Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1111 insertions, 0 deletions

diff --git a/vcl/qt5/Qt5Graphics_Controls.cxx b/vcl/qt5/Qt5Graphics_Controls.cxx
new file mode 100644
index 000000000..dce9c1687
--- /dev/null
+++ b/vcl/qt5/Qt5Graphics_Controls.cxx
@@ -0,0 +1,1111 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <Qt5Graphics_Controls.hxx>
+
+#include <QtGui/QPainter>
+#include <QtWidgets/QApplication>
+#include <QtWidgets/QFrame>
+#include <QtWidgets/QLabel>
+
+#include <qt5/Qt5Tools.hxx>
+#include <qt5/Qt5GraphicsBase.hxx>
+#include <vcl/decoview.hxx>
+
+/**
+  Conversion function between VCL ControlState together with
+  ImplControlValue and Qt state flags.
+  @param nControlState State of the widget (default, focused, ...) in Native Widget Framework.
+  @param aValue Value held by the widget (on, off, ...)
+*/
+static QStyle::State vclStateValue2StateFlag(ControlState nControlState,
+                                             const ImplControlValue& aValue)
+{
+    QStyle::State nState
+        = ((nControlState & ControlState::ENABLED) ? QStyle::State_Enabled : QStyle::State_None)
+          | ((nControlState & ControlState::FOCUSED) ? QStyle::State_HasFocus : QStyle::State_None)
+          | ((nControlState & ControlState::PRESSED) ? QStyle::State_Sunken : QStyle::State_None)
+          | ((nControlState & ControlState::SELECTED) ? QStyle::State_Selected : QStyle::State_None)
+          | ((nControlState & ControlState::ROLLOVER) ? QStyle::State_MouseOver
+                                                      : QStyle::State_None);
+
+    switch (aValue.getTristateVal())
+    {
+        case ButtonValue::On:
+            nState |= QStyle::State_On;
+            break;
+        case ButtonValue::Off:
+            nState |= QStyle::State_Off;
+            break;
+        case ButtonValue::Mixed:
+            nState |= QStyle::State_NoChange;
+            break;
+        default:
+            break;
+    }
+
+    return nState;
+}
+
+Qt5Graphics_Controls::Qt5Graphics_Controls(const Qt5GraphicsBase& rGraphics)
+    : m_rGraphics(rGraphics)
+{
+}
+
+bool Qt5Graphics_Controls::isNativeControlSupported(ControlType type, ControlPart part)
+{
+    switch (type)
+    {
+        case ControlType::Tooltip:
+        case ControlType::Progress:
+        case ControlType::ListNode:
+            return (part == ControlPart::Entire);
+
+        case ControlType::Radiobutton:
+        case ControlType::Checkbox:
+            return (part == ControlPart::Entire) || (part == ControlPart::Focus);
+        case ControlType::Pushbutton:
+            return (part == ControlPart::Entire);
+
+        case ControlType::ListHeader:
+            return (part == ControlPart::Button);
+
+        case ControlType::Menubar:
+        case ControlType::MenuPopup:
+        case ControlType::Editbox:
+        case ControlType::MultilineEditbox:
+        case ControlType::Combobox:
+        case ControlType::Toolbar:
+        case ControlType::Frame:
+        case ControlType::Scrollbar:
+        case ControlType::WindowBackground:
+        case ControlType::Fixedline:
+            return true;
+
+        case ControlType::Listbox:
+            return (part == ControlPart::Entire || part == ControlPart::HasBackgroundTexture);
+
+        case ControlType::Spinbox:
+            return (part == ControlPart::Entire || part == ControlPart::HasBackgroundTexture);
+
+        case ControlType::Slider:
+            return (part == ControlPart::TrackHorzArea || part == ControlPart::TrackVertArea);
+
+        case ControlType::TabItem:
+        case ControlType::TabPane:
+            return ((part == ControlPart::Entire) || part == ControlPart::TabPaneWithHeader);
+
+        default:
+            break;
+    }
+
+    return false;
+}
+
+inline int Qt5Graphics_Controls::pixelMetric(QStyle::PixelMetric metric, const QStyleOption* option)
+{
+    return QApplication::style()->pixelMetric(metric, option);
+}
+
+inline QSize Qt5Graphics_Controls::sizeFromContents(QStyle::ContentsType type,
+                                                    const QStyleOption* option,
+                                                    const QSize& contentsSize)
+{
+    return QApplication::style()->sizeFromContents(type, option, contentsSize);
+}
+
+inline QRect Qt5Graphics_Controls::subControlRect(QStyle::ComplexControl control,
+                                                  const QStyleOptionComplex* option,
+                                                  QStyle::SubControl subControl)
+{
+    return QApplication::style()->subControlRect(control, option, subControl);
+}
+
+inline QRect Qt5Graphics_Controls::subElementRect(QStyle::SubElement element,
+                                                  const QStyleOption* option)
+{
+    return QApplication::style()->subElementRect(element, option);
+}
+
+void Qt5Graphics_Controls::draw(QStyle::ControlElement element, QStyleOption* option, QImage* image,
+                                QStyle::State const state, QRect rect)
+{
+    const QRect& targetRect = !rect.isNull() ? rect : image->rect();
+
+    option->state |= state;
+    option->rect = downscale(targetRect);
+
+    QPainter painter(image);
+    QApplication::style()->drawControl(element, option, &painter);
+}
+
+void Qt5Graphics_Controls::draw(QStyle::PrimitiveElement element, QStyleOption* option,
+                                QImage* image, QStyle::State const state, QRect rect)
+{
+    const QRect& targetRect = !rect.isNull() ? rect : image->rect();
+
+    option->state |= state;
+    option->rect = downscale(targetRect);
+
+    QPainter painter(image);
