Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

4 files changed, 1268 insertions, 0 deletions

diff --git a/drivers/misc/mei/hdcp/Kconfig b/drivers/misc/mei/hdcp/Kconfig
new file mode 100644
index 000000000..95b2d6d37
--- /dev/null
+++ b/drivers/misc/mei/hdcp/Kconfig
@@ -0,0 +1,13 @@
+
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2019, Intel Corporation. All rights reserved.
+#
+config INTEL_MEI_HDCP
+	tristate "Intel HDCP2.2 services of ME Interface"
+	select INTEL_MEI_ME
+	depends on DRM_I915
+	help
+	  MEI Support for HDCP2.2 Services on Intel platforms.
+
+	  Enables the ME FW services required for HDCP2.2 support through
+	  I915 display driver of Intel.
diff --git a/drivers/misc/mei/hdcp/Makefile b/drivers/misc/mei/hdcp/Makefile
new file mode 100644
index 000000000..3fbb56485
--- /dev/null
+++ b/drivers/misc/mei/hdcp/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2019, Intel Corporation. All rights reserved.
+#
+# Makefile - HDCP client driver for Intel MEI Bus Driver.
+
+obj-$(CONFIG_INTEL_MEI_HDCP) += mei_hdcp.o
diff --git a/drivers/misc/mei/hdcp/mei_hdcp.c b/drivers/misc/mei/hdcp/mei_hdcp.c
new file mode 100644
index 000000000..9ae9669e4
--- /dev/null
+++ b/drivers/misc/mei/hdcp/mei_hdcp.c
@@ -0,0 +1,880 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright © 2019 Intel Corporation
+ *
+ * mei_hdcp.c: HDCP client driver for mei bus
+ *
+ * Author:
+ * Ramalingam C <ramalingam.c@intel.com>
+ */
+
+/**
+ * DOC: MEI_HDCP Client Driver
+ *
+ * The mei_hdcp driver acts as a translation layer between HDCP 2.2
+ * protocol  implementer (I915) and ME FW by translating HDCP2.2
+ * negotiation messages to ME FW command payloads and vice versa.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/uuid.h>
+#include <linux/mei_cl_bus.h>
+#include <linux/component.h>
+#include <drm/drm_connector.h>
+#include <drm/i915_component.h>
+#include <drm/i915_mei_hdcp_interface.h>
+
+#include "mei_hdcp.h"
+
+/**
+ * mei_hdcp_initiate_session() - Initiate a Wired HDCP2.2 Tx Session in ME FW
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @ake_data: AKE_Init msg output.
+ *
+ * Return:  0 on Success, <0 on Failure.
+ */
+static int
+mei_hdcp_initiate_session(struct device *dev, struct hdcp_port_data *data,
+			  struct hdcp2_ake_init *ake_data)
+{
+	struct wired_cmd_initiate_hdcp2_session_in session_init_in = { { 0 } };
+	struct wired_cmd_initiate_hdcp2_session_out
+						session_init_out = { { 0 } };
+	struct mei_cl_device *cldev;
+	ssize_t byte;
+
+	if (!dev || !data || !ake_data)
+		return -EINVAL;
+
+	cldev = to_mei_cl_device(dev);
+
+	session_init_in.header.api_version = HDCP_API_VERSION;
+	session_init_in.header.command_id = WIRED_INITIATE_HDCP2_SESSION;
+	session_init_in.header.status = ME_HDCP_STATUS_SUCCESS;
+	session_init_in.header.buffer_len =
+				WIRED_CMD_BUF_LEN_INITIATE_HDCP2_SESSION_IN;
+
+	session_init_in.port.integrated_port_type = data->port_type;
+	session_init_in.port.physical_port = (u8)data->fw_ddi;
+	session_init_in.port.attached_transcoder = (u8)data->fw_tc;
+	session_init_in.protocol = data->protocol;
+
+	byte = mei_cldev_send(cldev, (u8 *)&session_init_in,
+			      sizeof(session_init_in));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+		return byte;
+	}
+
+	byte = mei_cldev_recv(cldev, (u8 *)&session_init_out,
+			      sizeof(session_init_out));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+		return byte;
+	}
+
+	if (session_init_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+		dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n",
+			WIRED_INITIATE_HDCP2_SESSION,
+			session_init_out.header.status);
+		return -EIO;
+	}
+
+	ake_data->msg_id = HDCP_2_2_AKE_INIT;
+	ake_data->tx_caps = session_init_out.tx_caps;
+	memcpy(ake_data->r_tx, session_init_out.r_tx, HDCP_2_2_RTX_LEN);
+
+	return 0;
+}
+
+/**
+ * mei_hdcp_verify_receiver_cert_prepare_km() - Verify the Receiver Certificate
+ * AKE_Send_Cert and prepare AKE_Stored_Km/AKE_No_Stored_Km
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @rx_cert: AKE_Send_Cert for verification
+ * @km_stored: Pairing status flag output
+ * @ek_pub_km: AKE_Stored_Km/AKE_No_Stored_Km output msg
+ * @msg_sz : size of AKE_XXXXX_Km output msg
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int
+mei_hdcp_verify_receiver_cert_prepare_km(struct device *dev,
+					 struct hdcp_port_data *data,
+					 struct hdcp2_ake_send_cert *rx_cert,
+					 bool *km_stored,
+					 struct hdcp2_ake_no_stored_km
+								*ek_pub_km,
+					 size_t *msg_sz)
+{
+	struct wired_cmd_verify_receiver_cert_in verify_rxcert_in = { { 0 } };
+	struct wired_cmd_verify_receiver_cert_out verify_rxcert_out = { { 0 } };
+	struct mei_cl_device *cldev;
+	ssize_t byte;
+
+	if (!dev || !data || !rx_cert || !km_stored || !ek_pub_km || !msg_sz)
+		return -EINVAL;
+
+	cldev = to_mei_cl_device(dev);
+
+	verify_rxcert_in.header.api_version = HDCP_API_VERSION;
+	verify_rxcert_in.header.command_id = WIRED_VERIFY_RECEIVER_CERT;
+	verify_rxcert_in.header.status = ME_HDCP_STATUS_SUCCESS;
+	verify_rxcert_in.header.buffer_len =
+				WIRED_CMD_BUF_LEN_VERIFY_RECEIVER_CERT_IN;
+
+	verify_rxcert_in.port.integrated_port_type = data->port_type;
+	verify_rxcert_in.port.physical_port = (u8)data->fw_ddi;
+	verify_rxcert_in.port.attached_transcoder = (u8)data->fw_tc;
+
+	verify_rxcert_in.cert_rx = rx_cert->cert_rx;
+	memcpy(verify_rxcert_in.r_rx, &rx_cert->r_rx, HDCP_2_2_RRX_LEN);
+	memcpy(verify_rxcert_in.rx_caps, rx_cert->rx_caps, HDCP_2_2_RXCAPS_LEN);
+
+	byte = mei_cldev_send(cldev, (u8 *)&verify_rxcert_in,
+			      sizeof(verify_rxcert_in));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_send failed: %zd\n", byte);
+		return byte;
+	}
+
+	byte = mei_cldev_recv(cldev, (u8 *)&verify_rxcert_out,
+			      sizeof(verify_rxcert_out));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_recv failed: %zd\n", byte);
+		return byte;
+	}
+
+	if (verify_rxcert_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+		dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n",
+			WIRED_VERIFY_RECEIVER_CERT,
+			verify_rxcert_out.header.status);
+		return -EIO;
+	}
+
+	*km_stored = !!verify_rxcert_out.km_stored;
+	if (verify_rxcert_out.km_stored) {
+		ek_pub_km->msg_id = HDCP_2_2_AKE_STORED_KM;
+		*msg_sz = sizeof(struct hdcp2_ake_stored_km);
+	} else {
+		ek_pub_km->msg_id = HDCP_2_2_AKE_NO_STORED_KM;
+		*msg_sz = sizeof(struct hdcp2_ake_no_stored_km);
+	}
+
+	memcpy(ek_pub_km->e_kpub_km, &verify_rxcert_out.ekm_buff,
+	       sizeof(verify_rxcert_out.ekm_buff));
+
+	return 0;
+}
+
+/**
+ * mei_hdcp_verify_hprime() - Verify AKE_Send_H_prime at ME FW.
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @rx_hprime: AKE_Send_H_prime msg for ME FW verification
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int
+mei_hdcp_verify_hprime(struct device *dev, struct hdcp_port_data *data,
+		       struct hdcp2_ake_send_hprime *rx_hprime)
+{
+	struct wired_cmd_ake_send_hprime_in send_hprime_in = { { 0 } };
+	struct wired_cmd_ake_send_hprime_out send_hprime_out = { { 0 } };
+	struct mei_cl_device *cldev;
+	ssize_t byte;
+
+	if (!dev || !data || !rx_hprime)
+		return -EINVAL;
+
+	cldev = to_mei_cl_device(dev);
+
+	send_hprime_in.header.api_version = HDCP_API_VERSION;
+	send_hprime_in.header.command_id = WIRED_AKE_SEND_HPRIME;
+	send_hprime_in.header.status = ME_HDCP_STATUS_SUCCESS;
+	send_hprime_in.header.buffer_len = WIRED_CMD_BUF_LEN_AKE_SEND_HPRIME_IN;
+
+	send_hprime_in.port.integrated_port_type = data->port_type;
+	send_hprime_in.port.physical_port = (u8)data->fw_ddi;
+	send_hprime_in.port.attached_transcoder = (u8)data->fw_tc;
+
+	memcpy(send_hprime_in.h_prime, rx_hprime->h_prime,
+	       HDCP_2_2_H_PRIME_LEN);
+
+	byte = mei_cldev_send(cldev, (u8 *)&send_hprime_in,
+			      sizeof(send_hprime_in));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+		return byte;
+	}
+
+	byte = mei_cldev_recv(cldev, (u8 *)&send_hprime_out,
+			      sizeof(send_hprime_out));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+		return byte;
+	}
+
+	if (send_hprime_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+		dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n",
+			WIRED_AKE_SEND_HPRIME, send_hprime_out.header.status);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ * mei_hdcp_store_pairing_info() - Store pairing info received at ME FW
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @pairing_info: AKE_Send_Pairing_Info msg input to ME FW
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int
+mei_hdcp_store_pairing_info(struct device *dev, struct hdcp_port_data *data,
+			    struct hdcp2_ake_send_pairing_info *pairing_info)
+{
+	struct wired_cmd_ake_send_pairing_info_in pairing_info_in = { { 0 } };
+	struct wired_cmd_ake_send_pairing_info_out pairing_info_out = { { 0 } };
+	struct mei_cl_device *cldev;
+	ssize_t byte;
+
+	if (!dev || !data || !pairing_info)
+		return -EINVAL;
+
+	cldev = to_mei_cl_device(dev);
+
+	pairing_info_in.header.api_version = HDCP_API_VERSION;
+	pairing_info_in.header.command_id = WIRED_AKE_SEND_PAIRING_INFO;
+	pairing_info_in.header.status = ME_HDCP_STATUS_SUCCESS;
+	pairing_info_in.header.buffer_len =
+					WIRED_CMD_BUF_LEN_SEND_PAIRING_INFO_IN;
+
+	pairing_info_in.port.integrated_port_type = data->port_type;
+	pairing_info_in.port.physical_port = (u8)data->fw_ddi;
+	pairing_info_in.port.attached_transcoder = (u8)data->fw_tc;
+
+	memcpy(pairing_info_in.e_kh_km, pairing_info->e_kh_km,
+	       HDCP_2_2_E_KH_KM_LEN);
+
+	byte = mei_cldev_send(cldev, (u8 *)&pairing_info_in,
+			      sizeof(pairing_info_in));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+		return byte;
+	}
+
+	byte = mei_cldev_recv(cldev, (u8 *)&pairing_info_out,
+			      sizeof(pairing_info_out));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+		return byte;
+	}
+
+	if (pairing_info_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+		dev_dbg(dev, "ME cmd 0x%08X failed. Status: 0x%X\n",
+			WIRED_AKE_SEND_PAIRING_INFO,
+			pairing_info_out.header.status);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ * mei_hdcp_initiate_locality_check() - Prepare LC_Init
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @lc_init_data: LC_Init msg output
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int
+mei_hdcp_initiate_locality_check(struct device *dev,
+				 struct hdcp_port_data *data,
+				 struct hdcp2_lc_init *lc_init_data)
+{
+	struct wired_cmd_init_locality_check_in lc_init_in = { { 0 } };
+	struct wired_cmd_init_locality_check_out lc_init_out = { { 0 } };
+	struct mei_cl_device *cldev;
+	ssize_t byte;
+
+	if (!dev || !data || !lc_init_data)
+		return -EINVAL;
+
+	cldev = to_mei_cl_device(dev);
+
+	lc_init_in.header.api_version = HDCP_API_VERSION;
+	lc_init_in.header.command_id = WIRED_INIT_LOCALITY_CHECK;
+	lc_init_in.header.status = ME_HDCP_STATUS_SUCCESS;
+	lc_init_in.header.buffer_len = WIRED_CMD_BUF_LEN_INIT_LOCALITY_CHECK_IN;
+
+	lc_init_in.port.integrated_port_type = data->port_type;
+	lc_init_in.port.physical_port = (u8)data->fw_ddi;
+	lc_init_in.port.attached_transcoder = (u8)data->fw_tc;
+
+	byte = mei_cldev_send(cldev, (u8 *)&lc_init_in, sizeof(lc_init_in));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+		return byte;
+	}
+
+	byte = mei_cldev_recv(cldev, (u8 *)&lc_init_out, sizeof(lc_init_out));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+		return byte;
+	}
+
+	if (lc_init_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+		dev_dbg(dev, "ME cmd 0x%08X Failed. status: 0x%X\n",
+			WIRED_INIT_LOCALITY_CHECK, lc_init_out.header.status);
+		return -EIO;
+	}
+
+	lc_init_data->msg_id = HDCP_2_2_LC_INIT;
+	memcpy(lc_init_data->r_n, lc_init_out.r_n, HDCP_2_2_RN_LEN);
+
+	return 0;
+}
+
+/**
+ * mei_hdcp_verify_lprime() - Verify lprime.
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @rx_lprime: LC_Send_L_prime msg for ME FW verification
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int
+mei_hdcp_verify_lprime(struct device *dev, struct hdcp_port_data *data,
+		       struct hdcp2_lc_send_lprime *rx_lprime)
+{
+	struct wired_cmd_validate_locality_in verify_lprime_in = { { 0 } };
+	struct wired_cmd_validate_locality_out verify_lprime_out = { { 0 } };
+	struct mei_cl_device *cldev;
+	ssize_t byte;
+
+	if (!dev || !data || !rx_lprime)
+		return -EINVAL;
+
+	cldev = to_mei_cl_device(dev);
+
+	verify_lprime_in.header.api_version = HDCP_API_VERSION;
+	verify_lprime_in.header.command_id = WIRED_VALIDATE_LOCALITY;
+	verify_lprime_in.header.status = ME_HDCP_STATUS_SUCCESS;
+	verify_lprime_in.header.buffer_len =
+					WIRED_CMD_BUF_LEN_VALIDATE_LOCALITY_IN;
+
+	verify_lprime_in.port.integrated_port_type = data->port_type;
+	verify_lprime_in.port.physical_port = (u8)data->fw_ddi;
+	verify_lprime_in.port.attached_transcoder = (u8)data->fw_tc;
+
+	memcpy(verify_lprime_in.l_prime, rx_lprime->l_prime,
+	       HDCP_2_2_L_PRIME_LEN);
+
+	byte = mei_cldev_send(cldev, (u8 *)&verify_lprime_in,
+			      sizeof(verify_lprime_in));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+		return byte;
+	}
+
+	byte = mei_cldev_recv(cldev, (u8 *)&verify_lprime_out,
+			      sizeof(verify_lprime_out));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+		return byte;
+	}
+
+	if (verify_lprime_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+		dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n",
+			WIRED_VALIDATE_LOCALITY,
+			verify_lprime_out.header.status);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ * mei_hdcp_get_session_key() - Prepare SKE_Send_Eks.
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @ske_data: SKE_Send_Eks msg output from ME FW.
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int mei_hdcp_get_session_key(struct device *dev,
+				    struct hdcp_port_data *data,
+				    struct hdcp2_ske_send_eks *ske_data)
+{
+	struct wired_cmd_get_session_key_in get_skey_in = { { 0 } };
+	struct wired_cmd_get_session_key_out get_skey_out = { { 0 } };
+	struct mei_cl_device *cldev;
+	ssize_t byte;
+
+	if (!dev || !data || !ske_data)
+		return -EINVAL;
+
+	cldev = to_mei_cl_device(dev);
+
+	get_skey_in.header.api_version = HDCP_API_VERSION;
+	get_skey_in.header.command_id = WIRED_GET_SESSION_KEY;
+	get_skey_in.header.status = ME_HDCP_STATUS_SUCCESS;
+	get_skey_in.header.buffer_len = WIRED_CMD_BUF_LEN_GET_SESSION_KEY_IN;
+
+	get_skey_in.port.integrated_port_type = data->port_type;
+	get_skey_in.port.physical_port = (u8)data->fw_ddi;
+	get_skey_in.port.attached_transcoder = (u8)data->fw_tc;
+
+	byte = mei_cldev_send(cldev, (u8 *)&get_skey_in, sizeof(get_skey_in));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+		return byte;
+	}
+
+	byte = mei_cldev_recv(cldev, (u8 *)&get_skey_out, sizeof(get_skey_out));
+
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+		return byte;
+	}
+
+	if (get_skey_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+		dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n",
+			WIRED_GET_SESSION_KEY, get_skey_out.header.status);
+		return -EIO;
+	}
+
+	ske_data->msg_id = HDCP_2_2_SKE_SEND_EKS;
+	memcpy(ske_data->e_dkey_ks, get_skey_out.e_dkey_ks,
+	       HDCP_2_2_E_DKEY_KS_LEN);
+	memcpy(ske_data->riv, get_skey_out.r_iv, HDCP_2_2_RIV_LEN);
+
+	return 0;
+}
+
+/**
+ * mei_hdcp_repeater_check_flow_prepare_ack() - Validate the Downstream topology
+ * and prepare rep_ack.
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @rep_topology: Receiver ID List to be validated
+ * @rep_send_ack : repeater ack from ME FW.
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int
+mei_hdcp_repeater_check_flow_prepare_ack(struct device *dev,
+					 struct hdcp_port_data *data,
+					 struct hdcp2_rep_send_receiverid_list
+							*rep_topology,
+					 struct hdcp2_rep_send_ack
+							*rep_send_ack)
+{
+	struct wired_cmd_verify_repeater_in verify_repeater_in = { { 0 } };
+	struct wired_cmd_verify_repeater_out verify_repeater_out = { { 0 } };
+	struct mei_cl_device *cldev;
+	ssize_t byte;
+
+	if (!dev || !rep_topology || !rep_send_ack || !data)
+		return -EINVAL;
+
+	cldev = to_mei_cl_device(dev);
+
+	verify_repeater_in.header.api_version = HDCP_API_VERSION;
+	verify_repeater_in.header.command_id = WIRED_VERIFY_REPEATER;
+	verify_repeater_in.header.status = ME_HDCP_STATUS_SUCCESS;
+	verify_repeater_in.header.buffer_len =
+					WIRED_CMD_BUF_LEN_VERIFY_REPEATER_IN;
+
+	verify_repeater_in.port.integrated_port_type = data->port_type;
+	verify_repeater_in.port.physical_port = (u8)data->fw_ddi;
+	verify_repeater_in.port.attached_transcoder = (u8)data->fw_tc;
+
+	memcpy(verify_repeater_in.rx_info, rep_topology->rx_info,
+	       HDCP_2_2_RXINFO_LEN);
+	memcpy(verify_repeater_in.seq_num_v, rep_topology->seq_num_v,
+	       HDCP_2_2_SEQ_NUM_LEN);
+	memcpy(verify_repeater_in.v_prime, rep_topology->v_prime,
+	       HDCP_2_2_V_PRIME_HALF_LEN);
+	memcpy(verify_repeater_in.receiver_ids, rep_topology->receiver_ids,
+	       HDCP_2_2_RECEIVER_IDS_MAX_LEN);
+
+	byte = mei_cldev_send(cldev, (u8 *)&verify_repeater_in,
+			      sizeof(verify_repeater_in));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+		return byte;
+	}
+
+	byte = mei_cldev_recv(cldev, (u8 *)&verify_repeater_out,
+			      sizeof(verify_repeater_out));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+		return byte;
+	}
+
+	if (verify_repeater_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+		dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n",
+			WIRED_VERIFY_REPEATER,
+			verify_repeater_out.header.status);
+		return -EIO;
+	}
+
+	memcpy(rep_send_ack->v, verify_repeater_out.v,
+	       HDCP_2_2_V_PRIME_HALF_LEN);
+	rep_send_ack->msg_id = HDCP_2_2_REP_SEND_ACK;
+
+	return 0;
+}
+
+/**
+ * mei_hdcp_verify_mprime() - Verify mprime.
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @stream_ready: RepeaterAuth_Stream_Ready msg for ME FW verification.
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int mei_hdcp_verify_mprime(struct device *dev,
+				  struct hdcp_port_data *data,
+				  struct hdcp2_rep_stream_ready *stream_ready)
+{
+	struct wired_cmd_repeater_auth_stream_req_in *verify_mprime_in;
+	struct wired_cmd_repeater_auth_stream_req_out
+					verify_mprime_out = { { 0 } };
+	struct mei_cl_device *cldev;
+	ssize_t byte;
+	size_t cmd_size;
+
+	if (!dev || !stream_ready || !data)
+		return -EINVAL;
+
+	cldev = to_mei_cl_device(dev);
+
+	cmd_size = struct_size(verify_mprime_in, streams, data->k);
+	if (cmd_size == SIZE_MAX)
+		return -EINVAL;
+
+	verify_mprime_in = kzalloc(cmd_size, GFP_KERNEL);
+	if (!verify_mprime_in)
+		return -ENOMEM;
+
+	verify_mprime_in->header.api_version = HDCP_API_VERSION;
+	verify_mprime_in->header.command_id = WIRED_REPEATER_AUTH_STREAM_REQ;
+	verify_mprime_in->header.status = ME_HDCP_STATUS_SUCCESS;
+	verify_mprime_in->header.buffer_len =
+			WIRED_CMD_BUF_LEN_REPEATER_AUTH_STREAM_REQ_MIN_IN;
+
+	verify_mprime_in->port.integrated_port_type = data->port_type;
+	verify_mprime_in->port.physical_port = (u8)data->fw_ddi;
+	verify_mprime_in->port.attached_transcoder = (u8)data->fw_tc;
+
+	memcpy(verify_mprime_in->m_prime, stream_ready->m_prime, HDCP_2_2_MPRIME_LEN);
+	drm_hdcp_cpu_to_be24(verify_mprime_in->seq_num_m, data->seq_num_m);
+
+	memcpy(verify_mprime_in->streams, data->streams,
+	       array_size(data->k, sizeof(*data->streams)));
+
+	verify_mprime_in->k = cpu_to_be16(data->k);
+
+	byte = mei_cldev_send(cldev, (u8 *)verify_mprime_in, cmd_size);
+	kfree(verify_mprime_in);
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+		return byte;
+	}
+
+	byte = mei_cldev_recv(cldev, (u8 *)&verify_mprime_out,
+			      sizeof(verify_mprime_out));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+		return byte;
+	}
+
+	if (verify_mprime_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+		dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n",
+			WIRED_REPEATER_AUTH_STREAM_REQ,
+			verify_mprime_out.header.status);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ * mei_hdcp_enable_authentication() - Mark a port as authenticated
+ * through ME FW
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int mei_hdcp_enable_authentication(struct device *dev,
+					  struct hdcp_port_data *data)
+{
+	struct wired_cmd_enable_auth_in enable_auth_in = { { 0 } };
+	struct wired_cmd_enable_auth_out enable_auth_out = { { 0 } };
+	struct mei_cl_device *cldev;
+	ssize_t byte;
+
+	if (!dev || !data)
+		return -EINVAL;
+
+	cldev = to_mei_cl_device(dev);
+
+	enable_auth_in.header.api_version = HDCP_API_VERSION;
+	enable_auth_in.header.command_id = WIRED_ENABLE_AUTH;
+	enable_auth_in.header.status = ME_HDCP_STATUS_SUCCESS;
+	enable_auth_in.header.buffer_len = WIRED_CMD_BUF_LEN_ENABLE_AUTH_IN;
+
+	enable_auth_in.port.integrated_port_type = data->port_type;
+	enable_auth_in.port.physical_port = (u8)data->fw_ddi;
+	enable_auth_in.port.attached_transcoder = (u8)data->fw_tc;
+	enable_auth_in.stream_type = data->streams[0].stream_type;
+
+	byte = mei_cldev_send(cldev, (u8 *)&enable_auth_in,
+			      sizeof(enable_auth_in));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+		return byte;
+	}
+
+	byte = mei_cldev_recv(cldev, (u8 *)&enable_auth_out,
+			      sizeof(enable_auth_out));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+		return byte;
+	}
+
+	if (enable_auth_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+		dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n",
+			WIRED_ENABLE_AUTH, enable_auth_out.header.status);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ * mei_hdcp_close_session() - Close the Wired HDCP Tx session of ME FW per port.
+ * This also disables the authenticated state of the port.
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int
+mei_hdcp_close_session(struct device *dev, struct hdcp_port_data *data)
+{
+	struct wired_cmd_close_session_in session_close_in = { { 0 } };
+	struct wired_cmd_close_session_out session_close_out = { { 0 } };
+	struct mei_cl_device *cldev;
+	ssize_t byte;
+
+	if (!dev || !data)
+		return -EINVAL;
+
+	cldev = to_mei_cl_device(dev);
+
+	session_close_in.header.api_version = HDCP_API_VERSION;
+	session_close_in.header.command_id = WIRED_CLOSE_SESSION;
+	session_close_in.header.status = ME_HDCP_STATUS_SUCCESS;
+	session_close_in.header.buffer_len =
+				WIRED_CMD_BUF_LEN_CLOSE_SESSION_IN;
+
+	session_close_in.port.integrated_port_type = data->port_type;
+	session_close_in.port.physical_port = (u8)data->fw_ddi;
+	session_close_in.port.attached_transcoder = (u8)data->fw_tc;
+
+	byte = mei_cldev_send(cldev, (u8 *)&session_close_in,
+			      sizeof(session_close_in));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+		return byte;
+	}
+
+	byte = mei_cldev_recv(cldev, (u8 *)&session_close_out,
+			      sizeof(session_close_out));
+	if (byte < 0) {
+		dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+		return byte;
+	}
+
+	if (session_close_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+		dev_dbg(dev, "Session Close Failed. status: 0x%X\n",
+			session_close_out.header.status);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static const struct i915_hdcp_component_ops mei_hdcp_ops = {
+	.owner = THIS_MODULE,
+	.initiate_hdcp2_session = mei_hdcp_initiate_session,
+	.verify_receiver_cert_prepare_km =
+				mei_hdcp_verify_receiver_cert_prepare_km,
+	.verify_hprime = mei_hdcp_verify_hprime,
+	.store_pairing_info = mei_hdcp_store_pairing_info,
+	.initiate_locality_check = mei_hdcp_initiate_locality_check,
+	.verify_lprime = mei_hdcp_verify_lprime,
+	.get_session_key = mei_hdcp_get_session_key,
+	.repeater_check_flow_prepare_ack =
+				mei_hdcp_repeater_check_flow_prepare_ack,
+	.verify_mprime = mei_hdcp_verify_mprime,
+	.enable_hdcp_authentication = mei_hdcp_enable_authentication,
+	.close_hdcp_session = mei_hdcp_close_session,
+};
+
+static int mei_component_master_bind(struct device *dev)
+{
+	struct mei_cl_device *cldev = to_mei_cl_device(dev);
+	struct i915_hdcp_comp_master *comp_master =
+						mei_cldev_get_drvdata(cldev);
+	int ret;
+
+	dev_dbg(dev, "%s\n", __func__);
+	comp_master->ops = &mei_hdcp_ops;
+	comp_master->mei_dev = dev;
+	ret = component_bind_all(dev, comp_master);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static void mei_component_master_unbind(struct device *dev)
+{
+	struct mei_cl_device *cldev = to_mei_cl_device(dev);
+	struct i915_hdcp_comp_master *comp_master =
+						mei_cldev_get_drvdata(cldev);
+
+	dev_dbg(dev, "%s\n", __func__);
+	component_unbind_all(dev, comp_master);
+}
+
+static const struct component_master_ops mei_component_master_ops = {
+	.bind = mei_component_master_bind,
+	.unbind = mei_component_master_unbind,
+};
+
+/**
+ * mei_hdcp_component_match - compare function for matching mei hdcp.
+ *
+ *    The function checks if the driver is i915, the subcomponent is HDCP
+ *    and the grand parent of hdcp and the parent of i915 are the same
+ *    PCH device.
+ *
+ * @dev: master device
+ * @subcomponent: subcomponent to match (I915_COMPONENT_HDCP)
+ * @data: compare data (mei hdcp device)
+ *
+ * Return:
+ * * 1 - if components match
+ * * 0 - otherwise
+ */
+static int mei_hdcp_component_match(struct device *dev, int subcomponent,
+				    void *data)
+{
+	struct device *base = data;
+
+	if (strcmp(dev->driver->name, "i915") ||
+	    subcomponent != I915_COMPONENT_HDCP)
+		return 0;
+
+	base = base->parent;
+	if (!base)
+		return 0;
+
+	base = base->parent;
+	dev = dev->parent;
+
+	return (base && dev && dev == base);
+}
+
+static int mei_hdcp_probe(struct mei_cl_device *cldev,
+			  const struct mei_cl_device_id *id)
+{
+	struct i915_hdcp_comp_master *comp_master;
+	struct component_match *master_match;
+	int ret;
+
+	ret = mei_cldev_enable(cldev);
+	if (ret < 0) {
+		dev_err(&cldev->dev, "mei_cldev_enable Failed. %d\n", ret);
+		goto enable_err_exit;
+	}
+
+	comp_master = kzalloc(sizeof(*comp_master), GFP_KERNEL);
+	if (!comp_master) {
+		ret = -ENOMEM;
+		goto err_exit;
+	}
+
+	master_match = NULL;
+	component_match_add_typed(&cldev->dev, &master_match,
+				  mei_hdcp_component_match, &cldev->dev);
+	if (IS_ERR_OR_NULL(master_match)) {
+		ret = -ENOMEM;
+		goto err_exit;
+	}
+
+	mei_cldev_set_drvdata(cldev, comp_master);
+	ret = component_master_add_with_match(&cldev->dev,
+					      &mei_component_master_ops,
+					      master_match);
+	if (ret < 0) {
+		dev_err(&cldev->dev, "Master comp add failed %d\n", ret);
+		goto err_exit;
+	}
+
+	return 0;
+
+err_exit:
+	mei_cldev_set_drvdata(cldev, NULL);
+	kfree(comp_master);
+	mei_cldev_disable(cldev);
+enable_err_exit:
+	return ret;
+}
+
+static int mei_hdcp_remove(struct mei_cl_device *cldev)
+{
+	struct i915_hdcp_comp_master *comp_master =
+						mei_cldev_get_drvdata(cldev);
+
+	component_master_del(&cldev->dev, &mei_component_master_ops);
+	kfree(comp_master);
+	mei_cldev_set_drvdata(cldev, NULL);
+
+	return mei_cldev_disable(cldev);
+}
+
+#define MEI_UUID_HDCP GUID_INIT(0xB638AB7E, 0x94E2, 0x4EA2, 0xA5, \
+				0x52, 0xD1, 0xC5, 0x4B, 0x62, 0x7F, 0x04)
+
+static const struct mei_cl_device_id mei_hdcp_tbl[] = {
+	{ .uuid = MEI_UUID_HDCP, .version = MEI_CL_VERSION_ANY },
+	{ }
+};
+MODULE_DEVICE_TABLE(mei, mei_hdcp_tbl);
+
+static struct mei_cl_driver mei_hdcp_driver = {
+	.id_table = mei_hdcp_tbl,
+	.name = KBUILD_MODNAME,
+	.probe = mei_hdcp_probe,
+	.remove	= mei_hdcp_remove,
+};
+
+module_mei_cl_driver(mei_hdcp_driver);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MEI HDCP");
diff --git a/drivers/misc/mei/hdcp/mei_hdcp.h b/drivers/misc/mei/hdcp/mei_hdcp.h
new file mode 100644
index 000000000..834757f5e
--- /dev/null
+++ b/drivers/misc/mei/hdcp/mei_hdcp.h
@@ -0,0 +1,368 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright © 2019 Intel Corporation
+ *
+ * Authors:
+ * Ramalingam C <ramalingam.c@intel.com>
+ */
+
+#ifndef __MEI_HDCP_H__
+#define __MEI_HDCP_H__
+
+#include <drm/drm_hdcp.h>
+
+/* me_hdcp_status: Enumeration of all HDCP Status Codes */
+enum me_hdcp_status {
+	ME_HDCP_STATUS_SUCCESS			= 0x0000,
+
+	/* WiDi Generic Status Codes */
+	ME_HDCP_STATUS_INTERNAL_ERROR		= 0x1000,
+	ME_HDCP_STATUS_UNKNOWN_ERROR		= 0x1001,
+	ME_HDCP_STATUS_INCORRECT_API_VERSION	= 0x1002,
+	ME_HDCP_STATUS_INVALID_FUNCTION		= 0x1003,
+	ME_HDCP_STATUS_INVALID_BUFFER_LENGTH	= 0x1004,
+	ME_HDCP_STATUS_INVALID_PARAMS		= 0x1005,
+	ME_HDCP_STATUS_AUTHENTICATION_FAILED	= 0x1006,
+
+	/* WiDi Status Codes */
+	ME_HDCP_INVALID_SESSION_STATE		= 0x6000,
+	ME_HDCP_SRM_FRAGMENT_UNEXPECTED		= 0x6001,
+	ME_HDCP_SRM_INVALID_LENGTH		= 0x6002,
+	ME_HDCP_SRM_FRAGMENT_OFFSET_INVALID	= 0x6003,
+	ME_HDCP_SRM_VERIFICATION_FAILED		= 0x6004,
+	ME_HDCP_SRM_VERSION_TOO_OLD		= 0x6005,
+	ME_HDCP_RX_CERT_VERIFICATION_FAILED	= 0x6006,
+	ME_HDCP_RX_REVOKED			= 0x6007,
+	ME_HDCP_H_VERIFICATION_FAILED		= 0x6008,
+	ME_HDCP_REPEATER_CHECK_UNEXPECTED	= 0x6009,
+	ME_HDCP_TOPOLOGY_MAX_EXCEEDED		= 0x600A,
+	ME_HDCP_V_VERIFICATION_FAILED		= 0x600B,
+	ME_HDCP_L_VERIFICATION_FAILED		= 0x600C,
+	ME_HDCP_STREAM_KEY_ALLOC_FAILED		= 0x600D,
+	ME_HDCP_BASE_KEY_RESET_FAILED		= 0x600E,
+	ME_HDCP_NONCE_GENERATION_FAILED		= 0x600F,
+	ME_HDCP_STATUS_INVALID_E_KEY_STATE	= 0x6010,
+	ME_HDCP_STATUS_INVALID_CS_ICV		= 0x6011,
+	ME_HDCP_STATUS_INVALID_KB_KEY_STATE	= 0x6012,
+	ME_HDCP_STATUS_INVALID_PAVP_MODE_ICV	= 0x6013,
+	ME_HDCP_STATUS_INVALID_PAVP_MODE	= 0x6014,
+	ME_HDCP_STATUS_LC_MAX_ATTEMPTS		= 0x6015,
+
+	/* New status for HDCP 2.1 */
+	ME_HDCP_STATUS_MISMATCH_IN_M		= 0x6016,
+
+	/* New status code for HDCP 2.2 Rx */
+	ME_HDCP_STATUS_RX_PROV_NOT_ALLOWED	= 0x6017,
+	ME_HDCP_STATUS_RX_PROV_WRONG_SUBJECT	= 0x6018,
+	ME_HDCP_RX_NEEDS_PROVISIONING		= 0x6019,
+	ME_HDCP_BKSV_ICV_AUTH_FAILED		= 0x6020,
+	ME_HDCP_STATUS_INVALID_STREAM_ID	= 0x6021,
+	ME_HDCP_STATUS_CHAIN_NOT_INITIALIZED	= 0x6022,
+	ME_HDCP_FAIL_NOT_EXPECTED		= 0x6023,
+	ME_HDCP_FAIL_HDCP_OFF			= 0x6024,
+	ME_HDCP_FAIL_INVALID_PAVP_MEMORY_MODE	= 0x6025,
+	ME_HDCP_FAIL_AES_ECB_FAILURE		= 0x6026,
+	ME_HDCP_FEATURE_NOT_SUPPORTED		= 0x6027,
+	ME_HDCP_DMA_READ_ERROR			= 0x6028,
+	ME_HDCP_DMA_WRITE_ERROR			= 0x6029,
+	ME_HDCP_FAIL_INVALID_PACKET_SIZE	= 0x6030,
+	ME_HDCP_H264_PARSING_ERROR		= 0x6031,
+	ME_HDCP_HDCP2_ERRATA_VIDEO_VIOLATION	= 0x6032,
+	ME_HDCP_HDCP2_ERRATA_AUDIO_VIOLATION	= 0x6033,
+	ME_HDCP_TX_ACTIVE_ERROR			= 0x6034,
+	ME_HDCP_MODE_CHANGE_ERROR		= 0x6035,
+	ME_HDCP_STREAM_TYPE_ERROR		= 0x6036,
+	ME_HDCP_STREAM_MANAGE_NOT_POSSIBLE	= 0x6037,
+
+	ME_HDCP_STATUS_PORT_INVALID_COMMAND	= 0x6038,
+	ME_HDCP_STATUS_UNSUPPORTED_PROTOCOL	= 0x6039,
+	ME_HDCP_STATUS_INVALID_PORT_INDEX	= 0x603a,
+	ME_HDCP_STATUS_TX_AUTH_NEEDED		= 0x603b,
+	ME_HDCP_STATUS_NOT_INTEGRATED_PORT	= 0x603c,
+	ME_HDCP_STATUS_SESSION_MAX_REACHED	= 0x603d,
+
+	/* hdcp capable bit is not set in rx_caps(error is unique to DP) */
+	ME_HDCP_STATUS_NOT_HDCP_CAPABLE		= 0x6041,
+
+	ME_HDCP_STATUS_INVALID_STREAM_COUNT	= 0x6042,
+};
+
+#define HDCP_API_VERSION				0x00010000
+
+#define HDCP_M_LEN					16
+#define HDCP_KH_LEN					16
+
+/* Payload Buffer size(Excluding Header) for CMDs and corresponding response */
+/* Wired_Tx_AKE  */
+#define	WIRED_CMD_BUF_LEN_INITIATE_HDCP2_SESSION_IN	(4 + 1)
+#define	WIRED_CMD_BUF_LEN_INITIATE_HDCP2_SESSION_OUT	(4 + 8 + 3)
+
+#define	WIRED_CMD_BUF_LEN_VERIFY_RECEIVER_CERT_IN	(4 + 522 + 8 + 3)
+#define	WIRED_CMD_BUF_LEN_VERIFY_RECEIVER_CERT_MIN_OUT	(4 + 1 + 3 + 16 + 16)
+#define	WIRED_CMD_BUF_LEN_VERIFY_RECEIVER_CERT_MAX_OUT	(4 + 1 + 3 + 128)
+
+#define	WIRED_CMD_BUF_LEN_AKE_SEND_HPRIME_IN		(4 + 32)
+#define	WIRED_CMD_BUF_LEN_AKE_SEND_HPRIME_OUT		(4)
+
+#define	WIRED_CMD_BUF_LEN_SEND_PAIRING_INFO_IN		(4 + 16)
+#define	WIRED_CMD_BUF_LEN_SEND_PAIRING_INFO_OUT		(4)
+
+#define	WIRED_CMD_BUF_LEN_CLOSE_SESSION_IN		(4)
+#define	WIRED_CMD_BUF_LEN_CLOSE_SESSION_OUT		(4)
+
+/* Wired_Tx_LC */
+#define	WIRED_CMD_BUF_LEN_INIT_LOCALITY_CHECK_IN	(4)
+#define	WIRED_CMD_BUF_LEN_INIT_LOCALITY_CHECK_OUT	(4 + 8)
+
+#define	WIRED_CMD_BUF_LEN_VALIDATE_LOCALITY_IN		(4 + 32)
+#define	WIRED_CMD_BUF_LEN_VALIDATE_LOCALITY_OUT		(4)
+
+/* Wired_Tx_SKE */
+#define	WIRED_CMD_BUF_LEN_GET_SESSION_KEY_IN		(4)
+#define	WIRED_CMD_BUF_LEN_GET_SESSION_KEY_OUT		(4 + 16 + 8)
+
+/* Wired_Tx_SKE */
+#define	WIRED_CMD_BUF_LEN_ENABLE_AUTH_IN		(4 + 1)
+#define	WIRED_CMD_BUF_LEN_ENABLE_AUTH_OUT		(4)
+
+/* Wired_Tx_Repeater */
+#define	WIRED_CMD_BUF_LEN_VERIFY_REPEATER_IN		(4 + 2 + 3 + 16 + 155)
+#define	WIRED_CMD_BUF_LEN_VERIFY_REPEATER_OUT		(4 + 1 + 16)
+
+#define	WIRED_CMD_BUF_LEN_REPEATER_AUTH_STREAM_REQ_MIN_IN	(4 + 3 + \
+								32 + 2 + 2)
+
+#define	WIRED_CMD_BUF_LEN_REPEATER_AUTH_STREAM_REQ_OUT		(4)
+
+/* hdcp_command_id: Enumeration of all WIRED HDCP Command IDs */
+enum hdcp_command_id {
+	_WIDI_COMMAND_BASE		= 0x00030000,
+	WIDI_INITIATE_HDCP2_SESSION	= _WIDI_COMMAND_BASE,
+	HDCP_GET_SRM_STATUS,
+	HDCP_SEND_SRM_FRAGMENT,
+
+	/* The wired HDCP Tx commands */
+	_WIRED_COMMAND_BASE		= 0x00031000,
+	WIRED_INITIATE_HDCP2_SESSION	= _WIRED_COMMAND_BASE,
+	WIRED_VERIFY_RECEIVER_CERT,
+	WIRED_AKE_SEND_HPRIME,
+	WIRED_AKE_SEND_PAIRING_INFO,
+	WIRED_INIT_LOCALITY_CHECK,
+	WIRED_VALIDATE_LOCALITY,
+	WIRED_GET_SESSION_KEY,
+	WIRED_ENABLE_AUTH,
+	WIRED_VERIFY_REPEATER,
+	WIRED_REPEATER_AUTH_STREAM_REQ,
+	WIRED_CLOSE_SESSION,
+
+	_WIRED_COMMANDS_COUNT,
+};
+
+union encrypted_buff {
+	u8		e_kpub_km[HDCP_2_2_E_KPUB_KM_LEN];
+	u8		e_kh_km_m[HDCP_2_2_E_KH_KM_M_LEN];
+	struct {
+		u8	e_kh_km[HDCP_KH_LEN];
+		u8	m[HDCP_M_LEN];
+	} __packed;
+};
+
+/* HDCP HECI message header. All header values are little endian. */
+struct hdcp_cmd_header {
+	u32			api_version;
+	u32			command_id;
+	enum me_hdcp_status	status;
+	/* Length of the HECI message (excluding the header) */
+	u32			buffer_len;
+} __packed;
+
+/* Empty command request or response. No data follows the header. */
+struct hdcp_cmd_no_data {
+	struct hdcp_cmd_header header;
+} __packed;
+
+/* Uniquely identifies the hdcp port being addressed for a given command. */
+struct hdcp_port_id {
+	u8	integrated_port_type;
+	/* physical_port is used until Gen11.5. Must be zero for Gen11.5+ */
+	u8	physical_port;
+	/* attached_transcoder is for Gen11.5+. Set to zero for <Gen11.5 */
+	u8	attached_transcoder;
+	u8	reserved;
+} __packed;
+
+/*
+ * Data structures for integrated wired HDCP2 Tx in
+ * support of the AKE protocol
+ */
+/* HECI struct for integrated wired HDCP Tx session initiation. */
+struct wired_cmd_initiate_hdcp2_session_in {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+	u8			protocol; /* for HDMI vs DP */
+} __packed;
+
+struct wired_cmd_initiate_hdcp2_session_out {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+	u8			r_tx[HDCP_2_2_RTX_LEN];
+	struct hdcp2_tx_caps	tx_caps;
+} __packed;
+
+/* HECI struct for ending an integrated wired HDCP Tx session. */
+struct wired_cmd_close_session_in {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+} __packed;
+
+struct wired_cmd_close_session_out {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+} __packed;
+
+/* HECI struct for integrated wired HDCP Tx Rx Cert verification. */
+struct wired_cmd_verify_receiver_cert_in {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+	struct hdcp2_cert_rx	cert_rx;
+	u8			r_rx[HDCP_2_2_RRX_LEN];
+	u8			rx_caps[HDCP_2_2_RXCAPS_LEN];
+} __packed;
+
+struct wired_cmd_verify_receiver_cert_out {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+	u8			km_stored;
+	u8			reserved[3];
+	union encrypted_buff	ekm_buff;
+} __packed;
+
+/* HECI struct for verification of Rx's Hprime in a HDCP Tx session */
+struct wired_cmd_ake_send_hprime_in {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+	u8			h_prime[HDCP_2_2_H_PRIME_LEN];
+} __packed;
+
+struct wired_cmd_ake_send_hprime_out {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+} __packed;
+
+/*
+ * HECI struct for sending in AKE pairing data generated by the Rx in an
+ * integrated wired HDCP Tx session.
+ */
+struct wired_cmd_ake_send_pairing_info_in {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+	u8			e_kh_km[HDCP_2_2_E_KH_KM_LEN];
+} __packed;
+
+struct wired_cmd_ake_send_pairing_info_out {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+} __packed;
+
+/* Data structures for integrated wired HDCP2 Tx in support of the LC protocol*/
+/*
+ * HECI struct for initiating locality check with an
+ * integrated wired HDCP Tx session.
+ */
+struct wired_cmd_init_locality_check_in {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+} __packed;
+
+struct wired_cmd_init_locality_check_out {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+	u8			r_n[HDCP_2_2_RN_LEN];
+} __packed;
+
+/*
+ * HECI struct for validating an Rx's LPrime value in an
+ * integrated wired HDCP Tx session.
+ */
+struct wired_cmd_validate_locality_in {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+	u8			l_prime[HDCP_2_2_L_PRIME_LEN];
+} __packed;
+
+struct wired_cmd_validate_locality_out {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+} __packed;
+
+/*
+ * Data structures for integrated wired HDCP2 Tx in support of the
+ * SKE protocol
+ */
+/* HECI struct for creating session key */
+struct wired_cmd_get_session_key_in {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+} __packed;
+
+struct wired_cmd_get_session_key_out {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+	u8			e_dkey_ks[HDCP_2_2_E_DKEY_KS_LEN];
+	u8			r_iv[HDCP_2_2_RIV_LEN];
+} __packed;
+
+/* HECI struct for the Tx enable authentication command */
+struct wired_cmd_enable_auth_in {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+	u8			stream_type;
+} __packed;
+
+struct wired_cmd_enable_auth_out {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+} __packed;
+
+/*
+ * Data structures for integrated wired HDCP2 Tx in support of
+ * the repeater protocols
+ */
+/*
+ * HECI struct for verifying the downstream repeater's HDCP topology in an
+ * integrated wired HDCP Tx session.
+ */
+struct wired_cmd_verify_repeater_in {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+	u8			rx_info[HDCP_2_2_RXINFO_LEN];
+	u8			seq_num_v[HDCP_2_2_SEQ_NUM_LEN];
+	u8			v_prime[HDCP_2_2_V_PRIME_HALF_LEN];
+	u8			receiver_ids[HDCP_2_2_RECEIVER_IDS_MAX_LEN];
+} __packed;
+
+struct wired_cmd_verify_repeater_out {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+	u8			content_type_supported;
+	u8			v[HDCP_2_2_V_PRIME_HALF_LEN];
+} __packed;
+
+/*
+ * HECI struct in support of stream management in an
+ * integrated wired HDCP Tx session.
+ */
+struct wired_cmd_repeater_auth_stream_req_in {
+	struct hdcp_cmd_header		header;
+	struct hdcp_port_id		port;
+	u8				seq_num_m[HDCP_2_2_SEQ_NUM_LEN];
+	u8				m_prime[HDCP_2_2_MPRIME_LEN];
+	__be16				k;
+	struct hdcp2_streamid_type	streams[];
+} __packed;
+
+struct wired_cmd_repeater_auth_stream_req_out {
+	struct hdcp_cmd_header	header;
+	struct hdcp_port_id	port;
+} __packed;
+#endif /* __MEI_HDCP_H__ */