Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 227 insertions, 0 deletions

diff --git a/solenv/gbuild/Package.mk b/solenv/gbuild/Package.mk
new file mode 100644
index 000000000..90e22806c
--- /dev/null
+++ b/solenv/gbuild/Package.mk
@@ -0,0 +1,227 @@
+# -*- Mode: makefile-gmake; tab-width: 4; indent-tabs-mode: t -*-
+#
+# This file is part of the LibreOffice project.
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+#
+# This file incorporates work covered by the following license notice:
+#
+#   Licensed to the Apache Software Foundation (ASF) under one or more
+#   contributor license agreements. See the NOTICE file distributed
+#   with this work for additional information regarding copyright
+#   ownership. The ASF licenses this file to you under the Apache
+#   License, Version 2.0 (the "License"); you may not use this file
+#   except in compliance with the License. You may obtain a copy of
+#   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+#
+
+
+# PackagePart class
+
+# a pattern rule with multiple targets is actually executed only once for each
+# match, so define only pattern rules with one target here
+# the .dir is for make 3.81, which ignores trailing /
+define gb_PackagePart__rule
+$(1)/.dir :
+	$$(if $$(wildcard $$(dir $$@)),,mkdir -p $$(dir $$@))
+$(1)/%/.dir :
+	$$(if $$(wildcard $$(dir $$@)),,mkdir -p $$(dir $$@))
+$(1)/% :
+	$$(call gb_Deliver_deliver,$$<,$$@)
+endef
+
+$(foreach destination,$(call gb_PackagePart_get_destinations),$(eval \
+  $(call gb_PackagePart__rule,$(destination))))
+
+# Deliver one file to the output dir.
+#
+# gb_PackagePart_PackagePart destfile source prep-target outdir
+define gb_PackagePart_PackagePart
+$(4)/$(1) : $(2) | $(dir $(4)/$(1)).dir
+$(2) :| $(3)
+
+$(if $(gb_Package_PRESTAGEDIR),\
+	$(if $(wildcard $(gb_Package_PRESTAGEDIR)/$(1)),\
+		$(call gb_Deliver_add_deliverable,$(4)/$(1),$(gb_Package_PRESTAGEDIR)/$(1),$(3)),\
+		$(call gb_Deliver_add_deliverable,$(4)/$(1),$(2),$(3)) \
+	),\
+	$(call gb_Deliver_add_deliverable,$(4)/$(1),$(2),$(3)) \
+)
+
+endef
+
+
+# Package class
+
+$(dir $(call gb_Package_get_target,%)).dir :
+	$(if $(wildcard $(dir $@)),,mkdir -p $(dir $@))
+
+$(dir $(call gb_Package_get_target,%))%/.dir :
+	$(if $(wildcard $(dir $@)),,mkdir -p $(dir $@))
+
+.PHONY : $(call gb_Package_get_clean_target,%)
+$(call gb_Package_get_clean_target,%) :
+	$(call gb_Output_announce,$*,$(false),PKG,2)
+	RESPONSEFILE=$(call var2file,$(shell $(gb_MKTEMP)),500,$(FILES)) \
+	&& cat $${RESPONSEFILE} | $(if $(filter WNT,$(OS)),env -i PATH="$$PATH") xargs $(if $(filter MACOSX,$(OS_FOR_BUILD)),-n 1000) rm -fr \
+	&& rm -f $${RESPONSEFILE}
+
+$(call gb_Package_get_preparation_target,%) :
+	mkdir -p $(dir $@) && touch $@
+
+# NOTE: It is possible that a file has been added to the package more
+# than once, so we must drop the duplicates, or Windows installer will
+# be unhappy.
+# TODO: this is only for convenience for impl. of gbuild classes. There
+# should be check that it does not happen in "normal" use, i.e., in
+# Package_foo makefiles.
+$(call gb_Package_get_target,%) :
+	$(call gb_Output_announce,$*,$(true),PKG,2)
+	$(call gb_Trace_StartRange,$*,PKG)
+	$(if $(PACKAGE_DEFINED),,$(call gb_Output_error,Something depends on package $* which does not exist.))
+	rm -f $@ && \
+	mv $(call var2file,$@.tmp,100,$(sort $(FILES))) $@
+	$(call gb_Trace_EndRange,$*,PKG)
+
+# for other targets that want to create Packages, does not register at Module
+define gb_Package_Package_internal
+gb_Package_SOURCEDIR_$(1) := $(2)
+gb_Package_OUTDIR_$(1) := $(INSTROOT)
+$(call gb_Package_get_target,$(1)) : PACKAGE_DEFINED := $(true)
+$(call gb_Package_get_target,$(1)) : FILES :=
+$(call gb_Package_get_clean_target,$(1)) : FILES := $(call gb_Package_get_target,$(1)) $(call gb_Package_get_preparation_target,$(1))
+$(call gb_Package_get_target,$(1)) : $(call gb_Package_get_preparation_target,$(1))
+$(call gb_Package_get_target,$(1)) : $(gb_Module_CURRENTMAKEFILE)
+$(call gb_Package_get_target,$(1)) :| $(dir $(call gb_Package_get_target,$(1))).dir
+
+endef
+
+define gb_Package_Package
+$$(if $$(gb_Package_SOURCEDIR_$(1)),$$(call gb_Output_error,gb_Package__check: Package $(1) has already been defined))
+$(if $(filter postprocess% instsetoo_native%,$(1)),,\
+    $(call gb_Postprocess_register_target,AllPackages,Package,$(1)))
+ifeq (,$$(filter $(1),$$(gb_Package_REGISTERED)))
+$$(eval $$(call gb_Output_info,Currently known packages are: $(sort $(gb_Package_REGISTERED)),ALL))
+$$(eval $$(call gb_Output_error,Package $(1) must be registered in Repository.mk or RepositoryExternal.mk))
+endif
+$(call gb_Package_Package_internal,$(1),$(2))
+$$(eval $$(call gb_Module_register_target,$(call gb_Package_get_target,$(1)),$(call gb_Package_get_clean_target,$(1))))
+$(call gb_Helper_make_userfriendly_targets,$(1),Package)
+
+endef
+
+# Ensure that the package is defined.
+#
+# gb_Package__check package
+define gb_Package__check
+$$(if $$(gb_Package_SOURCEDIR_$(1)),,$$(call gb_Output_error,gb_Package__check: Package $(1) has not been defined))
+
+endef
+
+# Set output dir for the package files.
+#
+# Default is $(INSTROOT).
+#
+# gb_Package_set_outdir package outdir
+define gb_Package_set_outdir
+$(call gb_Package__check,$(1))
+gb_Package_OUTDIR_$(1) := $(2)
+
+endef
+
+# Add empty directory (if it's non-empty, don't use this, use
+# gb_Package_add_file for the files in it instead!)
