diff options
Diffstat (limited to 'svx/source/dialog/_contdlg.cxx')
| -rw-r--r-- | svx/source/dialog/_contdlg.cxx | 675 |
1 files changed, 675 insertions, 0 deletions
diff --git a/svx/source/dialog/_contdlg.cxx b/svx/source/dialog/_contdlg.cxx new file mode 100644 index 000000000..d82004f47 --- /dev/null +++ b/svx/source/dialog/_contdlg.cxx @@ -0,0 +1,675 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <sal/config.h> + +#include <tools/helpers.hxx> +#include <svl/eitem.hxx> +#include <sfx2/ctrlitem.hxx> +#include <sfx2/dispatch.hxx> +#include <sfx2/module.hxx> +#include <unotools/localedatawrapper.hxx> + +#include <svx/svxids.hrc> +#include <svx/contdlg.hxx> +#include "contimp.hxx" +#include "contwnd.hxx" +#include <svx/svdopath.hxx> +#include <vcl/svapp.hxx> +#include <vcl/settings.hxx> +#include <vcl/virdev.hxx> +#include "dlgunit.hxx" +#include <vcl/weld.hxx> + +SFX_IMPL_MODELESSDIALOGCONTOLLER_WITHID(SvxContourDlgChildWindow, SID_CONTOUR_DLG); + +SvxContourDlgItem::SvxContourDlgItem( SvxSuperContourDlg& rContourDlg, SfxBindings& rBindings ) : + SfxControllerItem ( SID_CONTOUR_EXEC, rBindings ), + rDlg ( rContourDlg ) +{ +} + +void SvxContourDlgItem::StateChanged( sal_uInt16 nSID, SfxItemState /*eState*/, const SfxPoolItem* pItem ) +{ + if ( pItem && ( SID_CONTOUR_EXEC == nSID ) ) + { + const SfxBoolItem* pStateItem = dynamic_cast<const SfxBoolItem*>( pItem ); + assert(pStateItem); //SfxBoolItem expected + if (pStateItem) + rDlg.SetExecState(!pStateItem->GetValue()); + } +} + +SvxContourDlgChildWindow::SvxContourDlgChildWindow(vcl::Window* _pParent, sal_uInt16 nId, + SfxBindings* pBindings, SfxChildWinInfo const * pInfo) + : SfxChildWindow( _pParent, nId ) +{ + SetController(std::make_shared<SvxContourDlg>(pBindings, this, _pParent->GetFrameWeld())); + SvxContourDlg* pDlg = static_cast<SvxContourDlg*>(GetController().get()); + pDlg->Initialize( pInfo ); +} + +SvxContourDlg::SvxContourDlg(SfxBindings* _pBindings, SfxChildWindow* pCW, + weld::Window* _pParent) + : SfxModelessDialogController(_pBindings, pCW, _pParent, "svx/ui/floatingcontour.ui", "FloatingContour") + , m_xImpl(std::make_unique<SvxSuperContourDlg>(*m_xBuilder, *m_xDialog, _pBindings)) +{ +} + +SvxContourDlg::~SvxContourDlg() +{ +} + +tools::PolyPolygon SvxContourDlg::CreateAutoContour( const Graphic& rGraphic, + const tools::Rectangle* pRect ) +{ + Bitmap aBmp; + bool bContourEdgeDetect = false; + + if ( rGraphic.GetType() == GraphicType::Bitmap ) + { + if( rGraphic.IsAnimated() ) + { + ScopedVclPtrInstance< VirtualDevice > pVDev; + MapMode aTransMap; + const Animation aAnim( rGraphic.GetAnimation() ); + const Size& rSizePix = aAnim.GetDisplaySizePixel(); + const sal_uInt16 nCount = aAnim.Count(); + + if ( pVDev->SetOutputSizePixel( rSizePix ) ) + { + pVDev->SetLineColor( COL_BLACK ); + pVDev->SetFillColor( COL_BLACK ); + + for( sal_uInt16 i = 0; i < nCount; i++ ) + { + const AnimationBitmap& rStepBmp = aAnim.Get( i ); + + // Push Polygon output to the right place; this is the + // offset of the sub-image within the total animation + aTransMap.SetOrigin( Point( rStepBmp.maPositionPixel.X(), rStepBmp.maPositionPixel.Y() ) ); + pVDev->SetMapMode( aTransMap ); + pVDev->DrawPolyPolygon( CreateAutoContour( rStepBmp.maBitmapEx, pRect ) ); + } + + aTransMap.SetOrigin( Point() ); + pVDev->SetMapMode( aTransMap ); + aBmp = pVDev->GetBitmap( Point(), rSizePix ); + aBmp.Convert( BmpConversion::N1BitThreshold ); + } + } + else if( rGraphic.IsTransparent() ) + aBmp = rGraphic.GetBitmapEx().GetMask(); + else + { + aBmp = rGraphic.GetBitmapEx().GetBitmap(); + bContourEdgeDetect = true; + } + } + else if( rGraphic.GetType() != GraphicType::NONE ) + { + const Graphic aTmpGrf( rGraphic.GetGDIMetaFile().GetMonochromeMtf( COL_BLACK ) ); + ScopedVclPtrInstance< VirtualDevice > pVDev; + Size aSizePix( pVDev->LogicToPixel( aTmpGrf.GetPrefSize(), aTmpGrf.GetPrefMapMode() ) ); + + if( aSizePix.Width() && aSizePix.Height() && ( aSizePix.Width() > 512 || aSizePix.Height() > 512 ) ) + { + double fWH = static_cast<double>(aSizePix.Width()) / aSizePix.Height(); + + if( fWH <= 1.0 ) + { + aSizePix.setHeight(512); + aSizePix.setWidth( FRound( ( aSizePix.Height() ) * fWH ) ); + } + else + { + aSizePix.setWidth(512); + aSizePix.setHeight( FRound( ( aSizePix.Width() ) / fWH ) ); + } + } + + if( pVDev->SetOutputSizePixel( aSizePix ) ) + { + const Point aPt; + aTmpGrf.Draw( pVDev, aPt, aSizePix ); + aBmp = pVDev->GetBitmap( aPt, aSizePix ); + } + + bContourEdgeDetect = true; + } + + aBmp.SetPrefSize( rGraphic.GetPrefSize() ); + aBmp.SetPrefMapMode( rGraphic.GetPrefMapMode() ); + + return tools::PolyPolygon( BitmapEx(aBmp).GetContour( bContourEdgeDetect, pRect ) ); +} + +// Loop through to super class, no virtual Methods to not become incompatible +// due to IF changes + +const Graphic& SvxContourDlg::GetGraphic() const +{ + return m_xImpl->GetGraphic(); +} + +bool SvxContourDlg::IsGraphicChanged() const +{ + return m_xImpl->IsGraphicChanged(); +} + +tools::PolyPolygon SvxContourDlg::GetPolyPolygon() +{ + return m_xImpl->GetPolyPolygon(); +} + +const void* SvxContourDlg::GetEditingObject() const +{ + return m_xImpl->GetEditingObject(); +} + +void SvxContourDlg::Update( const Graphic& rGraphic, bool bGraphicLinked, + const tools::PolyPolygon* pPolyPoly, void* pEditingObj ) +{ + m_xImpl->UpdateGraphic( rGraphic, bGraphicLinked, pPolyPoly, pEditingObj ); +} + +SvxSuperContourDlg::SvxSuperContourDlg(weld::Builder& rBuilder, + weld::Dialog& rDialog, SfxBindings* pBindings) + : aUpdateIdle( "SvxSuperContourDlg UpdateIdle" ) + , aCreateIdle( "SvxSuperContourDlg CreateIdle" ) + , mpBindings(pBindings) + , pUpdateEditingObject( nullptr ) + , pCheckObj( nullptr ) + , aContourItem( *this, *pBindings ) + , mnGrfChanged( 0 ) + , bExecState( false ) + , bUpdateGraphicLinked( false ) + , bGraphicLinked( false ) + , m_rDialog(rDialog) + , m_xContourWnd(new ContourWindow(&rDialog)) + , m_xStbStatusColor(new