Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 2215 insertions, 0 deletions

diff --git a/arch/mips/include/asm/octeon/cvmx-pow.h b/arch/mips/include/asm/octeon/cvmx-pow.h
new file mode 100644
index 000000000..a3b23811e
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-pow.h
@@ -0,0 +1,2215 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+/**
+ * Interface to the hardware Packet Order / Work unit.
+ *
+ * New, starting with SDK 1.7.0, cvmx-pow supports a number of
+ * extended consistency checks. The define
+ * CVMX_ENABLE_POW_CHECKS controls the runtime insertion of POW
+ * internal state checks to find common programming errors. If
+ * CVMX_ENABLE_POW_CHECKS is not defined, checks are by default
+ * enabled. For example, cvmx-pow will check for the following
+ * program errors or POW state inconsistency.
+ * - Requesting a POW operation with an active tag switch in
+ *   progress.
+ * - Waiting for a tag switch to complete for an excessively
+ *   long period. This is normally a sign of an error in locking
+ *   causing deadlock.
+ * - Illegal tag switches from NULL_NULL.
+ * - Illegal tag switches from NULL.
+ * - Illegal deschedule request.
+ * - WQE pointer not matching the one attached to the core by
+ *   the POW.
+ *
+ */
+
+#ifndef __CVMX_POW_H__
+#define __CVMX_POW_H__
+
+#include <asm/octeon/cvmx-pow-defs.h>
+
+#include <asm/octeon/cvmx-scratch.h>
+#include <asm/octeon/cvmx-wqe.h>
+
+/* Default to having all POW constancy checks turned on */
+#ifndef CVMX_ENABLE_POW_CHECKS
+#define CVMX_ENABLE_POW_CHECKS 1
+#endif
+
+enum cvmx_pow_tag_type {
+	/* Tag ordering is maintained */
+	CVMX_POW_TAG_TYPE_ORDERED   = 0L,
+	/* Tag ordering is maintained, and at most one PP has the tag */
+	CVMX_POW_TAG_TYPE_ATOMIC    = 1L,
+	/*
+	 * The work queue entry from the order - NEVER tag switch from
+	 * NULL to NULL
+	 */
+	CVMX_POW_TAG_TYPE_NULL	    = 2L,
+	/* A tag switch to NULL, and there is no space reserved in POW
+	 * - NEVER tag switch to NULL_NULL
+	 * - NEVER tag switch from NULL_NULL
+	 * - NULL_NULL is entered at the beginning of time and on a deschedule.
+	 * - NULL_NULL can be exited by a new work request. A NULL_SWITCH
+	 * load can also switch the state to NULL
+	 */
+	CVMX_POW_TAG_TYPE_NULL_NULL = 3L
+};
+
+/**
+ * Wait flag values for pow functions.
+ */
+typedef enum {
+	CVMX_POW_WAIT = 1,
+	CVMX_POW_NO_WAIT = 0,
+} cvmx_pow_wait_t;
+
+/**
+ *  POW tag operations.	 These are used in the data stored to the POW.
+ */
+typedef enum {
+	/*
+	 * switch the tag (only) for this PP
+	 * - the previous tag should be non-NULL in this case
+	 * - tag switch response required
+	 * - fields used: op, type, tag
+	 */
+	CVMX_POW_TAG_OP_SWTAG = 0L,
+	/*
+	 * switch the tag for this PP, with full information
+	 * - this should be used when the previous tag is NULL
+	 * - tag switch response required
+	 * - fields used: address, op, grp, type, tag
+	 */
+	CVMX_POW_TAG_OP_SWTAG_FULL = 1L,
+	/*
+	 * switch the tag (and/or group) for this PP and de-schedule
+	 * - OK to keep the tag the same and only change the group
+	 * - fields used: op, no_sched, grp, type, tag
+	 */
+	CVMX_POW_TAG_OP_SWTAG_DESCH = 2L,
+	/*
+	 * just de-schedule
+	 * - fields used: op, no_sched
+	 */
+	CVMX_POW_TAG_OP_DESCH = 3L,
+	/*
+	 * create an entirely new work queue entry
+	 * - fields used: address, op, qos, grp, type, tag
+	 */
+	CVMX_POW_TAG_OP_ADDWQ = 4L,
+	/*
+	 * just update the work queue pointer and grp for this PP
+	 * - fields used: address, op, grp
+	 */
+	CVMX_POW_TAG_OP_UPDATE_WQP_GRP = 5L,
+	/*
+	 * set the no_sched bit on the de-schedule list
+	 *
+	 * - does nothing if the selected entry is not on the
+	 *   de-schedule list
+	 *
+	 * - does nothing if the stored work queue pointer does not
+	 *   match the address field
+	 *
+	 * - fields used: address, index, op
+	 *
+	 *  Before issuing a *_NSCHED operation, SW must guarantee
+	 *  that all prior deschedules and set/clr NSCHED operations
+	 *  are complete and all prior switches are complete. The
+	 *  hardware provides the opsdone bit and swdone bit for SW
+	 *  polling. After issuing a *_NSCHED operation, SW must
+	 *  guarantee that the set/clr NSCHED is complete before any
+	 *  subsequent operations.
+	 */
+	CVMX_POW_TAG_OP_SET_NSCHED = 6L,
+	/*
+	 * clears the no_sched bit on the de-schedule list
+	 *
+	 * - does nothing if the selected entry is not on the
+	 *   de-schedule list
+	 *
+	 * - does nothing if the stored work queue pointer does not
+	 *   match the address field
+	 *
+	 * - fields used: address, index, op
+	 *
+	 * Before issuing a *_NSCHED operation, SW must guarantee that
+	 * all prior deschedules and set/clr NSCHED operations are
+	 * complete and all prior switches are complete. The hardware
+	 * provides the opsdone bit and swdone bit for SW
+	 * polling. After issuing a *_NSCHED operation, SW must
+	 * guarantee that the set/clr NSCHED is complete before any
+	 * subsequent operations.
+	 */
+	CVMX_POW_TAG_OP_CLR_NSCHED = 7L,
+	/* do nothing */
+	CVMX_POW_TAG_OP_NOP = 15L
+} cvmx_pow_tag_op_t;
+
+/**
+ * This structure defines the store data on a store to POW
+ */
+typedef union {
+	uint64_t u64;
+	struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+		/*
+		 * Don't reschedule this entry. no_sched is used for
+		 * CVMX_POW_TAG_OP_SWTAG_DESCH and
+		 * CVMX_POW_TAG_OP_DESCH
+		 */
+		uint64_t no_sched:1;
+		uint64_t unused:2;
+		/* Tontains index of entry for a CVMX_POW_TAG_OP_*_NSCHED */
+		uint64_t index:13;
+		/* The operation to perform */
+		cvmx_pow_tag_op_t op:4;
+		uint64_t unused2:2;
+		/*
+		 * The QOS level for the packet. qos is only used for
+		 * CVMX_POW_TAG_OP_ADDWQ
+		 */
+		uint64_t qos:3;
+		/*
+		 * The group that the work queue entry will be
+		 * scheduled to grp is used for CVMX_POW_TAG_OP_ADDWQ,
+		 * CVMX_POW_TAG_OP_SWTAG_FULL,
+		 * CVMX_POW_TAG_OP_SWTAG_DESCH, and
+		 * CVMX_POW_TAG_OP_UPDATE_WQP_GRP
+		 */
+		uint64_t grp:4;
+		/*
+		 * The type of the tag. type is used for everything
+		 * except CVMX_POW_TAG_OP_DESCH,
+		 * CVMX_POW_TAG_OP_UPDATE_WQP_GRP, and
+		 * CVMX_POW_TAG_OP_*_NSCHED
+		 */
+		uint64_t type:3;
+		/*
+		 * The actual tag. tag is used for everything except
+		 * CVMX_POW_TAG_OP_DESCH,
+		 * CVMX_POW_TAG_OP_UPDATE_WQP_GRP, and
+		 * CVMX_POW_TAG_OP_*_NSCHED
+		 */
+		uint64_t tag:32;
+#else
+		uint64_t tag:32;
+		uint64_t type:3;
+		uint64_t grp:4;
+		uint64_t qos:3;
+		uint64_t unused2:2;
+		cvmx_pow_tag_op_t op:4;
+		uint64_t index:13;
+		uint64_t unused:2;
+		uint64_t no_sched:1;
+#endif
+	} s;
+} cvmx_pow_tag_req_t;
+
+/**
+ * This structure describes the address to load stuff from POW
+ */
+typedef union {
+	uint64_t u64;
+
+    /**
+     * Address for new work request loads (did<2:0> == 0)
+     */
+	struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+		/* Mips64 address region. Should be CVMX_IO_SEG */
+		uint64_t mem_region:2;
+		/* Must be zero */
+		uint64_t reserved_49_61:13;
+		/* Must be one */
+		uint64_t is_io:1;
+		/* the ID of POW -- did<2:0> == 0 in this case */
+		uint64_t did:8;
+		/* Must be zero */
+		uint64_t reserved_4_39:36;
+		/*
+		 * If set, don't return load response until work is
+		 * available.
+		 */
+		uint64_t wait:1;
+		/* Must be zero */
+		uint64_t reserved_0_2:3;
+#else
+		uint64_t reserved_0_2:3;
+		uint64_t wait:1;
+		uint64_t reserved_4_39:36;
+		uint64_t did:8;
+		uint64_t is_io:1;
+		uint64_t reserved_49_61:13;
+		uint64_t mem_region:2;
+#endif
+	} swork;
+
+    /**
+     * Address for loads to get POW internal status
+     */
+	struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+		/* Mips64 address region. Should be CVMX_IO_SEG */
+		uint64_t mem_region:2;
+		/* Must be zero */
+		uint64_t reserved_49_61:13;
+		/* Must be one */
+		uint64_t is_io:1;
+		/* the ID of POW -- did<2:0> == 1 in this case */
+		uint64_t did:8;
+		/* Must be zero */
+		uint64_t reserved_10_39:30;
+		/* The core id to get status for */
+		uint64_t coreid:4;
+		/*
+		 * If set and get_cur is set, return reverse tag-list
+		 * pointer rather than forward tag-list pointer.
+		 */
+		uint64_t get_rev:1;
+		/*
+		 * If set, return current status rather than pending
+		 * status.
+		 */
+		uint64_t get_cur:1;
+		/*
+		 * If set, get the work-queue pointer rather than
+		 * tag/type.
+		 */
+		uint64_t get_wqp:1;
+		/* Must be zero */
+		uint64_t reserved_0_2:3;
+#else
+		uint64_t reserved_0_2:3;
+		uint64_t get_wqp:1;
+		uint64_t get_cur:1;
+		uint64_t get_rev:1;
+		uint64_t coreid:4;
+		uint64_t reserved_10_39:30;
+		uint64_t did:8;
+		uint64_t is_io:1;
+		uint64_t reserved_49_61:13;
+		uint64_t mem_region:2;
+#endif
+	} sstatus;
+
+    /**
+     * Address for memory loads to get POW internal state
+     */
+	struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+		/* Mips64 address region. Should be CVMX_IO_SEG */
+		uint64_t mem_region:2;
+		/* Must be zero */
+		uint64_t reserved_49_61:13;
+		/* Must be one */
+		uint64_t is_io:1;
+		/* the ID of POW -- did<2:0> == 2 in this case */
+		uint64_t did:8;
+		/* Must be zero */
+		uint64_t reserved_16_39:24;
+		/* POW memory index */
+		uint64_t index:11;
+		/*
+		 * If set, return deschedule information rather than
+		 * the standard response for work-queue index (invalid
+		 * if the work-queue entry is not on the deschedule
+		 * list).
+		 */
+		uint64_t get_des:1;
+		/*
+		 * If set, get the work-queue pointer rather than
+		 * tag/type (no effect when get_des set).
+		 */
+		uint64_t get_wqp:1;
+		/* Must be zero */
+		uint64_t reserved_0_2:3;
+#else
+		uint64_t reserved_0_2:3;
+		uint64_t get_wqp:1;
+		uint64_t get_des:1;
+		uint64_t index:11;
+		uint64_t reserved_16_39:24;
+		uint64_t did:8;
+		uint64_t is_io:1;
+		uint64_t reserved_49_61:13;
+		uint64_t mem_region:2;
+#endif
+	} smemload;
+
+    /**
+     * Address for index/pointer loads
+     */
+	struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+		/* Mips64 address region. Should be CVMX_IO_SEG */
+		uint64_t mem_region:2;
+		/* Must be zero */
+		uint64_t reserved_49_61:13;
+		/* Must be one */
+		uint64_t is_io:1;
+		/* the ID of POW -- did<2:0> == 3 in this case */
+		uint64_t did:8;
+		/* Must be zero */
+		uint64_t reserved_9_39:31;
+		/*
+		 * when {get_rmt ==0 AND get_des_get_tail == 0}, this
+		 * field selects one of eight POW internal-input
+		 * queues (0-7), one per QOS level; values 8-15 are
+		 * illegal in this case; when {get_rmt ==0 AND
+		 * get_des_get_tail == 1}, this field selects one of
+		 * 16 deschedule lists (per group); when get_rmt ==1,
+		 * this field selects one of 16 memory-input queue
+		 * lists.  The two memory-input queue lists associated
+		 * with each QOS level are:
+		 *
+		 * - qosgrp = 0, qosgrp = 8:	  QOS0
+		 * - qosgrp = 1, qosgrp = 9:	  QOS1
+		 * - qosgrp = 2, qosgrp = 10:	  QOS2
+		 * - qosgrp = 3, qosgrp = 11:	  QOS3
+		 * - qosgrp = 4, qosgrp = 12:	  QOS4
+		 * - qosgrp = 5, qosgrp = 13:	  QOS5
+		 * - qosgrp = 6, qosgrp = 14:	  QOS6
+		 * - qosgrp = 7, qosgrp = 15:	  QOS7
+		 */
+		uint64_t qosgrp:4;
+		/*
+		 * If set and get_rmt is clear, return deschedule list
+		 * indexes rather than indexes for the specified qos
+		 * level; if set and get_rmt is set, return the tail
+		 * pointer rather than the head pointer for the
+		 * specified qos level.
+		 */
+		uint64_t get_des_get_tail:1;
+		/*
+		 * If set, return remote pointers rather than the
+		 * local indexes for the specified qos level.
+		 */
+		uint64_t get_rmt:1;
+		/* Must be zero */
+		uint64_t reserved_0_2:3;
+#else
+		uint64_t reserved_0_2:3;
+		uint64_t get_rmt:1;
+		uint64_t get_des_get_tail:1;
+		uint64_t qosgrp:4;
+		uint64_t reserved_9_39:31;
+		uint64_t did:8;
+		uint64_t is_io:1;
+		uint64_t reserved_49_61:13;
+		uint64_t mem_region:2;
+#endif
+	} sindexload;
+
+    /**
+     * address for NULL_RD request (did<2:0> == 4) when this is read,
+     * HW attempts to change the state to NULL if it is NULL_NULL (the
+     * hardware cannot switch from NULL_NULL to NULL if a POW entry is
+     * not available - software may need to recover by finishing
+     * another piece of work before a POW entry can ever become
+     * available.)
+     */
+	struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+		/* Mips64 address region. Should be CVMX_IO_SEG */
+		uint64_t mem_region:2;
+		/* Must be zero */
+		uint64_t reserved_49_61:13;
+		/* Must be one */
+		uint64_t is_io:1;
+		/* the ID of POW -- did<2:0> == 4 in this case */
+		uint64_t did:8;
+		/* Must be zero */
+		uint64_t reserved_0_39:40;
+#else
+		uint64_t reserved_0_39:40;
+		uint64_t did:8;
+		uint64_t is_io:1;
+		uint64_t reserved_49_61:13;
+		uint64_t mem_region:2;
+#endif
+	} snull_rd;
+} cvmx_pow_load_addr_t;
+
+/**
+ * This structure defines the response to a load/SENDSINGLE to POW
+ * (except CSR reads)
+ */
+typedef union {
+	uint64_t u64;
+
+    /**
+     * Response to new work request loads
+     */
+	struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+		/*
+		 * Set when no new work queue entry was returned.  *
+		 * If there was de-scheduled work, the HW will
+		 * definitely return it. When this bit is set, it
+		 * could mean either mean:
+		 *
+		 * - There was no work, or
+		 *
+		 * - There was no work that the HW could find. This
+		 *   case can happen, regardless of the wait bit value
+		 *   in the original request, when there is work in
+		 *   the IQ's that is too deep down the list.
+		 */
+		uint64_t no_work:1;
+		/* Must be zero */
+		uint64_t reserved_40_62:23;
+		/* 36 in O1 -- the work queue pointer */
+		uint64_t addr:40;
+#else
+		uint64_t addr:40;
+		uint64_t reserved_40_62:23;
+		uint64_t no_work:1;
+#endif
+	} s_work;
+
+    /**
+     * Result for a POW Status Load (when get_cur==0 and get_wqp==0)
+     */
+	struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+		uint64_t reserved_62_63:2;
+		/* Set when there is a pending non-NULL SWTAG or
+		 * SWTAG_FULL, and the POW entry has not left the list
+		 * for the original tag. */
+		uint64_t pend_switch:1;
+		/* Set when SWTAG_FULL and pend_switch is set. */
+		uint64_t pend_switch_full:1;
+		/*
+		 * Set when there is a pending NULL SWTAG, or an
+		 * implicit switch to NULL.
+		 */
+		uint64_t pend_switch_null:1;
+		/* Set when there is a pending DESCHED or SWTAG_DESCHED. */
+		uint64_t pend_desched:1;
+		/*
+		 * Set when there is a pending SWTAG_DESCHED and
+		 * pend_desched is set.
+		 */
+		uint64_t pend_desched_switch:1;
+		/* Set when nosched is desired and pend_desched is set. */
+		uint64_t pend_nosched:1;
+		/* Set when there is a pending GET_WORK. */
+		uint64_t pend_new_work:1;
+		/*
+		 * When pend_new_work is set, this bit indicates that
+		 * the wait bit was set.
+		 */
+		uint64_t pend_new_work_wait:1;
+		/* Set when there is a pending NULL_RD. */
+		uint64_t pend_null_rd:1;
+		/* Set when there is a pending CLR_NSCHED. */
+		uint64_t pend_nosched_clr:1;
+		uint64_t reserved_51:1;
+		/* This is the index when pend_nosched_clr is set. */
+		uint64_t pend_index:11;
+		/*
+		 * This is the new_grp when (pend_desched AND
+		 * pend_desched_switch) is set.
+		 */
+		uint64_t pend_grp:4;
+		uint64_t reserved_34_35:2;
+		/*
+		 * This is the tag type when pend_switch or
+		 * (pend_desched AND pend_desched_switch) are set.
+		 */
+		uint64_t pend_type:2;
+		/*
+		 * - this is the tag when pend_switch or (pend_desched
+		 *    AND pend_desched_switch) are set.
+		 */
+		uint64_t pend_tag:32;
+#else
+		uint64_t pend_tag:32;
+		uint64_t pend_type:2;
+		uint64_t reserved_34_35:2;
+		uint64_t pend_grp:4;
+		uint64_t pend_index:11;
+		uint64_t reserved_51:1;
+		uint64_t pend_nosched_clr:1;
+		uint64_t pend_null_rd:1;
+		uint64_t pend_new_work_wait:1;
+		uint64_t pend_new_work:1;
+		uint64_t pend_nosched:1;
+		uint64_t pend_desched_switch:1;
+		uint64_t pend_desched:1;
+		uint64_t pend_switch_null:1;
+		uint64_t pend_switch_full:1;
+		uint64_t pend_switch:1;
+		uint64_t reserved_62_63:2;
+#endif
+	} s_sstatus0;
+
+    /**
+     * Result for a POW Status Load (when get_cur==0 and get_wqp==1)
+     */
+	struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+		uint64_t reserved_62_63:2;
+		/*
+		 * Set when there is a pending non-NULL SWTAG or
+		 * SWTAG_FULL, and the POW entry has not left the list
+		 * for the original tag.
+		 */
+		uint64_t pend_switch:1;
+		/* Set when SWTAG_FULL and pend_switch is set. */
+		uint64_t pend_switch_full:1;
+		/*
+		 * Set when there is a pending NULL SWTAG, or an
+		 * implicit switch to NULL.
+		 */
+		uint64_t pend_switch_null:1;
+		/*
+		 * Set when there is a pending DESCHED or
+		 * SWTAG_DESCHED.
+		 */
+		uint64_t pend_desched:1;
+		/*
+		 * Set when there is a pending SWTAG_DESCHED and
+		 * pend_desched is set.
+		 */
+		uint64_t pend_desched_switch:1;
+		/* Set when nosched is desired and pend_desched is set. */
+		uint64_t pend_nosched:1;
+		/* Set when there is a pending GET_WORK. */
+		uint64_t pend_new_work:1;
+		/*
+		 * When pend_new_work is set, this bit indicates that
+		 * the wait bit was set.
+		 */
+		uint64_t pend_new_work_wait:1;
+		/* Set when there is a pending NULL_RD. */
+		uint64_t pend_null_rd:1;
+		/* Set when there is a pending CLR_NSCHED. */
+		uint64_t pend_nosched_clr:1;
+		uint64_t reserved_51:1;
+		/* This is the index when pend_nosched_clr is set. */
+		uint64_t pend_index:11;
+		/*
+		 * This is the new_grp when (pend_desched AND
+		 * pend_desched_switch) is set.
+		 */
+		uint64_t pend_grp:4;
+		/* This is the wqp when pend_nosched_clr is set. */
+		uint64_t pend_wqp:36;
+#else
+	        uint64_t pend_wqp:36;
+	        uint64_t pend_grp:4;
+	        uint64_t pend_index:11;
+	        uint64_t reserved_51:1;
+	        uint64_t pend_nosched_clr:1;
+	        uint64_t pend_null_rd:1;
+	        uint64_t pend_new_work_wait:1;
+	        uint64_t pend_new_work:1;
+	        uint64_t pend_nosched:1;
+	        uint64_t pend_desched_switch:1;
+	        uint64_t pend_desched:1;
+	        uint64_t pend_switch_null:1;
+	        uint64_t pend_switch_full:1;
+	        uint64_t pend_switch:1;
+	        uint64_t reserved_62_63:2;
+#endif
+	} s_sstatus1;
+
+    /**
+     * Result for a POW Status Load (when get_cur==1, get_wqp==0, and
+     * get_rev==0)
+     */
+	struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+		uint64_t reserved_62_63:2;
+		/*
+		 * Points to the next POW entry in the tag list when
+		 * tail == 0 (and tag_type is not NULL or NULL_NULL).
+		 */
+		uint64_t link_index:11;
+		/* The POW entry attached to the core. */
+		uint64_t index:11;
+		/*
+		 * The group attached to the core (updated when new
+		 * tag list entered on SWTAG_FULL).
+		 */
+		uint64_t grp:4;
+		/*
+		 * Set when this POW entry is at the head of its tag
+		 * list (also set when in the NULL or NULL_NULL
+		 * state).
+		 */
+		uint64_t head:1;
+		/*
+		 * Set when this POW entry is at the tail of its tag
+		 * list (also set when in the NULL or NULL_NULL
+		 * state).
+		 */
+		uint64_t tail:1;
+		/*
+		 * The tag type attached to the core (updated when new
+		 * tag list entered on SWTAG, SWTAG_FULL, or
+		 * SWTAG_DESCHED).
+		 */
+		uint64_t tag_type:2;
+		/*
+		 * The tag attached to the core (updated when new tag
+		 * list entered on SWTAG, SWTAG_FULL, or
+		 * SWTAG_DESCHED).
+		 */
+		uint64_t tag:32;
+#else
+	        uint64_t tag:32;
+	        uint64_t tag_type:2;
+	        uint64_t tail:1;
+	        uint64_t head:1;
+	        uint64_t grp:4;
+	        uint64_t index:11;
+	        uint64_t link_index:11;
+	        uint64_t reserved_62_63:2;
+#endif
+	} s_sstatus2;
+
+    /**
+     * Result for a POW Status Load (when get_cur==1, get_wqp==0, and get_rev==1)
+     */
+	struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+		uint64_t reserved_62_63:2;
+		/*
+		 * Points to the prior POW entry in the tag list when
+		 * head == 0 (and tag_type is not NULL or
+		 * NULL_NULL). This field is unpredictable when the
+		 * core's state is NULL or NULL_NULL.
+		 */
+		uint64_t revlink_index:11;
+		/* The POW entry attached to the core. */
+		uint64_t index:11;
+		/*
+		 * The group attached to the core (updated when new
+		 * tag list entered on SWTAG_FULL).
+		 */
+		uint64_t grp:4;
+		/* Set when this POW entry is at the head of its tag
+		 * list (also set when in the NULL or NULL_NULL
+		 * state).
+		 */
+		uint64_t head:1;
+		/*
+		 * Set when this POW entry is at the tail of its tag
+		 * list (also set when in the NULL or NULL_NULL
+		 * state).
+		 */
+		uint64_t tail:1;
+		/*
+		 * The tag type attached to the core (updated when new
+		 * tag list entered on SWTAG, SWTAG_FULL, or
+		 * SWTAG_DESCHED).
+		 */
+		uint64_t tag_type:2;
+		/*
+		 * The tag attached to the core (updated when new tag
+		 * list entered on SWTAG, SWTAG_FULL, or
+		 * SWTAG_DESCHED).
+		 */
+		uint64_t tag:32;
+#else
+	        uint64_t tag:32;
+	        uint64_t tag_type:2;
+	        uint64_t tail:1;
+	        uint64_t head:1;
+	        uint64_t grp:4;
+	        uint64_t index:11;
+	        uint64_t revlink_index:11;
+	        uint64_t reserved_62_63:2;
+#endif
+	} s_sstatus3;
+
+    /**
+     * Result for a POW Status Load (when get_cur==1, get_wqp==1, and
+     * get_rev==0)
+     */
+	struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+		uint64_t reserved_62_63:2;
+		/*
+		 * Points to the next POW entry in the tag list when
+		 * tail == 0 (and tag_type is not NULL or NULL_NULL).
+		 */
+		uint64_t link_index:11;
+		/* The POW entry attached to the core. */
+		uint64_t index:11;
+		/*
+		 * The group attached to the core (updated when new
+		 * tag list entered on SWTAG_FULL).
+		 */
+		uint64_t grp:4;
+		/*
+		 * The wqp attached to the core (updated when new tag
+		 * list entered on SWTAG_FULL).
+		 */
+		uint64_t wqp:36;
+#else
+	        uint64_t wqp:36;
+	        uint64_t grp:4;
+	        uint64_t index:11;
+	        uint64_t link_index:11;
+	        uint64_t reserved_62_63:2;
+#endif
+	} s_sstatus4;
+
+    /**
+     * Result for a POW Status Load (when get_cur==1, get_wqp==1, and
+     * get_rev==1)
+     */
+	struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+		uint64_t reserved_62_63:2;
+		/*
+		 * Points to the prior POW entry in the tag list when
+		 * head == 0 (and tag_type is not NULL or
+		 * NULL_NULL). This field is unpredictable when the
+		 * core's state is NULL or NULL_NULL.
+		 */
+		uint64_t revlink_index:11;
+		/* The POW entry attached to the core. */
+		uint64_t index:11;
+		/*
+		 * The group attached to the core (updated when new
+		 * tag list entered on SWTAG_FULL).
+		 */
+		uint64_t grp:4;
+		/*
+		 * The wqp attached to the core (updated when new tag
+		 * list entered on SWTAG_FULL).
+		 */
+		uint64_t wqp:36;
+#else
+	        uint64_t wqp:36;
+	        uint64_t grp:4;
+	        uint64_t index:11;
+	        uint64_t revlink_index:11;
+	        uint64_t reserved_62_63:2;
+#endif
+	} s_sstatus5;
+
+    /**
+     * Result For POW Memory Load (get_des == 0 and get_wqp == 0)
+     */
+	struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+		uint64_t reserved_51_63:13;
+		/*
+		 * The next entry in the input, free, descheduled_head
+		 * list (unpredictable if entry is the tail of the
+		 * list).
+		 */
+		uint64_t next_index:11;
+		/* The group of the POW entry. */
+		uint64_t grp:4;
+		uint64_t reserved_35:1;
+		/*
+		 * Set when this POW entry is at the tail of its tag
+		 * list (also set when in the NULL or NULL_NULL
+		 * state).
+		 */
+		uint64_t tail:1;
+		/* The tag type of the POW entry. */
+		uint64_t tag_type:2;
+		/* The tag of the POW entry. */
+		uint64_t tag:32;
+#else
+	        uint64_t tag:32;
+	        uint64_t tag_type:2;
+	        uint64_t tail:1;
+	        uint64_t reserved_35:1;
+	        uint64_t grp:4;
+	        uint64_t next_index:11;
+	        uint64_t reserved_51_63:13;
+#endif
+	} s_smemload0;
+
+    /**
+     * Result For POW Memory Load (get_des == 0 and get_wqp == 1)
+     */
+	struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+		uint64_t reserved_51_63:13;
+		/*
+		 * The next entry in the input, free, descheduled_head
+		 * list (unpredictable if entry is the tail of the
+		 * list).
+		 */
+		uint64_t next_index:11;
+		/* The group of the POW entry. */
+		uint64_t grp:4;
+		/* The WQP held in the POW entry. */
+		uint64_t wqp:36;
+#else
+	        uint64_t wqp:36;
+	        uint64_t grp:4;
+	        uint64_t next_index:11;
+	        uint64_t reserved_51_63:13;
+#endif
+	} s_smemload1;
+
+    /**
+     * Result For POW Memory Load (get_des == 1)
+     */
+	struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+		uint64_t reserved_51_63:13;
+		/*
+		 * The next entry in the tag list connected to the
+		 * descheduled head.
+		 */
+		uint64_t fwd_index:11;
+		/* The group of the POW entry. */
+		uint64_t grp:4;
+		/* The nosched bit for the POW entry. */
+		uint64_t nosched:1;
+		/* There is a pending tag switch */
+		uint64_t pend_switch:1;
+		/*
+		 * The next tag type for the new tag list when
+		 * pend_switch is set.
+		 */
+		uint64_t pend_type:2;
+		/*
+		 * The next tag for the new tag list when pend_switch
+		 * is set.
+		 */
+		uint64_t pend_tag:32;
+#else
+	        uint64_t pend_tag:32;
+	        uint64_t pend_type:2;
+	        uint64_t pend_switch:1;
+	        uint64_t nosched:1;
+	        uint64_t grp:4;
+	        uint64_t fwd_index:11;
+	        uint64_t reserved_51_63:13;
+#endif
+	} s_smemload2;
+
+    /**
+     * Result For POW Index/Pointer Load (get_rmt == 0/get_des_get_tail == 0)
+     */
+	struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+		uint64_t reserved_52_63:12;
+		/*
+		 * set when there is one or more POW entries on the
+		 * free list.
+		 */
+		uint64_t free_val:1;
+		/*
+		 * set when there is exactly one POW entry on the free
+		 * list.
+		 */
+		uint64_t free_one:1;
+		uint64_t reserved_49:1;
+		/*
+		 * when free_val is set, indicates the first entry on
+		 * the free list.
+		 */
+		uint64_t free_head:11;
+		uint64_t reserved_37:1;
+		/*
+		 * when free_val is set, indicates the last entry on
+		 * the free list.
+		 */
+		uint64_t free_tail:11;
+		/*
+		 * set when there is one or more POW entries on the
+		 * input Q list selected by qosgrp.
+		 */
+		uint64_t loc_val:1;
+		/*
+		 * set when there is exactly one POW entry on the
+		 * input Q list selected by qosgrp.
+		 */
+		uint64_t loc_one:1;
+		uint64_t reserved_23:1;
+		/*
+		 * when loc_val is set, indicates the first entry on
+		 * the input Q list selected by qosgrp.
+		 */
+		uint64_t loc_head:11;
+		uint64_t reserved_11:1;
+		/*
+		 * when loc_val is set, indicates the last entry on
+		 * the input Q list selected by qosgrp.
+		 */
+		uint64_t loc_tail:11;
+#else
+	        uint64_t loc_tail:11;
+	        uint64_t reserved_11:1;
+	        uint64_t loc_head:11;
+	        uint64_t reserved_23:1;
+	        uint64_t loc_one:1;
+	        uint64_t loc_val:1;
+	        uint64_t free_tail:11;
+	        uint64_t reserved_37:1;
+	        uint64_t free_head:11;
+	        uint64_t reserved_49:1;
+	        uint64_t free_one:1;
+	        uint64_t free_val:1;
+	        uint64_t reserved_52_63:12;
+#endif
+	} sindexload0;
+
+    /**
+     * Result For POW Index/Pointer Load (get_rmt == 0/get_des_get_tail == 1)
+     */
+	struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+		uint64_t reserved_52_63:12;
+		/*
+		 * set when there is one or more POW entries on the
+		 * nosched list.
+		 */
+		uint64_t nosched_val:1;
+		/*
+		 * set when there is exactly one POW entry on the
+		 * nosched list.
+		 */
+		uint64_t nosched_one:1;
+		uint64_t reserved_49:1;
+		/*
+		 * when nosched_val is set, indicates the first entry
+		 * on the nosched list.
+		 */
+		uint64_t nosched_head:11;
+		uint64_t reserved_37:1;
+		/*
+		 * when nosched_val is set, indicates the last entry
+		 * on the nosched list.
+		 */
+		uint64_t nosched_tail:11;
+		/*
+		 * set when there is one or more descheduled heads on
+		 * the descheduled list selected by qosgrp.
+		 */
+		uint64_t des_val:1;
+		/*
+		 * set when there is exactly one descheduled head on
+		 * the descheduled list selected by qosgrp.
+		 */
+		uint64_t des_one:1;
+		uint64_t reserved_23:1;
+		/*
+		 * when des_val is set, indicates the first
+		 * descheduled head on the descheduled list selected
+		 * by qosgrp.
+		 */
+		uint64_t des_head:11;
+		uint64_t reserved_11:1;
+		/*
+		 * when des_val is set, indicates the last descheduled
+		 * head on the descheduled list selected by qosgrp.
+		 */
+		uint64_t des_tail:11;
+#else
+	        uint64_t des_tail:11;
+	        uint64_t reserved_11:1;
+	        uint64_t des_head:11;
+	        uint64_t reserved_23:1;
+	        uint64_t des_one:1;
+	        uint64_t des_val:1;
+	        uint64_t nosched_tail:11;
+	        uint64_t reserved_37:1;
+	        uint64_t nosched_head:11;
+	        uint64_t reserved_49:1;
+	        uint64_t nosched_one:1;
+	        uint64_t nosched_val:1;
+	        uint64_t reserved_52_63:12;
+#endif
+	} sindexload1;
+
+    /**
+     * Result For POW Index/Pointer Load (get_rmt == 1/get_des_get_tail == 0)
+     */
+	struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+		uint64_t reserved_39_63:25;
+		/*
+		 * Set when this DRAM list is the current head
+		 * (i.e. is the next to be reloaded when the POW
+		 * hardware reloads a POW entry from DRAM). The POW
+		 * hardware alternates between the two DRAM lists
+		 * associated with a QOS level when it reloads work
+		 * from DRAM into the POW unit.
+		 */
+		uint64_t rmt_is_head:1;
+		/*
+		 * Set when the DRAM portion of the input Q list
+		 * selected by qosgrp contains one or more pieces of
+		 * work.
+		 */
+		uint64_t rmt_val:1;
+		/*
+		 * Set when the DRAM portion of the input Q list
+		 * selected by qosgrp contains exactly one piece of
+		 * work.
+		 */
+		uint64_t rmt_one:1;
+		/*
+		 * When rmt_val is set, indicates the first piece of
+		 * work on the DRAM input Q list selected by
+		 * qosgrp.
+		 */
+		uint64_t rmt_head:36;
+#else
+	        uint64_t rmt_head:36;
+	        uint64_t rmt_one:1;
+	        uint64_t rmt_val:1;
+	        uint64_t rmt_is_head:1;
+	        uint64_t reserved_39_63:25;
+#endif
+	} sindexload2;
+
+    /**
+     * Result For POW Index/Pointer Load (get_rmt ==
+     * 1/get_des_get_tail == 1)
+     */
+	struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+		uint64_t reserved_39_63:25;
+		/*
+		 * set when this DRAM list is the current head
+		 * (i.e. is the next to be reloaded when the POW
+		 * hardware reloads a POW entry from DRAM). The POW
+		 * hardware alternates between the two DRAM lists
+		 * associated with a QOS level when it reloads work
+		 * from DRAM into the POW unit.
+		 */
+		uint64_t rmt_is_head:1;
+		/*
+		 * set when the DRAM portion of the input Q list
+		 * selected by qosgrp contains one or more pieces of
+		 * work.
+		 */
+		uint64_t rmt_val:1;
+		/*
+		 * set when the DRAM portion of the input Q list
+		 * selected by qosgrp contains exactly one piece of
+		 * work.
+		 */
+		uint64_t rmt_one:1;
+		/*
+		 * when rmt_val is set, indicates the last piece of
+		 * work on the DRAM input Q list selected by
+		 * qosgrp.
+		 */
+		uint64_t rmt_tail:36;
+#else
+	        uint64_t rmt_tail:36;
+	        uint64_t rmt_one:1;
+	        uint64_t rmt_val:1;
+	        uint64_t rmt_is_head:1;
+	        uint64_t reserved_39_63:25;
+#endif
+	} sindexload3;
+
+    /**
+     * Response to NULL_RD request loads
+     */
+	struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+		uint64_t unused:62;
+		/* of type cvmx_pow_tag_type_t. state is one of the
+		 * following:
+		 *
+		 * - CVMX_POW_TAG_TYPE_ORDERED
+		 * - CVMX_POW_TAG_TYPE_ATOMIC
+		 * - CVMX_POW_TAG_TYPE_NULL
+		 * - CVMX_POW_TAG_TYPE_NULL_NULL
+		 */
+		uint64_t state:2;
+#else
+	        uint64_t state:2;
+	        uint64_t unused:62;
+#endif
+	} s_null_rd;
+
+} cvmx_pow_tag_load_resp_t;
+
+/**
+ * This structure describes the address used for stores to the POW.
+ *  The store address is meaningful on stores to the POW.  The
+ *  hardware assumes that an aligned 64-bit store was used for all
+ *  these stores.  Note the assumption that the work queue entry is
+ *  aligned on an 8-byte boundary (since the low-order 3 address bits
+ *  must be zero).  Note that not all fields are used by all
+ *  operations.
+ *
+ *  NOTE: The following is the behavior of the pending switch bit at the PP
+ *	 for POW stores (i.e. when did<7:3> == 0xc)
+ *     - did<2:0> == 0	    => pending switch bit is set
+ *     - did<2:0> == 1	    => no affect on the pending switch bit
+ *     - did<2:0> == 3	    => pending switch bit is cleared
+ *     - did<2:0> == 7	    => no affect on the pending switch bit
+ *     - did<2:0> == others => must not be used
+ *     - No other loads/stores have an affect on the pending switch bit
+ *     - The switch bus from POW can clear the pending switch bit
+ *
+ *  NOTE: did<2:0> == 2 is used by the HW for a special single-cycle
+ *  ADDWQ command that only contains the pointer). SW must never use
+ *  did<2:0> == 2.
+ */
+typedef union {
+    /**
+     * Unsigned 64 bit integer representation of store address
+     */
+	uint64_t u64;
+
+	struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+		/* Memory region.  Should be CVMX_IO_SEG in most cases */
+		uint64_t mem_reg:2;
+		uint64_t reserved_49_61:13;	/* Must be zero */
+		uint64_t is_io:1;	/* Must be one */
+		/* Device ID of POW.  Note that different sub-dids are used. */
+		uint64_t did:8;
+		uint64_t reserved_36_39:4;	/* Must be zero */
+		/* Address field. addr<2:0> must be zero */
+		uint64_t addr:36;
+#else
+	        uint64_t addr:36;
+	        uint64_t reserved_36_39:4;
+	        uint64_t did:8;
+	        uint64_t is_io:1;
+	        uint64_t reserved_49_61:13;
+	        uint64_t mem_reg:2;
+#endif
+	} stag;
+} cvmx_pow_tag_store_addr_t;
+
+/**
+ * decode of the store data when an IOBDMA SENDSINGLE is sent to POW
+ */
+typedef union {
+	uint64_t u64;
+
+	struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+		/*
+		 * the (64-bit word) location in scratchpad to write
+		 * to (if len != 0)
+		 */
+		uint64_t scraddr:8;
+		/* the number of words in the response (0 => no response) */
+		uint64_t len:8;
+		/* the ID of the device on the non-coherent bus */
+		uint64_t did:8;
+		uint64_t unused:36;
+		/* if set, don't return load response until work is available */
+		uint64_t wait:1;
+		uint64_t unused2:3;
+#else
+	        uint64_t unused2:3;
+	        uint64_t wait:1;
+	        uint64_t unused:36;
+	        uint64_t did:8;
+	        uint64_t len:8;
+	        uint64_t scraddr:8;
+#endif
+	} s;
+
+} cvmx_pow_iobdma_store_t;
+
+/* CSR typedefs have been moved to cvmx-csr-*.h */
+
+/**
+ * Get the POW tag for this core. This returns the current
+ * tag type, tag, group, and POW entry index associated with
+ * this core. Index is only valid if the tag type isn't NULL_NULL.
+ * If a tag switch is pending this routine returns the tag before
+ * the tag switch, not after.
+ *
+ * Returns Current tag
+ */
+static inline cvmx_pow_tag_req_t cvmx_pow_get_current_tag(void)
+{
+	cvmx_pow_load_addr_t load_addr;
+	cvmx_pow_tag_load_resp_t load_resp;
+	cvmx_pow_tag_req_t result;
+
+	load_addr.u64 = 0;
+	load_addr.sstatus.mem_region = CVMX_IO_SEG;
+	load_addr.sstatus.is_io = 1;
+	load_addr.sstatus.did = CVMX_OCT_DID_TAG_TAG1;
+	load_addr.sstatus.coreid = cvmx_get_core_num();
+	load_addr.sstatus.get_cur = 1;
+	load_resp.u64 = cvmx_read_csr(load_addr.u64);
+	result.u64 = 0;
+	result.s.grp = load_resp.s_sstatus2.grp;
+	result.s.index = load_resp.s_sstatus2.index;
+	result.s.type = load_resp.s_sstatus2.tag_type;
+	result.s.tag = load_resp.s_sstatus2.tag;
+	return result;
+}
+
+/**
+ * Get the POW WQE for this core. This returns the work queue
+ * entry currently associated with this core.
+ *
+ * Returns WQE pointer
+ */
+static inline struct cvmx_wqe *cvmx_pow_get_current_wqp(void)
+{
+	cvmx_pow_load_addr_t load_addr;
+	cvmx_pow_tag_load_resp_t load_resp;
+
+	load_addr.u64 = 0;
+	load_addr.sstatus.mem_region = CVMX_IO_SEG;
+	load_addr.sstatus.is_io = 1;
+	load_addr.sstatus.did = CVMX_OCT_DID_TAG_TAG1;
+	load_addr.sstatus.coreid = cvmx_get_core_num();
+	load_addr.sstatus.get_cur = 1;
+	load_addr.sstatus.get_wqp = 1;
+	load_resp.u64 = cvmx_read_csr(load_addr.u64);
+	return (struct cvmx_wqe *) cvmx_phys_to_ptr(load_resp.s_sstatus4.wqp);
+}
+
+#ifndef CVMX_MF_CHORD
+#define CVMX_MF_CHORD(dest)	    CVMX_RDHWR(dest, 30)
+#endif
+
+/**
+ * Print a warning if a tag switch is pending for this core
+ *
+ * @function: Function name checking for a pending tag switch
+ */
+static inline void __cvmx_pow_warn_if_pending_switch(const char *function)
+{
+	uint64_t switch_complete;
+	CVMX_MF_CHORD(switch_complete);
+	if (!switch_complete)
+		pr_warn("%s called with tag switch in progress\n", function);
+}
+
+/**
+ * Waits for a tag switch to complete by polling the completion bit.
+ * Note that switches to NULL complete immediately and do not need
+ * to be waited for.
+ */
+static inline void cvmx_pow_tag_sw_wait(void)
+{
+	const uint64_t MAX_CYCLES = 1ull << 31;
+	uint64_t switch_complete;
+	uint64_t start_cycle = cvmx_get_cycle();
+	while (1) {
+		CVMX_MF_CHORD(switch_complete);
+		if (unlikely(switch_complete))
+			break;
+		if (unlikely(cvmx_get_cycle() > start_cycle + MAX_CYCLES)) {
+			pr_warn("Tag switch is taking a long time, possible deadlock\n");
+			start_cycle = -MAX_CYCLES - 1;
+		}
+	}
+}
+
+/**
+ * Synchronous work request.  Requests work from the POW.
+ * This function does NOT wait for previous tag switches to complete,
+ * so the caller must ensure that there is not a pending tag switch.
+ *
+ * @wait:   When set, call stalls until work becomes avaiable, or times out.
+ *		 If not set, returns immediately.
+ *
+ * Returns: the WQE pointer from POW. Returns NULL if no work
+ * was available.
+ */
+static inline struct cvmx_wqe *cvmx_pow_work_request_sync_nocheck(cvmx_pow_wait_t
+							     wait)
+{
+	cvmx_pow_load_addr_t ptr;
+	cvmx_pow_tag_load_resp_t result;
+
+	if (CVMX_ENABLE_POW_CHECKS)
+		__cvmx_pow_warn_if_pending_switch(__func__);
+
+	ptr.u64 = 0;
+	ptr.swork.mem_region = CVMX_IO_SEG;
+	ptr.swork.is_io = 1;
+	ptr.swork.did = CVMX_OCT_DID_TAG_SWTAG;
+	ptr.swork.wait = wait;
+
+	result.u64 = cvmx_read_csr(ptr.u64);
+
+	if (result.s_work.no_work)
+		return NULL;
+	else
+		return (struct cvmx_wqe *) cvmx_phys_to_ptr(result.s_work.addr);
+}
+
+/**
+ * Synchronous work request.  Requests work from the POW.
+ * This function waits for any previous tag switch to complete before
+ * requesting the new work.
+ *
+ * @wait:   When set, call stalls until work becomes avaiable, or times out.
+ *		 If not set, returns immediately.
+ *
+ * Returns: the WQE pointer from POW. Returns NULL if no work
+ * was available.
+ */
+static inline struct cvmx_wqe *cvmx_pow_work_request_sync(cvmx_pow_wait_t wait)
+{
+	if (CVMX_ENABLE_POW_CHECKS)
+		__cvmx_pow_warn_if_pending_switch(__func__);
+
+	/* Must not have a switch pending when requesting work */
+	cvmx_pow_tag_sw_wait();
+	return cvmx_pow_work_request_sync_nocheck(wait);
+
+}
+
+/**
+ * Synchronous null_rd request.	 Requests a switch out of NULL_NULL POW state.
+ * This function waits for any previous tag switch to complete before
+ * requesting the null_rd.
+ *
+ * Returns: the POW state of type cvmx_pow_tag_type_t.
+ */
+static inline enum cvmx_pow_tag_type cvmx_pow_work_request_null_rd(void)
+{
+	cvmx_pow_load_addr_t ptr;
+	cvmx_pow_tag_load_resp_t result;
+
+	if (CVMX_ENABLE_POW_CHECKS)
+		__cvmx_pow_warn_if_pending_switch(__func__);
+
+	/* Must not have a switch pending when requesting work */
+	cvmx_pow_tag_sw_wait();
+
+	ptr.u64 = 0;
+	ptr.snull_rd.mem_region = CVMX_IO_SEG;
+	ptr.snull_rd.is_io = 1;
+	ptr.snull_rd.did = CVMX_OCT_DID_TAG_NULL_RD;
+
+	result.u64 = cvmx_read_csr(ptr.u64);
+
+	return (enum cvmx_pow_tag_type) result.s_null_rd.state;
+}
+
+/**
+ * Asynchronous work request.  Work is requested from the POW unit,
+ * and should later be checked with function
+ * cvmx_pow_work_response_async.  This function does NOT wait for
+ * previous tag switches to complete, so the caller must ensure that
+ * there is not a pending tag switch.
+ *
+ * @scr_addr: Scratch memory address that response will be returned
+ *	      to, which is either a valid WQE, or a response with the
+ *	      invalid bit set.	Byte address, must be 8 byte aligned.
+ *
+ * @wait: 1 to cause response to wait for work to become available (or
+ *	  timeout), 0 to cause response to return immediately
+ */
+static inline void cvmx_pow_work_request_async_nocheck(int scr_addr,
+						       cvmx_pow_wait_t wait)
+{
+	cvmx_pow_iobdma_store_t data;
+
+	if (CVMX_ENABLE_POW_CHECKS)
+		__cvmx_pow_warn_if_pending_switch(__func__);
+
+	/* scr_addr must be 8 byte aligned */
+	data.s.scraddr = scr_addr >> 3;
+	data.s.len = 1;
+	data.s.did = CVMX_OCT_DID_TAG_SWTAG;
+	data.s.wait = wait;
+	cvmx_send_single(data.u64);
+}
+
+/**
+ * Asynchronous work request.  Work is requested from the POW unit,
+ * and should later be checked with function
+ * cvmx_pow_work_response_async.  This function waits for any previous
+ * tag switch to complete before requesting the new work.
+ *
+ * @scr_addr: Scratch memory address that response will be returned
+ *	      to, which is either a valid WQE, or a response with the
+ *	      invalid bit set.	Byte address, must be 8 byte aligned.
+ *
+ * @wait: 1 to cause response to wait for work to become available (or
+ *		    timeout), 0 to cause response to return immediately
+ */
+static inline void cvmx_pow_work_request_async(int scr_addr,
+					       cvmx_pow_wait_t wait)
+{
+	if (CVMX_ENABLE_POW_CHECKS)
+		__cvmx_pow_warn_if_pending_switch(__func__);
+
+	/* Must not have a switch pending when requesting work */
+	cvmx_pow_tag_sw_wait();
+	cvmx_pow_work_request_async_nocheck(scr_addr, wait);
+}
+
+/**
+ * Gets result of asynchronous work request.  Performs a IOBDMA sync
+ * to wait for the response.
+ *
+ * @scr_addr: Scratch memory address to get result from Byte address,
+ *	      must be 8 byte aligned.
+ *
+ * Returns: the WQE from the scratch register, or NULL if no
+ * work was available.
+ */
+static inline struct cvmx_wqe *cvmx_pow_work_response_async(int scr_addr)
+{
+	cvmx_pow_tag_load_resp_t result;
+
+	CVMX_SYNCIOBDMA;
+	result.u64 = cvmx_scratch_read64(scr_addr);
+
+	if (result.s_work.no_work)
+		return NULL;
+	else
+		return (struct cvmx_wqe *) cvmx_phys_to_ptr(result.s_work.addr);
+}
+
+/**
+ * Checks if a work queue entry pointer returned by a work
+ * request is valid.  It may be invalid due to no work
+ * being available or due to a timeout.
+ *
+ * @wqe_ptr: pointer to a work queue entry returned by the POW
+ *
+ * Returns 0 if pointer is valid
+ *	   1 if invalid (no work was returned)
+ */
+static inline uint64_t cvmx_pow_work_invalid(struct cvmx_wqe *wqe_ptr)
+{
+	return wqe_ptr == NULL;
+}
+
+/**
+ * Starts a tag switch to the provided tag value and tag type.
+ * Completion for the tag switch must be checked for separately.  This
+ * function does NOT update the work queue entry in dram to match tag
+ * value and type, so the application must keep track of these if they
+ * are important to the application.  This tag switch command must not
+ * be used for switches to NULL, as the tag switch pending bit will be
+ * set by the switch request, but never cleared by the hardware.
+ *
+ * NOTE: This should not be used when switching from a NULL tag.  Use
+ * cvmx_pow_tag_sw_full() instead.
+ *
+ * This function does no checks, so the caller must ensure that any
+ * previous tag switch has completed.
+ *
+ * @tag:      new tag value
+ * @tag_type: new tag type (ordered or atomic)
+ */
+static inline void cvmx_pow_tag_sw_nocheck(uint32_t tag,
+					   enum cvmx_pow_tag_type tag_type)
+{
+	cvmx_addr_t ptr;
+	cvmx_pow_tag_req_t tag_req;
+
+	if (CVMX_ENABLE_POW_CHECKS) {
+		cvmx_pow_tag_req_t current_tag;
+		__cvmx_pow_warn_if_pending_switch(__func__);
+		current_tag = cvmx_pow_get_current_tag();
+		if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL_NULL)
+			pr_warn("%s called with NULL_NULL tag\n", __func__);
+		if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL)
+			pr_warn("%s called with NULL tag\n", __func__);
+		if ((current_tag.s.type == tag_type)
+		   && (current_tag.s.tag == tag))
+			pr_warn("%s called to perform a tag switch to the same tag\n",
+				__func__);
+		if (tag_type == CVMX_POW_TAG_TYPE_NULL)
+			pr_warn("%s called to perform a tag switch to NULL. Use cvmx_pow_tag_sw_null() instead\n",
+				__func__);
+	}
+
+	/*
+	 * Note that WQE in DRAM is not updated here, as the POW does
+	 * not read from DRAM once the WQE is in flight.  See hardware
+	 * manual for complete details.	 It is the application's
+	 * responsibility to keep track of the current tag value if
+	 * that is important.
+	 */
+
+	tag_req.u64 = 0;
+	tag_req.s.op = CVMX_POW_TAG_OP_SWTAG;
+	tag_req.s.tag = tag;
+	tag_req.s.type = tag_type;
+
+	ptr.u64 = 0;
+	ptr.sio.mem_region = CVMX_IO_SEG;
+	ptr.sio.is_io = 1;
+	ptr.sio.did = CVMX_OCT_DID_TAG_SWTAG;
+
+	/* once this store arrives at POW, it will attempt the switch
+	   software must wait for the switch to complete separately */
+	cvmx_write_io(ptr.u64, tag_req.u64);
+}
+
+/**
+ * Starts a tag switch to the provided tag value and tag type.
+ * Completion for the tag switch must be checked for separately.  This
+ * function does NOT update the work queue entry in dram to match tag
+ * value and type, so the application must keep track of these if they
+ * are important to the application.  This tag switch command must not
+ * be used for switches to NULL, as the tag switch pending bit will be
+ * set by the switch request, but never cleared by the hardware.
+ *
+ * NOTE: This should not be used when switching from a NULL tag.  Use
+ * cvmx_pow_tag_sw_full() instead.
+ *
+ * This function waits for any previous tag switch to complete, and also
+ * displays an error on tag switches to NULL.
+ *
+ * @tag:      new tag value
+ * @tag_type: new tag type (ordered or atomic)
+ */
+static inline void cvmx_pow_tag_sw(uint32_t tag,
+				   enum cvmx_pow_tag_type tag_type)
+{
+	if (CVMX_ENABLE_POW_CHECKS)
+		__cvmx_pow_warn_if_pending_switch(__func__);
+
+	/*
+	 * Note that WQE in DRAM is not updated here, as the POW does
+	 * not read from DRAM once the WQE is in flight.  See hardware
+	 * manual for complete details.	 It is the application's
+	 * responsibility to keep track of the current tag value if
+	 * that is important.
+	 */
+
+	/*
+	 * Ensure that there is not a pending tag switch, as a tag
+	 * switch cannot be started if a previous switch is still
+	 * pending.
+	 */
+	cvmx_pow_tag_sw_wait();
+	cvmx_pow_tag_sw_nocheck(tag, tag_type);
+}
+
+/**
+ * Starts a tag switch to the provided tag value and tag type.
+ * Completion for the tag switch must be checked for separately.  This
+ * function does NOT update the work queue entry in dram to match tag
+ * value and type, so the application must keep track of these if they
+ * are important to the application.  This tag switch command must not
+ * be used for switches to NULL, as the tag switch pending bit will be
+ * set by the switch request, but never cleared by the hardware.
+ *
+ * This function must be used for tag switches from NULL.
+ *
+ * This function does no checks, so the caller must ensure that any
+ * previous tag switch has completed.
+ *
+ * @wqp:      pointer to work queue entry to submit.  This entry is
+ *	      updated to match the other parameters
+ * @tag:      tag value to be assigned to work queue entry
+ * @tag_type: type of tag
+ * @group:    group value for the work queue entry.
+ */
+static inline void cvmx_pow_tag_sw_full_nocheck(struct cvmx_wqe *wqp, uint32_t tag,
+						enum cvmx_pow_tag_type tag_type,
+						uint64_t group)
+{
+	cvmx_addr_t ptr;
+	cvmx_pow_tag_req_t tag_req;
+
+	if (CVMX_ENABLE_POW_CHECKS) {
+		cvmx_pow_tag_req_t current_tag;
+		__cvmx_pow_warn_if_pending_switch(__func__);
+		current_tag = cvmx_pow_get_current_tag();
+		if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL_NULL)
+			pr_warn("%s called with NULL_NULL tag\n", __func__);
+		if ((current_tag.s.type == tag_type)
+		   && (current_tag.s.tag == tag))
+			pr_warn("%s called to perform a tag switch to the same tag\n",
+				__func__);
+		if (tag_type == CVMX_POW_TAG_TYPE_NULL)
+			pr_warn("%s called to perform a tag switch to NULL. Use cvmx_pow_tag_sw_null() instead\n",
+				__func__);
+		if (wqp != cvmx_phys_to_ptr(0x80))
+			if (wqp != cvmx_pow_get_current_wqp())
+				pr_warn("%s passed WQE(%p) doesn't match the address in the POW(%p)\n",
+					__func__, wqp,
+					cvmx_pow_get_current_wqp());
+	}
+
+	/*
+	 * Note that WQE in DRAM is not updated here, as the POW does
+	 * not read from DRAM once the WQE is in flight.  See hardware
+	 * manual for complete details.	 It is the application's
+	 * responsibility to keep track of the current tag value if
+	 * that is important.
+	 */
+
+	tag_req.u64 = 0;
+	tag_req.s.op = CVMX_POW_TAG_OP_SWTAG_FULL;
+	tag_req.s.tag = tag;
+	tag_req.s.type = tag_type;
+	tag_req.s.grp = group;
+
+	ptr.u64 = 0;
+	ptr.sio.mem_region = CVMX_IO_SEG;
+	ptr.sio.is_io = 1;
+	ptr.sio.did = CVMX_OCT_DID_TAG_SWTAG;
+	ptr.sio.offset = CAST64(wqp);
+
+	/*
+	 * once this store arrives at POW, it will attempt the switch
+	 * software must wait for the switch to complete separately.
+	 */
+	cvmx_write_io(ptr.u64, tag_req.u64);
+}
+
+/**
+ * Starts a tag switch to the provided tag value and tag type.
+ * Completion for the tag switch must be checked for separately.  This
+ * function does NOT update the work queue entry in dram to match tag
+ * value and type, so the application must keep track of these if they
+ * are important to the application.  This tag switch command must not
+ * be used for switches to NULL, as the tag switch pending bit will be
+ * set by the switch request, but never cleared by the hardware.
+ *
+ * This function must be used for tag switches from NULL.
+ *
+ * This function waits for any pending tag switches to complete
+ * before requesting the tag switch.
+ *
+ * @wqp:      pointer to work queue entry to submit.  This entry is updated
+ *	      to match the other parameters
+ * @tag:      tag value to be assigned to work queue entry
+ * @tag_type: type of tag
+ * @group:	group value for the work queue entry.
+ */
+static inline void cvmx_pow_tag_sw_full(struct cvmx_wqe *wqp, uint32_t tag,
+					enum cvmx_pow_tag_type tag_type,
+					uint64_t group)
+{
+	if (CVMX_ENABLE_POW_CHECKS)
+		__cvmx_pow_warn_if_pending_switch(__func__);
+
+	/*
+	 * Ensure that there is not a pending tag switch, as a tag
+	 * switch cannot be started if a previous switch is still
+	 * pending.
+	 */
+	cvmx_pow_tag_sw_wait();
+	cvmx_pow_tag_sw_full_nocheck(wqp, tag, tag_type, group);
+}
+
+/**
+ * Switch to a NULL tag, which ends any ordering or
+ * synchronization provided by the POW for the current
+ * work queue entry.  This operation completes immediately,
+ * so completion should not be waited for.
+ * This function does NOT wait for previous tag switches to complete,
+ * so the caller must ensure that any previous tag switches have completed.
+ */
+static inline void cvmx_pow_tag_sw_null_nocheck(void)
+{
+	cvmx_addr_t ptr;
+	cvmx_pow_tag_req_t tag_req;
+
+	if (CVMX_ENABLE_POW_CHECKS) {
+		cvmx_pow_tag_req_t current_tag;
+		__cvmx_pow_warn_if_pending_switch(__func__);
+		current_tag = cvmx_pow_get_current_tag();
+		if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL_NULL)
+			pr_warn("%s called with NULL_NULL tag\n", __func__);
+		if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL)
+			pr_warn("%s called when we already have a NULL tag\n",
+				__func__);
+	}
+
+	tag_req.u64 = 0;
+	tag_req.s.op = CVMX_POW_TAG_OP_SWTAG;
+	tag_req.s.type = CVMX_POW_TAG_TYPE_NULL;
+
+	ptr.u64 = 0;
+	ptr.sio.mem_region = CVMX_IO_SEG;
+	ptr.sio.is_io = 1;
+	ptr.sio.did = CVMX_OCT_DID_TAG_TAG1;
+
+	cvmx_write_io(ptr.u64, tag_req.u64);
+
+	/* switch to NULL completes immediately */
+}
+
+/**
+ * Switch to a NULL tag, which ends any ordering or
+ * synchronization provided by the POW for the current
+ * work queue entry.  This operation completes immediately,
+ * so completion should not be waited for.
+ * This function waits for any pending tag switches to complete
+ * before requesting the switch to NULL.
+ */
+static inline void cvmx_pow_tag_sw_null(void)
+{
+	if (CVMX_ENABLE_POW_CHECKS)
+		__cvmx_pow_warn_if_pending_switch(__func__);
+
+	/*
+	 * Ensure that there is not a pending tag switch, as a tag
+	 * switch cannot be started if a previous switch is still
+	 * pending.
+	 */
+	cvmx_pow_tag_sw_wait();
+	cvmx_pow_tag_sw_null_nocheck();
+
+	/* switch to NULL completes immediately */
+}
+
+/**
+ * Submits work to an input queue.  This function updates the work
+ * queue entry in DRAM to match the arguments given.  Note that the
+ * tag provided is for the work queue entry submitted, and is
+ * unrelated to the tag that the core currently holds.
+ *
+ * @wqp:      pointer to work queue entry to submit.  This entry is
+ *	      updated to match the other parameters
+ * @tag:      tag value to be assigned to work queue entry
+ * @tag_type: type of tag
+ * @qos:      Input queue to add to.
+ * @grp:      group value for the work queue entry.
+ */
+static inline void cvmx_pow_work_submit(struct cvmx_wqe *wqp, uint32_t tag,
+					enum cvmx_pow_tag_type tag_type,
+					uint64_t qos, uint64_t grp)
+{
+	cvmx_addr_t ptr;
+	cvmx_pow_tag_req_t tag_req;
+
+	wqp->word1.tag = tag;
+	wqp->word1.tag_type = tag_type;
+
+	cvmx_wqe_set_qos(wqp, qos);
+	cvmx_wqe_set_grp(wqp, grp);
+
+	tag_req.u64 = 0;
+	tag_req.s.op = CVMX_POW_TAG_OP_ADDWQ;
+	tag_req.s.type = tag_type;
+	tag_req.s.tag = tag;
+	tag_req.s.qos = qos;
+	tag_req.s.grp = grp;
+
+	ptr.u64 = 0;
+	ptr.sio.mem_region = CVMX_IO_SEG;
+	ptr.sio.is_io = 1;
+	ptr.sio.did = CVMX_OCT_DID_TAG_TAG1;
+	ptr.sio.offset = cvmx_ptr_to_phys(wqp);
+
+	/*
+	 * SYNC write to memory before the work submit.	 This is
+	 * necessary as POW may read values from DRAM at this time.
+	 */
+	CVMX_SYNCWS;
+	cvmx_write_io(ptr.u64, tag_req.u64);
+}
+
+/**
+ * This function sets the group mask for a core.  The group mask
+ * indicates which groups each core will accept work from. There are
+ * 16 groups.
+ *
+ * @core_num:	core to apply mask to
+ * @mask:   Group mask. There are 16 groups, so only bits 0-15 are valid,
+ *		 representing groups 0-15.
+ *		 Each 1 bit in the mask enables the core to accept work from
+ *		 the corresponding group.
+ */
+static inline void cvmx_pow_set_group_mask(uint64_t core_num, uint64_t mask)
+{
+	union cvmx_pow_pp_grp_mskx grp_msk;
+
+	grp_msk.u64 = cvmx_read_csr(CVMX_POW_PP_GRP_MSKX(core_num));
+	grp_msk.s.grp_msk = mask;
+	cvmx_write_csr(CVMX_POW_PP_GRP_MSKX(core_num), grp_msk.u64);
+}
+
+/**
+ * This function sets POW static priorities for a core. Each input queue has
+ * an associated priority value.
+ *
+ * @core_num:	core to apply priorities to
+ * @priority:	Vector of 8 priorities, one per POW Input Queue (0-7).
+ *		     Highest priority is 0 and lowest is 7. A priority value
+ *		     of 0xF instructs POW to skip the Input Queue when
+ *		     scheduling to this specific core.
+ *		     NOTE: priorities should not have gaps in values, meaning
+ *			   {0,1,1,1,1,1,1,1} is a valid configuration while
+ *			   {0,2,2,2,2,2,2,2} is not.
+ */
+static inline void cvmx_pow_set_priority(uint64_t core_num,
+					 const uint8_t priority[])
+{
+	/* POW priorities are supported on CN5xxx and later */
+	if (!OCTEON_IS_MODEL(OCTEON_CN3XXX)) {
+		union cvmx_pow_pp_grp_mskx grp_msk;
+
+		grp_msk.u64 = cvmx_read_csr(CVMX_POW_PP_GRP_MSKX(core_num));
+		grp_msk.s.qos0_pri = priority[0];
+		grp_msk.s.qos1_pri = priority[1];
+		grp_msk.s.qos2_pri = priority[2];
+		grp_msk.s.qos3_pri = priority[3];
+		grp_msk.s.qos4_pri = priority[4];
+		grp_msk.s.qos5_pri = priority[5];
+		grp_msk.s.qos6_pri = priority[6];
+		grp_msk.s.qos7_pri = priority[7];
+
+		/* Detect gaps between priorities and flag error */
+		{
+			int i;
+			uint32_t prio_mask = 0;
+
+			for (i = 0; i < 8; i++)
+				if (priority[i] != 0xF)
+					prio_mask |= 1 << priority[i];
+
+			if (prio_mask ^ ((1 << cvmx_pop(prio_mask)) - 1)) {
+				pr_err("POW static priorities should be "
+				       "contiguous (0x%llx)\n",
+				     (unsigned long long)prio_mask);
+				return;
+			}
+		}
+
+		cvmx_write_csr(CVMX_POW_PP_GRP_MSKX(core_num), grp_msk.u64);
+	}
+}
+
+/**
+ * Performs a tag switch and then an immediate deschedule. This completes
+ * immediately, so completion must not be waited for.  This function does NOT
+ * update the wqe in DRAM to match arguments.
+ *
+ * This function does NOT wait for any prior tag switches to complete, so the
+ * calling code must do this.
+ *
+ * Note the following CAVEAT of the Octeon HW behavior when
+ * re-scheduling DE-SCHEDULEd items whose (next) state is
+ * ORDERED:
+ *   - If there are no switches pending at the time that the
+ *     HW executes the de-schedule, the HW will only re-schedule
+ *     the head of the FIFO associated with the given tag. This
+ *     means that in many respects, the HW treats this ORDERED
+ *     tag as an ATOMIC tag. Note that in the SWTAG_DESCH
+ *     case (to an ORDERED tag), the HW will do the switch
+ *     before the deschedule whenever it is possible to do
+ *     the switch immediately, so it may often look like
+ *     this case.
+ *   - If there is a pending switch to ORDERED at the time
+ *     the HW executes the de-schedule, the HW will perform
+ *     the switch at the time it re-schedules, and will be
+ *     able to reschedule any/all of the entries with the
+ *     same tag.
+ * Due to this behavior, the RECOMMENDATION to software is
+ * that they have a (next) state of ATOMIC when they
+ * DE-SCHEDULE. If an ORDERED tag is what was really desired,
+ * SW can choose to immediately switch to an ORDERED tag
+ * after the work (that has an ATOMIC tag) is re-scheduled.
+ * Note that since there are never any tag switches pending
+ * when the HW re-schedules, this switch can be IMMEDIATE upon
+ * the reception of the pointer during the re-schedule.
+ *
+ * @tag:      New tag value
+ * @tag_type: New tag type
+ * @group:    New group value
+ * @no_sched: Control whether this work queue entry will be rescheduled.
+ *		   - 1 : don't schedule this work
+ *		   - 0 : allow this work to be scheduled.
+ */
+static inline void cvmx_pow_tag_sw_desched_nocheck(
+	uint32_t tag,
+	enum cvmx_pow_tag_type tag_type,
+	uint64_t group,
+	uint64_t no_sched)
+{
+	cvmx_addr_t ptr;
+	cvmx_pow_tag_req_t tag_req;
+
+	if (CVMX_ENABLE_POW_CHECKS) {
+		cvmx_pow_tag_req_t current_tag;
+		__cvmx_pow_warn_if_pending_switch(__func__);
+		current_tag = cvmx_pow_get_current_tag();
+		if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL_NULL)
+			pr_warn("%s called with NULL_NULL tag\n", __func__);
+		if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL)
+			pr_warn("%s called with NULL tag. Deschedule not allowed from NULL state\n",
+				__func__);
+		if ((current_tag.s.type != CVMX_POW_TAG_TYPE_ATOMIC)
+			&& (tag_type != CVMX_POW_TAG_TYPE_ATOMIC))
+			pr_warn("%s called where neither the before or after tag is ATOMIC\n",
+				__func__);
+	}
+
+	tag_req.u64 = 0;
+	tag_req.s.op = CVMX_POW_TAG_OP_SWTAG_DESCH;
+	tag_req.s.tag = tag;
+	tag_req.s.type = tag_type;
+	tag_req.s.grp = group;
+	tag_req.s.no_sched = no_sched;
+
+	ptr.u64 = 0;
+	ptr.sio.mem_region = CVMX_IO_SEG;
+	ptr.sio.is_io = 1;
+	ptr.sio.did = CVMX_OCT_DID_TAG_TAG3;
+	/*
+	 * since TAG3 is used, this store will clear the local pending
+	 * switch bit.
+	 */
+	cvmx_write_io(ptr.u64, tag_req.u64);
+}
+
+/**
+ * Performs a tag switch and then an immediate deschedule. This completes
+ * immediately, so completion must not be waited for.  This function does NOT
+ * update the wqe in DRAM to match arguments.
+ *
+ * This function waits for any prior tag switches to complete, so the
+ * calling code may call this function with a pending tag switch.
+ *
+ * Note the following CAVEAT of the Octeon HW behavior when
+ * re-scheduling DE-SCHEDULEd items whose (next) state is
+ * ORDERED:
+ *   - If there are no switches pending at the time that the
+ *     HW executes the de-schedule, the HW will only re-schedule
+ *     the head of the FIFO associated with the given tag. This
+ *     means that in many respects, the HW treats this ORDERED
+ *     tag as an ATOMIC tag. Note that in the SWTAG_DESCH
+ *     case (to an ORDERED tag), the HW will do the switch
+ *     before the deschedule whenever it is possible to do
+ *     the switch immediately, so it may often look like
+ *     this case.
+ *   - If there is a pending switch to ORDERED at the time
+ *     the HW executes the de-schedule, the HW will perform
+ *     the switch at the time it re-schedules, and will be
+ *     able to reschedule any/all of the entries with the
+ *     same tag.
+ * Due to this behavior, the RECOMMENDATION to software is
+ * that they have a (next) state of ATOMIC when they
+ * DE-SCHEDULE. If an ORDERED tag is what was really desired,
+ * SW can choose to immediately switch to an ORDERED tag
+ * after the work (that has an ATOMIC tag) is re-scheduled.
+ * Note that since there are never any tag switches pending
+ * when the HW re-schedules, this switch can be IMMEDIATE upon
+ * the reception of the pointer during the re-schedule.
+ *
+ * @tag:      New tag value
+ * @tag_type: New tag type
+ * @group:    New group value
+ * @no_sched: Control whether this work queue entry will be rescheduled.
+ *		   - 1 : don't schedule this work
+ *		   - 0 : allow this work to be scheduled.
+ */
+static inline void cvmx_pow_tag_sw_desched(uint32_t tag,
+					   enum cvmx_pow_tag_type tag_type,
+					   uint64_t group, uint64_t no_sched)
+{
+	if (CVMX_ENABLE_POW_CHECKS)
+		__cvmx_pow_warn_if_pending_switch(__func__);
+
+	/* Need to make sure any writes to the work queue entry are complete */
+	CVMX_SYNCWS;
+	/*
+	 * Ensure that there is not a pending tag switch, as a tag
+	 * switch cannot be started if a previous switch is still
+	 * pending.
+	 */
+	cvmx_pow_tag_sw_wait();
+	cvmx_pow_tag_sw_desched_nocheck(tag, tag_type, group, no_sched);
+}
+
+/**
+ * Deschedules the current work queue entry.
+ *
+ * @no_sched: no schedule flag value to be set on the work queue
+ *	      entry.  If this is set the entry will not be
+ *	      rescheduled.
+ */
+static inline void cvmx_pow_desched(uint64_t no_sched)
+{
+	cvmx_addr_t ptr;
+	cvmx_pow_tag_req_t tag_req;
+
+	if (CVMX_ENABLE_POW_CHECKS) {
+		cvmx_pow_tag_req_t current_tag;
+		__cvmx_pow_warn_if_pending_switch(__func__);
+		current_tag = cvmx_pow_get_current_tag();
+		if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL_NULL)
+			pr_warn("%s called with NULL_NULL tag\n", __func__);
+		if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL)
+			pr_warn("%s called with NULL tag. Deschedule not expected from NULL state\n",
+				__func__);
+	}
+
+	/* Need to make sure any writes to the work queue entry are complete */
+	CVMX_SYNCWS;
+
+	tag_req.u64 = 0;
+	tag_req.s.op = CVMX_POW_TAG_OP_DESCH;
+	tag_req.s.no_sched = no_sched;
+
+	ptr.u64 = 0;
+	ptr.sio.mem_region = CVMX_IO_SEG;
+	ptr.sio.is_io = 1;
+	ptr.sio.did = CVMX_OCT_DID_TAG_TAG3;
+	/*
+	 * since TAG3 is used, this store will clear the local pending
+	 * switch bit.
+	 */
+	cvmx_write_io(ptr.u64, tag_req.u64);
+}
+
+/****************************************************
+* Define usage of bits within the 32 bit tag values.
+*****************************************************/
+
+/*
+ * Number of bits of the tag used by software.	The SW bits are always
+ * a contiguous block of the high starting at bit 31.  The hardware
+ * bits are always the low bits.  By default, the top 8 bits of the
+ * tag are reserved for software, and the low 24 are set by the IPD
+ * unit.
+ */
+#define CVMX_TAG_SW_BITS    (8)
+#define CVMX_TAG_SW_SHIFT   (32 - CVMX_TAG_SW_BITS)
+
+/* Below is the list of values for the top 8 bits of the tag. */
+/*
+ * Tag values with top byte of this value are reserved for internal
+ * executive uses.
+ */
+#define CVMX_TAG_SW_BITS_INTERNAL  0x1
+/* The executive divides the remaining 24 bits as follows:
+ *  - the upper 8 bits (bits 23 - 16 of the tag) define a subgroup
+ *
+ *  - the lower 16 bits (bits 15 - 0 of the tag) define are the value
+ *    with the subgroup
+ *
+ * Note that this section describes the format of tags generated by
+ * software - refer to the hardware documentation for a description of
+ * the tags values generated by the packet input hardware.  Subgroups
+ * are defined here.
+ */
+/* Mask for the value portion of the tag */
+#define CVMX_TAG_SUBGROUP_MASK	0xFFFF
+#define CVMX_TAG_SUBGROUP_SHIFT 16
+#define CVMX_TAG_SUBGROUP_PKO  0x1
+
+/* End of executive tag subgroup definitions */
+
+/*
+ * The remaining values software bit values 0x2 - 0xff are available
+ * for application use.
+ */
+
+/**
+ * This function creates a 32 bit tag value from the two values provided.
+ *
+ * @sw_bits: The upper bits (number depends on configuration) are set
+ *	     to this value.  The remainder of bits are set by the
+ *	     hw_bits parameter.
+ *
+ * @hw_bits: The lower bits (number depends on configuration) are set
+ *	     to this value.  The remainder of bits are set by the
+ *	     sw_bits parameter.
+ *
+ * Returns 32 bit value of the combined hw and sw bits.
+ */
+static inline uint32_t cvmx_pow_tag_compose(uint64_t sw_bits, uint64_t hw_bits)
+{
+	return ((sw_bits & cvmx_build_mask(CVMX_TAG_SW_BITS)) <<
+			CVMX_TAG_SW_SHIFT) |
+		(hw_bits & cvmx_build_mask(32 - CVMX_TAG_SW_BITS));
+}
+
+/**
+ * Extracts the bits allocated for software use from the tag
+ *
+ * @tag:    32 bit tag value
+ *
+ * Returns N bit software tag value, where N is configurable with the
+ * CVMX_TAG_SW_BITS define
+ */
+static inline uint32_t cvmx_pow_tag_get_sw_bits(uint64_t tag)
+{
+	return (tag >> (32 - CVMX_TAG_SW_BITS)) &
+		cvmx_build_mask(CVMX_TAG_SW_BITS);
+}
+
+/**
+ *
+ * Extracts the bits allocated for hardware use from the tag
+ *
+ * @tag:    32 bit tag value
+ *
+ * Returns (32 - N) bit software tag value, where N is configurable
+ * with the CVMX_TAG_SW_BITS define
+ */
+static inline uint32_t cvmx_pow_tag_get_hw_bits(uint64_t tag)
+{
+	return tag & cvmx_build_mask(32 - CVMX_TAG_SW_BITS);
+}
+
+/**
+ * Store the current POW internal state into the supplied
+ * buffer. It is recommended that you pass a buffer of at least
+ * 128KB. The format of the capture may change based on SDK
+ * version and Octeon chip.
+ *
+ * @buffer: Buffer to store capture into
+ * @buffer_size:
+ *		 The size of the supplied buffer
+ *
+ * Returns Zero on success, negative on failure
+ */
+extern int cvmx_pow_capture(void *buffer, int buffer_size);
+
+/**
+ * Dump a POW capture to the console in a human readable format.
+ *
+ * @buffer: POW capture from cvmx_pow_capture()
+ * @buffer_size:
+ *		 Size of the buffer
+ */
+extern void cvmx_pow_display(void *buffer, int buffer_size);
+
+/**
+ * Return the number of POW entries supported by this chip
+ *
+ * Returns Number of POW entries
+ */
+extern int cvmx_pow_get_num_entries(void);
+
+#endif /* __CVMX_POW_H__ */