+define gb_Package_add_empty_directory
+$(call gb_Package__check,$(1))
+$(if $(strip $(2)),,$(call gb_Output_error,gb_Package_add_directory requires 2 arguments))
+$(call gb_Package_get_target,$(1)) :| $$(gb_Package_OUTDIR_$(1))/$(2)/.dir
+$(call gb_Package_get_target,$(1)) : FILES += $$(gb_Package_OUTDIR_$(1))/$(2)
+$(call gb_Package_get_clean_target,$(1)) : FILES += $$(gb_Package_OUTDIR_$(1))/$(2)
+
+endef
+
+# Example:
+# $(eval $(call gb_Package_add_empty_directories,foo_inc,inc/foo))
+# # -> inc/foo
+define gb_Package_add_empty_directories
+$(call gb_Package__check,$(1))
+$(foreach file,$(2),$(call gb_Package_add_empty_directory,$(1),$(file)))
+
+endef
+
+define gb_Package_add_symbolic_link
+$(call gb_Package__check,$(1))
+$(if $(strip $(3)),,$(call gb_Output_error,gb_Package_add_symbolic_link requires 3 arguments))
+$(call gb_Package_get_target,$(1)) : $$(gb_Package_OUTDIR_$(1))/$(2)
+$$(gb_Package_OUTDIR_$(1))/$(2) :| $$(dir $$(gb_Package_OUTDIR_$(1))/$(2)).dir
+	rm -f $$@ && ln -s $(3) $$@
+
+$(call gb_Package_get_target,$(1)) : FILES += $$(gb_Package_OUTDIR_$(1))/$(2)
+$(call gb_Package_get_clean_target,$(1)) : FILES += $$(gb_Package_OUTDIR_$(1))/$(2)
+
+endef
+
+define gb_Package_add_file
+$(call gb_Package__check,$(1))
+$(if $(strip $(3)),,$(call gb_Output_error,gb_Package_add_file requires 3 arguments))
+$(call gb_Package_get_target,$(1)) : $$(gb_Package_OUTDIR_$(1))/$(2)
+$(call gb_Package_get_target,$(1)) : FILES += $$(gb_Package_OUTDIR_$(1))/$(2)
+$(call gb_Package_get_clean_target,$(1)) : FILES += $$(gb_Package_OUTDIR_$(1))/$(2)
+$(call gb_PackagePart_PackagePart,$(2),$$(gb_Package_SOURCEDIR_$(1))/$(3),$(call gb_Package_get_preparation_target,$(1)),$$(gb_Package_OUTDIR_$(1)))
+
+endef
+
+# Adds several files at once.
+#
+# Files are copied directly into the specified directory.
+#
+# Example:
+# $(eval $(call gb_Package_Package,foo_inc,$(SRCDIR)/foo/inc))
+# $(eval $(call gb_Package_add_files,foo_inc,inc/foo,foo/bar/foo.hxx))
+# # -> inc/foo/foo.hxx
+define gb_Package_add_files
+$(call gb_Package__check,$(1))
+$(if $(strip $(3)),,$(if $(filter 1,$(words $(2))),,$(call gb_Output_error,gb_Package_add_files: it looks like either pkg name or dest. dir is missing)))
+$(foreach file,$(3),$(call gb_Package_add_file,$(1),$(2)/$(notdir $(file)),$(file)))
+
+endef
+
+# Adds several files at once.
+#
+# Files are copied including subdirectories.
+#
+# Example:
+# $(eval $(call gb_Package_Package,foo_inc,$(SRCDIR)/foo/inc))
+# $(eval $(call gb_Package_add_files,foo_inc,inc,foo/bar/foo.hxx))
+# # -> inc/foo/bar/foo.hxx
+define gb_Package_add_files_with_dir
+$(call gb_Package__check,$(1))
+$(if $(strip $(3)),,$(if $(filter 1,$(words $(2))),,$(call gb_Output_error,gb_Package_add_files: it looks like either pkg name or dest. dir is missing)))
+$(foreach file,$(3),$(call gb_Package_add_file,$(1),$(2)/$(file),$(file)))
+
+endef
+
+# Package files from custom target
+define gb_Package_use_custom_target
+$(call gb_Package__check,$(1))
+$(call gb_Package_get_preparation_target,$(1)) :| $(call gb_CustomTarget_get_target,$(2))
+
+endef
+
+# Package files from unpacked tarball of an external project
+define gb_Package_use_unpacked
+$(call gb_Package__check,$(1))
+$(call gb_Package_get_preparation_target,$(1)) :| $(call gb_UnpackedTarball_get_target,$(2))
+
+endef
+
+# Package files from build of an external project
+define gb_Package_use_external_project
+$(call gb_Package__check,$(1))
+$(call gb_Package_get_preparation_target,$(1)) :| $(call gb_ExternalProject_get_target,$(2))
+
+endef
+
+# vim: set noet sw=4: