Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 732 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
new file mode 100644
index 000000000..66a0ff196
--- /dev/null
+++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
@@ -0,0 +1,732 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 MundoReader S.L.
+ * Author:  Heiko Stuebner <heiko.stuebner@bq.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/input/input.h>
+#include "rk3188.dtsi"
+
+/ {
+	model = "BQ Edison2 Quad-Core";
+	compatible = "mundoreader,bq-edison2qc", "rockchip,rk3188";
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vsys>;
+		pwms = <&pwm1 0 25000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key &usb_int>;
+
+		power {
+			gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			debounce-interval = <100>;
+			wakeup-source;
+		};
+
+		wake_on_usb: wake-on-usb {
+			label = "Wake-on-USB";
+			gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_hold>;
+		/* only drive the pin low until device is off */
+		active-delay-ms = <3000>;
+	};
+
+	lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_in_vop0: endpoint {
+					remote-endpoint = <&vop0_out_lvds>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_out_panel: endpoint {
+					remote-endpoint = <&panel_in_lvds>;
+				};
+			};
+		};
+	};
+
+	panel {
+		compatible = "innolux,ee101ia-01d", "panel-lvds";
+		backlight = <&backlight>;
+
+		/* pin LCD_CS, Nshtdn input of lvds-encoder */
+		enable-gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_cs>;
+		power-supply = <&vcc_lcd>;
+
+		data-mapping = "vesa-24";
+		height-mm = <163>;
+		width-mm = <261>;
+
+		panel-timing {
+			clock-frequency = <72000000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hback-porch = <160>;
+			hfront-porch = <16>;
+			hsync-len = <10>;
+			vback-porch = <23>;
+			vfront-porch = <12>;
+			vsync-len = <3>;
+		};
+
+		port {
+			panel_in_lvds: endpoint {
+				remote-endpoint = <&lvds_out_panel>;
+			};
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&hym8563>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on>;
+		reset-gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>;
+	};
+
+	avdd_cif: cif-avdd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd-cif";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cif_avdd_en>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc28_cif>;
+	};
+
+	vcc_5v: vcc-5v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&v5_drv>;
+		vin-supply = <&vsys>;
+	};
+
+	vcc_lcd: lcd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-lcd";
+		gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_en>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_otg: usb-otg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_drv>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_5v>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vccq_emmc: emmc-vccq-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccq-emmc";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	/* supplied from the bq24196 */
+	vsys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cru {
+	assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>,
+			  <&cru ACLK_CPU>,
+			  <&cru HCLK_CPU>, <&cru PCLK_CPU>,
+			  <&cru ACLK_PERI>, <&cru HCLK_PERI>,
+			  <&cru PCLK_PERI>;
+	assigned-clock-rates = <594000000>, <504000000>,
+			       <300000000>,
+			       <150000000>, <75000000>,
+			       <300000000>, <150000000>,
+			       <75000000>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vccq_emmc>;
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	lis3de: accelerometer@29 {
+		compatible = "st,lis3de";
+		reg = <0x29>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB7 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gsensor_int>;
+		rotation-matrix = "1", "0", "0",
+				  "0", "-1", "0",
+				  "0", "0", "1";
+		vdd-supply = <&vcc_io>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tmp108@48 {
+		compatible = "ti,tmp108";
+		reg = <0x48>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tmp_alrt>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+	};
+
+	bat: battery@55 {
+		compatible = "ti,bq27541";
+		reg = <0x55>;
+		power-supplies = <&bq24196>;
+	};
+
+	act8846: pmic@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dvs0_ctl &pmic_int>;
+
+		vp1-supply = <&vsys>;
+		vp2-supply = <&vsys>;
+		vp3-supply = <&vsys>;
+		vp4-supply = <&vsys>;
+		inl1-supply = <&vcc_io>;
+		inl2-supply = <&vsys>;
+		inl3-supply = <&vsys>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "VCC_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG2 {
+				regulator-name = "VDD_LOG";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vdd_arm: REG3 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <875000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			vcc_io: vcc_hdmi: REG4 {
+				regulator-name = "VCC_IO";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vdd_10: REG5 {
+				regulator-name = "VDD_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vdd_12: REG6 {
+				regulator-name = "VDD_12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc18_cif: REG7 {
+				regulator-name = "VCC18_CIF";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcca_33: REG8 {
+				regulator-name = "VCCA_33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_tp: REG9 {
+				regulator-name = "VCC_TP";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vccio_wl: REG10 {
+				regulator-name = "VCCIO_WL";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "VCC_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc28_cif: REG12 {
+				regulator-name = "VCC28_CIF";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	bq24196: charger@6b {
+		compatible = "ti,bq24196";
+		reg = <0x6b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD7 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&charger_int &chg_ctl &otg_en>;
+		ti,system-minimum-microvolt = <3200000>;
+		monitored-battery = <&bat>;
+		omit-battery-class;
+
+		usb_otg_vbus: usb-otg-vbus { };
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ft5606: touchscreen@3e {
+		compatible = "edt,edt-ft5506";
+		reg = <0x3e>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PB7 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int &tp_rst>;
+		reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
+		touchscreen-inverted-y;
+		/* hw ts resolution does not match display */
+		touchscreen-size-y = <1024>;
+		touchscreen-size-x = <768>;
+		touchscreen-swapped-x-y;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rt5616: codec@1b {
+		compatible = "realtek,rt5616";
+		reg = <0x1b>;
+		clocks = <&cru SCLK_I2S0>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>;
+	vqmmc-supply = <&vccio_wl>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PD2 GPIO_ACTIVE_HIGH>;
+		interrupt-names = "host-wake";
+		brcm,drive-strength = <5>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake>;
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	act8846 {
+		dvs0_ctl: dvs0-ctl {
+			rockchip,pins = <3 RK_PD3 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	bq24196 {
+		charger_int: charger-int {
+			rockchip,pins = <0 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		/* pin hog to make it select usb profile */
+		chg_ctl: chg-ctl {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		/* low: charging, high: complete, fault: blinking */
+		chg_det: chg-det {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/* charging enabled when pin low and register set */
+		chg_en: chg-en {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		/* bq29196 powergood (when low) signal */
+		dc_det: dc-det {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/* wire bq24196 otg pin to high, to enable 500mA charging */
+		otg_en: otg-en {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	camera {
+		cif0_pdn: cif0-pdn {
+			rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		cif1_pdn: cif1-pdn {
+			rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		cif_avdd_en: cif-avdd-en {
+			rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	display {
+		lcd_cs: lcd-cs {
+			rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		lcd_en: lcd-en {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ft5606 {
+		tp_int: tp-int {
+			rockchip,pins = <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		tp_rst: tp-rst {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hdmi {
+		hdmi_int: hdmi-int {
+			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		hdmi_rst: hdmi-rst {
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hym8563 {
+		rtc_int: rtc-int {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	keys {
+		pwr_hold: pwr-hold {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pwr_key: pwr-key {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	lis3de {
+		gsensor_int: gsensor-int {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	mmc {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	tmp108 {
+		tmp_alrt: tmp-alrt {
+			rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		v5_drv: v5-drv {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		otg_drv: otg-drv {
+			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb_int: usb-int {
+			rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rk903 {
+		bt_host_wake: bt-host-wake {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		bt_reg_on: bt-reg-on {
+			rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/* pin hog to pull the reset high */
+		bt_rst: bt-rst {
+			rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		bt_wake: bt-wake {
+			rockchip,pins = <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_host_wake: wifi-host-wake {
+			rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		wifi_reg_on: wifi-reg-on {
+			rockchip,pins = <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <2000000>;
+		device-wakeup-gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake &bt_reg_on &bt_rst &bt_wake>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-0 = <&uart3_xfer &uart3_cts &uart3_rts>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&vop0 {
+	status = "okay";
+};
+
+&vop0_out {
+	vop0_out_lvds: endpoint {
+		remote-endpoint = <&lvds_in_vop0>;
+	};
+};
+
+&vop1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdc1_dclk &lcdc1_den &lcdc1_hsync
+		     &lcdc1_vsync &lcdc1_rgb24>;
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};