Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 53 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
new file mode 100644
index 000000000..34ab5763f
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
@@ -0,0 +1,53 @@
+Qualcomm PM8941 PMIC Power Key
+
+PROPERTIES
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,pm8941-pwrkey"
+		    "qcom,pm8941-resin"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: base address of registers for block
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: key change interrupt; The format of the specifier is
+		    defined by the binding document describing the node's
+		    interrupt parent.
+
+- debounce:
+	Usage: optional
+	Value type: <u32>
+	Definition: time in microseconds that key must be pressed or released
+		    for state change interrupt to trigger.
+
+- bias-pull-up:
+	Usage: optional
+	Value type: <empty>
+	Definition: presence of this property indicates that the KPDPWR_N pin
+		    should be configured for pull up.
+
+- linux,code:
+	Usage: optional
+	Value type: <u32>
+	Definition: The input key-code associated with the power key.
+		    Use the linux event codes defined in
+		    include/dt-bindings/input/linux-event-codes.h
+		    When property is omitted KEY_POWER is assumed.
+
+EXAMPLE
+
+	pwrkey@800 {
+		compatible = "qcom,pm8941-pwrkey";
+		reg = <0x800>;
+		interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+		debounce = <15625>;
+		bias-pull-up;
+		linux,code = <KEY_POWER>;
+	};