure path. This patch simply adds the missing
+ check and fixes the problem that GRUB hangs indefinitely after booting
+ rogue image without valid signature if secure boot is turned on.
+
+ Now it displays like this for booting rogue UEFI image:
+
+ error: bad shim signature
+ error: you need to load the kernel first
+
+ Press any key to continue...
+
+ and then you can go back to boot menu by pressing any key or after a few
+ seconds expired.
+
+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-02-18 Peter Jones <pjones@redhat.com>
+
+ grub-editenv: Make grub-editenv chase symlinks including those across devices
+ The grub-editenv create command will wrongly overwrite /boot/grub2/grubenv
+ with a regular file if grubenv is a symbolic link. But instead, it should
+ create a new file in the path the symlink points to.
+
+ This lets /boot/grub2/grubenv be a symlink to /boot/efi/EFI/fedora/grubenv
+ even when they're different mount points, which allows grub2-editenv to be
+ the same across platforms (i.e. UEFI vs BIOS).
+
+ For example, in Fedora the GRUB EFI builds have prefix set to /EFI/fedora
+ (on the EFI System Partition), but for BIOS machine it'll be /boot/grub2
+ (which may or may not be its own mountpoint).
+
+ With this patch, on EFI machines we can make /boot/grub2/grubenv a symlink
+ to /boot/efi/EFI/fedora/grubenv, and the same copy of grub-set-default will
+ work on both kinds of systems.
+
+ Windows doesn't implement a readlink primitive, so the current behaviour is
+ maintained for this operating system.
+
+ Reviewed-by: Adam Jackson <ajax@redhat.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-02-18 Peter Jones <pjones@redhat.com>
+
+ grub-editenv: Add grub_util_readlink()
+ Currently grub-editenv and related tools are not able to follow symbolic
+ links when finding their config file. For example the grub-editenv create
+ command will wrongly overwrite a symlink in /boot/grub2/grubenv with a new
+ regular file, instead of creating a file in the path the symlink points to.
+
+ A following patch will change that and add support in grub-editenv to
+ follow symbolic links when finding the grub environment variables file.
+
+ Add a grub_util_readlink() helper function that is just a wrapper around
+ the platform specific function to read the value of a symbolic link. This
+ helper function will be used by the following patch for grub-editenv.
+
+ The helper function is not added for Windows, since this operating system
+ doesn't have a primitive to read the contents of a symbolic link.
+
+ Reviewed-by: Adam Jackson <ajax@redhat.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-02-18 Robert Marshall <rmarshall@redhat.com>
+
+ docs: Update info with grub.cfg netboot selection order
+ Add documentation to the GRUB manual that specifies the order netboot
+ clients use to select a GRUB configuration file.
+
+ Also explain that the feature is enabled by default but can be disabled
+ by setting the "feature_net_search_cfg" environment variable to "n" in
+ an embedded configuration file.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-02-18 Paulo Flabiano Smorigo <pfsmorigo@br.ibm.com>
+
+ normal/main: Search for specific config files for netboot
+ This patch implements a search for a specific configuration when the config
+ file is on a remoteserver. It uses the following order:
+ 1) DHCP client UUID option.
+ 2) MAC address (in lower case hexadecimal with dash separators);
+ 3) IP (in upper case hexadecimal) or IPv6;
+ 4) The original grub.cfg file.
+
+ This procedure is similar to what is used by pxelinux and yaboot:
+ http://www.syslinux.org/wiki/index.php/PXELINUX#config
+
+ It is enabled by default but can be disabled by setting the environment
+ variable "feature_net_search_cfg" to "n" in an embedded configuration.
+
+ Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=873406
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-02-18 Paulo Flabiano Smorigo <pfsmorigo@br.ibm.com>
+
+ net/dhcp: Set net_<interface>_client{id, uuid} variables from DHCP options
+ This patch sets a net_<interface>_clientid and net_<interface>_clientuuid
+ GRUB environment variables, using the DHCP client ID and UUID options if
+ these are found.
+
+ In the same way than net_<interface>_<option> variables are set for other
+ options such domain name, boot file, next server, etc.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-02-18 Javier Martinez Canillas <javierm@redhat.com>
+
+ net/dhcp: Consistently use decimal numbers for DHCP/BOOTP options enum
+ The DHCP Options and BOOTP Vendor Extensions enum values are a mixture of
+ decimal and hexadecimal numbers. Change this to consistently use decimal
+ numbers for all since that is how these values are defined by RFC 2132.
+
+ Suggested-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-02-18 Paulo Flabiano Smorigo <pfsmorigo@br.ibm.com>
+
+ kern: Add %X option to printf functions
+ The printf(3) function has support for the %X format specifier, to output
+ an unsigned hexadecimal integer in uppercase.
+
+ This can be achived in GRUB using the %x format specifier in grub_printf()
+ and calling grub_toupper(), but it is more convenient if there is support
+ for %X in grub_printf().
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-02-18 Javier Martinez Canillas <javierm@redhat.com>
+
+ normal: Move common datetime functions out of the normal module
+ The common datetime helper functions are currently included in the normal
+ module, but this makes any other module that calls these functions to have
+ a dependency with the normal module only for this reason.
+
+ Since the normal module does a lot of stuff, it calls functions from other
+ modules. But since other modules may depend on it for calling the datetime
+ helpers, this could lead to circular dependencies between modules.
+
+ As an example, when platform == xen the grub_get_datetime() function from
+ the datetime module calls to the grub_unixtime2datetime() helper function
+ from the normal module. Which leads to the following module dependency:
+
+ datetime -> normal
+
+ and send_dhcp_packet() from the net module calls the grub_get_datetime()
+ function, which leads to the following module dependency:
+
+ net -> datetime -> normal
+
+ but that means that the normal module is not allowed to depend on net or
+ any other module that depends on it due the transitive dependency caused
+ by datetime. A recent patch attempted to add support to fetch the config
+ file over the network, which leads to the following circular dependency:
+
+ normal -> net -> datetime -> normal
+
+ So having the datetime helpers in the normal module makes it quite fragile
+ and easy to add circular dependencies like these, that break the build due
+ the genmoddep.awk script catching the issues.
+
+ Fix this by taking the datetime helper functions out of the normal module
+ and instead add them to the datetime module itself. Besides fixing these
+ issues, it makes more sense to have these helper functions there anyways.
+
+ Reported-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-02-11 Peter Jones <pjones@redhat.com>
+
+ minilzo: Update to minilzo-2.08
+ This patch updates the miniLZO library to a newer version, which among other
+ things fixes "CVE-2014-4607 - lzo: lzo1x_decompress_safe() integer overflow"
+ that is present in the current used in GRUB.
+
+ It also updates the "GRUB Developers Manual", to mention that the library is
+ used and describes the process to update it to a newer release when needed.
+
+ Resolves: http://savannah.gnu.org/bugs/?42635
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-01-28 Peter Jones <pjones@redhat.com>
+
+ squash4: Fix an uninitialized variable
+ gcc says:
+
+ grub-core/fs/squash4.c: In function ‘direct_read’:
+ grub-core/fs/squash4.c:868:10: error: ‘err’ may be used uninitialized in
+ this function [-Werror=maybe-uninitialized]
+ 868 | if (err)
+ | ^
+ cc1: all warnings being treated as errors
+
+ This patch initializes it to GRUB_ERR_NONE.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-01-28 C. Masloch <pushbx@ulukai.org>
+
+ freedos: Fix FreeDOS command booting large files (near or above 64 KiB)
+ While testing the 86-DOS lDebug [1] booting from GRUB2, newer versions of the
+ debugger would fail to load when booted using GRUB's freedos command. The
+ behaviour observed in a qemu i386 machine was that the ROM-BIOS's boot load
+ would start anew, instead of loading the selected debugger as kernel.
+
+ It came to light that there was a size limit: Kernel files that were 58880
+ bytes (E600h) long or shorter succeeded to boot, while files that were 64000
+ bytes or longer failed in the manner described.
+
+ Eventually it turned out that the relocator16 stub succeeded whenever it was
+ placed completely within the first 64 KiB of the Low Memory Area. The chunk
+ for the relocator is allocated with a minimum address of 0x8010 and a maximum
+ address just below 0xA0000 [2]. That means if the kernel is, for instance,
+ E600h bytes long, then the kernel will be allocated memory starting at 00600h
+ (the fixed FreeDOS kernel load address) up to E600h + 00600h = 0EC00h, which
+ leaves 1400h (5120) bytes for the relocator to stay in the first 64 KiB.
+ If the kernel is 64000 bytes (FA00h) long, then the relocator must go to
+ FA00h + 00600h = 10000h at least which is outside the first 64 KiB.
+
+ The problem is that the relocator16 initialises the DS register with a
+ "pseudo real mode" descriptor, which is defined with a segment limit of
+ 64 KiB and a segment base of zero. After that, the relocator addressed
+ parts of itself (implicitly) using the DS register, with an offset from
+ ESI, which holds the linear address of the relocator's base [3]. With the
+ larger kernel files this would lead to accessing data beyond the 64 KiB
+ segment limit, presumably leading to a fault and perhaps a subsequent
+ triple-fault or such.
+
+ This patch fixes the relocator to set the segment base of the descriptors
+ to the base address of the relocator; then, the subsequent accesses to
+ the relocator's variables are done without the ESI register as an index.
+ This does not interfere with the relocator's or its target's normal
+ operation; the segment limits are still loaded with 64 KiB and all the
+ segment bases are subsequently reset by the relocator anyway.
+
+ Current versions of the debugger to test are uploaded to [4]. The file
+ ldebugnh.com (LZ4-compressed and built with -D_EXTHELP=0) at 58368 bytes
+ loads successfully, whereas ldebug.com at 64000 bytes fails. Loading one
+ of these files requires setting root to a FAT FS partition and using the
+ freedos command to specify the file as kernel:
+
+ set root='(hd0,msdos1)'
+ freedos /ldebug.com
+ boot
+
+ Booting the file using the multiboot command (which uses a WIP entrypoint
+ of the debugger) works, as it does not use GRUB's relocator16 but instead
+ includes a loader in the kernel itself, which drops it back to 86 Mode.
+
+ [1]: https://hg.ulukai.org/ecm/ldebug
+ [2]: http://git.savannah.gnu.org/cgit/grub.git/tree/grub-core/lib/i386/relocator.c?id=495781f5ed1b48bf27f16c53940d6700c181c74c#n127
+ [3]: http://git.savannah.gnu.org/cgit/grub.git/tree/grub-core/lib/i386/relocator16.S?id=495781f5ed1b48bf27f16c53940d6700c181c74c#n97
+ [4]: https://ulukai.org/ecm/lDebug-5479a7988d21-nohelp.zip
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-01-10 Patrick Steinhardt <ps@pks.im>
+
+ disk: Implement support for LUKS2
+ With cryptsetup 2.0, a new version of LUKS was introduced that breaks
+ compatibility with the previous version due to various reasons. GRUB
+ currently lacks any support for LUKS2, making it impossible to decrypt
+ disks encrypted with that version. This commit implements support for
+ this new format.
+
+ Note that LUKS1 and LUKS2 are quite different data formats. While they
+ do share the same disk signature in the first few bytes, representation
+ of encryption parameters is completely different between both versions.
+ While the former version one relied on a single binary header, only,
+ LUKS2 uses the binary header only in order to locate the actual metadata
+ which is encoded in JSON. Furthermore, the new data format is a lot more
+ complex to allow for more flexible setups, like e.g. having multiple
+ encrypted segments and other features that weren't previously possible.
+ Because of this, it was decided that it doesn't make sense to keep both
+ LUKS1 and LUKS2 support in the same module and instead to implement it
+ in two different modules luks and luks2.
+
+ The proposed support for LUKS2 is able to make use of the metadata to
+ decrypt such disks. Note though that in the current version, only the
+ PBKDF2 key derival function is supported. This can mostly attributed to
+ the fact that the libgcrypt library currently has no support for either
+ Argon2i or Argon2id, which are the remaining KDFs supported by LUKS2. It
+ wouldn't have been much of a problem to bundle those algorithms with
+ GRUB itself, but it was decided against that in order to keep down the
+ number of patches required for initial LUKS2 support. Adding it in the
+ future would be trivial, given that the code structure is already in
+ place.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-01-10 Patrick Steinhardt <ps@pks.im>
+
+ luks: Move configuration of ciphers into cryptodisk
+ The luks module contains quite a lot of logic to parse cipher and
+ cipher-mode strings like aes-xts-plain64 into constants to apply them
+ to the grub_cryptodisk_t structure. This code will be required by the
+ upcoming luks2 module, as well, which is why this commit moves it into
+ its own function grub_cryptodisk_setcipher in the cryptodisk module.
+ While the strings are probably rather specific to the LUKS modules, it
+ certainly does make sense that the cryptodisk module houses code to set
+ up its own internal ciphers instead of hosting that code in the luks
+ module.
+
+ Except for necessary adjustments around error handling, this commit does
+ an exact move of the cipher configuration logic from luks.c to
+ cryptodisk.c. Any behavior changes are unintentional.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-01-10 Patrick Steinhardt <ps@pks.im>
+
+ afsplitter: Move into its own module
+ While the AFSplitter code is currently used only by the luks module,
+ upcoming support for luks2 will add a second module that depends on it.
+ To avoid any linker errors when adding the code to both modules because
+ of duplicated symbols, this commit moves it into its own standalone
+ module afsplitter as a preparatory step.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-01-10 Patrick Steinhardt <ps@pks.im>
+
+ bootstrap: Add gnulib's base64 module
+ The upcoming support for LUKS2 disc encryption requires us to include a
+ parser for base64-encoded data, as it is used to represent salts and
+ digests. As gnulib already has code to decode such data, we can just
+ add it to the boostrapping configuration in order to make it available
+ in GRUB.
+
+ The gnulib module makes use of booleans via the <stdbool.h> header. As
+ GRUB does not provide any POSIX wrapper header for this, but instead
+ implements support for bool in <sys/types.h>, we need to patch
+ base64.h to not use <stdbool.h> anymore. We unfortunately cannot include
+ <sys/types.h> instead, as it would then use gnulib's internal header
+ while compiling the gnulib object but our own <sys/types.h> when
+ including it in a GRUB module. Because of this, the patch replaces the
+ include with a direct typedef.
+
+ A second fix is required to make available _GL_ATTRIBUTE_CONST, which
+ is provided by the configure script. As base64.h does not include
+ <config.h>, it is thus not available and results in a compile error.
+ This is fixed by adding an include of <config-util.h>.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-01-10 Patrick Steinhardt <ps@pks.im>
+
+ json: Implement wrapping interface
+ While the newly added jsmn library provides the parsing interface, it
+ does not provide any kind of interface to act on parsed tokens. Instead,
+ the caller is expected to handle pointer arithmetics inside of the token
+ array in order to extract required information. While simple, this
+ requires users to know some of the inner workings of the library and is
+ thus quite an unintuitive interface.
+
+ This commit adds a new interface on top of the jsmn parser that provides
+ convenience functions to retrieve values from the parsed json type, grub_json_t.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2020-01-10 Patrick Steinhardt <ps@pks.im>
+
+ json: Import upstream jsmn-1.1.0
+ The upcoming support for LUKS2 encryption will require a JSON parser to
+ decode all parameters required for decryption of a drive. As there is
+ currently no other tool that requires JSON, and as gnulib does not
+ provide a parser, we need to introduce a new one into the code base. The
+ backend for the JSON implementation is going to be the jsmn library [1].
+ It has several benefits that make it a very good fit for inclusion in
+ GRUB:
+
+ - It is licensed under MIT.
+ - It is written in C89.
+ - It has no dependencies, not even libc.
+ - It is small with only about 500 lines of code.
+ - It doesn't do any dynamic memory allocation.
+ - It is testen on x86, amd64, ARM and AVR.
+
+ The library itself comes as a single header, only, that contains both
+ declarations and definitions. The exposed interface is kind of
+ simplistic, though, and does not provide any convenience features
+ whatsoever. Thus there will be a separate interface provided by GRUB
+ around this parser that is going to be implemented in the following
+ commit. This change only imports jsmn.h from tag v1.1.0 and adds it
+ unmodified to a new json module with the following command:
+
+ curl -L https://raw.githubusercontent.com/zserge/jsmn/v1.1.0/jsmn.h \
+ -o grub-core/lib/json/jsmn.h
+
+ Upstream jsmn commit hash: fdcef3ebf886fa210d14956d3c068a653e76a24e
+ Upstream jsmn commit name: Modernize (#149), 2019-04-20
+
+ [1]: https://github.com/zserge/jsmn
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-12-20 Lukasz Hawrylko <lukasz.hawrylko@linux.intel.com>
+
+ multiboot2: Set min address for mbi allocation to 0x1000
+ In some cases GRUB2 allocates multiboot2 structure at 0 address, that is
+ a confusing behavior. Consumers of that structure can have internal NULL-checks
+ that will throw an error when get a pointer to data allocated at address 0.
+ To prevent that, define min address for mbi allocation on x86 and x86_64
+ platforms.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-12-20 Paul Menzel <pmenzel@molgen.mpg.de>
+
+ docs: Export "superusers" variable to apply to submenus
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-12-20 Daniel Kiper <daniel.kiper@oracle.com>
+
+ loader/i386/linux: Fix an underflow in the setup_header length calculation
+ Recent work around x86 Linux kernel loader revealed an underflow in the
+ setup_header length calculation and another related issue. Both lead to
+ the memory overwrite and later machine crash.
+
+ Currently when the GRUB copies the setup_header into the linux_params
+ (struct boot_params, traditionally known as "zero page") it assumes the
+ setup_header size as sizeof(linux_i386_kernel_header/lh). This is
+ incorrect. It should use the value calculated accordingly to the Linux
+ kernel boot protocol. Otherwise in case of pretty old kernel, to be
+ exact Linux kernel boot protocol, the GRUB may write more into
+ linux_params than it was expected to. Fortunately this is not very big
+ issue. Though it has to be fixed. However, there is also an underflow
+ which is grave. It happens when
+
+ sizeof(linux_i386_kernel_header/lh) > "real size of the setup_header".
+
+ Then len value wraps around and grub_file_read() reads whole kernel into
+ the linux_params overwriting memory past it. This leads to the GRUB
+ memory allocator breakage and finally to its crash during boot.
+
+ The patch fixes both issues. Additionally, it moves the code not related to
+ grub_memset(linux_params)/grub_memcpy(linux_params)/grub_file_read(linux_params)
+ section outside of it to not confuse the reader.
+
+ Fixes: e683cfb0cf5 (loader/i386/linux: Calculate the setup_header length)
+
+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
+ Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
+ Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
+
+2019-12-06 David Sterba <dave@jikos.cz>
+
+ btrfs: Add support for new RAID1C34 profiles
+ New 3- and 4-copy variants of RAID1 were merged into Linux kernel 5.5.
+ Add the two new profiles to the list of recognized ones. As this builds
+ on the same code as RAID1, only the redundancy level needs to be
+ adjusted, the rest is done by the existing code.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-12-06 Lenny Szubowicz <lszubowi@redhat.com>
+
+ tftp: Normalize slashes in TFTP paths
+ Some TFTP servers do not handle multiple consecutive slashes correctly.
+ This patch avoids sending TFTP requests with non-normalized paths.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-11-18 Michael Chang <MChang@suse.com>
+
+ grub-editenv: Warn a user against editing environment block
+ The environment block is a preallocated 1024-byte file which serves as
+ persistent storage for environment variables. It has its own format
+ which is sensitive to corruption if an editor does not know how to
+ process it. Besides that the editor may inadvertently change grubenv
+ file size and/or make it sparse which can lead to unexpected results.
+
+ This patch adds a message to the grubenv file to warn a user against
+ editing it by tools other than grub-editenv.
+
+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-11-18 Michael Chang <MChang@suse.com>
+
+ hostdisk: Set linux file descriptor to O_CLOEXEC as default
+ We are often bothered by this sort of lvm warning while running grub-install
+ every now and then:
+
+ File descriptor 4 (/dev/vda1) leaked on vgs invocation. Parent PID 1991: /usr/sbin/grub2-install
+
+ The requirement related to the warning is dictated in the lvm man page:
+
+ "On invocation, lvm requires that only the standard file descriptors stdin,
+ stdout and stderr are available. If others are found, they get closed and
+ messages are issued warning about the leak. This warning can be suppressed by
+ setting the environment variable LVM_SUPPRESS_FD_WARNINGS."
+
+ While it could be disabled through settings, most Linux distributions seem to
+ enable it by default and the justification provided by the developer looks to
+ be valid to me: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=466138#15
+
+ Rather than trying to close and reopen the file descriptor to the same file
+ multiple times, which is rather cumbersome, for the sake of no vgs invocation
+ could happen in between. This patch enables the close-on-exec flag (O_CLOEXEC)
+ for new file descriptor returned by the open() system call, making it closed
+ thus not inherited by the child process forked and executed by the exec()
+ family of functions.
+
+ Fixes Debian bug #466138.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-10-28 Eli Schwartz <eschwartz@archlinux.org>
+
+ grub-mkconfig: Use portable "command -v" to detect installed programs
+ The "which" utility is not guaranteed to be installed either, and if it
+ is, its behavior is not portable either.
+
+ Conversely, the "command -v" shell builtin is required to exist in all
+ POSIX 2008 compliant shells, and is thus guaranteed to work everywhere.
+
+ Examples of open-source shells likely to be installed as /bin/sh on
+ Linux, which implement the 11-year-old standard: ash, bash, busybox,
+ dash, ksh, mksh and zsh.
+
+ A side benefit of using the POSIX portable option is that it requires
+ neither an external disk executable, nor (because unlike "which", the
+ exit code is reliable) a subshell fork. This therefore represents a mild
+ speedup.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-10-28 Peter Jones <pjones@redhat.com>
+
+ templates: Add GRUB_DISABLE_UUID
+ The grub-mkconfig and 10_linux scripts by default attempt to use a UUID to
+ set the root kernel command line parameter and the $root GRUB environment
+ variable.
+
+ The former can be disabled by setting the GRUB_DISABLE_LINUX_UUID variable
+ to "true", but there is currently no way to disable the latter.
+
+ The generated grub config uses the search command with the --fs-uuid option
+ to find the device that has to be set as $root, i.e:
+
+ search --no-floppy --fs-uuid --set=root ...
+
+ This is usually more reliable but in some cases it may not be appropriate,
+ so this patch introduces a new GRUB_DISABLE_UUID variable that can be used
+ to disable searching for the $root device by filesystem UUID.
+
+ When disabled, the $root device will be set to the value specified in the
+ device.map as found by the grub-probe --target=compatibility_hint option.
+
+ When setting GRUB_DISABLE_UUID=true, the GRUB_DISABLE_LINUX_UUID and
+ GRUB_DISABLE_LINUX_PARTUUID variables will also be set to "true" unless
+ these have been explicitly set to "false".
+
+ That way, the GRUB_DISABLE_UUID variable can be used to force using the
+ device names for both GRUB and Linux.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Reviewed-by: Nicholas Vinson <nvinson234@gmail.com>
+
+2019-10-21 Michael Bideau <mica.devel@gmail.com>
+
+ at_keyboard: Fix unreliable key presses
+ This patch fixes an issue that prevented the at_keyboard module to work
+ (for me). The cause was a bad/wrong return value in the
+ grub_at_keyboard_getkey() function in grub-core/term/at_keyboard.c file
+ at line 237. My symptoms were to have an unresponsive keyboard. Keys
+ needed to be pressed 10x and more to effectively be printed sometimes
+ generating multiple key presses (after 1 or 2 sec of no printing). It
+ was very problematic when typing passphrase in early stage (with
+ GRUB_ENABLE_CRYPTODISK). When switched to "console" terminal input
+ keyboard worked perfectly. It also worked great with the GRUB 2.02
+ packaged by Debian (2.02+dfsg1-20). It was not an output issue but an
+ input one.
+
+ I've managed to analyze the issue and found that it came from the commit
+ 216950a4e (at_keyboard: Split protocol from controller code.). Three
+ lines where moved from the fetch_key() function in
+ grub-core/term/at_keyboard.c file to the beginning of
+ grub_at_keyboard_getkey() function (same file). However, returning -1
+ made sense when it happened in fetch_key() function but not anymore in
+ grub_at_keyboard_getkey() function which should return GRUB_TERM_NO_KEY.
+ I think it was just an incomplete cut-paste missing a small manual
+ correction. Let's fix it.
+
+ Note: Commit message updated by Daniel Kiper.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-10-21 Prarit Bhargava <prarit@redhat.com>
+
+ templates: Fix bad test on GRUB_DISABLE_SUBMENU
+ The GRUB_DISABLE_SUBMENU option is different than the others in the sense
+ that it has to be set to "y" instead of "true" to be enabled.
+
+ That causes a lot of confusion to users, some may wrongly set it to "true"
+ expecting that will work the same than with most options, and some may set
+ it to "yes" since for other options the value to set is a word and not a
+ single character.
+
+ This patch changes all the grub.d scripts using the GRUB_DISABLE_SUBMENU
+ option, so they check if it was set to "true" instead of "y", making it
+ consistent with all the other options.
+
+ But to keep backward compatibility for users that set the option to "y" in
+ /etc/default/grub file, keep testing for this value. And also do it for
+ "yes", since it is a common mistake made by users caused by this option
+ being inconsistent with the others.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-10-21 Nicholas Vinson <nvinson234@gmail.com>
+
+ probe: Support probing for msdos PARTUUID
+ Extend partition UUID probing support in GRUB core to display pseudo
+ partition UUIDs for MBR (MSDOS) partitions.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-09-23 Colin Watson <cjwatson@ubuntu.com>
+
+ grub-mkconfig: Fix typo in --help output
+ The short form of "--version" that grub-mkconfig accepts is "-V", not "-v".
+
+ Fixes Debian bug #935504.
+
+ Reviewed-by: Vladimir 'phcoder' Serbinenko <phcoder@gmail.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-09-23 Andreas Schwab <schwab@suse.de>
+
+ grub-install: Define default platform for RISC-V
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Reviewed-by: Alexander Graf <agraf@csgraf.de>
+
+2019-09-23 Andreas Schwab <schwab@suse.de>
+
+ RISC-V: Add __clzdi2 symbol
+ This is needed for the zstd module build for riscv64-emu.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-09-23 Peter Jones <pjones@redhat.com>
+
+ gitattributes: Mark po/exclude.pot as binary so git won't try to diff nonprintables
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-09-23 Marcel Kolaja <mkolaja@redhat.com>
+
+ grub-mkconfig: Honor a symlink when generating configuration by grub-mkconfig
+ Honor a symlink when generating configuration by grub-mkconfig, so that
+ the -o option follows it rather than overwriting it with a regular file.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-09-23 Gustavo Luiz Duarte <gustavold@linux.vnet.ibm.com>
+
+ net: Fix crash on http
+ Don't free file->data on receiving FIN flag since it is used all over
+ without checking. http_close() will be called later to free that memory.
+
+ Fixes bug: https://bugzilla.redhat.com/show_bug.cgi?id=860834
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-09-23 Andre Przywara <andre.przywara@arm.com>
+
+ docs: Document newly introduced net_dhcp command
+ Commit 5bc41db756c5 ("net/dhcp: Add explicit net_dhcp command")
+ introduced the new command "net_dhcp", which (for now) is an alias for
+ the existing "net_bootp". Unfortunately the TEXI documentation was not
+ adjusted accordingly.
+
+ Rename the existing paragraph about net_bootp to read net_dhcp instead,
+ and make the net_bootp stanza point to this new command.
+
+ On the way add the newly parsed TFTP_SERVER_NAME and BOOTFILE_NAME
+ packets to the list of supported DHCP options.
+
+ Fixes bug: https://savannah.gnu.org/bugs/?56725
+
+ Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-07-18 James Clarke <jrtc27@jrtc27.com>
+
+ [PATCH] sparc64: Fix BIOS Boot Partition support
+ Currently, gpt_offset is uninitialised when using a BIOS Boot Partition
+ but is used unconditionally inside save_blocklists. Instead, ensure it
+ is always initialised to 0 (note that there is already separate code to
+ do the equivalent adjustment after we call save_blocklists on this code
+ path).
+
+ This patch has been tested on a T5-2 LDOM.
+
+ Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
+ Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
+ Reviewed-by: Eric Snowberg <eric.snowberg@oracle.com>
+
+ ---
+ util/setup.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+2019-07-11 Vladimir Serbinenko <phcoder@gmail.com>
+
+ configure: Add -fno-ident when available
+ MinGW for i386-pc without this option generates a .rdata$zzz symbol that is
+ page-aligned and hence lzma_decompress no longer fits in its allocated space.
+ Additionally, MinGW with -fno-ident also saves a bit of space in modules. In
+ case of other compilers we already strip the relevant sections, so, this
+ option has no effect.
+
+ More info can be found at https://github.com/msys2/MINGW-packages/issues/21
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-07-11 Heinrich Schuchardt <xypron.glpk@gmx.de>
+
+ lsefisystab: Add support for device tree table
+ The device tree may passed by the firmware as UEFI configuration
+ table. Let lsefisystab display a short text and not only the GUID
+ for the device tree.
+
+ Here is an example output:
+
+ grub> lsefisystab
+ Address: 0xbff694d8
+ Signature: 5453595320494249 revision: 00020046
+ Vendor: Das U-Boot, Version=20190700
+ 2 tables:
+ 0xbe741000 eb9d2d31-2d88-11d3-9a160090273fc14d SMBIOS
+ 0x87f00000 b1b621d5-f19c-41a5-830bd9152c69aae0 DEVICE TREE
+
+ Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-07-11 David Michael <fedora.dm0@gmail.com>
+
+ smbios: Add a module for retrieving SMBIOS information
+ The following are two use cases from Rajat Jain <rajatjain@juniper.net>:
+
+ 1) We have a board that boots Linux and this board itself can be plugged
+ into one of different chassis types. We need to pass different
+ parameters to the kernel based on the "CHASSIS_TYPE" information
+ that is passed by the bios in the DMI/SMBIOS tables.
+
+ 2) We may have a USB stick that can go into multiple boards, and the
+ exact kernel to be loaded depends on the machine information
+ (PRODUCT_NAME etc) passed via the DMI.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-07-11 David Michael <fedora.dm0@gmail.com>
+
+ lsefisystab: Define SMBIOS3 entry point structures for EFI
+ This adds the GUID and includes it in lsefisystab output.
+
+ Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-07-11 David Michael <fedora.dm0@gmail.com>
+
+ verifiers: Blocklist fallout cleanup
+ Blocklist fallout cleanup after commit 5c6f9bc15 (generic/blocklist: Fix
+ implicit declaration of function grub_file_filter_disable_compression()).
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-07-11 Andreas Schwab <schwab@suse.de>
+
+ RISC-V: Fix computation of pc-relative relocation offset
+ The offset calculation was missing the relocation addend.
+
+ Tested-by: Chester Lin <clin@suse.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-07-11 Leif Lindholm <leif.lindholm@linaro.org>
+
+ configure: Disable arm movw/movt relocations for GCC
+ When building for arm, we already disable movw/movt relocations for clang,
+ since they are incompatible with PE.
+
+ When building with bare metal GCC toolchains (like the one used in the
+ travis ci scripts), we end up with these relocations again. So add an
+ additional test for the '-mword-relocations' flag used by GCC.
+
+ Reported-by: Alexander Graf <agraf@csgraf.de>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-07-11 Jacob Kroon <jacob.kroon@gmail.com>
+
+ probe: Support probing for partition UUID with --part-uuid
+ Linux supports root=PARTUUID=<partuuid> boot argument, so add
+ support for probing it. Compared to the fs UUID, the partition
+ UUID does not change when reformatting a partition.
+
+ For now, only disks using a GPT partition table are supported.
+
+ Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-07-05 Daniel Kiper <daniel.kiper@oracle.com>
+
+ Bump version to 2.05
+
+2019-07-04 Daniel Kiper <daniel.kiper@oracle.com>
+
+ Release 2.04
+
+2019-06-24 Thomas Schmitt <scdbackup@gmx.net>
+
+ docs: Document workaround for grub-mkrescue with older MacBooks
+ Add a description of the workaround for firmware of older MacBooks
+ which stalls with a grub-mkrescue ISO image for x86_64-efi target
+ on an USB stick.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-06-24 Eric Snowberg <eric.snowberg@oracle.com>
+
+ docs: Bootstrap changes required for older distros
+ Some older distros do not contain gettext 0.18. Document the workaround
+ to use the bootstrap utility on these systems.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-06-07 Leif Lindholm <leif.lindholm@linaro.org>
+
+ ia64: build fix in cache.h
+ Add IA64 to the architectures excluding a declaration for
+ grub_arch_sync_dma_caches().
+
+ IA64 does not include any of the source files that require the function,
+ but was overlooked for d8901e3ba115 ("cache: Fix compilation for ppc,
+ sparc and arm64").
+
+ Add it to the list of excluding architectures in order to not get
+ missing symbol errors when running grub-mkimage.
+
+ Reported-by: Alexander Graf <agraf@csgraf.de>
+ Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-06-07 Vladimir 'phcoder' Serbinenko <phcoder@gmail.com>
+
+ hostfs: #undef open and close.
+ Unlike in case of disks in this case it's just a single place, so it's easier
+ to just #undef
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-06-03 John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
+
+ f2fs: Disable gcc9 -Waddress-of-packed-member
+ Disable the -Wadress-of-packaed-member diagnostic for the grub_f2fs_label
+ function since the result is found to be false postive.
+
+ A pointer to the 'volume_name' member of 'struct grub_f2fs_superblock' is
+ guaranteed to be aligned as the offset of 'volume_name' within the struct
+ is dividable by the natural alignment on both 32- and 64-bit targets.
+
+ grub-core/fs/f2fs.c: In function ‘grub_f2fs_label’:
+ grub-core/fs/f2fs.c:1253:60: error: taking address of packed member of ‘struct grub_f2fs_superblock’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
+ 1253 | *label = (char *) grub_f2fs_utf16_to_utf8 (data->sblock.volume_name);
+ | ~~~~~~~~~~~~^~~~~~~~~~~~
+ cc1: all warnings being treated as errors
+
+ Reported-by: Neil MacLeod <neil@nmacleod.com>
+ Tested-by: Neil MacLeod <neil@nmacleod.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-05-20 Vincent Legoll <vincent.legoll@gmail.com>
+
+ grub-mkrescue: Fix error message about the wrong command having failed: mformat instead of mcopy
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-05-20 Mathieu Trudel-Lapierre <mathieu.tl@gmail.com>
+
+ video: skip 'text' gfxpayload if not supported, to fallback to default
+ On UEFI, 'text' gfxpayload is not supported, but we still reach parse_modespec()
+ with it, which will obviously fail. Fortunately, whatever gfxpayload is set,
+ we still still have the 'auto' default to fall back to. Allow getting to this
+ fallback by not trying to parse 'text' as a modespec.
+
+ This is because 'text' correctly doesn't parse as a modespec, and ought to have
+ been ignored before we got to that point, just like it is immediately picked if
+ we're running on a system where 'text' is a supported video mode.
+
+ Bug: https://savannah.gnu.org/bugs/index.php?56217
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-05-20 Ovidiu Panait <ovidiu.panait@windriver.com>
+
+ grub-mkconfig: Use -c instead of --printf for stat
+ "--printf" only works with the stat variant provided by coreutils.
+
+ With busybox, stat will fail with the following error:
+ stat: unrecognized option '--printf=%T'
+
+ Usage: stat [OPTIONS] FILE...
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-05-20 Michael Chang <mchang@suse.com>
+
+ f2fs: Fix gcc9 error -Werror=maybe-uninitialized
+ The function grub_get_node_path() could return uninitialized offset with
+ level == 0 if the block is greater than direct_index + 2 * direct_blks +
+ 2 * indirect_blks + dindirect_blks. The uninitialized offset is then used
+ by function grub_f2fs_get_block() because level == 0 is valid and
+ meaningful return to be processed.
+
+ The fix is to set level = -1 as return value by grub_get_node_path() to
+ signify an error that the input block cannot be handled. Any caller
+ should therefore check level is negative or not before processing the
+ output.
+
+ Reported-by: Neil MacLeod <neil@nmacleod.com>
+ Tested-by: Neil MacLeod <neil@nmacleod.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-05-06 Alexander Graf <agraf@csgraf.de>
+
+ arm: Align section alignment with manual relocation offset code
+ The arm relocation code has a manual special case for EFI binaries to
+ add the natural alignment to its own relocation awareness.
+
+ Since commit a51f953f4ee87 ("mkimage: Align efi sections on 4k
+ boundary") we changed that alignment from 0x400 to 0x1000 bytes. Reflect
+ the change in that branch that we forgot as well.
+
+ This fixes running 32bit arm grub efi binaries for me again.
+
+ Fixes: a51f953f4ee87 ("mkimage: Align efi sections on 4k boundary")
+ Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
+ Reported-by: Steve McIntyre <steve@einval.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: Julien ROBIN <julien.robin28@free.fr>
+ Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
+ Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-05-06 Alexander Graf <agraf@csgraf.de>
+
+ arm: Move trampolines into code section
+ When creating T32->A32 transition jumps, the relocation code in grub
+ will generate trampolines. These trampolines live in the .data section
+ of our PE binary which means they are not marked as executable.
+
+ This misbehavior was unmasked by commit a51f953f4ee87 ("mkimage: Align
+ efi sections on 4k boundary") which made the X/NX boundary more obvious
+ because everything became page aligned.
+
+ To put things into proper order, let's move the arm trampolines into the
+ .text section instead. That way everyone knows they are executable.
+
+ Fixes: a51f953f4ee87 ("mkimage: Align efi sections on 4k boundary")
+ Reported-by: Julien ROBIN <julien.robin28@free.fr>
+ Reported-by: Leif Lindholm <leif.lindholm@linaro.org>
+ Tested-by: Julien ROBIN <julien.robin28@free.fr>
+ Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
+ Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-04-23 Michael Chang <mchang@suse.com>
+
+ efi: Fix gcc9 error -Waddress-of-packed-member
+ The address of fp->path_name could be unaligned since seeking into the
+ device path buffer for a given node could end in byte boundary.
+
+ The fix is allocating aligned buffer by grub_malloc for holding the
+ UTF16 string copied from fp->path_name, and after using that buffer as
+ argument for grub_utf16_to_utf8 to convert it to UTF8 string.
+
+ [ 255s] ../../grub-core/kern/efi/efi.c: In function 'grub_efi_get_filename':
+ [ 255s] ../../grub-core/kern/efi/efi.c:410:60: error: taking address of packed member of 'struct grub_efi_file_path_device_path' may result in an unaligned pointer value [-Werror=address-of-packed-member]
+ [ 255s] 410 | p = (char *) grub_utf16_to_utf8 ((unsigned char *) p, fp->path_name, len);
+ [ 255s] | ~~^~~~~~~~~~~
+ [ 255s] ../../grub-core/kern/efi/efi.c: In function 'grub_efi_print_device_path':
+ [ 255s] ../../grub-core/kern/efi/efi.c:900:33: error: taking address of packed member of 'struct grub_efi_file_path_device_path' may result in an unaligned pointer value [-Werror=address-of-packed-member]
+ [ 255s] 900 | *grub_utf16_to_utf8 (buf, fp->path_name,
+ [ 255s] | ~~^~~~~~~~~~~
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-04-23 Michael Chang <mchang@suse.com>
+
+ chainloader: Fix gcc9 error -Waddress-of-packed-member
+ The address of fp->path_name could be unaligned since seeking into the
+ device path buffer for a given node could end in byte boundary.
+
+ The fix is using aligned buffer allocated by grub_malloc for receiving
+ the converted UTF16 string by grub_utf8_to_utf16 and also the processing
+ after. The resulting string then gets copied to fp->path_name.
+
+ [ 243s] ../../grub-core/loader/efi/chainloader.c: In function 'copy_file_path':
+ [ 243s] ../../grub-core/loader/efi/chainloader.c:136:32: error: taking address of packed member of 'struct grub_efi_file_path_device_path' may result in an unaligned pointer value [-Werror=address-of-packed-member]
+ [ 243s] 136 | size = grub_utf8_to_utf16 (fp->path_name, len * GRUB_MAX_UTF16_PER_UTF8,
+ [ 243s] | ~~^~~~~~~~~~~
+ [ 243s] ../../grub-core/loader/efi/chainloader.c:138:12: error: taking address of packed member of 'struct grub_efi_file_path_device_path' may result in an unaligned pointer value [-Werror=address-of-packed-member]
+ [ 243s] 138 | for (p = fp->path_name; p < fp->path_name + size; p++)
+ [ 243s] | ^~
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-04-23 Michael Chang <mchang@suse.com>
+
+ usbtest: Disable gcc9 -Waddress-of-packed-member
+ Disable the -Wadress-of-packaed-member diagnostic for the
+ grub_usb_get_string function since the result is false postive. The
+ descstrp->str is found to be aligned in the buffer allocated for 'struct
+ grub_usb_desc_str'.
+
+ [ 229s] ../../grub-core/commands/usbtest.c: In function 'grub_usb_get_string':
+ [ 229s] ../../grub-core/commands/usbtest.c:104:58: error: taking address of packed member of 'struct grub_usb_desc_str' may result in an unaligned pointer value [-Werror=address-of-packed-member]
+ [ 229s] 104 | *grub_utf16_to_utf8 ((grub_uint8_t *) *string, descstrp->str,
+ [ 229s] | ~~~~~~~~^~~~~
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-04-23 Michael Chang <mchang@suse.com>
+
+ acpi: Fix gcc9 error -Waddress-of-packed-member
+ Simply adds the missing packed attribute to 'struct grub_acpi_madt'.
+
+ [ 233s] ../../grub-core/commands/lsacpi.c: In function 'disp_acpi_xsdt_table':
+ [ 233s] ../../grub-core/commands/lsacpi.c:201:27: error: converting a packed 'struct grub_acpi_table_header' pointer (alignment 1) to a 'struct grub_acpi_madt' pointer (alignment 4) may result in an unaligned pointer value [-Werror=address-of-packed-member]
+ [ 233s] 201 | disp_madt_table ((struct grub_acpi_madt *) t);
+ [ 233s] | ^~~~~~~~~~~~~~
+ [ 233s] In file included from ../../grub-core/commands/lsacpi.c:23:
+ [ 233s] ../../include/grub/acpi.h:50:8: note: defined here
+ [ 233s] 50 | struct grub_acpi_table_header
+ [ 233s] | ^~~~~~~~~~~~~~~~~~~~~~
+ [ 233s] ../../include/grub/acpi.h:90:8: note: defined here
+ [ 233s] 90 | struct grub_acpi_madt
+ [ 233s] | ^~~~~~~~~~~~~~
+ [ 233s] ../../grub-core/commands/lsacpi.c: In function 'disp_acpi_rsdt_table':
+ [ 233s] ../../grub-core/commands/lsacpi.c:225:27: error: converting a packed 'struct grub_acpi_table_header' pointer (alignment 1) to a 'struct grub_acpi_madt' pointer (alignment 4) may result in an unaligned pointer value [-Werror=address-of-packed-member]
+ [ 233s] 225 | disp_madt_table ((struct grub_acpi_madt *) t);
+ [ 233s] | ^~~~~~~~~~~~~~
+ [ 233s] In file included from ../../grub-core/commands/lsacpi.c:23:
+ [ 233s] ../../include/grub/acpi.h:50:8: note: defined here
+ [ 233s] 50 | struct grub_acpi_table_header
+ [ 233s] | ^~~~~~~~~~~~~~~~~~~~~~
+ [ 233s] ../../include/grub/acpi.h:90:8: note: defined here
+ [ 233s] 90 | struct grub_acpi_madt
+ [ 233s] | ^~~~~~~~~~~~~~
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-04-23 Michael Chang <mchang@suse.com>
+
+ hfsplus: Fix gcc9 error with -Waddress-of-packed-member
+ The catkey->name could be unaligned since the address of 'void* record'
+ is calculated as offset in bytes to a malloc buffer.
+
+ The fix is using aligned buffer allocated by grub_malloc for holding
+ the UTF16 string copied from catkey->name. And use that buffer as
+ argument for grub_utf16_to_utf8 to convert to UTF8 strings.
+
+ In addition, using a new copy of buffer rather than catkey->name itself
+ for processing the endianess conversion, we can also get rid of the hunk
+ restoring byte order of catkey->name to what it was previously.
+
+ [ 59s] ../grub-core/fs/hfsplus.c: In function 'list_nodes':
+ [ 59s] ../grub-core/fs/hfsplus.c:738:57: error: taking address of packed member of 'struct grub_hfsplus_catkey' may result in an unaligned pointer value [-Werror=address-of-packed-member]
+ [ 59s] 738 | *grub_utf16_to_utf8 ((grub_uint8_t *) filename, catkey->name,
+ [ 59s] | ~~~~~~^~~~~~
+ [ 59s] ../grub-core/fs/hfsplus.c: In function 'grub_hfsplus_label':
+ [ 59s] ../grub-core/fs/hfsplus.c:1019:57: error: taking address of packed member of 'struct grub_hfsplus_catkey' may result in an unaligned pointer value [-Werror=address-of-packed-member]
+ [ 59s] 1019 | *grub_utf16_to_utf8 ((grub_uint8_t *) (*label), catkey->name,
+ [ 59s] | ~~~~~~^~~~~~
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-04-23 Michael Chang <mchang@suse.com>
+
+ hfs: Fix gcc9 error -Waddress-of-packed-member
+ Simply adds the missing packed attribute to 'struct grub_hfs_extent'.
+
+ [ 83s] ../grub-core/fs/hfs.c: In function 'grub_hfs_iterate_records':
+ [ 83s] ../grub-core/fs/hfs.c:699:9: error: taking address of packed member of 'struct grub_hfs_sblock' may result in an unaligned pointer value [-Werror=address-of-packed-member]
+ [ 83s] 699 | ? (&data->sblock.catalog_recs)
+ [ 83s] | ~^~~~~~~~~~~~~~~~~~~~~~~~~~~
+ [ 83s] ../grub-core/fs/hfs.c:700:9: error: taking address of packed member of 'struct grub_hfs_sblock' may result in an unaligned pointer value [-Werror=address-of-packed-member]
+ [ 83s] 700 | : (&data->sblock.extent_recs));
+ [ 83s] | ~^~~~~~~~~~~~~~~~~~~~~~~~~~
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-04-23 Michael Chang <mchang@suse.com>
+
+ jfs: Disable gcc9 -Waddress-of-packed-member
+ Disable the -Wadress-of-packaed-member diagnostic for the
+ grub_jfs_getent function since the result is found to be false postive.
+
+ The leaf is read into memory as continous chunks in size of 32 bytes and
+ the pointer to its base is aligned, which also guarentee its member
+ leaf->namepart is aligned.
+
+ [ 60s] ../grub-core/fs/jfs.c: In function 'grub_jfs_getent':
+ [ 60s] ../grub-core/fs/jfs.c:557:44: error: taking address of packed member of 'struct grub_jfs_leaf_dirent' may result in an unaligned pointer value [-Werror=address-of-packed-member]
+ [ 60s] 557 | le_to_cpu16_copy (filename + strpos, leaf->namepart, len < diro->data->namecomponentlen ? len
+ [ 60s] | ~~~~^~~~~~~~~~
+ [ 60s] ../grub-core/fs/jfs.c:570:48: error: taking address of packed member of 'struct grub_jfs_leaf_next_dirent' may result in an unaligned pointer value [-Werror=address-of-packed-member]
+ [ 60s] 570 | le_to_cpu16_copy (filename + strpos, next_leaf->namepart, len < 15 ? len : 15);
+ [ 60s] | ~~~~~~~~~^~~~~~~~~~
+ [ 60s] cc1: all warnings being treated as errors
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-04-23 Michael Chang <mchang@suse.com>
+
+ cpio: Disable gcc9 -Waddress-of-packed-member
+ Disable the -Wadress-of-packaed-member diagnostic for the
+ grub_cpio_find_file function since the result is found to be false
+ postive. Any pointers to member of the 'struct head hd' is aligned even
+ if the structure is packed without paddings.
+
+ [ 59s] In file included from ../grub-core/fs/cpio.c:51:
+ [ 59s] ../grub-core/fs/cpio_common.c: In function 'grub_cpio_find_file':
+ [ 59s] ../grub-core/fs/cpio_common.c:58:31: error: taking address of packed member of 'struct head' may result in an unaligned pointer value [-Werror=address-of-packed-member]
+ [ 59s] 58 | data->size = read_number (hd.filesize, ARRAY_SIZE (hd.filesize));
+ [ 59s] | ~~^~~~~~~~~
+ [ 59s] ../grub-core/fs/cpio_common.c:60:29: error: taking address of packed member of 'struct head' may result in an unaligned pointer value [-Werror=address-of-packed-member]
+ [ 59s] 60 | *mtime = read_number (hd.mtime, ARRAY_SIZE (hd.mtime));
+ [ 59s] | ~~^~~~~~
+ [ 59s] ../grub-core/fs/cpio_common.c:61:28: error: taking address of packed member of 'struct head' may result in an unaligned pointer value [-Werror=address-of-packed-member]
+ [ 59s] 61 | modeval = read_number (hd.mode, ARRAY_SIZE (hd.mode));
+ [ 59s] | ~~^~~~~
+ [ 59s] ../grub-core/fs/cpio_common.c:62:29: error: taking address of packed member of 'struct head' may result in an unaligned pointer value [-Werror=address-of-packed-member]
+ [ 59s] 62 | namesize = read_number (hd.namesize, ARRAY_SIZE (hd.namesize));
+ [ 59s] | ~~^~~~~~~~~
+ [ 59s] In file included from ../grub-core/fs/cpio_be.c:51:
+ [ 59s] ../grub-core/fs/cpio_common.c: In function 'grub_cpio_find_file':
+ [ 59s] ../grub-core/fs/cpio_common.c:58:31: error: taking address of packed member of 'struct head' may result in an unaligned pointer value [-Werror=address-of-packed-member]
+ [ 59s] 58 | data->size = read_number (hd.filesize, ARRAY_SIZE (hd.filesize));
+ [ 59s] | ~~^~~~~~~~~
+ [ 59s] ../grub-core/fs/cpio_common.c:60:29: error: taking address of packed member of 'struct head' may result in an unaligned pointer value [-Werror=address-of-packed-member]
+ [ 59s] 60 | *mtime = read_number (hd.mtime, ARRAY_SIZE (hd.mtime));
+ [ 59s] | ~~^~~~~~
+ [ 59s] ../grub-core/fs/cpio_common.c:61:28: error: taking address of packed member of 'struct head' may result in an unaligned pointer value [-Werror=address-of-packed-member]
+ [ 59s] 61 | modeval = read_number (hd.mode, ARRAY_SIZE (hd.mode));
+ [ 59s] | ~~^~~~~
+ [ 59s] ../grub-core/fs/cpio_common.c:62:29: error: taking address of packed member of 'struct head' may result in an unaligned pointer value [-Werror=address-of-packed-member]
+ [ 59s] 62 | namesize = read_number (hd.namesize, ARRAY_SIZE (hd.namesize));
+ [ 59s] | ~~^~~~~~~~~
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-04-23 Heinrich Schuchardt <xypron.glpk@gmx.de>
+
+ efi: Avoid NULL dereference if FilePath is NULL
+ The UEFI specification allows LoadImage() to be called with a memory
+ location only and without a device path. In this case FilePath will not be
+ set in the EFI_LOADED_IMAGE_PROTOCOL.
+
+ So in function grub_efi_get_filename() the device path argument may be
+ NULL. As we cannot determine the device path in this case just return NULL
+ from the function.
+
+ Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-04-23 Daniel Kiper <daniel.kiper@oracle.com>
+
+ x86/msr: Fix build with older GCC versions
+ Some older GCC versions produce following error when x86 MSR modules are build:
+
+ In file included from commands/i386/rdmsr.c:29:0:
+ ../include/grub/i386/rdmsr.h:27:29: error: no previous prototype for ‘grub_msr_read’ [-Werror=missing-prototypes]
+ extern inline grub_uint64_t grub_msr_read (grub_uint32_t msr_id)
+ ^
+ cc1: all warnings being treated as errors
+
+ This happens due to lack of support for a such usage of extern keyword
+ in older GCCs. Additionally, this usage is not consistent with the rest
+ of codebase. So, replace it with static keyword.
+
+ Additionally, fix incorrect coding style.
+
+ Reported-by: Eric Snowberg <eric.snowberg@oracle.com>
+ Reported-by: adrian15 <adrian15sgd@gmail.com>
+ Reviewed-by: Vladimir 'phcoder' Serbinenko <phcoder@gmail.com>
+ Reviewed-by: Eric Snowberg <eric.snowberg@oracle.com>
+ Tested-by: adrian15 <adrian15sgd@gmail.com>
+
+2019-04-09 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Release 2.04~rc1
+
+2019-04-09 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Change fs functions to add fs_ prefix
+ This avoid conflict with gnulib
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-04-08 Vladimir Serbinenko <phcoder@google.com>
+
+ A workaround for clang problem assembling startup_raw.S
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-04-04 Eric Snowberg <eric.snowberg@oracle.com>
+
+ ieee1275: NULL pointer dereference in grub_ieee1275_encode_devname()
+ Function grub_strndup() may return NULL, this is called from
+ function grub_ieee1275_get_devname() which is then called from
+ function grub_ieee1275_encode_devname() to set device. The device
+ variable could then be used with a NULL pointer.
+
+ Reviewed-by: Colin Watson <cjwatson@ubuntu.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-04-02 Daniel Kiper <daniel.kiper@oracle.com>
+
+ docs/grub-dev: Change comments rules
+ Current comments forms are annoying, so, some of them are disallowed
+ starting from now. New rules are more flexible and mostly aligned
+ with, e.g., Linux kernel comments rules.
+
+ Reviewed-by: Vladimir Serbinenko <phcoder@google.com>
+
+2019-04-02 Andrew Jeddeloh <andrew.jeddeloh@coreos.com>
+
+ loader/i386/linux: Calculate the setup_header length
+ Previously the setup_header length was just assumed to be the size of the
+ linux_kernel_params struct. The linux x86 32-bit boot protocol says that the
+ end of the linux_i386_kernel_header is at 0x202 + the byte value at 0x201 in
+ the linux_i386_kernel_header. So, calculate the size of the header using the
+ end of the linux_i386_kernel_header, rather than assume it is the size of the
+ linux_kernel_params struct.
+
+ Additionally, add some required members to the linux_kernel_params
+ struct and align the content of linux_i386_kernel_header struct with
+ it. New members naming was taken directly from Linux kernel source.
+
+ linux_kernel_params and linux_i386_kernel_header structs require more
+ cleanup. However, this is not urgent, so, let's do this after release.
+ Just in case...
+
+ Reviewed-by: Vladimir Serbinenko <phcoder@google.com>
+ Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
+
+2019-04-02 Eric Snowberg <eric.snowberg@oracle.com>
+
+ efidisk: NULL pointer dereference in grub_efidisk_get_device_name()
+ Function grub_efi_find_last_device_path() may return NULL when called
+ from grub_efidisk_get_device_name().
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-04-02 Eric Snowberg <eric.snowberg@oracle.com>
+
+ efidisk: NULL pointer dereference in is_child()
+ Function grub_efi_find_last_device() path may return NULL when called
+ from is_child().
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-04-02 Eric Snowberg <eric.snowberg@oracle.com>
+
+ efidisk: Write to NULL pointer ldp
+ Function grub_efi_find_last_device_path() may return constant NULL when
+ called from find_parent_device().
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-04-02 Vladimir Serbinenko <phcoder@google.com>
+
+ clang: Pair -Qn with -Qunused-arguments.
+ When assembling module wirh clang -Qn ends up on command line but later ignored
+ To avoid it breaking the compile, add -Qunused-arguments.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-28 John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
+
+ ieee1275: Fix path reference in comment of sparc64 boot loader code
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-28 John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
+
+ ieee1275: Include a.out header in assembly of sparc64 boot loader
+ Recent versions of binutils dropped support for the a.out and COFF
+ formats on sparc64 targets. Since the boot loader on sparc64 is
+ supposed to be an a.out binary and the a.out header entries are
+ rather simple to calculate in our case, we just write the header
+ ourselves instead of relying on external tools to do that.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-26 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Propagate GNU_PRINTF from gnulib vfprintf
+ gnulib now replaces vfprintf and hence its format becomes GNU_PRINTF format
+
+ This also fixes matching definitions to always use GNU format
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-26 Vladimir Serbinenko <phcoder@gmail.com>
+
+ efi/tpm.c: Add missing casts
+ Without those casts we get a warning about implicit conversion of pointer
+ to integer.
+
+2019-03-26 Vladimir Serbinenko <phcoder@gmail.com>
+
+ POTFILES: Don't include gnulib in grub.pot
+ They're translated as a separate project, so we
+ don't want to submit them again.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-26 Vladimir Serbinenko <phcoder@google.com>
+
+ configure.ac: Use nostdlib when checking for nostdinc
+ With clang nostdinc behaviour is influenced by nostdlib. Since we
+ always add nostdlib, add it in test as well
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-25 Vladimir Serbinenko <phcoder@gmail.com>
+
+ efi/tpm.h: Fix hash_log_extend_event definition.
+ I didn't check the spec but pointer to address doesn't make much sense
+ and doesn't match the code.
+
+ Rename grub_disk members
+ Otherwise it horribly clashes with gnulib when it's
+ replacing open/write/read/close
+
+ grub-mkimagexx: Fix RISCV error message
+ Outputting a raw pointer doesn't match the format and is
+ also useless. Output offset instead.
+
+ kern/emu/misc.c: Don't include config-util.h when running as GRUB_BUILD
+
+ Support R_PPC_PLTREL24
+ It's emitted by clang 7. It's the same as R_PPC_REL24.
+
+2019-03-20 Daniel Kiper <daniel.kiper@oracle.com>
+
+ sparc: Enable __clzsi2() and __clzdi2()
+ This patch is similiar to commit e795b9011 (RISC-V: Add libgcc helpers
+ for clz) but for SPARC target.
+
+ Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
+
+2019-03-20 Daniel Kiper <daniel.kiper@oracle.com>
+
+ mips: Enable __clzsi2()
+ This patch is similiar to commit e795b9011 (RISC-V: Add libgcc helpers
+ for clz) but for MIPS target.
+
+ Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
+
+2019-03-20 Daniel Kiper <daniel.kiper@oracle.com>
+
+ verifiers: MIPS fallout cleanup
+ MIPS fallout cleanup after commit 4d4a8c96e (verifiers: Add possibility
+ to verify kernel and modules command lines).
+
+ Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
+
+2019-03-20 Daniel Kiper <daniel.kiper@oracle.com>
+
+ verifiers: PowerPC fallout cleanup
+ PowerPC fallout cleanup after commit 4d4a8c96e (verifiers: Add possibility
+ to verify kernel and modules command lines) and ca0a4f689 (verifiers: File
+ type for fine-grained signature-verification controlling).
+
+ Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
+
+2019-03-20 Daniel Kiper <daniel.kiper@oracle.com>
+
+ verifiers: IA-64 fallout cleanup
+ IA-64 fallout cleanup after commit 4d4a8c96e (verifiers: Add possibility
+ to verify kernel and modules command lines).
+
+ Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
+
+2019-03-20 Colin Watson <cjwatson@ubuntu.com>
+
+ posix_wrap: Flesh out posix_wrap/limits.h a little more
+ In addition to what was already there, Gnulib's <intprops.h> needs SCHAR_MIN,
+ SCHAR_MAX, SHRT_MIN, INT_MIN, LONG_MIN, and LONG_MAX. Fixes build on CentOS 7.
+
+ Reported-by: "Chen, Farrah" <farrah.chen@intel.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-19 Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
+
+ xen: Look for Xen notes in section headers too
+ Mirror behaviour of ELF loader in libxc: first look for Xen notes in
+ PT_NOTE segment, then in SHT_NOTE section and only then fallback to
+ a section with __xen_guest name. This fixes loading PV kernels that
+ Xen note have outside of PT_NOTE. While this may be result of a buggy
+ linker script, loading such kernel directly works fine, so make it work
+ with GRUB too. Specifically, this applies to binaries built from Unikraft.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-19 Colin Watson <cjwatson@ubuntu.com>
+
+ getroot: Save/restore CWD more reliably on Unix
+ Various GRUB utilities fail if the current directory doesn't exist,
+ because grub_find_device() chdirs to a different directory and then
+ fails when trying to chdir back. Gnulib's save-cwd module uses fchdir()
+ instead when it can, avoiding this category of problem.
+
+ Fixes Debian bug #918700.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-12 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ net/dhcp: Add explicit net_dhcp command
+ Mostly for cosmetic reasons, we add a "net_dhcp" command, which is (at the
+ moment) identical to the existing "net_bootp" command. Both actually trigger
+ a DHCP handshake now, and both should be able to deal with pure BOOTP servers.
+ We could think about dropping the DHCP options from the initial DISCOVER packet
+ when the user issues the net_bootp command, but it's unclear whether this is
+ really useful, as both protocols should be able to coexist.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-12 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ net/dhcp: Actually send out DHCPv4 DISCOVER and REQUEST messages
+ Even though we were parsing some DHCP options sent by the server, so far
+ we are only using the BOOTP 2-way handshake, even when talking to a DHCP
+ server.
+
+ Change this by actually sending out DHCP DISCOVER packets instead of the
+ generic (mostly empty) BOOTP BOOTREQUEST packets.
+
+ A pure BOOTP server would ignore the extra DHCP options in the DISCOVER
+ packet and would just reply with a BOOTREPLY packet, which we also
+ handle in the code.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-12 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ net/dhcp: Allow receiving DHCP OFFER and ACK packets
+ In respone to a BOOTREQUEST packet a BOOTP server would answer with a BOOTREPLY
+ packet, which ends the conversation for good. DHCP uses a 4-way handshake,
+ where the initial server respone is an OFFER, which has to be answered with
+ REQUEST by the client again, only to be completed by an ACKNOWLEDGE packet
+ from the server.
+
+ Teach the grub_net_process_dhcp() function to deal with OFFER packets,
+ and treat ACK packets the same es BOOTREPLY packets.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-12 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ net/dhcp: Use DHCP options for name and bootfile
+ The BOOTP RFC describes the boot file name and the server name as being part
+ of the integral BOOTP data structure, with some limits on the size of them.
+ DHCP extends this by allowing them to be separate DHCP options, which is more
+ flexible.
+
+ Teach the code dealing with those fields to check for those DHCP options first
+ and use this information, if provided. We fall back to using the BOOTP
+ information if those options are not used.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-12 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ net/dhcp: Introduce per-interface timeout
+ Currently we have a global timeout for all network cards in the BOOTP/DHCP
+ discovery process.
+
+ Make this timeout a per-interface one, so better accommodate the upcoming
+ 4-way DHCP handshake and to also cover the lease time limit a DHCP offer
+ will come with.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-12 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ net/dhcp: Make grub_net_process_dhcp() take an interface
+ Change the interface of the function dealing with incoming BOOTP packets
+ to take an interface instead of a card, to allow more fine per-interface
+ state (timeout, handshake state) later on.
+
+ Use the opportunity to clean up the code a bit.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-12 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ net/dhcp: Refactor DHCP packet transmission into separate function
+ In contrast to BOOTP, DHCP uses a 4-way handshake, so requires to send
+ packets more often.
+
+ Refactor the generation and sending of the BOOTREQUEST packet into
+ a separate function, so that future code can more easily reuse this.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-12 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ net/dhcp: Allow overloading legacy bootfile and name field
+ DHCP specifies a special dummy option OVERLOAD, to allow DHCP options to
+ spill over into the (legacy) BOOTFILE and SNAME fields.
+
+ Parse and handle this option properly.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-12 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ net/dhcp: Replace parse_dhcp_vendor() with find_dhcp_option()
+ For proper DHCP support we will need to parse DHCP options from a packet
+ more often and at various places.
+
+ Refactor the option parsing into a new function, which will scan a packet to
+ find *a particular* option field. Use that new function in places where we
+ were dealing with DHCP options before.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-12 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ net/dhcp: Remove dead code
+ The comment is right, the "giaddr" fields holds the IP address of the BOOTP
+ relay, not a general purpose router address. Just remove the commented code,
+ archeologists can find it in the git history.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-12 Jesús Diéguez Fernández <jesusdf@gmail.com>
+
+ msr: Add new MSR modules (rdmsr/wrmsr)
+ In order to be able to read from and write to model-specific registers,
+ two new modules are added. They are i386 specific, as the cpuid module.
+
+ rdmsr module registers the command rdmsr that allows reading from a MSR.
+ wrmsr module registers the command wrmsr that allows writing to a MSR.
+
+ wrmsr module is disabled if UEFI secure boot is enabled.
+
+ Please note that on SMP systems, interacting with a MSR that has a scope
+ per hardware thread, implies that the value only applies to the
+ particular cpu/core/thread that ran the command.
+
+ Also, if you specify a reserved or unimplemented MSR address, it will
+ cause a general protection exception (which is not currently being
+ handled) and the system will reboot.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-12 Jesús Diéguez Fernández <jesusdf@gmail.com>
+
+ asm: Replace "__asm__ __volatile__" with "asm volatile"
+ In order to maintain the coding style consistency, it was requested to
+ replace the methods that use "__asm__ __volatile__" with "asm volatile".
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-12 Eric Snowberg <eric.snowberg@oracle.com>
+
+ sparc64: Add bios boot partition support
+ Add BIOS Boot Partition support for sparc64 platforms. This will work a
+ little different than x86. With GPT, both the OBP "load" and "boot" commands
+ are partition aware and neither command can see the partition table. Therefore
+ the entire boot-loader is stored within the BIOS Boot Partition and nothing
+ is stored within the bootstrap code area of MBR.
+
+ To use it, the end user will issue the boot command with the path pointing to
+ the BIOS Boot Partition.
+
+ For example with the disk below:
+
+ Model: Unknown (unknown)
+ Disk /dev/nvme1n1: 1600GB
+ Sector size (logical/physical): 512B/512B
+ Partition Table: gpt
+
+ Number Start End Size File system Name Flags
+ 1 1049kB 1075MB 1074MB ext3
+ 2 1075MB 1076MB 1049kB bios_grub
+ 3 1076MB 1600GB 1599GB lvm
+
+ To boot grub2 from OBP, you would use:
+
+ boot /pci@302/pci@1/pci@0/pci@13/nvme@0/disk@1:b
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-12 Eric Snowberg <eric.snowberg@oracle.com>
+
+ ieee1275: obdisk driver
+ Add a new disk driver called obdisk for IEEE1275 platforms. Currently
+ the only platform using this disk driver is SPARC, however other IEEE1275
+ platforms could start using it if they so choose. While the functionality
+ within the current IEEE1275 ofdisk driver may be suitable for PPC and x86, it
+ presented too many problems on SPARC hardware.
+
+ Within the old ofdisk, there is not a way to determine the true canonical
+ name for the disk. Within Open Boot, the same disk can have multiple names
+ but all reference the same disk. For example the same disk can be referenced
+ by its SAS WWN, using this form:
+
+ /pci@302/pci@2/pci@0/pci@17/LSI,sas@0/disk@w5000cca02f037d6d,0
+
+ It can also be referenced by its PHY identifier using this form:
+
+ /pci@302/pci@2/pci@0/pci@17/LSI,sas@0/disk@p0
+
+ It can also be referenced by its Target identifier using this form:
+
+ /pci@302/pci@2/pci@0/pci@17/LSI,sas@0/disk@0
+
+ Also, when the LUN=0, it is legal to omit the ,0 from the device name. So with
+ the disk above, before taking into account the device aliases, there are 6 ways
+ to reference the same disk.
+
+ Then it is possible to have 0 .. n device aliases all representing the same disk.
+ Within this new driver the true canonical name is determined using the the
+ IEEE1275 encode-unit and decode-unit commands when address_cells == 4. This
+ will determine the true single canonical name for the device so multiple ihandles
+ are not opened for the same device. This is what frequently happens with the old
+ ofdisk driver. With some devices when they are opened multiple times it causes
+ the entire system to hang.
+
+ Another problem solved with this driver is devices that do not have a device
+ alias can be booted and used within GRUB. Within the old ofdisk, this was not
+ possible, unless it was the original boot device. All devices behind a SAS
+ or SCSI parent can be found. Within the old ofdisk, finding these disks
+ relied on there being an alias defined. The alias requirement is not
+ necessary with this new driver. It can also find devices behind a parent
+ after they have been hot-plugged. This is something that is not possible
+ with the old ofdisk driver.
+
+ The old ofdisk driver also incorrectly assumes that the device pointing to by a
+ device alias is in its true canonical form. This assumption is never made with
+ this new driver.
+
+ Another issue solved with this driver is that it properly caches the ihandle
+ for all open devices. The old ofdisk tries to do this by caching the last
+ opened ihandle. However this does not work properly because the layer above
+ does not use a consistent device name for the same disk when calling into the
+ driver. This is because the upper layer uses the bootpath value returned within
+ /chosen, other times it uses the device alias, and other times it uses the
+ value within grub.cfg. It does not have a way to figure out that these devices
+ are the same disk. This is not a problem with this new driver.
+
+ Due to the way GRUB repeatedly opens and closes the same disk. Caching the
+ ihandle is important on SPARC. Without caching, some SAS devices can take
+ 15 - 20 minutes to get to the GRUB menu. This ihandle caching is not possible
+ without correctly having the canonical disk name.
+
+ When available, this driver also tries to use the deblocker #blocks and
+ a way of determining the disk size.
+
+ Finally and probably most importantly, this new driver is also capable of
+ seeing all partitions on a GPT disk. With the old driver, the GPT
+ partition table can not be read and only the first partition on the disk
+ can be seen.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-12 Paul Menzel <pmenzel@molgen.mpg.de>
+
+ Makefile: Allow to set file systems modules for default_payload.elf
+ By default all file system modules are added to the GRUB coreboot
+ payload `default_payload.elf`. This makes the image quite big,
+ especially as often not all modules are needed.
+
+ Introduce the variable `FS_PAYLOAD_MODULES`, which can be used to
+ explicitly set file systems modules to be added.
+
+ $ make default_payload.elf
+ test -f default_payload.elf && rm default_payload.elf || true
+ pkgdatadir=. ./grub-mkstandalone --grub-mkimage=./grub-mkimage -O i386-coreboot -o default_payload.elf --modules='ahci pata ehci uhci ohci usb_keyboard usbms part_msdos ext2 fat at_keyboard part_gpt usbserial_usbdebug cbfs' --install-modules='ls linux search configfile normal cbtime cbls memrw iorw minicmd lsmmap lspci halt reboot hexdump pcidump regexp setpci lsacpi chain test serial multiboot cbmemc linux16 gzio echo help syslinuxcfg xnu affs afs bfs btrfs cbfs cpio cpio_be exfat ext2 f2fs fat hfs hfsplus iso9660 jfs minix minix2 minix2_be minix3 minix3_be minix_be newc nilfs2 ntfs odc procfs reiserfs romfs sfs squash4 tar udf ufs1 ufs1_be ufs2 xfs zfs password_pbkdf2 ' --fonts= --themes= --locales= -d grub-core/ /boot/grub/grub.cfg=./coreboot.cfg
+ $ ls -l default_payload.elf
+ -rw-rw---- 1 joey joey 1199568 Mar 6 13:58 default_payload.elf
+
+ $ make default_payload.elf FS_PAYLOAD_MODULES="" # ext2 already in `--modules`
+ test -f default_payload.elf && rm default_payload.elf || true
+ pkgdatadir=. ./grub-mkstandalone --grub-mkimage=./grub-mkimage -O i386-coreboot -o default_payload.elf --modules='ahci pata ehci uhci ohci usb_keyboard usbms part_msdos ext2 fat at_keyboard part_gpt usbserial_usbdebug cbfs' --install-modules='ls linux search configfile normal cbtime cbls memrw iorw minicmd lsmmap lspci halt reboot hexdump pcidump regexp setpci lsacpi chain test serial multiboot cbmemc linux16 gzio echo help syslinuxcfg xnu password_pbkdf2 ' --fonts= --themes= --locales= -d grub-core/ /boot/grub/grub.cfg=./coreboot.cfg
+ $ ls -l default_payload.elf
+ -rw-rw---- 1 joey joey 832976 Mar 7 12:13 default_payload.elf
+
+ So, the resulting payload size is around 370 kB smaller. (Adding it to
+ the CBFS, it will be compressed, so the effective size difference will
+ be smaller.)
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-07 Vladimir Serbinenko <phcoder@gmail.com>
+
+ windows/platform.c: Fix compilation errors
+
+2019-03-05 Colin Watson <cjwatson@ubuntu.com>
+
+ gnulib: Upgrade Gnulib and switch to bootstrap tool
+ Upgrade Gnulib files to 20190105.
+
+ It's much easier to maintain GRUB's use of portability support files
+ from Gnulib when the process is automatic and driven by a single
+ configuration file, rather than by maintainers occasionally running
+ gnulib-tool and committing the result. Removing these
+ automatically-copied files from revision control also removes the
+ temptation to hack the output in ways that are difficult for future
+ maintainers to follow. Gnulib includes a "bootstrap" program which is
+ designed for this.
+
+ The canonical way to bootstrap GRUB from revision control is now
+ "./bootstrap", but "./autogen.sh" is still useful if you just want to
+ generate the GRUB-specific parts of the build system.
+
+ GRUB now requires Autoconf >= 2.63 and Automake >= 1.11, in line with
+ Gnulib.
+
+ Gnulib source code is now placed in grub-core/lib/gnulib/ (which should
+ not be edited directly), and GRUB's patches are in
+ grub-core/lib/gnulib-patches/. I've added a few notes to the developer
+ manual on how to maintain this.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-05 Colin Watson <cjwatson@ubuntu.com>
+
+ syslinux: Fix syslinux_test in out-of-tree builds
+ syslinux_parse simplifies some filenames by removing things like ".."
+ segments, but the tests assumed that @abs_top_srcdir@ would be
+ untouched, which is not true in the case of out-of-tree builds where
+ @abs_top_srcdir@ may contain ".." segments.
+
+ Performing the substitution requires some awkwardness in Makefile.am due
+ to details of how config.status works.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-05 Colin Watson <cjwatson@ubuntu.com>
+
+ util: Detect more I/O errors
+ Many of GRUB's utilities don't check anywhere near all the possible
+ write errors. For example, if grub-install runs out of space when
+ copying a file, it won't notice. There were missing checks for the
+ return values of write, fflush, fsync, and close (or the equivalents on
+ other OSes), all of which must be checked.
+
+ I tried to be consistent with the existing logging practices of the
+ various hostdisk implementations, but they weren't entirely consistent
+ to start with so I used my judgement. The result at least looks
+ reasonable on GNU/Linux when I provoke a write error:
+
+ Installing for x86_64-efi platform.
+ grub-install: error: cannot copy `/usr/lib/grub/x86_64-efi-signed/grubx64.efi.signed' to `/boot/efi/EFI/debian/grubx64.efi': No space left on device.
+
+ There are more missing checks in other utilities, but this should fix
+ the most critical ones.
+
+ Fixes Debian bug #922741.
+
+ Reviewed-by: Steve McIntyre <93sam@debian.org>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-03-05 James Clarke <jrtc27@jrtc27.com>
+
+ osdep/freebsd: Fix partition calculation for EBR entries
+ For EBR partitions, "start" is the relative starting sector of the EBR
+ header itself, whereas "offset" is the relative starting byte of the
+ partition's contents, excluding the EBR header and any padding. Thus we
+ must use "offset", and divide by the sector size to convert to sectors.
+
+ Fixes Debian bug #923253.
+
+ Reviewed-by: Colin Watson <cjwatson@ubuntu.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-02-26 Steve McIntyre <93sam@debian.org>
+
+ grub-install: Check for arm-efi as a default target
+ Much like on x86, we can work out if the system is running on top of EFI
+ firmware. If so, return "arm-efi". If not, fall back to "arm-uboot" as
+ previously.
+
+ Split out the code to (maybe) load the efivar module and check for
+ /sys/firmware/efi into a common helper routine is_efi_system().
+
+ Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-02-26 Daniel Kiper <daniel.kiper@oracle.com>
+
+ Revert "grub-install: Check for arm-efi as a default target"
+ This reverts commit 082fd84d525f8d6602f892160b77c0a948308a78.
+
+ Incorrect version of the patch was pushed into the git repo.
+
+ Reported-by: Leif Lindholm <leif.lindholm@linaro.org>
+
+2019-02-25 Alexander Graf <agraf@suse.de>
+
+ travis: Add Travis CI config file
+ There is a really convenient service for open source project from Travis
+ CI: They allow for free CI testing using their infrastructure.
+
+ GRUB has had issues with broken builds for various targets for a long time
+ already. The main reason is a lack of CI to just do smoke tests on whether
+ all targets still at least compile.
+
+ This patch adds a Travis config file which builds (almost) all currently
+ available targets.
+
+ On top of that, this Travis config also runs a small execution test on the
+ x86_64-efi target.
+
+ All of this config file can easily be extended further on. It probably
+ makes sense to do something similar to the u-boot test infrastructure
+ that communicates with the payload properly. Going forward, we also will
+ want to do more QEMU runtime checks for other targets.
+
+ Currently, with this config alone, I already see about half of the available
+ targets as broken. So it's definitely desperately needed :).
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-02-25 Steve McIntyre <93sam@debian.org>
+
+ grub-install: Check for arm-efi as a default target
+ Much like on x86, we can work out if the system is running on top
+ of EFI firmware. If so, return "arm-efi". If not, fall back to
+ "arm-uboot" as previously.
+
+ Heavily inspired by the existing code for x86.
+
+ Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-02-25 Leif Lindholm <leif.lindholm@linaro.org>
+
+ arm64/efi: Fix grub_efi_get_ram_base()
+ grub_efi_get_ram_base() looks for the lowest available RAM address by
+ traversing the memory map, comparing lowest address found so far.
+ Due to a brain glitch, that "so far" was initialized to GRUB_UINT_MAX -
+ completely preventing boot on systems without RAM below 4GB.
+
+ Change the initial value to GRUB_EFI_MAX_USABLE_ADDRESS, as originally
+ intended.
+
+ Reported-by: Steve McIntyre <93sam@debian.org>
+ Tested-by: Steve McIntyre <93sam@debian.org>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-02-25 Paul Menzel <pmenzel@molgen.mpg.de>
+
+ normal/menu: Do not treat error values as key presses
+ Some terminals, like `grub-core/term/at_keyboard.c`, return `-1` in case
+ they are not ready yet.
+
+ if (! KEYBOARD_ISREADY (grub_inb (KEYBOARD_REG_STATUS)))
+ return -1;
+
+ Currently, that is treated as a key press, and the menu time-out is
+ cancelled/cleared. This is unwanted, as the boot is stopped and the user
+ manually has to select a menu entry. Therefore, adapt the condition to
+ require the key value also to be greater than 0.
+
+ `GRUB_TERM_NO_KEY` is defined as 0, so the condition could be collapsed
+ to greater or equal than (≥) 0, but the compiler will probably do that
+ for us anyway, so keep the cases separate for clarity.
+
+ This is tested with coreboot, the GRUB default payload, and the
+ configuration file `grub.cfg` below.
+
+ For GRUB:
+
+ $ ./autogen.sh
+ $ ./configure --with-platform=coreboot
+ $ make -j`nproc`
+ $ make default_payload.elf
+
+ For coreboot:
+
+ $ more grub.cfg
+ serial --unit 0 --speed 115200
+ set timeout=5
+
+ menuentry 'halt' {
+ halt
+ }
+ $ build/cbfstool build/coreboot.rom add-payload \
+ -f /dev/shm/grub/default_payload.elf -n fallback/payload -c lzma
+ $ build/cbfstool build/coreboot.rom add -f grub.cfg -n etc/grub.cfg -t raw
+ $ qemu-system-x86_64 --version
+ QEMU emulator version 3.1.0 (Debian 1:3.1+dfsg-2+b1)
+ Copyright (c) 2003-2018 Fabrice Bellard and the QEMU Project developers
+ $ qemu-system-x86_64 -M pc -bios build/coreboot.rom -serial stdio -nic none
+
+ Currently, the time-out is cancelled/cleared. With the commit, it is not.
+ With a small GRUB payload, this the problem is also reproducible on the
+ ASRock E350M1.
+
+ Link: http://lists.gnu.org/archive/html/grub-devel/2019-01/msg00037.html
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-02-25 Alexander Graf <agraf@suse.de>
+
+ fdt: Treat device tree file type like ACPI
+ We now have signature check logic in grub which allows us to treat
+ files differently depending on their file type.
+
+ Treat a loaded device tree like an overlayed ACPI table.
+ Both describe hardware, so I suppose their threat level is the same.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
+
+2019-02-25 Alexander Graf <agraf@suse.de>
+
+ RISC-V: Add to build system
+ This patch adds support for RISC-V to the grub build system. With this
+ patch, I can successfully build grub on RISC-V as a UEFI application.
+
+ Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
+ Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
+ Tested-by: Bin Meng <bmeng.cn@gmail.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-02-25 Alexander Graf <agraf@suse.de>
+
+ RISC-V: Add libgcc helpers for clz
+ Gcc may decide it wants to call helper functions to execute clz. Provide
+ them in our own copy of libgcc.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-02-25 Alexander Graf <agraf@suse.de>
+
+ RISC-V: Add auxiliary files
+ To support a new architecture we need to provide a few helper functions
+ for memory, cache, timer, etc support.
+
+ This patch adds the remainders of those. Some bits are still disabled,
+ as I couldn't guarantee that we're always running on models / in modes
+ where the respective hardware is available.
+
+ Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-02-25 Alexander Graf <agraf@suse.de>
+
+ RISC-V: Add awareness for RISC-V reloations
+ This patch adds awareness of RISC-V relocations throughout the grub tools
+ as well as dynamic linkage and elf->PE relocation conversion support.
+
+ Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-02-25 Alexander Graf <agraf@suse.de>
+
+ RISC-V: Add Linux load logic
+ We currently only support to run grub on RISC-V as UEFI payload. Ideally,
+ we also only want to support running Linux underneath as UEFI payload.
+
+ Prepare that with some Linux boot stub code. Once the arm64 target is
+ generalized, we can hook into that one and gain boot functionality.
+
+ Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-02-25 Alexander Graf <agraf@suse.de>
+
+ RISC-V: Add early startup code
+ On entry, we need to save the system table pointer as well as our image
+ handle. Add an early startup file that saves them and then brings us
+ into our main function.
+
+ Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
+ Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
+ Tested-by: Bin Meng <bmeng.cn@gmail.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-02-25 Alexander Graf <agraf@suse.de>
+
+ RISC-V: Add setjmp implementation
+ This patch adds a 32/64 capable setjmp implementation for RISC-V.
+
+ Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
+ Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
+ Tested-by: Bin Meng <bmeng.cn@gmail.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-02-25 Alexander Graf <agraf@suse.de>
+
+ elf.h: Add RISC-V definitions
+ The RISC-V ABI document outlines ELF header structure and relocation
+ information. Pull the respective magic numbers into our elf header
+ so we can make use of them.
+
+ Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
+ Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
+ Tested-by: Bin Meng <bmeng.cn@gmail.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-02-25 Alexander Graf <agraf@suse.de>
+
+ PE: Add RISC-V definitions
+ The PE format defines magic numbers as well as relocation identifiers for
+ RISC-V. Add them to our include file, so we can make use of them.
+
+ Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
+ Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
+ Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
+ Tested-by: Bin Meng <bmeng.cn@gmail.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-02-25 Alexander Graf <agraf@suse.de>
+
+ efi: Rename armxx to arch
+ Some architectures want to boot Linux as plain UEFI binary. Today that
+ really only encompasses ARM and AArch64, but going forward more
+ architectures may adopt that model.
+
+ So rename our internal API accordingly.
+
+ Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
+ Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
+ Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
+ Tested-by: Bin Meng <bmeng.cn@gmail.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-02-06 Alexander Graf <agraf@suse.de>
+
+ mkimage: Clarify file alignment in efi case
+ There are a few spots in the PE generation code for EFI binaries that uses
+ the section alignment rather than file alignment, even though the alignment
+ is really only file bound.
+
+ Replace those cases with the file alignment constant instead.
+
+ Reported-by: Daniel Kiper <dkiper@net-space.pl>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: Julien ROBIN <julien.robin28@free.fr>
+
+2019-02-06 Alexander Graf <agraf@suse.de>
+
+ mkimage: Align efi sections on 4k boundary
+ There is UEFI firmware popping up in the wild now that implements stricter
+ permission checks using NX and write protect page table entry bits.
+
+ This means that firmware now may fail to load binaries if its individual
+ sections are not page aligned, as otherwise it can not ensure permission
+ boundaries.
+
+ So let's bump all efi section alignments up to 4k (EFI page size). That way
+ we will stay compatible going forward.
+
+ Unfortunately our internals can't deal very well with a mismatch of alignment
+ between the virtual and file offsets, so we have to also pad our target
+ binary a bit.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: Julien ROBIN <julien.robin28@free.fr>
+
+2019-02-06 Alexander Graf <agraf@suse.de>
+
+ mkimage: Use EFI32_HEADER_SIZE define in arm-efi case
+ The efi-arm case was defining its own header size calculation, even though it's
+ 100% identical to the common EFI32_HEADER_SIZE definition.
+
+ So let's clean it up to use the common define.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: Julien ROBIN <julien.robin28@free.fr>
+
+2019-02-06 Guillaume GARDET <guillaume.gardet@arm.com>
+
+ arm: Move initrd upper to leave more space for kernel
+ This patch allows to have bigger kernels. If the kernel grows, then it will
+ overwrite the initrd when it is extracted.
+
+ Acked-by: Alexander Graf <agraf@suse.de>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-01-23 Leif Lindholm <leif.lindholm@linaro.org>
+
+ linux, efi, arm*, fdt: Break FDT extra allocation space out into a #define
+ A certain amount of dynamic space is required for the handover from
+ GRUB/Linux-EFI-stub. This entails things like initrd addresses,
+ address-cells entries and associated strings.
+
+ But move this into a proper centralised #define rather than live-code
+ it in the loader.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-01-22 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+
+ uboot: Add the missing disk write operation support
+ uboot_disk_write() is currently lacking the write support
+ to storage devices because, historically, those devices did not
+ implement block_write() in U-Boot.
+
+ The solution has been tested using a patched U-Boot loading
+ and booting GRUB in a QEMU vexpress-a9 environment.
+ The disk write operations were triggered with GRUB's save_env
+ command.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-01-21 Max Tottenham <mtottenh@akamai.com>
+
+ tpm: Fix bug in GRUB2 TPM module
+ The value of tpm_handle changes between successive calls to grub_tpm_handle_find(),
+ as instead of simply copying the stored pointer we end up taking the address of
+ said pointer when using the cached value of grub_tpm_handle.
+
+ This causes grub_efi_open_protocol() to return a nullptr in grub_tpm2_execute()
+ and grub_tpm2_log_event(). Said nullptr goes unchecked and
+ efi_call_5(tpm->hash_log_extend_event,...) ends up jumping to 0x0, Qemu crashes
+ once video ROM is reached at 0xb0000.
+
+ This patch seems to do the trick of fixing that bug, but we should also ensure
+ that all calls to grub_efi_open_protocol() are checked so that we don't start
+ executing low memory.
+
+ Reviewed-by: Matthew Garrett <mjg59@google.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-01-14 Colin Watson <cjwatson@ubuntu.com>
+
+ pgp: Fix emu build and tests after pgp module renaming
+ Commit b07feb8746c3bb845e3f0d33d37c0bded704d14d (verifiers: Rename
+ verify module to pgp module) renamed the "verify" module to "pgp", but
+ the GRUB_MOD_INIT and GRUB_MOD_FINI macros were left as "verify", which
+ broke the emu target build; and file_filter_test still referred to the
+ now non-existent "verify" module. Fix both of these.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-01-14 Peter Große <pegro@friiks.de>
+
+ grub-mkconfig/20_linux_xen: Support multiple early initrd images
+ Add support for multiple, shared, early initrd images. These early
+ images will be loaded in the order declared, and all will be loaded
+ before the initrd image.
+
+ While many classes of data can be provided by early images, the
+ immediate use case would be for distributions to provide CPU
+ microcode to mitigate the Meltdown and Spectre vulnerabilities.
+
+ Xen has also support to load microcode updates provided as additional
+ modules by the bootloader.
+
+ There are two environment variables provided for declaring the early
+ images.
+
+ * GRUB_EARLY_INITRD_LINUX_STOCK is for the distribution declare
+ images that are provided by the distribution or installed packages.
+ If undeclared, this will default to a set of common microcode image
+ names.
+
+ * GRUB_EARLY_INITRD_LINUX_CUSTOM is for user created images. User
+ images will be loaded after the stock images.
+
+ These separate configurations allow the distribution and user to
+ declare different image sets without clobbering each other.
+
+ This also makes a minor update to ensure that UUID partition labels
+ stay disabled when no initrd image is found, even if early images are
+ present.
+
+ This is basically a copy of a698240d "grub-mkconfig/10_linux: Support
+ multiple early initrd images" by Matthew S. Turnbull.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2019-01-14 Heinrich Schuchardt <xypron.glpk@gmx.de>
+
+ grub-core/loader/efi/fdt.c: Do not copy random memory
+ We should not try to copy any memory area which is outside of the original
+ fdt. If this extra memory is controlled by a hypervisor this might end
+ with a crash.
+
+ Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-12-12 Matthew Garrett <matthewgarrett@google.com>
+
+ verifiers: Add TPM documentation
+ Describe the behaviour of GRUB when the TPM module is in use.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-12-12 Matthew Garrett <mjg59@google.com>
+
+ verifiers: Core TPM support
+ Add support for performing basic TPM measurements. Right now this only
+ supports extending PCRs statically and only on UEFI. In future we might
+ want to have some sort of mechanism for choosing which events get logged
+ to which PCRs, but this seems like a good default policy and we can wait
+ to see whether anyone has a use case before adding more complexity.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-12-12 Matthew Garrett <mjg59@google.com>
+
+ verifiers: Verify commands executed by grub
+ Pass all commands executed by GRUB to the verifiers layer. Most verifiers will
+ ignore this, but some (such as the TPM verifier) want to be able to measure and
+ log each command executed in order to ensure that the boot state is as expected.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-12-12 Juergen Gross <jgross@suse.com>
+
+ xen_pvh: Add support to configure
+ Support platform i386/xen_pvh in configure.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: Hans van Kranenburg <hans@knorrie.org>
+
+2018-12-12 Juergen Gross <jgross@suse.com>
+
+ xen_pvh: Support grub-install for xen_pvh
+ Add xen_pvh support to grub-install.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: Hans van Kranenburg <hans@knorrie.org>
+
+2018-12-12 Juergen Gross <jgross@suse.com>
+
+ xen_pvh: Support building a standalone image
+ Support mkimage for xen_pvh.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: Hans van Kranenburg <hans@knorrie.org>
+
+2018-12-12 Juergen Gross <jgross@suse.com>
+
+ xen: Use elfnote defines instead of plain numbers
+ In order to avoid using plain integers for the ELF notes use the
+ available Xen include instead.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: Hans van Kranenburg <hans@knorrie.org>
+
+2018-12-12 Hans van Kranenburg <hans@knorrie.org>
+
+ grub-module-verifier: Ignore all_video for xen_pvh
+ This solves the build failing with "Error: no symbol table and no
+ .moddeps section"
+
+ Also see:
+ - 6371e9c10433578bb236a8284ddb9ce9e201eb59
+ - https://savannah.gnu.org/bugs/?49012
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: Hans van Kranenburg <hans@knorrie.org>
+
+2018-12-12 Juergen Gross <jgross@suse.com>
+
+ xen_pvh: Add build runes for grub-core
+ Add the modifications to the build system needed to build a xen_pvh
+ grub.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: Hans van Kranenburg <hans@knorrie.org>
+
+2018-12-12 Juergen Gross <jgross@suse.com>
+
+ xen: Init memory regions for PVH
+ Add all usable memory regions to grub memory management and add the
+ needed mmap iterate code, which will be used by grub core (e.g.
+ grub-core/lib/relocator.c or grub-core/mmap/mmap.c).
+
+ As we are running in 32-bit mode don't add memory above 4GB.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: Hans van Kranenburg <hans@knorrie.org>
+
+2018-12-12 Juergen Gross <jgross@suse.com>
+
+ xen: Setup Xen specific data for PVH
+ Initialize the needed Xen specific data. This is:
+
+ - the Xen start of day page containing the console and Xenstore ring
+ page PFN and event channel
+ - the grant table
+ - the shared info page
+
+ Write back the possibly modified memory map to the hypervisor in case
+ the guest is reading it from there again.
+
+ Set the RSDP address for the guest from the start_info page passed
+ as boot parameter.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
+ Tested-by: Hans van Kranenburg <hans@knorrie.org>
+
+2018-12-12 Juergen Gross <jgross@suse.com>
+
+ xen: Get memory map from hypervisor for PVH
+ Retrieve the memory map from the hypervisor and normalize it to contain
+ no overlapping entries and to be sorted by address.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: Hans van Kranenburg <hans@knorrie.org>
+
+2018-12-12 Juergen Gross <jgross@suse.com>
+
+ xen: Setup hypercall page for PVH
+ Add the needed code to setup the hypercall page for calling into the
+ Xen hypervisor.
+
+ Import the XEN_HVM_DEBUGCONS_IOPORT define from Xen unstable into
+ include/xen/arch-x86/xen.h
+
+ Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: Hans van Kranenburg <hans@knorrie.org>
+
+2018-12-12 Juergen Gross <jgross@suse.com>
+
+ xen: Add PVH boot entry code
+ Add the code for the Xen PVH mode boot entry.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: Hans van Kranenburg <hans@knorrie.org>
+
+2018-12-12 Juergen Gross <jgross@suse.com>
+
+ xen: Add basic hooks for PVH in current code
+ Add the hooks to current code needed for Xen PVH. They will be filled
+ with code later when the related functionality is being added.
+
+ loader/i386/linux.c needs to include machine/kernel.h now as it needs
+ to get GRUB_KERNEL_USE_RSDP_ADDR from there. This in turn requires to
+ add an empty kernel.h header for some i386 platforms (efi, coreboot,
+ ieee1275, xen) and for x86_64 efi.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: Hans van Kranenburg <hans@knorrie.org>
+
+2018-12-12 Juergen Gross <jgross@suse.com>
+
+ xen: Add PVH specific defines to offset.h
+ include/grub/offsets.h needs some defines for Xen PVH mode.
+
+ Add them. While at it line up the values in the surrounding lines to
+ start at the same column.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: Hans van Kranenburg <hans@knorrie.org>
+
+2018-12-12 Juergen Gross <jgross@suse.com>
+
+ xen: Modify grub_xen_ptr2mfn() for Xen PVH
+ grub_xen_ptr2mfn() returns the machine frame number for a given pointer
+ value. For Xen-PVH guests this is just the PFN. Add the PVH specific
+ variant.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: Hans van Kranenburg <hans@knorrie.org>
+
+2018-12-12 Juergen Gross <jgross@suse.com>
+
+ xen: Rearrange xen/init.c to prepare it for Xen PVH mode
+ Rearrange grub-core/kern/xen/init.c to prepare adding PVH mode support
+ to it. This includes putting some code under #ifdef GRUB_MACHINE_XEN
+ as it will not be used when running as PVH.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: Hans van Kranenburg <hans@knorrie.org>
+
+2018-12-12 Juergen Gross <jgross@suse.com>
+
+ xen: Add some dummy headers for PVH mode
+ With Xen PVH mode adding a new machine type the machine related headers
+ need to be present for the build to succeed. Most of the headers just
+ need to include the related common i386 headers. Add those to the tree.
+
+ Note that xen_pvh/int.h needs to include pc/int_types.h instead of
+ pc/int.h in order to avoid the definition of grub_bios_interrupt().
+
+ xen_pvh/memory.h needs to include coreboot/memory.h (like some other
+ <machine>/memory.h do as well) as this contains just the needed stubs.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: Hans van Kranenburg <hans@knorrie.org>
+
+2018-12-12 Juergen Gross <jgross@suse.com>
+
+ xen: Prepare common code for Xen PVH support
+ Some common code needs to be special cased for Xen PVH mode. This hits
+ mostly Xen PV mode specific areas.
+
+ Split include/grub/i386/pc/int_types.h off from
+ include/grub/i386/pc/int.h to support including this file later from
+ xen_pvh code without the grub_bios_interrupt definition.
+
+ Move definition of struct grub_e820_mmap_entry from
+ grub-core/mmap/i386/pc/mmap.c to include/grub/i386/memory.h in order
+ to make it usable from xen_pvh code.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: Hans van Kranenburg <hans@knorrie.org>
+
+2018-12-12 Juergen Gross <jgross@suse.com>
+
+ xen: Carve out grant tab initialization into dedicated function
+ Initialize the grant tab in a dedicated function. This will enable
+ using it for PVH guests, too.
+
+ Call the new function from grub_machine_init() as this will later
+ be common between Xen PV and Xen PVH mode.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: Hans van Kranenburg <hans@knorrie.org>
+
+2018-12-12 Juergen Gross <jgross@suse.com>
+
+ loader/linux: Support passing RSDP address via boot params
+ Xen PVH guests will have the RSDP at an arbitrary address. Support that
+ by passing the RSDP address via the boot parameters to Linux.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: Hans van Kranenburg <hans@knorrie.org>
+
+2018-12-12 Juergen Gross <jgross@suse.com>
+
+ xen: Add some Xen headers
+ In order to support grub2 in Xen PVH environment some additional Xen
+ headers are needed as grub2 will be started in PVH mode requiring to
+ use several HVM hypercalls and structures.
+
+ Add the needed headers from Xen 4.10 being the first Xen version with
+ full (not only experimental) PVH guest support.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: Hans van Kranenburg <hans@knorrie.org>
+
+2018-12-07 Daniel Kiper <daniel.kiper@oracle.com>
+
+ verifiers: ARM Xen fallout cleanup
+ ARM Xen fallout cleanup after commit ca0a4f689 (verifiers: File type for
+ fine-grained signature-verification controlling).
+
+ Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
+
+2018-12-07 Daniel Kiper <daniel.kiper@oracle.com>
+
+ verifiers: Xen fallout cleanup
+ Xen fallout cleanup after commit ca0a4f689 (verifiers: File type for
+ fine-grained signature-verification controlling).
+
+ Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
+
+2018-11-28 Eric Snowberg <eric.snowberg@oracle.com>
+
+ ofnet: Fix build regression in grub_ieee1275_parse_bootpath()
+ The grub_ieee1275_parse_bootpath() function (commit a661a32, ofnet: Initialize
+ structs in bootpath parser) introduces a build regression on SPARC:
+
+ cc1: warnings being treated as errors
+ net/drivers/ieee1275/ofnet.c: In function 'grub_ieee1275_parse_bootpath':
+ net/drivers/ieee1275/ofnet.c:156: error: missing initializer
+ net/drivers/ieee1275/ofnet.c:156: error: (near initialization for 'client_addr.type')
+ net/drivers/ieee1275/ofnet.c:156: error: missing initializer
+ net/drivers/ieee1275/ofnet.c:156: error: (near initialization for 'gateway_addr.type')
+ net/drivers/ieee1275/ofnet.c:156: error: missing initializer
+ net/drivers/ieee1275/ofnet.c:156: error: (near initialization for 'subnet_mask.type')
+ net/drivers/ieee1275/ofnet.c:157: error: missing initializer
+ net/drivers/ieee1275/ofnet.c:157: error: (near initialization for 'hw_addr.type')
+ make[3]: *** [net/drivers/ieee1275/ofnet_module-ofnet.o] Error 1
+
+ Initialize the entire structure.
+
+ More info can be found here:
+ http://lists.gnu.org/archive/html/grub-devel/2018-03/msg00034.html
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-11-26 Nick Terrell <terrelln@fb.com>
+
+ btrfs: Add zstd support to grub btrfs
+ - Adds zstd support to the btrfs module.
+ - Adds a test case for btrfs zstd support.
+ - Changes top_srcdir to srcdir in the btrfs module's lzo include
+ following comments from Daniel Kiper about the zstd include.
+
+ Tested on Ubuntu-18.04 with a btrfs /boot partition with and without zstd
+ compression. A test case was also added to the test suite that fails before
+ the patch, and passes after.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-11-26 Nick Terrell <terrelln@fb.com>
+
+ zstd: Import upstream zstd-1.3.6
+ - Import zstd-1.3.6 from upstream
+ - Add zstd's module.c file
+ - Add the zstd module to Makefile.core.def
+
+ Import zstd-1.3.6 from upstream [1]. Only the files need for decompression
+ are imported. I used the latest zstd release, which includes patches [2] to
+ build cleanly in GRUB.
+
+ I included the script used to import zstd-1.3.6 below at the bottom of the
+ commit message.
+
+ Upstream zstd commit hash: 4fa456d7f12f8b27bd3b2f5dfd4f46898cb31c24
+ Upstream zstd commit name: Merge pull request #1354 from facebook/dev
+
+ Zstd requires some posix headers, which it gets from posix_wrap.
+ This can be checked by inspecting the .Po files generated by automake,
+ which contain the header dependencies. After building run the command
+ `cat grub-core/lib/zstd/.deps-core/*.Po` to see the dependencies [3].
+ The only OS dependencies are:
+
+ - stddef.h, which is already a dependency in posix_wrap, and used for size_t
+ by lzo and xz.
+ - stdarg.h, which comes from the grub/misc.h header, and we don't use in zstd.
+
+ All the types like uint64_t are typedefed to grub_uint64_t under the hood.
+ The only exception is size_t, which comes from stddef.h. This is already the
+ case for lzo and xz. I don't think there are any cross-compilation concerns,
+ because cross-compilers provide their own system headers (and it would already
+ be broken).
+
+ [1] https://github.com/facebook/zstd/releases/tag/v1.3.6
+ [2] https://github.com/facebook/zstd/pull/1344
+ [3] https://gist.github.com/terrelln/7a16b92f5a1b3aecf980f944b4a966c4
+
+ ```
+
+ curl -L -O https://github.com/facebook/zstd/releases/download/v1.3.6/zstd-1.3.6.tar.gz
+ curl -L -O https://github.com/facebook/zstd/releases/download/v1.3.6/zstd-1.3.6.tar.gz.sha256
+ sha256sum --check zstd-1.3.6.tar.gz.sha256
+ tar xzf zstd-1.3.6.tar.gz
+
+ SRC_LIB="zstd-1.3.6/lib"
+ DST_LIB="grub-core/lib/zstd"
+ rm -rf $DST_LIB
+ mkdir -p $DST_LIB
+ cp $SRC_LIB/zstd.h $DST_LIB/
+ cp $SRC_LIB/common/*.[hc] $DST_LIB/
+ cp $SRC_LIB/decompress/*.[hc] $DST_LIB/
+ rm $DST_LIB/{pool.[hc],threading.[hc]}
+ rm -rf zstd-1.3.6*
+ echo SUCCESS!
+ ```
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-11-21 Michael Chang <mchang@suse.com>
+
+ verifiers: fix double close on pgp's sig file descriptor
+ An error emerged as when I was testing the verifiers branch, so instead
+ of putting it in pgp prefix, the verifiers is used to reflect what the
+ patch is based on.
+
+ While running verify_detached, grub aborts with error.
+
+ verify_detached /@/.snapshots/1/snapshot/boot/grub/grub.cfg
+ /@/.snapshots/1/snapshot/boot/grub/grub.cfg.sig
+
+ alloc magic is broken at 0x7beea660: 0
+ Aborted. Press any key to exit.
+
+ The error is caused by sig file descriptor been closed twice, first time
+ in grub_verify_signature() to which it is passed as parameter. Second in
+ grub_cmd_verify_signature() or in whichever opens the sig file
+ descriptor. The second close is not consider as bug to me either, as in
+ common rule of what opens a file has to close it to avoid file
+ descriptor leakage.
+
+ After all the design of grub_verify_signature() makes it difficult to keep
+ a good trace on opened file descriptor from it's caller. Let's refine
+ the application interface to accept file path rather than descriptor, in
+ this way the caller doesn't have to care about closing the descriptor by
+ delegating it to grub_verify_signature() with full tracing to opened
+ file descriptor by itself.
+
+ Also making it clear that sig descriptor is not referenced in error
+ returning path of grub_verify_signature_init(), so it can be closed
+ directly by it's caller. This also makes delegating it to
+ grub_pubkey_close() infeasible to help in relieving file descriptor
+ leakage as it has to depend on uncertainty of ctxt fields in error
+ returning path.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-11-21 Lee Jones <lee.jones@linaro.org>
+
+ generic/blocklist: Fix implicit declaration of function grub_file_filter_disable_compression()
+ grub_file_filter_disable_compression() no longer exists.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-11-21 Lee Jones <lee.jones@linaro.org>
+
+ arm64/xen: Fix too few arguments to function grub_create_loader_cmdline()
+ Without this fix, building xen_boot.c omits:
+
+ loader/arm64/xen_boot.c: In function ‘xen_boot_binary_load’:
+ loader/arm64/xen_boot.c:370:7: error: too few arguments to function ‘grub_create_loader_cmdline’
+ grub_create_loader_cmdline (argc - 1, argv + 1, binary->cmdline,
+ ^~~~~~~~~~~~~~~~~~~~~~~~~~
+ In file included from loader/arm64/xen_boot.c:36:0:
+ ../include/grub/lib/cmdline.h:29:12: note: declared here
+ grub_err_t grub_create_loader_cmdline (int argc, char *argv[], char *buf,
+
+ Reviewed-by: Julien Grall <julien.grall@arm.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-11-16 Leif Lindholm <leif.lindholm@linaro.org>
+
+ arm-uboot, ia64, sparc64: Fix up grub_file_open() calls
+ The verifiers framework changed the grub_file_open() interface, breaking all
+ non-x86 linux loaders. Add file types to the grub_file_open() calls to make
+ them build again.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-11-16 Leif Lindholm <leif.lindholm@linaro.org>
+
+ arm64/efi: Fix breakage caused by verifiers
+ - add variable "err" (used but not defined),
+ - add GRUB_FILE_TYPE_LINUX_KERNEL to grub_file_open() call.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-11-16 Leif Lindholm <leif.lindholm@linaro.org>
+
+ grub-core/loader/efi/fdt.c: Fixup grub_file_open() call
+ The verifiers framework changed the API of grub_file_open(), but did not
+ fix up all users. Add the file type GRUB_FILE_TYPE_DEVICE_TREE_IMAGE
+ to the "devicetree" command handler call.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-11-16 Leif Lindholm <leif.lindholm@linaro.org>
+
+ include/grub/file.h: Add device tree file type
+ The API change of grub_file_open() for adding verifiers did not include
+ a type for device tree blobs. Add GRUB_FILE_TYPE_DEVICE_TREE_IMAGE to
+ the grub_file_type enum.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-11-16 Leif Lindholm <leif.lindholm@linaro.org>
+
+ include/grub/verify.h: Add include guard
+ verify.h was added without include guards. This means compiling anything
+ including both include/grub/verify.h and include/grub/lib/cmdline.h fails
+ (at least grub-core/loader/arm64/linux.c.
+
+ Add the necessary include guard.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-11-16 Matthew Daley <mattd@bugfuzz.com>
+
+ mkimage: Pad DTBs to target-specific pointer size
+ Device tree (DTB) lengths are being padded to a multiple of 4 bytes
+ rather than the target-specific pointer size. This causes objects
+ following OBJ_TYPE_DTB objects to be incorrectly parsed during GRUB
+ execution on arm64.
+
+ Fix by using ALIGN_ADDR(), not ALIGN_UP().
+
+ Signed-by-off: Matthew Daley <mattd@bugfuzz.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-11-09 Colin Watson <cjwatson@ubuntu.com>
+
+ Cope with / being on a ZFS root dataset
+ If / is on the root dataset in a ZFS pool, then ${bootfs} will be set to
+ "/" (whereas if it is on a non-root dataset, there will be no trailing
+ slash). Passing "root=ZFS=${rpool}/" will fail to boot, but
+ "root=ZFS=${rpool}" works fine, so strip the trailing slash.
+
+ Fixes: https://savannah.gnu.org/bugs/?52746
+
+ Tested-by: Fejes József <jozsef.fejes@gmail.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-11-09 Paul Menzel <pmenzel@molgen.mpg.de>
+
+ unix/platform: Initialize variable to fix grub-install on UEFI system
+ On a UEFI system, were no boot entry *grub* is present, currently,
+ `grub-install` fails with an error.
+
+ $ efibootmgr
+ BootCurrent: 0000
+ Timeout: 0 seconds
+ BootOrder: 0001,0006,0003,0004,0005
+ Boot0001 Diskette Drive
+ Boot0003* USB Storage Device
+ Boot0004* CD/DVD/CD-RW Drive
+ Boot0005 Onboard NIC
+ Boot0006* WDC WD2500AAKX-75U6AA0
+ $ sudo grub-install /dev/sda
+ Installing for x86_64-efi platform.
+ grub-install: error: efibootmgr failed to register the boot entry: Unknown error 22020.
+
+ The error code is always different, and the error message (incorrectly)
+ points to efibootmgr.
+
+ But, the error is in GRUB’s function
+ `grub_install_remove_efi_entries_by_distributor()`, where the variable
+ `rc` for the return value, is uninitialized and never set, when no boot
+ entry for the distributor is found.
+
+ The content of that uninitialized variable is then returned as the error
+ code of efibootmgr.
+
+ Set the variable to 0, so that success is returned, when no entry needs
+ to be deleted.
+
+ Tested on Dell OptiPlex 7010 with firmware A28.
+
+ $ sudo ./grub-install /dev/sda
+ Installing for x86_64-efi platform.
+ Installation finished. No error reported.
+
+ [1]: https://github.com/rhboot/efibootmgr/issues/100
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-11-09 Daniel Kiper <daniel.kiper@oracle.com>
+
+ efi: Add EFI shim lock verifier
+ This module provides shim lock verification for various kernels
+ if UEFI secure boot is enabled on a machine.
+
+ It is recommended to put this module into GRUB2 standalone image
+ (avoid putting iorw and memrw modules into it; they are disallowed
+ if UEFI secure boot is enabled). However, it is also possible to use
+ it as a normal module. Though such configurations are more fragile
+ and less secure due to various limitations.
+
+ If the module is loaded and UEFI secure boot is enabled then:
+ - module itself cannot be unloaded (persistent module),
+ - the iorw and memrw modules cannot be loaded,
+ - if the iorw and memrw modules are loaded then
+ machine boot is disabled,
+ - GRUB2 defers modules and ACPI tables verification to
+ other verifiers.
+
+ Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
+
+2018-11-09 Daniel Kiper <daniel.kiper@oracle.com>
+
+ dl: Add support for persistent modules
+ This type of modules cannot be unloaded. This is useful if a given
+ functionality, e.g. UEFI secure boot shim signature verification, should
+ not be disabled if it was enabled at some point in time. Somebody may
+ say that we can use standalone GRUB2 here. That is true. However, the
+ code is not so big nor complicated hence it make sense to support
+ modularized configs too.
+
+ Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
+
+2018-11-09 Vladimir Serbinenko <phcoder@gmail.com>
+
+ verifiers: Add the documentation
+ Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
+
+2018-11-09 Daniel Kiper <daniel.kiper@oracle.com>
+
+ verifiers: Rename verify module to pgp module
+ Just for clarity. No functional change.
+
+ Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
+
+2018-11-09 Daniel Kiper <daniel.kiper@oracle.com>
+
+ verifiers: Add possibility to defer verification to other verifiers
+ This way if a verifier requires verification of a given file it can defer task
+ to another verifier (another authority) if it is not able to do it itself. E.g.
+ shim_lock verifier, posted as a subsequent patch, is able to verify only PE
+ files. This means that it is not able to verify any of GRUB2 modules which have
+ to be trusted on UEFI systems with secure boot enabled. So, it can defer
+ verification to other verifier, e.g. PGP one.
+
+ I silently assume that other verifiers are trusted and will do good job for us.
+ Or at least they will not do any harm.
+
+ Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
+
+2018-11-09 Vladimir Serbinenko <phcoder@gmail.com>
+
+ verifiers: Add possibility to verify kernel and modules command lines
+ Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
+
+2018-11-09 Vladimir Serbinenko <phcoder@gmail.com>
+
+ verifiers: Framework core
+ Verifiers framework provides core file verification functionality which
+ can be used by various security mechanisms, e.g., UEFI secure boot, TPM,
+ PGP signature verification, etc.
+
+ The patch contains PGP code changes and probably they should be extracted
+ to separate patch for the sake of clarity.
+
+ Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
+
+2018-11-09 Vladimir Serbinenko <phcoder@gmail.com>
+
+ verifiers: File type for fine-grained signature-verification controlling
+ Let's provide file type info to the I/O layer. This way verifiers
+ framework and its users will be able to differentiate files and verify
+ only required ones.
+
+ This is preparatory patch.
+
+ Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
+
+2018-11-09 Daniel Kiper <daniel.kiper@oracle.com>
+
+ bufio: Use grub_size_t instead of plain int for size
+ Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
+
+2018-10-31 Goffredo Baroncelli <kreijack@inwind.it>
+
+ btrfs: Add RAID 6 recovery for a btrfs filesystem
+ Add the RAID 6 recovery, in order to use a RAID 6 filesystem even if some
+ disks (up to two) are missing. This code use the md RAID 6 code already
+ present in grub.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-10-31 Goffredo Baroncelli <kreijack@inwind.it>
+
+ btrfs: Make more generic the code for RAID 6 rebuilding
+ The original code which handles the recovery of a RAID 6 disks array
+ assumes that all reads are multiple of 1 << GRUB_DISK_SECTOR_BITS and it
+ assumes that all the I/O is done via the struct grub_diskfilter_segment.
+ This is not true for the btrfs code. In order to reuse the native
+ grub_raid6_recover() code, it is modified to not call
+ grub_diskfilter_read_node() directly, but to call an handler passed
+ as an argument.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-10-31 Goffredo Baroncelli <kreijack@inwind.it>
+
+ btrfs: Add support for recovery for a RAID 5 btrfs profiles
+ Add support for recovery for a RAID 5 btrfs profile. In addition
+ it is added some code as preparatory work for RAID 6 recovery code.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-10-31 Goffredo Baroncelli <kreijack@inwind.it>
+
+ btrfs: Refactor the code that read from disk
+ Move the code in charge to read the data from disk into a separate
+ function. This helps to separate the error handling logic (which
+ depends on the different raid profiles) from the read from disk
+ logic. Refactoring this code increases the general readability too.
+
+ This is a preparatory patch, to help the adding of the RAID 5/6 recovery code.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-10-31 Goffredo Baroncelli <kreijack@inwind.it>
+
+ btrfs: Move logging code in grub_btrfs_read_logical()
+ A portion of the logging code is moved outside of internal for(;;). The part
+ that is left inside is the one which depends on the internal for(;;) index.
+
+ This is a preparatory patch. The next one will refactor the code inside
+ the for(;;) into an another function.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-10-31 Goffredo Baroncelli <kreijack@inwind.it>
+
+ btrfs: Avoid a rescan for a device which was already not found
+ Currently read from missing device triggers rescan. However, it is never
+ recorded that the device is missing. So, each read of a missing device
+ triggers rescan again and again. This behavior causes a lot of unneeded
+ rescans leading to huge slowdowns.
+
+ This patch fixes above mentioned issue. Information about missing devices
+ is stored in the data->devices_attached[] array as NULL value in dev
+ member. Rescan is triggered only if no information is found for a given
+ device. This means that only first time read triggers rescan.
+
+ The patch drops premature return. This way data->devices_attached[] is
+ filled even when a given device is missing.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-10-31 Goffredo Baroncelli <kreijack@inwind.it>
+
+ btrfs: Move the error logging from find_device() to its caller
+ The caller knows better if this error is fatal or not, i.e. another disk is
+ available or not.
+
+ This is a preparatory patch.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-10-31 Goffredo Baroncelli <kreijack@inwind.it>
+
+ btrfs: Add helper to check the btrfs header
+ This helper is used in a few places to help the debugging. As
+ conservative approach the error is only logged.
+ This does not impact the error handling.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-10-31 Goffredo Baroncelli <kreijack@inwind.it>
+
+ btrfs: Add support for reading a filesystem with a RAID 5 or RAID 6 profile
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-09-27 Michael Chang <mchang@suse.com>
+
+ msdos: Fix overflow in converting partition start and length into 512B blocks
+ When booting from NVME SSD with 4k sector size, it fails with the message.
+
+ error: attempt to read or write outside of partition.
+
+ This patch fixes the problem by fixing overflow in converting partition start
+ and length into 512B blocks.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-09-27 Mihai Moldovan <ionic@ionic.de>
+
+ osdep/linux: Convert partition start to disk sector length
+ When reading data off a disk, sector values are based on the disk sector
+ length.
+
+ Within grub_util_fd_open_device(), the start of the partition was taken
+ directly from grub's partition information structure, which uses the
+ internal sector length (currently 512b), but never transformed to the
+ disk's sector length.
+
+ Subsequent calculations were all wrong for devices that have a diverging
+ sector length and the functions eventually skipped to the wrong stream
+ location, reading invalid data.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-09-27 Adam Williamson <awilliam@redhat.com>
+
+ python: Use AM_PATH_PYTHON to determine interpreter for gentpl.py
+ gentpl.py is python2/3-agnostic, but there's no way to cause it
+ to be run with any interpreter other than 'python', it's just
+ hard-coded into Makefile.common that way. Adjust that to use
+ AM_PATH_PYTHON (provided by automake) to find an interpreter
+ and run gentpl.py with that instead. This makes grub buildable
+ when `python` does not exist (but rather `python3` or `python2`
+ or `python2.7`, etc.) Minimum version is set to 2.6 as this is
+ the first version with `__future__.print_function` available.
+
+ Note, AM_PATH_PYTHON respects the PYTHON environment variable
+ and will treat its value as the *only* candidate for a valid
+ interpreter if it is set - when PYTHON is set, AM_PATH_PYTHON
+ will not try to find any alternative interpreter, it will only
+ check whether the interpreter set as the value of PYTHON meets
+ the requirements and use it if so or fail if not. This means
+ that when using grub's `autogen.sh`, as it too uses the value
+ of the PYTHON environment variable (and if it is not set, just
+ sets it to 'python') you cannot rely on AM_PATH_PYTHON
+ interpreter discovery. If your desired Python interpreter is
+ not just 'python', you must set the PYTHON environment variable,
+ e.g. 'PYTHON=/usr/local/bin/python3 ./autogen.sh'. The specified
+ interpreter will then be used both by autogen.sh itself and by
+ the autotools-driven build scripts.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-09-27 Colin Watson <cjwatson@ubuntu.com>
+
+ build: Use pkg-config to find FreeType
+ pkg-config is apparently preferred over freetype-config these days (see
+ the BUGS section of freetype-config(1)). pkg-config support was added
+ to FreeType in version 2.1.5, which was released in 2003, so it should
+ comfortably be available everywhere by now.
+
+ We no longer need to explicitly substitute FREETYPE_CFLAGS and
+ FREETYPE_LIBS, since PKG_CHECK_MODULES does that automatically.
+
+ Fixes Debian bug #887721.
+
+ Reported-by: Hugh McMaster <hugh.mcmaster@outlook.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-09-27 Colin Watson <cjwatson@ubuntu.com>
+
+ build: Capitalise *freetype_* variables
+ Using FREETYPE_CFLAGS and FREETYPE_LIBS is more in line with the naming
+ scheme used by pkg-config macros.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-09-13 Julian Andres Klode <julian.klode@canonical.com>
+
+ ofnet: Initialize structs in bootpath parser
+ Code later on checks if variables inside the struct are
+ 0 to see if they have been set, like if there were addresses
+ in the bootpath.
+
+ The variables were not initialized however, so the check
+ might succeed with uninitialized data, and a new interface
+ with random addresses and the same name is added. This causes
+ $net_default_mac to point to the random one, so, for example,
+ using that variable to load per-mac config files fails.
+
+ Bug-Ubuntu: https://bugs.launchpad.net/bugs/1785859
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-09-13 dann frazier <dann.frazier@canonical.com>
+
+ grub-reboot: Warn when "for the next boot only" promise cannot be kept
+ The "for the next boot only" property of grub-reboot is dependent upon
+ GRUB being able to clear the next_entry variable in the environment
+ block. However, GRUB cannot write to devices using the diskfilter
+ and lvm abstractions.
+
+ Ref: https://lists.gnu.org/archive/html/grub-devel/2009-12/msg00276.html
+ Ref: https://bugs.launchpad.net/bugs/788298
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-09-13 Cao jin <caoj.fnst@cn.fujitsu.com>
+
+ relocator16: Comments update
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-09-13 Paul Menzel <pmenzel@molgen.mpg.de>
+
+ ahci: Increase time-out from 10 s to 32 s
+ This is a cryptographically signed message in MIME format.
+
+ Date: Thu, 9 Aug 2018 07:27:35 +0200
+
+ Currently, the GRUB payload for coreboot does not detect the Western
+ Digital hard disk WDC WD20EARS-60M AB51 connected to the ASRock E350M1,
+ as that takes over ten seconds to spin up.
+
+ ```
+ disk/ahci.c:533: port 0, err: 0
+ disk/ahci.c:539: port 0, err: 0
+ disk/ahci.c:543: port 0, err: 0
+ disk/ahci.c:549: port 0, offset: 120, tfd:80, CMD: 6016
+ disk/ahci.c:552: port 0, err: 0
+ disk/ahci.c:563: port 0, offset: 120, tfd:80, CMD: 6016
+ disk/ahci.c:566: port: 0, err: 0
+ disk/ahci.c:593: port 0 is busy
+ disk/ahci.c:621: cleaning up failed devs
+ ```
+
+ GRUB detects the drive, when either unloading the module *ahci*, and
+ then loading it again, or when doing a warm reset.
+
+ As the ten second time-out is too short, increase it to 32 seconds,
+ used by SeaBIOS. which detects the drive successfully.
+
+ The AHCI driver in libpayload uses 30 seconds, and that time-out was
+ added in commit 354066e1 (libpayload: ahci: Increase timeout for
+ signature reading) with the description below.
+
+ > We can't read the drives signature before it's ready, i.e. spun up.
+ > So set the timeout to the standard 30s. Also put a notice on the
+ > console, so the user knows why the signature reading failed.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-09-13 Cao jin <caoj.fnst@cn.fujitsu.com>
+
+ linux16: Code cleanup
+ 1. move relocator related code more close to each other
+ 2. use variable "len" since it has correct assignment, and keep coding
+ style with upper code
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-09-13 Colin Watson <cjwatson@ubuntu.com>
+
+ tests: Fix qemu options for UHCI test
+ qemu 2.12 removed the -usbdevice option. Use a more modern spelling
+ instead, in line with other USB-related tests.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-09-13 Colin Watson <cjwatson@ubuntu.com>
+
+ tests: Disable sercon in SeaBIOS
+ SeaBIOS 1.11.0 added support for VGA emulation over a serial port, which
+ interferes with grub-shell. Turn it off.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-09-12 Peter Jones <pjones@redhat.com>
+
+ grub-module-verifier: Report the filename or modname in errors
+ Make it so that when grub-module-verifier complains of an issue, it tells you
+ which module the issue was with.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-09-12 Peter Jones <pjones@redhat.com>
+
+ configure: Fix an 8 year old typo
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-09-12 Leif Lindholm <leif.lindholm@linaro.org>
+
+ loader/multiboot_mbi2: Use central copy of grub_efi_find_mmap_size()
+ Delete local copy of function to determine required buffer size for the
+ UEFI memory map, use helper in kern/efi/mm.c.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-09-12 Leif Lindholm <leif.lindholm@linaro.org>
+
+ loader/ia64/linux: Use central copy of grub_efi_find_mmap_size()
+ Delete local copy of function to determine required buffer size for the
+ UEFI memory map, use helper in kern/efi/mm.c.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-09-12 Leif Lindholm <leif.lindholm@linaro.org>
+
+ loader/i386/linux: Use central copy of grub_efi_find_mmap_size()
+ Delete local copy of function to determine required buffer size for the
+ UEFI memory map, use helper in kern/efi/mm.c.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-07-25 Leif Lindholm <leif.lindholm@linaro.org>
+
+ i386: Don't include lib/i386/reset.c in EFI builds
+ Commit 0ba90a7f0178 ("efi: Move grub_reboot() into kernel") broke
+ the build on i386-efi - genmoddep.awk bails out with message
+ grub_reboot in reboot is duplicated in kernel
+ This is because both lib/i386/reset.c and kern/efi/efi.c now provide
+ this function.
+
+ Rather than explicitly list each i386 platform variant in
+ Makefile.core.def, include the contents of lib/i386/reset.c only when
+ GRUB_MACHINE_EFI is not set.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-07-25 Leif Lindholm <leif.lindholm@linaro.org>
+
+ efi: Restrict arm/arm64 linux loader initrd placement
+ The 32-bit arm Linux kernel is built as a zImage, which self-decompresses
+ down to near start of RAM. In order for an initrd/initramfs to be
+ accessible, it needs to be placed within the first ~768MB of RAM.
+ The initrd loader built into the kernel EFI stub restricts this down to
+ 512MB for simplicity - so enable the same restriction in grub.
+
+ For arm64, the requirement is within a 1GB aligned 32GB window also
+ covering the (runtime) kernel image. Since the EFI stub loader itself
+ will attempt to relocate to near start of RAM, force initrd to be loaded
+ completely within the first 32GB of RAM.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-07-25 Leif Lindholm <leif.lindholm@linaro.org>
+
+ arm: Delete unused efi support from loader/arm
+ The 32-bit arm efi port now shares the 64-bit linux loader, so delete
+ the now unused bits from the 32-bit linux loader.
+
+ This in turn leaves the grub-core/kern/arm/efi/misc.c unused, so
+ delete that too.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-07-25 Leif Lindholm <leif.lindholm@linaro.org>
+
+ arm/efi: Switch to arm64 linux loader
+ The arm64 and arm linux kernel EFI-stub support presents pretty much
+ identical interfaces, so the same linux loader source can be used for
+ both architectures.
+
+ Switch 32-bit ARM UEFI platforms over to the existing EFI-stub aware
+ loader initially developed for arm64.
+
+ This *WILL* stop non-efistub Linux kernels from booting on arm-efi.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-07-25 Leif Lindholm <leif.lindholm@linaro.org>
+
+ arm64/linux/loader: Rename functions and macros and move to common headers
+ In preparation for using the linux loader for 32-bit and 64-bit platforms,
+ rename grub_arm64*/GRUB_ARM64* to grub_armxx*/GRUB_ARMXX*.
+
+ Move prototypes for now-common functions to efi/efi.h.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-07-25 Leif Lindholm <leif.lindholm@linaro.org>
+
+ efi: Add grub_efi_get_ram_base() function for arm64
+ Since ARM platforms do not have a common memory map, add a helper
+ function that finds the lowest address region with the EFI_MEMORY_WB
+ attribute set in the UEFI memory map.
+
+ Required for the arm64 efi linux loader to restrict the initrd
+ location to where it will be accessible by the kernel at runtime.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-07-25 Leif Lindholm <leif.lindholm@linaro.org>
+
+ efi: Add central copy of grub_efi_find_mmap_size
+ There are several implementations of this function in the tree.
+ Add a central version in grub-core/efi/mm.c.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-07-25 Arindam Nath <arindam.nath@amd.com>
+
+ i386/linux: Add support for ext_lfb_base
+ The EFI Graphics Output Protocol can return a 64-bit
+ linear frame buffer address in some firmware/BIOS
+ implementations. We currently only store the lower
+ 32-bits in the lfb_base. This will eventually be
+ passed to Linux kernel and the efifb driver will
+ incorrectly interpret the framebuffer address as
+ 32-bit address.
+
+ The Linux kernel has already added support to handle
+ 64-bit linear framebuffer address in the efifb driver
+ since quite some time now.
+
+ This patch adds the support for 64-bit linear frame
+ buffer address in GRUB to address the above mentioned
+ scenario.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-07-11 Leif Lindholm <leif.lindholm@linaro.org>
+
+ commands/file: Use definitions from arm64/linux.h
+ Clean up code for matching IS_ARM64 slightly by making use of struct
+ linux_arm64_kernel_header and GRUB_LINUX_ARM64_MAGIC_SIGNATURE.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-07-11 Leif Lindholm <leif.lindholm@linaro.org>
+
+ commands/file: Use definitions from arm/linux.h
+ Clean up code for matching IS_ARM slightly by making use of struct
+ linux_arm_kernel_header and GRUB_LINUX_ARM_MAGIC_SIGNATURE.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-07-11 Hans de Goede <hdegoede@redhat.com>
+
+ efi/console: Fix the "enter" key not working on x86 tablets
+ Most 8" or 7" x86 Windows 10 tablets come with volume up/down buttons and
+ a power-button. In their UEFI these are almost always mapped to arrow
+ up/down and enter.
+
+ Pressing the volume buttons (sometimes by accident) will stop the
+ menu countdown, but the power-button / "enter" key was not being recognized
+ as enter, so the user would be stuck at the grub menu.
+
+ The problem is that these tablets send scan_code 13 or 0x0d for the
+ power-button, which officialy maps to the F3 key. They also set
+ unicode_char to 0x0d.
+
+ This commit recognizes the special case of both scan_code and unicode_char
+ being set to 0x0d and treats this as an enter key press.
+
+ This fixes things getting stuck at the grub-menu and allows the user
+ to choice a grub-menu entry using the buttons on the tablet.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-07-11 Cao jin <caoj.fnst@cn.fujitsu.com>
+
+ grub-setup: Debug message cleanup
+ Variable "root" is initialized after root device probing and is null in
+ current place, so, drop it.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-07-02 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
+
+ multiboot_elfxx.c: Fix compilation by fixing undeclared variable
+ Without that fix we have:
+ In file included from ../../include/grub/command.h:25:0,
+ from ../../grub-core/loader/multiboot.c:30:
+ ../../grub-core/loader/multiboot_elfxx.c: In function 'grub_multiboot_load_elf64':
+ ../../grub-core/loader/multiboot_elfxx.c:130:28: error: 'relocatable' undeclared (first use in this function)
+ "load_base_addr=0x%x\n", relocatable,
+
+ This happens due to mistake in the commit 14ec665
+ (mbi: Use per segment a separate relocator chunk).
+
+ So, let's fix it.
+
+2018-06-23 Leif Lindholm <leif.lindholm@linaro.org>
+
+ efi/fdt: Set address/size cells to 2 for empty tree
+ When booting an arm* system on UEFI with an empty device tree (currently
+ only when hardware description comes from ACPI), we don't currently set
+ default to 1 cell (32 bits).
+
+ Set both of these properties, to 2 cells (64 bits), to resolve issues
+ with kexec on some platforms.
+
+ This change corresponds with linux kernel commit ae8a442dfdc4
+ ("efi/libstub/arm*: Set default address and size cells values for an empty dtb")
+ and ensures booting through grub does not behave differently from booting
+ the stub loader directly.
+
+ See also https://patchwork.kernel.org/patch/9561201/
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-06-23 Leif Lindholm <leif.lindholm@linaro.org>
+
+ fdt: Move prop_entry_size to fdt.h
+ To be able to resuse the prop_entry_size macro, move it to
+ <grub/fdt.h> and rename it grub_fdt_prop_entry_size.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-06-23 Will Thompson <wjt@endlessm.com>
+
+ grub-fs-tester: Fix losetup race
+ If something else on the system is using loopback devices, then the
+ device that's free at the call to `losetup -f` may not be free in the
+ following call to try to use it. Instead, find and use the first free
+ loopback device in a single call to losetup.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-06-23 Alexander Boettcher <alexander.boettcher@genode-labs.com>
+
+ mbi: Use per segment a separate relocator chunk
+ Instead of setting up a all comprising relocator chunk for all segments,
+ use per segment a separate relocator chunk.
+
+ Currently, if the ELF is non-relocatable, a single relocator chunk will
+ comprise memory (between the segments) which gets overridden by the relst()
+ invocation of the movers code in grub_relocator16/32/64_boot().
+
+ The overridden memory may contain reserved ranges like VGA memory or ACPI
+ tables, which may lead to crashes or at least to strange boot behaviour.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-06-05 Daniel Kiper <daniel.kiper@oracle.com>
+
+ templates: Add missing "]"
+ Commit 51be337 (templates: Update grub script template files)
+ lacked one "]", so, add it.
+
+ Reported-by: Philip <philm@manjaro.org>
+
+2018-05-29 Daniel Kiper <daniel.kiper@oracle.com>
+
+ xfs: Accept filesystem with sparse inodes
+ The sparse inode metadata format became a mkfs.xfs default in
+ xfsprogs-4.16.0, and such filesystems are now rejected by grub as
+ containing an incompatible feature.
+
+ In essence, this feature allows xfs to allocate inodes into fragmented
+ freespace. (Without this feature, if xfs could not allocate contiguous
+ space for 64 new inodes, inode creation would fail.)
+
+ In practice, the disk format change is restricted to the inode btree,
+ which as far as I can tell is not used by grub. If all you're doing
+ today is parsing a directory, reading an inode number, and converting
+ that inode number to a disk location, then ignoring this feature
+ should be fine, so I've added it to XFS_SB_FEAT_INCOMPAT_SUPPORTED
+
+ I did some brief testing of this patch by hacking up the regression
+ tests to completely fragment freespace on the test xfs filesystem, and
+ then write a large-ish number of inodes to consume any existing
+ contiguous 64-inode chunk. This way any files the grub tests add and
+ traverse would be in such a fragmented inode allocation. Tests passed,
+ but I'm not sure how to cleanly integrate that into the test harness.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+ Tested-by: Chris Murphy <lists@colorremedies.com>
+
+2018-05-29 Oleg Solovyov <mcpain@altlinux.org>
+
+ grub-probe: Don't skip /dev/mapper/dm-* devices
+ This patch ensures that grub-probe will find the root device placed in
+ /dev/mapper/dm-[0-9]+-.* e.g. device named /dev/mapper/dm-0-luks will be
+ found and grub.cfg will be updated properly, enabling the system to boot.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-05-08 Michael Chang <mchang@suse.com>
+
+ bufio: Round up block size to power of 2
+ Rounding up the bufio->block_size to meet power of 2 to facilitate next_buf
+ calculation in grub_bufio_read().
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-04-23 Nicholas Vinson <nvinson234@gmail.com>
+
+ templates: Update grub script template files
+ Update grub-mkconfig.in and 10_linux.in to support grub-probe's new
+ partuuid target. Update grub.texi documentation. The following table
+ shows how GRUB_DISABLE_LINUX_UUID, GRUB_DISABLE_LINUX_PARTUUID, and
+ initramfs detection interact:
+
+ Initramfs GRUB_DISABLE_LINUX_PARTUUID GRUB_DISABLE_LINUX_UUID Linux Root
+ detected Set Set ID Method
+
+ false false false part UUID
+ false false true part UUID
+ false true false dev name
+ false true true dev name
+ true false false fs UUID
+ true false true part UUID
+ true true false fs UUID
+ true true true dev name
+
+ Note: GRUB_DISABLE_LINUX_PARTUUID and GRUB_DISABLE_LINUX_UUID equate to
+ 'false' when unset or set to any value other than 'true'.
+ GRUB_DISABLE_LINUX_PARTUUID defaults to 'true'.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-04-23 Nicholas Vinson <nvinson234@gmail.com>
+
+ grub-probe: Add PARTUUID detection support
+ Add PARTUUID detection support grub-probe for MBR and GPT partition schemes.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-04-23 Nicholas Vinson <nvinson234@gmail.com>
+
+ disk: Update grub_gpt_partentry
+ Rename grub_gpt_part_type to grub_gpt_part_guid and update grub_gpt_partentry
+ to use this type for both the partition type GUID string and the partition GUID
+ string entries. This change ensures that the two GUID fields are handled more
+ consistently and helps to simplify the changes needed to add Linux partition
+ GUID support.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-04-23 Nicholas Vinson <nvinson234@gmail.com>
+
+ grub-probe: Centralize GUID prints
+ Define print_gpt_guid(), so there is a central function for printing
+ GUID strings. This change is a precursor for later patches which rely
+ on this logic.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-04-23 Olaf Hering <olaf@aepfle.de>
+
+ grub-install: Locale depends on nls
+ With --disable-nls no locales exist.
+
+ Avoid runtime error by moving code that copies locales into its own
+ function. Return early in case nls was disabled. That way the compiler
+ will throw away unreachable code, no need to put preprocessor
+ conditionals everywhere to avoid warnings about unused code.
+
+ Fix memleak by freeing srcf and dstf.
+ Convert tabs to spaces in moved code.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-04-23 Cao jin <caoj.fnst@cn.fujitsu.com>
+
+ diskboot: Trivial correction on stale comments
+ diskboot.img now is loaded at 0x8000 and is jumped to with 0:0x8000.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-04-10 Jaegeuk Kim <jaegeuk@kernel.org>
+
+ fs: Add F2FS support
+ "F2FS (Flash-Friendly File System) is flash-friendly file system which was merged
+ into Linux kernel v3.8 in 2013.
+
+ The motive for F2FS was to build a file system that from the start, takes into
+ account the characteristics of NAND flash memory-based storage devices (such as
+ solid-state disks, eMMC, and SD cards).
+
+ F2FS was designed on a basis of a log-structured file system approach, which
+ remedies some known issues of the older log structured file systems, such as
+ the snowball effect of wandering trees and high cleaning overhead. In addition,
+ since a NAND-based storage device shows different characteristics according to
+ its internal geometry or flash memory management scheme (such as the Flash
+ Translation Layer or FTL), it supports various parameters not only for
+ configuring on-disk layout, but also for selecting allocation and cleaning
+ algorithm.", quote by https://en.wikipedia.org/wiki/F2FS.
+
+ The source codes for F2FS are available from:
+
+ http://git.kernel.org/cgit/linux/kernel/git/jaegeuk/f2fs.git
+ http://git.kernel.org/cgit/linux/kernel/git/jaegeuk/f2fs-tools.git
+
+ This patch has been integrated in OpenMandriva Lx 3.
+ https://www.openmandriva.org/
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-04-04 Michael Chang <mchang@suse.com>
+
+ Fix packed-not-aligned error on GCC 8
+ When building with GCC 8, there are several errors regarding packed-not-aligned.
+
+ ./include/grub/gpt_partition.h:79:1: error: alignment 1 of ‘struct grub_gpt_partentry’ is less than 8 [-Werror=packed-not-aligned]
+
+ This patch fixes the build error by cleaning up the ambiguity of placing
+ aligned structure in a packed one. In "struct grub_btrfs_time" and "struct
+ grub_gpt_part_type", the aligned attribute seems to be superfluous, and also
+ has to be packed, to ensure the structure is bit-to-bit mapped to the format
+ laid on disk. I think we could blame to copy and paste error here for the
+ mistake. In "struct efi_variable", we have to use grub_efi_packed_guid_t, as
+ the name suggests. :)
+
+ Tested-by: Michael Chang <mchang@suse.com>
+ Tested-by: Paul Menzel <paulepanter@users.sourceforge.net>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-04-04 mike.travis@hpe.com <mike.travis@hpe.com>
+
+ efi/uga: Fix PCIe LER when GRUB2 accesses non-enabled MMIO data from VGA
+ A GPU inserted into a PCIe I/O slot disappears during system startup.
+ The problem centers around GRUB and a specific VGA init function in
+ efi_uga.c. This causes an LER (Link Error Recorvery) because the MMIO
+ memory has not been enabled before attempting access.
+
+ The fix is to add the same coding used in other VGA drivers, specifically
+ to add a check to insure that it is indeed a VGA controller. And then
+ enable the MMIO address space with the specific bits.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-03-26 Eric Snowberg <eric.snowberg@oracle.com>
+
+ ieee1275: NULL pointer dereference in grub_machine_get_bootlocation()
+ Read from NULL pointer canon in function grub_machine_get_bootlocation().
+ Function grub_ieee1275_canonicalise_devname() may return NULL.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-03-14 Eric Snowberg <eric.snowberg@oracle.com>
+
+ ieee1275: split up grub_machine_get_bootlocation
+ Split up some of the functionality in grub_machine_get_bootlocation into
+ grub_ieee1275_get_boot_dev. This will allow for code reuse in a follow on
+ patch.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-03-14 C. Masloch <pushbx@38.de>
+
+ chainloader: patch in BPB's sectors_per_track and num_heads
+ These fields must reflect the ROM-BIOS's geometry for CHS-based
+ loaders to correctly load their next stage. Most loaders do not
+ query the ROM-BIOS (Int13.08), relying on the BPB fields to hold
+ the correct values already.
+
+ Tested with lDebug booted in qemu via grub2's
+ FreeDOS direct loading support, refer to
+ https://bitbucket.org/ecm/ldosboot + https://bitbucket.org/ecm/ldebug
+ (For this test, lDebug's iniload.asm must be assembled with
+ -D_QUERY_GEOMETRY=0 to leave the BPB values provided by grub.)
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-03-14 Matthew S. Turnbull <sparky@bluefang-logic.com>
+
+ grub-mkconfig/10_linux: Support multiple early initrd images
+ Add support for multiple, shared, early initrd images. These early
+ images will be loaded in the order declared, and all will be loaded
+ before the initrd image.
+
+ While many classes of data can be provided by early images, the
+ immediate use case would be for distributions to provide CPU
+ microcode to mitigate the Meltdown and Spectre vulnerabilities.
+
+ There are two environment variables provided for declaring the early
+ images.
+
+ * GRUB_EARLY_INITRD_LINUX_STOCK is for the distribution declare
+ images that are provided by the distribution or installed packages.
+ If undeclared, this will default to a set of common microcode image
+ names.
+
+ * GRUB_EARLY_INITRD_LINUX_CUSTOM is for user created images. User
+ images will be loaded after the stock images.
+
+ These separate configurations allow the distribution and user to
+ declare different image sets without clobbering each other.
+
+ This also makes a minor update to ensure that UUID partition labels
+ stay disabled when no initrd image is found, even if early images are
+ present.
+
+ This is a continuation of a previous patch published by Christian
+ Hesse in 2016:
+ http://lists.gnu.org/archive/html/grub-devel/2016-02/msg00025.html
+
+ Down stream Gentoo bug:
+ https://bugs.gentoo.org/645088
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-03-07 Eric Snowberg <eric.snowberg@oracle.com>
+
+ mkimage: fix build regression in grub_mkimage_load_image
+ The grub_mkimage_load_image function (commit 7542af6, mkimage: refactor a bunch
+ of section data into a struct.) introduces a build regression on SPARC:
+
+ cc1: warnings being treated as errors
+ In file included from util/grub-mkimage32.c:23:
+ util/grub-mkimagexx.c: In function 'grub_mkimage_load_image32':
+ util/grub-mkimagexx.c:1968: error: missing initializer
+ util/grub-mkimagexx.c:1968: error: (near initialization for 'smd.sections')
+ make[2]: *** [util/grub_mkimage-grub-mkimage32.o] Error 1
+
+ Initialize the entire section_metadata structure.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-03-05 dann frazier <dann.frazier@canonical.com>
+
+ Revert "Keep the native terminal active when enabling gfxterm"
+ This can cause an issue where GRUB is trying to display both a text and
+ graphical menu on the display at the same time, resulting in a flickering
+ effect when e.g. scrolling quickly through a menu (LP: #1752767).
+
+ Revert for now while we look for a better solution for the original issue.
+
+ This reverts commit 52ef7b23f528ce844716661d586497a177e80d5b.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-03-05 Eric Snowberg <eric.snowberg@oracle.com>
+
+ sparc64: #blocks64 disk node method
+ Return the 64bit number of blocks of storage associated with the device or
+ instance. Where a "block" is a unit of storage consisting of the number of
+ bytes returned by the package's "block-size" method. If the size cannot be
+ determined, or if the number of blocks exceeds the range return -1.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-03-05 Eric Snowberg <eric.snowberg@oracle.com>
+
+ sparc64: #blocks disk node method
+ Return the number of blocks of storage associated with the device or
+ instance. Where a "block" is a unit of storage consisting of the number
+ of bytes returned by the package's "block-size" method. If the size cannot
+ be determined, the #blocks method returns the maximum unsigned integer
+ (which, because of Open Firmware's assumption of two's complement arithmetic,
+ is equivalent to the signed number -1). If the number of blocks exceeds
+ the range of an unsigned number, return 0 to alert the caller to try
+ the #blocks64 command.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-03-05 Eric Snowberg <eric.snowberg@oracle.com>
+
+ ieee1275: block-size deblocker support method
+ IEEE Std 1275-1994 Standard for Boot (Initialization Configuration)
+ Firmware: Core Requirements and Practices
+
+ 3.8.3 deblocker support package
+
+ Any package that uses the "deblocker" support package must define
+ the following method, which the deblocker uses as a low-level
+ interface to the device
+
+ block-size ( -- block-len ) Return "granularity" for accesses to this
+ device.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-03-05 Daniel Kiper <daniel.kiper@oracle.com>
+
+ ieee1275: no-data-command bus specific method
+ IEEE 1275-1994 Standard for Boot (Initialization Configuration)
+ Firmware: Core Requirements and Practices
+
+ E.3.2.2 Bus-specific methods for bus nodes
+
+ A package implementing the scsi-2 device type shall implement the
+ following bus-specific method:
+
+ no-data-command ( cmd-addr -- error? )
+ Executes a simple SCSI command, automatically retrying under
+ certain conditions. cmd-addr is the address of a 6-byte command buffer
+ containing an SCSI command that does not have a data transfer phase.
+ Executes the command, retrying indefinitely with the same retry criteria
+ as retry-command.
+
+ error? is nonzero if an error occurred, zero otherwise.
+ NOTE no-data-command is a convenience function. It provides
+ no capabilities that are not present in retry-command, but for
+ those commands that meet its restrictions, it is easier to use.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-03-05 Eric Snowberg <eric.snowberg@oracle.com>
+
+ ieee1275: set-address bus specific method
+ IEEE 1275-1994 Standard for Boot (Initialization Configuration)
+ Firmware: Core Requirements and Practices
+ E.3.2.2 Bus-specific methods for bus nodes
+
+ A package implementing the scsi-2 device type shall implement the
+ following bus-specific method:
+
+ set-address ( unit# target# -- )
+ Sets the SCSI target number (0x0..0xf) and unit number (0..7) to which
+ subsequent commands apply.
+
+ This function is for devices with #address-cells == 2
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-03-05 Eric Snowberg <eric.snowberg@oracle.com>
+
+ ieee1275: encode-unit command for 4 addr cell devs
+ Convert physical address to text unit-string.
+
+ Convert phys.lo ... phys-high, the numerical representation, to unit-string,
+ the text string representation of a physical address within the address
+ space defined by this device node. The number of cells in the list
+ phys.lo ... phys.hi is determined by the value of the #address-cells property
+ of this node.
+
+ This function is for devices with #address-cells == 4
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-03-05 Eric Snowberg <eric.snowberg@oracle.com>
+
+ ieee1275: decode-unit command for 4 addr cell devs
+ decode-unit ( addr len -- phys.lo ... phys.hi )
+
+ Convert text unit-string to physical address.
+
+ Convert unit-string, the text string representation, to phys.lo ... phys.hi,
+ the numerical representation of a physical address within the address space
+ defined by this device node. The number of cells in the list
+ phys.lo ... phys.hi is determined by the value of the #address-cells
+ property of this node.
+
+ This function is for devices with #address-cells == 4
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-03-05 Eric Snowberg <eric.snowberg@oracle.com>
+
+ sparc64: Limit nvme of_path_of_nvme to just SPARC
+ Limit NVMe of_path_of_nvme to just SPARC hardware for now. It has been
+ found that non-Open Firmware hardware platforms can some how access
+ this function.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-03-05 John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
+
+ ieee1275: Fix crash in of_path_of_nvme when of_path is empty
+ The of_path_of_nvme function (commit 2391d57, ieee1275: add nvme
+ support within ofpath) introduced a functional regression:
+
+ On systems which are not based on Open Firmware but have at
+ least one NVME device, find_obppath will return NULL and thus
+ trying to append the disk name to of_path will result in a
+ crash.
+
+ The proper behavior of of_path_of_nvme is, however, to just
+ return NULL in such cases, like other users of find_obppath,
+ such as of_path_of_scsi.
+
+ Reviewed-by: Eric Snowberg <eric.snowberg@oracle.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-03-05 Peter Jones <pjones@redhat.com>
+
+ .mod files: Strip annobin annotations and .eh_frame, and their relocations
+ This way debuginfo built from the .module will still include this
+ information, but the final result won't have the data we don't actually
+ need in the modules, either on-disk, loaded at runtime, or in prebuilt
+ images.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-03-05 Peter Jones <pjones@redhat.com>
+
+ mkimage: avoid copying relocations for sections that won't be copied.
+ Some versions of gcc include a plugin called "annobin", and in some
+ build systems this is enabled by default. This plugin creates special
+ ELF note sections to track which ABI-breaking features are used by a
+ binary, as well as a series of relocations to annotate where.
+
+ If grub is compiled with this feature, then when grub-mkimage translates
+ the binary to another file format which does not strongly associate
+ relocation data with sections (i.e. when platform is *-efi), these
+ relocations appear to be against the .text section rather than the
+ original note section. When the binary is loaded by the PE runtime
+ loader, hilarity ensues.
+
+ This issue is not necessarily limited to the annobin, but could arise
+ any time there are relocations in sections that are not represented in
+ grub-mkimage's output.
+
+ This patch seeks to avoid this issue by only including relocations that
+ refer to sections which will be included in the final binary.
+
+ As an aside, this should also obviate the need to avoid -funwind-tables,
+ -fasynchronous-unwind-tables, and any sections similar to .eh_frame in
+ the future. I've tested it on x86-64-efi with the following gcc command
+ line options (as recorded by -grecord-gcc-flags), but I still need to
+ test the result on some other platforms that have been problematic in
+ the past (especially ARM Aarch64) before I feel comfortable making
+ changes to the configure.ac bits:
+
+ GNU C11 7.2.1 20180116 (Red Hat 7.2.1-7) -mno-mmx -mno-sse -mno-sse2 -mno-sse3 -mno-3dnow -msoft-float -mno-stack-arg-probe -mcmodel=large -mno-red-zone -m64 -mtune=generic -march=x86-64 -g3 -Os -freg-struct-return -fno-stack-protector -ffreestanding -funwind-tables -fasynchronous-unwind-tables -fno-strict-aliasing -fstack-clash-protection -fno-ident -fplugin=annobin
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-03-05 Peter Jones <pjones@redhat.com>
+
+ mkimage: refactor a bunch of section data into a struct.
+ This basically moves a bunch of the section information we pass around a
+ lot into a struct, and passes a pointer to a single one of those
+ instead.
+
+ This shouldn't change the binary file output or the "grub-mkimage -v"
+ output in any way.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-03-05 Peter Jones <pjones@redhat.com>
+
+ mkimage: make locate_sections() set up vaddresses as well.
+ This puts both kinds of address initialization at the same place, and also lets
+ us iterate through the section list one time fewer.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-03-05 Peter Jones <pjones@redhat.com>
+
+ mkimage: rename a couple of things to be less confusing later.
+ This renames some things:
+
+ - the "strtab" and "strtab_section" in relocate_symbols are changed to "symtab"
+ instead, so as to be less confusing when "strtab" is moved to a struct in a
+ later patch.
+
+ - The places where we pass section_vaddresses to functions are changed to also
+ be called section_vaddresses"inside those functions, so I get less confused
+ when I put addresses and vaddresses in a struct in a later patch.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-03-05 Peter Jones <pjones@redhat.com>
+
+ mkimage: make it easier to run syntax checkers on grub-mkimagexx.c
+ This makes it so you can treat grub-mkimagexx.c as a file you can build
+ directly, so syntax checkers like vim's "syntastic" plugin, which uses
+ "gcc -x c -fsyntax-only" to build it, will work.
+
+ One still has to do whatever setup is required to make it pick the right
+ include dirs, which -W options we use, etc., but this makes it so you
+ can do the checking on the file you're editing, rather than on a
+ different file.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-03-05 Peter Jones <pjones@redhat.com>
+
+ aout.h: Fix missing include.
+ grub_aout_load() has a grub_file_t parameter, and depending on what order
+ includes land in, it's sometimes not defined. This patch explicitly adds
+ file.h to aout.h so that it will always be defined.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-02-26 Joakim Bech <joakim.bech@linaro.org>
+
+ ieee1275: fix build regression in of_path_of_nvme
+ The of_path_of_nvme function (commit 2391d57, ieee1275: add nvme
+ support within ofpath) introduced a build regression:
+ grub-core/osdep/linux/ofpath.c:365:21: error: comparison between pointer
+ and zero character constant [-Werror=pointer-compare]
+ if ((digit_string != '\0') && (*part_end == 'p'))
+
+ Update digit_string to compare against the char instead of the pointer.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-02-23 Leif Lindholm <leif.lindholm@linaro.org>
+
+ arm: make linux.h safe to include for non-native builds
+ <grub/machine/loader.h> (for machine arm/efi) and
+ <grub/machine/kernel.h> (for machine arm/coreboot) will not always
+ resolve (and will likely not be valid to) if pulled in when building
+ non-native commands, such as host tools or the "file" command.
+ So explicitly include them with their expanded pathnames.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-02-23 Leif Lindholm <leif.lindholm@linaro.org>
+
+ arm: switch linux loader to linux_arm_kernel_header struct
+ Use kernel header struct and magic definition to align (and coexist) with
+ i386/arm64 ports.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-02-23 Leif Lindholm <leif.lindholm@linaro.org>
+
+ arm64: align linux kernel magic macro naming with i386
+ Change GRUB_ARM64_LINUX_MAGIC to GRUB_LINUX_ARM64_MAGIC_SIGNATURE.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-02-23 Leif Lindholm <leif.lindholm@linaro.org>
+
+ arm64: align linux kernel header struct naming with i386
+ Rename struct grub_arm64_linux_kernel_header -> linux_arm64_kernel_header.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-02-23 Leif Lindholm <leif.lindholm@linaro.org>
+
+ i386: make struct linux_kernel_header architecture specific
+ struct linux_kernel_header -> struct linux_i386_kernel_header
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-02-23 Leif Lindholm <leif.lindholm@linaro.org>
+
+ make GRUB_LINUX_MAGIC_SIGNATURE architecture-specific
+ Rename GRUB_LINUX_MAGIC_SIGNATURE GRUB_LINUX_I386_MAGIC_SIGNATURE,
+ to be usable in code that supports more than one image type.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-02-23 Leif Lindholm <leif.lindholm@linaro.org>
+
+ Make arch-specific linux.h include guards architecture unique
+ Replace uses of GRUB_LINUX_MACHINE_HEADER and GRUB_LINUX_CPU_HEADER
+ with GRUB_<arch>_LINUX_HEADER include guards to prevent issues when
+ including more than one of them.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-02-23 Leif Lindholm <leif.lindholm@linaro.org>
+
+ arm64/efi: move EFI_PAGE definitions to efi/memory.h
+ The EFI page definitions and macros are generic and should not be confined
+ to arm64 headers - so move to efi/memory.h.
+ Also add EFI_PAGE_SIZE macro.
+
+ Update loader sources to reflect new header location.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-02-23 Colin Watson <cjwatson@ubuntu.com>
+
+ libgcrypt: Import replacement CRC operations
+ The CRC implementation imported from libgcrypt 1.5.3 is arguably
+ non-free, due to being encumbered by the restrictive Internet Society
+ licence on RFCs (see e.g. https://wiki.debian.org/NonFreeIETFDocuments).
+ Fortunately, libgcrypt has since replaced it with a version that is both
+ reportedly better-optimised and doesn't suffer from this encumbrance.
+
+ The ideal solution would be to update to a new version of libgcrypt, and
+ I spent some time trying to do that. However, util/import_gcry.py
+ requires complex modifications to cope with the new version, and I
+ stalled part-way through; furthermore, GRUB's libgcrypt tree already
+ contains some backports of upstream changes. Rather than allowing the
+ perfect to be the enemy of the good, I think it's best to backport this
+ single change to at least sort out the licensing situation. Doing so
+ won't make things any harder for a future wholesale upgrade.
+
+ This commit is mostly a straightforward backport of
+ https://git.gnupg.org/cgi-bin/gitweb.cgi?p=libgcrypt.git;a=commitdiff;h=06e122baa3321483a47bbf82fd2a4540becfa0c9,
+ but I also imported bufhelp.h from libgcrypt 1.7.0 (newer versions
+ required further changes elsewhere).
+
+ I've tested that "hashsum -h crc32" still produces correct output for a
+ variety of files on both i386-pc and x86_64-emu targets.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-02-23 Eric Snowberg <eric.snowberg@oracle.com>
+
+ ieee1275: add nvme support within ofpath
+ Add NVMe support within ofpath.
+
+ The Open Firmware text representation for a NVMe device contains the
+ Namespace ID. An invalid namespace ID is one whose value is zero or whose
+ value is greater than the value reported by the Number of Namespaces (NN)
+ field in the Identify Controller data structure. At the moment only a
+ single Namespace is supported, therefore the value is currently hard coded
+ to one.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-02-23 Daniel Kiper <daniel.kiper@oracle.com>
+
+ chainloader: Fix wrong break condition (must be AND not, OR)
+ The definition of bpb's num_total_sectors_16 and num_total_sectors_32
+ is that either the 16-bit field is non-zero and is used (in which case
+ eg mkfs.fat sets the 32-bit field to zero), or it is zero and the
+ 32-bit field is used. Therefore, a BPB is invalid only if *both*
+ fields are zero; having one field as zero and the other as non-zero is
+ the case to be expected. (Indeed, according to Microsoft's specification
+ one of the fields *must* be zero, and the other non-zero.)
+
+ This affects all users of grub_chainloader_patch_bpb which are in
+ chainloader.c, freedos.c, and ntldr.c
+
+ Some descriptions of the semantics of these two fields:
+
+ https://www.win.tue.nl/~aeb/linux/fs/fat/fat-1.html
+
+ The old 2-byte fields "total number of sectors" and "number of
+ sectors per FAT" are now zero; this information is now found in
+ the new 4-byte fields.
+
+ (Here given in the FAT32 EBPB section but the total sectors 16/32 bit
+ fields semantic is true of FAT12 and FAT16 too.)
+
+ https://wiki.osdev.org/FAT#BPB_.28BIOS_Parameter_Block.29
+
+ 19 | 2 | The total sectors in the logical volume. If this value is 0,
+ it means there are more than 65535 sectors in the volume, and the actual
+ count is stored in "Large Sectors (bytes 32-35).
+
+ 32 | 4 | Large amount of sector on media. This field is set if there
+ are more than 65535 sectors in the volume.
+
+ (Doesn't specify what the "large" field is set to when unused, but as
+ mentioned mkfs.fat sets it to zero then.)
+
+ https://technet.microsoft.com/en-us/library/cc976796.aspx
+
+ 0x13 | WORD | 0x0000 |
+ Small Sectors . The number of sectors on the volume represented in 16
+ bits (< 65,536). For volumes larger than 65,536 sectors, this field
+ has a value of zero and the Large Sectors field is used instead.
+
+ 0x20 | DWORD | 0x01F03E00 |
+ Large Sectors . If the value of the Small Sectors field is zero, this
+ field contains the total number of sectors in the FAT16 volume. If the
+ value of the Small Sectors field is not zero, the value of this field
+ is zero.
+
+ https://staff.washington.edu/dittrich/misc/fatgen103.pdf page 10
+
+ BPB_TotSec16 | 19 | 2 |
+ This field is the old 16-bit total count of sectors on the volume.
+ This count includes the count of all sectors in all four regions of the
+ volume. This field can be 0; if it is 0, then BPB_TotSec32 must be
+ non-zero. For FAT32 volumes, this field must be 0. For FAT12 and
+ FAT16 volumes, this field contains the sector count, and
+ BPB_TotSec32 is 0 if the total sector count “fits” (is less than
+ 0x10000).
+
+ BPB_TotSec32 | 32 | 4 |
+ This field is the new 32-bit total count of sectors on the volume.
+ This count includes the count of all sectors in all four regions of the
+ volume. This field can be 0; if it is 0, then BPB_TotSec16 must be
+ non-zero. For FAT32 volumes, this field must be non-zero. For
+ FAT12/FAT16 volumes, this field contains the sector count if
+ BPB_TotSec16 is 0 (count is greater than or equal to 0x10000).
+
+ (This specifies that an unused BPB_TotSec32 field is set to zero.)
+
+ By the way fix offsets in include/grub/fat.h.
+
+ Tested with lDebug booted in qemu via grub2's
+ FreeDOS direct loading support, refer to
+ https://bitbucket.org/ecm/ldosboot + https://bitbucket.org/ecm/ldebug
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-02-23 H.J. Lu <hjl.tools@gmail.com>
+
+ x86-64: Treat R_X86_64_PLT32 as R_X86_64_PC32
+ Starting from binutils commit bd7ab16b4537788ad53521c45469a1bdae84ad4a:
+
+ https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=bd7ab16b4537788ad53521c45469a1bdae84ad4a
+
+ x86-64 assembler generates R_X86_64_PLT32, instead of R_X86_64_PC32, for
+ 32-bit PC-relative branches. Grub2 should treat R_X86_64_PLT32 as
+ R_X86_64_PC32.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-02-14 Steve McIntyre <steve@einval.com>
+
+ Make grub-install check for errors from efibootmgr
+ Code is currently ignoring errors from efibootmgr, giving users
+ clearly bogus output like:
+
+ Setting up grub-efi-amd64 (2.02~beta3-4) ...
+ Installing for x86_64-efi platform.
+ Could not delete variable: No space left on device
+ Could not prepare Boot variable: No space left on device
+ Installation finished. No error reported.
+
+ and then potentially unbootable systems. If efibootmgr fails, grub-install
+ should know that and report it!
+
+ We've been using similar patch in Debian now for some time, with no ill effects.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-02-14 Eric Snowberg <eric.snowberg@oracle.com>
+
+ sparc64: fix OF path names for sun4v systems
+ Fix the Open Firmware (OF) path property for sun4v SPARC systems.
+ These platforms do not have a /sas/ within their path. Over time
+ different OF addressing schemes have been supported. There
+ is no generic addressing scheme that works across every HBA.
+
+ It looks that this functionality will not work if you try to cross-install
+ SPARC GRUB2 binary using e.g. x86 grub-install. By default it should work.
+ However, we will also have other issues here, like lack of access to OF
+ firmware/paths, which make such configs unusable anyway. So, let's leave
+ this patch as is for time being. If somebody cares then he/she should fix
+ the issue(s) at some point.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-02-14 Eric Snowberg <eric.snowberg@oracle.com>
+
+ sparc64: Add blocklist GPT support for SPARC
+ Add block-list GPT support for SPARC. The OBP "load" and "boot" methods
+ are partition aware and neither command can see the partition table. Also
+ neither command can address the entire physical disk. When the install
+ happens, grub generates the block-list entries based on the beginning of the
+ physical disk, not the beginning of the partition. This patch fixes the
+ block-list entries so they match what OBP expects during boot for a GPT disk.
+
+ T5 and above now supports GPT as well as VTOC.
+
+ This patch has been tested on T5-2 and newer SPARC systems.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-01-29 Stefan Fritsch <fritsch@genua.de>
+
+ ahci: Improve error handling
+ Check the error bits in the interrupt status register. According to the
+ AHCI 1.2 spec, "Interrupt sources that are disabled (‘0’) are still
+ reflected in the status registers.", so this should work even though
+ grub uses polling
+
+ This fixes the following problem on a Fujitsu E744 laptop:
+
+ Sometimes there is a very long delay (up to several minutes) when
+ booting from hard disk. It seems accessing the DVD drive (which has no
+ disk inserted) sometimes fails with some errors, which leads to each
+ access being stalled until the 20s timeout triggers. This seems to
+ happen when grub is trying to read filesystem/partition data.
+
+ The problem is that the command_issue bit that is checked in the loop is
+ only reset if the "HBA receives a FIS which clears the BSY, DRQ, and ERR
+ bits for the command", but the ERR bit is never cleared. Therefore
+ command_issue is never reset and grub waits for the timeout.
+
+ The relevant bit in our case is the Task File Error Status (TFES), which
+ is equivalent to the ERR bit 0 in tfd. But this patch also checks
+ the other error bits except for the "Interface non-fatal error status"
+ bit.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2018-01-29 dann frazier <dann.frazier@canonical.com>
+
+ Keep the native terminal active when enabling gfxterm
+ grub-mkconfig will set GRUB_TERMINAL_OUTPUT to "gfxterm" unless the user
+ has overridden it. On EFI systems, this will stop output from going to the
+ default "console" terminal. When the EFI fw console is configured to output to
+ both serial and video, this will cause GRUB to only display on video - while
+ continuing to accept input from both video and serial.
+
+ Instead of switching from "console" to "gfxterm", let's output to both.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2017-12-06 Julien Grall <julien.grall@linaro.org>
+
+ arm64/xen: Add missing #address-cells and #size-cells properties
+ The properties #address-cells and #size-cells are used to know the
+ number of cells for ranges provided by "regs". If they don't exist, the
+ value are resp. 2 and 1.
+
+ Currently, when multiboot nodes are created it is assumed that #address-cells
+ and #size-cells are exactly 2. However, they are never set by GRUB and
+ will result to later failure when the device-tree is generated by GRUB
+ or contain different values.
+
+ To prevent this failure, create the both properties in the chosen nodes.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2017-12-06 Jordan Glover <Golden_Miller83@protonmail.ch>
+
+ grub-mkconfig: Fix detecting .sig files as system images
+ grub-mkconfig detects detached RSA signatures for kernel images used for
+ signature checking as valid images and adds them to grub.cfg as separate
+ menu entries. This patch adds .sig extension to common blacklist.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2017-12-06 Eric Snowberg <eric.snowberg@oracle.com>
+
+ ieee1275: Fix segfault in grub-ofpathname
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2017-11-28 Eric Snowberg <eric.snowberg@oracle.com>
+
+ grub-install: Fix memory leak
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2017-11-24 Eric Snowberg <eric.snowberg@oracle.com>
+
+ ls: prevent double open
+ Prevent a double open. This can cause problems with some ieee1275
+ devices, causing the system to hang. The double open can occur
+ as follows:
+
+ grub_ls_list_files (char *dirname, int longlist, int all, int human)
+ dev = grub_device_open (device_name);
+ dev remains open while:
+ grub_normal_print_device_info (device_name);
+ dev = grub_device_open (name);
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2017-10-06 David E. Box <david.e.box@linux.intel.com>
+
+ tsc: Change default tsc calibration method to pmtimer on EFI systems
+ On efi systems, make pmtimer based tsc calibration the default over the
+ pit. This prevents Grub from hanging on Intel SoC systems that power gate
+ the pit.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2017-09-07 Alexander Graf <agraf@suse.de>
+
+ efi: Free malloc regions on exit
+ When we exit grub, we don't free all the memory that we allocated earlier
+ for our heap region. This can cause problems with setups where you try
+ to descend the boot order using "exit" entries, such as PXE -> HD boot
+ scenarios.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2017-09-07 Alexander Graf <agraf@suse.de>
+
+ efi: Move grub_reboot() into kernel
+ The reboot function calls machine_fini() and then reboots the system.
+ Currently it lives in lib/ which means it gets compiled into the
+ reboot module which lives on the heap.
+
+ In a following patch, I want to free the heap on machine_fini()
+ though, so we would free the memory that the code is running in. That
+ obviously breaks with smarter UEFI implementations.
+
+ So this patch moves it into the core. That way we ensure that all
+ code running after machine_fini() in the UEFI case is running from
+ memory that got allocated (and gets deallocated) by the UEFI core.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2017-09-07 Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+
+ Use grub-file to figure out whether multiboot2 should be used for Xen.gz
+ The multiboot2 is much more preferable than multiboot. Especiall
+ if booting under EFI where multiboot does not have the functionality
+ to pass ImageHandler.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2017-09-07 Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+
+ Fix util/grub.d/20_linux_xen.in: Add xen_boot command support for aarch64
+ Commit d33045ce7ffcb7c1e4a60c14d5ca64b36e3c5abe introduced
+ the support for this, but it does not work under x86 (as it stops
+ 20_linux_xen from running).
+
+ The 20_linux_xen is run under a shell and any exits from within it:
+
+ (For example on x86):
+ + /usr/bin/grub2-file --is-arm64-efi /boot/xen-4.9.0.gz
+ [root@tst063 grub]# echo $?
+ 1
+
+ will result in 20_linux_xen exiting without continuing
+ and also causing grub2-mkconfig to stop processing.
+
+ As in:
+
+ [root@tst063 grub]# ./grub-mkconfig | tail
+ Generating grub configuration file ...
+ Found linux image: /boot/vmlinuz-4.13.0-0.rc5.git1.1.fc27.x86_64
+ Found initrd image: /boot/initramfs-4.13.0-0.rc5.git1.1.fc27.x86_64.img
+ Found linux image: /boot/vmlinuz-0-rescue-ec082ee24aea41b9b16aca52a6d10cc2
+ Found initrd image: /boot/initramfs-0-rescue-ec082ee24aea41b9b16aca52a6d10cc2.img
+ echo 'Loading Linux 0-rescue-ec082ee24aea41b9b16aca52a6d10cc2 ...'
+ linux /vmlinuz-0-rescue-ec082ee24aea41b9b16aca52a6d10cc2 root=/dev/mapper/fedora_tst063-root ro single
+ echo 'Loading initial ramdisk ...'
+ initrd /initramfs-0-rescue-ec082ee24aea41b9b16aca52a6d10cc2.img
+ }
+ }
+
+ ### END /usr/local/etc/grub.d/10_linux ###
+
+ ### BEGIN /usr/local/etc/grub.d/20_linux_xen ###
+
+ root@tst063 grub]#
+
+ And no more.
+
+ This patch wraps the invocation of grub-file to be a in subshell
+ and to process the return value in a conditional. That fixes
+ the issue.
+
+ RH-BZ 1486002: grub2-mkconfig does not work if xen.gz is installed.
+
+ CC: Fu Wei <fu.wei@linaro.org>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2017-09-07 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Fix compilation for x86_64-efi.
+
+2017-09-05 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Add a file missing in multiboot2 commit.
+
+2017-08-30 Vladimir Serbinenko <phcoder@google.com>
+
+ gzio: fix unaligned access
+
+ grub-fs-tester: Fix bashism
+
+2017-08-30 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Regenerate checksum.h with newer unifont.
+ Old link is broken. New unifont is
+ http://ftp.de.debian.org/debian/pool/main/u/unifont/xfonts-unifont_9.0.06-2_all.deb
+
+ printf_unit_test: Disable Wformat-truncation on GCC >= 7
+ We intentionally pass NULL as argument to format, hence disable the warning.
+
+ qemu, coreboot, multiboot: Change linking address to 0x9000.
+ It's common for distros to use a defective ld which links at 0x9000. Instead
+ of fighting it, just move link target to 0x9000.
+
+2017-08-30 Stefan Fritsch <sf@sfritsch.de>
+
+ Implement checksum verification for gunzip
+ This implements the crc32 check for the gzip format. Support for zlib's
+ adler checksum is not included, yet.
+
+2017-08-30 Vladimir Serbinenko <phcoder@gmail.com>
+
+ xfs: Don't attempt to iterate over empty directory.
+ Reported by: Tuomas Tynkkynen
+
+2017-08-30 Patrick Steinhardt <ps@pks.im>
+
+ unix exec: avoid atexit handlers when child exits
+ The `grub_util_exec_redirect_all` helper function can be used to
+ spawn an executable and redirect its output to some files. After calling
+ `fork()`, the parent will wait for the child to terminate with
+ `waitpid()` while the child prepares its file descriptors, environment
+ and finally calls `execvp()`. If something in the children's setup
+ fails, it will stop by calling `exit(127)`.
+
+ Calling `exit()` will cause any function registered via `atexit()` to be
+ executed, which is usually the wrong thing to do in a child. And
+ actually, one can easily observe faulty behaviour on musl-based systems
+ without modprobe(8) installed: executing `grub-install --help` will call
+ `grub_util_exec_redirect_all` with "modprobe", which obviously fails if
+ modprobe(8) is not installed. Due to the child now exiting and invoking
+ the `atexit()` handlers, it will clean up some data structures of the
+ parent and cause it to be deadlocked in the `waitpid()` syscall.
+
+ The issue can easily be fixed by calling `_exit(127)` instead, which is
+ especially designed to be called when the atexit-handlers should not be
+ executed.
+
+2017-08-30 Vladimir Serbinenko <phcoder@gmail.com>
+
+ arc: Do not create spurious variable grub_arc_memory_type_t.
+
+2017-08-14 Xuan Guo <nbdd0121>
+
+ Set have_exec to y on cygwin so we have grub_mkrescue.
+
+2017-08-14 Vladimir Serbinenko <phcoder@gmail.com>
+
+ enforcing fixup
+
+ multiboot fixup
+
+ linux fixup
+
+ yylex: Explicilty cast fprintf to void.
+ It's needed to avoid warning on recent GCC.
+
+ genmoddep: Check that no modules provide the same symbol.
+ The semantics of 2 modules providing the same symbol are undefined. So
+ ensure that it doesn't happen.
+
+ Fix symbols appearing in several modules in linux*.
+ If same symbol is provided by 2 modules its semantics are undefined.
+ Avoid this by depending rather than double-including files.
+
+2017-08-14 Vladimir Serbinenko <phcoder@gmail.com>
+
+ multiboot: disentangle multiboot and multiboot2.
+ Previously we had multiboot and multiboot2 declaring the same symbols.
+ This can potentially lead to aliasing and strange behaviours when e.g.
+ module instead of module2 is used with multiboot2.
+
+ Bug: #51137
+
+2017-08-14 Vladimir Serbinenko <phcoder@gmail.com>
+
+ hdparm: Depend on hexdump rather than having a second copy of hexdump.
+
+ grub.texi: Fix typo
+ Reported by: Ori Avtalion <saltyhorse>
+
+2017-08-07 Pete Batard <pete@akeo.ie>
+
+ io: add a GRUB_GZ prefix to gzio specific defines
+ * This is done to avoid a conflict with a PACKED define in the EDK2
+
+ core: use GRUB_TERM_ definitions when handling term characters
+ * Also use hex value for GRUB_TERM_ESC as '\e' is not in the C standard and is not understood by some compilers
+
+2017-08-07 Leif Lindholm <leif.lindholm@linaro.org>
+
+ efi: change heap allocation type to GRUB_EFI_LOADER_CODE
+ With upcoming changes to EDK2, allocations of type EFI_LOADER_DATA may
+ not return regions with execute ability. Since modules are loaded onto
+ the heap, change the heap allocation type to GRUB_EFI_LOADER_CODE in
+ order to permit execution on systems with this feature enabled.
+
+ Closes: 50420
+
+2017-08-07 Leif Lindholm <leif.lindholm@linaro.org>
+
+ arm64 linux loader: improve type portability
+ In preparation for turning this into a common loader for 32-bit and 64-bit
+ platforms, ensure the code will compile cleanly for either.
+
+2017-08-07 Leif Lindholm <leif.lindholm@linaro.org>
+
+ efi: Add GRUB_PE32_MAGIC definition
+ Add a generic GRUB_PE32_MAGIC definition for the PE 'MZ' tag and delete
+ the existing one in arm64/linux.h.
+
+ Update arm64 Linux loader to use this new definition.
+
+2017-08-07 Leif Lindholm <leif.lindholm@linaro.org>
+
+ efi: move fdt helper library
+ There is nothing ARM64 (or even ARM) specific about the efi fdt helper
+ library, which is used for locating or overriding a firmware-provided
+ devicetree in a UEFI system - so move it to loader/efi for reuse.
+
+ Move the fdtload.h include file to grub/efi and update path to
+ efi/fdtload.h in source code referring to it.
+
+2017-08-07 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Remove grub_efi_allocate_pages.
+ grub_efi_allocate_pages Essentially does 2 unrelated things:
+ * Allocate at fixed address.
+ * Allocate at any address.
+
+ To switch between 2 different functions it uses address == 0 as magic
+ value which is wrong as 0 is a perfectly valid fixed adress to allocate at.
+
+2017-08-07 Leif Lindholm <leif.lindholm@linaro.org>
+
+ efi: refactor grub_efi_allocate_pages
+ Expose a new function, grub_efi_allocate_pages_real(), making it possible
+ to specify allocation type and memory type as supported by the UEFI
+ AllocatePages boot service.
+
+ Make grub_efi_allocate_pages() a consumer of the new function,
+ maintaining its old functionality.
+
+ Also delete some left-around #if 1/#else blocks in the affected
+ functions.
+
+2017-08-07 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Fail if xorriso failed.
+ If xorriso failed most likely we didn't generate a meaningful image.
+
+ mkrescue: Check xorriso presence before doing anything else.
+ mkrescue can't do anything useful without xorriso, so abort early if it's
+ not available.
+
+2017-08-07 Pali Rohár <pali.rohar@gmail.com>
+
+ * grub-core/fs/udf.c: Add support for UUID
+ Use same algorithm as in libblkid from util-linux v2.30.
+
+ 1. Take first 16 bytes from UTF-8 encoded string of VolumeSetIdentifier
+ 2. If all bytes are hexadecimal digits, convert to lowercase and use as UUID
+ 3. If first 8 bytes are not all hexadecimal digits, convert those 8 bytes
+ to their hexadecimal representation, resulting in 16 bytes for UUID
+ 4. Otherwise, compose UUID from two parts:
+ 1. part: converted first 8 bytes (which are hexadecimal digits) to lowercase
+ 2. part: encoded following 4 bytes to their hexadecimal representation (16 bytes)
+
+ So UUID would always have 16 hexadecimal digits in lowercase variant.
+
+ According to UDF specification, first 16 Unicode characters of
+ VolumeSetIdentifier should be unique value and first 8 should be
+ hexadecimal characters.
+
+ In most cases all 16 characters are hexadecimal, but e.g. MS Windows
+ format.exe set only first 8 as hexadecimal and remaining as fixed
+ (non-unique) which violates specification.
+
+2017-08-07 Pali Rohár <pali.rohar@gmail.com>
+
+ udf: Fix reading label, lvd.ident is dstring
+ UDF dstring has stored length in the last byte of buffer. Therefore last
+ byte is not part of recorded characters. And empty string in dstring is
+ encoded as empty buffer, including first byte (compression id).
+
+2017-08-07 Pete Batard <pete@akeo.ie>
+
+ zfs: remove size_t typedef and use grub_size_t instead
+ * Prevents some toolchains from issuing a warning on size_t redef.
+
+2017-08-03 Rob Clark <rclark@redhat.com>
+
+ Fix a segfault in lsefi
+ when protocols_per_handle returns error, we can't use the pointers we
+ passed to it, and that includes trusting num_protocols.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2017-07-10 Vladimir Serbinenko <phcoder@gmail.com>
+
+ fdt: silence clang warning.
+
+2017-07-09 Vladimir Serbinenko <phcoder@gmail.com>
+
+ arm-efi: Fix compilation
+
+2017-07-09 AppChecker <appchecker>
+
+ crypto: Fix use after free.
+ Reported by: AppChecker
+ Transformed to patch by: Satish Govindarajan
+
+2017-07-09 Vladimir Serbinenko <phcoder@gmail.com>
+
+ ehci: Fix compilation on i386
+
+2017-07-09 phcoder <phcoder@sid.debian.laptop.phnet>
+
+ cache: Fix compilation for ppc, sparc and arm64
+
+ ehci: Fix compilation for amd64
+
+2017-06-29 Eric Biggers <ebiggers@google.com>
+
+ Allow GRUB to mount ext2/3/4 filesystems that have the encryption feature.
+ On such a filesystem, inodes may have EXT4_ENCRYPT_FLAG set.
+ For a regular file, this means its contents are encrypted; for a
+ directory, this means the filenames in its directory entries are
+ encrypted; and for a symlink, this means its target is encrypted. Since
+ GRUB cannot decrypt encrypted contents or filenames, just issue an error
+ if it would need to do so. This is sufficient to allow unencrypted boot
+ files to co-exist with encrypted files elsewhere on the filesystem.
+
+ (Note that encrypted regular files and symlinks will not normally be
+ encountered outside an encrypted directory; however, it's possible via
+ hard links, so they still need to be handled.)
+
+ Tested by booting from an ext4 /boot partition on which I had run
+ 'tune2fs -O encrypt'. I also verified that the expected error messages
+ are printed when trying to access encrypted directories, files, and
+ symlinks from the GRUB command line. Also ran 'sudo ./grub-fs-tester
+ ext4_encrypt'; note that this requires e2fsprogs v1.43+ and Linux v4.1+.
+
+2017-05-29 Eric Snowberg <eric.snowberg@oracle.com>
+
+ sparc64: Don't use devspec to determine the OBP path
+ Don't use devspec to determine the OBP path on SPARC hardware. Within all
+ versions of Linux on SPARC, the devspec returns one of three values:
+ "none", "vnet-port", or "vdisk". Unlike on PPC, none of these values
+ are useful in determining the OBP path.
+
+ Before this patch grub-ofpathname always returned the wrong value
+ for a virtual disk. For example:
+
+ % grub-ofpathname /dev/vdiskc2
+ vdisk/disk@2:b
+
+ After this patch it now returns the correct value:
+
+ % grub-ofpathname /dev/vdiskc2
+ /virtual-devices@100/channel-devices@200/disk@2:b
+
+ Orabug: 24459765
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2017-05-18 Fu Wei <fu.wei@linaro.org>
+
+ arm64: Update the introduction of Xen boot commands in docs/grub.texi
+ delete: xen_linux, xen_initrd, xen_xsm
+ add: xen_module
+
+ This update bases on
+ commit 0edd750e50698854068358ea53528100a9192902
+ Author: Vladimir Serbinenko <phcoder@gmail.com>
+ Date: Fri Jan 22 10:18:47 2016 +0100
+
+ xen_boot: Remove obsolete module type distinctions.
+
+ Also bases on the module loading mechanism of Xen code:
+ 488c2a8 docs/arm64: clarify the documention for loading XSM support
+ 67831c4 docs/arm64: update the documentation for loading XSM support
+ ca32012 xen/arm64: check XSM Magic from the second unknown module.
+
+ Reviewed-by: Julien Grall <julien.grall@arm.com>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2017-05-18 Fu Wei <fu.wei@linaro.org>
+
+ util/grub.d/20_linux_xen.in: Add xen_boot command support for aarch64
+ This patch adds the support of xen_boot command for aarch64:
+ xen_hypervisor
+ xen_module
+ These two commands are only for aarch64, since it has its own protocol and
+ commands to boot xen hypervisor and Dom0, but not multiboot.
+
+ For other architectures, they are still using multiboot and module
+ commands.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2017-05-18 Fu Wei <fu.wei@linaro.org>
+
+ arm64: Add "--nounzip" option support in xen_module command
+ This patch adds "--nounzip" option support in order to
+ be compatible with the module command of multiboot on other architecture,
+ by this way we can simplify grub-mkconfig support code.
+
+ This patch also allow us to use zip compressed module(like Linux kernel
+ for Dom0).
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2017-05-18 Julien Grall <julien.grall@linaro.org>
+
+ arm64/xen_boot: Fix Xen boot using GRUB2 on AARCH64
+ Xen is currently crashing because of malformed compatible property for
+ the boot module. This is because the property string is not
+ null-terminated as requested by the ePAR spec.
+
+ Tested-by: Fu Wei <fu.wei@linaro.org>
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2017-05-18 Eric Snowberg <eric.snowberg@oracle.com>
+
+ sparc64: Close cdboot ihandle
+ The ihandle is left open with a cd-core image. This will cause a delay
+ booting grub from a virtual cdrom in a LDOM. It will also cause problems
+ as Linux boots, since it expects the ihandle to be closed during init.
+
+ Orabug: 25911275
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2017-05-09 Vladimir Serbinenko <phcoder@gmail.com>
+
+ at_keyboard: Fix falco chromebook case.
+ EC is slow, so we need few delays for it to toggle the bits correctly.
+
+ Command to enable clock and keyboard were not sent.
+
+2017-05-09 Julius Werner <jwerner@chromium.org>
+
+ coreboot: Changed cbmemc to support updated console format from coreboot.
+
+2017-05-09 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Missing parts of previous commit
+
+ arm_coreboot: Add Chromebook keyboard driver.
+
+ rk3288_spi: Add SPI driver
+
+ fdtbus: Add ability to send/receive messages on parent busses.
+
+ Fix bug on FDT nodes with compatible property
+
+2017-05-08 Vladimir Serbinenko <phcoder@gmail.com>
+
+ arm_coreboot: Support EHCI.
+
+ ehci: Split core code from PCI part.
+ On ARM often EHCI is present without PCI and just declared in device
+ tree. So splitcore from PCI part.
+
+ arm_coreboot: Support DMA.
+ This is needed to support USB and some other busses.
+
+ arm_coreboot: Support loading linux images.
+
+ arm_coreboot: Support grub-mkstandalone.
+
+ arm_coreboot: Support keyboard for vexpress.
+
+ at_keyboard: Split protocol from controller code.
+ On vexpress controller is different but protocol is the same, so reuse the
+ code.
+
+ arm-coreboot: Export FDT routines.
+ We need to use them from modules as well.
+
+ arm-coreboot: Support for vexpress timer.
+
+ Add support for device-tree-based drivers.
+
+ arm-coreboot: Start new port.
+
+ Rename uboot/datetime to dummy/datetime.
+ It's just a stub and is not UBoot-specific.
+
+ Rename uboot/halt.c to dummy/halt.c.
+ It's not U-Boot specific and it's a stub.
+
+ coreboot: Split parts that are platform-independent.
+ We currently assume that coreboot is always i386, it's no longer the case,
+ so split i386-coreboot parts from generic coreboot code.
+
+ Refactor arm-uboot code to make it genereic.
+ arm-coreboot startup code can be very similar to arm-uboot but current code has
+ U-Boot specific references. So split U-Boot part from generic part.
+
+ mkimage: Pass layout to mkimage_generate_elfXX rather than some fields.
+ This allows easier extension of this function without having too long of
+ arguments list.
+
+2017-05-03 Paulo Flabiano Smorigo <pfsmorigo@br.ibm.com>
+
+ Add Virtual LAN support.
+ This patch adds support for virtual LAN (VLAN) tagging. VLAN tagging allows
+ multiple VLANs in a bridged network to share the same physical network link
+ but maintain isolation:
+
+ http://en.wikipedia.org/wiki/IEEE_802.1Q
+
+ * grub-core/net/ethernet.c: Add check, get, and set vlan tag id.
+ * grub-core/net/drivers/ieee1275/ofnet.c: Get vlan tag id from bootargs.
+ * grub-core/net/arp.c: Add check.
+ * grub-core/net/ip.c: Likewise.
+ * include/grub/net/arp.h: Add vlantag attribute.
+ * include/grub/net/ip.h: Likewise.
+
+2017-05-03 Vladimir Serbinenko <phcoder@gmail.com>
+
+ strtoull: Fix behaviour on chars between '9' and 'a'.
+ Reported by: Aaron Miller <aaronmiller@fb.com>
+
+ Add strtoull test.
+
+ Fix shebang for termux.
+ Termux doesn't have a /bin/sh. So we needto use $SHELL.
+ Keep /bin/sh as much as possible.
+
+ Add termux path to dict.
+
+ po: Use @SHELL@ rather than /bin/sh.
+ /bin/sh might not exist.
+
+ Use $(SHELL) rather than /bin/sh.
+ /bin/sh doesn't exist under termux.
+
+ Support lseek64.
+ Android doesn't have 64-bit off_t, so use off64_t instead.
+
+ Don't retrieve fstime when it's not useful.
+
+ support busybox date.
+ Busybox date doesn't understand weekdays in -d input,
+ so strip them beforehand.
+
+ fs-tester: make sh-compatible
+
+ Remove bashisms from tests.
+ Those tests don't actually need bash. Just use common shebang.
+
+ Bump version to 2.03
+
+2017-04-25 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Increase version to 2.02.
+
+2017-04-12 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Fix remaining cases of gcc 7 fallthrough warning.
+ They are all intended, so just add the relevant comment.
+
+2017-04-04 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ Add gnulib-fix-gcc7-fallthrough.diff
+ As long as the code is not upstream, add it as explicit patch for the
+ case of gnulib refresh.
+
+2017-04-04 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ i386, x86_64, ppc: fix switch fallthrough cases with GCC7
+ In util/getroot and efidisk slightly modify exitsing comment to mostly
+ retain it but still make GCC7 compliant with respect to fall through
+ annotation.
+
+ In grub-core/lib/xzembed/xz_dec_lzma2.c it adds same comments as
+ upstream.
+
+ In grub-core/tests/setjmp_tets.c declare functions as "noreturn" to
+ suppress GCC7 warning.
+
+ In grub-core/gnulib/regexec.c use new __attribute__, because existing
+ annotation is not recognized by GCC7 parser (which requires that comment
+ immediately precedes case statement).
+
+ Otherwise add FALLTHROUGH comment.
+
+ Closes: 50598
+
+2017-04-04 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ btrfs: avoid "used uninitialized" error with GCC7
+ sblock was local and so considered new variable on every loop
+ iteration.
+
+ Closes: 50597
+
+2017-04-02 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ acpi: add missing efi_call wrapper to acpi command
+ Fixed loading of ACPI tables on EFI (side effect was apparent memory
+ corruption ranging from unpredictable behavior to system reset).
+
+ Reported by Nando Eva <nando4eva@ymail.com>
+
+2017-03-15 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Increment version to GRUB 2.02~rc2.
+
+ Use core2duo for bootcheck test on 64-bit EFI.
+ Obviously pentium2 can't run efi64.
+
+2017-03-14 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ efi: skip iPXE block device.
+ iPXE adds Simple File System Protocol to loaded image handle, as side
+ effect it also adds Block IO protocol (according to comments, to work
+ around some bugs in EDK2). GRUB assumes that every device with Block IO
+ is disk and skips network initialization entirely. But iPXE Block IO
+ implementation is just a stub which always fails for every operation
+ so cannot be used. Attempt to detect and skip such devices.
+
+ We are using media ID which iPXE sets to "iPXE" and block IO size in
+ hope that no real device would announce 1B block ...
+
+ Closes: 50518
+
+2017-03-05 phcoder <phcoder@gmail.com>
+
+ xen: Fix wrong register in relocator.
+ This fixes chainloading of some GRUB variants.
+
+2017-02-27 Vladimir Serbinenko <phcoder@gmail.com>
+
+ video_fb: Fix blue collor if using unoptimized blitter.
+ when unmapping the color what matters is the mode of source, not target.
+
+ legacy_initrd: Strip any additional arguments to initrd.
+
+2017-02-26 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ grub-fs-tester: improve squash4 tests
+ 1. Make sure files are not multiple of block size. This will ensure tail packing
+ for squash4 and may also trigger more codes paths in other filesystems.
+
+ 2. Call mksquashfs with -always-use-fragments to force tail packing.
+
+2017-02-25 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ efi: strip off final NULL from File Path in grub_efi_get_filename
+ UEFI 2.6 9.3.6.4 File Path Media Device Path says that Path Name is
+ "A NULL-terminated Path string including directory and file names".
+
+ Strip final NULL from Path Name in each File Path node when constructing
+ full path. To be on safe side, strip all of them.
+
+ Fixes failure chainloading grub from grub, when loaded grub truncates
+ image path and does not find its grub.cfg.
+
+ https://bugzilla.opensuse.org/show_bug.cgi?id=1026344
+
+ This was triggered by commit ce95549cc54b5d6f494608a7c390dba3aab4fba7;
+ before it we built Path Name without trailing NULL, and apparently all
+ other bootloaders use single File Path node, thus not exposing this bug.
+
+2017-02-24 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ squash4: fix handling of fragments and sparse files
+ 1. Do not assume block list and fragment are mutually exclusive. Squash
+ can pack file tail as fragment (unless -no-fragments is specified); so
+ check read offset and read either from block list or from fragments as
+ appropriate.
+
+ 2. Support sparse files with zero blocks.
+
+ 3. Fix fragment read - frag.offset is absolute fragment position,
+ not offset relative to ino.chunk.
+
+ Reported and tested by Carlo Caione <carlo@endlessm.com>
+
+2017-02-22 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Whitelist sparc64-ieee1275 as having no video modules.
+ ieee1275_fb is not built on sparc64 due to virtual address issues.
+
+2017-02-12 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ script: fix double free in lexer
+ yylex_destroy() already frees scanner.
+
+ Found by: Coverity scan.
+ CID: 176636
+
+2017-02-07 Vladimir Serbinenko <phcoder@gmail.com>
+
+ xen: Fix parsing of XZ kernel.
+ In case of xz, the uncompressed size is appended to xz data which confuses
+ our xz decompressor. Trim it.
+
+2017-02-07 Vladimir Serbinenko <phcoder@gmail.com>
+
+ xen: Fix handling of GRUB chainloading.
+ In case of GRUB we put remapper after domain pages and not at 0x0.
+ In this case we use max_addr to put remapper. Unfortunately we increment
+ max_addr as well in this case resulting in virt mapping mapping page
+ at old max_addr and trying to boot using new max_addr.
+
+ Closes 46014.
+
+2017-02-04 Vladimir Serbinenko <phcoder@gmail.com>
+
+ linguas: Don't skip ko.po.
+ Translation project doesn't require copyright disclaimers. They're independant
+ from us. They're responsible for their copyright story.
+
+2017-02-03 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Fix truncated checksum.h.
+
+ Regenerate checksums.h
+ Screenshots contain version, so we need new checksums.
+
+ Release 2.02-rc1.
+
+ Fix mingw compilation.
+
+2017-02-03 Daniel Kahn Gillmor <dkg@fifthhorseman.net>
+
+ documentation: Clarify documentation for special environment variable "default".
+ The current documentation for the special environment variable
+ "default" is confusing and unclear. This patch attempts to clean it
+ up.
+
+ In particular, the current documentation refers to the "number or
+ title", but then in the example it gives, the menu entries and
+ submenus all have numbers *in* their title; furthermore, there is no
+ example given about how to choose the number, or any indication about
+ whether counting is zero-indexed or 1-indexed.
+
+ Having a cleaner example and presenting all variants (numeric, title,
+ and id) should make it clearer to the user.
+
+2017-02-03 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Avoid causing kernel oops in nilfs2 test.
+ 1024-byte and 2048-byte blocks don't really work with some kernels, skip
+ them as we don't want any oops'es.
+
+ btrfs: Shorten label by one character.
+ mkfs.btrfs imposes a slightly lower limit than would be possible in btrfs.
+
+2017-02-02 Vladimir Serbinenko <phcoder@gmail.com>
+
+ grub-fs-tester: Fix mkudffs invocation.
+ With current invocation order of arguments is wrong and path is hardcoded.
+
+ grub-fs-tester: Fix fat test.
+ mkfs.vfat ignores -S when invoked on a disk, including loopback device,
+ so do an mkfs on underlying image.
+
+2017-02-02 Daniel Kiper <daniel.kiper@oracle.com>
+
+ i386/relocator: Align stack in grub_relocator64_efi relocator
+ Unified Extensible Firmware Interface Specification, Version 2.6,
+ section 2.3.4, x64 Platforms, boot services, says among others:
+ The stack must be 16-byte aligned. So, do it. Otherwise OS may
+ boot only by chance as it happens right now.
+
+2017-02-02 Vladimir Serbinenko <phcoder@gmail.com>
+
+ i386-ieee1275: Add missing bootcheck target.
+
+ bootcheck-linux-i386: Use -cpu pentium2.
+ Most modern kernels are compiled for i686, so use -cpu pentium2
+ to avoid spurious failures.
+
+ Use -fPIC with arm64 with clang.
+ Currently it doesn't work either way but with -fPIC it should work once
+ clang bug is fixed.
+
+ INSTALL: Fix mention of thumb-clang.
+
+ Fix thumb compilation with clang.
+ According to EABI only STT_FUNC has convention of lowest bit indicating
+ execution mode. R_THM_{JUMP,CALL}* relocations are assumed to be pointing
+ to thumb mode unless they use STT_FUNC.
+
+2017-02-01 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Add missing strtoull_test.c
+ It was forgotten in my local directory.
+
+ arm64: Add support for GOT and PCREL32 relocations.
+
+ mkimage: Fix memory leak.
+
+ arm/arm64: Fix improper use of start address.
+ It was used instead of loading address of current section or of entire buffer.
+
+ ia64: Fix iterator for relocation entries.
+ Don't assume relocation entry size and use sh_entsize properly.
+
+ arm: Fix trampoline generation.
+ We used the wrong pointer in this case. It worked only by accident.
+
+ Fix bootcheck-related files compilation.
+ We need -static as otherwise linker will set interpreter field and ld.so
+ is not available on our initrd's.
+ Strip all sections we don't need on binary tests.
+
+2017-01-31 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Regenerate checksum.h.
+ Screenshots checked.
+ Using unifont from http://ftp.us.debian.org/debian/pool/main/u/unifont/xfonts-unifont_7.0.06-1_all.deb.
+
+ grub-mkfont: Remove leftover debug statement.
+
+ charset: Trim away RLM and LRM.
+ They are not visible but would otherwise end up as [LRM] or [RLM] squares
+ with some fonts.
+
+ gfxterm: Fix clearing of cursor.
+ If ascent is bigger than height - 2, then we draw over character box but then
+ to clear cursor we only draw over character box. So trim ascent if necessarry.
+
+ ia64: Add support for R_IA64_GPREL64I.
+ Recent GCC generates those relocations, so we need to support them.
+
+2017-01-30 Vladimir Serbinenko <phcoder@gmail.com>
+
+ grub-module-verifier: Add mips to all_video whitelist.
+ On MIPS video is compiled-in. So all_video is empty. Whitelist it.
+
+ Fix -nopie/-nopie check.
+ We don't use lgcc_s but missing lgcc_s or another library cause test to fail.
+ So use -nostdlib.
+ We need to use -Werror to avoid warning-generated case to be accepted.
+ Clang uses -nopie rather than -no-pie. Check both and use whichever one works.
+ Additionally android clang passes -pie to the linker even though it doesn't
+ define __PIE__. So if compilation without no-pie logic fails add -nopie/-no-pie
+ even if __PIE__ is not defined.
+
+ grub-module-verifier: Ignore all_video emptiness on xen.
+ It's intentional that it's empty when no video modules
+ are available.
+
+2017-01-28 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Support arm clang 3.8 amd later.
+ clang 3.8 and later doesn't support -mllvm -use-arm-movt=0
+ whereas older clang doesn't know -mno-movt. So use
+ -mno-movt whenever possible and fallback to mllvm variant.
+
+2017-01-27 Carlo Caione <carlo@endlessm.com>
+
+ exfat: Support files over 4GiB
+ file size in grub_fat_data was 32-bit on exfat.
+
+2017-01-27 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Ensure that grub_reboot doesn't return on emu.
+ Use grub_fatal if longjmp fails.
+
+ grub_reboot is marked as noreturn so return would cause
+ a crash.
+
+2017-01-27 Vladimir Serbinenko <phcoder@gmail.com>
+
+ grub-shell: skip font copying when no font is available.
+
+ Don't use -mlong-calls on arm.
+ We don't really need it and it's flaky and creates
+ bogus symbols with clang.
+
+ configure: Disable movw/movt with clang.
+ Those relocations are not compatible with PE and also
+ not compatible with custom uboot relocator.
+ Disable them.
+
+ grub-fs-tester: Delete directory once we're done.
+
+ grub-fs-tester: Accomodate for slower systems.
+ fstime can be more different with xz squashfs.
+ Allow difference up to 3 seconds.
+ This code is ugly now but rewriting it now is not on the
+ table.
+
+ grub-fs-tester: Accomodate for testing in proot containers.
+ proot creates hidden files with .proot prefix and name
+ derived from real file name. So decrease file name length
+ and path depth. For some reason depth 85 also results in
+ undeleteable directory, so use 84 instead of 85.
+
+2017-01-24 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ osdep/linux: handle autofs entries in /proc/self/mountinfo
+ These entries have placeholder for device name and so are useless for our
+ purpose. grub failed with something like
+
+ grub-install: error: failed to get canonical path of `systemd-1'.
+
+ When we see autofs entry, record it (to keep parent-child relationship) but
+ continue to look for real mount. If it is found, we process it as usual. If
+ only autofs entry exists, attempt to trigger mount by opening mount point
+ and retry. Mount point itself is then kept open to avoid timeout.
+
+ Recent systemd is by default using automount for /boot/efi so this should
+ become more popular problem on EFI systems.
+
+ Closes: 49942
+
+2017-01-08 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ linux: fix "vga=XX deprecated" warning for text mode
+ Arguments were in reverse order which resulted in
+
+ text is deprecated. Use set gfxpayload=vga=0 before linux command instead.
+
+2016-12-22 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ configure: fix check for sys/sysmacros.h under glibc 2.25+
+ glibc 2.25 still includes sys/sysmacros.h in sys/types.h but also emits
+ deprecation warning. So test for sys/types.h succeeds in configure but later
+ compilation fails because we use -Werror by default.
+
+ While this is fixed in current autoconf GIT, we really cannot force everyone
+ to use bleeding edge (that is not even released right now). So run test under
+ -Werror as well to force proper detection.
+
+ This should have no impact on autoconf 2.70+ as AC_HEADER_MAJOR in this version
+ simply checks for header existence.
+
+ Reported and tested by Khem Raj <raj.khem@gmail.com>
+
+2016-12-22 Michael Chang <mchang@suse.com>
+
+ Fix fwpath in efi netboot
+ The path returned by grub_efi_net_config has already been stripped for the
+ directory part extracted from cached bootp packet. We should just return the
+ result to avoild it be stripped again.
+
+ It fixed the problem that grub.efi as NBP image always looking for grub.cfg and
+ platform directory in upper folder rather than current one it gets loaded while
+ $prefix is empty. The behavior is inconsistent with other architecture and how
+ we would expect empty $prefix going to be in general.
+
+ The only exception to the general rule of empty $prefix is that when loaded
+ from platform directory itself, the platform part is stripped thus upper folder
+ is used for looking up files. It meets the case for how grub-mknetdir lay out
+ the files under tftp root directory, but also hide away this issue to be
+ identified as it appears to be just works.
+
+ Also fix possible memory leak by moving grub_efi_get_filename() call after
+ grub_efi_net_config().
+
+2016-12-15 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ efi: properly terminate filepath with NULL in chainloader
+ EFI File Path Media Device Path is defined as NULL terminated string;
+ but chainloader built file paths without final NULL. This caused error
+ with Secure Boot and Linux Foundation PreLoader on Acer with InsydeH20 BIOS.
+ Apparently firmware failed verification with EFI_INVALID_PARAMETER which is
+ considered fatal error by PreLoader.
+
+ Reported and tested by Giovanni Santini <itachi.sama.amaterasu@gmail.com>
+
+2016-12-14 Magnus Granberg <zorry@gentoo.org>
+
+ configure: add check for -no-pie if the compiler default to -fPIE
+ When Grub is compile with gcc 6.1 that have --enable-defult-pie set.
+ It fail with.
+ -ffreestanding -m32 -Wl,-melf_i386 -Wl,--build-id=none -nostdlib -Wl,-N -Wl,-r,-d -
+ o trig.module trig_module-trigtables.o
+ grep 'MARKER' gcry_whirlpool.marker.new > gcry_whirlpool.marker; rm -f
+ gcry_whirlpool.marker.new
+ /usr/lib/gcc/x86_64-pc-linux-gnu/6.1.0/../../../../x86_64-pc-linux-gnu/bin/ld: -r and -
+ shared may not be used together
+ collect2: error: ld returned 1 exit status
+ Makefile:26993: recipe for target 'trig.module' failed
+
+ Check that compiler supports -no-pie and add it to linker flags.
+
+2016-12-14 Stanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com>
+
+ ofnet: implement the receive buffer
+ get_card_packet() from ofnet.c allocates a netbuff based on the device's MTU:
+
+ nb = grub_netbuff_alloc (dev->mtu + 64 + 2);
+
+ In the case when the MTU is large, and the received packet is
+ relatively small, this leads to allocation of significantly more memory,
+ than it's required. An example could be transmission of TFTP packets
+ with 0x400 blksize via a network card with 0x10000 MTU.
+
+ This patch implements a per-card receive buffer in a way similar to efinet.c,
+ and makes get_card_packet() allocate a netbuff of the received data size.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2016-12-14 Stanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com>
+
+ ofnet: move the allocation of the transmit buffer into a function
+ In the current code search_net_devices() uses the "alloc-mem" command
+ from the IEEE1275 User Interface for allocation of the transmit buffer
+ for the case when GRUB_IEEE1275_FLAG_VIRT_TO_REAL_BROKEN is set.
+
+ I don't have hardware where this flag is set to verify if this
+ workaround is still needed. However, further changes to ofnet will
+ require to execute this workaround one more time. Therefore, to
+ avoid possible duplication of code I'm moving this piece of
+ code into a function.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2016-11-24 Alexander Graf <agraf@suse.de>
+
+ efi: Move fdt helper into own file
+ We only support FDT files with EFI on arm and arm64 systems, not
+ on x86. So move the helper that finds a prepopulated FDT UUID
+ into its own file and only build it for architectures where it
+ also gets called.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2016-11-22 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ NEWS updates
+
+2016-11-22 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ bootp: export next server IP as environment variable
+ Network boot autoconfiguration sets default server to next server IP
+ (siaddr) from BOOTP/DHCP reply, but manual configuration using net_bootp
+ exports only server name. Unfortunately semantic of server name is not
+ clearly defined. BOOTP RFC 951 defines it only for client request, and
+ DHCP RFC 1541 only mentions it, without any implied usage. It looks like
+ this field is mostly empty in server replies.
+
+ Export next server IP as net_<interface>_next_server variable. This allows
+ grub configuration script to set $root/$prefix based on information obtained
+ by net_bootp.
+
+ Reported and tested by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
+ Cc: nikunj@linux.vnet.ibm.com
+
+ v2: change variable name to net_<interface>_next_server as discussed on the list
+
+2016-11-22 Aaro Koskinen <aaro.koskinen@iki.fi>
+
+ configure.ac: don't require build time grub-mkfont on powerpc-ieee1275
+ Don't require build time grub-mkfont on powerpc-ieee1275.
+
+2016-11-14 Dirk Mueller <dmueller@suse.com>
+
+ grub-mknetdir: Add support for ARM64 EFI
+
+2016-11-12 Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
+
+ .gitignore: Add grub-core/build-grub-module-verifier
+
+2016-11-10 Alexander Graf <agraf@suse.de>
+
+ arm efi: Use fdt from firmware when available
+ If EFI is nice enough to pass us an FDT using configuration tables on 32bit
+ ARM, we should really try and make use of it.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2016-11-10 Alexander Graf <agraf@suse.de>
+
+ arm64: Move firmware fdt search into global function
+ Searching for a device tree that EFI passes to us via configuration tables
+ is nothing architecture specific. Move it into generic code.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2016-11-05 Corey Hickey <bugfood-ml@fatooh.org>
+
+ fix detection of non-LUKS CRYPT
+ grub_util_get_dm_abstraction() does a string comparison of insufficient
+ length. When using a UUID such as "CRYPT-PLAIN-sda6_crypt", the function
+ returns GRUB_DEV_ABSTRACTION_LUKS.
+
+ This results in the error:
+ ./grub-probe: error: disk `cryptouuid/sda6_crypt' not found.
+
+ This appears to be a copy/paste error introduced in:
+ a10e7a5a8918bea6e2632055129fa9b516fe965a
+
+ The bug was (apparently) latent until revealed by:
+ 3bca85b4184f74995a7cc2791e432173fde26d34
+
+2016-10-27 Juergen Gross <jgross@suse.com>
+
+ xen: add capability to load p2m list outside of kernel mapping
+ Modern pvops linux kernels support a p2m list not covered by the
+ kernel mapping. This capability is flagged by an elf-note specifying
+ the virtual address the kernel is expecting the p2m list to be mapped
+ to.
+
+ In case the elf-note is set by the kernel don't place the p2m list
+ into the kernel mapping, but map it to the given address. This will
+ allow to support domains with larger memory, as the kernel mapping is
+ limited to 2GB and a domain with huge memory in the TB range will have
+ a p2m list larger than this.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2016-10-27 Juergen Gross <jgross@suse.com>
+
+ xen: modify page table construction
+ Modify the page table construction to allow multiple virtual regions
+ to be mapped. This is done as preparation for removing the p2m list
+ from the initial kernel mapping in order to support huge pv domains.
+
+ This allows a cleaner approach for mapping the relocator page by
+ using this capability.
+
+ The interface to the assembler level of the relocator has to be changed
+ in order to be able to process multiple page table areas.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2016-10-27 Juergen Gross <jgross@suse.com>
+
+ xen: add capability to load initrd outside of initial mapping
+ Modern pvops linux kernels support an initrd not covered by the initial
+ mapping. This capability is flagged by an elf-note.
+
+ In case the elf-note is set by the kernel don't place the initrd into
+ the initial mapping. This will allow to load larger initrds and/or
+ support domains with larger memory, as the initial mapping is limited
+ to 2GB and it is containing the p2m list.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2016-10-27 Juergen Gross <jgross@suse.com>
+
+ xen: factor out allocation of page tables into separate function
+ Do the allocation of page tables in a separate function. This will
+ allow to do the allocation at different times of the boot preparations
+ depending on the features the kernel is supporting.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2016-10-27 Juergen Gross <jgross@suse.com>
+
+ xen: factor out allocation of special pages into separate function
+ Do the allocation of special pages (start info, console and xenbus
+ ring buffers) in a separate function. This will allow to do the
+ allocation at different times of the boot preparations depending on
+ the features the kernel is supporting.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2016-10-27 Juergen Gross <jgross@suse.com>
+
+ xen: factor out p2m list allocation into separate function
+ Do the p2m list allocation of the to be loaded kernel in a separate
+ function. This will allow doing the p2m list allocation at different
+ times of the boot preparations depending on the features the kernel
+ is supporting.
+
+ While at this remove superfluous setting of first_p2m_pfn and
+ nr_p2m_frames as those are needed only in case of the p2m list not
+ being mapped by the initial kernel mapping.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2016-10-27 Juergen Gross <jgross@suse.com>
+
+ xen: synchronize xen header
+ Get actual version of include/xen/xen.h from the Xen repository in
+ order to be able to use constants defined there.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2016-10-27 Juergen Gross <jgross@suse.com>
+
+ xen: add elfnote.h to avoid using numbers instead of constants
+ Various features and parameters of a pv-kernel are specified via
+ elf notes in the kernel image. Those notes are part of the interface
+ between the Xen hypervisor and the kernel.
+
+ Instead of using num,bers in the code when interpreting the elf notes
+ make use of the header supplied by Xen for that purpose.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2016-10-27 Juergen Gross <jgross@suse.com>
+
+ xen: reduce number of global variables in xen loader
+ The loader for xen paravirtualized environment is using lots of global
+ variables. Reduce the number by making them either local or by putting
+ them into a single state structure.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2016-10-27 Juergen Gross <jgross@suse.com>
+
+ xen: avoid memleaks on error
+ When loading a Xen pv-kernel avoid memory leaks in case of errors.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2016-10-27 Juergen Gross <jgross@suse.com>
+
+ xen: make xen loader callable multiple times
+ The loader for xen paravirtualized environment isn't callable multiple
+ times as it won't free any memory in case of failure.
+
+ Call grub_relocator_unload() as other modules do it before allocating
+ a new relocator or when unloading the module.
+
+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
+
+2016-10-27 Daniel Kiper <daniel.kiper@oracle.com>
+
+ multiboot2: Add support for relocatable images
+ Currently multiboot2 protocol loads image exactly at address specified in
+ ELF or multiboot2 header. This solution works quite well on legacy BIOS
+ platforms. It is possible because memory regions are placed at predictable
+ addresses (though I was not able to find any spec which says that it is
+ strong requirement, so, it looks that it is just a goodwill of hardware
+ designers). However, EFI platforms are more volatile. Even if required
+ memory regions live at specific addresses then they are sometimes simply
+ not free (e.g. used by boot/runtime services on Dell PowerEdge R820 and
+ OVMF). This means that you are not able to just set up final image
+ destination on build time. You have to provide method to relocate image
+ contents to real load address which is usually different than load address
+ specified in ELF and multiboot2 headers.
+
+ This patch provides all needed machinery to do self relocation in image code.
+ First of all GRUB2 reads min_addr (min. load addr), max_addr (max. load addr),
+ align (required image alignment), preference (it says which memory regions are
+ preferred by image, e.g. none, low, high) from multiboot_header_tag_relocatable
+ header tag contained in binary (at this stage load addresses from multiboot2
+ and/or ELF headers are ignored). Later loader tries to fulfill request (not only
+ that one) and if it succeeds then it informs image about real load address via
+ multiboot_tag_load_base_addr tag. At this stage GRUB2 role is finished. Starting
+ from now executable must cope with relocations itself using whole static and
+ dynamic knowledge provided by boot loader.
+
+ This patch does not provide functionality which could do relocations using
+ ELF relocation data. However, I was asked by Konrad Rzeszutek Wilk and Vladimir
+ 'phcoder' Serbinenko to investigate that thing. It looks that relevant machinery
+ could be added to existing code (including this patch) without huge effort.
+ Additionally, ELF relocation could live in parallel with self relocation provided
+ by this patch. However, during research I realized that first of all we should
+ establish the details how ELF relocatable image should look like and how it should
+ be build. At least to build proper test/example files.
+
+ So, this patch just provides support for self relocatable images. If ELF file
+ with relocs is loaded then GRUB2 complains loudly and ignores it. Support for
+ such files will be added later.
+
+ This patch was tested with Xen image which uses that functionality. However, this Xen
+ feature is still under development and new patchset will be released in about 2-3 weeks.
+
+ Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
+
+2016-10-27 Daniel Kiper <daniel.kiper@oracle.com>
+
+ multiboot2: Do not pass memory maps to image if EFI boot services are enabled
+ If image requested EFI boot services then skip multiboot2 memory maps.
+ Main reason for not providing maps is because they will likely be
+ invalid. We do a few allocations after filling them, e.g. for relocator
+ needs. Usually we do not care as we would have finished boot services.
+ If we keep boot services then it is easier/safer to not provide maps.
+ However, if image needs memory maps and they are not provided by bootloader
+ then it should get itself just before ExitBootServices() call.
+
+ Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+ Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
+
+2016-10-27 Daniel Kiper <daniel.kiper@oracle.com>
+
+ multiboot2: Add tags used to pass ImageHandle to loaded image
+ Add tags used to pass ImageHandle to loaded image if requested.
+ It is used by at least ExitBootServices() function.
+
+ Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+ Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
+
+2016-10-27 Daniel Kiper <daniel.kiper@oracle.com>
+
+ i386/relocator: Add grub_relocator64_efi relocator
+ Add grub_relocator64_efi relocator. It will be used on EFI 64-bit platforms
+ when multiboot2 compatible image requests MULTIBOOT_TAG_TYPE_EFI_BS. Relocator
+ will set lower parts of %rax and %rbx accordingly to multiboot2 specification.
+ On the other hand processor mode, just before jumping into loaded image, will
+ be set accordingly to Unified Extensible Firmware Interface Specification,
+ Version 2.4 Errata B, section 2.3.4, x64 Platforms, boot services. This way
+ loaded image will be able to use EFI boot services without any issues.
+
+ Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+ Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
+
+2016-10-18 Sakar Arora <Sakar.Arora@nxp.com>
+
+ net/ip: Fix limit_time calculation in freeing old fragments
+ limit_time underflows when current time is less than 90000ms.
+ This causes packet fragments received during this time, i.e.,
+ till 90000ms pass since timer init, to be rejected.
+
+ Hence, set it to 0 if its less than 90000.
+
+2016-09-28 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ asm-tests/i386-pc: Check that movl is 5 bytes.
+ LLVM 3.9 now emits short form of jump instructions, but it is still using
+ 32 bit addresses for some movl instructions. Fortunately it was caught early:
+
+ clang ... boot/i386/pc/boot.S
+ clang -cc1as: fatal error: error in backend: invalid .org offset '440' (at offset '441')
+
+ Add additional check to catch it during configure run and force -no-integrated-as.
+
+ Closes: 49200
+
+ More details in
+ https://lists.gnu.org/archive/html/grub-devel/2015-02/msg00099.html
+ https://llvm.org/bugs/show_bug.cgi?id=22662
+
+2016-08-13 Pete Batard <pete@akeo.ie>
+
+ Add missing va_end() to xasprintf() in grub-emu.
+
+2016-07-27 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ at_keyboard: fix numpad "0" and "." mapping
+ Reported for set 1 by fgndevelop <fgndevelop@posteo.org>. Apparently
+ set 2 was reversed too.
+
+2016-07-26 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ dns: fix buffer overflow for data->addresses in recv_hook
+ We may get more than one response before exiting out of loop in
+ grub_net_dns_lookup, but buffer was allocated for the first response only,
+ so storing answers from subsequent replies wrote past allocated size.
+ We never really use more than the very first address during lookup so there
+ is little point in collecting all of them. Just quit early if we already have
+ some reply.
+
+ Code needs serious redesign to actually collect multiple answers
+ and select the best fit according to requested type (IPv4 or IPv6).
+
+ Reported and tested by Michael Chang <mchang@suse.com>
+
+2016-07-26 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ xfs: accept filesystem with meta_uuid
+ XFS V5 stores UUID in metadata and compares them with superblock UUID.
+ To allow changing of user-visible UUID it stores original value in new
+ superblock field (meta_uuid) and sets incompatible flag to indicate that
+ new field must be used to verify metadata. Our driver currently does not
+ check metadata UUID so simply accept such filesystem.
+
+ Reported-By: Marcos Mello <marcosfrm@outlook.com>
+ Reviewd by Jan Kara <jack@suse.cz>
+
+2016-05-03 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ net: translate pxe prefix to tftp when checking for self-load
+ Commit ba218c1 missed legacy pxe and pxe: prefixes which are
+ translated to tftp, so comparison failed.
+
+2016-04-30 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ net: reset net->stall in grub_net_seek_real
+ If we open new connection, we need to reset stall indication, otherwise
+ nothing will ever be polled (low level code rely on this field being
+ zero when establishing connection).
+
+2016-04-30 Stefan Fritsch <sf@sfritsch.de>
+
+ http: reset EOF indication in http_seek
+ Otherwise next read will stop polling too early due to stale EOF
+ indicator, returning incomplete data to caller.
+
+2016-04-24 Mike Gilbert <floppym@gentoo.org>
+
+ build: Use AC_HEADER_MAJOR to find device macros
+ Depending on the OS/libc, device macros are defined in different
+ headers. This change ensures we include the right one.
+
+ sys/types.h - BSD
+ sys/mkdev.h - Sun
+ sys/sysmacros.h - glibc (Linux)
+
+ glibc currently pulls sys/sysmacros.h into sys/types.h, but this may
+ change in a future release.
+
+ https://sourceware.org/ml/libc-alpha/2015-11/msg00253.html
+
+2016-04-09 Michael Chang <mchang@suse.com>
+
+ http: fix superfluous null line in range request header
+ At least the apache sever is very unhappy with that extra null line and will
+ take more than ten seconds in responding to each range request, which slows
+ down a lot the entire http file transfer process or even time out.
+
+2016-03-22 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ configure: set -fno-pie together with -fno-PIE
+ OpenBSD 5.9 apparently defaults to -fpie. We use -fno-PIE when appropriate
+ already, but that is not enough - it does not turn off -fpie.
+
+ Actually check for -fPIE is not precise enough. __PIE__ is set for both
+ -fpie and -fPIE but with different values. As far as I can tell, both
+ options were introduced at the same time, so both should always be supported.
+
+ This fixes compilation on OpenBSD 5.9 which otherwise created insanely big
+ lzma_decompress.img.
+
+ Reported, suggested and tested by: Jiri B <jirib@devio.us>
+
+2016-03-20 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ bootp: check that interface is not NULL in configure_by_dhcp_ack
+ grub_net_add_addr may fail with OOM and we use returned interface
+ later without any checks.
+
+2016-03-19 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ bootp: fix memory leak in grub_cmd_dhcpopt
+
+2016-03-15 Aaron Luft <aluft@lifesize.com>
+
+ Remove the variable oldname which is attempting to free stack space.
+ Historically this variable hold previous value of filename that
+ had to be freed if allocated previously. Currently this branch
+ is entered only if filename was not allocated previously so it
+ became redundant. It did not cause real problems because grub_free
+ was not called, but code is confusing and causes compilation error
+ in some cases.
+
+2016-03-13 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ Makefile.util.def: add $LIBINTL to grub-macbless flags
+ Fixes compilation on OpenBSD 5.9.
+
+ Reported by Jiri B <jirib@devio.us>
+
+2016-03-11 Robert Marshall <rmarshall@redhat.com>
+
+ Failed config now returns exit code (#1252311)
+ Grub would notify the user if the new config was invalid, however, it
+ did not exit properly with exit code 1. Added the proper exit code.
+
+ Resolves: rhbz#1252311
+
+2016-03-11 Michael Chang <mchang@suse.com>
+
+ xen_file: Fix invalid payload size
+
+2016-03-10 Vladimir Serbinenko <phcoder@gmail.com>
+
+ multiboot2: Remove useless GRUB_PACKED
+ Reported by: Daniel Kiper
+
+2016-03-06 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ 20_linux_xen: fix test for GRUB_DEVICE
+ Same fix as in 082bc9f.
+
+2016-03-06 Mike Gilbert <floppym@gentoo.org>
+
+ 10_linux: Fix grouping of tests for GRUB_DEVICE
+ Commit 7290bb562 causes GRUB_DISABLE_LINUX_UUID to be ignored due to
+ mixing of || and && operators. Add some parens to help with that.
+
+2016-02-28 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ NEWS update
+
+2016-02-28 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Release 2.02~beta3
+
+ grub_arch_sync_dma_caches: Accept volatile address
+
+2016-02-27 Leif Lindholm <leif.lindholm@linaro.org>
+
+ efidisk: Respect block_io_protocol buffer alignment
+ Returned from the OpenProtocol operation, the grub_efi_block_io_media
+ structure contains the io_align field, specifying the minimum alignment
+ required for buffers used in any data transfers with the device.
+
+ Make grub_efidisk_readwrite() allocate a temporary buffer, aligned to
+ this boundary, if the buffer passed to it does not already meet the
+ requirements.
+
+ Also sanity check the io_align field in grub_efidisk_open() for
+ power-of-two-ness and bail if invalid.
+
+2016-02-27 Vladimir Serbinenko <phcoder@gmail.com>
+
+ usbtrans: Fix memory coherence and use-after-free.
+
+ ehci: Fix memory coherence
+ This is a no-op on x86 but necessarry on ARM and may be necessarry on MIPS.
+
+ arm-uboot: Make self-relocatable to allow loading at any address
+
+ Allow _start == 0 with relocatable images
+
+2016-02-27 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Provide __bss_start and _end symbols in grub-mkimage.
+ For this ensure that all bss sections are merged.
+
+ We need this to correctly prelink non-PE relocatable images.
+
+2016-02-27 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Encapsulate image layout into a separate structure.
+ Currently we pass around a lot of pointer. Instead put all relevant data
+ into one structure.
+
+ mkimagexx: Split PE and generic part for relocations.
+ As a preparation for U-Boot relocations, split emitting PE-relocations
+ from parsing source ELF-relocations.
+
+ mkimage.c: Split into separate files.
+ util/grub-mkimagexx.c is included in a special way into mkimage.c.
+ Interoperation between defines makes this very tricky. Instead
+ just have a clean interface and compile util/grub-mkimage*.c separately
+ from mkimage.c
+
+ bsd: Ensure that kernel is loaded before loading module.
+ kernel_type may be set to the type of failed kernel. This patching-up is
+ easier than to reflow kernel loading routines.
+
+ cat: Don't switch terminal mode when there is nothing to highlight.
+ This just pollutes serial console.
+
+ Use console rather than serial_efi0 on arm64-efi in tests
+
+2016-02-27 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ efidisk: fix misplaced parenthesis in b00e4c2
+
+2016-02-26 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ efidisk: prevent errors from diskfilter scan of removable drives
+ Map EFI_NO_MEDIA to GRUB_ERR_OUT_OF_RANGE that is ignored by diskfilter. This
+ actually matches pretty close (we obviously attempt to read outside of media)
+ and avoids adding more error codes.
+
+ This affects only internally initiated scans. If read/write from removable is
+ explicitly requested, we still return an error and text explanation is more
+ clear for user than generic error.
+
+ Reported and tested by Andreas Loew <Andreas.Loew@gmx.net>
+
+2016-02-26 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Regenerate checksums
+
+ Makefile: Don't delete default_payload.elf if it doesn't exist.
+
+2016-02-25 Josef Bacik <jbacik@fb.com>
+
+ net: fix ipv6 routing
+ ipv6 routing in grub2 is broken, we cannot talk to anything outside our local
+ network or anything that doesn't route in our global namespace. This patch
+ fixes this by doing a couple of things
+
+ 1) Read the router information off of the router advertisement. If we have a
+ router lifetime we need to take the source address and create a route from it.
+
+ 2) Changes the routing stuff slightly to allow you to specify a gateway _and_ an
+ interface. Since the router advertisements come in on the link local address we
+ need to associate it with the global address on the card. So when we are
+ processing the router advertisement, either use the SLAAC interface we create
+ and add the route to that interface, or loop through the global addresses we
+ currently have on our interface and associate it with one of those addresses.
+ We need to have a special case here for the default route so that it gets used,
+ we do this by setting the masksize to 0 to mean it encompasses all networks.
+ The routing code will automatically select the best route so if there is a
+ closer match we will use that.
+
+ With this patch I can now talk to ipv6 addresses outside of my local network.
+ Thanks,
+
+2016-02-24 Vladimir Serbinenko <phcoder@gmail.com>
+
+ ieee1275: fix signed comparison
+
+2016-02-23 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ search: actually skip floppy with --no-floppy
+ grub_device_iterate() ignores device when iterator returns 1, not 0.
+
+ Reported by Carlos E. R. <robin.listas@telefonica.net>
+
+2016-02-23 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ multiboot2: zero reserved field in memory map
+ Documentation says, bootloader should set reserved field to zero.
+
+ Reported by Wink Saville <wink@saville.com>
+
+2016-02-22 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Improve EHCI logging
+ Add dprintf's on common error paths and remove some entries which are too
+ noisy.
+
+ usb_keyboard: Remove useless include
+ This prevents non-PCI machines from having USB.
+
+ Refresh before abort
+ This ensures that abort message is actually visible to the user.
+
+2016-02-22 Eric Snowberg <eric.snowberg@oracle.com>
+
+ ieee1275: prevent buffer over-read
+ Prevent buffer over-read in grub_machine_mmap_iterate. This was
+ causing phys_base from being calculated properly. This then
+ caused the wrong value to be placed in ramdisk_image within
+ struct linux_hdrs. Which prevented the ramdisk from loading on
+ boot.
+
+ Newer SPARC systems contain more than 8 available memory entries.
+
+ For example on a T5-8 with 2TB of memory, the memory layout could
+ look like this:
+
+ T5-8 Memory
+ reg 00000000 30000000 0000003f b0000000
+ 00000800 00000000 00000040 00000000
+ 00001000 00000000 00000040 00000000
+ 00001800 00000000 00000040 00000000
+ 00002000 00000000 00000040 00000000
+ 00002800 00000000 00000040 00000000
+ 00003000 00000000 00000040 00000000
+ 00003800 00000000 00000040 00000000
+ available 00003800 00000000 0000003f ffcae000
+ 00003000 00000000 00000040 00000000
+ 00002800 00000000 00000040 00000000
+ 00002000 00000000 00000040 00000000
+ 00001800 00000000 00000040 00000000
+ 00001000 00000000 00000040 00000000
+ 00000800 00000000 00000040 00000000
+ 00000000 70000000 0000003f 70000000
+ 00000000 6eef8000 00000000 00002000
+ 00000000 30400000 00000000 3eaf6000
+ name memory
+
+2016-02-22 Thomas Huth <thuth@redhat.com>
+
+ menu_entry: Disable cursor during update_screen()
+ When running grub in a VGA console of a KVM pseries guest on PowerPC,
+ you can see the cursor sweeping over the whole line when entering a
+ character in editor mode. This is visible because grub always refreshes
+ the whole line when entering a character in editor mode, and drawing
+ characters is quite a slow operation with the firmware used for the
+ powerpc pseries guests (SLOF).
+ To avoid this ugliness, the cursor should be disabled when refreshing
+ the screen contents during update_screen().
+
+2016-02-17 Vladimir Serbinenko <phcoder@gmail.com>
+
+ default_payload.elf: Always rebuild and remove before build.
+ It's difficult to know all dependencies. Since it's manual and cheap
+ target anyway, simply always rebuild it.
+
+ default_payload.elf: Include password_pbkdf2.
+ Withoout this module we may end up in a system where no password is
+ accepted.
+
+ default_payload.elf: Add modules from $(EXTRA_PAYLOAD_MODULES).
+ This allows coreboot building system to add extra modules depending
+ on user config.
+
+ mm: Avoid integer overflow.
+
+ Remove -Wno-maybe-uninitialized as it may not be present.
+
+ Fix warnings when compiling with -O3
+
+2016-02-14 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Add wbinvd around bios call.
+ Via C3 has problems with cache coherency when transitioning between the modes,
+ so flush it around bios calls.
+
+2016-02-12 Eric Snowberg <eric.snowberg@oracle.com>
+
+ OBP available region contains grub. Start at grub_phys_end.
+ This prevents a problem where grub was being overwritten since
+ grub_phys_start does not start at a zero offset within the memory
+ map.
+
+2016-02-12 Andreas Freimuth <andreas_freimuth@web.de>
+
+ Add Thinkpad T410s button cmos address.
+
+2016-02-12 Vladimir Serbinenko <phcoder@gmail.com>
+
+ TODO: Remove obsolete link
+
+2016-02-12 Toomas Soome <tsoome@me.com>
+
+ lz4: Fix pointer overflow
+
+2016-02-12 Vladimir Serbinenko <phcoder@gmail.com>
+
+ grub-shell: Update 32-bit OVMF binary name.
+
+2016-02-12 Daniel Kiper <daniel.kiper@oracle.com>
+
+ relocator: Fix integer underflow.
+
+2016-02-12 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Change -v to -V for version of shell utils.
+
+ xnu: Add new kernel path to autoconfig.
+
+ arm64: Use cpu timer for timekeeping.
+
+ powerpc: Trim header in tests.
+
+ default_payload: Include syslinuxcfg, all filesystems and xnu.
+
+ xnu: Supply random seed.
+ Now we're able to load kernels up to El Capitan.
+
+ Add RNG module.
+
+ yylex: use grub_fatal for exit.
+ lexer calls yylex_fatal on fatal internal errors. yylex_fatal itself is
+ declared as noreturn and calls exit. Returning from noreturn function has
+ unpredictable consequences.
+
+ printf: Fix and test %% behaviour in presence of subsequenbt args.
+
+ Split pmtimer wait and tsc measurement from pmtimer tsc calibration.
+
+ Make grub_cpu_is_tsc_supported generally available.
+
+ Make grub_acpi_find_fadt accessible generically
+
+ Make unaligned types public.
+ This simplifies code which has to handle those types.
+
+ Fix emu compilation error on arm.
+
+2016-02-11 Vladimir Serbinenko <phcoder@gmail.com>
+
+ xnu: Include relocated EFI in heap size.
+
+ xnu: supply ramsize to the kernel.
+ Without this info recent kernels crash as they allocate no heap.
+
+2016-02-03 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ support modules without symbol table
+ all_video module does not have any code or data and exists solely for
+ .moddeps section to pull in dependencies. This makes all symbols unneeded.
+
+ While in current binutils (last released version as of this commit is 2.26)
+ ``strip --strip-unneeded'' unintentionally adds section symbols for each
+ existing section, this behavior was considered a bug and changed in commit
+ 14f2c699ddca1e2f706342dffc59a6c7e23e844c to completely strip symbol table
+ in this case.
+
+ Older binutils (verified with 2.17) and some other toolchains (at least
+ elftoolchain r3223M), both used in FreeBSD, remove symbol table in all_video
+ as well.
+
+ Relax run-time check and do not return error for modules without symbol table.
+ Add additional checks to module verifier to make sure such modules
+
+ a) have non-empty .moddeps section. Without either externally visible symbols
+ or .moddeps modules are completely useless and should not be built.
+
+ b) do not have any relocations.
+
+ Closes: 46986
+
+ v2: add run-time check for empty symbol table if relocations are present as
+ suggested by Vladimir.
+
+2016-02-01 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ 10_linux: avoid multi-device root= kernel argument
+ If root filesystem is multidev btrfs, do not attempt to pass all devices as
+ kernel root= argument. This results in splitting command line in GRUB due to
+ embedded newline and even if we managed to quote it, kernel does not know how
+ to interpret it anyway. Multidev btrfs requires user space device scanning,
+ so passing single device would not work too.
+
+ This still respects user settings GRUB_DISABLE_LINUX_UUID. Not sure what we
+ should do in this case.
+
+ Closes: 45709
+
+2016-01-22 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Error out if mtools invocation fails.
+
+ arm64: Add support for relocations needed for linaro gcc
+
+ efiemu: Fix compilation failure
+
+ Document cpuid -p
+
+2016-01-22 Robert Elliott <elliott@hpe.com>
+
+ efiemu: Handle persistent RAM and unknown possible future additions.
+
+2016-01-22 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Document expr1 expr2 syntax for test command
+
+2016-01-22 Michael Chang <mchang@suse.com>
+
+ Restore terminal settings on grub-emu exit.
+
+2016-01-22 Vladimir Serbinenko <phcoder@gmail.com>
+
+ xen_boot: Remove obsolete module type distinctions.
+
+ arm: Ignore qemu clock bug
+
+ i386-ieee1275: Increase maximum heap size to accomodate highres graphi tests
+
+2016-01-20 Colin Watson <cjwatson@ubuntu.com>
+
+ Remove pragmas related to -Wunreachable-code
+ -Wunreachable-code has been a no-op since GCC 4.5; GRUB hasn't been
+ compiled with it since 2012; and GCC 6 produces "error:
+ '-Wunreachable-code' is not an option that controls warnings" for these.
+
+ Fixes Debian bug #812047.
+
+2016-01-16 Colin Watson <cjwatson@ubuntu.com>
+
+ loader/bsd: Fix signed/unsigned comparison
+
+ ahci, ehci: Fix typos
+
+2016-01-16 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ grub-probe: fix memory leak
+ Found by: Coverity scan.
+ CID: 73783
+
+2016-01-16 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ tftp: fix memory leaks in open
+ If protocol open fails, file is immediately freed, so data was leaked.
+
+ Found by: Coverity scan.
+ CID: 96659
+
+2016-01-16 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ tcp: fix memory leaks
+ Found by: Coverity scan.
+ CID: 96639, 96647
+
+ net: fix memory leaks
+ Found by: Coverity scan.
+ CID: 96638, 96648
+
+ legacycfg: fix memory leaks and add NULL check
+ Memory leaks found by Coverity scan.
+ CID: 96642, 96645
+
+2016-01-15 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ loader: Unintended sign extension
+ CID: 96707, 96699, 96693, 96691, 96711, 96709, 96708, 96703, 96702,
+ 96700, 96698, 96696, 96695, 96692, 96710, 96705
+
+2016-01-12 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ script: fix memory leak
+ Found by: Coverity scan.
+ CID: 96637
+
+ normal: fix memory leak
+ Found by: Coverity scan.
+ CID: 96641, 96670, 96667
+
+ xnu: fix memory leak
+ Found by: Coverity scan.
+ CID: 96663
+
+ truecrypt: fix memory leak
+ Found by: Coverity scan.
+ CID: 156611
+
+ gfxmenu: fix memory leak
+ Found by: Coverity scan.
+ CID: 96657
+
+ efiemu: fix memory leak
+ Found by: Coverity scan.
+ CID: 156610
+
+ efidisk: fix memory leak
+ Found by: Coverity scan.
+ CID: 96644
+
+ verify: fix memory leak
+ Found by: Coverity scan.
+ CID: 96643
+
+ password_pbkdf2: fix memory leak
+ Found by: Coverity scan.
+ CID: 96656
+
+ parttool: fix memory leak
+ Found by: Coverity scan.
+ CID: 96652
+
+2016-01-12 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ nativedisk: fix memory leak
+ Based on Coverity scan.
+ CID: 96660
+
+ Extended to also cover other error return places.
+
+2016-01-12 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ acpi: fix memory leak
+ Found by: Coverity scan.
+ CID: 96673
+
+2016-01-10 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ grub-install: include ehci in list of native modules
+ This matches behavior of "nativedisk" command.
+
+ Reported and tested by Smith Henry <sh37092@gmail.com>
+
+2016-01-10 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ grub-mkimage: remove redundant NULL check
+ Found by: Coverity scan.
+ CID: 73737
+
+2016-01-10 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ net: remove dead and redundant code
+ server cannot be NULL at this point (we return error earlier if it is).
+ Also structure is zalloc'ed, so no need to explicitly initialize
+ members to 0.
+
+ Found by: Coverity scan.
+ CID: 73837
+
+2016-01-10 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ hostdisk: fix device detection
+ Condition was apparently reversed so GRUB assumed all devices were
+ files. This later made it skip BLKFLSBUF ioctl on Linux which caused
+ various page cache coherency issues. Observed were
+
+ - failure to validate blocklist install (read content did not match
+ just written)
+
+ - failure to detect Linux MD on disk after online hot addition
+ (GRUB got stale superblock)
+
+ Closes: 46691
+
+2016-01-09 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ setup: fix NULL pointer dereference
+ Check return value of grub_guess_root_devices
+
+ Found by: Coverity scan.
+ CID: 73638, 73751
+
+2016-01-09 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ mkimage: fix unintended sign extension
+ Found by: Coverity scan.
+ CID: 73691, 73717
+
+2016-01-09 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ util/getroot: delete dead code
+ is_part cannot be non-zero at this point.
+
+ Found by: Coveruty scan.
+ CID: 73838
+
+2016-01-09 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ loader/multiboot: fix unintended sign extension
+ Found by: Coveruty scan.
+ CID: 73700, 73763
+
+ kern/elf: fix unintended sign extension
+ Found by: Coverity scan.
+ CID: 73729, 73735, 73758, 73760
+
+2016-01-09 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ xfs: fix possible inode corruption in directory scan
+ grub_xfs_iterate_dir did not restore first character after inline
+ name when match was found. Dependning on XFS format this character
+ could be inode number and we could return to the same node later in
+ find_file if processing cycled symlinks.
+
+ CID: 86724
+
+2016-01-09 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ rescue_parser: restructure code to avoid Coverity false positive
+ If line contains single word, line and argv[0] are aliases, so
+ no NULL dereference is possible, but Coverity does not know it.
+ Change code to avoid ambiguity and also remove redundant call to
+ grub_strchr.
+
+ CID: 86725
+
+2016-01-09 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ grub-mklayout: check subscript bounds
+ Found by: Coverity scan.
+ CID: 73686
+
+ grub-probe: fix memory leak
+ Found by: Coverity scan.
+ CID: 73783
+
+ gfxmenu: fix memory leak
+ Found by: Coverity scan.
+ CID: 73766
+
+2016-01-09 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ util/setup: fix grub_util_path_list leak
+ Add helper grub_util_free_path_list and use it where appropriate.
+
+ Found by: Coverity scan.
+ CID: 73727
+
+2016-01-09 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ setup: fix memory leak
+ Found by: Coverity scan.
+ CID: 73680, 73715
+
+ efiemu: check return value of grub_efiemu_write_value
+ Found by: Coverity scan.
+ CID: 73590
+
+ efiemu: change code to avoid Coverity false positive
+ CID: 73623
+
+ efiemu: fix unintended sign extension
+ Found by: Coverity scan.
+ CID: 73883, 73637
+
+ hfs: fix memory leak
+ Found by: Coverity scan.
+ CID: 156531
+
+ grub-module-verifier: fix unintended sign extension
+ Found by: Coverity scan.
+ CID: 156533, 156532
+
+2016-01-08 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Tests: Support arm-efi
+
+2016-01-07 Vladimir Serbinenko <phcoder@gmail.com>
+
+ arm64/setjmp: Add missing move for arg1 == 0 case.
+
+ grub-shell: Support arm64-efi
+
+2016-01-07 Mark Salter <msalter@redhat.com>
+
+ arm-efi: Reduce timer event frequency by 10
+ Timer event to keep grub msec counter was running at 1000HZ. This was too
+ fast for UEFI timer driver and resulted in a 10x slowdown in grub time
+ versus wallclock. Reduce the timer event frequency and increase tick
+ increment accordingly to keep better time.
+
+2016-01-07 Vladimir Serbinenko <phcoder@gmail.com>
+
+ x86_64-efi: Automatically add -bios OVMF.fd to qemu in tests.
+
+ Allow GRUB_QEMU_OPTS to override machine.
+
+ arm64: Disable tests that need native drivers.
+
+ Disable NetBSD bootcheck on EFI until it supports ACPI on EFI.
+
+ grub-shell: Use new cbfstool syntax.
+
+ grub-shell: On i386-ieee1275 don't try to switch to console.
+ console goes to serial as well, so this doesn't stop garbage from going
+ to serial. But it creates garbage itself.
+
+ hddboot_test: reenable on OVMF
+ OVMF now supports booting from disks.
+
+ iee1275/datetime: Fix off-by-1 error.
+
+2016-01-07 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Adjust bootcheck tests for multiboot/coreboot/qemu to match real support.
+ coreboot has ACPI while 2 others don't. *BSD need ACPI and have trouble
+ without it. Don't even attempt to boot *BSD on multiboot or qemu targets.
+
+ On coreboot boot all *BSD except 32-bit NetBSD which apparently does some
+ early BIOS calls.
+
+2016-01-05 Vladimir Serbinenko <phcoder@gmail.com>
+
+ minixfs_test: Check if mkfs.minixfs supports -B option.
+
+ Add memdisk support to grub-emu.
+ Use it to add custom files, so that tests which need them work.
+
+ Move file loading functions to grub-emu.
+ So that we can use it in grub-emu as well as utils.
+
+ Disable progress indicator in grub-shell.
+ This disables progress indicator for tests. This in turn fixes test
+ flakiness as they ended up timing-dependent.
+
+ Update checksums
+
+2016-01-02 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ acpihalt: add GRUB_ACPI_OPCODE_CREATE_DWORD_FIELD (0x8a)
+ Fixes ACPI halt on ASUSTeK P8B75-V,
+ Bios: American Megatrends v: 0414 date: 04/24/2012
+
+ Reported-By: Goh Lip <g.lip@gmx.com>
+
+2016-01-02 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ acpihalt: fix GRUB_DSDT_TEST compilation
+
+2016-01-01 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ Add missing BUILD_EXEEXT
+
+2015-12-31 Vladimir Serbinenko <phcoder@gmail.com>
+
+ configure.ac: Reorder efiemu check to after link format check.
+ efiemu is supposed to be disabled when compiling through exe format.
+ Unfortunately format was determined only after efiemu check. Reorder to fix the
+ problem
+
+2015-12-31 Andrey Borzenkov <arvidjaar@gmail.com>
+
+ remove temporary .bin files (kernel and modules)
+
+ add dejavu built fonts to cleanfiles
+
+2015-12-31 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ Add grub-module-verifier files to EXTRA_DIST
+
+2015-12-31 Vladimir Serbinenko <phcoder@gmail.com>
+
+ configure: Add -fno-unwind-tables if supported.
+ Unwind tables are useless for us bt consume space if present. Ensure that they
+ are not.
+
+ module-verifier: allow limited-range relocations on sparc64.
+ clang as incomplete mcmodel=large support. As we don't currently need full
+ mcmodel=large support for sparc64, relax those checks.
+
+ Disable build-time module check on emu.
+ On emu some checks can be laxer like check for relocation range. Additionally
+ module loading in emu is rarely used. So skip this check rather than making
+ it laxer for all platforms. In ideal we may want to have slightly different
+ check for emu but for now this is good enough.
+
+ configure: Fix grub_cv_cc_fno_unwind_tables check.
+ Check tries -fno-dwarf2-cfi-asm but adds -fno-asynchronous-unwind-tables
+ to TARGET_CFLAGS. Fix this.
+
+ Add -mno-stack-arg-probe on mingw.
+ This argument disables generation of calls to __chkstk_ms. Those calls are
+ useless on GRUB as function is dummy. Yet they increase module size and
+ use limited-range relocations which may not work under some memory layouts.
+ We currently don't use such layouts on concerned platforms but lt's correct
+ this.
+
+ Strip .ARM.exidx
+ This section is generated by clang and is useful only for debugging.
+ It contains exotic relocations, so strip them to avoid them interferring
+ with module loading.
+
+ module-verifier: Check range-limited relative relocations.
+ Check that they point to the same module, so will end up in the same
+ chunk of memory.
+
+ xen/relocator: Use local symbol to ensure that code is relocation-free.
+
+ backtrace: Fix register call syntax
+
+ Verify modules on build-time rather than failing in runtime.
+
+ sparc64: Fix assembly to let compiler to fill in memory references.
+ This fixes the use of not fully relocatable (they assume that variables are
+ under 4G limit in virtual memory) references.
+
+2015-12-30 Andrey Borzenkov <arvidjaar@gmail.com>
+
+ 30_os-prober: derive --class from os-prober generated label
+ Currently only Windows gets distinguished icons, everything else is displayed
+ using the same generic one. Add additional --class based on os-prober returned
+ label, which usually is expected to match primary distribution name.
+
+ Also use it for Windows as well - chainloader prober may actually return
+ different strings (Windows, MS-DOS, Windows9xME).
+
+2015-12-30 Vladimir Serbinenko <phcoder@gmail.com>
+
+ backtrace: Remove assembly assumption that grub_backtrace_pointer is under 4G
+
+2015-12-30 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ menu: fix line count calculation for long lines
+ It gave one extra screen line if length was exactly equal to screen
+ width.
+
+ Reported by Michael Chang.
+ Also-By: Michael Chang <mchang@suse.com>
+
+2015-12-29 Vladimir Serbinenko <phcoder@gmail.com>
+
+ grub-mkrescue: Delete temporary file
+ Reported by: Thomas Schmitt
+
+ grub-mount: Fix oath parsing.
+ Brackets detection was copied from somewhere else and makes no sense in case
+ of grub-mount and prevents user from accessing and files with ) in them.
+
+ exfat: Fix stream extension flag parsing.
+
+2015-12-26 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ devmapper: check for valid device abstraction in get_grub_dev
+ This was lost when code was refactored. Patch restores previous behavior.
+
+ It is still not clear whether this is the right one. Due to the way we
+ detect DM abstraction, partitions on DM are skipped, we fall through to
+ generic detection which ends up in assuming parent device is BIOS disk.
+
+ It is useful to install GRUB on VM disk from the host. But it also means
+ that GRUB will mistakenly allow install on real system as well.
+
+ For now let's fix regression; future behavior needs to be discussed.
+
+ Closes: 45163
+
+2015-12-19 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ windows: correct LBA in generated EFI HDD media paths
+ GRUB keeps partition offset and size in units of 512B sectors. Media paths
+ are defined in terms of LBA which are presumed to match HDD sector size.
+
+ This is probably cosmetic (EFI requires that partition is searched by GUID)
+ and still incorrect if GPT was created using different logical block size.
+ But current code is obviously wrong and new has better chances to be correct.
+
+2015-12-17 Robert Elliott <elliott@hpe.com>
+
+ lsefimmap: support persistent memory and other UEFI 2.5 features
+ This should accompany
+ 76ce1de740 Translate UEFI persistent memory type
+
+ 1. Add a string for the EfiPersistentMemory type 14 that was
+ added in UEFI 2.5.
+
+ 2. Decode the memory attributes that were added in UEFI 2.5:
+ * NV (non-volatile)
+ * MORE_RELIABLE (higher reliable, e.g., mirrored memory in a system
+ with partial memory mirroring)
+ * RO (read-only)
+
+ 3. Use proper IEC binary units (KiB, MiB, etc.) for power-of-two
+ values rather than misusing SI power-of-ten units (KB, MB, etc.)
+
+ 4. The lsmmap command only decodes memory ranges sizes up to GiB scale
+ units. Persistent memory ranges will reach into the TiB scale.
+ Since 64-bit size field supports TiB, PiB, and EiB, decode all of
+ them for completeness.
+
+ 5. In the lsefimmap command, rewrite the print statements to
+ * avoid rounding
+ * avoid a big nested if/else tree.
+
+ For example: In the sixth entry below, the value of 309MB implies
+ 316416KB but is really reporting 316436KB.
+
+ Widen the size column to 6 digits to accommodate typical cases.
+ The worst case value would require 14 digits; if that happens,
+ let the columns get out of sync.
+
+ Old format:
+ Type Physical start - end #Pages Size Attributes
+ conv-mem 0000000000000000-0000000000092fff 00000093 588KB UC WC WT WB
+ reserved 0000000000093000-0000000000093fff 00000001 4KB UC WC WT WB
+ conv-mem 0000000000094000-000000000009ffff 0000000c 48KB UC WC WT WB
+ conv-mem 0000000000100000-000000000fffffff 0000ff00 255MB UC WC WT WB
+ BS-code 0000000010000000-0000000010048fff 00000049 292KB UC WC WT WB
+ conv-mem 0000000010049000-000000002354dfff 00013505 309MB UC WC WT WB
+ ldr-data 000000002354e000-000000003ecfffff 0001b7b2 439MB UC WC WT WB
+ BS-data 000000003ed00000-000000003ed7ffff 00000080 512KB UC WC WT WB
+ conv-mem 000000003ed80000-000000006af5ffff 0002c1e0 705MB UC WC WT WB
+ reserved 000000006af60000-000000006b55ffff 00000600 6MB UC WC WT WB
+ BS-data 000000006b560000-000000006b560fff 00000001 4KB UC WC WT WB
+ RT-data 000000006b561000-000000006b5e1fff 00000081 516KB RT UC WC WT WB
+ BS-data 000000006b5e2000-000000006ecfafff 00003719 55MB UC WC WT WB
+ BS-code 000000006ecfb000-000000006ecfbfff 00000001 4KB UC WC WT WB
+ conv-mem 000000006ecfc000-00000000711fafff 000024ff 36MB UC WC WT WB
+ BS-data 00000000711fb000-000000007128dfff 00000093 588KB UC WC WT WB
+ Unk 0d 0000000880000000-0000000e7fffffff 00600000 24GB UC WC WT WB NV
+ reserved 0000001680000000-0000001c7fffffff 00600000 24GB UC WC WT WB NV
+
+ New format:
+ Type Physical start - end #Pages Size Attributes
+ conv-mem 0000000000000000-0000000000092fff 00000093 588KiB UC WC WT WB
+ reserved 0000000000093000-0000000000093fff 00000001 4KiB UC WC WT WB
+ conv-mem 0000000000094000-000000000009ffff 0000000c 48KiB UC WC WT WB
+ conv-mem 0000000000100000-000000000fffffff 0000ff00 255MiB UC WC WT WB
+ BS-code 0000000010000000-0000000010048fff 00000049 292KiB UC WC WT WB
+ conv-mem 0000000010049000-000000002354dfff 00013505 316436KiB UC WC WT WB
+ ldr-data 000000002354e000-000000003ecfffff 0001b7b2 450248KiB UC WC WT WB
+ BS-data 000000003ed00000-000000003ed7ffff 00000080 512KiB UC WC WT WB
+ conv-mem 000000003ed80000-000000006af5ffff 0002c1e0 722816KiB UC WC WT WB
+ reserved 000000006af60000-000000006b55ffff 00000600 6MiB UC WC WT WB
+ BS-data 000000006b560000-000000006b560fff 00000001 4KiB UC WC WT WB
+ RT-data 000000006b561000-000000006b5e1fff 00000081 516KiB RT UC WC WT WB
+ BS-data 000000006b5e2000-000000006ecfafff 00003719 56420KiB UC WC WT WB
+ BS-code 000000006ecfb000-000000006ecfbfff 00000001 4KiB UC WC WT WB
+ conv-mem 000000006ecfc000-0000000071222fff 00002527 38044KiB UC WC WT WB
+ BS-data 0000000071223000-00000000712ddfff 000000bb 748KiB UC WC WT WB
+ persist 0000000880000000-0000000e7fffffff 00600000 24GiB UC WC WT WB NV
+ reserved 0000001680000000-0000001c7fffffff 00600000 24GiB UC WC WT WB NV
+
+2015-12-16 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ kernel: print and reset grub_errno after each embedded config line
+ Otherwise it causes subsequent file open to fail, because grub_file_open
+ misinterprets set grub_errno for grub_file_get_device_name failure.
+
+ Closes: 46540
+
+2015-12-16 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ Erase backspaced character in grub_username_get
+ It probably does not work across linefeed, but hopefully user names are not
+ that long (and nobody is using terminal that small).
+
+2015-12-16 Hector Marco-Gisbert <hecmargi@upv.es>
+
+ Fix security issue when reading username and password
+ This patch fixes two integer underflows at:
+ * grub-core/lib/crypto.c
+ * grub-core/normal/auth.c
+
+ CVE-2015-8370
+
+ Also-By: Andrey Borzenkov <arvidjaar@gmail.com>
+
+2015-12-15 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ NEWS: more additions
+ Also-By: Robert Elliott <elliott@hpe.com>
+
+2015-12-15 Robert Elliott <elliott@hpe.com>
+
+ Translate UEFI persistent memory type
+ Define
+ * GRUB_EFI_PERSISTENT_MEMORY (UEFI memory map type 14) per UEFI 2.5
+ * GRUB_MEMORY_PERSISTENT (E820 type 7) per ACPI 3.0
+ * GRUB_MEMORY_PERSISTENT_LEGACY (E820 unofficial type 12) per ACPI 3.0
+
+ and translate GRUB_EFI_PERSISTENT_MEMORY to GRUB_MEMORY_PERSISTENT in
+ grub_efi_mmap_iterate().
+
+ Includes
+ * adding the E820 names to lsmmap
+ * handling the E820 types in make_efi_memtype()
+
+ Suggested-by: Vladimir 'φ-coder/phcoder' Serbinenko <phcoder@gmail.com>
+ Suggested-by: Andrei Borzenkov <arvidjaar@gmail.com>
+
+2015-12-14 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Document bootlocation discovery limitations and xen platform limitations
+
+2015-12-07 Josef Bacik <jbacik@fb.com>
+
+ tcp: ack when we get an OOO/lost packet
+ While adding tcp window scaling support I was finding that I'd get some packet
+ loss or reordering when transferring from large distances and grub would just
+ timeout. This is because we weren't ack'ing when we got our OOO packet, so the
+ sender didn't know it needed to retransmit anything, so eventually it would fill
+ the window and stop transmitting, and we'd time out. Fix this by ACK'ing when
+ we don't find our next sequence numbered packet. With this fix I no longer time
+ out. Thanks,
+
+2015-12-01 Michael Chang <mchang@suse.com>
+
+ i386: fix TSC calibration using PIT
+ Condition was accidentally reversed, so PIT calibration always failed
+ when PIT was present and always succeeded when PIT was missing, but in
+ the latter case resulted in absurdly fast clock.
+
+ Reported and tested by Vitaly Kuznetsov <vkuznets@redhat.com>
+
+2015-11-28 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ Do not include generated gnulib headers in tarball
+ gnulib files are already handled by recursive make distdir invocation.
+ Including all generated headers (after make completed) causes build
+ failure if target system is different (different compile version etc).
+
+2015-11-27 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ Replace numbers with grub_memory_type_t enums
+
+2015-11-27 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ configure: fix macports flex version detection
+ Macports add extra information after version itself:
+
+ $flex --version
+ flex 2.5.35 Apple(flex-31)
+
+ We require at least felx 2.5.35 so do not need to care about prehistoric
+ "flex version n.n.n"; just use second field always.
+
+ Reported by Peter Cheung <mcheung63@hotmail.com>
+
+2015-11-27 Vladimir Serbinenko <phcoder@gmail.com>
+
+ tsc: Use alternative delay sources whenever appropriate.
+ PIT isn't available on some of new hardware including Hyper-V. So
+ use pmtimer for calibration. Moreover pmtimer calibration is faster, so
+ use it on coreboor where booting time is important.
+
+ Based on patch by Michael Chang.
+
+2015-11-26 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ efi: really mark memory of unknown type as reserved
+ 9be4c45dbe3c877d1f4856e99ee15133c6cd2261 added switch case between
+ fall through cases, causing all memory regions of unknown type to be
+ marked as available.
+
+ Move default case into its own block and add explicit FALLTHROUGH
+ annotation.
+
+ Reported by Elliott, Robert (Persistent Memory) <elliott@hpe.com>
+
+2015-11-24 Josef Bacik <jbacik@fb.com>
+
+ net: reset nb->data per dns record lookup loop
+ We were resetting nb->data every time we tried a new server, but we need to do
+ it every time we try for a different record, otherwise we don't end up falling
+ back to the A record properly. Thanks,
+
+2015-11-18 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ unix: do not close stdin in grub_passwd_get
+ This makes it impossible to read from stdin without controlling tty:
+
+ 10:/mnt # echo -e passwd\\npasswd | setsid ./grub-mkpasswd-pbkdf2
+ Enter password:
+ Reenter password: ./grub-mkpasswd-pbkdf2: error: failure to read password.
+ 10:/mnt
+
+2015-11-17 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ lsefisystab: add missing comma after 7994077
+
+2015-11-14 Pavel Bludov <pbludov@gmail.com>
+
+ Add some UUIDs found in the hardware
+
+2015-11-13 Konstantin Vlasov <kvlasov@odin.com>
+
+ gfxterm: fix calculation of terminal-top and terminal-height
+ They used screen width, not height.
+
+2015-11-12 Paulo Flabiano Smorigo <pfsmorigo@linux.vnet.ibm.com>
+
+ ofdisk: add sas disks to the device list
+
+2015-11-12 Vladimir Serbinenko <phcoder@gmail.com>
+
+ multiboot: Don't rely on particular ordering of options.
+
+ multiboot_mbi: Fix handling of --quirk-bad-kludge.
+
+2015-11-12 Fu Wei <fu.wei@linaro.org>
+
+ xen_boot: Remove useless file_name_index variable.
+
+ Document ARM64 xen commands
+
+2015-11-11 Vladimir Serbinenko <phcoder@gmail.com>
+
+ asm-tests/i386-pc: Check that near jumps are 2 bytes.
+ We already check that jump over 300 bytes gap is 3 bytes in code16-mode.
+ Some clang versions generate 3-byte opcode for short jumps which makes
+ boot.img blow over 512-byte limit. Enforce -no-integrated-as in such cases
+
+2015-11-11 Paulo Flabiano Smorigo <pfsmorigo@linux.vnet.ibm.com>
+
+ ofdisk: add a comment about vscsi method
+
+2015-11-09 Vladimir Serbinenko <phcoder@gmail.com>
+
+ fdt.mod: Move license tag to the right file.
+
+2015-11-09 Fu Wei <fu.wei@linaro.org>
+
+ fdt.mod: Add missing license tag.
+
+2015-11-09 Vladimir Serbinenko <phcoder@gmail.com>
+
+ kern/elf: Ignore cast-align warnings
+
+2015-11-09 Vladimir Serbinenko <phcoder@gmail.com>
+
+ cbfs: Fix corner case and compilation with recdent gcc
+ Accept the header to touch the jump address at 0xfffffff0.
+
+ Fix compilation for 64-bit EFI with recent GCC.
+
+2015-11-08 Vladimir Serbinenko <phcoder@gmail.com>
+
+ fstester: Enforce LC_ALL=C
+
+ Adapt build-system to use imported xen headers.
+
+ Import xen headers directly into GRUB
+
+ cbfs: Check for ptr range sanity.
+ Triaged by Andrei and enhanced with suggestions by Aaron Durbin
+ Also-By: Andrei Borzenkov <arvidjaar@gmail.com>
+
+ Remove reliance C.UTF-8
+
+ genmoddep.awk: Add a test that we have no circular dependencies
+
+ Makefile.core.def: Break circular dependency on arm64.
+
+ autogen: Use cp instead of ln -s.
+ libgcrypt-grub shouldn't be modified directly anyway. With this patch
+ tarball without contrib can be unpacked on FAT and stay usable for
+ out-of-tree compile on full POSIX FS (compile on FAT not tested).
+
+2015-11-07 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ partmap_test: check that parted is available
+ Skip test if parted is unavailable instead of returning false failure.
+
+2015-11-07 grub-devel@iam.tj <grub-devel@iam.tj>
+
+ cryptodisk: teach grub_cryptodisk_insert() about partitions (bug #45889)
+ It is not possible to configure encrypted containers on multiple partitions of
+ the same disk; after the first one all subsequent fail with
+
+ disk/cryptodisk.c:978: already mounted as crypto0
+
+ Store partition offset in cryptomount descriptor to distinguish between them.
+
+2015-11-07 Andrey Borzenkov <arvidjaar@gmail.com>
+
+ doc: document config_directory and config_file variables
+
+2015-11-07 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ unix/getroot: remove unused MAJOR definition
+ We use major() everywhere, these definitions just add to confusion.
+
+ Add comments to code for commit d313218
+
+2015-11-07 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ devmapper/getroot: use makedev instead of direct shift
+ Fixes device detection with large number of devices.
+
+ Reported by Tim Wallberg <twalberg@comcast.net>
+
+2015-11-06 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ mkimage: zero fill alignment space
+ This did not cause real problem but is good for reproducible builds. I hit
+ it with recent bootinfoscript that displays embedded config; I was puzzled
+ by random garbage at the end.
+
+ Prezero memory buffer used to assemble core.img. This makes individual
+ memset redundant. Also ensure buffer is filled with zeroes in several other
+ places.
+
+ Also remove redundant zeroing code where we fill in the whole memory block
+ anyway.
+
+2015-11-06 Vladimir Serbinenko <phcoder@gmail.com>
+
+ configure.ac: Explicitly add -mno-sse3 on x86.
+
+ README: Remove dead link to the wiki
+
+2015-10-29 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ NEWS: mention powerpc64le support
+
+2015-10-29 Ignat Korchagin <ignat>
+
+ tcp: Fix uninited mac address when accepting connection.
+
+2015-10-29 Fu Wei <fu.wei@linaro.org>
+
+ arm64: Add support for xen boot protocol.
+
+2015-10-29 Vladimir Serbinenko <phcoder@gmail.com>
+
+ arm64: Move FDT functions to separate module
+
+2015-10-27 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ efi: fix warnings with recent GCC
+ ../../grub-core/term/efi/console.c:128:32: error: suggest parentheses around '&&' within '||' [-Werror=parentheses]
+ if (key.unicode_char >= 0x20 && key.unicode_char <= 0x7f
+
+2015-10-26 Eric Snowberg <eric.snowberg@oracle.com>
+
+ ofdisk: Fix devpath freeing logic.
+
+2015-10-26 Paulo Flabiano Smorigo <pfsmorigo@linux.vnet.ibm.com>
+
+ Implement cross-endian ELF load for powerpc
+
+2015-10-25 Peter Jones <pjones@redhat.com>
+
+ Use EFI_SIMPLE_TEXT_INPUT_EX to support key combinations.
+
+2015-10-14 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ configure: find options to force endian on MIPS
+
+2015-10-14 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ configure: force o32 ABI on MIPS
+ GRUB code expects O32 or N32. N32 is less tested than O32, so we prefer to
+ compile with O32. Some systems (e.g. GNU Guix) default to using newer
+ n64 or n32 ABI. Try to find suitable options to force o32.
+
+ For GCC this is simply -mabi=32. While clang supports this option as well,
+ o32 ABI is valid for MIPS target and n32/64 ABI are valid for MIPS64 target
+ only, so use "-target mips/mipsel -mabi=32".
+
+ Reported-By: Mark H Weaver <mhw@netris.org>
+ Also-By: Mark H Weaver <mhw@netris.org>
+
+2015-10-12 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ net: avoid closing NULL socket in DNS lookup
+ Refactor code so that we do not store NULL pointers in array
+ of in-flight DNS servers.
+
+ Reported-By: Josef Bacik <jbacik@fb.com>
+
+2015-10-11 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ install: --compress argument is not optional
+ Fixes crash if argument is not specified. Also use `|' to separate choices
+ in list of compression methods to align it with --core-compress.
+
+2015-10-11 Vladimir Serbinenko <phcoder@gmail.com>
+
+ mips: Make setjmp code N32-compliant.
+
+ mips: Make the assembly-code N32-compatible.
+ There are no $t4 or $t5 in N32 but there are $a4 and $a5.
+
+2015-10-10 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ progress: avoid NULL dereference for net files
+ From original patch by dann frazier <dann.frazier@canonical.com>:
+
+ grub_net_fs_open() saves off a copy of the file structure it gets passed and
+ uses it to create a bufio structure. It then overwrites the passed in file
+ structure with this new bufio structure. Since file->name doesn't get set
+ until we return back to grub_file_open(), it means that only the bufio
+ structure gets a valid file->name. The "real" file's name is left
+ uninitialized. This leads to a crash when the progress module hook is called
+ on it.
+
+ grub_net_fs_open() already saved copy of file name as ->net->name, so change
+ progress module to use it.
+
+ Also, grub_file_open may leave file->name as NULL if grub_strdup fails. Check
+ for it.
+
+ Also-By: dann frazier <dann.frazier@canonical.com>
+
+2015-10-10 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ file: ignore host disk in blocklist check
+ It cannot work anyway because host disk cannot be read. This fixes hostfs access
+ on native Windows build where filenames start with '\' or do not have initial
+ separator at all (d:\foo).
+
+ Issue was observed when running grub-fstest on Windows. On UNIX image name is
+ canonicalized to always start with `/' so this was not noticed.
+
+ This has side effect of allowing relative path names on host, but this already
+ was the case with `ls' command, so it just extends it to all commands.
+
+ Reported-By: Arch Stack <archstacker@gmail.com>
+ Also-By: Arch Stack <archstacker@gmail.com>
+
+2015-10-09 Vladimir Serbinenko <phcoder@gmail.com>
+
+ mips/dl: Handle addend in RELA entries.
+
+ gfxmenu/model: Delete empty file.
+
+2015-10-09 Alexander Bluhm <bluhm@genua.de>
+
+ ufs: Fix parameters to grub_memset.
+ len = 0 made simply no sense. Fix parameters to be in line with read.
+
+2015-10-07 Stanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com>
+
+ ofnet: Do not set SUFFIX for sun4v network devices
+ sun4v vnet devices do not implement the support of duplex and speed
+ instance attributes. An attempt to open such a device with
+ the attributes will fail:
+
+ ok select net:speed=auto,duplex=auto
+ Unknown key 'speed'
+ Unknown key 'duplex'
+ Manual Configuration: Host IP, boot server and filename must be specified
+ WARNING: /virtual-devices@100/channel-devices@200/network@0: Can't open OBP standard TFTP package
+
+ Can't open device
+ ok
+
+ Therefore, let's not set SUFFIX for such devices.
+
+2015-10-07 Eric Snowberg <eric.snowberg@oracle.com>
+
+ sparc64 - use correct drive name within grub_util_sparc_setup
+ Incorrect drive name was being passed into grub_util_sparc_setup,
+ causing the grub-install to fail.
+
+2015-09-13 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ cryptodisk: strip parenthesis from backing device name
+ Otherwise subsequent disk open fails.
+
+ Reported-By: Klemens Nanni <contact@autoboot.org>
+
+2015-08-22 Felix Zielcke <fzielcke@z-51.de>
+
+ disk/ldm, partmap/msdos.c: fix spelling error
+
+2015-08-13 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ net: do not try to load protocol module via itself
+ Otherwise we get infinite recursion.
+
+ Closes: 45729
+
+2015-08-09 Josef Bacik <jbacik@fb.com>
+
+ efinet: handle get_status() on buggy firmware properly
+ The EFI spec indicates that get_status() should return the address of the buffer
+ we passed into transmit to indicate the the buffer was transmitted. However we
+ have boxes where the firmware returns some arbitrary address instead, which
+ makes grub think that we've not sent anything. So since we have the SNP stuff
+ opened in exclusive mode just assume any non-NULL txbuf means that our transmit
+ occurred properly. This makes grub able to do its networking stuff properly on
+ our broken firmware. Thanks,
+
+ cc: Peter Jones <pjones@redhat.com>
+
+2015-08-09 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ linguas.sh: fix error when removing non-existing autogenerated files
+
+2015-07-28 Vladimir Serbinenko <phcoder@gmail.com>
+
+ ahci: Ensure that bus mastering is set.
+ Fixes ahci_test failing on several platforms.
+
+2015-07-27 Vladimir Serbinenko <phcoder@gmail.com>
+
+ archelp: Never pass NULL as mtime.
+ Moves complexity from fs code (NULL check) to common code (passing non-NULL).
+
+ HFS: Convert to fshelp.
+ HFS doesn't handle "." and ".." properly. Convert it to fshelp to reuse the
+ logic.
+
+ FAT: Convert to fshelp.
+ exFAT doesn't handle "." and ".." correctly, convert it to fshelp to
+ reuse the same logic.
+
+ BFS: Convert to fshelp.
+ BFS doesn't handle ".." correctly, so convert it to fshelp to reuse the logic.
+
+ fshelp: Add handling of "." and ".." and grub_fshelp_find_file_lookup.
+ Recent tests have discovered that many of our filesystems have flawed
+ handling of "." and "..". Rather than attempting to fix it in filesystems
+ themselves, make the common code fshelp aware of "." and ".." and handle
+ them in this layer. Add grub_fshelp_find_file_lookup for easy conversion
+ of BFS, HFS and exFAT which have the same problem and don't use fshelp.
+
+ Switch procfs to use archelp.
+ This fixes handling of "." and "..".
+
+ grub-install: Use a+ in fopen rather than r+.
+ r+ does not create a file if none exists.
+
+ Add transform_data as a variant of data with substitutions.
+ This fixrs name mismatch for grub.chrp with
+ transform_program_name='s,grub,grub2,g'
+
+2015-07-24 Ignat Korchagin <ignat@cloudflare.com>
+
+ efi: fix GetVariable return status check in 81ca24a
+ GetVariable should return EFI_BUFFER_TOO_SMALL if given buffer of size
+ zero; commit incorrectly checked for EFI_SUCCESS.
+
+2015-07-24 Vladimir Serbinenko <phcoder@gmail.com>
+
+ zfs_test: Skip dotdot in volume root test.
+ Given special semantics of ZFS it's far from clear what the expected
+ result is. Just skip it for now
+
+ xfs_test: Test both crc and non-crc filesystems.
+
+ xfs: Fix handling of symlink with crc-enabled filesystem.
+
+ reiserfs: Fix handling of first entry in the directory.
+ Fixes garbage being added to "." filename.
+
+2015-07-23 Ignat Korchagin <ignat@cloudflare.com>
+
+ efi: fix memory leak in variable handling
+
+2015-07-23 Vladimir Serbinenko <phcoder@gmail.com>
+
+ exclude.pot: Add missing blacklisted strings.
+
+ archelp: Fix handling of dot and dotdot at the end of the name.
+ Fixes cpio_test and tar_test.
+
+ arm-emu: Add __aeabi_memcpy* and __aeabi_memclr* symbols.
+ Fixes compilation with clang.
+
+2015-07-22 Vladimir Serbinenko <phcoder@gmail.com>
+
+ fwstart: Fix loading of address of read_spd_fail.
+
+ fwstart: Add missing argument to p2align.
+ Resulting binary is unchanged as it happens we were already aligned
+ by chance.
+
+2015-07-22 Vladimir Serbinenko <phcoder@gmail.com>
+
+ fwstart: Replace blt with bltz.
+ blt A, $zero, B and bltz A, B are equivalent but clang recognizes only
+ later, so use it.
+
+ Resulting binary is unchanged.
+
+2015-07-22 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Remove mips_attributes.
+ mips_attributes was introduced to work around clang problems with
+ -msoft-float. Those problems are now fixed and moreover .gnu_attributes
+ itself is unportable and creates problem with clang.
+
+ Revert "mips: Fix soft-float handling."
+
+ This partially reverts commit 6a4ecd276ed39f66be0ad6ff0f8ff67598098605.
+
+2015-07-22 Vladimir Serbinenko <phcoder@gmail.com>
+
+ ARM: provide __aeabi_memclr* and __aeabi_memcpy* symbols
+ Fixes compilation with recent clang.
+
+ diskfilter: Make name a const char to fix compilation error.
+
+ dmraid_nvidia: Set a name to usable value to avoid null dereference.
+ Reported by: Andrei Borzenkov
+
+ configure.ac: Handle powerpc64le compiler
+ Also-by: Paulo Flabiano Smorigo <pfsmorigo@linux.vnet.ibm.com>
+
+2015-07-20 Bernhard Übelacker <bernhardu@vr-web.de>
+
+ loader/linux: Make trailer initrd entry aligned again.
+ Regression from commit:
+ loader/linux: do not pad initrd with zeroes at the end
+ a8c473288d3f0a5e17a903a5121dea1a695dda3b
+
+ Wimboot fails since the change above because it expects the "trailer"
+ initrd element on an aligned address.
+ This issue shows only when newc_name is used and the last initrd
+ entry has a not aligned size.
+
+2015-07-16 Vladimir Serbinenko <phcoder@gmail.com>
+
+ XFS: Fix wrong alignment treatment.
+
+ grub_ext2_read_block: Fix return type on error.
+
+2015-07-05 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ use TARGET_LDFLAGS in grub_PROG_OBJCOPY_ABSOLUTE
+ That's what Makefile will use and it is required if unusual flags
+ must be passed to linker (e.g. to build ppc32 code on ppc64le with clang).
+
+2015-06-26 Michael Chang <mchang@suse.com>
+
+ Fix missing byte order conversion in get_btrfs_fs_prefix function
+ Since btrfs on-disk format uses little-endian, the searched item types
+ (ROOT_REF, INODE_REF) need converting the byte order in order to
+ function properly on big-endian systems.
+
+2015-06-26 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ chainloader: fix resoource leak
+ Found by: Coverity scan.
+ CID: 96651
+
+ loader/bsd: fix memory leak
+ Found by: Coverity scan.
+ CID: 96662, 96665
+
+2015-06-20 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ loader/bsd: free memory leaks
+ Found by: Coverity scan.
+ CID: 96671, 96658, 96653
+
+ search_wrap: fix memory leak
+ Found by: Coverity scan.
+ CID: 96675
+
+ password_pbkdf2: fix memory leak
+ Found by: Coverity scan.
+ CID: 96676
+
+ normal: fix memory leak
+ Found by: Coverity scan.
+ CID: 96677
+
+ efi/serial: fix memory leak
+ Found by: Coverity scan.
+ CID: 96678
+
+ ohci: fix memory leak
+ Found by: Coverity scan.
+ CID: 96679
+
+ loader/bsd: free memory leaks
+ Found by: Coverity scan.
+ CID: 96682
+
+ multiboot: fix memory leak
+ Found by: Coverity scan.
+ CID: 96684
+
+ normal: fix memory leak
+ Found by: Coverity scan.
+ CID: 96685
+
+ loader/bsd: fix memory leak
+ Found by: Coverity scan.
+ CID: 96686
+
+ reed_solomon: fix memory leak
+ Found by: Coverity scan.
+ CID: 96688
+
+ usb: fix use after free
+ Found by: Coverity scan.
+ CID: 96704
+
+ xnu: fix use after free
+ Found by: Coverity scan.
+ CID: 96706
+
+ disk/scsi: fix use after free
+ Found by: Coverity scan.
+ CID: 96713
+
+ efi/chainloader: fix use after free
+ Found by: Coverity scan.
+ CID: 96714
+
+ search: fix use after free
+ Found by: Coverity scan.
+ CID: 96715
+
+ NEWS: emu libusb support removed
+
+2015-06-19 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ grub-probe: fix memory leak in probe (ofpath)
+ Found by: Coverity scan.
+ CID: 73772
+
+2015-06-19 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ grub-probe: restructure code to make static analysis easier
+ Current code in probe() could not be verified to not contain memory leaks.
+ Restructure code and ensure grub_device_close is always called at the end of
+ loop.
+
+ Calms down Coverity scan.
+ CID: 73739
+
+2015-06-19 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ zfs: fix memory leak
+ Found by: Coverity scan.
+ CID: 73647
+
+ xfs: silence Coverity overflow warning
+ inode size cannot really overflow integer, but Coverity does not know it.
+ CID: 96602
+
+ zfs: memory leak
+ Found by Coverity scan.
+ CID: 96603
+
+ unix/getroot: memory leak
+ Found by Coverity scan.
+ CID: 96605
+
+ unix/relpath: memory leak
+ Found by Coverity scan.
+ CID: 96606
+
+2015-06-19 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ syslinux_parse: assorted issues found by Coverity
+ 1. Remove unneeded NULL check
+ CID: 96607
+
+ 2. Do not allocate storage for initrd, copy it directly from input
+ buffer. Avoids memory leak in failure path.
+ CID: 96604
+
+ 3. Unchecked error return from print()
+ CID: 96601, 73595
+
+2015-06-19 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ syslinux_parse: make print_escaped actually stop before `to'
+ The only current user is mboot.c32 which unfortunately is not covered
+ by regression tests.
+
+2015-06-18 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ fat: fix handling of "." and ".." directory entries
+ Emulate dot and dotdot in root directory. For other directories do not
+ add separator between name and extension for these two special entries.
+
+ Closes: 45335
+
+2015-06-18 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ tests: regression tests for "." and ".." directory entries
+
+2015-06-16 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ efinet: enable hardware filters when opening interface
+ Exclusive open on SNP will close all existing protocol instances which
+ may disable all receive filters on interface. Reinstall them after we
+ opened protocol exclusively.
+
+ Also follow UEFI specification recommendation and stop interfaces when
+ closing them:
+
+ Unexpected system errors, reboots and hangs can occur if an OS is loaded
+ and the network devices are not Shutdown() and Stopped().
+
+ Also by: Mark Salter <msalter@redhat.com>
+ Closes: 45204
+
+2015-06-16 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ NEWS: mention libgcc removal
+
+2015-06-15 Paulo Flabiano Smorigo <pfsmorigo@linux.vnet.ibm.com>
+
+ Add flag for powerpc ieee1275 to avoid unneeded optimizations
+
+2015-06-12 Mark Salter <msalter@redhat.com>
+
+ Fix exit to EFI firmware
+ The current code for EFI grub_exit() calls grub_efi_fini() before
+ returning to firmware. In the case of ARM, this leaves a timer
+ event running which could lead to a firmware crash. This patch
+ changes this so that grub_machine_fini() is called with a NORETURN
+ flag. This allows machine-specific shutdown to happen as well
+ as the shutdown done by grub_efi_fini().
+
+2015-06-12 Paul Menzel <paulepanter@users.sourceforge.net>
+
+ disk/ahci.c: Use defines `GRUB_AHCI_HBA_PORT_CMD_SPIN_UP` and `GRUB_AHCI_HBA_PORT_CMD_POWER_ON`
+ Instead of hard coding `2` and `4` use the macros defined already at the
+ top of the file. As a consequence, wrap the now too long line.
+
+2015-06-12 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ NEWS: XFS v5 support
+
+2015-06-12 Jan Kara <jack@suse.cz>
+
+ xfs: V5 filesystem format support
+ Add support for new XFS on disk format. We have to handle optional
+ filetype fields in directory entries, additional CRC, LSN, UUID entries
+ in some structures, etc.
+
+ xfs: Add helpers for inode size
+ Add helpers to return size of XFS inode on disk and when loaded in
+ memory.
+
+2015-06-04 Toomas Soome <tsoome@me.com>
+
+ multiboot_header_tag_module_align fix to confirm multiboot specification
+
+2015-06-02 Leif Lindholm <leif.lindholm@linaro.org>
+
+ configure.ac: clean up arm64 soft-float handling
+ Fix compilation with gcc 5.1 (avoid internal compiler error), by
+ replacing explicit -march +nofp+nosimd options with -mgeneral-regs-only.
+
+ This also enables the removal of some further conditional build flag
+ setting.
+
+2015-06-01 dann frazier <dann.frazier@canonical.com>
+
+ arm64/setjmp: Add missing license macro
+ Including the setjmp module in an arm64-efi image will cause it to
+ immediately exit with an "incompatible license" error.
+
+ The source file includes a GPLv3+ boilerplate, so fix this by declaring a
+ GPLv3+ license using the GRUB_MOD_LICENSE macro.
+
+2015-05-31 Paul Menzel <paulepanter@users.sourceforge.net>
+
+ disk/ahci.c: Add port number to port debug messages
+ Currently, some messages cannot be mapped to the port they belong to as
+ the port number is missing from the output. So add `port: n` to the
+ debug messages.
+
+2015-05-30 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ Clarify use of superusers variable and menu entry access
+ superusers controls both CLI and editing. Also explicitly mention that
+ empty superusers disables them.
+
+ "Access to menuentry" is a bit vague - change to "execute menuentry"
+ to make it obvious, what access is granted.
+
+2015-05-30 Paul Menzel <paulepanter@users.sourceforge.net>
+
+ Correct spelling of *scheduled*
+ Run the command below
+
+ $ git grep -l schedulded | xargs sed -i 's/schedulded/scheduled/g'
+
+ and revert the change in `ChangeLog-2015`.
+
+ Including "miscellaneous" spelling fix noted by richardvoigt@gmail.com
+
+2015-05-30 Toomas Soome <tsoome@me.com>
+
+ zfs extensible_dataset and large_blocks feature support
+ large blocks basically use extensible dataset feature, or to be exact,
+ setting recordsize above 128k will trigger large_block feature to be
+ enabled and storing such blocks is using feature extensible dataset. so
+ the extensible dataset is prerequisite.
+
+ Changes implement read support extensible dataset… instead of fixed DMU
+ types they dont specify type, making it possible to use fat zap objects
+ from bonus area.
+
+2015-05-27 Vladimir Serbinenko <phcoder@gmail.com>
+
+ multiboot1: never place modules in low memory.
+ While in theory permitted by the spec, modules rarely fit in low memory
+ anyway and not every kernel is able to handle modules in low memory anyway.
+ At least VMWare is known not to be able to handle modules at arbitrary
+ locations.
+
+2015-05-24 Paul Menzel <paulepanter@users.sourceforge.net>
+
+ disk/ahci: Use defines `GRUB_ATA_STATUS_BUSY` and `GRUB_ATA_STATUS_DRQ`
+ Instead of hard coding `0x88` use the macros defined in `disk/ata.h`.
+
+2015-05-19 Paul Menzel <paulepanter@users.sourceforge.net>
+
+ cb_timestamps.c: Add new time stamp descriptions
+ Add the descriptions of the “core”, that means no vendorcode or payload,
+ coreboot time stamps added up to coreboot commit a7d92441 (timestamps:
+ You can never have enough of them!) [1].
+
+ Running `coreboot_boottime` in the GRUB command line interface now shows
+ descriptions for all time stamps again on the ASRock E350M1.
+
+ [1] http://review.coreboot.org/9608
+
+2015-05-17 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ bootp: ignore gateway_ip (relay) field.
+ From RFC1542:
+
+ The 'giaddr' field is rather poorly named. It exists to facilitate
+ the transfer of BOOTREQUEST messages from a client, through BOOTP
+ relay agents, to servers on different networks than the client.
+ Similarly, it facilitates the delivery of BOOTREPLY messages from the
+ servers, through BOOTP relay agents, back to the client. In no case
+ does it represent a general IP router to be used by the client. A
+ BOOTP client MUST set the 'giaddr' field to zero (0.0.0.0) in all
+ BOOTREQUEST messages it generates.
+
+ A BOOTP client MUST NOT interpret the 'giaddr' field of a BOOTREPLY
+ message to be the IP address of an IP router. A BOOTP client SHOULD
+ completely ignore the contents of the 'giaddr' field in BOOTREPLY
+ messages.
+
+ Leave code ifdef'd out for the time being in case we see regression.
+
+ Suggested by: Rink Springer <rink@rink.nu>
+ Closes: 43396
+
+2015-05-17 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ hostdisk: fix crash with NULL device.map
+ grub-macbless calls grub_util_biosdisk_init with NULL device.map.
+
+2015-05-14 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ zfs: fix integer truncation in zap_lookup
+ Size after shift could exceed 16 bits; use grub_unit32_t for result.
+
+ Reported and tested by: Kostya Berger <bergerkos@yahoo.co.uk>
+ Closes: 44448
+
+2015-05-13 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ remove extra newlines in grub_util_* strings
+ grub_util_{info,warn,error} already add trailing newlines, so remove
+ them from format strings. Also trailing full stops are already added.
+
+2015-05-12 Jan Kara <jack@suse.cz>
+
+ xfs: Convert inode numbers to cpu endianity immediately after reading
+ Currently XFS driver converted inode numbers to native endianity only
+ when using them to compute inode position. Although this works, it is
+ somewhat confusing. So convert inode numbers when reading them from disk
+ structures as every other field.
+
+2015-05-11 Jan Kara <jack@suse.cz>
+
+ xfs: Fix termination loop for directory iteration
+ Directory iteration used wrong position (sizeof wrong structure) for
+ termination of iteration inside a directory block. Luckily the position
+ ended up being wrong by just 1 byte and directory entries are larger so
+ things worked out fine in practice. But fix the problem anyway.
+
+2015-05-08 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ acpi: do not skip BIOS scan if EBDA length is zero
+ EBDA layout is not standardized so we cannot assume first two bytes
+ are length. Neither is it required by ACPI standard. HP 8710W is known
+ to contain zeroes here.
+
+ Closes: 45002
+
+2015-05-07 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ Add asm-tests to tarball
+
+2015-05-07 Vladimir Serbinenko <phcoder@gmail.com>
+
+ util/grub-mkrescue: Fix compilation
+
+2015-05-07 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ efinet: open Simple Network Protocol exclusively
+ EDK2 network stack is based on Managed Network Protocol which is layered
+ on top of Simple Management Protocol and does background polling. This
+ polling races with grub for received (and probably trasmitted) packets
+ which causes either serious slowdown or complete failure to load files.
+
+ Open SNP device exclusively. This destroys all child MNP instances and
+ stops background polling.
+
+ Exclusive open cannot be done when enumerating cards, as it would destroy
+ PXE information we need to autoconfigure interface; and it cannot be done
+ during autoconfiguration as we need to do it for non-PXE boot as well. So
+ move SNP open to card ->open method and add matching ->close to clean up.
+
+ Based on patch from Mark Salter <msalter@redhat.com>
+
+ Also-By: Mark Salter <msalter@redhat.com>
+ Closes: 41731
+
+2015-05-07 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ efinet: skip virtual IPv4 and IPv6 devices when enumerating cards
+ EDK2 PXE driver creates two child devices - IPv4 and IPv6 - with
+ bound SNP instance. This means we get three cards for every physical
+ adapter when enumerating. Not only is this confusing, this may result
+ in grub ignoring packets that come in via the "wrong" card.
+
+ Example of device hierarchy is
+
+ Ctrl[91] PciRoot(0x0)/Pci(0x3,0x0)
+ Ctrl[95] PciRoot(0x0)/Pci(0x3,0x0)/MAC(525400123456,0x1)
+ Ctrl[B4] PciRoot(0x0)/Pci(0x3,0x0)/MAC(525400123456,0x1)/IPv4(0.0.0.0)
+ Ctrl[BC] PciRoot(0x0)/Pci(0x3,0x0)/MAC(525400123456,0x1)/IPv6(0000:0000:0000:0000:0000:0000:0000:0000)
+
+ Skip PXE created virtual devices when enumerating cards. Make sure to
+ find real card when applying initial autoconfiguration during PXE boot,
+ this information is associated with one of child devices.
+
+2015-05-07 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ efidisk: move device path helpers in core for efinet
+
+ convert to, not from, CPU byte order in DNS receive function
+
+2015-05-07 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ loader/linux: do not pad initrd with zeroes at the end
+ Syslinux memdisk is using initrd image and needs to know uncompressed
+ size in advance. For gzip uncompressed size is at the end of compressed
+ stream. Grub padded each input file to 4 bytes at the end, which means
+ syslinux got wrong size.
+
+ Linux initramfs loader apparently does not care about trailing alignment.
+ So change code to align beginning of each file instead which atomatically
+ gives us the correct size for single file.
+
+ Reported-By: David Shaw <dshaw@jabberwocky.com>
+
+2015-05-07 Daniel Kiper <daniel.kiper@oracle.com>
+
+ i386/relocator: Remove unused extern grub_relocator64_rip_addr
+
+2015-05-07 Vladimir Serbinenko <phcoder@gmail.com>
+
+ grub-install-common: Increase buf size to 8192 as modinfo.sh is bigger.
+
+2015-05-07 Vladimir Serbinenko <phcoder@gmail.com>
+
+ grub-mkrescue: Recognize -output as an alias of --output.
+ This helps us to be in line with xorriso -as mkisofs.
+
+ Suggested by: Thomas Schmitt
+
+2015-05-07 Vladimir Serbinenko <phcoder@gmail.com>
+
+ linux.c: Ensure that initrd is page-aligned.
+
+ Revert parts accidentally committed 2 commits ago.
+
+2015-05-07 Fu Wei <fu.wei@linaro.org>
+
+ fdt.h: Add grub_fdt_set_reg64 macro
+
+ arm64: Export useful functions from linux.c
+
+2015-05-04 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ Revert "efinet: memory leak on module removal"
+ This reverts commits 47b2bee3ef0ea60fc3f5bfc37f3784e559385297
+ and 8d3c4544ffdd0289a4b0bdeb0cdc6355f801a4b3. It is not safe
+ to free allocated cards, dangling pointers main remain. Such
+ cleanup requires more changes in net core.
+
+ efinet: cannot free const char * pointer
+
+ efinet: memory leak on module removal
+
+2015-05-03 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ zfs: add missing NULL check and fix incorrect buffer overwrite
+ grub_memset should zero out padding after data end. It is not clear
+ why it is needed at all - ZFS block is at least 512 bytes and power
+ of two, so it is always multiple of 16 bytes. This grub_memset
+ apparently never did anything.
+
+2015-05-03 Toomas Soome <tsoome@me.com>
+
+ zfs: com.delphix:embedded_data feature support
+
+ zfs: com.delphix:hole_birth feature support
+ In the past birth was always zero for holes. This feature started
+ to make use of birth for holes as well, so change code to test for
+ valid DVA address instead.
+
+2015-04-29 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ grub-mkconfig: use $pkgdatadir in scripts
+ Otherwise scripts will source wrong grub-mkconfig_lib.
+
+2015-04-24 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Remove -V in grub-mkrescue.c
+ It clashhes with -V which is alias to -volid.
+
+2015-04-13 Toomas Soome <tsoome@me.com>
+
+ getroot: include sys/mkdev.h for makedev
+ Solaris (like) systems need to include sys/mkdev.h for makedev() function.
+
+2015-04-13 Toomas Soome <tsoome@me.com>
+
+ core/partmap: rename 'sun' to avoid clash with predefined symbol
+ the symbol “sun” is defined macro in solaris derived systems, from
+ gcc -dM -E:
+
+ and therefore can not be used as name.
+
+2015-04-12 Paul Menzel <paulepanter@users.sourceforge.net>
+
+ docs/grub.texi: Fix spelling of cbfstool
+
+2015-04-06 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ core: avoid NULL derefrence in grub_divmod64s
+ It can be called with NULL for third argument. grub_divmod32* for
+ now are called only from within wrappers, so skip check.
+
+ Reported-By: Michael Zimmermann <sigmaepsilon92@gmail.com>
+
+2015-03-28 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ do not emit cryptomount without crypto UUID
+
+2015-03-28 Sarah Newman <srn@prgmr.com>
+
+ grub-core/loader/i386/xen.c: Initialized initrd_ctx so we don't free a random pointer from the stack.
+
+2015-03-27 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ net: trivial grub_cpu_to_XX_compile_time cleanup
+
+2015-03-27 Lunar <lunar@torproject.org>
+
+ syslinux: Support {vesa,}menu.c32.
+
+2015-03-27 Steve McIntyre <steve@einval.com>
+
+ Recognize EFI platform even in case of mismatch between Linux and EFI.
+ Some x86 systems might be capable of running a 64-bit Linux kernel but
+ only use a 32-bit EFI (e.g. Intel Bay Trail systems). It's useful for
+ grub-install to be able to recognise such systems, to set the default
+ x86 platform correctly.
+
+ To allow grub-install to know the size of the firmware rather than
+ just the size of the kernel, there is now an extra EFI sysfs file to
+ describe the underlying firmware. Read that if possible, otherwise
+ fall back to the kernel type as before.
+
+2015-03-27 Michael Zimmermann <sigmaepsilon92@gmail.com>
+
+ Add missing initializers to silence suprious warnings.
+
+2015-03-27 Leif Lindholm <leif.lindholm@linaro.org>
+
+ dl_helper: Cleanup
+ Use the new thumb_get_instruction_word/thumb_set_instruction_word
+ helpers throughout.
+
+ Style cleanup (missing spaces).
+
+ Move Thumb MOVW/MOVT handlers into Thumb relocation section of file.
+
+2015-03-27 Martin Wilck <martin.wilck@ts.fujitsu.com>
+
+ efinet: Check for immediate completition.
+ This both speeds GRUB up and workarounds unexpected EFI behaviour.
+
+2015-03-27 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Make Makefile.util.def independent of platform.
+
+2015-03-27 Daniel Kahn Gillmor <dkg@fifthhorseman.net>
+
+ util/mkimage: Use stable timestamp when generating binaries.
+
+2015-03-27 Vladimir Serbinenko <phcoder@gmail.com>
+
+ modinfo.sh.in: Add missing config variables.
+
+ Makefile.core.def: Remove obsolete LDADD_KERNEL
+
+ arp, icmp: Fix handling in case of oversized or invalid packets.
+ This restrict ARP handling to MAC and IP addresses but in practice we need
+ only this case anyway and other cases are very rar if exist at all. It makes
+ code much simpler and less error-prone.
+
+2015-03-23 Colin Watson <cjwatson@ubuntu.com>
+
+ hostfs: Drop unnecessary feature test macros
+ _BSD_SOURCE was added to allow the use of DT_DIR, but that was removed
+ in e768b77068a0b030a07576852bd0f121c9a077eb. While adding
+ _DEFAULT_SOURCE as well works around problems with current glibc,
+ neither is in fact needed nowadays.
+
+2015-03-20 Vladimir Serbinenko <phcoder@gmail.com>
+
+ compiler-rt-emu: Add missing file.
+
+ emunet: Fix init error checking.
+ Otherwise emunet doesn't expose any cards.
+
+ fddboot_test: Add -no-pad to xorriso.
+
+ grub-mkrescue: pass all unrecognized options unchanged to xorriso.
+
+ cacheinfo: Add missing license information.
+
+2015-03-19 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ grub-fs-tester: add LVM RAID1 support
+ LVM miscalculates bitmap size with small extent, so start with 16K as
+ for other RAID types.
+
+ Until version 2.02.103 LVM counts metadata segments twice when checking
+ available space, reduce segment count by one to account for this bug.
+
+2015-03-19 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ core: add LVM RAID1 support
+ Closes 44534.
+
+2015-03-16 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ grub-fs-tester: explicitly set segment type for LVM mirror
+ LVM mirror defaults to RAID1 today and can be different on different
+ systems as set in lvm.conf.
+
+2015-03-15 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ grub-fs-tester: better estimation of filesystem time for LVM/RAID
+ Write activity with LVM/RAID can happen after filesystem is unmounted.
+ In my testing modification time of loop files was 15 - 20 seconds
+ after unmount. So use time as close to unmount as possible as
+ reference instead.
+
+2015-03-06 Vladimir Serbinenko <phcoder@gmail.com>
+
+ hfsplus: Fix potential access to uninited memory on invalid FS
+
+2015-03-06 Jon McCune <jonmccune@google.com>
+
+ autogen.sh: Allow overriding the python to be used by setting $PYTHON.
+ Some installations have several python versions installed. Allow user
+ to choose which one to use by setting $PYTHON.
+
+2015-03-05 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ update gnulib/argp-help.c to fix garbage in grub-mknetdir --help output
+ argp_help attempts to translate empty string, which results in printing
+ meta information about translation, like in
+
+ bor@opensuse:~/build/grub> grub2-mknetdir --help
+ Использование: grub2-mknetdir [ПАРАМЕТР…]
+ Project-Id-Version: grub 2.02-pre2
+ Report-Msgid-Bugs-To: bug-grub@gnu.org
+ ...
+
+ Update gnulib/argp-help.c to the current version which fixes this
+ (commit b9bfe78424b871f5b92e5ee9e7d21ef951a6801d).
+
+2015-03-05 Andrey Borzenkov <arvidjaar@gmail.com>
+
+ update m4/extern-inline.m4 to upstream version to fix compilation on FreeBSD
+ In file included from util/grub-mkimage.c:54:0:
+ ./grub-core/gnulib/argp.h:627:49: error: '__sbistype' is static but
+ used in inline function '_option_is_short' which is not static
+ [-Werror] cc1: all warnings being treated as errors gmake[2]: ***
+ [util/grub_mkimage-grub-mkimage.o] Error 1
+
+ Update m4/extern-inline.m4 to current upstream gnulib version that
+ contains fix for this (commit b9bfe78424b871f5b92e5ee9e7d21ef951a6801d).
+
+ Reported-By: Beeblebrox <zaphod@berentweb.com>
+
+2015-03-04 Vladimir Serbinenko <phcoder@gmail.com>
+
+ syslinux_parse: Fix the case of unknown localboot.
+ Reported by: Jordan Uggla
+
+ configure.ac: Fix the name of pciaccess header.
+
+ Fix canonicalize_file_name clash.
+ canonicalize_file_name clashed with gnulib function. Additionally
+ it was declared in 2 places: emu/misc.h and util/misc.h. Added
+ grub_ prefix and removed second declaration.
+
+2015-03-03 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Remove emu libusb support.
+ It's disabled by default and has been broken for a long time.
+ As nobody is interested in fixing and maintaining it, remove it.
+
+ configure.ac: Remove unused COND_clang
+
+ Remove libgcc dependency.
+ libgcc for boot environment isn't always present and compatible.
+ libgcc is often absent if endianness or bit-size at boot is different
+ from running OS.
+ libgcc may use optimised opcodes that aren't available on boot time.
+ So instead of relying on libgcc shipped with the compiler, supply
+ the functions in GRUB directly.
+ Tests are present to ensure that those replacement functions behave the
+ way compiler expects them to.
+
+ types.h: Use __builtin_bswap* with clang.
+ clang pretends to be GCC 4.2 but we use __builtin_bswap* only with GCC 4.3+.
+ clang support __builtin_bswap*, so use it.
+
+ configure.ac: Set $CPPFLAGS when checking for no_app_regs.
+ Fixes compilation for sparc64 with clang.
+
+ Don't continue to query block-size if disk doesn't have it.
+ Stops poluting screen with a lot of "block-size: exception -21".
+
+2015-02-28 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ grub-probe: free temporary variable
+
+2015-02-28 Vladimir Serbinenko <phcoder@gmail.com>
+
+ exclude.pot: Add new technical strings
+
+ grub-probe: Mark a "[default=]" for translation.
+
+ grub-shell: Add missing --locale-directory.
+ Fixes the language tests is no make install was done.
+
+ ntfs_test: Skip is setfattr is unavailable.
+
+2015-02-26 Vladimir Serbinenko <phcoder@gmail.com>
+
+ emu/cache: Change declaration of __clear_cache to match builtin declaration.
+ Fixes compile of arm64-emu.
+
+ arm/dl: Fix handling of nonstandard relocation sizes
+
+ gzio: Optimize by removing division.
+
+ raid6: Optimize by removing division.
+
+ dmraid_nvidia: Fix division by 0 and missing byte-swap.
+
+ crypto: restrict cipher block size to power of 2.
+ All current ciphers have blocks which are power of 2 and it's
+ unlikely to change. Other block length would be tricky to handle anyway.
+ This restriction allows avoiding extra divisions.
+
+ jpeg: Optimise by replacing division with shifts.
+
+ png: Optimize by avoiding divisions.
+
+ Add missing lib/division.c
+
+ fbblit: Optimize by replacing division with additions and shifts.
+
+ bitmap_scale: Optimize by moving division out of the loop.
+
+ minilzo: Skip parts tha we don't need.
+
+2015-02-23 Vladimir Serbinenko <phcoder@gmail.com>
+
+ mips: Fix soft-float handling.
+ Add -msoft-float alongside clang arguments to specify ABI.
+ Specify ABI in asm files explicitly.
+ This trigers asm warning due to gcc failing to propagate -msoft-float
+ but it's tolerable.
+
+ Add missing grub_ prefix in memcpy invocation
+
+ Allow clang compilation for thumb with -mthumb-interwork.
+ clang already uses -mthumb-interwork behaviour even thout it doesn't
+ support the option.
+
+ arm64: Fix compilation failure.
+ Don't supply +nosimd to asm files.
+ Otherwise +nosimd coming from flags forbids some of instructions
+ used in cache_flush.
+
+ Supply signed division to fix ARM compilation.
+ Previously we supplied only unsigned divisions on platforms that need software
+ division.
+ Yet compiler may itself use a signed division. A typical example would be a
+ difference between 2 pointers which involves division by object size.
+
+2015-02-22 Vladimir Serbinenko <phcoder@gmail.com>
+
+ acpi: Fix unused function warning.
+
+ configure.ac: Add ia64-specific way to disable floats.
+
+ i386/tsc: Fix unused function warning on xen.
+
+2015-02-22 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Experimental support for clang for sparc64.
+ Automatically discover command line options to make clang and
+ gcc behave in same way.
+
+ Tested with qemu.
+
+2015-02-22 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Discover which option provides soft-float on configure stage.
+ Deals with clang needing other arguments to stop issuing floating
+ instructions than gcc.
+
+2015-02-21 Vladimir Serbinenko <phcoder@gmail.com>
+
+ mips: Switch to more portable .org
+ Binary is unchanged.
+
+ sparc64: Switch to more portable .org.
+ Binaries are unchanged.
+
+ kernel-8086: Switch to more portable .org.
+
+ Relax requirements on asm for non-BIOS i386 platforms.
+ These platforms don't have a hard limit on size of resulting code16
+ code, so we don't care if assembly is bigger than necessarry.
+
+ qemu: Switch to more portable .org
+ Binary is checked identical.
+
+ qemu: Fix GateA20 enabling.
+ GateA20 code was inactive due to address error.
+
+ qemu: Fix compilation
+
+ Remove realmode.S from coreboot and qemu.
+ It's not used there.
+
+ Remove obsolete ADDR32 and DATA32 checks.
+
+ i386: Remove needless ADDR32 prefixes when address is known and fixed.
+ Shaves off 6 bytes in lzma_decompress.img.
+
+ i386-pc/boot: Explicitly mark kernel_address[_high] as local.
+ Otherwise apple asm might try to make accesses relocatable.
+
+ Change dot assignmnet to more portable .org.
+ Binary is unchanged (verified)
+
+ i386: Move from explicit ADDR32/DATA32 prefixes to instruction suffixes.
+ Is more portable.
+ Binary is unchanged (verified).
+
+ Test which flags make our asm compile.
+ Previously we relied on assumption that clang always needs -no-integrated-as
+ but it's not always true.
+
+ INSTALL: clarify that clang support is experimental
+
+ zfs/mzap_lookup: Fix argument types
+
+ wildcard: Mark unused argument as such.
+
+ ofdisk: Exclude floppies from scanning.
+ It causes similar hang as CD on at least the qemu.
+
+ configure: Add -msoft-float to CCASFLAGS
+ Otherwise mismatch between API flags triggers linker failure
+
+ mips/startup_raw: Use more portable .asciz
+
+ Provide __aeabi_mem{cpy,set}
+ Fixes ARM compilation
+
+ div_test: Don't try to divide by zero
+
+ INSTALL: Fix names of host flags to match actual behaviour
+
+ Strip .MIPS.abiflags which causes compile failure
+
+2015-02-20 Vladimir Serbinenko <phcoder@gmail.com>
+
+ configure: Move adding of include options to the very end to avoid subshell.
+
+ configure: Add missing comma.
+
+2015-02-16 Vladimir Serbinenko <phcoder@gmail.com>
+
+ ext2: Ignore INCOMPAT_MMP.
+ It's not really incompatible as long as driver never writes to FS.
+
+ ext2: Support META_BG.
+ This fixes bug that system would become unbootable after ext*
+ online resize if no resize_inode was created at ext* format time.
+
+2015-02-16 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ tests: remove hardcoded paths from syslinux_test
+ abs_top_srcdir appeared in Autoconf 2.52f. Minimal grub requirement
+ is 2.60 so we should be good here.
+
+ build-sys: add syslinux test files to tarball
+
+2015-02-16 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Add test for syslinux converter
+
+2015-02-16 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Don't remove initrd= parameter.
+ Based on simplified patch by Lunar.
+
+ Reported by: Lunar
+
+2015-02-16 Vladimir Serbinenko <phcoder@gmail.com>
+
+ syslinux_parse: Always output comments even if no entries are found.
+
+2015-02-15 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ diskfilter_make_raid: more memory leaks in failure path
+
+2015-02-14 Vladimir Serbinenko <phcoder@gmail.com>
+
+ disk/lvm: Use zalloc to ensure that segments are initialised to sane value.
+ Reported by: EmanueL Czirai.
+
+2015-02-14 Daniel Kiper <daniel.kiper@oracle.com>
+
+ multiboot2: Fix information request tag size calculation
+
+2015-02-14 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ diskfilter: fix double free of lv names for mdraid
+ Avoid micro-optimization in grub_diskfilter_make_raid and make sure
+ name and fullname are independent strings. This avoids need to special
+ case it everywhere else.
+
+ Also fix memory leak in failure case in grub_diskfilter_make_raid.
+
+ Closes: 41582
+
+2015-02-14 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ diskfilter: fix crash in validate_lv for mdraid arrays
+ Commit 750f4bacd3262376ced3f837d8dc78f834ca233a put LV validation before
+ actual vg assignment. Make grub_diskfilter_make_raid to assign ->vg as
+ happens in other cases for consistency. Also clean up redundant code and add
+ explicit NULL lv->vg check in validate_lv.
+
+ Also fix segment validation in validate_lv; it became obvious when crash
+ was fixed.
+
+ Closes: 44199
+
+2015-02-12 Jiri Slaby <jslaby@suse.cz>
+
+ util: mkimage, fix gcc5 build failure
+ gcc5 reports:
+ ../util/mkimage.c: In function 'grub_install_get_image_target':
+ ../util/mkimage.c:954:5: error: loop exit may only be reached after undefined behavior [-Werror=aggressive-loop-optimizations]
+ && j < ARRAY_SIZE (image_targets[i].names); j++)
+ ^
+ ../util/mkimage.c:953:39: note: possible undefined statement is here
+ for (j = 0; image_targets[i].names[j]
+ ^
+
+ Well, let's move the index 'j' test before accesing the array to:
+ 1) make the loop obvious
+ 2) make gcc happy
+
+2015-02-03 Leif Lindholm <leif.lindholm@linaro.org>
+
+ arm: implement additional relocations generated by gcc 4.9 at -O3
+ GCC 4.9 also generates R_ARM_THM_MOVW_ABS_NC and R_ARM_THM_MOVT_ABS,
+ as an alternative to ABS32.
+
+2015-01-30 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ setup: fix blocklist size calculation
+ Found by: Coverity scan.
+
+ grub-fstest: fix descriptor leak
+ Found by: Coverity scan.
+
+2015-01-30 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ net/pxe: fix error condition
+ Test return value of grub_netbuff_reserve(), buf itself cannot be
+ NULL here.
+
+ Found by: Coverity scan.
+
+2015-01-30 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ grub-mkimage: fix potential NULL pointer dereference
+ Move fatal check whether symtab_section is NULL before first reference.
+
+ Found by: Coverity scan.
+
+2015-01-30 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ net/ip: check result of grub_netbuff_push
+ Found by: Coverity scan.
+
+ tests: add test command file tests
+ This requires access to files in both host and grub image, so
+ implementing as separate test unit instead of script test was
+ more easy.
+
+ test: consistently use TMPDIR and same name pattern for temp files
+
+ test: fix previous commit - we need to return from subexpression
+ ( ... ) was processed recursively, we need to return from it. Revert
+ this change.
+
+ test: do not stop after first file test or closing bracket
+ Closes: 44115
+
+2015-01-28 Leif Lindholm <leif.lindholm@linaro.org>
+
+ configure.ac: don't use -msoft-float for arm64
+ aarch64 toolchains do not support the -msoft-float option added by
+ commit 3661261f. Insted, for arm64 use -march=armv8-a+nofp+nosimd.
+
+ Reported-by: Ryan Harkin <ryan.harkin@linaro.org>
+
+2015-01-28 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ script/execute.c: fix memory leak.
+ Make sure to continue loop over array after failure to free
+ allocated strings.
+
+ Found by: Coverity scan.
+
+2015-01-28 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ syslinux_parse: fix memory leak.
+ Found by: Coverity scan.
+
+2015-01-27 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ Change quotes to match overall style in NEWS
+
+ loader/xnu: fix memory leak.
+ Foound by: Coverity scan.
+
+ util/grub-probe: fix memory leaks.
+ Found by: Coverity scan.
+
+ fs/hfsplus: fix memory leak.
+ Found by: Coverity scan.
+
+ fs/zfs/zfscrypt.c: fix indentation.
+
+ fs/zfs/zfscrypt.c: fix memory leaks.
+ Found by: Coverity scan.
+
+ commands/parttool: fix memory leak.
+ Found by: Coverity scan.
+
+ fs/zfs/zfs.c: fix memory leak.
+ Found by: Coverity scan.
+
+ linux/ofpath: fix descriptor leak
+ Found by: Coverity scan
+
+ linux/hostdisk: use strncpy instead of strlcpy
+ strlcpy is not available on Linux as part of standard libraries.
+ It probably is not worth extra configure checks espicially as we
+ need to handle missing function anyway.
+
+2015-01-27 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Document intentional fallthroughs.
+ Found by: Coverity scan.
+
+ linux/ofpath: Fix error handling.
+ Found by: Coverity Scan.
+
+ linux/hostdisk: Limit strcpy size to buffer size.
+ Found by: Coverity scan.
+
+ fs/zfscrypt: Add missing explicit cast.
+ Found by: Coverity scan.
+
+ fs/zfs: Fix error handling.
+ Found by: Coverity Scan.
+
+2015-01-27 Vladimir Serbinenko <phcoder@gmail.com>
+
+ fs/{cbfs,cpio}: Remove useless check if mode is NULL.
+ Callers already ensure that it's not null.
+
+ Found by: Coverity Scan.
+
+2015-01-27 Vladimir Serbinenko <phcoder@gmail.com>
+
+ commands/acpi: Use ALIGN_UP rather than manual expression.
+ Improves readability and hopefully automatic scanning.
+
+ Found by: Coverity Scan.
+
+2015-01-26 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ util/setup: fix memory leak.
+ Found by: Coverity scan.
+
+ util/mkimage: fix memory leaks.
+ Found by: Coverity scan.
+
+ util/grub-mount: fix descriptor leak.
+ Found by: Coverity scan.
+
+ util/grub-mkstandalone: fix memory leak.
+ Found by: Coverity scan.
+
+ util/grub-install: rearrange code to avoid memory leak.
+ Found by: Coverity scan.
+
+ linux/getroot: fix memory leak.
+ Found by: Coverity scan.
+
+ util/install: fix memory leak.
+ Found by: Coverity scan.
+
+ util/setup: fix memory leak.
+ Found by: Coverity scan.
+
+ linux/ofpath: fix various memory leaks.
+ Found by: Coverity scan.
+
+ linux/getroot: fix descriptor leak.
+ Found by: Coverity scan.
+
+2015-01-26 Vladimir Serbinenko <phcoder@gmail.com>
+
+ util/misc.c: Check ftello return value.
+ Found by: Coverity scan.
+
+ grub-macbless: Fix resource leak.
+ Found by: Coverity scan.
+
+ grub-install: Fix memory leak.
+ Found by: Coverity scan.
+
+ grub-install-common: Fix sizeof usage.
+ Found by: Coverity scan.
+
+ util/getroot: Add missing grub_disk_close.
+ Found by: Coverity scan.
+
+ vbe: Fix incorrect register usage.
+ Found by: Coverity scan.
+
+ unix/password: Fix file descriptor leak.
+ Found by: Coverity scan.
+
+ linux/getroot: Fix error handling.
+ Found by: Coverity scan.
+
+ linux/blocklist: Fix memory leak.
+ Found by: Coverity scan.
+
+ devmapper/getroot: Fix memory leak.
+ Found by: Coverity scan.
+
+ normal/misc: Close device on all pathes.
+ Found by: Coverity scan.
+
+ normal/main: Fix error handling.
+ Found by: Coverity scan.
+
+ xnu: Add missing error check.
+ Found by: Coveriy scan.
+
+ plan9: Add missing grub_device_close.
+ Found by: Coverity scan.
+
+ multiboot: Simplify to avoid confusing assignment.
+ Found by: Coverity scan.
+
+ bsd: Add missing null-pointer check.
+ Found by: Coverity scan.
+
+ lib/syslinux_parse: Add missing error check.
+ Found by: Coverity scan.
+
+ lib/syslinux_parse: Fix memory leak.
+ Found by: Coveriy scan.
+
+ lib/syslinux_parse: Add missing alloc check.
+ Found by: Coverity scan.
+
+ i386/pc/mmap: Fix memset size.
+ Found by: Coverity scan.
+
+ gfxmenu/theme_loader: Add missing allos error check.
+ Found by: Coverity scan.
+
+ gfxmenu/icon_manager: Fix null pointer dereference.
+ Found by: Coverity scan.
+
+ fs/ufs: Add missing error check.
+ Found by: Coverity scan.
+
+ configure.ac: Always add -D_FILE_OFFSET_BITS=64.
+
+2015-01-25 Vladimir Serbinenko <phcoder@gmail.com>
+
+ fs/sfs: Fix error check and add sanity check.
+ Found by: Coverity scan.
+
+ fs/reiserfs: Fix sector count overflow.
+ Found by: Coverity scan.
+
+ fs/ntfs: Add sizes sanity checks.
+ Found by: Coverity scan.
+
+ fs/ntfs: Add missing free.
+ Found by: Coverity scan.
+
+2015-01-25 Vladimir Serbinenko <phcoder@gmail.com>
+
+ fs/minix: Fix sector promotion to 64-bit.
+ While on it make GRUB_MINIX_ZONE2SECT into function.
+
+ Found by: Coverity scan
+
+2015-01-25 Vladimir Serbinenko <phcoder@gmail.com>
+
+ grub_iso9660_read: Explicitly check read_node return value.
+ Not really needed as grub_errno is already checked but is nicer.
+
+ Found by: Coverity scan.
+
+2015-01-25 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ commands/fileXX: Fix remaining memory leak.
+ Found by: Coverity Scan.
+
+2015-01-25 Vladimir Serbinenko <phcoder@gmail.com>
+
+ fs/hfs: Add pointer sanity checks.
+ Found by: Coverity scan.
+
+ fs/hfs/hfs_open: Check that mount succeeded.
+ Found by: Coverity scan.
+
+ fs/fat: Fix codepath to properly free on error.
+ Found by: Coverity scan.
+
+ fs/cpio_common: Add a sanity check on namesize.
+ Found by: Coverity scan.
+
+ fs/cbfs: Add missing free.
+ Found by: Coverity scan.
+
+2015-01-24 Vladimir Serbinenko <phcoder@gmail.com>
+
+ font: Add missing free.
+ Found by: Coverity Scan.
+
+ biosdisk: Add missing cast.
+ Found by: Coverity scan.
+
+ disk/geli: Add missing free.
+ Found by: Coverity scan.
+
+ disk/geli: Add missing seek success check.
+ Found by: Coverity scan.
+
+ disk/diskfilter: Add missing lv presence check.
+ Found by: Coverity scan.
+
+ disk/cryptodisk: Add missing error check.
+ Found by: Coverity scan.
+
+2015-01-24 Vladimir Serbinenko <phcoder@gmail.com>
+
+ disk/ahci: Fix device_map_range argument.
+ Argument is not used on x86, hence it's gone unnoticed.
+
+ Found by: Coverity scan.
+
+2015-01-24 Vladimir Serbinenko <phcoder@gmail.com>
+
+ disk/AFsplitter: check argument validity before doing any allocs.
+ This avoids possible memory leaks.
+
+ Found by: Coverity scan.
+
+2015-01-24 Vladimir Serbinenko <phcoder@gmail.com>
+
+ commands/wildcard: Add missing free.
+ Found by: Coverity scan.
+
+ commands/verify: Fix sha1 context zeroing-out.
+ Current code doesn't zero-out context completely. It's a minor issue
+ really as sha1 init already takes care of initing the context.
+
+ commands/tr: Simplify and fix missing parameter test.
+ Found by: Coverity scan
+
+ commands/syslinux: Add missing free.
+ Found by: Coverity scan.
+
+ commands/parttool: Add missing device close.
+ Found by: Coverity scan.
+
+ commands/nativedisk: Add missing device_close.
+ Found by: Coverity scan.
+
+2015-01-24 Vladimir Serbinenko <phcoder@gmail.com>
+
+ commands/macbless: Handle device opening errors correctly.
+ Wrong variable was checked for errors.
+
+ Found by: Coverity scan.
+
+2015-01-24 Vladimir Serbinenko <phcoder@gmail.com>
+
+ commands/macbless: Fix potential overflow.
+ Is a minor concern as no such FS would be created under normal circumstances
+ and failure was benign.
+
+ Found by: Coverity scan.
+
+2015-01-24 Vladimir Serbinenko <phcoder@gmail.com>
+
+ commands/macbless: Remove incorrect grub_free.
+ Found by: Coverity Scan
+
+ commands/legacycfg: Fix resource leaks.
+
+ zfs: Fix disk-matching logic.
+ Reported by: Tim Chase <dweeezil>
+
+ commands/hdparm: Add missing grub_disk_close.
+ Found by: Coverity scan.
+
+ gptsync: Add missing device_close.
+ Found by: Coverity scan
+
+ commands/fileXX: Fix memory leak.
+ Found by: Coverity Scan.
+
+2015-01-24 Vladimir Serbinenko <phcoder@gmail.com>
+
+ commands/file: Change the confusing loop stop condition.
+ Old condition was used to zero-out header variable on exit of the loop.
+ This is correct but confusing. Replace with in-loop logic.
+
+ Found by: Coverity Scan.
+
+2015-01-24 Vladimir Serbinenko <phcoder@gmail.com>
+
+ commands/acpi: Use ALIGN_UP rather than manual expression.
+ Improves readability and hopefully automatic scanning.
+
+ Found by: Coverity Scan.
+
+2015-01-24 Vladimir Serbinenko <phcoder@gmail.com>
+
+ uhci: Fix null pointer dereference.
+ Found by: Coverity scan.
+
+ Always add -msoft-float to avoid compiler generating float arithmetics.
+
+2015-01-24 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Generate empty ChangeLog if no .git is available.
+ When making dist from a git snapshot without repo available make dist would
+ fail to find ChangeLog. Generate empty ChangeLog if no ChangeLog is already
+ present and repo is not available.
+
+ Reported by: Andrei Borzenkov <arvidjaar@gmail.com>
+
+2015-01-24 Vladimir Serbinenko <phcoder@gmail.com>
+
+ Makefile.am: Fix Changelog cutoff address.
+ gitlog-to-changelog Doesn't generate entries for cutoff day, only
+ for days after the cutoff date, adjust by one to compensate.
+
+ efidisk: Return the determined root disk even if partition is unknown.
+
+ util/grub-mkrescue.c: Always include part_msdos and part_gpt on EFI.
+ When booted from stick, EFI would use GPT partition and our root
+ device detection algortihm depends on GRUB's ability to see the same
+ partitions. Hence include msdos and gpt partmap modules on EFI even when
+ they're not needed to access root filesystem.
+
+ conf/Makefile.common: Remove unused {LD,C}FLAGS_CPU.
+
+ Autogenerate ChangeLog from git changelog.
+ Old ChangeLog is moved to ChangeLog-2015. For all changes starting from
+ this one ChangeLog will be generated from gitlog only on explicit make
+ invocation and make dist.
+
+2015-01-23 Vladimir Serbinenko <phcoder@gmail.com>
+
+ * tests/file_filter/file: Really add missing file.
+
+2015-01-23 Andrei Borzenkov <arvidjaar@gmail.com>
+
+ Mention platform "none" in NEWS
+
+2015-01-23 Andrey Borzenkov <arvidjaar@gmail.com>
+
+ accept also hdX as alias to native Xen disk name
+ To be compatible with legacy pv-grub, sort disks by increasing order of handle
+ value. This allows reusing legacy pv-grub menu.lst which is using hdX names.
+
+ Suggested-By: Michael Chang <mchang@suse.com>
+ Closes: 44026