Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 179 insertions, 0 deletions

diff --git a/drivers/devfreq/imx-bus.c b/drivers/devfreq/imx-bus.c
new file mode 100644
index 000000000..4f38455ad
--- /dev/null
+++ b/drivers/devfreq/imx-bus.c
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <linux/clk.h>
+#include <linux/devfreq.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pm_opp.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct imx_bus {
+	struct devfreq_dev_profile profile;
+	struct devfreq *devfreq;
+	struct clk *clk;
+	struct platform_device *icc_pdev;
+};
+
+static int imx_bus_target(struct device *dev,
+		unsigned long *freq, u32 flags)
+{
+	struct dev_pm_opp *new_opp;
+	int ret;
+
+	new_opp = devfreq_recommended_opp(dev, freq, flags);
+	if (IS_ERR(new_opp)) {
+		ret = PTR_ERR(new_opp);
+		dev_err(dev, "failed to get recommended opp: %d\n", ret);
+		return ret;
+	}
+	dev_pm_opp_put(new_opp);
+
+	return dev_pm_opp_set_rate(dev, *freq);
+}
+
+static int imx_bus_get_cur_freq(struct device *dev, unsigned long *freq)
+{
+	struct imx_bus *priv = dev_get_drvdata(dev);
+
+	*freq = clk_get_rate(priv->clk);
+
+	return 0;
+}
+
+static int imx_bus_get_dev_status(struct device *dev,
+		struct devfreq_dev_status *stat)
+{
+	struct imx_bus *priv = dev_get_drvdata(dev);
+
+	stat->busy_time = 0;
+	stat->total_time = 0;
+	stat->current_frequency = clk_get_rate(priv->clk);
+
+	return 0;
+}
+
+static void imx_bus_exit(struct device *dev)
+{
+	struct imx_bus *priv = dev_get_drvdata(dev);
+
+	dev_pm_opp_of_remove_table(dev);
+	platform_device_unregister(priv->icc_pdev);
+}
+
+/* imx_bus_init_icc() - register matching icc provider if required */
+static int imx_bus_init_icc(struct device *dev)
+{
+	struct imx_bus *priv = dev_get_drvdata(dev);
+	const char *icc_driver_name;
+
+	if (!of_get_property(dev->of_node, "#interconnect-cells", 0))
+		return 0;
+	if (!IS_ENABLED(CONFIG_INTERCONNECT_IMX)) {
+		dev_warn(dev, "imx interconnect drivers disabled\n");
+		return 0;
+	}
+
+	icc_driver_name = of_device_get_match_data(dev);
+	if (!icc_driver_name) {
+		dev_err(dev, "unknown interconnect driver\n");
+		return 0;
+	}
+
+	priv->icc_pdev = platform_device_register_data(
+			dev, icc_driver_name, -1, NULL, 0);
+	if (IS_ERR(priv->icc_pdev)) {
+		dev_err(dev, "failed to register icc provider %s: %ld\n",
+				icc_driver_name, PTR_ERR(priv->icc_pdev));
+		return PTR_ERR(priv->icc_pdev);
+	}
+
+	return 0;
+}
+
+static int imx_bus_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct imx_bus *priv;
+	const char *gov = DEVFREQ_GOV_USERSPACE;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/*
+	 * Fetch the clock to adjust but don't explicitly enable.
+	 *
+	 * For imx bus clock clk_set_rate is safe no matter if the clock is on
+	 * or off and some peripheral side-buses might be off unless enabled by
+	 * drivers for devices on those specific buses.
+	 *
+	 * Rate adjustment on a disabled bus clock just takes effect later.
+	 */
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		ret = PTR_ERR(priv->clk);
+		dev_err(dev, "failed to fetch clk: %d\n", ret);
+		return ret;
+	}
+	platform_set_drvdata(pdev, priv);
+
+	ret = dev_pm_opp_of_add_table(dev);
+	if (ret < 0) {
+		dev_err(dev, "failed to get OPP table\n");
+		return ret;
+	}
+
+	priv->profile.polling_ms = 1000;
+	priv->profile.target = imx_bus_target;
+	priv->profile.get_dev_status = imx_bus_get_dev_status;
+	priv->profile.exit = imx_bus_exit;
+	priv->profile.get_cur_freq = imx_bus_get_cur_freq;
+	priv->profile.initial_freq = clk_get_rate(priv->clk);
+
+	priv->devfreq = devm_devfreq_add_device(dev, &priv->profile,
+						gov, NULL);
+	if (IS_ERR(priv->devfreq)) {
+		ret = PTR_ERR(priv->devfreq);
+		dev_err(dev, "failed to add devfreq device: %d\n", ret);
+		goto err;
+	}
+
+	ret = imx_bus_init_icc(dev);
+	if (ret)
+		goto err;
+
+	return 0;
+
+err:
+	dev_pm_opp_of_remove_table(dev);
+	return ret;
+}
+
+static const struct of_device_id imx_bus_of_match[] = {
+	{ .compatible = "fsl,imx8mq-noc", .data = "imx8mq-interconnect", },
+	{ .compatible = "fsl,imx8mm-noc", .data = "imx8mm-interconnect", },
+	{ .compatible = "fsl,imx8mn-noc", .data = "imx8mn-interconnect", },
+	{ .compatible = "fsl,imx8m-noc", },
+	{ .compatible = "fsl,imx8m-nic", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, imx_bus_of_match);
+
+static struct platform_driver imx_bus_platdrv = {
+	.probe		= imx_bus_probe,
+	.driver = {
+		.name	= "imx-bus-devfreq",
+		.of_match_table = of_match_ptr(imx_bus_of_match),
+	},
+};
+module_platform_driver(imx_bus_platdrv);
+
+MODULE_DESCRIPTION("Generic i.MX bus frequency scaling driver");
+MODULE_AUTHOR("Leonard Crestez <leonard.crestez@nxp.com>");
+MODULE_LICENSE("GPL v2");