Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 836 insertions, 0 deletions

diff --git a/basegfx/source/polygon/b3dpolygontools.cxx b/basegfx/source/polygon/b3dpolygontools.cxx
new file mode 100644
index 000000000..bf982f9c3
--- /dev/null
+++ b/basegfx/source/polygon/b3dpolygontools.cxx
@@ -0,0 +1,836 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <osl/diagnose.h>
+#include <basegfx/polygon/b3dpolygontools.hxx>
+#include <basegfx/polygon/b3dpolygon.hxx>
+#include <basegfx/polygon/b3dpolypolygon.hxx>
+#include <basegfx/numeric/ftools.hxx>
+#include <basegfx/range/b3drange.hxx>
+#include <basegfx/point/b2dpoint.hxx>
+#include <basegfx/tuple/b3ituple.hxx>
+#include <rtl/math.hxx>
+#include <numeric>
+
+namespace basegfx::utils
+{
+        // B3DPolygon tools
+        void checkClosed(B3DPolygon& rCandidate)
+        {
+            while(rCandidate.count() > 1
+                && rCandidate.getB3DPoint(0).equal(rCandidate.getB3DPoint(rCandidate.count() - 1)))
+            {
+                rCandidate.setClosed(true);
+                rCandidate.remove(rCandidate.count() - 1);
+            }
+        }
+
+        sal_uInt32 getIndexOfSuccessor(sal_uInt32 nIndex, const B3DPolygon& rCandidate)
+        {
+            OSL_ENSURE(nIndex < rCandidate.count(), "getIndexOfPredecessor: Access to polygon out of range (!)");
+
+            if(nIndex + 1 < rCandidate.count())
+            {
+                return nIndex + 1;
+            }
+            else
+            {
+                return 0;
+            }
+        }
+
+        B3DRange getRange(const B3DPolygon& rCandidate)
+        {
+            B3DRange aRetval;
+            const sal_uInt32 nPointCount(rCandidate.count());
+
+            for(sal_uInt32 a(0); a < nPointCount; a++)
+            {
+                const B3DPoint aTestPoint(rCandidate.getB3DPoint(a));
+                aRetval.expand(aTestPoint);
+            }
+
+            return aRetval;
+        }
+
+        double getLength(const B3DPolygon& rCandidate)
+        {
+            double fRetval(0.0);
+            const sal_uInt32 nPointCount(rCandidate.count());
+
+            if(nPointCount > 1)
+            {
+                const sal_uInt32 nLoopCount(rCandidate.isClosed() ? nPointCount : nPointCount - 1);
+
+                for(sal_uInt32 a(0); a < nLoopCount; a++)
+                {
+                    const sal_uInt32 nNextIndex(getIndexOfSuccessor(a, rCandidate));
+                    const B3DPoint aCurrentPoint(rCandidate.getB3DPoint(a));
+                    const B3DPoint aNextPoint(rCandidate.getB3DPoint(nNextIndex));
+                    const B3DVector aVector(aNextPoint - aCurrentPoint);
+                    fRetval += aVector.getLength();
+                }
+            }
+
+            return fRetval;
+        }
+
+        void applyLineDashing(
+            const B3DPolygon& rCandidate,
+            const std::vector<double>& rDotDashArray,
+            B3DPolyPolygon* pLineTarget,
+            double fDotDashLength)
+        {
+            // clear targets in any case
+            if(pLineTarget)
+            {
+                pLineTarget->clear();
+            }
+
+            // provide callback as lambda
+            auto aLineCallback(
+                nullptr == pLineTarget
+                ? std::function<void(const basegfx::B3DPolygon&)>()
+                : [&pLineTarget](const basegfx::B3DPolygon& rSnippet){ pLineTarget->append(rSnippet); });
+
+            // call version that uses callbacks
+            applyLineDashing(
+                rCandidate,
+                rDotDashArray,
+                aLineCallback,
+                fDotDashLength);
+        }
+
+        static void implHandleSnippet(
+            const B3DPolygon& rSnippet,
+            std::function<void(const basegfx::B3DPolygon& rSnippet)>& rTargetCallback,
+            B3DPolygon& rFirst,
+            B3DPolygon& rLast)
+        {
+            if(rSnippet.isClosed())
+            {
+                if(!rFirst.count())
+                {
+                    rFirst = rSnippet;
+                }
+                else
+                {
+                    if(rLast.count())
+                    {
+                        rTargetCallback(rLast);
+                    }
+
+                    rLast = rSnippet;
+                }
+            }
+            else
+            {
+                rTargetCallback(rSnippet);
+            }
+        }
+
+        static void implHandleFirstLast(
+            std::function<void(const basegfx::B3DPolygon& rSnippet)>& rTargetCallback,
+            B3DPolygon& rFirst,
+            B3DPolygon& rLast)
+        {
+            if(rFirst.count() && rLast.count()
+                && rFirst.getB3DPoint(0).equal(rLast.getB3DPoint(rLast.count() - 1)))
+            {
+                // start of first and end of last are the same -> merge them
+                rLast.append(rFirst);
+                rLast.removeDoublePoints();
+                rFirst.clear();
+            }
+
+            if(rLast.count())
+            {
+                rTargetCallback(rLast);
+            }
+
+            if(rFirst.count())
+            {
+                rTargetCallback(rFirst);
+            }
+        }
+
+        void applyLineDashing(
+            const B3DPolygon& rCandidate,
+            const std::vector<double>& rDotDashArray,
+            std::function<void(const basegfx::B3DPolygon& rSnippet)> aLineTargetCallback,
+            double fDotDashLength)
+        {
+            const sal_uInt32 nPointCount(rCandidate.count());
+            const sal_uInt32 nDotDashCount(rDotDashArray.size());
+
+            if(fTools::lessOrEqual(fDotDashLength, 0.0))
+            {
+                fDotDashLength = std::accumulate(rDotDashArray.begin(), rDotDashArray.end(), 0.0);
+            }
+
+            if(fTools::lessOrEqual(fDotDashLength, 0.0) || !aLineTargetCallback || !nPointCount)
+            {
+                // parameters make no sense, just add source to targets
+                if(aLineTargetCallback)
+                {
+                    aLineTargetCallback(rCandidate);
+                }
+
+                return;
+            }
+
+            // precalculate maximal acceptable length of candidate polygon assuming
+            // we want to create a maximum of fNumberOfAllowedSnippets. In 3D
+            // use less for fNumberOfAllowedSnippets, ca. 6553.6, double due to line & gap.
+            // Less in 3D due to potentially blowing up to rounded line segments.
+            static double fNumberOfAllowedSnippets(6553.5 * 2.0);
+            const double fAllowedLength((fNumberOfAllowedSnippets * fDotDashLength) / double(rDotDashArray.size()));
+            const double fCandidateLength(basegfx::utils::getLength(rCandidate));
+            std::vector<double> aDotDashArray(rDotDashArray);
+
+            if(fCandidateLength > fAllowedLength)
+            {
+                // we would produce more than fNumberOfAllowedSnippets, so
+                // adapt aDotDashArray to exactly produce assumed number. Also
+                // assert this to let the caller know about it.
+                // If this asserts: Please think about checking your DotDashArray
+                // before calling this function or evtl. use the callback version
+                // to *not* produce that much of data. Even then, you may still
+                // think about producing too much runtime (!)
