Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 388 insertions, 0 deletions

diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
new file mode 100644
index 000000000..456ddba15
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
@@ -0,0 +1,388 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	Include file for Alchemy Semiconductor's Au1550 Descriptor
+ *	Based DMA Controller.
+ *
+ * Copyright 2004 Embedded Edge, LLC
+ *	dan@embeddededge.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Specifics for the Au1xxx Descriptor-Based DMA Controller,
+ * first seen in the AU1550 part.
+ */
+#ifndef _AU1000_DBDMA_H_
+#define _AU1000_DBDMA_H_
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+typedef volatile struct dbdma_global {
+	u32	ddma_config;
+	u32	ddma_intstat;
+	u32	ddma_throttle;
+	u32	ddma_inten;
+} dbdma_global_t;
+
+/* General Configuration. */
+#define DDMA_CONFIG_AF		(1 << 2)
+#define DDMA_CONFIG_AH		(1 << 1)
+#define DDMA_CONFIG_AL		(1 << 0)
+
+#define DDMA_THROTTLE_EN	(1 << 31)
+
+/* The structure of a DMA Channel. */
+typedef volatile struct au1xxx_dma_channel {
+	u32	ddma_cfg;	/* See below */
+	u32	ddma_desptr;	/* 32-byte aligned pointer to descriptor */
+	u32	ddma_statptr;	/* word aligned pointer to status word */
+	u32	ddma_dbell;	/* A write activates channel operation */
+	u32	ddma_irq;	/* If bit 0 set, interrupt pending */
+	u32	ddma_stat;	/* See below */
+	u32	ddma_bytecnt;	/* Byte count, valid only when chan idle */
+	/* Remainder, up to the 256 byte boundary, is reserved. */
+} au1x_dma_chan_t;
+
+#define DDMA_CFG_SED	(1 << 9)	/* source DMA level/edge detect */
+#define DDMA_CFG_SP	(1 << 8)	/* source DMA polarity */
+#define DDMA_CFG_DED	(1 << 7)	/* destination DMA level/edge detect */
+#define DDMA_CFG_DP	(1 << 6)	/* destination DMA polarity */
+#define DDMA_CFG_SYNC	(1 << 5)	/* Sync static bus controller */
+#define DDMA_CFG_PPR	(1 << 4)	/* PCI posted read/write control */
+#define DDMA_CFG_DFN	(1 << 3)	/* Descriptor fetch non-coherent */
+#define DDMA_CFG_SBE	(1 << 2)	/* Source big endian */
+#define DDMA_CFG_DBE	(1 << 1)	/* Destination big endian */
+#define DDMA_CFG_EN	(1 << 0)	/* Channel enable */
+
+/*
+ * Always set when descriptor processing done, regardless of
+ * interrupt enable state.  Reflected in global intstat, don't
+ * clear this until global intstat is read/used.
+ */
+#define DDMA_IRQ_IN	(1 << 0)
+
+#define DDMA_STAT_DB	(1 << 2)	/* Doorbell pushed */
+#define DDMA_STAT_V	(1 << 1)	/* Descriptor valid */
+#define DDMA_STAT_H	(1 << 0)	/* Channel Halted */
+
+/*
+ * "Standard" DDMA Descriptor.
+ * Must be 32-byte aligned.
+ */
+typedef volatile struct au1xxx_ddma_desc {
+	u32	dscr_cmd0;		/* See below */
+	u32	dscr_cmd1;		/* See below */
+	u32	dscr_source0;		/* source phys address */
+	u32	dscr_source1;		/* See below */
+	u32	dscr_dest0;		/* Destination address */
+	u32	dscr_dest1;		/* See below */
+	u32	dscr_stat;		/* completion status */
+	u32	dscr_nxtptr;		/* Next descriptor pointer (mostly) */
+	/*
+	 * First 32 bytes are HW specific!!!
+	 * Let's have some SW data following -- make sure it's 32 bytes.
+	 */
+	u32	sw_status;
+	u32	sw_context;
+	u32	sw_reserved[6];
+} au1x_ddma_desc_t;
+
+#define DSCR_CMD0_V		(1 << 31)	/* Descriptor valid */
+#define DSCR_CMD0_MEM		(1 << 30)	/* mem-mem transfer */
+#define DSCR_CMD0_SID_MASK	(0x1f << 25)	/* Source ID */
+#define DSCR_CMD0_DID_MASK	(0x1f << 20)	/* Destination ID */
+#define DSCR_CMD0_SW_MASK	(0x3 << 18)	/* Source Width */
+#define DSCR_CMD0_DW_MASK	(0x3 << 16)	/* Destination Width */
+#define DSCR_CMD0_ARB		(0x1 << 15)	/* Set for Hi Pri */
+#define DSCR_CMD0_DT_MASK	(0x3 << 13)	/* Descriptor Type */
+#define DSCR_CMD0_SN		(0x1 << 12)	/* Source non-coherent */
+#define DSCR_CMD0_DN		(0x1 << 11)	/* Destination non-coherent */
+#define DSCR_CMD0_SM		(0x1 << 10)	/* Stride mode */
+#define DSCR_CMD0_IE		(0x1 << 8)	/* Interrupt Enable */
+#define DSCR_CMD0_SP		(0x1 << 4)	/* Status pointer select */
+#define DSCR_CMD0_CV		(0x1 << 2)	/* Clear Valid when done */
+#define DSCR_CMD0_ST_MASK	(0x3 << 0)	/* Status instruction */
+
+#define SW_STATUS_INUSE		(1 << 0)
+
+/* Command 0 device IDs. */
+#define AU1550_DSCR_CMD0_UART0_TX	0
+#define AU1550_DSCR_CMD0_UART0_RX	1
+#define AU1550_DSCR_CMD0_UART3_TX	2
+#define AU1550_DSCR_CMD0_UART3_RX	3
+#define AU1550_DSCR_CMD0_DMA_REQ0	4
+#define AU1550_DSCR_CMD0_DMA_REQ1	5
+#define AU1550_DSCR_CMD0_DMA_REQ2	6
+#define AU1550_DSCR_CMD0_DMA_REQ3	7
+#define AU1550_DSCR_CMD0_USBDEV_RX0	8
+#define AU1550_DSCR_CMD0_USBDEV_TX0	9
+#define AU1550_DSCR_CMD0_USBDEV_TX1	10
+#define AU1550_DSCR_CMD0_USBDEV_TX2	11
+#define AU1550_DSCR_CMD0_USBDEV_RX3	12
+#define AU1550_DSCR_CMD0_USBDEV_RX4	13
+#define AU1550_DSCR_CMD0_PSC0_TX	14
+#define AU1550_DSCR_CMD0_PSC0_RX	15
+#define AU1550_DSCR_CMD0_PSC1_TX	16
+#define AU1550_DSCR_CMD0_PSC1_RX	17
+#define AU1550_DSCR_CMD0_PSC2_TX	18
+#define AU1550_DSCR_CMD0_PSC2_RX	19
+#define AU1550_DSCR_CMD0_PSC3_TX	20
+#define AU1550_DSCR_CMD0_PSC3_RX	21
+#define AU1550_DSCR_CMD0_PCI_WRITE	22
+#define AU1550_DSCR_CMD0_NAND_FLASH	23
+#define AU1550_DSCR_CMD0_MAC0_RX	24
+#define AU1550_DSCR_CMD0_MAC0_TX	25
+#define AU1550_DSCR_CMD0_MAC1_RX	26
+#define AU1550_DSCR_CMD0_MAC1_TX	27
+
+#define AU1200_DSCR_CMD0_UART0_TX	0
+#define AU1200_DSCR_CMD0_UART0_RX	1
+#define AU1200_DSCR_CMD0_UART1_TX	2
+#define AU1200_DSCR_CMD0_UART1_RX	3
+#define AU1200_DSCR_CMD0_DMA_REQ0	4
+#define AU1200_DSCR_CMD0_DMA_REQ1	5
+#define AU1200_DSCR_CMD0_MAE_BE		6
+#define AU1200_DSCR_CMD0_MAE_FE		7
+#define AU1200_DSCR_CMD0_SDMS_TX0	8
+#define AU1200_DSCR_CMD0_SDMS_RX0	9
+#define AU1200_DSCR_CMD0_SDMS_TX1	10
+#define AU1200_DSCR_CMD0_SDMS_RX1	11
+#define AU1200_DSCR_CMD0_AES_TX		13
+#define AU1200_DSCR_CMD0_AES_RX		12
+#define AU1200_DSCR_CMD0_PSC0_TX	14
+#define AU1200_DSCR_CMD0_PSC0_RX	15
+#define AU1200_DSCR_CMD0_PSC1_TX	16
+#define AU1200_DSCR_CMD0_PSC1_RX	17
+#define AU1200_DSCR_CMD0_CIM_RXA	18
+#define AU1200_DSCR_CMD0_CIM_RXB	19
+#define AU1200_DSCR_CMD0_CIM_RXC	20
+#define AU1200_DSCR_CMD0_MAE_BOTH	21
+#define AU1200_DSCR_CMD0_LCD		22
+#define AU1200_DSCR_CMD0_NAND_FLASH	23
+#define AU1200_DSCR_CMD0_PSC0_SYNC	24
+#define AU1200_DSCR_CMD0_PSC1_SYNC	25
+#define AU1200_DSCR_CMD0_CIM_SYNC	26
+
+#define AU1300_DSCR_CMD0_UART0_TX      0
+#define AU1300_DSCR_CMD0_UART0_RX      1
+#define AU1300_DSCR_CMD0_UART1_TX      2
+#define AU1300_DSCR_CMD0_UART1_RX      3
+#define AU1300_DSCR_CMD0_UART2_TX      4
+#define AU1300_DSCR_CMD0_UART2_RX      5
+#define AU1300_DSCR_CMD0_UART3_TX      6
+#define AU1300_DSCR_CMD0_UART3_RX      7
+#define AU1300_DSCR_CMD0_SDMS_TX0      8
+#define AU1300_DSCR_CMD0_SDMS_RX0      9
+#define AU1300_DSCR_CMD0_SDMS_TX1      10
+#define AU1300_DSCR_CMD0_SDMS_RX1      11
+#define AU1300_DSCR_CMD0_AES_TX	       12
+#define AU1300_DSCR_CMD0_AES_RX	       13
+#define AU1300_DSCR_CMD0_PSC0_TX       14
+#define AU1300_DSCR_CMD0_PSC0_RX       15
+#define AU1300_DSCR_CMD0_PSC1_TX       16
+#define AU1300_DSCR_CMD0_PSC1_RX       17
+#define AU1300_DSCR_CMD0_PSC2_TX       18
+#define AU1300_DSCR_CMD0_PSC2_RX       19
+#define AU1300_DSCR_CMD0_PSC3_TX       20
+#define AU1300_DSCR_CMD0_PSC3_RX       21
+#define AU1300_DSCR_CMD0_LCD	       22
+#define AU1300_DSCR_CMD0_NAND_FLASH    23
+#define AU1300_DSCR_CMD0_SDMS_TX2      24
+#define AU1300_DSCR_CMD0_SDMS_RX2      25
+#define AU1300_DSCR_CMD0_CIM_SYNC      26
+#define AU1300_DSCR_CMD0_UDMA	       27
+#define AU1300_DSCR_CMD0_DMA_REQ0      28
+#define AU1300_DSCR_CMD0_DMA_REQ1      29
+
+#define DSCR_CMD0_THROTTLE	30
+#define DSCR_CMD0_ALWAYS	31
+#define DSCR_NDEV_IDS		32
+/* This macro is used to find/create custom device types */
+#define DSCR_DEV2CUSTOM_ID(x, d) (((((x) & 0xFFFF) << 8) | 0x32000000) | \
+				  ((d) & 0xFF))
+#define DSCR_CUSTOM2DEV_ID(x)	((x) & 0xFF)
+
+#define DSCR_CMD0_SID(x)	(((x) & 0x1f) << 25)
+#define DSCR_CMD0_DID(x)	(((x) & 0x1f) << 20)
+
+/* Source/Destination transfer width. */
+#define DSCR_CMD0_BYTE		0
+#define DSCR_CMD0_HALFWORD	1
+#define DSCR_CMD0_WORD		2
+
+#define DSCR_CMD0_SW(x)		(((x) & 0x3) << 18)
+#define DSCR_CMD0_DW(x)		(((x) & 0x3) << 16)
+
+/* DDMA Descriptor Type. */
+#define DSCR_CMD0_STANDARD	0
+#define DSCR_CMD0_LITERAL	1
+#define DSCR_CMD0_CMP_BRANCH	2
+
+#define DSCR_CMD0_DT(x)		(((x) & 0x3) << 13)
+
+/* Status Instruction. */
+#define DSCR_CMD0_ST_NOCHANGE	0	/* Don't change */
+#define DSCR_CMD0_ST_CURRENT	1	/* Write current status */
+#define DSCR_CMD0_ST_CMD0	2	/* Write cmd0 with V cleared */
+#define DSCR_CMD0_ST_BYTECNT	3	/* Write remaining byte count */
+
+#define DSCR_CMD0_ST(x)		(((x) & 0x3) << 0)
+
+/* Descriptor Command 1. */
+#define DSCR_CMD1_SUPTR_MASK	(0xf << 28)	/* upper 4 bits of src addr */
+#define DSCR_CMD1_DUPTR_MASK	(0xf << 24)	/* upper 4 bits of dest addr */
+#define DSCR_CMD1_FL_MASK	(0x3 << 22)	/* Flag bits */
+#define DSCR_CMD1_BC_MASK	(0x3fffff)	/* Byte count */
+
+/* Flag description. */
+#define DSCR_CMD1_FL_MEM_STRIDE0	0
+#define DSCR_CMD1_FL_MEM_STRIDE1	1
+#define DSCR_CMD1_FL_MEM_STRIDE2	2
+
+#define DSCR_CMD1_FL(x)		(((x) & 0x3) << 22)
+
+/* Source1, 1-dimensional stride. */
+#define DSCR_SRC1_STS_MASK	(3 << 30)	/* Src xfer size */
+#define DSCR_SRC1_SAM_MASK	(3 << 28)	/* Src xfer movement */
+#define DSCR_SRC1_SB_MASK	(0x3fff << 14)	/* Block size */
+#define DSCR_SRC1_SB(x)		(((x) & 0x3fff) << 14)
+#define DSCR_SRC1_SS_MASK	(0x3fff << 0)	/* Stride */
+#define DSCR_SRC1_SS(x)		(((x) & 0x3fff) << 0)
+
+/* Dest1, 1-dimensional stride. */
+#define DSCR_DEST1_DTS_MASK	(3 << 30)	/* Dest xfer size */
+#define DSCR_DEST1_DAM_MASK	(3 << 28)	/* Dest xfer movement */
+#define DSCR_DEST1_DB_MASK	(0x3fff << 14)	/* Block size */
+#define DSCR_DEST1_DB(x)	(((x) & 0x3fff) << 14)
+#define DSCR_DEST1_DS_MASK	(0x3fff << 0)	/* Stride */
+#define DSCR_DEST1_DS(x)	(((x) & 0x3fff) << 0)
+
+#define DSCR_xTS_SIZE1		0
+#define DSCR_xTS_SIZE2		1
+#define DSCR_xTS_SIZE4		2
+#define DSCR_xTS_SIZE8		3
+#define DSCR_SRC1_STS(x)	(((x) & 3) << 30)
+#define DSCR_DEST1_DTS(x)	(((x) & 3) << 30)
+
+#define DSCR_xAM_INCREMENT	0
+#define DSCR_xAM_DECREMENT	1
+#define DSCR_xAM_STATIC		2
+#define DSCR_xAM_BURST		3
+#define DSCR_SRC1_SAM(x)	(((x) & 3) << 28)
+#define DSCR_DEST1_DAM(x)	(((x) & 3) << 28)
+
+/* The next descriptor pointer. */
+#define DSCR_NXTPTR_MASK	(0x07ffffff)
+#define DSCR_NXTPTR(x)		((x) >> 5)
+#define DSCR_GET_NXTPTR(x)	((x) << 5)
+#define DSCR_NXTPTR_MS		(1 << 27)
+
+/* The number of DBDMA channels. */
+#define NUM_DBDMA_CHANS 16
+
+/*
+ * DDMA API definitions
+ * FIXME: may not fit to this header file
+ */
+typedef struct dbdma_device_table {
+	u32	dev_id;
+	u32	dev_flags;
+	u32	dev_tsize;
+	u32	dev_devwidth;
+	u32	dev_physaddr;		/* If FIFO */
+	u32	dev_intlevel;
+	u32	dev_intpolarity;
+} dbdev_tab_t;
+
+
+typedef struct dbdma_chan_config {
+	spinlock_t	lock;
+
+	u32			chan_flags;
+	u32			chan_index;
+	dbdev_tab_t		*chan_src;
+	dbdev_tab_t		*chan_dest;
+	au1x_dma_chan_t		*chan_ptr;
+	au1x_ddma_desc_t	*chan_desc_base;
+	u32			cdb_membase; /* kmalloc base of above */
+	au1x_ddma_desc_t	*get_ptr, *put_ptr, *cur_ptr;
+	void			*chan_callparam;
+	void			(*chan_callback)(int, void *);
+} chan_tab_t;
+
+#define DEV_FLAGS_INUSE		(1 << 0)
+#define DEV_FLAGS_ANYUSE	(1 << 1)
+#define DEV_FLAGS_OUT		(1 << 2)
+#define DEV_FLAGS_IN		(1 << 3)
+#define DEV_FLAGS_BURSTABLE	(1 << 4)
+#define DEV_FLAGS_SYNC		(1 << 5)
+/* end DDMA API definitions */
+
+/*
+ * External functions for drivers to use.
+ * Use this to allocate a DBDMA channel.  The device IDs are one of
+ * the DSCR_CMD0 devices IDs, which is usually redefined to a more
+ * meaningful name.  The 'callback' is called during DMA completion
+ * interrupt.
+ */
+extern u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
+				   void (*callback)(int, void *),
+				   void *callparam);
+
+#define DBDMA_MEM_CHAN	DSCR_CMD0_ALWAYS
+
+/* Set the device width of an in/out FIFO. */
+u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits);
+
+/* Allocate a ring of descriptors for DBDMA. */
+u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries);
+
+/* Put buffers on source/destination descriptors. */
+u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags);
+u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags);
+
+/* Get a buffer from the destination descriptor. */
+u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes);
+
+void au1xxx_dbdma_stop(u32 chanid);
+void au1xxx_dbdma_start(u32 chanid);
+void au1xxx_dbdma_reset(u32 chanid);
+u32 au1xxx_get_dma_residue(u32 chanid);
+
+void au1xxx_dbdma_chan_free(u32 chanid);
+void au1xxx_dbdma_dump(u32 chanid);
+
+u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr);
+
+u32 au1xxx_ddma_add_device(dbdev_tab_t *dev);
+extern void au1xxx_ddma_del_device(u32 devid);
+void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp);
+
+/*
+ *	Flags for the put_source/put_dest functions.
+ */
+#define DDMA_FLAGS_IE	(1 << 0)
+#define DDMA_FLAGS_NOIE (1 << 1)
+
+#endif /* _LANGUAGE_ASSEMBLY */
+#endif /* _AU1000_DBDMA_H_ */