Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

9 files changed, 5079 insertions, 0 deletions

diff --git a/drivers/input/tablet/Kconfig b/drivers/input/tablet/Kconfig
new file mode 100644
index 000000000..51c339182
--- /dev/null
+++ b/drivers/input/tablet/Kconfig
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Tablet driver configuration
+#
+menuconfig INPUT_TABLET
+	bool "Tablets"
+	help
+	  Say Y here, and a list of supported tablets will be displayed.
+	  This option doesn't affect the kernel.
+
+	  If unsure, say Y.
+
+if INPUT_TABLET
+
+config TABLET_USB_ACECAD
+	tristate "Acecad Flair tablet support (USB)"
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	help
+	  Say Y here if you want to use the USB version of the Acecad Flair
+	  tablet.  Make sure to say Y to "Mouse support"
+	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+	  (CONFIG_INPUT_EVDEV) as well.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called acecad.
+
+config TABLET_USB_AIPTEK
+	tristate "Aiptek 6000U/8000U and Genius G_PEN tablet support (USB)"
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	help
+	  Say Y here if you want to use the USB version of the Aiptek 6000U,
+	  Aiptek 8000U or Genius G-PEN 560 tablet.  Make sure to say Y to
+	  "Mouse support" (CONFIG_INPUT_MOUSEDEV) and/or "Event interface
+	  support" (CONFIG_INPUT_EVDEV) as well.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called aiptek.
+
+config TABLET_USB_GTCO
+	tristate "GTCO CalComp/InterWrite USB Support"
+	depends on USB && INPUT
+	help
+	  Say Y here if you want to use the USB version of the GTCO
+	  CalComp/InterWrite Tablet.  Make sure to say Y to "Mouse support"
+	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+	  (CONFIG_INPUT_EVDEV) as well.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gtco.
+
+config TABLET_USB_HANWANG
+	tristate "Hanwang Art Master III tablet support (USB)"
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	help
+	  Say Y here if you want to use the USB version of the Hanwang Art
+	  Master III tablet.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hanwang.
+
+config TABLET_USB_KBTAB
+	tristate "KB Gear JamStudio tablet support (USB)"
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	help
+	  Say Y here if you want to use the USB version of the KB Gear
+	  JamStudio tablet.  Make sure to say Y to "Mouse support"
+	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+	  (CONFIG_INPUT_EVDEV) as well.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called kbtab.
+
+config TABLET_USB_PEGASUS
+	tristate "Pegasus Mobile Notetaker Pen input tablet support"
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	help
+	  Say Y here if you want to use the Pegasus Mobile Notetaker,
+	  also known as:
+	  Genie e-note The Notetaker,
+	  Staedtler Digital ballpoint pen 990 01,
+	  IRISnotes Express or
+	  NEWLink Digital Note Taker.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pegasus_notetaker.
+
+config TABLET_SERIAL_WACOM4
+	tristate "Wacom protocol 4 serial tablet support"
+	select SERIO
+	help
+	  Say Y here if you want to use Wacom protocol 4 serial tablets.
+	  E.g. serial versions of the Cintiq, Graphire or Penpartner.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wacom_serial4.
+
+endif
diff --git a/drivers/input/tablet/Makefile b/drivers/input/tablet/Makefile
new file mode 100644
index 000000000..8279ccc18
--- /dev/null
+++ b/drivers/input/tablet/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the tablet drivers
+#
+
+
+obj-$(CONFIG_TABLET_USB_ACECAD)	+= acecad.o
+obj-$(CONFIG_TABLET_USB_AIPTEK)	+= aiptek.o
+obj-$(CONFIG_TABLET_USB_GTCO)	+= gtco.o
+obj-$(CONFIG_TABLET_USB_HANWANG) += hanwang.o
+obj-$(CONFIG_TABLET_USB_KBTAB)	+= kbtab.o
+obj-$(CONFIG_TABLET_USB_PEGASUS) += pegasus_notetaker.o
+obj-$(CONFIG_TABLET_SERIAL_WACOM4) += wacom_serial4.o
diff --git a/drivers/input/tablet/acecad.c b/drivers/input/tablet/acecad.c
new file mode 100644
index 000000000..a38d1fe97
--- /dev/null
+++ b/drivers/input/tablet/acecad.c
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (c) 2001-2005 Edouard TISSERANT   <edouard.tisserant@wanadoo.fr>
+ *  Copyright (c) 2004-2005 Stephane VOLTZ      <svoltz@numericable.fr>
+ *
+ *  USB Acecad "Acecad Flair" tablet support
+ *
+ *  Changelog:
+ *      v3.2 - Added sysfs support
+ */
+
+/*
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+
+MODULE_AUTHOR("Edouard TISSERANT <edouard.tisserant@wanadoo.fr>");
+MODULE_DESCRIPTION("USB Acecad Flair tablet driver");
+MODULE_LICENSE("GPL");
+
+#define USB_VENDOR_ID_ACECAD	0x0460
+#define USB_DEVICE_ID_FLAIR	0x0004
+#define USB_DEVICE_ID_302	0x0008
+
+struct usb_acecad {
+	char name[128];
+	char phys[64];
+	struct usb_interface *intf;
+	struct input_dev *input;
+	struct urb *irq;
+
+	unsigned char *data;
+	dma_addr_t data_dma;
+};
+
+static void usb_acecad_irq(struct urb *urb)
+{
+	struct usb_acecad *acecad = urb->context;
+	unsigned char *data = acecad->data;
+	struct input_dev *dev = acecad->input;
+	struct usb_interface *intf = acecad->intf;
+	struct usb_device *udev = interface_to_usbdev(intf);
+	int prox, status;
+
+	switch (urb->status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_dbg(&intf->dev, "%s - urb shutting down with status: %d\n",
+			__func__, urb->status);
+		return;
+	default:
+		dev_dbg(&intf->dev, "%s - nonzero urb status received: %d\n",
+			__func__, urb->status);
+		goto resubmit;
+	}
+
+	prox = (data[0] & 0x04) >> 2;
+	input_report_key(dev, BTN_TOOL_PEN, prox);
+
+	if (prox) {
+		int x = data[1] | (data[2] << 8);
+		int y = data[3] | (data[4] << 8);
+		/* Pressure should compute the same way for flair and 302 */
+		int pressure = data[5] | (data[6] << 8);
+		int touch = data[0] & 0x01;
+		int stylus = (data[0] & 0x10) >> 4;
+		int stylus2 = (data[0] & 0x20) >> 5;
+		input_report_abs(dev, ABS_X, x);
+		input_report_abs(dev, ABS_Y, y);
+		input_report_abs(dev, ABS_PRESSURE, pressure);
+		input_report_key(dev, BTN_TOUCH, touch);
+		input_report_key(dev, BTN_STYLUS, stylus);
+		input_report_key(dev, BTN_STYLUS2, stylus2);
+	}
+
+	/* event termination */
+	input_sync(dev);
+
+resubmit:
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (status)
+		dev_err(&intf->dev,
+			"can't resubmit intr, %s-%s/input0, status %d\n",
+			udev->bus->bus_name,
+			udev->devpath, status);
+}
+
+static int usb_acecad_open(struct input_dev *dev)
+{
+	struct usb_acecad *acecad = input_get_drvdata(dev);
+
+	acecad->irq->dev = interface_to_usbdev(acecad->intf);
+	if (usb_submit_urb(acecad->irq, GFP_KERNEL))
+		return -EIO;
+
+	return 0;
+}
+
+static void usb_acecad_close(struct input_dev *dev)
+{
+	struct usb_acecad *acecad = input_get_drvdata(dev);
+
+	usb_kill_urb(acecad->irq);
+}
+
+static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_host_interface *interface = intf->cur_altsetting;
+	struct usb_endpoint_descriptor *endpoint;
+	struct usb_acecad *acecad;
+	struct input_dev *input_dev;
+	int pipe, maxp;
+	int err;
+
+	if (interface->desc.bNumEndpoints != 1)
+		return -ENODEV;
+
+	endpoint = &interface->endpoint[0].desc;
+
+	if (!usb_endpoint_is_int_in(endpoint))
+		return -ENODEV;
+
+	pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
+	maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
+
+	acecad = kzalloc(sizeof(struct usb_acecad), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!acecad || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	acecad->data = usb_alloc_coherent(dev, 8, GFP_KERNEL, &acecad->data_dma);
+	if (!acecad->data) {
+		err= -ENOMEM;
+		goto fail1;
+	}
+
+	acecad->irq = usb_alloc_urb(0, GFP_KERNEL);
+	if (!acecad->irq) {
+		err = -ENOMEM;
+		goto fail2;
+	}
+
+	acecad->intf = intf;
+	acecad->input = input_dev;
+
+	if (dev->manufacturer)
+		strlcpy(acecad->name, dev->manufacturer, sizeof(acecad->name));
+
+	if (dev->product) {
+		if (dev->manufacturer)
+			strlcat(acecad->name, " ", sizeof(acecad->name));
+		strlcat(acecad->name, dev->product, sizeof(acecad->name));
+	}
+
+	usb_make_path(dev, acecad->phys, sizeof(acecad->phys));
+	strlcat(acecad->phys, "/input0", sizeof(acecad->phys));
+
+	input_dev->name = acecad->name;
+	input_dev->phys = acecad->phys;
+	usb_to_input_id(dev, &input_dev->id);
+	input_dev->dev.parent = &intf->dev;
+
+	input_set_drvdata(input_dev, acecad);
+
+	input_dev->open = usb_acecad_open;
+	input_dev->close = usb_acecad_close;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_DIGI)] = BIT_MASK(BTN_TOOL_PEN) |
+		BIT_MASK(BTN_TOUCH) | BIT_MASK(BTN_STYLUS) |
+		BIT_MASK(BTN_STYLUS2);
+
+	switch (id->driver_info) {
+	case 0:
+		input_set_abs_params(input_dev, ABS_X, 0, 5000, 4, 0);
+		input_set_abs_params(input_dev, ABS_Y, 0, 3750, 4, 0);
+		input_set_abs_params(input_dev, ABS_PRESSURE, 0, 512, 0, 0);
+		if (!strlen(acecad->name))
+			snprintf(acecad->name, sizeof(acecad->name),
+				"USB Acecad Flair Tablet %04x:%04x",
+				le16_to_cpu(dev->descriptor.idVendor),
+				le16_to_cpu(dev->descriptor.idProduct));
+		break;
+
+	case 1:
+		input_set_abs_params(input_dev, ABS_X, 0, 53000, 4, 0);
+		input_set_abs_params(input_dev, ABS_Y, 0, 2250, 4, 0);
+		input_set_abs_params(input_dev, ABS_PRESSURE, 0, 1024, 0, 0);
+		if (!strlen(acecad->name))
+			snprintf(acecad->name, sizeof(acecad->name),
+				"USB Acecad 302 Tablet %04x:%04x",
+				le16_to_cpu(dev->descriptor.idVendor),
+				le16_to_cpu(dev->descriptor.idProduct));
+		break;
+	}
+
+	usb_fill_int_urb(acecad->irq, dev, pipe,
+			acecad->data, maxp > 8 ? 8 : maxp,
+			usb_acecad_irq, acecad, endpoint->bInterval);
+	acecad->irq->transfer_dma = acecad->data_dma;
+	acecad->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	err = input_register_device(acecad->input);
+	if (err)
+		goto fail3;
+
+	usb_set_intfdata(intf, acecad);
+
+	return 0;
+
+ fail3:	usb_free_urb(acecad->irq);
+ fail2:	usb_free_coherent(dev, 8, acecad->data, acecad->data_dma);
+ fail1: input_free_device(input_dev);
+	kfree(acecad);
+	return err;
+}
+
+static void usb_acecad_disconnect(struct usb_interface *intf)
+{
+	struct usb_acecad *acecad = usb_get_intfdata(intf);
+	struct usb_device *udev = interface_to_usbdev(intf);
+
+	usb_set_intfdata(intf, NULL);
+
+	input_unregister_device(acecad->input);
+	usb_free_urb(acecad->irq);
+	usb_free_coherent(udev, 8, acecad->data, acecad->data_dma);
+	kfree(acecad);
+}
+
+static const struct usb_device_id usb_acecad_id_table[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_FLAIR), .driver_info = 0 },
+	{ USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_302),	 .driver_info = 1 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, usb_acecad_id_table);
+
+static struct usb_driver usb_acecad_driver = {
+	.name =		"usb_acecad",
+	.probe =	usb_acecad_probe,
+	.disconnect =	usb_acecad_disconnect,
+	.id_table =	usb_acecad_id_table,
+};
+
+module_usb_driver(usb_acecad_driver);
diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c
new file mode 100644
index 000000000..8afeefcea
--- /dev/null
+++ b/drivers/input/tablet/aiptek.c
@@ -0,0 +1,1929 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Native support for the Aiptek HyperPen USB Tablets
+ *  (4000U/5000U/6000U/8000U/12000U)
+ *
+ *  Copyright (c) 2001      Chris Atenasio   <chris@crud.net>
+ *  Copyright (c) 2002-2004 Bryan W. Headley <bwheadley@earthlink.net>
+ *
+ *  based on wacom.c by
+ *     Vojtech Pavlik      <vojtech@suse.cz>
+ *     Andreas Bach Aaen   <abach@stofanet.dk>
+ *     Clifford Wolf       <clifford@clifford.at>
+ *     Sam Mosel           <sam.mosel@computer.org>
+ *     James E. Blair      <corvus@gnu.org>
+ *     Daniel Egger        <egger@suse.de>
+ *
+ *  Many thanks to Oliver Kuechemann for his support.
+ *
+ *  ChangeLog:
+ *      v0.1 - Initial release
+ *      v0.2 - Hack to get around fake event 28's. (Bryan W. Headley)
+ *      v0.3 - Make URB dynamic (Bryan W. Headley, Jun-8-2002)
+ *             Released to Linux 2.4.19 and 2.5.x
+ *      v0.4 - Rewrote substantial portions of the code to deal with
+ *             corrected control sequences, timing, dynamic configuration,
+ *             support of 6000U - 12000U, procfs, and macro key support
+ *             (Jan-1-2003 - Feb-5-2003, Bryan W. Headley)
+ *      v1.0 - Added support for diagnostic messages, count of messages
+ *             received from URB - Mar-8-2003, Bryan W. Headley
+ *      v1.1 - added support for tablet resolution, changed DV and proximity
+ *             some corrections - Jun-22-2003, martin schneebacher
+ *           - Added support for the sysfs interface, deprecating the
+ *             procfs interface for 2.5.x kernel. Also added support for
+ *             Wheel command. Bryan W. Headley July-15-2003.
+ *      v1.2 - Reworked jitter timer as a kernel thread.
+ *             Bryan W. Headley November-28-2003/Jan-10-2004.
+ *      v1.3 - Repaired issue of kernel thread going nuts on single-processor
+ *             machines, introduced programmableDelay as a command line
+ *             parameter. Feb 7 2004, Bryan W. Headley.
+ *      v1.4 - Re-wire jitter so it does not require a thread. Courtesy of
+ *             Rene van Paassen. Added reporting of physical pointer device
+ *             (e.g., stylus, mouse in reports 2, 3, 4, 5. We don't know
+ *             for reports 1, 6.)
+ *             what physical device reports for reports 1, 6.) Also enabled
+ *             MOUSE and LENS tool button modes. Renamed "rubber" to "eraser".
+ *             Feb 20, 2004, Bryan W. Headley.
+ *      v1.5 - Added previousJitterable, so we don't do jitter delay when the
+ *             user is holding a button down for periods of time.
+ *
+ * NOTE:
+ *      This kernel driver is augmented by the "Aiptek" XFree86 input
+ *      driver for your X server, as well as the Gaiptek GUI Front-end
+ *      "Tablet Manager".
+ *      These three products are highly interactive with one another,
+ *      so therefore it's easier to document them all as one subsystem.
+ *      Please visit the project's "home page", located at,
+ *      http://aiptektablet.sourceforge.net.
+ */
+
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+#include <linux/uaccess.h>
+#include <asm/unaligned.h>
+
+/*
+ * Aiptek status packet:
+ *
+ * (returned as Report 1 - relative coordinates from mouse and stylus)
+ *
+ *        bit7  bit6  bit5  bit4  bit3  bit2  bit1  bit0
+ * byte0   0     0     0     0     0     0     0     1
+ * byte1   0     0     0     0     0    BS2   BS    Tip
+ * byte2  X7    X6    X5    X4    X3    X2    X1    X0
+ * byte3  Y7    Y6    Y5    Y4    Y3    Y2    Y1    Y0
+ *
+ * (returned as Report 2 - absolute coordinates from the stylus)
+ *
+ *        bit7  bit6  bit5  bit4  bit3  bit2  bit1  bit0
+ * byte0   0     0     0     0     0     0     1     0
+ * byte1  X7    X6    X5    X4    X3    X2    X1    X0
+ * byte2  X15   X14   X13   X12   X11   X10   X9    X8
+ * byte3  Y7    Y6    Y5    Y4    Y3    Y2    Y1    Y0
+ * byte4  Y15   Y14   Y13   Y12   Y11   Y10   Y9    Y8
+ * byte5   *     *     *    BS2   BS1   Tip   IR    DV
+ * byte6  P7    P6    P5    P4    P3    P2    P1    P0
+ * byte7  P15   P14   P13   P12   P11   P10   P9    P8
+ *
+ * (returned as Report 3 - absolute coordinates from the mouse)
+ *
+ *        bit7  bit6  bit5  bit4  bit3  bit2  bit1  bit0
+ * byte0   0     0     0     0     0     0     1     1
+ * byte1  X7    X6    X5    X4    X3    X2    X1    X0
+ * byte2  X15   X14   X13   X12   X11   X10   X9    X8
+ * byte3  Y7    Y6    Y5    Y4    Y3    Y2    Y1    Y0
+ * byte4  Y15   Y14   Y13   Y12   Y11   Y10   Y9    Y8
+ * byte5   *     *     *    BS2   BS1   Tip   IR    DV
+ * byte6  P7    P6    P5    P4    P3    P2    P1    P0
+ * byte7  P15   P14   P13   P12   P11   P10   P9    P8
+ *
+ * (returned as Report 4 - macrokeys from the stylus)
+ *
+ *        bit7  bit6  bit5  bit4  bit3  bit2  bit1  bit0
+ * byte0   0     0     0     0     0     1     0     0
+ * byte1   0     0     0    BS2   BS    Tip   IR    DV
+ * byte2   0     0     0     0     0     0     1     0
+ * byte3   0     0     0    K4    K3    K2    K1    K0
+ * byte4  P7    P6    P5    P4    P3    P2    P1    P0
+ * byte5  P15   P14   P13   P12   P11   P10   P9    P8
+ *
+ * (returned as Report 5 - macrokeys from the mouse)
+ *
+ *        bit7  bit6  bit5  bit4  bit3  bit2  bit1  bit0
+ * byte0   0     0     0     0     0     1     0     1
+ * byte1   0     0     0    BS2   BS    Tip   IR    DV
+ * byte2   0     0     0     0     0     0     1     0
+ * byte3   0     0     0    K4    K3    K2    K1    K0
+ * byte4  P7    P6    P5    P4    P3    P2    P1    P0
+ * byte5  P15   P14   P13   P12   P11   P10   P9    P8
+ *
+ * IR: In Range = Proximity on
+ * DV = Data Valid
+ * BS = Barrel Switch (as in, macro keys)
+ * BS2 also referred to as Tablet Pick
+ *
+ * Command Summary:
+ *
+ * Use report_type CONTROL (3)
+ * Use report_id   2
+ *
+ * Command/Data    Description     Return Bytes    Return Value
+ * 0x10/0x00       SwitchToMouse       0
+ * 0x10/0x01       SwitchToTablet      0
+ * 0x18/0x04       SetResolution       0
+ * 0x12/0xFF       AutoGainOn          0
+ * 0x17/0x00       FilterOn            0
+ * 0x01/0x00       GetXExtension       2           MaxX
+ * 0x01/0x01       GetYExtension       2           MaxY
+ * 0x02/0x00       GetModelCode        2           ModelCode = LOBYTE
+ * 0x03/0x00       GetODMCode          2           ODMCode
+ * 0x08/0x00       GetPressureLevels   2           =512
+ * 0x04/0x00       GetFirmwareVersion  2           Firmware Version
+ * 0x11/0x02       EnableMacroKeys     0
+ *
+ * To initialize the tablet:
+ *
+ * (1) Send Resolution500LPI (Command)
+ * (2) Query for Model code (Option Report)
+ * (3) Query for ODM code (Option Report)
+ * (4) Query for firmware (Option Report)
+ * (5) Query for GetXExtension (Option Report)
+ * (6) Query for GetYExtension (Option Report)
+ * (7) Query for GetPressureLevels (Option Report)
+ * (8) SwitchToTablet for Absolute coordinates, or
+ *     SwitchToMouse for Relative coordinates (Command)
+ * (9) EnableMacroKeys (Command)
+ * (10) FilterOn (Command)
+ * (11) AutoGainOn (Command)
+ *
+ * (Step 9 can be omitted, but you'll then have no function keys.)
+ */
+
+#define USB_VENDOR_ID_AIPTEK				0x08ca
+#define USB_VENDOR_ID_KYE				0x0458
+#define USB_REQ_GET_REPORT				0x01
+#define USB_REQ_SET_REPORT				0x09
+
+	/* PointerMode codes
+	 */
+#define AIPTEK_POINTER_ONLY_MOUSE_MODE			0
+#define AIPTEK_POINTER_ONLY_STYLUS_MODE			1
+#define AIPTEK_POINTER_EITHER_MODE			2
+
+#define AIPTEK_POINTER_ALLOW_MOUSE_MODE(a)		\
+	(a == AIPTEK_POINTER_ONLY_MOUSE_MODE ||		\
+	 a == AIPTEK_POINTER_EITHER_MODE)
+#define AIPTEK_POINTER_ALLOW_STYLUS_MODE(a)		\
+	(a == AIPTEK_POINTER_ONLY_STYLUS_MODE ||	\
+	 a == AIPTEK_POINTER_EITHER_MODE)
+
+	/* CoordinateMode code
+	 */
+#define AIPTEK_COORDINATE_RELATIVE_MODE			0
+#define AIPTEK_COORDINATE_ABSOLUTE_MODE			1
+
+       /* XTilt and YTilt values
+        */
+#define AIPTEK_TILT_MIN					(-128)
+#define AIPTEK_TILT_MAX					127
+#define AIPTEK_TILT_DISABLE				(-10101)
+
+	/* Wheel values
+	 */
+#define AIPTEK_WHEEL_MIN				0
+#define AIPTEK_WHEEL_MAX				1024
+#define AIPTEK_WHEEL_DISABLE				(-10101)
+
+	/* ToolCode values, which BTW are 0x140 .. 0x14f
+	 * We have things set up such that if the tool button has changed,
+	 * the tools get reset.
+	 */
+	/* toolMode codes
+	 */
+#define AIPTEK_TOOL_BUTTON_PEN_MODE			BTN_TOOL_PEN
+#define AIPTEK_TOOL_BUTTON_PENCIL_MODE			BTN_TOOL_PENCIL
+#define AIPTEK_TOOL_BUTTON_BRUSH_MODE			BTN_TOOL_BRUSH
+#define AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE		BTN_TOOL_AIRBRUSH
+#define AIPTEK_TOOL_BUTTON_ERASER_MODE			BTN_TOOL_RUBBER
+#define AIPTEK_TOOL_BUTTON_MOUSE_MODE			BTN_TOOL_MOUSE
+#define AIPTEK_TOOL_BUTTON_LENS_MODE			BTN_TOOL_LENS
+
+	/* Diagnostic message codes
+	 */
+#define AIPTEK_DIAGNOSTIC_NA				0
+#define AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE	1
+#define AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE	2
+#define AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED		3
+
+	/* Time to wait (in ms) to help mask hand jittering
+	 * when pressing the stylus buttons.
+	 */
+#define AIPTEK_JITTER_DELAY_DEFAULT			50
+
+	/* Time to wait (in ms) in-between sending the tablet
+	 * a command and beginning the process of reading the return
+	 * sequence from the tablet.
+	 */
+#define AIPTEK_PROGRAMMABLE_DELAY_25		25
+#define AIPTEK_PROGRAMMABLE_DELAY_50		50
+#define AIPTEK_PROGRAMMABLE_DELAY_100		100
+#define AIPTEK_PROGRAMMABLE_DELAY_200		200
+#define AIPTEK_PROGRAMMABLE_DELAY_300		300
+#define AIPTEK_PROGRAMMABLE_DELAY_400		400
+#define AIPTEK_PROGRAMMABLE_DELAY_DEFAULT	AIPTEK_PROGRAMMABLE_DELAY_400
+
+	/* Mouse button programming
+	 */
+#define AIPTEK_MOUSE_LEFT_BUTTON		0x04
+#define AIPTEK_MOUSE_RIGHT_BUTTON		0x08
+#define AIPTEK_MOUSE_MIDDLE_BUTTON		0x10
+
+	/* Stylus button programming
+	 */
+#define AIPTEK_STYLUS_LOWER_BUTTON		0x08
+#define AIPTEK_STYLUS_UPPER_BUTTON		0x10
+
+	/* Length of incoming packet from the tablet
+	 */
+#define AIPTEK_PACKET_LENGTH			8
+
+	/* We report in EV_MISC both the proximity and
+	 * whether the report came from the stylus, tablet mouse
+	 * or "unknown" -- Unknown when the tablet is in relative
+	 * mode, because we only get report 1's.
+	 */
+#define AIPTEK_REPORT_TOOL_UNKNOWN		0x10
+#define AIPTEK_REPORT_TOOL_STYLUS		0x20
+#define AIPTEK_REPORT_TOOL_MOUSE		0x40
+
+static int programmableDelay = AIPTEK_PROGRAMMABLE_DELAY_DEFAULT;
+static int jitterDelay = AIPTEK_JITTER_DELAY_DEFAULT;
+
+struct aiptek_features {
+	int odmCode;		/* Tablet manufacturer code       */
+	int modelCode;		/* Tablet model code (not unique) */
+	int firmwareCode;	/* prom/eeprom version            */
+	char usbPath[64 + 1];	/* device's physical usb path     */
+};
+
+struct aiptek_settings {
+	int pointerMode;	/* stylus-, mouse-only or either */
+	int coordinateMode;	/* absolute/relative coords      */
+	int toolMode;		/* pen, pencil, brush, etc. tool */
+	int xTilt;		/* synthetic xTilt amount        */
+	int yTilt;		/* synthetic yTilt amount        */
+	int wheel;		/* synthetic wheel amount        */
+	int stylusButtonUpper;	/* stylus upper btn delivers...  */
+	int stylusButtonLower;	/* stylus lower btn delivers...  */
+	int mouseButtonLeft;	/* mouse left btn delivers...    */
+	int mouseButtonMiddle;	/* mouse middle btn delivers...  */
+	int mouseButtonRight;	/* mouse right btn delivers...   */
+	int programmableDelay;	/* delay for tablet programming  */
+	int jitterDelay;	/* delay for hand jittering      */
+};
+
+struct aiptek {
+	struct input_dev *inputdev;		/* input device struct           */
+	struct usb_interface *intf;		/* usb interface struct          */
+	struct urb *urb;			/* urb for incoming reports      */
+	dma_addr_t data_dma;			/* our dma stuffage              */
+	struct aiptek_features features;	/* tablet's array of features    */
+	struct aiptek_settings curSetting;	/* tablet's current programmable */
+	struct aiptek_settings newSetting;	/* ... and new param settings    */
+	unsigned int ifnum;			/* interface number for IO       */
+	int diagnostic;				/* tablet diagnostic codes       */
+	unsigned long eventCount;		/* event count                   */
+	int inDelay;				/* jitter: in jitter delay?      */
+	unsigned long endDelay;			/* jitter: time when delay ends  */
+	int previousJitterable;			/* jitterable prev value     */
+
+	int lastMacro;				/* macro key to reset            */
+	int previousToolMode;			/* pen, pencil, brush, etc. tool */
+	unsigned char *data;			/* incoming packet data          */
+};
+
+static const int eventTypes[] = {
+        EV_KEY, EV_ABS, EV_REL, EV_MSC,
+};
+
+static const int absEvents[] = {
+        ABS_X, ABS_Y, ABS_PRESSURE, ABS_TILT_X, ABS_TILT_Y,
+        ABS_WHEEL, ABS_MISC,
+};
+
+static const int relEvents[] = {
+        REL_X, REL_Y, REL_WHEEL,
+};
+
+static const int buttonEvents[] = {
+	BTN_LEFT, BTN_RIGHT, BTN_MIDDLE,
+	BTN_TOOL_PEN, BTN_TOOL_RUBBER, BTN_TOOL_PENCIL, BTN_TOOL_AIRBRUSH,
+	BTN_TOOL_BRUSH, BTN_TOOL_MOUSE, BTN_TOOL_LENS, BTN_TOUCH,
+	BTN_STYLUS, BTN_STYLUS2,
+};
+
+/*
+ * Permit easy lookup of keyboard events to send, versus
+ * the bitmap which comes from the tablet. This hides the
+ * issue that the F_keys are not sequentially numbered.
+ */
+static const int macroKeyEvents[] = {
+	KEY_ESC, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5,
+	KEY_F6, KEY_F7, KEY_F8, KEY_F9, KEY_F10, KEY_F11,
+	KEY_F12, KEY_F13, KEY_F14, KEY_F15, KEY_F16, KEY_F17,
+	KEY_F18, KEY_F19, KEY_F20, KEY_F21, KEY_F22, KEY_F23,
+	KEY_F24, KEY_STOP, KEY_AGAIN, KEY_PROPS, KEY_UNDO,
+	KEY_FRONT, KEY_COPY, KEY_OPEN, KEY_PASTE, 0
+};
+
+/***********************************************************************
+ * Map values to strings and back. Every map should have the following
+ * as its last element: { NULL, AIPTEK_INVALID_VALUE }.
+ */
+#define AIPTEK_INVALID_VALUE	-1
+
+struct aiptek_map {
+	const char *string;
+	int value;
+};
+
+static int map_str_to_val(const struct aiptek_map *map, const char *str, size_t count)
+{
+	const struct aiptek_map *p;
+
+	if (str[count - 1] == '\n')
+		count--;
+
+	for (p = map; p->string; p++)
+	        if (!strncmp(str, p->string, count))
+			return p->value;
+
+	return AIPTEK_INVALID_VALUE;
+}
+
+static const char *map_val_to_str(const struct aiptek_map *map, int val)
+{
+	const struct aiptek_map *p;
+
+	for (p = map; p->value != AIPTEK_INVALID_VALUE; p++)
+		if (val == p->value)
+			return p->string;
+
+	return "unknown";
+}
+
+/***********************************************************************
+ * aiptek_irq can receive one of six potential reports.
+ * The documentation for each is in the body of the function.
+ *
+ * The tablet reports on several attributes per invocation of
+ * aiptek_irq. Because the Linux Input Event system allows the
+ * transmission of ONE attribute per input_report_xxx() call,
+ * collation has to be done on the other end to reconstitute
+ * a complete tablet report. Further, the number of Input Event reports
+ * submitted varies, depending on what USB report type, and circumstance.
+ * To deal with this, EV_MSC is used to indicate an 'end-of-report'
+ * message. This has been an undocumented convention understood by the kernel
+ * tablet driver and clients such as gpm and XFree86's tablet drivers.
+ *
+ * Of the information received from the tablet, the one piece I
+ * cannot transmit is the proximity bit (without resorting to an EV_MSC
+ * convention above.) I therefore have taken over REL_MISC and ABS_MISC
+ * (for relative and absolute reports, respectively) for communicating
+ * Proximity. Why two events? I thought it interesting to know if the
+ * Proximity event occurred while the tablet was in absolute or relative
+ * mode.
+ * Update: REL_MISC proved not to be such a good idea. With REL_MISC you
+ * get an event transmitted each time. ABS_MISC works better, since it
+ * can be set and re-set. Thus, only using ABS_MISC from now on.
+ *
+ * Other tablets use the notion of a certain minimum stylus pressure
+ * to infer proximity. While that could have been done, that is yet
+ * another 'by convention' behavior, the documentation for which
+ * would be spread between two (or more) pieces of software.
+ *
+ * EV_MSC usage was terminated for this purpose in Linux 2.5.x, and
+ * replaced with the input_sync() method (which emits EV_SYN.)
+ */
+
+static void aiptek_irq(struct urb *urb)
+{
+	struct aiptek *aiptek = urb->context;
+	unsigned char *data = aiptek->data;
+	struct input_dev *inputdev = aiptek->inputdev;
+	struct usb_interface *intf = aiptek->intf;
+	int jitterable = 0;
+	int retval, macro, x, y, z, left, right, middle, p, dv, tip, bs, pck;
+
+	switch (urb->status) {
+	case 0:
+		/* Success */
+		break;
+
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* This urb is terminated, clean up */
+		dev_dbg(&intf->dev, "%s - urb shutting down with status: %d\n",
+			__func__, urb->status);
+		return;
+
+	default:
+		dev_dbg(&intf->dev, "%s - nonzero urb status received: %d\n",
+			__func__, urb->status);
+		goto exit;
+	}
+
+	/* See if we are in a delay loop -- throw out report if true.
+	 */
+	if (aiptek->inDelay == 1 && time_after(aiptek->endDelay, jiffies)) {
+		goto exit;
+	}
+
+	aiptek->inDelay = 0;
+	aiptek->eventCount++;
+
+	/* Report 1 delivers relative coordinates with either a stylus
+	 * or the mouse. You do not know, however, which input
+	 * tool generated the event.
+	 */
+	if (data[0] == 1) {
+		if (aiptek->curSetting.coordinateMode ==
+		    AIPTEK_COORDINATE_ABSOLUTE_MODE) {
+			aiptek->diagnostic =
+			    AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE;
+		} else {
+			x = (signed char) data[2];
+			y = (signed char) data[3];
+
+			/* jitterable keeps track of whether any button has been pressed.
+			 * We're also using it to remap the physical mouse button mask
+			 * to pseudo-settings. (We don't specifically care about it's
+			 * value after moving/transposing mouse button bitmasks, except
+			 * that a non-zero value indicates that one or more
+			 * mouse button was pressed.)
+			 */
+			jitterable = data[1] & 0x07;
+
+			left = (data[1] & aiptek->curSetting.mouseButtonLeft >> 2) != 0 ? 1 : 0;
+			right = (data[1] & aiptek->curSetting.mouseButtonRight >> 2) != 0 ? 1 : 0;
+			middle = (data[1] & aiptek->curSetting.mouseButtonMiddle >> 2) != 0 ? 1 : 0;
+
+			input_report_key(inputdev, BTN_LEFT, left);
+			input_report_key(inputdev, BTN_MIDDLE, middle);
+			input_report_key(inputdev, BTN_RIGHT, right);
+
+			input_report_abs(inputdev, ABS_MISC,
+					 1 | AIPTEK_REPORT_TOOL_UNKNOWN);
+			input_report_rel(inputdev, REL_X, x);
+			input_report_rel(inputdev, REL_Y, y);
+
+			/* Wheel support is in the form of a single-event
+			 * firing.
+			 */
+			if (aiptek->curSetting.wheel != AIPTEK_WHEEL_DISABLE) {
+				input_report_rel(inputdev, REL_WHEEL,
+						 aiptek->curSetting.wheel);
+				aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE;
+			}
+			if (aiptek->lastMacro != -1) {
+			        input_report_key(inputdev,
+						 macroKeyEvents[aiptek->lastMacro], 0);
+				aiptek->lastMacro = -1;
+			}
+			input_sync(inputdev);
+		}
+	}
+	/* Report 2 is delivered only by the stylus, and delivers
+	 * absolute coordinates.
+	 */
+	else if (data[0] == 2) {
+		if (aiptek->curSetting.coordinateMode == AIPTEK_COORDINATE_RELATIVE_MODE) {
+			aiptek->diagnostic = AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE;
+		} else if (!AIPTEK_POINTER_ALLOW_STYLUS_MODE
+			    (aiptek->curSetting.pointerMode)) {
+				aiptek->diagnostic = AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED;
+		} else {
+			x = get_unaligned_le16(data + 1);
+			y = get_unaligned_le16(data + 3);
+			z = get_unaligned_le16(data + 6);
+
+			dv = (data[5] & 0x01) != 0 ? 1 : 0;
+			p = (data[5] & 0x02) != 0 ? 1 : 0;
+			tip = (data[5] & 0x04) != 0 ? 1 : 0;
+
+			/* Use jitterable to re-arrange button masks
+			 */
+			jitterable = data[5] & 0x18;
+
+			bs = (data[5] & aiptek->curSetting.stylusButtonLower) != 0 ? 1 : 0;
+			pck = (data[5] & aiptek->curSetting.stylusButtonUpper) != 0 ? 1 : 0;
+
+			/* dv indicates 'data valid' (e.g., the tablet is in sync
+			 * and has delivered a "correct" report) We will ignore
+			 * all 'bad' reports...
+			 */
+			if (dv != 0) {
+				/* If the selected tool changed, reset the old
+				 * tool key, and set the new one.
+				 */
+				if (aiptek->previousToolMode !=
+				    aiptek->curSetting.toolMode) {
+				        input_report_key(inputdev,
+							 aiptek->previousToolMode, 0);
+					input_report_key(inputdev,
+							 aiptek->curSetting.toolMode,
+							 1);
+					aiptek->previousToolMode =
+					          aiptek->curSetting.toolMode;
+				}
+
+				if (p != 0) {
+					input_report_abs(inputdev, ABS_X, x);
+					input_report_abs(inputdev, ABS_Y, y);
+					input_report_abs(inputdev, ABS_PRESSURE, z);
+
+					input_report_key(inputdev, BTN_TOUCH, tip);
+					input_report_key(inputdev, BTN_STYLUS, bs);
+					input_report_key(inputdev, BTN_STYLUS2, pck);
+
+					if (aiptek->curSetting.xTilt !=
+					    AIPTEK_TILT_DISABLE) {
+						input_report_abs(inputdev,
+								 ABS_TILT_X,
+								 aiptek->curSetting.xTilt);
+					}
+					if (aiptek->curSetting.yTilt != AIPTEK_TILT_DISABLE) {
+						input_report_abs(inputdev,
+								 ABS_TILT_Y,
+								 aiptek->curSetting.yTilt);
+					}
+
+					/* Wheel support is in the form of a single-event
+					 * firing.
+					 */
+					if (aiptek->curSetting.wheel !=
+					    AIPTEK_WHEEL_DISABLE) {
+						input_report_abs(inputdev,
+								 ABS_WHEEL,
+								 aiptek->curSetting.wheel);
+						aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE;
+					}
+				}
+				input_report_abs(inputdev, ABS_MISC, p | AIPTEK_REPORT_TOOL_STYLUS);
+				if (aiptek->lastMacro != -1) {
+			                input_report_key(inputdev,
+							 macroKeyEvents[aiptek->lastMacro], 0);
+					aiptek->lastMacro = -1;
+				}
+				input_sync(inputdev);
+			}
+		}
+	}
+	/* Report 3's come from the mouse in absolute mode.
+	 */
+	else if (data[0] == 3) {
+		if (aiptek->curSetting.coordinateMode == AIPTEK_COORDINATE_RELATIVE_MODE) {
+			aiptek->diagnostic = AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE;
+		} else if (!AIPTEK_POINTER_ALLOW_MOUSE_MODE
+			(aiptek->curSetting.pointerMode)) {
+			aiptek->diagnostic = AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED;
+		} else {
+			x = get_unaligned_le16(data + 1);
+			y = get_unaligned_le16(data + 3);
+
+			jitterable = data[5] & 0x1c;
+
+			dv = (data[5] & 0x01) != 0 ? 1 : 0;
+			p = (data[5] & 0x02) != 0 ? 1 : 0;
+			left = (data[5] & aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0;
+			right = (data[5] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0;
+			middle = (data[5] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0;
+
+			if (dv != 0) {
+				/* If the selected tool changed, reset the old
+				 * tool key, and set the new one.
+				 */
+				if (aiptek->previousToolMode !=
+				    aiptek->curSetting.toolMode) {
+				        input_report_key(inputdev,
+							 aiptek->previousToolMode, 0);
+					input_report_key(inputdev,
+							 aiptek->curSetting.toolMode,
+							 1);
+					aiptek->previousToolMode =
+					          aiptek->curSetting.toolMode;
+				}
+
+				if (p != 0) {
+					input_report_abs(inputdev, ABS_X, x);
+					input_report_abs(inputdev, ABS_Y, y);
+
+					input_report_key(inputdev, BTN_LEFT, left);
+					input_report_key(inputdev, BTN_MIDDLE, middle);
+					input_report_key(inputdev, BTN_RIGHT, right);
+
+					/* Wheel support is in the form of a single-event
+					 * firing.
+					 */
+					if (aiptek->curSetting.wheel != AIPTEK_WHEEL_DISABLE) {
+						input_report_abs(inputdev,
+								 ABS_WHEEL,
+								 aiptek->curSetting.wheel);
+						aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE;
+					}
+				}
+				input_report_abs(inputdev, ABS_MISC, p | AIPTEK_REPORT_TOOL_MOUSE);
+				if (aiptek->lastMacro != -1) {
+			                input_report_key(inputdev,
+							 macroKeyEvents[aiptek->lastMacro], 0);
+				        aiptek->lastMacro = -1;
+				}
+				input_sync(inputdev);
+			}
+		}
+	}
+	/* Report 4s come from the macro keys when pressed by stylus
+	 */
+	else if (data[0] == 4) {
+		jitterable = data[1] & 0x18;
+
+		dv = (data[1] & 0x01) != 0 ? 1 : 0;
+		p = (data[1] & 0x02) != 0 ? 1 : 0;
+		tip = (data[1] & 0x04) != 0 ? 1 : 0;
+		bs = (data[1] & aiptek->curSetting.stylusButtonLower) != 0 ? 1 : 0;
+		pck = (data[1] & aiptek->curSetting.stylusButtonUpper) != 0 ? 1 : 0;
+
+		macro = dv && p && tip && !(data[3] & 1) ? (data[3] >> 1) : -1;
+		z = get_unaligned_le16(data + 4);
+
+		if (dv) {
+		        /* If the selected tool changed, reset the old
+			 * tool key, and set the new one.
+			 */
+		        if (aiptek->previousToolMode !=
+			    aiptek->curSetting.toolMode) {
+			        input_report_key(inputdev,
+						 aiptek->previousToolMode, 0);
+				input_report_key(inputdev,
+						 aiptek->curSetting.toolMode,
+						 1);
+				aiptek->previousToolMode =
+				        aiptek->curSetting.toolMode;
+			}
+		}
+
+		if (aiptek->lastMacro != -1 && aiptek->lastMacro != macro) {
+		        input_report_key(inputdev, macroKeyEvents[aiptek->lastMacro], 0);
+			aiptek->lastMacro = -1;
+		}
+
+		if (macro != -1 && macro != aiptek->lastMacro) {
+			input_report_key(inputdev, macroKeyEvents[macro], 1);
+			aiptek->lastMacro = macro;
+		}
+		input_report_abs(inputdev, ABS_MISC,
+				 p | AIPTEK_REPORT_TOOL_STYLUS);
+		input_sync(inputdev);
+	}
+	/* Report 5s come from the macro keys when pressed by mouse
+	 */
+	else if (data[0] == 5) {
+		jitterable = data[1] & 0x1c;
+
+		dv = (data[1] & 0x01) != 0 ? 1 : 0;
+		p = (data[1] & 0x02) != 0 ? 1 : 0;
+		left = (data[1]& aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0;
+		right = (data[1] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0;
+		middle = (data[1] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0;
+		macro = dv && p && left && !(data[3] & 1) ? (data[3] >> 1) : 0;
+
+		if (dv) {
+		        /* If the selected tool changed, reset the old
+			 * tool key, and set the new one.
+			 */
+		        if (aiptek->previousToolMode !=
+			    aiptek->curSetting.toolMode) {
+		                input_report_key(inputdev,
+						 aiptek->previousToolMode, 0);
+			        input_report_key(inputdev,
+						 aiptek->curSetting.toolMode, 1);
+			        aiptek->previousToolMode = aiptek->curSetting.toolMode;
+			}
+		}
+
+		if (aiptek->lastMacro != -1 && aiptek->lastMacro != macro) {
+		        input_report_key(inputdev, macroKeyEvents[aiptek->lastMacro], 0);
+			aiptek->lastMacro = -1;
+		}
+
+		if (macro != -1 && macro != aiptek->lastMacro) {
+			input_report_key(inputdev, macroKeyEvents[macro], 1);
+			aiptek->lastMacro = macro;
+		}
+
+		input_report_abs(inputdev, ABS_MISC,
+				 p | AIPTEK_REPORT_TOOL_MOUSE);
+		input_sync(inputdev);
+	}
+	/* We have no idea which tool can generate a report 6. Theoretically,
+	 * neither need to, having been given reports 4 & 5 for such use.
+	 * However, report 6 is the 'official-looking' report for macroKeys;
+	 * reports 4 & 5 supposively are used to support unnamed, unknown
+	 * hat switches (which just so happen to be the macroKeys.)
+	 */
+	else if (data[0] == 6) {
+		macro = get_unaligned_le16(data + 1);
+		if (macro > 0) {
+			input_report_key(inputdev, macroKeyEvents[macro - 1],
+					 0);
+		}
+		if (macro < 25) {
+			input_report_key(inputdev, macroKeyEvents[macro + 1],
+					 0);
+		}
+
+		/* If the selected tool changed, reset the old
+		   tool key, and set the new one.
+		*/
+		if (aiptek->previousToolMode !=
+		    aiptek->curSetting.toolMode) {
+		        input_report_key(inputdev,
+					 aiptek->previousToolMode, 0);
+			input_report_key(inputdev,
+					 aiptek->curSetting.toolMode,
+					 1);
+			aiptek->previousToolMode =
+				aiptek->curSetting.toolMode;
+		}
+
+		input_report_key(inputdev, macroKeyEvents[macro], 1);
+		input_report_abs(inputdev, ABS_MISC,
+				 1 | AIPTEK_REPORT_TOOL_UNKNOWN);
+		input_sync(inputdev);
+	} else {
+		dev_dbg(&intf->dev, "Unknown report %d\n", data[0]);
+	}
+
+	/* Jitter may occur when the user presses a button on the stlyus
+	 * or the mouse. What we do to prevent that is wait 'x' milliseconds
+	 * following a 'jitterable' event, which should give the hand some time
+	 * stabilize itself.
+	 *
+	 * We just introduced aiptek->previousJitterable to carry forth the
+	 * notion that jitter occurs when the button state changes from on to off:
+	 * a person drawing, holding a button down is not subject to jittering.
+	 * With that in mind, changing from upper button depressed to lower button
+	 * WILL transition through a jitter delay.
+	 */
+
+	if (aiptek->previousJitterable != jitterable &&
+	    aiptek->curSetting.jitterDelay != 0 && aiptek->inDelay != 1) {
+		aiptek->endDelay = jiffies +
+		    ((aiptek->curSetting.jitterDelay * HZ) / 1000);
+		aiptek->inDelay = 1;
+	}
+	aiptek->previousJitterable = jitterable;
+
+exit:
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval != 0) {
+		dev_err(&intf->dev,
+			"%s - usb_submit_urb failed with result %d\n",
+			__func__, retval);
+	}
+}
+
+/***********************************************************************
+ * These are the USB id's known so far. We do not identify them to
+ * specific Aiptek model numbers, because there has been overlaps,
+ * use, and reuse of id's in existing models. Certain models have
+ * been known to use more than one ID, indicative perhaps of
+ * manufacturing revisions. In any event, we consider these
+ * IDs to not be model-specific nor unique.
+ */
+static const struct usb_device_id aiptek_ids[] = {
+	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x01)},
+	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x10)},
+	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x20)},
+	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x21)},
+	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x22)},
+	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x23)},
+	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x24)},
+	{USB_DEVICE(USB_VENDOR_ID_KYE, 0x5003)},
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, aiptek_ids);
+
+/***********************************************************************
+ * Open an instance of the tablet driver.
+ */
+static int aiptek_open(struct input_dev *inputdev)
+{
+	struct aiptek *aiptek = input_get_drvdata(inputdev);
+
+	aiptek->urb->dev = interface_to_usbdev(aiptek->intf);
+	if (usb_submit_urb(aiptek->urb, GFP_KERNEL) != 0)
+		return -EIO;
+
+	return 0;
+}
+
+/***********************************************************************
+ * Close an instance of the tablet driver.
+ */
+static void aiptek_close(struct input_dev *inputdev)
+{
+	struct aiptek *aiptek = input_get_drvdata(inputdev);
+
+	usb_kill_urb(aiptek->urb);
+}
+
+/***********************************************************************
+ * aiptek_set_report and aiptek_get_report() are borrowed from Linux 2.4.x,
+ * where they were known as usb_set_report and usb_get_report.
+ */
+static int
+aiptek_set_report(struct aiptek *aiptek,
+		  unsigned char report_type,
+		  unsigned char report_id, void *buffer, int size)
+{
+	struct usb_device *udev = interface_to_usbdev(aiptek->intf);
+
+	return usb_control_msg(udev,
+			       usb_sndctrlpipe(udev, 0),
+			       USB_REQ_SET_REPORT,
+			       USB_TYPE_CLASS | USB_RECIP_INTERFACE |
+			       USB_DIR_OUT, (report_type << 8) + report_id,
+			       aiptek->ifnum, buffer, size, 5000);
+}
+
+static int
+aiptek_get_report(struct aiptek *aiptek,
+		  unsigned char report_type,
+		  unsigned char report_id, void *buffer, int size)
+{
+	struct usb_device *udev = interface_to_usbdev(aiptek->intf);
+
+	return usb_control_msg(udev,
+			       usb_rcvctrlpipe(udev, 0),
+			       USB_REQ_GET_REPORT,
+			       USB_TYPE_CLASS | USB_RECIP_INTERFACE |
+			       USB_DIR_IN, (report_type << 8) + report_id,
+			       aiptek->ifnum, buffer, size, 5000);
+}
+
+/***********************************************************************
+ * Send a command to the tablet.
+ */
+static int
+aiptek_command(struct aiptek *aiptek, unsigned char command, unsigned char data)
+{
+	const int sizeof_buf = 3 * sizeof(u8);
+	int ret;
+	u8 *buf;
+
+	buf = kmalloc(sizeof_buf, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	buf[0] = 2;
+	buf[1] = command;
+	buf[2] = data;
+
+	if ((ret =
+	     aiptek_set_report(aiptek, 3, 2, buf, sizeof_buf)) != sizeof_buf) {
+		dev_dbg(&aiptek->intf->dev,
+			"aiptek_program: failed, tried to send: 0x%02x 0x%02x\n",
+			command, data);
+	}
+	kfree(buf);
+	return ret < 0 ? ret : 0;
+}
+
+/***********************************************************************
+ * Retrieve information from the tablet. Querying info is defined as first
+ * sending the {command,data} sequence as a command, followed by a wait
+ * (aka, "programmaticDelay") and then a "read" request.
+ */
+static int
+aiptek_query(struct aiptek *aiptek, unsigned char command, unsigned char data)
+{
+	const int sizeof_buf = 3 * sizeof(u8);
+	int ret;
+	u8 *buf;
+
+	buf = kmalloc(sizeof_buf, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	buf[0] = 2;
+	buf[1] = command;
+	buf[2] = data;
+
+	if (aiptek_command(aiptek, command, data) != 0) {
+		kfree(buf);
+		return -EIO;
+	}
+	msleep(aiptek->curSetting.programmableDelay);
+
+	if ((ret =
+	     aiptek_get_report(aiptek, 3, 2, buf, sizeof_buf)) != sizeof_buf) {
+		dev_dbg(&aiptek->intf->dev,
+			"aiptek_query failed: returned 0x%02x 0x%02x 0x%02x\n",
+			buf[0], buf[1], buf[2]);
+		ret = -EIO;
+	} else {
+		ret = get_unaligned_le16(buf + 1);
+	}
+	kfree(buf);
+	return ret;
+}
+
+/***********************************************************************
+ * Program the tablet into either absolute or relative mode.
+ * We also get information about the tablet's size.
+ */
+static int aiptek_program_tablet(struct aiptek *aiptek)
+{
+	int ret;
+	/* Execute Resolution500LPI */
+	if ((ret = aiptek_command(aiptek, 0x18, 0x04)) < 0)
+		return ret;
+
+	/* Query getModelCode */
+	if ((ret = aiptek_query(aiptek, 0x02, 0x00)) < 0)
+		return ret;
+	aiptek->features.modelCode = ret & 0xff;
+
+	/* Query getODMCode */
+	if ((ret = aiptek_query(aiptek, 0x03, 0x00)) < 0)
+		return ret;
+	aiptek->features.odmCode = ret;
+
+	/* Query getFirmwareCode */
+	if ((ret = aiptek_query(aiptek, 0x04, 0x00)) < 0)
+		return ret;
+	aiptek->features.firmwareCode = ret;
+
+	/* Query getXextension */
+	if ((ret = aiptek_query(aiptek, 0x01, 0x00)) < 0)
+		return ret;
+	input_set_abs_params(aiptek->inputdev, ABS_X, 0, ret - 1, 0, 0);
+
+	/* Query getYextension */
+	if ((ret = aiptek_query(aiptek, 0x01, 0x01)) < 0)
+		return ret;
+	input_set_abs_params(aiptek->inputdev, ABS_Y, 0, ret - 1, 0, 0);
+
+	/* Query getPressureLevels */
+	if ((ret = aiptek_query(aiptek, 0x08, 0x00)) < 0)
+		return ret;
+	input_set_abs_params(aiptek->inputdev, ABS_PRESSURE, 0, ret - 1, 0, 0);
+
+	/* Depending on whether we are in absolute or relative mode, we will
+	 * do a switchToTablet(absolute) or switchToMouse(relative) command.
+	 */
+	if (aiptek->curSetting.coordinateMode ==
+	    AIPTEK_COORDINATE_ABSOLUTE_MODE) {
+		/* Execute switchToTablet */
+		if ((ret = aiptek_command(aiptek, 0x10, 0x01)) < 0) {
+			return ret;
+		}
+	} else {
+		/* Execute switchToMouse */
+		if ((ret = aiptek_command(aiptek, 0x10, 0x00)) < 0) {
+			return ret;
+		}
+	}
+
+	/* Enable the macro keys */
+	if ((ret = aiptek_command(aiptek, 0x11, 0x02)) < 0)
+		return ret;
+#if 0
+	/* Execute FilterOn */
+	if ((ret = aiptek_command(aiptek, 0x17, 0x00)) < 0)
+		return ret;
+#endif
+
+	/* Execute AutoGainOn */
+	if ((ret = aiptek_command(aiptek, 0x12, 0xff)) < 0)
+		return ret;
+
+	/* Reset the eventCount, so we track events from last (re)programming
+	 */
+	aiptek->diagnostic = AIPTEK_DIAGNOSTIC_NA;
+	aiptek->eventCount = 0;
+
+	return 0;
+}
+
+/***********************************************************************
+ * Sysfs functions. Sysfs prefers that individually-tunable parameters
+ * exist in their separate pseudo-files. Summary data that is immutable
+ * may exist in a singular file so long as you don't define a writeable
+ * interface.
+ */
+
+/***********************************************************************
+ * support the 'size' file -- display support
+ */
+static ssize_t show_tabletSize(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%dx%d\n",
+			input_abs_get_max(aiptek->inputdev, ABS_X) + 1,
+			input_abs_get_max(aiptek->inputdev, ABS_Y) + 1);
+}
+
+/* These structs define the sysfs files, param #1 is the name of the
+ * file, param 2 is the file permissions, param 3 & 4 are to the
+ * output generator and input parser routines. Absence of a routine is
+ * permitted -- it only means can't either 'cat' the file, or send data
+ * to it.
+ */
+static DEVICE_ATTR(size, S_IRUGO, show_tabletSize, NULL);
+
+/***********************************************************************
+ * support routines for the 'pointer_mode' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+static struct aiptek_map pointer_mode_map[] = {
+	{ "stylus",	AIPTEK_POINTER_ONLY_STYLUS_MODE },
+	{ "mouse",	AIPTEK_POINTER_ONLY_MOUSE_MODE },
+	{ "either",	AIPTEK_POINTER_EITHER_MODE },
+	{ NULL,		AIPTEK_INVALID_VALUE }
+};
+
+static ssize_t show_tabletPointerMode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			map_val_to_str(pointer_mode_map,
+					aiptek->curSetting.pointerMode));
+}
+
+static ssize_t
+store_tabletPointerMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	int new_mode = map_str_to_val(pointer_mode_map, buf, count);
+
+	if (new_mode == AIPTEK_INVALID_VALUE)
+		return -EINVAL;
+
+	aiptek->newSetting.pointerMode = new_mode;
+	return count;
+}
+
+static DEVICE_ATTR(pointer_mode,
+		   S_IRUGO | S_IWUSR,
+		   show_tabletPointerMode, store_tabletPointerMode);
+
+/***********************************************************************
+ * support routines for the 'coordinate_mode' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+
+static struct aiptek_map coordinate_mode_map[] = {
+	{ "absolute",	AIPTEK_COORDINATE_ABSOLUTE_MODE },
+	{ "relative",	AIPTEK_COORDINATE_RELATIVE_MODE },
+	{ NULL,		AIPTEK_INVALID_VALUE }
+};
+
+static ssize_t show_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			map_val_to_str(coordinate_mode_map,
+					aiptek->curSetting.coordinateMode));
+}
+
+static ssize_t
+store_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	int new_mode = map_str_to_val(coordinate_mode_map, buf, count);
+
+	if (new_mode == AIPTEK_INVALID_VALUE)
+		return -EINVAL;
+
+	aiptek->newSetting.coordinateMode = new_mode;
+	return count;
+}
+
+static DEVICE_ATTR(coordinate_mode,
+		   S_IRUGO | S_IWUSR,
+		   show_tabletCoordinateMode, store_tabletCoordinateMode);
+
+/***********************************************************************
+ * support routines for the 'tool_mode' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+
+static struct aiptek_map tool_mode_map[] = {
+	{ "mouse",	AIPTEK_TOOL_BUTTON_MOUSE_MODE },
+	{ "eraser",	AIPTEK_TOOL_BUTTON_ERASER_MODE },
+	{ "pencil",	AIPTEK_TOOL_BUTTON_PENCIL_MODE },
+	{ "pen",	AIPTEK_TOOL_BUTTON_PEN_MODE },
+	{ "brush",	AIPTEK_TOOL_BUTTON_BRUSH_MODE },
+	{ "airbrush",	AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE },
+	{ "lens",	AIPTEK_TOOL_BUTTON_LENS_MODE },
+	{ NULL,		AIPTEK_INVALID_VALUE }
+};
+
+static ssize_t show_tabletToolMode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			map_val_to_str(tool_mode_map,
+					aiptek->curSetting.toolMode));
+}
+
+static ssize_t
+store_tabletToolMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	int new_mode = map_str_to_val(tool_mode_map, buf, count);
+
+	if (new_mode == AIPTEK_INVALID_VALUE)
+		return -EINVAL;
+
+	aiptek->newSetting.toolMode = new_mode;
+	return count;
+}
+
+static DEVICE_ATTR(tool_mode,
+		   S_IRUGO | S_IWUSR,
+		   show_tabletToolMode, store_tabletToolMode);
+
+/***********************************************************************
+ * support routines for the 'xtilt' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+static ssize_t show_tabletXtilt(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek->curSetting.xTilt == AIPTEK_TILT_DISABLE) {
+		return snprintf(buf, PAGE_SIZE, "disable\n");
+	} else {
+		return snprintf(buf, PAGE_SIZE, "%d\n",
+				aiptek->curSetting.xTilt);
+	}
+}
+
+static ssize_t
+store_tabletXtilt(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	int x;
+
+	if (kstrtoint(buf, 10, &x)) {
+		size_t len = buf[count - 1] == '\n' ? count - 1 : count;
+
+		if (strncmp(buf, "disable", len))
+			return -EINVAL;
+
+		aiptek->newSetting.xTilt = AIPTEK_TILT_DISABLE;
+	} else {
+		if (x < AIPTEK_TILT_MIN || x > AIPTEK_TILT_MAX)
+			return -EINVAL;
+
+		aiptek->newSetting.xTilt = x;
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR(xtilt,
+		   S_IRUGO | S_IWUSR, show_tabletXtilt, store_tabletXtilt);
+
+/***********************************************************************
+ * support routines for the 'ytilt' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+static ssize_t show_tabletYtilt(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek->curSetting.yTilt == AIPTEK_TILT_DISABLE) {
+		return snprintf(buf, PAGE_SIZE, "disable\n");
+	} else {
+		return snprintf(buf, PAGE_SIZE, "%d\n",
+				aiptek->curSetting.yTilt);
+	}
+}
+
+static ssize_t
+store_tabletYtilt(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	int y;
+
+	if (kstrtoint(buf, 10, &y)) {
+		size_t len = buf[count - 1] == '\n' ? count - 1 : count;
+
+		if (strncmp(buf, "disable", len))
+			return -EINVAL;
+
+		aiptek->newSetting.yTilt = AIPTEK_TILT_DISABLE;
+	} else {
+		if (y < AIPTEK_TILT_MIN || y > AIPTEK_TILT_MAX)
+			return -EINVAL;
+
+		aiptek->newSetting.yTilt = y;
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR(ytilt,
+		   S_IRUGO | S_IWUSR, show_tabletYtilt, store_tabletYtilt);
+
+/***********************************************************************
+ * support routines for the 'jitter' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+static ssize_t show_tabletJitterDelay(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", aiptek->curSetting.jitterDelay);
+}
+
+static ssize_t
+store_tabletJitterDelay(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	int err, j;
+
+	err = kstrtoint(buf, 10, &j);
+	if (err)
+		return err;
+
+	aiptek->newSetting.jitterDelay = j;
+	return count;
+}
+
+static DEVICE_ATTR(jitter,
+		   S_IRUGO | S_IWUSR,
+		   show_tabletJitterDelay, store_tabletJitterDelay);
+
+/***********************************************************************
+ * support routines for the 'delay' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+static ssize_t show_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+			aiptek->curSetting.programmableDelay);
+}
+
+static ssize_t
+store_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	int err, d;
+
+	err = kstrtoint(buf, 10, &d);
+	if (err)
+		return err;
+
+	aiptek->newSetting.programmableDelay = d;
+	return count;
+}
+
+static DEVICE_ATTR(delay,
+		   S_IRUGO | S_IWUSR,
+		   show_tabletProgrammableDelay, store_tabletProgrammableDelay);
+
+/***********************************************************************
+ * support routines for the 'event_count' file. Note that this file
+ * only displays current setting.
+ */
+static ssize_t show_tabletEventsReceived(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%ld\n", aiptek->eventCount);
+}
+
+static DEVICE_ATTR(event_count, S_IRUGO, show_tabletEventsReceived, NULL);
+
+/***********************************************************************
+ * support routines for the 'diagnostic' file. Note that this file
+ * only displays current setting.
+ */
+static ssize_t show_tabletDiagnosticMessage(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	char *retMsg;
+
+	switch (aiptek->diagnostic) {
+	case AIPTEK_DIAGNOSTIC_NA:
+		retMsg = "no errors\n";
+		break;
+
+	case AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE:
+		retMsg = "Error: receiving relative reports\n";
+		break;
+
+	case AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE:
+		retMsg = "Error: receiving absolute reports\n";
+		break;
+
+	case AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED:
+		if (aiptek->curSetting.pointerMode ==
+		    AIPTEK_POINTER_ONLY_MOUSE_MODE) {
+			retMsg = "Error: receiving stylus reports\n";
+		} else {
+			retMsg = "Error: receiving mouse reports\n";
+		}
+		break;
+
+	default:
+		return 0;
+	}
+	return snprintf(buf, PAGE_SIZE, retMsg);
+}
+
+static DEVICE_ATTR(diagnostic, S_IRUGO, show_tabletDiagnosticMessage, NULL);
+
+/***********************************************************************
+ * support routines for the 'stylus_upper' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+
+static struct aiptek_map stylus_button_map[] = {
+	{ "upper",	AIPTEK_STYLUS_UPPER_BUTTON },
+	{ "lower",	AIPTEK_STYLUS_LOWER_BUTTON },
+	{ NULL,		AIPTEK_INVALID_VALUE }
+};
+
+static ssize_t show_tabletStylusUpper(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			map_val_to_str(stylus_button_map,
+					aiptek->curSetting.stylusButtonUpper));
+}
+
+static ssize_t
+store_tabletStylusUpper(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	int new_button = map_str_to_val(stylus_button_map, buf, count);
+
+	if (new_button == AIPTEK_INVALID_VALUE)
+		return -EINVAL;
+
+	aiptek->newSetting.stylusButtonUpper = new_button;
+	return count;
+}
+
+static DEVICE_ATTR(stylus_upper,
+		   S_IRUGO | S_IWUSR,
+		   show_tabletStylusUpper, store_tabletStylusUpper);
+
+/***********************************************************************
+ * support routines for the 'stylus_lower' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+
+static ssize_t show_tabletStylusLower(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			map_val_to_str(stylus_button_map,
+					aiptek->curSetting.stylusButtonLower));
+}
+
+static ssize_t
+store_tabletStylusLower(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	int new_button = map_str_to_val(stylus_button_map, buf, count);
+
+	if (new_button == AIPTEK_INVALID_VALUE)
+		return -EINVAL;
+
+	aiptek->newSetting.stylusButtonLower = new_button;
+	return count;
+}
+
+static DEVICE_ATTR(stylus_lower,
+		   S_IRUGO | S_IWUSR,
+		   show_tabletStylusLower, store_tabletStylusLower);
+
+/***********************************************************************
+ * support routines for the 'mouse_left' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+
+static struct aiptek_map mouse_button_map[] = {
+	{ "left",	AIPTEK_MOUSE_LEFT_BUTTON },
+	{ "middle",	AIPTEK_MOUSE_MIDDLE_BUTTON },
+	{ "right",	AIPTEK_MOUSE_RIGHT_BUTTON },
+	{ NULL,		AIPTEK_INVALID_VALUE }
+};
+
+static ssize_t show_tabletMouseLeft(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			map_val_to_str(mouse_button_map,
+					aiptek->curSetting.mouseButtonLeft));
+}
+
+static ssize_t
+store_tabletMouseLeft(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	int new_button = map_str_to_val(mouse_button_map, buf, count);
+
+	if (new_button == AIPTEK_INVALID_VALUE)
+		return -EINVAL;
+
+	aiptek->newSetting.mouseButtonLeft = new_button;
+	return count;
+}
+
+static DEVICE_ATTR(mouse_left,
+		   S_IRUGO | S_IWUSR,
+		   show_tabletMouseLeft, store_tabletMouseLeft);
+
+/***********************************************************************
+ * support routines for the 'mouse_middle' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+static ssize_t show_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			map_val_to_str(mouse_button_map,
+					aiptek->curSetting.mouseButtonMiddle));
+}
+
+static ssize_t
+store_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	int new_button = map_str_to_val(mouse_button_map, buf, count);
+
+	if (new_button == AIPTEK_INVALID_VALUE)
+		return -EINVAL;
+
+	aiptek->newSetting.mouseButtonMiddle = new_button;
+	return count;
+}
+
+static DEVICE_ATTR(mouse_middle,
+		   S_IRUGO | S_IWUSR,
+		   show_tabletMouseMiddle, store_tabletMouseMiddle);
+
+/***********************************************************************
+ * support routines for the 'mouse_right' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+static ssize_t show_tabletMouseRight(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			map_val_to_str(mouse_button_map,
+					aiptek->curSetting.mouseButtonRight));
+}
+
+static ssize_t
+store_tabletMouseRight(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	int new_button = map_str_to_val(mouse_button_map, buf, count);
+
+	if (new_button == AIPTEK_INVALID_VALUE)
+		return -EINVAL;
+
+	aiptek->newSetting.mouseButtonRight = new_button;
+	return count;
+}
+
+static DEVICE_ATTR(mouse_right,
+		   S_IRUGO | S_IWUSR,
+		   show_tabletMouseRight, store_tabletMouseRight);
+
+/***********************************************************************
+ * support routines for the 'wheel' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+static ssize_t show_tabletWheel(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek->curSetting.wheel == AIPTEK_WHEEL_DISABLE) {
+		return snprintf(buf, PAGE_SIZE, "disable\n");
+	} else {
+		return snprintf(buf, PAGE_SIZE, "%d\n",
+				aiptek->curSetting.wheel);
+	}
+}
+
+static ssize_t
+store_tabletWheel(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	int err, w;
+
+	err = kstrtoint(buf, 10, &w);
+	if (err)
+		return err;
+
+	aiptek->newSetting.wheel = w;
+	return count;
+}
+
+static DEVICE_ATTR(wheel,
+		   S_IRUGO | S_IWUSR, show_tabletWheel, store_tabletWheel);
+
+/***********************************************************************
+ * support routines for the 'execute' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+static ssize_t show_tabletExecute(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	/* There is nothing useful to display, so a one-line manual
+	 * is in order...
+	 */
+	return snprintf(buf, PAGE_SIZE,
+			"Write anything to this file to program your tablet.\n");
+}
+
+static ssize_t
+store_tabletExecute(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	/* We do not care what you write to this file. Merely the action
+	 * of writing to this file triggers a tablet reprogramming.
+	 */
+	memcpy(&aiptek->curSetting, &aiptek->newSetting,
+	       sizeof(struct aiptek_settings));
+
+	if (aiptek_program_tablet(aiptek) < 0)
+		return -EIO;
+
+	return count;
+}
+
+static DEVICE_ATTR(execute,
+		   S_IRUGO | S_IWUSR, show_tabletExecute, store_tabletExecute);
+
+/***********************************************************************
+ * support routines for the 'odm_code' file. Note that this file
+ * only displays current setting.
+ */
+static ssize_t show_tabletODMCode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.odmCode);
+}
+
+static DEVICE_ATTR(odm_code, S_IRUGO, show_tabletODMCode, NULL);
+
+/***********************************************************************
+ * support routines for the 'model_code' file. Note that this file
+ * only displays current setting.
+ */
+static ssize_t show_tabletModelCode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.modelCode);
+}
+
+static DEVICE_ATTR(model_code, S_IRUGO, show_tabletModelCode, NULL);
+
+/***********************************************************************
+ * support routines for the 'firmware_code' file. Note that this file
+ * only displays current setting.
+ */
+static ssize_t show_firmwareCode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%04x\n",
+			aiptek->features.firmwareCode);
+}
+
+static DEVICE_ATTR(firmware_code, S_IRUGO, show_firmwareCode, NULL);
+
+static struct attribute *aiptek_attributes[] = {
+	&dev_attr_size.attr,
+	&dev_attr_pointer_mode.attr,
+	&dev_attr_coordinate_mode.attr,
+	&dev_attr_tool_mode.attr,
+	&dev_attr_xtilt.attr,
+	&dev_attr_ytilt.attr,
+	&dev_attr_jitter.attr,
+	&dev_attr_delay.attr,
+	&dev_attr_event_count.attr,
+	&dev_attr_diagnostic.attr,
+	&dev_attr_odm_code.attr,
+	&dev_attr_model_code.attr,
+	&dev_attr_firmware_code.attr,
+	&dev_attr_stylus_lower.attr,
+	&dev_attr_stylus_upper.attr,
+	&dev_attr_mouse_left.attr,
+	&dev_attr_mouse_middle.attr,
+	&dev_attr_mouse_right.attr,
+	&dev_attr_wheel.attr,
+	&dev_attr_execute.attr,
+	NULL
+};
+
+static const struct attribute_group aiptek_attribute_group = {
+	.attrs	= aiptek_attributes,
+};
+
+/***********************************************************************
+ * This routine is called when a tablet has been identified. It basically
+ * sets up the tablet and the driver's internal structures.
+ */
+static int
+aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *usbdev = interface_to_usbdev(intf);
+	struct usb_endpoint_descriptor *endpoint;
+	struct aiptek *aiptek;
+	struct input_dev *inputdev;
+	int i;
+	int speeds[] = { 0,
+		AIPTEK_PROGRAMMABLE_DELAY_50,
+		AIPTEK_PROGRAMMABLE_DELAY_400,
+		AIPTEK_PROGRAMMABLE_DELAY_25,
+		AIPTEK_PROGRAMMABLE_DELAY_100,
+		AIPTEK_PROGRAMMABLE_DELAY_200,
+		AIPTEK_PROGRAMMABLE_DELAY_300
+	};
+	int err = -ENOMEM;
+
+	/* programmableDelay is where the command-line specified
+	 * delay is kept. We make it the first element of speeds[],
+	 * so therefore, your override speed is tried first, then the
+	 * remainder. Note that the default value of 400ms will be tried
+	 * if you do not specify any command line parameter.
+	 */
+	speeds[0] = programmableDelay;
+
+	aiptek = kzalloc(sizeof(struct aiptek), GFP_KERNEL);
+	inputdev = input_allocate_device();
+	if (!aiptek || !inputdev) {
+		dev_warn(&intf->dev,
+			 "cannot allocate memory or input device\n");
+		goto fail1;
+        }
+
+	aiptek->data = usb_alloc_coherent(usbdev, AIPTEK_PACKET_LENGTH,
+					  GFP_KERNEL, &aiptek->data_dma);
+        if (!aiptek->data) {
+		dev_warn(&intf->dev, "cannot allocate usb buffer\n");
+		goto fail1;
+	}
+
+	aiptek->urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!aiptek->urb) {
+	        dev_warn(&intf->dev, "cannot allocate urb\n");
+		goto fail2;
+	}
+
+	aiptek->inputdev = inputdev;
+	aiptek->intf = intf;
+	aiptek->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
+	aiptek->inDelay = 0;
+	aiptek->endDelay = 0;
+	aiptek->previousJitterable = 0;
+	aiptek->lastMacro = -1;
+
+	/* Set up the curSettings struct. Said struct contains the current
+	 * programmable parameters. The newSetting struct contains changes
+	 * the user makes to the settings via the sysfs interface. Those
+	 * changes are not "committed" to curSettings until the user
+	 * writes to the sysfs/.../execute file.
+	 */
+	aiptek->curSetting.pointerMode = AIPTEK_POINTER_EITHER_MODE;
+	aiptek->curSetting.coordinateMode = AIPTEK_COORDINATE_ABSOLUTE_MODE;
+	aiptek->curSetting.toolMode = AIPTEK_TOOL_BUTTON_PEN_MODE;
+	aiptek->curSetting.xTilt = AIPTEK_TILT_DISABLE;
+	aiptek->curSetting.yTilt = AIPTEK_TILT_DISABLE;
+	aiptek->curSetting.mouseButtonLeft = AIPTEK_MOUSE_LEFT_BUTTON;
+	aiptek->curSetting.mouseButtonMiddle = AIPTEK_MOUSE_MIDDLE_BUTTON;
+	aiptek->curSetting.mouseButtonRight = AIPTEK_MOUSE_RIGHT_BUTTON;
+	aiptek->curSetting.stylusButtonUpper = AIPTEK_STYLUS_UPPER_BUTTON;
+	aiptek->curSetting.stylusButtonLower = AIPTEK_STYLUS_LOWER_BUTTON;
+	aiptek->curSetting.jitterDelay = jitterDelay;
+	aiptek->curSetting.programmableDelay = programmableDelay;
+
+	/* Both structs should have equivalent settings
+	 */
+	aiptek->newSetting = aiptek->curSetting;
+
+	/* Determine the usb devices' physical path.
+	 * Asketh not why we always pretend we're using "../input0",
+	 * but I suspect this will have to be refactored one
+	 * day if a single USB device can be a keyboard & a mouse
+	 * & a tablet, and the inputX number actually will tell
+	 * us something...
+	 */
+	usb_make_path(usbdev, aiptek->features.usbPath,
+			sizeof(aiptek->features.usbPath));
+	strlcat(aiptek->features.usbPath, "/input0",
+		sizeof(aiptek->features.usbPath));
+
+	/* Set up client data, pointers to open and close routines
+	 * for the input device.
+	 */
+	inputdev->name = "Aiptek";
+	inputdev->phys = aiptek->features.usbPath;
+	usb_to_input_id(usbdev, &inputdev->id);
+	inputdev->dev.parent = &intf->dev;
+
+	input_set_drvdata(inputdev, aiptek);
+
+	inputdev->open = aiptek_open;
+	inputdev->close = aiptek_close;
+
+	/* Now program the capacities of the tablet, in terms of being
+	 * an input device.
+	 */
+	for (i = 0; i < ARRAY_SIZE(eventTypes); ++i)
+	        __set_bit(eventTypes[i], inputdev->evbit);
+
+	for (i = 0; i < ARRAY_SIZE(absEvents); ++i)
+	        __set_bit(absEvents[i], inputdev->absbit);
+
+	for (i = 0; i < ARRAY_SIZE(relEvents); ++i)
+	        __set_bit(relEvents[i], inputdev->relbit);
+
+	__set_bit(MSC_SERIAL, inputdev->mscbit);
+
+	/* Set up key and button codes */
+	for (i = 0; i < ARRAY_SIZE(buttonEvents); ++i)
+		__set_bit(buttonEvents[i], inputdev->keybit);
+
+	for (i = 0; i < ARRAY_SIZE(macroKeyEvents); ++i)
+		__set_bit(macroKeyEvents[i], inputdev->keybit);
+
+	/*
+	 * Program the input device coordinate capacities. We do not yet
+	 * know what maximum X, Y, and Z values are, so we're putting fake
+	 * values in. Later, we'll ask the tablet to put in the correct
+	 * values.
+	 */
+	input_set_abs_params(inputdev, ABS_X, 0, 2999, 0, 0);
+	input_set_abs_params(inputdev, ABS_Y, 0, 2249, 0, 0);
+	input_set_abs_params(inputdev, ABS_PRESSURE, 0, 511, 0, 0);
+	input_set_abs_params(inputdev, ABS_TILT_X, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0);
+	input_set_abs_params(inputdev, ABS_TILT_Y, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0);
+	input_set_abs_params(inputdev, ABS_WHEEL, AIPTEK_WHEEL_MIN, AIPTEK_WHEEL_MAX - 1, 0, 0);
+
+	err = usb_find_common_endpoints(intf->cur_altsetting,
+					NULL, NULL, &endpoint, NULL);
+	if (err) {
+		dev_err(&intf->dev,
+			"interface has no int in endpoints, but must have minimum 1\n");
+		goto fail3;
+	}
+
+	/* Go set up our URB, which is called when the tablet receives
+	 * input.
+	 */
+	usb_fill_int_urb(aiptek->urb,
+			 usbdev,
+			 usb_rcvintpipe(usbdev,
+					endpoint->bEndpointAddress),
+			 aiptek->data, 8, aiptek_irq, aiptek,
+			 endpoint->bInterval);
+
+	aiptek->urb->transfer_dma = aiptek->data_dma;
+	aiptek->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	/* Program the tablet. This sets the tablet up in the mode
+	 * specified in newSetting, and also queries the tablet's
+	 * physical capacities.
+	 *
+	 * Sanity check: if a tablet doesn't like the slow programmatic
+	 * delay, we often get sizes of 0x0. Let's use that as an indicator
+	 * to try faster delays, up to 25 ms. If that logic fails, well, you'll
+	 * have to explain to us how your tablet thinks it's 0x0, and yet that's
+	 * not an error :-)
+	 */
+
+	for (i = 0; i < ARRAY_SIZE(speeds); ++i) {
+		aiptek->curSetting.programmableDelay = speeds[i];
+		(void)aiptek_program_tablet(aiptek);
+		if (input_abs_get_max(aiptek->inputdev, ABS_X) > 0) {
+			dev_info(&intf->dev,
+				 "Aiptek using %d ms programming speed\n",
+				 aiptek->curSetting.programmableDelay);
+			break;
+		}
+	}
+
+	/* Murphy says that some day someone will have a tablet that fails the
+	   above test. That's you, Frederic Rodrigo */
+	if (i == ARRAY_SIZE(speeds)) {
+		dev_info(&intf->dev,
+			 "Aiptek tried all speeds, no sane response\n");
+		err = -EINVAL;
+		goto fail3;
+	}
+
+	/* Associate this driver's struct with the usb interface.
+	 */
+	usb_set_intfdata(intf, aiptek);
+
+	/* Set up the sysfs files
+	 */
+	err = sysfs_create_group(&intf->dev.kobj, &aiptek_attribute_group);
+	if (err) {
+		dev_warn(&intf->dev, "cannot create sysfs group err: %d\n",
+			 err);
+		goto fail3;
+        }
+
+	/* Register the tablet as an Input Device
+	 */
+	err = input_register_device(aiptek->inputdev);
+	if (err) {
+		dev_warn(&intf->dev,
+			 "input_register_device returned err: %d\n", err);
+		goto fail4;
+        }
+	return 0;
+
+ fail4:	sysfs_remove_group(&intf->dev.kobj, &aiptek_attribute_group);
+ fail3: usb_free_urb(aiptek->urb);
+ fail2:	usb_free_coherent(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data,
+			  aiptek->data_dma);
+ fail1: usb_set_intfdata(intf, NULL);
+	input_free_device(inputdev);
+	kfree(aiptek);
+	return err;
+}
+
+/***********************************************************************
+ * Deal with tablet disconnecting from the system.
+ */
+static void aiptek_disconnect(struct usb_interface *intf)
+{
+	struct aiptek *aiptek = usb_get_intfdata(intf);
+
+	/* Disassociate driver's struct with usb interface
+	 */
+	usb_set_intfdata(intf, NULL);
+	if (aiptek != NULL) {
+		/* Free & unhook everything from the system.
+		 */
+		usb_kill_urb(aiptek->urb);
+		input_unregister_device(aiptek->inputdev);
+		sysfs_remove_group(&intf->dev.kobj, &aiptek_attribute_group);
+		usb_free_urb(aiptek->urb);
+		usb_free_coherent(interface_to_usbdev(intf),
+				  AIPTEK_PACKET_LENGTH,
+				  aiptek->data, aiptek->data_dma);
+		kfree(aiptek);
+	}
+}
+
+static struct usb_driver aiptek_driver = {
+	.name = "aiptek",
+	.probe = aiptek_probe,
+	.disconnect = aiptek_disconnect,
+	.id_table = aiptek_ids,
+};
+
+module_usb_driver(aiptek_driver);
+
+MODULE_AUTHOR("Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen");
+MODULE_DESCRIPTION("Aiptek HyperPen USB Tablet Driver");
+MODULE_LICENSE("GPL");
+
+module_param(programmableDelay, int, 0);
+MODULE_PARM_DESC(programmableDelay, "delay used during tablet programming");
+module_param(jitterDelay, int, 0);
+MODULE_PARM_DESC(jitterDelay, "stylus/mouse settlement delay");
diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c
new file mode 100644
index 000000000..44bb1f69b
--- /dev/null
+++ b/drivers/input/tablet/gtco.c
@@ -0,0 +1,1043 @@
+/*    -*- linux-c -*-
+
+GTCO digitizer USB driver
+
+TO CHECK:  Is pressure done right on report 5?
+
+Copyright (C) 2006  GTCO CalComp
+
+This program is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License
+as published by the Free Software Foundation; version 2
+of the License.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+
+Permission to use, copy, modify, distribute, and sell this software and its
+documentation for any purpose is hereby granted without fee, provided that
+the above copyright notice appear in all copies and that both that
+copyright notice and this permission notice appear in supporting
+documentation, and that the name of GTCO-CalComp not be used in advertising
+or publicity pertaining to distribution of the software without specific,
+written prior permission. GTCO-CalComp makes no representations about the
+suitability of this software for any purpose.  It is provided "as is"
+without express or implied warranty.
+
+GTCO-CALCOMP DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+EVENT SHALL GTCO-CALCOMP BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+TORTIOUS ACTIONS, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+PERFORMANCE OF THIS SOFTWARE.
+
+GTCO CalComp, Inc.
+7125 Riverwood Drive
+Columbia, MD 21046
+
+Jeremy Roberson jroberson@gtcocalcomp.com
+Scott Hill shill@gtcocalcomp.com
+*/
+
+
+
+/*#define DEBUG*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/uaccess.h>
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+#include <linux/bitops.h>
+
+#include <linux/usb/input.h>
+
+/* Version with a Major number of 2 is for kernel inclusion only. */
+#define  GTCO_VERSION   "2.00.0006"
+
+
+/*   MACROS  */
+
+#define VENDOR_ID_GTCO	      0x078C
+#define PID_400               0x400
+#define PID_401               0x401
+#define PID_1000              0x1000
+#define PID_1001              0x1001
+#define PID_1002              0x1002
+
+/* Max size of a single report */
+#define REPORT_MAX_SIZE       10
+#define MAX_COLLECTION_LEVELS  10
+
+
+/* Bitmask whether pen is in range */
+#define MASK_INRANGE 0x20
+#define MASK_BUTTON  0x01F
+
+#define  PATHLENGTH     64
+
+/* DATA STRUCTURES */
+
+/* Device table */
+static const struct usb_device_id gtco_usbid_table[] = {
+	{ USB_DEVICE(VENDOR_ID_GTCO, PID_400) },
+	{ USB_DEVICE(VENDOR_ID_GTCO, PID_401) },
+	{ USB_DEVICE(VENDOR_ID_GTCO, PID_1000) },
+	{ USB_DEVICE(VENDOR_ID_GTCO, PID_1001) },
+	{ USB_DEVICE(VENDOR_ID_GTCO, PID_1002) },
+	{ }
+};
+MODULE_DEVICE_TABLE (usb, gtco_usbid_table);
+
+
+/* Structure to hold all of our device specific stuff */
+struct gtco {
+
+	struct input_dev  *inputdevice; /* input device struct pointer  */
+	struct usb_interface *intf;	/* the usb interface for this device */
+	struct urb        *urbinfo;	 /* urb for incoming reports      */
+	dma_addr_t        buf_dma;  /* dma addr of the data buffer*/
+	unsigned char *   buffer;   /* databuffer for reports */
+
+	char  usbpath[PATHLENGTH];
+	int   openCount;
+
+	/* Information pulled from Report Descriptor */
+	u32  usage;
+	u32  min_X;
+	u32  max_X;
+	u32  min_Y;
+	u32  max_Y;
+	s8   mintilt_X;
+	s8   maxtilt_X;
+	s8   mintilt_Y;
+	s8   maxtilt_Y;
+	u32  maxpressure;
+	u32  minpressure;
+};
+
+
+
+/*   Code for parsing the HID REPORT DESCRIPTOR          */
+
+/* From HID1.11 spec */
+struct hid_descriptor
+{
+	struct usb_descriptor_header header;
+	__le16   bcdHID;
+	u8       bCountryCode;
+	u8       bNumDescriptors;
+	u8       bDescriptorType;
+	__le16   wDescriptorLength;
+} __attribute__ ((packed));
+
+
+#define HID_DESCRIPTOR_SIZE   9
+#define HID_DEVICE_TYPE       33
+#define REPORT_DEVICE_TYPE    34
+
+
+#define PREF_TAG(x)     ((x)>>4)
+#define PREF_TYPE(x)    ((x>>2)&0x03)
+#define PREF_SIZE(x)    ((x)&0x03)
+
+#define TYPE_MAIN       0
+#define TYPE_GLOBAL     1
+#define TYPE_LOCAL      2
+#define TYPE_RESERVED   3
+
+#define TAG_MAIN_INPUT        0x8
+#define TAG_MAIN_OUTPUT       0x9
+#define TAG_MAIN_FEATURE      0xB
+#define TAG_MAIN_COL_START    0xA
+#define TAG_MAIN_COL_END      0xC
+
+#define TAG_GLOB_USAGE        0
+#define TAG_GLOB_LOG_MIN      1
+#define TAG_GLOB_LOG_MAX      2
+#define TAG_GLOB_PHYS_MIN     3
+#define TAG_GLOB_PHYS_MAX     4
+#define TAG_GLOB_UNIT_EXP     5
+#define TAG_GLOB_UNIT         6
+#define TAG_GLOB_REPORT_SZ    7
+#define TAG_GLOB_REPORT_ID    8
+#define TAG_GLOB_REPORT_CNT   9
+#define TAG_GLOB_PUSH         10
+#define TAG_GLOB_POP          11
+
+#define TAG_GLOB_MAX          12
+
+#define DIGITIZER_USAGE_TIP_PRESSURE   0x30
+#define DIGITIZER_USAGE_TILT_X         0x3D
+#define DIGITIZER_USAGE_TILT_Y         0x3E
+
+
+/*
+ *   This is an abbreviated parser for the HID Report Descriptor.  We
+ *   know what devices we are talking to, so this is by no means meant
+ *   to be generic.  We can make some safe assumptions:
+ *
+ *   - We know there are no LONG tags, all short
+ *   - We know that we have no MAIN Feature and MAIN Output items
+ *   - We know what the IRQ reports are supposed to look like.
+ *
+ *   The main purpose of this is to use the HID report desc to figure
+ *   out the mins and maxs of the fields in the IRQ reports.  The IRQ
+ *   reports for 400/401 change slightly if the max X is bigger than 64K.
+ *
+ */
+static void parse_hid_report_descriptor(struct gtco *device, char * report,
+					int length)
+{
+	struct device *ddev = &device->intf->dev;
+	int   x, i = 0;
+
+	/* Tag primitive vars */
+	__u8   prefix;
+	__u8   size;
+	__u8   tag;
+	__u8   type;
+	__u8   data   = 0;
+	__u16  data16 = 0;
+	__u32  data32 = 0;
+
+	/* For parsing logic */
+	int   inputnum = 0;
+	__u32 usage = 0;
+
+	/* Global Values, indexed by TAG */
+	__u32 globalval[TAG_GLOB_MAX];
+	__u32 oldval[TAG_GLOB_MAX];
+
+	/* Debug stuff */
+	char  maintype = 'x';
+	char  globtype[12];
+	int   indent = 0;
+	char  indentstr[MAX_COLLECTION_LEVELS + 1] = { 0 };
+
+	dev_dbg(ddev, "======>>>>>>PARSE<<<<<<======\n");
+
+	/* Walk  this report and pull out the info we need */
+	while (i < length) {
+		prefix = report[i++];
+
+		/* Determine data size and save the data in the proper variable */
+		size = (1U << PREF_SIZE(prefix)) >> 1;
+		if (i + size > length) {
+			dev_err(ddev,
+				"Not enough data (need %d, have %d)\n",
+				i + size, length);
+			break;
+		}
+
+		switch (size) {
+		case 1:
+			data = report[i];
+			break;
+		case 2:
+			data16 = get_unaligned_le16(&report[i]);
+			break;
+		case 4:
+			data32 = get_unaligned_le32(&report[i]);
+			break;
+		}
+
+		/* Skip size of data */
+		i += size;
+
+		/* What we do depends on the tag type */
+		tag  = PREF_TAG(prefix);
+		type = PREF_TYPE(prefix);
+		switch (type) {
+		case TYPE_MAIN:
+			strcpy(globtype, "");
+			switch (tag) {
+
+			case TAG_MAIN_INPUT:
+				/*
+				 * The INPUT MAIN tag signifies this is
+				 * information from a report.  We need to
+				 * figure out what it is and store the
+				 * min/max values
+				 */
+
+				maintype = 'I';
+				if (data == 2)
+					strcpy(globtype, "Variable");
+				else if (data == 3)
+					strcpy(globtype, "Var|Const");
+
+				dev_dbg(ddev, "::::: Saving Report: %d input #%d Max: 0x%X(%d) Min:0x%X(%d) of %d bits\n",
+					globalval[TAG_GLOB_REPORT_ID], inputnum,
+					globalval[TAG_GLOB_LOG_MAX], globalval[TAG_GLOB_LOG_MAX],
+					globalval[TAG_GLOB_LOG_MIN], globalval[TAG_GLOB_LOG_MIN],
+					globalval[TAG_GLOB_REPORT_SZ] * globalval[TAG_GLOB_REPORT_CNT]);
+
+
+				/*
+				  We can assume that the first two input items
+				  are always the X and Y coordinates.  After
+				  that, we look for everything else by
+				  local usage value
+				 */
+				switch (inputnum) {
+				case 0:  /* X coord */
+					dev_dbg(ddev, "GER: X Usage: 0x%x\n", usage);
+					if (device->max_X == 0) {
+						device->max_X = globalval[TAG_GLOB_LOG_MAX];
+						device->min_X = globalval[TAG_GLOB_LOG_MIN];
+					}
+					break;
+
+				case 1:  /* Y coord */
+					dev_dbg(ddev, "GER: Y Usage: 0x%x\n", usage);
+					if (device->max_Y == 0) {
+						device->max_Y = globalval[TAG_GLOB_LOG_MAX];
+						device->min_Y = globalval[TAG_GLOB_LOG_MIN];
+					}
+					break;
+
+				default:
+					/* Tilt X */
+					if (usage == DIGITIZER_USAGE_TILT_X) {
+						if (device->maxtilt_X == 0) {
+							device->maxtilt_X = globalval[TAG_GLOB_LOG_MAX];
+							device->mintilt_X = globalval[TAG_GLOB_LOG_MIN];
+						}
+					}
+
+					/* Tilt Y */
+					if (usage == DIGITIZER_USAGE_TILT_Y) {
+						if (device->maxtilt_Y == 0) {
+							device->maxtilt_Y = globalval[TAG_GLOB_LOG_MAX];
+							device->mintilt_Y = globalval[TAG_GLOB_LOG_MIN];
+						}
+					}
+
+					/* Pressure */
+					if (usage == DIGITIZER_USAGE_TIP_PRESSURE) {
+						if (device->maxpressure == 0) {
+							device->maxpressure = globalval[TAG_GLOB_LOG_MAX];
+							device->minpressure = globalval[TAG_GLOB_LOG_MIN];
+						}
+					}
+
+					break;
+				}
+
+				inputnum++;
+				break;
+
+			case TAG_MAIN_OUTPUT:
+				maintype = 'O';
+				break;
+
+			case TAG_MAIN_FEATURE:
+				maintype = 'F';
+				break;
+
+			case TAG_MAIN_COL_START:
+				maintype = 'S';
+
+				if (indent == MAX_COLLECTION_LEVELS) {
+					dev_err(ddev, "Collection level %d would exceed limit of %d\n",
+						indent + 1,
+						MAX_COLLECTION_LEVELS);
+					break;
+				}
+
+				if (data == 0) {
+					dev_dbg(ddev, "======>>>>>> Physical\n");
+					strcpy(globtype, "Physical");
+				} else
+					dev_dbg(ddev, "======>>>>>>\n");
+
+				/* Indent the debug output */
+				indent++;
+				for (x = 0; x < indent; x++)
+					indentstr[x] = '-';
+				indentstr[x] = 0;
+
+				/* Save global tags */
+				for (x = 0; x < TAG_GLOB_MAX; x++)
+					oldval[x] = globalval[x];
+
+				break;
+
+			case TAG_MAIN_COL_END:
+				maintype = 'E';
+
+				if (indent == 0) {
+					dev_err(ddev, "Collection level already at zero\n");
+					break;
+				}
+
+				dev_dbg(ddev, "<<<<<<======\n");
+
+				indent--;
+				for (x = 0; x < indent; x++)
+					indentstr[x] = '-';
+				indentstr[x] = 0;
+
+				/* Copy global tags back */
+				for (x = 0; x < TAG_GLOB_MAX; x++)
+					globalval[x] = oldval[x];
+
+				break;
+			}
+
+			switch (size) {
+			case 1:
+				dev_dbg(ddev, "%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x\n",
+					indentstr, tag, maintype, size, globtype, data);
+				break;
+
+			case 2:
+				dev_dbg(ddev, "%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x\n",
+					indentstr, tag, maintype, size, globtype, data16);
+				break;
+
+			case 4:
+				dev_dbg(ddev, "%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x\n",
+					indentstr, tag, maintype, size, globtype, data32);
+				break;
+			}
+			break;
+
+		case TYPE_GLOBAL:
+			switch (tag) {
+			case TAG_GLOB_USAGE:
+				/*
+				 * First time we hit the global usage tag,
+				 * it should tell us the type of device
+				 */
+				if (device->usage == 0)
+					device->usage = data;
+
+				strcpy(globtype, "USAGE");
+				break;
+
+			case TAG_GLOB_LOG_MIN:
+				strcpy(globtype, "LOG_MIN");
+				break;
+
+			case TAG_GLOB_LOG_MAX:
+				strcpy(globtype, "LOG_MAX");
+				break;
+
+			case TAG_GLOB_PHYS_MIN:
+				strcpy(globtype, "PHYS_MIN");
+				break;
+
+			case TAG_GLOB_PHYS_MAX:
+				strcpy(globtype, "PHYS_MAX");
+				break;
+
+			case TAG_GLOB_UNIT_EXP:
+				strcpy(globtype, "EXP");
+				break;
+
+			case TAG_GLOB_UNIT:
+				strcpy(globtype, "UNIT");
+				break;
+
+			case TAG_GLOB_REPORT_SZ:
+				strcpy(globtype, "REPORT_SZ");
+				break;
+
+			case TAG_GLOB_REPORT_ID:
+				strcpy(globtype, "REPORT_ID");
+				/* New report, restart numbering */
+				inputnum = 0;
+				break;
+
+			case TAG_GLOB_REPORT_CNT:
+				strcpy(globtype, "REPORT_CNT");
+				break;
+
+			case TAG_GLOB_PUSH:
+				strcpy(globtype, "PUSH");
+				break;
+
+			case TAG_GLOB_POP:
+				strcpy(globtype, "POP");
+				break;
+			}
+
+			/* Check to make sure we have a good tag number
+			   so we don't overflow array */
+			if (tag < TAG_GLOB_MAX) {
+				switch (size) {
+				case 1:
+					dev_dbg(ddev, "%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x\n",
+						indentstr, globtype, tag, size, data);
+					globalval[tag] = data;
+					break;
+
+				case 2:
+					dev_dbg(ddev, "%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x\n",
+						indentstr, globtype, tag, size, data16);
+					globalval[tag] = data16;
+					break;
+
+				case 4:
+					dev_dbg(ddev, "%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x\n",
+						indentstr, globtype, tag, size, data32);
+					globalval[tag] = data32;
+					break;
+				}
+			} else {
+				dev_dbg(ddev, "%sGLOBALTAG: ILLEGAL TAG:%d SIZE: %d\n",
+					indentstr, tag, size);
+			}
+			break;
+
+		case TYPE_LOCAL:
+			switch (tag) {
+			case TAG_GLOB_USAGE:
+				strcpy(globtype, "USAGE");
+				/* Always 1 byte */
+				usage = data;
+				break;
+
+			case TAG_GLOB_LOG_MIN:
+				strcpy(globtype, "MIN");
+				break;
+
+			case TAG_GLOB_LOG_MAX:
+				strcpy(globtype, "MAX");
+				break;
+
+			default:
+				strcpy(globtype, "UNKNOWN");
+				break;
+			}
+
+			switch (size) {
+			case 1:
+				dev_dbg(ddev, "%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x\n",
+					indentstr, tag, globtype, size, data);
+				break;
+
+			case 2:
+				dev_dbg(ddev, "%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x\n",
+					indentstr, tag, globtype, size, data16);
+				break;
+
+			case 4:
+				dev_dbg(ddev, "%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x\n",
+					indentstr, tag, globtype, size, data32);
+				break;
+			}
+
+			break;
+		}
+	}
+}
+
+/*   INPUT DRIVER Routines                               */
+
+/*
+ * Called when opening the input device.  This will submit the URB to
+ * the usb system so we start getting reports
+ */
+static int gtco_input_open(struct input_dev *inputdev)
+{
+	struct gtco *device = input_get_drvdata(inputdev);
+
+	device->urbinfo->dev = interface_to_usbdev(device->intf);
+	if (usb_submit_urb(device->urbinfo, GFP_KERNEL))
+		return -EIO;
+
+	return 0;
+}
+
+/*
+ * Called when closing the input device.  This will unlink the URB
+ */
+static void gtco_input_close(struct input_dev *inputdev)
+{
+	struct gtco *device = input_get_drvdata(inputdev);
+
+	usb_kill_urb(device->urbinfo);
+}
+
+
+/*
+ *  Setup input device capabilities.  Tell the input system what this
+ *  device is capable of generating.
+ *
+ *  This information is based on what is read from the HID report and
+ *  placed in the struct gtco structure
+ *
+ */
+static void gtco_setup_caps(struct input_dev *inputdev)
+{
+	struct gtco *device = input_get_drvdata(inputdev);
+
+	/* Which events */
+	inputdev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) |
+		BIT_MASK(EV_MSC);
+
+	/* Misc event menu block */
+	inputdev->mscbit[0] = BIT_MASK(MSC_SCAN) | BIT_MASK(MSC_SERIAL) |
+		BIT_MASK(MSC_RAW);
+
+	/* Absolute values based on HID report info */
+	input_set_abs_params(inputdev, ABS_X, device->min_X, device->max_X,
+			     0, 0);
+	input_set_abs_params(inputdev, ABS_Y, device->min_Y, device->max_Y,
+			     0, 0);
+
+	/* Proximity */
+	input_set_abs_params(inputdev, ABS_DISTANCE, 0, 1, 0, 0);
+
+	/* Tilt & pressure */
+	input_set_abs_params(inputdev, ABS_TILT_X, device->mintilt_X,
+			     device->maxtilt_X, 0, 0);
+	input_set_abs_params(inputdev, ABS_TILT_Y, device->mintilt_Y,
+			     device->maxtilt_Y, 0, 0);
+	input_set_abs_params(inputdev, ABS_PRESSURE, device->minpressure,
+			     device->maxpressure, 0, 0);
+
+	/* Transducer */
+	input_set_abs_params(inputdev, ABS_MISC, 0, 0xFF, 0, 0);
+}
+
+/*   USB Routines  */
+
+/*
+ * URB callback routine.  Called when we get IRQ reports from the
+ *  digitizer.
+ *
+ *  This bridges the USB and input device worlds.  It generates events
+ *  on the input device based on the USB reports.
+ */
+static void gtco_urb_callback(struct urb *urbinfo)
+{
+	struct gtco *device = urbinfo->context;
+	struct input_dev  *inputdev;
+	int               rc;
+	u32               val = 0;
+	char              le_buffer[2];
+
+	inputdev = device->inputdevice;
+
+	/* Was callback OK? */
+	if (urbinfo->status == -ECONNRESET ||
+	    urbinfo->status == -ENOENT ||
+	    urbinfo->status == -ESHUTDOWN) {
+
+		/* Shutdown is occurring. Return and don't queue up any more */
+		return;
+	}
+
+	if (urbinfo->status != 0) {
+		/*
+		 * Some unknown error.  Hopefully temporary. Just go and
+		 * requeue an URB
+		 */
+		goto resubmit;
+	}
+
+	/*
+	 * Good URB, now process
+	 */
+
+	/* PID dependent when we interpret the report */
+	if (inputdev->id.product == PID_1000 ||
+	    inputdev->id.product == PID_1001 ||
+	    inputdev->id.product == PID_1002) {
+
+		/*
+		 * Switch on the report ID
+		 * Conveniently, the reports have more information, the higher
+		 * the report number.  We can just fall through the case
+		 * statements if we start with the highest number report
+		 */
+		switch (device->buffer[0]) {
+		case 5:
+			/* Pressure is 9 bits */
+			val = ((u16)(device->buffer[8]) << 1);
+			val |= (u16)(device->buffer[7] >> 7);
+			input_report_abs(inputdev, ABS_PRESSURE,
+					 device->buffer[8]);
+
+			/* Mask out the Y tilt value used for pressure */
+			device->buffer[7] = (u8)((device->buffer[7]) & 0x7F);
+			fallthrough;
+
+		case 4:
+			/* Tilt */
+			input_report_abs(inputdev, ABS_TILT_X,
+					 sign_extend32(device->buffer[6], 6));
+
+			input_report_abs(inputdev, ABS_TILT_Y,
+					 sign_extend32(device->buffer[7], 6));
+			fallthrough;
+
+		case 2:
+		case 3:
+			/* Convert buttons, only 5 bits possible */
+			val = (device->buffer[5]) & MASK_BUTTON;
+
+			/* We don't apply any meaning to the bitmask,
+			   just report */
+			input_event(inputdev, EV_MSC, MSC_SERIAL, val);
+			fallthrough;
+
+		case 1:
+			/* All reports have X and Y coords in the same place */
+			val = get_unaligned_le16(&device->buffer[1]);
+			input_report_abs(inputdev, ABS_X, val);
+
+			val = get_unaligned_le16(&device->buffer[3]);
+			input_report_abs(inputdev, ABS_Y, val);
+
+			/* Ditto for proximity bit */
+			val = device->buffer[5] & MASK_INRANGE ? 1 : 0;
+			input_report_abs(inputdev, ABS_DISTANCE, val);
+
+			/* Report 1 is an exception to how we handle buttons */
+			/* Buttons are an index, not a bitmask */
+			if (device->buffer[0] == 1) {
+
+				/*
+				 * Convert buttons, 5 bit index
+				 * Report value of index set as one,
+				 * the rest as 0
+				 */
+				val = device->buffer[5] & MASK_BUTTON;
+				dev_dbg(&device->intf->dev,
+					"======>>>>>>REPORT 1: val 0x%X(%d)\n",
+					val, val);
+
+				/*
+				 * We don't apply any meaning to the button
+				 * index, just report it
+				 */
+				input_event(inputdev, EV_MSC, MSC_SERIAL, val);
+			}
+			break;
+
+		case 7:
+			/* Menu blocks */
+			input_event(inputdev, EV_MSC, MSC_SCAN,
+				    device->buffer[1]);
+			break;
+		}
+	}
+
+	/* Other pid class */
+	if (inputdev->id.product == PID_400 ||
+	    inputdev->id.product == PID_401) {
+
+		/* Report 2 */
+		if (device->buffer[0] == 2) {
+			/* Menu blocks */
+			input_event(inputdev, EV_MSC, MSC_SCAN, device->buffer[1]);
+		}
+
+		/*  Report 1 */
+		if (device->buffer[0] == 1) {
+			char buttonbyte;
+
+			/*  IF X max > 64K, we still a bit from the y report */
+			if (device->max_X > 0x10000) {
+
+				val = (u16)(((u16)(device->buffer[2] << 8)) | (u8)device->buffer[1]);
+				val |= (u32)(((u8)device->buffer[3] & 0x1) << 16);
+
+				input_report_abs(inputdev, ABS_X, val);
+
+				le_buffer[0]  = (u8)((u8)(device->buffer[3]) >> 1);
+				le_buffer[0] |= (u8)((device->buffer[3] & 0x1) << 7);
+
+				le_buffer[1]  = (u8)(device->buffer[4] >> 1);
+				le_buffer[1] |= (u8)((device->buffer[5] & 0x1) << 7);
+
+				val = get_unaligned_le16(le_buffer);
+				input_report_abs(inputdev, ABS_Y, val);
+
+				/*
+				 * Shift the button byte right by one to
+				 * make it look like the standard report
+				 */
+				buttonbyte = device->buffer[5] >> 1;
+			} else {
+
+				val = get_unaligned_le16(&device->buffer[1]);
+				input_report_abs(inputdev, ABS_X, val);
+
+				val = get_unaligned_le16(&device->buffer[3]);
+				input_report_abs(inputdev, ABS_Y, val);
+
+				buttonbyte = device->buffer[5];
+			}
+
+			/* BUTTONS and PROXIMITY */
+			val = buttonbyte & MASK_INRANGE ? 1 : 0;
+			input_report_abs(inputdev, ABS_DISTANCE, val);
+
+			/* Convert buttons, only 4 bits possible */
+			val = buttonbyte & 0x0F;
+#ifdef USE_BUTTONS
+			for (i = 0; i < 5; i++)
+				input_report_key(inputdev, BTN_DIGI + i, val & (1 << i));
+#else
+			/* We don't apply any meaning to the bitmask, just report */
+			input_event(inputdev, EV_MSC, MSC_SERIAL, val);
+#endif
+
+			/* TRANSDUCER */
+			input_report_abs(inputdev, ABS_MISC, device->buffer[6]);
+		}
+	}
+
+	/* Everybody gets report ID's */
+	input_event(inputdev, EV_MSC, MSC_RAW,  device->buffer[0]);
+
+	/* Sync it up */
+	input_sync(inputdev);
+
+ resubmit:
+	rc = usb_submit_urb(urbinfo, GFP_ATOMIC);
+	if (rc != 0)
+		dev_err(&device->intf->dev,
+			"usb_submit_urb failed rc=0x%x\n", rc);
+}
+
+/*
+ *  The probe routine.  This is called when the kernel find the matching USB
+ *   vendor/product.  We do the following:
+ *
+ *    - Allocate mem for a local structure to manage the device
+ *    - Request a HID Report Descriptor from the device and parse it to
+ *      find out the device parameters
+ *    - Create an input device and assign it attributes
+ *   - Allocate an URB so the device can talk to us when the input
+ *      queue is open
+ */
+static int gtco_probe(struct usb_interface *usbinterface,
+		      const struct usb_device_id *id)
+{
+
+	struct gtco             *gtco;
+	struct input_dev        *input_dev;
+	struct hid_descriptor   *hid_desc;
+	char                    *report;
+	int                     result = 0, retry;
+	int			error;
+	struct usb_endpoint_descriptor *endpoint;
+	struct usb_device	*udev = interface_to_usbdev(usbinterface);
+
+	/* Allocate memory for device structure */
+	gtco = kzalloc(sizeof(struct gtco), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!gtco || !input_dev) {
+		dev_err(&usbinterface->dev, "No more memory\n");
+		error = -ENOMEM;
+		goto err_free_devs;
+	}
+
+	/* Set pointer to the input device */
+	gtco->inputdevice = input_dev;
+
+	/* Save interface information */
+	gtco->intf = usbinterface;
+
+	/* Allocate some data for incoming reports */
+	gtco->buffer = usb_alloc_coherent(udev, REPORT_MAX_SIZE,
+					  GFP_KERNEL, &gtco->buf_dma);
+	if (!gtco->buffer) {
+		dev_err(&usbinterface->dev, "No more memory for us buffers\n");
+		error = -ENOMEM;
+		goto err_free_devs;
+	}
+
+	/* Allocate URB for reports */
+	gtco->urbinfo = usb_alloc_urb(0, GFP_KERNEL);
+	if (!gtco->urbinfo) {
+		dev_err(&usbinterface->dev, "Failed to allocate URB\n");
+		error = -ENOMEM;
+		goto err_free_buf;
+	}
+
+	/* Sanity check that a device has an endpoint */
+	if (usbinterface->cur_altsetting->desc.bNumEndpoints < 1) {
+		dev_err(&usbinterface->dev,
+			"Invalid number of endpoints\n");
+		error = -EINVAL;
+		goto err_free_urb;
+	}
+
+	endpoint = &usbinterface->cur_altsetting->endpoint[0].desc;
+
+	/* Some debug */
+	dev_dbg(&usbinterface->dev, "gtco # interfaces: %d\n", usbinterface->num_altsetting);
+	dev_dbg(&usbinterface->dev, "num endpoints:     %d\n", usbinterface->cur_altsetting->desc.bNumEndpoints);
+	dev_dbg(&usbinterface->dev, "interface class:   %d\n", usbinterface->cur_altsetting->desc.bInterfaceClass);
+	dev_dbg(&usbinterface->dev, "endpoint: attribute:0x%x type:0x%x\n", endpoint->bmAttributes, endpoint->bDescriptorType);
+	if (usb_endpoint_xfer_int(endpoint))
+		dev_dbg(&usbinterface->dev, "endpoint: we have interrupt endpoint\n");
+
+	dev_dbg(&usbinterface->dev, "interface extra len:%d\n",
+		usbinterface->cur_altsetting->extralen);
+
+	/*
+	 * Find the HID descriptor so we can find out the size of the
+	 * HID report descriptor
+	 */
+	if (usb_get_extra_descriptor(usbinterface->cur_altsetting,
+				     HID_DEVICE_TYPE, &hid_desc) != 0) {
+		dev_err(&usbinterface->dev,
+			"Can't retrieve exta USB descriptor to get hid report descriptor length\n");
+		error = -EIO;
+		goto err_free_urb;
+	}
+
+	dev_dbg(&usbinterface->dev,
+		"Extra descriptor success: type:%d  len:%d\n",
+		hid_desc->bDescriptorType,  hid_desc->wDescriptorLength);
+
+	report = kzalloc(le16_to_cpu(hid_desc->wDescriptorLength), GFP_KERNEL);
+	if (!report) {
+		dev_err(&usbinterface->dev, "No more memory for report\n");
+		error = -ENOMEM;
+		goto err_free_urb;
+	}
+
+	/* Couple of tries to get reply */
+	for (retry = 0; retry < 3; retry++) {
+		result = usb_control_msg(udev,
+					 usb_rcvctrlpipe(udev, 0),
+					 USB_REQ_GET_DESCRIPTOR,
+					 USB_RECIP_INTERFACE | USB_DIR_IN,
+					 REPORT_DEVICE_TYPE << 8,
+					 0, /* interface */
+					 report,
+					 le16_to_cpu(hid_desc->wDescriptorLength),
+					 5000); /* 5 secs */
+
+		dev_dbg(&usbinterface->dev, "usb_control_msg result: %d\n", result);
+		if (result == le16_to_cpu(hid_desc->wDescriptorLength)) {
+			parse_hid_report_descriptor(gtco, report, result);
+			break;
+		}
+	}
+
+	kfree(report);
+
+	/* If we didn't get the report, fail */
+	if (result != le16_to_cpu(hid_desc->wDescriptorLength)) {
+		dev_err(&usbinterface->dev,
+			"Failed to get HID Report Descriptor of size: %d\n",
+			hid_desc->wDescriptorLength);
+		error = -EIO;
+		goto err_free_urb;
+	}
+
+	/* Create a device file node */
+	usb_make_path(udev, gtco->usbpath, sizeof(gtco->usbpath));
+	strlcat(gtco->usbpath, "/input0", sizeof(gtco->usbpath));
+
+	/* Set Input device functions */
+	input_dev->open = gtco_input_open;
+	input_dev->close = gtco_input_close;
+
+	/* Set input device information */
+	input_dev->name = "GTCO_CalComp";
+	input_dev->phys = gtco->usbpath;
+
+	input_set_drvdata(input_dev, gtco);
+
+	/* Now set up all the input device capabilities */
+	gtco_setup_caps(input_dev);
+
+	/* Set input device required ID information */
+	usb_to_input_id(udev, &input_dev->id);
+	input_dev->dev.parent = &usbinterface->dev;
+
+	/* Setup the URB, it will be posted later on open of input device */
+	usb_fill_int_urb(gtco->urbinfo,
+			 udev,
+			 usb_rcvintpipe(udev,
+					endpoint->bEndpointAddress),
+			 gtco->buffer,
+			 REPORT_MAX_SIZE,
+			 gtco_urb_callback,
+			 gtco,
+			 endpoint->bInterval);
+
+	gtco->urbinfo->transfer_dma = gtco->buf_dma;
+	gtco->urbinfo->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	/* Save gtco pointer in USB interface gtco */
+	usb_set_intfdata(usbinterface, gtco);
+
+	/* All done, now register the input device */
+	error = input_register_device(input_dev);
+	if (error)
+		goto err_free_urb;
+
+	return 0;
+
+ err_free_urb:
+	usb_free_urb(gtco->urbinfo);
+ err_free_buf:
+	usb_free_coherent(udev, REPORT_MAX_SIZE,
+			  gtco->buffer, gtco->buf_dma);
+ err_free_devs:
+	input_free_device(input_dev);
+	kfree(gtco);
+	return error;
+}
+
+/*
+ *  This function is a standard USB function called when the USB device
+ *  is disconnected.  We will get rid of the URV, de-register the input
+ *  device, and free up allocated memory
+ */
+static void gtco_disconnect(struct usb_interface *interface)
+{
+	/* Grab private device ptr */
+	struct gtco *gtco = usb_get_intfdata(interface);
+	struct usb_device *udev = interface_to_usbdev(interface);
+
+	/* Now reverse all the registration stuff */
+	if (gtco) {
+		input_unregister_device(gtco->inputdevice);
+		usb_kill_urb(gtco->urbinfo);
+		usb_free_urb(gtco->urbinfo);
+		usb_free_coherent(udev, REPORT_MAX_SIZE,
+				  gtco->buffer, gtco->buf_dma);
+		kfree(gtco);
+	}
+
+	dev_info(&interface->dev, "gtco driver disconnected\n");
+}
+
+/*   STANDARD MODULE LOAD ROUTINES  */
+
+static struct usb_driver gtco_driverinfo_table = {
+	.name		= "gtco",
+	.id_table	= gtco_usbid_table,
+	.probe		= gtco_probe,
+	.disconnect	= gtco_disconnect,
+};
+
+module_usb_driver(gtco_driverinfo_table);
+
+MODULE_DESCRIPTION("GTCO digitizer USB driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/tablet/hanwang.c b/drivers/input/tablet/hanwang.c
new file mode 100644
index 000000000..6d58443bb
--- /dev/null
+++ b/drivers/input/tablet/hanwang.c
@@ -0,0 +1,446 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  USB Hanwang tablet support
+ *
+ *  Copyright (c) 2010 Xing Wei <weixing@hanwang.com.cn>
+ */
+
+/*
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+
+MODULE_AUTHOR("Xing Wei <weixing@hanwang.com.cn>");
+MODULE_DESCRIPTION("USB Hanwang tablet driver");
+MODULE_LICENSE("GPL");
+
+#define USB_VENDOR_ID_HANWANG		0x0b57
+#define HANWANG_TABLET_INT_CLASS	0x0003
+#define HANWANG_TABLET_INT_SUB_CLASS	0x0001
+#define HANWANG_TABLET_INT_PROTOCOL	0x0002
+
+#define ART_MASTER_PKGLEN_MAX	10
+
+/* device IDs */
+#define STYLUS_DEVICE_ID	0x02
+#define TOUCH_DEVICE_ID		0x03
+#define CURSOR_DEVICE_ID	0x06
+#define ERASER_DEVICE_ID	0x0A
+#define PAD_DEVICE_ID		0x0F
+
+/* match vendor and interface info  */
+#define HANWANG_TABLET_DEVICE(vend, cl, sc, pr) \
+	.match_flags = USB_DEVICE_ID_MATCH_VENDOR \
+		| USB_DEVICE_ID_MATCH_INT_INFO, \
+	.idVendor = (vend), \
+	.bInterfaceClass = (cl), \
+	.bInterfaceSubClass = (sc), \
+	.bInterfaceProtocol = (pr)
+
+enum hanwang_tablet_type {
+	HANWANG_ART_MASTER_III,
+	HANWANG_ART_MASTER_HD,
+	HANWANG_ART_MASTER_II,
+};
+
+struct hanwang {
+	unsigned char *data;
+	dma_addr_t data_dma;
+	struct input_dev *dev;
+	struct usb_device *usbdev;
+	struct urb *irq;
+	const struct hanwang_features *features;
+	unsigned int current_tool;
+	unsigned int current_id;
+	char name[64];
+	char phys[32];
+};
+
+struct hanwang_features {
+	unsigned short pid;
+	char *name;
+	enum hanwang_tablet_type type;
+	int pkg_len;
+	int max_x;
+	int max_y;
+	int max_tilt_x;
+	int max_tilt_y;
+	int max_pressure;
+};
+
+static const struct hanwang_features features_array[] = {
+	{ 0x8528, "Hanwang Art Master III 0906", HANWANG_ART_MASTER_III,
+	  ART_MASTER_PKGLEN_MAX, 0x5757, 0x3692, 0x3f, 0x7f, 2048 },
+	{ 0x8529, "Hanwang Art Master III 0604", HANWANG_ART_MASTER_III,
+	  ART_MASTER_PKGLEN_MAX, 0x3d84, 0x2672, 0x3f, 0x7f, 2048 },
+	{ 0x852a, "Hanwang Art Master III 1308", HANWANG_ART_MASTER_III,
+	  ART_MASTER_PKGLEN_MAX, 0x7f00, 0x4f60, 0x3f, 0x7f, 2048 },
+	{ 0x8401, "Hanwang Art Master HD 5012", HANWANG_ART_MASTER_HD,
+	  ART_MASTER_PKGLEN_MAX, 0x678e, 0x4150, 0x3f, 0x7f, 1024 },
+	{ 0x8503, "Hanwang Art Master II", HANWANG_ART_MASTER_II,
+	  ART_MASTER_PKGLEN_MAX, 0x27de, 0x1cfe, 0x3f, 0x7f, 1024 },
+};
+
+static const int hw_eventtypes[] = {
+	EV_KEY, EV_ABS, EV_MSC,
+};
+
+static const int hw_absevents[] = {
+	ABS_X, ABS_Y, ABS_TILT_X, ABS_TILT_Y, ABS_WHEEL,
+	ABS_RX, ABS_RY, ABS_PRESSURE, ABS_MISC,
+};
+
+static const int hw_btnevents[] = {
+	BTN_STYLUS, BTN_STYLUS2, BTN_TOOL_PEN, BTN_TOOL_RUBBER,
+	BTN_TOOL_MOUSE, BTN_TOOL_FINGER,
+	BTN_0, BTN_1, BTN_2, BTN_3, BTN_4, BTN_5, BTN_6, BTN_7, BTN_8,
+};
+
+static const int hw_mscevents[] = {
+	MSC_SERIAL,
+};
+
+static void hanwang_parse_packet(struct hanwang *hanwang)
+{
+	unsigned char *data = hanwang->data;
+	struct input_dev *input_dev = hanwang->dev;
+	struct usb_device *dev = hanwang->usbdev;
+	enum hanwang_tablet_type type = hanwang->features->type;
+	int i;
+	u16 p;
+
+	if (type == HANWANG_ART_MASTER_II) {
+		hanwang->current_tool = BTN_TOOL_PEN;
+		hanwang->current_id = STYLUS_DEVICE_ID;
+	}
+
+	switch (data[0]) {
+	case 0x02:	/* data packet */
+		switch (data[1]) {
+		case 0x80:	/* tool prox out */
+			if (type != HANWANG_ART_MASTER_II) {
+				hanwang->current_id = 0;
+				input_report_key(input_dev,
+						 hanwang->current_tool, 0);
+			}
+			break;
+
+		case 0x00:	/* artmaster ii pen leave */
+			if (type == HANWANG_ART_MASTER_II) {
+				hanwang->current_id = 0;
+				input_report_key(input_dev,
+						 hanwang->current_tool, 0);
+			}
+			break;
+
+		case 0xc2:	/* first time tool prox in */
+			switch (data[3] & 0xf0) {
+			case 0x20:	/* art_master III */
+			case 0x30:	/* art_master_HD */
+				hanwang->current_id = STYLUS_DEVICE_ID;
+				hanwang->current_tool = BTN_TOOL_PEN;
+				input_report_key(input_dev, BTN_TOOL_PEN, 1);
+				break;
+			case 0xa0:	/* art_master III */
+			case 0xb0:	/* art_master_HD */
+				hanwang->current_id = ERASER_DEVICE_ID;
+				hanwang->current_tool = BTN_TOOL_RUBBER;
+				input_report_key(input_dev, BTN_TOOL_RUBBER, 1);
+				break;
+			default:
+				hanwang->current_id = 0;
+				dev_dbg(&dev->dev,
+					"unknown tablet tool %02x\n", data[0]);
+				break;
+			}
+			break;
+
+		default:	/* tool data packet */
+			switch (type) {
+			case HANWANG_ART_MASTER_III:
+				p = (data[6] << 3) |
+				    ((data[7] & 0xc0) >> 5) |
+				    (data[1] & 0x01);
+				break;
+
+			case HANWANG_ART_MASTER_HD:
+			case HANWANG_ART_MASTER_II:
+				p = (data[7] >> 6) | (data[6] << 2);
+				break;
+
+			default:
+				p = 0;
+				break;
+			}
+
+			input_report_abs(input_dev, ABS_X,
+					 be16_to_cpup((__be16 *)&data[2]));
+			input_report_abs(input_dev, ABS_Y,
+					 be16_to_cpup((__be16 *)&data[4]));
+			input_report_abs(input_dev, ABS_PRESSURE, p);
+			input_report_abs(input_dev, ABS_TILT_X, data[7] & 0x3f);
+			input_report_abs(input_dev, ABS_TILT_Y, data[8] & 0x7f);
+			input_report_key(input_dev, BTN_STYLUS, data[1] & 0x02);
+
+			if (type != HANWANG_ART_MASTER_II)
+				input_report_key(input_dev, BTN_STYLUS2,
+						 data[1] & 0x04);
+			else
+				input_report_key(input_dev, BTN_TOOL_PEN, 1);
+
+			break;
+		}
+
+		input_report_abs(input_dev, ABS_MISC, hanwang->current_id);
+		input_event(input_dev, EV_MSC, MSC_SERIAL,
+				hanwang->features->pid);
+		break;
+
+	case 0x0c:
+		/* roll wheel */
+		hanwang->current_id = PAD_DEVICE_ID;
+
+		switch (type) {
+		case HANWANG_ART_MASTER_III:
+			input_report_key(input_dev, BTN_TOOL_FINGER,
+					 data[1] || data[2] || data[3]);
+			input_report_abs(input_dev, ABS_WHEEL, data[1]);
+			input_report_key(input_dev, BTN_0, data[2]);
+			for (i = 0; i < 8; i++)
+				input_report_key(input_dev,
+					 BTN_1 + i, data[3] & (1 << i));
+			break;
+
+		case HANWANG_ART_MASTER_HD:
+			input_report_key(input_dev, BTN_TOOL_FINGER, data[1] ||
+					data[2] || data[3] || data[4] ||
+					data[5] || data[6]);
+			input_report_abs(input_dev, ABS_RX,
+					((data[1] & 0x1f) << 8) | data[2]);
+			input_report_abs(input_dev, ABS_RY,
+					((data[3] & 0x1f) << 8) | data[4]);
+			input_report_key(input_dev, BTN_0, data[5] & 0x01);
+			for (i = 0; i < 4; i++) {
+				input_report_key(input_dev,
+					 BTN_1 + i, data[5] & (1 << i));
+				input_report_key(input_dev,
+					 BTN_5 + i, data[6] & (1 << i));
+			}
+			break;
+
+		case HANWANG_ART_MASTER_II:
+			dev_dbg(&dev->dev, "error packet  %02x\n", data[0]);
+			return;
+		}
+
+		input_report_abs(input_dev, ABS_MISC, hanwang->current_id);
+		input_event(input_dev, EV_MSC, MSC_SERIAL, 0xffffffff);
+		break;
+
+	default:
+		dev_dbg(&dev->dev, "error packet  %02x\n", data[0]);
+		break;
+	}
+
+	input_sync(input_dev);
+}
+
+static void hanwang_irq(struct urb *urb)
+{
+	struct hanwang *hanwang = urb->context;
+	struct usb_device *dev = hanwang->usbdev;
+	int retval;
+
+	switch (urb->status) {
+	case 0:
+		/* success */;
+		hanwang_parse_packet(hanwang);
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_err(&dev->dev, "%s - urb shutting down with status: %d",
+			__func__, urb->status);
+		return;
+	default:
+		dev_err(&dev->dev, "%s - nonzero urb status received: %d",
+			__func__, urb->status);
+		break;
+	}
+
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		dev_err(&dev->dev, "%s - usb_submit_urb failed with result %d",
+			__func__, retval);
+}
+
+static int hanwang_open(struct input_dev *dev)
+{
+	struct hanwang *hanwang = input_get_drvdata(dev);
+
+	hanwang->irq->dev = hanwang->usbdev;
+	if (usb_submit_urb(hanwang->irq, GFP_KERNEL))
+		return -EIO;
+
+	return 0;
+}
+
+static void hanwang_close(struct input_dev *dev)
+{
+	struct hanwang *hanwang = input_get_drvdata(dev);
+
+	usb_kill_urb(hanwang->irq);
+}
+
+static bool get_features(struct usb_device *dev, struct hanwang *hanwang)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(features_array); i++) {
+		if (le16_to_cpu(dev->descriptor.idProduct) ==
+				features_array[i].pid) {
+			hanwang->features = &features_array[i];
+			return true;
+		}
+	}
+
+	return false;
+}
+
+
+static int hanwang_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_endpoint_descriptor *endpoint;
+	struct hanwang *hanwang;
+	struct input_dev *input_dev;
+	int error;
+	int i;
+
+	if (intf->cur_altsetting->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
+	hanwang = kzalloc(sizeof(struct hanwang), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!hanwang || !input_dev) {
+		error = -ENOMEM;
+		goto fail1;
+	}
+
+	if (!get_features(dev, hanwang)) {
+		error = -ENXIO;
+		goto fail1;
+	}
+
+	hanwang->data = usb_alloc_coherent(dev, hanwang->features->pkg_len,
+					GFP_KERNEL, &hanwang->data_dma);
+	if (!hanwang->data) {
+		error = -ENOMEM;
+		goto fail1;
+	}
+
+	hanwang->irq = usb_alloc_urb(0, GFP_KERNEL);
+	if (!hanwang->irq) {
+		error = -ENOMEM;
+		goto fail2;
+	}
+
+	hanwang->usbdev = dev;
+	hanwang->dev = input_dev;
+
+	usb_make_path(dev, hanwang->phys, sizeof(hanwang->phys));
+	strlcat(hanwang->phys, "/input0", sizeof(hanwang->phys));
+
+	strlcpy(hanwang->name, hanwang->features->name, sizeof(hanwang->name));
+	input_dev->name = hanwang->name;
+	input_dev->phys = hanwang->phys;
+	usb_to_input_id(dev, &input_dev->id);
+	input_dev->dev.parent = &intf->dev;
+
+	input_set_drvdata(input_dev, hanwang);
+
+	input_dev->open = hanwang_open;
+	input_dev->close = hanwang_close;
+
+	for (i = 0; i < ARRAY_SIZE(hw_eventtypes); ++i)
+		__set_bit(hw_eventtypes[i], input_dev->evbit);
+
+	for (i = 0; i < ARRAY_SIZE(hw_absevents); ++i)
+		__set_bit(hw_absevents[i], input_dev->absbit);
+
+	for (i = 0; i < ARRAY_SIZE(hw_btnevents); ++i)
+		__set_bit(hw_btnevents[i], input_dev->keybit);
+
+	for (i = 0; i < ARRAY_SIZE(hw_mscevents); ++i)
+		__set_bit(hw_mscevents[i], input_dev->mscbit);
+
+	input_set_abs_params(input_dev, ABS_X,
+			     0, hanwang->features->max_x, 4, 0);
+	input_set_abs_params(input_dev, ABS_Y,
+			     0, hanwang->features->max_y, 4, 0);
+	input_set_abs_params(input_dev, ABS_TILT_X,
+			     0, hanwang->features->max_tilt_x, 0, 0);
+	input_set_abs_params(input_dev, ABS_TILT_Y,
+			     0, hanwang->features->max_tilt_y, 0, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE,
+			     0, hanwang->features->max_pressure, 0, 0);
+
+	endpoint = &intf->cur_altsetting->endpoint[0].desc;
+	usb_fill_int_urb(hanwang->irq, dev,
+			usb_rcvintpipe(dev, endpoint->bEndpointAddress),
+			hanwang->data, hanwang->features->pkg_len,
+			hanwang_irq, hanwang, endpoint->bInterval);
+	hanwang->irq->transfer_dma = hanwang->data_dma;
+	hanwang->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	error = input_register_device(hanwang->dev);
+	if (error)
+		goto fail3;
+
+	usb_set_intfdata(intf, hanwang);
+
+	return 0;
+
+ fail3:	usb_free_urb(hanwang->irq);
+ fail2:	usb_free_coherent(dev, hanwang->features->pkg_len,
+			hanwang->data, hanwang->data_dma);
+ fail1:	input_free_device(input_dev);
+	kfree(hanwang);
+	return error;
+
+}
+
+static void hanwang_disconnect(struct usb_interface *intf)
+{
+	struct hanwang *hanwang = usb_get_intfdata(intf);
+
+	input_unregister_device(hanwang->dev);
+	usb_free_urb(hanwang->irq);
+	usb_free_coherent(interface_to_usbdev(intf),
+			hanwang->features->pkg_len, hanwang->data,
+			hanwang->data_dma);
+	kfree(hanwang);
+	usb_set_intfdata(intf, NULL);
+}
+
+static const struct usb_device_id hanwang_ids[] = {
+	{ HANWANG_TABLET_DEVICE(USB_VENDOR_ID_HANWANG, HANWANG_TABLET_INT_CLASS,
+		HANWANG_TABLET_INT_SUB_CLASS, HANWANG_TABLET_INT_PROTOCOL) },
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, hanwang_ids);
+
+static struct usb_driver hanwang_driver = {
+	.name		= "hanwang",
+	.probe		= hanwang_probe,
+	.disconnect	= hanwang_disconnect,
+	.id_table	= hanwang_ids,
+};
+
+module_usb_driver(hanwang_driver);
diff --git a/drivers/input/tablet/kbtab.c b/drivers/input/tablet/kbtab.c
new file mode 100644
index 000000000..aa577898e
--- /dev/null
+++ b/drivers/input/tablet/kbtab.c
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+#include <asm/unaligned.h>
+
+/*
+ * Pressure-threshold modules param code from Alex Perry <alex.perry@ieee.org>
+ */
+
+MODULE_AUTHOR("Josh Myer <josh@joshisanerd.com>");
+MODULE_DESCRIPTION("USB KB Gear JamStudio Tablet driver");
+MODULE_LICENSE("GPL");
+
+#define USB_VENDOR_ID_KBGEAR	0x084e
+
+static int kb_pressure_click = 0x10;
+module_param(kb_pressure_click, int, 0);
+MODULE_PARM_DESC(kb_pressure_click, "pressure threshold for clicks");
+
+struct kbtab {
+	unsigned char *data;
+	dma_addr_t data_dma;
+	struct input_dev *dev;
+	struct usb_interface *intf;
+	struct urb *irq;
+	char phys[32];
+};
+
+static void kbtab_irq(struct urb *urb)
+{
+	struct kbtab *kbtab = urb->context;
+	unsigned char *data = kbtab->data;
+	struct input_dev *dev = kbtab->dev;
+	int pressure;
+	int retval;
+
+	switch (urb->status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_dbg(&kbtab->intf->dev,
+			"%s - urb shutting down with status: %d\n",
+			__func__, urb->status);
+		return;
+	default:
+		dev_dbg(&kbtab->intf->dev,
+			"%s - nonzero urb status received: %d\n",
+			__func__, urb->status);
+		goto exit;
+	}
+
+
+	input_report_key(dev, BTN_TOOL_PEN, 1);
+
+	input_report_abs(dev, ABS_X, get_unaligned_le16(&data[1]));
+	input_report_abs(dev, ABS_Y, get_unaligned_le16(&data[3]));
+
+	/*input_report_key(dev, BTN_TOUCH , data[0] & 0x01);*/
+	input_report_key(dev, BTN_RIGHT, data[0] & 0x02);
+
+	pressure = data[5];
+	if (kb_pressure_click == -1)
+		input_report_abs(dev, ABS_PRESSURE, pressure);
+	else
+		input_report_key(dev, BTN_LEFT, pressure > kb_pressure_click ? 1 : 0);
+
+	input_sync(dev);
+
+ exit:
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		dev_err(&kbtab->intf->dev,
+			"%s - usb_submit_urb failed with result %d\n",
+			__func__, retval);
+}
+
+static const struct usb_device_id kbtab_ids[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_KBGEAR, 0x1001), .driver_info = 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, kbtab_ids);
+
+static int kbtab_open(struct input_dev *dev)
+{
+	struct kbtab *kbtab = input_get_drvdata(dev);
+	struct usb_device *udev = interface_to_usbdev(kbtab->intf);
+
+	kbtab->irq->dev = udev;
+	if (usb_submit_urb(kbtab->irq, GFP_KERNEL))
+		return -EIO;
+
+	return 0;
+}
+
+static void kbtab_close(struct input_dev *dev)
+{
+	struct kbtab *kbtab = input_get_drvdata(dev);
+
+	usb_kill_urb(kbtab->irq);
+}
+
+static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_endpoint_descriptor *endpoint;
+	struct kbtab *kbtab;
+	struct input_dev *input_dev;
+	int error = -ENOMEM;
+
+	if (intf->cur_altsetting->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
+	endpoint = &intf->cur_altsetting->endpoint[0].desc;
+	if (!usb_endpoint_is_int_in(endpoint))
+		return -ENODEV;
+
+	kbtab = kzalloc(sizeof(struct kbtab), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!kbtab || !input_dev)
+		goto fail1;
+
+	kbtab->data = usb_alloc_coherent(dev, 8, GFP_KERNEL, &kbtab->data_dma);
+	if (!kbtab->data)
+		goto fail1;
+
+	kbtab->irq = usb_alloc_urb(0, GFP_KERNEL);
+	if (!kbtab->irq)
+		goto fail2;
+
+	kbtab->intf = intf;
+	kbtab->dev = input_dev;
+
+	usb_make_path(dev, kbtab->phys, sizeof(kbtab->phys));
+	strlcat(kbtab->phys, "/input0", sizeof(kbtab->phys));
+
+	input_dev->name = "KB Gear Tablet";
+	input_dev->phys = kbtab->phys;
+	usb_to_input_id(dev, &input_dev->id);
+	input_dev->dev.parent = &intf->dev;
+
+	input_set_drvdata(input_dev, kbtab);
+
+	input_dev->open = kbtab_open;
+	input_dev->close = kbtab_close;
+
+	input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_LEFT)] |=
+		BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
+	input_dev->keybit[BIT_WORD(BTN_DIGI)] |=
+		BIT_MASK(BTN_TOOL_PEN) | BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(input_dev, ABS_X, 0, 0x2000, 4, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, 0x1750, 4, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xff, 0, 0);
+
+	usb_fill_int_urb(kbtab->irq, dev,
+			 usb_rcvintpipe(dev, endpoint->bEndpointAddress),
+			 kbtab->data, 8,
+			 kbtab_irq, kbtab, endpoint->bInterval);
+	kbtab->irq->transfer_dma = kbtab->data_dma;
+	kbtab->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	error = input_register_device(kbtab->dev);
+	if (error)
+		goto fail3;
+
+	usb_set_intfdata(intf, kbtab);
+
+	return 0;
+
+ fail3:	usb_free_urb(kbtab->irq);
+ fail2:	usb_free_coherent(dev, 8, kbtab->data, kbtab->data_dma);
+ fail1:	input_free_device(input_dev);
+	kfree(kbtab);
+	return error;
+}
+
+static void kbtab_disconnect(struct usb_interface *intf)
+{
+	struct kbtab *kbtab = usb_get_intfdata(intf);
+	struct usb_device *udev = interface_to_usbdev(intf);
+
+	usb_set_intfdata(intf, NULL);
+
+	input_unregister_device(kbtab->dev);
+	usb_free_urb(kbtab->irq);
+	usb_free_coherent(udev, 8, kbtab->data, kbtab->data_dma);
+	kfree(kbtab);
+}
+
+static struct usb_driver kbtab_driver = {
+	.name =		"kbtab",
+	.probe =	kbtab_probe,
+	.disconnect =	kbtab_disconnect,
+	.id_table =	kbtab_ids,
+};
+
+module_usb_driver(kbtab_driver);
diff --git a/drivers/input/tablet/pegasus_notetaker.c b/drivers/input/tablet/pegasus_notetaker.c
new file mode 100644
index 000000000..749edbdb7
--- /dev/null
+++ b/drivers/input/tablet/pegasus_notetaker.c
@@ -0,0 +1,468 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Pegasus Mobile Notetaker Pen input tablet driver
+ *
+ * Copyright (c) 2016 Martin Kepplinger <martink@posteo.de>
+ */
+
+/*
+ * request packet (control endpoint):
+ * |-------------------------------------|
+ * | Report ID | Nr of bytes | command   |
+ * | (1 byte)  | (1 byte)    | (n bytes) |
+ * |-------------------------------------|
+ * | 0x02      | n           |           |
+ * |-------------------------------------|
+ *
+ * data packet after set xy mode command, 0x80 0xb5 0x02 0x01
+ * and pen is in range:
+ *
+ * byte	byte name		value (bits)
+ * --------------------------------------------
+ * 0	status			0 1 0 0 0 0 X X
+ * 1	color			0 0 0 0 H 0 S T
+ * 2	X low
+ * 3	X high
+ * 4	Y low
+ * 5	Y high
+ *
+ * X X	battery state:
+ *	no state reported	0x00
+ *	battery low		0x01
+ *	battery good		0x02
+ *
+ * H	Hovering
+ * S	Switch 1 (pen button)
+ * T	Tip
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/usb/input.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/mutex.h>
+
+/* USB HID defines */
+#define USB_REQ_GET_REPORT		0x01
+#define USB_REQ_SET_REPORT		0x09
+
+#define USB_VENDOR_ID_PEGASUSTECH	0x0e20
+#define USB_DEVICE_ID_PEGASUS_NOTETAKER_EN100	0x0101
+
+/* device specific defines */
+#define NOTETAKER_REPORT_ID		0x02
+#define NOTETAKER_SET_CMD		0x80
+#define NOTETAKER_SET_MODE		0xb5
+
+#define NOTETAKER_LED_MOUSE		0x02
+#define PEN_MODE_XY			0x01
+
+#define SPECIAL_COMMAND			0x80
+#define BUTTON_PRESSED			0xb5
+#define COMMAND_VERSION			0xa9
+
+/* in xy data packet */
+#define BATTERY_NO_REPORT		0x40
+#define BATTERY_LOW			0x41
+#define BATTERY_GOOD			0x42
+#define PEN_BUTTON_PRESSED		BIT(1)
+#define PEN_TIP				BIT(0)
+
+struct pegasus {
+	unsigned char *data;
+	u8 data_len;
+	dma_addr_t data_dma;
+	struct input_dev *dev;
+	struct usb_device *usbdev;
+	struct usb_interface *intf;
+	struct urb *irq;
+
+	/* serialize access to open/suspend */
+	struct mutex pm_mutex;
+	bool is_open;
+
+	char name[128];
+	char phys[64];
+	struct work_struct init;
+};
+
+static int pegasus_control_msg(struct pegasus *pegasus, u8 *data, int len)
+{
+	const int sizeof_buf = len + 2;
+	int result;
+	int error;
+	u8 *cmd_buf;
+
+	cmd_buf = kmalloc(sizeof_buf, GFP_KERNEL);
+	if (!cmd_buf)
+		return -ENOMEM;
+
+	cmd_buf[0] = NOTETAKER_REPORT_ID;
+	cmd_buf[1] = len;
+	memcpy(cmd_buf + 2, data, len);
+
+	result = usb_control_msg(pegasus->usbdev,
+				 usb_sndctrlpipe(pegasus->usbdev, 0),
+				 USB_REQ_SET_REPORT,
+				 USB_TYPE_VENDOR | USB_DIR_OUT,
+				 0, 0, cmd_buf, sizeof_buf,
+				 USB_CTRL_SET_TIMEOUT);
+
+	kfree(cmd_buf);
+
+	if (unlikely(result != sizeof_buf)) {
+		error = result < 0 ? result : -EIO;
+		dev_err(&pegasus->usbdev->dev, "control msg error: %d\n",
+			error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int pegasus_set_mode(struct pegasus *pegasus, u8 mode, u8 led)
+{
+	u8 cmd[] = { NOTETAKER_SET_CMD, NOTETAKER_SET_MODE, led, mode };
+
+	return pegasus_control_msg(pegasus, cmd, sizeof(cmd));
+}
+
+static void pegasus_parse_packet(struct pegasus *pegasus)
+{
+	unsigned char *data = pegasus->data;
+	struct input_dev *dev = pegasus->dev;
+	u16 x, y;
+
+	switch (data[0]) {
+	case SPECIAL_COMMAND:
+		/* device button pressed */
+		if (data[1] == BUTTON_PRESSED)
+			schedule_work(&pegasus->init);
+
+		break;
+
+	/* xy data */
+	case BATTERY_LOW:
+		dev_warn_once(&dev->dev, "Pen battery low\n");
+		fallthrough;
+
+	case BATTERY_NO_REPORT:
+	case BATTERY_GOOD:
+		x = le16_to_cpup((__le16 *)&data[2]);
+		y = le16_to_cpup((__le16 *)&data[4]);
+
+		/* pen-up event */
+		if (x == 0 && y == 0)
+			break;
+
+		input_report_key(dev, BTN_TOUCH, data[1] & PEN_TIP);
+		input_report_key(dev, BTN_RIGHT, data[1] & PEN_BUTTON_PRESSED);
+		input_report_key(dev, BTN_TOOL_PEN, 1);
+		input_report_abs(dev, ABS_X, (s16)x);
+		input_report_abs(dev, ABS_Y, y);
+
+		input_sync(dev);
+		break;
+
+	default:
+		dev_warn_once(&pegasus->usbdev->dev,
+			      "unknown answer from device\n");
+	}
+}
+
+static void pegasus_irq(struct urb *urb)
+{
+	struct pegasus *pegasus = urb->context;
+	struct usb_device *dev = pegasus->usbdev;
+	int retval;
+
+	switch (urb->status) {
+	case 0:
+		pegasus_parse_packet(pegasus);
+		usb_mark_last_busy(pegasus->usbdev);
+		break;
+
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		dev_err(&dev->dev, "%s - urb shutting down with status: %d",
+			__func__, urb->status);
+		return;
+
+	default:
+		dev_err(&dev->dev, "%s - nonzero urb status received: %d",
+			__func__, urb->status);
+		break;
+	}
+
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		dev_err(&dev->dev, "%s - usb_submit_urb failed with result %d",
+			__func__, retval);
+}
+
+static void pegasus_init(struct work_struct *work)
+{
+	struct pegasus *pegasus = container_of(work, struct pegasus, init);
+	int error;
+
+	error = pegasus_set_mode(pegasus, PEN_MODE_XY, NOTETAKER_LED_MOUSE);
+	if (error)
+		dev_err(&pegasus->usbdev->dev, "pegasus_set_mode error: %d\n",
+			error);
+}
+
+static int pegasus_open(struct input_dev *dev)
+{
+	struct pegasus *pegasus = input_get_drvdata(dev);
+	int error;
+
+	error = usb_autopm_get_interface(pegasus->intf);
+	if (error)
+		return error;
+
+	mutex_lock(&pegasus->pm_mutex);
+	pegasus->irq->dev = pegasus->usbdev;
+	if (usb_submit_urb(pegasus->irq, GFP_KERNEL)) {
+		error = -EIO;
+		goto err_autopm_put;
+	}
+
+	error = pegasus_set_mode(pegasus, PEN_MODE_XY, NOTETAKER_LED_MOUSE);
+	if (error)
+		goto err_kill_urb;
+
+	pegasus->is_open = true;
+	mutex_unlock(&pegasus->pm_mutex);
+	return 0;
+
+err_kill_urb:
+	usb_kill_urb(pegasus->irq);
+	cancel_work_sync(&pegasus->init);
+err_autopm_put:
+	mutex_unlock(&pegasus->pm_mutex);
+	usb_autopm_put_interface(pegasus->intf);
+	return error;
+}
+
+static void pegasus_close(struct input_dev *dev)
+{
+	struct pegasus *pegasus = input_get_drvdata(dev);
+
+	mutex_lock(&pegasus->pm_mutex);
+	usb_kill_urb(pegasus->irq);
+	cancel_work_sync(&pegasus->init);
+	pegasus->is_open = false;
+	mutex_unlock(&pegasus->pm_mutex);
+
+	usb_autopm_put_interface(pegasus->intf);
+}
+
+static int pegasus_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_endpoint_descriptor *endpoint;
+	struct pegasus *pegasus;
+	struct input_dev *input_dev;
+	int error;
+	int pipe;
+
+	/* We control interface 0 */
+	if (intf->cur_altsetting->desc.bInterfaceNumber >= 1)
+		return -ENODEV;
+
+	/* Sanity check that the device has an endpoint */
+	if (intf->cur_altsetting->desc.bNumEndpoints < 1) {
+		dev_err(&intf->dev, "Invalid number of endpoints\n");
+		return -EINVAL;
+	}
+
+	endpoint = &intf->cur_altsetting->endpoint[0].desc;
+
+	pegasus = kzalloc(sizeof(*pegasus), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!pegasus || !input_dev) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	mutex_init(&pegasus->pm_mutex);
+
+	pegasus->usbdev = dev;
+	pegasus->dev = input_dev;
+	pegasus->intf = intf;
+
+	pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
+	pegasus->data_len = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
+
+	pegasus->data = usb_alloc_coherent(dev, pegasus->data_len, GFP_KERNEL,
+					   &pegasus->data_dma);
+	if (!pegasus->data) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	pegasus->irq = usb_alloc_urb(0, GFP_KERNEL);
+	if (!pegasus->irq) {
+		error = -ENOMEM;
+		goto err_free_dma;
+	}
+
+	usb_fill_int_urb(pegasus->irq, dev, pipe,
+			 pegasus->data, pegasus->data_len,
+			 pegasus_irq, pegasus, endpoint->bInterval);
+
+	pegasus->irq->transfer_dma = pegasus->data_dma;
+	pegasus->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	if (dev->manufacturer)
+		strlcpy(pegasus->name, dev->manufacturer,
+			sizeof(pegasus->name));
+
+	if (dev->product) {
+		if (dev->manufacturer)
+			strlcat(pegasus->name, " ", sizeof(pegasus->name));
+		strlcat(pegasus->name, dev->product, sizeof(pegasus->name));
+	}
+
+	if (!strlen(pegasus->name))
+		snprintf(pegasus->name, sizeof(pegasus->name),
+			 "USB Pegasus Device %04x:%04x",
+			 le16_to_cpu(dev->descriptor.idVendor),
+			 le16_to_cpu(dev->descriptor.idProduct));
+
+	usb_make_path(dev, pegasus->phys, sizeof(pegasus->phys));
+	strlcat(pegasus->phys, "/input0", sizeof(pegasus->phys));
+
+	INIT_WORK(&pegasus->init, pegasus_init);
+
+	usb_set_intfdata(intf, pegasus);
+
+	input_dev->name = pegasus->name;
+	input_dev->phys = pegasus->phys;
+	usb_to_input_id(dev, &input_dev->id);
+	input_dev->dev.parent = &intf->dev;
+
+	input_set_drvdata(input_dev, pegasus);
+
+	input_dev->open = pegasus_open;
+	input_dev->close = pegasus_close;
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+
+	__set_bit(ABS_X, input_dev->absbit);
+	__set_bit(ABS_Y, input_dev->absbit);
+
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+	__set_bit(BTN_RIGHT, input_dev->keybit);
+	__set_bit(BTN_TOOL_PEN, input_dev->keybit);
+
+	__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+	__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
+	input_set_abs_params(input_dev, ABS_X, -1500, 1500, 8, 0);
+	input_set_abs_params(input_dev, ABS_Y, 1600, 3000, 8, 0);
+
+	error = input_register_device(pegasus->dev);
+	if (error)
+		goto err_free_urb;
+
+	return 0;
+
+err_free_urb:
+	usb_free_urb(pegasus->irq);
+err_free_dma:
+	usb_free_coherent(dev, pegasus->data_len,
+			  pegasus->data, pegasus->data_dma);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(pegasus);
+	usb_set_intfdata(intf, NULL);
+
+	return error;
+}
+
+static void pegasus_disconnect(struct usb_interface *intf)
+{
+	struct pegasus *pegasus = usb_get_intfdata(intf);
+
+	input_unregister_device(pegasus->dev);
+
+	usb_free_urb(pegasus->irq);
+	usb_free_coherent(interface_to_usbdev(intf),
+			  pegasus->data_len, pegasus->data,
+			  pegasus->data_dma);
+
+	kfree(pegasus);
+	usb_set_intfdata(intf, NULL);
+}
+
+static int pegasus_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct pegasus *pegasus = usb_get_intfdata(intf);
+
+	mutex_lock(&pegasus->pm_mutex);
+	usb_kill_urb(pegasus->irq);
+	cancel_work_sync(&pegasus->init);
+	mutex_unlock(&pegasus->pm_mutex);
+
+	return 0;
+}
+
+static int pegasus_resume(struct usb_interface *intf)
+{
+	struct pegasus *pegasus = usb_get_intfdata(intf);
+	int retval = 0;
+
+	mutex_lock(&pegasus->pm_mutex);
+	if (pegasus->is_open && usb_submit_urb(pegasus->irq, GFP_NOIO) < 0)
+		retval = -EIO;
+	mutex_unlock(&pegasus->pm_mutex);
+
+	return retval;
+}
+
+static int pegasus_reset_resume(struct usb_interface *intf)
+{
+	struct pegasus *pegasus = usb_get_intfdata(intf);
+	int retval = 0;
+
+	mutex_lock(&pegasus->pm_mutex);
+	if (pegasus->is_open) {
+		retval = pegasus_set_mode(pegasus, PEN_MODE_XY,
+					  NOTETAKER_LED_MOUSE);
+		if (!retval && usb_submit_urb(pegasus->irq, GFP_NOIO) < 0)
+			retval = -EIO;
+	}
+	mutex_unlock(&pegasus->pm_mutex);
+
+	return retval;
+}
+
+static const struct usb_device_id pegasus_ids[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_PEGASUSTECH,
+		     USB_DEVICE_ID_PEGASUS_NOTETAKER_EN100) },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, pegasus_ids);
+
+static struct usb_driver pegasus_driver = {
+	.name		= "pegasus_notetaker",
+	.probe		= pegasus_probe,
+	.disconnect	= pegasus_disconnect,
+	.suspend	= pegasus_suspend,
+	.resume		= pegasus_resume,
+	.reset_resume	= pegasus_reset_resume,
+	.id_table	= pegasus_ids,
+	.supports_autosuspend = 1,
+};
+
+module_usb_driver(pegasus_driver);
+
+MODULE_AUTHOR("Martin Kepplinger <martink@posteo.de>");
+MODULE_DESCRIPTION("Pegasus Mobile Notetaker Pen tablet driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/tablet/wacom_serial4.c b/drivers/input/tablet/wacom_serial4.c
new file mode 100644
index 000000000..1cedb45ba
--- /dev/null
+++ b/drivers/input/tablet/wacom_serial4.c
@@ -0,0 +1,617 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Wacom protocol 4 serial tablet driver
+ *
+ * Copyright 2014      Hans de Goede <hdegoede@redhat.com>
+ * Copyright 2011-2012 Julian Squires <julian@cipht.net>
+ *
+ * Many thanks to Bill Seremetis, without whom PenPartner support
+ * would not have been possible. Thanks to Patrick Mahoney.
+ *
+ * This driver was developed with reference to much code written by others,
+ * particularly:
+ *  - elo, gunze drivers by Vojtech Pavlik <vojtech@ucw.cz>;
+ *  - wacom_w8001 driver by Jaya Kumar <jayakumar.lkml@gmail.com>;
+ *  - the USB wacom input driver, credited to many people
+ *    (see drivers/input/tablet/wacom.h);
+ *  - new and old versions of linuxwacom / xf86-input-wacom credited to
+ *    Frederic Lepied, France. <Lepied@XFree86.org> and
+ *    Ping Cheng, Wacom. <pingc@wacom.com>;
+ *  - and xf86wacom.c (a presumably ancient version of the linuxwacom code),
+ *    by Frederic Lepied and Raph Levien <raph@gtk.org>.
+ *
+ * To do:
+ *  - support pad buttons; (requires access to a model with pad buttons)
+ *  - support (protocol 4-style) tilt (requires access to a > 1.4 rom model)
+ */
+
+/*
+ * Wacom serial protocol 4 documentation taken from linuxwacom-0.9.9 code,
+ * protocol 4 uses 7 or 9 byte of data in the following format:
+ *
+ *	Byte 1
+ *	bit 7  Sync bit always 1
+ *	bit 6  Pointing device detected
+ *	bit 5  Cursor = 0 / Stylus = 1
+ *	bit 4  Reserved
+ *	bit 3  1 if a button on the pointing device has been pressed
+ *	bit 2  P0 (optional)
+ *	bit 1  X15
+ *	bit 0  X14
+ *
+ *	Byte 2
+ *	bit 7  Always 0
+ *	bits 6-0 = X13 - X7
+ *
+ *	Byte 3
+ *	bit 7  Always 0
+ *	bits 6-0 = X6 - X0
+ *
+ *	Byte 4
+ *	bit 7  Always 0
+ *	bit 6  B3
+ *	bit 5  B2
+ *	bit 4  B1
+ *	bit 3  B0
+ *	bit 2  P1 (optional)
+ *	bit 1  Y15
+ *	bit 0  Y14
+ *
+ *	Byte 5
+ *	bit 7  Always 0
+ *	bits 6-0 = Y13 - Y7
+ *
+ *	Byte 6
+ *	bit 7  Always 0
+ *	bits 6-0 = Y6 - Y0
+ *
+ *	Byte 7
+ *	bit 7 Always 0
+ *	bit 6  Sign of pressure data; or wheel-rel for cursor tool
+ *	bit 5  P7; or REL1 for cursor tool
+ *	bit 4  P6; or REL0 for cursor tool
+ *	bit 3  P5
+ *	bit 2  P4
+ *	bit 1  P3
+ *	bit 0  P2
+ *
+ *	byte 8 and 9 are optional and present only
+ *	in tilt mode.
+ *
+ *	Byte 8
+ *	bit 7 Always 0
+ *	bit 6 Sign of tilt X
+ *	bit 5  Xt6
+ *	bit 4  Xt5
+ *	bit 3  Xt4
+ *	bit 2  Xt3
+ *	bit 1  Xt2
+ *	bit 0  Xt1
+ *
+ *	Byte 9
+ *	bit 7 Always 0
+ *	bit 6 Sign of tilt Y
+ *	bit 5  Yt6
+ *	bit 4  Yt5
+ *	bit 3  Yt4
+ *	bit 2  Yt3
+ *	bit 1  Yt2
+ *	bit 0  Yt1
+ */
+
+#include <linux/completion.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/serio.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+MODULE_AUTHOR("Julian Squires <julian@cipht.net>, Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("Wacom protocol 4 serial tablet driver");
+MODULE_LICENSE("GPL");
+
+#define REQUEST_MODEL_AND_ROM_VERSION	"~#"
+#define REQUEST_MAX_COORDINATES		"~C\r"
+#define REQUEST_CONFIGURATION_STRING	"~R\r"
+#define REQUEST_RESET_TO_PROTOCOL_IV	"\r#"
+/*
+ * Note: sending "\r$\r" causes at least the Digitizer II to send
+ * packets in ASCII instead of binary.  "\r#" seems to undo that.
+ */
+
+#define COMMAND_START_SENDING_PACKETS		"ST\r"
+#define COMMAND_STOP_SENDING_PACKETS		"SP\r"
+#define COMMAND_MULTI_MODE_INPUT		"MU1\r"
+#define COMMAND_ORIGIN_IN_UPPER_LEFT		"OC1\r"
+#define COMMAND_ENABLE_ALL_MACRO_BUTTONS	"~M0\r"
+#define COMMAND_DISABLE_GROUP_1_MACRO_BUTTONS	"~M1\r"
+#define COMMAND_TRANSMIT_AT_MAX_RATE		"IT0\r"
+#define COMMAND_DISABLE_INCREMENTAL_MODE	"IN0\r"
+#define COMMAND_ENABLE_CONTINUOUS_MODE		"SR\r"
+#define COMMAND_ENABLE_PRESSURE_MODE		"PH1\r"
+#define COMMAND_Z_FILTER			"ZF1\r"
+
+/* Note that this is a protocol 4 packet without tilt information. */
+#define PACKET_LENGTH		7
+#define DATA_SIZE		32
+
+/* flags */
+#define F_COVERS_SCREEN		0x01
+#define F_HAS_STYLUS2		0x02
+#define F_HAS_SCROLLWHEEL	0x04
+
+/* device IDs */
+#define STYLUS_DEVICE_ID	0x02
+#define CURSOR_DEVICE_ID	0x06
+#define ERASER_DEVICE_ID	0x0A
+
+enum { STYLUS = 1, ERASER, CURSOR };
+
+static const struct {
+	int device_id;
+	int input_id;
+} tools[] = {
+	{ 0, 0 },
+	{ STYLUS_DEVICE_ID, BTN_TOOL_PEN },
+	{ ERASER_DEVICE_ID, BTN_TOOL_RUBBER },
+	{ CURSOR_DEVICE_ID, BTN_TOOL_MOUSE },
+};
+
+struct wacom {
+	struct input_dev *dev;
+	struct completion cmd_done;
+	int result;
+	u8 expect;
+	u8 eraser_mask;
+	unsigned int extra_z_bits;
+	unsigned int flags;
+	unsigned int res_x, res_y;
+	unsigned int max_x, max_y;
+	unsigned int tool;
+	unsigned int idx;
+	u8 data[DATA_SIZE];
+	char phys[32];
+};
+
+enum {
+	MODEL_CINTIQ		= 0x504C, /* PL */
+	MODEL_CINTIQ2		= 0x4454, /* DT */
+	MODEL_DIGITIZER_II	= 0x5544, /* UD */
+	MODEL_GRAPHIRE		= 0x4554, /* ET */
+	MODEL_PENPARTNER	= 0x4354, /* CT */
+	MODEL_ARTPAD_II		= 0x4B54, /* KT */
+};
+
+static void wacom_handle_model_response(struct wacom *wacom)
+{
+	int major_v, minor_v, r = 0;
+	char *p;
+
+	p = strrchr(wacom->data, 'V');
+	if (p)
+		r = sscanf(p + 1, "%u.%u", &major_v, &minor_v);
+	if (r != 2)
+		major_v = minor_v = 0;
+
+	switch (wacom->data[2] << 8 | wacom->data[3]) {
+	case MODEL_CINTIQ:	/* UNTESTED */
+	case MODEL_CINTIQ2:
+		if ((wacom->data[2] << 8 | wacom->data[3]) == MODEL_CINTIQ) {
+			wacom->dev->name = "Wacom Cintiq";
+			wacom->dev->id.version = MODEL_CINTIQ;
+		} else {
+			wacom->dev->name = "Wacom Cintiq II";
+			wacom->dev->id.version = MODEL_CINTIQ2;
+		}
+		wacom->res_x = 508;
+		wacom->res_y = 508;
+
+		switch (wacom->data[5] << 8 | wacom->data[6]) {
+		case 0x3731: /* PL-710 */
+			wacom->res_x = 2540;
+			wacom->res_y = 2540;
+			fallthrough;
+		case 0x3535: /* PL-550 */
+		case 0x3830: /* PL-800 */
+			wacom->extra_z_bits = 2;
+		}
+
+		wacom->flags = F_COVERS_SCREEN;
+		break;
+
+	case MODEL_PENPARTNER:
+		wacom->dev->name = "Wacom Penpartner";
+		wacom->dev->id.version = MODEL_PENPARTNER;
+		wacom->res_x = 1000;
+		wacom->res_y = 1000;
+		break;
+
+	case MODEL_GRAPHIRE:
+		wacom->dev->name = "Wacom Graphire";
+		wacom->dev->id.version = MODEL_GRAPHIRE;
+		wacom->res_x = 1016;
+		wacom->res_y = 1016;
+		wacom->max_x = 5103;
+		wacom->max_y = 3711;
+		wacom->extra_z_bits = 2;
+		wacom->eraser_mask = 0x08;
+		wacom->flags = F_HAS_STYLUS2 | F_HAS_SCROLLWHEEL;
+		break;
+
+	case MODEL_ARTPAD_II:
+	case MODEL_DIGITIZER_II:
+		wacom->dev->name = "Wacom Digitizer II";
+		wacom->dev->id.version = MODEL_DIGITIZER_II;
+		if (major_v == 1 && minor_v <= 2)
+			wacom->extra_z_bits = 0; /* UNTESTED */
+		break;
+
+	default:
+		dev_err(&wacom->dev->dev, "Unsupported Wacom model %s\n",
+			wacom->data);
+		wacom->result = -ENODEV;
+		return;
+	}
+
+	dev_info(&wacom->dev->dev, "%s tablet, version %u.%u\n",
+		 wacom->dev->name, major_v, minor_v);
+}
+
+static void wacom_handle_configuration_response(struct wacom *wacom)
+{
+	int r, skip;
+
+	dev_dbg(&wacom->dev->dev, "Configuration string: %s\n", wacom->data);
+	r = sscanf(wacom->data, "~R%x,%u,%u,%u,%u", &skip, &skip, &skip,
+		   &wacom->res_x, &wacom->res_y);
+	if (r != 5)
+		dev_warn(&wacom->dev->dev, "could not get resolution\n");
+}
+
+static void wacom_handle_coordinates_response(struct wacom *wacom)
+{
+	int r;
+
+	dev_dbg(&wacom->dev->dev, "Coordinates string: %s\n", wacom->data);
+	r = sscanf(wacom->data, "~C%u,%u", &wacom->max_x, &wacom->max_y);
+	if (r != 2)
+		dev_warn(&wacom->dev->dev, "could not get max coordinates\n");
+}
+
+static void wacom_handle_response(struct wacom *wacom)
+{
+	if (wacom->data[0] != '~' || wacom->data[1] != wacom->expect) {
+		dev_err(&wacom->dev->dev,
+			"Wacom got an unexpected response: %s\n", wacom->data);
+		wacom->result = -EIO;
+	} else {
+		wacom->result = 0;
+
+		switch (wacom->data[1]) {
+		case '#':
+			wacom_handle_model_response(wacom);
+			break;
+		case 'R':
+			wacom_handle_configuration_response(wacom);
+			break;
+		case 'C':
+			wacom_handle_coordinates_response(wacom);
+			break;
+		}
+	}
+
+	complete(&wacom->cmd_done);
+}
+
+static void wacom_handle_packet(struct wacom *wacom)
+{
+	u8 in_proximity_p, stylus_p, button;
+	unsigned int tool;
+	int x, y, z;
+
+	in_proximity_p = wacom->data[0] & 0x40;
+	stylus_p = wacom->data[0] & 0x20;
+	button = (wacom->data[3] & 0x78) >> 3;
+	x = (wacom->data[0] & 3) << 14 | wacom->data[1]<<7 | wacom->data[2];
+	y = (wacom->data[3] & 3) << 14 | wacom->data[4]<<7 | wacom->data[5];
+
+	if (in_proximity_p && stylus_p) {
+		z = wacom->data[6] & 0x7f;
+		if (wacom->extra_z_bits >= 1)
+			z = z << 1 | (wacom->data[3] & 0x4) >> 2;
+		if (wacom->extra_z_bits > 1)
+			z = z << 1 | (wacom->data[0] & 0x4) >> 2;
+		z = z ^ (0x40 << wacom->extra_z_bits);
+	} else {
+		z = -1;
+	}
+
+	if (stylus_p)
+		tool = (button & wacom->eraser_mask) ? ERASER : STYLUS;
+	else
+		tool = CURSOR;
+
+	if (tool != wacom->tool && wacom->tool != 0) {
+		input_report_key(wacom->dev, tools[wacom->tool].input_id, 0);
+		input_sync(wacom->dev);
+	}
+	wacom->tool = tool;
+
+	input_report_key(wacom->dev, tools[tool].input_id, in_proximity_p);
+	input_report_abs(wacom->dev, ABS_MISC,
+			 in_proximity_p ? tools[tool].device_id : 0);
+	input_report_abs(wacom->dev, ABS_X, x);
+	input_report_abs(wacom->dev, ABS_Y, y);
+	input_report_abs(wacom->dev, ABS_PRESSURE, z);
+	if (stylus_p) {
+		input_report_key(wacom->dev, BTN_TOUCH, button & 1);
+		input_report_key(wacom->dev, BTN_STYLUS, button & 2);
+		input_report_key(wacom->dev, BTN_STYLUS2, button & 4);
+	} else {
+		input_report_key(wacom->dev, BTN_LEFT, button & 1);
+		input_report_key(wacom->dev, BTN_RIGHT, button & 2);
+		input_report_key(wacom->dev, BTN_MIDDLE, button & 4);
+		/* handle relative wheel for non-stylus device */
+		z = (wacom->data[6] & 0x30) >> 4;
+		if (wacom->data[6] & 0x40)
+			z = -z;
+		input_report_rel(wacom->dev, REL_WHEEL, z);
+	}
+	input_sync(wacom->dev);
+}
+
+static void wacom_clear_data_buf(struct wacom *wacom)
+{
+	memset(wacom->data, 0, DATA_SIZE);
+	wacom->idx = 0;
+}
+
+static irqreturn_t wacom_interrupt(struct serio *serio, unsigned char data,
+				   unsigned int flags)
+{
+	struct wacom *wacom = serio_get_drvdata(serio);
+
+	if (data & 0x80)
+		wacom->idx = 0;
+
+	/*
+	 * We're either expecting a carriage return-terminated ASCII
+	 * response string, or a seven-byte packet with the MSB set on
+	 * the first byte.
+	 *
+	 * Note however that some tablets (the PenPartner, for
+	 * example) don't send a carriage return at the end of a
+	 * command.  We handle these by waiting for timeout.
+	 */
+	if (data == '\r' && !(wacom->data[0] & 0x80)) {
+		wacom_handle_response(wacom);
+		wacom_clear_data_buf(wacom);
+		return IRQ_HANDLED;
+	}
+
+	/* Leave place for 0 termination */
+	if (wacom->idx > (DATA_SIZE - 2)) {
+		dev_dbg(&wacom->dev->dev,
+			"throwing away %d bytes of garbage\n", wacom->idx);
+		wacom_clear_data_buf(wacom);
+	}
+	wacom->data[wacom->idx++] = data;
+
+	if (wacom->idx == PACKET_LENGTH && (wacom->data[0] & 0x80)) {
+		wacom_handle_packet(wacom);
+		wacom_clear_data_buf(wacom);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void wacom_disconnect(struct serio *serio)
+{
+	struct wacom *wacom = serio_get_drvdata(serio);
+
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_unregister_device(wacom->dev);
+	kfree(wacom);
+}
+
+static int wacom_send(struct serio *serio, const u8 *command)
+{
+	int err = 0;
+
+	for (; !err && *command; command++)
+		err = serio_write(serio, *command);
+
+	return err;
+}
+
+static int wacom_send_setup_string(struct wacom *wacom, struct serio *serio)
+{
+	const u8 *cmd;
+
+	switch (wacom->dev->id.version) {
+	case MODEL_CINTIQ:	/* UNTESTED */
+		cmd = COMMAND_ORIGIN_IN_UPPER_LEFT
+			COMMAND_TRANSMIT_AT_MAX_RATE
+			COMMAND_ENABLE_CONTINUOUS_MODE
+			COMMAND_START_SENDING_PACKETS;
+		break;
+
+	case MODEL_PENPARTNER:
+		cmd = COMMAND_ENABLE_PRESSURE_MODE
+			COMMAND_START_SENDING_PACKETS;
+		break;
+
+	default:
+		cmd = COMMAND_MULTI_MODE_INPUT
+			COMMAND_ORIGIN_IN_UPPER_LEFT
+			COMMAND_ENABLE_ALL_MACRO_BUTTONS
+			COMMAND_DISABLE_GROUP_1_MACRO_BUTTONS
+			COMMAND_TRANSMIT_AT_MAX_RATE
+			COMMAND_DISABLE_INCREMENTAL_MODE
+			COMMAND_ENABLE_CONTINUOUS_MODE
+			COMMAND_Z_FILTER
+			COMMAND_START_SENDING_PACKETS;
+		break;
+	}
+
+	return wacom_send(serio, cmd);
+}
+
+static int wacom_send_and_wait(struct wacom *wacom, struct serio *serio,
+			       const u8 *cmd, const char *desc)
+{
+	int err;
+	unsigned long u;
+
+	wacom->expect = cmd[1];
+	init_completion(&wacom->cmd_done);
+
+	err = wacom_send(serio, cmd);
+	if (err)
+		return err;
+
+	u = wait_for_completion_timeout(&wacom->cmd_done, HZ);
+	if (u == 0) {
+		/* Timeout, process what we've received. */
+		wacom_handle_response(wacom);
+	}
+
+	wacom->expect = 0;
+	return wacom->result;
+}
+
+static int wacom_setup(struct wacom *wacom, struct serio *serio)
+{
+	int err;
+
+	/* Note that setting the link speed is the job of inputattach.
+	 * We assume that reset negotiation has already happened,
+	 * here. */
+	err = wacom_send_and_wait(wacom, serio, REQUEST_MODEL_AND_ROM_VERSION,
+				  "model and version");
+	if (err)
+		return err;
+
+	if (!(wacom->res_x && wacom->res_y)) {
+		err = wacom_send_and_wait(wacom, serio,
+					  REQUEST_CONFIGURATION_STRING,
+					  "configuration string");
+		if (err)
+			return err;
+	}
+
+	if (!(wacom->max_x && wacom->max_y)) {
+		err = wacom_send_and_wait(wacom, serio,
+					  REQUEST_MAX_COORDINATES,
+					  "coordinates string");
+		if (err)
+			return err;
+	}
+
+	return wacom_send_setup_string(wacom, serio);
+}
+
+static int wacom_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct wacom *wacom;
+	struct input_dev *input_dev;
+	int err = -ENOMEM;
+
+	wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!wacom || !input_dev)
+		goto free_device;
+
+	wacom->dev = input_dev;
+	wacom->extra_z_bits = 1;
+	wacom->eraser_mask = 0x04;
+	wacom->tool = wacom->idx = 0;
+	snprintf(wacom->phys, sizeof(wacom->phys), "%s/input0", serio->phys);
+	input_dev->phys = wacom->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor  = SERIO_WACOM_IV;
+	input_dev->id.product = serio->id.extra;
+	input_dev->dev.parent = &serio->dev;
+
+	input_dev->evbit[0] =
+		BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) | BIT_MASK(EV_REL);
+	set_bit(ABS_MISC, input_dev->absbit);
+	set_bit(BTN_TOOL_PEN, input_dev->keybit);
+	set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
+	set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
+	set_bit(BTN_TOUCH, input_dev->keybit);
+	set_bit(BTN_STYLUS, input_dev->keybit);
+	set_bit(BTN_LEFT, input_dev->keybit);
+	set_bit(BTN_RIGHT, input_dev->keybit);
+	set_bit(BTN_MIDDLE, input_dev->keybit);
+
+	serio_set_drvdata(serio, wacom);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto free_device;
+
+	err = wacom_setup(wacom, serio);
+	if (err)
+		goto close_serio;
+
+	set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+	if (!(wacom->flags & F_COVERS_SCREEN))
+		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
+	if (wacom->flags & F_HAS_STYLUS2)
+		__set_bit(BTN_STYLUS2, input_dev->keybit);
+
+	if (wacom->flags & F_HAS_SCROLLWHEEL)
+		__set_bit(REL_WHEEL, input_dev->relbit);
+
+	input_abs_set_res(wacom->dev, ABS_X, wacom->res_x);
+	input_abs_set_res(wacom->dev, ABS_Y, wacom->res_y);
+	input_set_abs_params(wacom->dev, ABS_X, 0, wacom->max_x, 0, 0);
+	input_set_abs_params(wacom->dev, ABS_Y, 0, wacom->max_y, 0, 0);
+	input_set_abs_params(wacom->dev, ABS_PRESSURE, -1,
+			     (1 << (7 + wacom->extra_z_bits)) - 1, 0, 0);
+
+	err = input_register_device(wacom->dev);
+	if (err)
+		goto close_serio;
+
+	return 0;
+
+close_serio:
+	serio_close(serio);
+free_device:
+	serio_set_drvdata(serio, NULL);
+	input_free_device(input_dev);
+	kfree(wacom);
+	return err;
+}
+
+static const struct serio_device_id wacom_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_WACOM_IV,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, wacom_serio_ids);
+
+static struct serio_driver wacom_drv = {
+	.driver		= {
+		.name	= "wacom_serial4",
+	},
+	.description	= "Wacom protocol 4 serial tablet driver",
+	.id_table	= wacom_serio_ids,
+	.interrupt	= wacom_interrupt,
+	.connect	= wacom_connect,
+	.disconnect	= wacom_disconnect,
+};
+
+module_serio_driver(wacom_drv);