+                assert(true && "applyLineDashing: potentially too expensive to do the requested dismantle - please consider stretched LineDash pattern (!)");
+
+                // calculate correcting factor, apply to aDotDashArray and fDotDashLength
+                // to enlarge these as needed
+                const double fFactor(fCandidateLength / fAllowedLength);
+                std::for_each(aDotDashArray.begin(), aDotDashArray.end(), [&fFactor](double &f){ f *= fFactor; });
+                fDotDashLength *= fFactor;
+            }
+
+            // prepare current edge's start
+            B3DPoint aCurrentPoint(rCandidate.getB3DPoint(0));
+            const bool bIsClosed(rCandidate.isClosed());
+            const sal_uInt32 nEdgeCount(bIsClosed ? nPointCount : nPointCount - 1);
+
+            // prepare DotDashArray iteration and the line/gap switching bool
+            sal_uInt32 nDotDashIndex(0);
+            bool bIsLine(true);
+            double fDotDashMovingLength(aDotDashArray[0]);
+            B3DPolygon aSnippet;
+
+            // remember 1st and last snippets to try to merge after execution
+            // is complete and hand to callback
+            B3DPolygon aFirstLine, aLastLine;
+
+            // iterate over all edges
+            for(sal_uInt32 a(0); a < nEdgeCount; a++)
+            {
+                // update current edge
+                const sal_uInt32 nNextIndex((a + 1) % nPointCount);
+                const B3DPoint aNextPoint(rCandidate.getB3DPoint(nNextIndex));
+                const double fEdgeLength(B3DVector(aNextPoint - aCurrentPoint).getLength());
+
+                if(!fTools::equalZero(fEdgeLength))
+                {
+                    double fLastDotDashMovingLength(0.0);
+                    while(fTools::less(fDotDashMovingLength, fEdgeLength))
+                    {
+                        // new split is inside edge, create and append snippet [fLastDotDashMovingLength, fDotDashMovingLength]
+                        const bool bHandleLine(bIsLine && aLineTargetCallback);
+
+                        if(bHandleLine)
+                        {
+                            if(!aSnippet.count())
+                            {
+                                aSnippet.append(interpolate(aCurrentPoint, aNextPoint, fLastDotDashMovingLength / fEdgeLength));
+                            }
+
+                            aSnippet.append(interpolate(aCurrentPoint, aNextPoint, fDotDashMovingLength / fEdgeLength));
+
+                            implHandleSnippet(aSnippet, aLineTargetCallback, aFirstLine, aLastLine);
+
+                            aSnippet.clear();
+                        }
+
+                        // prepare next DotDashArray step and flip line/gap flag
+                        fLastDotDashMovingLength = fDotDashMovingLength;
+                        fDotDashMovingLength += aDotDashArray[(++nDotDashIndex) % nDotDashCount];
+                        bIsLine = !bIsLine;
+                    }
+
+                    // append snippet [fLastDotDashMovingLength, fEdgeLength]
+                    const bool bHandleLine(bIsLine && aLineTargetCallback);
+
+                    if(bHandleLine)
+                    {
+                        if(!aSnippet.count())
+                        {
+                            aSnippet.append(interpolate(aCurrentPoint, aNextPoint, fLastDotDashMovingLength / fEdgeLength));
+                        }
+
+                        aSnippet.append(aNextPoint);
+                    }
+
+                    // prepare move to next edge
+                    fDotDashMovingLength -= fEdgeLength;
+                }
+
+                // prepare next edge step (end point gets new start point)
+                aCurrentPoint = aNextPoint;
+            }
+
+            // append last intermediate results (if exists)
+            if(aSnippet.count())
+            {
+                const bool bHandleLine(bIsLine && aLineTargetCallback);
+
+                if(bHandleLine)
+                {
+                    implHandleSnippet(aSnippet, aLineTargetCallback, aFirstLine, aLastLine);
+                }
+            }
+
+            if(bIsClosed && aLineTargetCallback)
+            {
+                implHandleFirstLast(aLineTargetCallback, aFirstLine, aLastLine);
+            }
+        }
+
+        B3DPolygon applyDefaultNormalsSphere( const B3DPolygon& rCandidate, const B3DPoint& rCenter)
+        {
+            B3DPolygon aRetval(rCandidate);
+
+            for(sal_uInt32 a(0); a < aRetval.count(); a++)
+            {
+                B3DVector aVector(aRetval.getB3DPoint(a) - rCenter);
+                aVector.normalize();
+                aRetval.setNormal(a, aVector);
+            }
+
+            return aRetval;
+        }
+
+        B3DPolygon invertNormals( const B3DPolygon& rCandidate)
+        {
+            B3DPolygon aRetval(rCandidate);
+
+            if(aRetval.areNormalsUsed())
+            {
+                for(sal_uInt32 a(0); a < aRetval.count(); a++)
+                {
+                    aRetval.setNormal(a, -aRetval.getNormal(a));
+                }
+            }
+
+            return aRetval;
+        }
+
+        B3DPolygon applyDefaultTextureCoordinatesParallel( const B3DPolygon& rCandidate, const B3DRange& rRange, bool bChangeX, bool bChangeY)
+        {
+            B3DPolygon aRetval(rCandidate);
+
+            if(bChangeX || bChangeY)
+            {
+                // create projection of standard texture coordinates in (X, Y) onto
+                // the 3d coordinates straight
+                const double fWidth(rRange.getWidth());
+                const double fHeight(rRange.getHeight());
+                const bool bWidthSet(!fTools::equalZero(fWidth));
+                const bool bHeightSet(!fTools::equalZero(fHeight));
+                const double fOne(1.0);
+
+                for(sal_uInt32 a(0); a < aRetval.count(); a++)
+                {
+                    const B3DPoint aPoint(aRetval.getB3DPoint(a));
+                    B2DPoint aTextureCoordinate(aRetval.getTextureCoordinate(a));
+
+                    if(bChangeX)
+                    {
+                        if(bWidthSet)
+                        {
+                            aTextureCoordinate.setX((aPoint.getX() - rRange.getMinX()) / fWidth);
+                        }
+                        else
+                        {
+                            aTextureCoordinate.setX(0.0);
+                        }
+                    }
+
+                    if(bChangeY)
+                    {
+                        if(bHeightSet)
+                        {
+                            aTextureCoordinate.setY(fOne - ((aPoint.getY() - rRange.getMinY()) / fHeight));
+                        }
+                        else
+                        {
+                            aTextureCoordinate.setY(fOne);
+                        }
+                    }
+
+                    aRetval.setTextureCoordinate(a, aTextureCoordinate);
+                }
+            }
+
+            return aRetval;
+        }
+
+        B3DPolygon applyDefaultTextureCoordinatesSphere( const B3DPolygon& rCandidate, const B3DPoint& rCenter, bool bChangeX, bool bChangeY)
+        {
+            B3DPolygon aRetval(rCandidate);
+
+            if(bChangeX || bChangeY)
+            {
+                // create texture coordinates using sphere projection to cartesian coordinates,
+                // use object's center as base
+                const double fOne(1.0);
+                const sal_uInt32 nPointCount(aRetval.count());
+                bool bPolarPoints(false);
+                sal_uInt32 a;
+
+                // create center cartesian coordinates to have a possibility to decide if on boundary
+                // transitions which value to choose
+                const B3DRange aPlaneRange(getRange(rCandidate));
+                const B3DPoint aPlaneCenter(aPlaneRange.getCenter() - rCenter);
+                const double fXCenter(fOne - ((atan2(aPlaneCenter.getZ(), aPlaneCenter.getX()) + F_PI) / F_2PI));
+
+                for(a = 0; a < nPointCount; a++)
+                {
+                    const B3DVector aVector(aRetval.getB3DPoint(a) - rCenter);
+                    const double fY(fOne - ((atan2(aVector.getY(), aVector.getXZLength()) + F_PI2) / F_PI));
+                    B2DPoint aTexCoor(aRetval.getTextureCoordinate(a));
+
+                    if(fTools::equalZero(fY))
+                    {
+                        // point is a north polar point, no useful X-coordinate can be created.
+                        if(bChangeY)
+                        {
+                            aTexCoor.setY(0.0);
+
+                            if(bChangeX)
+                            {
+                                bPolarPoints = true;
+                            }
+                        }
+                    }
+                    else if(fTools::equal(fY, fOne))
+                    {
+                        // point is a south polar point, no useful X-coordinate can be created. Set
+                        // Y-coordinate, though
+                        if(bChangeY)
+                        {
+                            aTexCoor.setY(fOne);
+
+                            if(bChangeX)
+                            {
+                                bPolarPoints = true;
+                            }
+                        }
+                    }
+                    else
+                    {
+                        double fX(fOne - ((atan2(aVector.getZ(), aVector.getX()) + F_PI) / F_2PI));
+
+                        // correct cartesian point coordinate dependent from center value
+                        if(fX > fXCenter + 0.5)
+                        {
+                            fX -= fOne;
+                        }
+                        else if(fX < fXCenter - 0.5)
+                        {
+                            fX += fOne;
+                        }
+
+                        if(bChangeX)
+                        {
+                            aTexCoor.setX(fX);
+                        }
+
+                        if(bChangeY)
+                        {
+                            aTexCoor.setY(fY);
+                        }
+                    }
+
+                    aRetval.setTextureCoordinate(a, aTexCoor);
+                }
+
+                if(bPolarPoints)
+                {
+                    // correct X-texture coordinates if polar points are contained. Those
+                    // coordinates cannot be correct, so use prev or next X-coordinate
+                    for(a = 0; a < nPointCount; a++)
+                    {
+                        B2DPoint aTexCoor(aRetval.getTextureCoordinate(a));
+
+                        if(fTools::equalZero(aTexCoor.getY()) || fTools::equal(aTexCoor.getY(), fOne))
+                        {
+                            // get prev, next TexCoor and test for pole
+                            const B2DPoint aPrevTexCoor(aRetval.getTextureCoordinate(a ? a - 1 : nPointCount - 1));
+                            const B2DPoint aNextTexCoor(aRetval.getTextureCoordinate((a + 1) % nPointCount));
+                            const bool bPrevPole(fTools::equalZero(aPrevTexCoor.getY()) || fTools::equal(aPrevTexCoor.getY(), fOne));
+                            const bool bNextPole(fTools::equalZero(aNextTexCoor.getY()) || fTools::equal(aNextTexCoor.getY(), fOne));
+
+                            if(!bPrevPole && !bNextPole)
+                            {
+                                // both no poles, mix them
+                                aTexCoor.setX((aPrevTexCoor.getX() + aNextTexCoor.getX()) / 2.0);
+                            }
+                            else if(!bNextPole)
+                            {
+                                // copy next
+                                aTexCoor.setX(aNextTexCoor.getX());
+                            }
+                            else
+                            {
+                                // copy prev, even if it's a pole, hopefully it is already corrected
+                                aTexCoor.setX(aPrevTexCoor.getX());
+                            }
+
+                            aRetval.setTextureCoordinate(a, aTexCoor);
+                        }
+                    }
+                }
+            }
+
+            return aRetval;
+        }
+
+        bool isInside(const B3DPolygon& rCandidate, const B3DPoint& rPoint, bool bWithBorder)
+        {
+            if(bWithBorder && isPointOnPolygon(rCandidate, rPoint))
+            {
+                return true;
+            }
+            else
+            {
+                bool bRetval(false);
+                const B3DVector aPlaneNormal(rCandidate.getNormal());
+
+                if(!aPlaneNormal.equalZero())
+                {
+                    const sal_uInt32 nPointCount(rCandidate.count());
+
+                    if(nPointCount)
+                    {
+                        B3DPoint aCurrentPoint(rCandidate.getB3DPoint(nPointCount - 1));
+                        const double fAbsX(fabs(aPlaneNormal.getX()));
+                        const double fAbsY(fabs(aPlaneNormal.getY()));
+                        const double fAbsZ(fabs(aPlaneNormal.getZ()));
+
+                        if(fAbsX > fAbsY && fAbsX > fAbsZ)
+                        {
+                            // normal points mostly in X-Direction, use YZ-Polygon projection for check
+                            // x -> y, y -> z
+                            for(sal_uInt32 a(0); a < nPointCount; a++)
+                            {
+                                const B3DPoint aPreviousPoint(aCurrentPoint);
+                                aCurrentPoint = rCandidate.getB3DPoint(a);
+
+                                // cross-over in Z?
+                                const bool bCompZA(fTools::more(aPreviousPoint.getZ(), rPoint.getZ()));
+                                const bool bCompZB(fTools::more(aCurrentPoint.getZ(), rPoint.getZ()));
+
+                                if(bCompZA != bCompZB)
+                                {
+                                    // cross-over in Y?
+                                    const bool bCompYA(fTools::more(aPreviousPoint.getY(), rPoint.getY()));
+                                    const bool bCompYB(fTools::more(aCurrentPoint.getY(), rPoint.getY()));
+
+                                    if(bCompYA == bCompYB)
+                                    {
+                                        if(bCompYA)
+                                        {
+                                            bRetval = !bRetval;
+                                        }
+                                    }
+                                    else
+                                    {
+                                        const double fCompare(
+                                            aCurrentPoint.getY() - (aCurrentPoint.getZ() - rPoint.getZ()) *
+                                            (aPreviousPoint.getY() - aCurrentPoint.getY()) /
+                                            (aPreviousPoint.getZ() - aCurrentPoint.getZ()));
+
+                                        if(fTools::more(fCompare, rPoint.getY()))
+                                        {
+                                            bRetval = !bRetval;
+                                        }
+                                    }
+                                }
+                            }
+                        }
+                        else if(fAbsY > fAbsX && fAbsY > fAbsZ)
+                        {
+                            // normal points mostly in Y-Direction, use XZ-Polygon projection for check
+                            // x -> x, y -> z
+                            for(sal_uInt32 a(0); a < nPointCount; a++)
+                            {
+                                const B3DPoint aPreviousPoint(aCurrentPoint);
+                                aCurrentPoint = rCandidate.getB3DPoint(a);
+
+                                // cross-over in Z?
+                                const bool bCompZA(fTools::more(aPreviousPoint.getZ(), rPoint.getZ()));
+                                const bool bCompZB(fTools::more(aCurrentPoint.getZ(), rPoint.getZ()));
+
+                                if(bCompZA != bCompZB)
+                                {
+                                    // cross-over in X?
+                                    const bool bCompXA(fTools::more(aPreviousPoint.getX(), rPoint.getX()));
+                                    const bool bCompXB(fTools::more(aCurrentPoint.getX(), rPoint.getX()));
+
+                                    if(bCompXA == bCompXB)
+                                    {
+                                        if(bCompXA)
+                                        {
+                                            bRetval = !bRetval;
+                                        }
+                                    }
+                                    else
+                                    {
+                                        const double fCompare(
+                                            aCurrentPoint.getX() - (aCurrentPoint.getZ() - rPoint.getZ()) *
+                                            (aPreviousPoint.getX() - aCurrentPoint.getX()) /
+                                            (aPreviousPoint.getZ() - aCurrentPoint.getZ()));
+
+                                        if(fTools::more(fCompare, rPoint.getX()))
+                                        {
+                                            bRetval = !bRetval;
+                                        }
+                                    }
+                                }
+                            }
+                        }
+                        else
+                        {
+                            // normal points mostly in Z-Direction, use XY-Polygon projection for check
+                            // x -> x, y -> y
+                            for(sal_uInt32 a(0); a < nPointCount; a++)
+                            {
+                                const B3DPoint aPreviousPoint(aCurrentPoint);
+                                aCurrentPoint = rCandidate.getB3DPoint(a);
+
+                                // cross-over in Y?
+                                const bool bCompYA(fTools::more(aPreviousPoint.getY(), rPoint.getY()));
+                                const bool bCompYB(fTools::more(aCurrentPoint.getY(), rPoint.getY()));
+
+                                if(bCompYA != bCompYB)
+                                {
+                                    // cross-over in X?
+                                    const bool bCompXA(fTools::more(aPreviousPoint.getX(), rPoint.getX()));
+                                    const bool bCompXB(fTools::more(aCurrentPoint.getX(), rPoint.getX()));
+
+                                    if(bCompXA == bCompXB)
+                                    {
+                                        if(bCompXA)
+                                        {
+                                            bRetval = !bRetval;
+                                        }
+                                    }
+                                    else
+                                    {
+                                        const double fCompare(
+                                            aCurrentPoint.getX() - (aCurrentPoint.getY() - rPoint.getY()) *
+                                            (aPreviousPoint.getX() - aCurrentPoint.getX()) /
+                                            (aPreviousPoint.getY() - aCurrentPoint.getY()));
+
+                                        if(fTools::more(fCompare, rPoint.getX()))
+                                        {
+                                            bRetval = !bRetval;
+                                        }
+                                    }
+                                }
+                            }
+                        }
+                    }
+                }
+
+                return bRetval;
+            }
+        }
+
+        bool isPointOnLine(const B3DPoint& rStart, const B3DPoint& rEnd, const B3DPoint& rCandidate, bool bWithPoints)
+        {
+            if(rCandidate.equal(rStart) || rCandidate.equal(rEnd))
+            {
+                // candidate is in epsilon around start or end -> inside
+                return bWithPoints;
+            }
+            else if(rStart.equal(rEnd))
+            {
+                // start and end are equal, but candidate is outside their epsilon -> outside
+                return false;
+            }
+            else
+            {
+                const B3DVector aEdgeVector(rEnd - rStart);
+                const B3DVector aTestVector(rCandidate - rStart);
+
+                if(areParallel(aEdgeVector, aTestVector))
+                {
+                    double fParamTestOnCurr(0.0);
+
+                    if(aEdgeVector.getX() > aEdgeVector.getY())
+                    {
+                        if(aEdgeVector.getX() > aEdgeVector.getZ())
+                        {
+                            // X is biggest
+                            fParamTestOnCurr = aTestVector.getX() / aEdgeVector.getX();
+                        }
+                        else
+                        {
+                            // Z is biggest
+                            fParamTestOnCurr = aTestVector.getZ() / aEdgeVector.getZ();
+                        }
+                    }
+                    else
+                    {
+                        if(aEdgeVector.getY() > aEdgeVector.getZ())
+                        {
+                            // Y is biggest
+                            fParamTestOnCurr = aTestVector.getY() / aEdgeVector.getY();
+                        }
+                        else
+                        {
+                            // Z is biggest
+                            fParamTestOnCurr = aTestVector.getZ() / aEdgeVector.getZ();
+                        }
+                    }
+
+                    if(fTools::more(fParamTestOnCurr, 0.0) && fTools::less(fParamTestOnCurr, 1.0))
+                    {
+                        return true;
+                    }
+                }
+
+                return false;
+            }
+        }
+
+        bool isPointOnPolygon(const B3DPolygon& rCandidate, const B3DPoint& rPoint)
+        {
+            const sal_uInt32 nPointCount(rCandidate.count());
+
+            if(nPointCount > 1)
+            {
+                const sal_uInt32 nLoopCount(rCandidate.isClosed() ? nPointCount : nPointCount - 1);
+                B3DPoint aCurrentPoint(rCandidate.getB3DPoint(0));
+
+                for(sal_uInt32 a(0); a < nLoopCount; a++)
+                {
+                    const B3DPoint aNextPoint(rCandidate.getB3DPoint((a + 1) % nPointCount));
+
+                    if(isPointOnLine(aCurrentPoint, aNextPoint, rPoint, true/*bWithPoints*/))
+                    {
+                        return true;
+                    }
+
+                    aCurrentPoint = aNextPoint;
+                }
+            }
+            else if(nPointCount)
+            {
+                return rPoint.equal(rCandidate.getB3DPoint(0));
+            }
+
+            return false;
+        }
+
+        bool getCutBetweenLineAndPlane(const B3DVector& rPlaneNormal, const B3DPoint& rPlanePoint, const B3DPoint& rEdgeStart, const B3DPoint& rEdgeEnd, double& fCut)
+        {
+            if(!rPlaneNormal.equalZero() && !rEdgeStart.equal(rEdgeEnd))
+            {
+                const B3DVector aTestEdge(rEdgeEnd - rEdgeStart);
+                const double fScalarEdge(rPlaneNormal.scalar(aTestEdge));
+
+                if(!fTools::equalZero(fScalarEdge))
+                {
+                    const B3DVector aCompareEdge(rPlanePoint - rEdgeStart);
+                    const double fScalarCompare(rPlaneNormal.scalar(aCompareEdge));
+
+                    fCut = fScalarCompare / fScalarEdge;
+                    return true;
+                }
+            }
+
+            return false;
+        }
+
+        // snap points of horizontal or vertical edges to discrete values
+        B3DPolygon snapPointsOfHorizontalOrVerticalEdges(const B3DPolygon& rCandidate)
+        {
+            const sal_uInt32 nPointCount(rCandidate.count());
+
+            if(nPointCount > 1)
+            {
+                // Start by copying the source polygon to get a writeable copy. The closed state is
+                // copied by aRetval's initialisation, too, so no need to copy it in this method
+                B3DPolygon aRetval(rCandidate);
+
+                // prepare geometry data. Get rounded from original
+                B3ITuple aPrevTuple(basegfx::fround(rCandidate.getB3DPoint(nPointCount - 1)));
+                B3DPoint aCurrPoint(rCandidate.getB3DPoint(0));
+                B3ITuple aCurrTuple(basegfx::fround(aCurrPoint));
+
+                // loop over all points. This will also snap the implicit closing edge
+                // even when not closed, but that's no problem here
+                for(sal_uInt32 a(0); a < nPointCount; a++)
+                {
+                    // get next point. Get rounded from original
+                    const bool bLastRun(a + 1 == nPointCount);
+                    const sal_uInt32 nNextIndex(bLastRun ? 0 : a + 1);
+                    const B3DPoint aNextPoint(rCandidate.getB3DPoint(nNextIndex));
+                    const B3ITuple aNextTuple(basegfx::fround(aNextPoint));
+
+                    // get the states
+                    const bool bPrevVertical(aPrevTuple.getX() == aCurrTuple.getX());
+                    const bool bNextVertical(aNextTuple.getX() == aCurrTuple.getX());
+                    const bool bPrevHorizontal(aPrevTuple.getY() == aCurrTuple.getY());
+                    const bool bNextHorizontal(aNextTuple.getY() == aCurrTuple.getY());
+                    const bool bSnapX(bPrevVertical || bNextVertical);
+                    const bool bSnapY(bPrevHorizontal || bNextHorizontal);
+
+                    if(bSnapX || bSnapY)
+                    {
+                        const B3DPoint aSnappedPoint(
+                            bSnapX ? aCurrTuple.getX() : aCurrPoint.getX(),
+                            bSnapY ? aCurrTuple.getY() : aCurrPoint.getY(),
+                            aCurrPoint.getZ());
+
+                        aRetval.setB3DPoint(a, aSnappedPoint);
+                    }
+
+                    // prepare next point
+                    if(!bLastRun)
+                    {
+                        aPrevTuple = aCurrTuple;
+                        aCurrPoint = aNextPoint;
+                        aCurrTuple = aNextTuple;
+                    }
+                }
+
+                return aRetval;
+            }
+            else
+            {
+                return rCandidate;
+            }
+        }
+
+} // end of namespace
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */