Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1751 insertions, 0 deletions

diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
new file mode 100644
index 000000000..486d35da0
--- /dev/null
+++ b/drivers/video/backlight/qcom-wled.c
@@ -0,0 +1,1751 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) 2015, Sony Mobile Communications, AB.
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/ktime.h>
+#include <linux/kernel.h>
+#include <linux/backlight.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+
+/* From DT binding */
+#define WLED_MAX_STRINGS				4
+#define MOD_A						0
+#define MOD_B						1
+
+#define WLED_DEFAULT_BRIGHTNESS				2048
+#define WLED_SOFT_START_DLY_US				10000
+#define WLED3_SINK_REG_BRIGHT_MAX			0xFFF
+#define WLED5_SINK_REG_BRIGHT_MAX_12B			0xFFF
+#define WLED5_SINK_REG_BRIGHT_MAX_15B			0x7FFF
+
+/* WLED3/WLED4 control registers */
+#define WLED3_CTRL_REG_FAULT_STATUS			0x08
+#define  WLED3_CTRL_REG_ILIM_FAULT_BIT			BIT(0)
+#define  WLED3_CTRL_REG_OVP_FAULT_BIT			BIT(1)
+#define  WLED4_CTRL_REG_SC_FAULT_BIT			BIT(2)
+#define  WLED5_CTRL_REG_OVP_PRE_ALARM_BIT		BIT(4)
+
+#define WLED3_CTRL_REG_INT_RT_STS			0x10
+#define  WLED3_CTRL_REG_OVP_FAULT_STATUS		BIT(1)
+
+#define WLED3_CTRL_REG_MOD_EN				0x46
+#define  WLED3_CTRL_REG_MOD_EN_MASK			BIT(7)
+#define  WLED3_CTRL_REG_MOD_EN_SHIFT			7
+
+#define WLED3_CTRL_REG_FEEDBACK_CONTROL			0x48
+
+#define WLED3_CTRL_REG_FREQ				0x4c
+#define  WLED3_CTRL_REG_FREQ_MASK			GENMASK(3, 0)
+
+#define WLED3_CTRL_REG_OVP				0x4d
+#define  WLED3_CTRL_REG_OVP_MASK			GENMASK(1, 0)
+#define  WLED5_CTRL_REG_OVP_MASK			GENMASK(3, 0)
+
+#define WLED3_CTRL_REG_ILIMIT				0x4e
+#define  WLED3_CTRL_REG_ILIMIT_MASK			GENMASK(2, 0)
+
+/* WLED3/WLED4 sink registers */
+#define WLED3_SINK_REG_SYNC				0x47
+#define  WLED3_SINK_REG_SYNC_CLEAR			0x00
+
+#define WLED3_SINK_REG_CURR_SINK			0x4f
+#define  WLED3_SINK_REG_CURR_SINK_MASK			GENMASK(7, 5)
+#define  WLED3_SINK_REG_CURR_SINK_SHFT			5
+
+/* WLED3 specific per-'string' registers below */
+#define WLED3_SINK_REG_BRIGHT(n)			(0x40 + n)
+
+#define WLED3_SINK_REG_STR_MOD_EN(n)			(0x60 + (n * 0x10))
+#define  WLED3_SINK_REG_STR_MOD_MASK			BIT(7)
+
+#define WLED3_SINK_REG_STR_FULL_SCALE_CURR(n)		(0x62 + (n * 0x10))
+#define  WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK	GENMASK(4, 0)
+
+#define WLED3_SINK_REG_STR_MOD_SRC(n)			(0x63 + (n * 0x10))
+#define  WLED3_SINK_REG_STR_MOD_SRC_MASK		BIT(0)
+#define  WLED3_SINK_REG_STR_MOD_SRC_INT			0x00
+#define  WLED3_SINK_REG_STR_MOD_SRC_EXT			0x01
+
+#define WLED3_SINK_REG_STR_CABC(n)			(0x66 + (n * 0x10))
+#define  WLED3_SINK_REG_STR_CABC_MASK			BIT(7)
+
+/* WLED4 specific control registers */
+#define WLED4_CTRL_REG_SHORT_PROTECT			0x5e
+#define  WLED4_CTRL_REG_SHORT_EN_MASK			BIT(7)
+
+#define WLED4_CTRL_REG_SEC_ACCESS			0xd0
+#define  WLED4_CTRL_REG_SEC_UNLOCK			0xa5
+
+#define WLED4_CTRL_REG_TEST1				0xe2
+#define  WLED4_CTRL_REG_TEST1_EXT_FET_DTEST2		0x09
+
+/* WLED4 specific sink registers */
+#define WLED4_SINK_REG_CURR_SINK			0x46
+#define  WLED4_SINK_REG_CURR_SINK_MASK			GENMASK(7, 4)
+#define  WLED4_SINK_REG_CURR_SINK_SHFT			4
+
+/* WLED4 specific per-'string' registers below */
+#define WLED4_SINK_REG_STR_MOD_EN(n)			(0x50 + (n * 0x10))
+#define  WLED4_SINK_REG_STR_MOD_MASK			BIT(7)
+
+#define WLED4_SINK_REG_STR_FULL_SCALE_CURR(n)		(0x52 + (n * 0x10))
+#define  WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK	GENMASK(3, 0)
+
+#define WLED4_SINK_REG_STR_MOD_SRC(n)			(0x53 + (n * 0x10))
+#define  WLED4_SINK_REG_STR_MOD_SRC_MASK		BIT(0)
+#define  WLED4_SINK_REG_STR_MOD_SRC_INT			0x00
+#define  WLED4_SINK_REG_STR_MOD_SRC_EXT			0x01
+
+#define WLED4_SINK_REG_STR_CABC(n)			(0x56 + (n * 0x10))
+#define  WLED4_SINK_REG_STR_CABC_MASK			BIT(7)
+
+#define WLED4_SINK_REG_BRIGHT(n)			(0x57 + (n * 0x10))
+
+/* WLED5 specific control registers */
+#define WLED5_CTRL_REG_OVP_INT_CTL			0x5f
+#define  WLED5_CTRL_REG_OVP_INT_TIMER_MASK		GENMASK(2, 0)
+
+/* WLED5 specific sink registers */
+#define WLED5_SINK_REG_MOD_A_EN				0x50
+#define WLED5_SINK_REG_MOD_B_EN				0x60
+#define  WLED5_SINK_REG_MOD_EN_MASK			BIT(7)
+
+#define WLED5_SINK_REG_MOD_A_SRC_SEL			0x51
+#define WLED5_SINK_REG_MOD_B_SRC_SEL			0x61
+#define  WLED5_SINK_REG_MOD_SRC_SEL_HIGH		0
+#define  WLED5_SINK_REG_MOD_SRC_SEL_EXT			0x03
+#define  WLED5_SINK_REG_MOD_SRC_SEL_MASK		GENMASK(1, 0)
+
+#define WLED5_SINK_REG_MOD_A_BRIGHTNESS_WIDTH_SEL	0x52
+#define WLED5_SINK_REG_MOD_B_BRIGHTNESS_WIDTH_SEL	0x62
+#define  WLED5_SINK_REG_BRIGHTNESS_WIDTH_12B		0
+#define  WLED5_SINK_REG_BRIGHTNESS_WIDTH_15B		1
+
+#define WLED5_SINK_REG_MOD_A_BRIGHTNESS_LSB		0x53
+#define WLED5_SINK_REG_MOD_A_BRIGHTNESS_MSB		0x54
+#define WLED5_SINK_REG_MOD_B_BRIGHTNESS_LSB		0x63
+#define WLED5_SINK_REG_MOD_B_BRIGHTNESS_MSB		0x64
+
+#define WLED5_SINK_REG_MOD_SYNC_BIT			0x65
+#define  WLED5_SINK_REG_SYNC_MOD_A_BIT			BIT(0)
+#define  WLED5_SINK_REG_SYNC_MOD_B_BIT			BIT(1)
+#define  WLED5_SINK_REG_SYNC_MASK			GENMASK(1, 0)
+
+/* WLED5 specific per-'string' registers below */
+#define WLED5_SINK_REG_STR_FULL_SCALE_CURR(n)		(0x72 + (n * 0x10))
+
+#define WLED5_SINK_REG_STR_SRC_SEL(n)			(0x73 + (n * 0x10))
+#define  WLED5_SINK_REG_SRC_SEL_MOD_A			0
+#define  WLED5_SINK_REG_SRC_SEL_MOD_B			1
+#define  WLED5_SINK_REG_SRC_SEL_MASK			GENMASK(1, 0)
+
+struct wled_var_cfg {
+	const u32 *values;
+	u32 (*fn)(u32);
+	int size;
+};
+
+struct wled_u32_opts {
+	const char *name;
+	u32 *val_ptr;
+	const struct wled_var_cfg *cfg;
+};
+
+struct wled_bool_opts {
+	const char *name;
+	bool *val_ptr;
+};
+
+struct wled_config {
+	u32 boost_i_limit;
+	u32 ovp;
+	u32 switch_freq;
+	u32 num_strings;
+	u32 string_i_limit;
+	u32 enabled_strings[WLED_MAX_STRINGS];
+	u32 mod_sel;
+	u32 cabc_sel;
+	bool cs_out_en;
+	bool ext_gen;
+	bool cabc;
+	bool external_pfet;
+	bool auto_detection_enabled;
+};
+
+struct wled {
+	const char *name;
+	struct device *dev;
+	struct regmap *regmap;
+	struct mutex lock;	/* Lock to avoid race from thread irq handler */
+	ktime_t last_short_event;
+	ktime_t start_ovp_fault_time;
+	u16 ctrl_addr;
+	u16 sink_addr;
+	u16 max_string_count;
+	u16 auto_detection_ovp_count;
+	u32 brightness;
+	u32 max_brightness;
+	u32 short_count;
+	u32 auto_detect_count;
+	u32 version;
+	bool disabled_by_short;
+	bool has_short_detect;
+	bool cabc_disabled;
+	int short_irq;
+	int ovp_irq;
+
+	struct wled_config cfg;
+	struct delayed_work ovp_work;
+
+	/* Configures the brightness. Applicable for wled3, wled4 and wled5 */
+	int (*wled_set_brightness)(struct wled *wled, u16 brightness);
+
+	/* Configures the cabc register. Applicable for wled4 and wled5 */
+	int (*wled_cabc_config)(struct wled *wled, bool enable);
+
+	/*
+	 * Toggles the sync bit for the brightness update to take place.
+	 * Applicable for WLED3, WLED4 and WLED5.
+	 */
+	int (*wled_sync_toggle)(struct wled *wled);
+
+	/*
+	 * Time to wait before checking the OVP status after wled module enable.
+	 * Applicable for WLED4 and WLED5.
+	 */
+	int (*wled_ovp_delay)(struct wled *wled);
+
+	/*
+	 * Determines if the auto string detection is required.
+	 * Applicable for WLED4 and WLED5
+	 */
+	bool (*wled_auto_detection_required)(struct wled *wled);
+};
+
+static int wled3_set_brightness(struct wled *wled, u16 brightness)
+{
+	int rc, i;
+	__le16 v;
+
+	v = cpu_to_le16(brightness & WLED3_SINK_REG_BRIGHT_MAX);
+
+	for (i = 0;  i < wled->cfg.num_strings; ++i) {
+		rc = regmap_bulk_write(wled->regmap, wled->ctrl_addr +
+				       WLED3_SINK_REG_BRIGHT(wled->cfg.enabled_strings[i]),
+				       &v, sizeof(v));
+		if (rc < 0)
+			return rc;
+	}
+
+	return 0;
+}
+
+static int wled4_set_brightness(struct wled *wled, u16 brightness)
+{
+	int rc, i;
+	u16 low_limit = wled->max_brightness * 4 / 1000;
+	__le16 v;
+
+	/* WLED4's lower limit of operation is 0.4% */
+	if (brightness > 0 && brightness < low_limit)
+		brightness = low_limit;
+
+	v = cpu_to_le16(brightness & WLED3_SINK_REG_BRIGHT_MAX);
+
+	for (i = 0;  i < wled->cfg.num_strings; ++i) {
+		rc = regmap_bulk_write(wled->regmap, wled->sink_addr +
+				       WLED4_SINK_REG_BRIGHT(wled->cfg.enabled_strings[i]),
+				       &v, sizeof(v));
+		if (rc < 0)
+			return rc;
+	}
+
+	return 0;
+}
+
+static int wled5_set_brightness(struct wled *wled, u16 brightness)
+{
+	int rc, offset;
+	u16 low_limit = wled->max_brightness * 1 / 1000;
+	__le16 v;
+
+	/* WLED5's lower limit is 0.1% */
+	if (brightness < low_limit)
+		brightness = low_limit;
+
+	v = cpu_to_le16(brightness & WLED5_SINK_REG_BRIGHT_MAX_15B);
+
+	offset = (wled->cfg.mod_sel == MOD_A) ?
+		  WLED5_SINK_REG_MOD_A_BRIGHTNESS_LSB :
+		  WLED5_SINK_REG_MOD_B_BRIGHTNESS_LSB;
+
+	rc = regmap_bulk_write(wled->regmap, wled->sink_addr + offset,
+			       &v, sizeof(v));
+	return rc;
+}
+
+static void wled_ovp_work(struct work_struct *work)
+{
+	struct wled *wled = container_of(work,
+					 struct wled, ovp_work.work);
+	enable_irq(wled->ovp_irq);
+}
+
+static int wled_module_enable(struct wled *wled, int val)
+{
+	int rc;
+
+	if (wled->disabled_by_short)
+		return -ENXIO;
+
+	rc = regmap_update_bits(wled->regmap, wled->ctrl_addr +
+				WLED3_CTRL_REG_MOD_EN,
+				WLED3_CTRL_REG_MOD_EN_MASK,
+				val << WLED3_CTRL_REG_MOD_EN_SHIFT);
+	if (rc < 0)
+		return rc;
+
+	if (wled->ovp_irq > 0) {
+		if (val) {
+			/*
+			 * The hardware generates a storm of spurious OVP
+			 * interrupts during soft start operations. So defer
+			 * enabling the IRQ for 10ms to ensure that the
+			 * soft start is complete.
+			 */
+			schedule_delayed_work(&wled->ovp_work, HZ / 100);
+		} else {
+			if (!cancel_delayed_work_sync(&wled->ovp_work))
+				disable_irq(wled->ovp_irq);
+		}
+	}
+
+	return 0;
+}
+
+static int wled3_sync_toggle(struct wled *wled)
+{
+	int rc;
+	unsigned int mask = GENMASK(wled->max_string_count - 1, 0);
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->sink_addr + WLED3_SINK_REG_SYNC,
+				mask, mask);
+	if (rc < 0)
+		return rc;
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->sink_addr + WLED3_SINK_REG_SYNC,
+				mask, WLED3_SINK_REG_SYNC_CLEAR);
+
+	return rc;
+}
+
+static int wled5_mod_sync_toggle(struct wled *wled)
+{
+	int rc;
+	u8 val;
+
+	val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT :
+					     WLED5_SINK_REG_SYNC_MOD_B_BIT;
+	rc = regmap_update_bits(wled->regmap,
+				wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT,
+				WLED5_SINK_REG_SYNC_MASK, val);
+	if (rc < 0)
+		return rc;
+
+	return regmap_update_bits(wled->regmap,
+				  wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT,
+				  WLED5_SINK_REG_SYNC_MASK, 0);
+}
+
+static int wled_ovp_fault_status(struct wled *wled, bool *fault_set)
+{
+	int rc;
+	u32 int_rt_sts, fault_sts;
+
+	*fault_set = false;
+	rc = regmap_read(wled->regmap,
+			wled->ctrl_addr + WLED3_CTRL_REG_INT_RT_STS,
+			&int_rt_sts);
+	if (rc < 0) {
+		dev_err(wled->dev, "Failed to read INT_RT_STS rc=%d\n", rc);
+		return rc;
+	}
+
+	rc = regmap_read(wled->regmap,
+			wled->ctrl_addr + WLED3_CTRL_REG_FAULT_STATUS,
+			&fault_sts);
+	if (rc < 0) {
+		dev_err(wled->dev, "Failed to read FAULT_STATUS rc=%d\n", rc);
+		return rc;
+	}
+
+	if (int_rt_sts & WLED3_CTRL_REG_OVP_FAULT_STATUS)
+		*fault_set = true;
+
+	if (wled->version == 4 && (fault_sts & WLED3_CTRL_REG_OVP_FAULT_BIT))
+		*fault_set = true;
+
+	if (wled->version == 5 && (fault_sts & (WLED3_CTRL_REG_OVP_FAULT_BIT |
+				   WLED5_CTRL_REG_OVP_PRE_ALARM_BIT)))
+		*fault_set = true;
+
+	if (*fault_set)
+		dev_dbg(wled->dev, "WLED OVP fault detected, int_rt_sts=0x%x fault_sts=0x%x\n",
+			int_rt_sts, fault_sts);
+
+	return rc;
+}
+
+static int wled4_ovp_delay(struct wled *wled)
+{
+	return WLED_SOFT_START_DLY_US;
+}
+
+static int wled5_ovp_delay(struct wled *wled)
+{
+	int rc, delay_us;
+	u32 val;
+	u8 ovp_timer_ms[8] = {1, 2, 4, 8, 12, 16, 20, 24};
+
+	/* For WLED5, get the delay based on OVP timer */
+	rc = regmap_read(wled->regmap, wled->ctrl_addr +
+			 WLED5_CTRL_REG_OVP_INT_CTL, &val);
+	if (rc < 0)
+		delay_us =
+		ovp_timer_ms[val & WLED5_CTRL_REG_OVP_INT_TIMER_MASK] * 1000;
+	else
+		delay_us = 2 * WLED_SOFT_START_DLY_US;
+
+	dev_dbg(wled->dev, "delay_time_us: %d\n", delay_us);
+
+	return delay_us;
+}
+
+static int wled_update_status(struct backlight_device *bl)
+{
+	struct wled *wled = bl_get_data(bl);
+	u16 brightness = backlight_get_brightness(bl);
+	int rc = 0;
+
+	mutex_lock(&wled->lock);
+	if (brightness) {
+		rc = wled->wled_set_brightness(wled, brightness);
+		if (rc < 0) {
+			dev_err(wled->dev, "wled failed to set brightness rc:%d\n",
+				rc);
+			goto unlock_mutex;
+		}
+
+		if (wled->version < 5) {
+			rc = wled->wled_sync_toggle(wled);
+			if (rc < 0) {
+				dev_err(wled->dev, "wled sync failed rc:%d\n", rc);
+				goto unlock_mutex;
+			}
+		} else {
+			/*
+			 * For WLED5 toggling the MOD_SYNC_BIT updates the
+			 * brightness
+			 */
+			rc = wled5_mod_sync_toggle(wled);
+			if (rc < 0) {
+				dev_err(wled->dev, "wled mod sync failed rc:%d\n",
+					rc);
+				goto unlock_mutex;
+			}
+		}
+	}
+
+	if (!!brightness != !!wled->brightness) {
+		rc = wled_module_enable(wled, !!brightness);
+		if (rc < 0) {
+			dev_err(wled->dev, "wled enable failed rc:%d\n", rc);
+			goto unlock_mutex;
+		}
+	}
+
+	wled->brightness = brightness;
+
+unlock_mutex:
+	mutex_unlock(&wled->lock);
+
+	return rc;
+}
+
+static int wled4_cabc_config(struct wled *wled, bool enable)
+{
+	int i, j, rc;
+	u8 val;
+
+	for (i = 0; i < wled->cfg.num_strings; i++) {
+		j = wled->cfg.enabled_strings[i];
+
+		val = enable ? WLED4_SINK_REG_STR_CABC_MASK : 0;
+		rc = regmap_update_bits(wled->regmap, wled->sink_addr +
+					WLED4_SINK_REG_STR_CABC(j),
+					WLED4_SINK_REG_STR_CABC_MASK, val);
+		if (rc < 0)
+			return rc;
+	}
+
+	return 0;
+}
+
+static int wled5_cabc_config(struct wled *wled, bool enable)
+{
+	int rc, offset;
+	u8 reg;
+
+	if (wled->cabc_disabled)
+		return 0;
+
+	reg = enable ? wled->cfg.cabc_sel : 0;
+	offset = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_MOD_A_SRC_SEL :
+						WLED5_SINK_REG_MOD_B_SRC_SEL;
+
+	rc = regmap_update_bits(wled->regmap, wled->sink_addr + offset,
+				WLED5_SINK_REG_MOD_SRC_SEL_MASK, reg);
+	if (rc < 0) {
+		pr_err("Error in configuring CABC rc=%d\n", rc);
+		return rc;
+	}
+
+	if (!wled->cfg.cabc_sel)
+		wled->cabc_disabled = true;
+
+	return 0;
+}
+
+#define WLED_SHORT_DLY_MS			20
+#define WLED_SHORT_CNT_MAX			5
+#define WLED_SHORT_RESET_CNT_DLY_US		USEC_PER_SEC
+
+static irqreturn_t wled_short_irq_handler(int irq, void *_wled)
+{
+	struct wled *wled = _wled;
+	int rc;
+	s64 elapsed_time;
+
+	wled->short_count++;
+	mutex_lock(&wled->lock);
+	rc = wled_module_enable(wled, false);
+	if (rc < 0) {
+		dev_err(wled->dev, "wled disable failed rc:%d\n", rc);
+		goto unlock_mutex;
+	}
+
+	elapsed_time = ktime_us_delta(ktime_get(),
+				      wled->last_short_event);
+	if (elapsed_time > WLED_SHORT_RESET_CNT_DLY_US)
+		wled->short_count = 1;
+
+	if (wled->short_count > WLED_SHORT_CNT_MAX) {
+		dev_err(wled->dev, "Short triggered %d times, disabling WLED forever!\n",
+			wled->short_count);
+		wled->disabled_by_short = true;
+		goto unlock_mutex;
+	}
+
+	wled->last_short_event = ktime_get();
+
+	msleep(WLED_SHORT_DLY_MS);
+	rc = wled_module_enable(wled, true);
+	if (rc < 0)
+		dev_err(wled->dev, "wled enable failed rc:%d\n", rc);
+
+unlock_mutex:
+	mutex_unlock(&wled->lock);
+
+	return IRQ_HANDLED;
+}
+
+#define AUTO_DETECT_BRIGHTNESS		200
+
+static void wled_auto_string_detection(struct wled *wled)
+{
+	int rc = 0, i, j, delay_time_us;
+	u32 sink_config = 0;
+	u8 sink_test = 0, sink_valid = 0, val;
+	bool fault_set;
+
+	/* Read configured sink configuration */
+	rc = regmap_read(wled->regmap, wled->sink_addr +
+			 WLED4_SINK_REG_CURR_SINK, &sink_config);
+	if (rc < 0) {
+		dev_err(wled->dev, "Failed to read SINK configuration rc=%d\n",
+			rc);
+		goto failed_detect;
+	}
+
+	/* Disable the module before starting detection */
+	rc = regmap_update_bits(wled->regmap,
+				wled->ctrl_addr + WLED3_CTRL_REG_MOD_EN,
+				WLED3_CTRL_REG_MOD_EN_MASK, 0);
+	if (rc < 0) {
+		dev_err(wled->dev, "Failed to disable WLED module rc=%d\n", rc);
+		goto failed_detect;
+	}
+
+	/* Set low brightness across all sinks */
+	rc = wled4_set_brightness(wled, AUTO_DETECT_BRIGHTNESS);
+	if (rc < 0) {
+		dev_err(wled->dev, "Failed to set brightness for auto detection rc=%d\n",
+			rc);
+		goto failed_detect;
+	}
+
+	if (wled->cfg.cabc) {
+		rc = wled->wled_cabc_config(wled, false);
+		if (rc < 0)
+			goto failed_detect;
+	}
+
+	/* Disable all sinks */
+	rc = regmap_write(wled->regmap,
+			  wled->sink_addr + WLED4_SINK_REG_CURR_SINK, 0);
+	if (rc < 0) {
+		dev_err(wled->dev, "Failed to disable all sinks rc=%d\n", rc);
+		goto failed_detect;
+	}
+
+	/* Iterate through the strings one by one */
+	for (i = 0; i < wled->cfg.num_strings; i++) {
+		j = wled->cfg.enabled_strings[i];
+		sink_test = BIT((WLED4_SINK_REG_CURR_SINK_SHFT + j));
+
+		/* Enable feedback control */
+		rc = regmap_write(wled->regmap, wled->ctrl_addr +
+				  WLED3_CTRL_REG_FEEDBACK_CONTROL, j + 1);
+		if (rc < 0) {
+			dev_err(wled->dev, "Failed to enable feedback for SINK %d rc = %d\n",
+				j + 1, rc);
+			goto failed_detect;
+		}
+
+		/* Enable the sink */
+		rc = regmap_write(wled->regmap, wled->sink_addr +
+				  WLED4_SINK_REG_CURR_SINK, sink_test);
+		if (rc < 0) {
+			dev_err(wled->dev, "Failed to configure SINK %d rc=%d\n",
+				j + 1, rc);
+			goto failed_detect;
+		}
+
+		/* Enable the module */
+		rc = regmap_update_bits(wled->regmap, wled->ctrl_addr +
+					WLED3_CTRL_REG_MOD_EN,
+					WLED3_CTRL_REG_MOD_EN_MASK,
+					WLED3_CTRL_REG_MOD_EN_MASK);
+		if (rc < 0) {
+			dev_err(wled->dev, "Failed to enable WLED module rc=%d\n",
+				rc);
+			goto failed_detect;
+		}
+
+		delay_time_us = wled->wled_ovp_delay(wled);
+		usleep_range(delay_time_us, delay_time_us + 1000);
+
+		rc = wled_ovp_fault_status(wled, &fault_set);
+		if (rc < 0) {
+			dev_err(wled->dev, "Error in getting OVP fault_sts, rc=%d\n",
+				rc);
+			goto failed_detect;
+		}
+
+		if (fault_set)
+			dev_dbg(wled->dev, "WLED OVP fault detected with SINK %d\n",
+				j + 1);
+		else
+			sink_valid |= sink_test;
+
+		/* Disable the module */
+		rc = regmap_update_bits(wled->regmap,
+					wled->ctrl_addr + WLED3_CTRL_REG_MOD_EN,
+					WLED3_CTRL_REG_MOD_EN_MASK, 0);
+		if (rc < 0) {
+			dev_err(wled->dev, "Failed to disable WLED module rc=%d\n",
+				rc);
+			goto failed_detect;
+		}
+	}
+
+	if (!sink_valid) {
+		dev_err(wled->dev, "No valid WLED sinks found\n");
+		wled->disabled_by_short = true;
+		goto failed_detect;
+	}
+
+	if (sink_valid != sink_config) {
+		dev_warn(wled->dev, "%x is not a valid sink configuration - using %x instead\n",
+			 sink_config, sink_valid);
+		sink_config = sink_valid;
+	}
+
+	/* Write the new sink configuration */
+	rc = regmap_write(wled->regmap,
+			  wled->sink_addr + WLED4_SINK_REG_CURR_SINK,
+			  sink_config);
+	if (rc < 0) {
+		dev_err(wled->dev, "Failed to reconfigure the default sink rc=%d\n",
+			rc);
+		goto failed_detect;
+	}
+
+	/* Enable valid sinks */
+	if (wled->version == 4) {
+		for (i = 0; i < wled->cfg.num_strings; i++) {
+			j = wled->cfg.enabled_strings[i];
+			if (sink_config &
+			    BIT(WLED4_SINK_REG_CURR_SINK_SHFT + j))
+				val = WLED4_SINK_REG_STR_MOD_MASK;
+			else
+				/* Disable modulator_en for unused sink */
+				val = 0;
+
+			rc = regmap_write(wled->regmap, wled->sink_addr +
+					  WLED4_SINK_REG_STR_MOD_EN(j), val);
+			if (rc < 0) {
+				dev_err(wled->dev, "Failed to configure MODULATOR_EN rc=%d\n",
+					rc);
+				goto failed_detect;
+			}
+		}
+	}
+
+	/* Enable CABC */
+	rc = wled->wled_cabc_config(wled, true);
+	if (rc < 0)
+		goto failed_detect;
+
+	/* Restore the feedback setting */
+	rc = regmap_write(wled->regmap,
+			  wled->ctrl_addr + WLED3_CTRL_REG_FEEDBACK_CONTROL, 0);
+	if (rc < 0) {
+		dev_err(wled->dev, "Failed to restore feedback setting rc=%d\n",
+			rc);
+		goto failed_detect;
+	}
+
+	/* Restore brightness */
+	rc = wled4_set_brightness(wled, wled->brightness);
+	if (rc < 0) {
+		dev_err(wled->dev, "Failed to set brightness after auto detection rc=%d\n",
+			rc);
+		goto failed_detect;
+	}
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->ctrl_addr + WLED3_CTRL_REG_MOD_EN,
+				WLED3_CTRL_REG_MOD_EN_MASK,
+				WLED3_CTRL_REG_MOD_EN_MASK);
+	if (rc < 0) {
+		dev_err(wled->dev, "Failed to enable WLED module rc=%d\n", rc);
+		goto failed_detect;
+	}
+
+failed_detect:
+	return;
+}
+
+#define WLED_AUTO_DETECT_OVP_COUNT		5
+#define WLED_AUTO_DETECT_CNT_DLY_US		USEC_PER_SEC
+
+static bool wled4_auto_detection_required(struct wled *wled)
+{
+	s64 elapsed_time_us;
+
+	if (!wled->cfg.auto_detection_enabled)
+		return false;
+
+	/*
+	 * Check if the OVP fault was an occasional one
+	 * or if it's firing continuously, the latter qualifies
+	 * for an auto-detection check.
+	 */
+	if (!wled->auto_detection_ovp_count) {
+		wled->start_ovp_fault_time = ktime_get();
+		wled->auto_detection_ovp_count++;
+	} else {
+		elapsed_time_us = ktime_us_delta(ktime_get(),
+						 wled->start_ovp_fault_time);
+		if (elapsed_time_us > WLED_AUTO_DETECT_CNT_DLY_US)
+			wled->auto_detection_ovp_count = 0;
+		else
+			wled->auto_detection_ovp_count++;
+
+		if (wled->auto_detection_ovp_count >=
+				WLED_AUTO_DETECT_OVP_COUNT) {
+			wled->auto_detection_ovp_count = 0;
+			return true;
+		}
+	}
+
+	return false;
+}
+
+static bool wled5_auto_detection_required(struct wled *wled)
+{
+	if (!wled->cfg.auto_detection_enabled)
+		return false;
+
+	/*
+	 * Unlike WLED4, WLED5 has OVP fault density interrupt configuration
+	 * i.e. to count the number of OVP alarms for a certain duration before
+	 * triggering OVP fault interrupt. By default, number of OVP fault
+	 * events counted before an interrupt is fired is 32 and the time
+	 * interval is 12 ms. If we see one OVP fault interrupt, then that
+	 * should qualify for a real OVP fault condition to run auto detection
+	 * algorithm.
+	 */
+	return true;
+}
+
+static int wled_auto_detection_at_init(struct wled *wled)
+{
+	int rc;
+	bool fault_set;
+
+	if (!wled->cfg.auto_detection_enabled)
+		return 0;
+
+	rc = wled_ovp_fault_status(wled, &fault_set);
+	if (rc < 0) {
+		dev_err(wled->dev, "Error in getting OVP fault_sts, rc=%d\n",
+			rc);
+		return rc;
+	}
+
+	if (fault_set) {
+		mutex_lock(&wled->lock);
+		wled_auto_string_detection(wled);
+		mutex_unlock(&wled->lock);
+	}
+
+	return rc;
+}
+
+static irqreturn_t wled_ovp_irq_handler(int irq, void *_wled)
+{
+	struct wled *wled = _wled;
+	int rc;
+	u32 int_sts, fault_sts;
+
+	rc = regmap_read(wled->regmap,
+			 wled->ctrl_addr + WLED3_CTRL_REG_INT_RT_STS, &int_sts);
+	if (rc < 0) {
+		dev_err(wled->dev, "Error in reading WLED3_INT_RT_STS rc=%d\n",
+			rc);
+		return IRQ_HANDLED;
+	}
+
+	rc = regmap_read(wled->regmap, wled->ctrl_addr +
+			 WLED3_CTRL_REG_FAULT_STATUS, &fault_sts);
+	if (rc < 0) {
+		dev_err(wled->dev, "Error in reading WLED_FAULT_STATUS rc=%d\n",
+			rc);
+		return IRQ_HANDLED;
+	}
+
+	if (fault_sts & (WLED3_CTRL_REG_OVP_FAULT_BIT |
+		WLED3_CTRL_REG_ILIM_FAULT_BIT))
+		dev_dbg(wled->dev, "WLED OVP fault detected, int_sts=%x fault_sts= %x\n",
+			int_sts, fault_sts);
+
+	if (fault_sts & WLED3_CTRL_REG_OVP_FAULT_BIT) {
+		if (wled->wled_auto_detection_required(wled)) {
+			mutex_lock(&wled->lock);
+			wled_auto_string_detection(wled);
+			mutex_unlock(&wled->lock);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int wled3_setup(struct wled *wled)
+{
+	u16 addr;
+	u8 sink_en = 0;
+	int rc, i, j;
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->ctrl_addr + WLED3_CTRL_REG_OVP,
+				WLED3_CTRL_REG_OVP_MASK, wled->cfg.ovp);
+	if (rc)
+		return rc;
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->ctrl_addr + WLED3_CTRL_REG_ILIMIT,
+				WLED3_CTRL_REG_ILIMIT_MASK,
+				wled->cfg.boost_i_limit);
+	if (rc)
+		return rc;
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->ctrl_addr + WLED3_CTRL_REG_FREQ,
+				WLED3_CTRL_REG_FREQ_MASK,
+				wled->cfg.switch_freq);
+	if (rc)
+		return rc;
+
+	for (i = 0; i < wled->cfg.num_strings; ++i) {
+		j = wled->cfg.enabled_strings[i];
+		addr = wled->ctrl_addr + WLED3_SINK_REG_STR_MOD_EN(j);
+		rc = regmap_update_bits(wled->regmap, addr,
+					WLED3_SINK_REG_STR_MOD_MASK,
+					WLED3_SINK_REG_STR_MOD_MASK);
+		if (rc)
+			return rc;
+
+		if (wled->cfg.ext_gen) {
+			addr = wled->ctrl_addr + WLED3_SINK_REG_STR_MOD_SRC(j);
+			rc = regmap_update_bits(wled->regmap, addr,
+						WLED3_SINK_REG_STR_MOD_SRC_MASK,
+						WLED3_SINK_REG_STR_MOD_SRC_EXT);
+			if (rc)
+				return rc;
+		}
+
+		addr = wled->ctrl_addr + WLED3_SINK_REG_STR_FULL_SCALE_CURR(j);
+		rc = regmap_update_bits(wled->regmap, addr,
+					WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK,
+					wled->cfg.string_i_limit);
+		if (rc)
+			return rc;
+
+		addr = wled->ctrl_addr + WLED3_SINK_REG_STR_CABC(j);
+		rc = regmap_update_bits(wled->regmap, addr,
+					WLED3_SINK_REG_STR_CABC_MASK,
+					wled->cfg.cabc ?
+					WLED3_SINK_REG_STR_CABC_MASK : 0);
+		if (rc)
+			return rc;
+
+		sink_en |= BIT(j + WLED3_SINK_REG_CURR_SINK_SHFT);
+	}
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->ctrl_addr + WLED3_SINK_REG_CURR_SINK,
+				WLED3_SINK_REG_CURR_SINK_MASK, sink_en);
+	if (rc)
+		return rc;
+
+	return 0;
+}
+
+static const struct wled_config wled3_config_defaults = {
+	.boost_i_limit = 3,
+	.string_i_limit = 20,
+	.ovp = 2,
+	.num_strings = 3,
+	.switch_freq = 5,
+	.cs_out_en = false,
+	.ext_gen = false,
+	.cabc = false,
+	.enabled_strings = {0, 1, 2, 3},
+};
+
+static int wled4_setup(struct wled *wled)
+{
+	int rc, temp, i, j;
+	u16 addr;
+	u8 sink_en = 0;
+	u32 sink_cfg;
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->ctrl_addr + WLED3_CTRL_REG_OVP,
+				WLED3_CTRL_REG_OVP_MASK, wled->cfg.ovp);
+	if (rc < 0)
+		return rc;
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->ctrl_addr + WLED3_CTRL_REG_ILIMIT,
+				WLED3_CTRL_REG_ILIMIT_MASK,
+				wled->cfg.boost_i_limit);
+	if (rc < 0)
+		return rc;
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->ctrl_addr + WLED3_CTRL_REG_FREQ,
+				WLED3_CTRL_REG_FREQ_MASK,
+				wled->cfg.switch_freq);
+	if (rc < 0)
+		return rc;
+
+	if (wled->cfg.external_pfet) {
+		/* Unlock the secure register access */
+		rc = regmap_write(wled->regmap, wled->ctrl_addr +
+				  WLED4_CTRL_REG_SEC_ACCESS,
+				  WLED4_CTRL_REG_SEC_UNLOCK);
+		if (rc < 0)
+			return rc;
+
+		rc = regmap_write(wled->regmap,
+				  wled->ctrl_addr + WLED4_CTRL_REG_TEST1,
+				  WLED4_CTRL_REG_TEST1_EXT_FET_DTEST2);
+		if (rc < 0)
+			return rc;
+	}
+
+	rc = regmap_read(wled->regmap, wled->sink_addr +
+			 WLED4_SINK_REG_CURR_SINK, &sink_cfg);
+	if (rc < 0)
+		return rc;
+
+	for (i = 0; i < wled->cfg.num_strings; i++) {
+		j = wled->cfg.enabled_strings[i];
+		temp = j + WLED4_SINK_REG_CURR_SINK_SHFT;
+		sink_en |= 1 << temp;
+	}
+
+	if (sink_cfg == sink_en) {
+		rc = wled_auto_detection_at_init(wled);
+		return rc;
+	}
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->sink_addr + WLED4_SINK_REG_CURR_SINK,
+				WLED4_SINK_REG_CURR_SINK_MASK, 0);
+	if (rc < 0)
+		return rc;
+
+	rc = regmap_update_bits(wled->regmap, wled->ctrl_addr +
+				WLED3_CTRL_REG_MOD_EN,
+				WLED3_CTRL_REG_MOD_EN_MASK, 0);
+	if (rc < 0)
+		return rc;
+
+	/* Per sink/string configuration */
+	for (i = 0; i < wled->cfg.num_strings; i++) {
+		j = wled->cfg.enabled_strings[i];
+
+		addr = wled->sink_addr +
+				WLED4_SINK_REG_STR_MOD_EN(j);
+		rc = regmap_update_bits(wled->regmap, addr,
+					WLED4_SINK_REG_STR_MOD_MASK,
+					WLED4_SINK_REG_STR_MOD_MASK);
+		if (rc < 0)
+			return rc;
+
+		addr = wled->sink_addr +
+				WLED4_SINK_REG_STR_FULL_SCALE_CURR(j);
+		rc = regmap_update_bits(wled->regmap, addr,
+					WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK,
+					wled->cfg.string_i_limit);
+		if (rc < 0)
+			return rc;
+	}
+
+	rc = wled4_cabc_config(wled, wled->cfg.cabc);
+	if (rc < 0)
+		return rc;
+
+	rc = regmap_update_bits(wled->regmap, wled->ctrl_addr +
+				WLED3_CTRL_REG_MOD_EN,
+				WLED3_CTRL_REG_MOD_EN_MASK,
+				WLED3_CTRL_REG_MOD_EN_MASK);
+	if (rc < 0)
+		return rc;
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->sink_addr + WLED4_SINK_REG_CURR_SINK,
+				WLED4_SINK_REG_CURR_SINK_MASK, sink_en);
+	if (rc < 0)
+		return rc;
+
+	rc = wled->wled_sync_toggle(wled);
+	if (rc < 0) {
+		dev_err(wled->dev, "Failed to toggle sync reg rc:%d\n", rc);
+		return rc;
+	}
+
+	rc = wled_auto_detection_at_init(wled);
+
+	return rc;
+}
+
+static const struct wled_config wled4_config_defaults = {
+	.boost_i_limit = 4,
+	.string_i_limit = 10,
+	.ovp = 1,
+	.num_strings = 4,
+	.switch_freq = 11,
+	.cabc = false,
+	.external_pfet = false,
+	.auto_detection_enabled = false,
+};
+
+static int wled5_setup(struct wled *wled)
+{
+	int rc, temp, i, j, offset;
+	u8 sink_en = 0;
+	u16 addr;
+	u32 val;
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->ctrl_addr + WLED3_CTRL_REG_OVP,
+				WLED5_CTRL_REG_OVP_MASK, wled->cfg.ovp);
+	if (rc < 0)
+		return rc;
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->ctrl_addr + WLED3_CTRL_REG_ILIMIT,
+				WLED3_CTRL_REG_ILIMIT_MASK,
+				wled->cfg.boost_i_limit);
+	if (rc < 0)
+		return rc;
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->ctrl_addr + WLED3_CTRL_REG_FREQ,
+				WLED3_CTRL_REG_FREQ_MASK,
+				wled->cfg.switch_freq);
+	if (rc < 0)
+		return rc;
+
+	/* Per sink/string configuration */
+	for (i = 0; i < wled->cfg.num_strings; ++i) {
+		j = wled->cfg.enabled_strings[i];
+		addr = wled->sink_addr +
+				WLED4_SINK_REG_STR_FULL_SCALE_CURR(j);
+		rc = regmap_update_bits(wled->regmap, addr,
+					WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK,
+					wled->cfg.string_i_limit);
+		if (rc < 0)
+			return rc;
+
+		addr = wled->sink_addr + WLED5_SINK_REG_STR_SRC_SEL(j);
+		rc = regmap_update_bits(wled->regmap, addr,
+					WLED5_SINK_REG_SRC_SEL_MASK,
+					wled->cfg.mod_sel == MOD_A ?
+					WLED5_SINK_REG_SRC_SEL_MOD_A :
+					WLED5_SINK_REG_SRC_SEL_MOD_B);
+
+		temp = j + WLED4_SINK_REG_CURR_SINK_SHFT;
+		sink_en |= 1 << temp;
+	}
+
+	rc = wled5_cabc_config(wled, wled->cfg.cabc_sel ? true : false);
+	if (rc < 0)
+		return rc;
+
+	/* Enable one of the modulators A or B based on mod_sel */
+	addr = wled->sink_addr + WLED5_SINK_REG_MOD_A_EN;
+	val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_MOD_EN_MASK : 0;
+	rc = regmap_update_bits(wled->regmap, addr,
+				WLED5_SINK_REG_MOD_EN_MASK, val);
+	if (rc < 0)
+		return rc;
+
+	addr = wled->sink_addr + WLED5_SINK_REG_MOD_B_EN;
+	val = (wled->cfg.mod_sel == MOD_B) ? WLED5_SINK_REG_MOD_EN_MASK : 0;
+	rc = regmap_update_bits(wled->regmap, addr,
+				WLED5_SINK_REG_MOD_EN_MASK, val);
+	if (rc < 0)
+		return rc;
+
+	offset = (wled->cfg.mod_sel == MOD_A) ?
+		  WLED5_SINK_REG_MOD_A_BRIGHTNESS_WIDTH_SEL :
+		  WLED5_SINK_REG_MOD_B_BRIGHTNESS_WIDTH_SEL;
+
+	addr = wled->sink_addr + offset;
+	val = (wled->max_brightness == WLED5_SINK_REG_BRIGHT_MAX_15B) ?
+		 WLED5_SINK_REG_BRIGHTNESS_WIDTH_15B :
+		 WLED5_SINK_REG_BRIGHTNESS_WIDTH_12B;
+	rc = regmap_write(wled->regmap, addr, val);
+	if (rc < 0)
+		return rc;
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->sink_addr + WLED4_SINK_REG_CURR_SINK,
+				WLED4_SINK_REG_CURR_SINK_MASK, sink_en);
+	if (rc < 0)
+		return rc;
+
+	/* This updates only FSC configuration in WLED5 */
+	rc = wled->wled_sync_toggle(wled);
+	if (rc < 0) {
+		pr_err("Failed to toggle sync reg rc:%d\n", rc);
+		return rc;
+	}
+
+	rc = wled_auto_detection_at_init(wled);
+	if (rc < 0)
+		return rc;
+
+	return 0;
+}
+
+static const struct wled_config wled5_config_defaults = {
+	.boost_i_limit = 5,
+	.string_i_limit = 10,
+	.ovp = 4,
+	.num_strings = 4,
+	.switch_freq = 11,
+	.mod_sel = 0,
+	.cabc_sel = 0,
+	.cabc = false,
+	.external_pfet = false,
+	.auto_detection_enabled = false,
+};
+
+static const u32 wled3_boost_i_limit_values[] = {
+	105, 385, 525, 805, 980, 1260, 1400, 1680,
+};
+
+static const struct wled_var_cfg wled3_boost_i_limit_cfg = {
+	.values = wled3_boost_i_limit_values,
+	.size = ARRAY_SIZE(wled3_boost_i_limit_values),
+};
+
+static const u32 wled4_boost_i_limit_values[] = {
+	105, 280, 450, 620, 970, 1150, 1300, 1500,
+};
+
+static const struct wled_var_cfg wled4_boost_i_limit_cfg = {
+	.values = wled4_boost_i_limit_values,
+	.size = ARRAY_SIZE(wled4_boost_i_limit_values),
+};
+
+static inline u32 wled5_boost_i_limit_values_fn(u32 idx)
+{
+	return 525 + (idx * 175);
+}
+
+static const struct wled_var_cfg wled5_boost_i_limit_cfg = {
+	.fn = wled5_boost_i_limit_values_fn,
+	.size = 8,
+};
+
+static const u32 wled3_ovp_values[] = {
+	35, 32, 29, 27,
+};
+
+static const struct wled_var_cfg wled3_ovp_cfg = {
+	.values = wled3_ovp_values,
+	.size = ARRAY_SIZE(wled3_ovp_values),
+};
+
+static const u32 wled4_ovp_values[] = {
+	31100, 29600, 19600, 18100,
+};
+
+static const struct wled_var_cfg wled4_ovp_cfg = {
+	.values = wled4_ovp_values,
+	.size = ARRAY_SIZE(wled4_ovp_values),
+};
+
+static inline u32 wled5_ovp_values_fn(u32 idx)
+{
+	/*
+	 * 0000 - 38.5 V
+	 * 0001 - 37 V ..
+	 * 1111 - 16 V
+	 */
+	return 38500 - (idx * 1500);
+}
+
+static const struct wled_var_cfg wled5_ovp_cfg = {
+	.fn = wled5_ovp_values_fn,
+	.size = 16,
+};
+
+static u32 wled3_switch_freq_values_fn(u32 idx)
+{
+	return 19200 / (2 * (1 + idx));
+}
+
+static const struct wled_var_cfg wled3_switch_freq_cfg = {
+	.fn = wled3_switch_freq_values_fn,
+	.size = 16,
+};
+
+static const struct wled_var_cfg wled3_string_i_limit_cfg = {
+	.size = 26,
+};
+
+static const u32 wled4_string_i_limit_values[] = {
+	0, 2500, 5000, 7500, 10000, 12500, 15000, 17500, 20000,
+	22500, 25000, 27500, 30000,
+};
+
+static const struct wled_var_cfg wled4_string_i_limit_cfg = {
+	.values = wled4_string_i_limit_values,
+	.size = ARRAY_SIZE(wled4_string_i_limit_values),
+};
+
+static const struct wled_var_cfg wled5_mod_sel_cfg = {
+	.size = 2,
+};
+
+static const struct wled_var_cfg wled5_cabc_sel_cfg = {
+	.size = 4,
+};
+
+static u32 wled_values(const struct wled_var_cfg *cfg, u32 idx)
+{
+	if (idx >= cfg->size)
+		return UINT_MAX;
+	if (cfg->fn)
+		return cfg->fn(idx);
+	if (cfg->values)
+		return cfg->values[idx];
+	return idx;
+}
+
+static int wled_configure(struct wled *wled)
+{
+	struct wled_config *cfg = &wled->cfg;
+	struct device *dev = wled->dev;
+	const __be32 *prop_addr;
+	u32 size, val, c;
+	int rc, i, j, string_len;
+
+	const struct wled_u32_opts *u32_opts = NULL;
+	const struct wled_u32_opts wled3_opts[] = {
+		{
+			.name = "qcom,current-boost-limit",
+			.val_ptr = &cfg->boost_i_limit,
+			.cfg = &wled3_boost_i_limit_cfg,
+		},
+		{
+			.name = "qcom,current-limit",
+			.val_ptr = &cfg->string_i_limit,
+			.cfg = &wled3_string_i_limit_cfg,
+		},
+		{
+			.name = "qcom,ovp",
+			.val_ptr = &cfg->ovp,
+			.cfg = &wled3_ovp_cfg,
+		},
+		{
+			.name = "qcom,switching-freq",
+			.val_ptr = &cfg->switch_freq,
+			.cfg = &wled3_switch_freq_cfg,
+		},
+	};
+
+	const struct wled_u32_opts wled4_opts[] = {
+		{
+			.name = "qcom,current-boost-limit",
+			.val_ptr = &cfg->boost_i_limit,
+			.cfg = &wled4_boost_i_limit_cfg,
+		},
+		{
+			.name = "qcom,current-limit-microamp",
+			.val_ptr = &cfg->string_i_limit,
+			.cfg = &wled4_string_i_limit_cfg,
+		},
+		{
+			.name = "qcom,ovp-millivolt",
+			.val_ptr = &cfg->ovp,
+			.cfg = &wled4_ovp_cfg,
+		},
+		{
+			.name = "qcom,switching-freq",
+			.val_ptr = &cfg->switch_freq,
+			.cfg = &wled3_switch_freq_cfg,
+		},
+	};
+
+	const struct wled_u32_opts wled5_opts[] = {
+		{
+			.name = "qcom,current-boost-limit",
+			.val_ptr = &cfg->boost_i_limit,
+			.cfg = &wled5_boost_i_limit_cfg,
+		},
+		{
+			.name = "qcom,current-limit-microamp",
+			.val_ptr = &cfg->string_i_limit,
+			.cfg = &wled4_string_i_limit_cfg,
+		},
+		{
+			.name = "qcom,ovp-millivolt",
+			.val_ptr = &cfg->ovp,
+			.cfg = &wled5_ovp_cfg,
+		},
+		{
+			.name = "qcom,switching-freq",
+			.val_ptr = &cfg->switch_freq,
+			.cfg = &wled3_switch_freq_cfg,
+		},
+		{
+			.name = "qcom,modulator-sel",
+			.val_ptr = &cfg->mod_sel,
+			.cfg = &wled5_mod_sel_cfg,
+		},
+		{
+			.name = "qcom,cabc-sel",
+			.val_ptr = &cfg->cabc_sel,
+			.cfg = &wled5_cabc_sel_cfg,
+		},
+	};
+
+	const struct wled_bool_opts bool_opts[] = {
+		{ "qcom,cs-out", &cfg->cs_out_en, },
+		{ "qcom,ext-gen", &cfg->ext_gen, },
+		{ "qcom,cabc", &cfg->cabc, },
+		{ "qcom,external-pfet", &cfg->external_pfet, },
+		{ "qcom,auto-string-detection", &cfg->auto_detection_enabled, },
+	};
+
+	prop_addr = of_get_address(dev->of_node, 0, NULL, NULL);
+	if (!prop_addr) {
+		dev_err(wled->dev, "invalid IO resources\n");
+		return -EINVAL;
+	}
+	wled->ctrl_addr = be32_to_cpu(*prop_addr);
+
+	rc = of_property_read_string(dev->of_node, "label", &wled->name);
+	if (rc)
+		wled->name = devm_kasprintf(dev, GFP_KERNEL, "%pOFn", dev->of_node);
+
+	switch (wled->version) {
+	case 3:
+		u32_opts = wled3_opts;
+		size = ARRAY_SIZE(wled3_opts);
+		*cfg = wled3_config_defaults;
+		wled->wled_set_brightness = wled3_set_brightness;
+		wled->wled_sync_toggle = wled3_sync_toggle;
+		wled->max_string_count = 3;
+		wled->sink_addr = wled->ctrl_addr;
+		break;
+
+	case 4:
+		u32_opts = wled4_opts;
+		size = ARRAY_SIZE(wled4_opts);
+		*cfg = wled4_config_defaults;
+		wled->wled_set_brightness = wled4_set_brightness;
+		wled->wled_sync_toggle = wled3_sync_toggle;
+		wled->wled_cabc_config = wled4_cabc_config;
+		wled->wled_ovp_delay = wled4_ovp_delay;
+		wled->wled_auto_detection_required =
+					wled4_auto_detection_required;
+		wled->max_string_count = 4;
+
+		prop_addr = of_get_address(dev->of_node, 1, NULL, NULL);
+		if (!prop_addr) {
+			dev_err(wled->dev, "invalid IO resources\n");
+			return -EINVAL;
+		}
+		wled->sink_addr = be32_to_cpu(*prop_addr);
+		break;
+
+	case 5:
+		u32_opts = wled5_opts;
+		size = ARRAY_SIZE(wled5_opts);
+		*cfg = wled5_config_defaults;
+		wled->wled_set_brightness = wled5_set_brightness;
+		wled->wled_sync_toggle = wled3_sync_toggle;
+		wled->wled_cabc_config = wled5_cabc_config;
+		wled->wled_ovp_delay = wled5_ovp_delay;
+		wled->wled_auto_detection_required =
+					wled5_auto_detection_required;
+		wled->max_string_count = 4;
+
+		prop_addr = of_get_address(dev->of_node, 1, NULL, NULL);
+		if (!prop_addr) {
+			dev_err(wled->dev, "invalid IO resources\n");
+			return -EINVAL;
+		}
+		wled->sink_addr = be32_to_cpu(*prop_addr);
+		break;
+
+	default:
+		dev_err(wled->dev, "Invalid WLED version\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < size; ++i) {
+		rc = of_property_read_u32(dev->of_node, u32_opts[i].name, &val);
+		if (rc == -EINVAL) {
+			continue;
+		} else if (rc) {
+			dev_err(dev, "error reading '%s'\n", u32_opts[i].name);
+			return rc;
+		}
+
+		c = UINT_MAX;
+		for (j = 0; c != val; j++) {
+			c = wled_values(u32_opts[i].cfg, j);
+			if (c == UINT_MAX) {
+				dev_err(dev, "invalid value for '%s'\n",
+					u32_opts[i].name);
+				return -EINVAL;
+			}
+
+			if (c == val)
+				break;
+		}
+
+		dev_dbg(dev, "'%s' = %u\n", u32_opts[i].name, c);
+		*u32_opts[i].val_ptr = j;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(bool_opts); ++i) {
+		if (of_property_read_bool(dev->of_node, bool_opts[i].name))
+			*bool_opts[i].val_ptr = true;
+	}
+
+	string_len = of_property_count_elems_of_size(dev->of_node,
+						     "qcom,enabled-strings",
+						     sizeof(u32));
+	if (string_len > 0) {
+		if (string_len > wled->max_string_count) {
+			dev_err(dev, "Cannot have more than %d strings\n",
+				wled->max_string_count);
+			return -EINVAL;
+		}
+
+		rc = of_property_read_u32_array(dev->of_node,
+						"qcom,enabled-strings",
+						wled->cfg.enabled_strings,
+						string_len);
+		if (rc) {
+			dev_err(dev, "Failed to read %d elements from qcom,enabled-strings: %d\n",
+				string_len, rc);
+			return rc;
+		}
+
+		for (i = 0; i < string_len; ++i) {
+			if (wled->cfg.enabled_strings[i] >= wled->max_string_count) {
+				dev_err(dev,
+					"qcom,enabled-strings index %d at %d is out of bounds\n",
+					wled->cfg.enabled_strings[i], i);
+				return -EINVAL;
+			}
+		}
+
+		cfg->num_strings = string_len;
+	}
+
+	rc = of_property_read_u32(dev->of_node, "qcom,num-strings", &val);
+	if (!rc) {
+		if (val < 1 || val > wled->max_string_count) {
+			dev_err(dev, "qcom,num-strings must be between 1 and %d\n",
+				wled->max_string_count);
+			return -EINVAL;
+		}
+
+		if (string_len > 0) {
+			dev_warn(dev, "Only one of qcom,num-strings or qcom,enabled-strings"
+				      " should be set\n");
+			if (val > string_len) {
+				dev_err(dev, "qcom,num-strings exceeds qcom,enabled-strings\n");
+				return -EINVAL;
+			}
+		}
+
+		cfg->num_strings = val;
+	}
+
+	return 0;
+}
+
+static int wled_configure_short_irq(struct wled *wled,
+				    struct platform_device *pdev)
+{
+	int rc;
+
+	if (!wled->has_short_detect)
+		return 0;
+
+	rc = regmap_update_bits(wled->regmap, wled->ctrl_addr +
+				WLED4_CTRL_REG_SHORT_PROTECT,
+				WLED4_CTRL_REG_SHORT_EN_MASK,
+				WLED4_CTRL_REG_SHORT_EN_MASK);
+	if (rc < 0)
+		return rc;
+
+	wled->short_irq = platform_get_irq_byname(pdev, "short");
+	if (wled->short_irq < 0) {
+		dev_dbg(&pdev->dev, "short irq is not used\n");
+		return 0;
+	}
+
+	rc = devm_request_threaded_irq(wled->dev, wled->short_irq,
+				       NULL, wled_short_irq_handler,
+				       IRQF_ONESHOT,
+				       "wled_short_irq", wled);
+	if (rc < 0)
+		dev_err(wled->dev, "Unable to request short_irq (err:%d)\n",
+			rc);
+
+	return rc;
+}
+
+static int wled_configure_ovp_irq(struct wled *wled,
+				  struct platform_device *pdev)
+{
+	int rc;
+	u32 val;
+
+	wled->ovp_irq = platform_get_irq_byname(pdev, "ovp");
+	if (wled->ovp_irq < 0) {
+		dev_dbg(&pdev->dev, "OVP IRQ not found - disabling automatic string detection\n");
+		return 0;
+	}
+
+	rc = devm_request_threaded_irq(wled->dev, wled->ovp_irq, NULL,
+				       wled_ovp_irq_handler, IRQF_ONESHOT,
+				       "wled_ovp_irq", wled);
+	if (rc < 0) {
+		dev_err(wled->dev, "Unable to request ovp_irq (err:%d)\n",
+			rc);
+		wled->ovp_irq = 0;
+		return 0;
+	}
+
+	rc = regmap_read(wled->regmap, wled->ctrl_addr +
+			 WLED3_CTRL_REG_MOD_EN, &val);
+	if (rc < 0)
+		return rc;
+
+	/* Keep OVP irq disabled until module is enabled */
+	if (!(val & WLED3_CTRL_REG_MOD_EN_MASK))
+		disable_irq(wled->ovp_irq);
+
+	return 0;
+}
+
+static const struct backlight_ops wled_ops = {
+	.update_status = wled_update_status,
+};
+
+static int wled_probe(struct platform_device *pdev)
+{
+	struct backlight_properties props;
+	struct backlight_device *bl;
+	struct wled *wled;
+	struct regmap *regmap;
+	u32 val;
+	int rc;
+
+	regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!regmap) {
+		dev_err(&pdev->dev, "Unable to get regmap\n");
+		return -EINVAL;
+	}
+
+	wled = devm_kzalloc(&pdev->dev, sizeof(*wled), GFP_KERNEL);
+	if (!wled)
+		return -ENOMEM;
+
+	wled->regmap = regmap;
+	wled->dev = &pdev->dev;
+
+	wled->version = (uintptr_t)of_device_get_match_data(&pdev->dev);
+	if (!wled->version) {
+		dev_err(&pdev->dev, "Unknown device version\n");
+		return -ENODEV;
+	}
+
+	mutex_init(&wled->lock);
+	rc = wled_configure(wled);
+	if (rc)
+		return rc;
+
+	val = WLED3_SINK_REG_BRIGHT_MAX;
+	of_property_read_u32(pdev->dev.of_node, "max-brightness", &val);
+	wled->max_brightness = val;
+
+	switch (wled->version) {
+	case 3:
+		wled->cfg.auto_detection_enabled = false;
+		rc = wled3_setup(wled);
+		if (rc) {
+			dev_err(&pdev->dev, "wled3_setup failed\n");
+			return rc;
+		}
+		break;
+
+	case 4:
+		wled->has_short_detect = true;
+		rc = wled4_setup(wled);
+		if (rc) {
+			dev_err(&pdev->dev, "wled4_setup failed\n");
+			return rc;
+		}
+		break;
+
+	case 5:
+		wled->has_short_detect = true;
+		if (wled->cfg.cabc_sel)
+			wled->max_brightness = WLED5_SINK_REG_BRIGHT_MAX_12B;
+
+		rc = wled5_setup(wled);
+		if (rc) {
+			dev_err(&pdev->dev, "wled5_setup failed\n");
+			return rc;
+		}
+		break;
+
+	default:
+		dev_err(wled->dev, "Invalid WLED version\n");
+		break;
+	}
+
+	INIT_DELAYED_WORK(&wled->ovp_work, wled_ovp_work);
+
+	rc = wled_configure_short_irq(wled, pdev);
+	if (rc < 0)
+		return rc;
+
+	rc = wled_configure_ovp_irq(wled, pdev);
+	if (rc < 0)
+		return rc;
+
+	val = WLED_DEFAULT_BRIGHTNESS;
+	of_property_read_u32(pdev->dev.of_node, "default-brightness", &val);
+
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.type = BACKLIGHT_RAW;
+	props.brightness = val;
+	props.max_brightness = wled->max_brightness;
+	bl = devm_backlight_device_register(&pdev->dev, wled->name,
+					    &pdev->dev, wled,
+					    &wled_ops, &props);
+	return PTR_ERR_OR_ZERO(bl);
+};
+
+static int wled_remove(struct platform_device *pdev)
+{
+	struct wled *wled = dev_get_drvdata(&pdev->dev);
+
+	mutex_destroy(&wled->lock);
+	cancel_delayed_work_sync(&wled->ovp_work);
+	disable_irq(wled->short_irq);
+	disable_irq(wled->ovp_irq);
+
+	return 0;
+}
+
+static const struct of_device_id wled_match_table[] = {
+	{ .compatible = "qcom,pm8941-wled", .data = (void *)3 },
+	{ .compatible = "qcom,pmi8998-wled", .data = (void *)4 },
+	{ .compatible = "qcom,pm660l-wled", .data = (void *)4 },
+	{ .compatible = "qcom,pm8150l-wled", .data = (void *)5 },
+	{}
+};
+MODULE_DEVICE_TABLE(of, wled_match_table);
+
+static struct platform_driver wled_driver = {
+	.probe = wled_probe,
+	.remove = wled_remove,
+	.driver	= {
+		.name = "qcom,wled",
+		.of_match_table	= wled_match_table,
+	},
+};
+
+module_platform_driver(wled_driver);
+
+MODULE_DESCRIPTION("Qualcomm WLED driver");
+MODULE_LICENSE("GPL v2");