Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1584 insertions, 0 deletions

diff --git a/cui/source/tabpages/transfrm.cxx b/cui/source/tabpages/transfrm.cxx
new file mode 100644
index 000000000..77c3b7e7e
--- /dev/null
+++ b/cui/source/tabpages/transfrm.cxx
@@ -0,0 +1,1584 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <sal/config.h>
+
+#include <algorithm>
+
+#include <svx/EnhancedCustomShape2d.hxx>
+#include <svx/svdundo.hxx>
+#include <svx/svdview.hxx>
+#include <svx/svdobj.hxx>
+#include <svx/svdpagv.hxx>
+#include <svx/svdoashp.hxx>
+#include <svx/sderitm.hxx>
+#include <svx/svxids.hrc>
+#include <svx/transfrmhelper.hxx>
+#include <svtools/unitconv.hxx>
+
+#include <transfrm.hxx>
+#include <svx/dlgutil.hxx>
+#include <svx/anchorid.hxx>
+#include <svl/rectitem.hxx>
+#include <swpossizetabpage.hxx>
+#include <vcl/canvastools.hxx>
+#include <vcl/fieldvalues.hxx>
+
+// static ----------------------------------------------------------------
+
+const sal_uInt16 SvxPositionSizeTabPage::pPosSizeRanges[] =
+{
+    SID_ATTR_TRANSFORM_POS_X,
+    SID_ATTR_TRANSFORM_POS_Y,
+    SID_ATTR_TRANSFORM_PROTECT_POS,
+    SID_ATTR_TRANSFORM_PROTECT_POS,
+    SID_ATTR_TRANSFORM_INTERN,
+    SID_ATTR_TRANSFORM_INTERN,
+    SID_ATTR_TRANSFORM_ANCHOR,
+    SID_ATTR_TRANSFORM_VERT_ORIENT,
+    SID_ATTR_TRANSFORM_WIDTH,
+    SID_ATTR_TRANSFORM_SIZE_POINT,
+    SID_ATTR_TRANSFORM_PROTECT_POS,
+    SID_ATTR_TRANSFORM_INTERN,
+    SID_ATTR_TRANSFORM_AUTOWIDTH,
+    SID_ATTR_TRANSFORM_AUTOHEIGHT,
+    0
+};
+
+const sal_uInt16 SvxAngleTabPage::pAngleRanges[] =
+{
+    SID_ATTR_TRANSFORM_ROT_X,
+    SID_ATTR_TRANSFORM_ANGLE,
+    SID_ATTR_TRANSFORM_INTERN,
+    SID_ATTR_TRANSFORM_INTERN,
+    0
+};
+
+const sal_uInt16 SvxSlantTabPage::pSlantRanges[] =
+{
+    SDRATTR_ECKENRADIUS,
+    SDRATTR_ECKENRADIUS,
+    SID_ATTR_TRANSFORM_SHEAR,
+    SID_ATTR_TRANSFORM_SHEAR_VERTICAL,
+    SID_ATTR_TRANSFORM_INTERN,
+    SID_ATTR_TRANSFORM_INTERN,
+    0
+};
+
+/*************************************************************************
+|*
+|* constructor of the tab dialog: adds the pages to the dialog
+|*
+\************************************************************************/
+
+SvxTransformTabDialog::SvxTransformTabDialog(weld::Window* pParent, const SfxItemSet* pAttr,
+                                             const SdrView* pSdrView, SvxAnchorIds nAnchorTypes)
+    : SfxTabDialogController(pParent, "cui/ui/positionsizedialog.ui", "PositionAndSizeDialog", pAttr)
+    , pView(pSdrView)
+    , nAnchorCtrls(nAnchorTypes)
+{
+    DBG_ASSERT(pView, "no valid view (!)");
+
+    //different positioning page in Writer
+    if(nAnchorCtrls & (SvxAnchorIds::Paragraph | SvxAnchorIds::Character | SvxAnchorIds::Page | SvxAnchorIds::Fly))
+    {
+        AddTabPage("RID_SVXPAGE_SWPOSSIZE", SvxSwPosSizeTabPage::Create, SvxSwPosSizeTabPage::GetRanges);
+        RemoveTabPage("RID_SVXPAGE_POSITION_SIZE");
+    }
+    else
+    {
+        AddTabPage("RID_SVXPAGE_POSITION_SIZE", SvxPositionSizeTabPage::Create, SvxPositionSizeTabPage::GetRanges);
+        RemoveTabPage("RID_SVXPAGE_SWPOSSIZE");
+    }
+
+    AddTabPage("RID_SVXPAGE_ANGLE", SvxAngleTabPage::Create, SvxAngleTabPage::GetRanges);
+    AddTabPage("RID_SVXPAGE_SLANT", SvxSlantTabPage::Create, SvxSlantTabPage::GetRanges);
+}
+
+
+void SvxTransformTabDialog::PageCreated(const OString& rId, SfxTabPage &rPage)
+{
+    if (rId == "RID_SVXPAGE_POSITION_SIZE")
+    {
+        SvxPositionSizeTabPage& rSvxPos =  static_cast<SvxPositionSizeTabPage&>(rPage);
+        rSvxPos.SetView(pView);
+        rSvxPos.Construct();
+
+        if(nAnchorCtrls & SvxAnchorIds::NoResize)
+        {
+            rSvxPos.DisableResize();
+        }
+
+        if(nAnchorCtrls & SvxAnchorIds::NoProtect)
+        {
+            rSvxPos.DisableProtect();
+            rSvxPos.UpdateControlStates();
+        }
+    }
+    else if (rId == "RID_SVXPAGE_SWPOSSIZE")
+    {
+        SvxSwPosSizeTabPage& rSwPos =  static_cast<SvxSwPosSizeTabPage&>(rPage);
+
+        rSwPos.EnableAnchorTypes(nAnchorCtrls);
+        rSwPos.SetValidateFramePosLink(aValidateLink);
+        rSwPos.SetView(pView);
+    }
+    else if (rId == "RID_SVXPAGE_ANGLE")
+    {
+        SvxAngleTabPage& rSvxAng =  static_cast<SvxAngleTabPage&>(rPage);
+
+        rSvxAng.SetView( pView );
+        rSvxAng.Construct();
+    }
+    else if (rId == "RID_SVXPAGE_SLANT")
+    {
+        SvxSlantTabPage& rSvxSlnt =  static_cast<SvxSlantTabPage&>(rPage);
+
+        rSvxSlnt.SetView( pView );
+        rSvxSlnt.Construct();
+    }
+}
+
+void SvxTransformTabDialog::SetValidateFramePosLink(const Link<SvxSwFrameValidation&,void>& rLink)
+{
+    aValidateLink = rLink;
+}
+
+/*************************************************************************
+|*
+|*      dialog for changing the positions of the rotation
+|*      angle and the rotation angle of the graphic objects
+|*
+\************************************************************************/
+SvxAngleTabPage::SvxAngleTabPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rInAttrs)
+    : SvxTabPage(pPage, pController, "cui/ui/rotationtabpage.ui", "Rotation", rInAttrs)
+    , pView(nullptr)
+    , eDlgUnit(FieldUnit::NONE)
+    , m_aCtlRect(this)
+    , m_xFlPosition(m_xBuilder->weld_widget("FL_POSITION"))
+    , m_xMtrPosX(m_xBuilder->weld_metric_spin_button("MTR_FLD_POS_X", FieldUnit::CM))
+    , m_xMtrPosY(m_xBuilder->weld_metric_spin_button("MTR_FLD_POS_Y", FieldUnit::CM))
+    , m_xCtlRect(new weld::CustomWeld(*m_xBuilder, "CTL_RECT", m_aCtlRect))
+    , m_xFlAngle(m_xBuilder->weld_widget("FL_ANGLE"))
+    , m_xNfAngle(m_xBuilder->weld_metric_spin_button("NF_ANGLE", FieldUnit::DEGREE))
+    , m_xCtlAngle(new svx::DialControl)
+    , m_xCtlAngleWin(new weld::CustomWeld(*m_xBuilder, "CTL_ANGLE", *m_xCtlAngle))
+{
+    // calculate PoolUnit
+    SfxItemPool* pPool = rInAttrs.GetPool();
+    DBG_ASSERT( pPool, "no pool (!)" );
+    ePoolUnit = pPool->GetMetric(SID_ATTR_TRANSFORM_POS_X);
+
+    m_xCtlAngle->SetLinkedField(m_xNfAngle.get(), 2);
+}
+
+SvxAngleTabPage::~SvxAngleTabPage()
+{
+}
+
+void SvxAngleTabPage::Construct()
+{
+    DBG_ASSERT(pView, "No valid view (!)");
+    eDlgUnit = GetModuleFieldUnit(GetItemSet());
+    SetFieldUnit(*m_xMtrPosX, eDlgUnit, true);
+    SetFieldUnit(*m_xMtrPosY, eDlgUnit, true);
+
+    if (FieldUnit::MILE == eDlgUnit || FieldUnit::KM == eDlgUnit)
+    {
+        m_xMtrPosX->set_digits(3);
+        m_xMtrPosY->set_digits(3);
+    }
+
+    { // #i75273#
+        ::tools::Rectangle aTempRect(pView->GetAllMarkedRect());
+        pView->GetSdrPageView()->LogicToPagePos(aTempRect);
+        maRange = vcl::unotools::b2DRectangleFromRectangle(aTempRect);
+    }
+
+    // Take anchor into account (Writer)
+    const SdrMarkList& rMarkList = pView->GetMarkedObjectList();
+
+    if(rMarkList.GetMarkCount())
+    {
+        const SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();
+        maAnchor = basegfx::B2DPoint(pObj->GetAnchorPos().X(), pObj->GetAnchorPos().Y());
+
+        if(!maAnchor.equalZero()) // -> Writer
+        {
+            maRange = basegfx::B2DRange(maRange.getMinimum() - maAnchor, maRange.getMaximum() - maAnchor);
+        }
+    }
+
+    // take scale into account
+    const Fraction aUIScale(pView->GetModel()->GetUIScale());
+    TransfrmHelper::ScaleRect(maRange, aUIScale);
+
+    // take UI units into account
+    sal_uInt16 nDigits(m_xMtrPosX->get_digits());
+    TransfrmHelper::ConvertRect(maRange, nDigits, ePoolUnit, eDlgUnit);
+
+    if(!pView->IsRotateAllowed())
+    {
+        m_xFlPosition->set_sensitive(false);
+        m_xFlAngle->set_sensitive(false);
+    }
+}
+
+bool SvxAngleTabPage::FillItemSet(SfxItemSet* rSet)
+{
+    bool bModified = false;
+
+    if (m_xCtlAngle->IsValueModified() || m_xMtrPosX->get_value_changed_from_saved() || m_xMtrPosY->get_value_changed_from_saved())
+    {
+        const double fUIScale(double(pView->GetModel()->GetUIScale()));
+        const double fTmpX((GetCoreValue(*m_xMtrPosX, ePoolUnit) + maAnchor.getX()) * fUIScale);
+        const double fTmpY((GetCoreValue(*m_xMtrPosY, ePoolUnit) + maAnchor.getY()) * fUIScale);
+
+        rSet->Put(SfxInt32Item(GetWhich(SID_ATTR_TRANSFORM_ANGLE), m_xCtlAngle->GetRotation()));
+        rSet->Put(SfxInt32Item(GetWhich(SID_ATTR_TRANSFORM_ROT_X), basegfx::fround(fTmpX)));
+        rSet->Put(SfxInt32Item(GetWhich(SID_ATTR_TRANSFORM_ROT_Y), basegfx::fround(fTmpY)));
+
+        bModified = true;
+    }
+
+    return bModified;
+}
+
+
+void SvxAngleTabPage::Reset(const SfxItemSet* rAttrs)
+{
+    const double fUIScale(double(pView->GetModel()->GetUIScale()));
+
+    const SfxPoolItem* pItem = GetItem( *rAttrs, SID_ATTR_TRANSFORM_ROT_X );
+    if(pItem)
+    {
+        const double fTmp((static_cast<double>(static_cast<const SfxInt32Item*>(pItem)->GetValue()) - maAnchor.getX()) / fUIScale);
+        SetMetricValue(*m_xMtrPosX, basegfx::fround(fTmp), ePoolUnit);
+    }
+    else
+    {
+        m_xMtrPosX->set_text(OUString());
+    }
+
+    pItem = GetItem(*rAttrs, SID_ATTR_TRANSFORM_ROT_Y);
+    if(pItem)
+    {
+        const double fTmp((static_cast<double>(static_cast<const SfxInt32Item*>(pItem)->GetValue()) - maAnchor.getY()) / fUIScale);
+        SetMetricValue(*m_xMtrPosY, basegfx::fround(fTmp), ePoolUnit);
+    }
+    else
+    {
+        m_xMtrPosY->set_text(OUString());
+    }
+
+    pItem = GetItem( *rAttrs, SID_ATTR_TRANSFORM_ANGLE );
+    if(pItem)
+    {
+        m_xCtlAngle->SetRotation(static_cast<const SfxInt32Item*>(pItem)->GetValue());
+    }
+    else
+    {
+        m_xCtlAngle->SetRotation(0);
+    }
+    m_xCtlAngle->SaveValue();
+    m_xMtrPosX->save_value();
+    m_xMtrPosY->save_value();
+}
+
+std::unique_ptr<SfxTabPage> SvxAngleTabPage::Create(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rSet)
+{
+    return std::make_unique<SvxAngleTabPage>(pPage, pController, *rSet);
+}
+
+void SvxAngleTabPage::ActivatePage(const SfxItemSet& rSet)
+{
+    SfxBoolItem const * bPosProtect = nullptr;
+    if(SfxItemState::SET == rSet.GetItemState( GetWhich(SID_ATTR_TRANSFORM_PROTECT_POS  ) , false, reinterpret_cast<SfxPoolItem const **>(&bPosProtect) ))
+    {
+        m_xFlPosition->set_sensitive(!bPosProtect->GetValue());
+        m_xFlAngle->set_sensitive(!bPosProtect->GetValue());
+    }
+}
+
+DeactivateRC SvxAngleTabPage::DeactivatePage( SfxItemSet* _pSet )
+{
+    if(_pSet)
+    {
+        FillItemSet(_pSet);
+    }
+
+    return DeactivateRC::LeavePage;
+}
+
+void SvxAngleTabPage::PointChanged(weld::DrawingArea* pDrawingArea, RectPoint eRP)
+{
+    if (pDrawingArea != m_aCtlRect.GetDrawingArea())
+        return;
+
+    switch(eRP)
+    {
+        case RectPoint::LT:
+        {
+            m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FieldUnit::NONE );
+            m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FieldUnit::NONE );
+            break;
+        }
+        case RectPoint::MT:
+        {
+            m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FieldUnit::NONE );
+            m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FieldUnit::NONE );
+            break;
+        }
+        case RectPoint::RT:
+        {
+            m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FieldUnit::NONE );
+            m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FieldUnit::NONE );
+            break;
+        }
+        case RectPoint::LM:
+        {
+            m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FieldUnit::NONE );
+            m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FieldUnit::NONE );
+            break;
+        }
+        case RectPoint::MM:
+        {
+            m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FieldUnit::NONE );
+            m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FieldUnit::NONE );
+            break;
+        }
+        case RectPoint::RM:
+        {
+            m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FieldUnit::NONE );
+            m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FieldUnit::NONE );
+            break;
+        }
+        case RectPoint::LB:
+        {
+            m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FieldUnit::NONE );
+            m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FieldUnit::NONE );
+            break;
+        }
+        case RectPoint::MB:
+        {
+            m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FieldUnit::NONE );
+            m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FieldUnit::NONE );
+            break;
+        }
+        case RectPoint::RB:
+        {
+            m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FieldUnit::NONE );
+            m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FieldUnit::NONE );
+            break;
+        }
+    }
+}
+
+/*************************************************************************
+|*
+|*      dialog for changing slant and corner radius
+|*
+\************************************************************************/
+SvxSlantTabPage::SvxSlantTabPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rInAttrs)
+    : SfxTabPage(pPage, pController, "cui/ui/slantcornertabpage.ui", "SlantAndCornerRadius", &rInAttrs)
+    , pView(nullptr)
+    , eDlgUnit(FieldUnit::NONE)
+    , m_xFlRadius(m_xBuilder->weld_widget("FL_RADIUS"))
+    , m_xMtrRadius(m_xBuilder->weld_metric_spin_button("MTR_FLD_RADIUS", FieldUnit::CM))
+    , m_xFlAngle(m_xBuilder->weld_widget("FL_SLANT"))
+    , m_xMtrAngle(m_xBuilder->weld_metric_spin_button("MTR_FLD_ANGLE", FieldUnit::DEGREE))
+{
+    for (int i = 0; i < 2; ++i)
+    {
+        m_aControlGroups[i] = m_xBuilder->weld_widget("controlgroups" + OString::number(i+1));
+        m_aControlGroupX[i] = m_xBuilder->weld_widget("controlgroupx" + OString::number(i+1));
+        m_aControlX[i] = m_xBuilder->weld_metric_spin_button("controlx" + OString::number(i+1), FieldUnit::CM);
+        m_aControlGroupY[i] = m_xBuilder->weld_widget("controlgroupy" + OString::number(i+1));
+        m_aControlY[i] = m_xBuilder->weld_metric_spin_button("controly" + OString::number(i+1), FieldUnit::CM);
+    }
+
+    // this page needs ExchangeSupport
+    SetExchangeSupport();
+
+    // evaluate PoolUnit
+    SfxItemPool* pPool = rInAttrs.GetPool();
+    assert(pPool && "no pool (!)");
+    ePoolUnit = pPool->GetMetric( SID_ATTR_TRANSFORM_POS_X );
+}
+
+SvxSlantTabPage::~SvxSlantTabPage()
+{
+}
+
+void SvxSlantTabPage::Construct()
+{
+    // get the range
+    DBG_ASSERT(pView, "no valid view (!)");
+    eDlgUnit = GetModuleFieldUnit(GetItemSet());
+    SetFieldUnit(*m_xMtrRadius, eDlgUnit, true);
+    for (int i = 0; i < 2; ++i)
+    {
+        SetFieldUnit(*m_aControlX[i], eDlgUnit, true);
+        SetFieldUnit(*m_aControlY[i], eDlgUnit, true);
+    }
+
+    { // #i75273#
+        ::tools::Rectangle aTempRect(pView->GetAllMarkedRect());
+        pView->GetSdrPageView()->LogicToPagePos(aTempRect);
+    }
+}
+
+bool SvxSlantTabPage::FillItemSet(SfxItemSet* rAttrs)
+{
+    bool  bModified = false;
+
+    if (m_xMtrRadius->get_value_changed_from_saved())
+    {
+        Fraction aUIScale = pView->GetModel()->GetUIScale();
+        long nTmp = long(GetCoreValue(*m_xMtrRadius, ePoolUnit) * aUIScale);
+
+        rAttrs->Put( makeSdrEckenradiusItem( nTmp ) );
+        bModified = true;
+    }
+
+    if (m_xMtrAngle->get_value_changed_from_saved())
+    {
+        sal_Int32 nValue = static_cast<sal_Int32>(m_xMtrAngle->get_value(FieldUnit::NONE));
+        rAttrs->Put( SfxInt32Item( SID_ATTR_TRANSFORM_SHEAR, nValue ) );
+        bModified = true;
+    }
+
+    if( bModified )
+    {
+        // set reference points
+        ::tools::Rectangle aObjectRect(pView->GetAllMarkedRect());
+        pView->GetSdrPageView()->LogicToPagePos(aObjectRect);
+        Point aPt = aObjectRect.Center();
+
+        rAttrs->Put(SfxInt32Item(SID_ATTR_TRANSFORM_SHEAR_X, aPt.X()));
+        rAttrs->Put(SfxInt32Item(SID_ATTR_TRANSFORM_SHEAR_Y, aPt.Y()));
+        rAttrs->Put( SfxBoolItem( SID_ATTR_TRANSFORM_SHEAR_VERTICAL, false ) );
+    }
+
+    bool bControlPointsChanged = false;
+    for (int i = 0; i < 2; ++i)
+    {
+        bControlPointsChanged |= (m_aControlX[i]->get_value_changed_from_saved() ||
+                                  m_aControlY[i]->get_value_changed_from_saved());
+    }
+
+    if (!bControlPointsChanged)
+        return bModified;
+
+    bool bSelectionIsSdrObjCustomShape(false);
+
+    while(true)
+    {
+        if(nullptr == pView)
+        {
+            break;
+        }
+
+        if(0 == pView->GetMarkedObjectList().GetMarkCount())
+        {
+            break;
+        }
+
+        SdrObject* pCandidate(pView->GetMarkedObjectList().GetMark(0)->GetMarkedSdrObj());
+
+        if(nullptr == pCandidate)
+        {
+            break;
+        }
+
+        if(nullptr == dynamic_cast< SdrObjCustomShape* >(pCandidate))
+        {
+            break;
+        }
+
+        bSelectionIsSdrObjCustomShape = true;
+        break;
+    }
+
+    if(bSelectionIsSdrObjCustomShape)
+    {
+        SdrObjCustomShape& rSdrObjCustomShape(
+            static_cast< SdrObjCustomShape& >(
+                *pView->GetMarkedObjectList().GetMark(0)->GetMarkedSdrObj()));
+        SdrModel& rModel(rSdrObjCustomShape.getSdrModelFromSdrObject());
+        std::unique_ptr<SdrUndoAction> pUndo;
+        if (rModel.IsUndoEnabled())
+            pUndo = rModel.GetSdrUndoFactory().CreateUndoAttrObject(rSdrObjCustomShape);
+
+        if(pUndo)
+        {
+            rModel.BegUndo(pUndo->GetComment());
+        }
+
+        EnhancedCustomShape2d aShape(rSdrObjCustomShape);
+        ::tools::Rectangle aLogicRect = aShape.GetLogicRect();
+
+        for (int i = 0; i < 2; ++i)
+        {
+            if (m_aControlX[i]->get_value_changed_from_saved() || m_aControlY[i]->get_value_changed_from_saved())
+            {
+                Point aNewPosition(GetCoreValue(*m_aControlX[i], ePoolUnit),
+                                GetCoreValue(*m_aControlY[i], ePoolUnit));
+                aNewPosition.Move(aLogicRect.Left(), aLogicRect.Top());
+
+                css::awt::Point aPosition;
+                aPosition.X = aNewPosition.X();
+                aPosition.Y = aNewPosition.Y();
+
+                aShape.SetHandleControllerPosition(i, aPosition);
+            }
+        }
+
+        rSdrObjCustomShape.SetChanged();
+        rSdrObjCustomShape.BroadcastObjectChange();
+        bModified = true;
+
+        if (pUndo)
+        {
+            rModel.AddUndo(std::move(pUndo));
+            rModel.EndUndo();
+        }
+    }
+
+    return bModified;
+}
+
+void SvxSlantTabPage::Reset(const SfxItemSet* rAttrs)
+{
+    // if the view has selected objects, items with SfxItemState::DEFAULT need to be disabled
+    const SfxPoolItem* pItem;
+
+    // corner radius
+    if(!pView->IsEdgeRadiusAllowed())
+    {
+        m_xMtrRadius->set_text("");
+        m_xFlRadius->set_sensitive(false);
+    }
+    else
+    {
+        pItem = GetItem( *rAttrs, SDRATTR_ECKENRADIUS );
+
+        if( pItem )
+        {
+            const double fUIScale(double(pView->GetModel()->GetUIScale()));
+            const double fTmp(static_cast<double>(static_cast<const SdrMetricItem*>(pItem)->GetValue()) / fUIScale);
+            SetMetricValue(*m_xMtrRadius, basegfx::fround(fTmp), ePoolUnit);
+        }
+        else
+        {
+            m_xMtrRadius->set_text("");
+        }
+    }
+
+    m_xMtrRadius->save_value();
+
+    // slant: angle
+    if( !pView->IsShearAllowed() )
+    {
+        m_xMtrAngle->set_text( "" );
+        m_xFlAngle->set_sensitive(false);
+    }
+    else
+    {
+        pItem = GetItem( *rAttrs, SID_ATTR_TRANSFORM_SHEAR );
+
+        if( pItem )
+        {
+            m_xMtrAngle->set_value(static_cast<const SfxInt32Item*>(pItem)->GetValue(), FieldUnit::NONE);
+        }
+        else
+        {
+            m_xMtrAngle->set_text("");
+        }
+    }
+
+    m_xMtrAngle->save_value();
+
+    bool bSelectionIsSdrObjCustomShape(false);
+
+    while(true)
+    {
+        if(1 != pView->GetMarkedObjectList().GetMarkCount())
+        {
+            break;
+        }
+
+        SdrObject* pCandidate(pView->GetMarkedObjectList().GetMark(0)->GetMarkedSdrObj());
+
+        if(nullptr == pCandidate)
+        {
+            break;
+        }
+
+        if(nullptr == dynamic_cast< SdrObjCustomShape* >(pCandidate))
+        {
+            break;
+        }
+
+        bSelectionIsSdrObjCustomShape = true;
+        break;
+    }
+
+    if(bSelectionIsSdrObjCustomShape)
+    {
+        SdrObjCustomShape& rSdrObjCustomShape(
+            static_cast< SdrObjCustomShape& >(
+                *pView->GetMarkedObjectList().GetMark(0)->GetMarkedSdrObj()));
+
+        //save geometry
+        SdrCustomShapeGeometryItem aInitialGeometry(rSdrObjCustomShape.GetMergedItem(SDRATTR_CUSTOMSHAPE_GEOMETRY));
+        EnhancedCustomShape2d aShape(rSdrObjCustomShape);
+
+        for (int i = 0; i < 2; ++i)
+        {
+            Point aInitialPosition;
+            if (!aShape.GetHandlePosition(i, aInitialPosition))
+                break;
+            m_aControlGroups[i]->set_sensitive(true);
+            css::awt::Point aPosition;
+
+            aPosition.X = SAL_MAX_INT32/2;
+            aPosition.Y = SAL_MAX_INT32/2;
+            aShape.SetHandleControllerPosition(i, aPosition);
+            Point aMaxPosition;
+            aShape.GetHandlePosition(i, aMaxPosition);
+
+            aPosition.X = SAL_MIN_INT32/2;
+            aPosition.Y = SAL_MIN_INT32/2;
+            aShape.SetHandleControllerPosition(i, aPosition);
+            Point aMinPosition;
+            aShape.GetHandlePosition(i, aMinPosition);
+
+            ::tools::Rectangle aLogicRect = aShape.GetLogicRect();
+            aInitialPosition.Move(-aLogicRect.Left(), -aLogicRect.Top());
+            aMaxPosition.Move(-aLogicRect.Left(), -aLogicRect.Top());
+            aMinPosition.Move(-aLogicRect.Left(), -aLogicRect.Top());
+
+            SetMetricValue(*m_aControlX[i], aInitialPosition.X(), ePoolUnit);
+            SetMetricValue(*m_aControlY[i], aInitialPosition.Y(), ePoolUnit);
+
+            if (aMaxPosition.X() == aMinPosition.X())
+                m_aControlGroupX[i]->set_sensitive(false);
+            else
+                m_aControlX[i]->set_range(aMinPosition.X(), aMaxPosition.X(), FieldUnit::MM);
+            if (aMaxPosition.Y() == aMinPosition.Y())
+                m_aControlGroupY[i]->set_sensitive(false);
+            else
+                m_aControlY[i]->set_range(aMinPosition.Y(), aMaxPosition.Y(), FieldUnit::MM);
+        }
+
+        //restore geometry
+        rSdrObjCustomShape.SetMergedItem(aInitialGeometry);
+    }
+
+    for (int i = 0; i < 2; ++i)
+    {
+        m_aControlX[i]->save_value();
+        m_aControlY[i]->save_value();
+    }
+}
+
+std::unique_ptr<SfxTabPage> SvxSlantTabPage::Create(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rOutAttrs)
+{
+    return std::make_unique<SvxSlantTabPage>(pPage, pController, *rOutAttrs);
+}
+
+void SvxSlantTabPage::ActivatePage( const SfxItemSet& rSet )
+{
+    SfxBoolItem const * bPosProtect = nullptr;
+    if(SfxItemState::SET == rSet.GetItemState( GetWhich(SID_ATTR_TRANSFORM_PROTECT_POS  ) , false, reinterpret_cast<SfxPoolItem const **>(&bPosProtect) ))
+    {
+        m_xFlAngle->set_sensitive(!bPosProtect->GetValue());
+    }
+    SfxBoolItem const * bSizeProtect = nullptr;
+    if(SfxItemState::SET == rSet.GetItemState( GetWhich(SID_ATTR_TRANSFORM_PROTECT_SIZE ) , false, reinterpret_cast<SfxPoolItem const **>(&bSizeProtect) ))
+    {
+        m_xFlAngle->set_sensitive(!bSizeProtect->GetValue());
+    }
+
+}
+
+DeactivateRC SvxSlantTabPage::DeactivatePage( SfxItemSet* _pSet )
+{
+    if(_pSet)
+    {
+        FillItemSet(_pSet);
+    }
+
+    return DeactivateRC::LeavePage;
+}
+
+
+/*************************************************************************
+|*
+|*      Dialog for changing position and size of graphic objects
+|*
+\************************************************************************/
+SvxPositionSizeTabPage::SvxPositionSizeTabPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rInAttrs)
+    : SvxTabPage(pPage, pController, "cui/ui/possizetabpage.ui", "PositionAndSize", rInAttrs)
+    , mrOutAttrs(rInAttrs)
+    , mpView(nullptr)
+    , meDlgUnit(FieldUnit::NONE)
+    , mnProtectSizeState(TRISTATE_FALSE)
+    , mbPageDisabled(false)
+    , mbProtectDisabled(false)
+    , mbSizeDisabled(false)
+    , mbAdjustDisabled(true)
+    , mbIgnoreAutoGrowWidth(true)
+    , mbIgnoreAutoGrowHeight(true)
+    , mfOldWidth(0.0)
+    , mfOldHeight(0.0)
+    , m_aCtlPos(this)
+    , m_aCtlSize(this)
+    , m_xFlPosition(m_xBuilder->weld_widget("FL_POSITION"))
+    , m_xMtrPosX(m_xBuilder->weld_metric_spin_button("MTR_FLD_POS_X", FieldUnit::CM))
+    , m_xMtrPosY(m_xBuilder->weld_metric_spin_button("MTR_FLD_POS_Y", FieldUnit::CM))
+    , m_xCtlPos(new weld::CustomWeld(*m_xBuilder, "CTL_POSRECT", m_aCtlPos))
+    , m_xFlSize(m_xBuilder->weld_widget("FL_SIZE"))
+    , m_xFtWidth(m_xBuilder->weld_label("FT_WIDTH"))
+    , m_xMtrWidth(m_xBuilder->weld_metric_spin_button("MTR_FLD_WIDTH", FieldUnit::CM))
+    , m_xFtHeight(m_xBuilder->weld_label("FT_HEIGHT"))
+    , m_xMtrHeight(m_xBuilder->weld_metric_spin_button("MTR_FLD_HEIGHT", FieldUnit::CM))
+    , m_xCbxScale(m_xBuilder->weld_check_button("CBX_SCALE"))
+    , m_xCtlSize(new weld::CustomWeld(*m_xBuilder, "CTL_SIZERECT", m_aCtlSize))
+    , m_xFlProtect(m_xBuilder->weld_widget("FL_PROTECT"))
+    , m_xTsbPosProtect(m_xBuilder->weld_check_button("TSB_POSPROTECT"))
+    , m_xTsbSizeProtect(m_xBuilder->weld_check_button("TSB_SIZEPROTECT"))
+    , m_xFlAdjust(m_xBuilder->weld_widget("FL_ADJUST"))
+    , m_xTsbAutoGrowWidth(m_xBuilder->weld_check_button("TSB_AUTOGROW_WIDTH"))
+    , m_xTsbAutoGrowHeight(m_xBuilder->weld_check_button("TSB_AUTOGROW_HEIGHT"))
+{
+    // this page needs ExchangeSupport
+    SetExchangeSupport();
+
+    // evaluate PoolUnit
+    SfxItemPool* pPool = mrOutAttrs.GetPool();
+    DBG_ASSERT( pPool, "no pool (!)" );
+    mePoolUnit = pPool->GetMetric( SID_ATTR_TRANSFORM_POS_X );
+
+    m_aCtlPos.SetActualRP(RectPoint::LT);
+    m_aCtlSize.SetActualRP(RectPoint::LT);
+    meRP = RectPoint::LT; // see above
+
+    m_xMtrWidth->connect_value_changed( LINK( this, SvxPositionSizeTabPage, ChangeWidthHdl ) );
+    m_xMtrHeight->connect_value_changed( LINK( this, SvxPositionSizeTabPage, ChangeHeightHdl ) );
+    m_xCbxScale->connect_toggled( LINK( this, SvxPositionSizeTabPage, ClickAutoHdl ) );
+
+    m_xFlAdjust->set_sensitive(false);
+
+    // #i2379# disable controls when protected
+    m_xTsbPosProtect->connect_toggled( LINK( this, SvxPositionSizeTabPage, ChangePosProtectHdl ) );
+    m_xTsbSizeProtect->connect_toggled( LINK( this, SvxPositionSizeTabPage, ChangeSizeProtectHdl ) );
+}
+
+SvxPositionSizeTabPage::~SvxPositionSizeTabPage()
+{
+}
+
+void SvxPositionSizeTabPage::Construct()
+{
+    // get range and work area
+    DBG_ASSERT( mpView, "no valid view (!)" );
+    meDlgUnit = GetModuleFieldUnit( GetItemSet() );
+    SetFieldUnit( *m_xMtrPosX, meDlgUnit, true );
+    SetFieldUnit( *m_xMtrPosY, meDlgUnit, true );
+    SetFieldUnit( *m_xMtrWidth, meDlgUnit, true );
+    SetFieldUnit( *m_xMtrHeight, meDlgUnit, true );
+
+    if(FieldUnit::MILE == meDlgUnit || FieldUnit::KM == meDlgUnit)
+    {
+        m_xMtrPosX->set_digits( 3 );
+        m_xMtrPosY->set_digits( 3 );
+        m_xMtrWidth->set_digits( 3 );
+        m_xMtrHeight->set_digits( 3 );
+    }
+
+    { // #i75273#
+        ::tools::Rectangle aTempRect(mpView->GetAllMarkedRect());
+        mpView->GetSdrPageView()->LogicToPagePos(aTempRect);
+        maRange = vcl::unotools::b2DRectangleFromRectangle(aTempRect);
+    }
+
+    { // #i75273#
+        ::tools::Rectangle aTempRect(mpView->GetWorkArea());
+        mpView->GetSdrPageView()->LogicToPagePos(aTempRect);
+        maWorkRange = vcl::unotools::b2DRectangleFromRectangle(aTempRect);
+    }
+
+    // take anchor into account (Writer)
+    const SdrMarkList& rMarkList = mpView->GetMarkedObjectList();
+
+    if(rMarkList.GetMarkCount())
+    {
+        const SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();
+        maAnchor = basegfx::B2DPoint(pObj->GetAnchorPos().X(), pObj->GetAnchorPos().Y());
+
+        if(!maAnchor.equalZero()) // -> Writer
+        {
+            for(size_t i = 1; i < rMarkList.GetMarkCount(); ++i)
+            {
+                pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+
+                if(maAnchor != basegfx::B2DPoint(pObj->GetAnchorPos().X(), pObj->GetAnchorPos().Y()))
+                {
+                    // different anchor positions
+                    m_xMtrPosX->set_text("");
+                    m_xMtrPosY->set_text("");
+                    mbPageDisabled = true;
+                    return;
+                }
+            }
+
+            // translate ranges about anchor
+            maRange = basegfx::B2DRange(maRange.getMinimum() - maAnchor, maRange.getMaximum() - maAnchor);
+            maWorkRange = basegfx::B2DRange(maWorkRange.getMinimum() - maAnchor, maWorkRange.getMaximum() - maAnchor);
+        }
+    }
+
+    // this should happen via SID_ATTR_TRANSFORM_AUTOSIZE
+    if(1 == rMarkList.GetMarkCount())
+    {
+        const SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();
+        const SdrObjKind eKind(static_cast<SdrObjKind>(pObj->GetObjIdentifier()));
+
+        if((pObj->GetObjInventor() == SdrInventor::Default) &&
+            (OBJ_TEXT == eKind || OBJ_TITLETEXT == eKind || OBJ_OUTLINETEXT == eKind) &&
+            pObj->HasText())
+        {
+            mbAdjustDisabled = false;
+
+            m_xFlAdjust->set_sensitive(true);
+
+            m_xTsbAutoGrowWidth->connect_toggled( LINK( this, SvxPositionSizeTabPage, ClickSizeProtectHdl ) );
+            m_xTsbAutoGrowHeight->connect_toggled( LINK( this, SvxPositionSizeTabPage, ClickSizeProtectHdl ) );
+
+            // is used as flag to evaluate if its selectable
+            mbIgnoreAutoGrowWidth = false;
+            mbIgnoreAutoGrowHeight = false;
+        }
+    }
+
+    // take scale into account
+    const Fraction aUIScale(mpView->GetModel()->GetUIScale());
+    TransfrmHelper::ScaleRect( maWorkRange, aUIScale );
+    TransfrmHelper::ScaleRect( maRange, aUIScale );
+
+    // take UI units into account
+    const sal_uInt16 nDigits(m_xMtrPosX->get_digits());
+    TransfrmHelper::ConvertRect( maWorkRange, nDigits, mePoolUnit, meDlgUnit );
+    TransfrmHelper::ConvertRect( maRange, nDigits, mePoolUnit, meDlgUnit );
+
+    SetMinMaxPosition();
+}
+
+
+bool SvxPositionSizeTabPage::FillItemSet( SfxItemSet* rOutAttrs )
+{
+    bool bModified(false);
+
+    if ( m_xMtrWidth->has_focus() )
+    {
+        ChangeWidthHdl( *m_xMtrWidth );
+    }
+
+    if ( m_xMtrHeight->has_focus() )
+    {
+        ChangeHeightHdl( *m_xMtrHeight );
+    }
+
+    if( !mbPageDisabled )
+    {
+        if (m_xMtrPosX->get_value_changed_from_saved() || m_xMtrPosY->get_value_changed_from_saved())
+        {
+            const double fUIScale(double(mpView->GetModel()->GetUIScale()));
+            double fX((GetCoreValue( *m_xMtrPosX, mePoolUnit ) + maAnchor.getX()) * fUIScale);
+            double fY((GetCoreValue( *m_xMtrPosY, mePoolUnit ) + maAnchor.getY()) * fUIScale);
+
+            { // #i75273#
+                ::tools::Rectangle aTempRect(mpView->GetAllMarkedRect());
+                mpView->GetSdrPageView()->LogicToPagePos(aTempRect);
+                maRange = vcl::unotools::b2DRectangleFromRectangle(aTempRect);
+            }
+
+            // #101581# GetTopLeftPosition(...) needs coordinates after UI scaling, in real PagePositions
+            GetTopLeftPosition(fX, fY, maRange);
+
+            rOutAttrs->Put(SfxInt32Item(GetWhich(SID_ATTR_TRANSFORM_POS_X), basegfx::fround(fX)));
+            rOutAttrs->Put(SfxInt32Item(GetWhich(SID_ATTR_TRANSFORM_POS_Y), basegfx::fround(fY)));
+
+            bModified = true;
+        }
+
+        if (m_xTsbPosProtect->get_state_changed_from_saved())
+        {
+            if( m_xTsbPosProtect->get_inconsistent() )
+            {
+                rOutAttrs->InvalidateItem( SID_ATTR_TRANSFORM_PROTECT_POS );
+            }
+            else
+            {
+                rOutAttrs->Put(
+                    SfxBoolItem( GetWhich( SID_ATTR_TRANSFORM_PROTECT_POS ),
+                    m_xTsbPosProtect->get_active() ) );
+            }
+
+            bModified = true;
+        }
+    }
+
+    if (m_xMtrWidth->get_value_changed_from_saved() || m_xMtrHeight->get_value_changed_from_saved())
+    {
+        Fraction aUIScale = mpView->GetModel()->GetUIScale();
+
+        // get Width
+        double nWidth = static_cast<double>(m_xMtrWidth->get_value(FieldUnit::MM_100TH));
+        long lWidth = long(nWidth * static_cast<double>(aUIScale));
+        lWidth = OutputDevice::LogicToLogic( lWidth, MapUnit::Map100thMM, mePoolUnit );
+        lWidth = static_cast<long>(m_xMtrWidth->denormalize( lWidth ));
+
+        // get Height
+        double nHeight = static_cast<double>(m_xMtrHeight->get_value(FieldUnit::MM_100TH));
+        long lHeight = long(nHeight * static_cast<double>(aUIScale));
+        lHeight = OutputDevice::LogicToLogic( lHeight, MapUnit::Map100thMM, mePoolUnit );
+        lHeight = static_cast<long>(m_xMtrHeight->denormalize( lHeight ));
+
+        // put Width & Height to itemset
+        rOutAttrs->Put( SfxUInt32Item( GetWhich( SID_ATTR_TRANSFORM_WIDTH ), static_cast<sal_uInt32>(lWidth) ) );
+        rOutAttrs->Put( SfxUInt32Item( GetWhich( SID_ATTR_TRANSFORM_HEIGHT ), static_cast<sal_uInt32>(lHeight) ) );
+        rOutAttrs->Put( SfxUInt16Item( GetWhich( SID_ATTR_TRANSFORM_SIZE_POINT ), sal::static_int_cast< sal_uInt16 >( meRP ) ) );
+        bModified = true;
+    }
+
+    if (m_xTsbSizeProtect->get_state_changed_from_saved())
+    {
+        if ( m_xTsbSizeProtect->get_inconsistent() )
+            rOutAttrs->InvalidateItem( SID_ATTR_TRANSFORM_PROTECT_SIZE );
+        else
+            rOutAttrs->Put(
+                SfxBoolItem( GetWhich( SID_ATTR_TRANSFORM_PROTECT_SIZE ),
+                m_xTsbSizeProtect->get_active() ) );
+        bModified = true;
+    }
+
+    if (m_xTsbAutoGrowWidth->get_state_changed_from_saved())
+    {
+        if (!mbIgnoreAutoGrowWidth)
+        {
+            if( m_xTsbAutoGrowWidth->get_inconsistent() )
+                rOutAttrs->InvalidateItem( SID_ATTR_TRANSFORM_AUTOWIDTH );
+            else
+                rOutAttrs->Put(
+                    SfxBoolItem( GetWhich( SID_ATTR_TRANSFORM_AUTOWIDTH ),
+                    m_xTsbAutoGrowWidth->get_active() ) );
+        }
+        bModified = true;
+    }
+
+    if (m_xTsbAutoGrowHeight->get_state_changed_from_saved())
+    {
+        if (!mbIgnoreAutoGrowHeight)
+        {
+            if (m_xTsbAutoGrowHeight->get_inconsistent())
+            {
+                rOutAttrs->InvalidateItem( SID_ATTR_TRANSFORM_AUTOHEIGHT );
+            }
+            else
+            {
+                rOutAttrs->Put(
+                    SfxBoolItem( GetWhich( SID_ATTR_TRANSFORM_AUTOHEIGHT ),
+                    m_xTsbAutoGrowHeight->get_active() ) );
+            }
+        }
+        bModified = true;
+    }
+
+    return bModified;
+}
+
+void SvxPositionSizeTabPage::Reset( const SfxItemSet*  )
+{
+    const SfxPoolItem* pItem;
+    const double fUIScale(double(mpView->GetModel()->GetUIScale()));
+
+    if ( !mbPageDisabled )
+    {
+        pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_POS_X );
+        if ( pItem )
+        {
+            const double fTmp((static_cast<const SfxInt32Item*>(pItem)->GetValue() - maAnchor.getX()) / fUIScale);
+            SetMetricValue(*m_xMtrPosX, basegfx::fround(fTmp), mePoolUnit);
+        }
+
+        pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_POS_Y );
+        if ( pItem )
+        {
+            const double fTmp((static_cast<const SfxInt32Item*>(pItem)->GetValue() - maAnchor.getY()) / fUIScale);
+            SetMetricValue(*m_xMtrPosY, basegfx::fround(fTmp), mePoolUnit);
+        }
+
+        pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_PROTECT_POS );
+        if ( pItem )
+        {
+            bool bProtected = static_cast<const SfxBoolItem*>( pItem )->GetValue();
+            m_xTsbPosProtect->set_active(bProtected);
+        }
+        else
+        {
+            m_xTsbPosProtect->set_inconsistent(true);
+        }
+
+        m_xTsbPosProtect->save_state();
+        m_aCtlPos.Reset();
+
+        // #i2379# Disable controls for protected objects
+        ChangePosProtectHdl(*m_xTsbPosProtect);
+    }
+
+    { // #i75273# set width
+        pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_WIDTH );
+        mfOldWidth = std::max( pItem ? static_cast<double>(static_cast<const SfxUInt32Item*>(pItem)->GetValue()) : 0.0, 1.0 );
+        double fTmpWidth((OutputDevice::LogicToLogic(static_cast<sal_Int32>(mfOldWidth), mePoolUnit, MapUnit::Map100thMM)) / fUIScale);
+        if (m_xMtrWidth->get_digits())
+            fTmpWidth *= pow(10.0, m_xMtrWidth->get_digits());
+        m_xMtrWidth->set_value(static_cast<int>(fTmpWidth), FieldUnit::MM_100TH);
+    }
+
+    { // #i75273# set height
+        pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_HEIGHT );
+        mfOldHeight = std::max( pItem ? static_cast<double>(static_cast<const SfxUInt32Item*>(pItem)->GetValue()) : 0.0, 1.0 );
+        double fTmpHeight((OutputDevice::LogicToLogic(static_cast<sal_Int32>(mfOldHeight), mePoolUnit, MapUnit::Map100thMM)) / fUIScale);
+        if (m_xMtrHeight->get_digits())
+            fTmpHeight *= pow(10.0, m_xMtrHeight->get_digits());
+        m_xMtrHeight->set_value(static_cast<int>(fTmpHeight), FieldUnit::MM_100TH);
+    }
+
+    pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_PROTECT_SIZE );
+    if ( pItem )
+    {
+        m_xTsbSizeProtect->set_active(static_cast<const SfxBoolItem*>(pItem)->GetValue());
+    }
+    else
+        m_xTsbSizeProtect->set_inconsistent(true);
+
+    pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_AUTOWIDTH );
+    if ( pItem )
+    {
+        m_xTsbAutoGrowWidth->set_active(static_cast<const SfxBoolItem*>( pItem )->GetValue());
+    }
+    else
+        m_xTsbAutoGrowWidth->set_inconsistent(true);
+
+    pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_AUTOHEIGHT );
+    if ( pItem )
+    {
+        m_xTsbAutoGrowHeight->set_active(static_cast<const SfxBoolItem*>( pItem )->GetValue());
+    }
+    else
+        m_xTsbAutoGrowHeight->set_inconsistent(true);
+
+    // Is matching set?
+    OUString aStr = GetUserData();
+    m_xCbxScale->set_active(aStr.toInt32() != 0);
+
+    m_xMtrPosX->save_value();
+    m_xMtrPosY->save_value();
+    m_xMtrWidth->save_value();
+    m_xMtrHeight->save_value();
+
+    m_xTsbSizeProtect->save_state();
+    m_xTsbAutoGrowWidth->save_state();
+    m_xTsbAutoGrowHeight->save_state();
+    ClickSizeProtectHdl(*m_xTsbAutoGrowHeight);
+
+    // #i2379# Disable controls for protected objects
+    ChangeSizeProtectHdl(*m_xTsbSizeProtect);
+}
+
+std::unique_ptr<SfxTabPage> SvxPositionSizeTabPage::Create(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rOutAttrs)
+{
+    return std::make_unique<SvxPositionSizeTabPage>(pPage, pController, *rOutAttrs);
+}
+
+void SvxPositionSizeTabPage::ActivatePage( const SfxItemSet& rSet )
+{
+    SfxRectangleItem const * pRectItem = nullptr;
+
+    if( SfxItemState::SET == rSet.GetItemState( GetWhich( SID_ATTR_TRANSFORM_INTERN ) , false, reinterpret_cast<SfxPoolItem const **>(&pRectItem) ) )
+    {
+        { // #i75273#
+            const ::tools::Rectangle aTempRect(pRectItem->GetValue());
+            maRange = vcl::unotools::b2DRectangleFromRectangle(aTempRect);
+        }
+
+        SetMinMaxPosition();
+    }
+}
+
+
+DeactivateRC SvxPositionSizeTabPage::DeactivatePage( SfxItemSet* _pSet )
+{
+    if( _pSet )
+    {
+        double fX(static_cast<double>(m_xMtrPosX->get_value(FieldUnit::NONE)));
+        double fY(static_cast<double>(m_xMtrPosY->get_value(FieldUnit::NONE)));
+
+        GetTopLeftPosition(fX, fY, maRange);
+        const ::tools::Rectangle aOutRectangle(
+            basegfx::fround(fX), basegfx::fround(fY),
+            basegfx::fround(fX + maRange.getWidth()), basegfx::fround(fY + maRange.getHeight()));
+        _pSet->Put(SfxRectangleItem(SID_ATTR_TRANSFORM_INTERN, aOutRectangle));
+        _pSet->Put(SfxBoolItem( GetWhich( SID_ATTR_TRANSFORM_PROTECT_POS ),
+            m_xTsbPosProtect->get_state() == TRISTATE_TRUE ));
+        _pSet->Put(SfxBoolItem( GetWhich( SID_ATTR_TRANSFORM_PROTECT_SIZE ),
+            m_xTsbSizeProtect->get_state() == TRISTATE_TRUE ));
+        FillItemSet(_pSet);
+    }
+
+    return DeactivateRC::LeavePage;
+}
+
+
+IMPL_LINK_NOARG(SvxPositionSizeTabPage, ChangePosProtectHdl, weld::ToggleButton&, void)
+{
+    // #106572# Remember user's last choice
+    m_xTsbSizeProtect->set_state(m_xTsbPosProtect->get_state() == TRISTATE_TRUE ?  TRISTATE_TRUE : mnProtectSizeState);
+    UpdateControlStates();
+}
+
+
+void SvxPositionSizeTabPage::UpdateControlStates()
+{
+    const bool bPosProtect =  m_xTsbPosProtect->get_state() == TRISTATE_TRUE;
+    const bool bSizeProtect = m_xTsbSizeProtect->get_state() == TRISTATE_TRUE;
+    const bool bHeightChecked = !mbIgnoreAutoGrowHeight && (m_xTsbAutoGrowHeight->get_active());
+    const bool bWidthChecked = !mbIgnoreAutoGrowWidth && (m_xTsbAutoGrowWidth->get_active());
+
+    m_xFlPosition->set_sensitive(!bPosProtect && !mbPageDisabled);
+
+    m_xTsbPosProtect->set_sensitive( !mbProtectDisabled && !mbPageDisabled );
+
+    m_xFlSize->set_sensitive( !mbSizeDisabled && !bSizeProtect );
+
+    m_xFtWidth->set_sensitive( !mbSizeDisabled && !bSizeProtect && !bWidthChecked );
+    m_xMtrWidth->set_sensitive( !mbSizeDisabled && !bSizeProtect && !bWidthChecked );
+
+    m_xFtHeight->set_sensitive( !mbSizeDisabled && !bSizeProtect && !bHeightChecked );
+    m_xMtrHeight->set_sensitive( !mbSizeDisabled && !bSizeProtect && !bHeightChecked );
+
+    m_xCbxScale->set_sensitive( !mbSizeDisabled && !bSizeProtect && !bHeightChecked && !bWidthChecked );
+    m_xCtlSize->set_sensitive( !mbSizeDisabled && !bSizeProtect && (!bHeightChecked || !bWidthChecked) );
+
+    m_xFlProtect->set_sensitive( !mbProtectDisabled );
+    m_xTsbSizeProtect->set_sensitive( !mbProtectDisabled && !bPosProtect );
+
+    m_xFlAdjust->set_sensitive( !mbSizeDisabled && !bSizeProtect && !mbAdjustDisabled );
+
+    m_aCtlSize.Invalidate();
+    m_aCtlPos.Invalidate();
+}
+
+IMPL_LINK_NOARG(SvxPositionSizeTabPage, ChangeSizeProtectHdl, weld::ToggleButton&, void)
+{
+    if (m_xTsbSizeProtect->get_sensitive())
+    {
+        // #106572# Remember user's last choice
+
+        // Note: this works only as long as the dialog is open.  When
+        // the user closes the dialog, there is no way to remember
+        // whether size was enabled or disabled before pos protect was
+        // clicked. Thus, if pos protect is selected, the dialog is
+        // closed and reopened again, unchecking pos protect will
+        // always uncheck size protect, too. That's life.
+        mnProtectSizeState = m_xTsbSizeProtect->get_state();
+    }
+
+    UpdateControlStates();
+}
+
+void SvxPositionSizeTabPage::SetMinMaxPosition()
+{
+    // position
+    double fLeft(maWorkRange.getMinX());
+    double fTop(maWorkRange.getMinY());
+    double fRight(maWorkRange.getMaxX());
+    double fBottom(maWorkRange.getMaxY());
+
+    switch (m_aCtlPos.GetActualRP())
+    {
+        case RectPoint::LT:
+        {
+            fRight  -= maRange.getWidth();
+            fBottom -= maRange.getHeight();
+            break;
+        }
+        case RectPoint::MT:
+        {
+            fLeft   += maRange.getWidth() / 2.0;
+            fRight  -= maRange.getWidth() / 2.0;
+            fBottom -= maRange.getHeight();
+            break;
+        }
+        case RectPoint::RT:
+        {
+            fLeft   += maRange.getWidth();
+            fBottom -= maRange.getHeight();
+            break;
+        }
+        case RectPoint::LM:
+        {
+            fRight  -= maRange.getWidth();
+            fTop    += maRange.getHeight() / 2.0;
+            fBottom -= maRange.getHeight() / 2.0;
+            break;
+        }
+        case RectPoint::MM:
+        {
+            fLeft   += maRange.getWidth() / 2.0;
+            fRight  -= maRange.getWidth() / 2.0;
+            fTop    += maRange.getHeight() / 2.0;
+            fBottom -= maRange.getHeight() / 2.0;
+            break;
+        }
+        case RectPoint::RM:
+        {
+            fLeft   += maRange.getWidth();
+            fTop    += maRange.getHeight() / 2.0;
+            fBottom -= maRange.getHeight() / 2.0;
+            break;
+        }
+        case RectPoint::LB:
+        {
+            fRight  -= maRange.getWidth();
+            fTop    += maRange.getHeight();
+            break;
+        }
+        case RectPoint::MB:
+        {
+            fLeft   += maRange.getWidth() / 2.0;
+            fRight  -= maRange.getWidth() / 2.0;
+            fTop    += maRange.getHeight();
+            break;
+        }
+        case RectPoint::RB:
+        {
+            fLeft   += maRange.getWidth();
+            fTop    += maRange.getHeight();
+            break;
+        }
+    }
+
+    const double fMaxLong(static_cast<double>(vcl::ConvertValue( LONG_MAX, 0, MapUnit::Map100thMM, meDlgUnit ) - 1));
+    fLeft = std::clamp(fLeft, -fMaxLong, fMaxLong);
+    fRight = std::clamp(fRight, -fMaxLong, fMaxLong);
+    fTop = std::clamp(fTop, - fMaxLong, fMaxLong);
+    fBottom = std::clamp(fBottom, -fMaxLong, fMaxLong);
+
+    // #i75273# normalizing when setting the min/max values was wrong, removed
+    m_xMtrPosX->set_range(basegfx::fround64(fLeft), basegfx::fround64(fRight), FieldUnit::NONE);
+    m_xMtrPosY->set_range(basegfx::fround64(fTop), basegfx::fround64(fBottom), FieldUnit::NONE);
+
+    // size
+    fLeft = maWorkRange.getMinX();
+    fTop = maWorkRange.getMinY();
+    fRight = maWorkRange.getMaxX();
+    fBottom = maWorkRange.getMaxY();
+    double fNewX(0);
+    double fNewY(0);
+
+    switch (m_aCtlSize.GetActualRP())
+    {
+        case RectPoint::LT:
+        {
+            fNewX = maWorkRange.getWidth() - ( maRange.getMinX() - fLeft );
+            fNewY = maWorkRange.getHeight() - ( maRange.getMinY() - fTop );
+            break;
+        }
+        case RectPoint::MT:
+        {
+            fNewX = std::min( maRange.getCenter().getX() - fLeft, fRight - maRange.getCenter().getX() ) * 2.0;
+            fNewY = maWorkRange.getHeight() - ( maRange.getMinY() - fTop );
+            break;
+        }
+        case RectPoint::RT:
+        {
+            fNewX = maWorkRange.getWidth() - ( fRight - maRange.getMaxX() );
+            fNewY = maWorkRange.getHeight() - ( maRange.getMinY() - fTop );
+            break;
+        }
+        case RectPoint::LM:
+        {
+            fNewX = maWorkRange.getWidth() - ( maRange.getMinX() - fLeft );
+            fNewY = std::min( maRange.getCenter().getY() - fTop, fBottom - maRange.getCenter().getY() ) * 2.0;
+            break;
+        }
+        case RectPoint::MM:
+        {
+            const double f1(maRange.getCenter().getX() - fLeft);
+            const double f2(fRight - maRange.getCenter().getX());
+            const double f3(std::min(f1, f2));
+            const double f4(maRange.getCenter().getY() - fTop);
+            const double f5(fBottom - maRange.getCenter().getY());
+            const double f6(std::min(f4, f5));
+
+            fNewX = f3 * 2.0;
+            fNewY = f6 * 3.0;
+
+            break;
+        }
+        case RectPoint::RM:
+        {
+            fNewX = maWorkRange.getWidth() - ( fRight - maRange.getMaxX() );
+            fNewY = std::min( maRange.getCenter().getY() - fTop, fBottom - maRange.getCenter().getY() ) * 2.0;
+            break;
+        }
+        case RectPoint::LB:
+        {
+            fNewX = maWorkRange.getWidth() - ( maRange.getMinX() - fLeft );
+            fNewY = maWorkRange.getHeight() - ( fBottom - maRange.getMaxY() );
+            break;
+        }
+        case RectPoint::MB:
+        {
+            fNewX = std::min( maRange.getCenter().getX() - fLeft, fRight - maRange.getCenter().getX() ) * 2.0;
+            fNewY = maWorkRange.getHeight() - ( maRange.getMaxY() - fBottom );
+            break;
+        }
+        case RectPoint::RB:
+        {
+            fNewX = maWorkRange.getWidth() - ( fRight - maRange.getMaxX() );
+            fNewY = maWorkRange.getHeight() - ( fBottom - maRange.getMaxY() );
+            break;
+        }
+    }
+
+    // #i75273# normalizing when setting the min/max values was wrong, removed
+    m_xMtrWidth->set_max(basegfx::fround64(fNewX), FieldUnit::NONE);
+    m_xMtrHeight->set_max(basegfx::fround64(fNewY), FieldUnit::NONE);
+}
+
+void SvxPositionSizeTabPage::GetTopLeftPosition(double& rfX, double& rfY, const basegfx::B2DRange& rRange)
+{
+    switch (m_aCtlPos.GetActualRP())
+    {
+        case RectPoint::LT:
+        {
+            break;
+        }
+        case RectPoint::MT:
+        {
+            rfX -= rRange.getCenter().getX() - rRange.getMinX();
+            break;
+        }
+        case RectPoint::RT:
+        {
+            rfX -= rRange.getWidth();
+            break;
+        }
+        case RectPoint::LM:
+        {
+            rfY -= rRange.getCenter().getY() - rRange.getMinY();
+            break;
+        }
+        case RectPoint::MM:
+        {
+            rfX -= rRange.getCenter().getX() - rRange.getMinX();
+            rfY -= rRange.getCenter().getY() - rRange.getMinY();
+            break;
+        }
+        case RectPoint::RM:
+        {
+            rfX -= rRange.getWidth();
+            rfY -= rRange.getCenter().getY() - rRange.getMinY();
+            break;
+        }
+        case RectPoint::LB:
+        {
+            rfY -= rRange.getHeight();
+            break;
+        }
+        case RectPoint::MB:
+        {
+            rfX -= rRange.getCenter().getX() - rRange.getMinX();
+            rfY -= rRange.getHeight();
+            break;
+        }
+        case RectPoint::RB:
+        {
+            rfX -= rRange.getWidth();
+            rfY -= rRange.getHeight();
+            break;
+        }
+    }
+}
+
+void SvxPositionSizeTabPage::PointChanged(weld::DrawingArea* pDrawingArea, RectPoint eRP)
+{
+    if (pDrawingArea == m_aCtlPos.GetDrawingArea())
+    {
+        SetMinMaxPosition();
+        switch( eRP )
+        {
+            case RectPoint::LT:
+            {
+                m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FieldUnit::NONE );
+                m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FieldUnit::NONE );
+                break;
+            }
+            case RectPoint::MT:
+            {
+                m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FieldUnit::NONE );
+                m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FieldUnit::NONE );
+                break;
+            }
+            case RectPoint::RT:
+            {
+                m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FieldUnit::NONE );
+                m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FieldUnit::NONE );
+                break;
+            }
+            case RectPoint::LM:
+            {
+                m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FieldUnit::NONE );
+                m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FieldUnit::NONE );
+                break;
+            }
+            case RectPoint::MM:
+            {
+                m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FieldUnit::NONE );
+                m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FieldUnit::NONE );
+                break;
+            }
+            case RectPoint::RM:
+            {
+                m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FieldUnit::NONE );
+                m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FieldUnit::NONE );
+                break;
+            }
+            case RectPoint::LB:
+            {
+                m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FieldUnit::NONE );
+                m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FieldUnit::NONE );
+                break;
+            }
+            case RectPoint::MB:
+            {
+                m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FieldUnit::NONE );
+                m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FieldUnit::NONE );
+                break;
+            }
+            case RectPoint::RB:
+            {
+                m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FieldUnit::NONE );
+                m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FieldUnit::NONE );
+                break;
+            }
+        }
+    }
+    else
+    {
+        meRP = eRP;
+        SetMinMaxPosition();
+    }
+}
+
+void SvxPositionSizeTabPage::DisableResize()
+{
+    mbSizeDisabled = true;
+}
+
+
+void SvxPositionSizeTabPage::DisableProtect()
+{
+    mbProtectDisabled = true;
+}
+
+
+IMPL_LINK_NOARG(SvxPositionSizeTabPage, ChangeWidthHdl, weld::MetricSpinButton&, void)
+{
+    if( !(m_xCbxScale->get_active() && m_xCbxScale->get_sensitive()) )
+        return;
+
+    sal_Int64 nHeight(basegfx::fround64((mfOldHeight * static_cast<double>(m_xMtrWidth->get_value(FieldUnit::NONE))) / mfOldWidth));
+    int nMin, nMax;
+    m_xMtrHeight->get_range(nMin, nMax, FieldUnit::NONE);
+
+    if (nHeight <= nMax)
+    {
+        m_xMtrHeight->set_value(nHeight, FieldUnit::NONE);
+    }
+    else
+    {
+        nHeight = nMax;
+        m_xMtrHeight->set_value(nHeight, FieldUnit::NONE);
+
+        const sal_Int64 nWidth(basegfx::fround64((mfOldWidth * static_cast<double>(nHeight)) / mfOldHeight));
+        m_xMtrWidth->set_value(nWidth, FieldUnit::NONE);
+    }
+}
+
+IMPL_LINK_NOARG(SvxPositionSizeTabPage, ChangeHeightHdl, weld::MetricSpinButton&, void)
+{
+    if( !(m_xCbxScale->get_active() && m_xCbxScale->get_sensitive()) )
+        return;
+
+    sal_Int64 nWidth(basegfx::fround64((mfOldWidth * static_cast<double>(m_xMtrHeight->get_value(FieldUnit::NONE))) / mfOldHeight));
+    int nMin, nMax;
+    m_xMtrWidth->get_range(nMin, nMax, FieldUnit::NONE);
+
+    if (nWidth <= nMax)
+    {
+        m_xMtrWidth->set_value(nWidth, FieldUnit::NONE);
+    }
+    else
+    {
+        nWidth = nMax;
+        m_xMtrWidth->set_value(nWidth, FieldUnit::NONE);
+
+        const sal_Int64 nHeight(basegfx::fround64((mfOldHeight * static_cast<double>(nWidth)) / mfOldWidth));
+        m_xMtrHeight->set_value(nHeight, FieldUnit::NONE);
+    }
+}
+
+IMPL_LINK_NOARG(SvxPositionSizeTabPage, ClickSizeProtectHdl, weld::ToggleButton&, void)
+{
+    UpdateControlStates();
+}
+
+IMPL_LINK_NOARG(SvxPositionSizeTabPage, ClickAutoHdl, weld::ToggleButton&, void)
+{
+    if (m_xCbxScale->get_active())
+    {
+        mfOldWidth  = std::max( static_cast<double>(GetCoreValue( *m_xMtrWidth,  mePoolUnit )), 1.0 );
+        mfOldHeight = std::max( static_cast<double>(GetCoreValue( *m_xMtrHeight, mePoolUnit )), 1.0 );
+    }
+}
+
+void SvxPositionSizeTabPage::FillUserData()
+{
+    // matching is saved in the Ini-file
+    OUString aStr = m_xCbxScale->get_active() ? OUString("1") : OUString("0");
+    SetUserData( aStr );
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */