Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 112 insertions, 0 deletions

diff --git a/sc/inc/scerrors.hrc b/sc/inc/scerrors.hrc
new file mode 100644
index 000000000..e585b1147
--- /dev/null
+++ b/sc/inc/scerrors.hrc
@@ -0,0 +1,112 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#ifndef INCLUDED_SC_INC_SCERRORS_HRC
+#define INCLUDED_SC_INC_SCERRORS_HRC
+
+#define NC_(Context, String) reinterpret_cast<char const *>(Context "\004" u8##String)
+
+#include <svtools/ehdl.hxx>
+#include "scerrors.hxx"
+
+const ErrMsgCode RID_ERRHDLSC[] =
+{
+    // ERRORS -----------------------------------------------------
+    { NC_("RID_ERRHDLSC", "Impossible to connect to the file.") ,
+      SCERR_IMPORT_CONNECT },
+    { NC_("RID_ERRHDLSC", "File could not be opened.") ,
+      SCERR_IMPORT_OPEN },
+    { NC_("RID_ERRHDLSC", "An unknown error has occurred.") ,
+      SCERR_IMPORT_UNKNOWN },
+    { NC_("RID_ERRHDLSC", "Not enough memory while importing.") ,
+      SCERR_IMPORT_OUTOFMEM },
+    { NC_("RID_ERRHDLSC", "Unknown Lotus1-2-3 file format.") ,
+      SCERR_IMPORT_UNKNOWN_WK },
+    { NC_("RID_ERRHDLSC", "Error in file structure while importing.") ,
+      SCERR_IMPORT_FORMAT },
+    { NC_("RID_ERRHDLSC", "There is no filter available for this file type.") ,
+      SCERR_IMPORT_NI },
+    { NC_("RID_ERRHDLSC", "Unknown or unsupported Excel file format.") ,
+      SCERR_IMPORT_UNKNOWN_BIFF },
+    { NC_("RID_ERRHDLSC", "Excel file format not yet implemented.") ,
+      SCERR_IMPORT_NI_BIFF },
+    { NC_("RID_ERRHDLSC", "This file is password-protected.") ,
+      SCERR_IMPORT_FILEPASSWD },
+    { NC_("RID_ERRHDLSC", "Internal import error.") ,
+      SCERR_IMPORT_INTERNAL },
+    { NC_("RID_ERRHDLSC", "The file contains data after row 8192 and therefore can not be read.") ,
+      SCERR_IMPORT_8K_LIMIT },
+    { NC_("RID_ERRHDLSC", "Format error discovered in the file in sub-document $(ARG1) at $(ARG2)(row,col)."),
+      SCERR_IMPORT_FILE_ROWCOL },
+    { NC_("RID_ERRHDLSC", "File format error found at $(ARG1)(row,col).") ,
+      SCERR_IMPORT_FORMAT_ROWCOL },
+
+    // Export ----------------------------------------------------
+    { NC_("RID_ERRHDLSC", "Connection to the file could not be established.") ,
+      SCERR_EXPORT_CONNECT },
+    { NC_("RID_ERRHDLSC", "Data could not be written.") ,
+      SCERR_EXPORT_DATA },
+    { NC_("RID_ERRHDLSC", "$(ARG1)") ,
+      SCERR_EXPORT_SQLEXCEPTION },
+    { NC_("RID_ERRHDLSC", "Cell $(ARG1) contains characters that are not representable in the selected target character set \"$(ARG2)\".") ,
+      SCERR_EXPORT_ENCODING },
+    { NC_("RID_ERRHDLSC", "Cell $(ARG1) contains a string that is longer in the selected target character set \"$(ARG2)\" than the given field width.") ,
+      SCERR_EXPORT_FIELDWIDTH },
+
+    // WARNINGS ---------------------------------------------------
+    { NC_("RID_ERRHDLSC", "Only the active sheet was saved.") ,
+      SCWARN_EXPORT_ASCII },
+    { NC_("RID_ERRHDLSC", "The maximum number of rows has been exceeded. Excess rows were not imported!") ,
+      SCWARN_IMPORT_RANGE_OVERFLOW },
+    { NC_("RID_ERRHDLSC", "The data could not be loaded completely because the maximum number of rows per sheet was exceeded.") ,
+      SCWARN_IMPORT_ROW_OVERFLOW },
+    { NC_("RID_ERRHDLSC", "The data could not be loaded completely because the maximum number of columns per sheet was exceeded.") ,
+      SCWARN_IMPORT_COLUMN_OVERFLOW },
+    { NC_("RID_ERRHDLSC", "Not all sheets have been loaded because the maximum number of sheets was exceeded.\n\nPlease be warned that re-saving this document will permanently delete those sheets that have not been loaded!") ,
+      SCWARN_IMPORT_SHEET_OVERFLOW },
+    { NC_("RID_ERRHDLSC", "The data could not be loaded completely because the maximum number of characters per cell was exceeded.") ,
+      SCWARN_IMPORT_CELL_OVERFLOW },
+    { NC_("RID_ERRHDLSC", "Corresponding FM3-File could not be opened.") ,
+      SCWARN_IMPORT_OPEN_FM3 },
+    { NC_("RID_ERRHDLSC", "Error in file structure of corresponding FM3-File.") ,
+      SCWARN_IMPORT_WRONG_FM3 },
+    { NC_("RID_ERRHDLSC", "Document too complex for automatic calculation. Press F9 to recalculate.") ,
+      SCWARN_CORE_HARD_RECALC },
+    { NC_("RID_ERRHDLSC", "The document contains more rows than supported in the selected format.\nAdditional rows were not saved.") ,
+      SCWARN_EXPORT_MAXROW },
+    { NC_("RID_ERRHDLSC", "The document contains more columns than supported in the selected format.\nAdditional columns were not saved.") ,
+      SCWARN_EXPORT_MAXCOL },
+    { NC_("RID_ERRHDLSC", "The document contains more sheets than supported in the selected format.\nAdditional sheets were not saved.") ,
+      SCWARN_EXPORT_MAXTAB },
+    { NC_("RID_ERRHDLSC", "The document contains information not recognized by this program version.\nResaving the document will delete this information!") ,
+      SCWARN_IMPORT_INFOLOST },
+    { NC_("RID_ERRHDLSC", "Not all cell contents could be saved in the specified format.") ,
+      SCWARN_EXPORT_DATALOST },
+    { NC_("RID_ERRHDLSC", "The following characters could not be converted to the selected character set\nand were written as &#1234; surrogates:\n\n$(ARG1)"),
+      SCWARN_EXPORT_NONCONVERTIBLE_CHARS },
+    { NC_("RID_ERRHDLSC", "Format error discovered in the file in sub-document $(ARG1) at $(ARG2)(row,col)."),
+      SCWARN_IMPORT_FILE_ROWCOL },
+    { NC_("RID_ERRHDLSC", "Not all attributes could be read.") ,
+      SCWARN_IMPORT_FEATURES_LOST },
+    { nullptr, ERRCODE_NONE }
+};
+
+#endif
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */