Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 474 insertions, 0 deletions

diff --git a/drivers/clocksource/hyperv_timer.c b/drivers/clocksource/hyperv_timer.c
new file mode 100644
index 000000000..7c617d8df
--- /dev/null
+++ b/drivers/clocksource/hyperv_timer.c
@@ -0,0 +1,474 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Clocksource driver for the synthetic counter and timers
+ * provided by the Hyper-V hypervisor to guest VMs, as described
+ * in the Hyper-V Top Level Functional Spec (TLFS). This driver
+ * is instruction set architecture independent.
+ *
+ * Copyright (C) 2019, Microsoft, Inc.
+ *
+ * Author:  Michael Kelley <mikelley@microsoft.com>
+ */
+
+#include <linux/percpu.h>
+#include <linux/cpumask.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/sched_clock.h>
+#include <linux/mm.h>
+#include <linux/cpuhotplug.h>
+#include <clocksource/hyperv_timer.h>
+#include <asm/hyperv-tlfs.h>
+#include <asm/mshyperv.h>
+
+static struct clock_event_device __percpu *hv_clock_event;
+static u64 hv_sched_clock_offset __ro_after_init;
+
+/*
+ * If false, we're using the old mechanism for stimer0 interrupts
+ * where it sends a VMbus message when it expires. The old
+ * mechanism is used when running on older versions of Hyper-V
+ * that don't support Direct Mode. While Hyper-V provides
+ * four stimer's per CPU, Linux uses only stimer0.
+ *
+ * Because Direct Mode does not require processing a VMbus
+ * message, stimer interrupts can be enabled earlier in the
+ * process of booting a CPU, and consistent with when timer
+ * interrupts are enabled for other clocksource drivers.
+ * However, for legacy versions of Hyper-V when Direct Mode
+ * is not enabled, setting up stimer interrupts must be
+ * delayed until VMbus is initialized and can process the
+ * interrupt message.
+ */
+static bool direct_mode_enabled;
+
+static int stimer0_irq;
+static int stimer0_vector;
+static int stimer0_message_sint;
+
+/*
+ * ISR for when stimer0 is operating in Direct Mode.  Direct Mode
+ * does not use VMbus or any VMbus messages, so process here and not
+ * in the VMbus driver code.
+ */
+void hv_stimer0_isr(void)
+{
+	struct clock_event_device *ce;
+
+	ce = this_cpu_ptr(hv_clock_event);
+	ce->event_handler(ce);
+}
+EXPORT_SYMBOL_GPL(hv_stimer0_isr);
+
+static int hv_ce_set_next_event(unsigned long delta,
+				struct clock_event_device *evt)
+{
+	u64 current_tick;
+
+	current_tick = hv_read_reference_counter();
+	current_tick += delta;
+	hv_init_timer(0, current_tick);
+	return 0;
+}
+
+static int hv_ce_shutdown(struct clock_event_device *evt)
+{
+	hv_init_timer(0, 0);
+	hv_init_timer_config(0, 0);
+	if (direct_mode_enabled)
+		hv_disable_stimer0_percpu_irq(stimer0_irq);
+
+	return 0;
+}
+
+static int hv_ce_set_oneshot(struct clock_event_device *evt)
+{
+	union hv_stimer_config timer_cfg;
+
+	timer_cfg.as_uint64 = 0;
+	timer_cfg.enable = 1;
+	timer_cfg.auto_enable = 1;
+	if (direct_mode_enabled) {
+		/*
+		 * When it expires, the timer will directly interrupt
+		 * on the specified hardware vector/IRQ.
+		 */
+		timer_cfg.direct_mode = 1;
+		timer_cfg.apic_vector = stimer0_vector;
+		hv_enable_stimer0_percpu_irq(stimer0_irq);
+	} else {
+		/*
+		 * When it expires, the timer will generate a VMbus message,
+		 * to be handled by the normal VMbus interrupt handler.
+		 */
+		timer_cfg.direct_mode = 0;
+		timer_cfg.sintx = stimer0_message_sint;
+	}
+	hv_init_timer_config(0, timer_cfg.as_uint64);
+	return 0;
+}
+
+/*
+ * hv_stimer_init - Per-cpu initialization of the clockevent
+ */
+static int hv_stimer_init(unsigned int cpu)
+{
+	struct clock_event_device *ce;
+
+	if (!hv_clock_event)
+		return 0;
+
+	ce = per_cpu_ptr(hv_clock_event, cpu);
+	ce->name = "Hyper-V clockevent";
+	ce->features = CLOCK_EVT_FEAT_ONESHOT;
+	ce->cpumask = cpumask_of(cpu);
+	ce->rating = 1000;
+	ce->set_state_shutdown = hv_ce_shutdown;
+	ce->set_state_oneshot = hv_ce_set_oneshot;
+	ce->set_next_event = hv_ce_set_next_event;
+
+	clockevents_config_and_register(ce,
+					HV_CLOCK_HZ,
+					HV_MIN_DELTA_TICKS,
+					HV_MAX_MAX_DELTA_TICKS);
+	return 0;
+}
+
+/*
+ * hv_stimer_cleanup - Per-cpu cleanup of the clockevent
+ */
+int hv_stimer_cleanup(unsigned int cpu)
+{
+	struct clock_event_device *ce;
+
+	if (!hv_clock_event)
+		return 0;
+
+	/*
+	 * In the legacy case where Direct Mode is not enabled
+	 * (which can only be on x86/64), stimer cleanup happens
+	 * relatively early in the CPU offlining process. We
+	 * must unbind the stimer-based clockevent device so
+	 * that the LAPIC timer can take over until clockevents
+	 * are no longer needed in the offlining process. Note
+	 * that clockevents_unbind_device() eventually calls
+	 * hv_ce_shutdown().
+	 *
+	 * The unbind should not be done when Direct Mode is
+	 * enabled because we may be on an architecture where
+	 * there are no other clockevent devices to fallback to.
+	 */
+	ce = per_cpu_ptr(hv_clock_event, cpu);
+	if (direct_mode_enabled)
+		hv_ce_shutdown(ce);
+	else
+		clockevents_unbind_device(ce, cpu);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(hv_stimer_cleanup);
+
+/* hv_stimer_alloc - Global initialization of the clockevent and stimer0 */
+int hv_stimer_alloc(void)
+{
+	int ret = 0;
+
+	/*
+	 * Synthetic timers are always available except on old versions of
+	 * Hyper-V on x86.  In that case, return as error as Linux will use a
+	 * clockevent based on emulated LAPIC timer hardware.
+	 */
+	if (!(ms_hyperv.features & HV_MSR_SYNTIMER_AVAILABLE))
+		return -EINVAL;
+
+	hv_clock_event = alloc_percpu(struct clock_event_device);
+	if (!hv_clock_event)
+		return -ENOMEM;
+
+	direct_mode_enabled = ms_hyperv.misc_features &
+			HV_STIMER_DIRECT_MODE_AVAILABLE;
+	if (direct_mode_enabled) {
+		ret = hv_setup_stimer0_irq(&stimer0_irq, &stimer0_vector,
+				hv_stimer0_isr);
+		if (ret)
+			goto free_percpu;
+
+		/*
+		 * Since we are in Direct Mode, stimer initialization
+		 * can be done now with a CPUHP value in the same range
+		 * as other clockevent devices.
+		 */
+		ret = cpuhp_setup_state(CPUHP_AP_HYPERV_TIMER_STARTING,
+				"clockevents/hyperv/stimer:starting",
+				hv_stimer_init, hv_stimer_cleanup);
+		if (ret < 0)
+			goto free_stimer0_irq;
+	}
+	return ret;
+
+free_stimer0_irq:
+	hv_remove_stimer0_irq(stimer0_irq);
+	stimer0_irq = 0;
+free_percpu:
+	free_percpu(hv_clock_event);
+	hv_clock_event = NULL;
+	return ret;
+}
+EXPORT_SYMBOL_GPL(hv_stimer_alloc);
+
+/*
+ * hv_stimer_legacy_init -- Called from the VMbus driver to handle
+ * the case when Direct Mode is not enabled, and the stimer
+ * must be initialized late in the CPU onlining process.
+ *
+ */
+void hv_stimer_legacy_init(unsigned int cpu, int sint)
+{
+	if (direct_mode_enabled)
+		return;
+
+	/*
+	 * This function gets called by each vCPU, so setting the
+	 * global stimer_message_sint value each time is conceptually
+	 * not ideal, but the value passed in is always the same and
+	 * it avoids introducing yet another interface into this
+	 * clocksource driver just to set the sint in the legacy case.
+	 */
+	stimer0_message_sint = sint;
+	(void)hv_stimer_init(cpu);
+}
+EXPORT_SYMBOL_GPL(hv_stimer_legacy_init);
+
+/*
+ * hv_stimer_legacy_cleanup -- Called from the VMbus driver to
+ * handle the case when Direct Mode is not enabled, and the
+ * stimer must be cleaned up early in the CPU offlining
+ * process.
+ */
+void hv_stimer_legacy_cleanup(unsigned int cpu)
+{
+	if (direct_mode_enabled)
+		return;
+	(void)hv_stimer_cleanup(cpu);
+}
+EXPORT_SYMBOL_GPL(hv_stimer_legacy_cleanup);
+
+
+/* hv_stimer_free - Free global resources allocated by hv_stimer_alloc() */
+void hv_stimer_free(void)
+{
+	if (!hv_clock_event)
+		return;
+
+	if (direct_mode_enabled) {
+		cpuhp_remove_state(CPUHP_AP_HYPERV_TIMER_STARTING);
+		hv_remove_stimer0_irq(stimer0_irq);
+		stimer0_irq = 0;
+	}
+	free_percpu(hv_clock_event);
+	hv_clock_event = NULL;
+}
+EXPORT_SYMBOL_GPL(hv_stimer_free);
+
+/*
+ * Do a global cleanup of clockevents for the cases of kexec and
+ * vmbus exit
+ */
+void hv_stimer_global_cleanup(void)
+{
+	int	cpu;
+
+	/*
+	 * hv_stime_legacy_cleanup() will stop the stimer if Direct
+	 * Mode is not enabled, and fallback to the LAPIC timer.
+	 */
+	for_each_present_cpu(cpu) {
+		hv_stimer_legacy_cleanup(cpu);
+	}
+
+	/*
+	 * If Direct Mode is enabled, the cpuhp teardown callback
+	 * (hv_stimer_cleanup) will be run on all CPUs to stop the
+	 * stimers.
+	 */
+	hv_stimer_free();
+}
+EXPORT_SYMBOL_GPL(hv_stimer_global_cleanup);
+
+/*
+ * Code and definitions for the Hyper-V clocksources.  Two
+ * clocksources are defined: one that reads the Hyper-V defined MSR, and
+ * the other that uses the TSC reference page feature as defined in the
+ * TLFS.  The MSR version is for compatibility with old versions of
+ * Hyper-V and 32-bit x86.  The TSC reference page version is preferred.
+ *
+ * The Hyper-V clocksource ratings of 250 are chosen to be below the
+ * TSC clocksource rating of 300.  In configurations where Hyper-V offers
+ * an InvariantTSC, the TSC is not marked "unstable", so the TSC clocksource
+ * is available and preferred.  With the higher rating, it will be the
+ * default.  On older hardware and Hyper-V versions, the TSC is marked
+ * "unstable", so no TSC clocksource is created and the selected Hyper-V
+ * clocksource will be the default.
+ */
+
+u64 (*hv_read_reference_counter)(void);
+EXPORT_SYMBOL_GPL(hv_read_reference_counter);
+
+static union {
+	struct ms_hyperv_tsc_page page;
+	u8 reserved[PAGE_SIZE];
+} tsc_pg __aligned(PAGE_SIZE);
+
+struct ms_hyperv_tsc_page *hv_get_tsc_page(void)
+{
+	return &tsc_pg.page;
+}
+EXPORT_SYMBOL_GPL(hv_get_tsc_page);
+
+static u64 notrace read_hv_clock_tsc(void)
+{
+	u64 current_tick = hv_read_tsc_page(hv_get_tsc_page());
+
+	if (current_tick == U64_MAX)
+		hv_get_time_ref_count(current_tick);
+
+	return current_tick;
+}
+
+static u64 notrace read_hv_clock_tsc_cs(struct clocksource *arg)
+{
+	return read_hv_clock_tsc();
+}
+
+static u64 notrace read_hv_sched_clock_tsc(void)
+{
+	return (read_hv_clock_tsc() - hv_sched_clock_offset) *
+		(NSEC_PER_SEC / HV_CLOCK_HZ);
+}
+
+static void suspend_hv_clock_tsc(struct clocksource *arg)
+{
+	u64 tsc_msr;
+
+	/* Disable the TSC page */
+	hv_get_reference_tsc(tsc_msr);
+	tsc_msr &= ~BIT_ULL(0);
+	hv_set_reference_tsc(tsc_msr);
+}
+
+
+static void resume_hv_clock_tsc(struct clocksource *arg)
+{
+	phys_addr_t phys_addr = virt_to_phys(&tsc_pg);
+	u64 tsc_msr;
+
+	/* Re-enable the TSC page */
+	hv_get_reference_tsc(tsc_msr);
+	tsc_msr &= GENMASK_ULL(11, 0);
+	tsc_msr |= BIT_ULL(0) | (u64)phys_addr;
+	hv_set_reference_tsc(tsc_msr);
+}
+
+static int hv_cs_enable(struct clocksource *cs)
+{
+	hv_enable_vdso_clocksource();
+	return 0;
+}
+
+static struct clocksource hyperv_cs_tsc = {
+	.name	= "hyperv_clocksource_tsc_page",
+	.rating	= 250,
+	.read	= read_hv_clock_tsc_cs,
+	.mask	= CLOCKSOURCE_MASK(64),
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+	.suspend= suspend_hv_clock_tsc,
+	.resume	= resume_hv_clock_tsc,
+	.enable = hv_cs_enable,
+};
+
+static u64 notrace read_hv_clock_msr(void)
+{
+	u64 current_tick;
+	/*
+	 * Read the partition counter to get the current tick count. This count
+	 * is set to 0 when the partition is created and is incremented in
+	 * 100 nanosecond units.
+	 */
+	hv_get_time_ref_count(current_tick);
+	return current_tick;
+}
+
+static u64 notrace read_hv_clock_msr_cs(struct clocksource *arg)
+{
+	return read_hv_clock_msr();
+}
+
+static u64 notrace read_hv_sched_clock_msr(void)
+{
+	return (read_hv_clock_msr() - hv_sched_clock_offset) *
+		(NSEC_PER_SEC / HV_CLOCK_HZ);
+}
+
+static struct clocksource hyperv_cs_msr = {
+	.name	= "hyperv_clocksource_msr",
+	.rating	= 250,
+	.read	= read_hv_clock_msr_cs,
+	.mask	= CLOCKSOURCE_MASK(64),
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static bool __init hv_init_tsc_clocksource(void)
+{
+	u64		tsc_msr;
+	phys_addr_t	phys_addr;
+
+	if (!(ms_hyperv.features & HV_MSR_REFERENCE_TSC_AVAILABLE))
+		return false;
+
+	hv_read_reference_counter = read_hv_clock_tsc;
+	phys_addr = virt_to_phys(hv_get_tsc_page());
+
+	/*
+	 * The Hyper-V TLFS specifies to preserve the value of reserved
+	 * bits in registers. So read the existing value, preserve the
+	 * low order 12 bits, and add in the guest physical address
+	 * (which already has at least the low 12 bits set to zero since
+	 * it is page aligned). Also set the "enable" bit, which is bit 0.
+	 */
+	hv_get_reference_tsc(tsc_msr);
+	tsc_msr &= GENMASK_ULL(11, 0);
+	tsc_msr = tsc_msr | 0x1 | (u64)phys_addr;
+	hv_set_reference_tsc(tsc_msr);
+
+	hv_set_clocksource_vdso(hyperv_cs_tsc);
+	clocksource_register_hz(&hyperv_cs_tsc, NSEC_PER_SEC/100);
+
+	hv_sched_clock_offset = hv_read_reference_counter();
+	hv_setup_sched_clock(read_hv_sched_clock_tsc);
+
+	return true;
+}
+
+void __init hv_init_clocksource(void)
+{
+	/*
+	 * Try to set up the TSC page clocksource. If it succeeds, we're
+	 * done. Otherwise, set up the MSR clocksoruce.  At least one of
+	 * these will always be available except on very old versions of
+	 * Hyper-V on x86.  In that case we won't have a Hyper-V
+	 * clocksource, but Linux will still run with a clocksource based
+	 * on the emulated PIT or LAPIC timer.
+	 */
+	if (hv_init_tsc_clocksource())
+		return;
+
+	if (!(ms_hyperv.features & HV_MSR_TIME_REF_COUNT_AVAILABLE))
+		return;
+
+	hv_read_reference_counter = read_hv_clock_msr;
+	clocksource_register_hz(&hyperv_cs_msr, NSEC_PER_SEC/100);
+
+	hv_sched_clock_offset = hv_read_reference_counter();
+	hv_setup_sched_clock(read_hv_sched_clock_msr);
+}