Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 3461 insertions, 0 deletions

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
new file mode 100644
index 000000000..97e32c049
--- /dev/null
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -0,0 +1,3461 @@
+/*
+ * AMD 10Gb Ethernet driver
+ *
+ * This file is available to you under your choice of the following two
+ * licenses:
+ *
+ * License 1: GPLv2
+ *
+ * Copyright (c) 2016 Advanced Micro Devices, Inc.
+ *
+ * This file is free software; you may copy, redistribute and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ *     The Synopsys DWC ETHER XGMAC Software Driver and documentation
+ *     (hereinafter "Software") is an unsupported proprietary work of Synopsys,
+ *     Inc. unless otherwise expressly agreed to in writing between Synopsys
+ *     and you.
+ *
+ *     The Software IS NOT an item of Licensed Software or Licensed Product
+ *     under any End User Software License Agreement or Agreement for Licensed
+ *     Product with Synopsys or any supplement thereto.  Permission is hereby
+ *     granted, free of charge, to any person obtaining a copy of this software
+ *     annotated with this license and the Software, to deal in the Software
+ *     without restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or sell copies
+ *     of the Software, and to permit persons to whom the Software is furnished
+ *     to do so, subject to the following conditions:
+ *
+ *     The above copyright notice and this permission notice shall be included
+ *     in all copies or substantial portions of the Software.
+ *
+ *     THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
+ *     BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ *     TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ *     PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS
+ *     BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ *     CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ *     SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ *     INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ *     ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ *     THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * License 2: Modified BSD
+ *
+ * Copyright (c) 2016 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ *     The Synopsys DWC ETHER XGMAC Software Driver and documentation
+ *     (hereinafter "Software") is an unsupported proprietary work of Synopsys,
+ *     Inc. unless otherwise expressly agreed to in writing between Synopsys
+ *     and you.
+ *
+ *     The Software IS NOT an item of Licensed Software or Licensed Product
+ *     under any End User Software License Agreement or Agreement for Licensed
+ *     Product with Synopsys or any supplement thereto.  Permission is hereby
+ *     granted, free of charge, to any person obtaining a copy of this software
+ *     annotated with this license and the Software, to deal in the Software
+ *     without restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or sell copies
+ *     of the Software, and to permit persons to whom the Software is furnished
+ *     to do so, subject to the following conditions:
+ *
+ *     The above copyright notice and this permission notice shall be included
+ *     in all copies or substantial portions of the Software.
+ *
+ *     THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
+ *     BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ *     TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ *     PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS
+ *     BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ *     CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ *     SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ *     INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ *     ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ *     THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/kmod.h>
+#include <linux/mdio.h>
+#include <linux/phy.h>
+#include <linux/ethtool.h>
+
+#include "xgbe.h"
+#include "xgbe-common.h"
+
+#define XGBE_PHY_PORT_SPEED_100		BIT(0)
+#define XGBE_PHY_PORT_SPEED_1000	BIT(1)
+#define XGBE_PHY_PORT_SPEED_2500	BIT(2)
+#define XGBE_PHY_PORT_SPEED_10000	BIT(3)
+
+#define XGBE_MUTEX_RELEASE		0x80000000
+
+#define XGBE_SFP_DIRECT			7
+
+/* I2C target addresses */
+#define XGBE_SFP_SERIAL_ID_ADDRESS	0x50
+#define XGBE_SFP_DIAG_INFO_ADDRESS	0x51
+#define XGBE_SFP_PHY_ADDRESS		0x56
+#define XGBE_GPIO_ADDRESS_PCA9555	0x20
+
+/* SFP sideband signal indicators */
+#define XGBE_GPIO_NO_TX_FAULT		BIT(0)
+#define XGBE_GPIO_NO_RATE_SELECT	BIT(1)
+#define XGBE_GPIO_NO_MOD_ABSENT		BIT(2)
+#define XGBE_GPIO_NO_RX_LOS		BIT(3)
+
+/* Rate-change complete wait/retry count */
+#define XGBE_RATECHANGE_COUNT		500
+
+/* CDR delay values for KR support (in usec) */
+#define XGBE_CDR_DELAY_INIT		10000
+#define XGBE_CDR_DELAY_INC		10000
+#define XGBE_CDR_DELAY_MAX		100000
+
+/* RRC frequency during link status check */
+#define XGBE_RRC_FREQUENCY		10
+
+enum xgbe_port_mode {
+	XGBE_PORT_MODE_RSVD = 0,
+	XGBE_PORT_MODE_BACKPLANE,
+	XGBE_PORT_MODE_BACKPLANE_2500,
+	XGBE_PORT_MODE_1000BASE_T,
+	XGBE_PORT_MODE_1000BASE_X,
+	XGBE_PORT_MODE_NBASE_T,
+	XGBE_PORT_MODE_10GBASE_T,
+	XGBE_PORT_MODE_10GBASE_R,
+	XGBE_PORT_MODE_SFP,
+	XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG,
+	XGBE_PORT_MODE_MAX,
+};
+
+enum xgbe_conn_type {
+	XGBE_CONN_TYPE_NONE = 0,
+	XGBE_CONN_TYPE_SFP,
+	XGBE_CONN_TYPE_MDIO,
+	XGBE_CONN_TYPE_RSVD1,
+	XGBE_CONN_TYPE_BACKPLANE,
+	XGBE_CONN_TYPE_MAX,
+};
+
+/* SFP/SFP+ related definitions */
+enum xgbe_sfp_comm {
+	XGBE_SFP_COMM_DIRECT = 0,
+	XGBE_SFP_COMM_PCA9545,
+};
+
+enum xgbe_sfp_cable {
+	XGBE_SFP_CABLE_UNKNOWN = 0,
+	XGBE_SFP_CABLE_ACTIVE,
+	XGBE_SFP_CABLE_PASSIVE,
+	XGBE_SFP_CABLE_FIBER,
+};
+
+enum xgbe_sfp_base {
+	XGBE_SFP_BASE_UNKNOWN = 0,
+	XGBE_SFP_BASE_1000_T,
+	XGBE_SFP_BASE_1000_SX,
+	XGBE_SFP_BASE_1000_LX,
+	XGBE_SFP_BASE_1000_CX,
+	XGBE_SFP_BASE_10000_SR,
+	XGBE_SFP_BASE_10000_LR,
+	XGBE_SFP_BASE_10000_LRM,
+	XGBE_SFP_BASE_10000_ER,
+	XGBE_SFP_BASE_10000_CR,
+};
+
+enum xgbe_sfp_speed {
+	XGBE_SFP_SPEED_UNKNOWN = 0,
+	XGBE_SFP_SPEED_100_1000,
+	XGBE_SFP_SPEED_1000,
+	XGBE_SFP_SPEED_10000,
+};
+
+/* SFP Serial ID Base ID values relative to an offset of 0 */
+#define XGBE_SFP_BASE_ID			0
+#define XGBE_SFP_ID_SFP				0x03
+
+#define XGBE_SFP_BASE_EXT_ID			1
+#define XGBE_SFP_EXT_ID_SFP			0x04
+
+#define XGBE_SFP_BASE_10GBE_CC			3
+#define XGBE_SFP_BASE_10GBE_CC_SR		BIT(4)
+#define XGBE_SFP_BASE_10GBE_CC_LR		BIT(5)
+#define XGBE_SFP_BASE_10GBE_CC_LRM		BIT(6)
+#define XGBE_SFP_BASE_10GBE_CC_ER		BIT(7)
+
+#define XGBE_SFP_BASE_1GBE_CC			6
+#define XGBE_SFP_BASE_1GBE_CC_SX		BIT(0)
+#define XGBE_SFP_BASE_1GBE_CC_LX		BIT(1)
+#define XGBE_SFP_BASE_1GBE_CC_CX		BIT(2)
+#define XGBE_SFP_BASE_1GBE_CC_T			BIT(3)
+
+#define XGBE_SFP_BASE_CABLE			8
+#define XGBE_SFP_BASE_CABLE_PASSIVE		BIT(2)
+#define XGBE_SFP_BASE_CABLE_ACTIVE		BIT(3)
+
+#define XGBE_SFP_BASE_BR			12
+#define XGBE_SFP_BASE_BR_1GBE_MIN		0x0a
+#define XGBE_SFP_BASE_BR_10GBE_MIN		0x64
+
+#define XGBE_SFP_BASE_CU_CABLE_LEN		18
+
+#define XGBE_SFP_BASE_VENDOR_NAME		20
+#define XGBE_SFP_BASE_VENDOR_NAME_LEN		16
+#define XGBE_SFP_BASE_VENDOR_PN			40
+#define XGBE_SFP_BASE_VENDOR_PN_LEN		16
+#define XGBE_SFP_BASE_VENDOR_REV		56
+#define XGBE_SFP_BASE_VENDOR_REV_LEN		4
+
+#define XGBE_SFP_BASE_CC			63
+
+/* SFP Serial ID Extended ID values relative to an offset of 64 */
+#define XGBE_SFP_BASE_VENDOR_SN			4
+#define XGBE_SFP_BASE_VENDOR_SN_LEN		16
+
+#define XGBE_SFP_EXTD_OPT1			1
+#define XGBE_SFP_EXTD_OPT1_RX_LOS		BIT(1)
+#define XGBE_SFP_EXTD_OPT1_TX_FAULT		BIT(3)
+
+#define XGBE_SFP_EXTD_DIAG			28
+#define XGBE_SFP_EXTD_DIAG_ADDR_CHANGE		BIT(2)
+
+#define XGBE_SFP_EXTD_SFF_8472			30
+
+#define XGBE_SFP_EXTD_CC			31
+
+struct xgbe_sfp_eeprom {
+	u8 base[64];
+	u8 extd[32];
+	u8 vendor[32];
+};
+
+#define XGBE_SFP_DIAGS_SUPPORTED(_x)			\
+	((_x)->extd[XGBE_SFP_EXTD_SFF_8472] &&		\
+	 !((_x)->extd[XGBE_SFP_EXTD_DIAG] & XGBE_SFP_EXTD_DIAG_ADDR_CHANGE))
+
+#define XGBE_SFP_EEPROM_BASE_LEN	256
+#define XGBE_SFP_EEPROM_DIAG_LEN	256
+#define XGBE_SFP_EEPROM_MAX		(XGBE_SFP_EEPROM_BASE_LEN +	\
+					 XGBE_SFP_EEPROM_DIAG_LEN)
+
+#define XGBE_BEL_FUSE_VENDOR	"BEL-FUSE        "
+#define XGBE_BEL_FUSE_PARTNO	"1GBT-SFP06      "
+
+#define XGBE_MOLEX_VENDOR	"Molex Inc.      "
+
+struct xgbe_sfp_ascii {
+	union {
+		char vendor[XGBE_SFP_BASE_VENDOR_NAME_LEN + 1];
+		char partno[XGBE_SFP_BASE_VENDOR_PN_LEN + 1];
+		char rev[XGBE_SFP_BASE_VENDOR_REV_LEN + 1];
+		char serno[XGBE_SFP_BASE_VENDOR_SN_LEN + 1];
+	} u;
+};
+
+/* MDIO PHY reset types */
+enum xgbe_mdio_reset {
+	XGBE_MDIO_RESET_NONE = 0,
+	XGBE_MDIO_RESET_I2C_GPIO,
+	XGBE_MDIO_RESET_INT_GPIO,
+	XGBE_MDIO_RESET_MAX,
+};
+
+/* Re-driver related definitions */
+enum xgbe_phy_redrv_if {
+	XGBE_PHY_REDRV_IF_MDIO = 0,
+	XGBE_PHY_REDRV_IF_I2C,
+	XGBE_PHY_REDRV_IF_MAX,
+};
+
+enum xgbe_phy_redrv_model {
+	XGBE_PHY_REDRV_MODEL_4223 = 0,
+	XGBE_PHY_REDRV_MODEL_4227,
+	XGBE_PHY_REDRV_MODEL_MAX,
+};
+
+enum xgbe_phy_redrv_mode {
+	XGBE_PHY_REDRV_MODE_CX = 5,
+	XGBE_PHY_REDRV_MODE_SR = 9,
+};
+
+#define XGBE_PHY_REDRV_MODE_REG	0x12b0
+
+/* PHY related configuration information */
+struct xgbe_phy_data {
+	enum xgbe_port_mode port_mode;
+
+	unsigned int port_id;
+
+	unsigned int port_speeds;
+
+	enum xgbe_conn_type conn_type;
+
+	enum xgbe_mode cur_mode;
+	enum xgbe_mode start_mode;
+
+	unsigned int rrc_count;
+
+	unsigned int mdio_addr;
+
+	/* SFP Support */
+	enum xgbe_sfp_comm sfp_comm;
+	unsigned int sfp_mux_address;
+	unsigned int sfp_mux_channel;
+
+	unsigned int sfp_gpio_address;
+	unsigned int sfp_gpio_mask;
+	unsigned int sfp_gpio_inputs;
+	unsigned int sfp_gpio_rx_los;
+	unsigned int sfp_gpio_tx_fault;
+	unsigned int sfp_gpio_mod_absent;
+	unsigned int sfp_gpio_rate_select;
+
+	unsigned int sfp_rx_los;
+	unsigned int sfp_tx_fault;
+	unsigned int sfp_mod_absent;
+	unsigned int sfp_changed;
+	unsigned int sfp_phy_avail;
+	unsigned int sfp_cable_len;
+	enum xgbe_sfp_base sfp_base;
+	enum xgbe_sfp_cable sfp_cable;
+	enum xgbe_sfp_speed sfp_speed;
+	struct xgbe_sfp_eeprom sfp_eeprom;
+
+	/* External PHY support */
+	enum xgbe_mdio_mode phydev_mode;
+	struct mii_bus *mii;
+	struct phy_device *phydev;
+	enum xgbe_mdio_reset mdio_reset;
+	unsigned int mdio_reset_addr;
+	unsigned int mdio_reset_gpio;
+
+	/* Re-driver support */
+	unsigned int redrv;
+	unsigned int redrv_if;
+	unsigned int redrv_addr;
+	unsigned int redrv_lane;
+	unsigned int redrv_model;
+
+	/* KR AN support */
+	unsigned int phy_cdr_notrack;
+	unsigned int phy_cdr_delay;
+};
+
+/* I2C, MDIO and GPIO lines are muxed, so only one device at a time */
+static DEFINE_MUTEX(xgbe_phy_comm_lock);
+
+static enum xgbe_an_mode xgbe_phy_an_mode(struct xgbe_prv_data *pdata);
+
+static int xgbe_phy_i2c_xfer(struct xgbe_prv_data *pdata,
+			     struct xgbe_i2c_op *i2c_op)
+{
+	return pdata->i2c_if.i2c_xfer(pdata, i2c_op);
+}
+
+static int xgbe_phy_redrv_write(struct xgbe_prv_data *pdata, unsigned int reg,
+				unsigned int val)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	struct xgbe_i2c_op i2c_op;
+	__be16 *redrv_val;
+	u8 redrv_data[5], csum;
+	unsigned int i, retry;
+	int ret;
+
+	/* High byte of register contains read/write indicator */
+	redrv_data[0] = ((reg >> 8) & 0xff) << 1;
+	redrv_data[1] = reg & 0xff;
+	redrv_val = (__be16 *)&redrv_data[2];
+	*redrv_val = cpu_to_be16(val);
+
+	/* Calculate 1 byte checksum */
+	csum = 0;
+	for (i = 0; i < 4; i++) {
+		csum += redrv_data[i];
+		if (redrv_data[i] > csum)
+			csum++;
+	}
+	redrv_data[4] = ~csum;
+
+	retry = 1;
+again1:
+	i2c_op.cmd = XGBE_I2C_CMD_WRITE;
+	i2c_op.target = phy_data->redrv_addr;
+	i2c_op.len = sizeof(redrv_data);
+	i2c_op.buf = redrv_data;
+	ret = xgbe_phy_i2c_xfer(pdata, &i2c_op);
+	if (ret) {
+		if ((ret == -EAGAIN) && retry--)
+			goto again1;
+
+		return ret;
+	}
+
+	retry = 1;
+again2:
+	i2c_op.cmd = XGBE_I2C_CMD_READ;
+	i2c_op.target = phy_data->redrv_addr;
+	i2c_op.len = 1;
+	i2c_op.buf = redrv_data;
+	ret = xgbe_phy_i2c_xfer(pdata, &i2c_op);
+	if (ret) {
+		if ((ret == -EAGAIN) && retry--)
+			goto again2;
+
+		return ret;
+	}
+
+	if (redrv_data[0] != 0xff) {
+		netif_dbg(pdata, drv, pdata->netdev,
+			  "Redriver write checksum error\n");
+		ret = -EIO;
+	}
+
+	return ret;
+}
+
+static int xgbe_phy_i2c_write(struct xgbe_prv_data *pdata, unsigned int target,
+			      void *val, unsigned int val_len)
+{
+	struct xgbe_i2c_op i2c_op;
+	int retry, ret;
+
+	retry = 1;
+again:
+	/* Write the specfied register */
+	i2c_op.cmd = XGBE_I2C_CMD_WRITE;
+	i2c_op.target = target;
+	i2c_op.len = val_len;
+	i2c_op.buf = val;
+	ret = xgbe_phy_i2c_xfer(pdata, &i2c_op);
+	if ((ret == -EAGAIN) && retry--)
+		goto again;
+
+	return ret;
+}
+
+static int xgbe_phy_i2c_read(struct xgbe_prv_data *pdata, unsigned int target,
+			     void *reg, unsigned int reg_len,
+			     void *val, unsigned int val_len)
+{
+	struct xgbe_i2c_op i2c_op;
+	int retry, ret;
+
+	retry = 1;
+again1:
+	/* Set the specified register to read */
+	i2c_op.cmd = XGBE_I2C_CMD_WRITE;
+	i2c_op.target = target;
+	i2c_op.len = reg_len;
+	i2c_op.buf = reg;
+	ret = xgbe_phy_i2c_xfer(pdata, &i2c_op);
+	if (ret) {
+		if ((ret == -EAGAIN) && retry--)
+			goto again1;
+
+		return ret;
+	}
+
+	retry = 1;
+again2:
+	/* Read the specfied register */
+	i2c_op.cmd = XGBE_I2C_CMD_READ;
+	i2c_op.target = target;
+	i2c_op.len = val_len;
+	i2c_op.buf = val;
+	ret = xgbe_phy_i2c_xfer(pdata, &i2c_op);
+	if ((ret == -EAGAIN) && retry--)
+		goto again2;
+
+	return ret;
+}
+
+static int xgbe_phy_sfp_put_mux(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	struct xgbe_i2c_op i2c_op;
+	u8 mux_channel;
+
+	if (phy_data->sfp_comm == XGBE_SFP_COMM_DIRECT)
+		return 0;
+
+	/* Select no mux channels */
+	mux_channel = 0;
+	i2c_op.cmd = XGBE_I2C_CMD_WRITE;
+	i2c_op.target = phy_data->sfp_mux_address;
+	i2c_op.len = sizeof(mux_channel);
+	i2c_op.buf = &mux_channel;
+
+	return xgbe_phy_i2c_xfer(pdata, &i2c_op);
+}
+
+static int xgbe_phy_sfp_get_mux(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	struct xgbe_i2c_op i2c_op;
+	u8 mux_channel;
+
+	if (phy_data->sfp_comm == XGBE_SFP_COMM_DIRECT)
+		return 0;
+
+	/* Select desired mux channel */
+	mux_channel = 1 << phy_data->sfp_mux_channel;
+	i2c_op.cmd = XGBE_I2C_CMD_WRITE;
+	i2c_op.target = phy_data->sfp_mux_address;
+	i2c_op.len = sizeof(mux_channel);
+	i2c_op.buf = &mux_channel;
+
+	return xgbe_phy_i2c_xfer(pdata, &i2c_op);
+}
+
+static void xgbe_phy_put_comm_ownership(struct xgbe_prv_data *pdata)
+{
+	mutex_unlock(&xgbe_phy_comm_lock);
+}
+
+static int xgbe_phy_get_comm_ownership(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	unsigned long timeout;
+	unsigned int mutex_id;
+
+	/* The I2C and MDIO/GPIO bus is multiplexed between multiple devices,
+	 * the driver needs to take the software mutex and then the hardware
+	 * mutexes before being able to use the busses.
+	 */
+	mutex_lock(&xgbe_phy_comm_lock);
+
+	/* Clear the mutexes */
+	XP_IOWRITE(pdata, XP_I2C_MUTEX, XGBE_MUTEX_RELEASE);
+	XP_IOWRITE(pdata, XP_MDIO_MUTEX, XGBE_MUTEX_RELEASE);
+
+	/* Mutex formats are the same for I2C and MDIO/GPIO */
+	mutex_id = 0;
+	XP_SET_BITS(mutex_id, XP_I2C_MUTEX, ID, phy_data->port_id);
+	XP_SET_BITS(mutex_id, XP_I2C_MUTEX, ACTIVE, 1);
+
+	timeout = jiffies + (5 * HZ);
+	while (time_before(jiffies, timeout)) {
+		/* Must be all zeroes in order to obtain the mutex */
+		if (XP_IOREAD(pdata, XP_I2C_MUTEX) ||
+		    XP_IOREAD(pdata, XP_MDIO_MUTEX)) {
+			usleep_range(100, 200);
+			continue;
+		}
+
+		/* Obtain the mutex */
+		XP_IOWRITE(pdata, XP_I2C_MUTEX, mutex_id);
+		XP_IOWRITE(pdata, XP_MDIO_MUTEX, mutex_id);
+
+		return 0;
+	}
+
+	mutex_unlock(&xgbe_phy_comm_lock);
+
+	netdev_err(pdata->netdev, "unable to obtain hardware mutexes\n");
+
+	return -ETIMEDOUT;
+}
+
+static int xgbe_phy_mdio_mii_write(struct xgbe_prv_data *pdata, int addr,
+				   int reg, u16 val)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	if (reg & MII_ADDR_C45) {
+		if (phy_data->phydev_mode != XGBE_MDIO_MODE_CL45)
+			return -ENOTSUPP;
+	} else {
+		if (phy_data->phydev_mode != XGBE_MDIO_MODE_CL22)
+			return -ENOTSUPP;
+	}
+
+	return pdata->hw_if.write_ext_mii_regs(pdata, addr, reg, val);
+}
+
+static int xgbe_phy_i2c_mii_write(struct xgbe_prv_data *pdata, int reg, u16 val)
+{
+	__be16 *mii_val;
+	u8 mii_data[3];
+	int ret;
+
+	ret = xgbe_phy_sfp_get_mux(pdata);
+	if (ret)
+		return ret;
+
+	mii_data[0] = reg & 0xff;
+	mii_val = (__be16 *)&mii_data[1];
+	*mii_val = cpu_to_be16(val);
+
+	ret = xgbe_phy_i2c_write(pdata, XGBE_SFP_PHY_ADDRESS,
+				 mii_data, sizeof(mii_data));
+
+	xgbe_phy_sfp_put_mux(pdata);
+
+	return ret;
+}
+
+static int xgbe_phy_mii_write(struct mii_bus *mii, int addr, int reg, u16 val)
+{
+	struct xgbe_prv_data *pdata = mii->priv;
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	int ret;
+
+	ret = xgbe_phy_get_comm_ownership(pdata);
+	if (ret)
+		return ret;
+
+	if (phy_data->conn_type == XGBE_CONN_TYPE_SFP)
+		ret = xgbe_phy_i2c_mii_write(pdata, reg, val);
+	else if (phy_data->conn_type & XGBE_CONN_TYPE_MDIO)
+		ret = xgbe_phy_mdio_mii_write(pdata, addr, reg, val);
+	else
+		ret = -ENOTSUPP;
+
+	xgbe_phy_put_comm_ownership(pdata);
+
+	return ret;
+}
+
+static int xgbe_phy_mdio_mii_read(struct xgbe_prv_data *pdata, int addr,
+				  int reg)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	if (reg & MII_ADDR_C45) {
+		if (phy_data->phydev_mode != XGBE_MDIO_MODE_CL45)
+			return -ENOTSUPP;
+	} else {
+		if (phy_data->phydev_mode != XGBE_MDIO_MODE_CL22)
+			return -ENOTSUPP;
+	}
+
+	return pdata->hw_if.read_ext_mii_regs(pdata, addr, reg);
+}
+
+static int xgbe_phy_i2c_mii_read(struct xgbe_prv_data *pdata, int reg)
+{
+	__be16 mii_val;
+	u8 mii_reg;
+	int ret;
+
+	ret = xgbe_phy_sfp_get_mux(pdata);
+	if (ret)
+		return ret;
+
+	mii_reg = reg;
+	ret = xgbe_phy_i2c_read(pdata, XGBE_SFP_PHY_ADDRESS,
+				&mii_reg, sizeof(mii_reg),
+				&mii_val, sizeof(mii_val));
+	if (!ret)
+		ret = be16_to_cpu(mii_val);
+
+	xgbe_phy_sfp_put_mux(pdata);
+
+	return ret;
+}
+
+static int xgbe_phy_mii_read(struct mii_bus *mii, int addr, int reg)
+{
+	struct xgbe_prv_data *pdata = mii->priv;
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	int ret;
+
+	ret = xgbe_phy_get_comm_ownership(pdata);
+	if (ret)
+		return ret;
+
+	if (phy_data->conn_type == XGBE_CONN_TYPE_SFP)
+		ret = xgbe_phy_i2c_mii_read(pdata, reg);
+	else if (phy_data->conn_type & XGBE_CONN_TYPE_MDIO)
+		ret = xgbe_phy_mdio_mii_read(pdata, addr, reg);
+	else
+		ret = -ENOTSUPP;
+
+	xgbe_phy_put_comm_ownership(pdata);
+
+	return ret;
+}
+
+static void xgbe_phy_sfp_phy_settings(struct xgbe_prv_data *pdata)
+{
+	struct ethtool_link_ksettings *lks = &pdata->phy.lks;
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	if (!phy_data->sfp_mod_absent && !phy_data->sfp_changed)
+		return;
+
+	XGBE_ZERO_SUP(lks);
+
+	if (phy_data->sfp_mod_absent) {
+		pdata->phy.speed = SPEED_UNKNOWN;
+		pdata->phy.duplex = DUPLEX_UNKNOWN;
+		pdata->phy.autoneg = AUTONEG_ENABLE;
+		pdata->phy.pause_autoneg = AUTONEG_ENABLE;
+
+		XGBE_SET_SUP(lks, Autoneg);
+		XGBE_SET_SUP(lks, Pause);
+		XGBE_SET_SUP(lks, Asym_Pause);
+		XGBE_SET_SUP(lks, TP);
+		XGBE_SET_SUP(lks, FIBRE);
+
+		XGBE_LM_COPY(lks, advertising, lks, supported);
+
+		return;
+	}
+
+	switch (phy_data->sfp_base) {
+	case XGBE_SFP_BASE_1000_T:
+	case XGBE_SFP_BASE_1000_SX:
+	case XGBE_SFP_BASE_1000_LX:
+	case XGBE_SFP_BASE_1000_CX:
+		pdata->phy.speed = SPEED_UNKNOWN;
+		pdata->phy.duplex = DUPLEX_UNKNOWN;
+		pdata->phy.autoneg = AUTONEG_ENABLE;
+		pdata->phy.pause_autoneg = AUTONEG_ENABLE;
+		XGBE_SET_SUP(lks, Autoneg);
+		XGBE_SET_SUP(lks, Pause);
+		XGBE_SET_SUP(lks, Asym_Pause);
+		if (phy_data->sfp_base == XGBE_SFP_BASE_1000_T) {
+			if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_100)
+				XGBE_SET_SUP(lks, 100baseT_Full);
+			if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000)
+				XGBE_SET_SUP(lks, 1000baseT_Full);
+		} else {
+			if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000)
+				XGBE_SET_SUP(lks, 1000baseX_Full);
+		}
+		break;
+	case XGBE_SFP_BASE_10000_SR:
+	case XGBE_SFP_BASE_10000_LR:
+	case XGBE_SFP_BASE_10000_LRM:
+	case XGBE_SFP_BASE_10000_ER:
+	case XGBE_SFP_BASE_10000_CR:
+		pdata->phy.speed = SPEED_10000;
+		pdata->phy.duplex = DUPLEX_FULL;
+		pdata->phy.autoneg = AUTONEG_DISABLE;
+		pdata->phy.pause_autoneg = AUTONEG_DISABLE;
+		if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_10000) {
+			switch (phy_data->sfp_base) {
+			case XGBE_SFP_BASE_10000_SR:
+				XGBE_SET_SUP(lks, 10000baseSR_Full);
+				break;
+			case XGBE_SFP_BASE_10000_LR:
+				XGBE_SET_SUP(lks, 10000baseLR_Full);
+				break;
+			case XGBE_SFP_BASE_10000_LRM:
+				XGBE_SET_SUP(lks, 10000baseLRM_Full);
+				break;
+			case XGBE_SFP_BASE_10000_ER:
+				XGBE_SET_SUP(lks, 10000baseER_Full);
+				break;
+			case XGBE_SFP_BASE_10000_CR:
+				XGBE_SET_SUP(lks, 10000baseCR_Full);
+				break;
+			default:
+				break;
+			}
+		}
+		break;
+	default:
+		pdata->phy.speed = SPEED_UNKNOWN;
+		pdata->phy.duplex = DUPLEX_UNKNOWN;
+		pdata->phy.autoneg = AUTONEG_DISABLE;
+		pdata->phy.pause_autoneg = AUTONEG_DISABLE;
+		break;
+	}
+
+	switch (phy_data->sfp_base) {
+	case XGBE_SFP_BASE_1000_T:
+	case XGBE_SFP_BASE_1000_CX:
+	case XGBE_SFP_BASE_10000_CR:
+		XGBE_SET_SUP(lks, TP);
+		break;
+	default:
+		XGBE_SET_SUP(lks, FIBRE);
+		break;
+	}
+
+	XGBE_LM_COPY(lks, advertising, lks, supported);
+}
+
+static bool xgbe_phy_sfp_bit_rate(struct xgbe_sfp_eeprom *sfp_eeprom,
+				  enum xgbe_sfp_speed sfp_speed)
+{
+	u8 *sfp_base, min;
+
+	sfp_base = sfp_eeprom->base;
+
+	switch (sfp_speed) {
+	case XGBE_SFP_SPEED_1000:
+		min = XGBE_SFP_BASE_BR_1GBE_MIN;
+		break;
+	case XGBE_SFP_SPEED_10000:
+		min = XGBE_SFP_BASE_BR_10GBE_MIN;
+		break;
+	default:
+		return false;
+	}
+
+	return sfp_base[XGBE_SFP_BASE_BR] >= min;
+}
+
+static void xgbe_phy_free_phy_device(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	if (phy_data->phydev) {
+		phy_detach(phy_data->phydev);
+		phy_device_remove(phy_data->phydev);
+		phy_device_free(phy_data->phydev);
+		phy_data->phydev = NULL;
+	}
+}
+
+static bool xgbe_phy_finisar_phy_quirks(struct xgbe_prv_data *pdata)
+{
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, };
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	unsigned int phy_id = phy_data->phydev->phy_id;
+
+	if (phy_data->port_mode != XGBE_PORT_MODE_SFP)
+		return false;
+
+	if ((phy_id & 0xfffffff0) != 0x01ff0cc0)
+		return false;
+
+	/* Enable Base-T AN */
+	phy_write(phy_data->phydev, 0x16, 0x0001);
+	phy_write(phy_data->phydev, 0x00, 0x9140);
+	phy_write(phy_data->phydev, 0x16, 0x0000);
+
+	/* Enable SGMII at 100Base-T/1000Base-T Full Duplex */
+	phy_write(phy_data->phydev, 0x1b, 0x9084);
+	phy_write(phy_data->phydev, 0x09, 0x0e00);
+	phy_write(phy_data->phydev, 0x00, 0x8140);
+	phy_write(phy_data->phydev, 0x04, 0x0d01);
+	phy_write(phy_data->phydev, 0x00, 0x9140);
+
+	linkmode_set_bit_array(phy_10_100_features_array,
+			       ARRAY_SIZE(phy_10_100_features_array),
+			       supported);
+	linkmode_set_bit_array(phy_gbit_features_array,
+			       ARRAY_SIZE(phy_gbit_features_array),
+			       supported);
+
+	linkmode_copy(phy_data->phydev->supported, supported);
+
+	phy_support_asym_pause(phy_data->phydev);
+
+	netif_dbg(pdata, drv, pdata->netdev,
+		  "Finisar PHY quirk in place\n");
+
+	return true;
+}
+
+static bool xgbe_phy_belfuse_phy_quirks(struct xgbe_prv_data *pdata)
+{
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, };
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	struct xgbe_sfp_eeprom *sfp_eeprom = &phy_data->sfp_eeprom;
+	unsigned int phy_id = phy_data->phydev->phy_id;
+	int reg;
+
+	if (phy_data->port_mode != XGBE_PORT_MODE_SFP)
+		return false;
+
+	if (memcmp(&sfp_eeprom->base[XGBE_SFP_BASE_VENDOR_NAME],
+		   XGBE_BEL_FUSE_VENDOR, XGBE_SFP_BASE_VENDOR_NAME_LEN))
+		return false;
+
+	/* For Bel-Fuse, use the extra AN flag */
+	pdata->an_again = 1;
+
+	if (memcmp(&sfp_eeprom->base[XGBE_SFP_BASE_VENDOR_PN],
+		   XGBE_BEL_FUSE_PARTNO, XGBE_SFP_BASE_VENDOR_PN_LEN))
+		return false;
+
+	if ((phy_id & 0xfffffff0) != 0x03625d10)
+		return false;
+
+	/* Reset PHY - wait for self-clearing reset bit to clear */
+	genphy_soft_reset(phy_data->phydev);
+
+	/* Disable RGMII mode */
+	phy_write(phy_data->phydev, 0x18, 0x7007);
+	reg = phy_read(phy_data->phydev, 0x18);
+	phy_write(phy_data->phydev, 0x18, reg & ~0x0080);
+
+	/* Enable fiber register bank */
+	phy_write(phy_data->phydev, 0x1c, 0x7c00);
+	reg = phy_read(phy_data->phydev, 0x1c);
+	reg &= 0x03ff;
+	reg &= ~0x0001;
+	phy_write(phy_data->phydev, 0x1c, 0x8000 | 0x7c00 | reg | 0x0001);
+
+	/* Power down SerDes */
+	reg = phy_read(phy_data->phydev, 0x00);
+	phy_write(phy_data->phydev, 0x00, reg | 0x00800);
+
+	/* Configure SGMII-to-Copper mode */
+	phy_write(phy_data->phydev, 0x1c, 0x7c00);
+	reg = phy_read(phy_data->phydev, 0x1c);
+	reg &= 0x03ff;
+	reg &= ~0x0006;
+	phy_write(phy_data->phydev, 0x1c, 0x8000 | 0x7c00 | reg | 0x0004);
+
+	/* Power up SerDes */
+	reg = phy_read(phy_data->phydev, 0x00);
+	phy_write(phy_data->phydev, 0x00, reg & ~0x00800);
+
+	/* Enable copper register bank */
+	phy_write(phy_data->phydev, 0x1c, 0x7c00);
+	reg = phy_read(phy_data->phydev, 0x1c);
+	reg &= 0x03ff;
+	reg &= ~0x0001;
+	phy_write(phy_data->phydev, 0x1c, 0x8000 | 0x7c00 | reg);
+
+	/* Power up SerDes */
+	reg = phy_read(phy_data->phydev, 0x00);
+	phy_write(phy_data->phydev, 0x00, reg & ~0x00800);
+
+	linkmode_set_bit_array(phy_10_100_features_array,
+			       ARRAY_SIZE(phy_10_100_features_array),
+			       supported);
+	linkmode_set_bit_array(phy_gbit_features_array,
+			       ARRAY_SIZE(phy_gbit_features_array),
+			       supported);
+	linkmode_copy(phy_data->phydev->supported, supported);
+	phy_support_asym_pause(phy_data->phydev);
+
+	netif_dbg(pdata, drv, pdata->netdev,
+		  "BelFuse PHY quirk in place\n");
+
+	return true;
+}
+
+static void xgbe_phy_external_phy_quirks(struct xgbe_prv_data *pdata)
+{
+	if (xgbe_phy_belfuse_phy_quirks(pdata))
+		return;
+
+	if (xgbe_phy_finisar_phy_quirks(pdata))
+		return;
+}
+
+static int xgbe_phy_find_phy_device(struct xgbe_prv_data *pdata)
+{
+	struct ethtool_link_ksettings *lks = &pdata->phy.lks;
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	struct phy_device *phydev;
+	int ret;
+
+	/* If we already have a PHY, just return */
+	if (phy_data->phydev)
+		return 0;
+
+	/* Clear the extra AN flag */
+	pdata->an_again = 0;
+
+	/* Check for the use of an external PHY */
+	if (phy_data->phydev_mode == XGBE_MDIO_MODE_NONE)
+		return 0;
+
+	/* For SFP, only use an external PHY if available */
+	if ((phy_data->port_mode == XGBE_PORT_MODE_SFP) &&
+	    !phy_data->sfp_phy_avail)
+		return 0;
+
+	/* Set the proper MDIO mode for the PHY */
+	ret = pdata->hw_if.set_ext_mii_mode(pdata, phy_data->mdio_addr,
+					    phy_data->phydev_mode);
+	if (ret) {
+		netdev_err(pdata->netdev,
+			   "mdio port/clause not compatible (%u/%u)\n",
+			   phy_data->mdio_addr, phy_data->phydev_mode);
+		return ret;
+	}
+
+	/* Create and connect to the PHY device */
+	phydev = get_phy_device(phy_data->mii, phy_data->mdio_addr,
+				(phy_data->phydev_mode == XGBE_MDIO_MODE_CL45));
+	if (IS_ERR(phydev)) {
+		netdev_err(pdata->netdev, "get_phy_device failed\n");
+		return -ENODEV;
+	}
+	netif_dbg(pdata, drv, pdata->netdev, "external PHY id is %#010x\n",
+		  phydev->phy_id);
+
+	/*TODO: If c45, add request_module based on one of the MMD ids? */
+
+	ret = phy_device_register(phydev);
+	if (ret) {
+		netdev_err(pdata->netdev, "phy_device_register failed\n");
+		phy_device_free(phydev);
+		return ret;
+	}
+
+	ret = phy_attach_direct(pdata->netdev, phydev, phydev->dev_flags,
+				PHY_INTERFACE_MODE_SGMII);
+	if (ret) {
+		netdev_err(pdata->netdev, "phy_attach_direct failed\n");
+		phy_device_remove(phydev);
+		phy_device_free(phydev);
+		return ret;
+	}
+	phy_data->phydev = phydev;
+
+	xgbe_phy_external_phy_quirks(pdata);
+
+	linkmode_and(phydev->advertising, phydev->advertising,
+		     lks->link_modes.advertising);
+
+	phy_start_aneg(phy_data->phydev);
+
+	return 0;
+}
+
+static void xgbe_phy_sfp_external_phy(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	int ret;
+
+	if (!phy_data->sfp_changed)
+		return;
+
+	phy_data->sfp_phy_avail = 0;
+
+	if (phy_data->sfp_base != XGBE_SFP_BASE_1000_T)
+		return;
+
+	/* Check access to the PHY by reading CTRL1 */
+	ret = xgbe_phy_i2c_mii_read(pdata, MII_BMCR);
+	if (ret < 0)
+		return;
+
+	/* Successfully accessed the PHY */
+	phy_data->sfp_phy_avail = 1;
+}
+
+static bool xgbe_phy_check_sfp_rx_los(struct xgbe_phy_data *phy_data)
+{
+	u8 *sfp_extd = phy_data->sfp_eeprom.extd;
+
+	if (!(sfp_extd[XGBE_SFP_EXTD_OPT1] & XGBE_SFP_EXTD_OPT1_RX_LOS))
+		return false;
+
+	if (phy_data->sfp_gpio_mask & XGBE_GPIO_NO_RX_LOS)
+		return false;
+
+	if (phy_data->sfp_gpio_inputs & (1 << phy_data->sfp_gpio_rx_los))
+		return true;
+
+	return false;
+}
+
+static bool xgbe_phy_check_sfp_tx_fault(struct xgbe_phy_data *phy_data)
+{
+	u8 *sfp_extd = phy_data->sfp_eeprom.extd;
+
+	if (!(sfp_extd[XGBE_SFP_EXTD_OPT1] & XGBE_SFP_EXTD_OPT1_TX_FAULT))
+		return false;
+
+	if (phy_data->sfp_gpio_mask & XGBE_GPIO_NO_TX_FAULT)
+		return false;
+
+	if (phy_data->sfp_gpio_inputs & (1 << phy_data->sfp_gpio_tx_fault))
+		return true;
+
+	return false;
+}
+
+static bool xgbe_phy_check_sfp_mod_absent(struct xgbe_phy_data *phy_data)
+{
+	if (phy_data->sfp_gpio_mask & XGBE_GPIO_NO_MOD_ABSENT)
+		return false;
+
+	if (phy_data->sfp_gpio_inputs & (1 << phy_data->sfp_gpio_mod_absent))
+		return true;
+
+	return false;
+}
+
+static void xgbe_phy_sfp_parse_eeprom(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	struct xgbe_sfp_eeprom *sfp_eeprom = &phy_data->sfp_eeprom;
+	u8 *sfp_base;
+
+	sfp_base = sfp_eeprom->base;
+
+	if (sfp_base[XGBE_SFP_BASE_ID] != XGBE_SFP_ID_SFP)
+		return;
+
+	if (sfp_base[XGBE_SFP_BASE_EXT_ID] != XGBE_SFP_EXT_ID_SFP)
+		return;
+
+	/* Update transceiver signals (eeprom extd/options) */
+	phy_data->sfp_tx_fault = xgbe_phy_check_sfp_tx_fault(phy_data);
+	phy_data->sfp_rx_los = xgbe_phy_check_sfp_rx_los(phy_data);
+
+	/* Assume FIBER cable unless told otherwise */
+	if (sfp_base[XGBE_SFP_BASE_CABLE] & XGBE_SFP_BASE_CABLE_PASSIVE) {
+		phy_data->sfp_cable = XGBE_SFP_CABLE_PASSIVE;
+		phy_data->sfp_cable_len = sfp_base[XGBE_SFP_BASE_CU_CABLE_LEN];
+	} else if (sfp_base[XGBE_SFP_BASE_CABLE] & XGBE_SFP_BASE_CABLE_ACTIVE) {
+		phy_data->sfp_cable = XGBE_SFP_CABLE_ACTIVE;
+	} else {
+		phy_data->sfp_cable = XGBE_SFP_CABLE_FIBER;
+	}
+
+	/* Determine the type of SFP */
+	if (phy_data->sfp_cable != XGBE_SFP_CABLE_FIBER &&
+	    xgbe_phy_sfp_bit_rate(sfp_eeprom, XGBE_SFP_SPEED_10000))
+		phy_data->sfp_base = XGBE_SFP_BASE_10000_CR;
+	else if (sfp_base[XGBE_SFP_BASE_10GBE_CC] & XGBE_SFP_BASE_10GBE_CC_SR)
+		phy_data->sfp_base = XGBE_SFP_BASE_10000_SR;
+	else if (sfp_base[XGBE_SFP_BASE_10GBE_CC] & XGBE_SFP_BASE_10GBE_CC_LR)
+		phy_data->sfp_base = XGBE_SFP_BASE_10000_LR;
+	else if (sfp_base[XGBE_SFP_BASE_10GBE_CC] & XGBE_SFP_BASE_10GBE_CC_LRM)
+		phy_data->sfp_base = XGBE_SFP_BASE_10000_LRM;
+	else if (sfp_base[XGBE_SFP_BASE_10GBE_CC] & XGBE_SFP_BASE_10GBE_CC_ER)
+		phy_data->sfp_base = XGBE_SFP_BASE_10000_ER;
+	else if (sfp_base[XGBE_SFP_BASE_1GBE_CC] & XGBE_SFP_BASE_1GBE_CC_SX)
+		phy_data->sfp_base = XGBE_SFP_BASE_1000_SX;
+	else if (sfp_base[XGBE_SFP_BASE_1GBE_CC] & XGBE_SFP_BASE_1GBE_CC_LX)
+		phy_data->sfp_base = XGBE_SFP_BASE_1000_LX;
+	else if (sfp_base[XGBE_SFP_BASE_1GBE_CC] & XGBE_SFP_BASE_1GBE_CC_CX)
+		phy_data->sfp_base = XGBE_SFP_BASE_1000_CX;
+	else if (sfp_base[XGBE_SFP_BASE_1GBE_CC] & XGBE_SFP_BASE_1GBE_CC_T)
+		phy_data->sfp_base = XGBE_SFP_BASE_1000_T;
+
+	switch (phy_data->sfp_base) {
+	case XGBE_SFP_BASE_1000_T:
+		phy_data->sfp_speed = XGBE_SFP_SPEED_100_1000;
+		break;
+	case XGBE_SFP_BASE_1000_SX:
+	case XGBE_SFP_BASE_1000_LX:
+	case XGBE_SFP_BASE_1000_CX:
+		phy_data->sfp_speed = XGBE_SFP_SPEED_1000;
+		break;
+	case XGBE_SFP_BASE_10000_SR:
+	case XGBE_SFP_BASE_10000_LR:
+	case XGBE_SFP_BASE_10000_LRM:
+	case XGBE_SFP_BASE_10000_ER:
+	case XGBE_SFP_BASE_10000_CR:
+		phy_data->sfp_speed = XGBE_SFP_SPEED_10000;
+		break;
+	default:
+		break;
+	}
+}
+
+static void xgbe_phy_sfp_eeprom_info(struct xgbe_prv_data *pdata,
+				     struct xgbe_sfp_eeprom *sfp_eeprom)
+{
+	struct xgbe_sfp_ascii sfp_ascii;
+	char *sfp_data = (char *)&sfp_ascii;
+
+	netif_dbg(pdata, drv, pdata->netdev, "SFP detected:\n");
+	memcpy(sfp_data, &sfp_eeprom->base[XGBE_SFP_BASE_VENDOR_NAME],
+	       XGBE_SFP_BASE_VENDOR_NAME_LEN);
+	sfp_data[XGBE_SFP_BASE_VENDOR_NAME_LEN] = '\0';
+	netif_dbg(pdata, drv, pdata->netdev, "  vendor:         %s\n",
+		  sfp_data);
+
+	memcpy(sfp_data, &sfp_eeprom->base[XGBE_SFP_BASE_VENDOR_PN],
+	       XGBE_SFP_BASE_VENDOR_PN_LEN);
+	sfp_data[XGBE_SFP_BASE_VENDOR_PN_LEN] = '\0';
+	netif_dbg(pdata, drv, pdata->netdev, "  part number:    %s\n",
+		  sfp_data);
+
+	memcpy(sfp_data, &sfp_eeprom->base[XGBE_SFP_BASE_VENDOR_REV],
+	       XGBE_SFP_BASE_VENDOR_REV_LEN);
+	sfp_data[XGBE_SFP_BASE_VENDOR_REV_LEN] = '\0';
+	netif_dbg(pdata, drv, pdata->netdev, "  revision level: %s\n",
+		  sfp_data);
+
+	memcpy(sfp_data, &sfp_eeprom->extd[XGBE_SFP_BASE_VENDOR_SN],
+	       XGBE_SFP_BASE_VENDOR_SN_LEN);
+	sfp_data[XGBE_SFP_BASE_VENDOR_SN_LEN] = '\0';
+	netif_dbg(pdata, drv, pdata->netdev, "  serial number:  %s\n",
+		  sfp_data);
+}
+
+static bool xgbe_phy_sfp_verify_eeprom(u8 cc_in, u8 *buf, unsigned int len)
+{
+	u8 cc;
+
+	for (cc = 0; len; buf++, len--)
+		cc += *buf;
+
+	return cc == cc_in;
+}
+
+static int xgbe_phy_sfp_read_eeprom(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	struct xgbe_sfp_eeprom sfp_eeprom;
+	u8 eeprom_addr;
+	int ret;
+
+	ret = xgbe_phy_sfp_get_mux(pdata);
+	if (ret) {
+		dev_err_once(pdata->dev, "%s: I2C error setting SFP MUX\n",
+			     netdev_name(pdata->netdev));
+		return ret;
+	}
+
+	/* Read the SFP serial ID eeprom */
+	eeprom_addr = 0;
+	ret = xgbe_phy_i2c_read(pdata, XGBE_SFP_SERIAL_ID_ADDRESS,
+				&eeprom_addr, sizeof(eeprom_addr),
+				&sfp_eeprom, sizeof(sfp_eeprom));
+	if (ret) {
+		dev_err_once(pdata->dev, "%s: I2C error reading SFP EEPROM\n",
+			     netdev_name(pdata->netdev));
+		goto put;
+	}
+
+	/* Validate the contents read */
+	if (!xgbe_phy_sfp_verify_eeprom(sfp_eeprom.base[XGBE_SFP_BASE_CC],
+					sfp_eeprom.base,
+					sizeof(sfp_eeprom.base) - 1)) {
+		ret = -EINVAL;
+		goto put;
+	}
+
+	if (!xgbe_phy_sfp_verify_eeprom(sfp_eeprom.extd[XGBE_SFP_EXTD_CC],
+					sfp_eeprom.extd,
+					sizeof(sfp_eeprom.extd) - 1)) {
+		ret = -EINVAL;
+		goto put;
+	}
+
+	/* Check for an added or changed SFP */
+	if (memcmp(&phy_data->sfp_eeprom, &sfp_eeprom, sizeof(sfp_eeprom))) {
+		phy_data->sfp_changed = 1;
+
+		if (netif_msg_drv(pdata))
+			xgbe_phy_sfp_eeprom_info(pdata, &sfp_eeprom);
+
+		memcpy(&phy_data->sfp_eeprom, &sfp_eeprom, sizeof(sfp_eeprom));
+
+		xgbe_phy_free_phy_device(pdata);
+	} else {
+		phy_data->sfp_changed = 0;
+	}
+
+put:
+	xgbe_phy_sfp_put_mux(pdata);
+
+	return ret;
+}
+
+static void xgbe_phy_sfp_signals(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	u8 gpio_reg, gpio_ports[2];
+	int ret;
+
+	/* Read the input port registers */
+	gpio_reg = 0;
+	ret = xgbe_phy_i2c_read(pdata, phy_data->sfp_gpio_address,
+				&gpio_reg, sizeof(gpio_reg),
+				gpio_ports, sizeof(gpio_ports));
+	if (ret) {
+		dev_err_once(pdata->dev, "%s: I2C error reading SFP GPIOs\n",
+			     netdev_name(pdata->netdev));
+		return;
+	}
+
+	phy_data->sfp_gpio_inputs = (gpio_ports[1] << 8) | gpio_ports[0];
+
+	phy_data->sfp_mod_absent = xgbe_phy_check_sfp_mod_absent(phy_data);
+}
+
+static void xgbe_phy_sfp_mod_absent(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	xgbe_phy_free_phy_device(pdata);
+
+	phy_data->sfp_mod_absent = 1;
+	phy_data->sfp_phy_avail = 0;
+	memset(&phy_data->sfp_eeprom, 0, sizeof(phy_data->sfp_eeprom));
+}
+
+static void xgbe_phy_sfp_reset(struct xgbe_phy_data *phy_data)
+{
+	phy_data->sfp_rx_los = 0;
+	phy_data->sfp_tx_fault = 0;
+	phy_data->sfp_mod_absent = 1;
+	phy_data->sfp_base = XGBE_SFP_BASE_UNKNOWN;
+	phy_data->sfp_cable = XGBE_SFP_CABLE_UNKNOWN;
+	phy_data->sfp_speed = XGBE_SFP_SPEED_UNKNOWN;
+}
+
+static void xgbe_phy_sfp_detect(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	int ret;
+
+	/* Reset the SFP signals and info */
+	xgbe_phy_sfp_reset(phy_data);
+
+	ret = xgbe_phy_get_comm_ownership(pdata);
+	if (ret)
+		return;
+
+	/* Read the SFP signals and check for module presence */
+	xgbe_phy_sfp_signals(pdata);
+	if (phy_data->sfp_mod_absent) {
+		xgbe_phy_sfp_mod_absent(pdata);
+		goto put;
+	}
+
+	ret = xgbe_phy_sfp_read_eeprom(pdata);
+	if (ret) {
+		/* Treat any error as if there isn't an SFP plugged in */
+		xgbe_phy_sfp_reset(phy_data);
+		xgbe_phy_sfp_mod_absent(pdata);
+		goto put;
+	}
+
+	xgbe_phy_sfp_parse_eeprom(pdata);
+
+	xgbe_phy_sfp_external_phy(pdata);
+
+put:
+	xgbe_phy_sfp_phy_settings(pdata);
+
+	xgbe_phy_put_comm_ownership(pdata);
+}
+
+static int xgbe_phy_module_eeprom(struct xgbe_prv_data *pdata,
+				  struct ethtool_eeprom *eeprom, u8 *data)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	u8 eeprom_addr, eeprom_data[XGBE_SFP_EEPROM_MAX];
+	struct xgbe_sfp_eeprom *sfp_eeprom;
+	unsigned int i, j, rem;
+	int ret;
+
+	rem = eeprom->len;
+
+	if (!eeprom->len) {
+		ret = -EINVAL;
+		goto done;
+	}
+
+	if ((eeprom->offset + eeprom->len) > XGBE_SFP_EEPROM_MAX) {
+		ret = -EINVAL;
+		goto done;
+	}
+
+	if (phy_data->port_mode != XGBE_PORT_MODE_SFP) {
+		ret = -ENXIO;
+		goto done;
+	}
+
+	if (!netif_running(pdata->netdev)) {
+		ret = -EIO;
+		goto done;
+	}
+
+	if (phy_data->sfp_mod_absent) {
+		ret = -EIO;
+		goto done;
+	}
+
+	ret = xgbe_phy_get_comm_ownership(pdata);
+	if (ret) {
+		ret = -EIO;
+		goto done;
+	}
+
+	ret = xgbe_phy_sfp_get_mux(pdata);
+	if (ret) {
+		netdev_err(pdata->netdev, "I2C error setting SFP MUX\n");
+		ret = -EIO;
+		goto put_own;
+	}
+
+	/* Read the SFP serial ID eeprom */
+	eeprom_addr = 0;
+	ret = xgbe_phy_i2c_read(pdata, XGBE_SFP_SERIAL_ID_ADDRESS,
+				&eeprom_addr, sizeof(eeprom_addr),
+				eeprom_data, XGBE_SFP_EEPROM_BASE_LEN);
+	if (ret) {
+		netdev_err(pdata->netdev,
+			   "I2C error reading SFP EEPROM\n");
+		ret = -EIO;
+		goto put_mux;
+	}
+
+	sfp_eeprom = (struct xgbe_sfp_eeprom *)eeprom_data;
+
+	if (XGBE_SFP_DIAGS_SUPPORTED(sfp_eeprom)) {
+		/* Read the SFP diagnostic eeprom */
+		eeprom_addr = 0;
+		ret = xgbe_phy_i2c_read(pdata, XGBE_SFP_DIAG_INFO_ADDRESS,
+					&eeprom_addr, sizeof(eeprom_addr),
+					eeprom_data + XGBE_SFP_EEPROM_BASE_LEN,
+					XGBE_SFP_EEPROM_DIAG_LEN);
+		if (ret) {
+			netdev_err(pdata->netdev,
+				   "I2C error reading SFP DIAGS\n");
+			ret = -EIO;
+			goto put_mux;
+		}
+	}
+
+	for (i = 0, j = eeprom->offset; i < eeprom->len; i++, j++) {
+		if ((j >= XGBE_SFP_EEPROM_BASE_LEN) &&
+		    !XGBE_SFP_DIAGS_SUPPORTED(sfp_eeprom))
+			break;
+
+		data[i] = eeprom_data[j];
+		rem--;
+	}
+
+put_mux:
+	xgbe_phy_sfp_put_mux(pdata);
+
+put_own:
+	xgbe_phy_put_comm_ownership(pdata);
+
+done:
+	eeprom->len -= rem;
+
+	return ret;
+}
+
+static int xgbe_phy_module_info(struct xgbe_prv_data *pdata,
+				struct ethtool_modinfo *modinfo)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	if (phy_data->port_mode != XGBE_PORT_MODE_SFP)
+		return -ENXIO;
+
+	if (!netif_running(pdata->netdev))
+		return -EIO;
+
+	if (phy_data->sfp_mod_absent)
+		return -EIO;
+
+	if (XGBE_SFP_DIAGS_SUPPORTED(&phy_data->sfp_eeprom)) {
+		modinfo->type = ETH_MODULE_SFF_8472;
+		modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
+	} else {
+		modinfo->type = ETH_MODULE_SFF_8079;
+		modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
+	}
+
+	return 0;
+}
+
+static void xgbe_phy_phydev_flowctrl(struct xgbe_prv_data *pdata)
+{
+	struct ethtool_link_ksettings *lks = &pdata->phy.lks;
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	u16 lcl_adv = 0, rmt_adv = 0;
+	u8 fc;
+
+	pdata->phy.tx_pause = 0;
+	pdata->phy.rx_pause = 0;
+
+	if (!phy_data->phydev)
+		return;
+
+	lcl_adv = linkmode_adv_to_lcl_adv_t(phy_data->phydev->advertising);
+
+	if (phy_data->phydev->pause) {
+		XGBE_SET_LP_ADV(lks, Pause);
+		rmt_adv |= LPA_PAUSE_CAP;
+	}
+	if (phy_data->phydev->asym_pause) {
+		XGBE_SET_LP_ADV(lks, Asym_Pause);
+		rmt_adv |= LPA_PAUSE_ASYM;
+	}
+
+	fc = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv);
+	if (fc & FLOW_CTRL_TX)
+		pdata->phy.tx_pause = 1;
+	if (fc & FLOW_CTRL_RX)
+		pdata->phy.rx_pause = 1;
+}
+
+static enum xgbe_mode xgbe_phy_an37_sgmii_outcome(struct xgbe_prv_data *pdata)
+{
+	struct ethtool_link_ksettings *lks = &pdata->phy.lks;
+	enum xgbe_mode mode;
+
+	XGBE_SET_LP_ADV(lks, Autoneg);
+	XGBE_SET_LP_ADV(lks, TP);
+
+	/* Use external PHY to determine flow control */
+	if (pdata->phy.pause_autoneg)
+		xgbe_phy_phydev_flowctrl(pdata);
+
+	switch (pdata->an_status & XGBE_SGMII_AN_LINK_SPEED) {
+	case XGBE_SGMII_AN_LINK_SPEED_100:
+		if (pdata->an_status & XGBE_SGMII_AN_LINK_DUPLEX) {
+			XGBE_SET_LP_ADV(lks, 100baseT_Full);
+			mode = XGBE_MODE_SGMII_100;
+		} else {
+			/* Half-duplex not supported */
+			XGBE_SET_LP_ADV(lks, 100baseT_Half);
+			mode = XGBE_MODE_UNKNOWN;
+		}
+		break;
+	case XGBE_SGMII_AN_LINK_SPEED_1000:
+		if (pdata->an_status & XGBE_SGMII_AN_LINK_DUPLEX) {
+			XGBE_SET_LP_ADV(lks, 1000baseT_Full);
+			mode = XGBE_MODE_SGMII_1000;
+		} else {
+			/* Half-duplex not supported */
+			XGBE_SET_LP_ADV(lks, 1000baseT_Half);
+			mode = XGBE_MODE_UNKNOWN;
+		}
+		break;
+	default:
+		mode = XGBE_MODE_UNKNOWN;
+	}
+
+	return mode;
+}
+
+static enum xgbe_mode xgbe_phy_an37_outcome(struct xgbe_prv_data *pdata)
+{
+	struct ethtool_link_ksettings *lks = &pdata->phy.lks;
+	enum xgbe_mode mode;
+	unsigned int ad_reg, lp_reg;
+
+	XGBE_SET_LP_ADV(lks, Autoneg);
+	XGBE_SET_LP_ADV(lks, FIBRE);
+
+	/* Compare Advertisement and Link Partner register */
+	ad_reg = XMDIO_READ(pdata, MDIO_MMD_VEND2, MDIO_VEND2_AN_ADVERTISE);
+	lp_reg = XMDIO_READ(pdata, MDIO_MMD_VEND2, MDIO_VEND2_AN_LP_ABILITY);
+	if (lp_reg & 0x100)
+		XGBE_SET_LP_ADV(lks, Pause);
+	if (lp_reg & 0x80)
+		XGBE_SET_LP_ADV(lks, Asym_Pause);
+
+	if (pdata->phy.pause_autoneg) {
+		/* Set flow control based on auto-negotiation result */
+		pdata->phy.tx_pause = 0;
+		pdata->phy.rx_pause = 0;
+
+		if (ad_reg & lp_reg & 0x100) {
+			pdata->phy.tx_pause = 1;
+			pdata->phy.rx_pause = 1;
+		} else if (ad_reg & lp_reg & 0x80) {
+			if (ad_reg & 0x100)
+				pdata->phy.rx_pause = 1;
+			else if (lp_reg & 0x100)
+				pdata->phy.tx_pause = 1;
+		}
+	}
+
+	if (lp_reg & 0x20)
+		XGBE_SET_LP_ADV(lks, 1000baseX_Full);
+
+	/* Half duplex is not supported */
+	ad_reg &= lp_reg;
+	mode = (ad_reg & 0x20) ? XGBE_MODE_X : XGBE_MODE_UNKNOWN;
+
+	return mode;
+}
+
+static enum xgbe_mode xgbe_phy_an73_redrv_outcome(struct xgbe_prv_data *pdata)
+{
+	struct ethtool_link_ksettings *lks = &pdata->phy.lks;
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	enum xgbe_mode mode;
+	unsigned int ad_reg, lp_reg;
+
+	XGBE_SET_LP_ADV(lks, Autoneg);
+	XGBE_SET_LP_ADV(lks, Backplane);
+
+	/* Use external PHY to determine flow control */
+	if (pdata->phy.pause_autoneg)
+		xgbe_phy_phydev_flowctrl(pdata);
+
+	/* Compare Advertisement and Link Partner register 2 */
+	ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 1);
+	lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 1);
+	if (lp_reg & 0x80)
+		XGBE_SET_LP_ADV(lks, 10000baseKR_Full);
+	if (lp_reg & 0x20)
+		XGBE_SET_LP_ADV(lks, 1000baseKX_Full);
+
+	ad_reg &= lp_reg;
+	if (ad_reg & 0x80) {
+		switch (phy_data->port_mode) {
+		case XGBE_PORT_MODE_BACKPLANE:
+		case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG:
+			mode = XGBE_MODE_KR;
+			break;
+		default:
+			mode = XGBE_MODE_SFI;
+			break;
+		}
+	} else if (ad_reg & 0x20) {
+		switch (phy_data->port_mode) {
+		case XGBE_PORT_MODE_BACKPLANE:
+		case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG:
+			mode = XGBE_MODE_KX_1000;
+			break;
+		case XGBE_PORT_MODE_1000BASE_X:
+			mode = XGBE_MODE_X;
+			break;
+		case XGBE_PORT_MODE_SFP:
+			switch (phy_data->sfp_base) {
+			case XGBE_SFP_BASE_1000_T:
+				if (phy_data->phydev &&
+				    (phy_data->phydev->speed == SPEED_100))
+					mode = XGBE_MODE_SGMII_100;
+				else
+					mode = XGBE_MODE_SGMII_1000;
+				break;
+			case XGBE_SFP_BASE_1000_SX:
+			case XGBE_SFP_BASE_1000_LX:
+			case XGBE_SFP_BASE_1000_CX:
+			default:
+				mode = XGBE_MODE_X;
+				break;
+			}
+			break;
+		default:
+			if (phy_data->phydev &&
+			    (phy_data->phydev->speed == SPEED_100))
+				mode = XGBE_MODE_SGMII_100;
+			else
+				mode = XGBE_MODE_SGMII_1000;
+			break;
+		}
+	} else {
+		mode = XGBE_MODE_UNKNOWN;
+	}
+
+	/* Compare Advertisement and Link Partner register 3 */
+	ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2);
+	lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 2);
+	if (lp_reg & 0xc000)
+		XGBE_SET_LP_ADV(lks, 10000baseR_FEC);
+
+	return mode;
+}
+
+static enum xgbe_mode xgbe_phy_an73_outcome(struct xgbe_prv_data *pdata)
+{
+	struct ethtool_link_ksettings *lks = &pdata->phy.lks;
+	enum xgbe_mode mode;
+	unsigned int ad_reg, lp_reg;
+
+	XGBE_SET_LP_ADV(lks, Autoneg);
+	XGBE_SET_LP_ADV(lks, Backplane);
+
+	/* Compare Advertisement and Link Partner register 1 */
+	ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE);
+	lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA);
+	if (lp_reg & 0x400)
+		XGBE_SET_LP_ADV(lks, Pause);
+	if (lp_reg & 0x800)
+		XGBE_SET_LP_ADV(lks, Asym_Pause);
+
+	if (pdata->phy.pause_autoneg) {
+		/* Set flow control based on auto-negotiation result */
+		pdata->phy.tx_pause = 0;
+		pdata->phy.rx_pause = 0;
+
+		if (ad_reg & lp_reg & 0x400) {
+			pdata->phy.tx_pause = 1;
+			pdata->phy.rx_pause = 1;
+		} else if (ad_reg & lp_reg & 0x800) {
+			if (ad_reg & 0x400)
+				pdata->phy.rx_pause = 1;
+			else if (lp_reg & 0x400)
+				pdata->phy.tx_pause = 1;
+		}
+	}
+
+	/* Compare Advertisement and Link Partner register 2 */
+	ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 1);
+	lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 1);
+	if (lp_reg & 0x80)
+		XGBE_SET_LP_ADV(lks, 10000baseKR_Full);
+	if (lp_reg & 0x20)
+		XGBE_SET_LP_ADV(lks, 1000baseKX_Full);
+
+	ad_reg &= lp_reg;
+	if (ad_reg & 0x80)
+		mode = XGBE_MODE_KR;
+	else if (ad_reg & 0x20)
+		mode = XGBE_MODE_KX_1000;
+	else
+		mode = XGBE_MODE_UNKNOWN;
+
+	/* Compare Advertisement and Link Partner register 3 */
+	ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2);
+	lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 2);
+	if (lp_reg & 0xc000)
+		XGBE_SET_LP_ADV(lks, 10000baseR_FEC);
+
+	return mode;
+}
+
+static enum xgbe_mode xgbe_phy_an_outcome(struct xgbe_prv_data *pdata)
+{
+	switch (pdata->an_mode) {
+	case XGBE_AN_MODE_CL73:
+		return xgbe_phy_an73_outcome(pdata);
+	case XGBE_AN_MODE_CL73_REDRV:
+		return xgbe_phy_an73_redrv_outcome(pdata);
+	case XGBE_AN_MODE_CL37:
+		return xgbe_phy_an37_outcome(pdata);
+	case XGBE_AN_MODE_CL37_SGMII:
+		return xgbe_phy_an37_sgmii_outcome(pdata);
+	default:
+		return XGBE_MODE_UNKNOWN;
+	}
+}
+
+static void xgbe_phy_an_advertising(struct xgbe_prv_data *pdata,
+				    struct ethtool_link_ksettings *dlks)
+{
+	struct ethtool_link_ksettings *slks = &pdata->phy.lks;
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	XGBE_LM_COPY(dlks, advertising, slks, advertising);
+
+	/* Without a re-driver, just return current advertising */
+	if (!phy_data->redrv)
+		return;
+
+	/* With the KR re-driver we need to advertise a single speed */
+	XGBE_CLR_ADV(dlks, 1000baseKX_Full);
+	XGBE_CLR_ADV(dlks, 10000baseKR_Full);
+
+	/* Advertise FEC support is present */
+	if (pdata->fec_ability & MDIO_PMA_10GBR_FECABLE_ABLE)
+		XGBE_SET_ADV(dlks, 10000baseR_FEC);
+
+	switch (phy_data->port_mode) {
+	case XGBE_PORT_MODE_BACKPLANE:
+	case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG:
+		XGBE_SET_ADV(dlks, 10000baseKR_Full);
+		break;
+	case XGBE_PORT_MODE_BACKPLANE_2500:
+		XGBE_SET_ADV(dlks, 1000baseKX_Full);
+		break;
+	case XGBE_PORT_MODE_1000BASE_T:
+	case XGBE_PORT_MODE_1000BASE_X:
+	case XGBE_PORT_MODE_NBASE_T:
+		XGBE_SET_ADV(dlks, 1000baseKX_Full);
+		break;
+	case XGBE_PORT_MODE_10GBASE_T:
+		if (phy_data->phydev &&
+		    (phy_data->phydev->speed == SPEED_10000))
+			XGBE_SET_ADV(dlks, 10000baseKR_Full);
+		else
+			XGBE_SET_ADV(dlks, 1000baseKX_Full);
+		break;
+	case XGBE_PORT_MODE_10GBASE_R:
+		XGBE_SET_ADV(dlks, 10000baseKR_Full);
+		break;
+	case XGBE_PORT_MODE_SFP:
+		switch (phy_data->sfp_base) {
+		case XGBE_SFP_BASE_1000_T:
+		case XGBE_SFP_BASE_1000_SX:
+		case XGBE_SFP_BASE_1000_LX:
+		case XGBE_SFP_BASE_1000_CX:
+			XGBE_SET_ADV(dlks, 1000baseKX_Full);
+			break;
+		default:
+			XGBE_SET_ADV(dlks, 10000baseKR_Full);
+			break;
+		}
+		break;
+	default:
+		XGBE_SET_ADV(dlks, 10000baseKR_Full);
+		break;
+	}
+}
+
+static int xgbe_phy_an_config(struct xgbe_prv_data *pdata)
+{
+	struct ethtool_link_ksettings *lks = &pdata->phy.lks;
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	int ret;
+
+	ret = xgbe_phy_find_phy_device(pdata);
+	if (ret)
+		return ret;
+
+	if (!phy_data->phydev)
+		return 0;
+
+	phy_data->phydev->autoneg = pdata->phy.autoneg;
+	linkmode_and(phy_data->phydev->advertising,
+		     phy_data->phydev->supported,
+		     lks->link_modes.advertising);
+
+	if (pdata->phy.autoneg != AUTONEG_ENABLE) {
+		phy_data->phydev->speed = pdata->phy.speed;
+		phy_data->phydev->duplex = pdata->phy.duplex;
+	}
+
+	ret = phy_start_aneg(phy_data->phydev);
+
+	return ret;
+}
+
+static enum xgbe_an_mode xgbe_phy_an_sfp_mode(struct xgbe_phy_data *phy_data)
+{
+	switch (phy_data->sfp_base) {
+	case XGBE_SFP_BASE_1000_T:
+		return XGBE_AN_MODE_CL37_SGMII;
+	case XGBE_SFP_BASE_1000_SX:
+	case XGBE_SFP_BASE_1000_LX:
+	case XGBE_SFP_BASE_1000_CX:
+		return XGBE_AN_MODE_CL37;
+	default:
+		return XGBE_AN_MODE_NONE;
+	}
+}
+
+static enum xgbe_an_mode xgbe_phy_an_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	/* A KR re-driver will always require CL73 AN */
+	if (phy_data->redrv)
+		return XGBE_AN_MODE_CL73_REDRV;
+
+	switch (phy_data->port_mode) {
+	case XGBE_PORT_MODE_BACKPLANE:
+		return XGBE_AN_MODE_CL73;
+	case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG:
+	case XGBE_PORT_MODE_BACKPLANE_2500:
+		return XGBE_AN_MODE_NONE;
+	case XGBE_PORT_MODE_1000BASE_T:
+		return XGBE_AN_MODE_CL37_SGMII;
+	case XGBE_PORT_MODE_1000BASE_X:
+		return XGBE_AN_MODE_CL37;
+	case XGBE_PORT_MODE_NBASE_T:
+		return XGBE_AN_MODE_CL37_SGMII;
+	case XGBE_PORT_MODE_10GBASE_T:
+		return XGBE_AN_MODE_CL73;
+	case XGBE_PORT_MODE_10GBASE_R:
+		return XGBE_AN_MODE_NONE;
+	case XGBE_PORT_MODE_SFP:
+		return xgbe_phy_an_sfp_mode(phy_data);
+	default:
+		return XGBE_AN_MODE_NONE;
+	}
+}
+
+static int xgbe_phy_set_redrv_mode_mdio(struct xgbe_prv_data *pdata,
+					enum xgbe_phy_redrv_mode mode)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	u16 redrv_reg, redrv_val;
+
+	redrv_reg = XGBE_PHY_REDRV_MODE_REG + (phy_data->redrv_lane * 0x1000);
+	redrv_val = (u16)mode;
+
+	return pdata->hw_if.write_ext_mii_regs(pdata, phy_data->redrv_addr,
+					       redrv_reg, redrv_val);
+}
+
+static int xgbe_phy_set_redrv_mode_i2c(struct xgbe_prv_data *pdata,
+				       enum xgbe_phy_redrv_mode mode)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	unsigned int redrv_reg;
+	int ret;
+
+	/* Calculate the register to write */
+	redrv_reg = XGBE_PHY_REDRV_MODE_REG + (phy_data->redrv_lane * 0x1000);
+
+	ret = xgbe_phy_redrv_write(pdata, redrv_reg, mode);
+
+	return ret;
+}
+
+static void xgbe_phy_set_redrv_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	enum xgbe_phy_redrv_mode mode;
+	int ret;
+
+	if (!phy_data->redrv)
+		return;
+
+	mode = XGBE_PHY_REDRV_MODE_CX;
+	if ((phy_data->port_mode == XGBE_PORT_MODE_SFP) &&
+	    (phy_data->sfp_base != XGBE_SFP_BASE_1000_CX) &&
+	    (phy_data->sfp_base != XGBE_SFP_BASE_10000_CR))
+		mode = XGBE_PHY_REDRV_MODE_SR;
+
+	ret = xgbe_phy_get_comm_ownership(pdata);
+	if (ret)
+		return;
+
+	if (phy_data->redrv_if)
+		xgbe_phy_set_redrv_mode_i2c(pdata, mode);
+	else
+		xgbe_phy_set_redrv_mode_mdio(pdata, mode);
+
+	xgbe_phy_put_comm_ownership(pdata);
+}
+
+static void xgbe_phy_rx_reset(struct xgbe_prv_data *pdata)
+{
+	int reg;
+
+	reg = XMDIO_READ_BITS(pdata, MDIO_MMD_PCS, MDIO_PCS_DIGITAL_STAT,
+			      XGBE_PCS_PSEQ_STATE_MASK);
+	if (reg == XGBE_PCS_PSEQ_STATE_POWER_GOOD) {
+		/* Mailbox command timed out, reset of RX block is required.
+		 * This can be done by asseting the reset bit and wait for
+		 * its compeletion.
+		 */
+		XMDIO_WRITE_BITS(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_RX_CTRL1,
+				 XGBE_PMA_RX_RST_0_MASK, XGBE_PMA_RX_RST_0_RESET_ON);
+		ndelay(20);
+		XMDIO_WRITE_BITS(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_RX_CTRL1,
+				 XGBE_PMA_RX_RST_0_MASK, XGBE_PMA_RX_RST_0_RESET_OFF);
+		usleep_range(40, 50);
+		netif_err(pdata, link, pdata->netdev, "firmware mailbox reset performed\n");
+	}
+}
+
+static void xgbe_phy_pll_ctrl(struct xgbe_prv_data *pdata, bool enable)
+{
+	XMDIO_WRITE_BITS(pdata, MDIO_MMD_PMAPMD, MDIO_VEND2_PMA_MISC_CTRL0,
+			 XGBE_PMA_PLL_CTRL_MASK,
+			 enable ? XGBE_PMA_PLL_CTRL_ENABLE
+				: XGBE_PMA_PLL_CTRL_DISABLE);
+
+	/* Wait for command to complete */
+	usleep_range(100, 200);
+}
+
+static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
+					unsigned int cmd, unsigned int sub_cmd)
+{
+	unsigned int s0 = 0;
+	unsigned int wait;
+
+	/* Disable PLL re-initialization during FW command processing */
+	xgbe_phy_pll_ctrl(pdata, false);
+
+	/* Log if a previous command did not complete */
+	if (XP_IOREAD_BITS(pdata, XP_DRIVER_INT_RO, STATUS)) {
+		netif_dbg(pdata, link, pdata->netdev,
+			  "firmware mailbox not ready for command\n");
+		xgbe_phy_rx_reset(pdata);
+	}
+
+	/* Construct the command */
+	XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, COMMAND, cmd);
+	XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, SUB_COMMAND, sub_cmd);
+
+	/* Issue the command */
+	XP_IOWRITE(pdata, XP_DRIVER_SCRATCH_0, s0);
+	XP_IOWRITE(pdata, XP_DRIVER_SCRATCH_1, 0);
+	XP_IOWRITE_BITS(pdata, XP_DRIVER_INT_REQ, REQUEST, 1);
+
+	/* Wait for command to complete */
+	wait = XGBE_RATECHANGE_COUNT;
+	while (wait--) {
+		if (!XP_IOREAD_BITS(pdata, XP_DRIVER_INT_RO, STATUS))
+			goto reenable_pll;
+
+		usleep_range(1000, 2000);
+	}
+
+	netif_dbg(pdata, link, pdata->netdev,
+		  "firmware mailbox command did not complete\n");
+
+	/* Reset on error */
+	xgbe_phy_rx_reset(pdata);
+
+reenable_pll:
+	/* Enable PLL re-initialization */
+	xgbe_phy_pll_ctrl(pdata, true);
+}
+
+static void xgbe_phy_rrc(struct xgbe_prv_data *pdata)
+{
+	/* Receiver Reset Cycle */
+	xgbe_phy_perform_ratechange(pdata, 5, 0);
+
+	netif_dbg(pdata, link, pdata->netdev, "receiver reset complete\n");
+}
+
+static void xgbe_phy_power_off(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	/* Power off */
+	xgbe_phy_perform_ratechange(pdata, 0, 0);
+
+	phy_data->cur_mode = XGBE_MODE_UNKNOWN;
+
+	netif_dbg(pdata, link, pdata->netdev, "phy powered off\n");
+}
+
+static void xgbe_phy_sfi_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	xgbe_phy_set_redrv_mode(pdata);
+
+	/* 10G/SFI */
+	if (phy_data->sfp_cable != XGBE_SFP_CABLE_PASSIVE) {
+		xgbe_phy_perform_ratechange(pdata, 3, 0);
+	} else {
+		if (phy_data->sfp_cable_len <= 1)
+			xgbe_phy_perform_ratechange(pdata, 3, 1);
+		else if (phy_data->sfp_cable_len <= 3)
+			xgbe_phy_perform_ratechange(pdata, 3, 2);
+		else
+			xgbe_phy_perform_ratechange(pdata, 3, 3);
+	}
+
+	phy_data->cur_mode = XGBE_MODE_SFI;
+
+	netif_dbg(pdata, link, pdata->netdev, "10GbE SFI mode set\n");
+}
+
+static void xgbe_phy_x_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	xgbe_phy_set_redrv_mode(pdata);
+
+	/* 1G/X */
+	xgbe_phy_perform_ratechange(pdata, 1, 3);
+
+	phy_data->cur_mode = XGBE_MODE_X;
+
+	netif_dbg(pdata, link, pdata->netdev, "1GbE X mode set\n");
+}
+
+static void xgbe_phy_sgmii_1000_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	xgbe_phy_set_redrv_mode(pdata);
+
+	/* 1G/SGMII */
+	xgbe_phy_perform_ratechange(pdata, 1, 2);
+
+	phy_data->cur_mode = XGBE_MODE_SGMII_1000;
+
+	netif_dbg(pdata, link, pdata->netdev, "1GbE SGMII mode set\n");
+}
+
+static void xgbe_phy_sgmii_100_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	xgbe_phy_set_redrv_mode(pdata);
+
+	/* 100M/SGMII */
+	xgbe_phy_perform_ratechange(pdata, 1, 1);
+
+	phy_data->cur_mode = XGBE_MODE_SGMII_100;
+
+	netif_dbg(pdata, link, pdata->netdev, "100MbE SGMII mode set\n");
+}
+
+static void xgbe_phy_kr_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	xgbe_phy_set_redrv_mode(pdata);
+
+	/* 10G/KR */
+	xgbe_phy_perform_ratechange(pdata, 4, 0);
+
+	phy_data->cur_mode = XGBE_MODE_KR;
+
+	netif_dbg(pdata, link, pdata->netdev, "10GbE KR mode set\n");
+}
+
+static void xgbe_phy_kx_2500_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	xgbe_phy_set_redrv_mode(pdata);
+
+	/* 2.5G/KX */
+	xgbe_phy_perform_ratechange(pdata, 2, 0);
+
+	phy_data->cur_mode = XGBE_MODE_KX_2500;
+
+	netif_dbg(pdata, link, pdata->netdev, "2.5GbE KX mode set\n");
+}
+
+static void xgbe_phy_kx_1000_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	xgbe_phy_set_redrv_mode(pdata);
+
+	/* 1G/KX */
+	xgbe_phy_perform_ratechange(pdata, 1, 3);
+
+	phy_data->cur_mode = XGBE_MODE_KX_1000;
+
+	netif_dbg(pdata, link, pdata->netdev, "1GbE KX mode set\n");
+}
+
+static enum xgbe_mode xgbe_phy_cur_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	return phy_data->cur_mode;
+}
+
+static enum xgbe_mode xgbe_phy_switch_baset_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	/* No switching if not 10GBase-T */
+	if (phy_data->port_mode != XGBE_PORT_MODE_10GBASE_T)
+		return xgbe_phy_cur_mode(pdata);
+
+	switch (xgbe_phy_cur_mode(pdata)) {
+	case XGBE_MODE_SGMII_100:
+	case XGBE_MODE_SGMII_1000:
+		return XGBE_MODE_KR;
+	case XGBE_MODE_KR:
+	default:
+		return XGBE_MODE_SGMII_1000;
+	}
+}
+
+static enum xgbe_mode xgbe_phy_switch_bp_2500_mode(struct xgbe_prv_data *pdata)
+{
+	return XGBE_MODE_KX_2500;
+}
+
+static enum xgbe_mode xgbe_phy_switch_bp_mode(struct xgbe_prv_data *pdata)
+{
+	/* If we are in KR switch to KX, and vice-versa */
+	switch (xgbe_phy_cur_mode(pdata)) {
+	case XGBE_MODE_KX_1000:
+		return XGBE_MODE_KR;
+	case XGBE_MODE_KR:
+	default:
+		return XGBE_MODE_KX_1000;
+	}
+}
+
+static enum xgbe_mode xgbe_phy_switch_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	switch (phy_data->port_mode) {
+	case XGBE_PORT_MODE_BACKPLANE:
+	case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG:
+		return xgbe_phy_switch_bp_mode(pdata);
+	case XGBE_PORT_MODE_BACKPLANE_2500:
+		return xgbe_phy_switch_bp_2500_mode(pdata);
+	case XGBE_PORT_MODE_1000BASE_T:
+	case XGBE_PORT_MODE_NBASE_T:
+	case XGBE_PORT_MODE_10GBASE_T:
+		return xgbe_phy_switch_baset_mode(pdata);
+	case XGBE_PORT_MODE_1000BASE_X:
+	case XGBE_PORT_MODE_10GBASE_R:
+	case XGBE_PORT_MODE_SFP:
+		/* No switching, so just return current mode */
+		return xgbe_phy_cur_mode(pdata);
+	default:
+		return XGBE_MODE_UNKNOWN;
+	}
+}
+
+static enum xgbe_mode xgbe_phy_get_basex_mode(struct xgbe_phy_data *phy_data,
+					      int speed)
+{
+	switch (speed) {
+	case SPEED_1000:
+		return XGBE_MODE_X;
+	case SPEED_10000:
+		return XGBE_MODE_KR;
+	default:
+		return XGBE_MODE_UNKNOWN;
+	}
+}
+
+static enum xgbe_mode xgbe_phy_get_baset_mode(struct xgbe_phy_data *phy_data,
+					      int speed)
+{
+	switch (speed) {
+	case SPEED_100:
+		return XGBE_MODE_SGMII_100;
+	case SPEED_1000:
+		return XGBE_MODE_SGMII_1000;
+	case SPEED_2500:
+		return XGBE_MODE_KX_2500;
+	case SPEED_10000:
+		return XGBE_MODE_KR;
+	default:
+		return XGBE_MODE_UNKNOWN;
+	}
+}
+
+static enum xgbe_mode xgbe_phy_get_sfp_mode(struct xgbe_phy_data *phy_data,
+					    int speed)
+{
+	switch (speed) {
+	case SPEED_100:
+		return XGBE_MODE_SGMII_100;
+	case SPEED_1000:
+		if (phy_data->sfp_base == XGBE_SFP_BASE_1000_T)
+			return XGBE_MODE_SGMII_1000;
+		else
+			return XGBE_MODE_X;
+	case SPEED_10000:
+	case SPEED_UNKNOWN:
+		return XGBE_MODE_SFI;
+	default:
+		return XGBE_MODE_UNKNOWN;
+	}
+}
+
+static enum xgbe_mode xgbe_phy_get_bp_2500_mode(int speed)
+{
+	switch (speed) {
+	case SPEED_2500:
+		return XGBE_MODE_KX_2500;
+	default:
+		return XGBE_MODE_UNKNOWN;
+	}
+}
+
+static enum xgbe_mode xgbe_phy_get_bp_mode(int speed)
+{
+	switch (speed) {
+	case SPEED_1000:
+		return XGBE_MODE_KX_1000;
+	case SPEED_10000:
+		return XGBE_MODE_KR;
+	default:
+		return XGBE_MODE_UNKNOWN;
+	}
+}
+
+static enum xgbe_mode xgbe_phy_get_mode(struct xgbe_prv_data *pdata,
+					int speed)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	switch (phy_data->port_mode) {
+	case XGBE_PORT_MODE_BACKPLANE:
+	case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG:
+		return xgbe_phy_get_bp_mode(speed);
+	case XGBE_PORT_MODE_BACKPLANE_2500:
+		return xgbe_phy_get_bp_2500_mode(speed);
+	case XGBE_PORT_MODE_1000BASE_T:
+	case XGBE_PORT_MODE_NBASE_T:
+	case XGBE_PORT_MODE_10GBASE_T:
+		return xgbe_phy_get_baset_mode(phy_data, speed);
+	case XGBE_PORT_MODE_1000BASE_X:
+	case XGBE_PORT_MODE_10GBASE_R:
+		return xgbe_phy_get_basex_mode(phy_data, speed);
+	case XGBE_PORT_MODE_SFP:
+		return xgbe_phy_get_sfp_mode(phy_data, speed);
+	default:
+		return XGBE_MODE_UNKNOWN;
+	}
+}
+
+static void xgbe_phy_set_mode(struct xgbe_prv_data *pdata, enum xgbe_mode mode)
+{
+	switch (mode) {
+	case XGBE_MODE_KX_1000:
+		xgbe_phy_kx_1000_mode(pdata);
+		break;
+	case XGBE_MODE_KX_2500:
+		xgbe_phy_kx_2500_mode(pdata);
+		break;
+	case XGBE_MODE_KR:
+		xgbe_phy_kr_mode(pdata);
+		break;
+	case XGBE_MODE_SGMII_100:
+		xgbe_phy_sgmii_100_mode(pdata);
+		break;
+	case XGBE_MODE_SGMII_1000:
+		xgbe_phy_sgmii_1000_mode(pdata);
+		break;
+	case XGBE_MODE_X:
+		xgbe_phy_x_mode(pdata);
+		break;
+	case XGBE_MODE_SFI:
+		xgbe_phy_sfi_mode(pdata);
+		break;
+	default:
+		break;
+	}
+}
+
+static bool xgbe_phy_check_mode(struct xgbe_prv_data *pdata,
+				enum xgbe_mode mode, bool advert)
+{
+	if (pdata->phy.autoneg == AUTONEG_ENABLE) {
+		return advert;
+	} else {
+		enum xgbe_mode cur_mode;
+
+		cur_mode = xgbe_phy_get_mode(pdata, pdata->phy.speed);
+		if (cur_mode == mode)
+			return true;
+	}
+
+	return false;
+}
+
+static bool xgbe_phy_use_basex_mode(struct xgbe_prv_data *pdata,
+				    enum xgbe_mode mode)
+{
+	struct ethtool_link_ksettings *lks = &pdata->phy.lks;
+
+	switch (mode) {
+	case XGBE_MODE_X:
+		return xgbe_phy_check_mode(pdata, mode,
+					   XGBE_ADV(lks, 1000baseX_Full));
+	case XGBE_MODE_KR:
+		return xgbe_phy_check_mode(pdata, mode,
+					   XGBE_ADV(lks, 10000baseKR_Full));
+	default:
+		return false;
+	}
+}
+
+static bool xgbe_phy_use_baset_mode(struct xgbe_prv_data *pdata,
+				    enum xgbe_mode mode)
+{
+	struct ethtool_link_ksettings *lks = &pdata->phy.lks;
+
+	switch (mode) {
+	case XGBE_MODE_SGMII_100:
+		return xgbe_phy_check_mode(pdata, mode,
+					   XGBE_ADV(lks, 100baseT_Full));
+	case XGBE_MODE_SGMII_1000:
+		return xgbe_phy_check_mode(pdata, mode,
+					   XGBE_ADV(lks, 1000baseT_Full));
+	case XGBE_MODE_KX_2500:
+		return xgbe_phy_check_mode(pdata, mode,
+					   XGBE_ADV(lks, 2500baseT_Full));
+	case XGBE_MODE_KR:
+		return xgbe_phy_check_mode(pdata, mode,
+					   XGBE_ADV(lks, 10000baseT_Full));
+	default:
+		return false;
+	}
+}
+
+static bool xgbe_phy_use_sfp_mode(struct xgbe_prv_data *pdata,
+				  enum xgbe_mode mode)
+{
+	struct ethtool_link_ksettings *lks = &pdata->phy.lks;
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	switch (mode) {
+	case XGBE_MODE_X:
+		if (phy_data->sfp_base == XGBE_SFP_BASE_1000_T)
+			return false;
+		return xgbe_phy_check_mode(pdata, mode,
+					   XGBE_ADV(lks, 1000baseX_Full));
+	case XGBE_MODE_SGMII_100:
+		if (phy_data->sfp_base != XGBE_SFP_BASE_1000_T)
+			return false;
+		return xgbe_phy_check_mode(pdata, mode,
+					   XGBE_ADV(lks, 100baseT_Full));
+	case XGBE_MODE_SGMII_1000:
+		if (phy_data->sfp_base != XGBE_SFP_BASE_1000_T)
+			return false;
+		return xgbe_phy_check_mode(pdata, mode,
+					   XGBE_ADV(lks, 1000baseT_Full));
+	case XGBE_MODE_SFI:
+		if (phy_data->sfp_mod_absent)
+			return true;
+		return xgbe_phy_check_mode(pdata, mode,
+					   XGBE_ADV(lks, 10000baseSR_Full)  ||
+					   XGBE_ADV(lks, 10000baseLR_Full)  ||
+					   XGBE_ADV(lks, 10000baseLRM_Full) ||
+					   XGBE_ADV(lks, 10000baseER_Full)  ||
+					   XGBE_ADV(lks, 10000baseCR_Full));
+	default:
+		return false;
+	}
+}
+
+static bool xgbe_phy_use_bp_2500_mode(struct xgbe_prv_data *pdata,
+				      enum xgbe_mode mode)
+{
+	struct ethtool_link_ksettings *lks = &pdata->phy.lks;
+
+	switch (mode) {
+	case XGBE_MODE_KX_2500:
+		return xgbe_phy_check_mode(pdata, mode,
+					   XGBE_ADV(lks, 2500baseX_Full));
+	default:
+		return false;
+	}
+}
+
+static bool xgbe_phy_use_bp_mode(struct xgbe_prv_data *pdata,
+				 enum xgbe_mode mode)
+{
+	struct ethtool_link_ksettings *lks = &pdata->phy.lks;
+
+	switch (mode) {
+	case XGBE_MODE_KX_1000:
+		return xgbe_phy_check_mode(pdata, mode,
+					   XGBE_ADV(lks, 1000baseKX_Full));
+	case XGBE_MODE_KR:
+		return xgbe_phy_check_mode(pdata, mode,
+					   XGBE_ADV(lks, 10000baseKR_Full));
+	default:
+		return false;
+	}
+}
+
+static bool xgbe_phy_use_mode(struct xgbe_prv_data *pdata, enum xgbe_mode mode)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	switch (phy_data->port_mode) {
+	case XGBE_PORT_MODE_BACKPLANE:
+	case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG:
+		return xgbe_phy_use_bp_mode(pdata, mode);
+	case XGBE_PORT_MODE_BACKPLANE_2500:
+		return xgbe_phy_use_bp_2500_mode(pdata, mode);
+	case XGBE_PORT_MODE_1000BASE_T:
+	case XGBE_PORT_MODE_NBASE_T:
+	case XGBE_PORT_MODE_10GBASE_T:
+		return xgbe_phy_use_baset_mode(pdata, mode);
+	case XGBE_PORT_MODE_1000BASE_X:
+	case XGBE_PORT_MODE_10GBASE_R:
+		return xgbe_phy_use_basex_mode(pdata, mode);
+	case XGBE_PORT_MODE_SFP:
+		return xgbe_phy_use_sfp_mode(pdata, mode);
+	default:
+		return false;
+	}
+}
+
+static bool xgbe_phy_valid_speed_basex_mode(struct xgbe_phy_data *phy_data,
+					    int speed)
+{
+	switch (speed) {
+	case SPEED_1000:
+		return (phy_data->port_mode == XGBE_PORT_MODE_1000BASE_X);
+	case SPEED_10000:
+		return (phy_data->port_mode == XGBE_PORT_MODE_10GBASE_R);
+	default:
+		return false;
+	}
+}
+
+static bool xgbe_phy_valid_speed_baset_mode(struct xgbe_phy_data *phy_data,
+					    int speed)
+{
+	switch (speed) {
+	case SPEED_100:
+	case SPEED_1000:
+		return true;
+	case SPEED_2500:
+		return (phy_data->port_mode == XGBE_PORT_MODE_NBASE_T);
+	case SPEED_10000:
+		return (phy_data->port_mode == XGBE_PORT_MODE_10GBASE_T);
+	default:
+		return false;
+	}
+}
+
+static bool xgbe_phy_valid_speed_sfp_mode(struct xgbe_phy_data *phy_data,
+					  int speed)
+{
+	switch (speed) {
+	case SPEED_100:
+		return (phy_data->sfp_speed == XGBE_SFP_SPEED_100_1000);
+	case SPEED_1000:
+		return ((phy_data->sfp_speed == XGBE_SFP_SPEED_100_1000) ||
+			(phy_data->sfp_speed == XGBE_SFP_SPEED_1000));
+	case SPEED_10000:
+		return (phy_data->sfp_speed == XGBE_SFP_SPEED_10000);
+	default:
+		return false;
+	}
+}
+
+static bool xgbe_phy_valid_speed_bp_2500_mode(int speed)
+{
+	switch (speed) {
+	case SPEED_2500:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool xgbe_phy_valid_speed_bp_mode(int speed)
+{
+	switch (speed) {
+	case SPEED_1000:
+	case SPEED_10000:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool xgbe_phy_valid_speed(struct xgbe_prv_data *pdata, int speed)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	switch (phy_data->port_mode) {
+	case XGBE_PORT_MODE_BACKPLANE:
+	case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG:
+		return xgbe_phy_valid_speed_bp_mode(speed);
+	case XGBE_PORT_MODE_BACKPLANE_2500:
+		return xgbe_phy_valid_speed_bp_2500_mode(speed);
+	case XGBE_PORT_MODE_1000BASE_T:
+	case XGBE_PORT_MODE_NBASE_T:
+	case XGBE_PORT_MODE_10GBASE_T:
+		return xgbe_phy_valid_speed_baset_mode(phy_data, speed);
+	case XGBE_PORT_MODE_1000BASE_X:
+	case XGBE_PORT_MODE_10GBASE_R:
+		return xgbe_phy_valid_speed_basex_mode(phy_data, speed);
+	case XGBE_PORT_MODE_SFP:
+		return xgbe_phy_valid_speed_sfp_mode(phy_data, speed);
+	default:
+		return false;
+	}
+}
+
+static int xgbe_phy_link_status(struct xgbe_prv_data *pdata, int *an_restart)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	unsigned int reg;
+	int ret;
+
+	*an_restart = 0;
+
+	if (phy_data->port_mode == XGBE_PORT_MODE_SFP) {
+		/* Check SFP signals */
+		xgbe_phy_sfp_detect(pdata);
+
+		if (phy_data->sfp_changed) {
+			*an_restart = 1;
+			return 0;
+		}
+
+		if (phy_data->sfp_mod_absent || phy_data->sfp_rx_los)
+			return 0;
+	}
+
+	if (phy_data->phydev) {
+		/* Check external PHY */
+		ret = phy_read_status(phy_data->phydev);
+		if (ret < 0)
+			return 0;
+
+		if ((pdata->phy.autoneg == AUTONEG_ENABLE) &&
+		    !phy_aneg_done(phy_data->phydev))
+			return 0;
+
+		if (!phy_data->phydev->link)
+			return 0;
+	}
+
+	/* Link status is latched low, so read once to clear
+	 * and then read again to get current state
+	 */
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
+	if (reg & MDIO_STAT1_LSTATUS)
+		return 1;
+
+	if (pdata->phy.autoneg == AUTONEG_ENABLE &&
+	    phy_data->port_mode == XGBE_PORT_MODE_BACKPLANE) {
+		if (!test_bit(XGBE_LINK_INIT, &pdata->dev_state)) {
+			netif_carrier_off(pdata->netdev);
+			*an_restart = 1;
+		}
+	}
+
+	/* No link, attempt a receiver reset cycle */
+	if (phy_data->rrc_count++ > XGBE_RRC_FREQUENCY) {
+		phy_data->rrc_count = 0;
+		xgbe_phy_rrc(pdata);
+	}
+
+	return 0;
+}
+
+static void xgbe_phy_sfp_gpio_setup(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	phy_data->sfp_gpio_address = XGBE_GPIO_ADDRESS_PCA9555 +
+				     XP_GET_BITS(pdata->pp3, XP_PROP_3,
+						 GPIO_ADDR);
+
+	phy_data->sfp_gpio_mask = XP_GET_BITS(pdata->pp3, XP_PROP_3,
+					      GPIO_MASK);
+
+	phy_data->sfp_gpio_rx_los = XP_GET_BITS(pdata->pp3, XP_PROP_3,
+						GPIO_RX_LOS);
+	phy_data->sfp_gpio_tx_fault = XP_GET_BITS(pdata->pp3, XP_PROP_3,
+						  GPIO_TX_FAULT);
+	phy_data->sfp_gpio_mod_absent = XP_GET_BITS(pdata->pp3, XP_PROP_3,
+						    GPIO_MOD_ABS);
+	phy_data->sfp_gpio_rate_select = XP_GET_BITS(pdata->pp3, XP_PROP_3,
+						     GPIO_RATE_SELECT);
+
+	if (netif_msg_probe(pdata)) {
+		dev_dbg(pdata->dev, "SFP: gpio_address=%#x\n",
+			phy_data->sfp_gpio_address);
+		dev_dbg(pdata->dev, "SFP: gpio_mask=%#x\n",
+			phy_data->sfp_gpio_mask);
+		dev_dbg(pdata->dev, "SFP: gpio_rx_los=%u\n",
+			phy_data->sfp_gpio_rx_los);
+		dev_dbg(pdata->dev, "SFP: gpio_tx_fault=%u\n",
+			phy_data->sfp_gpio_tx_fault);
+		dev_dbg(pdata->dev, "SFP: gpio_mod_absent=%u\n",
+			phy_data->sfp_gpio_mod_absent);
+		dev_dbg(pdata->dev, "SFP: gpio_rate_select=%u\n",
+			phy_data->sfp_gpio_rate_select);
+	}
+}
+
+static void xgbe_phy_sfp_comm_setup(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	unsigned int mux_addr_hi, mux_addr_lo;
+
+	mux_addr_hi = XP_GET_BITS(pdata->pp4, XP_PROP_4, MUX_ADDR_HI);
+	mux_addr_lo = XP_GET_BITS(pdata->pp4, XP_PROP_4, MUX_ADDR_LO);
+	if (mux_addr_lo == XGBE_SFP_DIRECT)
+		return;
+
+	phy_data->sfp_comm = XGBE_SFP_COMM_PCA9545;
+	phy_data->sfp_mux_address = (mux_addr_hi << 2) + mux_addr_lo;
+	phy_data->sfp_mux_channel = XP_GET_BITS(pdata->pp4, XP_PROP_4,
+						MUX_CHAN);
+
+	if (netif_msg_probe(pdata)) {
+		dev_dbg(pdata->dev, "SFP: mux_address=%#x\n",
+			phy_data->sfp_mux_address);
+		dev_dbg(pdata->dev, "SFP: mux_channel=%u\n",
+			phy_data->sfp_mux_channel);
+	}
+}
+
+static void xgbe_phy_sfp_setup(struct xgbe_prv_data *pdata)
+{
+	xgbe_phy_sfp_comm_setup(pdata);
+	xgbe_phy_sfp_gpio_setup(pdata);
+}
+
+static int xgbe_phy_int_mdio_reset(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	unsigned int ret;
+
+	ret = pdata->hw_if.set_gpio(pdata, phy_data->mdio_reset_gpio);
+	if (ret)
+		return ret;
+
+	ret = pdata->hw_if.clr_gpio(pdata, phy_data->mdio_reset_gpio);
+
+	return ret;
+}
+
+static int xgbe_phy_i2c_mdio_reset(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	u8 gpio_reg, gpio_ports[2], gpio_data[3];
+	int ret;
+
+	/* Read the output port registers */
+	gpio_reg = 2;
+	ret = xgbe_phy_i2c_read(pdata, phy_data->mdio_reset_addr,
+				&gpio_reg, sizeof(gpio_reg),
+				gpio_ports, sizeof(gpio_ports));
+	if (ret)
+		return ret;
+
+	/* Prepare to write the GPIO data */
+	gpio_data[0] = 2;
+	gpio_data[1] = gpio_ports[0];
+	gpio_data[2] = gpio_ports[1];
+
+	/* Set the GPIO pin */
+	if (phy_data->mdio_reset_gpio < 8)
+		gpio_data[1] |= (1 << (phy_data->mdio_reset_gpio % 8));
+	else
+		gpio_data[2] |= (1 << (phy_data->mdio_reset_gpio % 8));
+
+	/* Write the output port registers */
+	ret = xgbe_phy_i2c_write(pdata, phy_data->mdio_reset_addr,
+				 gpio_data, sizeof(gpio_data));
+	if (ret)
+		return ret;
+
+	/* Clear the GPIO pin */
+	if (phy_data->mdio_reset_gpio < 8)
+		gpio_data[1] &= ~(1 << (phy_data->mdio_reset_gpio % 8));
+	else
+		gpio_data[2] &= ~(1 << (phy_data->mdio_reset_gpio % 8));
+
+	/* Write the output port registers */
+	ret = xgbe_phy_i2c_write(pdata, phy_data->mdio_reset_addr,
+				 gpio_data, sizeof(gpio_data));
+
+	return ret;
+}
+
+static int xgbe_phy_mdio_reset(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	int ret;
+
+	if (phy_data->conn_type != XGBE_CONN_TYPE_MDIO)
+		return 0;
+
+	ret = xgbe_phy_get_comm_ownership(pdata);
+	if (ret)
+		return ret;
+
+	if (phy_data->mdio_reset == XGBE_MDIO_RESET_I2C_GPIO)
+		ret = xgbe_phy_i2c_mdio_reset(pdata);
+	else if (phy_data->mdio_reset == XGBE_MDIO_RESET_INT_GPIO)
+		ret = xgbe_phy_int_mdio_reset(pdata);
+
+	xgbe_phy_put_comm_ownership(pdata);
+
+	return ret;
+}
+
+static bool xgbe_phy_redrv_error(struct xgbe_phy_data *phy_data)
+{
+	if (!phy_data->redrv)
+		return false;
+
+	if (phy_data->redrv_if >= XGBE_PHY_REDRV_IF_MAX)
+		return true;
+
+	switch (phy_data->redrv_model) {
+	case XGBE_PHY_REDRV_MODEL_4223:
+		if (phy_data->redrv_lane > 3)
+			return true;
+		break;
+	case XGBE_PHY_REDRV_MODEL_4227:
+		if (phy_data->redrv_lane > 1)
+			return true;
+		break;
+	default:
+		return true;
+	}
+
+	return false;
+}
+
+static int xgbe_phy_mdio_reset_setup(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	if (phy_data->conn_type != XGBE_CONN_TYPE_MDIO)
+		return 0;
+
+	phy_data->mdio_reset = XP_GET_BITS(pdata->pp3, XP_PROP_3, MDIO_RESET);
+	switch (phy_data->mdio_reset) {
+	case XGBE_MDIO_RESET_NONE:
+	case XGBE_MDIO_RESET_I2C_GPIO:
+	case XGBE_MDIO_RESET_INT_GPIO:
+		break;
+	default:
+		dev_err(pdata->dev, "unsupported MDIO reset (%#x)\n",
+			phy_data->mdio_reset);
+		return -EINVAL;
+	}
+
+	if (phy_data->mdio_reset == XGBE_MDIO_RESET_I2C_GPIO) {
+		phy_data->mdio_reset_addr = XGBE_GPIO_ADDRESS_PCA9555 +
+					    XP_GET_BITS(pdata->pp3, XP_PROP_3,
+							MDIO_RESET_I2C_ADDR);
+		phy_data->mdio_reset_gpio = XP_GET_BITS(pdata->pp3, XP_PROP_3,
+							MDIO_RESET_I2C_GPIO);
+	} else if (phy_data->mdio_reset == XGBE_MDIO_RESET_INT_GPIO) {
+		phy_data->mdio_reset_gpio = XP_GET_BITS(pdata->pp3, XP_PROP_3,
+							MDIO_RESET_INT_GPIO);
+	}
+
+	return 0;
+}
+
+static bool xgbe_phy_port_mode_mismatch(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	switch (phy_data->port_mode) {
+	case XGBE_PORT_MODE_BACKPLANE:
+	case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG:
+		if ((phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000) ||
+		    (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_10000))
+			return false;
+		break;
+	case XGBE_PORT_MODE_BACKPLANE_2500:
+		if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_2500)
+			return false;
+		break;
+	case XGBE_PORT_MODE_1000BASE_T:
+		if ((phy_data->port_speeds & XGBE_PHY_PORT_SPEED_100) ||
+		    (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000))
+			return false;
+		break;
+	case XGBE_PORT_MODE_1000BASE_X:
+		if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000)
+			return false;
+		break;
+	case XGBE_PORT_MODE_NBASE_T:
+		if ((phy_data->port_speeds & XGBE_PHY_PORT_SPEED_100) ||
+		    (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000) ||
+		    (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_2500))
+			return false;
+		break;
+	case XGBE_PORT_MODE_10GBASE_T:
+		if ((phy_data->port_speeds & XGBE_PHY_PORT_SPEED_100) ||
+		    (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000) ||
+		    (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_10000))
+			return false;
+		break;
+	case XGBE_PORT_MODE_10GBASE_R:
+		if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_10000)
+			return false;
+		break;
+	case XGBE_PORT_MODE_SFP:
+		if ((phy_data->port_speeds & XGBE_PHY_PORT_SPEED_100) ||
+		    (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000) ||
+		    (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_10000))
+			return false;
+		break;
+	default:
+		break;
+	}
+
+	return true;
+}
+
+static bool xgbe_phy_conn_type_mismatch(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	switch (phy_data->port_mode) {
+	case XGBE_PORT_MODE_BACKPLANE:
+	case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG:
+	case XGBE_PORT_MODE_BACKPLANE_2500:
+		if (phy_data->conn_type == XGBE_CONN_TYPE_BACKPLANE)
+			return false;
+		break;
+	case XGBE_PORT_MODE_1000BASE_T:
+	case XGBE_PORT_MODE_1000BASE_X:
+	case XGBE_PORT_MODE_NBASE_T:
+	case XGBE_PORT_MODE_10GBASE_T:
+	case XGBE_PORT_MODE_10GBASE_R:
+		if (phy_data->conn_type == XGBE_CONN_TYPE_MDIO)
+			return false;
+		break;
+	case XGBE_PORT_MODE_SFP:
+		if (phy_data->conn_type == XGBE_CONN_TYPE_SFP)
+			return false;
+		break;
+	default:
+		break;
+	}
+
+	return true;
+}
+
+static bool xgbe_phy_port_enabled(struct xgbe_prv_data *pdata)
+{
+	if (!XP_GET_BITS(pdata->pp0, XP_PROP_0, PORT_SPEEDS))
+		return false;
+	if (!XP_GET_BITS(pdata->pp0, XP_PROP_0, CONN_TYPE))
+		return false;
+
+	return true;
+}
+
+static void xgbe_phy_cdr_track(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	if (!pdata->debugfs_an_cdr_workaround)
+		return;
+
+	if (!phy_data->phy_cdr_notrack)
+		return;
+
+	usleep_range(phy_data->phy_cdr_delay,
+		     phy_data->phy_cdr_delay + 500);
+
+	XMDIO_WRITE_BITS(pdata, MDIO_MMD_PMAPMD, MDIO_VEND2_PMA_CDR_CONTROL,
+			 XGBE_PMA_CDR_TRACK_EN_MASK,
+			 XGBE_PMA_CDR_TRACK_EN_ON);
+
+	phy_data->phy_cdr_notrack = 0;
+}
+
+static void xgbe_phy_cdr_notrack(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	if (!pdata->debugfs_an_cdr_workaround)
+		return;
+
+	if (phy_data->phy_cdr_notrack)
+		return;
+
+	XMDIO_WRITE_BITS(pdata, MDIO_MMD_PMAPMD, MDIO_VEND2_PMA_CDR_CONTROL,
+			 XGBE_PMA_CDR_TRACK_EN_MASK,
+			 XGBE_PMA_CDR_TRACK_EN_OFF);
+
+	xgbe_phy_rrc(pdata);
+
+	phy_data->phy_cdr_notrack = 1;
+}
+
+static void xgbe_phy_kr_training_post(struct xgbe_prv_data *pdata)
+{
+	if (!pdata->debugfs_an_cdr_track_early)
+		xgbe_phy_cdr_track(pdata);
+}
+
+static void xgbe_phy_kr_training_pre(struct xgbe_prv_data *pdata)
+{
+	if (pdata->debugfs_an_cdr_track_early)
+		xgbe_phy_cdr_track(pdata);
+}
+
+static void xgbe_phy_an_post(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	switch (pdata->an_mode) {
+	case XGBE_AN_MODE_CL73:
+	case XGBE_AN_MODE_CL73_REDRV:
+		if (phy_data->cur_mode != XGBE_MODE_KR)
+			break;
+
+		xgbe_phy_cdr_track(pdata);
+
+		switch (pdata->an_result) {
+		case XGBE_AN_READY:
+		case XGBE_AN_COMPLETE:
+			break;
+		default:
+			if (phy_data->phy_cdr_delay < XGBE_CDR_DELAY_MAX)
+				phy_data->phy_cdr_delay += XGBE_CDR_DELAY_INC;
+			else
+				phy_data->phy_cdr_delay = XGBE_CDR_DELAY_INIT;
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+static void xgbe_phy_an_pre(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	switch (pdata->an_mode) {
+	case XGBE_AN_MODE_CL73:
+	case XGBE_AN_MODE_CL73_REDRV:
+		if (phy_data->cur_mode != XGBE_MODE_KR)
+			break;
+
+		xgbe_phy_cdr_notrack(pdata);
+		break;
+	default:
+		break;
+	}
+}
+
+static void xgbe_phy_stop(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	/* If we have an external PHY, free it */
+	xgbe_phy_free_phy_device(pdata);
+
+	/* Reset SFP data */
+	xgbe_phy_sfp_reset(phy_data);
+	xgbe_phy_sfp_mod_absent(pdata);
+
+	/* Reset CDR support */
+	xgbe_phy_cdr_track(pdata);
+
+	/* Power off the PHY */
+	xgbe_phy_power_off(pdata);
+
+	/* Stop the I2C controller */
+	pdata->i2c_if.i2c_stop(pdata);
+}
+
+static int xgbe_phy_start(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	int ret;
+
+	/* Start the I2C controller */
+	ret = pdata->i2c_if.i2c_start(pdata);
+	if (ret)
+		return ret;
+
+	/* Set the proper MDIO mode for the re-driver */
+	if (phy_data->redrv && !phy_data->redrv_if) {
+		ret = pdata->hw_if.set_ext_mii_mode(pdata, phy_data->redrv_addr,
+						    XGBE_MDIO_MODE_CL22);
+		if (ret) {
+			netdev_err(pdata->netdev,
+				   "redriver mdio port not compatible (%u)\n",
+				   phy_data->redrv_addr);
+			return ret;
+		}
+	}
+
+	/* Start in highest supported mode */
+	xgbe_phy_set_mode(pdata, phy_data->start_mode);
+
+	/* Reset CDR support */
+	xgbe_phy_cdr_track(pdata);
+
+	/* After starting the I2C controller, we can check for an SFP */
+	switch (phy_data->port_mode) {
+	case XGBE_PORT_MODE_SFP:
+		xgbe_phy_sfp_detect(pdata);
+		break;
+	default:
+		break;
+	}
+
+	/* If we have an external PHY, start it */
+	ret = xgbe_phy_find_phy_device(pdata);
+	if (ret)
+		goto err_i2c;
+
+	return 0;
+
+err_i2c:
+	pdata->i2c_if.i2c_stop(pdata);
+
+	return ret;
+}
+
+static int xgbe_phy_reset(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	enum xgbe_mode cur_mode;
+	int ret;
+
+	/* Reset by power cycling the PHY */
+	cur_mode = phy_data->cur_mode;
+	xgbe_phy_power_off(pdata);
+	xgbe_phy_set_mode(pdata, cur_mode);
+
+	if (!phy_data->phydev)
+		return 0;
+
+	/* Reset the external PHY */
+	ret = xgbe_phy_mdio_reset(pdata);
+	if (ret)
+		return ret;
+
+	return phy_init_hw(phy_data->phydev);
+}
+
+static void xgbe_phy_exit(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	/* Unregister for driving external PHYs */
+	mdiobus_unregister(phy_data->mii);
+}
+
+static int xgbe_phy_init(struct xgbe_prv_data *pdata)
+{
+	struct ethtool_link_ksettings *lks = &pdata->phy.lks;
+	struct xgbe_phy_data *phy_data;
+	struct mii_bus *mii;
+	int ret;
+
+	/* Check if enabled */
+	if (!xgbe_phy_port_enabled(pdata)) {
+		dev_info(pdata->dev, "device is not enabled\n");
+		return -ENODEV;
+	}
+
+	/* Initialize the I2C controller */
+	ret = pdata->i2c_if.i2c_init(pdata);
+	if (ret)
+		return ret;
+
+	phy_data = devm_kzalloc(pdata->dev, sizeof(*phy_data), GFP_KERNEL);
+	if (!phy_data)
+		return -ENOMEM;
+	pdata->phy_data = phy_data;
+
+	phy_data->port_mode = XP_GET_BITS(pdata->pp0, XP_PROP_0, PORT_MODE);
+	phy_data->port_id = XP_GET_BITS(pdata->pp0, XP_PROP_0, PORT_ID);
+	phy_data->port_speeds = XP_GET_BITS(pdata->pp0, XP_PROP_0, PORT_SPEEDS);
+	phy_data->conn_type = XP_GET_BITS(pdata->pp0, XP_PROP_0, CONN_TYPE);
+	phy_data->mdio_addr = XP_GET_BITS(pdata->pp0, XP_PROP_0, MDIO_ADDR);
+	if (netif_msg_probe(pdata)) {
+		dev_dbg(pdata->dev, "port mode=%u\n", phy_data->port_mode);
+		dev_dbg(pdata->dev, "port id=%u\n", phy_data->port_id);
+		dev_dbg(pdata->dev, "port speeds=%#x\n", phy_data->port_speeds);
+		dev_dbg(pdata->dev, "conn type=%u\n", phy_data->conn_type);
+		dev_dbg(pdata->dev, "mdio addr=%u\n", phy_data->mdio_addr);
+	}
+
+	phy_data->redrv = XP_GET_BITS(pdata->pp4, XP_PROP_4, REDRV_PRESENT);
+	phy_data->redrv_if = XP_GET_BITS(pdata->pp4, XP_PROP_4, REDRV_IF);
+	phy_data->redrv_addr = XP_GET_BITS(pdata->pp4, XP_PROP_4, REDRV_ADDR);
+	phy_data->redrv_lane = XP_GET_BITS(pdata->pp4, XP_PROP_4, REDRV_LANE);
+	phy_data->redrv_model = XP_GET_BITS(pdata->pp4, XP_PROP_4, REDRV_MODEL);
+	if (phy_data->redrv && netif_msg_probe(pdata)) {
+		dev_dbg(pdata->dev, "redrv present\n");
+		dev_dbg(pdata->dev, "redrv i/f=%u\n", phy_data->redrv_if);
+		dev_dbg(pdata->dev, "redrv addr=%#x\n", phy_data->redrv_addr);
+		dev_dbg(pdata->dev, "redrv lane=%u\n", phy_data->redrv_lane);
+		dev_dbg(pdata->dev, "redrv model=%u\n", phy_data->redrv_model);
+	}
+
+	/* Validate the connection requested */
+	if (xgbe_phy_conn_type_mismatch(pdata)) {
+		dev_err(pdata->dev, "phy mode/connection mismatch (%#x/%#x)\n",
+			phy_data->port_mode, phy_data->conn_type);
+		return -EINVAL;
+	}
+
+	/* Validate the mode requested */
+	if (xgbe_phy_port_mode_mismatch(pdata)) {
+		dev_err(pdata->dev, "phy mode/speed mismatch (%#x/%#x)\n",
+			phy_data->port_mode, phy_data->port_speeds);
+		return -EINVAL;
+	}
+
+	/* Check for and validate MDIO reset support */
+	ret = xgbe_phy_mdio_reset_setup(pdata);
+	if (ret)
+		return ret;
+
+	/* Validate the re-driver information */
+	if (xgbe_phy_redrv_error(phy_data)) {
+		dev_err(pdata->dev, "phy re-driver settings error\n");
+		return -EINVAL;
+	}
+	pdata->kr_redrv = phy_data->redrv;
+
+	/* Indicate current mode is unknown */
+	phy_data->cur_mode = XGBE_MODE_UNKNOWN;
+
+	/* Initialize supported features */
+	XGBE_ZERO_SUP(lks);
+
+	switch (phy_data->port_mode) {
+	/* Backplane support */
+	case XGBE_PORT_MODE_BACKPLANE:
+		XGBE_SET_SUP(lks, Autoneg);
+		fallthrough;
+	case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG:
+		XGBE_SET_SUP(lks, Pause);
+		XGBE_SET_SUP(lks, Asym_Pause);
+		XGBE_SET_SUP(lks, Backplane);
+		if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000) {
+			XGBE_SET_SUP(lks, 1000baseKX_Full);
+			phy_data->start_mode = XGBE_MODE_KX_1000;
+		}
+		if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_10000) {
+			XGBE_SET_SUP(lks, 10000baseKR_Full);
+			if (pdata->fec_ability & MDIO_PMA_10GBR_FECABLE_ABLE)
+				XGBE_SET_SUP(lks, 10000baseR_FEC);
+			phy_data->start_mode = XGBE_MODE_KR;
+		}
+
+		phy_data->phydev_mode = XGBE_MDIO_MODE_NONE;
+		break;
+	case XGBE_PORT_MODE_BACKPLANE_2500:
+		XGBE_SET_SUP(lks, Pause);
+		XGBE_SET_SUP(lks, Asym_Pause);
+		XGBE_SET_SUP(lks, Backplane);
+		XGBE_SET_SUP(lks, 2500baseX_Full);
+		phy_data->start_mode = XGBE_MODE_KX_2500;
+
+		phy_data->phydev_mode = XGBE_MDIO_MODE_NONE;
+		break;
+
+	/* MDIO 1GBase-T support */
+	case XGBE_PORT_MODE_1000BASE_T:
+		XGBE_SET_SUP(lks, Autoneg);
+		XGBE_SET_SUP(lks, Pause);
+		XGBE_SET_SUP(lks, Asym_Pause);
+		XGBE_SET_SUP(lks, TP);
+		if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_100) {
+			XGBE_SET_SUP(lks, 100baseT_Full);
+			phy_data->start_mode = XGBE_MODE_SGMII_100;
+		}
+		if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000) {
+			XGBE_SET_SUP(lks, 1000baseT_Full);
+			phy_data->start_mode = XGBE_MODE_SGMII_1000;
+		}
+
+		phy_data->phydev_mode = XGBE_MDIO_MODE_CL22;
+		break;
+
+	/* MDIO Base-X support */
+	case XGBE_PORT_MODE_1000BASE_X:
+		XGBE_SET_SUP(lks, Autoneg);
+		XGBE_SET_SUP(lks, Pause);
+		XGBE_SET_SUP(lks, Asym_Pause);
+		XGBE_SET_SUP(lks, FIBRE);
+		XGBE_SET_SUP(lks, 1000baseX_Full);
+		phy_data->start_mode = XGBE_MODE_X;
+
+		phy_data->phydev_mode = XGBE_MDIO_MODE_CL22;
+		break;
+
+	/* MDIO NBase-T support */
+	case XGBE_PORT_MODE_NBASE_T:
+		XGBE_SET_SUP(lks, Autoneg);
+		XGBE_SET_SUP(lks, Pause);
+		XGBE_SET_SUP(lks, Asym_Pause);
+		XGBE_SET_SUP(lks, TP);
+		if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_100) {
+			XGBE_SET_SUP(lks, 100baseT_Full);
+			phy_data->start_mode = XGBE_MODE_SGMII_100;
+		}
+		if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000) {
+			XGBE_SET_SUP(lks, 1000baseT_Full);
+			phy_data->start_mode = XGBE_MODE_SGMII_1000;
+		}
+		if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_2500) {
+			XGBE_SET_SUP(lks, 2500baseT_Full);
+			phy_data->start_mode = XGBE_MODE_KX_2500;
+		}
+
+		phy_data->phydev_mode = XGBE_MDIO_MODE_CL45;
+		break;
+
+	/* 10GBase-T support */
+	case XGBE_PORT_MODE_10GBASE_T:
+		XGBE_SET_SUP(lks, Autoneg);
+		XGBE_SET_SUP(lks, Pause);
+		XGBE_SET_SUP(lks, Asym_Pause);
+		XGBE_SET_SUP(lks, TP);
+		if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_100) {
+			XGBE_SET_SUP(lks, 100baseT_Full);
+			phy_data->start_mode = XGBE_MODE_SGMII_100;
+		}
+		if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000) {
+			XGBE_SET_SUP(lks, 1000baseT_Full);
+			phy_data->start_mode = XGBE_MODE_SGMII_1000;
+		}
+		if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_10000) {
+			XGBE_SET_SUP(lks, 10000baseT_Full);
+			phy_data->start_mode = XGBE_MODE_KR;
+		}
+
+		phy_data->phydev_mode = XGBE_MDIO_MODE_CL45;
+		break;
+
+	/* 10GBase-R support */
+	case XGBE_PORT_MODE_10GBASE_R:
+		XGBE_SET_SUP(lks, Autoneg);
+		XGBE_SET_SUP(lks, Pause);
+		XGBE_SET_SUP(lks, Asym_Pause);
+		XGBE_SET_SUP(lks, FIBRE);
+		XGBE_SET_SUP(lks, 10000baseSR_Full);
+		XGBE_SET_SUP(lks, 10000baseLR_Full);
+		XGBE_SET_SUP(lks, 10000baseLRM_Full);
+		XGBE_SET_SUP(lks, 10000baseER_Full);
+		if (pdata->fec_ability & MDIO_PMA_10GBR_FECABLE_ABLE)
+			XGBE_SET_SUP(lks, 10000baseR_FEC);
+		phy_data->start_mode = XGBE_MODE_SFI;
+
+		phy_data->phydev_mode = XGBE_MDIO_MODE_NONE;
+		break;
+
+	/* SFP support */
+	case XGBE_PORT_MODE_SFP:
+		XGBE_SET_SUP(lks, Autoneg);
+		XGBE_SET_SUP(lks, Pause);
+		XGBE_SET_SUP(lks, Asym_Pause);
+		XGBE_SET_SUP(lks, TP);
+		XGBE_SET_SUP(lks, FIBRE);
+		if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_100)
+			phy_data->start_mode = XGBE_MODE_SGMII_100;
+		if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000)
+			phy_data->start_mode = XGBE_MODE_SGMII_1000;
+		if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_10000)
+			phy_data->start_mode = XGBE_MODE_SFI;
+
+		phy_data->phydev_mode = XGBE_MDIO_MODE_CL22;
+
+		xgbe_phy_sfp_setup(pdata);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (netif_msg_probe(pdata))
+		dev_dbg(pdata->dev, "phy supported=0x%*pb\n",
+			__ETHTOOL_LINK_MODE_MASK_NBITS,
+			lks->link_modes.supported);
+
+	if ((phy_data->conn_type & XGBE_CONN_TYPE_MDIO) &&
+	    (phy_data->phydev_mode != XGBE_MDIO_MODE_NONE)) {
+		ret = pdata->hw_if.set_ext_mii_mode(pdata, phy_data->mdio_addr,
+						    phy_data->phydev_mode);
+		if (ret) {
+			dev_err(pdata->dev,
+				"mdio port/clause not compatible (%d/%u)\n",
+				phy_data->mdio_addr, phy_data->phydev_mode);
+			return -EINVAL;
+		}
+	}
+
+	if (phy_data->redrv && !phy_data->redrv_if) {
+		ret = pdata->hw_if.set_ext_mii_mode(pdata, phy_data->redrv_addr,
+						    XGBE_MDIO_MODE_CL22);
+		if (ret) {
+			dev_err(pdata->dev,
+				"redriver mdio port not compatible (%u)\n",
+				phy_data->redrv_addr);
+			return -EINVAL;
+		}
+	}
+
+	phy_data->phy_cdr_delay = XGBE_CDR_DELAY_INIT;
+
+	/* Register for driving external PHYs */
+	mii = devm_mdiobus_alloc(pdata->dev);
+	if (!mii) {
+		dev_err(pdata->dev, "mdiobus_alloc failed\n");
+		return -ENOMEM;
+	}
+
+	mii->priv = pdata;
+	mii->name = "amd-xgbe-mii";
+	mii->read = xgbe_phy_mii_read;
+	mii->write = xgbe_phy_mii_write;
+	mii->parent = pdata->dev;
+	mii->phy_mask = ~0;
+	snprintf(mii->id, sizeof(mii->id), "%s", dev_name(pdata->dev));
+	ret = mdiobus_register(mii);
+	if (ret) {
+		dev_err(pdata->dev, "mdiobus_register failed\n");
+		return ret;
+	}
+	phy_data->mii = mii;
+
+	return 0;
+}
+
+void xgbe_init_function_ptrs_phy_v2(struct xgbe_phy_if *phy_if)
+{
+	struct xgbe_phy_impl_if *phy_impl = &phy_if->phy_impl;
+
+	phy_impl->init			= xgbe_phy_init;
+	phy_impl->exit			= xgbe_phy_exit;
+
+	phy_impl->reset			= xgbe_phy_reset;
+	phy_impl->start			= xgbe_phy_start;
+	phy_impl->stop			= xgbe_phy_stop;
+
+	phy_impl->link_status		= xgbe_phy_link_status;
+
+	phy_impl->valid_speed		= xgbe_phy_valid_speed;
+
+	phy_impl->use_mode		= xgbe_phy_use_mode;
+	phy_impl->set_mode		= xgbe_phy_set_mode;
+	phy_impl->get_mode		= xgbe_phy_get_mode;
+	phy_impl->switch_mode		= xgbe_phy_switch_mode;
+	phy_impl->cur_mode		= xgbe_phy_cur_mode;
+
+	phy_impl->an_mode		= xgbe_phy_an_mode;
+
+	phy_impl->an_config		= xgbe_phy_an_config;
+
+	phy_impl->an_advertising	= xgbe_phy_an_advertising;
+
+	phy_impl->an_outcome		= xgbe_phy_an_outcome;
+
+	phy_impl->an_pre		= xgbe_phy_an_pre;
+	phy_impl->an_post		= xgbe_phy_an_post;
+
+	phy_impl->kr_training_pre	= xgbe_phy_kr_training_pre;
+	phy_impl->kr_training_post	= xgbe_phy_kr_training_post;
+
+	phy_impl->module_info		= xgbe_phy_module_info;
+	phy_impl->module_eeprom		= xgbe_phy_module_eeprom;
+}