Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 124 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
new file mode 100644
index 000000000..d83a1f97f
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/arm,arch_timer_mmio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM memory mapped architected timer
+
+maintainers:
+  - Marc Zyngier <marc.zyngier@arm.com>
+  - Mark Rutland <mark.rutland@arm.com>
+
+description: |+
+  ARM cores may have a memory mapped architected timer, which provides up to 8
+  frames with a physical and optional virtual timer per frame.
+
+  The memory mapped timer is attached to a GIC to deliver its interrupts via SPIs.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - arm,armv7-timer-mem
+
+  reg:
+    maxItems: 1
+    description: The control frame base address
+
+  '#address-cells':
+    enum: [1, 2]
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+  clock-frequency:
+    description: The frequency of the main counter, in Hz. Should be present
+      only where necessary to work around broken firmware which does not configure
+      CNTFRQ on all CPUs to a uniform correct value. Use of this property is
+      strongly discouraged; fix your firmware unless absolutely impossible.
+
+  always-on:
+    type: boolean
+    description: If present, the timer is powered through an always-on power
+      domain, therefore it never loses context.
+
+  arm,cpu-registers-not-fw-configured:
+    type: boolean
+    description: Firmware does not initialize any of the generic timer CPU
+      registers, which contain their architecturally-defined reset values. Only
+      supported for 32-bit systems which follow the ARMv7 architected reset
+      values.
+
+  arm,no-tick-in-suspend:
+    type: boolean
+    description: The main counter does not tick when the system is in
+      low-power system suspend on some SoCs. This behavior does not match the
+      Architecture Reference Manual's specification that the system counter "must
+      be implemented in an always-on power domain."
+
+patternProperties:
+  '^frame@[0-9a-z]*$':
+    type: object
+    description: A timer node has up to 8 frame sub-nodes, each with the following properties.
+    properties:
+      frame-number:
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 7
+
+      interrupts:
+        minItems: 1
+        maxItems: 2
+        items:
+          - description: physical timer irq
+          - description: virtual timer irq
+
+      reg:
+        minItems: 1
+        maxItems: 2
+        items:
+          - description: 1st view base address
+          - description: 2nd optional view base address
+
+    required:
+      - frame-number
+      - interrupts
+      - reg
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@f0000000 {
+      compatible = "arm,armv7-timer-mem";
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0 0xf0001000 0x1000>;
+      reg = <0xf0000000 0x1000>;
+      clock-frequency = <50000000>;
+
+      frame@0 {
+        frame-number = <0>;
+        interrupts = <0 13 0x8>,
+               <0 14 0x8>;
+        reg = <0x0000 0x1000>,
+              <0x1000 0x1000>;
+      };
+
+      frame@2000 {
+        frame-number = <1>;
+        interrupts = <0 15 0x8>;
+        reg = <0x2000 0x1000>;
+      };
+    };
+
+...