Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

7 files changed, 1236 insertions, 0 deletions

diff --git a/arch/mips/oprofile/Makefile b/arch/mips/oprofile/Makefile
new file mode 100644
index 000000000..e10f216d0
--- /dev/null
+++ b/arch/mips/oprofile/Makefile
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_OPROFILE) += oprofile.o
+
+DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
+		oprof.o cpu_buffer.o buffer_sync.o \
+		event_buffer.o oprofile_files.o \
+		oprofilefs.o oprofile_stats.o \
+		timer_int.o )
+
+oprofile-y				:= $(DRIVER_OBJS) common.o backtrace.o
+
+oprofile-$(CONFIG_CPU_MIPS32)		+= op_model_mipsxx.o
+oprofile-$(CONFIG_CPU_MIPS64)		+= op_model_mipsxx.o
+oprofile-$(CONFIG_CPU_R10000)		+= op_model_mipsxx.o
+oprofile-$(CONFIG_CPU_SB1)		+= op_model_mipsxx.o
+oprofile-$(CONFIG_CPU_XLR)		+= op_model_mipsxx.o
+oprofile-$(CONFIG_CPU_LOONGSON2EF)	+= op_model_loongson2.o
+oprofile-$(CONFIG_CPU_LOONGSON64)	+= op_model_loongson3.o
diff --git a/arch/mips/oprofile/backtrace.c b/arch/mips/oprofile/backtrace.c
new file mode 100644
index 000000000..07d98ba7f
--- /dev/null
+++ b/arch/mips/oprofile/backtrace.c
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/oprofile.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/uaccess.h>
+#include <asm/ptrace.h>
+#include <asm/stacktrace.h>
+#include <linux/stacktrace.h>
+#include <linux/kernel.h>
+#include <asm/sections.h>
+#include <asm/inst.h>
+
+struct stackframe {
+	unsigned long sp;
+	unsigned long pc;
+	unsigned long ra;
+};
+
+static inline int get_mem(unsigned long addr, unsigned long *result)
+{
+	unsigned long *address = (unsigned long *) addr;
+	if (!access_ok(address, sizeof(unsigned long)))
+		return -1;
+	if (__copy_from_user_inatomic(result, address, sizeof(unsigned long)))
+		return -3;
+	return 0;
+}
+
+/*
+ * These two instruction helpers were taken from process.c
+ */
+static inline int is_ra_save_ins(union mips_instruction *ip)
+{
+	/* sw / sd $ra, offset($sp) */
+	return (ip->i_format.opcode == sw_op || ip->i_format.opcode == sd_op)
+		&& ip->i_format.rs == 29 && ip->i_format.rt == 31;
+}
+
+static inline int is_sp_move_ins(union mips_instruction *ip)
+{
+	/* addiu/daddiu sp,sp,-imm */
+	if (ip->i_format.rs != 29 || ip->i_format.rt != 29)
+		return 0;
+	if (ip->i_format.opcode == addiu_op || ip->i_format.opcode == daddiu_op)
+		return 1;
+	return 0;
+}
+
+/*
+ * Looks for specific instructions that mark the end of a function.
+ * This usually means we ran into the code area of the previous function.
+ */
+static inline int is_end_of_function_marker(union mips_instruction *ip)
+{
+	/* jr ra */
+	if (ip->r_format.func == jr_op && ip->r_format.rs == 31)
+		return 1;
+	/* lui gp */
+	if (ip->i_format.opcode == lui_op && ip->i_format.rt == 28)
+		return 1;
+	return 0;
+}
+
+/*
+ * TODO for userspace stack unwinding:
+ * - handle cases where the stack is adjusted inside a function
+ *     (generally doesn't happen)
+ * - find optimal value for max_instr_check
+ * - try to find a better way to handle leaf functions
+ */
+
+static inline int unwind_user_frame(struct stackframe *old_frame,
+				    const unsigned int max_instr_check)
+{
+	struct stackframe new_frame = *old_frame;
+	off_t ra_offset = 0;
+	size_t stack_size = 0;
+	unsigned long addr;
+
+	if (old_frame->pc == 0 || old_frame->sp == 0 || old_frame->ra == 0)
+		return -9;
+
+	for (addr = new_frame.pc; (addr + max_instr_check > new_frame.pc)
+		&& (!ra_offset || !stack_size); --addr) {
+		union mips_instruction ip;
+
+		if (get_mem(addr, (unsigned long *) &ip))
+			return -11;
+
+		if (is_sp_move_ins(&ip)) {
+			int stack_adjustment = ip.i_format.simmediate;
+			if (stack_adjustment > 0)
+				/* This marks the end of the previous function,
+				   which means we overran. */
+				break;
+			stack_size = (unsigned long) stack_adjustment;
+		} else if (is_ra_save_ins(&ip)) {
+			int ra_slot = ip.i_format.simmediate;
+			if (ra_slot < 0)
+				/* This shouldn't happen. */
+				break;
+			ra_offset = ra_slot;
+		} else if (is_end_of_function_marker(&ip))
+			break;
+	}
+
+	if (!ra_offset || !stack_size)
+		goto done;
+
+	if (ra_offset) {
+		new_frame.ra = old_frame->sp + ra_offset;
+		if (get_mem(new_frame.ra, &(new_frame.ra)))
+			return -13;
+	}
+
+	if (stack_size) {
+		new_frame.sp = old_frame->sp + stack_size;
+		if (get_mem(new_frame.sp, &(new_frame.sp)))
+			return -14;
+	}
+
+	if (new_frame.sp > old_frame->sp)
+		return -2;
+
+done:
+	new_frame.pc = old_frame->ra;
+	*old_frame = new_frame;
+
+	return 0;
+}
+
+static inline void do_user_backtrace(unsigned long low_addr,
+				     struct stackframe *frame,
+				     unsigned int depth)
+{
+	const unsigned int max_instr_check = 512;
+	const unsigned long high_addr = low_addr + THREAD_SIZE;
+
+	while (depth-- && !unwind_user_frame(frame, max_instr_check)) {
+		oprofile_add_trace(frame->ra);
+		if (frame->sp < low_addr || frame->sp > high_addr)
+			break;
+	}
+}
+
+#ifndef CONFIG_KALLSYMS
+static inline void do_kernel_backtrace(unsigned long low_addr,
+				       struct stackframe *frame,
+				       unsigned int depth) { }
+#else
+static inline void do_kernel_backtrace(unsigned long low_addr,
+				       struct stackframe *frame,
+				       unsigned int depth)
+{
+	while (depth-- && frame->pc) {
+		frame->pc = unwind_stack_by_address(low_addr,
+						    &(frame->sp),
+						    frame->pc,
+						    &(frame->ra));
+		oprofile_add_trace(frame->ra);
+	}
+}
+#endif
+
+void notrace op_mips_backtrace(struct pt_regs *const regs, unsigned int depth)
+{
+	struct stackframe frame = { .sp = regs->regs[29],
+				    .pc = regs->cp0_epc,
+				    .ra = regs->regs[31] };
+	const int userspace = user_mode(regs);
+	const unsigned long low_addr = ALIGN(frame.sp, THREAD_SIZE);
+
+	if (userspace)
+		do_user_backtrace(low_addr, &frame, depth);
+	else
+		do_kernel_backtrace(low_addr, &frame, depth);
+}
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
new file mode 100644
index 000000000..d3996c4c6
--- /dev/null
+++ b/arch/mips/oprofile/common.c
@@ -0,0 +1,147 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004, 2005 Ralf Baechle
+ * Copyright (C) 2005 MIPS Technologies, Inc.
+ */
+#include <linux/compiler.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/oprofile.h>
+#include <linux/smp.h>
+#include <asm/cpu-info.h>
+#include <asm/cpu-type.h>
+
+#include "op_impl.h"
+
+extern struct op_mips_model op_model_mipsxx_ops __weak;
+extern struct op_mips_model op_model_loongson2_ops __weak;
+extern struct op_mips_model op_model_loongson3_ops __weak;
+
+static struct op_mips_model *model;
+
+static struct op_counter_config ctr[20];
+
+static int op_mips_setup(void)
+{
+	/* Pre-compute the values to stuff in the hardware registers.  */
+	model->reg_setup(ctr);
+
+	/* Configure the registers on all cpus.	 */
+	on_each_cpu(model->cpu_setup, NULL, 1);
+
+	return 0;
+}
+
+static int op_mips_create_files(struct dentry *root)
+{
+	int i;
+
+	for (i = 0; i < model->num_counters; ++i) {
+		struct dentry *dir;
+		char buf[4];
+
+		snprintf(buf, sizeof buf, "%d", i);
+		dir = oprofilefs_mkdir(root, buf);
+
+		oprofilefs_create_ulong(dir, "enabled", &ctr[i].enabled);
+		oprofilefs_create_ulong(dir, "event", &ctr[i].event);
+		oprofilefs_create_ulong(dir, "count", &ctr[i].count);
+		oprofilefs_create_ulong(dir, "kernel", &ctr[i].kernel);
+		oprofilefs_create_ulong(dir, "user", &ctr[i].user);
+		oprofilefs_create_ulong(dir, "exl", &ctr[i].exl);
+		/* Dummy.  */
+		oprofilefs_create_ulong(dir, "unit_mask", &ctr[i].unit_mask);
+	}
+
+	return 0;
+}
+
+static int op_mips_start(void)
+{
+	on_each_cpu(model->cpu_start, NULL, 1);
+
+	return 0;
+}
+
+static void op_mips_stop(void)
+{
+	/* Disable performance monitoring for all counters.  */
+	on_each_cpu(model->cpu_stop, NULL, 1);
+}
+
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+	struct op_mips_model *lmodel = NULL;
+	int res;
+
+	switch (boot_cpu_type()) {
+	case CPU_5KC:
+	case CPU_M14KC:
+	case CPU_M14KEC:
+	case CPU_20KC:
+	case CPU_24K:
+	case CPU_25KF:
+	case CPU_34K:
+	case CPU_1004K:
+	case CPU_74K:
+	case CPU_1074K:
+	case CPU_INTERAPTIV:
+	case CPU_PROAPTIV:
+	case CPU_P5600:
+	case CPU_I6400:
+	case CPU_M5150:
+	case CPU_LOONGSON32:
+	case CPU_SB1:
+	case CPU_SB1A:
+	case CPU_R10000:
+	case CPU_R12000:
+	case CPU_R14000:
+	case CPU_R16000:
+	case CPU_XLR:
+		lmodel = &op_model_mipsxx_ops;
+		break;
+
+	case CPU_LOONGSON2EF:
+		lmodel = &op_model_loongson2_ops;
+		break;
+	case CPU_LOONGSON64:
+		lmodel = &op_model_loongson3_ops;
+		break;
+	}
+
+	/*
+	 * Always set the backtrace. This allows unsupported CPU types to still
+	 * use timer-based oprofile.
+	 */
+	ops->backtrace = op_mips_backtrace;
+
+	if (!lmodel)
+		return -ENODEV;
+
+	res = lmodel->init();
+	if (res)
+		return res;
+
+	model = lmodel;
+
+	ops->create_files	= op_mips_create_files;
+	ops->setup		= op_mips_setup;
+	//ops->shutdown		= op_mips_shutdown;
+	ops->start		= op_mips_start;
+	ops->stop		= op_mips_stop;
+	ops->cpu_type		= lmodel->cpu_type;
+
+	printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
+	       lmodel->cpu_type);
+
+	return 0;
+}
+
+void oprofile_arch_exit(void)
+{
+	if (model)
+		model->exit();
+}
diff --git a/arch/mips/oprofile/op_impl.h b/arch/mips/oprofile/op_impl.h
new file mode 100644
index 000000000..a4e758a39
--- /dev/null
+++ b/arch/mips/oprofile/op_impl.h
@@ -0,0 +1,41 @@
+/**
+ * @file arch/alpha/oprofile/op_impl.h
+ *
+ * @remark Copyright 2002 OProfile authors
+ * @remark Read the file COPYING
+ *
+ * @author Richard Henderson <rth@twiddle.net>
+ */
+
+#ifndef OP_IMPL_H
+#define OP_IMPL_H 1
+
+extern int (*perf_irq)(void);
+
+/* Per-counter configuration as set via oprofilefs.  */
+struct op_counter_config {
+	unsigned long enabled;
+	unsigned long event;
+	unsigned long count;
+	/* Dummies because I am too lazy to hack the userspace tools.  */
+	unsigned long kernel;
+	unsigned long user;
+	unsigned long exl;
+	unsigned long unit_mask;
+};
+
+/* Per-architecture configure and hooks.  */
+struct op_mips_model {
+	void (*reg_setup) (struct op_counter_config *);
+	void (*cpu_setup) (void *dummy);
+	int (*init)(void);
+	void (*exit)(void);
+	void (*cpu_start)(void *args);
+	void (*cpu_stop)(void *args);
+	char *cpu_type;
+	unsigned char num_counters;
+};
+
+void op_mips_backtrace(struct pt_regs * const regs, unsigned int depth);
+
+#endif
diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c
new file mode 100644
index 000000000..b249ec0be
--- /dev/null
+++ b/arch/mips/oprofile/op_model_loongson2.c
@@ -0,0 +1,161 @@
+/*
+ * Loongson2 performance counter driver for oprofile
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Yanhua <yanh@lemote.com>
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/oprofile.h>
+#include <linux/interrupt.h>
+
+#include <loongson.h>			/* LOONGSON2_PERFCNT_IRQ */
+#include "op_impl.h"
+
+#define LOONGSON2_CPU_TYPE	"mips/loongson2"
+
+#define LOONGSON2_PERFCNT_OVERFLOW		(1ULL	<< 31)
+
+#define LOONGSON2_PERFCTRL_EXL			(1UL	<<  0)
+#define LOONGSON2_PERFCTRL_KERNEL		(1UL	<<  1)
+#define LOONGSON2_PERFCTRL_SUPERVISOR		(1UL	<<  2)
+#define LOONGSON2_PERFCTRL_USER			(1UL	<<  3)
+#define LOONGSON2_PERFCTRL_ENABLE		(1UL	<<  4)
+#define LOONGSON2_PERFCTRL_EVENT(idx, event) \
+	(((event) & 0x0f) << ((idx) ? 9 : 5))
+
+#define read_c0_perfctrl() __read_64bit_c0_register($24, 0)
+#define write_c0_perfctrl(val) __write_64bit_c0_register($24, 0, val)
+#define read_c0_perfcnt() __read_64bit_c0_register($25, 0)
+#define write_c0_perfcnt(val) __write_64bit_c0_register($25, 0, val)
+
+static struct loongson2_register_config {
+	unsigned int ctrl;
+	unsigned long long reset_counter1;
+	unsigned long long reset_counter2;
+	int cnt1_enabled, cnt2_enabled;
+} reg;
+
+static char *oprofid = "LoongsonPerf";
+static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id);
+
+static void reset_counters(void *arg)
+{
+	write_c0_perfctrl(0);
+	write_c0_perfcnt(0);
+}
+
+static void loongson2_reg_setup(struct op_counter_config *cfg)
+{
+	unsigned int ctrl = 0;
+
+	reg.reset_counter1 = 0;
+	reg.reset_counter2 = 0;
+
+	/*
+	 * Compute the performance counter ctrl word.
+	 * For now, count kernel and user mode.
+	 */
+	if (cfg[0].enabled) {
+		ctrl |= LOONGSON2_PERFCTRL_EVENT(0, cfg[0].event);
+		reg.reset_counter1 = 0x80000000ULL - cfg[0].count;
+	}
+
+	if (cfg[1].enabled) {
+		ctrl |= LOONGSON2_PERFCTRL_EVENT(1, cfg[1].event);
+		reg.reset_counter2 = 0x80000000ULL - cfg[1].count;
+	}
+
+	if (cfg[0].enabled || cfg[1].enabled) {
+		ctrl |= LOONGSON2_PERFCTRL_EXL | LOONGSON2_PERFCTRL_ENABLE;
+		if (cfg[0].kernel || cfg[1].kernel)
+			ctrl |= LOONGSON2_PERFCTRL_KERNEL;
+		if (cfg[0].user || cfg[1].user)
+			ctrl |= LOONGSON2_PERFCTRL_USER;
+	}
+
+	reg.ctrl = ctrl;
+
+	reg.cnt1_enabled = cfg[0].enabled;
+	reg.cnt2_enabled = cfg[1].enabled;
+}
+
+static void loongson2_cpu_setup(void *args)
+{
+	write_c0_perfcnt((reg.reset_counter2 << 32) | reg.reset_counter1);
+}
+
+static void loongson2_cpu_start(void *args)
+{
+	/* Start all counters on current CPU */
+	if (reg.cnt1_enabled || reg.cnt2_enabled)
+		write_c0_perfctrl(reg.ctrl);
+}
+
+static void loongson2_cpu_stop(void *args)
+{
+	/* Stop all counters on current CPU */
+	write_c0_perfctrl(0);
+	memset(&reg, 0, sizeof(reg));
+}
+
+static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id)
+{
+	uint64_t counter, counter1, counter2;
+	struct pt_regs *regs = get_irq_regs();
+	int enabled;
+
+	/* Check whether the irq belongs to me */
+	enabled = read_c0_perfctrl() & LOONGSON2_PERFCTRL_ENABLE;
+	if (!enabled)
+		return IRQ_NONE;
+	enabled = reg.cnt1_enabled | reg.cnt2_enabled;
+	if (!enabled)
+		return IRQ_NONE;
+
+	counter = read_c0_perfcnt();
+	counter1 = counter & 0xffffffff;
+	counter2 = counter >> 32;
+
+	if (counter1 & LOONGSON2_PERFCNT_OVERFLOW) {
+		if (reg.cnt1_enabled)
+			oprofile_add_sample(regs, 0);
+		counter1 = reg.reset_counter1;
+	}
+	if (counter2 & LOONGSON2_PERFCNT_OVERFLOW) {
+		if (reg.cnt2_enabled)
+			oprofile_add_sample(regs, 1);
+		counter2 = reg.reset_counter2;
+	}
+
+	write_c0_perfcnt((counter2 << 32) | counter1);
+
+	return IRQ_HANDLED;
+}
+
+static int __init loongson2_init(void)
+{
+	return request_irq(LOONGSON2_PERFCNT_IRQ, loongson2_perfcount_handler,
+			   IRQF_SHARED, "Perfcounter", oprofid);
+}
+
+static void loongson2_exit(void)
+{
+	reset_counters(NULL);
+	free_irq(LOONGSON2_PERFCNT_IRQ, oprofid);
+}
+
+struct op_mips_model op_model_loongson2_ops = {
+	.reg_setup = loongson2_reg_setup,
+	.cpu_setup = loongson2_cpu_setup,
+	.init = loongson2_init,
+	.exit = loongson2_exit,
+	.cpu_start = loongson2_cpu_start,
+	.cpu_stop = loongson2_cpu_stop,
+	.cpu_type = LOONGSON2_CPU_TYPE,
+	.num_counters = 2
+};
diff --git a/arch/mips/oprofile/op_model_loongson3.c b/arch/mips/oprofile/op_model_loongson3.c
new file mode 100644
index 000000000..436b1fc99
--- /dev/null
+++ b/arch/mips/oprofile/op_model_loongson3.c
@@ -0,0 +1,213 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/smp.h>
+#include <linux/proc_fs.h>
+#include <linux/oprofile.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/uaccess.h>
+#include <irq.h>
+#include <loongson.h>
+#include "op_impl.h"
+
+#define LOONGSON3_PERFCNT_OVERFLOW	(1ULL << 63)
+
+#define LOONGSON3_PERFCTRL_EXL		(1UL << 0)
+#define LOONGSON3_PERFCTRL_KERNEL	(1UL << 1)
+#define LOONGSON3_PERFCTRL_SUPERVISOR	(1UL << 2)
+#define LOONGSON3_PERFCTRL_USER		(1UL << 3)
+#define LOONGSON3_PERFCTRL_ENABLE	(1UL << 4)
+#define LOONGSON3_PERFCTRL_W		(1UL << 30)
+#define LOONGSON3_PERFCTRL_M		(1UL << 31)
+#define LOONGSON3_PERFCTRL_EVENT(idx, event) \
+	(((event) & (idx ? 0x0f : 0x3f)) << 5)
+
+/* Loongson-3 PerfCount performance counter1 register */
+#define read_c0_perflo1() __read_64bit_c0_register($25, 0)
+#define write_c0_perflo1(val) __write_64bit_c0_register($25, 0, val)
+#define read_c0_perfhi1() __read_64bit_c0_register($25, 1)
+#define write_c0_perfhi1(val) __write_64bit_c0_register($25, 1, val)
+
+/* Loongson-3 PerfCount performance counter2 register */
+#define read_c0_perflo2() __read_64bit_c0_register($25, 2)
+#define write_c0_perflo2(val) __write_64bit_c0_register($25, 2, val)
+#define read_c0_perfhi2() __read_64bit_c0_register($25, 3)
+#define write_c0_perfhi2(val) __write_64bit_c0_register($25, 3, val)
+
+static int (*save_perf_irq)(void);
+
+static struct loongson3_register_config {
+	unsigned int control1;
+	unsigned int control2;
+	unsigned long long reset_counter1;
+	unsigned long long reset_counter2;
+	int ctr1_enable, ctr2_enable;
+} reg;
+
+static void reset_counters(void *arg)
+{
+	write_c0_perfhi1(0);
+	write_c0_perfhi2(0);
+	write_c0_perflo1(0xc0000000);
+	write_c0_perflo2(0x40000000);
+}
+
+/* Compute all of the registers in preparation for enabling profiling. */
+static void loongson3_reg_setup(struct op_counter_config *ctr)
+{
+	unsigned int control1 = 0;
+	unsigned int control2 = 0;
+
+	reg.reset_counter1 = 0;
+	reg.reset_counter2 = 0;
+	/* Compute the performance counter control word. */
+	/* For now count kernel and user mode */
+	if (ctr[0].enabled) {
+		control1 |= LOONGSON3_PERFCTRL_EVENT(0, ctr[0].event) |
+					LOONGSON3_PERFCTRL_ENABLE;
+		if (ctr[0].kernel)
+			control1 |= LOONGSON3_PERFCTRL_KERNEL;
+		if (ctr[0].user)
+			control1 |= LOONGSON3_PERFCTRL_USER;
+		reg.reset_counter1 = 0x8000000000000000ULL - ctr[0].count;
+	}
+
+	if (ctr[1].enabled) {
+		control2 |= LOONGSON3_PERFCTRL_EVENT(1, ctr[1].event) |
+					LOONGSON3_PERFCTRL_ENABLE;
+		if (ctr[1].kernel)
+			control2 |= LOONGSON3_PERFCTRL_KERNEL;
+		if (ctr[1].user)
+			control2 |= LOONGSON3_PERFCTRL_USER;
+		reg.reset_counter2 = 0x8000000000000000ULL - ctr[1].count;
+	}
+
+	if (ctr[0].enabled)
+		control1 |= LOONGSON3_PERFCTRL_EXL;
+	if (ctr[1].enabled)
+		control2 |= LOONGSON3_PERFCTRL_EXL;
+
+	reg.control1 = control1;
+	reg.control2 = control2;
+	reg.ctr1_enable = ctr[0].enabled;
+	reg.ctr2_enable = ctr[1].enabled;
+}
+
+/* Program all of the registers in preparation for enabling profiling. */
+static void loongson3_cpu_setup(void *args)
+{
+	uint64_t perfcount1, perfcount2;
+
+	perfcount1 = reg.reset_counter1;
+	perfcount2 = reg.reset_counter2;
+	write_c0_perfhi1(perfcount1);
+	write_c0_perfhi2(perfcount2);
+}
+
+static void loongson3_cpu_start(void *args)
+{
+	/* Start all counters on current CPU */
+	reg.control1 |= (LOONGSON3_PERFCTRL_W|LOONGSON3_PERFCTRL_M);
+	reg.control2 |= (LOONGSON3_PERFCTRL_W|LOONGSON3_PERFCTRL_M);
+
+	if (reg.ctr1_enable)
+		write_c0_perflo1(reg.control1);
+	if (reg.ctr2_enable)
+		write_c0_perflo2(reg.control2);
+}
+
+static void loongson3_cpu_stop(void *args)
+{
+	/* Stop all counters on current CPU */
+	write_c0_perflo1(0xc0000000);
+	write_c0_perflo2(0x40000000);
+	memset(&reg, 0, sizeof(reg));
+}
+
+static int loongson3_perfcount_handler(void)
+{
+	unsigned long flags;
+	uint64_t counter1, counter2;
+	uint32_t cause, handled = IRQ_NONE;
+	struct pt_regs *regs = get_irq_regs();
+
+	cause = read_c0_cause();
+	if (!(cause & CAUSEF_PCI))
+		return handled;
+
+	counter1 = read_c0_perfhi1();
+	counter2 = read_c0_perfhi2();
+
+	local_irq_save(flags);
+
+	if (counter1 & LOONGSON3_PERFCNT_OVERFLOW) {
+		if (reg.ctr1_enable)
+			oprofile_add_sample(regs, 0);
+		counter1 = reg.reset_counter1;
+	}
+	if (counter2 & LOONGSON3_PERFCNT_OVERFLOW) {
+		if (reg.ctr2_enable)
+			oprofile_add_sample(regs, 1);
+		counter2 = reg.reset_counter2;
+	}
+
+	local_irq_restore(flags);
+
+	write_c0_perfhi1(counter1);
+	write_c0_perfhi2(counter2);
+
+	if (!(cause & CAUSEF_TI))
+		handled = IRQ_HANDLED;
+
+	return handled;
+}
+
+static int loongson3_starting_cpu(unsigned int cpu)
+{
+	write_c0_perflo1(reg.control1);
+	write_c0_perflo2(reg.control2);
+	return 0;
+}
+
+static int loongson3_dying_cpu(unsigned int cpu)
+{
+	write_c0_perflo1(0xc0000000);
+	write_c0_perflo2(0x40000000);
+	return 0;
+}
+
+static int __init loongson3_init(void)
+{
+	on_each_cpu(reset_counters, NULL, 1);
+	cpuhp_setup_state_nocalls(CPUHP_AP_MIPS_OP_LOONGSON3_STARTING,
+				  "mips/oprofile/loongson3:starting",
+				  loongson3_starting_cpu, loongson3_dying_cpu);
+	save_perf_irq = perf_irq;
+	perf_irq = loongson3_perfcount_handler;
+
+	return 0;
+}
+
+static void loongson3_exit(void)
+{
+	on_each_cpu(reset_counters, NULL, 1);
+	cpuhp_remove_state_nocalls(CPUHP_AP_MIPS_OP_LOONGSON3_STARTING);
+	perf_irq = save_perf_irq;
+}
+
+struct op_mips_model op_model_loongson3_ops = {
+	.reg_setup	= loongson3_reg_setup,
+	.cpu_setup	= loongson3_cpu_setup,
+	.init		= loongson3_init,
+	.exit		= loongson3_exit,
+	.cpu_start	= loongson3_cpu_start,
+	.cpu_stop	= loongson3_cpu_stop,
+	.cpu_type	= "mips/loongson3",
+	.num_counters	= 2
+};
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
new file mode 100644
index 000000000..55d7b7fd1
--- /dev/null
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -0,0 +1,479 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004, 05, 06 by Ralf Baechle
+ * Copyright (C) 2005 by MIPS Technologies, Inc.
+ */
+#include <linux/cpumask.h>
+#include <linux/oprofile.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+#include <asm/irq_regs.h>
+#include <asm/time.h>
+
+#include "op_impl.h"
+
+#define M_PERFCTL_EVENT(event)		(((event) << MIPS_PERFCTRL_EVENT_S) & \
+					 MIPS_PERFCTRL_EVENT)
+#define M_PERFCTL_VPEID(vpe)		((vpe)	  << MIPS_PERFCTRL_VPEID_S)
+
+#define M_COUNTER_OVERFLOW		(1UL	  << 31)
+
+static int (*save_perf_irq)(void);
+static int perfcount_irq;
+
+/*
+ * XLR has only one set of counters per core. Designate the
+ * first hardware thread in the core for setup and init.
+ * Skip CPUs with non-zero hardware thread id (4 hwt per core)
+ */
+#if defined(CONFIG_CPU_XLR) && defined(CONFIG_SMP)
+#define oprofile_skip_cpu(c)	((cpu_logical_map(c) & 0x3) != 0)
+#else
+#define oprofile_skip_cpu(c)	0
+#endif
+
+#ifdef CONFIG_MIPS_MT_SMP
+#define WHAT		(MIPS_PERFCTRL_MT_EN_VPE | \
+			 M_PERFCTL_VPEID(cpu_vpe_id(&current_cpu_data)))
+#define vpe_id()	(cpu_has_mipsmt_pertccounters ? \
+			0 : cpu_vpe_id(&current_cpu_data))
+
+/*
+ * The number of bits to shift to convert between counters per core and
+ * counters per VPE.  There is no reasonable interface atm to obtain the
+ * number of VPEs used by Linux and in the 34K this number is fixed to two
+ * anyways so we hardcore a few things here for the moment.  The way it's
+ * done here will ensure that oprofile VSMP kernel will run right on a lesser
+ * core like a 24K also or with maxcpus=1.
+ */
+static inline unsigned int vpe_shift(void)
+{
+	if (num_possible_cpus() > 1)
+		return 1;
+
+	return 0;
+}
+
+#else
+
+#define WHAT		0
+#define vpe_id()	0
+
+static inline unsigned int vpe_shift(void)
+{
+	return 0;
+}
+
+#endif
+
+static inline unsigned int counters_total_to_per_cpu(unsigned int counters)
+{
+	return counters >> vpe_shift();
+}
+
+static inline unsigned int counters_per_cpu_to_total(unsigned int counters)
+{
+	return counters << vpe_shift();
+}
+
+#define __define_perf_accessors(r, n, np)				\
+									\
+static inline unsigned int r_c0_ ## r ## n(void)			\
+{									\
+	unsigned int cpu = vpe_id();					\
+									\
+	switch (cpu) {							\
+	case 0:								\
+		return read_c0_ ## r ## n();				\
+	case 1:								\
+		return read_c0_ ## r ## np();				\
+	default:							\
+		BUG();							\
+	}								\
+	return 0;							\
+}									\
+									\
+static inline void w_c0_ ## r ## n(unsigned int value)			\
+{									\
+	unsigned int cpu = vpe_id();					\
+									\
+	switch (cpu) {							\
+	case 0:								\
+		write_c0_ ## r ## n(value);				\
+		return;							\
+	case 1:								\
+		write_c0_ ## r ## np(value);				\
+		return;							\
+	default:							\
+		BUG();							\
+	}								\
+	return;								\
+}									\
+
+__define_perf_accessors(perfcntr, 0, 2)
+__define_perf_accessors(perfcntr, 1, 3)
+__define_perf_accessors(perfcntr, 2, 0)
+__define_perf_accessors(perfcntr, 3, 1)
+
+__define_perf_accessors(perfctrl, 0, 2)
+__define_perf_accessors(perfctrl, 1, 3)
+__define_perf_accessors(perfctrl, 2, 0)
+__define_perf_accessors(perfctrl, 3, 1)
+
+struct op_mips_model op_model_mipsxx_ops;
+
+static struct mipsxx_register_config {
+	unsigned int control[4];
+	unsigned int counter[4];
+} reg;
+
+/* Compute all of the registers in preparation for enabling profiling.	*/
+
+static void mipsxx_reg_setup(struct op_counter_config *ctr)
+{
+	unsigned int counters = op_model_mipsxx_ops.num_counters;
+	int i;
+
+	/* Compute the performance counter control word.  */
+	for (i = 0; i < counters; i++) {
+		reg.control[i] = 0;
+		reg.counter[i] = 0;
+
+		if (!ctr[i].enabled)
+			continue;
+
+		reg.control[i] = M_PERFCTL_EVENT(ctr[i].event) |
+				 MIPS_PERFCTRL_IE;
+		if (ctr[i].kernel)
+			reg.control[i] |= MIPS_PERFCTRL_K;
+		if (ctr[i].user)
+			reg.control[i] |= MIPS_PERFCTRL_U;
+		if (ctr[i].exl)
+			reg.control[i] |= MIPS_PERFCTRL_EXL;
+		if (boot_cpu_type() == CPU_XLR)
+			reg.control[i] |= XLR_PERFCTRL_ALLTHREADS;
+		reg.counter[i] = 0x80000000 - ctr[i].count;
+	}
+}
+
+/* Program all of the registers in preparation for enabling profiling.	*/
+
+static void mipsxx_cpu_setup(void *args)
+{
+	unsigned int counters = op_model_mipsxx_ops.num_counters;
+
+	if (oprofile_skip_cpu(smp_processor_id()))
+		return;
+
+	switch (counters) {
+	case 4:
+		w_c0_perfctrl3(0);
+		w_c0_perfcntr3(reg.counter[3]);
+		fallthrough;
+	case 3:
+		w_c0_perfctrl2(0);
+		w_c0_perfcntr2(reg.counter[2]);
+		fallthrough;
+	case 2:
+		w_c0_perfctrl1(0);
+		w_c0_perfcntr1(reg.counter[1]);
+		fallthrough;
+	case 1:
+		w_c0_perfctrl0(0);
+		w_c0_perfcntr0(reg.counter[0]);
+	}
+}
+
+/* Start all counters on current CPU */
+static void mipsxx_cpu_start(void *args)
+{
+	unsigned int counters = op_model_mipsxx_ops.num_counters;
+
+	if (oprofile_skip_cpu(smp_processor_id()))
+		return;
+
+	switch (counters) {
+	case 4:
+		w_c0_perfctrl3(WHAT | reg.control[3]);
+		fallthrough;
+	case 3:
+		w_c0_perfctrl2(WHAT | reg.control[2]);
+		fallthrough;
+	case 2:
+		w_c0_perfctrl1(WHAT | reg.control[1]);
+		fallthrough;
+	case 1:
+		w_c0_perfctrl0(WHAT | reg.control[0]);
+	}
+}
+
+/* Stop all counters on current CPU */
+static void mipsxx_cpu_stop(void *args)
+{
+	unsigned int counters = op_model_mipsxx_ops.num_counters;
+
+	if (oprofile_skip_cpu(smp_processor_id()))
+		return;
+
+	switch (counters) {
+	case 4:
+		w_c0_perfctrl3(0);
+		fallthrough;
+	case 3:
+		w_c0_perfctrl2(0);
+		fallthrough;
+	case 2:
+		w_c0_perfctrl1(0);
+		fallthrough;
+	case 1:
+		w_c0_perfctrl0(0);
+	}
+}
+
+static int mipsxx_perfcount_handler(void)
+{
+	unsigned int counters = op_model_mipsxx_ops.num_counters;
+	unsigned int control;
+	unsigned int counter;
+	int handled = IRQ_NONE;
+
+	if (cpu_has_mips_r2 && !(read_c0_cause() & CAUSEF_PCI))
+		return handled;
+
+	switch (counters) {
+#define HANDLE_COUNTER(n)						\
+	case n + 1:							\
+		control = r_c0_perfctrl ## n();				\
+		counter = r_c0_perfcntr ## n();				\
+		if ((control & MIPS_PERFCTRL_IE) &&			\
+		    (counter & M_COUNTER_OVERFLOW)) {			\
+			oprofile_add_sample(get_irq_regs(), n);		\
+			w_c0_perfcntr ## n(reg.counter[n]);		\
+			handled = IRQ_HANDLED;				\
+		}
+	HANDLE_COUNTER(3)
+	fallthrough;
+	HANDLE_COUNTER(2)
+	fallthrough;
+	HANDLE_COUNTER(1)
+	fallthrough;
+	HANDLE_COUNTER(0)
+	}
+
+	return handled;
+}
+
+static inline int __n_counters(void)
+{
+	if (!cpu_has_perf)
+		return 0;
+	if (!(read_c0_perfctrl0() & MIPS_PERFCTRL_M))
+		return 1;
+	if (!(read_c0_perfctrl1() & MIPS_PERFCTRL_M))
+		return 2;
+	if (!(read_c0_perfctrl2() & MIPS_PERFCTRL_M))
+		return 3;
+
+	return 4;
+}
+
+static inline int n_counters(void)
+{
+	int counters;
+
+	switch (current_cpu_type()) {
+	case CPU_R10000:
+		counters = 2;
+		break;
+
+	case CPU_R12000:
+	case CPU_R14000:
+	case CPU_R16000:
+		counters = 4;
+		break;
+
+	default:
+		counters = __n_counters();
+	}
+
+	return counters;
+}
+
+static void reset_counters(void *arg)
+{
+	int counters = (int)(long)arg;
+	switch (counters) {
+	case 4:
+		w_c0_perfctrl3(0);
+		w_c0_perfcntr3(0);
+		fallthrough;
+	case 3:
+		w_c0_perfctrl2(0);
+		w_c0_perfcntr2(0);
+		fallthrough;
+	case 2:
+		w_c0_perfctrl1(0);
+		w_c0_perfcntr1(0);
+		fallthrough;
+	case 1:
+		w_c0_perfctrl0(0);
+		w_c0_perfcntr0(0);
+	}
+}
+
+static irqreturn_t mipsxx_perfcount_int(int irq, void *dev_id)
+{
+	return mipsxx_perfcount_handler();
+}
+
+static int __init mipsxx_init(void)
+{
+	int counters;
+
+	counters = n_counters();
+	if (counters == 0) {
+		printk(KERN_ERR "Oprofile: CPU has no performance counters\n");
+		return -ENODEV;
+	}
+
+#ifdef CONFIG_MIPS_MT_SMP
+	if (!cpu_has_mipsmt_pertccounters)
+		counters = counters_total_to_per_cpu(counters);
+#endif
+	on_each_cpu(reset_counters, (void *)(long)counters, 1);
+
+	op_model_mipsxx_ops.num_counters = counters;
+	switch (current_cpu_type()) {
+	case CPU_M14KC:
+		op_model_mipsxx_ops.cpu_type = "mips/M14Kc";
+		break;
+
+	case CPU_M14KEC:
+		op_model_mipsxx_ops.cpu_type = "mips/M14KEc";
+		break;
+
+	case CPU_20KC:
+		op_model_mipsxx_ops.cpu_type = "mips/20K";
+		break;
+
+	case CPU_24K:
+		op_model_mipsxx_ops.cpu_type = "mips/24K";
+		break;
+
+	case CPU_25KF:
+		op_model_mipsxx_ops.cpu_type = "mips/25K";
+		break;
+
+	case CPU_1004K:
+	case CPU_34K:
+		op_model_mipsxx_ops.cpu_type = "mips/34K";
+		break;
+
+	case CPU_1074K:
+	case CPU_74K:
+		op_model_mipsxx_ops.cpu_type = "mips/74K";
+		break;
+
+	case CPU_INTERAPTIV:
+		op_model_mipsxx_ops.cpu_type = "mips/interAptiv";
+		break;
+
+	case CPU_PROAPTIV:
+		op_model_mipsxx_ops.cpu_type = "mips/proAptiv";
+		break;
+
+	case CPU_P5600:
+		op_model_mipsxx_ops.cpu_type = "mips/P5600";
+		break;
+
+	case CPU_I6400:
+		op_model_mipsxx_ops.cpu_type = "mips/I6400";
+		break;
+
+	case CPU_M5150:
+		op_model_mipsxx_ops.cpu_type = "mips/M5150";
+		break;
+
+	case CPU_5KC:
+		op_model_mipsxx_ops.cpu_type = "mips/5K";
+		break;
+
+	case CPU_R10000:
+		if ((current_cpu_data.processor_id & 0xff) == 0x20)
+			op_model_mipsxx_ops.cpu_type = "mips/r10000-v2.x";
+		else
+			op_model_mipsxx_ops.cpu_type = "mips/r10000";
+		break;
+
+	case CPU_R12000:
+	case CPU_R14000:
+		op_model_mipsxx_ops.cpu_type = "mips/r12000";
+		break;
+
+	case CPU_R16000:
+		op_model_mipsxx_ops.cpu_type = "mips/r16000";
+		break;
+
+	case CPU_SB1:
+	case CPU_SB1A:
+		op_model_mipsxx_ops.cpu_type = "mips/sb1";
+		break;
+
+	case CPU_LOONGSON32:
+		op_model_mipsxx_ops.cpu_type = "mips/loongson1";
+		break;
+
+	case CPU_XLR:
+		op_model_mipsxx_ops.cpu_type = "mips/xlr";
+		break;
+
+	default:
+		printk(KERN_ERR "Profiling unsupported for this CPU\n");
+
+		return -ENODEV;
+	}
+
+	save_perf_irq = perf_irq;
+	perf_irq = mipsxx_perfcount_handler;
+
+	if (get_c0_perfcount_int)
+		perfcount_irq = get_c0_perfcount_int();
+	else if (cp0_perfcount_irq >= 0)
+		perfcount_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
+	else
+		perfcount_irq = -1;
+
+	if (perfcount_irq >= 0)
+		return request_irq(perfcount_irq, mipsxx_perfcount_int,
+				   IRQF_PERCPU | IRQF_NOBALANCING |
+				   IRQF_NO_THREAD | IRQF_NO_SUSPEND |
+				   IRQF_SHARED,
+				   "Perfcounter", save_perf_irq);
+
+	return 0;
+}
+
+static void mipsxx_exit(void)
+{
+	int counters = op_model_mipsxx_ops.num_counters;
+
+	if (perfcount_irq >= 0)
+		free_irq(perfcount_irq, save_perf_irq);
+
+	counters = counters_per_cpu_to_total(counters);
+	on_each_cpu(reset_counters, (void *)(long)counters, 1);
+
+	perf_irq = save_perf_irq;
+}
+
+struct op_mips_model op_model_mipsxx_ops = {
+	.reg_setup	= mipsxx_reg_setup,
+	.cpu_setup	= mipsxx_cpu_setup,
+	.init		= mipsxx_init,
+	.exit		= mipsxx_exit,
+	.cpu_start	= mipsxx_cpu_start,
+	.cpu_stop	= mipsxx_cpu_stop,
+};