StatusColor(*m_xContourWnd)) + , m_xTbx1(rBuilder.weld_toolbar("toolbar")) + , m_xMtfTolerance(rBuilder.weld_metric_spin_button("spinbutton", FieldUnit::PERCENT)) + , m_xStbStatus2(rBuilder.weld_label("statuspos")) + , m_xStbStatus3(rBuilder.weld_label("statussize")) + , m_xCancelBtn(rBuilder.weld_button("cancel")) + , m_xStbStatusColorWeld(new weld::CustomWeld(rBuilder, "statuscolor", *m_xStbStatusColor)) + , m_xContourWndWeld(new weld::CustomWeld(rBuilder, "container", *m_xContourWnd)) +{ + m_xCancelBtn->connect_clicked(LINK(this, SvxSuperContourDlg, CancelHdl)); + + m_xContourWnd->SetMousePosLink( LINK( this, SvxSuperContourDlg, MousePosHdl ) ); + m_xContourWnd->SetGraphSizeLink( LINK( this, SvxSuperContourDlg, GraphSizeHdl ) ); + m_xContourWnd->SetUpdateLink( LINK( this, SvxSuperContourDlg, StateHdl ) ); + m_xContourWnd->SetPipetteHdl( LINK( this, SvxSuperContourDlg, PipetteHdl ) ); + m_xContourWnd->SetPipetteClickHdl( LINK( this, SvxSuperContourDlg, PipetteClickHdl ) ); + m_xContourWnd->SetWorkplaceClickHdl( LINK( this, SvxSuperContourDlg, WorkplaceClickHdl ) ); + + m_xTbx1->connect_clicked( LINK( this, SvxSuperContourDlg, Tbx1ClickHdl ) ); + + m_xMtfTolerance->set_value(10, FieldUnit::PERCENT); + + aUpdateIdle.SetInvokeHandler( LINK( this, SvxSuperContourDlg, UpdateHdl ) ); + + aCreateIdle.SetPriority( TaskPriority::RESIZE ); + aCreateIdle.SetInvokeHandler( LINK( this, SvxSuperContourDlg, CreateHdl ) ); +} + +SvxSuperContourDlg::~SvxSuperContourDlg() +{ + m_xContourWnd->SetUpdateLink( Link<GraphCtrl*,void>() ); + m_xContourWnd.reset(); +} + +IMPL_LINK_NOARG(SvxSuperContourDlg, CancelHdl, weld::Button&, void) +{ + bool bRet = true; + + if (m_xTbx1->get_item_sensitive("TBI_APPLY")) + { + std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(&m_rDialog, "svx/ui/querysavecontchangesdialog.ui")); + std::unique_ptr<weld::MessageDialog> xQBox(xBuilder->weld_message_dialog("QuerySaveContourChangesDialog")); + const short nRet = xQBox->run(); + + if ( nRet == RET_YES ) + { + SfxBoolItem aBoolItem( SID_CONTOUR_EXEC, true ); + GetBindings().GetDispatcher()->ExecuteList( + SID_CONTOUR_EXEC, SfxCallMode::SYNCHRON | SfxCallMode::RECORD, + { &aBoolItem }); + } + else if ( nRet == RET_CANCEL ) + bRet = false; + } + + if (bRet) + m_rDialog.response(RET_CANCEL); +} + +// Enabled or disabled all Controls + +void SvxSuperContourDlg::SetExecState( bool bEnable ) +{ + bExecState = bEnable; +} + +void SvxSuperContourDlg::SetGraphic( const Graphic& rGraphic ) +{ + aUndoGraphic = aRedoGraphic = Graphic(); + aGraphic = rGraphic; + mnGrfChanged = 0; + m_xContourWnd->SetGraphic( aGraphic ); +} + +void SvxSuperContourDlg::SetPolyPolygon( const tools::PolyPolygon& rPolyPoly ) +{ + DBG_ASSERT( m_xContourWnd->GetGraphic().GetType() != GraphicType::NONE, "Graphic must've been set first!" ); + + tools::PolyPolygon aPolyPoly( rPolyPoly ); + const MapMode aMap100( MapUnit::Map100thMM ); + const MapMode aGrfMap( aGraphic.GetPrefMapMode() ); + OutputDevice* pOutDev = Application::GetDefaultDevice(); + bool bPixelMap = aGrfMap.GetMapUnit() == MapUnit::MapPixel; + + for ( sal_uInt16 j = 0, nPolyCount = aPolyPoly.Count(); j < nPolyCount; j++ ) + { + tools::Polygon& rPoly = aPolyPoly[ j ]; + + for ( sal_uInt16 i = 0, nCount = rPoly.GetSize(); i < nCount; i++ ) + { + Point& rPt = rPoly[ i ]; + + if ( !bPixelMap ) + rPt = pOutDev->LogicToPixel( rPt, aGrfMap ); + + rPt = pOutDev->PixelToLogic( rPt, aMap100 ); + } + } + + m_xContourWnd->SetPolyPolygon( aPolyPoly ); + m_xContourWnd->GetSdrModel()->SetChanged(); +} + +tools::PolyPolygon SvxSuperContourDlg::GetPolyPolygon() +{ + tools::PolyPolygon aRetPolyPoly( m_xContourWnd->GetPolyPolygon() ); + + const MapMode aMap100( MapUnit::Map100thMM ); + const MapMode aGrfMap( aGraphic.GetPrefMapMode() ); + OutputDevice* pOutDev = Application::GetDefaultDevice(); + bool bPixelMap = aGrfMap.GetMapUnit() == MapUnit::MapPixel; + + for ( sal_uInt16 j = 0, nPolyCount = aRetPolyPoly.Count(); j < nPolyCount; j++ ) + { + tools::Polygon& rPoly = aRetPolyPoly[ j ]; + + for ( sal_uInt16 i = 0, nCount = rPoly.GetSize(); i < nCount; i++ ) + { + Point& rPt = rPoly[ i ]; + + rPt = pOutDev->LogicToPixel( rPt, aMap100 ); + + if ( !bPixelMap ) + rPt = pOutDev->PixelToLogic( rPt, aGrfMap ); + } + } + + return aRetPolyPoly; +} + +void SvxSuperContourDlg::UpdateGraphic( const Graphic& rGraphic, bool _bGraphicLinked, + const tools::PolyPolygon* pPolyPoly, void* pEditingObj ) +{ + aUpdateGraphic = rGraphic; + bUpdateGraphicLinked = _bGraphicLinked; + pUpdateEditingObject = pEditingObj; + + if ( pPolyPoly ) + aUpdatePolyPoly = *pPolyPoly; + else + aUpdatePolyPoly = tools::PolyPolygon(); + + aUpdateIdle.Start(); +} + +// Click handler for ToolBox + +IMPL_LINK(SvxSuperContourDlg, Tbx1ClickHdl, const OString&, rId, void) +{ + if (rId == "TBI_APPLY") + { + SfxBoolItem aBoolItem( SID_CONTOUR_EXEC, true ); + GetBindings().GetDispatcher()->ExecuteList( + SID_CONTOUR_EXEC, SfxCallMode::ASYNCHRON | SfxCallMode::RECORD, + { &aBoolItem }); + } + else if (rId == "TBI_WORKPLACE") + { + if (m_xTbx1->get_item_active("TBI_WORKPLACE")) + { + std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(&m_rDialog, "svx/ui/querydeletecontourdialog.ui")); + std::unique_ptr<weld::MessageDialog> xQBox(xBuilder->weld_message_dialog("QueryDeleteContourDialog")); + + if (!m_xContourWnd->IsContourChanged() || (xQBox->run() == RET_YES)) + m_xContourWnd->SetWorkplaceMode( true ); + else + m_xTbx1->set_item_active("TBI_WORKPLACE", false); + } + else + m_xContourWnd->SetWorkplaceMode( false ); + } + else if (rId == "TBI_SELECT") + { + SetActiveTool(rId); + m_xContourWnd->SetEditMode( true ); + } + else if (rId == "TBI_RECT") + { + SetActiveTool(rId); + m_xContourWnd->SetObjKind( OBJ_RECT ); + } + else if (rId == "TBI_CIRCLE") + { + SetActiveTool(rId); + m_xContourWnd->SetObjKind( OBJ_CIRC ); + } + else if (rId == "TBI_POLY") + { + SetActiveTool(rId); + m_xContourWnd->SetObjKind( OBJ_POLY ); + } + else if (rId == "TBI_POLYEDIT") + { + m_xContourWnd->SetPolyEditMode(m_xTbx1->get_item_active("TBI_POLYEDIT") ? SID_BEZIER_MOVE : 0); + } + else if (rId == "TBI_POLYMOVE") + { + SetActivePoly(rId); + m_xContourWnd->SetPolyEditMode( SID_BEZIER_MOVE ); + } + else if (rId == "TBI_POLYINSERT") + { + SetActivePoly(rId); + m_xContourWnd->SetPolyEditMode( SID_BEZIER_INSERT ); + } + else if (rId == "TBI_POLYDELETE") + { + m_xContourWnd->GetSdrView()->DeleteMarkedPoints(); + } + else if (rId == "TBI_UNDO") + { + mnGrfChanged = mnGrfChanged ? mnGrfChanged - 1 : 0; + aRedoGraphic = aGraphic; + aGraphic = aUndoGraphic; + aUndoGraphic = Graphic(); + m_xContourWnd->SetGraphic( aGraphic, false ); + } + else if (rId == "TBI_REDO") + { + mnGrfChanged++; + aUndoGraphic = aGraphic; + aGraphic = aRedoGraphic; + aRedoGraphic = Graphic(); + m_xContourWnd->SetGraphic( aGraphic, false ); + } + else if (rId == "TBI_AUTOCONTOUR") + { + aCreateIdle.Start(); + } + else if (rId == "TBI_PIPETTE") + { + bool bPipette = m_xTbx1->get_item_active("TBI_PIPETTE"); + + if ( !bPipette ) + m_xStbStatusColor->Invalidate(); + else if ( bGraphicLinked ) + { + std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(&m_rDialog, "svx/ui/queryunlinkgraphicsdialog.ui")); + std::unique_ptr<weld::MessageDialog> xQBox(xBuilder->weld_message_dialog("QueryUnlinkGraphicsDialog")); + + if (xQBox->run() != RET_YES) + { + bPipette = false; + m_xTbx1->set_item_active("TBI_PIPETTE", bPipette); + m_xStbStatusColor->Invalidate(); + } + } + + m_xContourWnd->SetPipetteMode( bPipette ); + } + m_xContourWnd->QueueIdleUpdate(); +} + +void SvxSuperContourDlg::SetActiveTool(const OString& rId) +{ + m_xTbx1->set_item_active("TBI_SELECT", rId == "TBI_SELECT"); + m_xTbx1->set_item_active("TBI_RECT", rId == "TBI_RECT"); + m_xTbx1->set_item_active("TBI_CIRCLE", rId == "TBI_CIRCLE"); + m_xTbx1->set_item_active("TBI_POLY", rId == "TBI_POLY"); +} + +void SvxSuperContourDlg::SetActivePoly(const OString& rId) +{ + m_xTbx1->set_item_active("TBI_POLYMOVE", rId == "TBI_POLYMOVE"); + m_xTbx1->set_item_active("TBI_POLYINSERT", rId == "TBI_POLYINSERT"); +} + +IMPL_LINK( SvxSuperContourDlg, MousePosHdl, GraphCtrl*, pWnd, void ) +{ + OUString aStr; + const FieldUnit eFieldUnit = GetBindings().GetDispatcher()->GetModule()->GetFieldUnit(); + const Point& rMousePos = pWnd->GetMousePos(); + const LocaleDataWrapper& rLocaleWrapper( Application::GetSettings().GetLocaleDataWrapper() ); + const sal_Unicode cSep = rLocaleWrapper.getNumDecimalSep()[0]; + + aStr = GetUnitString( rMousePos.X(), eFieldUnit, cSep ) + + " / " + + GetUnitString( rMousePos.Y(), eFieldUnit, cSep ); + + m_xStbStatus2->set_label( aStr ); +} + +IMPL_LINK( SvxSuperContourDlg, GraphSizeHdl, GraphCtrl*, pWnd, void ) +{ + OUString aStr; + const FieldUnit eFieldUnit = GetBindings().GetDispatcher()->GetModule()->GetFieldUnit(); + const Size& rSize = pWnd->GetGraphicSize(); + const LocaleDataWrapper& rLocaleWrapper( Application::GetSettings().GetLocaleDataWrapper() ); + const sal_Unicode cSep = rLocaleWrapper.getNumDecimalSep()[0]; + + aStr = GetUnitString( rSize.Width(), eFieldUnit, cSep ) + + " x " + + GetUnitString( rSize.Height(), eFieldUnit, cSep ); + + m_xStbStatus3->set_label( aStr ); +} + +IMPL_LINK_NOARG(SvxSuperContourDlg, UpdateHdl, Timer *, void) +{ + aUpdateIdle.Stop(); + + if ( pUpdateEditingObject != pCheckObj ) + { + if( !GetEditingObject() ) + m_xContourWnd->GrabFocus(); + + SetGraphic( aUpdateGraphic ); + SetPolyPolygon( aUpdatePolyPoly ); + pCheckObj = pUpdateEditingObject; + bGraphicLinked = bUpdateGraphicLinked; + + aUpdateGraphic = Graphic(); + aUpdatePolyPoly = tools::PolyPolygon(); + bUpdateGraphicLinked = false; + + m_xContourWnd->GetSdrModel()->SetChanged( false ); + } + + GetBindings().Invalidate( SID_CONTOUR_EXEC ); + m_xContourWnd->QueueIdleUpdate(); +} + +IMPL_LINK_NOARG(SvxSuperContourDlg, CreateHdl, Timer *, void) +{ + aCreateIdle.Stop(); + + const tools::Rectangle aWorkRect = m_xContourWnd->GetDrawingArea()->get_ref_device().LogicToPixel( + m_xContourWnd->GetWorkRect(), MapMode( MapUnit::Map100thMM)); + + const Graphic& rGraphic = m_xContourWnd->GetGraphic(); + const bool bValid = aWorkRect.Left() != aWorkRect.Right() && aWorkRect.Top() != aWorkRect.Bottom(); + + weld::WaitObject aWaitObj(&m_rDialog); + SetPolyPolygon( SvxContourDlg::CreateAutoContour( rGraphic, bValid ? &aWorkRect : nullptr ) ); +} + +IMPL_LINK( SvxSuperContourDlg, StateHdl, GraphCtrl*, pWnd, void ) +{ + const SdrObject* pObj = pWnd->GetSelectedSdrObject(); + const SdrView* pView = pWnd->GetSdrView(); + const bool bPolyEdit = ( pObj != nullptr ) && dynamic_cast<const SdrPathObj*>( pObj) != nullptr; + const bool bDrawEnabled = !(bPolyEdit && m_xTbx1->get_item_active("TBI_POLYEDIT")); + const bool bPipette = m_xTbx1->get_item_active("TBI_PIPETTE"); + const bool bWorkplace = m_xTbx1->get_item_active("TBI_WORKPLACE"); + const bool bDontHide = !( bPipette || bWorkplace ); + const bool bBitmap = pWnd->GetGraphic().GetType() == GraphicType::Bitmap; + + m_xTbx1->set_item_sensitive("TBI_APPLY", bDontHide && bExecState && pWnd->IsChanged()); + + m_xTbx1->set_item_sensitive("TBI_WORKPLACE", !bPipette && bDrawEnabled); + + m_xTbx1->set_item_sensitive("TBI_SELECT", bDontHide && bDrawEnabled); + m_xTbx1->set_item_sensitive("TBI_RECT", bDontHide && bDrawEnabled); + m_xTbx1->set_item_sensitive("TBI_CIRCLE", bDontHide && bDrawEnabled); + m_xTbx1->set_item_sensitive("TBI_POLY", bDontHide && bDrawEnabled); + + m_xTbx1->set_item_sensitive("TBI_POLYEDIT", bDontHide && bPolyEdit); + m_xTbx1->set_item_sensitive("TBI_POLYMOVE", bDontHide && !bDrawEnabled); + m_xTbx1->set_item_sensitive("TBI_POLYINSERT", bDontHide && !bDrawEnabled); + m_xTbx1->set_item_sensitive("TBI_POLYDELETE", bDontHide && !bDrawEnabled && pView->IsDeleteMarkedPointsPossible()); + + m_xTbx1->set_item_sensitive("TBI_AUTOCONTOUR", bDontHide && bDrawEnabled); + m_xTbx1->set_item_sensitive("TBI_PIPETTE", !bWorkplace && bDrawEnabled && bBitmap); + + m_xTbx1->set_item_sensitive("TBI_UNDO", bDontHide && aUndoGraphic.GetType() != GraphicType::NONE); + m_xTbx1->set_item_sensitive("TBI_REDO", bDontHide && aRedoGraphic.GetType() != GraphicType::NONE); + + if ( bPolyEdit ) + { + switch( pWnd->GetPolyEditMode() ) + { + case SID_BEZIER_MOVE: + SetActivePoly("TBI_POLYMOVE"); + break; + case SID_BEZIER_INSERT: + SetActivePoly("TBI_POLYINSERT"); + break; + default: + break; + } + } + else + { + m_xTbx1->set_item_active("TBI_POLYEDIT", false); + SetActivePoly("TBI_POLYMOVE"); + pWnd->SetPolyEditMode( 0 ); + } +} + +IMPL_LINK_NOARG(SvxSuperContourDlg, PipetteHdl, ContourWindow&, void) +{ + m_xStbStatusColor->Invalidate(); +} + +void StatusColor::Paint(vcl::RenderContext& rDevice, const tools::Rectangle&) +{ + const Color& rOldLineColor = rDevice.GetLineColor(); + const Color& rOldFillColor = rDevice.GetFillColor(); + + tools::Rectangle aRect(Point(), GetOutputSizePixel()); + const Color& rColor = m_rWnd.GetPipetteColor(); + + rDevice.SetLineColor(rColor); + rDevice.SetFillColor(rColor); + + aRect.AdjustLeft(4 ); + aRect.AdjustTop(4 ); + aRect.AdjustRight( -4 ); + aRect.AdjustBottom( -4 ); + + rDevice.DrawRect( aRect ); + + rDevice.SetLineColor(rOldLineColor); + rDevice.SetFillColor(rOldFillColor); +} + +IMPL_LINK( SvxSuperContourDlg, PipetteClickHdl, ContourWindow&, rWnd, void ) +{ + if ( rWnd.IsClickValid() ) + { + const Color& rColor = rWnd.GetPipetteColor(); + + weld::WaitObject aWaitObj(&m_rDialog); + + if( aGraphic.GetType() == GraphicType::Bitmap ) + { + const long nTol = static_cast<long>(m_xMtfTolerance->get_value(FieldUnit::PERCENT) * 255 / 100); + + Bitmap aMask = aGraphic.GetBitmapEx().GetBitmap().CreateMask( rColor, nTol ); + + if( aGraphic.IsTransparent() ) + aMask.CombineSimple( aGraphic.GetBitmapEx().GetMask(), BmpCombine::Or ); + + if( !!aMask ) + { + std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(&m_rDialog, "svx/ui/querynewcontourdialog.ui")); + std::unique_ptr<weld::MessageDialog> xQBox(xBuilder->weld_message_dialog("QueryNewContourDialog")); + + bool bNewContour; + + aRedoGraphic = Graphic(); + aUndoGraphic = aGraphic; + Bitmap aBmp = aGraphic.GetBitmapEx().GetBitmap(); + aGraphic = Graphic( BitmapEx( aBmp, aMask ) ); + mnGrfChanged++; + + bNewContour = (xQBox->run() == RET_YES); + rWnd.SetGraphic( aGraphic, bNewContour ); + + if( bNewContour ) + aCreateIdle.Start(); + } + } + } + + m_xTbx1->set_item_active("TBI_PIPETTE", false); + rWnd.SetPipetteMode( false ); + m_xStbStatusColor->Invalidate(); +} + +IMPL_LINK( SvxSuperContourDlg, WorkplaceClickHdl, ContourWindow&, rWnd, void ) +{ + m_xTbx1->set_item_active("TBI_WORKPLACE", false); + m_xTbx1->set_item_active("TBI_SELECT", true); + rWnd.SetWorkplaceMode( false ); + + m_xContourWnd->QueueIdleUpdate(); +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |