Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 486 insertions, 0 deletions

diff --git a/include/vcl/pdfextoutdevdata.hxx b/include/vcl/pdfextoutdevdata.hxx
new file mode 100644
index 000000000..ea5466b86
--- /dev/null
+++ b/include/vcl/pdfextoutdevdata.hxx
@@ -0,0 +1,486 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#ifndef INCLUDED_VCL_PDFEXTOUTDEVDATA_HXX
+#define INCLUDED_VCL_PDFEXTOUTDEVDATA_HXX
+
+#include <vcl/dllapi.h>
+
+#include <vcl/pdfwriter.hxx>
+#include <vcl/extoutdevdata.hxx>
+#include <vector>
+#include <memory>
+
+class Graphic;
+class GDIMetaFile;
+
+namespace vcl
+{
+
+/*
+    A PDFExtOutDevBookmarkEntry is being created by the EditEngine if
+    a bookmark URL has been parsed. The Application is requested to take
+    care of each bookmark entry by emptying out the bookmark vector.
+*/
+struct PDFExtOutDevBookmarkEntry
+{
+    /** ID of the link pointing to the bookmark, or -1 if the entry denotes a destination instead of a link.
+    */
+    sal_Int32       nLinkId;
+
+    /** ID of the named destination denoted by the bookmark, or -1 if the entry denotes a link instead of a named destination.
+    */
+    sal_Int32       nDestId;
+
+    /** link target name, respectively destination name
+    */
+    OUString   aBookmark;
+
+    PDFExtOutDevBookmarkEntry()
+        :nLinkId( -1 )
+        ,nDestId( -1 )
+        ,aBookmark()
+    {
+    }
+};
+
+/*
+ Class that is being set at the OutputDevice allowing the
+ application to send enhanced PDF commands like CreateLink
+*/
+struct PageSyncData;
+struct GlobalSyncData;
+class VCL_DLLPUBLIC PDFExtOutDevData : public ExtOutDevData
+{
+
+    const OutputDevice&         mrOutDev;
+
+    bool                        mbTaggedPDF;
+    bool                        mbExportNotes;
+    bool                        mbExportNotesPages;
+    bool                        mbTransitionEffects;
+    bool                        mbUseLosslessCompression;
+    bool                        mbReduceImageResolution;
+    bool                        mbExportFormFields;
+    bool                        mbExportBookmarks;
+    bool                        mbExportHiddenSlides;
+    bool                        mbSinglePageSheets;
+    bool                        mbExportNDests; //i56629
+    sal_Int32                   mnPage;
+    sal_Int32                   mnCompressionQuality;
+    css::lang::Locale           maDocLocale;
+
+    std::unique_ptr<PageSyncData> mpPageSyncData;
+    std::unique_ptr<GlobalSyncData> mpGlobalSyncData;
+
+    std::vector< PDFExtOutDevBookmarkEntry > maBookmarks;
+    std::vector<OUString> maChapterNames;
+
+public:
+
+    PDFExtOutDevData( const OutputDevice& rOutDev );
+    virtual ~PDFExtOutDevData() override;
+
+    bool PlaySyncPageAct( PDFWriter& rWriter, sal_uInt32& rCurGDIMtfAction, const GDIMetaFile& rMtf );
+    void ResetSyncData();
+
+    void PlayGlobalActions( PDFWriter& rWriter );
+
+    bool    GetIsExportNotes() const { return mbExportNotes;}
+    void        SetIsExportNotes( const bool bExportNotes );
+
+    bool    GetIsExportNotesPages() const { return mbExportNotesPages;}
+    void        SetIsExportNotesPages( const bool bExportNotesPages );
+
+    bool    GetIsExportTaggedPDF() const { return mbTaggedPDF;}
+    void        SetIsExportTaggedPDF( const bool bTaggedPDF );
+
+    bool    GetIsExportTransitionEffects() const { return mbTransitionEffects;}
+    void        SetIsExportTransitionEffects( const bool bTransitionalEffects );
+
+    bool    GetIsExportFormFields() const { return mbExportFormFields;}
+    void        SetIsExportFormFields( const bool bExportFormFields );
+
+    bool    GetIsExportBookmarks() const { return mbExportBookmarks;}
+    void        SetIsExportBookmarks( const bool bExportBookmarks );
+
+    bool    GetIsExportHiddenSlides() const { return mbExportHiddenSlides;}
+    void        SetIsExportHiddenSlides( const bool bExportHiddenSlides );
+
+    void        SetIsSinglePageSheets( const bool bSinglePageSheets );
+
+    bool    GetIsExportNamedDestinations() const { return mbExportNDests;} //i56629
+    void        SetIsExportNamedDestinations( const bool bExportNDests ); //i56629
+
+    // PageNumber, Compression is being set by the PDFExport
+    sal_Int32   GetCurrentPageNumber() const { return mnPage;}
+    void        SetCurrentPageNumber( const sal_Int32 nPage );
+
+    bool        GetIsLosslessCompression() const { return mbUseLosslessCompression;}
+    void        SetIsLosslessCompression( const bool bLosslessCompression );
+
+    void        SetCompressionQuality( const sal_Int32 nQuality );
+
+    bool        GetIsReduceImageResolution() const { return mbReduceImageResolution;}
+    void        SetIsReduceImageResolution( const bool bReduceImageResolution );
+
+    const css::lang::Locale& GetDocumentLocale() const { return maDocLocale;}
+    void        SetDocumentLocale( const css::lang::Locale& rLoc );
+
+    std::vector< PDFExtOutDevBookmarkEntry >& GetBookmarks() { return maBookmarks;}
+    const std::vector<OUString>& GetChapterNames() const { return maChapterNames; }
+
+    const Graphic& GetCurrentGraphic() const;
+
+    /** Start a new group of render output
+
+        Use this method to group render output.
+     */
+    void        BeginGroup();
+
+    /** End render output
+
+        This method ends grouped render output, that can be
+        represented by a GfxLink. This is typically used for
+        external graphic files, such as JPEGs, EPS files etc.
+        The BeginGroup/EndGroup calls must exactly enclose the
+        relevant OutputDevice calls issued to render the
+        graphic the normal way.
+
+        @param rGraphic
+        The link to the original graphic
+
+        @param nTransparency
+        Eight bit transparency value, with 0 denoting full opacity,
+        and 255 full transparency.
+
+        @param rOutputRect
+        The output rectangle of the graphic.
+
+        @param rVisibleOutputRect
+        The visible part of the output. This might be less than
+        rOutputRect, e.g. for cropped graphics.
+     */
+    void        EndGroup( const Graphic&    rGraphic,
+                          sal_uInt8         nTransparency,
+                          const tools::Rectangle&  rOutputRect,
+                          const tools::Rectangle&  rVisibleOutputRect );
+
+    /// Detect if stream is compressed enough to avoid de-compress / scale & re-compress
+    bool        HasAdequateCompression( const Graphic &rGraphic,
+                                        const tools::Rectangle &rOutputRect,
+                                        const tools::Rectangle &rVisibleOutputRect ) const;
+
+//--->i56629
+    /** Create a new named destination to be used in a link to this document from another PDF document
+ (see PDF spec 1.4, 8.2.1)
+
+    @param sDestName
+    the name this destination will be addressed with from others PDF document
+
+    @param rRect
+    target rectangle on page to be displayed if dest is jumped to
+
+    @param nPageNr
+    number of page the dest is on (as returned by NewPage)
+    or -1 in which case the current page is used
+
+    @returns
+    the destination id (to be used in SetLinkDest) or
+    -1 if page id does not exist
+    */
+    sal_Int32 CreateNamedDest( const OUString& sDestName,  const tools::Rectangle& rRect, sal_Int32 nPageNr = -1 );
+
+    /** registers a destination for which a destination ID needs to be known immediately, instead of later on setting it via
+        SetLinkDest.
+
+        This is used in contexts where a destination is referenced by means other than a link.
+
+        Later in the export process, a call to DescribeRegisteredDest must be made, providing the information about
+        the destination.
+
+        @return
+            the unique Id of the destination
+    */
+    sal_Int32   RegisterDest();
+
+    /** provides detailed information about a destination range which previously has been registered using RegisterDest.
+    */
+    void        DescribeRegisteredDest( sal_Int32 nDestId, const tools::Rectangle& rRect, sal_Int32 nPageNr, PDFWriter::DestAreaType eType = PDFWriter::DestAreaType::XYZ );
+
+//<---i56629
+
+    /** Create a new destination to be used in a link
+
+    @param rRect
+    target rectangle on page to be displayed if dest is jumped to
+
+    @param nPageNr
+    number of page the dest is on (as returned by NewPage)
+    or -1 in which case the current page is used
+
+    @param eType
+    what dest type to use
+
+    @returns
+    the destination id (to be used in SetLinkDest) or
+    -1 if page id does not exist
+    */
+    sal_Int32 CreateDest( const tools::Rectangle& rRect, sal_Int32 nPageNr = -1, PDFWriter::DestAreaType eType = PDFWriter::DestAreaType::XYZ );
+    /** Create a new link on a page
+
+    @param rRect
+    active rectangle of the link (that is the area that has to be
+    hit to activate the link)
+
+    @param nPageNr
+    number of page the link is on (as returned by NewPage)
+    or -1 in which case the current page is used
+
+    @returns
+    the link id (to be used in SetLinkDest, SetLinkURL) or
+    -1 if page id does not exist
+    */
+    sal_Int32 CreateLink( const tools::Rectangle& rRect, sal_Int32 nPageNr = -1 );
+
+    /// Create a Screen annotation.
+    sal_Int32 CreateScreen(const tools::Rectangle& rRect, sal_Int32 nPageNr);
+
+    /** Set the destination for a link
+        <p>will change a URL type link to a dest link if necessary</p>
+
+        @param nLinkId
+        the link to be changed
+
+        @param nDestId
+        the dest the link shall point to
+    */
+    void SetLinkDest( sal_Int32 nLinkId, sal_Int32 nDestId );
+    /** Set the URL for a link
+        <p>will change a dest type link to a URL type link if necessary</p>
+        @param nLinkId
+        the link to be changed
+
+        @param rURL
+        the URL the link shall point to.
+        there will be no error checking or any kind of
+        conversion done to this parameter execept this:
+        it will be output as 7bit Ascii. The URL
+        will appear literally in the PDF file produced
+    */
+    void SetLinkURL( sal_Int32 nLinkId, const OUString& rURL );
+
+    /// Set URL for a linked Screen annotation.
+    void SetScreenURL(sal_Int32 nScreenId, const OUString& rURL);
+    /// Set URL for an embedded Screen annotation.
+    void SetScreenStream(sal_Int32 nScreenId, const OUString& rURL);
+
+    /** Create a new outline item
+
+        @param nParent
+        declares the parent of the new item in the outline hierarchy.
+        An invalid value will result in a new toplevel item.
+
+        @param rText
+        sets the title text of the item
+
+        @param nDestID
+        declares which Dest (created with CreateDest) the outline item
+        will point to
+
+        @returns
+        the outline item id of the new item
+    */
+    sal_Int32 CreateOutlineItem( sal_Int32 nParent, const OUString& rText, sal_Int32 nDestID );
+
+    /** Create a new note on a page
+
+    @param rRect
+    active rectangle of the note (that is the area that has to be
+    hit to popup the annotation)
+
+    @param rNote
+    specifies the contents of the note
+
+    @param nPageNr
+    number of page the note is on (as returned by NewPage)
+    or -1 in which case the current page is used
+    */
+    void CreateNote( const tools::Rectangle& rRect, const PDFNote& rNote, sal_Int32 nPageNr = -1 );
+
+    /** begin a new logical structure element
+
+    BeginStructureElement/EndStructureElement calls build the logical structure
+    of the PDF - the basis for tagged PDF. Structural elements are implemented
+    using marked content tags. Each structural element can contain sub elements
+    (e.g. a section can contain a heading and a paragraph). The structure hierarchy
+    is build automatically from the Begin/EndStructureElement calls.
+
+    A structural element need not be contained on one page; e.g. paragraphs often
+    run from one page to the next. In this case the corresponding EndStructureElement
+    must be called while drawing the next page.
+
+    BeginStructureElement and EndStructureElement must be called only after
+    PDFWriter::NewPage has been called and before
+    PDFWriter::Emit gets called. The current page
+    number is an implicit context parameter for Begin/EndStructureElement.
+
+    For pagination artifacts that are not part of the logical structure
+    of the document (like header, footer or page number) the special
+    StructElement NonStructElement exists. To place content
+    outside of the structure tree simply call
+    BeginStructureElement( NonStructElement ) then draw your
+    content and then call EndStructureElement(). Any children
+    of a NonStructElement will not be part of the structure as well.
+
+    @param eType
+    denotes what kind of element to begin (e.g. a heading or paragraph)
+
+    @param rAlias
+    the specified alias will be used as structure tag. Also an entry in the PDF's
+    role map will be created mapping alias to regular structure type.
+
+    @returns
+    the id of the newly created structural element
+     */
+     sal_Int32 BeginStructureElement( PDFWriter::StructElement eType, const OUString& rAlias = OUString() );
+    /** end a logical structure element
+
+    @see BeginStructureElement
+     */
+    void EndStructureElement();
+    /** set the current structure element
+
+    <p>
+    For different purposes it may be useful to paint a structure element's
+    content discontinuously. In that case an already existing structure element
+    can be appended to by using SetCurrentStructureElement. The
+    referenced structure element becomes the current structure element with
+    all consequences: all following structure elements are appended as children
+    of the current element.
+    </p>
+
+    @param nElement
+    the id of the new current structure element
+
+    @returns
+    True if the current structure element could be set successfully
+    False if the current structure element could not be changed
+    (e.g. if the passed element id is invalid)
+     */
+    bool SetCurrentStructureElement( sal_Int32 nElement );
+    /** get the current structure element id
+
+    @returns
+    the id of the current structure element
+    */
+    sal_Int32 GetCurrentStructureElement() const;
+
+    /** set a structure attribute on the current structural element
+
+    SetStructureAttribute sets an attribute of the current structural element to a
+    new value. A consistency check is performed before actually setting the value;
+    if the check fails, the function returns False and the attribute remains
+    unchanged.
+
+    @param eAttr
+    denotes what attribute to change
+
+    @param eVal
+    the value to set the attribute to
+     */
+    void SetStructureAttribute( PDFWriter::StructAttribute eAttr, PDFWriter::StructAttributeValue eVal );
+    /** set a structure attribute on the current structural element
+
+    SetStructureAttributeNumerical sets an attribute of the current structural element
+    to a new numerical value. A consistency check is performed before actually setting
+    the value; if the check fails, the function returns False and the attribute
+    remains unchanged.
+
+    @param eAttr
+    denotes what attribute to change
+
+    @param nValue
+    the value to set the attribute to
+     */
+    void SetStructureAttributeNumerical( PDFWriter::StructAttribute eAttr, sal_Int32 nValue );
+    /** set the bounding box of a structural element
+
+    SetStructureBoundingBox sets the BBox attribute to a new value. Since the BBox
+    attribute can only be applied to Table, Figure,
+    Form and Formula elements, a call of this function
+    for other element types will be ignored and the BBox attribute not be set.
+
+    @param rRect
+    the new bounding box for the structural element
+     */
+    void SetStructureBoundingBox( const tools::Rectangle& rRect );
+
+    /** set the ActualText attribute of a structural element
+
+    ActualText contains the Unicode text without layout artifacts that is shown by
+    a structural element. For example if a line is ended prematurely with a break in
+    a word and continued on the next line (e.g. "happen-<newline>stance") the
+    corresponding ActualText would contain the unbroken line (e.g. "happenstance").
+
+    @param rText
+    contains the complete logical text the structural element displays.
+     */
+    void SetActualText( const OUString& rText );
+
+    /** set the Alt attribute of a strutural element
+
+    Alt is s replacement text describing the contents of a structural element. This
+    is mainly used by accessibility applications; e.g. a screen reader would read
+    the Alt replacement text for an image to a visually impaired user.
+
+    @param rText
+    contains the replacement text for the structural element
+    */
+    void SetAlternateText( const OUString& rText );
+
+    /** Sets the transitional effect to be applied when the current page gets shown.
+
+    @param eType
+    the kind of effect to be used; use Regular to disable transitional effects
+    for this page
+
+    @param nMilliSec
+    the duration of the transitional effect in milliseconds;
+    set 0 to disable transitional effects
+    */
+    void SetPageTransition( PDFWriter::PageTransition eType, sal_uInt32 nMilliSec );
+
+    /** create a new form control
+
+    This function creates a new form control in the PDF and sets its various
+    properties. Do not pass an actual AnyWidget as rControlType
+    will be cast to the type described by the type member.
+
+    @param rControlType
+    a descendant of AnyWidget determining the control's properties
+     */
+    void    CreateControl( const PDFWriter::AnyWidget& rControlType );
+};
+
+}
+
+#endif
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */