diff options
Diffstat (limited to 'vcl/unx/generic/printer/printerinfomanager.cxx')
| -rw-r--r-- | vcl/unx/generic/printer/printerinfomanager.cxx | 900 |
1 files changed, 900 insertions, 0 deletions
diff --git a/vcl/unx/generic/printer/printerinfomanager.cxx b/vcl/unx/generic/printer/printerinfomanager.cxx new file mode 100644 index 000000000..ff4b5e691 --- /dev/null +++ b/vcl/unx/generic/printer/printerinfomanager.cxx @@ -0,0 +1,900 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <unx/cpdmgr.hxx> +#include <unx/cupsmgr.hxx> +#include <unx/helper.hxx> + +#include <saldatabasic.hxx> + +#include <tools/urlobj.hxx> +#include <tools/config.hxx> + +#include <i18nutil/paper.hxx> +#include <rtl/strbuf.hxx> +#include <sal/log.hxx> + +#include <osl/file.hxx> +#include <osl/thread.hxx> +#include <osl/mutex.hxx> + +// filename of configuration files +#define PRINT_FILENAME "psprint.conf" +// the group of the global defaults +#define GLOBAL_DEFAULTS_GROUP "__Global_Printer_Defaults__" + +#include <cstddef> +#include <unordered_set> + +using namespace psp; +using namespace osl; + +namespace psp +{ + class SystemQueueInfo final : public Thread + { + mutable Mutex m_aMutex; + bool m_bChanged; + std::vector< PrinterInfoManager::SystemPrintQueue > + m_aQueues; + OUString m_aCommand; + + virtual void SAL_CALL run() override; + + public: + SystemQueueInfo(); + virtual ~SystemQueueInfo() override; + + bool hasChanged() const; + OUString getCommand() const; + + // sets changed status to false; therefore not const + void getSystemQueues( std::vector< PrinterInfoManager::SystemPrintQueue >& rQueues ); + }; +} // namespace + +/* +* class PrinterInfoManager +*/ + +PrinterInfoManager& PrinterInfoManager::get() +{ + SalData* pSalData = GetSalData(); + + if( ! pSalData->m_pPIManager ) + { + pSalData->m_pPIManager = CPDManager::tryLoadCPD(); + if( ! pSalData->m_pPIManager ) + pSalData->m_pPIManager = CUPSManager::tryLoadCUPS(); + if( ! pSalData->m_pPIManager ) + pSalData->m_pPIManager = new PrinterInfoManager(); + pSalData->m_pPIManager->initialize(); +#if OSL_DEBUG_LEVEL > 1 + SAL_INFO("vcl.unx.print", "PrinterInfoManager::get " + << "create Manager of type " + << ((int) pSalData->m_pPIManager->getType())); +#endif + } + + return *pSalData->m_pPIManager; +} + +void PrinterInfoManager::release() +{ + SalData* pSalData = GetSalData(); + delete pSalData->m_pPIManager; + pSalData->m_pPIManager = nullptr; +} + +PrinterInfoManager::PrinterInfoManager( Type eType ) : + m_eType( eType ), + m_bUseIncludeFeature( false ), + m_bUseJobPatch( true ), + m_aSystemDefaultPaper( "A4" ) +{ + if( eType == Type::Default ) + m_pQueueInfo.reset( new SystemQueueInfo ); + + m_aSystemDefaultPaper = OStringToOUString( + PaperInfo::toPSName(PaperInfo::getSystemDefaultPaper().getPaper()), + RTL_TEXTENCODING_UTF8); +} + +PrinterInfoManager::~PrinterInfoManager() +{ +#if OSL_DEBUG_LEVEL > 1 + SAL_INFO("vcl.unx.print", "PrinterInfoManager: " + << "destroyed Manager of type " + << ((int) getType())); +#endif +} + +bool PrinterInfoManager::checkPrintersChanged( bool bWait ) +{ + // check if files were created, deleted or modified since initialize() + bool bChanged = false; + for (auto const& watchFile : m_aWatchFiles) + { + DirectoryItem aItem; + if( DirectoryItem::get( watchFile.m_aFilePath, aItem ) ) + { + if( watchFile.m_aModified.Seconds != 0 ) + { + bChanged = true; // file probably has vanished + break; + } + } + else + { + FileStatus aStatus( osl_FileStatus_Mask_ModifyTime ); + if( aItem.getFileStatus( aStatus ) ) + { + bChanged = true; // unlikely but not impossible + break; + } + else + { + TimeValue aModified = aStatus.getModifyTime(); + if( aModified.Seconds != watchFile.m_aModified.Seconds ) + { + bChanged = true; + break; + } + } + } + } + + if( bWait && m_pQueueInfo ) + { +#if OSL_DEBUG_LEVEL > 1 + SAL_INFO("vcl.unx.print", "syncing printer discovery thread."); +#endif + m_pQueueInfo->join(); +#if OSL_DEBUG_LEVEL > 1 + SAL_INFO("vcl.unx.print", "done: syncing printer discovery thread."); +#endif + } + + if( ! bChanged && m_pQueueInfo ) + bChanged = m_pQueueInfo->hasChanged(); + if( bChanged ) + { + initialize(); + } + + return bChanged; +} + +void PrinterInfoManager::initialize() +{ + m_bUseIncludeFeature = false; + m_aPrinters.clear(); + m_aWatchFiles.clear(); + OUString aDefaultPrinter; + + // first initialize the global defaults + // have to iterate over all possible files + // there should be only one global setup section in all + // available config files + m_aGlobalDefaults = PrinterInfo(); + + // need a parser for the PPDContext. generic printer should do. + m_aGlobalDefaults.m_pParser = PPDParser::getParser( "SGENPRT" ); + m_aGlobalDefaults.m_aContext.setParser( m_aGlobalDefaults.m_pParser ); + + if( ! m_aGlobalDefaults.m_pParser ) + { +#if OSL_DEBUG_LEVEL > 1 + SAL_INFO("vcl.unx.print", "Error: no default PPD file " + << "SGENPRT available, shutting down psprint..."); +#endif + return; + } + + std::vector< OUString > aDirList; + psp::getPrinterPathList( aDirList, nullptr ); + for (auto const& printDir : aDirList) + { + INetURLObject aFile( printDir, INetProtocol::File, INetURLObject::EncodeMechanism::All ); + aFile.Append( PRINT_FILENAME ); + Config aConfig( aFile.PathToFileName() ); + if( aConfig.HasGroup( GLOBAL_DEFAULTS_GROUP ) ) + { +#if OSL_DEBUG_LEVEL > 1 + SAL_INFO("vcl.unx.print", "found global defaults in " + << aFile.PathToFileName()); +#endif + aConfig.SetGroup( GLOBAL_DEFAULTS_GROUP ); + + OString aValue( aConfig.ReadKey( "Copies" ) ); + if (!aValue.isEmpty()) + m_aGlobalDefaults.m_nCopies = aValue.toInt32(); + + aValue = aConfig.ReadKey( "Orientation" ); + if (!aValue.isEmpty()) + m_aGlobalDefaults.m_eOrientation = aValue.equalsIgnoreAsciiCase("Landscape") ? orientation::Landscape : orientation::Portrait; + + aValue = aConfig.ReadKey( "MarginAdjust" ); + if (!aValue.isEmpty()) + { + sal_Int32 nIdx {0}; + m_aGlobalDefaults.m_nLeftMarginAdjust = aValue.getToken(0, ',', nIdx).toInt32(); + m_aGlobalDefaults.m_nRightMarginAdjust = aValue.getToken(0, ',', nIdx).toInt32(); + m_aGlobalDefaults.m_nTopMarginAdjust = aValue.getToken(0, ',', nIdx).toInt32(); + m_aGlobalDefaults.m_nBottomMarginAdjust = aValue.getToken(0, ',', nIdx).toInt32(); + } + + aValue = aConfig.ReadKey( "ColorDepth", "24" ); + if (!aValue.isEmpty()) + m_aGlobalDefaults.m_nColorDepth = aValue.toInt32(); + + aValue = aConfig.ReadKey( "ColorDevice" ); + if (!aValue.isEmpty()) + m_aGlobalDefaults.m_nColorDevice = aValue.toInt32(); + + aValue = aConfig.ReadKey( "PSLevel" ); + if (!aValue.isEmpty()) + m_aGlobalDefaults.m_nPSLevel = aValue.toInt32(); + + aValue = aConfig.ReadKey( "PDFDevice" ); + if (!aValue.isEmpty()) + m_aGlobalDefaults.m_nPDFDevice = aValue.toInt32(); + + // get the PPDContext of global JobData + for( int nKey = 0; nKey < aConfig.GetKeyCount(); ++nKey ) + { + OString aKey( aConfig.GetKeyName( nKey ) ); + if (aKey.startsWith("PPD_")) + { + aValue = aConfig.ReadKey( aKey ); + const PPDKey* pKey = m_aGlobalDefaults.m_pParser->getKey(OStringToOUString(aKey.copy(4), RTL_TEXTENCODING_ISO_8859_1)); + if( pKey ) + { + m_aGlobalDefaults.m_aContext. + setValue( pKey, + aValue == "*nil" ? nullptr : pKey->getValue(OStringToOUString(aValue, RTL_TEXTENCODING_ISO_8859_1)), + true ); + } + } + } + } + } + setDefaultPaper( m_aGlobalDefaults.m_aContext ); + + // now collect all available printers + for (auto const& printDir : aDirList) + { + INetURLObject aDir( printDir, INetProtocol::File, INetURLObject::EncodeMechanism::All ); + INetURLObject aFile( aDir ); + aFile.Append( PRINT_FILENAME ); + + // check directory validity + OUString aUniPath; + FileBase::getFileURLFromSystemPath( aDir.PathToFileName(), aUniPath ); + Directory aDirectory( aUniPath ); + if( aDirectory.open() ) + continue; + aDirectory.close(); + + FileBase::getFileURLFromSystemPath( aFile.PathToFileName(), aUniPath ); + FileStatus aStatus( osl_FileStatus_Mask_ModifyTime ); + DirectoryItem aItem; + + // setup WatchFile list + WatchFile aWatchFile; + aWatchFile.m_aFilePath = aUniPath; + if( ! DirectoryItem::get( aUniPath, aItem ) && + ! aItem.getFileStatus( aStatus ) ) + { + aWatchFile.m_aModified = aStatus.getModifyTime(); + } + else + { + aWatchFile.m_aModified.Seconds = 0; + aWatchFile.m_aModified.Nanosec = 0; + } + m_aWatchFiles.push_back( aWatchFile ); + + Config aConfig( aFile.PathToFileName() ); + for( int nGroup = 0; nGroup < aConfig.GetGroupCount(); nGroup++ ) + { + aConfig.SetGroup( aConfig.GetGroupName( nGroup ) ); + OString aValue = aConfig.ReadKey( "Printer" ); + if (!aValue.isEmpty()) + { + OUString aPrinterName; + + sal_Int32 nNamePos = aValue.indexOf('/'); + // check for valid value of "Printer" + if (nNamePos == -1) + continue; + + Printer aPrinter; + // initialize to global defaults + aPrinter.m_aInfo = m_aGlobalDefaults; + + aPrinterName = OStringToOUString(aValue.copy(nNamePos+1), + RTL_TEXTENCODING_UTF8); + aPrinter.m_aInfo.m_aPrinterName = aPrinterName; + aPrinter.m_aInfo.m_aDriverName = OStringToOUString(aValue.copy(0, nNamePos), RTL_TEXTENCODING_UTF8); + + // set parser, merge settings + // don't do this for CUPS printers as this is done + // by the CUPS system itself + if( !aPrinter.m_aInfo.m_aDriverName.startsWith( "CUPS:" ) ) + { + aPrinter.m_aInfo.m_pParser = PPDParser::getParser( aPrinter.m_aInfo.m_aDriverName ); + aPrinter.m_aInfo.m_aContext.setParser( aPrinter.m_aInfo.m_pParser ); + // note: setParser also purges the context + + // ignore this printer if its driver is not found + if( ! aPrinter.m_aInfo.m_pParser ) + continue; + + // merge the ppd context keys if the printer has the same keys and values + // this is a bit tricky, since it involves mixing two PPDs + // without constraints which might end up badly + // this feature should be use with caution + // it is mainly to select default paper sizes for new printers + for( std::size_t nPPDValueModified = 0; nPPDValueModified < m_aGlobalDefaults.m_aContext.countValuesModified(); nPPDValueModified++ ) + { + const PPDKey* pDefKey = m_aGlobalDefaults.m_aContext.getModifiedKey( nPPDValueModified ); + const PPDValue* pDefValue = m_aGlobalDefaults.m_aContext.getValue( pDefKey ); + const PPDKey* pPrinterKey = pDefKey ? aPrinter.m_aInfo.m_pParser->getKey( pDefKey->getKey() ) : nullptr; + if( pDefKey && pPrinterKey ) + // at least the options exist in both PPDs + { + if( pDefValue ) + { + const PPDValue* pPrinterValue = pPrinterKey->getValue( pDefValue->m_aOption ); + if( pPrinterValue ) + // the printer has a corresponding option for the key + aPrinter.m_aInfo.m_aContext.setValue( pPrinterKey, pPrinterValue ); + } + else + aPrinter.m_aInfo.m_aContext.setValue( pPrinterKey, nullptr ); + } + } + + aValue = aConfig.ReadKey( "Command" ); + // no printer without a command + if (aValue.isEmpty()) + { + /* TODO: + * porters: please append your platform to the Solaris + * case if your platform has SystemV printing per default. + */ + #if defined __sun + aValue = "lp"; + #else + aValue = "lpr"; + #endif + } + aPrinter.m_aInfo.m_aCommand = OStringToOUString(aValue, RTL_TEXTENCODING_UTF8); + } + + aValue = aConfig.ReadKey( "QuickCommand" ); + aPrinter.m_aInfo.m_aQuickCommand = OStringToOUString(aValue, RTL_TEXTENCODING_UTF8); + + aValue = aConfig.ReadKey( "Features" ); + aPrinter.m_aInfo.m_aFeatures = OStringToOUString(aValue, RTL_TEXTENCODING_UTF8); + + // override the settings in m_aGlobalDefaults if keys exist + aValue = aConfig.ReadKey( "DefaultPrinter" ); + if (aValue != "0" && !aValue.equalsIgnoreAsciiCase("false")) + aDefaultPrinter = aPrinterName; + + aValue = aConfig.ReadKey( "Location" ); + aPrinter.m_aInfo.m_aLocation = OStringToOUString(aValue, RTL_TEXTENCODING_UTF8); + + aValue = aConfig.ReadKey( "Comment" ); + aPrinter.m_aInfo.m_aComment = OStringToOUString(aValue, RTL_TEXTENCODING_UTF8); + + aValue = aConfig.ReadKey( "Copies" ); + if (!aValue.isEmpty()) + aPrinter.m_aInfo.m_nCopies = aValue.toInt32(); + + aValue = aConfig.ReadKey( "Orientation" ); + if (!aValue.isEmpty()) + aPrinter.m_aInfo.m_eOrientation = aValue.equalsIgnoreAsciiCase("Landscape") ? orientation::Landscape : orientation::Portrait; + + aValue = aConfig.ReadKey( "MarginAdjust" ); + if (!aValue.isEmpty()) + { + sal_Int32 nIdx {0}; + aPrinter.m_aInfo.m_nLeftMarginAdjust = aValue.getToken(0, ',', nIdx).toInt32(); + aPrinter.m_aInfo.m_nRightMarginAdjust = aValue.getToken(0, ',', nIdx).toInt32(); + aPrinter.m_aInfo.m_nTopMarginAdjust = aValue.getToken(0, ',', nIdx).toInt32(); + aPrinter.m_aInfo.m_nBottomMarginAdjust = aValue.getToken(0, ',', nIdx).toInt32(); + } + + aValue = aConfig.ReadKey( "ColorDepth" ); + if (!aValue.isEmpty()) + aPrinter.m_aInfo.m_nColorDepth = aValue.toInt32(); + + aValue = aConfig.ReadKey( "ColorDevice" ); + if (!aValue.isEmpty()) + aPrinter.m_aInfo.m_nColorDevice = aValue.toInt32(); + + aValue = aConfig.ReadKey( "PSLevel" ); + if (!aValue.isEmpty()) + aPrinter.m_aInfo.m_nPSLevel = aValue.toInt32(); + + aValue = aConfig.ReadKey( "PDFDevice" ); + if (!aValue.isEmpty()) + aPrinter.m_aInfo.m_nPDFDevice = aValue.toInt32(); + + // now iterate over all keys to extract multi key information: + // 1. PPDContext information + for( int nKey = 0; nKey < aConfig.GetKeyCount(); ++nKey ) + { + OString aKey( aConfig.GetKeyName( nKey ) ); + if( aKey.startsWith("PPD_") && aPrinter.m_aInfo.m_pParser ) + { + aValue = aConfig.ReadKey( aKey ); + const PPDKey* pKey = aPrinter.m_aInfo.m_pParser->getKey(OStringToOUString(aKey.copy(4), RTL_TEXTENCODING_ISO_8859_1)); + if( pKey ) + { + aPrinter.m_aInfo.m_aContext. + setValue( pKey, + aValue == "*nil" ? nullptr : pKey->getValue(OStringToOUString(aValue, RTL_TEXTENCODING_ISO_8859_1)), + true ); + } + } + } + + setDefaultPaper( aPrinter.m_aInfo.m_aContext ); + + // if it's a "Generic Printer", apply defaults from config... + aPrinter.m_aInfo.resolveDefaultBackend(); + + // finally insert printer + FileBase::getFileURLFromSystemPath( aFile.PathToFileName(), aPrinter.m_aFile ); + std::unordered_map< OUString, Printer >::const_iterator find_it = + m_aPrinters.find( aPrinterName ); + if( find_it != m_aPrinters.end() ) + { + aPrinter.m_aAlternateFiles = find_it->second.m_aAlternateFiles; + aPrinter.m_aAlternateFiles.insert( find_it->second.m_aFile ); + } + m_aPrinters[ aPrinterName ] = aPrinter; + } + } + } + + // set default printer + if( !m_aPrinters.empty() ) + { + if( m_aPrinters.find( aDefaultPrinter ) == m_aPrinters.end() ) + aDefaultPrinter = m_aPrinters.begin()->first; + } + else + aDefaultPrinter.clear(); + m_aDefaultPrinter = aDefaultPrinter; + + if( m_eType != Type::Default ) + return; + + // add a default printer for every available print queue + // merge paper default printer, all else from global defaults + PrinterInfo aMergeInfo( m_aGlobalDefaults ); + aMergeInfo.m_aDriverName = "SGENPRT"; + aMergeInfo.m_aFeatures = "autoqueue"; + + if( !m_aDefaultPrinter.isEmpty() ) + { + PrinterInfo aDefaultInfo( getPrinterInfo( m_aDefaultPrinter ) ); + + const PPDKey* pDefKey = aDefaultInfo.m_pParser->getKey( "PageSize" ); + const PPDKey* pMergeKey = aMergeInfo.m_pParser->getKey( "PageSize" ); + const PPDValue* pDefValue = aDefaultInfo.m_aContext.getValue( pDefKey ); + const PPDValue* pMergeValue = pMergeKey ? pMergeKey->getValue( pDefValue->m_aOption ) : nullptr; + if( pMergeKey && pMergeValue ) + aMergeInfo.m_aContext.setValue( pMergeKey, pMergeValue ); + } + + if( m_pQueueInfo && m_pQueueInfo->hasChanged() ) + { + m_aSystemPrintCommand = m_pQueueInfo->getCommand(); + m_pQueueInfo->getSystemQueues( m_aSystemPrintQueues ); + m_pQueueInfo.reset(); + } + for (auto const& printQueue : m_aSystemPrintQueues) + { + OUString aPrinterName = "<" + printQueue.m_aQueue + ">"; + + if( m_aPrinters.find( aPrinterName ) != m_aPrinters.end() ) + // probably user made this one permanent + continue; + + OUString aCmd( m_aSystemPrintCommand ); + aCmd = aCmd.replaceAll( "(PRINTER)", printQueue.m_aQueue ); + + Printer aPrinter; + + // initialize to merged defaults + aPrinter.m_aInfo = aMergeInfo; + aPrinter.m_aInfo.m_aPrinterName = aPrinterName; + aPrinter.m_aInfo.m_aCommand = aCmd; + aPrinter.m_aInfo.m_aComment = printQueue.m_aComment; + aPrinter.m_aInfo.m_aLocation = printQueue.m_aLocation; + + m_aPrinters[ aPrinterName ] = aPrinter; + } +} + +void PrinterInfoManager::listPrinters( ::std::vector< OUString >& rVector ) const +{ + rVector.clear(); + for (auto const& printer : m_aPrinters) + rVector.push_back(printer.first); +} + +const PrinterInfo& PrinterInfoManager::getPrinterInfo( const OUString& rPrinter ) const +{ + static PrinterInfo aEmptyInfo; + std::unordered_map< OUString, Printer >::const_iterator it = m_aPrinters.find( rPrinter ); + + SAL_WARN_IF( it == m_aPrinters.end(), "vcl", "Do not ask for info about nonexistent printers" ); + + return it != m_aPrinters.end() ? it->second.m_aInfo : aEmptyInfo; +} + +bool PrinterInfoManager::checkFeatureToken( const OUString& rPrinterName, const char* pToken ) const +{ + const PrinterInfo& rPrinterInfo( getPrinterInfo( rPrinterName ) ); + sal_Int32 nIndex = 0; + while( nIndex != -1 ) + { + OUString aOuterToken = rPrinterInfo.m_aFeatures.getToken( 0, ',', nIndex ); + if( aOuterToken.getToken( 0, '=' ).equalsIgnoreAsciiCaseAscii( pToken ) ) + return true; + } + return false; +} + +FILE* PrinterInfoManager::startSpool( const OUString& rPrintername, bool bQuickCommand ) +{ + const PrinterInfo& rPrinterInfo = getPrinterInfo (rPrintername); + const OUString& rCommand = (bQuickCommand && !rPrinterInfo.m_aQuickCommand.isEmpty() ) ? + rPrinterInfo.m_aQuickCommand : rPrinterInfo.m_aCommand; + OString aShellCommand = OUStringToOString (rCommand, RTL_TEXTENCODING_ISO_8859_1) + + " 2>/dev/null"; + + return popen (aShellCommand.getStr(), "w"); +} + +bool PrinterInfoManager::endSpool( const OUString& /*rPrintername*/, const OUString& /*rJobTitle*/, FILE* pFile, const JobData& /*rDocumentJobData*/, bool /*bBanner*/, const OUString& /*rFaxNumber*/ ) +{ + return (0 == pclose( pFile )); +} + +void PrinterInfoManager::setupJobContextData( JobData& rData ) +{ + std::unordered_map< OUString, Printer >::iterator it = + m_aPrinters.find( rData.m_aPrinterName ); + if( it != m_aPrinters.end() ) + { + rData.m_pParser = it->second.m_aInfo.m_pParser; + rData.m_aContext = it->second.m_aInfo.m_aContext; + } +} + +void PrinterInfoManager::setDefaultPaper( PPDContext& rContext ) const +{ + if( ! rContext.getParser() ) + return; + + const PPDKey* pPageSizeKey = rContext.getParser()->getKey( "PageSize" ); + if( ! pPageSizeKey ) + return; + + std::size_t nModified = rContext.countValuesModified(); + auto set = false; + for (std::size_t i = 0; i != nModified; ++i) { + if (rContext.getModifiedKey(i) == pPageSizeKey) { + set = true; + break; + } + } + + if( set ) // paper was set already, do not modify + { +#if OSL_DEBUG_LEVEL > 1 + SAL_WARN("vcl.unx.print", "not setting default paper, already set " + << rContext.getValue( pPageSizeKey )->m_aOption); +#endif + return; + } + + // paper not set, fill in default value + const PPDValue* pPaperVal = nullptr; + int nValues = pPageSizeKey->countValues(); + for( int i = 0; i < nValues && ! pPaperVal; i++ ) + { + const PPDValue* pVal = pPageSizeKey->getValue( i ); + if( pVal->m_aOption.equalsIgnoreAsciiCase( m_aSystemDefaultPaper ) ) + pPaperVal = pVal; + } + if( pPaperVal ) + { +#if OSL_DEBUG_LEVEL > 1 + SAL_INFO("vcl.unx.print", "setting default paper " + << pPaperVal->m_aOption); +#endif + rContext.setValue( pPageSizeKey, pPaperVal ); +#if OSL_DEBUG_LEVEL > 1 + SAL_INFO("vcl.unx.print", "-> got paper " + << rContext.getValue( pPageSizeKey )->m_aOption); +#endif + } +} + +SystemQueueInfo::SystemQueueInfo() : + m_bChanged( false ) +{ + create(); +} + +SystemQueueInfo::~SystemQueueInfo() +{ + static const char* pNoSyncDetection = getenv( "SAL_DISABLE_SYNCHRONOUS_PRINTER_DETECTION" ); + if( ! pNoSyncDetection || !*pNoSyncDetection ) + join(); + else + terminate(); +} + +bool SystemQueueInfo::hasChanged() const +{ + MutexGuard aGuard( m_aMutex ); + bool bChanged = m_bChanged; + return bChanged; +} + +void SystemQueueInfo::getSystemQueues( std::vector< PrinterInfoManager::SystemPrintQueue >& rQueues ) +{ + MutexGuard aGuard( m_aMutex ); + rQueues = m_aQueues; + m_bChanged = false; +} + +OUString SystemQueueInfo::getCommand() const +{ + MutexGuard aGuard( m_aMutex ); + OUString aRet = m_aCommand; + return aRet; +} + +namespace { + +struct SystemCommandParameters; + +} + +typedef void(* tokenHandler)(const std::vector< OString >&, + std::vector< PrinterInfoManager::SystemPrintQueue >&, + const SystemCommandParameters*); + +namespace { + +struct SystemCommandParameters +{ + const char* pQueueCommand; + const char* pPrintCommand; + const char* pForeToken; + const char* pAftToken; + unsigned int nForeTokenCount; + tokenHandler pHandler; +}; + +} + +#if ! (defined(LINUX) || defined(NETBSD) || defined(FREEBSD) || defined(OPENBSD)) +static void lpgetSysQueueTokenHandler( + const std::vector< OString >& i_rLines, + std::vector< PrinterInfoManager::SystemPrintQueue >& o_rQueues, + const SystemCommandParameters* ) +{ + rtl_TextEncoding aEncoding = osl_getThreadTextEncoding(); + std::unordered_set< OUString > aUniqueSet; + std::unordered_set< OUString > aOnlySet; + aUniqueSet.insert( OUString( "_all" ) ); + aUniqueSet.insert( OUString( "_default" ) ); + + // the eventual "all" attribute of the "_all" queue tells us, which + // printers are to be used for this user at all + + // find _all: line + OString aAllLine( "_all:" ); + OString aAllAttr( "all=" ); + auto it = std::find_if(i_rLines.begin(), i_rLines.end(), + [&aAllLine](const OString& rLine) { return rLine.indexOf( aAllLine, 0 ) == 0; }); + if( it != i_rLines.end() ) + { + // now find the "all" attribute + ++it; + it = std::find_if(it, i_rLines.end(), + [&aAllAttr](const OString& rLine) { return WhitespaceToSpace( rLine ).startsWith( aAllAttr ); }); + if( it != i_rLines.end() ) + { + // insert the comma separated entries into the set of printers to use + OString aClean( WhitespaceToSpace( *it ) ); + sal_Int32 nPos = aAllAttr.getLength(); + while( nPos != -1 ) + { + OString aTok( aClean.getToken( 0, ',', nPos ) ); + if( !aTok.isEmpty() ) + aOnlySet.insert( OStringToOUString( aTok, aEncoding ) ); + } + } + } + + bool bInsertAttribute = false; + OString aDescrStr( "description=" ); + OString aLocStr( "location=" ); + for (auto const& line : i_rLines) + { + sal_Int32 nPos = 0; + // find the begin of a new printer section + nPos = line.indexOf( ':', 0 ); + if( nPos != -1 ) + { + OUString aSysQueue( OStringToOUString( line.copy( 0, nPos ), aEncoding ) ); + // do not insert duplicates (e.g. lpstat tends to produce such lines) + // in case there was a "_all" section, insert only those printer explicitly + // set in the "all" attribute + if( aUniqueSet.find( aSysQueue ) == aUniqueSet.end() && + ( aOnlySet.empty() || aOnlySet.find( aSysQueue ) != aOnlySet.end() ) + ) + { + o_rQueues.push_back( PrinterInfoManager::SystemPrintQueue() ); + o_rQueues.back().m_aQueue = aSysQueue; + o_rQueues.back().m_aLocation = aSysQueue; + aUniqueSet.insert( aSysQueue ); + bInsertAttribute = true; + } + else + bInsertAttribute = false; + continue; + } + if( bInsertAttribute && ! o_rQueues.empty() ) + { + // look for "description" attribute, insert as comment + nPos = line.indexOf( aDescrStr, 0 ); + if( nPos != -1 ) + { + OString aComment( WhitespaceToSpace( line.copy(nPos+12) ) ); + if( !aComment.isEmpty() ) + o_rQueues.back().m_aComment = OStringToOUString(aComment, aEncoding); + continue; + } + // look for "location" attribute, inser as location + nPos = line.indexOf( aLocStr, 0 ); + if( nPos != -1 ) + { + OString aLoc( WhitespaceToSpace( line.copy(nPos+9) ) ); + if( !aLoc.isEmpty() ) + o_rQueues.back().m_aLocation = OStringToOUString(aLoc, aEncoding); + continue; + } + } + } +} +#endif +static void standardSysQueueTokenHandler( + const std::vector< OString >& i_rLines, + std::vector< PrinterInfoManager::SystemPrintQueue >& o_rQueues, + const SystemCommandParameters* i_pParms) +{ + rtl_TextEncoding aEncoding = osl_getThreadTextEncoding(); + std::unordered_set< OUString > aUniqueSet; + OString aForeToken( i_pParms->pForeToken ); + OString aAftToken( i_pParms->pAftToken ); + /* Normal Unix print queue discovery, also used for Darwin 5 LPR printing + */ + for (auto const& line : i_rLines) + { + sal_Int32 nPos = 0; + + // search for a line describing a printer: + // find if there are enough tokens before the name + for( unsigned int i = 0; i < i_pParms->nForeTokenCount && nPos != -1; i++ ) + { + nPos = line.indexOf( aForeToken, nPos ); + if( nPos != -1 && line.getLength() >= nPos+aForeToken.getLength() ) + nPos += aForeToken.getLength(); + } + if( nPos != -1 ) + { + // find if there is the token after the queue + sal_Int32 nAftPos = line.indexOf( aAftToken, nPos ); + if( nAftPos != -1 ) + { + // get the queue name between fore and aft tokens + OUString aSysQueue( OStringToOUString( line.copy( nPos, nAftPos - nPos ), aEncoding ) ); + // do not insert duplicates (e.g. lpstat tends to produce such lines) + if( aUniqueSet.insert( aSysQueue ).second ) + { + o_rQueues.emplace_back( ); + o_rQueues.back().m_aQueue = aSysQueue; + o_rQueues.back().m_aLocation = aSysQueue; + } + } + } + } +} + +static const struct SystemCommandParameters aParms[] = +{ + #if defined(LINUX) || defined(NETBSD) || defined(FREEBSD) || defined(OPENBSD) + { "/usr/sbin/lpc status", "lpr -P \"(PRINTER)\"", "", ":", 0, standardSysQueueTokenHandler }, + { "lpc status", "lpr -P \"(PRINTER)\"", "", ":", 0, standardSysQueueTokenHandler }, + { "LANG=C;LC_ALL=C;export LANG LC_ALL;lpstat -s", "lp -d \"(PRINTER)\"", "system for ", ": ", 1, standardSysQueueTokenHandler } + #else + { "LANG=C;LC_ALL=C;export LANG LC_ALL;lpget list", "lp -d \"(PRINTER)\"", "", ":", 0, lpgetSysQueueTokenHandler }, + { "LANG=C;LC_ALL=C;export LANG LC_ALL;lpstat -s", "lp -d \"(PRINTER)\"", "system for ", ": ", 1, standardSysQueueTokenHandler }, + { "/usr/sbin/lpc status", "lpr -P \"(PRINTER)\"", "", ":", 0, standardSysQueueTokenHandler }, + { "lpc status", "lpr -P \"(PRINTER)\"", "", ":", 0, standardSysQueueTokenHandler } + #endif +}; + +void SystemQueueInfo::run() +{ + osl_setThreadName("LPR psp::SystemQueueInfo"); + + char pBuffer[1024]; + std::vector< OString > aLines; + + /* Discover which command we can use to get a list of all printer queues */ + for(const auto & rParm : aParms) + { + aLines.clear(); +#if OSL_DEBUG_LEVEL > 1 + SAL_INFO("vcl.unx.print", "trying print queue command \"" + << rParm.pQueueCommand + << "\" ..."); +#endif + OString aCmdLine = rParm.pQueueCommand + OStringLiteral(" 2>/dev/null"); + FILE *pPipe; + if( (pPipe = popen( aCmdLine.getStr(), "r" )) ) + { + while( fgets( pBuffer, 1024, pPipe ) ) + aLines.emplace_back( pBuffer ); + if( ! pclose( pPipe ) ) + { + std::vector< PrinterInfoManager::SystemPrintQueue > aSysPrintQueues; + rParm.pHandler( aLines, aSysPrintQueues, &rParm ); + MutexGuard aGuard( m_aMutex ); + m_bChanged = true; + m_aQueues = aSysPrintQueues; + m_aCommand = OUString::createFromAscii( rParm.pPrintCommand ); +#if OSL_DEBUG_LEVEL > 1 + SAL_INFO("vcl.unx.print", "printing queue command: success."); +#endif + break; + } + } +#if OSL_DEBUG_LEVEL > 1 + SAL_INFO("vcl.unx.print", "printing queue command: failed."); +#endif + } +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |