Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 876 insertions, 0 deletions

diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
new file mode 100644
index 000000000..7c3ea68e5
--- /dev/null
+++ b/drivers/tty/serial/8250/serial_cs.c
@@ -0,0 +1,876 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MPL-1.1)
+/*======================================================================
+
+    A driver for PCMCIA serial devices
+
+    serial_cs.c 1.134 2002/05/04 05:48:53
+
+    The contents of this file are subject to the Mozilla Public
+    License Version 1.1 (the "License"); you may not use this file
+    except in compliance with the License. You may obtain a copy of
+    the License at http://www.mozilla.org/MPL/
+
+    Software distributed under the License is distributed on an "AS
+    IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+    implied. See the License for the specific language governing
+    rights and limitations under the License.
+
+    The initial developer of the original code is David A. Hinds
+    <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+    are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+
+    Alternatively, the contents of this file may be used under the
+    terms of the GNU General Public License version 2 (the "GPL"), in which
+    case the provisions of the GPL are applicable instead of the
+    above.  If you wish to allow the use of your version of this file
+    only under the terms of the GPL and not to allow others to use
+    your version of this file under the MPL, indicate your decision
+    by deleting the provisions above and replace them with the notice
+    and other provisions required by the GPL.  If you do not delete
+    the provisions above, a recipient may use your version of this
+    file under either the MPL or the GPL.
+
+======================================================================*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/serial_core.h>
+#include <linux/delay.h>
+#include <linux/major.h>
+#include <asm/io.h>
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ciscode.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/cisreg.h>
+
+#include "8250.h"
+
+
+/*====================================================================*/
+
+/* Parameters that can be set with 'insmod' */
+
+/* Enable the speaker? */
+static int do_sound = 1;
+/* Skip strict UART tests? */
+static int buggy_uart;
+
+module_param(do_sound, int, 0444);
+module_param(buggy_uart, int, 0444);
+
+/*====================================================================*/
+
+/* Table of multi-port card ID's */
+
+struct serial_quirk {
+	unsigned int manfid;
+	unsigned int prodid;
+	int multi;		/* 1 = multifunction, > 1 = # ports */
+	void (*config)(struct pcmcia_device *);
+	void (*setup)(struct pcmcia_device *, struct uart_8250_port *);
+	void (*wakeup)(struct pcmcia_device *);
+	int (*post)(struct pcmcia_device *);
+};
+
+struct serial_info {
+	struct pcmcia_device	*p_dev;
+	int			ndev;
+	int			multi;
+	int			slave;
+	int			manfid;
+	int			prodid;
+	int			c950ctrl;
+	int			line[4];
+	const struct serial_quirk *quirk;
+};
+
+struct serial_cfg_mem {
+	tuple_t tuple;
+	cisparse_t parse;
+	u_char buf[256];
+};
+
+/*
+ * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6"
+ * manfid 0x0160, 0x0104
+ * This card appears to have a 14.7456MHz clock.
+ */
+/* Generic Modem: MD55x (GPRS/EDGE) have
+ * Elan VPU16551 UART with 14.7456MHz oscillator
+ * manfid 0x015D, 0x4C45
+ */
+static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_8250_port *uart)
+{
+	uart->port.uartclk = 14745600;
+}
+
+static int quirk_post_ibm(struct pcmcia_device *link)
+{
+	u8 val;
+	int ret;
+
+	ret = pcmcia_read_config_byte(link, 0x800, &val);
+	if (ret)
+		goto failed;
+
+	ret = pcmcia_write_config_byte(link, 0x800, val | 1);
+	if (ret)
+		goto failed;
+	return 0;
+
+ failed:
+	return -ENODEV;
+}
+
+/*
+ * Nokia cards are not really multiport cards.  Shouldn't this
+ * be handled by setting the quirk entry .multi = 0 | 1 ?
+ */
+static void quirk_config_nokia(struct pcmcia_device *link)
+{
+	struct serial_info *info = link->priv;
+
+	if (info->multi > 1)
+		info->multi = 1;
+}
+
+static void quirk_wakeup_oxsemi(struct pcmcia_device *link)
+{
+	struct serial_info *info = link->priv;
+
+	if (info->c950ctrl)
+		outb(12, info->c950ctrl + 1);
+}
+
+/* request_region? oxsemi branch does no request_region too... */
+/*
+ * This sequence is needed to properly initialize MC45 attached to OXCF950.
+ * I tried decreasing these msleep()s, but it worked properly (survived
+ * 1000 stop/start operations) with these timeouts (or bigger).
+ */
+static void quirk_wakeup_possio_gcc(struct pcmcia_device *link)
+{
+	struct serial_info *info = link->priv;
+	unsigned int ctrl = info->c950ctrl;
+
+	outb(0xA, ctrl + 1);
+	msleep(100);
+	outb(0xE, ctrl + 1);
+	msleep(300);
+	outb(0xC, ctrl + 1);
+	msleep(100);
+	outb(0xE, ctrl + 1);
+	msleep(200);
+	outb(0xF, ctrl + 1);
+	msleep(100);
+	outb(0xE, ctrl + 1);
+	msleep(100);
+	outb(0xC, ctrl + 1);
+}
+
+/*
+ * Socket Dual IO: this enables irq's for second port
+ */
+static void quirk_config_socket(struct pcmcia_device *link)
+{
+	struct serial_info *info = link->priv;
+
+	if (info->multi)
+		link->config_flags |= CONF_ENABLE_ESR;
+}
+
+static const struct serial_quirk quirks[] = {
+	{
+		.manfid	= 0x0160,
+		.prodid	= 0x0104,
+		.multi	= -1,
+		.setup	= quirk_setup_brainboxes_0104,
+	}, {
+		.manfid	= 0x015D,
+		.prodid	= 0x4C45,
+		.multi	= -1,
+		.setup	= quirk_setup_brainboxes_0104,
+	}, {
+		.manfid	= MANFID_IBM,
+		.prodid	= ~0,
+		.multi	= -1,
+		.post	= quirk_post_ibm,
+	}, {
+		.manfid	= MANFID_INTEL,
+		.prodid	= PRODID_INTEL_DUAL_RS232,
+		.multi	= 2,
+	}, {
+		.manfid	= MANFID_NATINST,
+		.prodid	= PRODID_NATINST_QUAD_RS232,
+		.multi	= 4,
+	}, {
+		.manfid	= MANFID_NOKIA,
+		.prodid	= ~0,
+		.multi	= -1,
+		.config	= quirk_config_nokia,
+	}, {
+		.manfid	= MANFID_OMEGA,
+		.prodid	= PRODID_OMEGA_QSP_100,
+		.multi	= 4,
+	}, {
+		.manfid	= MANFID_OXSEMI,
+		.prodid	= ~0,
+		.multi	= -1,
+		.wakeup	= quirk_wakeup_oxsemi,
+	}, {
+		.manfid	= MANFID_POSSIO,
+		.prodid	= PRODID_POSSIO_GCC,
+		.multi	= -1,
+		.wakeup	= quirk_wakeup_possio_gcc,
+	}, {
+		.manfid	= MANFID_QUATECH,
+		.prodid	= PRODID_QUATECH_DUAL_RS232,
+		.multi	= 2,
+	}, {
+		.manfid	= MANFID_QUATECH,
+		.prodid	= PRODID_QUATECH_DUAL_RS232_D1,
+		.multi	= 2,
+	}, {
+		.manfid	= MANFID_QUATECH,
+		.prodid	= PRODID_QUATECH_DUAL_RS232_G,
+		.multi	= 2,
+	}, {
+		.manfid	= MANFID_QUATECH,
+		.prodid	= PRODID_QUATECH_QUAD_RS232,
+		.multi	= 4,
+	}, {
+		.manfid	= MANFID_SOCKET,
+		.prodid	= PRODID_SOCKET_DUAL_RS232,
+		.multi	= 2,
+		.config	= quirk_config_socket,
+	}, {
+		.manfid	= MANFID_SOCKET,
+		.prodid	= ~0,
+		.multi	= -1,
+		.config	= quirk_config_socket,
+	}
+};
+
+
+static int serial_config(struct pcmcia_device *link);
+
+
+static void serial_remove(struct pcmcia_device *link)
+{
+	struct serial_info *info = link->priv;
+	int i;
+
+	dev_dbg(&link->dev, "serial_release\n");
+
+	/*
+	 * Recheck to see if the device is still configured.
+	 */
+	for (i = 0; i < info->ndev; i++)
+		serial8250_unregister_port(info->line[i]);
+
+	if (!info->slave)
+		pcmcia_disable_device(link);
+}
+
+static int serial_suspend(struct pcmcia_device *link)
+{
+	struct serial_info *info = link->priv;
+	int i;
+
+	for (i = 0; i < info->ndev; i++)
+		serial8250_suspend_port(info->line[i]);
+
+	return 0;
+}
+
+static int serial_resume(struct pcmcia_device *link)
+{
+	struct serial_info *info = link->priv;
+	int i;
+
+	for (i = 0; i < info->ndev; i++)
+		serial8250_resume_port(info->line[i]);
+
+	if (info->quirk && info->quirk->wakeup)
+		info->quirk->wakeup(link);
+
+	return 0;
+}
+
+static int serial_probe(struct pcmcia_device *link)
+{
+	struct serial_info *info;
+	int ret;
+
+	dev_dbg(&link->dev, "serial_attach()\n");
+
+	/* Create new serial device */
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+	info->p_dev = link;
+	link->priv = info;
+
+	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
+	if (do_sound)
+		link->config_flags |= CONF_ENABLE_SPKR;
+
+	ret = serial_config(link);
+	if (ret)
+		goto free_info;
+
+	return 0;
+
+free_info:
+	kfree(info);
+	return ret;
+}
+
+static void serial_detach(struct pcmcia_device *link)
+{
+	struct serial_info *info = link->priv;
+
+	dev_dbg(&link->dev, "serial_detach\n");
+
+	/*
+	 * Ensure that the ports have been released.
+	 */
+	serial_remove(link);
+
+	/* free bits */
+	kfree(info);
+}
+
+/*====================================================================*/
+
+static int setup_serial(struct pcmcia_device *handle, struct serial_info *info,
+			unsigned int iobase, int irq)
+{
+	struct uart_8250_port uart;
+	int line;
+
+	memset(&uart, 0, sizeof(uart));
+	uart.port.iobase = iobase;
+	uart.port.irq = irq;
+	uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+	uart.port.uartclk = 1843200;
+	uart.port.dev = &handle->dev;
+	if (buggy_uart)
+		uart.port.flags |= UPF_BUGGY_UART;
+
+	if (info->quirk && info->quirk->setup)
+		info->quirk->setup(handle, &uart);
+
+	line = serial8250_register_8250_port(&uart);
+	if (line < 0) {
+		pr_err("serial_cs: serial8250_register_8250_port() at 0x%04lx, irq %d failed\n",
+							(unsigned long)iobase, irq);
+		return -EINVAL;
+	}
+
+	info->line[info->ndev] = line;
+	info->ndev++;
+
+	return 0;
+}
+
+/*====================================================================*/
+
+static int pfc_config(struct pcmcia_device *p_dev)
+{
+	unsigned int port = 0;
+	struct serial_info *info = p_dev->priv;
+
+	if ((p_dev->resource[1]->end != 0) &&
+		(resource_size(p_dev->resource[1]) == 8)) {
+		port = p_dev->resource[1]->start;
+		info->slave = 1;
+	} else if ((info->manfid == MANFID_OSITECH) &&
+		(resource_size(p_dev->resource[0]) == 0x40)) {
+		port = p_dev->resource[0]->start + 0x28;
+		info->slave = 1;
+	}
+	if (info->slave)
+		return setup_serial(p_dev, info, port, p_dev->irq);
+
+	dev_warn(&p_dev->dev, "no usable port range found, giving up\n");
+	return -ENODEV;
+}
+
+static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data)
+{
+	static const int size_table[2] = { 8, 16 };
+	int *try = priv_data;
+
+	if (p_dev->resource[0]->start == 0)
+		return -ENODEV;
+
+	if ((*try & 0x1) == 0)
+		p_dev->io_lines = 16;
+
+	if (p_dev->resource[0]->end != size_table[(*try >> 1)])
+		return -ENODEV;
+
+	p_dev->resource[0]->end = 8;
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+
+	return pcmcia_request_io(p_dev);
+}
+
+static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
+					void *priv_data)
+{
+	static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+	int j;
+
+	if (p_dev->io_lines > 3)
+		return -ENODEV;
+
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+	p_dev->resource[0]->end = 8;
+
+	for (j = 0; j < 5; j++) {
+		p_dev->resource[0]->start = base[j];
+		p_dev->io_lines = base[j] ? 16 : 3;
+		if (!pcmcia_request_io(p_dev))
+			return 0;
+	}
+	return -ENODEV;
+}
+
+static int simple_config(struct pcmcia_device *link)
+{
+	struct serial_info *info = link->priv;
+	int ret, try;
+
+	/*
+	 * First pass: look for a config entry that looks normal.
+	 * Two tries: without IO aliases, then with aliases.
+	 */
+	link->config_flags |= CONF_AUTO_SET_VPP;
+	for (try = 0; try < 4; try++)
+		if (!pcmcia_loop_config(link, simple_config_check, &try))
+			goto found_port;
+
+	/*
+	 * Second pass: try to find an entry that isn't picky about
+	 * its base address, then try to grab any standard serial port
+	 * address, and finally try to get any free port.
+	 */
+	if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
+		goto found_port;
+
+	dev_warn(&link->dev, "no usable port range found, giving up\n");
+	return -1;
+
+found_port:
+	if (info->multi && (info->manfid == MANFID_3COM))
+		link->config_index &= ~(0x08);
+
+	/*
+	 * Apply any configuration quirks.
+	 */
+	if (info->quirk && info->quirk->config)
+		info->quirk->config(link);
+
+	ret = pcmcia_enable_device(link);
+	if (ret != 0)
+		return -1;
+	return setup_serial(link, info, link->resource[0]->start, link->irq);
+}
+
+static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data)
+{
+	int *multi = priv_data;
+
+	if (p_dev->resource[1]->end)
+		return -EINVAL;
+
+	/*
+	 * The quad port cards have bad CIS's, so just look for a
+	 * window larger than 8 ports and assume it will be right.
+	 */
+	if (p_dev->resource[0]->end <= 8)
+		return -EINVAL;
+
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+	p_dev->resource[0]->end = *multi * 8;
+
+	if (pcmcia_request_io(p_dev))
+		return -ENODEV;
+	return 0;
+}
+
+static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
+				       void *priv_data)
+{
+	int *base2 = priv_data;
+
+	if (!p_dev->resource[0]->end || !p_dev->resource[1]->end ||
+		p_dev->resource[0]->start + 8 != p_dev->resource[1]->start)
+		return -ENODEV;
+
+	p_dev->resource[0]->end = p_dev->resource[1]->end = 8;
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+
+	if (pcmcia_request_io(p_dev))
+		return -ENODEV;
+
+	*base2 = p_dev->resource[0]->start + 8;
+	return 0;
+}
+
+static int multi_config(struct pcmcia_device *link)
+{
+	struct serial_info *info = link->priv;
+	int i, base2 = 0;
+
+	/* First, look for a generic full-sized window */
+	if (!pcmcia_loop_config(link, multi_config_check, &info->multi))
+		base2 = link->resource[0]->start + 8;
+	else {
+		/* If that didn't work, look for two windows */
+		info->multi = 2;
+		if (pcmcia_loop_config(link, multi_config_check_notpicky,
+				       &base2)) {
+			dev_warn(&link->dev,
+				 "no usable port range found, giving up\n");
+			return -ENODEV;
+		}
+	}
+
+	if (!link->irq)
+		dev_warn(&link->dev, "no usable IRQ found, continuing...\n");
+
+	/*
+	 * Apply any configuration quirks.
+	 */
+	if (info->quirk && info->quirk->config)
+		info->quirk->config(link);
+
+	i = pcmcia_enable_device(link);
+	if (i != 0)
+		return -ENODEV;
+
+	/* The Oxford Semiconductor OXCF950 cards are in fact single-port:
+	 * 8 registers are for the UART, the others are extra registers.
+	 * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too.
+	 */
+	if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO &&
+				info->prodid == PRODID_POSSIO_GCC)) {
+		int err;
+
+		if (link->config_index == 1 ||
+		    link->config_index == 3) {
+			err = setup_serial(link, info, base2,
+					link->irq);
+			base2 = link->resource[0]->start;
+		} else {
+			err = setup_serial(link, info, link->resource[0]->start,
+					link->irq);
+		}
+		info->c950ctrl = base2;
+
+		/*
+		 * FIXME: We really should wake up the port prior to
+		 * handing it over to the serial layer.
+		 */
+		if (info->quirk && info->quirk->wakeup)
+			info->quirk->wakeup(link);
+
+		return 0;
+	}
+
+	setup_serial(link, info, link->resource[0]->start, link->irq);
+	for (i = 0; i < info->multi - 1; i++)
+		setup_serial(link, info, base2 + (8 * i),
+				link->irq);
+	return 0;
+}
+
+static int serial_check_for_multi(struct pcmcia_device *p_dev,  void *priv_data)
+{
+	struct serial_info *info = p_dev->priv;
+
+	if (!p_dev->resource[0]->end)
+		return -EINVAL;
+
+	if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0))
+		info->multi = p_dev->resource[0]->end >> 3;
+
+	if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8)
+		&& (p_dev->resource[1]->end == 8))
+		info->multi = 2;
+
+	return 0; /* break */
+}
+
+
+static int serial_config(struct pcmcia_device *link)
+{
+	struct serial_info *info = link->priv;
+	int i;
+
+	dev_dbg(&link->dev, "serial_config\n");
+
+	/* Is this a compliant multifunction card? */
+	info->multi = (link->socket->functions > 1);
+
+	/* Is this a multiport card? */
+	info->manfid = link->manf_id;
+	info->prodid = link->card_id;
+
+	for (i = 0; i < ARRAY_SIZE(quirks); i++)
+		if ((quirks[i].manfid == ~0 ||
+		     quirks[i].manfid == info->manfid) &&
+		    (quirks[i].prodid == ~0 ||
+		     quirks[i].prodid == info->prodid)) {
+			info->quirk = &quirks[i];
+			break;
+		}
+
+	/*
+	 * Another check for dual-serial cards: look for either serial or
+	 * multifunction cards that ask for appropriate IO port ranges.
+	 */
+	if ((info->multi == 0) &&
+	    (link->has_func_id) &&
+	    (link->socket->pcmcia_pfc == 0) &&
+	    ((link->func_id == CISTPL_FUNCID_MULTI) ||
+	     (link->func_id == CISTPL_FUNCID_SERIAL))) {
+		if (pcmcia_loop_config(link, serial_check_for_multi, info))
+			goto failed;
+	}
+
+	/*
+	 * Apply any multi-port quirk.
+	 */
+	if (info->quirk && info->quirk->multi != -1)
+		info->multi = info->quirk->multi;
+
+	dev_info(&link->dev,
+		"trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n",
+		link->manf_id, link->card_id,
+		link->socket->pcmcia_pfc, info->multi, info->quirk);
+	if (link->socket->pcmcia_pfc)
+		i = pfc_config(link);
+	else if (info->multi > 1)
+		i = multi_config(link);
+	else
+		i = simple_config(link);
+
+	if (i || info->ndev == 0)
+		goto failed;
+
+	/*
+	 * Apply any post-init quirk.  FIXME: This should really happen
+	 * before we register the port, since it might already be in use.
+	 */
+	if (info->quirk && info->quirk->post)
+		if (info->quirk->post(link))
+			goto failed;
+
+	return 0;
+
+failed:
+	dev_warn(&link->dev, "failed to initialize\n");
+	serial_remove(link);
+	return -ENODEV;
+}
+
+static const struct pcmcia_device_id serial_ids[] = {
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab),
+	PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
+	PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
+	PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
+	PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
+	PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
+	PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
+	PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
+	PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
+	PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
+	PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
+	PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e),
+	PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
+	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
+	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
+	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
+	PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
+	PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
+	PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
+	PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001", 0x18df0ba0, 0x831b1064),
+	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
+	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
+	PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
+	PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
+	PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
+	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0b05),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
+	PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
+	PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
+	PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
+	PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020),
+	PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
+	PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card       ", 0xb569a6e5, 0x5bd4ff2c),
+	PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
+	PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
+	PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77),
+	PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
+	PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301),
+	PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276),
+	PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039),
+	PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006),
+	PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */
+	PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */
+	PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */
+	PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a),
+	PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */
+	PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50),
+	PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51),
+	PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52),
+	PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53),
+	PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180),
+	PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */
+	PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */
+	PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */
+	PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e),
+	PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b),
+	PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025),
+	PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045),
+	PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052),
+	PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */
+	PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */
+	PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae),
+	PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef),
+	PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef),
+	PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef),
+	PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0),
+	PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e),
+	PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a),
+	PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02),
+	PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa),
+	PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76),
+	PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95),
+	PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
+	PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
+	PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b),
+	PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
+	PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
+	PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447),
+	PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
+	PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
+	PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),
+	PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e),
+	PCMCIA_DEVICE_PROD_ID12("OEM      ", "C288MX     ", 0xb572d360, 0xd2385b7a),
+	PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41),
+	PCMCIA_DEVICE_PROD_ID12("Option International", "GSM-Ready 56K/ISDN", 0x9d7cd6f5, 0xb23844aa),
+	PCMCIA_DEVICE_PROD_ID12("PCMCIA   ", "C336MX     ", 0x99bcafe9, 0xaa25bcab),
+	PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
+	PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d),
+	PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38),
+	PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292),
+	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"),
+	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"),
+	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
+	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
+	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
+	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"),
+	PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
+	PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
+	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
+	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"),
+	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"),
+	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"),
+	PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
+	PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */
+	PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"),  /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
+	PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"),  /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
+	PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"),  /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
+	PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"),
+	PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"),
+	PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"),
+	PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"),
+	PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
+	PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100  1.00.", 0x19ca78af, 0xf964f42b),
+	PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100", 0x19ca78af, 0x71d98e83),
+	PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232  1.00.", 0x19ca78af, 0x69fb7490),
+	PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232", 0x19ca78af, 0xb6bc0235),
+	PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.", "SERIAL CARD: CF232", 0x63f2e0bd, 0xb9e175d3),
+	PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.", "SERIAL CARD: CF232-5", 0x63f2e0bd, 0xfce33442),
+	PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF232", 0x3beb8cf2, 0x171e7190),
+	PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF232-5", 0x3beb8cf2, 0x20da4262),
+	PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF428", 0x3beb8cf2, 0xea5dd57d),
+	PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF500", 0x3beb8cf2, 0xd77255fa),
+	PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: IC232", 0x3beb8cf2, 0x6a709903),
+	PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: SL232", 0x3beb8cf2, 0x18430676),
+	PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: XL232", 0x3beb8cf2, 0x6f933767),
+	PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: CF332", 0x3beb8cf2, 0x16dc1ba7),
+	PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL332", 0x3beb8cf2, 0x19816c41),
+	PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL385", 0x3beb8cf2, 0x64112029),
+	PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
+	PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial+Parallel Port: SP230", 0x3beb8cf2, 0xdb9e58bc),
+	PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: CF332", 0x3beb8cf2, 0x16dc1ba7),
+	PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL332", 0x3beb8cf2, 0x19816c41),
+	PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL385", 0x3beb8cf2, 0x64112029),
+	PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
+	PCMCIA_MFC_DEVICE_PROD_ID12(2, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
+	PCMCIA_MFC_DEVICE_PROD_ID12(3, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
+	PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b),
+	/* too generic */
+	/* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */
+	/* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */
+	PCMCIA_DEVICE_FUNC_ID(2),
+	PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, serial_ids);
+
+MODULE_FIRMWARE("cis/PCMLM28.cis");
+MODULE_FIRMWARE("cis/DP83903.cis");
+MODULE_FIRMWARE("cis/3CCFEM556.cis");
+MODULE_FIRMWARE("cis/3CXEM556.cis");
+MODULE_FIRMWARE("cis/SW_8xx_SER.cis");
+MODULE_FIRMWARE("cis/SW_7xx_SER.cis");
+MODULE_FIRMWARE("cis/SW_555_SER.cis");
+MODULE_FIRMWARE("cis/MT5634ZLX.cis");
+MODULE_FIRMWARE("cis/COMpad2.cis");
+MODULE_FIRMWARE("cis/COMpad4.cis");
+MODULE_FIRMWARE("cis/RS-COM-2P.cis");
+
+static struct pcmcia_driver serial_cs_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "serial_cs",
+	.probe		= serial_probe,
+	.remove		= serial_detach,
+	.id_table	= serial_ids,
+	.suspend	= serial_suspend,
+	.resume		= serial_resume,
+};
+module_pcmcia_driver(serial_cs_driver);
+
+MODULE_LICENSE("GPL");