Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1554 insertions, 0 deletions

diff --git a/cui/source/tabpages/page.cxx b/cui/source/tabpages/page.cxx
new file mode 100644
index 000000000..1b5fc2851
--- /dev/null
+++ b/cui/source/tabpages/page.cxx
@@ -0,0 +1,1554 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <memory>
+#include <sfx2/objsh.hxx>
+#include <sfx2/printer.hxx>
+#include <sfx2/viewsh.hxx>
+#include <svl/languageoptions.hxx>
+#include <svtools/unitconv.hxx>
+#include <vcl/svapp.hxx>
+#include <vcl/weld.hxx>
+#include <sfx2/htmlmode.hxx>
+#include <sal/macros.h>
+
+#include <svx/strings.hrc>
+#include <svx/dialmgr.hxx>
+#include <page.hxx>
+#include <svx/pageitem.hxx>
+#include <editeng/brushitem.hxx>
+#include <editeng/boxitem.hxx>
+#include <editeng/shaditem.hxx>
+#include <editeng/pbinitem.hxx>
+#include <editeng/lrspitem.hxx>
+#include <editeng/ulspitem.hxx>
+#include <editeng/sizeitem.hxx>
+#include <editeng/frmdiritem.hxx>
+#include <svx/dlgutil.hxx>
+#include <editeng/paperinf.hxx>
+#include <svl/stritem.hxx>
+#include <editeng/eerdll.hxx>
+#include <editeng/editrids.hrc>
+#include <svx/svxids.hrc>
+#include <svtools/optionsdrawinglayer.hxx>
+#include <svl/slstitm.hxx>
+#include <svx/xdef.hxx>
+#include <svx/unobrushitemhelper.hxx>
+#include <svx/SvxNumOptionsTabPageHelper.hxx>
+
+// static ----------------------------------------------------------------
+
+// #i19922# - tdf#126051 see svx/source/dialog/hdft.cxx and sw/source/uibase/sidebar/PageMarginControl.hxx
+static const long MINBODY = 56;  // 1mm in twips rounded
+
+const sal_uInt16 SvxPageDescPage::pRanges[] =
+{
+    SID_ATTR_BORDER_OUTER,
+    SID_ATTR_BORDER_SHADOW,
+    SID_ATTR_LRSPACE,
+    SID_ATTR_PAGE_SHARED,
+    SID_SWREGISTER_COLLECTION,
+    SID_SWREGISTER_MODE,
+    0
+};
+// ------- Mapping page layout ------------------------------------------
+
+const SvxPageUsage aArr[] =
+{
+    SvxPageUsage::All,
+    SvxPageUsage::Mirror,
+    SvxPageUsage::Right,
+    SvxPageUsage::Left
+};
+
+
+static sal_uInt16 PageUsageToPos_Impl( SvxPageUsage nUsage )
+{
+    for ( size_t i = 0; i < SAL_N_ELEMENTS(aArr); ++i )
+        if ( aArr[i] ==  nUsage )
+            return i;
+    return 3;
+}
+
+
+static SvxPageUsage PosToPageUsage_Impl( sal_uInt16 nPos )
+{
+    if ( nPos >= SAL_N_ELEMENTS(aArr) )
+        return SvxPageUsage::NONE;
+    return aArr[nPos];
+}
+
+
+static Size GetMinBorderSpace_Impl( const SvxShadowItem& rShadow, const SvxBoxItem& rBox )
+{
+    Size aSz;
+    aSz.setHeight( rShadow.CalcShadowSpace( SvxShadowItemSide::BOTTOM ) + rBox.CalcLineSpace( SvxBoxItemLine::BOTTOM ) );
+    aSz.AdjustHeight(rShadow.CalcShadowSpace( SvxShadowItemSide::TOP ) + rBox.CalcLineSpace( SvxBoxItemLine::TOP ) );
+    aSz.setWidth( rShadow.CalcShadowSpace( SvxShadowItemSide::LEFT ) + rBox.CalcLineSpace( SvxBoxItemLine::LEFT ) );
+    aSz.AdjustWidth(rShadow.CalcShadowSpace( SvxShadowItemSide::RIGHT ) + rBox.CalcLineSpace( SvxBoxItemLine::RIGHT ) );
+    return aSz;
+}
+
+
+static long ConvertLong_Impl( const long nIn, MapUnit eUnit )
+{
+    return OutputDevice::LogicToLogic( nIn, eUnit, MapUnit::MapTwip );
+}
+
+static bool IsEqualSize_Impl( const SvxSizeItem* pSize, const Size& rSize )
+{
+    if ( pSize )
+    {
+        Size aSize = pSize->GetSize();
+        long nDiffW = std::abs( rSize.Width () - aSize.Width () );
+        long nDiffH = std::abs( rSize.Height() - aSize.Height() );
+        return ( nDiffW < 10 && nDiffH < 10 );
+    }
+    else
+        return false;
+}
+
+
+#define MARGIN_LEFT     ( MarginPosition(0x0001) )
+#define MARGIN_RIGHT    ( MarginPosition(0x0002) )
+#define MARGIN_TOP      ( MarginPosition(0x0004) )
+#define MARGIN_BOTTOM   ( MarginPosition(0x0008) )
+
+// class SvxPageDescPage --------------------------------------------------
+
+std::unique_ptr<SfxTabPage> SvxPageDescPage::Create( weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rSet )
+{
+    return std::make_unique<SvxPageDescPage>(pPage, pController, *rSet);
+}
+
+SvxPageDescPage::SvxPageDescPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rAttr)
+    : SfxTabPage(pPage, pController, "cui/ui/pageformatpage.ui", "PageFormatPage", &rAttr)
+    , bLandscape(false)
+    , eMode(SVX_PAGE_MODE_STANDARD)
+    , ePaperStart(PAPER_A3)
+    , m_nPos(0)
+    , mpDefPrinter(nullptr)
+    , mbDelPrinter(false)
+    , mbEnableDrawingLayerFillStyles(false)
+    , m_xPaperSizeBox(new SvxPaperSizeListBox(m_xBuilder->weld_combo_box("comboPageFormat")))
+    , m_xPaperWidthEdit(m_xBuilder->weld_metric_spin_button("spinWidth", FieldUnit::CM))
+    , m_xPaperHeightEdit(m_xBuilder->weld_metric_spin_button("spinHeight", FieldUnit::CM))
+    , m_xOrientationFT(m_xBuilder->weld_label("labelOrientation"))
+    , m_xPortraitBtn(m_xBuilder->weld_radio_button("radiobuttonPortrait"))
+    , m_xLandscapeBtn(m_xBuilder->weld_radio_button("radiobuttonLandscape"))
+    , m_xTextFlowLbl(m_xBuilder->weld_label("labelTextFlow"))
+    , m_xTextFlowBox(new svx::FrameDirectionListBox(m_xBuilder->weld_combo_box("comboTextFlowBox")))
+    , m_xPaperTrayBox(m_xBuilder->weld_combo_box("comboPaperTray"))
+    , m_xLeftMarginLbl(m_xBuilder->weld_label("labelLeftMargin"))
+    , m_xLeftMarginEdit(m_xBuilder->weld_metric_spin_button("spinMargLeft", FieldUnit::CM))
+    , m_xRightMarginLbl(m_xBuilder->weld_label("labelRightMargin"))
+    , m_xRightMarginEdit(m_xBuilder->weld_metric_spin_button("spinMargRight", FieldUnit::CM))
+    , m_xTopMarginEdit(m_xBuilder->weld_metric_spin_button("spinMargTop", FieldUnit::CM))
+    , m_xBottomMarginEdit(m_xBuilder->weld_metric_spin_button("spinMargBot", FieldUnit::CM))
+    , m_xPageText(m_xBuilder->weld_label("labelPageLayout"))
+    , m_xLayoutBox(m_xBuilder->weld_combo_box("comboPageLayout"))
+    , m_xNumberFormatText(m_xBuilder->weld_label("labelPageNumbers"))
+    , m_xNumberFormatBox(new SvxPageNumberListBox(m_xBuilder->weld_combo_box("comboLayoutFormat")))
+    , m_xTblAlignFT(m_xBuilder->weld_label("labelTblAlign"))
+    , m_xHorzBox(m_xBuilder->weld_check_button("checkbuttonHorz"))
+    , m_xVertBox(m_xBuilder->weld_check_button("checkbuttonVert"))
+    , m_xAdaptBox(m_xBuilder->weld_check_button("checkAdaptBox"))
+    , m_xRegisterCB(m_xBuilder->weld_check_button("checkRegisterTrue"))
+    , m_xRegisterFT(m_xBuilder->weld_label("labelRegisterStyle"))
+    , m_xRegisterLB(m_xBuilder->weld_combo_box("comboRegisterStyle"))
+    // Strings stored in UI
+    , m_xInsideLbl(m_xBuilder->weld_label("labelInner"))
+    , m_xOutsideLbl(m_xBuilder->weld_label("labelOuter"))
+    , m_xPrintRangeQueryText(m_xBuilder->weld_label("labelMsg"))
+    , m_xBspWin(new weld::CustomWeld(*m_xBuilder, "drawingareaPageDirection", m_aBspWin))
+{
+    m_xRegisterLB->set_size_request(m_xRegisterLB->get_approximate_digit_width() * 20, -1);
+
+    bBorderModified = false;
+    m_aBspWin.EnableRTL(false);
+
+    // this page needs ExchangeSupport
+    SetExchangeSupport();
+
+    SvtLanguageOptions aLangOptions;
+    bool bCJK = aLangOptions.IsAsianTypographyEnabled();
+    bool bCTL = aLangOptions.IsCTLFontEnabled();
+    bool bWeb = false;
+    const SfxPoolItem* pItem;
+
+    SfxObjectShell* pShell;
+    if(SfxItemState::SET == rAttr.GetItemState(SID_HTML_MODE, false, &pItem) ||
+        ( nullptr != (pShell = SfxObjectShell::Current()) &&
+                    nullptr != (pItem = pShell->GetItem(SID_HTML_MODE))))
+        bWeb = 0 != (static_cast<const SfxUInt16Item*>(pItem)->GetValue() & HTMLMODE_ON);
+
+    //  fill text flow listbox with valid entries
+
+    m_xTextFlowBox->append(SvxFrameDirection::Horizontal_LR_TB, SvxResId(RID_SVXSTR_PAGEDIR_LTR_HORI));
+
+    if (bCTL)
+        m_xTextFlowBox->append(SvxFrameDirection::Horizontal_RL_TB, SvxResId(RID_SVXSTR_PAGEDIR_RTL_HORI));
+
+
+    // #109989# do not show vertical directions in Writer/Web
+    if( !bWeb && bCJK )
+    {
+        m_xTextFlowBox->append(SvxFrameDirection::Vertical_RL_TB, SvxResId(RID_SVXSTR_PAGEDIR_RTL_VERT));
+        m_xTextFlowBox->append(SvxFrameDirection::Vertical_LR_TB, SvxResId(RID_SVXSTR_PAGEDIR_LTR_VERT));
+    }
+
+    // #109989# show the text direction box in Writer/Web too
+    if( (bCJK || bCTL) &&
+        SfxItemState::UNKNOWN < rAttr.GetItemState(GetWhich( SID_ATTR_FRAMEDIRECTION )))
+    {
+        m_xTextFlowLbl->show();
+        m_xTextFlowBox->show();
+        m_xTextFlowBox->connect_changed(LINK(this, SvxPageDescPage, FrameDirectionModify_Impl));
+
+        m_aBspWin.EnableFrameDirection(true);
+    }
+    Init_Impl();
+
+    FieldUnit eFUnit = GetModuleFieldUnit( rAttr );
+    SetFieldUnit( *m_xLeftMarginEdit, eFUnit );
+    SetFieldUnit( *m_xRightMarginEdit, eFUnit );
+    SetFieldUnit( *m_xTopMarginEdit, eFUnit );
+    SetFieldUnit( *m_xBottomMarginEdit, eFUnit );
+    SetFieldUnit( *m_xPaperWidthEdit, eFUnit );
+    SetFieldUnit( *m_xPaperHeightEdit, eFUnit );
+
+    if ( SfxViewShell::Current() && SfxViewShell::Current()->GetPrinter() )
+    {
+        mpDefPrinter = SfxViewShell::Current()->GetPrinter();
+    }
+    else
+    {
+        mpDefPrinter = VclPtr<Printer>::Create();
+        mbDelPrinter = true;
+    }
+
+    MapMode aOldMode = mpDefPrinter->GetMapMode();
+    mpDefPrinter->SetMapMode(MapMode(MapUnit::MapTwip));
+
+    // set first- and last-values for the margins
+    Size aPaperSize = mpDefPrinter->GetPaperSize();
+    Size aPrintSize = mpDefPrinter->GetOutputSize();
+
+    /*
+     * To convert a point ( 0,0 ) into logic coordinates
+     * looks like nonsense; but it makes sense when the
+     * coordinate system's origin has been moved.
+     */
+    Point aPrintOffset = mpDefPrinter->GetPageOffset() - mpDefPrinter->PixelToLogic( Point() );
+    mpDefPrinter->SetMapMode( aOldMode );
+
+    nFirstLeftMargin = m_xLeftMarginEdit->convert_value_from(m_xLeftMarginEdit->normalize(aPrintOffset.X()), FieldUnit::TWIP);
+    nFirstRightMargin = m_xRightMarginEdit->convert_value_from(m_xRightMarginEdit->normalize(aPaperSize.Width() - aPrintSize.Width() - aPrintOffset.X()), FieldUnit::TWIP);
+    nFirstTopMargin = m_xTopMarginEdit->convert_value_from(m_xTopMarginEdit->normalize(aPrintOffset.Y() ), FieldUnit::TWIP);
+    nFirstBottomMargin = m_xBottomMarginEdit->convert_value_from(m_xBottomMarginEdit->normalize(aPaperSize.Height() - aPrintSize.Height() - aPrintOffset.Y()), FieldUnit::TWIP );
+    nLastLeftMargin = m_xLeftMarginEdit->convert_value_from(m_xLeftMarginEdit->normalize(aPrintOffset.X() + aPrintSize.Width()), FieldUnit::TWIP);
+    nLastRightMargin = m_xRightMarginEdit->convert_value_from(m_xRightMarginEdit->normalize(aPrintOffset.X() + aPrintSize.Width()), FieldUnit::TWIP);
+    nLastTopMargin = m_xTopMarginEdit->convert_value_from(m_xTopMarginEdit->normalize(aPrintOffset.Y() + aPrintSize.Height()), FieldUnit::TWIP);
+    nLastBottomMargin = m_xBottomMarginEdit->convert_value_from(m_xBottomMarginEdit->normalize(aPrintOffset.Y() + aPrintSize.Height()), FieldUnit::TWIP);
+
+    // #i4219# get DrawingLayer options
+    const SvtOptionsDrawinglayer aDrawinglayerOpt;
+
+    // #i4219# take Maximum now from configuration (1/100th cm)
+    // was: 11900 -> 119 cm ;new value 3 meters -> 300 cm -> 30000
+    m_xPaperWidthEdit->set_max(m_xPaperWidthEdit->normalize(aDrawinglayerOpt.GetMaximumPaperWidth()), FieldUnit::CM);
+    m_xPaperHeightEdit->set_max(m_xPaperHeightEdit->normalize(aDrawinglayerOpt.GetMaximumPaperHeight()), FieldUnit::CM);
+
+    // #i4219# also for margins (1/100th cm). Was: 9999, keeping.
+    m_xLeftMarginEdit->set_max(m_xLeftMarginEdit->normalize(aDrawinglayerOpt.GetMaximumPaperLeftMargin()), FieldUnit::MM);
+    m_xRightMarginEdit->set_max(m_xRightMarginEdit->normalize(aDrawinglayerOpt.GetMaximumPaperRightMargin()), FieldUnit::MM);
+    m_xTopMarginEdit->set_max(m_xTopMarginEdit->normalize(aDrawinglayerOpt.GetMaximumPaperTopMargin()), FieldUnit::MM);
+    m_xBottomMarginEdit->set_max(m_xBottomMarginEdit->normalize(aDrawinglayerOpt.GetMaximumPaperBottomMargin()), FieldUnit::MM);
+
+    // Get the i18n framework numberings and add them to the listbox.
+    SvxNumOptionsTabPageHelper::GetI18nNumbering(m_xNumberFormatBox->get_widget(), std::numeric_limits<sal_uInt16>::max());
+}
+
+SvxPageDescPage::~SvxPageDescPage()
+{
+    if(mbDelPrinter)
+    {
+        mpDefPrinter.disposeAndClear();
+        mbDelPrinter = false;
+    }
+}
+
+void SvxPageDescPage::Init_Impl()
+{
+    // adjust the handler
+    m_xLayoutBox->connect_changed(LINK(this, SvxPageDescPage, LayoutHdl_Impl));
+
+    m_xPaperSizeBox->connect_changed(LINK(this, SvxPageDescPage, PaperSizeSelect_Impl));
+    m_xPaperWidthEdit->connect_value_changed( LINK(this, SvxPageDescPage, PaperSizeModify_Impl));
+    m_xPaperHeightEdit->connect_value_changed(LINK(this, SvxPageDescPage, PaperSizeModify_Impl));
+    m_xLandscapeBtn->connect_clicked(LINK(this, SvxPageDescPage, SwapOrientation_Impl));
+    m_xPortraitBtn->connect_clicked(LINK(this, SvxPageDescPage, SwapOrientation_Impl));
+
+    Link<weld::MetricSpinButton&, void> aLink = LINK(this, SvxPageDescPage, BorderModify_Impl);
+    m_xLeftMarginEdit->connect_value_changed(aLink);
+    m_xRightMarginEdit->connect_value_changed(aLink);
+    m_xTopMarginEdit->connect_value_changed(aLink);
+    m_xBottomMarginEdit->connect_value_changed(aLink);
+
+    m_xHorzBox->connect_toggled(LINK(this, SvxPageDescPage, CenterHdl_Impl));
+    m_xVertBox->connect_toggled(LINK(this, SvxPageDescPage, CenterHdl_Impl));
+}
+
+void SvxPageDescPage::Reset( const SfxItemSet* rSet )
+{
+    SfxItemPool* pPool = rSet->GetPool();
+    DBG_ASSERT( pPool, "Where is the pool?" );
+    MapUnit eUnit = pPool->GetMetric( GetWhich( SID_ATTR_LRSPACE ) );
+
+    // adjust margins (right/left)
+    const SfxPoolItem* pItem = GetItem( *rSet, SID_ATTR_LRSPACE );
+
+    if ( pItem )
+    {
+        const SvxLRSpaceItem& rLRSpace = static_cast<const SvxLRSpaceItem&>(*pItem);
+        SetMetricValue( *m_xLeftMarginEdit, rLRSpace.GetLeft(), eUnit );
+        m_aBspWin.SetLeft(
+            static_cast<sal_uInt16>(ConvertLong_Impl( rLRSpace.GetLeft(), eUnit )) );
+        SetMetricValue( *m_xRightMarginEdit, rLRSpace.GetRight(), eUnit );
+        m_aBspWin.SetRight(
+            static_cast<sal_uInt16>(ConvertLong_Impl( rLRSpace.GetRight(), eUnit )) );
+    }
+
+    // adjust margins (top/bottom)
+    pItem = GetItem( *rSet, SID_ATTR_ULSPACE );
+
+    if ( pItem )
+    {
+        const SvxULSpaceItem& rULSpace = static_cast<const SvxULSpaceItem&>(*pItem);
+        SetMetricValue( *m_xTopMarginEdit, rULSpace.GetUpper(), eUnit );
+        m_aBspWin.SetTop(
+            static_cast<sal_uInt16>(ConvertLong_Impl( static_cast<long>(rULSpace.GetUpper()), eUnit )) );
+        SetMetricValue( *m_xBottomMarginEdit, rULSpace.GetLower(), eUnit );
+        m_aBspWin.SetBottom(
+            static_cast<sal_uInt16>(ConvertLong_Impl( static_cast<long>(rULSpace.GetLower()), eUnit )) );
+    }
+
+    // general page data
+    SvxNumType eNumType = SVX_NUM_ARABIC;
+    bLandscape = ( mpDefPrinter->GetOrientation() == Orientation::Landscape );
+    SvxPageUsage nUse = SvxPageUsage::All;
+    pItem = GetItem( *rSet, SID_ATTR_PAGE );
+
+    if ( pItem )
+    {
+        const SvxPageItem& rItem = static_cast<const SvxPageItem&>(*pItem);
+        eNumType = rItem.GetNumType();
+        nUse = rItem.GetPageUsage();
+        bLandscape = rItem.IsLandscape();
+    }
+
+    // alignment
+    m_xLayoutBox->set_active(::PageUsageToPos_Impl(nUse));
+    m_aBspWin.SetUsage( nUse );
+    LayoutHdl_Impl( *m_xLayoutBox );
+
+    //adjust numeration type of the page style
+    m_xNumberFormatBox->set_active_id(eNumType);
+
+    m_xPaperTrayBox->clear();
+    sal_uInt8 nPaperBin = PAPERBIN_PRINTER_SETTINGS;
+    pItem = GetItem( *rSet, SID_ATTR_PAGE_PAPERBIN );
+
+    if ( pItem )
+    {
+        nPaperBin = static_cast<const SvxPaperBinItem*>(pItem)->GetValue();
+
+        if ( nPaperBin >= mpDefPrinter->GetPaperBinCount() )
+            nPaperBin = PAPERBIN_PRINTER_SETTINGS;
+    }
+
+    OUString aBinName;
+
+    if ( PAPERBIN_PRINTER_SETTINGS  == nPaperBin )
+        aBinName = EditResId(RID_SVXSTR_PAPERBIN_SETTINGS);
+    else
+        aBinName = mpDefPrinter->GetPaperBinName( static_cast<sal_uInt16>(nPaperBin) );
+
+    m_xPaperTrayBox->append(OUString::number(nPaperBin), aBinName);
+    m_xPaperTrayBox->set_active_text(aBinName);
+    // reset focus handler to default first so know none already connected
+    m_xPaperTrayBox->connect_focus_in(Link<weld::Widget&, void>());
+    // update the list when widget gets focus
+    m_xPaperTrayBox->connect_focus_in(LINK(this, SvxPageDescPage, PaperBinHdl_Impl));
+
+    Size aPaperSize = SvxPaperInfo::GetPaperSize( mpDefPrinter );
+    pItem = GetItem( *rSet, SID_ATTR_PAGE_SIZE );
+
+    if ( pItem )
+        aPaperSize = static_cast<const SvxSizeItem*>(pItem)->GetSize();
+
+    bool bOrientationSupport =
+        mpDefPrinter->HasSupport( PrinterSupport::SetOrientation );
+
+    if ( !bOrientationSupport &&
+         aPaperSize.Width() > aPaperSize.Height() )
+        bLandscape = true;
+
+    // tdf#130548 disable callbacks on the other of a pair of the radiogroup
+    // when toggling its partner
+    m_xLandscapeBtn->connect_clicked(Link<weld::Button&, void>());
+    m_xPortraitBtn->connect_clicked(Link<weld::Button&, void>());
+
+    m_xLandscapeBtn->set_active(bLandscape);
+    m_xPortraitBtn->set_active(!bLandscape);
+
+    m_xLandscapeBtn->connect_clicked(LINK(this, SvxPageDescPage, SwapOrientation_Impl));
+    m_xPortraitBtn->connect_clicked(LINK(this, SvxPageDescPage, SwapOrientation_Impl));
+
+    m_aBspWin.SetSize( Size( ConvertLong_Impl( aPaperSize.Width(), eUnit ),
+                           ConvertLong_Impl( aPaperSize.Height(), eUnit ) ) );
+
+    aPaperSize = OutputDevice::LogicToLogic(aPaperSize, MapMode(eUnit), MapMode(MapUnit::Map100thMM));
+    if ( bLandscape )
+        Swap( aPaperSize );
+
+    // Actual Paper Format
+    Paper ePaper = SvxPaperInfo::GetSvxPaper( aPaperSize, MapUnit::Map100thMM );
+
+    if ( PAPER_USER != ePaper )
+        aPaperSize = SvxPaperInfo::GetPaperSize( ePaper, MapUnit::Map100thMM );
+
+    if ( bLandscape )
+        Swap( aPaperSize );
+
+    // write values into the edits
+    SetMetricValue( *m_xPaperHeightEdit, aPaperSize.Height(), MapUnit::Map100thMM );
+    SetMetricValue( *m_xPaperWidthEdit, aPaperSize.Width(), MapUnit::Map100thMM );
+    m_xPaperSizeBox->clear();
+
+    m_xPaperSizeBox->FillPaperSizeEntries( ( ePaperStart == PAPER_A3 ) ? PaperSizeApp::Std : PaperSizeApp::Draw );
+    m_xPaperSizeBox->set_active_id( ePaper );
+
+    // application specific
+
+    switch ( eMode )
+    {
+        case SVX_PAGE_MODE_CENTER:
+        {
+            m_xTblAlignFT->show();
+            m_xHorzBox->show();
+            m_xVertBox->show();
+            DisableVerticalPageDir();
+
+            // horizontal alignment
+            pItem = GetItem( *rSet, SID_ATTR_PAGE_EXT1 );
+            m_xHorzBox->set_active(pItem && static_cast<const SfxBoolItem*>(pItem)->GetValue());
+
+            // vertical alignment
+            pItem = GetItem( *rSet, SID_ATTR_PAGE_EXT2 );
+            m_xVertBox->set_active(pItem && static_cast<const SfxBoolItem*>(pItem)->GetValue());
+
+            // set example window on the table
+            m_aBspWin.SetTable( true );
+            m_aBspWin.SetHorz(m_xHorzBox->get_active());
+            m_aBspWin.SetVert(m_xVertBox->get_active());
+
+            break;
+        }
+
+        case SVX_PAGE_MODE_PRESENTATION:
+        {
+            DisableVerticalPageDir();
+            m_xAdaptBox->show();
+            pItem = GetItem( *rSet, SID_ATTR_PAGE_EXT1 );
+            m_xAdaptBox->set_active( pItem &&
+                static_cast<const SfxBoolItem*>(pItem)->GetValue() );
+
+            //!!! hidden, because not implemented by StarDraw
+            m_xLayoutBox->hide();
+            m_xPageText->hide();
+
+            break;
+        }
+        default: ;//prevent warning
+    }
+
+
+    // display background and border in the example
+    ResetBackground_Impl( *rSet );
+//! UpdateExample_Impl();
+    RangeHdl_Impl();
+
+    InitHeadFoot_Impl( *rSet );
+
+    bBorderModified = false;
+    SwapFirstValues_Impl( false );
+    UpdateExample_Impl();
+
+    m_xLeftMarginEdit->save_value();
+    m_xRightMarginEdit->save_value();
+    m_xTopMarginEdit->save_value();
+    m_xBottomMarginEdit->save_value();
+    m_xLayoutBox->save_value();
+    m_xNumberFormatBox->save_value();
+    m_xPaperSizeBox->save_value();
+    m_xPaperWidthEdit->save_value();
+    m_xPaperHeightEdit->save_value();
+    m_xPortraitBtn->save_state();
+    m_xLandscapeBtn->save_state();
+    m_xPaperTrayBox->save_value();
+    m_xVertBox->save_state();
+    m_xHorzBox->save_state();
+    m_xAdaptBox->save_state();
+
+    CheckMarginEdits( true );
+
+
+    if(SfxItemState::SET == rSet->GetItemState(SID_SWREGISTER_MODE))
+    {
+        m_xRegisterCB->set_active(static_cast<const SfxBoolItem&>(rSet->Get(
+                                  SID_SWREGISTER_MODE)).GetValue());
+        m_xRegisterCB->save_state();
+        RegisterModify(*m_xRegisterCB);
+    }
+    if(SfxItemState::SET == rSet->GetItemState(SID_SWREGISTER_COLLECTION))
+    {
+        m_xRegisterLB->set_active_text(
+                static_cast<const SfxStringItem&>(rSet->Get(SID_SWREGISTER_COLLECTION)).GetValue());
+        m_xRegisterLB->save_value();
+    }
+
+    SfxItemState eState = rSet->GetItemState( GetWhich( SID_ATTR_FRAMEDIRECTION ),
+                                                true, &pItem );
+    if( SfxItemState::UNKNOWN != eState )
+    {
+        SvxFrameDirection nVal  = SfxItemState::SET == eState
+                                ? static_cast<const SvxFrameDirectionItem*>(pItem)->GetValue()
+                                : SvxFrameDirection::Horizontal_LR_TB;
+        m_xTextFlowBox->set_active_id(nVal);
+
+        m_xTextFlowBox->save_value();
+        m_aBspWin.SetFrameDirection(nVal);
+    }
+}
+
+void SvxPageDescPage::FillUserData()
+{
+    if (SVX_PAGE_MODE_PRESENTATION == eMode)
+        SetUserData(m_xAdaptBox->get_active() ? OUString("1") : OUString("0")) ;
+
+}
+
+bool SvxPageDescPage::FillItemSet( SfxItemSet* rSet )
+{
+    bool bModified = false;
+    const SfxItemSet& rOldSet = GetItemSet();
+    SfxItemPool* pPool = rOldSet.GetPool();
+    DBG_ASSERT( pPool, "Where is the pool?" );
+    sal_uInt16 nWhich = GetWhich( SID_ATTR_LRSPACE );
+    MapUnit eUnit = pPool->GetMetric( nWhich );
+    const SfxPoolItem* pOld = nullptr;
+
+    // copy old left and right margins
+    SvxLRSpaceItem aMargin( static_cast<const SvxLRSpaceItem&>(rOldSet.Get( nWhich )) );
+
+    // copy old top and bottom margins
+    nWhich = GetWhich( SID_ATTR_ULSPACE );
+    SvxULSpaceItem aTopMargin( static_cast<const SvxULSpaceItem&>(rOldSet.Get( nWhich )) );
+
+    if (m_xLeftMarginEdit->get_value_changed_from_saved())
+    {
+        aMargin.SetLeft( static_cast<sal_uInt16>(GetCoreValue( *m_xLeftMarginEdit, eUnit )) );
+        bModified = true;
+    }
+
+    if (m_xRightMarginEdit->get_value_changed_from_saved())
+    {
+        aMargin.SetRight( static_cast<sal_uInt16>(GetCoreValue( *m_xRightMarginEdit, eUnit )) );
+        bModified = true;
+    }
+
+    // set left and right margins
+    if (bModified)
+    {
+        pOld = GetOldItem( *rSet, SID_ATTR_LRSPACE );
+
+        if ( !pOld || *static_cast<const SvxLRSpaceItem*>(pOld) != aMargin )
+            rSet->Put( aMargin );
+        else
+            bModified = false;
+    }
+
+    bool bMod = false;
+
+    if (m_xTopMarginEdit->get_value_changed_from_saved())
+    {
+        aTopMargin.SetUpper( static_cast<sal_uInt16>(GetCoreValue( *m_xTopMarginEdit, eUnit )) );
+        bMod = true;
+    }
+
+    if (m_xBottomMarginEdit->get_value_changed_from_saved())
+    {
+        aTopMargin.SetLower( static_cast<sal_uInt16>(GetCoreValue( *m_xBottomMarginEdit, eUnit )) );
+        bMod = true;
+    }
+
+    // set top and bottom margins
+
+    if ( bMod )
+    {
+        pOld = GetOldItem( *rSet, SID_ATTR_ULSPACE );
+
+        if ( !pOld || *static_cast<const SvxULSpaceItem*>(pOld) != aTopMargin )
+        {
+            bModified = true;
+            rSet->Put( aTopMargin );
+        }
+    }
+
+    // paper tray
+    nWhich = GetWhich( SID_ATTR_PAGE_PAPERBIN );
+    sal_Int32 nPos = m_xPaperTrayBox->get_active();
+    sal_uInt16 nBin = m_xPaperTrayBox->get_id(nPos).toInt32();
+    pOld = GetOldItem( *rSet, SID_ATTR_PAGE_PAPERBIN );
+
+    if ( !pOld || static_cast<const SvxPaperBinItem*>(pOld)->GetValue() != nBin )
+    {
+        rSet->Put( SvxPaperBinItem( nWhich, static_cast<sal_uInt8>(nBin) ) );
+        bModified = true;
+    }
+
+    Paper ePaper = m_xPaperSizeBox->get_active_id();
+    bool bChecked = m_xLandscapeBtn->get_active();
+
+    if ( PAPER_USER == ePaper )
+    {
+        if ( m_xPaperSizeBox->get_value_changed_from_saved()    ||
+             m_xPaperWidthEdit->get_value_changed_from_saved()  ||
+             m_xPaperHeightEdit->get_value_changed_from_saved() ||
+             m_xLandscapeBtn->get_state_changed_from_saved() )
+        {
+            Size aSize( GetCoreValue( *m_xPaperWidthEdit, eUnit ),
+                        GetCoreValue( *m_xPaperHeightEdit, eUnit ) );
+            pOld = GetOldItem( *rSet, SID_ATTR_PAGE_SIZE );
+
+            if ( !pOld || static_cast<const SvxSizeItem*>(pOld)->GetSize() != aSize )
+            {
+                rSet->Put( SvxSizeItem( GetWhich(SID_ATTR_PAGE_SIZE), aSize ) );
+                bModified = true;
+            }
+        }
+    }
+    else
+    {
+        if (m_xPaperSizeBox->get_value_changed_from_saved() || m_xLandscapeBtn->get_state_changed_from_saved())
+        {
+            Size aSize( SvxPaperInfo::GetPaperSize( ePaper, eUnit ) );
+
+            if ( bChecked )
+                Swap( aSize );
+
+            pOld = GetOldItem( *rSet, SID_ATTR_PAGE_SIZE );
+
+            if ( !pOld || static_cast<const SvxSizeItem*>(pOld)->GetSize() != aSize )
+            {
+                rSet->Put( SvxSizeItem( GetWhich(SID_ATTR_PAGE_SIZE), aSize ) );
+                bModified = true;
+            }
+        }
+    }
+
+    nWhich = GetWhich( SID_ATTR_PAGE );
+    SvxPageItem aPage( static_cast<const SvxPageItem&>(rOldSet.Get( nWhich )) );
+    bMod = m_xLayoutBox->get_value_changed_from_saved();
+
+    if ( bMod )
+        aPage.SetPageUsage(::PosToPageUsage_Impl(m_xLayoutBox->get_active()));
+
+    if (m_xLandscapeBtn->get_state_changed_from_saved())
+    {
+        aPage.SetLandscape(bChecked);
+        bMod = true;
+    }
+
+    //Get the NumType value
+    if (m_xNumberFormatBox->get_value_changed_from_saved())
+    {
+        SvxNumType nEntryData = m_xNumberFormatBox->get_active_id();
+        aPage.SetNumType( nEntryData );
+        bMod = true;
+    }
+
+    if ( bMod )
+    {
+        pOld = GetOldItem( *rSet, SID_ATTR_PAGE );
+
+        if ( !pOld || *static_cast<const SvxPageItem*>(pOld) != aPage )
+        {
+            rSet->Put( aPage );
+            bModified = true;
+        }
+    }
+    else if ( SfxItemState::DEFAULT == rOldSet.GetItemState( nWhich ) )
+        rSet->ClearItem( nWhich );
+    else
+        rSet->Put( rOldSet.Get( nWhich ) );
+
+    // evaluate mode specific controls
+
+    switch ( eMode )
+    {
+        case SVX_PAGE_MODE_CENTER:
+        {
+            if (m_xHorzBox->get_state_changed_from_saved())
+            {
+                SfxBoolItem aHorz( GetWhich( SID_ATTR_PAGE_EXT1 ),
+                                   m_xHorzBox->get_active() );
+                rSet->Put( aHorz );
+                bModified = true;
+            }
+
+            if (m_xVertBox->get_state_changed_from_saved())
+            {
+                SfxBoolItem aVert( GetWhich( SID_ATTR_PAGE_EXT2 ),
+                                   m_xVertBox->get_active() );
+                rSet->Put( aVert );
+                bModified = true;
+            }
+            break;
+        }
+
+        case SVX_PAGE_MODE_PRESENTATION:
+        {
+            // always put so that draw can evaluate this
+            rSet->Put( SfxBoolItem( GetWhich( SID_ATTR_PAGE_EXT1 ),
+                      m_xAdaptBox->get_active() ) );
+            bModified = true;
+            break;
+        }
+        default: ;//prevent warning
+
+    }
+
+    if (m_xRegisterCB->get_visible() &&
+       (m_xRegisterCB->get_active() || m_xRegisterCB->get_state_changed_from_saved()))
+    {
+        const SfxBoolItem& rRegItem = static_cast<const SfxBoolItem&>(rOldSet.Get(SID_SWREGISTER_MODE));
+        std::unique_ptr<SfxBoolItem> pRegItem(rRegItem.Clone());
+        bool bCheck = m_xRegisterCB->get_active();
+        pRegItem->SetValue(bCheck);
+        rSet->Put(std::move(pRegItem));
+        bModified = true;
+        if(bCheck)
+        {
+            bModified = true;
+            rSet->Put(SfxStringItem(SID_SWREGISTER_COLLECTION,
+                            m_xRegisterLB->get_active_text()));
+        }
+    }
+
+    if (m_xTextFlowBox->get_visible() && m_xTextFlowBox->get_value_changed_from_saved())
+    {
+        SvxFrameDirection eDirection = m_xTextFlowBox->get_active_id();
+        rSet->Put( SvxFrameDirectionItem( eDirection, GetWhich( SID_ATTR_FRAMEDIRECTION ) ) );
+        bModified = true;
+    }
+
+    return bModified;
+}
+
+IMPL_LINK_NOARG(SvxPageDescPage, LayoutHdl_Impl, weld::ComboBox&, void)
+{
+    // switch inside outside
+    const SvxPageUsage nUsage = PosToPageUsage_Impl(m_xLayoutBox->get_active());
+
+    if (nUsage == SvxPageUsage::Mirror)
+    {
+        m_xLeftMarginLbl->hide();
+        m_xRightMarginLbl->hide();
+        m_xInsideLbl->show();
+        m_xOutsideLbl->show();
+    }
+    else
+    {
+        m_xLeftMarginLbl->show();
+        m_xRightMarginLbl->show();
+        m_xInsideLbl->hide();
+        m_xOutsideLbl->hide();
+    }
+    UpdateExample_Impl( true );
+}
+
+IMPL_LINK_NOARG(SvxPageDescPage, PaperBinHdl_Impl, weld::Widget&, void)
+{
+    // tdf#124226 disconnect so not called again, unless Reset occurs
+    m_xPaperTrayBox->connect_focus_in(Link<weld::Widget&, void>());
+
+    OUString aOldName = m_xPaperTrayBox->get_active_text();
+    m_xPaperTrayBox->freeze();
+    m_xPaperTrayBox->clear();
+    m_xPaperTrayBox->append(OUString::number(PAPERBIN_PRINTER_SETTINGS), EditResId(RID_SVXSTR_PAPERBIN_SETTINGS));
+    OUString aPaperBin(EditResId(RID_SVXSTR_PAPERBIN));
+    const sal_uInt16 nBinCount = mpDefPrinter->GetPaperBinCount();
+
+    for (sal_uInt16 i = 0; i < nBinCount; ++i)
+    {
+        OUString aName = mpDefPrinter->GetPaperBinName(i);
+        if (aName.isEmpty())
+        {
+            aName = aPaperBin + " " + OUString::number( i+1 );
+        }
+        m_xPaperTrayBox->append(OUString::number(i), aName);
+    }
+    m_xPaperTrayBox->set_active_text(aOldName);
+    m_xPaperTrayBox->thaw();
+
+    // tdf#123650 explicitly grab-focus after the modification otherwise gtk loses track
+    // of there the focus should be
+    m_xPaperTrayBox->grab_focus();
+}
+
+IMPL_LINK_NOARG(SvxPageDescPage, PaperSizeSelect_Impl, weld::ComboBox&, void)
+{
+    Paper ePaper = m_xPaperSizeBox->get_active_id();
+
+    if ( ePaper == PAPER_USER )
+        return;
+
+    Size aSize( SvxPaperInfo::GetPaperSize( ePaper, MapUnit::Map100thMM ) );
+
+    if (m_xLandscapeBtn->get_active())
+        Swap( aSize );
+
+    if ( aSize.Height() < m_xPaperHeightEdit->get_min( FieldUnit::MM_100TH ) )
+        m_xPaperHeightEdit->set_min(
+            m_xPaperHeightEdit->normalize( aSize.Height() ), FieldUnit::MM_100TH );
+    if ( aSize.Width() < m_xPaperWidthEdit->get_min( FieldUnit::MM_100TH ) )
+        m_xPaperWidthEdit->set_min(
+            m_xPaperWidthEdit->normalize( aSize.Width() ), FieldUnit::MM_100TH );
+    SetMetricValue( *m_xPaperHeightEdit, aSize.Height(), MapUnit::Map100thMM );
+    SetMetricValue( *m_xPaperWidthEdit, aSize.Width(), MapUnit::Map100thMM );
+
+    CalcMargin_Impl();
+
+    RangeHdl_Impl();
+    UpdateExample_Impl( true );
+
+    if ( eMode != SVX_PAGE_MODE_PRESENTATION )
+        return;
+
+    // Draw: if paper format the margin shall be 1 cm
+    long nTmp = 0;
+    bool bScreen = (( PAPER_SCREEN_4_3 == ePaper )||( PAPER_SCREEN_16_9 == ePaper)||( PAPER_SCREEN_16_10 == ePaper));
+
+    if ( !bScreen )
+        // no margin if screen
+        nTmp = 1; // accordingly 1 cm
+
+    if ( bScreen || m_xRightMarginEdit->get_value(FieldUnit::NONE) == 0 )
+        SetMetricValue( *m_xRightMarginEdit, nTmp, MapUnit::MapCM );
+    if ( bScreen || m_xLeftMarginEdit->get_value(FieldUnit::NONE) == 0 )
+        SetMetricValue( *m_xLeftMarginEdit, nTmp, MapUnit::MapCM );
+    if ( bScreen || m_xBottomMarginEdit->get_value(FieldUnit::NONE) == 0 )
+        SetMetricValue( *m_xBottomMarginEdit, nTmp, MapUnit::MapCM );
+    if ( bScreen || m_xTopMarginEdit->get_value(FieldUnit::NONE) == 0 )
+        SetMetricValue( *m_xTopMarginEdit, nTmp, MapUnit::MapCM );
+    UpdateExample_Impl( true );
+}
+
+IMPL_LINK_NOARG(SvxPageDescPage, PaperSizeModify_Impl, weld::MetricSpinButton&, void)
+{
+    sal_uInt16 nWhich = GetWhich( SID_ATTR_LRSPACE );
+    MapUnit eUnit = GetItemSet().GetPool()->GetMetric( nWhich );
+    Size aSize( GetCoreValue( *m_xPaperWidthEdit, eUnit ),
+                GetCoreValue( *m_xPaperHeightEdit, eUnit ) );
+
+    if ( aSize.Width() > aSize.Height() )
+    {
+        m_xLandscapeBtn->set_active(true);
+        bLandscape = true;
+    }
+    else
+    {
+        m_xPortraitBtn->set_active(true);
+        bLandscape = false;
+    }
+
+    Paper ePaper = SvxPaperInfo::GetSvxPaper( aSize, eUnit );
+    m_xPaperSizeBox->set_active_id( ePaper );
+    UpdateExample_Impl( true );
+
+    RangeHdl_Impl();
+}
+
+IMPL_LINK(SvxPageDescPage, SwapOrientation_Impl, weld::Button&, rBtn, void)
+{
+    if (
+        !((!bLandscape && &rBtn == m_xLandscapeBtn.get()) ||
+        (bLandscape  && &rBtn == m_xPortraitBtn.get()))
+       )
+        return;
+
+    bLandscape = m_xLandscapeBtn->get_active();
+
+    const long lWidth = GetCoreValue( *m_xPaperWidthEdit, MapUnit::Map100thMM );
+    const long lHeight = GetCoreValue( *m_xPaperHeightEdit, MapUnit::Map100thMM );
+
+    // swap width and height
+    SetMetricValue(*m_xPaperWidthEdit, lHeight, MapUnit::Map100thMM);
+    SetMetricValue(*m_xPaperHeightEdit, lWidth, MapUnit::Map100thMM);
+
+    // recalculate margins if necessary
+    CalcMargin_Impl();
+
+    PaperSizeSelect_Impl(m_xPaperSizeBox->get_widget());
+    RangeHdl_Impl();
+    SwapFirstValues_Impl(bBorderModified);
+    UpdateExample_Impl(true);
+}
+
+void SvxPageDescPage::SwapFirstValues_Impl( bool bSet )
+{
+    MapMode aOldMode = mpDefPrinter->GetMapMode();
+    Orientation eOri = Orientation::Portrait;
+
+    if ( bLandscape )
+        eOri = Orientation::Landscape;
+    Orientation eOldOri = mpDefPrinter->GetOrientation();
+    mpDefPrinter->SetOrientation( eOri );
+    mpDefPrinter->SetMapMode(MapMode(MapUnit::MapTwip));
+
+    // set first- and last-values for margins
+    Size aPaperSize = mpDefPrinter->GetPaperSize();
+    Size aPrintSize = mpDefPrinter->GetOutputSize();
+    /*
+     * To convert a point ( 0,0 ) into logic coordinates
+     * looks like nonsense; but it makes sense if the
+     * coordinate system's origin has been moved.
+     */
+    Point aPrintOffset = mpDefPrinter->GetPageOffset() - mpDefPrinter->PixelToLogic( Point() );
+    mpDefPrinter->SetMapMode( aOldMode );
+    mpDefPrinter->SetOrientation( eOldOri );
+
+    sal_Int64 nSetL = m_xLeftMarginEdit->denormalize(
+                    m_xLeftMarginEdit->get_value( FieldUnit::TWIP ) );
+    sal_Int64 nSetR = m_xRightMarginEdit->denormalize(
+                    m_xRightMarginEdit->get_value( FieldUnit::TWIP ) );
+    sal_Int64 nSetT = m_xTopMarginEdit->denormalize(
+                    m_xTopMarginEdit->get_value( FieldUnit::TWIP ) );
+    sal_Int64 nSetB = m_xBottomMarginEdit->denormalize(
+                    m_xBottomMarginEdit->get_value( FieldUnit::TWIP ) );
+
+    long nNewL = aPrintOffset.X();
+    long nNewR = aPaperSize.Width() - aPrintSize.Width() - aPrintOffset.X();
+    long nNewT = aPrintOffset.Y();
+    long nNewB = aPaperSize.Height() - aPrintSize.Height() - aPrintOffset.Y();
+
+    nFirstLeftMargin = m_xLeftMarginEdit->convert_value_from(m_xLeftMarginEdit->normalize(nNewL), FieldUnit::TWIP);
+    nFirstRightMargin = m_xRightMarginEdit->convert_value_from(m_xRightMarginEdit->normalize(nNewR), FieldUnit::TWIP);
+    nFirstTopMargin = m_xTopMarginEdit->convert_value_from(m_xTopMarginEdit->normalize(nNewT), FieldUnit::TWIP);
+    nFirstBottomMargin = m_xBottomMarginEdit->convert_value_from(m_xBottomMarginEdit->normalize(nNewB), FieldUnit::TWIP);
+
+    if ( !bSet )
+        return;
+
+    if ( nSetL < nNewL )
+        m_xLeftMarginEdit->set_value( m_xLeftMarginEdit->normalize( nNewL ),
+                                  FieldUnit::TWIP );
+    if ( nSetR < nNewR )
+        m_xRightMarginEdit->set_value( m_xRightMarginEdit->normalize( nNewR ),
+                                   FieldUnit::TWIP );
+    if ( nSetT < nNewT )
+        m_xTopMarginEdit->set_value( m_xTopMarginEdit->normalize( nNewT ),
+                                 FieldUnit::TWIP );
+    if ( nSetB < nNewB )
+        m_xBottomMarginEdit->set_value( m_xBottomMarginEdit->normalize( nNewB ),
+                                    FieldUnit::TWIP );
+}
+
+IMPL_LINK_NOARG(SvxPageDescPage, BorderModify_Impl, weld::MetricSpinButton&, void)
+{
+    if ( !bBorderModified )
+        bBorderModified = true;
+    UpdateExample_Impl();
+
+    RangeHdl_Impl();
+}
+
+void SvxPageDescPage::UpdateExample_Impl( bool bResetbackground )
+{
+    // Size
+    Size aSize( GetCoreValue( *m_xPaperWidthEdit, MapUnit::MapTwip ),
+                GetCoreValue( *m_xPaperHeightEdit, MapUnit::MapTwip ) );
+
+    m_aBspWin.SetSize( aSize );
+
+    // Margins
+    m_aBspWin.SetTop( GetCoreValue( *m_xTopMarginEdit, MapUnit::MapTwip ) );
+    m_aBspWin.SetBottom( GetCoreValue( *m_xBottomMarginEdit, MapUnit::MapTwip ) );
+    m_aBspWin.SetLeft( GetCoreValue( *m_xLeftMarginEdit, MapUnit::MapTwip ) );
+    m_aBspWin.SetRight( GetCoreValue( *m_xRightMarginEdit, MapUnit::MapTwip ) );
+
+    // Layout
+    m_aBspWin.SetUsage(PosToPageUsage_Impl(m_xLayoutBox->get_active()));
+    if ( bResetbackground )
+        m_aBspWin.ResetBackground();
+    m_aBspWin.Invalidate();
+}
+
+
+void SvxPageDescPage::ResetBackground_Impl(const SfxItemSet& rSet)
+{
+    sal_uInt16 nWhich(GetWhich(SID_ATTR_PAGE_HEADERSET));
+
+    if (SfxItemState::SET == rSet.GetItemState(nWhich, false))
+    {
+        const SvxSetItem& rSetItem = static_cast< const SvxSetItem& >(rSet.Get(nWhich, false));
+        const SfxItemSet& rTmpSet = rSetItem.GetItemSet();
+        const SfxBoolItem& rOn = static_cast< const SfxBoolItem& >(rTmpSet.Get(GetWhich(SID_ATTR_PAGE_ON)));
+
+        if(rOn.GetValue())
+        {
+            drawinglayer::attribute::SdrAllFillAttributesHelperPtr aHeaderFillAttributes;
+
+            if(mbEnableDrawingLayerFillStyles)
+            {
+                // create FillAttributes directly from DrawingLayer FillStyle entries
+                aHeaderFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(rTmpSet);
+            }
+            else
+            {
+                nWhich = GetWhich(SID_ATTR_BRUSH);
+
+                if(SfxItemState::SET == rTmpSet.GetItemState(nWhich))
+                {
+                    // create FillAttributes from SvxBrushItem
+                    const SvxBrushItem& rItem = static_cast< const SvxBrushItem& >(rTmpSet.Get(nWhich));
+                    SfxItemSet aTempSet(*rTmpSet.GetPool(), svl::Items<XATTR_FILL_FIRST, XATTR_FILL_LAST>{});
+
+                    setSvxBrushItemAsFillAttributesToTargetSet(rItem, aTempSet);
+                    aHeaderFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(aTempSet);
+                }
+            }
+
+            m_aBspWin.setHeaderFillAttributes(aHeaderFillAttributes);
+        }
+    }
+
+    nWhich = GetWhich(SID_ATTR_PAGE_FOOTERSET);
+
+    if (SfxItemState::SET == rSet.GetItemState(nWhich, false))
+    {
+        const SvxSetItem& rSetItem = static_cast< const SvxSetItem& >(rSet.Get(nWhich,false));
+        const SfxItemSet& rTmpSet = rSetItem.GetItemSet();
+        const SfxBoolItem& rOn = static_cast< const SfxBoolItem& >(rTmpSet.Get(GetWhich(SID_ATTR_PAGE_ON)));
+
+        if(rOn.GetValue())
+        {
+            drawinglayer::attribute::SdrAllFillAttributesHelperPtr aFooterFillAttributes;
+
+            if(mbEnableDrawingLayerFillStyles)
+            {
+                // create FillAttributes directly from DrawingLayer FillStyle entries
+                aFooterFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(rTmpSet);
+            }
+            else
+            {
+                nWhich = GetWhich(SID_ATTR_BRUSH);
+
+                if(SfxItemState::SET == rTmpSet.GetItemState(nWhich))
+                {
+                    // create FillAttributes from SvxBrushItem
+                    const SvxBrushItem& rItem = static_cast< const SvxBrushItem& >(rTmpSet.Get(nWhich));
+                    SfxItemSet aTempSet(*rTmpSet.GetPool(), svl::Items<XATTR_FILL_FIRST, XATTR_FILL_LAST>{});
+
+                    setSvxBrushItemAsFillAttributesToTargetSet(rItem, aTempSet);
+                    aFooterFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(aTempSet);
+                }
+            }
+
+            m_aBspWin.setFooterFillAttributes(aFooterFillAttributes);
+        }
+    }
+
+    drawinglayer::attribute::SdrAllFillAttributesHelperPtr aPageFillAttributes;
+    const SfxPoolItem* pItem = nullptr;
+
+    if(mbEnableDrawingLayerFillStyles)
+    {
+        // create FillAttributes directly from DrawingLayer FillStyle entries
+        aPageFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(rSet);
+    }
+    else
+    {
+        pItem = GetItem(rSet, SID_ATTR_BRUSH);
+
+        if(pItem)
+        {
+            // create FillAttributes from SvxBrushItem
+            const SvxBrushItem& rItem = static_cast< const SvxBrushItem& >(*pItem);
+            SfxItemSet aTempSet(*rSet.GetPool(), svl::Items<XATTR_FILL_FIRST, XATTR_FILL_LAST>{});
+
+            setSvxBrushItemAsFillAttributesToTargetSet(rItem, aTempSet);
+            aPageFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(aTempSet);
+        }
+    }
+
+    m_aBspWin.setPageFillAttributes(aPageFillAttributes);
+}
+
+void SvxPageDescPage::InitHeadFoot_Impl( const SfxItemSet& rSet )
+{
+    bLandscape = m_xLandscapeBtn->get_active();
+    const SfxPoolItem* pItem = GetItem( rSet, SID_ATTR_PAGE_SIZE );
+
+    if ( pItem )
+        m_aBspWin.SetSize( static_cast<const SvxSizeItem*>(pItem)->GetSize() );
+
+    const SvxSetItem* pSetItem = nullptr;
+
+    // evaluate header attributes
+
+    if ( SfxItemState::SET ==
+         rSet.GetItemState( GetWhich( SID_ATTR_PAGE_HEADERSET ),
+                            false, reinterpret_cast<const SfxPoolItem**>(&pSetItem) ) )
+    {
+        const SfxItemSet& rHeaderSet = pSetItem->GetItemSet();
+        const SfxBoolItem& rHeaderOn =
+            static_cast<const SfxBoolItem&>(rHeaderSet.Get( GetWhich( SID_ATTR_PAGE_ON ) ));
+
+        if ( rHeaderOn.GetValue() )
+        {
+            const SvxSizeItem& rSize = static_cast<const SvxSizeItem&>(
+                rHeaderSet.Get( GetWhich( SID_ATTR_PAGE_SIZE ) ));
+            const SvxULSpaceItem& rUL = static_cast<const SvxULSpaceItem&>(
+                rHeaderSet.Get( GetWhich( SID_ATTR_ULSPACE ) ));
+            long nDist = rUL.GetLower();
+            m_aBspWin.SetHdHeight( rSize.GetSize().Height() - nDist );
+            m_aBspWin.SetHdDist( nDist );
+            const SvxLRSpaceItem& rLR = static_cast<const SvxLRSpaceItem&>(
+                rHeaderSet.Get( GetWhich( SID_ATTR_LRSPACE ) ));
+            m_aBspWin.SetHdLeft( rLR.GetLeft() );
+            m_aBspWin.SetHdRight( rLR.GetRight() );
+            m_aBspWin.SetHeader( true );
+        }
+        else
+            m_aBspWin.SetHeader( false );
+
+        // show background and border in the example
+        drawinglayer::attribute::SdrAllFillAttributesHelperPtr aHeaderFillAttributes;
+
+        if(mbEnableDrawingLayerFillStyles)
+        {
+            // create FillAttributes directly from DrawingLayer FillStyle entries
+            aHeaderFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(rHeaderSet);
+        }
+        else
+        {
+            const sal_uInt16 nWhich(GetWhich(SID_ATTR_BRUSH));
+
+            if(rHeaderSet.GetItemState(nWhich) >= SfxItemState::DEFAULT)
+            {
+                // aBspWin.SetHdColor(rItem.GetColor());
+                const SvxBrushItem& rItem = static_cast< const SvxBrushItem& >(rHeaderSet.Get(nWhich));
+                SfxItemSet aTempSet(*rHeaderSet.GetPool(), svl::Items<XATTR_FILL_FIRST, XATTR_FILL_LAST>{});
+
+                setSvxBrushItemAsFillAttributesToTargetSet(rItem, aTempSet);
+                aHeaderFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(aTempSet);
+            }
+        }
+
+        m_aBspWin.setHeaderFillAttributes(aHeaderFillAttributes);
+    }
+
+    // evaluate footer attributes
+
+    if ( SfxItemState::SET !=
+         rSet.GetItemState( GetWhich( SID_ATTR_PAGE_FOOTERSET ),
+                            false, reinterpret_cast<const SfxPoolItem**>(&pSetItem) ) )
+        return;
+
+    const SfxItemSet& rFooterSet = pSetItem->GetItemSet();
+    const SfxBoolItem& rFooterOn =
+        static_cast<const SfxBoolItem&>(rFooterSet.Get( GetWhich( SID_ATTR_PAGE_ON ) ));
+
+    if ( rFooterOn.GetValue() )
+    {
+        const SvxSizeItem& rSize = static_cast<const SvxSizeItem&>(
+            rFooterSet.Get( GetWhich( SID_ATTR_PAGE_SIZE ) ));
+        const SvxULSpaceItem& rUL = static_cast<const SvxULSpaceItem&>(
+            rFooterSet.Get( GetWhich( SID_ATTR_ULSPACE ) ));
+        long nDist = rUL.GetUpper();
+        m_aBspWin.SetFtHeight( rSize.GetSize().Height() - nDist );
+        m_aBspWin.SetFtDist( nDist );
+        const SvxLRSpaceItem& rLR = static_cast<const SvxLRSpaceItem&>(
+            rFooterSet.Get( GetWhich( SID_ATTR_LRSPACE ) ));
+        m_aBspWin.SetFtLeft( rLR.GetLeft() );
+        m_aBspWin.SetFtRight( rLR.GetRight() );
+        m_aBspWin.SetFooter( true );
+    }
+    else
+        m_aBspWin.SetFooter( false );
+
+    // show background and border in the example
+    drawinglayer::attribute::SdrAllFillAttributesHelperPtr aFooterFillAttributes;
+
+    if(mbEnableDrawingLayerFillStyles)
+    {
+        // create FillAttributes directly from DrawingLayer FillStyle entries
+        aFooterFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(rFooterSet);
+    }
+    else
+    {
+        const sal_uInt16 nWhich(GetWhich(SID_ATTR_BRUSH));
+
+        if(rFooterSet.GetItemState(nWhich) >= SfxItemState::DEFAULT)
+        {
+            // aBspWin.SetFtColor(rItem.GetColor());
+            const SvxBrushItem& rItem = static_cast<const SvxBrushItem&>(rFooterSet.Get(nWhich));
+            SfxItemSet aTempSet(*rFooterSet.GetPool(), svl::Items<XATTR_FILL_FIRST, XATTR_FILL_LAST>{});
+
+            setSvxBrushItemAsFillAttributesToTargetSet(rItem, aTempSet);
+            aFooterFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(aTempSet);
+        }
+    }
+
+    m_aBspWin.setFooterFillAttributes(aFooterFillAttributes);
+}
+
+void SvxPageDescPage::ActivatePage( const SfxItemSet& rSet )
+{
+    InitHeadFoot_Impl( rSet );
+    UpdateExample_Impl();
+    ResetBackground_Impl( rSet );
+    RangeHdl_Impl();
+}
+
+DeactivateRC SvxPageDescPage::DeactivatePage( SfxItemSet* _pSet )
+{
+    // Inquiry whether the page margins are beyond the printing area.
+    // If not, ask user whether they shall be taken.
+    // If not, stay on the TabPage.
+    Paper ePaper = m_xPaperSizeBox->get_active_id();
+
+    if ( ePaper != PAPER_SCREEN_4_3 && ePaper != PAPER_SCREEN_16_9 && ePaper != PAPER_SCREEN_16_10 && IsMarginOutOfRange() )
+    {
+        std::unique_ptr<weld::MessageDialog> xQueryBox(Application::CreateMessageDialog(GetFrameWeld(),
+                                                       VclMessageType::Question, VclButtonsType::YesNo,
+                                                       m_xPrintRangeQueryText->get_label()));
+        xQueryBox->set_default_response(RET_NO);
+        if (xQueryBox->run() == RET_NO)
+        {
+            weld::MetricSpinButton* pField = nullptr;
+            if ( IsPrinterRangeOverflow( *m_xLeftMarginEdit, nFirstLeftMargin, nLastLeftMargin, MARGIN_LEFT ) )
+                pField = m_xLeftMarginEdit.get();
+            if (    IsPrinterRangeOverflow( *m_xRightMarginEdit, nFirstRightMargin, nLastRightMargin, MARGIN_RIGHT )
+                 && !pField )
+                pField = m_xRightMarginEdit.get();
+            if (    IsPrinterRangeOverflow( *m_xTopMarginEdit, nFirstTopMargin, nLastTopMargin, MARGIN_TOP )
+                 && !pField )
+                pField = m_xTopMarginEdit.get();
+            if (    IsPrinterRangeOverflow( *m_xBottomMarginEdit, nFirstBottomMargin, nLastBottomMargin, MARGIN_BOTTOM )
+                 && !pField )
+                pField = m_xBottomMarginEdit.get();
+            if ( pField )
+                pField->grab_focus();
+            UpdateExample_Impl();
+            return DeactivateRC::KeepPage;
+        }
+        else
+            CheckMarginEdits( false );
+    }
+
+    if ( _pSet )
+    {
+        FillItemSet( _pSet );
+
+        // put portray/landscape if applicable
+        sal_uInt16 nWh = GetWhich( SID_ATTR_PAGE_SIZE );
+        MapUnit eUnit = GetItemSet().GetPool()->GetMetric( nWh );
+        Size aSize( GetCoreValue( *m_xPaperWidthEdit, eUnit ),
+                    GetCoreValue( *m_xPaperHeightEdit, eUnit ) );
+
+        // put, if current size is different to the value in _pSet
+        const SvxSizeItem* pSize = GetItem( *_pSet, SID_ATTR_PAGE_SIZE );
+        if ( aSize.Width() && ( !pSize || !IsEqualSize_Impl( pSize, aSize ) ) )
+            _pSet->Put( SvxSizeItem( nWh, aSize ) );
+    }
+
+    return DeactivateRC::LeavePage;
+}
+
+void SvxPageDescPage::RangeHdl_Impl()
+{
+    // example window
+    long nHHeight = m_aBspWin.GetHdHeight();
+    long nHDist = m_aBspWin.GetHdDist();
+
+    long nFHeight = m_aBspWin.GetFtHeight();
+    long nFDist = m_aBspWin.GetFtDist();
+
+    long nHFLeft = std::max(m_aBspWin.GetHdLeft(), m_aBspWin.GetFtLeft());
+    long nHFRight = std::max(m_aBspWin.GetHdRight(), m_aBspWin.GetFtRight());
+
+    // current values for page margins
+    long nBT = static_cast<long>(m_xTopMarginEdit->denormalize(m_xTopMarginEdit->get_value(FieldUnit::TWIP)));
+    long nBB = static_cast<long>(m_xBottomMarginEdit->denormalize(m_xBottomMarginEdit->get_value(FieldUnit::TWIP)));
+    long nBL = static_cast<long>(m_xLeftMarginEdit->denormalize(m_xLeftMarginEdit->get_value(FieldUnit::TWIP)));
+    long nBR = static_cast<long>(m_xRightMarginEdit->denormalize(m_xRightMarginEdit->get_value(FieldUnit::TWIP)));
+
+    // calculate width of page border
+    const SfxItemSet* _pSet = &GetItemSet();
+    Size aBorder;
+
+    if ( _pSet->GetItemState( GetWhich(SID_ATTR_BORDER_SHADOW) ) >=
+            SfxItemState::DEFAULT &&
+         _pSet->GetItemState( GetWhich(SID_ATTR_BORDER_OUTER)  ) >=
+            SfxItemState::DEFAULT )
+    {
+        aBorder = GetMinBorderSpace_Impl(
+            static_cast<const SvxShadowItem&>(_pSet->Get(GetWhich(SID_ATTR_BORDER_SHADOW))),
+            static_cast<const SvxBoxItem&>(_pSet->Get(GetWhich(SID_ATTR_BORDER_OUTER))));
+    }
+
+    // limits paper
+    // maximum is 54 cm
+
+    long nMin = nHHeight + nHDist + nFDist + nFHeight + nBT + nBB +
+                MINBODY + aBorder.Height();
+    m_xPaperHeightEdit->set_min(m_xPaperHeightEdit->normalize(nMin), FieldUnit::TWIP);
+
+    nMin = MINBODY + nBL + nBR + aBorder.Width();
+    m_xPaperWidthEdit->set_min(m_xPaperWidthEdit->normalize(nMin), FieldUnit::TWIP);
+
+    long nH = static_cast<long>(m_xPaperHeightEdit->denormalize(m_xPaperHeightEdit->get_value(FieldUnit::TWIP)));
+    long nW = static_cast<long>(m_xPaperWidthEdit->denormalize(m_xPaperWidthEdit->get_value(FieldUnit::TWIP)));
+
+    // Top
+    long nMax = nH - nBB - aBorder.Height() - MINBODY -
+                nFDist - nFHeight - nHDist - nHHeight;
+
+    m_xTopMarginEdit->set_max(m_xTopMarginEdit->normalize(nMax), FieldUnit::TWIP);
+
+    // Bottom
+    nMax = nH - nBT - aBorder.Height() - MINBODY -
+           nFDist - nFHeight - nHDist - nHHeight;
+
+    m_xBottomMarginEdit->set_max(m_xTopMarginEdit->normalize(nMax), FieldUnit::TWIP);
+
+    // Left
+    nMax = nW - nBR - MINBODY - aBorder.Width() - nHFLeft - nHFRight;
+    m_xLeftMarginEdit->set_max(m_xLeftMarginEdit->normalize(nMax), FieldUnit::TWIP);
+
+    // Right
+    nMax = nW - nBL - MINBODY - aBorder.Width() - nHFLeft - nHFRight;
+    m_xRightMarginEdit->set_max(m_xRightMarginEdit->normalize(nMax), FieldUnit::TWIP);
+}
+
+void SvxPageDescPage::CalcMargin_Impl()
+{
+    // current values for page margins
+    long nBT = GetCoreValue( *m_xTopMarginEdit, MapUnit::MapTwip );
+    long nBB = GetCoreValue( *m_xBottomMarginEdit, MapUnit::MapTwip );
+
+    long nBL = GetCoreValue( *m_xLeftMarginEdit, MapUnit::MapTwip );
+    long nBR = GetCoreValue( *m_xRightMarginEdit, MapUnit::MapTwip );
+
+    long nH  = GetCoreValue( *m_xPaperHeightEdit, MapUnit::MapTwip );
+    long nW  = GetCoreValue( *m_xPaperWidthEdit, MapUnit::MapTwip );
+
+    long nWidth = nBL + nBR + MINBODY;
+    long nHeight = nBT + nBB + MINBODY;
+
+    if ( !(nWidth > nW || nHeight > nH) )
+        return;
+
+    if ( nWidth > nW )
+    {
+        long nTmp = nBL <= nBR ? nBR : nBL;
+        nTmp -= nWidth - nW;
+
+        if ( nBL <= nBR )
+            SetMetricValue( *m_xRightMarginEdit, nTmp, MapUnit::MapTwip );
+        else
+            SetMetricValue( *m_xLeftMarginEdit, nTmp, MapUnit::MapTwip );
+    }
+
+    if ( nHeight > nH )
+    {
+        long nTmp = nBT <= nBB ? nBB : nBT;
+        nTmp -= nHeight - nH;
+
+        if ( nBT <= nBB )
+            SetMetricValue( *m_xBottomMarginEdit, nTmp, MapUnit::MapTwip );
+        else
+            SetMetricValue( *m_xTopMarginEdit, nTmp, MapUnit::MapTwip );
+    }
+}
+
+IMPL_LINK_NOARG(SvxPageDescPage, CenterHdl_Impl, weld::ToggleButton&, void)
+{
+    m_aBspWin.SetHorz(m_xHorzBox->get_active());
+    m_aBspWin.SetVert(m_xVertBox->get_active());
+    UpdateExample_Impl();
+}
+
+void SvxPageDescPage::SetCollectionList(const std::vector<OUString> &aList)
+{
+    OSL_ENSURE(!aList.empty(), "Empty string list");
+
+    sStandardRegister = aList[0];
+    m_xRegisterLB->freeze();
+    for (size_t i = 1; i < aList.size(); ++i)
+        m_xRegisterLB->append_text(aList[i]);
+    m_xRegisterLB->thaw();
+
+    m_xRegisterCB->show();
+    m_xRegisterFT->show();
+    m_xRegisterLB->show();
+    m_xRegisterCB->connect_toggled(LINK(this, SvxPageDescPage, RegisterModify));
+}
+
+IMPL_LINK(SvxPageDescPage, RegisterModify, weld::ToggleButton&, rBox, void)
+{
+    bool bEnable = false;
+    if (rBox.get_active())
+    {
+        bEnable = true;
+        if (m_xRegisterLB->get_active() == -1)
+            m_xRegisterLB->set_active_text(sStandardRegister);
+    }
+    m_xRegisterFT->set_sensitive(bEnable);
+    m_xRegisterLB->set_sensitive(bEnable);
+}
+
+void SvxPageDescPage::DisableVerticalPageDir()
+{
+    m_xTextFlowBox->remove_id(SvxFrameDirection::Vertical_RL_TB);
+    m_xTextFlowBox->remove_id(SvxFrameDirection::Vertical_LR_TB);
+    if (m_xTextFlowBox->get_count() < 2)
+    {
+        m_xTextFlowLbl->hide();
+        m_xTextFlowBox->hide();
+        m_aBspWin.EnableFrameDirection( false );
+    }
+}
+
+IMPL_LINK_NOARG(SvxPageDescPage, FrameDirectionModify_Impl, weld::ComboBox&, void)
+{
+    m_aBspWin.SetFrameDirection(m_xTextFlowBox->get_active_id());
+    m_aBspWin.Invalidate();
+}
+
+bool SvxPageDescPage::IsPrinterRangeOverflow(
+    weld::MetricSpinButton& rField, long nFirstMargin, long nLastMargin, MarginPosition nPos )
+{
+    bool bRet = false;
+    bool bCheck = ( ( m_nPos & nPos ) == 0 );
+    long nValue = rField.get_value(FieldUnit::NONE);
+    if ( bCheck &&
+         (  nValue < nFirstMargin || nValue > nLastMargin ) &&
+         rField.get_value_changed_from_saved() )
+    {
+        rField.set_value(nValue < nFirstMargin ? nFirstMargin : nLastMargin, FieldUnit::NONE);
+        bRet = true;
+    }
+
+    return bRet;
+}
+
+/** Check if a value of a margin edit is outside the printer paper margins
+    and save this information.
+*/
+void SvxPageDescPage::CheckMarginEdits( bool _bClear )
+{
+    if ( _bClear )
+        m_nPos = 0;
+
+    sal_Int64 nValue = m_xLeftMarginEdit->get_value(FieldUnit::NONE);
+    if (  nValue < nFirstLeftMargin || nValue > nLastLeftMargin )
+        m_nPos |= MARGIN_LEFT;
+    nValue = m_xRightMarginEdit->get_value(FieldUnit::NONE);
+    if (  nValue < nFirstRightMargin || nValue > nLastRightMargin )
+        m_nPos |= MARGIN_RIGHT;
+    nValue = m_xTopMarginEdit->get_value(FieldUnit::NONE);
+    if (  nValue < nFirstTopMargin || nValue > nLastTopMargin )
+        m_nPos |= MARGIN_TOP;
+    nValue = m_xBottomMarginEdit->get_value(FieldUnit::NONE);
+    if (  nValue < nFirstBottomMargin || nValue > nLastBottomMargin )
+        m_nPos |= MARGIN_BOTTOM;
+}
+
+bool SvxPageDescPage::IsMarginOutOfRange() const
+{
+    bool bRet = ( ( ( !( m_nPos & MARGIN_LEFT ) &&
+                      m_xLeftMarginEdit->get_value_changed_from_saved() ) &&
+                    ( m_xLeftMarginEdit->get_value(FieldUnit::NONE) < nFirstLeftMargin ||
+                      m_xLeftMarginEdit->get_value(FieldUnit::NONE) > nLastLeftMargin ) ) ||
+                  ( ( !( m_nPos & MARGIN_RIGHT ) &&
+                      m_xRightMarginEdit->get_value_changed_from_saved() ) &&
+                    ( m_xRightMarginEdit->get_value(FieldUnit::NONE) < nFirstRightMargin ||
+                      m_xRightMarginEdit->get_value(FieldUnit::NONE) > nLastRightMargin ) ) ||
+                  ( ( !( m_nPos & MARGIN_TOP ) &&
+                      m_xTopMarginEdit->get_value_changed_from_saved() ) &&
+                    ( m_xTopMarginEdit->get_value(FieldUnit::NONE) < nFirstTopMargin ||
+                      m_xTopMarginEdit->get_value(FieldUnit::NONE) > nLastTopMargin ) ) ||
+                  ( ( !( m_nPos & MARGIN_BOTTOM ) &&
+                      m_xBottomMarginEdit->get_value_changed_from_saved() ) &&
+                    ( m_xBottomMarginEdit->get_value(FieldUnit::NONE) < nFirstBottomMargin ||
+                      m_xBottomMarginEdit->get_value(FieldUnit::NONE) > nLastBottomMargin ) ) );
+    return bRet;
+}
+
+void SvxPageDescPage::PageCreated(const SfxAllItemSet& aSet)
+{
+    const SfxUInt16Item* pModeItem = aSet.GetItem(SID_ENUM_PAGE_MODE, false);
+    const SfxUInt16Item* pPaperStartItem = aSet.GetItem(SID_PAPER_START, false);
+    const SfxUInt16Item* pPaperEndItem = aSet.GetItem(SID_PAPER_END, false);
+    const SfxStringListItem* pCollectListItem = aSet.GetItem<SfxStringListItem>(SID_COLLECT_LIST, false);
+    const SfxBoolItem* pSupportDrawingLayerFillStyleItem = aSet.GetItem<SfxBoolItem>(SID_DRAWINGLAYER_FILLSTYLES, false);
+    const SfxBoolItem* pIsImpressDoc = aSet.GetItem<SfxBoolItem>(SID_IMPRESS_DOC, false);
+
+    if (pModeItem)
+    {
+        eMode = static_cast<SvxModeType>(pModeItem->GetValue());
+    }
+
+    if(pPaperStartItem && pPaperEndItem)
+    {
+        SetPaperFormatRanges(static_cast<Paper>(pPaperStartItem->GetValue()));
+    }
+
+    if(pCollectListItem)
+    {
+        SetCollectionList(pCollectListItem->GetList());
+    }
+
+    if(pSupportDrawingLayerFillStyleItem)
+    {
+        const bool bNew(pSupportDrawingLayerFillStyleItem->GetValue());
+
+        mbEnableDrawingLayerFillStyles = bNew;
+    }
+
+    if (pIsImpressDoc)
+        m_xNumberFormatText->set_label(SvxResId(STR_SLIDE_NUMBERS));
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */