summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/iio/light/us5182d.txt
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-27 10:05:51 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-27 10:05:51 +0000
commit5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch)
treea94efe259b9009378be6d90eb30d2b019d95c194 /Documentation/devicetree/bindings/iio/light/us5182d.txt
parentInitial commit. (diff)
downloadlinux-5d1646d90e1f2cceb9f0828f4b28318cd0ec7744.tar.xz
linux-5d1646d90e1f2cceb9f0828f4b28318cd0ec7744.zip
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/devicetree/bindings/iio/light/us5182d.txt')
-rw-r--r--Documentation/devicetree/bindings/iio/light/us5182d.txt45
1 files changed, 45 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/light/us5182d.txt b/Documentation/devicetree/bindings/iio/light/us5182d.txt
new file mode 100644
index 000000000..a61979997
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/us5182d.txt
@@ -0,0 +1,45 @@
+* UPISEMI us5182d I2C ALS and Proximity sensor
+
+Required properties:
+- compatible: must be "upisemi,usd5182"
+- reg: the I2C address of the device
+
+Optional properties:
+- upisemi,glass-coef: glass attenuation factor - compensation factor of
+ resolution 1000 for material transmittance.
+
+- upisemi,dark-ths: array of 8 elements containing 16-bit thresholds (adc
+ counts) corresponding to every scale.
+
+- upisemi,upper-dark-gain: 8-bit dark gain compensation factor(4 int and 4
+ fractional bits - Q4.4) applied when light > threshold
+
+- upisemi,lower-dark-gain: 8-bit dark gain compensation factor(4 int and 4
+ fractional bits - Q4.4) applied when light < threshold
+
+- upisemi,continuous: This chip has two power modes: one-shot (chip takes one
+ measurement and then shuts itself down) and continuous (
+ chip takes continuous measurements). The one-shot mode is
+ more power-friendly but the continuous mode may be more
+ reliable. If this property is specified the continuous
+ mode will be used instead of the default one-shot one for
+ raw reads.
+
+If the optional properties are not specified these factors will default to the
+values in the below example.
+The glass-coef defaults to no compensation for the covering material.
+The threshold array defaults to experimental values that work with US5182D
+sensor on evaluation board - roughly between 12-32 lux.
+There will be no dark-gain compensation by default when ALS > thresh
+(0 * dark-gain), and a 1.35 compensation factor when ALS < thresh.
+
+Example:
+
+ usd5182@39 {
+ compatible = "upisemi,usd5182";
+ reg = <0x39>;
+ upisemi,glass-coef = < 1000 >;
+ upisemi,dark-ths = /bits/ 16 <170 200 512 512 800 2000 4000 8000>;
+ upisemi,upper-dark-gain = /bits/ 8 <0x00>;
+ upisemi,lower-dark-gain = /bits/ 8 <0x16>;
+ };