+    QApplication::style()->drawPrimitive(element, option, &painter);
+}
+
+void Qt5Graphics_Controls::draw(QStyle::ComplexControl element, QStyleOptionComplex* option,
+                                QImage* image, QStyle::State const state)
+{
+    const QRect& targetRect = image->rect();
+
+    option->state |= state;
+    option->rect = downscale(targetRect);
+
+    QPainter painter(image);
+    QApplication::style()->drawComplexControl(element, option, &painter);
+}
+
+void Qt5Graphics_Controls::drawFrame(QStyle::PrimitiveElement element, QImage* image,
+                                     QStyle::State const& state, bool bClip,
+                                     QStyle::PixelMetric eLineMetric)
+{
+    const int fw = pixelMetric(eLineMetric);
+    QStyleOptionFrame option;
+    option.frameShape = QFrame::StyledPanel;
+    option.state = QStyle::State_Sunken | state;
+    option.lineWidth = fw;
+
+    QRect aRect = downscale(image->rect());
+    option.rect = aRect;
+
+    QPainter painter(image);
+    if (bClip)
+        painter.setClipRegion(QRegion(aRect).subtracted(aRect.adjusted(fw, fw, -fw, -fw)));
+    QApplication::style()->drawPrimitive(element, &option, &painter);
+}
+
+void Qt5Graphics_Controls::fillQStyleOptionTab(const ImplControlValue& value, QStyleOptionTab& sot)
+{
+    const TabitemValue& rValue = static_cast<const TabitemValue&>(value);
+    if (rValue.isFirst())
+        sot.position = rValue.isLast() ? QStyleOptionTab::OnlyOneTab : QStyleOptionTab::Beginning;
+    else if (rValue.isLast())
+        sot.position = rValue.isFirst() ? QStyleOptionTab::OnlyOneTab : QStyleOptionTab::End;
+    else
+        sot.position = QStyleOptionTab::Middle;
+}
+
+void Qt5Graphics_Controls::fullQStyleOptionTabWidgetFrame(QStyleOptionTabWidgetFrame& option,
+                                                          bool bDownscale)
+{
+    option.state = QStyle::State_Enabled;
+    option.rightCornerWidgetSize = QSize(0, 0);
+    option.leftCornerWidgetSize = QSize(0, 0);
+    int nLineWidth = pixelMetric(QStyle::PM_DefaultFrameWidth);
+    option.lineWidth = bDownscale ? std::max(1, downscale(nLineWidth, Round::Ceil)) : nLineWidth;
+    option.midLineWidth = 0;
+    option.shape = QTabBar::RoundedNorth;
+}
+
+bool Qt5Graphics_Controls::drawNativeControl(ControlType type, ControlPart part,
+                                             const tools::Rectangle& rControlRegion,
+                                             ControlState nControlState,
+                                             const ImplControlValue& value, const OUString&,
+                                             const Color& /*rBackgroundColor*/)
+{
+    bool nativeSupport = isNativeControlSupported(type, part);
+    if (!nativeSupport)
+    {
+        assert(!nativeSupport && "drawNativeControl called without native support!");
+        return false;
+    }
+
+    if (m_lastPopupRect.isValid()
+        && (type != ControlType::MenuPopup || part != ControlPart::MenuItem))
+        m_lastPopupRect = QRect();
+
+    bool returnVal = true;
+
+    QRect widgetRect = toQRect(rControlRegion);
+
+    //if no image, or resized, make a new image
+    if (!m_image || m_image->size() != widgetRect.size())
+    {
+        m_image.reset(new QImage(widgetRect.width(), widgetRect.height(),
+                                 QImage::Format_ARGB32_Premultiplied));
+        m_image->setDevicePixelRatio(m_rGraphics.devicePixelRatioF());
+    }
+
+    // Default image color - just once
+    switch (type)
+    {
+        case ControlType::MenuPopup:
+            if (part == ControlPart::MenuItemCheckMark || part == ControlPart::MenuItemRadioMark)
+            {
+                // it is necessary to fill the background transparently first, as this
+                // is painted after menuitem highlight, otherwise there would be a grey area
+                m_image->fill(Qt::transparent);
+                break;
+            }
+            [[fallthrough]]; // QPalette::Window
+        case ControlType::Menubar:
+        case ControlType::WindowBackground:
+            m_image->fill(QApplication::palette().color(QPalette::Window).rgb());
+            break;
+        case ControlType::Tooltip:
+            m_image->fill(QApplication::palette().color(QPalette::ToolTipBase).rgb());
+            break;
+        case ControlType::Scrollbar:
+            if ((part == ControlPart::DrawBackgroundVert)
+                || (part == ControlPart::DrawBackgroundHorz))
+            {
+                m_image->fill(QApplication::palette().color(QPalette::Window).rgb());
+                break;
+            }
+            [[fallthrough]]; // Qt::transparent
+        default:
+            m_image->fill(Qt::transparent);
+            break;
+    }
+
+    if (type == ControlType::Pushbutton)
+    {
+        assert(part == ControlPart::Entire);
+        QStyleOptionButton option;
+        draw(QStyle::CE_PushButton, &option, m_image.get(),
+             vclStateValue2StateFlag(nControlState, value));
+    }
+    else if (type == ControlType::Menubar)
+    {
+        if (part == ControlPart::MenuItem)
+        {
+            QStyleOptionMenuItem option;
+            option.state = vclStateValue2StateFlag(nControlState, value);
+            if ((nControlState & ControlState::ROLLOVER)
+                && QApplication::style()->styleHint(QStyle::SH_MenuBar_MouseTracking))
+                option.state |= QStyle::State_Selected;
+
+            if (nControlState
+                & ControlState::SELECTED) // Passing State_Sunken is currently not documented.
+                option.state |= QStyle::State_Sunken; // But some kinds of QStyle interpret it.
+
+            draw(QStyle::CE_MenuBarItem, &option, m_image.get());
+        }
+        else if (part == ControlPart::Entire)
+        {
+            QStyleOptionMenuItem option;
+            draw(QStyle::CE_MenuBarEmptyArea, &option, m_image.get(),
+                 vclStateValue2StateFlag(nControlState, value));
+        }
+        else
+        {
+            returnVal = false;
+        }
+    }
+    else if (type == ControlType::MenuPopup)
+    {
+        assert(part == ControlPart::MenuItem ? m_lastPopupRect.isValid()
+                                             : !m_lastPopupRect.isValid());
+        if (part == ControlPart::MenuItem)
+        {
+            QStyleOptionMenuItem option;
+            draw(QStyle::CE_MenuItem, &option, m_image.get(),
+                 vclStateValue2StateFlag(nControlState, value));
+            // HACK: LO core first paints the entire popup and only then it paints menu items,
+            // but QMenu::paintEvent() paints popup frame after all items. That means highlighted
+            // items here would paint the highlight over the frame border. Since calls to ControlPart::MenuItem
+            // are always preceded by calls to ControlPart::Entire, just remember the size for the whole
+            // popup (otherwise not possible to get here) and draw the border afterwards.
+            QRect framerect(m_lastPopupRect.topLeft() - widgetRect.topLeft(),
+                            widgetRect.size().expandedTo(m_lastPopupRect.size()));
+            QStyleOptionFrame frame;
+            draw(QStyle::PE_FrameMenu, &frame, m_image.get(),
+                 vclStateValue2StateFlag(nControlState, value), framerect);
+        }
+        else if (part == ControlPart::Separator)
+        {
+            QStyleOptionMenuItem option;
+            option.menuItemType = QStyleOptionMenuItem::Separator;
+            // Painting the whole menu item area results in different background
+            // with at least Plastique style, so clip only to the separator itself
+            // (QSize( 2, 2 ) is hardcoded in Qt)
+            option.rect = m_image->rect();
+            QSize size = sizeFromContents(QStyle::CT_MenuItem, &option, QSize(2, 2));
+            QRect rect = m_image->rect();
+            QPoint center = rect.center();
+            rect.setHeight(size.height());
+            rect.moveCenter(center);
+            option.state |= vclStateValue2StateFlag(nControlState, value);
+            option.rect = rect;
+
+            QPainter painter(m_image.get());
+            // don't paint over popup frame border (like the hack above, but here it can be simpler)
+            const int fw = pixelMetric(QStyle::PM_MenuPanelWidth);
+            painter.setClipRect(rect.adjusted(fw, 0, -fw, 0));
+            QApplication::style()->drawControl(QStyle::CE_MenuItem, &option, &painter);
+        }
+        else if (part == ControlPart::MenuItemCheckMark || part == ControlPart::MenuItemRadioMark)
+        {
+            QStyleOptionMenuItem option;
+            option.checkType = (part == ControlPart::MenuItemCheckMark)
+                                   ? QStyleOptionMenuItem::NonExclusive
+                                   : QStyleOptionMenuItem::Exclusive;
+            option.checked = bool(nControlState & ControlState::PRESSED);
+            // widgetRect is now the rectangle for the checkbox/radiobutton itself, but Qt
+            // paints the whole menu item, so translate position (and it'll be clipped);
+            // it is also necessary to fill the background transparently first, as this
+            // is painted after menuitem highlight, otherwise there would be a grey area
+            assert(value.getType() == ControlType::MenuPopup);
+            const MenupopupValue* menuVal = static_cast<const MenupopupValue*>(&value);
+            QRect menuItemRect(toQRect(menuVal->maItemRect));
+            QRect rect(menuItemRect.topLeft() - widgetRect.topLeft(),
+                       widgetRect.size().expandedTo(menuItemRect.size()));
+            // checkboxes are always displayed next to images in menus, so are never centered
+            const int focus_size = pixelMetric(QStyle::PM_FocusFrameHMargin);
+            rect.moveTo(-focus_size, rect.y());
+            draw(QStyle::CE_MenuItem, &option, m_image.get(),
+                 vclStateValue2StateFlag(nControlState & ~ControlState::PRESSED, value), rect);
+        }
+        else if (part == ControlPart::Entire)
+        {
+            QStyleOptionMenuItem option;
+            option.state = vclStateValue2StateFlag(nControlState, value);
+            draw(QStyle::PE_PanelMenu, &option, m_image.get());
+            // Try hard to get any frame!
+            QStyleOptionFrame frame;
+            draw(QStyle::PE_FrameMenu, &frame, m_image.get());
+            draw(QStyle::PE_FrameWindow, &frame, m_image.get());
+            m_lastPopupRect = widgetRect;
+        }
+        else
+            returnVal = false;
+    }
+    else if ((type == ControlType::Toolbar) && (part == ControlPart::Button))
+    {
+        QStyleOptionToolButton option;
+
+        option.arrowType = Qt::NoArrow;
+        option.subControls = QStyle::SC_ToolButton;
+        option.state = vclStateValue2StateFlag(nControlState, value);
+        option.state |= QStyle::State_Raised | QStyle::State_Enabled | QStyle::State_AutoRaise;
+
+        draw(QStyle::CC_ToolButton, &option, m_image.get());
+    }
+    else if ((type == ControlType::Toolbar) && (part == ControlPart::Entire))
+    {
+        QStyleOptionToolBar option;
+        draw(QStyle::CE_ToolBar, &option, m_image.get(),
+             vclStateValue2StateFlag(nControlState, value));
+    }
+    else if ((type == ControlType::Toolbar)
+             && (part == ControlPart::ThumbVert || part == ControlPart::ThumbHorz))
+    {
+        // reduce paint area only to the handle area
+        const int handleExtend = pixelMetric(QStyle::PM_ToolBarHandleExtent);
+        QStyleOption option;
+        QRect aRect = m_image->rect();
+        if (part == ControlPart::ThumbVert)
+        {
+            aRect.setWidth(handleExtend);
+            option.state = QStyle::State_Horizontal;
+        }
+        else
+            aRect.setHeight(handleExtend);
+        draw(QStyle::PE_IndicatorToolBarHandle, &option, m_image.get(),
+             vclStateValue2StateFlag(nControlState, value), aRect);
+    }
+    else if (type == ControlType::Editbox || type == ControlType::MultilineEditbox)
+    {
+        drawFrame(QStyle::PE_FrameLineEdit, m_image.get(),
+                  vclStateValue2StateFlag(nControlState, value), false);
+    }
+    else if (type == ControlType::Combobox)
+    {
+        QStyleOptionComboBox option;
+        option.editable = true;
+        draw(QStyle::CC_ComboBox, &option, m_image.get(),
+             vclStateValue2StateFlag(nControlState, value));
+    }
+    else if (type == ControlType::Listbox)
+    {
+        QStyleOptionComboBox option;
+        option.editable = false;
+        switch (part)
+        {
+            case ControlPart::ListboxWindow:
+                drawFrame(QStyle::PE_Frame, m_image.get(),
+                          vclStateValue2StateFlag(nControlState, value), true,
+                          QStyle::PM_ComboBoxFrameWidth);
+                break;
+            case ControlPart::SubEdit:
+                draw(QStyle::CE_ComboBoxLabel, &option, m_image.get(),
+                     vclStateValue2StateFlag(nControlState, value));
+                break;
+            case ControlPart::Entire:
+                draw(QStyle::CC_ComboBox, &option, m_image.get(),
+                     vclStateValue2StateFlag(nControlState, value));
+                break;
+            case ControlPart::ButtonDown:
+                option.subControls = QStyle::SC_ComboBoxArrow;
+                draw(QStyle::CC_ComboBox, &option, m_image.get(),
+                     vclStateValue2StateFlag(nControlState, value));
+                break;
+            default:
+                returnVal = false;
+                break;
+        }
+    }
+    else if (type == ControlType::ListNode)
+    {
+        QStyleOption option;
+        option.state = vclStateValue2StateFlag(nControlState, value);
+        option.state |= QStyle::State_Item | QStyle::State_Children;
+
+        if (value.getTristateVal() == ButtonValue::On)
+            option.state |= QStyle::State_Open;
+
+        draw(QStyle::PE_IndicatorBranch, &option, m_image.get());
+    }
+    else if (type == ControlType::ListHeader)
+    {
+        QStyleOptionHeader option;
+        draw(QStyle::CE_HeaderSection, &option, m_image.get(),
+             vclStateValue2StateFlag(nControlState, value));
+    }
+    else if (type == ControlType::Checkbox)
+    {
+        if (part == ControlPart::Entire)
+        {
+            QStyleOptionButton option;
+            // clear FOCUSED bit, focus is drawn separately
+            nControlState &= ~ControlState::FOCUSED;
+            draw(QStyle::CE_CheckBox, &option, m_image.get(),
+                 vclStateValue2StateFlag(nControlState, value));
+        }
+        else if (part == ControlPart::Focus)
+        {
+            QStyleOptionFocusRect option;
+            draw(QStyle::PE_FrameFocusRect, &option, m_image.get(),
+                 vclStateValue2StateFlag(nControlState, value));
+        }
+    }
+    else if (type == ControlType::Scrollbar)
+    {
+        if ((part == ControlPart::DrawBackgroundVert) || (part == ControlPart::DrawBackgroundHorz))
+        {
+            QStyleOptionSlider option;
+            assert(value.getType() == ControlType::Scrollbar);
+            const ScrollbarValue* sbVal = static_cast<const ScrollbarValue*>(&value);
+
+            //if the scroll bar is active (aka not degenerate... allow for hover events)
+            if (sbVal->mnVisibleSize < sbVal->mnMax)
+                option.state = QStyle::State_MouseOver;
+
+            bool horizontal = (part == ControlPart::DrawBackgroundHorz); //horizontal or vertical
+            option.orientation = horizontal ? Qt::Horizontal : Qt::Vertical;
+            if (horizontal)
+                option.state |= QStyle::State_Horizontal;
+
+            // If the scrollbar has a mnMin == 0 and mnMax == 0 then mnVisibleSize is set to -1?!
+            // I don't know if a negative mnVisibleSize makes any sense, so just handle this case
+            // without crashing LO with a SIGFPE in the Qt library.
+            const long nVisibleSize = (sbVal->mnMin == sbVal->mnMax) ? 0 : sbVal->mnVisibleSize;
+
+            option.minimum = sbVal->mnMin;
+            option.maximum = sbVal->mnMax - nVisibleSize;
+            option.maximum = qMax(option.maximum, option.minimum); // bnc#619772
+            option.sliderValue = sbVal->mnCur;
+            option.sliderPosition = sbVal->mnCur;
+            option.pageStep = nVisibleSize;
+            if (part == ControlPart::DrawBackgroundHorz)
+                option.upsideDown
+                    = (QGuiApplication::isRightToLeft()
+                       && sbVal->maButton1Rect.Left() < sbVal->maButton2Rect.Left())
+                      || (QGuiApplication::isLeftToRight()
+                          && sbVal->maButton1Rect.Left() > sbVal->maButton2Rect.Left());
+
+            //setup the active control... always the slider
+            if (sbVal->mnThumbState & ControlState::ROLLOVER)
+                option.activeSubControls = QStyle::SC_ScrollBarSlider;
+
+            draw(QStyle::CC_ScrollBar, &option, m_image.get(),
+                 vclStateValue2StateFlag(nControlState, value));
+        }
+        else
+        {
+            returnVal = false;
+        }
+    }
+    else if (type == ControlType::Spinbox)
+    {
+        QStyleOptionSpinBox option;
+        option.frame = true;
+
+        // determine active control
+        if (value.getType() == ControlType::SpinButtons)
+        {
+            const SpinbuttonValue* pSpinVal = static_cast<const SpinbuttonValue*>(&value);
+            if (pSpinVal->mnUpperState & ControlState::PRESSED)
+                option.activeSubControls |= QStyle::SC_SpinBoxUp;
+            if (pSpinVal->mnLowerState & ControlState::PRESSED)
+                option.activeSubControls |= QStyle::SC_SpinBoxDown;
+            if (pSpinVal->mnUpperState & ControlState::ENABLED)
+                option.stepEnabled |= QAbstractSpinBox::StepUpEnabled;
+            if (pSpinVal->mnLowerState & ControlState::ENABLED)
+                option.stepEnabled |= QAbstractSpinBox::StepDownEnabled;
+            if (pSpinVal->mnUpperState & ControlState::ROLLOVER)
+                option.state = QStyle::State_MouseOver;
+            if (pSpinVal->mnLowerState & ControlState::ROLLOVER)
+                option.state = QStyle::State_MouseOver;
+        }
+
+        draw(QStyle::CC_SpinBox, &option, m_image.get(),
+             vclStateValue2StateFlag(nControlState, value));
+    }
+    else if (type == ControlType::Radiobutton)
+    {
+        if (part == ControlPart::Entire)
+        {
+            QStyleOptionButton option;
+            // clear FOCUSED bit, focus is drawn separately
+            nControlState &= ~ControlState::FOCUSED;
+            draw(QStyle::CE_RadioButton, &option, m_image.get(),
+                 vclStateValue2StateFlag(nControlState, value));
+        }
+        else if (part == ControlPart::Focus)
+        {
+            QStyleOptionFocusRect option;
+            draw(QStyle::PE_FrameFocusRect, &option, m_image.get(),
+                 vclStateValue2StateFlag(nControlState, value));
+        }
+    }
+    else if (type == ControlType::Tooltip)
+    {
+        QStyleOption option;
+        draw(QStyle::PE_PanelTipLabel, &option, m_image.get(),
+             vclStateValue2StateFlag(nControlState, value));
+    }
+    else if (type == ControlType::Frame)
+    {
+        drawFrame(QStyle::PE_Frame, m_image.get(), vclStateValue2StateFlag(nControlState, value));
+    }
+    else if (type == ControlType::WindowBackground)
+    {
+        // Nothing to do - see "Default image color" switch ^^
+    }
+    else if (type == ControlType::Fixedline)
+    {
+        QStyleOptionMenuItem option;
+        option.menuItemType = QStyleOptionMenuItem::Separator;
+        option.state = vclStateValue2StateFlag(nControlState, value);
+        option.state |= QStyle::State_Item;
+
+        draw(QStyle::CE_MenuItem, &option, m_image.get());
+    }
+    else if (type == ControlType::Slider
+             && (part == ControlPart::TrackHorzArea || part == ControlPart::TrackVertArea))
+    {
+        assert(value.getType() == ControlType::Slider);
+        const SliderValue* slVal = static_cast<const SliderValue*>(&value);
+        QStyleOptionSlider option;
+
+        option.state = vclStateValue2StateFlag(nControlState, value);
+        option.maximum = slVal->mnMax;
+        option.minimum = slVal->mnMin;
+        option.sliderPosition = option.sliderValue = slVal->mnCur;
+        bool horizontal = (part == ControlPart::TrackHorzArea); //horizontal or vertical
+        option.orientation = horizontal ? Qt::Horizontal : Qt::Vertical;
+        if (horizontal)
+            option.state |= QStyle::State_Horizontal;
+
+        draw(QStyle::CC_Slider, &option, m_image.get());
+    }
+    else if (type == ControlType::Progress && part == ControlPart::Entire)
+    {
+        SAL_WNODEPRECATED_DECLARATIONS_PUSH
+        QStyleOptionProgressBarV2 option;
+        SAL_WNODEPRECATED_DECLARATIONS_POP
+        option.minimum = 0;
+        option.maximum = widgetRect.width();
+        option.progress = value.getNumericVal();
+
+        draw(QStyle::CE_ProgressBar, &option, m_image.get(),
+             vclStateValue2StateFlag(nControlState, value));
+    }
+    else if (type == ControlType::TabItem && part == ControlPart::Entire)
+    {
+        QStyleOptionTab sot;
+        fillQStyleOptionTab(value, sot);
+        draw(QStyle::CE_TabBarTabShape, &sot, m_image.get(),
+             vclStateValue2StateFlag(nControlState, value));
+    }
+    else if (type == ControlType::TabPane && part == ControlPart::Entire)
+    {
+        const TabPaneValue& rValue = static_cast<const TabPaneValue&>(value);
+
+        // get the overlap size for the tabs, so they will overlap the frame
+        QStyleOptionTab tabOverlap;
+        tabOverlap.shape = QTabBar::RoundedNorth;
+        TabPaneValue::m_nOverlap = pixelMetric(QStyle::PM_TabBarBaseOverlap, &tabOverlap);
+
+        QStyleOptionTabWidgetFrame option;
+        fullQStyleOptionTabWidgetFrame(option, false);
+        option.tabBarRect = toQRect(rValue.m_aTabHeaderRect);
+        option.selectedTabRect
+            = rValue.m_aSelectedTabRect.IsEmpty() ? QRect() : toQRect(rValue.m_aSelectedTabRect);
+        option.tabBarSize = toQSize(rValue.m_aTabHeaderRect.GetSize());
+        option.rect = m_image->rect();
+        QRect aRect = subElementRect(QStyle::SE_TabWidgetTabPane, &option);
+        draw(QStyle::PE_FrameTabWidget, &option, m_image.get(),
+             vclStateValue2StateFlag(nControlState, value), aRect);
+    }
+    else
+    {
+        returnVal = false;
+    }
+
+    return returnVal;
+}
+
+bool Qt5Graphics_Controls::getNativeControlRegion(ControlType type, ControlPart part,
+                                                  const tools::Rectangle& controlRegion,
+                                                  ControlState controlState,
+                                                  const ImplControlValue& val, const OUString&,
+                                                  tools::Rectangle& nativeBoundingRegion,
+                                                  tools::Rectangle& nativeContentRegion)
+{
+    bool retVal = false;
+
+    QRect boundingRect = toQRect(controlRegion);
+    QRect contentRect = boundingRect;
+    QStyleOptionComplex styleOption;
+
+    switch (type)
+    {
+        // Metrics of the push button
+        case ControlType::Pushbutton:
+            if (part == ControlPart::Entire)
+            {
+                styleOption.state = vclStateValue2StateFlag(controlState, val);
+
+                if (controlState & ControlState::DEFAULT)
+                {
+                    int size = upscale(pixelMetric(QStyle::PM_ButtonDefaultIndicator, &styleOption),
+                                       Round::Ceil);
+                    boundingRect.adjust(-size, -size, size, size);
+                    retVal = true;
+                }
+            }
+            break;
+        case ControlType::Editbox:
+        case ControlType::MultilineEditbox:
+        {
+            // we have to get stable borders, otherwise layout loops.
+            // so we simply only scale the detected borders.
+            QStyleOptionFrame fo;
+            fo.frameShape = QFrame::StyledPanel;
+            fo.state = QStyle::State_Sunken;
+            fo.lineWidth = pixelMetric(QStyle::PM_DefaultFrameWidth);
+            fo.rect = downscale(contentRect);
+            fo.rect.setSize(sizeFromContents(QStyle::CT_LineEdit, &fo, fo.rect.size()));
+            QRect aSubRect = subElementRect(QStyle::SE_LineEditContents, &fo);
+
+            // VCL tests borders with small defaults before layout, where Qt returns no sub-rect,
+            // so this gets us at least some frame.
+            int nLine = upscale(fo.lineWidth, Round::Ceil);
+            int nLeft = qMin(-nLine, upscale(fo.rect.left() - aSubRect.left(), Round::Floor));
+            int nTop = qMin(-nLine, upscale(fo.rect.top() - aSubRect.top(), Round::Floor));
+            int nRight = qMax(nLine, upscale(fo.rect.right() - aSubRect.right(), Round::Ceil));
+            int nBottom = qMax(nLine, upscale(fo.rect.bottom() - aSubRect.bottom(), Round::Ceil));
+            boundingRect.adjust(nLeft, nTop, nRight, nBottom);
+            retVal = true;
+            break;
+        }
+        case ControlType::Checkbox:
+            if (part == ControlPart::Entire)
+            {
+                styleOption.state = vclStateValue2StateFlag(controlState, val);
+
+                int nWidth = pixelMetric(QStyle::PM_IndicatorWidth, &styleOption);
+                int nHeight = pixelMetric(QStyle::PM_IndicatorHeight, &styleOption);
+                contentRect.setSize(upscale(QSize(nWidth, nHeight), Round::Ceil));
+
+                int nHMargin = pixelMetric(QStyle::PM_FocusFrameHMargin, &styleOption);
+                int nVMargin = pixelMetric(QStyle::PM_FocusFrameVMargin, &styleOption);
+                contentRect.adjust(0, 0, 2 * upscale(nHMargin, Round::Ceil),
+                                   2 * upscale(nVMargin, Round::Ceil));
+
+                boundingRect = contentRect;
+                retVal = true;
+            }
+            break;
+        case ControlType::Combobox:
+        case ControlType::Listbox:
+        {
+            QStyleOptionComboBox cbo;
+
+            cbo.rect = downscale(QRect(0, 0, contentRect.width(), contentRect.height()));
+            cbo.state = vclStateValue2StateFlag(controlState, val);
+
+            switch (part)
+            {
+                case ControlPart::Entire:
+                {
+                    // find out the minimum size that should be used
+                    // assume contents is a text line
+                    QSize aContentSize = downscale(contentRect.size(), Round::Ceil);
+                    aContentSize.setHeight(QApplication::fontMetrics().height());
+                    QSize aMinSize = upscale(
+                        sizeFromContents(QStyle::CT_ComboBox, &cbo, aContentSize), Round::Ceil);
+                    if (aMinSize.height() > contentRect.height())
+                        contentRect.setHeight(aMinSize.height());
+                    boundingRect = contentRect;
+                    retVal = true;
+                    break;
+                }
+                case ControlPart::ButtonDown:
+                {
+                    contentRect = upscale(
+                        subControlRect(QStyle::CC_ComboBox, &cbo, QStyle::SC_ComboBoxArrow));
+                    contentRect.translate(boundingRect.left(), boundingRect.top());
+                    retVal = true;
+                    break;
+                }
+                case ControlPart::SubEdit:
+                {
+                    contentRect = upscale(
+                        subControlRect(QStyle::CC_ComboBox, &cbo, QStyle::SC_ComboBoxEditField));
+                    contentRect.translate(boundingRect.left(), boundingRect.top());
+                    retVal = true;
+                    break;
+                }
+                default:
+                    break;
+            }
+            break;
+        }
+        case ControlType::Spinbox:
+        {
+            QStyleOptionSpinBox sbo;
+            sbo.frame = true;
+
+            sbo.rect = downscale(QRect(0, 0, contentRect.width(), contentRect.height()));
+            sbo.state = vclStateValue2StateFlag(controlState, val);
+
+            switch (part)
+            {
+                case ControlPart::Entire:
+                {
+                    QSize aContentSize = downscale(contentRect.size(), Round::Ceil);
+                    aContentSize.setHeight(QApplication::fontMetrics().height());
+                    QSize aMinSize = upscale(
+                        sizeFromContents(QStyle::CT_SpinBox, &sbo, aContentSize), Round::Ceil);
+                    if (aMinSize.height() > contentRect.height())
+                        contentRect.setHeight(aMinSize.height());
+                    boundingRect = contentRect;
+                    retVal = true;
+                    break;
+                }
+                case ControlPart::ButtonUp:
+                    contentRect
+                        = upscale(subControlRect(QStyle::CC_SpinBox, &sbo, QStyle::SC_SpinBoxUp));
+                    contentRect.translate(boundingRect.left(), boundingRect.top());
+                    retVal = true;
+                    break;
+                case ControlPart::ButtonDown:
+                    contentRect
+                        = upscale(subControlRect(QStyle::CC_SpinBox, &sbo, QStyle::SC_SpinBoxDown));
+                    contentRect.translate(boundingRect.left(), boundingRect.top());
+                    retVal = true;
+                    break;
+                case ControlPart::SubEdit:
+                    contentRect = upscale(
+                        subControlRect(QStyle::CC_SpinBox, &sbo, QStyle::SC_SpinBoxEditField));
+                    contentRect.translate(boundingRect.left(), boundingRect.top());
+                    retVal = true;
+                    break;
+                default:
+                    break;
+            }
+            break;
+        }
+        case ControlType::MenuPopup:
+        {
+            int h, w;
+            switch (part)
+            {
+                case ControlPart::MenuItemCheckMark:
+                    h = upscale(pixelMetric(QStyle::PM_IndicatorHeight), Round::Floor);
+                    w = upscale(pixelMetric(QStyle::PM_IndicatorWidth), Round::Floor);
+                    retVal = true;
+                    break;
+                case ControlPart::MenuItemRadioMark:
+                    h = upscale(pixelMetric(QStyle::PM_ExclusiveIndicatorHeight), Round::Floor);
+                    w = upscale(pixelMetric(QStyle::PM_ExclusiveIndicatorWidth), Round::Floor);
+                    retVal = true;
+                    break;
+                default:
+                    break;
+            }
+            if (retVal)
+            {
+                contentRect = QRect(0, 0, w, h);
+                boundingRect = contentRect;
+            }
+            break;
+        }
+        case ControlType::Frame:
+        {
+            if (part == ControlPart::Border)
+            {
+                auto nStyle = static_cast<DrawFrameFlags>(val.getNumericVal() & 0xFFF0);
+                if (nStyle & DrawFrameFlags::NoDraw)
+                {
+                    int nFrameWidth
+                        = upscale(pixelMetric(QStyle::PM_DefaultFrameWidth), Round::Ceil);
+                    contentRect.adjust(nFrameWidth, nFrameWidth, -nFrameWidth, -nFrameWidth);
+                }
+                retVal = true;
+            }
+            break;
+        }
+        case ControlType::Radiobutton:
+        {
+            const int h = upscale(pixelMetric(QStyle::PM_ExclusiveIndicatorHeight), Round::Ceil);
+            const int w = upscale(pixelMetric(QStyle::PM_ExclusiveIndicatorWidth), Round::Ceil);
+
+            contentRect = QRect(boundingRect.left(), boundingRect.top(), w, h);
+            int nHMargin = pixelMetric(QStyle::PM_FocusFrameHMargin, &styleOption);
+            int nVMargin = pixelMetric(QStyle::PM_FocusFrameVMargin, &styleOption);
+            contentRect.adjust(0, 0, upscale(2 * nHMargin, Round::Ceil),
+                               upscale(2 * nVMargin, Round::Ceil));
+            boundingRect = contentRect;
+
+            retVal = true;
+            break;
+        }
+        case ControlType::Slider:
+        {
+            const int w = upscale(pixelMetric(QStyle::PM_SliderLength), Round::Ceil);
+            if (part == ControlPart::ThumbHorz)
+            {
+                contentRect
+                    = QRect(boundingRect.left(), boundingRect.top(), w, boundingRect.height());
+                boundingRect = contentRect;
+                retVal = true;
+            }
+            else if (part == ControlPart::ThumbVert)
+            {
+                contentRect
+                    = QRect(boundingRect.left(), boundingRect.top(), boundingRect.width(), w);
+                boundingRect = contentRect;
+                retVal = true;
+            }
+            break;
+        }
+        case ControlType::Toolbar:
+        {
+            const int nWorH = upscale(pixelMetric(QStyle::PM_ToolBarHandleExtent), Round::Ceil);
+            if (part == ControlPart::ThumbHorz)
+            {
+                contentRect
+                    = QRect(boundingRect.left(), boundingRect.top(), boundingRect.width(), nWorH);
+                boundingRect = contentRect;
+                retVal = true;
+            }
+            else if (part == ControlPart::ThumbVert)
+            {
+                contentRect
+                    = QRect(boundingRect.left(), boundingRect.top(), nWorH, boundingRect.height());
+                boundingRect = contentRect;
+                retVal = true;
+            }
+            else if (part == ControlPart::Button)
+            {
+                QStyleOptionToolButton option;
+                option.arrowType = Qt::NoArrow;
+                option.features = QStyleOptionToolButton::None;
+                option.rect = downscale(QRect({ 0, 0 }, contentRect.size()));
+                contentRect = upscale(
+                    subControlRect(QStyle::CC_ToolButton, &option, QStyle::SC_ToolButton));
+                boundingRect = contentRect;
+                retVal = true;
+            }
+            break;
+        }
+        case ControlType::Scrollbar:
+        {
+            // core can't handle 3-button scrollbars well, so we fix that in hitTestNativeControl(),
+            // for the rest also provide the track area (i.e. area not taken by buttons)
+            if (part == ControlPart::TrackVertArea || part == ControlPart::TrackHorzArea)
+            {
+                QStyleOptionSlider option;
+                bool horizontal = (part == ControlPart::TrackHorzArea); //horizontal or vertical
+                option.orientation = horizontal ? Qt::Horizontal : Qt::Vertical;
+                if (horizontal)
+                    option.state |= QStyle::State_Horizontal;
+                // getNativeControlRegion usually gets ImplControlValue as 'val' (i.e. not the proper
+                // subclass), so use random sensible values (doesn't matter anyway, as the wanted
+                // geometry here depends only on button sizes)
+                option.maximum = 10;
+                option.minimum = 0;
+                option.sliderPosition = option.sliderValue = 4;
+                option.pageStep = 2;
+                // Adjust coordinates to make the widget appear to be at (0,0), i.e. make
+                // widget and screen coordinates the same. QStyle functions should use screen
+                // coordinates but at least QPlastiqueStyle::subControlRect() is buggy
+                // and sometimes uses widget coordinates.
