summaryrefslogtreecommitdiffstats
path: root/kernel/dma/Kconfig
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-27 10:05:51 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-27 10:05:51 +0000
commit5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch)
treea94efe259b9009378be6d90eb30d2b019d95c194 /kernel/dma/Kconfig
parentInitial commit. (diff)
downloadlinux-5d1646d90e1f2cceb9f0828f4b28318cd0ec7744.tar.xz
linux-5d1646d90e1f2cceb9f0828f4b28318cd0ec7744.zip
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'kernel/dma/Kconfig')
-rw-r--r--kernel/dma/Kconfig227
1 files changed, 227 insertions, 0 deletions
diff --git a/kernel/dma/Kconfig b/kernel/dma/Kconfig
new file mode 100644
index 000000000..c99de4a21
--- /dev/null
+++ b/kernel/dma/Kconfig
@@ -0,0 +1,227 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config NO_DMA
+ bool
+
+config HAS_DMA
+ bool
+ depends on !NO_DMA
+ default y
+
+config DMA_OPS
+ depends on HAS_DMA
+ bool
+
+#
+# IOMMU drivers that can bypass the IOMMU code and optionally use the direct
+# mapping fast path should select this option and set the dma_ops_bypass
+# flag in struct device where applicable
+#
+config DMA_OPS_BYPASS
+ bool
+
+config NEED_SG_DMA_LENGTH
+ bool
+
+config NEED_DMA_MAP_STATE
+ bool
+
+config ARCH_DMA_ADDR_T_64BIT
+ def_bool 64BIT || PHYS_ADDR_T_64BIT
+
+config ARCH_HAS_DMA_COHERENCE_H
+ bool
+
+config ARCH_HAS_DMA_SET_MASK
+ bool
+
+#
+# Select this option if the architecture needs special handling for
+# DMA_ATTR_WRITE_COMBINE. Normally the "uncached" mapping should be what
+# people thing of when saying write combine, so very few platforms should
+# need to enable this.
+#
+config ARCH_HAS_DMA_WRITE_COMBINE
+ bool
+
+#
+# Select if the architectures provides the arch_dma_mark_clean hook
+#
+config ARCH_HAS_DMA_MARK_CLEAN
+ bool
+
+config DMA_DECLARE_COHERENT
+ bool
+
+config ARCH_HAS_SETUP_DMA_OPS
+ bool
+
+config ARCH_HAS_TEARDOWN_DMA_OPS
+ bool
+
+config ARCH_HAS_SYNC_DMA_FOR_DEVICE
+ bool
+
+config ARCH_HAS_SYNC_DMA_FOR_CPU
+ bool
+ select NEED_DMA_MAP_STATE
+
+config ARCH_HAS_SYNC_DMA_FOR_CPU_ALL
+ bool
+
+config ARCH_HAS_DMA_PREP_COHERENT
+ bool
+
+config ARCH_HAS_FORCE_DMA_UNENCRYPTED
+ bool
+
+config DMA_VIRT_OPS
+ bool
+ depends on HAS_DMA
+ select DMA_OPS
+
+config SWIOTLB
+ bool
+ select NEED_DMA_MAP_STATE
+
+#
+# Should be selected if we can mmap non-coherent mappings to userspace.
+# The only thing that is really required is a way to set an uncached bit
+# in the pagetables
+#
+config DMA_NONCOHERENT_MMAP
+ default y if !MMU
+ bool
+
+config DMA_COHERENT_POOL
+ select GENERIC_ALLOCATOR
+ bool
+
+config DMA_REMAP
+ bool
+ depends on MMU
+ select DMA_NONCOHERENT_MMAP
+
+config DMA_DIRECT_REMAP
+ bool
+ select DMA_REMAP
+ select DMA_COHERENT_POOL
+
+config DMA_CMA
+ bool "DMA Contiguous Memory Allocator"
+ depends on HAVE_DMA_CONTIGUOUS && CMA
+ help
+ This enables the Contiguous Memory Allocator which allows drivers
+ to allocate big physically-contiguous blocks of memory for use with
+ hardware components that do not support I/O map nor scatter-gather.
+
+ You can disable CMA by specifying "cma=0" on the kernel's command
+ line.
+
+ For more information see <kernel/dma/contiguous.c>.
+ If unsure, say "n".
+
+if DMA_CMA
+
+config DMA_PERNUMA_CMA
+ bool "Enable separate DMA Contiguous Memory Area for each NUMA Node"
+ default NUMA && ARM64
+ help
+ Enable this option to get pernuma CMA areas so that devices like
+ ARM64 SMMU can get local memory by DMA coherent APIs.
+
+ You can set the size of pernuma CMA by specifying "cma_pernuma=size"
+ on the kernel's command line.
+
+comment "Default contiguous memory area size:"
+
+config CMA_SIZE_MBYTES
+ int "Size in Mega Bytes"
+ depends on !CMA_SIZE_SEL_PERCENTAGE
+ default 0 if X86
+ default 16
+ help
+ Defines the size (in MiB) of the default memory area for Contiguous
+ Memory Allocator. If the size of 0 is selected, CMA is disabled by
+ default, but it can be enabled by passing cma=size[MG] to the kernel.
+
+
+config CMA_SIZE_PERCENTAGE
+ int "Percentage of total memory"
+ depends on !CMA_SIZE_SEL_MBYTES
+ default 0 if X86
+ default 10
+ help
+ Defines the size of the default memory area for Contiguous Memory
+ Allocator as a percentage of the total memory in the system.
+ If 0 percent is selected, CMA is disabled by default, but it can be
+ enabled by passing cma=size[MG] to the kernel.
+
+choice
+ prompt "Selected region size"
+ default CMA_SIZE_SEL_MBYTES
+
+config CMA_SIZE_SEL_MBYTES
+ bool "Use mega bytes value only"
+
+config CMA_SIZE_SEL_PERCENTAGE
+ bool "Use percentage value only"
+
+config CMA_SIZE_SEL_MIN
+ bool "Use lower value (minimum)"
+
+config CMA_SIZE_SEL_MAX
+ bool "Use higher value (maximum)"
+
+endchoice
+
+config CMA_ALIGNMENT
+ int "Maximum PAGE_SIZE order of alignment for contiguous buffers"
+ range 2 12
+ default 8
+ help
+ DMA mapping framework by default aligns all buffers to the smallest
+ PAGE_SIZE order which is greater than or equal to the requested buffer
+ size. This works well for buffers up to a few hundreds kilobytes, but
+ for larger buffers it just a memory waste. With this parameter you can
+ specify the maximum PAGE_SIZE order for contiguous buffers. Larger
+ buffers will be aligned only to this specified order. The order is
+ expressed as a power of two multiplied by the PAGE_SIZE.
+
+ For example, if your system defaults to 4KiB pages, the order value
+ of 8 means that the buffers will be aligned up to 1MiB only.
+
+ If unsure, leave the default value "8".
+
+endif
+
+config DMA_API_DEBUG
+ bool "Enable debugging of DMA-API usage"
+ select NEED_DMA_MAP_STATE
+ help
+ Enable this option to debug the use of the DMA API by device drivers.
+ With this option you will be able to detect common bugs in device
+ drivers like double-freeing of DMA mappings or freeing mappings that
+ were never allocated.
+
+ This option causes a performance degradation. Use only if you want to
+ debug device drivers and dma interactions.
+
+ If unsure, say N.
+
+config DMA_API_DEBUG_SG
+ bool "Debug DMA scatter-gather usage"
+ default y
+ depends on DMA_API_DEBUG
+ help
+ Perform extra checking that callers of dma_map_sg() have respected the
+ appropriate segment length/boundary limits for the given device when
+ preparing DMA scatterlists.
+
+ This is particularly likely to have been overlooked in cases where the
+ dma_map_sg() API is used for general bulk mapping of pages rather than
+ preparing literal scatter-gather descriptors, where there is a risk of
+ unexpected behaviour from DMA API implementations if the scatterlist
+ is technically out-of-spec.
+
+ If unsure, say N.