Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 214 insertions, 0 deletions

diff --git a/include/rtl/ustrbuf.h b/include/rtl/ustrbuf.h
new file mode 100644
index 000000000..9c24724f5
--- /dev/null
+++ b/include/rtl/ustrbuf.h
@@ -0,0 +1,214 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#ifndef INCLUDED_RTL_USTRBUF_H
+#define INCLUDED_RTL_USTRBUF_H
+
+#include "sal/config.h"
+
+#include "rtl/ustring.h"
+#include "sal/saldllapi.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Allocates a new <code>String</code> that contains characters from
+    the character array argument.
+
+    The <code>count</code> argument specifies
+    the length of the array. The initial capacity of the string buffer is
+    <code>16</code> plus the length of the string argument.
+
+    @param  newStr   out parameter, contains the new string. The reference count is 1.
+    @param  value   the initial value of the string.
+    @param  count    the length of value.
+ */
+SAL_DLLPUBLIC void SAL_CALL rtl_uStringbuffer_newFromStr_WithLength(
+                                                      rtl_uString ** newStr,
+                                                      const sal_Unicode * value,
+                                                      sal_Int32 count );
+
+/**
+    Allocates a new <code>String</code> that contains the same sequence of
+    characters as the string argument.
+
+    The initial capacity is the larger of:
+    <ul>
+    <li> The <code>bufferLen</code> argument.
+    <li> The <code>length</code> of the string argument.
+    </ul>
+
+    @param  newStr       out parameter, contains the new string. The reference count is 1.
+    @param  capacity     the initial len of the string buffer.
+    @param  oldStr       the initial value of the string.
+    @return the new capacity of the string buffer
+ */
+SAL_DLLPUBLIC sal_Int32 SAL_CALL rtl_uStringbuffer_newFromStringBuffer(
+                                                          rtl_uString ** newStr,
+                                                          sal_Int32 capacity,
+                                                          rtl_uString * oldStr );
+
+/**
+    Ensures that the capacity of the buffer is at least equal to the
+    specified minimum.
+
+    If the current capacity of this string buffer is less than the
+    argument, then a new internal buffer is allocated with greater
+    capacity. The new capacity is the larger of:
+    <ul>
+    <li>The <code>minimumCapacity</code> argument.
+    <li>Twice the old capacity, plus <code>2</code>.
+    </ul>
+    If the <code>minimumCapacity</code> argument is nonpositive, this
+    method takes no action and simply returns.
+
+    @param[in,out]   This              the String to operate on.
+    @param[in,out]   capacity          in: old capacity, out: new capacity.
+    @param[in]       minimumCapacity   the minimum desired capacity.
+ */
+SAL_DLLPUBLIC void SAL_CALL rtl_uStringbuffer_ensureCapacity(
+                                                rtl_uString ** This,
+                                                sal_Int32* capacity,
+                                                sal_Int32 minimumCapacity);
+
+/**
+    Inserts the string representation of the <code>str</code> array
+    argument into this string buffer.
+
+    The characters of the array argument are inserted into the
+    contents of this string buffer at the position indicated by
+    <code>offset</code>. The length of this string buffer increases by
+    the length of the argument.
+
+    @param   This        The string, on that the operation should take place
+    @param   capacity    the capacity of the string buffer
+    @param   offset      the offset.
+    @param   str         a character array.  Since LibreOffice 4.4, as a special
+                         case, if str is null then the len added characters are
+                         left uninitialized.
+    @param   len         the number of characters to append.
+ */
+SAL_DLLPUBLIC void SAL_CALL rtl_uStringbuffer_insert(
+                                        /*inout*/rtl_uString ** This,
+                                        /*inout*/sal_Int32 * capacity,
+                                        sal_Int32 offset,
+                                        const sal_Unicode * str,
+                                        sal_Int32 len);
+
+/**
+   Inserts a single UTF-32 character into this string buffer.
+
+   <p>The single UTF-32 character will be represented within the string buffer
+   as either one or two UTF-16 code units.</p>
+
+   @param pThis the string buffer on which the operation is performed
+
+   @param capacity the capacity of the string buffer
+
+   @param offset the offset into this string buffer (from zero to the length
+   of this string buffer, inclusive)
+
+   @param c a well-formed UTF-32 code unit (that is, a value in the range
+   <code>0</code>&ndash;<code>0x10FFFF</code>, but excluding
+   <code>0xD800</code>&ndash;<code>0xDFFF</code>)
+ */
+SAL_DLLPUBLIC void SAL_CALL rtl_uStringbuffer_insertUtf32(
+    rtl_uString ** pThis, sal_Int32 * capacity, sal_Int32 offset, sal_uInt32 c)
+    SAL_THROW_EXTERN_C();
+
+/**
+    Inserts the 8-Bit ASCII string representation of the <code>str</code>
+    array argument into this string buffer.
+
+    Since this function is optimized
+    for performance, the ASCII character values are not converted in any way.
+    The caller has to make sure that all ASCII characters are in the allowed
+    range between 0 and 127.
+    <p>
+    The characters of the array argument are inserted into the
+    contents of this string buffer at the position indicated by
+    <code>offset</code>. The length of this string buffer increases by
+    the length of the argument.
+
+    @param   This        The string, on that the operation should take place
+    @param   capacity    the capacity of the string buffer
+    @param   offset      the offset.
+    @param   str         a character array.
+    @param   len         the number of characters to append.
+ */
+SAL_DLLPUBLIC void SAL_CALL rtl_uStringbuffer_insert_ascii(
+                                                /*inout*/rtl_uString ** This,
+                                                /*inout*/sal_Int32 * capacity,
+                                                sal_Int32 offset,
+                                                const sal_Char * str,
+                                                sal_Int32 len);
+
+/**
+    Removes the characters in a substring of this sequence.
+
+    The substring begins at the specified <code>start</code> and
+    is <code>len</code> characters long.
+
+    start must be >= 0 && <= This->length
+
+    @param[in,out]  This    The String to operate on.
+    @param[in]      start   The beginning index, inclusive
+    @param[in]      len     The substring length
+ */
+SAL_DLLPUBLIC void SAL_CALL rtl_uStringbuffer_remove(
+                                       rtl_uString ** This,
+                                       sal_Int32 start,
+                                       sal_Int32 len );
+
+/**
+    Returns an immutable rtl_uString object, while clearing the string buffer.
+
+    This method is primarily used to allow these completed
+    string allocation events to be traced.
+
+    @param  ppThis      The string, on that the operation should take place
+    @param  nCapacity   pointer to the capacity of the string buffer
+
+    @since LibreOffice 3.6
+ */
+SAL_DLLPUBLIC rtl_uString * SAL_CALL rtl_uStringBuffer_makeStringAndClear(
+                                        /*inout*/ rtl_uString ** ppThis,
+                                        sal_Int32 *nCapacity ) SAL_RETURNS_NONNULL;
+
+/**
+    References and returns an immutable rtl_uString object, from a mutable
+    string-buffer object.
+
+    This method is primarily used to allow legacy 'String' class
+    conversions to OUString to be accurately traced.
+
+    @param  pThis      The string, on that the operation should take place
+
+    @since LibreOffice 3.6
+ */
+SAL_DLLPUBLIC rtl_uString * SAL_CALL rtl_uStringBuffer_refReturn( rtl_uString *pThis );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // INCLUDED_RTL_USTRBUF_H
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */