Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

4 files changed, 1437 insertions, 0 deletions

diff --git a/drivers/phy/motorola/Kconfig b/drivers/phy/motorola/Kconfig
new file mode 100644
index 000000000..4b5e605a3
--- /dev/null
+++ b/drivers/phy/motorola/Kconfig
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Phy drivers for Motorola devices
+#
+config PHY_CPCAP_USB
+	tristate "CPCAP PMIC USB PHY driver"
+	depends on USB_SUPPORT && IIO
+	depends on USB_MUSB_HDRC || USB_MUSB_HDRC=n
+	select GENERIC_PHY
+	select USB_PHY
+	help
+	  Enable this for USB to work on Motorola phones and tablets
+	  such as Droid 4.
+
+config PHY_MAPPHONE_MDM6600
+	tristate "Motorola Mapphone MDM6600 modem USB PHY driver"
+	depends on OF && USB_SUPPORT && GPIOLIB
+	select GENERIC_PHY
+	help
+	  Enable this for MDM6600 USB modem to work on Motorola phones
+	  and tablets such as Droid 4.
diff --git a/drivers/phy/motorola/Makefile b/drivers/phy/motorola/Makefile
new file mode 100644
index 000000000..7c791cbb6
--- /dev/null
+++ b/drivers/phy/motorola/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for the phy drivers.
+#
+
+obj-$(CONFIG_PHY_CPCAP_USB)		+= phy-cpcap-usb.o
+obj-$(CONFIG_PHY_MAPPHONE_MDM6600)	+= phy-mapphone-mdm6600.o
diff --git a/drivers/phy/motorola/phy-cpcap-usb.c b/drivers/phy/motorola/phy-cpcap-usb.c
new file mode 100644
index 000000000..4728e2bff
--- /dev/null
+++ b/drivers/phy/motorola/phy-cpcap-usb.c
@@ -0,0 +1,736 @@
+/*
+ * Motorola CPCAP PMIC USB PHY driver
+ * Copyright (C) 2017 Tony Lindgren <tony@atomide.com>
+ *
+ * Some parts based on earlier Motorola Linux kernel tree code in
+ * board-mapphone-usb.c and cpcap-usb-det.c:
+ * Copyright (C) 2007 - 2011 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/atomic.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/iio/consumer.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/mfd/motorola-cpcap.h>
+#include <linux/phy/omap_usb.h>
+#include <linux/phy/phy.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/musb.h>
+
+/* CPCAP_REG_USBC1 register bits */
+#define CPCAP_BIT_IDPULSE		BIT(15)
+#define CPCAP_BIT_ID100KPU		BIT(14)
+#define CPCAP_BIT_IDPUCNTRL		BIT(13)
+#define CPCAP_BIT_IDPU			BIT(12)
+#define CPCAP_BIT_IDPD			BIT(11)
+#define CPCAP_BIT_VBUSCHRGTMR3		BIT(10)
+#define CPCAP_BIT_VBUSCHRGTMR2		BIT(9)
+#define CPCAP_BIT_VBUSCHRGTMR1		BIT(8)
+#define CPCAP_BIT_VBUSCHRGTMR0		BIT(7)
+#define CPCAP_BIT_VBUSPU		BIT(6)
+#define CPCAP_BIT_VBUSPD		BIT(5)
+#define CPCAP_BIT_DMPD			BIT(4)
+#define CPCAP_BIT_DPPD			BIT(3)
+#define CPCAP_BIT_DM1K5PU		BIT(2)
+#define CPCAP_BIT_DP1K5PU		BIT(1)
+#define CPCAP_BIT_DP150KPU		BIT(0)
+
+/* CPCAP_REG_USBC2 register bits */
+#define CPCAP_BIT_ZHSDRV1		BIT(15)
+#define CPCAP_BIT_ZHSDRV0		BIT(14)
+#define CPCAP_BIT_DPLLCLKREQ		BIT(13)
+#define CPCAP_BIT_SE0CONN		BIT(12)
+#define CPCAP_BIT_UARTTXTRI		BIT(11)
+#define CPCAP_BIT_UARTSWAP		BIT(10)
+#define CPCAP_BIT_UARTMUX1		BIT(9)
+#define CPCAP_BIT_UARTMUX0		BIT(8)
+#define CPCAP_BIT_ULPISTPLOW		BIT(7)
+#define CPCAP_BIT_TXENPOL		BIT(6)
+#define CPCAP_BIT_USBXCVREN		BIT(5)
+#define CPCAP_BIT_USBCNTRL		BIT(4)
+#define CPCAP_BIT_USBSUSPEND		BIT(3)
+#define CPCAP_BIT_EMUMODE2		BIT(2)
+#define CPCAP_BIT_EMUMODE1		BIT(1)
+#define CPCAP_BIT_EMUMODE0		BIT(0)
+
+/* CPCAP_REG_USBC3 register bits */
+#define CPCAP_BIT_SPARE_898_15		BIT(15)
+#define CPCAP_BIT_IHSTX03		BIT(14)
+#define CPCAP_BIT_IHSTX02		BIT(13)
+#define CPCAP_BIT_IHSTX01		BIT(12)
+#define CPCAP_BIT_IHSTX0		BIT(11)
+#define CPCAP_BIT_IDPU_SPI		BIT(10)
+#define CPCAP_BIT_UNUSED_898_9		BIT(9)
+#define CPCAP_BIT_VBUSSTBY_EN		BIT(8)
+#define CPCAP_BIT_VBUSEN_SPI		BIT(7)
+#define CPCAP_BIT_VBUSPU_SPI		BIT(6)
+#define CPCAP_BIT_VBUSPD_SPI		BIT(5)
+#define CPCAP_BIT_DMPD_SPI		BIT(4)
+#define CPCAP_BIT_DPPD_SPI		BIT(3)
+#define CPCAP_BIT_SUSPEND_SPI		BIT(2)
+#define CPCAP_BIT_PU_SPI		BIT(1)
+#define CPCAP_BIT_ULPI_SPI_SEL		BIT(0)
+
+struct cpcap_usb_ints_state {
+	bool id_ground;
+	bool id_float;
+	bool chrg_det;
+	bool rvrs_chrg;
+	bool vbusov;
+
+	bool chrg_se1b;
+	bool se0conn;
+	bool rvrs_mode;
+	bool chrgcurr1;
+	bool vbusvld;
+	bool sessvld;
+	bool sessend;
+	bool se1;
+
+	bool battdetb;
+	bool dm;
+	bool dp;
+};
+
+enum cpcap_gpio_mode {
+	CPCAP_DM_DP,
+	CPCAP_MDM_RX_TX,
+	CPCAP_UNKNOWN_DISABLED,	/* Seems to disable USB lines */
+	CPCAP_OTG_DM_DP,
+};
+
+struct cpcap_phy_ddata {
+	struct regmap *reg;
+	struct device *dev;
+	struct usb_phy phy;
+	struct delayed_work detect_work;
+	struct pinctrl *pins;
+	struct pinctrl_state *pins_ulpi;
+	struct pinctrl_state *pins_utmi;
+	struct pinctrl_state *pins_uart;
+	struct gpio_desc *gpio[2];
+	struct iio_channel *vbus;
+	struct iio_channel *id;
+	struct regulator *vusb;
+	atomic_t active;
+	unsigned int vbus_provider:1;
+	unsigned int docked:1;
+};
+
+static bool cpcap_usb_vbus_valid(struct cpcap_phy_ddata *ddata)
+{
+	int error, value = 0;
+
+	error = iio_read_channel_processed(ddata->vbus, &value);
+	if (error >= 0)
+		return value > 3900 ? true : false;
+
+	dev_err(ddata->dev, "error reading VBUS: %i\n", error);
+
+	return false;
+}
+
+static int cpcap_usb_phy_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+	otg->host = host;
+	if (!host)
+		otg->state = OTG_STATE_UNDEFINED;
+
+	return 0;
+}
+
+static int cpcap_usb_phy_set_peripheral(struct usb_otg *otg,
+					struct usb_gadget *gadget)
+{
+	otg->gadget = gadget;
+	if (!gadget)
+		otg->state = OTG_STATE_UNDEFINED;
+
+	return 0;
+}
+
+static const struct phy_ops ops = {
+	.owner		= THIS_MODULE,
+};
+
+static int cpcap_phy_get_ints_state(struct cpcap_phy_ddata *ddata,
+				    struct cpcap_usb_ints_state *s)
+{
+	int val, error;
+
+	error = regmap_read(ddata->reg, CPCAP_REG_INTS1, &val);
+	if (error)
+		return error;
+
+	s->id_ground = val & BIT(15);
+	s->id_float = val & BIT(14);
+	s->vbusov = val & BIT(11);
+
+	error = regmap_read(ddata->reg, CPCAP_REG_INTS2, &val);
+	if (error)
+		return error;
+
+	s->vbusvld = val & BIT(3);
+	s->sessvld = val & BIT(2);
+	s->sessend = val & BIT(1);
+	s->se1 = val & BIT(0);
+
+	error = regmap_read(ddata->reg, CPCAP_REG_INTS4, &val);
+	if (error)
+		return error;
+
+	s->dm = val & BIT(1);
+	s->dp = val & BIT(0);
+
+	return 0;
+}
+
+static int cpcap_usb_set_uart_mode(struct cpcap_phy_ddata *ddata);
+static int cpcap_usb_set_usb_mode(struct cpcap_phy_ddata *ddata);
+
+static void cpcap_usb_try_musb_mailbox(struct cpcap_phy_ddata *ddata,
+				       enum musb_vbus_id_status status)
+{
+	int error;
+
+	error = musb_mailbox(status);
+	if (!error)
+		return;
+
+	dev_dbg(ddata->dev, "%s: musb_mailbox failed: %i\n",
+		__func__, error);
+}
+
+static void cpcap_usb_detect(struct work_struct *work)
+{
+	struct cpcap_phy_ddata *ddata;
+	struct cpcap_usb_ints_state s;
+	bool vbus = false;
+	int error;
+
+	ddata = container_of(work, struct cpcap_phy_ddata, detect_work.work);
+
+	error = cpcap_phy_get_ints_state(ddata, &s);
+	if (error)
+		return;
+
+	vbus = cpcap_usb_vbus_valid(ddata);
+
+	/* We need to kick the VBUS as USB A-host */
+	if (s.id_ground && ddata->vbus_provider) {
+		dev_dbg(ddata->dev, "still in USB A-host mode, kicking VBUS\n");
+
+		cpcap_usb_try_musb_mailbox(ddata, MUSB_ID_GROUND);
+
+		error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3,
+					   CPCAP_BIT_VBUSSTBY_EN |
+					   CPCAP_BIT_VBUSEN_SPI,
+					   CPCAP_BIT_VBUSEN_SPI);
+		if (error)
+			goto out_err;
+
+		return;
+	}
+
+	if (vbus && s.id_ground && ddata->docked) {
+		dev_dbg(ddata->dev, "still docked as A-host, signal ID down\n");
+
+		cpcap_usb_try_musb_mailbox(ddata, MUSB_ID_GROUND);
+
+		return;
+	}
+
+	/* No VBUS needed with docks */
+	if (vbus && s.id_ground && !ddata->vbus_provider) {
+		dev_dbg(ddata->dev, "connected to a dock\n");
+
+		ddata->docked = true;
+
+		error = cpcap_usb_set_usb_mode(ddata);
+		if (error)
+			goto out_err;
+
+		cpcap_usb_try_musb_mailbox(ddata, MUSB_ID_GROUND);
+
+		/*
+		 * Force check state again after musb has reoriented,
+		 * otherwise devices won't enumerate after loading PHY
+		 * driver.
+		 */
+		schedule_delayed_work(&ddata->detect_work,
+				      msecs_to_jiffies(1000));
+
+		return;
+	}
+
+	if (s.id_ground && !ddata->docked) {
+		dev_dbg(ddata->dev, "id ground, USB host mode\n");
+
+		ddata->vbus_provider = true;
+
+		error = cpcap_usb_set_usb_mode(ddata);
+		if (error)
+			goto out_err;
+
+		cpcap_usb_try_musb_mailbox(ddata, MUSB_ID_GROUND);
+
+		error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3,
+					   CPCAP_BIT_VBUSSTBY_EN |
+					   CPCAP_BIT_VBUSEN_SPI,
+					   CPCAP_BIT_VBUSEN_SPI);
+		if (error)
+			goto out_err;
+
+		return;
+	}
+
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3,
+				   CPCAP_BIT_VBUSSTBY_EN |
+				   CPCAP_BIT_VBUSEN_SPI, 0);
+	if (error)
+		goto out_err;
+
+	vbus = cpcap_usb_vbus_valid(ddata);
+
+	/* Otherwise assume we're connected to a USB host */
+	if (vbus) {
+		dev_dbg(ddata->dev, "connected to USB host\n");
+		error = cpcap_usb_set_usb_mode(ddata);
+		if (error)
+			goto out_err;
+		cpcap_usb_try_musb_mailbox(ddata, MUSB_VBUS_VALID);
+
+		return;
+	}
+
+	ddata->vbus_provider = false;
+	ddata->docked = false;
+	cpcap_usb_try_musb_mailbox(ddata, MUSB_VBUS_OFF);
+
+	/* Default to debug UART mode */
+	error = cpcap_usb_set_uart_mode(ddata);
+	if (error)
+		goto out_err;
+
+	dev_dbg(ddata->dev, "set UART mode\n");
+
+	return;
+
+out_err:
+	dev_err(ddata->dev, "error setting cable state: %i\n", error);
+}
+
+static irqreturn_t cpcap_phy_irq_thread(int irq, void *data)
+{
+	struct cpcap_phy_ddata *ddata = data;
+
+	if (!atomic_read(&ddata->active))
+		return IRQ_NONE;
+
+	schedule_delayed_work(&ddata->detect_work, msecs_to_jiffies(1));
+
+	return IRQ_HANDLED;
+}
+
+static int cpcap_usb_init_irq(struct platform_device *pdev,
+			      struct cpcap_phy_ddata *ddata,
+			      const char *name)
+{
+	int irq, error;
+
+	irq = platform_get_irq_byname(pdev, name);
+	if (irq < 0)
+		return -ENODEV;
+
+	error = devm_request_threaded_irq(ddata->dev, irq, NULL,
+					  cpcap_phy_irq_thread,
+					  IRQF_SHARED |
+					  IRQF_ONESHOT,
+					  name, ddata);
+	if (error) {
+		dev_err(ddata->dev, "could not get irq %s: %i\n",
+			name, error);
+
+		return error;
+	}
+
+	return 0;
+}
+
+static const char * const cpcap_phy_irqs[] = {
+	/* REG_INT_0 */
+	"id_ground", "id_float",
+
+	/* REG_INT1 */
+	"se0conn", "vbusvld", "sessvld", "sessend", "se1",
+
+	/* REG_INT_3 */
+	"dm", "dp",
+};
+
+static int cpcap_usb_init_interrupts(struct platform_device *pdev,
+				     struct cpcap_phy_ddata *ddata)
+{
+	int i, error;
+
+	for (i = 0; i < ARRAY_SIZE(cpcap_phy_irqs); i++) {
+		error = cpcap_usb_init_irq(pdev, ddata, cpcap_phy_irqs[i]);
+		if (error)
+			return error;
+	}
+
+	return 0;
+}
+
+/*
+ * Optional pins and modes. At least Motorola mapphone devices
+ * are using two GPIOs and dynamic pinctrl to multiplex PHY pins
+ * to UART, ULPI or UTMI mode.
+ */
+
+static int cpcap_usb_gpio_set_mode(struct cpcap_phy_ddata *ddata,
+				   enum cpcap_gpio_mode mode)
+{
+	if (!ddata->gpio[0] || !ddata->gpio[1])
+		return 0;
+
+	gpiod_set_value(ddata->gpio[0], mode & 1);
+	gpiod_set_value(ddata->gpio[1], mode >> 1);
+
+	return 0;
+}
+
+static int cpcap_usb_set_uart_mode(struct cpcap_phy_ddata *ddata)
+{
+	int error;
+
+	/* Disable lines to prevent glitches from waking up mdm6600 */
+	error = cpcap_usb_gpio_set_mode(ddata, CPCAP_UNKNOWN_DISABLED);
+	if (error)
+		goto out_err;
+
+	if (ddata->pins_uart) {
+		error = pinctrl_select_state(ddata->pins, ddata->pins_uart);
+		if (error)
+			goto out_err;
+	}
+
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC1,
+				   CPCAP_BIT_VBUSPD,
+				   CPCAP_BIT_VBUSPD);
+	if (error)
+		goto out_err;
+
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC2,
+				   0xffff, CPCAP_BIT_UARTMUX0 |
+				   CPCAP_BIT_EMUMODE0);
+	if (error)
+		goto out_err;
+
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3, 0x7fff,
+				   CPCAP_BIT_IDPU_SPI);
+	if (error)
+		goto out_err;
+
+	/* Enable UART mode */
+	error = cpcap_usb_gpio_set_mode(ddata, CPCAP_DM_DP);
+	if (error)
+		goto out_err;
+
+	return 0;
+
+out_err:
+	dev_err(ddata->dev, "%s failed with %i\n", __func__, error);
+
+	return error;
+}
+
+static int cpcap_usb_set_usb_mode(struct cpcap_phy_ddata *ddata)
+{
+	int error;
+
+	/* Disable lines to prevent glitches from waking up mdm6600 */
+	error = cpcap_usb_gpio_set_mode(ddata, CPCAP_UNKNOWN_DISABLED);
+	if (error)
+		return error;
+
+	if (ddata->pins_utmi) {
+		error = pinctrl_select_state(ddata->pins, ddata->pins_utmi);
+		if (error) {
+			dev_err(ddata->dev, "could not set usb mode: %i\n",
+				error);
+
+			return error;
+		}
+	}
+
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC1,
+				   CPCAP_BIT_VBUSPD, 0);
+	if (error)
+		goto out_err;
+
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3,
+				   CPCAP_BIT_PU_SPI |
+				   CPCAP_BIT_DMPD_SPI |
+				   CPCAP_BIT_DPPD_SPI |
+				   CPCAP_BIT_SUSPEND_SPI |
+				   CPCAP_BIT_ULPI_SPI_SEL, 0);
+	if (error)
+		goto out_err;
+
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC2,
+				   CPCAP_BIT_USBXCVREN,
+				   CPCAP_BIT_USBXCVREN);
+	if (error)
+		goto out_err;
+
+	/* Enable USB mode */
+	error = cpcap_usb_gpio_set_mode(ddata, CPCAP_OTG_DM_DP);
+	if (error)
+		goto out_err;
+
+	return 0;
+
+out_err:
+	dev_err(ddata->dev, "%s failed with %i\n", __func__, error);
+
+	return error;
+}
+
+static int cpcap_usb_init_optional_pins(struct cpcap_phy_ddata *ddata)
+{
+	ddata->pins = devm_pinctrl_get(ddata->dev);
+	if (IS_ERR(ddata->pins)) {
+		dev_info(ddata->dev, "default pins not configured: %ld\n",
+			 PTR_ERR(ddata->pins));
+		ddata->pins = NULL;
+
+		return 0;
+	}
+
+	ddata->pins_ulpi = pinctrl_lookup_state(ddata->pins, "ulpi");
+	if (IS_ERR(ddata->pins_ulpi)) {
+		dev_info(ddata->dev, "ulpi pins not configured\n");
+		ddata->pins_ulpi = NULL;
+	}
+
+	ddata->pins_utmi = pinctrl_lookup_state(ddata->pins, "utmi");
+	if (IS_ERR(ddata->pins_utmi)) {
+		dev_info(ddata->dev, "utmi pins not configured\n");
+		ddata->pins_utmi = NULL;
+	}
+
+	ddata->pins_uart = pinctrl_lookup_state(ddata->pins, "uart");
+	if (IS_ERR(ddata->pins_uart)) {
+		dev_info(ddata->dev, "uart pins not configured\n");
+		ddata->pins_uart = NULL;
+	}
+
+	if (ddata->pins_uart)
+		return pinctrl_select_state(ddata->pins, ddata->pins_uart);
+
+	return 0;
+}
+
+static void cpcap_usb_init_optional_gpios(struct cpcap_phy_ddata *ddata)
+{
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		ddata->gpio[i] = devm_gpiod_get_index(ddata->dev, "mode",
+						      i, GPIOD_OUT_HIGH);
+		if (IS_ERR(ddata->gpio[i])) {
+			dev_info(ddata->dev, "no mode change GPIO%i: %li\n",
+				 i, PTR_ERR(ddata->gpio[i]));
+			ddata->gpio[i] = NULL;
+		}
+	}
+}
+
+static int cpcap_usb_init_iio(struct cpcap_phy_ddata *ddata)
+{
+	enum iio_chan_type type;
+	int error;
+
+	ddata->vbus = devm_iio_channel_get(ddata->dev, "vbus");
+	if (IS_ERR(ddata->vbus)) {
+		error = PTR_ERR(ddata->vbus);
+		goto out_err;
+	}
+
+	if (!ddata->vbus->indio_dev) {
+		error = -ENXIO;
+		goto out_err;
+	}
+
+	error = iio_get_channel_type(ddata->vbus, &type);
+	if (error < 0)
+		goto out_err;
+
+	if (type != IIO_VOLTAGE) {
+		error = -EINVAL;
+		goto out_err;
+	}
+
+	return 0;
+
+out_err:
+	dev_err(ddata->dev, "could not initialize VBUS or ID IIO: %i\n",
+		error);
+
+	return error;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id cpcap_usb_phy_id_table[] = {
+	{
+		.compatible = "motorola,cpcap-usb-phy",
+	},
+	{
+		.compatible = "motorola,mapphone-cpcap-usb-phy",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, cpcap_usb_phy_id_table);
+#endif
+
+static int cpcap_usb_phy_probe(struct platform_device *pdev)
+{
+	struct cpcap_phy_ddata *ddata;
+	struct phy *generic_phy;
+	struct phy_provider *phy_provider;
+	struct usb_otg *otg;
+	const struct of_device_id *of_id;
+	int error;
+
+	of_id = of_match_device(of_match_ptr(cpcap_usb_phy_id_table),
+				&pdev->dev);
+	if (!of_id)
+		return -EINVAL;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	ddata->reg = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!ddata->reg)
+		return -ENODEV;
+
+	otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
+	if (!otg)
+		return -ENOMEM;
+
+	ddata->dev = &pdev->dev;
+	ddata->phy.dev = ddata->dev;
+	ddata->phy.label = "cpcap_usb_phy";
+	ddata->phy.otg = otg;
+	ddata->phy.type = USB_PHY_TYPE_USB2;
+	otg->set_host = cpcap_usb_phy_set_host;
+	otg->set_peripheral = cpcap_usb_phy_set_peripheral;
+	otg->usb_phy = &ddata->phy;
+	INIT_DELAYED_WORK(&ddata->detect_work, cpcap_usb_detect);
+	platform_set_drvdata(pdev, ddata);
+
+	ddata->vusb = devm_regulator_get(&pdev->dev, "vusb");
+	if (IS_ERR(ddata->vusb))
+		return PTR_ERR(ddata->vusb);
+
+	error = regulator_enable(ddata->vusb);
+	if (error)
+		return error;
+
+	generic_phy = devm_phy_create(ddata->dev, NULL, &ops);
+	if (IS_ERR(generic_phy)) {
+		error = PTR_ERR(generic_phy);
+		goto out_reg_disable;
+	}
+
+	phy_set_drvdata(generic_phy, ddata);
+
+	phy_provider = devm_of_phy_provider_register(ddata->dev,
+						     of_phy_simple_xlate);
+	if (IS_ERR(phy_provider)) {
+		error = PTR_ERR(phy_provider);
+		goto out_reg_disable;
+	}
+
+	error = cpcap_usb_init_optional_pins(ddata);
+	if (error)
+		goto out_reg_disable;
+
+	cpcap_usb_init_optional_gpios(ddata);
+
+	error = cpcap_usb_init_iio(ddata);
+	if (error)
+		goto out_reg_disable;
+
+	error = cpcap_usb_init_interrupts(pdev, ddata);
+	if (error)
+		goto out_reg_disable;
+
+	usb_add_phy_dev(&ddata->phy);
+	atomic_set(&ddata->active, 1);
+	schedule_delayed_work(&ddata->detect_work, msecs_to_jiffies(1));
+
+	return 0;
+
+out_reg_disable:
+	regulator_disable(ddata->vusb);
+
+	return error;
+}
+
+static int cpcap_usb_phy_remove(struct platform_device *pdev)
+{
+	struct cpcap_phy_ddata *ddata = platform_get_drvdata(pdev);
+	int error;
+
+	atomic_set(&ddata->active, 0);
+	error = cpcap_usb_set_uart_mode(ddata);
+	if (error)
+		dev_err(ddata->dev, "could not set UART mode\n");
+
+	cpcap_usb_try_musb_mailbox(ddata, MUSB_VBUS_OFF);
+
+	usb_remove_phy(&ddata->phy);
+	cancel_delayed_work_sync(&ddata->detect_work);
+	regulator_disable(ddata->vusb);
+
+	return 0;
+}
+
+static struct platform_driver cpcap_usb_phy_driver = {
+	.probe		= cpcap_usb_phy_probe,
+	.remove		= cpcap_usb_phy_remove,
+	.driver		= {
+		.name	= "cpcap-usb-phy",
+		.of_match_table = of_match_ptr(cpcap_usb_phy_id_table),
+	},
+};
+
+module_platform_driver(cpcap_usb_phy_driver);
+
+MODULE_ALIAS("platform:cpcap_usb");
+MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
+MODULE_DESCRIPTION("CPCAP usb phy driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c
new file mode 100644
index 000000000..67802f9e4
--- /dev/null
+++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c
@@ -0,0 +1,673 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Motorola Mapphone MDM6600 modem GPIO controlled USB PHY driver
+ * Copyright (C) 2018 Tony Lindgren <tony@atomide.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/pinctrl/consumer.h>
+
+#define PHY_MDM6600_PHY_DELAY_MS	4000	/* PHY enable 2.2s to 3.5s */
+#define PHY_MDM6600_ENABLED_DELAY_MS	8000	/* 8s more total for MDM6600 */
+#define PHY_MDM6600_WAKE_KICK_MS	600	/* time on after GPIO toggle */
+#define MDM6600_MODEM_IDLE_DELAY_MS	1000	/* modem after USB suspend */
+#define MDM6600_MODEM_WAKE_DELAY_MS	200	/* modem response after idle */
+
+enum phy_mdm6600_ctrl_lines {
+	PHY_MDM6600_ENABLE,			/* USB PHY enable */
+	PHY_MDM6600_POWER,			/* Device power */
+	PHY_MDM6600_RESET,			/* Device reset */
+	PHY_MDM6600_NR_CTRL_LINES,
+};
+
+enum phy_mdm6600_bootmode_lines {
+	PHY_MDM6600_MODE0,			/* out USB mode0 and OOB wake */
+	PHY_MDM6600_MODE1,			/* out USB mode1, in OOB wake */
+	PHY_MDM6600_NR_MODE_LINES,
+};
+
+enum phy_mdm6600_cmd_lines {
+	PHY_MDM6600_CMD0,
+	PHY_MDM6600_CMD1,
+	PHY_MDM6600_CMD2,
+	PHY_MDM6600_NR_CMD_LINES,
+};
+
+enum phy_mdm6600_status_lines {
+	PHY_MDM6600_STATUS0,
+	PHY_MDM6600_STATUS1,
+	PHY_MDM6600_STATUS2,
+	PHY_MDM6600_NR_STATUS_LINES,
+};
+
+/*
+ * MDM6600 command codes. These are based on Motorola Mapphone Linux
+ * kernel tree.
+ */
+enum phy_mdm6600_cmd {
+	PHY_MDM6600_CMD_BP_PANIC_ACK,
+	PHY_MDM6600_CMD_DATA_ONLY_BYPASS,	/* Reroute USB to CPCAP PHY */
+	PHY_MDM6600_CMD_FULL_BYPASS,		/* Reroute USB to CPCAP PHY */
+	PHY_MDM6600_CMD_NO_BYPASS,		/* Request normal USB mode */
+	PHY_MDM6600_CMD_BP_SHUTDOWN_REQ,	/* Request device power off */
+	PHY_MDM6600_CMD_BP_UNKNOWN_5,
+	PHY_MDM6600_CMD_BP_UNKNOWN_6,
+	PHY_MDM6600_CMD_UNDEFINED,
+};
+
+/*
+ * MDM6600 status codes. These are based on Motorola Mapphone Linux
+ * kernel tree.
+ */
+enum phy_mdm6600_status {
+	PHY_MDM6600_STATUS_PANIC,		/* Seems to be really off */
+	PHY_MDM6600_STATUS_PANIC_BUSY_WAIT,
+	PHY_MDM6600_STATUS_QC_DLOAD,
+	PHY_MDM6600_STATUS_RAM_DOWNLOADER,	/* MDM6600 USB flashing mode */
+	PHY_MDM6600_STATUS_PHONE_CODE_AWAKE,	/* MDM6600 normal USB mode */
+	PHY_MDM6600_STATUS_PHONE_CODE_ASLEEP,
+	PHY_MDM6600_STATUS_SHUTDOWN_ACK,
+	PHY_MDM6600_STATUS_UNDEFINED,
+};
+
+static const char * const
+phy_mdm6600_status_name[] = {
+	"off", "busy", "qc_dl", "ram_dl", "awake",
+	"asleep", "shutdown", "undefined",
+};
+
+struct phy_mdm6600 {
+	struct device *dev;
+	struct phy *generic_phy;
+	struct phy_provider *phy_provider;
+	struct gpio_desc *ctrl_gpios[PHY_MDM6600_NR_CTRL_LINES];
+	struct gpio_descs *mode_gpios;
+	struct gpio_descs *status_gpios;
+	struct gpio_descs *cmd_gpios;
+	struct delayed_work bootup_work;
+	struct delayed_work status_work;
+	struct delayed_work modem_wake_work;
+	struct completion ack;
+	bool enabled;				/* mdm6600 phy enabled */
+	bool running;				/* mdm6600 boot done */
+	bool awake;				/* mdm6600 respnds on n_gsm */
+	int status;
+};
+
+static int phy_mdm6600_init(struct phy *x)
+{
+	struct phy_mdm6600 *ddata = phy_get_drvdata(x);
+	struct gpio_desc *enable_gpio = ddata->ctrl_gpios[PHY_MDM6600_ENABLE];
+
+	if (!ddata->enabled)
+		return -EPROBE_DEFER;
+
+	gpiod_set_value_cansleep(enable_gpio, 0);
+
+	return 0;
+}
+
+static int phy_mdm6600_power_on(struct phy *x)
+{
+	struct phy_mdm6600 *ddata = phy_get_drvdata(x);
+	struct gpio_desc *enable_gpio = ddata->ctrl_gpios[PHY_MDM6600_ENABLE];
+
+	if (!ddata->enabled)
+		return -ENODEV;
+
+	gpiod_set_value_cansleep(enable_gpio, 1);
+
+	/* Allow aggressive PM for USB, it's only needed for n_gsm port */
+	if (pm_runtime_enabled(&x->dev))
+		phy_pm_runtime_put(x);
+
+	return 0;
+}
+
+static int phy_mdm6600_power_off(struct phy *x)
+{
+	struct phy_mdm6600 *ddata = phy_get_drvdata(x);
+	struct gpio_desc *enable_gpio = ddata->ctrl_gpios[PHY_MDM6600_ENABLE];
+	int error;
+
+	if (!ddata->enabled)
+		return -ENODEV;
+
+	/* Paired with phy_pm_runtime_put() in phy_mdm6600_power_on() */
+	if (pm_runtime_enabled(&x->dev)) {
+		error = phy_pm_runtime_get(x);
+		if (error < 0 && error != -EINPROGRESS)
+			dev_warn(ddata->dev, "%s: phy_pm_runtime_get: %i\n",
+				 __func__, error);
+	}
+
+	gpiod_set_value_cansleep(enable_gpio, 0);
+
+	return 0;
+}
+
+static const struct phy_ops gpio_usb_ops = {
+	.init = phy_mdm6600_init,
+	.power_on = phy_mdm6600_power_on,
+	.power_off = phy_mdm6600_power_off,
+	.owner = THIS_MODULE,
+};
+
+/**
+ * phy_mdm6600_cmd() - send a command request to mdm6600
+ * @ddata: device driver data
+ * @val: value of cmd to be set
+ *
+ * Configures the three command request GPIOs to the specified value.
+ */
+static void phy_mdm6600_cmd(struct phy_mdm6600 *ddata, int val)
+{
+	DECLARE_BITMAP(values, PHY_MDM6600_NR_CMD_LINES);
+
+	values[0] = val;
+
+	gpiod_set_array_value_cansleep(PHY_MDM6600_NR_CMD_LINES,
+				       ddata->cmd_gpios->desc,
+				       ddata->cmd_gpios->info, values);
+}
+
+/**
+ * phy_mdm6600_status() - read mdm6600 status lines
+ * @work: work structure
+ */
+static void phy_mdm6600_status(struct work_struct *work)
+{
+	struct phy_mdm6600 *ddata;
+	struct device *dev;
+	DECLARE_BITMAP(values, PHY_MDM6600_NR_STATUS_LINES);
+	int error;
+
+	ddata = container_of(work, struct phy_mdm6600, status_work.work);
+	dev = ddata->dev;
+
+	error = gpiod_get_array_value_cansleep(PHY_MDM6600_NR_STATUS_LINES,
+					       ddata->status_gpios->desc,
+					       ddata->status_gpios->info,
+					       values);
+	if (error)
+		return;
+
+	ddata->status = values[0] & ((1 << PHY_MDM6600_NR_STATUS_LINES) - 1);
+
+	dev_info(dev, "modem status: %i %s\n",
+		 ddata->status,
+		 phy_mdm6600_status_name[ddata->status]);
+	complete(&ddata->ack);
+}
+
+static irqreturn_t phy_mdm6600_irq_thread(int irq, void *data)
+{
+	struct phy_mdm6600 *ddata = data;
+
+	schedule_delayed_work(&ddata->status_work, msecs_to_jiffies(10));
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * phy_mdm6600_wakeirq_thread - handle mode1 line OOB wake after booting
+ * @irq: interrupt
+ * @data: interrupt handler data
+ *
+ * GPIO mode1 is used initially as output to configure the USB boot
+ * mode for mdm6600. After booting it is used as input for OOB wake
+ * signal from mdm6600 to the SoC. Just use it for debug info only
+ * for now.
+ */
+static irqreturn_t phy_mdm6600_wakeirq_thread(int irq, void *data)
+{
+	struct phy_mdm6600 *ddata = data;
+	struct gpio_desc *mode_gpio1;
+	int error, wakeup;
+
+	mode_gpio1 = ddata->mode_gpios->desc[PHY_MDM6600_MODE1];
+	wakeup = gpiod_get_value(mode_gpio1);
+	if (!wakeup)
+		return IRQ_NONE;
+
+	dev_dbg(ddata->dev, "OOB wake on mode_gpio1: %i\n", wakeup);
+	error = pm_runtime_get_sync(ddata->dev);
+	if (error < 0) {
+		pm_runtime_put_noidle(ddata->dev);
+
+		return IRQ_NONE;
+	}
+
+	/* Just wake-up and kick the autosuspend timer */
+	pm_runtime_mark_last_busy(ddata->dev);
+	pm_runtime_put_autosuspend(ddata->dev);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * phy_mdm6600_init_irq() - initialize mdm6600 status IRQ lines
+ * @ddata: device driver data
+ */
+static void phy_mdm6600_init_irq(struct phy_mdm6600 *ddata)
+{
+	struct device *dev = ddata->dev;
+	int i, error, irq;
+
+	for (i = PHY_MDM6600_STATUS0;
+	     i <= PHY_MDM6600_STATUS2; i++) {
+		struct gpio_desc *gpio = ddata->status_gpios->desc[i];
+
+		irq = gpiod_to_irq(gpio);
+		if (irq <= 0)
+			continue;
+
+		error = devm_request_threaded_irq(dev, irq, NULL,
+					phy_mdm6600_irq_thread,
+					IRQF_TRIGGER_RISING |
+					IRQF_TRIGGER_FALLING |
+					IRQF_ONESHOT,
+					"mdm6600",
+					ddata);
+		if (error)
+			dev_warn(dev, "no modem status irq%i: %i\n",
+				 irq, error);
+	}
+}
+
+struct phy_mdm6600_map {
+	const char *name;
+	int direction;
+};
+
+static const struct phy_mdm6600_map
+phy_mdm6600_ctrl_gpio_map[PHY_MDM6600_NR_CTRL_LINES] = {
+	{ "enable", GPIOD_OUT_LOW, },		/* low = phy disabled */
+	{ "power", GPIOD_OUT_LOW, },		/* low = off */
+	{ "reset", GPIOD_OUT_HIGH, },		/* high = reset */
+};
+
+/**
+ * phy_mdm6600_init_lines() - initialize mdm6600 GPIO lines
+ * @ddata: device driver data
+ */
+static int phy_mdm6600_init_lines(struct phy_mdm6600 *ddata)
+{
+	struct device *dev = ddata->dev;
+	int i;
+
+	/* MDM6600 control lines */
+	for (i = 0; i < ARRAY_SIZE(phy_mdm6600_ctrl_gpio_map); i++) {
+		const struct phy_mdm6600_map *map =
+			&phy_mdm6600_ctrl_gpio_map[i];
+		struct gpio_desc **gpio = &ddata->ctrl_gpios[i];
+
+		*gpio = devm_gpiod_get(dev, map->name, map->direction);
+		if (IS_ERR(*gpio)) {
+			dev_info(dev, "gpio %s error %li\n",
+				 map->name, PTR_ERR(*gpio));
+			return PTR_ERR(*gpio);
+		}
+	}
+
+	/* MDM6600 USB start-up mode output lines */
+	ddata->mode_gpios = devm_gpiod_get_array(dev, "motorola,mode",
+						 GPIOD_OUT_LOW);
+	if (IS_ERR(ddata->mode_gpios))
+		return PTR_ERR(ddata->mode_gpios);
+
+	if (ddata->mode_gpios->ndescs != PHY_MDM6600_NR_MODE_LINES)
+		return -EINVAL;
+
+	/* MDM6600 status input lines */
+	ddata->status_gpios = devm_gpiod_get_array(dev, "motorola,status",
+						   GPIOD_IN);
+	if (IS_ERR(ddata->status_gpios))
+		return PTR_ERR(ddata->status_gpios);
+
+	if (ddata->status_gpios->ndescs != PHY_MDM6600_NR_STATUS_LINES)
+		return -EINVAL;
+
+	/* MDM6600 cmd output lines */
+	ddata->cmd_gpios = devm_gpiod_get_array(dev, "motorola,cmd",
+						GPIOD_OUT_LOW);
+	if (IS_ERR(ddata->cmd_gpios))
+		return PTR_ERR(ddata->cmd_gpios);
+
+	if (ddata->cmd_gpios->ndescs != PHY_MDM6600_NR_CMD_LINES)
+		return -EINVAL;
+
+	return 0;
+}
+
+/**
+ * phy_mdm6600_device_power_on() - power on mdm6600 device
+ * @ddata: device driver data
+ *
+ * To get the integrated USB phy in MDM6600 takes some hoops. We must ensure
+ * the shared USB bootmode GPIOs are configured, then request modem start-up,
+ * reset and power-up.. And then we need to recycle the shared USB bootmode
+ * GPIOs as they are also used for Out of Band (OOB) wake for the USB and
+ * TS 27.010 serial mux.
+ */
+static int phy_mdm6600_device_power_on(struct phy_mdm6600 *ddata)
+{
+	struct gpio_desc *mode_gpio0, *mode_gpio1, *reset_gpio, *power_gpio;
+	int error = 0, wakeirq;
+
+	mode_gpio0 = ddata->mode_gpios->desc[PHY_MDM6600_MODE0];
+	mode_gpio1 = ddata->mode_gpios->desc[PHY_MDM6600_MODE1];
+	reset_gpio = ddata->ctrl_gpios[PHY_MDM6600_RESET];
+	power_gpio = ddata->ctrl_gpios[PHY_MDM6600_POWER];
+
+	/*
+	 * Shared GPIOs must be low for normal USB mode. After booting
+	 * they are used for OOB wake signaling. These can be also used
+	 * to configure USB flashing mode later on based on a module
+	 * parameter.
+	 */
+	gpiod_set_value_cansleep(mode_gpio0, 0);
+	gpiod_set_value_cansleep(mode_gpio1, 0);
+
+	/* Request start-up mode */
+	phy_mdm6600_cmd(ddata, PHY_MDM6600_CMD_NO_BYPASS);
+
+	/* Request a reset first */
+	gpiod_set_value_cansleep(reset_gpio, 0);
+	msleep(100);
+
+	/* Toggle power GPIO to request mdm6600 to start */
+	gpiod_set_value_cansleep(power_gpio, 1);
+	msleep(100);
+	gpiod_set_value_cansleep(power_gpio, 0);
+
+	/*
+	 * Looks like the USB PHY needs between 2.2 to 4 seconds.
+	 * If we try to use it before that, we will get L3 errors
+	 * from omap-usb-host trying to access the PHY. See also
+	 * phy_mdm6600_init() for -EPROBE_DEFER.
+	 */
+	msleep(PHY_MDM6600_PHY_DELAY_MS);
+	ddata->enabled = true;
+
+	/* Booting up the rest of MDM6600 will take total about 8 seconds */
+	dev_info(ddata->dev, "Waiting for power up request to complete..\n");
+	if (wait_for_completion_timeout(&ddata->ack,
+			msecs_to_jiffies(PHY_MDM6600_ENABLED_DELAY_MS))) {
+		if (ddata->status > PHY_MDM6600_STATUS_PANIC &&
+		    ddata->status < PHY_MDM6600_STATUS_SHUTDOWN_ACK)
+			dev_info(ddata->dev, "Powered up OK\n");
+	} else {
+		ddata->enabled = false;
+		error = -ETIMEDOUT;
+		dev_err(ddata->dev, "Timed out powering up\n");
+	}
+
+	/* Reconfigure mode1 GPIO as input for OOB wake */
+	gpiod_direction_input(mode_gpio1);
+
+	wakeirq = gpiod_to_irq(mode_gpio1);
+	if (wakeirq <= 0)
+		return wakeirq;
+
+	error = devm_request_threaded_irq(ddata->dev, wakeirq, NULL,
+					  phy_mdm6600_wakeirq_thread,
+					  IRQF_TRIGGER_RISING |
+					  IRQF_TRIGGER_FALLING |
+					  IRQF_ONESHOT,
+					  "mdm6600-wake",
+					  ddata);
+	if (error)
+		dev_warn(ddata->dev, "no modem wakeirq irq%i: %i\n",
+			 wakeirq, error);
+
+	ddata->running = true;
+
+	return error;
+}
+
+/**
+ * phy_mdm6600_device_power_off() - power off mdm6600 device
+ * @ddata: device driver data
+ */
+static void phy_mdm6600_device_power_off(struct phy_mdm6600 *ddata)
+{
+	struct gpio_desc *reset_gpio =
+		ddata->ctrl_gpios[PHY_MDM6600_RESET];
+	int error;
+
+	ddata->enabled = false;
+	phy_mdm6600_cmd(ddata, PHY_MDM6600_CMD_BP_SHUTDOWN_REQ);
+	msleep(100);
+
+	gpiod_set_value_cansleep(reset_gpio, 1);
+
+	dev_info(ddata->dev, "Waiting for power down request to complete.. ");
+	if (wait_for_completion_timeout(&ddata->ack,
+					msecs_to_jiffies(5000))) {
+		if (ddata->status == PHY_MDM6600_STATUS_PANIC)
+			dev_info(ddata->dev, "Powered down OK\n");
+	} else {
+		dev_err(ddata->dev, "Timed out powering down\n");
+	}
+
+	/*
+	 * Keep reset gpio high with padconf internal pull-up resistor to
+	 * prevent modem from waking up during deeper SoC idle states. The
+	 * gpio bank lines can have glitches if not in the always-on wkup
+	 * domain.
+	 */
+	error = pinctrl_pm_select_sleep_state(ddata->dev);
+	if (error)
+		dev_warn(ddata->dev, "%s: error with sleep_state: %i\n",
+			 __func__, error);
+}
+
+static void phy_mdm6600_deferred_power_on(struct work_struct *work)
+{
+	struct phy_mdm6600 *ddata;
+	int error;
+
+	ddata = container_of(work, struct phy_mdm6600, bootup_work.work);
+
+	error = phy_mdm6600_device_power_on(ddata);
+	if (error)
+		dev_err(ddata->dev, "Device not functional\n");
+}
+
+/*
+ * USB suspend puts mdm6600 into low power mode. For any n_gsm using apps,
+ * we need to keep the modem awake by kicking it's mode0 GPIO. This will
+ * keep the modem awake for about 1.2 seconds. When no n_gsm apps are using
+ * the modem, runtime PM auto mode can be enabled so modem can enter low
+ * power mode.
+ */
+static void phy_mdm6600_wake_modem(struct phy_mdm6600 *ddata)
+{
+	struct gpio_desc *mode_gpio0;
+
+	mode_gpio0 = ddata->mode_gpios->desc[PHY_MDM6600_MODE0];
+	gpiod_set_value_cansleep(mode_gpio0, 1);
+	usleep_range(5, 15);
+	gpiod_set_value_cansleep(mode_gpio0, 0);
+	if (ddata->awake)
+		usleep_range(5, 15);
+	else
+		msleep(MDM6600_MODEM_WAKE_DELAY_MS);
+}
+
+static void phy_mdm6600_modem_wake(struct work_struct *work)
+{
+	struct phy_mdm6600 *ddata;
+
+	ddata = container_of(work, struct phy_mdm6600, modem_wake_work.work);
+	phy_mdm6600_wake_modem(ddata);
+
+	/*
+	 * The modem does not always stay awake 1.2 seconds after toggling
+	 * the wake GPIO, and sometimes it idles after about some 600 ms
+	 * making writes time out.
+	 */
+	schedule_delayed_work(&ddata->modem_wake_work,
+			      msecs_to_jiffies(PHY_MDM6600_WAKE_KICK_MS));
+}
+
+static int __maybe_unused phy_mdm6600_runtime_suspend(struct device *dev)
+{
+	struct phy_mdm6600 *ddata = dev_get_drvdata(dev);
+
+	cancel_delayed_work_sync(&ddata->modem_wake_work);
+	ddata->awake = false;
+
+	return 0;
+}
+
+static int __maybe_unused phy_mdm6600_runtime_resume(struct device *dev)
+{
+	struct phy_mdm6600 *ddata = dev_get_drvdata(dev);
+
+	phy_mdm6600_modem_wake(&ddata->modem_wake_work.work);
+	ddata->awake = true;
+
+	return 0;
+}
+
+static const struct dev_pm_ops phy_mdm6600_pm_ops = {
+	SET_RUNTIME_PM_OPS(phy_mdm6600_runtime_suspend,
+			   phy_mdm6600_runtime_resume, NULL)
+};
+
+static const struct of_device_id phy_mdm6600_id_table[] = {
+	{ .compatible = "motorola,mapphone-mdm6600", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, phy_mdm6600_id_table);
+
+static int phy_mdm6600_probe(struct platform_device *pdev)
+{
+	struct phy_mdm6600 *ddata;
+	int error;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	INIT_DELAYED_WORK(&ddata->bootup_work,
+			  phy_mdm6600_deferred_power_on);
+	INIT_DELAYED_WORK(&ddata->status_work, phy_mdm6600_status);
+	INIT_DELAYED_WORK(&ddata->modem_wake_work, phy_mdm6600_modem_wake);
+	init_completion(&ddata->ack);
+
+	ddata->dev = &pdev->dev;
+	platform_set_drvdata(pdev, ddata);
+
+	error = phy_mdm6600_init_lines(ddata);
+	if (error)
+		return error;
+
+	phy_mdm6600_init_irq(ddata);
+	schedule_delayed_work(&ddata->bootup_work, 0);
+
+	/*
+	 * See phy_mdm6600_device_power_on(). We should be able
+	 * to remove this eventually when ohci-platform can deal
+	 * with -EPROBE_DEFER.
+	 */
+	msleep(PHY_MDM6600_PHY_DELAY_MS + 500);
+
+	/*
+	 * Enable PM runtime only after PHY has been powered up properly.
+	 * It is currently only needed after USB suspends mdm6600 and n_gsm
+	 * needs to access the device. We don't want to do this earlier as
+	 * gpio mode0 pin doubles as mdm6600 wake-up gpio.
+	 */
+	pm_runtime_use_autosuspend(ddata->dev);
+	pm_runtime_set_autosuspend_delay(ddata->dev,
+					 MDM6600_MODEM_IDLE_DELAY_MS);
+	pm_runtime_enable(ddata->dev);
+	error = pm_runtime_get_sync(ddata->dev);
+	if (error < 0) {
+		dev_warn(ddata->dev, "failed to wake modem: %i\n", error);
+		pm_runtime_put_noidle(ddata->dev);
+		goto cleanup;
+	}
+
+	ddata->generic_phy = devm_phy_create(ddata->dev, NULL, &gpio_usb_ops);
+	if (IS_ERR(ddata->generic_phy)) {
+		error = PTR_ERR(ddata->generic_phy);
+		goto idle;
+	}
+
+	phy_set_drvdata(ddata->generic_phy, ddata);
+
+	ddata->phy_provider =
+		devm_of_phy_provider_register(ddata->dev,
+					      of_phy_simple_xlate);
+	if (IS_ERR(ddata->phy_provider))
+		error = PTR_ERR(ddata->phy_provider);
+
+idle:
+	pm_runtime_mark_last_busy(ddata->dev);
+	pm_runtime_put_autosuspend(ddata->dev);
+
+cleanup:
+	if (error < 0) {
+		phy_mdm6600_device_power_off(ddata);
+		pm_runtime_disable(ddata->dev);
+		pm_runtime_dont_use_autosuspend(ddata->dev);
+	}
+
+	return error;
+}
+
+static int phy_mdm6600_remove(struct platform_device *pdev)
+{
+	struct phy_mdm6600 *ddata = platform_get_drvdata(pdev);
+	struct gpio_desc *reset_gpio = ddata->ctrl_gpios[PHY_MDM6600_RESET];
+
+	pm_runtime_get_noresume(ddata->dev);
+	pm_runtime_dont_use_autosuspend(ddata->dev);
+	pm_runtime_put_sync(ddata->dev);
+	pm_runtime_disable(ddata->dev);
+
+	if (!ddata->running)
+		wait_for_completion_timeout(&ddata->ack,
+			msecs_to_jiffies(PHY_MDM6600_ENABLED_DELAY_MS));
+
+	gpiod_set_value_cansleep(reset_gpio, 1);
+	phy_mdm6600_device_power_off(ddata);
+
+	cancel_delayed_work_sync(&ddata->modem_wake_work);
+	cancel_delayed_work_sync(&ddata->bootup_work);
+	cancel_delayed_work_sync(&ddata->status_work);
+
+	return 0;
+}
+
+static struct platform_driver phy_mdm6600_driver = {
+	.probe = phy_mdm6600_probe,
+	.remove = phy_mdm6600_remove,
+	.driver = {
+		.name = "phy-mapphone-mdm6600",
+		.pm = &phy_mdm6600_pm_ops,
+		.of_match_table = of_match_ptr(phy_mdm6600_id_table),
+	},
+};
+
+module_platform_driver(phy_mdm6600_driver);
+
+MODULE_ALIAS("platform:gpio_usb");
+MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
+MODULE_DESCRIPTION("mdm6600 gpio usb phy driver");
+MODULE_LICENSE("GPL v2");