+                option.rect = downscale(QRect({ 0, 0 }, contentRect.size()));
+                contentRect = upscale(
+                    subControlRect(QStyle::CC_ScrollBar, &option, QStyle::SC_ScrollBarGroove));
+                contentRect.translate(boundingRect.left()
+                                          - (contentRect.width() - boundingRect.width()),
+                                      boundingRect.top());
+                boundingRect = contentRect;
+                retVal = true;
+            }
+            break;
+        }
+        case ControlType::TabItem:
+        {
+            QStyleOptionTab sot;
+            fillQStyleOptionTab(val, sot);
+            QSize aMinSize = upscale(sizeFromContents(QStyle::CT_TabBarTab, &sot,
+                                                      downscale(contentRect.size(), Round::Ceil)),
+                                     Round::Ceil);
+            contentRect.setSize(aMinSize);
+            boundingRect = contentRect;
+            retVal = true;
+            break;
+        }
+        case ControlType::TabPane:
+        {
+            const TabPaneValue& rValue = static_cast<const TabPaneValue&>(val);
+            QStyleOptionTabWidgetFrame sotwf;
+            fullQStyleOptionTabWidgetFrame(sotwf, true);
+            QSize contentSize(
+                std::max(rValue.m_aTabHeaderRect.GetWidth(), controlRegion.GetWidth()),
+                rValue.m_aTabHeaderRect.GetHeight() + controlRegion.GetHeight());
+            QSize aMinSize = upscale(
+                sizeFromContents(QStyle::CT_TabWidget, &sotwf, downscale(contentSize, Round::Ceil)),
+                Round::Ceil);
+            contentRect.setSize(aMinSize);
+            boundingRect = contentRect;
+            retVal = true;
+            break;
+        }
+        default:
+            break;
+    }
+    if (retVal)
+    {
+        nativeBoundingRegion = toRectangle(boundingRect);
+        nativeContentRegion = toRectangle(contentRect);
+    }
+
+    return retVal;
+}
+
+/** Test whether the position is in the native widget.
+    If the return value is true, bIsInside contains information whether
+    aPos was or was not inside the native widget specified by the
+    nType/nPart combination.
+*/
+bool Qt5Graphics_Controls::hitTestNativeControl(ControlType nType, ControlPart nPart,
+                                                const tools::Rectangle& rControlRegion,
+                                                const Point& rPos, bool& rIsInside)
+{
+    if (nType == ControlType::Scrollbar)
+    {
+        if (nPart != ControlPart::ButtonUp && nPart != ControlPart::ButtonDown
+            && nPart != ControlPart::ButtonLeft && nPart != ControlPart::ButtonRight)
+        { // we adjust only for buttons (because some scrollbars have 3 buttons,
+            // and LO core doesn't handle such scrollbars well)
+            return false;
+        }
+        rIsInside = false;
+        bool bHorizontal = (nPart == ControlPart::ButtonLeft || nPart == ControlPart::ButtonRight);
+        QRect rect = toQRect(rControlRegion);
+        QPoint pos(rPos.X(), rPos.Y());
+        // Adjust coordinates to make the widget appear to be at (0,0), i.e. make
+        // widget and screen coordinates the same. QStyle functions should use screen
+        // coordinates but at least QPlastiqueStyle::subControlRect() is buggy
+        // and sometimes uses widget coordinates.
+        pos -= rect.topLeft();
+        rect.moveTo(0, 0);
+        QStyleOptionSlider options;
+        options.orientation = bHorizontal ? Qt::Horizontal : Qt::Vertical;
+        if (bHorizontal)
+            options.state |= QStyle::State_Horizontal;
+        options.rect = rect;
+        // some random sensible values, since we call this code only for scrollbar buttons,
+        // the slider position does not exactly matter
+        options.maximum = 10;
+        options.minimum = 0;
+        options.sliderPosition = options.sliderValue = 4;
+        options.pageStep = 2;
+        QStyle::SubControl control
+            = QApplication::style()->hitTestComplexControl(QStyle::CC_ScrollBar, &options, pos);
+        if (nPart == ControlPart::ButtonUp || nPart == ControlPart::ButtonLeft)
+            rIsInside = (control == QStyle::SC_ScrollBarSubLine);
+        else // DOWN, RIGHT
+            rIsInside = (control == QStyle::SC_ScrollBarAddLine);
+        return true;
+    }
+    return false;
+}
+
+inline int Qt5Graphics_Controls::downscale(int size, Round eRound)
+{
+    return static_cast<int>(eRound == Round::Ceil ? ceil(size / m_rGraphics.devicePixelRatioF())
+                                                  : floor(size / m_rGraphics.devicePixelRatioF()));
+}
+
+inline int Qt5Graphics_Controls::upscale(int size, Round eRound)
+{
+    return static_cast<int>(eRound == Round::Ceil ? ceil(size * m_rGraphics.devicePixelRatioF())
+                                                  : floor(size * m_rGraphics.devicePixelRatioF()));
+}
+
+inline QRect Qt5Graphics_Controls::downscale(const QRect& rect)
+{
+    return QRect(downscale(rect.x(), Round::Floor), downscale(rect.y(), Round::Floor),
+                 downscale(rect.width(), Round::Ceil), downscale(rect.height(), Round::Ceil));
+}
+
+inline QRect Qt5Graphics_Controls::upscale(const QRect& rect)
+{
+    return QRect(upscale(rect.x(), Round::Floor), upscale(rect.y(), Round::Floor),
+                 upscale(rect.width(), Round::Ceil), upscale(rect.height(), Round::Ceil));
+}
+
+inline QSize Qt5Graphics_Controls::downscale(const QSize& size, Round eRound)
+{
+    return QSize(downscale(size.width(), eRound), downscale(size.height(), eRound));
+}
+
+inline QSize Qt5Graphics_Controls::upscale(const QSize& size, Round eRound)
+{
+    return QSize(upscale(size.width(), eRound), upscale(size.height(), eRound));
+}
+
+inline QPoint Qt5Graphics_Controls::upscale(const QPoint& point, Round eRound)
+{
+    return QPoint(upscale(point.x(), eRound), upscale(point.y(), eRound));
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */