Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

37 files changed, 10180 insertions, 0 deletions

diff --git a/sound/pci/echoaudio/Makefile b/sound/pci/echoaudio/Makefile
new file mode 100644
index 000000000..4865b8fe7
--- /dev/null
+++ b/sound/pci/echoaudio/Makefile
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for ALSA Echoaudio soundcard drivers
+# Copyright (c) 2003 by Giuliano Pochini <pochini@shiny.it>
+#
+
+snd-darla20-objs := darla20.o
+snd-gina20-objs := gina20.o
+snd-layla20-objs := layla20.o
+snd-darla24-objs := darla24.o
+snd-gina24-objs := gina24.o
+snd-layla24-objs := layla24.o
+snd-mona-objs := mona.o
+snd-mia-objs := mia.o
+snd-echo3g-objs := echo3g.o
+snd-indigo-objs := indigo.o
+snd-indigoio-objs := indigoio.o
+snd-indigodj-objs := indigodj.o
+snd-indigoiox-objs := indigoiox.o
+snd-indigodjx-objs := indigodjx.o
+
+obj-$(CONFIG_SND_DARLA20) += snd-darla20.o
+obj-$(CONFIG_SND_GINA20) += snd-gina20.o
+obj-$(CONFIG_SND_LAYLA20) += snd-layla20.o
+obj-$(CONFIG_SND_DARLA24) += snd-darla24.o
+obj-$(CONFIG_SND_GINA24) += snd-gina24.o
+obj-$(CONFIG_SND_LAYLA24) += snd-layla24.o
+obj-$(CONFIG_SND_MONA) += snd-mona.o
+obj-$(CONFIG_SND_MIA) += snd-mia.o
+obj-$(CONFIG_SND_ECHO3G) += snd-echo3g.o
+obj-$(CONFIG_SND_INDIGO) += snd-indigo.o
+obj-$(CONFIG_SND_INDIGOIO) += snd-indigoio.o
+obj-$(CONFIG_SND_INDIGODJ) += snd-indigodj.o
+obj-$(CONFIG_SND_INDIGOIOX) += snd-indigoiox.o
+obj-$(CONFIG_SND_INDIGODJX) += snd-indigodjx.o
diff --git a/sound/pci/echoaudio/darla20.c b/sound/pci/echoaudio/darla20.c
new file mode 100644
index 000000000..e295c71c7
--- /dev/null
+++ b/sound/pci/echoaudio/darla20.c
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  ALSA driver for Echoaudio soundcards.
+ *  Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ */
+
+#define ECHOGALS_FAMILY
+#define ECHOCARD_DARLA20
+#define ECHOCARD_NAME "Darla20"
+#define ECHOCARD_HAS_MONITOR
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT	0	/* 8 */
+#define PX_DIGITAL_OUT	8	/* 0 */
+#define PX_ANALOG_IN	8	/* 2 */
+#define PX_DIGITAL_IN	10	/* 0 */
+#define PX_NUM		10
+
+/* Bus indexes */
+#define BX_ANALOG_OUT	0	/* 8 */
+#define BX_DIGITAL_OUT	8	/* 0 */
+#define BX_ANALOG_IN	8	/* 2 */
+#define BX_DIGITAL_IN	10	/* 0 */
+#define BX_NUM		10
+
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/tlv.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <linux/atomic.h>
+#include "echoaudio.h"
+
+MODULE_FIRMWARE("ea/darla20_dsp.fw");
+
+#define FW_DARLA20_DSP	0
+
+static const struct firmware card_fw[] = {
+	{0, "darla20_dsp.fw"}
+};
+
+static const struct pci_device_id snd_echo_ids[] = {
+	{0x1057, 0x1801, 0xECC0, 0x0010, 0, 0, 0},	/* DSP 56301 Darla20 rev.0 */
+	{0,}
+};
+
+static const struct snd_pcm_hardware pcm_hardware_skel = {
+	.info = SNDRV_PCM_INFO_MMAP |
+		SNDRV_PCM_INFO_INTERLEAVED |
+		SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_PAUSE |
+		SNDRV_PCM_INFO_SYNC_START,
+	.formats =	SNDRV_PCM_FMTBIT_U8 |
+			SNDRV_PCM_FMTBIT_S16_LE |
+			SNDRV_PCM_FMTBIT_S24_3LE |
+			SNDRV_PCM_FMTBIT_S32_LE |
+			SNDRV_PCM_FMTBIT_S32_BE,
+	.rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000,
+	.rate_min = 44100,
+	.rate_max = 48000,
+	.channels_min = 1,
+	.channels_max = 2,
+	.buffer_bytes_max = 262144,
+	.period_bytes_min = 32,
+	.period_bytes_max = 131072,
+	.periods_min = 2,
+	.periods_max = 220,
+	/* One page (4k) contains 512 instructions. I don't know if the hw
+	supports lists longer than this. In this case periods_max=220 is a
+	safe limit to make sure the list never exceeds 512 instructions. */
+};
+
+
+#include "darla20_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio.c"
diff --git a/sound/pci/echoaudio/darla20_dsp.c b/sound/pci/echoaudio/darla20_dsp.c
new file mode 100644
index 000000000..320837ba7
--- /dev/null
+++ b/sound/pci/echoaudio/darla20_dsp.c
@@ -0,0 +1,129 @@
+/***************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+   *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+	int err;
+
+	if (snd_BUG_ON((subdevice_id & 0xfff0) != DARLA20))
+		return -ENODEV;
+
+	if ((err = init_dsp_comm_page(chip))) {
+		dev_err(chip->card->dev,
+			"init_hw: could not initialize DSP comm page\n");
+		return err;
+	}
+
+	chip->device_id = device_id;
+	chip->subdevice_id = subdevice_id;
+	chip->bad_board = true;
+	chip->dsp_code_to_load = FW_DARLA20_DSP;
+	chip->spdif_status = GD_SPDIF_STATUS_UNDEF;
+	chip->clock_state = GD_CLOCK_UNDEF;
+	/* Since this card has no ASIC, mark it as loaded so everything
+	   works OK */
+	chip->asic_loaded = true;
+	chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL;
+
+	if ((err = load_firmware(chip)) < 0)
+		return err;
+	chip->bad_board = false;
+
+	return err;
+}
+
+
+
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+	return init_line_levels(chip);
+}
+
+
+
+/* The Darla20 has no external clock sources */
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+	return ECHO_CLOCK_BIT_INTERNAL;
+}
+
+
+
+/* The Darla20 has no ASIC. Just do nothing */
+static int load_asic(struct echoaudio *chip)
+{
+	return 0;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+	u8 clock_state, spdif_status;
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	switch (rate) {
+	case 44100:
+		clock_state = GD_CLOCK_44;
+		spdif_status = GD_SPDIF_STATUS_44;
+		break;
+	case 48000:
+		clock_state = GD_CLOCK_48;
+		spdif_status = GD_SPDIF_STATUS_48;
+		break;
+	default:
+		clock_state = GD_CLOCK_NOCHANGE;
+		spdif_status = GD_SPDIF_STATUS_NOCHANGE;
+		break;
+	}
+
+	if (chip->clock_state == clock_state)
+		clock_state = GD_CLOCK_NOCHANGE;
+	if (spdif_status == chip->spdif_status)
+		spdif_status = GD_SPDIF_STATUS_NOCHANGE;
+
+	chip->comm_page->sample_rate = cpu_to_le32(rate);
+	chip->comm_page->gd_clock_state = clock_state;
+	chip->comm_page->gd_spdif_status = spdif_status;
+	chip->comm_page->gd_resampler_state = 3;	/* magic number - should always be 3 */
+
+	/* Save the new audio state if it changed */
+	if (clock_state != GD_CLOCK_NOCHANGE)
+		chip->clock_state = clock_state;
+	if (spdif_status != GD_SPDIF_STATUS_NOCHANGE)
+		chip->spdif_status = spdif_status;
+	chip->sample_rate = rate;
+
+	clear_handshake(chip);
+	return send_vector(chip, DSP_VC_SET_GD_AUDIO_STATE);
+}
diff --git a/sound/pci/echoaudio/darla24.c b/sound/pci/echoaudio/darla24.c
new file mode 100644
index 000000000..ae816e78f
--- /dev/null
+++ b/sound/pci/echoaudio/darla24.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  ALSA driver for Echoaudio soundcards.
+ *  Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ */
+
+#define ECHOGALS_FAMILY
+#define ECHOCARD_DARLA24
+#define ECHOCARD_NAME "Darla24"
+#define ECHOCARD_HAS_MONITOR
+#define ECHOCARD_HAS_INPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_EXTERNAL_CLOCK
+#define ECHOCARD_HAS_SUPER_INTERLEAVE
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT	0	/* 8 */
+#define PX_DIGITAL_OUT	8	/* 0 */
+#define PX_ANALOG_IN	8	/* 2 */
+#define PX_DIGITAL_IN	10	/* 0 */
+#define PX_NUM		10
+
+/* Bus indexes */
+#define BX_ANALOG_OUT	0	/* 8 */
+#define BX_DIGITAL_OUT	8	/* 0 */
+#define BX_ANALOG_IN	8	/* 2 */
+#define BX_DIGITAL_IN	10	/* 0 */
+#define BX_NUM		10
+
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/tlv.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <linux/atomic.h>
+#include "echoaudio.h"
+
+MODULE_FIRMWARE("ea/darla24_dsp.fw");
+
+#define FW_DARLA24_DSP	0
+
+static const struct firmware card_fw[] = {
+	{0, "darla24_dsp.fw"}
+};
+
+static const struct pci_device_id snd_echo_ids[] = {
+	{0x1057, 0x1801, 0xECC0, 0x0040, 0, 0, 0},	/* DSP 56301 Darla24 rev.0 */
+	{0x1057, 0x1801, 0xECC0, 0x0041, 0, 0, 0},	/* DSP 56301 Darla24 rev.1 */
+	{0,}
+};
+
+static const struct snd_pcm_hardware pcm_hardware_skel = {
+	.info = SNDRV_PCM_INFO_MMAP |
+		SNDRV_PCM_INFO_INTERLEAVED |
+		SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_PAUSE |
+		SNDRV_PCM_INFO_SYNC_START,
+	.formats =	SNDRV_PCM_FMTBIT_U8 |
+			SNDRV_PCM_FMTBIT_S16_LE |
+			SNDRV_PCM_FMTBIT_S24_3LE |
+			SNDRV_PCM_FMTBIT_S32_LE |
+			SNDRV_PCM_FMTBIT_S32_BE,
+	.rates =	SNDRV_PCM_RATE_8000_48000 |
+			SNDRV_PCM_RATE_88200 |
+			SNDRV_PCM_RATE_96000,
+	.rate_min = 8000,
+	.rate_max = 96000,
+	.channels_min = 1,
+	.channels_max = 8,
+	.buffer_bytes_max = 262144,
+	.period_bytes_min = 32,
+	.period_bytes_max = 131072,
+	.periods_min = 2,
+	.periods_max = 220,
+	/* One page (4k) contains 512 instructions. I don't know if the hw
+	supports lists longer than this. In this case periods_max=220 is a
+	safe limit to make sure the list never exceeds 512 instructions. */
+};
+
+
+#include "darla24_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio.c"
diff --git a/sound/pci/echoaudio/darla24_dsp.c b/sound/pci/echoaudio/darla24_dsp.c
new file mode 100644
index 000000000..8736b5e81
--- /dev/null
+++ b/sound/pci/echoaudio/darla24_dsp.c
@@ -0,0 +1,163 @@
+/***************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+   *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+	int err;
+
+	if (snd_BUG_ON((subdevice_id & 0xfff0) != DARLA24))
+		return -ENODEV;
+
+	if ((err = init_dsp_comm_page(chip))) {
+		dev_err(chip->card->dev,
+			"init_hw: could not initialize DSP comm page\n");
+		return err;
+	}
+
+	chip->device_id = device_id;
+	chip->subdevice_id = subdevice_id;
+	chip->bad_board = true;
+	chip->dsp_code_to_load = FW_DARLA24_DSP;
+	/* Since this card has no ASIC, mark it as loaded so everything
+	   works OK */
+	chip->asic_loaded = true;
+	chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL |
+		ECHO_CLOCK_BIT_ESYNC;
+
+	if ((err = load_firmware(chip)) < 0)
+		return err;
+	chip->bad_board = false;
+
+	return err;
+}
+
+
+
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+	return init_line_levels(chip);
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+	u32 clocks_from_dsp, clock_bits;
+
+	/* Map the DSP clock detect bits to the generic driver clock
+	   detect bits */
+	clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+	clock_bits = ECHO_CLOCK_BIT_INTERNAL;
+
+	if (clocks_from_dsp & GLDM_CLOCK_DETECT_BIT_ESYNC)
+		clock_bits |= ECHO_CLOCK_BIT_ESYNC;
+
+	return clock_bits;
+}
+
+
+
+/* The Darla24 has no ASIC. Just do nothing */
+static int load_asic(struct echoaudio *chip)
+{
+	return 0;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+	u8 clock;
+
+	switch (rate) {
+	case 96000:
+		clock = GD24_96000;
+		break;
+	case 88200:
+		clock = GD24_88200;
+		break;
+	case 48000:
+		clock = GD24_48000;
+		break;
+	case 44100:
+		clock = GD24_44100;
+		break;
+	case 32000:
+		clock = GD24_32000;
+		break;
+	case 22050:
+		clock = GD24_22050;
+		break;
+	case 16000:
+		clock = GD24_16000;
+		break;
+	case 11025:
+		clock = GD24_11025;
+		break;
+	case 8000:
+		clock = GD24_8000;
+		break;
+	default:
+		dev_err(chip->card->dev,
+			"set_sample_rate: Error, invalid sample rate %d\n",
+			rate);
+		return -EINVAL;
+	}
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	dev_dbg(chip->card->dev,
+		"set_sample_rate: %d clock %d\n", rate, clock);
+	chip->sample_rate = rate;
+
+	/* Override the sample rate if this card is set to Echo sync. */
+	if (chip->input_clock == ECHO_CLOCK_ESYNC)
+		clock = GD24_EXT_SYNC;
+
+	chip->comm_page->sample_rate = cpu_to_le32(rate);	/* ignored by the DSP ? */
+	chip->comm_page->gd_clock_state = clock;
+	clear_handshake(chip);
+	return send_vector(chip, DSP_VC_SET_GD_AUDIO_STATE);
+}
+
+
+
+static int set_input_clock(struct echoaudio *chip, u16 clock)
+{
+	if (snd_BUG_ON(clock != ECHO_CLOCK_INTERNAL &&
+		       clock != ECHO_CLOCK_ESYNC))
+		return -EINVAL;
+	chip->input_clock = clock;
+	return set_sample_rate(chip, chip->sample_rate);
+}
+
diff --git a/sound/pci/echoaudio/echo3g.c b/sound/pci/echoaudio/echo3g.c
new file mode 100644
index 000000000..3d37bb403
--- /dev/null
+++ b/sound/pci/echoaudio/echo3g.c
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  ALSA driver for Echoaudio soundcards.
+ *  Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ */
+
+#define ECHO3G_FAMILY
+#define ECHOCARD_ECHO3G
+#define ECHOCARD_NAME "Echo3G"
+#define ECHOCARD_HAS_MONITOR
+#define ECHOCARD_HAS_ASIC
+#define ECHOCARD_HAS_INPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_SUPER_INTERLEAVE
+#define ECHOCARD_HAS_DIGITAL_IO
+#define ECHOCARD_HAS_DIGITAL_MODE_SWITCH
+#define ECHOCARD_HAS_ADAT	6
+#define ECHOCARD_HAS_EXTERNAL_CLOCK
+#define ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+#define ECHOCARD_HAS_MIDI
+#define ECHOCARD_HAS_PHANTOM_POWER
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT	0
+#define PX_DIGITAL_OUT	chip->px_digital_out
+#define PX_ANALOG_IN	chip->px_analog_in
+#define PX_DIGITAL_IN	chip->px_digital_in
+#define PX_NUM		chip->px_num
+
+/* Bus indexes */
+#define BX_ANALOG_OUT	0
+#define BX_DIGITAL_OUT	chip->bx_digital_out
+#define BX_ANALOG_IN	chip->bx_analog_in
+#define BX_DIGITAL_IN	chip->bx_digital_in
+#define BX_NUM		chip->bx_num
+
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/tlv.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <sound/rawmidi.h>
+#include <linux/atomic.h>
+#include "echoaudio.h"
+
+MODULE_FIRMWARE("ea/loader_dsp.fw");
+MODULE_FIRMWARE("ea/echo3g_dsp.fw");
+MODULE_FIRMWARE("ea/3g_asic.fw");
+
+#define FW_361_LOADER	0
+#define FW_ECHO3G_DSP	1
+#define FW_3G_ASIC	2
+
+static const struct firmware card_fw[] = {
+	{0, "loader_dsp.fw"},
+	{0, "echo3g_dsp.fw"},
+	{0, "3g_asic.fw"}
+};
+
+static const struct pci_device_id snd_echo_ids[] = {
+	{0x1057, 0x3410, 0xECC0, 0x0100, 0, 0, 0},	/* Echo 3G */
+	{0,}
+};
+
+static const struct snd_pcm_hardware pcm_hardware_skel = {
+	.info = SNDRV_PCM_INFO_MMAP |
+		SNDRV_PCM_INFO_INTERLEAVED |
+		SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_PAUSE |
+		SNDRV_PCM_INFO_SYNC_START,
+	.formats =	SNDRV_PCM_FMTBIT_U8 |
+			SNDRV_PCM_FMTBIT_S16_LE |
+			SNDRV_PCM_FMTBIT_S24_3LE |
+			SNDRV_PCM_FMTBIT_S32_LE |
+			SNDRV_PCM_FMTBIT_S32_BE,
+	.rates = 	SNDRV_PCM_RATE_32000 |
+			SNDRV_PCM_RATE_44100 |
+			SNDRV_PCM_RATE_48000 |
+			SNDRV_PCM_RATE_88200 |
+			SNDRV_PCM_RATE_96000 |
+			SNDRV_PCM_RATE_CONTINUOUS,
+	.rate_min = 32000,
+	.rate_max = 100000,
+	.channels_min = 1,
+	.channels_max = 8,
+	.buffer_bytes_max = 262144,
+	.period_bytes_min = 32,
+	.period_bytes_max = 131072,
+	.periods_min = 2,
+	.periods_max = 220,
+};
+
+#include "echo3g_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio_3g.c"
+#include "echoaudio.c"
+#include "midi.c"
diff --git a/sound/pci/echoaudio/echo3g_dsp.c b/sound/pci/echoaudio/echo3g_dsp.c
new file mode 100644
index 000000000..6deb80c42
--- /dev/null
+++ b/sound/pci/echoaudio/echo3g_dsp.c
@@ -0,0 +1,131 @@
+/****************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+   *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+static int load_asic(struct echoaudio *chip);
+static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode);
+static int set_digital_mode(struct echoaudio *chip, u8 mode);
+static int check_asic_status(struct echoaudio *chip);
+static int set_sample_rate(struct echoaudio *chip, u32 rate);
+static int set_input_clock(struct echoaudio *chip, u16 clock);
+static int set_professional_spdif(struct echoaudio *chip, char prof);
+static int set_phantom_power(struct echoaudio *chip, char on);
+static int write_control_reg(struct echoaudio *chip, u32 ctl, u32 frq,
+			     char force);
+
+#include <linux/interrupt.h>
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+	int err;
+
+	local_irq_enable();
+	if (snd_BUG_ON((subdevice_id & 0xfff0) != ECHO3G))
+		return -ENODEV;
+
+	if ((err = init_dsp_comm_page(chip))) {
+		dev_err(chip->card->dev,
+			"init_hw - could not initialize DSP comm page\n");
+		return err;
+	}
+
+	chip->comm_page->e3g_frq_register =
+		cpu_to_le32((E3G_MAGIC_NUMBER / 48000) - 2);
+	chip->device_id = device_id;
+	chip->subdevice_id = subdevice_id;
+	chip->bad_board = true;
+	chip->has_midi = true;
+	chip->dsp_code_to_load = FW_ECHO3G_DSP;
+
+	/* Load the DSP code and the ASIC on the PCI card and get
+	what type of external box is attached */
+	err = load_firmware(chip);
+
+	if (err < 0) {
+		return err;
+	} else if (err == E3G_GINA3G_BOX_TYPE) {
+		chip->input_clock_types =	ECHO_CLOCK_BIT_INTERNAL |
+						ECHO_CLOCK_BIT_SPDIF |
+						ECHO_CLOCK_BIT_ADAT;
+		chip->card_name = "Gina3G";
+		chip->px_digital_out = chip->bx_digital_out = 6;
+		chip->px_analog_in = chip->bx_analog_in = 14;
+		chip->px_digital_in = chip->bx_digital_in = 16;
+		chip->px_num = chip->bx_num = 24;
+		chip->has_phantom_power = true;
+		chip->hasnt_input_nominal_level = true;
+	} else if (err == E3G_LAYLA3G_BOX_TYPE) {
+		chip->input_clock_types =	ECHO_CLOCK_BIT_INTERNAL |
+						ECHO_CLOCK_BIT_SPDIF |
+						ECHO_CLOCK_BIT_ADAT |
+						ECHO_CLOCK_BIT_WORD;
+		chip->card_name = "Layla3G";
+		chip->px_digital_out = chip->bx_digital_out = 8;
+		chip->px_analog_in = chip->bx_analog_in = 16;
+		chip->px_digital_in = chip->bx_digital_in = 24;
+		chip->px_num = chip->bx_num = 32;
+	} else {
+		return -ENODEV;
+	}
+
+	chip->digital_modes =	ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA |
+				ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL |
+				ECHOCAPS_HAS_DIGITAL_MODE_ADAT;
+
+	return err;
+}
+
+
+
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+	chip->digital_mode = DIGITAL_MODE_SPDIF_RCA;
+	chip->professional_spdif = false;
+	chip->non_audio_spdif = false;
+	chip->bad_board = false;
+	chip->phantom_power = false;
+	return init_line_levels(chip);
+}
+
+
+
+static int set_phantom_power(struct echoaudio *chip, char on)
+{
+	u32 control_reg = le32_to_cpu(chip->comm_page->control_register);
+
+	if (on)
+		control_reg |= E3G_PHANTOM_POWER;
+	else
+		control_reg &= ~E3G_PHANTOM_POWER;
+
+	chip->phantom_power = on;
+	return write_control_reg(chip, control_reg,
+				 le32_to_cpu(chip->comm_page->e3g_frq_register),
+				 0);
+}
diff --git a/sound/pci/echoaudio/echoaudio.c b/sound/pci/echoaudio/echoaudio.c
new file mode 100644
index 000000000..a20b2bb5c
--- /dev/null
+++ b/sound/pci/echoaudio/echoaudio.c
@@ -0,0 +1,2290 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  ALSA driver for Echoaudio soundcards.
+ *  Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ *  Copyright (C) 2020 Mark Hills <mark@xwax.org>
+ */
+
+#include <linux/module.h>
+
+MODULE_AUTHOR("Giuliano Pochini <pochini@shiny.it>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Echoaudio " ECHOCARD_NAME " soundcards driver");
+MODULE_SUPPORTED_DEVICE("{{Echoaudio," ECHOCARD_NAME "}}");
+MODULE_DEVICE_TABLE(pci, snd_echo_ids);
+
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
+static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
+static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
+
+module_param_array(index, int, NULL, 0444);
+MODULE_PARM_DESC(index, "Index value for " ECHOCARD_NAME " soundcard.");
+module_param_array(id, charp, NULL, 0444);
+MODULE_PARM_DESC(id, "ID string for " ECHOCARD_NAME " soundcard.");
+module_param_array(enable, bool, NULL, 0444);
+MODULE_PARM_DESC(enable, "Enable " ECHOCARD_NAME " soundcard.");
+
+static const unsigned int channels_list[10] = {1, 2, 4, 6, 8, 10, 12, 14, 16, 999999};
+static const DECLARE_TLV_DB_SCALE(db_scale_output_gain, -12800, 100, 1);
+
+
+
+static int get_firmware(const struct firmware **fw_entry,
+			struct echoaudio *chip, const short fw_index)
+{
+	int err;
+	char name[30];
+
+#ifdef CONFIG_PM_SLEEP
+	if (chip->fw_cache[fw_index]) {
+		dev_dbg(chip->card->dev,
+			"firmware requested: %s is cached\n",
+			card_fw[fw_index].data);
+		*fw_entry = chip->fw_cache[fw_index];
+		return 0;
+	}
+#endif
+
+	dev_dbg(chip->card->dev,
+		"firmware requested: %s\n", card_fw[fw_index].data);
+	snprintf(name, sizeof(name), "ea/%s", card_fw[fw_index].data);
+	err = request_firmware(fw_entry, name, &chip->pci->dev);
+	if (err < 0)
+		dev_err(chip->card->dev,
+			"get_firmware(): Firmware not available (%d)\n", err);
+#ifdef CONFIG_PM_SLEEP
+	else
+		chip->fw_cache[fw_index] = *fw_entry;
+#endif
+	return err;
+}
+
+
+
+static void free_firmware(const struct firmware *fw_entry,
+			  struct echoaudio *chip)
+{
+#ifdef CONFIG_PM_SLEEP
+	dev_dbg(chip->card->dev, "firmware not released (kept in cache)\n");
+#else
+	release_firmware(fw_entry);
+#endif
+}
+
+
+
+static void free_firmware_cache(struct echoaudio *chip)
+{
+#ifdef CONFIG_PM_SLEEP
+	int i;
+
+	for (i = 0; i < 8 ; i++)
+		if (chip->fw_cache[i]) {
+			release_firmware(chip->fw_cache[i]);
+			dev_dbg(chip->card->dev, "release_firmware(%d)\n", i);
+		}
+
+#endif
+}
+
+
+
+/******************************************************************************
+	PCM interface
+******************************************************************************/
+
+static void audiopipe_free(struct snd_pcm_runtime *runtime)
+{
+	struct audiopipe *pipe = runtime->private_data;
+
+	if (pipe->sgpage.area)
+		snd_dma_free_pages(&pipe->sgpage);
+	kfree(pipe);
+}
+
+
+
+static int hw_rule_capture_format_by_channels(struct snd_pcm_hw_params *params,
+					      struct snd_pcm_hw_rule *rule)
+{
+	struct snd_interval *c = hw_param_interval(params,
+						   SNDRV_PCM_HW_PARAM_CHANNELS);
+	struct snd_mask *f = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
+	struct snd_mask fmt;
+
+	snd_mask_any(&fmt);
+
+#ifndef ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+	/* >=2 channels cannot be S32_BE */
+	if (c->min == 2) {
+		fmt.bits[0] &= ~SNDRV_PCM_FMTBIT_S32_BE;
+		return snd_mask_refine(f, &fmt);
+	}
+#endif
+	/* > 2 channels cannot be U8 and S32_BE */
+	if (c->min > 2) {
+		fmt.bits[0] &= ~(SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S32_BE);
+		return snd_mask_refine(f, &fmt);
+	}
+	/* Mono is ok with any format */
+	return 0;
+}
+
+
+
+static int hw_rule_capture_channels_by_format(struct snd_pcm_hw_params *params,
+					      struct snd_pcm_hw_rule *rule)
+{
+	struct snd_interval *c = hw_param_interval(params,
+						   SNDRV_PCM_HW_PARAM_CHANNELS);
+	struct snd_mask *f = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
+	struct snd_interval ch;
+
+	snd_interval_any(&ch);
+
+	/* S32_BE is mono (and stereo) only */
+	if (f->bits[0] == SNDRV_PCM_FMTBIT_S32_BE) {
+		ch.min = 1;
+#ifdef ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+		ch.max = 2;
+#else
+		ch.max = 1;
+#endif
+		ch.integer = 1;
+		return snd_interval_refine(c, &ch);
+	}
+	/* U8 can be only mono or stereo */
+	if (f->bits[0] == SNDRV_PCM_FMTBIT_U8) {
+		ch.min = 1;
+		ch.max = 2;
+		ch.integer = 1;
+		return snd_interval_refine(c, &ch);
+	}
+	/* S16_LE, S24_3LE and S32_LE support any number of channels. */
+	return 0;
+}
+
+
+
+static int hw_rule_playback_format_by_channels(struct snd_pcm_hw_params *params,
+					       struct snd_pcm_hw_rule *rule)
+{
+	struct snd_interval *c = hw_param_interval(params,
+						   SNDRV_PCM_HW_PARAM_CHANNELS);
+	struct snd_mask *f = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
+	struct snd_mask fmt;
+	u64 fmask;
+	snd_mask_any(&fmt);
+
+	fmask = fmt.bits[0] + ((u64)fmt.bits[1] << 32);
+
+	/* >2 channels must be S16_LE, S24_3LE or S32_LE */
+	if (c->min > 2) {
+		fmask &= SNDRV_PCM_FMTBIT_S16_LE |
+			 SNDRV_PCM_FMTBIT_S24_3LE |
+			 SNDRV_PCM_FMTBIT_S32_LE;
+	/* 1 channel must be S32_BE or S32_LE */
+	} else if (c->max == 1)
+		fmask &= SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE;
+#ifndef ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+	/* 2 channels cannot be S32_BE */
+	else if (c->min == 2 && c->max == 2)
+		fmask &= ~SNDRV_PCM_FMTBIT_S32_BE;
+#endif
+	else
+		return 0;
+
+	fmt.bits[0] &= (u32)fmask;
+	fmt.bits[1] &= (u32)(fmask >> 32);
+	return snd_mask_refine(f, &fmt);
+}
+
+
+
+static int hw_rule_playback_channels_by_format(struct snd_pcm_hw_params *params,
+					       struct snd_pcm_hw_rule *rule)
+{
+	struct snd_interval *c = hw_param_interval(params,
+						   SNDRV_PCM_HW_PARAM_CHANNELS);
+	struct snd_mask *f = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
+	struct snd_interval ch;
+	u64 fmask;
+
+	snd_interval_any(&ch);
+	ch.integer = 1;
+	fmask = f->bits[0] + ((u64)f->bits[1] << 32);
+
+	/* S32_BE is mono (and stereo) only */
+	if (fmask == SNDRV_PCM_FMTBIT_S32_BE) {
+		ch.min = 1;
+#ifdef ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+		ch.max = 2;
+#else
+		ch.max = 1;
+#endif
+	/* U8 is stereo only */
+	} else if (fmask == SNDRV_PCM_FMTBIT_U8)
+		ch.min = ch.max = 2;
+	/* S16_LE and S24_3LE must be at least stereo */
+	else if (!(fmask & ~(SNDRV_PCM_FMTBIT_S16_LE |
+			       SNDRV_PCM_FMTBIT_S24_3LE)))
+		ch.min = 2;
+	else
+		return 0;
+
+	return snd_interval_refine(c, &ch);
+}
+
+
+
+/* Since the sample rate is a global setting, do allow the user to change the
+sample rate only if there is only one pcm device open. */
+static int hw_rule_sample_rate(struct snd_pcm_hw_params *params,
+			       struct snd_pcm_hw_rule *rule)
+{
+	struct snd_interval *rate = hw_param_interval(params,
+						      SNDRV_PCM_HW_PARAM_RATE);
+	struct echoaudio *chip = rule->private;
+	struct snd_interval fixed;
+	int err;
+
+	mutex_lock(&chip->mode_mutex);
+
+	if (chip->can_set_rate) {
+		err = 0;
+	} else {
+		snd_interval_any(&fixed);
+		fixed.min = fixed.max = chip->sample_rate;
+		err = snd_interval_refine(rate, &fixed);
+	}
+
+	mutex_unlock(&chip->mode_mutex);
+	return err;
+}
+
+
+static int pcm_open(struct snd_pcm_substream *substream,
+		    signed char max_channels)
+{
+	struct echoaudio *chip;
+	struct snd_pcm_runtime *runtime;
+	struct audiopipe *pipe;
+	int err, i;
+
+	if (max_channels <= 0)
+		return -EAGAIN;
+
+	chip = snd_pcm_substream_chip(substream);
+	runtime = substream->runtime;
+
+	pipe = kzalloc(sizeof(struct audiopipe), GFP_KERNEL);
+	if (!pipe)
+		return -ENOMEM;
+	pipe->index = -1;		/* Not configured yet */
+
+	/* Set up hw capabilities and contraints */
+	memcpy(&pipe->hw, &pcm_hardware_skel, sizeof(struct snd_pcm_hardware));
+	dev_dbg(chip->card->dev, "max_channels=%d\n", max_channels);
+	pipe->constr.list = channels_list;
+	pipe->constr.mask = 0;
+	for (i = 0; channels_list[i] <= max_channels; i++);
+	pipe->constr.count = i;
+	if (pipe->hw.channels_max > max_channels)
+		pipe->hw.channels_max = max_channels;
+	if (chip->digital_mode == DIGITAL_MODE_ADAT) {
+		pipe->hw.rate_max = 48000;
+		pipe->hw.rates &= SNDRV_PCM_RATE_8000_48000;
+	}
+
+	runtime->hw = pipe->hw;
+	runtime->private_data = pipe;
+	runtime->private_free = audiopipe_free;
+	snd_pcm_set_sync(substream);
+
+	/* Only mono and any even number of channels are allowed */
+	if ((err = snd_pcm_hw_constraint_list(runtime, 0,
+					      SNDRV_PCM_HW_PARAM_CHANNELS,
+					      &pipe->constr)) < 0)
+		return err;
+
+	/* All periods should have the same size */
+	if ((err = snd_pcm_hw_constraint_integer(runtime,
+						 SNDRV_PCM_HW_PARAM_PERIODS)) < 0)
+		return err;
+
+	/* The hw accesses memory in chunks 32 frames long and they should be
+	32-bytes-aligned. It's not a requirement, but it seems that IRQs are
+	generated with a resolution of 32 frames. Thus we need the following */
+	if ((err = snd_pcm_hw_constraint_step(runtime, 0,
+					      SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
+					      32)) < 0)
+		return err;
+	if ((err = snd_pcm_hw_constraint_step(runtime, 0,
+					      SNDRV_PCM_HW_PARAM_BUFFER_SIZE,
+					      32)) < 0)
+		return err;
+
+	if ((err = snd_pcm_hw_rule_add(substream->runtime, 0,
+				       SNDRV_PCM_HW_PARAM_RATE,
+					hw_rule_sample_rate, chip,
+				       SNDRV_PCM_HW_PARAM_RATE, -1)) < 0)
+		return err;
+
+	/* Allocate a page for the scatter-gather list */
+	if ((err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV,
+				       &chip->pci->dev,
+				       PAGE_SIZE, &pipe->sgpage)) < 0) {
+		dev_err(chip->card->dev, "s-g list allocation failed\n");
+		return err;
+	}
+
+	/*
+	 * Sole ownership required to set the rate
+	 */
+
+	dev_dbg(chip->card->dev, "pcm_open opencount=%d can_set_rate=%d, rate_set=%d",
+		chip->opencount, chip->can_set_rate, chip->rate_set);
+
+	chip->opencount++;
+	if (chip->opencount > 1 && chip->rate_set)
+		chip->can_set_rate = 0;
+
+	return 0;
+}
+
+
+
+static int pcm_analog_in_open(struct snd_pcm_substream *substream)
+{
+	struct echoaudio *chip = snd_pcm_substream_chip(substream);
+	int err;
+
+	if ((err = pcm_open(substream, num_analog_busses_in(chip) -
+			    substream->number)) < 0)
+		return err;
+	if ((err = snd_pcm_hw_rule_add(substream->runtime, 0,
+				       SNDRV_PCM_HW_PARAM_CHANNELS,
+				       hw_rule_capture_channels_by_format, NULL,
+				       SNDRV_PCM_HW_PARAM_FORMAT, -1)) < 0)
+		return err;
+	if ((err = snd_pcm_hw_rule_add(substream->runtime, 0,
+				       SNDRV_PCM_HW_PARAM_FORMAT,
+				       hw_rule_capture_format_by_channels, NULL,
+				       SNDRV_PCM_HW_PARAM_CHANNELS, -1)) < 0)
+		return err;
+
+	return 0;
+}
+
+
+
+static int pcm_analog_out_open(struct snd_pcm_substream *substream)
+{
+	struct echoaudio *chip = snd_pcm_substream_chip(substream);
+	int max_channels, err;
+
+#ifdef ECHOCARD_HAS_VMIXER
+	max_channels = num_pipes_out(chip);
+#else
+	max_channels = num_analog_busses_out(chip);
+#endif
+	if ((err = pcm_open(substream, max_channels - substream->number)) < 0)
+		return err;
+	if ((err = snd_pcm_hw_rule_add(substream->runtime, 0,
+				       SNDRV_PCM_HW_PARAM_CHANNELS,
+				       hw_rule_playback_channels_by_format,
+				       NULL,
+				       SNDRV_PCM_HW_PARAM_FORMAT, -1)) < 0)
+		return err;
+	if ((err = snd_pcm_hw_rule_add(substream->runtime, 0,
+				       SNDRV_PCM_HW_PARAM_FORMAT,
+				       hw_rule_playback_format_by_channels,
+				       NULL,
+				       SNDRV_PCM_HW_PARAM_CHANNELS, -1)) < 0)
+		return err;
+
+	return 0;
+}
+
+
+
+#ifdef ECHOCARD_HAS_DIGITAL_IO
+
+static int pcm_digital_in_open(struct snd_pcm_substream *substream)
+{
+	struct echoaudio *chip = snd_pcm_substream_chip(substream);
+	int err, max_channels;
+
+	max_channels = num_digital_busses_in(chip) - substream->number;
+	mutex_lock(&chip->mode_mutex);
+	if (chip->digital_mode == DIGITAL_MODE_ADAT)
+		err = pcm_open(substream, max_channels);
+	else	/* If the card has ADAT, subtract the 6 channels
+		 * that S/PDIF doesn't have
+		 */
+		err = pcm_open(substream, max_channels - ECHOCARD_HAS_ADAT);
+
+	if (err < 0)
+		goto din_exit;
+
+	if ((err = snd_pcm_hw_rule_add(substream->runtime, 0,
+				       SNDRV_PCM_HW_PARAM_CHANNELS,
+				       hw_rule_capture_channels_by_format, NULL,
+				       SNDRV_PCM_HW_PARAM_FORMAT, -1)) < 0)
+		goto din_exit;
+	if ((err = snd_pcm_hw_rule_add(substream->runtime, 0,
+				       SNDRV_PCM_HW_PARAM_FORMAT,
+				       hw_rule_capture_format_by_channels, NULL,
+				       SNDRV_PCM_HW_PARAM_CHANNELS, -1)) < 0)
+		goto din_exit;
+
+din_exit:
+	mutex_unlock(&chip->mode_mutex);
+	return err;
+}
+
+
+
+#ifndef ECHOCARD_HAS_VMIXER	/* See the note in snd_echo_new_pcm() */
+
+static int pcm_digital_out_open(struct snd_pcm_substream *substream)
+{
+	struct echoaudio *chip = snd_pcm_substream_chip(substream);
+	int err, max_channels;
+
+	max_channels = num_digital_busses_out(chip) - substream->number;
+	mutex_lock(&chip->mode_mutex);
+	if (chip->digital_mode == DIGITAL_MODE_ADAT)
+		err = pcm_open(substream, max_channels);
+	else	/* If the card has ADAT, subtract the 6 channels
+		 * that S/PDIF doesn't have
+		 */
+		err = pcm_open(substream, max_channels - ECHOCARD_HAS_ADAT);
+
+	if (err < 0)
+		goto dout_exit;
+
+	if ((err = snd_pcm_hw_rule_add(substream->runtime, 0,
+				       SNDRV_PCM_HW_PARAM_CHANNELS,
+				       hw_rule_playback_channels_by_format,
+				       NULL, SNDRV_PCM_HW_PARAM_FORMAT,
+				       -1)) < 0)
+		goto dout_exit;
+	if ((err = snd_pcm_hw_rule_add(substream->runtime, 0,
+				       SNDRV_PCM_HW_PARAM_FORMAT,
+				       hw_rule_playback_format_by_channels,
+				       NULL, SNDRV_PCM_HW_PARAM_CHANNELS,
+				       -1)) < 0)
+		goto dout_exit;
+
+dout_exit:
+	mutex_unlock(&chip->mode_mutex);
+	return err;
+}
+
+#endif /* !ECHOCARD_HAS_VMIXER */
+
+#endif /* ECHOCARD_HAS_DIGITAL_IO */
+
+
+
+static int pcm_close(struct snd_pcm_substream *substream)
+{
+	struct echoaudio *chip = snd_pcm_substream_chip(substream);
+
+	/* Nothing to do here. Audio is already off and pipe will be
+	 * freed by its callback
+	 */
+
+	mutex_lock(&chip->mode_mutex);
+
+	dev_dbg(chip->card->dev, "pcm_open opencount=%d can_set_rate=%d, rate_set=%d",
+		chip->opencount, chip->can_set_rate, chip->rate_set);
+
+	chip->opencount--;
+
+	switch (chip->opencount) {
+	case 1:
+		chip->can_set_rate = 1;
+		break;
+
+	case 0:
+		chip->rate_set = 0;
+		break;
+	}
+
+	mutex_unlock(&chip->mode_mutex);
+	return 0;
+}
+
+
+
+/* Channel allocation and scatter-gather list setup */
+static int init_engine(struct snd_pcm_substream *substream,
+		       struct snd_pcm_hw_params *hw_params,
+		       int pipe_index, int interleave)
+{
+	struct echoaudio *chip;
+	int err, per, rest, page, edge, offs;
+	struct audiopipe *pipe;
+
+	chip = snd_pcm_substream_chip(substream);
+	pipe = (struct audiopipe *) substream->runtime->private_data;
+
+	/* Sets up che hardware. If it's already initialized, reset and
+	 * redo with the new parameters
+	 */
+	spin_lock_irq(&chip->lock);
+	if (pipe->index >= 0) {
+		dev_dbg(chip->card->dev, "hwp_ie free(%d)\n", pipe->index);
+		err = free_pipes(chip, pipe);
+		snd_BUG_ON(err);
+		chip->substream[pipe->index] = NULL;
+	}
+
+	err = allocate_pipes(chip, pipe, pipe_index, interleave);
+	if (err < 0) {
+		spin_unlock_irq(&chip->lock);
+		dev_err(chip->card->dev, "allocate_pipes(%d) err=%d\n",
+			pipe_index, err);
+		return err;
+	}
+	spin_unlock_irq(&chip->lock);
+	dev_dbg(chip->card->dev, "allocate_pipes()=%d\n", pipe_index);
+
+	dev_dbg(chip->card->dev,
+		"pcm_hw_params (bufsize=%dB periods=%d persize=%dB)\n",
+		params_buffer_bytes(hw_params), params_periods(hw_params),
+		params_period_bytes(hw_params));
+
+	sglist_init(chip, pipe);
+	edge = PAGE_SIZE;
+	for (offs = page = per = 0; offs < params_buffer_bytes(hw_params);
+	     per++) {
+		rest = params_period_bytes(hw_params);
+		if (offs + rest > params_buffer_bytes(hw_params))
+			rest = params_buffer_bytes(hw_params) - offs;
+		while (rest) {
+			dma_addr_t addr;
+			addr = snd_pcm_sgbuf_get_addr(substream, offs);
+			if (rest <= edge - offs) {
+				sglist_add_mapping(chip, pipe, addr, rest);
+				sglist_add_irq(chip, pipe);
+				offs += rest;
+				rest = 0;
+			} else {
+				sglist_add_mapping(chip, pipe, addr,
+						   edge - offs);
+				rest -= edge - offs;
+				offs = edge;
+			}
+			if (offs == edge) {
+				edge += PAGE_SIZE;
+				page++;
+			}
+		}
+	}
+
+	/* Close the ring buffer */
+	sglist_wrap(chip, pipe);
+
+	/* This stuff is used by the irq handler, so it must be
+	 * initialized before chip->substream
+	 */
+	pipe->last_period = 0;
+	pipe->last_counter = 0;
+	pipe->position = 0;
+	smp_wmb();
+	chip->substream[pipe_index] = substream;
+	chip->rate_set = 1;
+	spin_lock_irq(&chip->lock);
+	set_sample_rate(chip, hw_params->rate_num / hw_params->rate_den);
+	spin_unlock_irq(&chip->lock);
+	return 0;
+}
+
+
+
+static int pcm_analog_in_hw_params(struct snd_pcm_substream *substream,
+				   struct snd_pcm_hw_params *hw_params)
+{
+	struct echoaudio *chip = snd_pcm_substream_chip(substream);
+
+	return init_engine(substream, hw_params, px_analog_in(chip) +
+			substream->number, params_channels(hw_params));
+}
+
+
+
+static int pcm_analog_out_hw_params(struct snd_pcm_substream *substream,
+				    struct snd_pcm_hw_params *hw_params)
+{
+	return init_engine(substream, hw_params, substream->number,
+			   params_channels(hw_params));
+}
+
+
+
+#ifdef ECHOCARD_HAS_DIGITAL_IO
+
+static int pcm_digital_in_hw_params(struct snd_pcm_substream *substream,
+				    struct snd_pcm_hw_params *hw_params)
+{
+	struct echoaudio *chip = snd_pcm_substream_chip(substream);
+
+	return init_engine(substream, hw_params, px_digital_in(chip) +
+			substream->number, params_channels(hw_params));
+}
+
+
+
+#ifndef ECHOCARD_HAS_VMIXER	/* See the note in snd_echo_new_pcm() */
+static int pcm_digital_out_hw_params(struct snd_pcm_substream *substream,
+				     struct snd_pcm_hw_params *hw_params)
+{
+	struct echoaudio *chip = snd_pcm_substream_chip(substream);
+
+	return init_engine(substream, hw_params, px_digital_out(chip) +
+			substream->number, params_channels(hw_params));
+}
+#endif /* !ECHOCARD_HAS_VMIXER */
+
+#endif /* ECHOCARD_HAS_DIGITAL_IO */
+
+
+
+static int pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	struct echoaudio *chip;
+	struct audiopipe *pipe;
+
+	chip = snd_pcm_substream_chip(substream);
+	pipe = (struct audiopipe *) substream->runtime->private_data;
+
+	spin_lock_irq(&chip->lock);
+	if (pipe->index >= 0) {
+		dev_dbg(chip->card->dev, "pcm_hw_free(%d)\n", pipe->index);
+		free_pipes(chip, pipe);
+		chip->substream[pipe->index] = NULL;
+		pipe->index = -1;
+	}
+	spin_unlock_irq(&chip->lock);
+
+	return 0;
+}
+
+
+
+static int pcm_prepare(struct snd_pcm_substream *substream)
+{
+	struct echoaudio *chip = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct audioformat format;
+	int pipe_index = ((struct audiopipe *)runtime->private_data)->index;
+
+	dev_dbg(chip->card->dev, "Prepare rate=%d format=%d channels=%d\n",
+		runtime->rate, runtime->format, runtime->channels);
+	format.interleave = runtime->channels;
+	format.data_are_bigendian = 0;
+	format.mono_to_stereo = 0;
+	switch (runtime->format) {
+	case SNDRV_PCM_FORMAT_U8:
+		format.bits_per_sample = 8;
+		break;
+	case SNDRV_PCM_FORMAT_S16_LE:
+		format.bits_per_sample = 16;
+		break;
+	case SNDRV_PCM_FORMAT_S24_3LE:
+		format.bits_per_sample = 24;
+		break;
+	case SNDRV_PCM_FORMAT_S32_BE:
+		format.data_are_bigendian = 1;
+		fallthrough;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		format.bits_per_sample = 32;
+		break;
+	default:
+		dev_err(chip->card->dev,
+			"Prepare error: unsupported format %d\n",
+			runtime->format);
+		return -EINVAL;
+	}
+
+	if (snd_BUG_ON(pipe_index >= px_num(chip)))
+		return -EINVAL;
+
+	/*
+	 * We passed checks we can do independently; now take
+	 * exclusive control
+	 */
+
+	spin_lock_irq(&chip->lock);
+
+	if (snd_BUG_ON(!is_pipe_allocated(chip, pipe_index))) {
+		spin_unlock_irq(&chip->lock);
+		return -EINVAL;
+	}
+
+	set_audio_format(chip, pipe_index, &format);
+	spin_unlock_irq(&chip->lock);
+
+	return 0;
+}
+
+
+
+static int pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct echoaudio *chip = snd_pcm_substream_chip(substream);
+	struct audiopipe *pipe;
+	int i, err;
+	u32 channelmask = 0;
+	struct snd_pcm_substream *s;
+
+	snd_pcm_group_for_each_entry(s, substream) {
+		for (i = 0; i < DSP_MAXPIPES; i++) {
+			if (s == chip->substream[i]) {
+				channelmask |= 1 << i;
+				snd_pcm_trigger_done(s, substream);
+			}
+		}
+	}
+
+	spin_lock(&chip->lock);
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		for (i = 0; i < DSP_MAXPIPES; i++) {
+			if (channelmask & (1 << i)) {
+				pipe = chip->substream[i]->runtime->private_data;
+				switch (pipe->state) {
+				case PIPE_STATE_STOPPED:
+					pipe->last_period = 0;
+					pipe->last_counter = 0;
+					pipe->position = 0;
+					*pipe->dma_counter = 0;
+					fallthrough;
+				case PIPE_STATE_PAUSED:
+					pipe->state = PIPE_STATE_STARTED;
+					break;
+				case PIPE_STATE_STARTED:
+					break;
+				}
+			}
+		}
+		err = start_transport(chip, channelmask,
+				      chip->pipe_cyclic_mask);
+		break;
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_STOP:
+		for (i = 0; i < DSP_MAXPIPES; i++) {
+			if (channelmask & (1 << i)) {
+				pipe = chip->substream[i]->runtime->private_data;
+				pipe->state = PIPE_STATE_STOPPED;
+			}
+		}
+		err = stop_transport(chip, channelmask);
+		break;
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		for (i = 0; i < DSP_MAXPIPES; i++) {
+			if (channelmask & (1 << i)) {
+				pipe = chip->substream[i]->runtime->private_data;
+				pipe->state = PIPE_STATE_PAUSED;
+			}
+		}
+		err = pause_transport(chip, channelmask);
+		break;
+	default:
+		err = -EINVAL;
+	}
+	spin_unlock(&chip->lock);
+	return err;
+}
+
+
+
+static snd_pcm_uframes_t pcm_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct audiopipe *pipe = runtime->private_data;
+	u32 counter, step;
+
+	/*
+	 * IRQ handling runs concurrently. Do not share tracking of
+	 * counter with it, which would race or require locking
+	 */
+
+	counter = le32_to_cpu(*pipe->dma_counter);  /* presumed atomic */
+
+	step = counter - pipe->last_counter;  /* handles wrapping */
+	pipe->last_counter = counter;
+
+	/* counter doesn't neccessarily wrap on a multiple of
+	 * buffer_size, so can't derive the position; must
+	 * accumulate */
+
+	pipe->position += step;
+	pipe->position %= frames_to_bytes(runtime, runtime->buffer_size); /* wrap */
+
+	return bytes_to_frames(runtime, pipe->position);
+}
+
+
+
+/* pcm *_ops structures */
+static const struct snd_pcm_ops analog_playback_ops = {
+	.open = pcm_analog_out_open,
+	.close = pcm_close,
+	.hw_params = pcm_analog_out_hw_params,
+	.hw_free = pcm_hw_free,
+	.prepare = pcm_prepare,
+	.trigger = pcm_trigger,
+	.pointer = pcm_pointer,
+};
+static const struct snd_pcm_ops analog_capture_ops = {
+	.open = pcm_analog_in_open,
+	.close = pcm_close,
+	.hw_params = pcm_analog_in_hw_params,
+	.hw_free = pcm_hw_free,
+	.prepare = pcm_prepare,
+	.trigger = pcm_trigger,
+	.pointer = pcm_pointer,
+};
+#ifdef ECHOCARD_HAS_DIGITAL_IO
+#ifndef ECHOCARD_HAS_VMIXER
+static const struct snd_pcm_ops digital_playback_ops = {
+	.open = pcm_digital_out_open,
+	.close = pcm_close,
+	.hw_params = pcm_digital_out_hw_params,
+	.hw_free = pcm_hw_free,
+	.prepare = pcm_prepare,
+	.trigger = pcm_trigger,
+	.pointer = pcm_pointer,
+};
+#endif /* !ECHOCARD_HAS_VMIXER */
+static const struct snd_pcm_ops digital_capture_ops = {
+	.open = pcm_digital_in_open,
+	.close = pcm_close,
+	.hw_params = pcm_digital_in_hw_params,
+	.hw_free = pcm_hw_free,
+	.prepare = pcm_prepare,
+	.trigger = pcm_trigger,
+	.pointer = pcm_pointer,
+};
+#endif /* ECHOCARD_HAS_DIGITAL_IO */
+
+
+
+/* Preallocate memory only for the first substream because it's the most
+ * used one
+ */
+static void snd_echo_preallocate_pages(struct snd_pcm *pcm, struct device *dev)
+{
+	struct snd_pcm_substream *ss;
+	int stream;
+
+	for (stream = 0; stream < 2; stream++)
+		for (ss = pcm->streams[stream].substream; ss; ss = ss->next)
+			snd_pcm_set_managed_buffer(ss, SNDRV_DMA_TYPE_DEV_SG,
+						   dev,
+						   ss->number ? 0 : 128<<10,
+						   256<<10);
+}
+
+
+
+/*<--snd_echo_probe() */
+static int snd_echo_new_pcm(struct echoaudio *chip)
+{
+	struct snd_pcm *pcm;
+	int err;
+
+#ifdef ECHOCARD_HAS_VMIXER
+	/* This card has a Vmixer, that is there is no direct mapping from PCM
+	streams to physical outputs. The user can mix the streams as he wishes
+	via control interface and it's possible to send any stream to any
+	output, thus it makes no sense to keep analog and digital outputs
+	separated */
+
+	/* PCM#0 Virtual outputs and analog inputs */
+	if ((err = snd_pcm_new(chip->card, "PCM", 0, num_pipes_out(chip),
+				num_analog_busses_in(chip), &pcm)) < 0)
+		return err;
+	pcm->private_data = chip;
+	chip->analog_pcm = pcm;
+	strcpy(pcm->name, chip->card->shortname);
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &analog_playback_ops);
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &analog_capture_ops);
+	snd_echo_preallocate_pages(pcm, &chip->pci->dev);
+
+#ifdef ECHOCARD_HAS_DIGITAL_IO
+	/* PCM#1 Digital inputs, no outputs */
+	if ((err = snd_pcm_new(chip->card, "Digital PCM", 1, 0,
+			       num_digital_busses_in(chip), &pcm)) < 0)
+		return err;
+	pcm->private_data = chip;
+	chip->digital_pcm = pcm;
+	strcpy(pcm->name, chip->card->shortname);
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &digital_capture_ops);
+	snd_echo_preallocate_pages(pcm, &chip->pci->dev);
+#endif /* ECHOCARD_HAS_DIGITAL_IO */
+
+#else /* ECHOCARD_HAS_VMIXER */
+
+	/* The card can manage substreams formed by analog and digital channels
+	at the same time, but I prefer to keep analog and digital channels
+	separated, because that mixed thing is confusing and useless. So we
+	register two PCM devices: */
+
+	/* PCM#0 Analog i/o */
+	if ((err = snd_pcm_new(chip->card, "Analog PCM", 0,
+			       num_analog_busses_out(chip),
+			       num_analog_busses_in(chip), &pcm)) < 0)
+		return err;
+	pcm->private_data = chip;
+	chip->analog_pcm = pcm;
+	strcpy(pcm->name, chip->card->shortname);
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &analog_playback_ops);
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &analog_capture_ops);
+	snd_echo_preallocate_pages(pcm, &chip->pci->dev);
+
+#ifdef ECHOCARD_HAS_DIGITAL_IO
+	/* PCM#1 Digital i/o */
+	if ((err = snd_pcm_new(chip->card, "Digital PCM", 1,
+			       num_digital_busses_out(chip),
+			       num_digital_busses_in(chip), &pcm)) < 0)
+		return err;
+	pcm->private_data = chip;
+	chip->digital_pcm = pcm;
+	strcpy(pcm->name, chip->card->shortname);
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &digital_playback_ops);
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &digital_capture_ops);
+	snd_echo_preallocate_pages(pcm, &chip->pci->dev);
+#endif /* ECHOCARD_HAS_DIGITAL_IO */
+
+#endif /* ECHOCARD_HAS_VMIXER */
+
+	return 0;
+}
+
+
+
+
+/******************************************************************************
+	Control interface
+******************************************************************************/
+
+#if !defined(ECHOCARD_HAS_VMIXER) || defined(ECHOCARD_HAS_LINE_OUT_GAIN)
+
+/******************* PCM output volume *******************/
+static int snd_echo_output_gain_info(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_info *uinfo)
+{
+	struct echoaudio *chip;
+
+	chip = snd_kcontrol_chip(kcontrol);
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = num_busses_out(chip);
+	uinfo->value.integer.min = ECHOGAIN_MINOUT;
+	uinfo->value.integer.max = ECHOGAIN_MAXOUT;
+	return 0;
+}
+
+static int snd_echo_output_gain_get(struct snd_kcontrol *kcontrol,
+				    struct snd_ctl_elem_value *ucontrol)
+{
+	struct echoaudio *chip;
+	int c;
+
+	chip = snd_kcontrol_chip(kcontrol);
+	for (c = 0; c < num_busses_out(chip); c++)
+		ucontrol->value.integer.value[c] = chip->output_gain[c];
+	return 0;
+}
+
+static int snd_echo_output_gain_put(struct snd_kcontrol *kcontrol,
+				    struct snd_ctl_elem_value *ucontrol)
+{
+	struct echoaudio *chip;
+	int c, changed, gain;
+
+	changed = 0;
+	chip = snd_kcontrol_chip(kcontrol);
+	spin_lock_irq(&chip->lock);
+	for (c = 0; c < num_busses_out(chip); c++) {
+		gain = ucontrol->value.integer.value[c];
+		/* Ignore out of range values */
+		if (gain < ECHOGAIN_MINOUT || gain > ECHOGAIN_MAXOUT)
+			continue;
+		if (chip->output_gain[c] != gain) {
+			set_output_gain(chip, c, gain);
+			changed = 1;
+		}
+	}
+	if (changed)
+		update_output_line_level(chip);
+	spin_unlock_irq(&chip->lock);
+	return changed;
+}
+
+#ifdef ECHOCARD_HAS_LINE_OUT_GAIN
+/* On the Mia this one controls the line-out volume */
+static const struct snd_kcontrol_new snd_echo_line_output_gain = {
+	.name = "Line Playback Volume",
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+		  SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+	.info = snd_echo_output_gain_info,
+	.get = snd_echo_output_gain_get,
+	.put = snd_echo_output_gain_put,
+	.tlv = {.p = db_scale_output_gain},
+};
+#else
+static const struct snd_kcontrol_new snd_echo_pcm_output_gain = {
+	.name = "PCM Playback Volume",
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+	.info = snd_echo_output_gain_info,
+	.get = snd_echo_output_gain_get,
+	.put = snd_echo_output_gain_put,
+	.tlv = {.p = db_scale_output_gain},
+};
+#endif
+
+#endif /* !ECHOCARD_HAS_VMIXER || ECHOCARD_HAS_LINE_OUT_GAIN */
+
+
+
+#ifdef ECHOCARD_HAS_INPUT_GAIN
+
+/******************* Analog input volume *******************/
+static int snd_echo_input_gain_info(struct snd_kcontrol *kcontrol,
+				    struct snd_ctl_elem_info *uinfo)
+{
+	struct echoaudio *chip;
+
+	chip = snd_kcontrol_chip(kcontrol);
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = num_analog_busses_in(chip);
+	uinfo->value.integer.min = ECHOGAIN_MININP;
+	uinfo->value.integer.max = ECHOGAIN_MAXINP;
+	return 0;
+}
+
+static int snd_echo_input_gain_get(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	struct echoaudio *chip;
+	int c;
+
+	chip = snd_kcontrol_chip(kcontrol);
+	for (c = 0; c < num_analog_busses_in(chip); c++)
+		ucontrol->value.integer.value[c] = chip->input_gain[c];
+	return 0;
+}
+
+static int snd_echo_input_gain_put(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	struct echoaudio *chip;
+	int c, gain, changed;
+
+	changed = 0;
+	chip = snd_kcontrol_chip(kcontrol);
+	spin_lock_irq(&chip->lock);
+	for (c = 0; c < num_analog_busses_in(chip); c++) {
+		gain = ucontrol->value.integer.value[c];
+		/* Ignore out of range values */
+		if (gain < ECHOGAIN_MININP || gain > ECHOGAIN_MAXINP)
+			continue;
+		if (chip->input_gain[c] != gain) {
+			set_input_gain(chip, c, gain);
+			changed = 1;
+		}
+	}
+	if (changed)
+		update_input_line_level(chip);
+	spin_unlock_irq(&chip->lock);
+	return changed;
+}
+
+static const DECLARE_TLV_DB_SCALE(db_scale_input_gain, -2500, 50, 0);
+
+static const struct snd_kcontrol_new snd_echo_line_input_gain = {
+	.name = "Line Capture Volume",
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+	.info = snd_echo_input_gain_info,
+	.get = snd_echo_input_gain_get,
+	.put = snd_echo_input_gain_put,
+	.tlv = {.p = db_scale_input_gain},
+};
+
+#endif /* ECHOCARD_HAS_INPUT_GAIN */
+
+
+
+#ifdef ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL
+
+/************ Analog output nominal level (+4dBu / -10dBV) ***************/
+static int snd_echo_output_nominal_info (struct snd_kcontrol *kcontrol,
+					 struct snd_ctl_elem_info *uinfo)
+{
+	struct echoaudio *chip;
+
+	chip = snd_kcontrol_chip(kcontrol);
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+	uinfo->count = num_analog_busses_out(chip);
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 1;
+	return 0;
+}
+
+static int snd_echo_output_nominal_get(struct snd_kcontrol *kcontrol,
+				       struct snd_ctl_elem_value *ucontrol)
+{
+	struct echoaudio *chip;
+	int c;
+
+	chip = snd_kcontrol_chip(kcontrol);
+	for (c = 0; c < num_analog_busses_out(chip); c++)
+		ucontrol->value.integer.value[c] = chip->nominal_level[c];
+	return 0;
+}
+
+static int snd_echo_output_nominal_put(struct snd_kcontrol *kcontrol,
+				       struct snd_ctl_elem_value *ucontrol)
+{
+	struct echoaudio *chip;
+	int c, changed;
+
+	changed = 0;
+	chip = snd_kcontrol_chip(kcontrol);
+	spin_lock_irq(&chip->lock);
+	for (c = 0; c < num_analog_busses_out(chip); c++) {
+		if (chip->nominal_level[c] != ucontrol->value.integer.value[c]) {
+			set_nominal_level(chip, c,
+					  ucontrol->value.integer.value[c]);
+			changed = 1;
+		}
+	}
+	if (changed)
+		update_output_line_level(chip);
+	spin_unlock_irq(&chip->lock);
+	return changed;
+}
+
+static const struct snd_kcontrol_new snd_echo_output_nominal_level = {
+	.name = "Line Playback Switch (-10dBV)",
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.info = snd_echo_output_nominal_info,
+	.get = snd_echo_output_nominal_get,
+	.put = snd_echo_output_nominal_put,
+};
+
+#endif /* ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL */
+
+
+
+#ifdef ECHOCARD_HAS_INPUT_NOMINAL_LEVEL
+
+/*************** Analog input nominal level (+4dBu / -10dBV) ***************/
+static int snd_echo_input_nominal_info(struct snd_kcontrol *kcontrol,
+				       struct snd_ctl_elem_info *uinfo)
+{
+	struct echoaudio *chip;
+
+	chip = snd_kcontrol_chip(kcontrol);
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+	uinfo->count = num_analog_busses_in(chip);
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 1;
+	return 0;
+}
+
+static int snd_echo_input_nominal_get(struct snd_kcontrol *kcontrol,
+				      struct snd_ctl_elem_value *ucontrol)
+{
+	struct echoaudio *chip;
+	int c;
+
+	chip = snd_kcontrol_chip(kcontrol);
+	for (c = 0; c < num_analog_busses_in(chip); c++)
+		ucontrol->value.integer.value[c] =
+			chip->nominal_level[bx_analog_in(chip) + c];
+	return 0;
+}
+
+static int snd_echo_input_nominal_put(struct snd_kcontrol *kcontrol,
+				      struct snd_ctl_elem_value *ucontrol)
+{
+	struct echoaudio *chip;
+	int c, changed;
+
+	changed = 0;
+	chip = snd_kcontrol_chip(kcontrol);
+	spin_lock_irq(&chip->lock);
+	for (c = 0; c < num_analog_busses_in(chip); c++) {
+		if (chip->nominal_level[bx_analog_in(chip) + c] !=
+		    ucontrol->value.integer.value[c]) {
+			set_nominal_level(chip, bx_analog_in(chip) + c,
+					  ucontrol->value.integer.value[c]);
+			changed = 1;
+		}
+	}
+	if (changed)
+		update_output_line_level(chip);	/* "Output" is not a mistake
+						 * here.
+						 */
+	spin_unlock_irq(&chip->lock);
+	return changed;
+}
+
+static const struct snd_kcontrol_new snd_echo_intput_nominal_level = {
+	.name = "Line Capture Switch (-10dBV)",
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.info = snd_echo_input_nominal_info,
+	.get = snd_echo_input_nominal_get,
+	.put = snd_echo_input_nominal_put,
+};
+
+#endif /* ECHOCARD_HAS_INPUT_NOMINAL_LEVEL */
+
+
+
+#ifdef ECHOCARD_HAS_MONITOR
+
+/******************* Monitor mixer *******************/
+static int snd_echo_mixer_info(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = ECHOGAIN_MINOUT;
+	uinfo->value.integer.max = ECHOGAIN_MAXOUT;
+	return 0;
+}
+
+static int snd_echo_mixer_get(struct snd_kcontrol *kcontrol,
+			      struct snd_ctl_elem_value *ucontrol)
+{
+	struct echoaudio *chip = snd_kcontrol_chip(kcontrol);
+	unsigned int out = ucontrol->id.index / num_busses_in(chip);
+	unsigned int in = ucontrol->id.index % num_busses_in(chip);
+
+	if (out >= ECHO_MAXAUDIOOUTPUTS || in >= ECHO_MAXAUDIOINPUTS)
+		return -EINVAL;
+
+	ucontrol->value.integer.value[0] = chip->monitor_gain[out][in];
+	return 0;
+}
+
+static int snd_echo_mixer_put(struct snd_kcontrol *kcontrol,
+			      struct snd_ctl_elem_value *ucontrol)
+{
+	struct echoaudio *chip;
+	int changed,  gain;
+	unsigned int out, in;
+
+	changed = 0;
+	chip = snd_kcontrol_chip(kcontrol);
+	out = ucontrol->id.index / num_busses_in(chip);
+	in = ucontrol->id.index % num_busses_in(chip);
+	if (out >= ECHO_MAXAUDIOOUTPUTS || in >= ECHO_MAXAUDIOINPUTS)
+		return -EINVAL;
+	gain = ucontrol->value.integer.value[0];
+	if (gain < ECHOGAIN_MINOUT || gain > ECHOGAIN_MAXOUT)
+		return -EINVAL;
+	if (chip->monitor_gain[out][in] != gain) {
+		spin_lock_irq(&chip->lock);
+		set_monitor_gain(chip, out, in, gain);
+		update_output_line_level(chip);
+		spin_unlock_irq(&chip->lock);
+		changed = 1;
+	}
+	return changed;
+}
+
+static struct snd_kcontrol_new snd_echo_monitor_mixer = {
+	.name = "Monitor Mixer Volume",
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+	.info = snd_echo_mixer_info,
+	.get = snd_echo_mixer_get,
+	.put = snd_echo_mixer_put,
+	.tlv = {.p = db_scale_output_gain},
+};
+
+#endif /* ECHOCARD_HAS_MONITOR */
+
+
+
+#ifdef ECHOCARD_HAS_VMIXER
+
+/******************* Vmixer *******************/
+static int snd_echo_vmixer_info(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = ECHOGAIN_MINOUT;
+	uinfo->value.integer.max = ECHOGAIN_MAXOUT;
+	return 0;
+}
+
+static int snd_echo_vmixer_get(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_value *ucontrol)
+{
+	struct echoaudio *chip;
+
+	chip = snd_kcontrol_chip(kcontrol);
+	ucontrol->value.integer.value[0] =
+		chip->vmixer_gain[ucontrol->id.index / num_pipes_out(chip)]
+			[ucontrol->id.index % num_pipes_out(chip)];
+	return 0;
+}
+
+static int snd_echo_vmixer_put(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_value *ucontrol)
+{
+	struct echoaudio *chip;
+	int gain, changed;
+	short vch, out;
+
+	changed = 0;
+	chip = snd_kcontrol_chip(kcontrol);
+	out = ucontrol->id.index / num_pipes_out(chip);
+	vch = ucontrol->id.index % num_pipes_out(chip);
+	gain = ucontrol->value.integer.value[0];
+	if (gain < ECHOGAIN_MINOUT || gain > ECHOGAIN_MAXOUT)
+		return -EINVAL;
+	if (chip->vmixer_gain[out][vch] != ucontrol->value.integer.value[0]) {
+		spin_lock_irq(&chip->lock);
+		set_vmixer_gain(chip, out, vch, ucontrol->value.integer.value[0]);
+		update_vmixer_level(chip);
+		spin_unlock_irq(&chip->lock);
+		changed = 1;
+	}
+	return changed;
+}
+
+static struct snd_kcontrol_new snd_echo_vmixer = {
+	.name = "VMixer Volume",
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+	.info = snd_echo_vmixer_info,
+	.get = snd_echo_vmixer_get,
+	.put = snd_echo_vmixer_put,
+	.tlv = {.p = db_scale_output_gain},
+};
+
+#endif /* ECHOCARD_HAS_VMIXER */
+
+
+
+#ifdef ECHOCARD_HAS_DIGITAL_MODE_SWITCH
+
+/******************* Digital mode switch *******************/
+static int snd_echo_digital_mode_info(struct snd_kcontrol *kcontrol,
+				      struct snd_ctl_elem_info *uinfo)
+{
+	static const char * const names[4] = {
+		"S/PDIF Coaxial", "S/PDIF Optical", "ADAT Optical",
+		"S/PDIF Cdrom"
+	};
+	struct echoaudio *chip;
+
+	chip = snd_kcontrol_chip(kcontrol);
+	return snd_ctl_enum_info(uinfo, 1, chip->num_digital_modes, names);
+}
+
+static int snd_echo_digital_mode_get(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	struct echoaudio *chip;
+	int i, mode;
+
+	chip = snd_kcontrol_chip(kcontrol);
+	mode = chip->digital_mode;
+	for (i = chip->num_digital_modes - 1; i >= 0; i--)
+		if (mode == chip->digital_mode_list[i]) {
+			ucontrol->value.enumerated.item[0] = i;
+			break;
+		}
+	return 0;
+}
+
+static int snd_echo_digital_mode_put(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	struct echoaudio *chip;
+	int changed;
+	unsigned short emode, dmode;
+
+	changed = 0;
+	chip = snd_kcontrol_chip(kcontrol);
+
+	emode = ucontrol->value.enumerated.item[0];
+	if (emode >= chip->num_digital_modes)
+		return -EINVAL;
+	dmode = chip->digital_mode_list[emode];
+
+	if (dmode != chip->digital_mode) {
+		/* mode_mutex is required to make this operation atomic wrt
+		pcm_digital_*_open() and set_input_clock() functions. */
+		mutex_lock(&chip->mode_mutex);
+
+		/* Do not allow the user to change the digital mode when a pcm
+		device is open because it also changes the number of channels
+		and the allowed sample rates */
+		if (chip->opencount) {
+			changed = -EAGAIN;
+		} else {
+			changed = set_digital_mode(chip, dmode);
+			/* If we had to change the clock source, report it */
+			if (changed > 0 && chip->clock_src_ctl) {
+				snd_ctl_notify(chip->card,
+					       SNDRV_CTL_EVENT_MASK_VALUE,
+					       &chip->clock_src_ctl->id);
+				dev_dbg(chip->card->dev,
+					"SDM() =%d\n", changed);
+			}
+			if (changed >= 0)
+				changed = 1;	/* No errors */
+		}
+		mutex_unlock(&chip->mode_mutex);
+	}
+	return changed;
+}
+
+static const struct snd_kcontrol_new snd_echo_digital_mode_switch = {
+	.name = "Digital mode Switch",
+	.iface = SNDRV_CTL_ELEM_IFACE_CARD,
+	.info = snd_echo_digital_mode_info,
+	.get = snd_echo_digital_mode_get,
+	.put = snd_echo_digital_mode_put,
+};
+
+#endif /* ECHOCARD_HAS_DIGITAL_MODE_SWITCH */
+
+
+
+#ifdef ECHOCARD_HAS_DIGITAL_IO
+
+/******************* S/PDIF mode switch *******************/
+static int snd_echo_spdif_mode_info(struct snd_kcontrol *kcontrol,
+				    struct snd_ctl_elem_info *uinfo)
+{
+	static const char * const names[2] = {"Consumer", "Professional"};
+
+	return snd_ctl_enum_info(uinfo, 1, 2, names);
+}
+
+static int snd_echo_spdif_mode_get(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	struct echoaudio *chip;
+
+	chip = snd_kcontrol_chip(kcontrol);
+	ucontrol->value.enumerated.item[0] = !!chip->professional_spdif;
+	return 0;
+}
+
+static int snd_echo_spdif_mode_put(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	struct echoaudio *chip;
+	int mode;
+
+	chip = snd_kcontrol_chip(kcontrol);
+	mode = !!ucontrol->value.enumerated.item[0];
+	if (mode != chip->professional_spdif) {
+		spin_lock_irq(&chip->lock);
+		set_professional_spdif(chip, mode);
+		spin_unlock_irq(&chip->lock);
+		return 1;
+	}
+	return 0;
+}
+
+static const struct snd_kcontrol_new snd_echo_spdif_mode_switch = {
+	.name = "S/PDIF mode Switch",
+	.iface = SNDRV_CTL_ELEM_IFACE_CARD,
+	.info = snd_echo_spdif_mode_info,
+	.get = snd_echo_spdif_mode_get,
+	.put = snd_echo_spdif_mode_put,
+};
+
+#endif /* ECHOCARD_HAS_DIGITAL_IO */
+
+
+
+#ifdef ECHOCARD_HAS_EXTERNAL_CLOCK
+
+/******************* Select input clock source *******************/
+static int snd_echo_clock_source_info(struct snd_kcontrol *kcontrol,
+				      struct snd_ctl_elem_info *uinfo)
+{
+	static const char * const names[8] = {
+		"Internal", "Word", "Super", "S/PDIF", "ADAT", "ESync",
+		"ESync96", "MTC"
+	};
+	struct echoaudio *chip;
+
+	chip = snd_kcontrol_chip(kcontrol);
+	return snd_ctl_enum_info(uinfo, 1, chip->num_clock_sources, names);
+}
+
+static int snd_echo_clock_source_get(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	struct echoaudio *chip;
+	int i, clock;
+
+	chip = snd_kcontrol_chip(kcontrol);
+	clock = chip->input_clock;
+
+	for (i = 0; i < chip->num_clock_sources; i++)
+		if (clock == chip->clock_source_list[i])
+			ucontrol->value.enumerated.item[0] = i;
+
+	return 0;
+}
+
+static int snd_echo_clock_source_put(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	struct echoaudio *chip;
+	int changed;
+	unsigned int eclock, dclock;
+
+	changed = 0;
+	chip = snd_kcontrol_chip(kcontrol);
+	eclock = ucontrol->value.enumerated.item[0];
+	if (eclock >= chip->input_clock_types)
+		return -EINVAL;
+	dclock = chip->clock_source_list[eclock];
+	if (chip->input_clock != dclock) {
+		mutex_lock(&chip->mode_mutex);
+		spin_lock_irq(&chip->lock);
+		if ((changed = set_input_clock(chip, dclock)) == 0)
+			changed = 1;	/* no errors */
+		spin_unlock_irq(&chip->lock);
+		mutex_unlock(&chip->mode_mutex);
+	}
+
+	if (changed < 0)
+		dev_dbg(chip->card->dev,
+			"seticlk val%d err 0x%x\n", dclock, changed);
+
+	return changed;
+}
+
+static const struct snd_kcontrol_new snd_echo_clock_source_switch = {
+	.name = "Sample Clock Source",
+	.iface = SNDRV_CTL_ELEM_IFACE_PCM,
+	.info = snd_echo_clock_source_info,
+	.get = snd_echo_clock_source_get,
+	.put = snd_echo_clock_source_put,
+};
+
+#endif /* ECHOCARD_HAS_EXTERNAL_CLOCK */
+
+
+
+#ifdef ECHOCARD_HAS_PHANTOM_POWER
+
+/******************* Phantom power switch *******************/
+#define snd_echo_phantom_power_info	snd_ctl_boolean_mono_info
+
+static int snd_echo_phantom_power_get(struct snd_kcontrol *kcontrol,
+				      struct snd_ctl_elem_value *ucontrol)
+{
+	struct echoaudio *chip = snd_kcontrol_chip(kcontrol);
+
+	ucontrol->value.integer.value[0] = chip->phantom_power;
+	return 0;
+}
+
+static int snd_echo_phantom_power_put(struct snd_kcontrol *kcontrol,
+				      struct snd_ctl_elem_value *ucontrol)
+{
+	struct echoaudio *chip = snd_kcontrol_chip(kcontrol);
+	int power, changed = 0;
+
+	power = !!ucontrol->value.integer.value[0];
+	if (chip->phantom_power != power) {
+		spin_lock_irq(&chip->lock);
+		changed = set_phantom_power(chip, power);
+		spin_unlock_irq(&chip->lock);
+		if (changed == 0)
+			changed = 1;	/* no errors */
+	}
+	return changed;
+}
+
+static const struct snd_kcontrol_new snd_echo_phantom_power_switch = {
+	.name = "Phantom power Switch",
+	.iface = SNDRV_CTL_ELEM_IFACE_CARD,
+	.info = snd_echo_phantom_power_info,
+	.get = snd_echo_phantom_power_get,
+	.put = snd_echo_phantom_power_put,
+};
+
+#endif /* ECHOCARD_HAS_PHANTOM_POWER */
+
+
+
+#ifdef ECHOCARD_HAS_DIGITAL_IN_AUTOMUTE
+
+/******************* Digital input automute switch *******************/
+#define snd_echo_automute_info		snd_ctl_boolean_mono_info
+
+static int snd_echo_automute_get(struct snd_kcontrol *kcontrol,
+				 struct snd_ctl_elem_value *ucontrol)
+{
+	struct echoaudio *chip = snd_kcontrol_chip(kcontrol);
+
+	ucontrol->value.integer.value[0] = chip->digital_in_automute;
+	return 0;
+}
+
+static int snd_echo_automute_put(struct snd_kcontrol *kcontrol,
+				 struct snd_ctl_elem_value *ucontrol)
+{
+	struct echoaudio *chip = snd_kcontrol_chip(kcontrol);
+	int automute, changed = 0;
+
+	automute = !!ucontrol->value.integer.value[0];
+	if (chip->digital_in_automute != automute) {
+		spin_lock_irq(&chip->lock);
+		changed = set_input_auto_mute(chip, automute);
+		spin_unlock_irq(&chip->lock);
+		if (changed == 0)
+			changed = 1;	/* no errors */
+	}
+	return changed;
+}
+
+static const struct snd_kcontrol_new snd_echo_automute_switch = {
+	.name = "Digital Capture Switch (automute)",
+	.iface = SNDRV_CTL_ELEM_IFACE_CARD,
+	.info = snd_echo_automute_info,
+	.get = snd_echo_automute_get,
+	.put = snd_echo_automute_put,
+};
+
+#endif /* ECHOCARD_HAS_DIGITAL_IN_AUTOMUTE */
+
+
+
+/******************* VU-meters switch *******************/
+#define snd_echo_vumeters_switch_info		snd_ctl_boolean_mono_info
+
+static int snd_echo_vumeters_switch_put(struct snd_kcontrol *kcontrol,
+					struct snd_ctl_elem_value *ucontrol)
+{
+	struct echoaudio *chip;
+
+	chip = snd_kcontrol_chip(kcontrol);
+	spin_lock_irq(&chip->lock);
+	set_meters_on(chip, ucontrol->value.integer.value[0]);
+	spin_unlock_irq(&chip->lock);
+	return 1;
+}
+
+static const struct snd_kcontrol_new snd_echo_vumeters_switch = {
+	.name = "VU-meters Switch",
+	.iface = SNDRV_CTL_ELEM_IFACE_CARD,
+	.access = SNDRV_CTL_ELEM_ACCESS_WRITE,
+	.info = snd_echo_vumeters_switch_info,
+	.put = snd_echo_vumeters_switch_put,
+};
+
+
+
+/***** Read VU-meters (input, output, analog and digital together) *****/
+static int snd_echo_vumeters_info(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 96;
+	uinfo->value.integer.min = ECHOGAIN_MINOUT;
+	uinfo->value.integer.max = 0;
+	return 0;
+}
+
+static int snd_echo_vumeters_get(struct snd_kcontrol *kcontrol,
+				 struct snd_ctl_elem_value *ucontrol)
+{
+	struct echoaudio *chip;
+
+	chip = snd_kcontrol_chip(kcontrol);
+	get_audio_meters(chip, ucontrol->value.integer.value);
+	return 0;
+}
+
+static const struct snd_kcontrol_new snd_echo_vumeters = {
+	.name = "VU-meters",
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READ |
+		  SNDRV_CTL_ELEM_ACCESS_VOLATILE |
+		  SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+	.info = snd_echo_vumeters_info,
+	.get = snd_echo_vumeters_get,
+	.tlv = {.p = db_scale_output_gain},
+};
+
+
+
+/*** Channels info - it exports informations about the number of channels ***/
+static int snd_echo_channels_info_info(struct snd_kcontrol *kcontrol,
+				       struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 6;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 1 << ECHO_CLOCK_NUMBER;
+	return 0;
+}
+
+static int snd_echo_channels_info_get(struct snd_kcontrol *kcontrol,
+				      struct snd_ctl_elem_value *ucontrol)
+{
+	struct echoaudio *chip;
+	int detected, clocks, bit, src;
+
+	chip = snd_kcontrol_chip(kcontrol);
+	ucontrol->value.integer.value[0] = num_busses_in(chip);
+	ucontrol->value.integer.value[1] = num_analog_busses_in(chip);
+	ucontrol->value.integer.value[2] = num_busses_out(chip);
+	ucontrol->value.integer.value[3] = num_analog_busses_out(chip);
+	ucontrol->value.integer.value[4] = num_pipes_out(chip);
+
+	/* Compute the bitmask of the currently valid input clocks */
+	detected = detect_input_clocks(chip);
+	clocks = 0;
+	src = chip->num_clock_sources - 1;
+	for (bit = ECHO_CLOCK_NUMBER - 1; bit >= 0; bit--)
+		if (detected & (1 << bit))
+			for (; src >= 0; src--)
+				if (bit == chip->clock_source_list[src]) {
+					clocks |= 1 << src;
+					break;
+				}
+	ucontrol->value.integer.value[5] = clocks;
+
+	return 0;
+}
+
+static const struct snd_kcontrol_new snd_echo_channels_info = {
+	.name = "Channels info",
+	.iface = SNDRV_CTL_ELEM_IFACE_HWDEP,
+	.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+	.info = snd_echo_channels_info_info,
+	.get = snd_echo_channels_info_get,
+};
+
+
+
+
+/******************************************************************************
+	IRQ Handling
+******************************************************************************/
+/* Check if a period has elapsed since last interrupt
+ *
+ * Don't make any updates to state; PCM core handles this with the
+ * correct locks.
+ *
+ * \return true if a period has elapsed, otherwise false
+ */
+static bool period_has_elapsed(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct audiopipe *pipe = runtime->private_data;
+	u32 counter, step;
+	size_t period_bytes;
+
+	if (pipe->state != PIPE_STATE_STARTED)
+		return false;
+
+	period_bytes = frames_to_bytes(runtime, runtime->period_size);
+
+	counter = le32_to_cpu(*pipe->dma_counter);  /* presumed atomic */
+
+	step = counter - pipe->last_period;  /* handles wrapping */
+	step -= step % period_bytes;  /* acknowledge whole periods only */
+
+	if (step == 0)
+		return false;  /* haven't advanced a whole period yet */
+
+	pipe->last_period += step;  /* used exclusively by us */
+	return true;
+}
+
+static irqreturn_t snd_echo_interrupt(int irq, void *dev_id)
+{
+	struct echoaudio *chip = dev_id;
+	int ss, st;
+
+	spin_lock(&chip->lock);
+	st = service_irq(chip);
+	if (st < 0) {
+		spin_unlock(&chip->lock);
+		return IRQ_NONE;
+	}
+	/* The hardware doesn't tell us which substream caused the irq,
+	thus we have to check all running substreams. */
+	for (ss = 0; ss < DSP_MAXPIPES; ss++) {
+		struct snd_pcm_substream *substream;
+
+		substream = chip->substream[ss];
+		if (substream && period_has_elapsed(substream)) {
+			spin_unlock(&chip->lock);
+			snd_pcm_period_elapsed(substream);
+			spin_lock(&chip->lock);
+		}
+	}
+	spin_unlock(&chip->lock);
+
+#ifdef ECHOCARD_HAS_MIDI
+	if (st > 0 && chip->midi_in) {
+		snd_rawmidi_receive(chip->midi_in, chip->midi_buffer, st);
+		dev_dbg(chip->card->dev, "rawmidi_iread=%d\n", st);
+	}
+#endif
+	return IRQ_HANDLED;
+}
+
+
+
+
+/******************************************************************************
+	Module construction / destruction
+******************************************************************************/
+
+static int snd_echo_free(struct echoaudio *chip)
+{
+	if (chip->comm_page)
+		rest_in_peace(chip);
+
+	if (chip->irq >= 0)
+		free_irq(chip->irq, chip);
+
+	if (chip->comm_page)
+		snd_dma_free_pages(&chip->commpage_dma_buf);
+
+	iounmap(chip->dsp_registers);
+	release_and_free_resource(chip->iores);
+	pci_disable_device(chip->pci);
+
+	/* release chip data */
+	free_firmware_cache(chip);
+	kfree(chip);
+	return 0;
+}
+
+
+
+static int snd_echo_dev_free(struct snd_device *device)
+{
+	struct echoaudio *chip = device->device_data;
+
+	return snd_echo_free(chip);
+}
+
+
+
+/* <--snd_echo_probe() */
+static int snd_echo_create(struct snd_card *card,
+			   struct pci_dev *pci,
+			   struct echoaudio **rchip)
+{
+	struct echoaudio *chip;
+	int err;
+	size_t sz;
+	static const struct snd_device_ops ops = {
+		.dev_free = snd_echo_dev_free,
+	};
+
+	*rchip = NULL;
+
+	pci_write_config_byte(pci, PCI_LATENCY_TIMER, 0xC0);
+
+	if ((err = pci_enable_device(pci)) < 0)
+		return err;
+	pci_set_master(pci);
+
+	/* Allocate chip if needed */
+	if (!*rchip) {
+		chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+		if (!chip) {
+			pci_disable_device(pci);
+			return -ENOMEM;
+		}
+		dev_dbg(card->dev, "chip=%p\n", chip);
+		spin_lock_init(&chip->lock);
+		chip->card = card;
+		chip->pci = pci;
+		chip->irq = -1;
+		chip->opencount = 0;
+		mutex_init(&chip->mode_mutex);
+		chip->can_set_rate = 1;
+	} else {
+		/* If this was called from the resume function, chip is
+		 * already allocated and it contains current card settings.
+		 */
+		chip = *rchip;
+	}
+
+	/* PCI resource allocation */
+	chip->dsp_registers_phys = pci_resource_start(pci, 0);
+	sz = pci_resource_len(pci, 0);
+	if (sz > PAGE_SIZE)
+		sz = PAGE_SIZE;		/* We map only the required part */
+
+	if ((chip->iores = request_mem_region(chip->dsp_registers_phys, sz,
+					      ECHOCARD_NAME)) == NULL) {
+		dev_err(chip->card->dev, "cannot get memory region\n");
+		snd_echo_free(chip);
+		return -EBUSY;
+	}
+	chip->dsp_registers = ioremap(chip->dsp_registers_phys, sz);
+	if (!chip->dsp_registers) {
+		dev_err(chip->card->dev, "ioremap failed\n");
+		snd_echo_free(chip);
+		return -ENOMEM;
+	}
+
+	if (request_irq(pci->irq, snd_echo_interrupt, IRQF_SHARED,
+			KBUILD_MODNAME, chip)) {
+		dev_err(chip->card->dev, "cannot grab irq\n");
+		snd_echo_free(chip);
+		return -EBUSY;
+	}
+	chip->irq = pci->irq;
+	card->sync_irq = chip->irq;
+	dev_dbg(card->dev, "pci=%p irq=%d subdev=%04x Init hardware...\n",
+		chip->pci, chip->irq, chip->pci->subsystem_device);
+
+	/* Create the DSP comm page - this is the area of memory used for most
+	of the communication with the DSP, which accesses it via bus mastering */
+	if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, &chip->pci->dev,
+				sizeof(struct comm_page),
+				&chip->commpage_dma_buf) < 0) {
+		dev_err(chip->card->dev, "cannot allocate the comm page\n");
+		snd_echo_free(chip);
+		return -ENOMEM;
+	}
+	chip->comm_page_phys = chip->commpage_dma_buf.addr;
+	chip->comm_page = (struct comm_page *)chip->commpage_dma_buf.area;
+
+	err = init_hw(chip, chip->pci->device, chip->pci->subsystem_device);
+	if (err >= 0)
+		err = set_mixer_defaults(chip);
+	if (err < 0) {
+		dev_err(card->dev, "init_hw err=%d\n", err);
+		snd_echo_free(chip);
+		return err;
+	}
+
+	if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) {
+		snd_echo_free(chip);
+		return err;
+	}
+	*rchip = chip;
+	/* Init done ! */
+	return 0;
+}
+
+
+
+/* constructor */
+static int snd_echo_probe(struct pci_dev *pci,
+			  const struct pci_device_id *pci_id)
+{
+	static int dev;
+	struct snd_card *card;
+	struct echoaudio *chip;
+	char *dsp;
+	__maybe_unused int i;
+	int err;
+
+	if (dev >= SNDRV_CARDS)
+		return -ENODEV;
+	if (!enable[dev]) {
+		dev++;
+		return -ENOENT;
+	}
+
+	i = 0;
+	err = snd_card_new(&pci->dev, index[dev], id[dev], THIS_MODULE,
+			   0, &card);
+	if (err < 0)
+		return err;
+
+	chip = NULL;	/* Tells snd_echo_create to allocate chip */
+	if ((err = snd_echo_create(card, pci, &chip)) < 0) {
+		snd_card_free(card);
+		return err;
+	}
+
+	strcpy(card->driver, "Echo_" ECHOCARD_NAME);
+	strcpy(card->shortname, chip->card_name);
+
+	dsp = "56301";
+	if (pci_id->device == 0x3410)
+		dsp = "56361";
+
+	sprintf(card->longname, "%s rev.%d (DSP%s) at 0x%lx irq %i",
+		card->shortname, pci_id->subdevice & 0x000f, dsp,
+		chip->dsp_registers_phys, chip->irq);
+
+	if ((err = snd_echo_new_pcm(chip)) < 0) {
+		dev_err(chip->card->dev, "new pcm error %d\n", err);
+		snd_card_free(card);
+		return err;
+	}
+
+#ifdef ECHOCARD_HAS_MIDI
+	if (chip->has_midi) {	/* Some Mia's do not have midi */
+		if ((err = snd_echo_midi_create(card, chip)) < 0) {
+			dev_err(chip->card->dev, "new midi error %d\n", err);
+			snd_card_free(card);
+			return err;
+		}
+	}
+#endif
+
+#ifdef ECHOCARD_HAS_VMIXER
+	snd_echo_vmixer.count = num_pipes_out(chip) * num_busses_out(chip);
+	if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_vmixer, chip))) < 0)
+		goto ctl_error;
+#ifdef ECHOCARD_HAS_LINE_OUT_GAIN
+	err = snd_ctl_add(chip->card,
+			  snd_ctl_new1(&snd_echo_line_output_gain, chip));
+	if (err < 0)
+		goto ctl_error;
+#endif
+#else /* ECHOCARD_HAS_VMIXER */
+	err = snd_ctl_add(chip->card,
+			  snd_ctl_new1(&snd_echo_pcm_output_gain, chip));
+	if (err < 0)
+		goto ctl_error;
+#endif /* ECHOCARD_HAS_VMIXER */
+
+#ifdef ECHOCARD_HAS_INPUT_GAIN
+	if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_line_input_gain, chip))) < 0)
+		goto ctl_error;
+#endif
+
+#ifdef ECHOCARD_HAS_INPUT_NOMINAL_LEVEL
+	if (!chip->hasnt_input_nominal_level)
+		if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_intput_nominal_level, chip))) < 0)
+			goto ctl_error;
+#endif
+
+#ifdef ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL
+	if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_output_nominal_level, chip))) < 0)
+		goto ctl_error;
+#endif
+
+	if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_vumeters_switch, chip))) < 0)
+		goto ctl_error;
+
+	if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_vumeters, chip))) < 0)
+		goto ctl_error;
+
+#ifdef ECHOCARD_HAS_MONITOR
+	snd_echo_monitor_mixer.count = num_busses_in(chip) * num_busses_out(chip);
+	if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_monitor_mixer, chip))) < 0)
+		goto ctl_error;
+#endif
+
+#ifdef ECHOCARD_HAS_DIGITAL_IN_AUTOMUTE
+	if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_automute_switch, chip))) < 0)
+		goto ctl_error;
+#endif
+
+	if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_channels_info, chip))) < 0)
+		goto ctl_error;
+
+#ifdef ECHOCARD_HAS_DIGITAL_MODE_SWITCH
+	/* Creates a list of available digital modes */
+	chip->num_digital_modes = 0;
+	for (i = 0; i < 6; i++)
+		if (chip->digital_modes & (1 << i))
+			chip->digital_mode_list[chip->num_digital_modes++] = i;
+
+	if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_digital_mode_switch, chip))) < 0)
+		goto ctl_error;
+#endif /* ECHOCARD_HAS_DIGITAL_MODE_SWITCH */
+
+#ifdef ECHOCARD_HAS_EXTERNAL_CLOCK
+	/* Creates a list of available clock sources */
+	chip->num_clock_sources = 0;
+	for (i = 0; i < 10; i++)
+		if (chip->input_clock_types & (1 << i))
+			chip->clock_source_list[chip->num_clock_sources++] = i;
+
+	if (chip->num_clock_sources > 1) {
+		chip->clock_src_ctl = snd_ctl_new1(&snd_echo_clock_source_switch, chip);
+		if ((err = snd_ctl_add(chip->card, chip->clock_src_ctl)) < 0)
+			goto ctl_error;
+	}
+#endif /* ECHOCARD_HAS_EXTERNAL_CLOCK */
+
+#ifdef ECHOCARD_HAS_DIGITAL_IO
+	if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_spdif_mode_switch, chip))) < 0)
+		goto ctl_error;
+#endif
+
+#ifdef ECHOCARD_HAS_PHANTOM_POWER
+	if (chip->has_phantom_power)
+		if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_phantom_power_switch, chip))) < 0)
+			goto ctl_error;
+#endif
+
+	err = snd_card_register(card);
+	if (err < 0)
+		goto ctl_error;
+	dev_info(card->dev, "Card registered: %s\n", card->longname);
+
+	pci_set_drvdata(pci, chip);
+	dev++;
+	return 0;
+
+ctl_error:
+	dev_err(card->dev, "new control error %d\n", err);
+	snd_card_free(card);
+	return err;
+}
+
+
+
+#if defined(CONFIG_PM_SLEEP)
+
+static int snd_echo_suspend(struct device *dev)
+{
+	struct echoaudio *chip = dev_get_drvdata(dev);
+
+#ifdef ECHOCARD_HAS_MIDI
+	/* This call can sleep */
+	if (chip->midi_out)
+		snd_echo_midi_output_trigger(chip->midi_out, 0);
+#endif
+	spin_lock_irq(&chip->lock);
+	if (wait_handshake(chip)) {
+		spin_unlock_irq(&chip->lock);
+		return -EIO;
+	}
+	clear_handshake(chip);
+	if (send_vector(chip, DSP_VC_GO_COMATOSE) < 0) {
+		spin_unlock_irq(&chip->lock);
+		return -EIO;
+	}
+	spin_unlock_irq(&chip->lock);
+
+	chip->dsp_code = NULL;
+	free_irq(chip->irq, chip);
+	chip->irq = -1;
+	chip->card->sync_irq = -1;
+	return 0;
+}
+
+
+
+static int snd_echo_resume(struct device *dev)
+{
+	struct pci_dev *pci = to_pci_dev(dev);
+	struct echoaudio *chip = dev_get_drvdata(dev);
+	struct comm_page *commpage, *commpage_bak;
+	u32 pipe_alloc_mask;
+	int err;
+
+	commpage = chip->comm_page;
+	commpage_bak = kmemdup(commpage, sizeof(*commpage), GFP_KERNEL);
+	if (commpage_bak == NULL)
+		return -ENOMEM;
+
+	err = init_hw(chip, chip->pci->device, chip->pci->subsystem_device);
+	if (err < 0) {
+		kfree(commpage_bak);
+		dev_err(dev, "resume init_hw err=%d\n", err);
+		return err;
+	}
+
+	/* Temporarily set chip->pipe_alloc_mask=0 otherwise
+	 * restore_dsp_settings() fails.
+	 */
+	pipe_alloc_mask = chip->pipe_alloc_mask;
+	chip->pipe_alloc_mask = 0;
+	err = restore_dsp_rettings(chip);
+	chip->pipe_alloc_mask = pipe_alloc_mask;
+	if (err < 0) {
+		kfree(commpage_bak);
+		return err;
+	}
+
+	memcpy(&commpage->audio_format, &commpage_bak->audio_format,
+		sizeof(commpage->audio_format));
+	memcpy(&commpage->sglist_addr, &commpage_bak->sglist_addr,
+		sizeof(commpage->sglist_addr));
+	memcpy(&commpage->midi_output, &commpage_bak->midi_output,
+		sizeof(commpage->midi_output));
+	kfree(commpage_bak);
+
+	if (request_irq(pci->irq, snd_echo_interrupt, IRQF_SHARED,
+			KBUILD_MODNAME, chip)) {
+		dev_err(chip->card->dev, "cannot grab irq\n");
+		return -EBUSY;
+	}
+	chip->irq = pci->irq;
+	chip->card->sync_irq = chip->irq;
+	dev_dbg(dev, "resume irq=%d\n", chip->irq);
+
+#ifdef ECHOCARD_HAS_MIDI
+	if (chip->midi_input_enabled)
+		enable_midi_input(chip, true);
+	if (chip->midi_out)
+		snd_echo_midi_output_trigger(chip->midi_out, 1);
+#endif
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(snd_echo_pm, snd_echo_suspend, snd_echo_resume);
+#define SND_ECHO_PM_OPS	&snd_echo_pm
+#else
+#define SND_ECHO_PM_OPS	NULL
+#endif /* CONFIG_PM_SLEEP */
+
+
+static void snd_echo_remove(struct pci_dev *pci)
+{
+	struct echoaudio *chip;
+
+	chip = pci_get_drvdata(pci);
+	if (chip)
+		snd_card_free(chip->card);
+}
+
+
+
+/******************************************************************************
+	Everything starts and ends here
+******************************************************************************/
+
+/* pci_driver definition */
+static struct pci_driver echo_driver = {
+	.name = KBUILD_MODNAME,
+	.id_table = snd_echo_ids,
+	.probe = snd_echo_probe,
+	.remove = snd_echo_remove,
+	.driver = {
+		.pm = SND_ECHO_PM_OPS,
+	},
+};
+
+module_pci_driver(echo_driver);
diff --git a/sound/pci/echoaudio/echoaudio.h b/sound/pci/echoaudio/echoaudio.h
new file mode 100644
index 000000000..0afe13f7b
--- /dev/null
+++ b/sound/pci/echoaudio/echoaudio.h
@@ -0,0 +1,566 @@
+/****************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+ ****************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+ ****************************************************************************
+
+
+   Here's a block diagram of how most of the cards work:
+
+                  +-----------+
+           record |           |<-------------------- Inputs
+          <-------|           |        |
+     PCI          | Transport |        |
+     bus          |  engine   |       \|/
+          ------->|           |    +-------+
+            play  |           |--->|monitor|-------> Outputs
+                  +-----------+    | mixer |
+                                   +-------+
+
+   The lines going to and from the PCI bus represent "pipes".  A pipe performs
+   audio transport - moving audio data to and from buffers on the host via
+   bus mastering.
+
+   The inputs and outputs on the right represent input and output "busses."
+   A bus is a physical, real connection to the outside world.  An example
+   of a bus would be the 1/4" analog connectors on the back of Layla or
+   an RCA S/PDIF connector.
+
+   For most cards, there is a one-to-one correspondence between outputs
+   and busses; that is, each individual pipe is hard-wired to a single bus.
+
+   Cards that work this way are Darla20, Gina20, Layla20, Darla24, Gina24,
+   Layla24, Mona, and Indigo.
+
+
+   Mia has a feature called "virtual outputs."
+
+
+                  +-----------+
+           record |           |<----------------------------- Inputs
+          <-------|           |                  |
+     PCI          | Transport |                  |
+     bus          |  engine   |                 \|/
+          ------->|           |   +------+   +-------+
+            play  |           |-->|vmixer|-->|monitor|-------> Outputs
+                  +-----------+   +------+   | mixer |
+                                             +-------+
+
+
+   Obviously, the difference here is the box labeled "vmixer."  Vmixer is
+   short for "virtual output mixer."  For Mia, pipes are *not* hard-wired
+   to a single bus; the vmixer lets you mix any pipe to any bus in any
+   combination.
+
+   Note, however, that the left-hand side of the diagram is unchanged.
+   Transport works exactly the same way - the difference is in the mixer stage.
+
+
+   Pipes and busses are numbered starting at zero.
+
+
+
+   Pipe index
+   ==========
+
+   A number of calls in CEchoGals refer to a "pipe index".  A pipe index is
+   a unique number for a pipe that unambiguously refers to a playback or record
+   pipe.  Pipe indices are numbered starting with analog outputs, followed by
+   digital outputs, then analog inputs, then digital inputs.
+
+   Take Gina24 as an example:
+
+   Pipe index
+
+   0-7            Analog outputs (0 .. FirstDigitalBusOut-1)
+   8-15           Digital outputs (FirstDigitalBusOut .. NumBussesOut-1)
+   16-17          Analog inputs
+   18-25          Digital inputs
+
+
+   You get the pipe index by calling CEchoGals::OpenAudio; the other transport
+   functions take the pipe index as a parameter.  If you need a pipe index for
+   some other reason, use the handy Makepipe_index method.
+
+
+   Some calls take a CChannelMask parameter; CChannelMask is a handy way to
+   group pipe indices.
+
+
+
+   Digital mode switch
+   ===================
+
+   Some cards (right now, Gina24, Layla24, and Mona) have a Digital Mode Switch
+   or DMS.  Cards with a DMS can be set to one of three mutually exclusive
+   digital modes: S/PDIF RCA, S/PDIF optical, or ADAT optical.
+
+   This may create some confusion since ADAT optical is 8 channels wide and
+   S/PDIF is only two channels wide.  Gina24, Layla24, and Mona handle this
+   by acting as if they always have 8 digital outs and ins.  If you are in
+   either S/PDIF mode, the last 6 channels don't do anything - data sent
+   out these channels is thrown away and you will always record zeros.
+
+   Note that with Gina24, Layla24, and Mona, sample rates above 50 kHz are
+   only available if you have the card configured for S/PDIF optical or S/PDIF
+   RCA.
+
+
+
+   Double speed mode
+   =================
+
+   Some of the cards support 88.2 kHz and 96 kHz sampling (Darla24, Gina24,
+   Layla24, Mona, Mia, and Indigo).  For these cards, the driver sometimes has
+   to worry about "double speed mode"; double speed mode applies whenever the
+   sampling rate is above 50 kHz.
+
+   For instance, Mona and Layla24 support word clock sync.  However, they
+   actually support two different word clock modes - single speed (below
+   50 kHz) and double speed (above 50 kHz).  The hardware detects if a single
+   or double speed word clock signal is present; the generic code uses that
+   information to determine which mode to use.
+
+   The generic code takes care of all this for you.
+*/
+
+
+#ifndef _ECHOAUDIO_H_
+#define _ECHOAUDIO_H_
+
+
+#include "echoaudio_dsp.h"
+
+
+
+/***********************************************************************
+
+	PCI configuration space
+
+***********************************************************************/
+
+/*
+ * PCI vendor ID and device IDs for the hardware
+ */
+#define VENDOR_ID		0x1057
+#define DEVICE_ID_56301		0x1801
+#define DEVICE_ID_56361		0x3410
+#define SUBVENDOR_ID		0xECC0
+
+
+/*
+ * Valid Echo PCI subsystem card IDs
+ */
+#define DARLA20			0x0010
+#define GINA20			0x0020
+#define LAYLA20			0x0030
+#define DARLA24			0x0040
+#define GINA24			0x0050
+#define LAYLA24			0x0060
+#define MONA			0x0070
+#define MIA			0x0080
+#define INDIGO			0x0090
+#define INDIGO_IO		0x00a0
+#define INDIGO_DJ		0x00b0
+#define DC8			0x00c0
+#define INDIGO_IOX		0x00d0
+#define INDIGO_DJX		0x00e0
+#define ECHO3G			0x0100
+
+
+/************************************************************************
+
+	Array sizes and so forth
+
+***********************************************************************/
+
+/*
+ * Sizes
+ */
+#define ECHO_MAXAUDIOINPUTS	32	/* Max audio input channels */
+#define ECHO_MAXAUDIOOUTPUTS	32	/* Max audio output channels */
+#define ECHO_MAXAUDIOPIPES	32	/* Max number of input and output
+					 * pipes */
+#define E3G_MAX_OUTPUTS		16
+#define ECHO_MAXMIDIJACKS	1	/* Max MIDI ports */
+#define ECHO_MIDI_QUEUE_SZ 	512	/* Max MIDI input queue entries */
+#define ECHO_MTC_QUEUE_SZ	32	/* Max MIDI time code input queue
+					 * entries */
+
+/*
+ * MIDI activity indicator timeout
+ */
+#define MIDI_ACTIVITY_TIMEOUT_USEC	200000
+
+
+/****************************************************************************
+ 
+   Clocks
+
+*****************************************************************************/
+
+/*
+ * Clock numbers
+ */
+#define ECHO_CLOCK_INTERNAL		0
+#define ECHO_CLOCK_WORD			1
+#define ECHO_CLOCK_SUPER		2
+#define ECHO_CLOCK_SPDIF		3
+#define ECHO_CLOCK_ADAT			4
+#define ECHO_CLOCK_ESYNC		5
+#define ECHO_CLOCK_ESYNC96		6
+#define ECHO_CLOCK_MTC			7
+#define ECHO_CLOCK_NUMBER		8
+#define ECHO_CLOCKS			0xffff
+
+/*
+ * Clock bit numbers - used to report capabilities and whatever clocks
+ * are being detected dynamically.
+ */
+#define ECHO_CLOCK_BIT_INTERNAL		(1 << ECHO_CLOCK_INTERNAL)
+#define ECHO_CLOCK_BIT_WORD		(1 << ECHO_CLOCK_WORD)
+#define ECHO_CLOCK_BIT_SUPER		(1 << ECHO_CLOCK_SUPER)
+#define ECHO_CLOCK_BIT_SPDIF		(1 << ECHO_CLOCK_SPDIF)
+#define ECHO_CLOCK_BIT_ADAT		(1 << ECHO_CLOCK_ADAT)
+#define ECHO_CLOCK_BIT_ESYNC		(1 << ECHO_CLOCK_ESYNC)
+#define ECHO_CLOCK_BIT_ESYNC96		(1 << ECHO_CLOCK_ESYNC96)
+#define ECHO_CLOCK_BIT_MTC		(1<<ECHO_CLOCK_MTC)
+
+
+/***************************************************************************
+
+   Digital modes
+
+****************************************************************************/
+
+/*
+ * Digital modes for Mona, Layla24, and Gina24
+ */
+#define DIGITAL_MODE_NONE			0xFF
+#define DIGITAL_MODE_SPDIF_RCA			0
+#define DIGITAL_MODE_SPDIF_OPTICAL		1
+#define DIGITAL_MODE_ADAT			2
+#define DIGITAL_MODE_SPDIF_CDROM		3
+#define DIGITAL_MODES				4
+
+/*
+ * Digital mode capability masks
+ */
+#define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA	(1 << DIGITAL_MODE_SPDIF_RCA)
+#define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL	(1 << DIGITAL_MODE_SPDIF_OPTICAL)
+#define ECHOCAPS_HAS_DIGITAL_MODE_ADAT		(1 << DIGITAL_MODE_ADAT)
+#define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_CDROM	(1 << DIGITAL_MODE_SPDIF_CDROM)
+
+
+#define EXT_3GBOX_NC			0x01	/* 3G box not connected */
+#define EXT_3GBOX_NOT_SET		0x02	/* 3G box not detected yet */
+
+
+#define ECHOGAIN_MUTED		(-128)	/* Minimum possible gain */
+#define ECHOGAIN_MINOUT		(-128)	/* Min output gain (dB) */
+#define ECHOGAIN_MAXOUT		(6)	/* Max output gain (dB) */
+#define ECHOGAIN_MININP		(-50)	/* Min input gain (0.5 dB) */
+#define ECHOGAIN_MAXINP		(50)	/* Max input gain (0.5 dB) */
+
+#define PIPE_STATE_STOPPED	0	/* Pipe has been reset */
+#define PIPE_STATE_PAUSED	1	/* Pipe has been stopped */
+#define PIPE_STATE_STARTED	2	/* Pipe has been started */
+#define PIPE_STATE_PENDING	3	/* Pipe has pending start */
+
+
+
+struct audiopipe {
+	volatile __le32 *dma_counter;	/* Commpage register that contains
+					 * the current dma position
+					 * (lower 32 bits only)
+					 */
+	u32 last_period;                /* Counter position last time a
+					 * period elapsed
+					 */
+	u32 last_counter;		/* Used exclusively by pcm_pointer
+					 * under PCM core locks.
+					 * The last position, which is used
+					 * to compute...
+					 */
+	u32 position;			/* ...the number of bytes tranferred
+					 * by the DMA engine, modulo the
+					 * buffer size
+					 */
+	short index;			/* Index of the first channel or <0
+					 * if hw is not configured yet
+					 */
+	short interleave;
+	struct snd_dma_buffer sgpage;	/* Room for the scatter-gather list */
+	struct snd_pcm_hardware hw;
+	struct snd_pcm_hw_constraint_list constr;
+	short sglist_head;
+	char state;			/* pipe state */
+};
+
+
+struct audioformat {
+	u8 interleave;			/* How the data is arranged in memory:
+					 * mono = 1, stereo = 2, ...
+					 */
+	u8 bits_per_sample;		/* 8, 16, 24, 32 (24 bits left aligned) */
+	char mono_to_stereo;		/* Only used if interleave is 1 and
+					 * if this is an output pipe.
+					 */
+	char data_are_bigendian;	/* 1 = big endian, 0 = little endian */
+};
+
+
+struct echoaudio {
+	spinlock_t lock;
+	struct snd_pcm_substream *substream[DSP_MAXPIPES];
+	struct mutex mode_mutex;
+	u16 num_digital_modes, digital_mode_list[6];
+	u16 num_clock_sources, clock_source_list[10];
+	unsigned int opencount;  /* protected by mode_mutex */
+	struct snd_kcontrol *clock_src_ctl;
+	struct snd_pcm *analog_pcm, *digital_pcm;
+	struct snd_card *card;
+	const char *card_name;
+	struct pci_dev *pci;
+	unsigned long dsp_registers_phys;
+	struct resource *iores;
+	struct snd_dma_buffer commpage_dma_buf;
+	int irq;
+#ifdef ECHOCARD_HAS_MIDI
+	struct snd_rawmidi *rmidi;
+	struct snd_rawmidi_substream *midi_in, *midi_out;
+#endif
+	struct timer_list timer;
+	char tinuse;				/* Timer in use */
+	char midi_full;				/* MIDI output buffer is full */
+	char can_set_rate;                      /* protected by mode_mutex */
+	char rate_set;                          /* protected by mode_mutex */
+
+	/* This stuff is used mainly by the lowlevel code */
+	struct comm_page *comm_page;	/* Virtual address of the memory
+					 * seen by DSP
+					 */
+	u32 pipe_alloc_mask;		/* Bitmask of allocated pipes */
+	u32 pipe_cyclic_mask;		/* Bitmask of pipes with cyclic
+					 * buffers
+					 */
+	u32 sample_rate;		/* Card sample rate in Hz */
+	u8 digital_mode;		/* Current digital mode
+					 * (see DIGITAL_MODE_*)
+					 */
+	u8 spdif_status;		/* Gina20, Darla20, Darla24 - only */
+	u8 clock_state;			/* Gina20, Darla20, Darla24 - only */
+	u8 input_clock;			/* Currently selected sample clock
+					 * source
+					 */
+	u8 output_clock;		/* Layla20 only */
+	char meters_enabled;		/* VU-meters status */
+	char asic_loaded;		/* Set true when ASIC loaded */
+	char bad_board;			/* Set true if DSP won't load */
+	char professional_spdif;	/* 0 = consumer; 1 = professional */
+	char non_audio_spdif;		/* 3G - only */
+	char digital_in_automute;	/* Gina24, Layla24, Mona - only */
+	char has_phantom_power;
+	char hasnt_input_nominal_level;	/* Gina3G */
+	char phantom_power;		/* Gina3G - only */
+	char has_midi;
+	char midi_input_enabled;
+
+#ifdef ECHOCARD_ECHO3G
+	/* External module -dependent pipe and bus indexes */
+	char px_digital_out, px_analog_in, px_digital_in, px_num;
+	char bx_digital_out, bx_analog_in, bx_digital_in, bx_num;
+#endif
+
+	char nominal_level[ECHO_MAXAUDIOPIPES];	/* True == -10dBV
+						 * False == +4dBu */
+	s8 input_gain[ECHO_MAXAUDIOINPUTS];	/* Input level -50..+50
+						 * unit is 0.5dB */
+	s8 output_gain[ECHO_MAXAUDIOOUTPUTS];	/* Output level -128..+6 dB
+						 * (-128=muted) */
+	s8 monitor_gain[ECHO_MAXAUDIOOUTPUTS][ECHO_MAXAUDIOINPUTS];
+		/* -128..+6 dB */
+	s8 vmixer_gain[ECHO_MAXAUDIOOUTPUTS][ECHO_MAXAUDIOOUTPUTS];
+		/* -128..+6 dB */
+
+	u16 digital_modes;		/* Bitmask of supported modes
+					 * (see ECHOCAPS_HAS_DIGITAL_MODE_*) */
+	u16 input_clock_types;		/* Suppoted input clock types */
+	u16 output_clock_types;		/* Suppoted output clock types -
+					 * Layla20 only */
+	u16 device_id, subdevice_id;
+	u16 *dsp_code;			/* Current DSP code loaded,
+					 * NULL if nothing loaded */
+	short dsp_code_to_load;		/* DSP code to load */
+	short asic_code;		/* Current ASIC code */
+	u32 comm_page_phys;			/* Physical address of the
+						 * memory seen by DSP */
+	u32 __iomem *dsp_registers;		/* DSP's register base */
+	u32 active_mask;			/* Chs. active mask or
+						 * punks out */
+#ifdef CONFIG_PM_SLEEP
+	const struct firmware *fw_cache[8];	/* Cached firmwares */
+#endif
+
+#ifdef ECHOCARD_HAS_MIDI
+	u16 mtc_state;				/* State for MIDI input parsing state machine */
+	u8 midi_buffer[MIDI_IN_BUFFER_SIZE];
+#endif
+};
+
+
+static int init_dsp_comm_page(struct echoaudio *chip);
+static int init_line_levels(struct echoaudio *chip);
+static int free_pipes(struct echoaudio *chip, struct audiopipe *pipe);
+static int load_firmware(struct echoaudio *chip);
+static int wait_handshake(struct echoaudio *chip);
+static int send_vector(struct echoaudio *chip, u32 command);
+static int get_firmware(const struct firmware **fw_entry,
+			struct echoaudio *chip, const short fw_index);
+static void free_firmware(const struct firmware *fw_entry,
+			  struct echoaudio *chip);
+
+#ifdef ECHOCARD_HAS_MIDI
+static int enable_midi_input(struct echoaudio *chip, char enable);
+static void snd_echo_midi_output_trigger(
+			struct snd_rawmidi_substream *substream, int up);
+static int midi_service_irq(struct echoaudio *chip);
+static int snd_echo_midi_create(struct snd_card *card,
+				struct echoaudio *chip);
+#endif
+
+
+static inline void clear_handshake(struct echoaudio *chip)
+{
+	chip->comm_page->handshake = 0;
+}
+
+static inline u32 get_dsp_register(struct echoaudio *chip, u32 index)
+{
+	return readl(&chip->dsp_registers[index]);
+}
+
+static inline void set_dsp_register(struct echoaudio *chip, u32 index,
+				    u32 value)
+{
+	writel(value, &chip->dsp_registers[index]);
+}
+
+
+/* Pipe and bus indexes. PX_* and BX_* are defined as chip->px_* and chip->bx_*
+for 3G cards because they depend on the external box. They are integer
+constants for all other cards.
+Never use those defines directly, use the following functions instead. */
+
+static inline int px_digital_out(const struct echoaudio *chip)
+{
+	return PX_DIGITAL_OUT;
+}
+
+static inline int px_analog_in(const struct echoaudio *chip)
+{
+	return PX_ANALOG_IN;
+}
+
+static inline int px_digital_in(const struct echoaudio *chip)
+{
+	return PX_DIGITAL_IN;
+}
+
+static inline int px_num(const struct echoaudio *chip)
+{
+	return PX_NUM;
+}
+
+static inline int bx_digital_out(const struct echoaudio *chip)
+{
+	return BX_DIGITAL_OUT;
+}
+
+static inline int bx_analog_in(const struct echoaudio *chip)
+{
+	return BX_ANALOG_IN;
+}
+
+static inline int bx_digital_in(const struct echoaudio *chip)
+{
+	return BX_DIGITAL_IN;
+}
+
+static inline int bx_num(const struct echoaudio *chip)
+{
+	return BX_NUM;
+}
+
+static inline int num_pipes_out(const struct echoaudio *chip)
+{
+	return px_analog_in(chip);
+}
+
+static inline int num_pipes_in(const struct echoaudio *chip)
+{
+	return px_num(chip) - px_analog_in(chip);
+}
+
+static inline int num_busses_out(const struct echoaudio *chip)
+{
+	return bx_analog_in(chip);
+}
+
+static inline int num_busses_in(const struct echoaudio *chip)
+{
+	return bx_num(chip) - bx_analog_in(chip);
+}
+
+static inline int num_analog_busses_out(const struct echoaudio *chip)
+{
+	return bx_digital_out(chip);
+}
+
+static inline int num_analog_busses_in(const struct echoaudio *chip)
+{
+	return bx_digital_in(chip) - bx_analog_in(chip);
+}
+
+static inline int num_digital_busses_out(const struct echoaudio *chip)
+{
+	return num_busses_out(chip) - num_analog_busses_out(chip);
+}
+
+static inline int num_digital_busses_in(const struct echoaudio *chip)
+{
+	return num_busses_in(chip) - num_analog_busses_in(chip);
+}
+
+/* The monitor array is a one-dimensional array; compute the offset
+ * into the array */
+static inline int monitor_index(const struct echoaudio *chip, int out, int in)
+{
+	return out * num_busses_in(chip) + in;
+}
+
+#endif /* _ECHOAUDIO_H_ */
diff --git a/sound/pci/echoaudio/echoaudio_3g.c b/sound/pci/echoaudio/echoaudio_3g.c
new file mode 100644
index 000000000..cc3c79387
--- /dev/null
+++ b/sound/pci/echoaudio/echoaudio_3g.c
@@ -0,0 +1,433 @@
+/****************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+   *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+
+/* These functions are common for all "3G" cards */
+
+
+static int check_asic_status(struct echoaudio *chip)
+{
+	u32 box_status;
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	chip->comm_page->ext_box_status = cpu_to_le32(E3G_ASIC_NOT_LOADED);
+	chip->asic_loaded = false;
+	clear_handshake(chip);
+	send_vector(chip, DSP_VC_TEST_ASIC);
+
+	if (wait_handshake(chip)) {
+		chip->dsp_code = NULL;
+		return -EIO;
+	}
+
+	box_status = le32_to_cpu(chip->comm_page->ext_box_status);
+	dev_dbg(chip->card->dev, "box_status=%x\n", box_status);
+	if (box_status == E3G_ASIC_NOT_LOADED)
+		return -ENODEV;
+
+	chip->asic_loaded = true;
+	return box_status & E3G_BOX_TYPE_MASK;
+}
+
+
+
+static inline u32 get_frq_reg(struct echoaudio *chip)
+{
+	return le32_to_cpu(chip->comm_page->e3g_frq_register);
+}
+
+
+
+/* Most configuration of 3G cards is accomplished by writing the control
+register. write_control_reg sends the new control register value to the DSP. */
+static int write_control_reg(struct echoaudio *chip, u32 ctl, u32 frq,
+			     char force)
+{
+	__le32 ctl_reg, frq_reg;
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	dev_dbg(chip->card->dev,
+		"WriteControlReg: Setting 0x%x, 0x%x\n", ctl, frq);
+
+	ctl_reg = cpu_to_le32(ctl);
+	frq_reg = cpu_to_le32(frq);
+
+	if (ctl_reg != chip->comm_page->control_register ||
+	    frq_reg != chip->comm_page->e3g_frq_register || force) {
+		chip->comm_page->e3g_frq_register = frq_reg;
+		chip->comm_page->control_register = ctl_reg;
+		clear_handshake(chip);
+		return send_vector(chip, DSP_VC_WRITE_CONTROL_REG);
+	}
+
+	dev_dbg(chip->card->dev, "WriteControlReg: not written, no change\n");
+	return 0;
+}
+
+
+
+/* Set the digital mode - currently for Gina24, Layla24, Mona, 3G */
+static int set_digital_mode(struct echoaudio *chip, u8 mode)
+{
+	u8 previous_mode;
+	int err, i, o;
+
+	/* All audio channels must be closed before changing the digital mode */
+	if (snd_BUG_ON(chip->pipe_alloc_mask))
+		return -EAGAIN;
+
+	if (snd_BUG_ON(!(chip->digital_modes & (1 << mode))))
+		return -EINVAL;
+
+	previous_mode = chip->digital_mode;
+	err = dsp_set_digital_mode(chip, mode);
+
+	/* If we successfully changed the digital mode from or to ADAT,
+	 * then make sure all output, input and monitor levels are
+	 * updated by the DSP comm object. */
+	if (err >= 0 && previous_mode != mode &&
+	    (previous_mode == DIGITAL_MODE_ADAT || mode == DIGITAL_MODE_ADAT)) {
+		spin_lock_irq(&chip->lock);
+		for (o = 0; o < num_busses_out(chip); o++)
+			for (i = 0; i < num_busses_in(chip); i++)
+				set_monitor_gain(chip, o, i,
+						 chip->monitor_gain[o][i]);
+
+#ifdef ECHOCARD_HAS_INPUT_GAIN
+		for (i = 0; i < num_busses_in(chip); i++)
+			set_input_gain(chip, i, chip->input_gain[i]);
+		update_input_line_level(chip);
+#endif
+
+		for (o = 0; o < num_busses_out(chip); o++)
+			set_output_gain(chip, o, chip->output_gain[o]);
+		update_output_line_level(chip);
+		spin_unlock_irq(&chip->lock);
+	}
+
+	return err;
+}
+
+
+
+static u32 set_spdif_bits(struct echoaudio *chip, u32 control_reg, u32 rate)
+{
+	control_reg &= E3G_SPDIF_FORMAT_CLEAR_MASK;
+
+	switch (rate) {
+	case 32000 :
+		control_reg |= E3G_SPDIF_SAMPLE_RATE0 | E3G_SPDIF_SAMPLE_RATE1;
+		break;
+	case 44100 :
+		if (chip->professional_spdif)
+			control_reg |= E3G_SPDIF_SAMPLE_RATE0;
+		break;
+	case 48000 :
+		control_reg |= E3G_SPDIF_SAMPLE_RATE1;
+		break;
+	}
+
+	if (chip->professional_spdif)
+		control_reg |= E3G_SPDIF_PRO_MODE;
+
+	if (chip->non_audio_spdif)
+		control_reg |= E3G_SPDIF_NOT_AUDIO;
+
+	control_reg |= E3G_SPDIF_24_BIT | E3G_SPDIF_TWO_CHANNEL |
+		E3G_SPDIF_COPY_PERMIT;
+
+	return control_reg;
+}
+
+
+
+/* Set the S/PDIF output format */
+static int set_professional_spdif(struct echoaudio *chip, char prof)
+{
+	u32 control_reg;
+
+	control_reg = le32_to_cpu(chip->comm_page->control_register);
+	chip->professional_spdif = prof;
+	control_reg = set_spdif_bits(chip, control_reg, chip->sample_rate);
+	return write_control_reg(chip, control_reg, get_frq_reg(chip), 0);
+}
+
+
+
+/* detect_input_clocks() returns a bitmask consisting of all the input clocks
+currently connected to the hardware; this changes as the user connects and
+disconnects clock inputs. You should use this information to determine which
+clocks the user is allowed to select. */
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+	u32 clocks_from_dsp, clock_bits;
+
+	/* Map the DSP clock detect bits to the generic driver clock
+	 * detect bits */
+	clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+	clock_bits = ECHO_CLOCK_BIT_INTERNAL;
+
+	if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_WORD)
+		clock_bits |= ECHO_CLOCK_BIT_WORD;
+
+	switch(chip->digital_mode) {
+	case DIGITAL_MODE_SPDIF_RCA:
+	case DIGITAL_MODE_SPDIF_OPTICAL:
+		if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_SPDIF)
+			clock_bits |= ECHO_CLOCK_BIT_SPDIF;
+		break;
+	case DIGITAL_MODE_ADAT:
+		if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_ADAT)
+			clock_bits |= ECHO_CLOCK_BIT_ADAT;
+		break;
+	}
+
+	return clock_bits;
+}
+
+
+
+static int load_asic(struct echoaudio *chip)
+{
+	int box_type, err;
+
+	if (chip->asic_loaded)
+		return 0;
+
+	/* Give the DSP a few milliseconds to settle down */
+	mdelay(2);
+
+	err = load_asic_generic(chip, DSP_FNC_LOAD_3G_ASIC, FW_3G_ASIC);
+	if (err < 0)
+		return err;
+
+	chip->asic_code = FW_3G_ASIC;
+
+	/* Now give the new ASIC some time to set up */
+	msleep(1000);
+	/* See if it worked */
+	box_type = check_asic_status(chip);
+
+	/* Set up the control register if the load succeeded -
+	 * 48 kHz, internal clock, S/PDIF RCA mode */
+	if (box_type >= 0) {
+		err = write_control_reg(chip, E3G_48KHZ,
+					E3G_FREQ_REG_DEFAULT, true);
+		if (err < 0)
+			return err;
+	}
+
+	return box_type;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+	u32 control_reg, clock, base_rate, frq_reg;
+
+	/* Only set the clock for internal mode. */
+	if (chip->input_clock != ECHO_CLOCK_INTERNAL) {
+		dev_warn(chip->card->dev,
+			 "Cannot set sample rate - clock not set to CLK_CLOCKININTERNAL\n");
+		/* Save the rate anyhow */
+		chip->comm_page->sample_rate = cpu_to_le32(rate);
+		chip->sample_rate = rate;
+		set_input_clock(chip, chip->input_clock);
+		return 0;
+	}
+
+	if (snd_BUG_ON(rate >= 50000 &&
+		       chip->digital_mode == DIGITAL_MODE_ADAT))
+		return -EINVAL;
+
+	clock = 0;
+	control_reg = le32_to_cpu(chip->comm_page->control_register);
+	control_reg &= E3G_CLOCK_CLEAR_MASK;
+
+	switch (rate) {
+	case 96000:
+		clock = E3G_96KHZ;
+		break;
+	case 88200:
+		clock = E3G_88KHZ;
+		break;
+	case 48000:
+		clock = E3G_48KHZ;
+		break;
+	case 44100:
+		clock = E3G_44KHZ;
+		break;
+	case 32000:
+		clock = E3G_32KHZ;
+		break;
+	default:
+		clock = E3G_CONTINUOUS_CLOCK;
+		if (rate > 50000)
+			clock |= E3G_DOUBLE_SPEED_MODE;
+		break;
+	}
+
+	control_reg |= clock;
+	control_reg = set_spdif_bits(chip, control_reg, rate);
+
+	base_rate = rate;
+	if (base_rate > 50000)
+		base_rate /= 2;
+	if (base_rate < 32000)
+		base_rate = 32000;
+
+	frq_reg = E3G_MAGIC_NUMBER / base_rate - 2;
+	if (frq_reg > E3G_FREQ_REG_MAX)
+		frq_reg = E3G_FREQ_REG_MAX;
+
+	chip->comm_page->sample_rate = cpu_to_le32(rate);	/* ignored by the DSP */
+	chip->sample_rate = rate;
+	dev_dbg(chip->card->dev,
+		"SetSampleRate: %d clock %x\n", rate, control_reg);
+
+	/* Tell the DSP about it - DSP reads both control reg & freq reg */
+	return write_control_reg(chip, control_reg, frq_reg, 0);
+}
+
+
+
+/* Set the sample clock source to internal, S/PDIF, ADAT */
+static int set_input_clock(struct echoaudio *chip, u16 clock)
+{
+	u32 control_reg, clocks_from_dsp;
+
+
+	/* Mask off the clock select bits */
+	control_reg = le32_to_cpu(chip->comm_page->control_register) &
+		E3G_CLOCK_CLEAR_MASK;
+	clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+	switch (clock) {
+	case ECHO_CLOCK_INTERNAL:
+		chip->input_clock = ECHO_CLOCK_INTERNAL;
+		return set_sample_rate(chip, chip->sample_rate);
+	case ECHO_CLOCK_SPDIF:
+		if (chip->digital_mode == DIGITAL_MODE_ADAT)
+			return -EAGAIN;
+		control_reg |= E3G_SPDIF_CLOCK;
+		if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_SPDIF96)
+			control_reg |= E3G_DOUBLE_SPEED_MODE;
+		else
+			control_reg &= ~E3G_DOUBLE_SPEED_MODE;
+		break;
+	case ECHO_CLOCK_ADAT:
+		if (chip->digital_mode != DIGITAL_MODE_ADAT)
+			return -EAGAIN;
+		control_reg |= E3G_ADAT_CLOCK;
+		control_reg &= ~E3G_DOUBLE_SPEED_MODE;
+		break;
+	case ECHO_CLOCK_WORD:
+		control_reg |= E3G_WORD_CLOCK;
+		if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_WORD96)
+			control_reg |= E3G_DOUBLE_SPEED_MODE;
+		else
+			control_reg &= ~E3G_DOUBLE_SPEED_MODE;
+		break;
+	default:
+		dev_err(chip->card->dev,
+			"Input clock 0x%x not supported for Echo3G\n", clock);
+		return -EINVAL;
+	}
+
+	chip->input_clock = clock;
+	return write_control_reg(chip, control_reg, get_frq_reg(chip), 1);
+}
+
+
+
+static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode)
+{
+	u32 control_reg;
+	int err, incompatible_clock;
+
+	/* Set clock to "internal" if it's not compatible with the new mode */
+	incompatible_clock = false;
+	switch (mode) {
+	case DIGITAL_MODE_SPDIF_OPTICAL:
+	case DIGITAL_MODE_SPDIF_RCA:
+		if (chip->input_clock == ECHO_CLOCK_ADAT)
+			incompatible_clock = true;
+		break;
+	case DIGITAL_MODE_ADAT:
+		if (chip->input_clock == ECHO_CLOCK_SPDIF)
+			incompatible_clock = true;
+		break;
+	default:
+		dev_err(chip->card->dev,
+			"Digital mode not supported: %d\n", mode);
+		return -EINVAL;
+	}
+
+	spin_lock_irq(&chip->lock);
+
+	if (incompatible_clock) {
+		chip->sample_rate = 48000;
+		set_input_clock(chip, ECHO_CLOCK_INTERNAL);
+	}
+
+	/* Clear the current digital mode */
+	control_reg = le32_to_cpu(chip->comm_page->control_register);
+	control_reg &= E3G_DIGITAL_MODE_CLEAR_MASK;
+
+	/* Tweak the control reg */
+	switch (mode) {
+	case DIGITAL_MODE_SPDIF_OPTICAL:
+		control_reg |= E3G_SPDIF_OPTICAL_MODE;
+		break;
+	case DIGITAL_MODE_SPDIF_RCA:
+		/* E3G_SPDIF_OPTICAL_MODE bit cleared */
+		break;
+	case DIGITAL_MODE_ADAT:
+		control_reg |= E3G_ADAT_MODE;
+		control_reg &= ~E3G_DOUBLE_SPEED_MODE;	/* @@ useless */
+		break;
+	}
+
+	err = write_control_reg(chip, control_reg, get_frq_reg(chip), 1);
+	spin_unlock_irq(&chip->lock);
+	if (err < 0)
+		return err;
+	chip->digital_mode = mode;
+
+	dev_dbg(chip->card->dev, "set_digital_mode(%d)\n", chip->digital_mode);
+	return incompatible_clock;
+}
diff --git a/sound/pci/echoaudio/echoaudio_dsp.c b/sound/pci/echoaudio/echoaudio_dsp.c
new file mode 100644
index 000000000..d10d0e460
--- /dev/null
+++ b/sound/pci/echoaudio/echoaudio_dsp.c
@@ -0,0 +1,1152 @@
+/****************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+   *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+#if PAGE_SIZE < 4096
+#error PAGE_SIZE is < 4k
+#endif
+
+static int restore_dsp_rettings(struct echoaudio *chip);
+
+
+/* Some vector commands involve the DSP reading or writing data to and from the
+comm page; if you send one of these commands to the DSP, it will complete the
+command and then write a non-zero value to the Handshake field in the
+comm page.  This function waits for the handshake to show up. */
+static int wait_handshake(struct echoaudio *chip)
+{
+	int i;
+
+	/* Wait up to 20ms for the handshake from the DSP */
+	for (i = 0; i < HANDSHAKE_TIMEOUT; i++) {
+		/* Look for the handshake value */
+		barrier();
+		if (chip->comm_page->handshake) {
+			return 0;
+		}
+		udelay(1);
+	}
+
+	dev_err(chip->card->dev, "wait_handshake(): Timeout waiting for DSP\n");
+	return -EBUSY;
+}
+
+
+
+/* Much of the interaction between the DSP and the driver is done via vector
+commands; send_vector writes a vector command to the DSP.  Typically, this
+causes the DSP to read or write fields in the comm page.
+PCI posting is not required thanks to the handshake logic. */
+static int send_vector(struct echoaudio *chip, u32 command)
+{
+	int i;
+
+	wmb();	/* Flush all pending writes before sending the command */
+
+	/* Wait up to 100ms for the "vector busy" bit to be off */
+	for (i = 0; i < VECTOR_BUSY_TIMEOUT; i++) {
+		if (!(get_dsp_register(chip, CHI32_VECTOR_REG) &
+		      CHI32_VECTOR_BUSY)) {
+			set_dsp_register(chip, CHI32_VECTOR_REG, command);
+			/*if (i)  DE_ACT(("send_vector time: %d\n", i));*/
+			return 0;
+		}
+		udelay(1);
+	}
+
+	dev_err(chip->card->dev, "timeout on send_vector\n");
+	return -EBUSY;
+}
+
+
+
+/* write_dsp writes a 32-bit value to the DSP; this is used almost
+exclusively for loading the DSP. */
+static int write_dsp(struct echoaudio *chip, u32 data)
+{
+	u32 status, i;
+
+	for (i = 0; i < 10000000; i++) {	/* timeout = 10s */
+		status = get_dsp_register(chip, CHI32_STATUS_REG);
+		if ((status & CHI32_STATUS_HOST_WRITE_EMPTY) != 0) {
+			set_dsp_register(chip, CHI32_DATA_REG, data);
+			wmb();			/* write it immediately */
+			return 0;
+		}
+		udelay(1);
+		cond_resched();
+	}
+
+	chip->bad_board = true;		/* Set true until DSP re-loaded */
+	dev_dbg(chip->card->dev, "write_dsp: Set bad_board to true\n");
+	return -EIO;
+}
+
+
+
+/* read_dsp reads a 32-bit value from the DSP; this is used almost
+exclusively for loading the DSP and checking the status of the ASIC. */
+static int read_dsp(struct echoaudio *chip, u32 *data)
+{
+	u32 status, i;
+
+	for (i = 0; i < READ_DSP_TIMEOUT; i++) {
+		status = get_dsp_register(chip, CHI32_STATUS_REG);
+		if ((status & CHI32_STATUS_HOST_READ_FULL) != 0) {
+			*data = get_dsp_register(chip, CHI32_DATA_REG);
+			return 0;
+		}
+		udelay(1);
+		cond_resched();
+	}
+
+	chip->bad_board = true;		/* Set true until DSP re-loaded */
+	dev_err(chip->card->dev, "read_dsp: Set bad_board to true\n");
+	return -EIO;
+}
+
+
+
+/****************************************************************************
+	Firmware loading functions
+ ****************************************************************************/
+
+/* This function is used to read back the serial number from the DSP;
+this is triggered by the SET_COMMPAGE_ADDR command.
+Only some early Echogals products have serial numbers in the ROM;
+the serial number is not used, but you still need to do this as
+part of the DSP load process. */
+static int read_sn(struct echoaudio *chip)
+{
+	int i;
+	u32 sn[6];
+
+	for (i = 0; i < 5; i++) {
+		if (read_dsp(chip, &sn[i])) {
+			dev_err(chip->card->dev,
+				"Failed to read serial number\n");
+			return -EIO;
+		}
+	}
+	dev_dbg(chip->card->dev,
+		"Read serial number %08x %08x %08x %08x %08x\n",
+		 sn[0], sn[1], sn[2], sn[3], sn[4]);
+	return 0;
+}
+
+
+
+#ifndef ECHOCARD_HAS_ASIC
+/* This card has no ASIC, just return ok */
+static inline int check_asic_status(struct echoaudio *chip)
+{
+	chip->asic_loaded = true;
+	return 0;
+}
+
+#endif /* !ECHOCARD_HAS_ASIC */
+
+
+
+#ifdef ECHOCARD_HAS_ASIC
+
+/* Load ASIC code - done after the DSP is loaded */
+static int load_asic_generic(struct echoaudio *chip, u32 cmd, short asic)
+{
+	const struct firmware *fw;
+	int err;
+	u32 i, size;
+	u8 *code;
+
+	err = get_firmware(&fw, chip, asic);
+	if (err < 0) {
+		dev_warn(chip->card->dev, "Firmware not found !\n");
+		return err;
+	}
+
+	code = (u8 *)fw->data;
+	size = fw->size;
+
+	/* Send the "Here comes the ASIC" command */
+	if (write_dsp(chip, cmd) < 0)
+		goto la_error;
+
+	/* Write length of ASIC file in bytes */
+	if (write_dsp(chip, size) < 0)
+		goto la_error;
+
+	for (i = 0; i < size; i++) {
+		if (write_dsp(chip, code[i]) < 0)
+			goto la_error;
+	}
+
+	free_firmware(fw, chip);
+	return 0;
+
+la_error:
+	dev_err(chip->card->dev, "failed on write_dsp\n");
+	free_firmware(fw, chip);
+	return -EIO;
+}
+
+#endif /* ECHOCARD_HAS_ASIC */
+
+
+
+#ifdef DSP_56361
+
+/* Install the resident loader for 56361 DSPs;  The resident loader is on
+the EPROM on the board for 56301 DSP. The resident loader is a tiny little
+program that is used to load the real DSP code. */
+static int install_resident_loader(struct echoaudio *chip)
+{
+	u32 address;
+	int index, words, i;
+	u16 *code;
+	u32 status;
+	const struct firmware *fw;
+
+	/* 56361 cards only!  This check is required by the old 56301-based
+	Mona and Gina24 */
+	if (chip->device_id != DEVICE_ID_56361)
+		return 0;
+
+	/* Look to see if the resident loader is present.  If the resident
+	loader is already installed, host flag 5 will be on. */
+	status = get_dsp_register(chip, CHI32_STATUS_REG);
+	if (status & CHI32_STATUS_REG_HF5) {
+		dev_dbg(chip->card->dev,
+			"Resident loader already installed; status is 0x%x\n",
+			 status);
+		return 0;
+	}
+
+	i = get_firmware(&fw, chip, FW_361_LOADER);
+	if (i < 0) {
+		dev_warn(chip->card->dev, "Firmware not found !\n");
+		return i;
+	}
+
+	/* The DSP code is an array of 16 bit words.  The array is divided up
+	into sections.  The first word of each section is the size in words,
+	followed by the section type.
+	Since DSP addresses and data are 24 bits wide, they each take up two
+	16 bit words in the array.
+	This is a lot like the other loader loop, but it's not a loop, you
+	don't write the memory type, and you don't write a zero at the end. */
+
+	/* Set DSP format bits for 24 bit mode */
+	set_dsp_register(chip, CHI32_CONTROL_REG,
+			 get_dsp_register(chip, CHI32_CONTROL_REG) | 0x900);
+
+	code = (u16 *)fw->data;
+
+	/* Skip the header section; the first word in the array is the size
+	of the first section, so the first real section of code is pointed
+	to by Code[0]. */
+	index = code[0];
+
+	/* Skip the section size, LRS block type, and DSP memory type */
+	index += 3;
+
+	/* Get the number of DSP words to write */
+	words = code[index++];
+
+	/* Get the DSP address for this block; 24 bits, so build from two words */
+	address = ((u32)code[index] << 16) + code[index + 1];
+	index += 2;
+
+	/* Write the count to the DSP */
+	if (write_dsp(chip, words)) {
+		dev_err(chip->card->dev,
+			"install_resident_loader: Failed to write word count!\n");
+		goto irl_error;
+	}
+	/* Write the DSP address */
+	if (write_dsp(chip, address)) {
+		dev_err(chip->card->dev,
+			"install_resident_loader: Failed to write DSP address!\n");
+		goto irl_error;
+	}
+	/* Write out this block of code to the DSP */
+	for (i = 0; i < words; i++) {
+		u32 data;
+
+		data = ((u32)code[index] << 16) + code[index + 1];
+		if (write_dsp(chip, data)) {
+			dev_err(chip->card->dev,
+				"install_resident_loader: Failed to write DSP code\n");
+			goto irl_error;
+		}
+		index += 2;
+	}
+
+	/* Wait for flag 5 to come up */
+	for (i = 0; i < 200; i++) {	/* Timeout is 50us * 200 = 10ms */
+		udelay(50);
+		status = get_dsp_register(chip, CHI32_STATUS_REG);
+		if (status & CHI32_STATUS_REG_HF5)
+			break;
+	}
+
+	if (i == 200) {
+		dev_err(chip->card->dev, "Resident loader failed to set HF5\n");
+		goto irl_error;
+	}
+
+	dev_dbg(chip->card->dev, "Resident loader successfully installed\n");
+	free_firmware(fw, chip);
+	return 0;
+
+irl_error:
+	free_firmware(fw, chip);
+	return -EIO;
+}
+
+#endif /* DSP_56361 */
+
+
+static int load_dsp(struct echoaudio *chip, u16 *code)
+{
+	u32 address, data;
+	int index, words, i;
+
+	if (chip->dsp_code == code) {
+		dev_warn(chip->card->dev, "DSP is already loaded!\n");
+		return 0;
+	}
+	chip->bad_board = true;		/* Set true until DSP loaded */
+	chip->dsp_code = NULL;		/* Current DSP code not loaded */
+	chip->asic_loaded = false;	/* Loading the DSP code will reset the ASIC */
+
+	dev_dbg(chip->card->dev, "load_dsp: Set bad_board to true\n");
+
+	/* If this board requires a resident loader, install it. */
+#ifdef DSP_56361
+	if ((i = install_resident_loader(chip)) < 0)
+		return i;
+#endif
+
+	/* Send software reset command */
+	if (send_vector(chip, DSP_VC_RESET) < 0) {
+		dev_err(chip->card->dev,
+			"LoadDsp: send_vector DSP_VC_RESET failed, Critical Failure\n");
+		return -EIO;
+	}
+	/* Delay 10us */
+	udelay(10);
+
+	/* Wait 10ms for HF3 to indicate that software reset is complete */
+	for (i = 0; i < 1000; i++) {	/* Timeout is 10us * 1000 = 10ms */
+		if (get_dsp_register(chip, CHI32_STATUS_REG) &
+		    CHI32_STATUS_REG_HF3)
+			break;
+		udelay(10);
+	}
+
+	if (i == 1000) {
+		dev_err(chip->card->dev,
+			"load_dsp: Timeout waiting for CHI32_STATUS_REG_HF3\n");
+		return -EIO;
+	}
+
+	/* Set DSP format bits for 24 bit mode now that soft reset is done */
+	set_dsp_register(chip, CHI32_CONTROL_REG,
+			 get_dsp_register(chip, CHI32_CONTROL_REG) | 0x900);
+
+	/* Main loader loop */
+
+	index = code[0];
+	for (;;) {
+		int block_type, mem_type;
+
+		/* Total Block Size */
+		index++;
+
+		/* Block Type */
+		block_type = code[index];
+		if (block_type == 4)	/* We're finished */
+			break;
+
+		index++;
+
+		/* Memory Type  P=0,X=1,Y=2 */
+		mem_type = code[index++];
+
+		/* Block Code Size */
+		words = code[index++];
+		if (words == 0)		/* We're finished */
+			break;
+
+		/* Start Address */
+		address = ((u32)code[index] << 16) + code[index + 1];
+		index += 2;
+
+		if (write_dsp(chip, words) < 0) {
+			dev_err(chip->card->dev,
+				"load_dsp: failed to write number of DSP words\n");
+			return -EIO;
+		}
+		if (write_dsp(chip, address) < 0) {
+			dev_err(chip->card->dev,
+				"load_dsp: failed to write DSP address\n");
+			return -EIO;
+		}
+		if (write_dsp(chip, mem_type) < 0) {
+			dev_err(chip->card->dev,
+				"load_dsp: failed to write DSP memory type\n");
+			return -EIO;
+		}
+		/* Code */
+		for (i = 0; i < words; i++, index+=2) {
+			data = ((u32)code[index] << 16) + code[index + 1];
+			if (write_dsp(chip, data) < 0) {
+				dev_err(chip->card->dev,
+					"load_dsp: failed to write DSP data\n");
+				return -EIO;
+			}
+		}
+	}
+
+	if (write_dsp(chip, 0) < 0) {	/* We're done!!! */
+		dev_err(chip->card->dev,
+			"load_dsp: Failed to write final zero\n");
+		return -EIO;
+	}
+	udelay(10);
+
+	for (i = 0; i < 5000; i++) {	/* Timeout is 100us * 5000 = 500ms */
+		/* Wait for flag 4 - indicates that the DSP loaded OK */
+		if (get_dsp_register(chip, CHI32_STATUS_REG) &
+		    CHI32_STATUS_REG_HF4) {
+			set_dsp_register(chip, CHI32_CONTROL_REG,
+					 get_dsp_register(chip, CHI32_CONTROL_REG) & ~0x1b00);
+
+			if (write_dsp(chip, DSP_FNC_SET_COMMPAGE_ADDR) < 0) {
+				dev_err(chip->card->dev,
+					"load_dsp: Failed to write DSP_FNC_SET_COMMPAGE_ADDR\n");
+				return -EIO;
+			}
+
+			if (write_dsp(chip, chip->comm_page_phys) < 0) {
+				dev_err(chip->card->dev,
+					"load_dsp: Failed to write comm page address\n");
+				return -EIO;
+			}
+
+			/* Get the serial number via slave mode.
+			This is triggered by the SET_COMMPAGE_ADDR command.
+			We don't actually use the serial number but we have to
+			get it as part of the DSP init voodoo. */
+			if (read_sn(chip) < 0) {
+				dev_err(chip->card->dev,
+					"load_dsp: Failed to read serial number\n");
+				return -EIO;
+			}
+
+			chip->dsp_code = code;		/* Show which DSP code loaded */
+			chip->bad_board = false;	/* DSP OK */
+			return 0;
+		}
+		udelay(100);
+	}
+
+	dev_err(chip->card->dev,
+		"load_dsp: DSP load timed out waiting for HF4\n");
+	return -EIO;
+}
+
+
+
+/* load_firmware takes care of loading the DSP and any ASIC code. */
+static int load_firmware(struct echoaudio *chip)
+{
+	const struct firmware *fw;
+	int box_type, err;
+
+	if (snd_BUG_ON(!chip->comm_page))
+		return -EPERM;
+
+	/* See if the ASIC is present and working - only if the DSP is already loaded */
+	if (chip->dsp_code) {
+		if ((box_type = check_asic_status(chip)) >= 0)
+			return box_type;
+		/* ASIC check failed; force the DSP to reload */
+		chip->dsp_code = NULL;
+	}
+
+	err = get_firmware(&fw, chip, chip->dsp_code_to_load);
+	if (err < 0)
+		return err;
+	err = load_dsp(chip, (u16 *)fw->data);
+	free_firmware(fw, chip);
+	if (err < 0)
+		return err;
+
+	if ((box_type = load_asic(chip)) < 0)
+		return box_type;	/* error */
+
+	return box_type;
+}
+
+
+
+/****************************************************************************
+	Mixer functions
+ ****************************************************************************/
+
+#if defined(ECHOCARD_HAS_INPUT_NOMINAL_LEVEL) || \
+	defined(ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL)
+
+/* Set the nominal level for an input or output bus (true = -10dBV, false = +4dBu) */
+static int set_nominal_level(struct echoaudio *chip, u16 index, char consumer)
+{
+	if (snd_BUG_ON(index >= num_busses_out(chip) + num_busses_in(chip)))
+		return -EINVAL;
+
+	/* Wait for the handshake (OK even if ASIC is not loaded) */
+	if (wait_handshake(chip))
+		return -EIO;
+
+	chip->nominal_level[index] = consumer;
+
+	if (consumer)
+		chip->comm_page->nominal_level_mask |= cpu_to_le32(1 << index);
+	else
+		chip->comm_page->nominal_level_mask &= ~cpu_to_le32(1 << index);
+
+	return 0;
+}
+
+#endif /* ECHOCARD_HAS_*_NOMINAL_LEVEL */
+
+
+
+/* Set the gain for a single physical output channel (dB). */
+static int set_output_gain(struct echoaudio *chip, u16 channel, s8 gain)
+{
+	if (snd_BUG_ON(channel >= num_busses_out(chip)))
+		return -EINVAL;
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	/* Save the new value */
+	chip->output_gain[channel] = gain;
+	chip->comm_page->line_out_level[channel] = gain;
+	return 0;
+}
+
+
+
+#ifdef ECHOCARD_HAS_MONITOR
+/* Set the monitor level from an input bus to an output bus. */
+static int set_monitor_gain(struct echoaudio *chip, u16 output, u16 input,
+			    s8 gain)
+{
+	if (snd_BUG_ON(output >= num_busses_out(chip) ||
+		    input >= num_busses_in(chip)))
+		return -EINVAL;
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	chip->monitor_gain[output][input] = gain;
+	chip->comm_page->monitors[monitor_index(chip, output, input)] = gain;
+	return 0;
+}
+#endif /* ECHOCARD_HAS_MONITOR */
+
+
+/* Tell the DSP to read and update output, nominal & monitor levels in comm page. */
+static int update_output_line_level(struct echoaudio *chip)
+{
+	if (wait_handshake(chip))
+		return -EIO;
+	clear_handshake(chip);
+	return send_vector(chip, DSP_VC_UPDATE_OUTVOL);
+}
+
+
+
+/* Tell the DSP to read and update input levels in comm page */
+static int update_input_line_level(struct echoaudio *chip)
+{
+	if (wait_handshake(chip))
+		return -EIO;
+	clear_handshake(chip);
+	return send_vector(chip, DSP_VC_UPDATE_INGAIN);
+}
+
+
+
+/* set_meters_on turns the meters on or off.  If meters are turned on, the DSP
+will write the meter and clock detect values to the comm page at about 30Hz */
+static void set_meters_on(struct echoaudio *chip, char on)
+{
+	if (on && !chip->meters_enabled) {
+		send_vector(chip, DSP_VC_METERS_ON);
+		chip->meters_enabled = 1;
+	} else if (!on && chip->meters_enabled) {
+		send_vector(chip, DSP_VC_METERS_OFF);
+		chip->meters_enabled = 0;
+		memset((s8 *)chip->comm_page->vu_meter, ECHOGAIN_MUTED,
+		       DSP_MAXPIPES);
+		memset((s8 *)chip->comm_page->peak_meter, ECHOGAIN_MUTED,
+		       DSP_MAXPIPES);
+	}
+}
+
+
+
+/* Fill out an the given array using the current values in the comm page.
+Meters are written in the comm page by the DSP in this order:
+ Output busses
+ Input busses
+ Output pipes (vmixer cards only)
+
+This function assumes there are no more than 16 in/out busses or pipes
+Meters is an array [3][16][2] of long. */
+static void get_audio_meters(struct echoaudio *chip, long *meters)
+{
+	unsigned int i, m, n;
+
+	for (i = 0 ; i < 96; i++)
+		meters[i] = 0;
+
+	for (m = 0, n = 0, i = 0; i < num_busses_out(chip); i++, m++) {
+		meters[n++] = chip->comm_page->vu_meter[m];
+		meters[n++] = chip->comm_page->peak_meter[m];
+	}
+
+#ifdef ECHOCARD_ECHO3G
+	m = E3G_MAX_OUTPUTS;	/* Skip unused meters */
+#endif
+
+	for (n = 32, i = 0; i < num_busses_in(chip); i++, m++) {
+		meters[n++] = chip->comm_page->vu_meter[m];
+		meters[n++] = chip->comm_page->peak_meter[m];
+	}
+#ifdef ECHOCARD_HAS_VMIXER
+	for (n = 64, i = 0; i < num_pipes_out(chip); i++, m++) {
+		meters[n++] = chip->comm_page->vu_meter[m];
+		meters[n++] = chip->comm_page->peak_meter[m];
+	}
+#endif
+}
+
+
+
+static int restore_dsp_rettings(struct echoaudio *chip)
+{
+	int i, o, err;
+
+	if ((err = check_asic_status(chip)) < 0)
+		return err;
+
+	/* Gina20/Darla20 only. Should be harmless for other cards. */
+	chip->comm_page->gd_clock_state = GD_CLOCK_UNDEF;
+	chip->comm_page->gd_spdif_status = GD_SPDIF_STATUS_UNDEF;
+	chip->comm_page->handshake = cpu_to_le32(0xffffffff);
+
+	/* Restore output busses */
+	for (i = 0; i < num_busses_out(chip); i++) {
+		err = set_output_gain(chip, i, chip->output_gain[i]);
+		if (err < 0)
+			return err;
+	}
+
+#ifdef ECHOCARD_HAS_VMIXER
+	for (i = 0; i < num_pipes_out(chip); i++)
+		for (o = 0; o < num_busses_out(chip); o++) {
+			err = set_vmixer_gain(chip, o, i,
+						chip->vmixer_gain[o][i]);
+			if (err < 0)
+				return err;
+		}
+	if (update_vmixer_level(chip) < 0)
+		return -EIO;
+#endif /* ECHOCARD_HAS_VMIXER */
+
+#ifdef ECHOCARD_HAS_MONITOR
+	for (o = 0; o < num_busses_out(chip); o++)
+		for (i = 0; i < num_busses_in(chip); i++) {
+			err = set_monitor_gain(chip, o, i,
+						chip->monitor_gain[o][i]);
+			if (err < 0)
+				return err;
+		}
+#endif /* ECHOCARD_HAS_MONITOR */
+
+#ifdef ECHOCARD_HAS_INPUT_GAIN
+	for (i = 0; i < num_busses_in(chip); i++) {
+		err = set_input_gain(chip, i, chip->input_gain[i]);
+		if (err < 0)
+			return err;
+	}
+#endif /* ECHOCARD_HAS_INPUT_GAIN */
+
+	err = update_output_line_level(chip);
+	if (err < 0)
+		return err;
+
+	err = update_input_line_level(chip);
+	if (err < 0)
+		return err;
+
+	err = set_sample_rate(chip, chip->sample_rate);
+	if (err < 0)
+		return err;
+
+	if (chip->meters_enabled) {
+		err = send_vector(chip, DSP_VC_METERS_ON);
+		if (err < 0)
+			return err;
+	}
+
+#ifdef ECHOCARD_HAS_DIGITAL_MODE_SWITCH
+	if (set_digital_mode(chip, chip->digital_mode) < 0)
+		return -EIO;
+#endif
+
+#ifdef ECHOCARD_HAS_DIGITAL_IO
+	if (set_professional_spdif(chip, chip->professional_spdif) < 0)
+		return -EIO;
+#endif
+
+#ifdef ECHOCARD_HAS_PHANTOM_POWER
+	if (set_phantom_power(chip, chip->phantom_power) < 0)
+		return -EIO;
+#endif
+
+#ifdef ECHOCARD_HAS_EXTERNAL_CLOCK
+	/* set_input_clock() also restores automute setting */
+	if (set_input_clock(chip, chip->input_clock) < 0)
+		return -EIO;
+#endif
+
+#ifdef ECHOCARD_HAS_OUTPUT_CLOCK_SWITCH
+	if (set_output_clock(chip, chip->output_clock) < 0)
+		return -EIO;
+#endif
+
+	if (wait_handshake(chip) < 0)
+		return -EIO;
+	clear_handshake(chip);
+	if (send_vector(chip, DSP_VC_UPDATE_FLAGS) < 0)
+		return -EIO;
+
+	return 0;
+}
+
+
+
+/****************************************************************************
+	Transport functions
+ ****************************************************************************/
+
+/* set_audio_format() sets the format of the audio data in host memory for
+this pipe.  Note that _MS_ (mono-to-stereo) playback modes are not used by ALSA
+but they are here because they are just mono while capturing */
+static void set_audio_format(struct echoaudio *chip, u16 pipe_index,
+			     const struct audioformat *format)
+{
+	u16 dsp_format;
+
+	dsp_format = DSP_AUDIOFORM_SS_16LE;
+
+	/* Look for super-interleave (no big-endian and 8 bits) */
+	if (format->interleave > 2) {
+		switch (format->bits_per_sample) {
+		case 16:
+			dsp_format = DSP_AUDIOFORM_SUPER_INTERLEAVE_16LE;
+			break;
+		case 24:
+			dsp_format = DSP_AUDIOFORM_SUPER_INTERLEAVE_24LE;
+			break;
+		case 32:
+			dsp_format = DSP_AUDIOFORM_SUPER_INTERLEAVE_32LE;
+			break;
+		}
+		dsp_format |= format->interleave;
+	} else if (format->data_are_bigendian) {
+		/* For big-endian data, only 32 bit samples are supported */
+		switch (format->interleave) {
+		case 1:
+			dsp_format = DSP_AUDIOFORM_MM_32BE;
+			break;
+#ifdef ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+		case 2:
+			dsp_format = DSP_AUDIOFORM_SS_32BE;
+			break;
+#endif
+		}
+	} else if (format->interleave == 1 &&
+		   format->bits_per_sample == 32 && !format->mono_to_stereo) {
+		/* 32 bit little-endian mono->mono case */
+		dsp_format = DSP_AUDIOFORM_MM_32LE;
+	} else {
+		/* Handle the other little-endian formats */
+		switch (format->bits_per_sample) {
+		case 8:
+			if (format->interleave == 2)
+				dsp_format = DSP_AUDIOFORM_SS_8;
+			else
+				dsp_format = DSP_AUDIOFORM_MS_8;
+			break;
+		default:
+		case 16:
+			if (format->interleave == 2)
+				dsp_format = DSP_AUDIOFORM_SS_16LE;
+			else
+				dsp_format = DSP_AUDIOFORM_MS_16LE;
+			break;
+		case 24:
+			if (format->interleave == 2)
+				dsp_format = DSP_AUDIOFORM_SS_24LE;
+			else
+				dsp_format = DSP_AUDIOFORM_MS_24LE;
+			break;
+		case 32:
+			if (format->interleave == 2)
+				dsp_format = DSP_AUDIOFORM_SS_32LE;
+			else
+				dsp_format = DSP_AUDIOFORM_MS_32LE;
+			break;
+		}
+	}
+	dev_dbg(chip->card->dev,
+		 "set_audio_format[%d] = %x\n", pipe_index, dsp_format);
+	chip->comm_page->audio_format[pipe_index] = cpu_to_le16(dsp_format);
+}
+
+
+
+/* start_transport starts transport for a set of pipes.
+The bits 1 in channel_mask specify what pipes to start. Only the bit of the
+first channel must be set, regardless its interleave.
+Same thing for pause_ and stop_ -trasport below. */
+static int start_transport(struct echoaudio *chip, u32 channel_mask,
+			   u32 cyclic_mask)
+{
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	chip->comm_page->cmd_start |= cpu_to_le32(channel_mask);
+
+	if (chip->comm_page->cmd_start) {
+		clear_handshake(chip);
+		send_vector(chip, DSP_VC_START_TRANSFER);
+		if (wait_handshake(chip))
+			return -EIO;
+		/* Keep track of which pipes are transporting */
+		chip->active_mask |= channel_mask;
+		chip->comm_page->cmd_start = 0;
+		return 0;
+	}
+
+	dev_err(chip->card->dev, "start_transport: No pipes to start!\n");
+	return -EINVAL;
+}
+
+
+
+static int pause_transport(struct echoaudio *chip, u32 channel_mask)
+{
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	chip->comm_page->cmd_stop |= cpu_to_le32(channel_mask);
+	chip->comm_page->cmd_reset = 0;
+	if (chip->comm_page->cmd_stop) {
+		clear_handshake(chip);
+		send_vector(chip, DSP_VC_STOP_TRANSFER);
+		if (wait_handshake(chip))
+			return -EIO;
+		/* Keep track of which pipes are transporting */
+		chip->active_mask &= ~channel_mask;
+		chip->comm_page->cmd_stop = 0;
+		chip->comm_page->cmd_reset = 0;
+		return 0;
+	}
+
+	dev_dbg(chip->card->dev, "pause_transport: No pipes to stop!\n");
+	return 0;
+}
+
+
+
+static int stop_transport(struct echoaudio *chip, u32 channel_mask)
+{
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	chip->comm_page->cmd_stop |= cpu_to_le32(channel_mask);
+	chip->comm_page->cmd_reset |= cpu_to_le32(channel_mask);
+	if (chip->comm_page->cmd_reset) {
+		clear_handshake(chip);
+		send_vector(chip, DSP_VC_STOP_TRANSFER);
+		if (wait_handshake(chip))
+			return -EIO;
+		/* Keep track of which pipes are transporting */
+		chip->active_mask &= ~channel_mask;
+		chip->comm_page->cmd_stop = 0;
+		chip->comm_page->cmd_reset = 0;
+		return 0;
+	}
+
+	dev_dbg(chip->card->dev, "stop_transport: No pipes to stop!\n");
+	return 0;
+}
+
+
+
+static inline int is_pipe_allocated(struct echoaudio *chip, u16 pipe_index)
+{
+	return (chip->pipe_alloc_mask & (1 << pipe_index));
+}
+
+
+
+/* Stops everything and turns off the DSP. All pipes should be already
+stopped and unallocated. */
+static int rest_in_peace(struct echoaudio *chip)
+{
+
+	/* Stops all active pipes (just to be sure) */
+	stop_transport(chip, chip->active_mask);
+
+	set_meters_on(chip, false);
+
+#ifdef ECHOCARD_HAS_MIDI
+	enable_midi_input(chip, false);
+#endif
+
+	/* Go to sleep */
+	if (chip->dsp_code) {
+		/* Make load_firmware do a complete reload */
+		chip->dsp_code = NULL;
+		/* Put the DSP to sleep */
+		return send_vector(chip, DSP_VC_GO_COMATOSE);
+	}
+	return 0;
+}
+
+
+
+/* Fills the comm page with default values */
+static int init_dsp_comm_page(struct echoaudio *chip)
+{
+	/* Check if the compiler added extra padding inside the structure */
+	if (offsetof(struct comm_page, midi_output) != 0xbe0) {
+		dev_err(chip->card->dev,
+			"init_dsp_comm_page() - Invalid struct comm_page structure\n");
+		return -EPERM;
+	}
+
+	/* Init all the basic stuff */
+	chip->card_name = ECHOCARD_NAME;
+	chip->bad_board = true;	/* Set true until DSP loaded */
+	chip->dsp_code = NULL;	/* Current DSP code not loaded */
+	chip->asic_loaded = false;
+	memset(chip->comm_page, 0, sizeof(struct comm_page));
+
+	/* Init the comm page */
+	chip->comm_page->comm_size =
+		cpu_to_le32(sizeof(struct comm_page));
+	chip->comm_page->handshake = cpu_to_le32(0xffffffff);
+	chip->comm_page->midi_out_free_count =
+		cpu_to_le32(DSP_MIDI_OUT_FIFO_SIZE);
+	chip->comm_page->sample_rate = cpu_to_le32(44100);
+
+	/* Set line levels so we don't blast any inputs on startup */
+	memset(chip->comm_page->monitors, ECHOGAIN_MUTED, MONITOR_ARRAY_SIZE);
+	memset(chip->comm_page->vmixer, ECHOGAIN_MUTED, VMIXER_ARRAY_SIZE);
+
+	return 0;
+}
+
+
+
+/* This function initializes the chip structure with default values, ie. all
+ * muted and internal clock source. Then it copies the settings to the DSP.
+ * This MUST be called after the DSP is up and running !
+ */
+static int init_line_levels(struct echoaudio *chip)
+{
+	memset(chip->output_gain, ECHOGAIN_MUTED, sizeof(chip->output_gain));
+	memset(chip->input_gain, ECHOGAIN_MUTED, sizeof(chip->input_gain));
+	memset(chip->monitor_gain, ECHOGAIN_MUTED, sizeof(chip->monitor_gain));
+	memset(chip->vmixer_gain, ECHOGAIN_MUTED, sizeof(chip->vmixer_gain));
+	chip->input_clock = ECHO_CLOCK_INTERNAL;
+	chip->output_clock = ECHO_CLOCK_WORD;
+	chip->sample_rate = 44100;
+	return restore_dsp_rettings(chip);
+}
+
+
+
+/* This is low level part of the interrupt handler.
+It returns -1 if the IRQ is not ours, or N>=0 if it is, where N is the number
+of midi data in the input queue. */
+static int service_irq(struct echoaudio *chip)
+{
+	int st;
+
+	/* Read the DSP status register and see if this DSP generated this interrupt */
+	if (get_dsp_register(chip, CHI32_STATUS_REG) & CHI32_STATUS_IRQ) {
+		st = 0;
+#ifdef ECHOCARD_HAS_MIDI
+		/* Get and parse midi data if present */
+		if (chip->comm_page->midi_input[0])	/* The count is at index 0 */
+			st = midi_service_irq(chip);	/* Returns how many midi bytes we received */
+#endif
+		/* Clear the hardware interrupt */
+		chip->comm_page->midi_input[0] = 0;
+		send_vector(chip, DSP_VC_ACK_INT);
+		return st;
+	}
+	return -1;
+}
+
+
+
+
+/******************************************************************************
+	Functions for opening and closing pipes
+ ******************************************************************************/
+
+/* allocate_pipes is used to reserve audio pipes for your exclusive use.
+The call will fail if some pipes are already allocated. */
+static int allocate_pipes(struct echoaudio *chip, struct audiopipe *pipe,
+			  int pipe_index, int interleave)
+{
+	int i;
+	u32 channel_mask;
+
+	dev_dbg(chip->card->dev,
+		"allocate_pipes: ch=%d int=%d\n", pipe_index, interleave);
+
+	if (chip->bad_board)
+		return -EIO;
+
+	for (channel_mask = i = 0; i < interleave; i++)
+		channel_mask |= 1 << (pipe_index + i);
+	if (chip->pipe_alloc_mask & channel_mask) {
+		dev_err(chip->card->dev,
+			"allocate_pipes: channel already open\n");
+		return -EAGAIN;
+	}
+
+	chip->comm_page->position[pipe_index] = 0;
+	chip->pipe_alloc_mask |= channel_mask;
+	/* This driver uses cyclic buffers only */
+	chip->pipe_cyclic_mask |= channel_mask;
+	pipe->index = pipe_index;
+	pipe->interleave = interleave;
+	pipe->state = PIPE_STATE_STOPPED;
+
+	/* The counter register is where the DSP writes the 32 bit DMA
+	position for a pipe.  The DSP is constantly updating this value as
+	it moves data. The DMA counter is in units of bytes, not samples. */
+	pipe->dma_counter = (__le32 *)&chip->comm_page->position[pipe_index];
+	*pipe->dma_counter = 0;
+	return pipe_index;
+}
+
+
+
+static int free_pipes(struct echoaudio *chip, struct audiopipe *pipe)
+{
+	u32 channel_mask;
+	int i;
+
+	if (snd_BUG_ON(!is_pipe_allocated(chip, pipe->index)))
+		return -EINVAL;
+	if (snd_BUG_ON(pipe->state != PIPE_STATE_STOPPED))
+		return -EINVAL;
+
+	for (channel_mask = i = 0; i < pipe->interleave; i++)
+		channel_mask |= 1 << (pipe->index + i);
+
+	chip->pipe_alloc_mask &= ~channel_mask;
+	chip->pipe_cyclic_mask &= ~channel_mask;
+	return 0;
+}
+
+
+
+/******************************************************************************
+	Functions for managing the scatter-gather list
+******************************************************************************/
+
+static int sglist_init(struct echoaudio *chip, struct audiopipe *pipe)
+{
+	pipe->sglist_head = 0;
+	memset(pipe->sgpage.area, 0, PAGE_SIZE);
+	chip->comm_page->sglist_addr[pipe->index].addr =
+		cpu_to_le32(pipe->sgpage.addr);
+	return 0;
+}
+
+
+
+static int sglist_add_mapping(struct echoaudio *chip, struct audiopipe *pipe,
+				dma_addr_t address, size_t length)
+{
+	int head = pipe->sglist_head;
+	struct sg_entry *list = (struct sg_entry *)pipe->sgpage.area;
+
+	if (head < MAX_SGLIST_ENTRIES - 1) {
+		list[head].addr = cpu_to_le32(address);
+		list[head].size = cpu_to_le32(length);
+		pipe->sglist_head++;
+	} else {
+		dev_err(chip->card->dev, "SGlist: too many fragments\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+
+
+static inline int sglist_add_irq(struct echoaudio *chip, struct audiopipe *pipe)
+{
+	return sglist_add_mapping(chip, pipe, 0, 0);
+}
+
+
+
+static inline int sglist_wrap(struct echoaudio *chip, struct audiopipe *pipe)
+{
+	return sglist_add_mapping(chip, pipe, pipe->sgpage.addr, 0);
+}
diff --git a/sound/pci/echoaudio/echoaudio_dsp.h b/sound/pci/echoaudio/echoaudio_dsp.h
new file mode 100644
index 000000000..aa9129519
--- /dev/null
+++ b/sound/pci/echoaudio/echoaudio_dsp.h
@@ -0,0 +1,698 @@
+/****************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+   *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+#ifndef _ECHO_DSP_
+#define _ECHO_DSP_
+
+
+/**** Echogals: Darla20, Gina20, Layla20, and Darla24 ****/
+#if defined(ECHOGALS_FAMILY)
+
+#define NUM_ASIC_TESTS		5
+#define READ_DSP_TIMEOUT	1000000L	/* one second */
+
+/**** Echo24: Gina24, Layla24, Mona, Mia, Mia-midi ****/
+#elif defined(ECHO24_FAMILY)
+
+#define DSP_56361			/* Some Echo24 cards use the 56361 DSP */
+#define READ_DSP_TIMEOUT	100000L		/* .1 second */
+
+/**** 3G: Gina3G, Layla3G ****/
+#elif defined(ECHO3G_FAMILY)
+
+#define DSP_56361
+#define READ_DSP_TIMEOUT 	100000L		/* .1 second */
+#define MIN_MTC_1X_RATE		32000
+
+/**** Indigo: Indigo, Indigo IO, Indigo DJ ****/
+#elif defined(INDIGO_FAMILY)
+
+#define DSP_56361
+#define READ_DSP_TIMEOUT	100000L		/* .1 second */
+
+#else
+
+#error No family is defined
+
+#endif
+
+
+
+/*
+ *
+ *  Max inputs and outputs
+ *
+ */
+
+#define DSP_MAXAUDIOINPUTS		16	/* Max audio input channels */
+#define DSP_MAXAUDIOOUTPUTS		16	/* Max audio output channels */
+#define DSP_MAXPIPES			32	/* Max total pipes (input + output) */
+
+
+/*
+ *
+ * These are the offsets for the memory-mapped DSP registers; the DSP base
+ * address is treated as the start of a u32 array.
+ */
+
+#define CHI32_CONTROL_REG		4
+#define CHI32_STATUS_REG		5
+#define CHI32_VECTOR_REG		6
+#define CHI32_DATA_REG			7
+
+
+/*
+ *
+ * Interesting bits within the DSP registers
+ *
+ */
+
+#define CHI32_VECTOR_BUSY		0x00000001
+#define CHI32_STATUS_REG_HF3		0x00000008
+#define CHI32_STATUS_REG_HF4		0x00000010
+#define CHI32_STATUS_REG_HF5		0x00000020
+#define CHI32_STATUS_HOST_READ_FULL	0x00000004
+#define CHI32_STATUS_HOST_WRITE_EMPTY	0x00000002
+#define CHI32_STATUS_IRQ		0x00000040
+
+
+/* 
+ *
+ * DSP commands sent via slave mode; these are sent to the DSP by write_dsp()
+ *
+ */
+
+#define DSP_FNC_SET_COMMPAGE_ADDR		0x02
+#define DSP_FNC_LOAD_LAYLA_ASIC			0xa0
+#define DSP_FNC_LOAD_GINA24_ASIC		0xa0
+#define DSP_FNC_LOAD_MONA_PCI_CARD_ASIC		0xa0
+#define DSP_FNC_LOAD_LAYLA24_PCI_CARD_ASIC	0xa0
+#define DSP_FNC_LOAD_MONA_EXTERNAL_ASIC		0xa1
+#define DSP_FNC_LOAD_LAYLA24_EXTERNAL_ASIC	0xa1
+#define DSP_FNC_LOAD_3G_ASIC			0xa0
+
+
+/*
+ *
+ * Defines to handle the MIDI input state engine; these are used to properly
+ * extract MIDI time code bytes and their timestamps from the MIDI input stream.
+ *
+ */
+
+#define MIDI_IN_STATE_NORMAL	0
+#define MIDI_IN_STATE_TS_HIGH	1
+#define MIDI_IN_STATE_TS_LOW	2
+#define MIDI_IN_STATE_F1_DATA 	3
+#define MIDI_IN_SKIP_DATA	(-1)
+
+
+/*----------------------------------------------------------------------------
+
+Setting the sample rates on Layla24 is somewhat schizophrenic.
+
+For standard rates, it works exactly like Mona and Gina24.  That is, for
+8, 11.025, 16, 22.05, 32, 44.1, 48, 88.2, and 96 kHz, you just set the
+appropriate bits in the control register and write the control register.
+
+In order to support MIDI time code sync (and possibly SMPTE LTC sync in
+the future), Layla24 also has "continuous sample rate mode".  In this mode,
+Layla24 can generate any sample rate between 25 and 50 kHz inclusive, or
+50 to 100 kHz inclusive for double speed mode.
+
+To use continuous mode:
+
+-Set the clock select bits in the control register to 0xe (see the #define
+ below)
+
+-Set double-speed mode if you want to use sample rates above 50 kHz
+
+-Write the control register as you would normally
+
+-Now, you need to set the frequency register. First, you need to determine the
+ value for the frequency register.  This is given by the following formula:
+
+frequency_reg = (LAYLA24_MAGIC_NUMBER / sample_rate) - 2
+
+Note the #define below for the magic number
+
+-Wait for the DSP handshake
+-Write the frequency_reg value to the .SampleRate field of the comm page
+-Send the vector command SET_LAYLA24_FREQUENCY_REG (see vmonkey.h)
+
+Once you have set the control register up for continuous mode, you can just
+write the frequency register to change the sample rate.  This could be
+used for MIDI time code sync. For MTC sync, the control register is set for
+continuous mode.  The driver then just keeps writing the
+SET_LAYLA24_FREQUENCY_REG command.
+
+-----------------------------------------------------------------------------*/
+
+#define LAYLA24_MAGIC_NUMBER			677376000
+#define LAYLA24_CONTINUOUS_CLOCK		0x000e
+
+
+/*
+ *
+ * DSP vector commands
+ *
+ */
+
+#define DSP_VC_RESET				0x80ff
+
+#ifndef DSP_56361
+
+#define DSP_VC_ACK_INT				0x8073
+#define DSP_VC_SET_VMIXER_GAIN			0x0000	/* Not used, only for compile */
+#define DSP_VC_START_TRANSFER			0x0075	/* Handshke rqd. */
+#define DSP_VC_METERS_ON			0x0079
+#define DSP_VC_METERS_OFF			0x007b
+#define DSP_VC_UPDATE_OUTVOL			0x007d	/* Handshke rqd. */
+#define DSP_VC_UPDATE_INGAIN			0x007f	/* Handshke rqd. */
+#define DSP_VC_ADD_AUDIO_BUFFER			0x0081	/* Handshke rqd. */
+#define DSP_VC_TEST_ASIC			0x00eb
+#define DSP_VC_UPDATE_CLOCKS			0x00ef	/* Handshke rqd. */
+#define DSP_VC_SET_LAYLA_SAMPLE_RATE		0x00f1	/* Handshke rqd. */
+#define DSP_VC_SET_GD_AUDIO_STATE		0x00f1	/* Handshke rqd. */
+#define DSP_VC_WRITE_CONTROL_REG		0x00f1	/* Handshke rqd. */
+#define DSP_VC_MIDI_WRITE			0x00f5	/* Handshke rqd. */
+#define DSP_VC_STOP_TRANSFER			0x00f7	/* Handshke rqd. */
+#define DSP_VC_UPDATE_FLAGS			0x00fd	/* Handshke rqd. */
+#define DSP_VC_GO_COMATOSE			0x00f9
+
+#else /* !DSP_56361 */
+
+/* Vector commands for families that use either the 56301 or 56361 */
+#define DSP_VC_ACK_INT				0x80F5
+#define DSP_VC_SET_VMIXER_GAIN			0x00DB	/* Handshke rqd. */
+#define DSP_VC_START_TRANSFER			0x00DD	/* Handshke rqd. */
+#define DSP_VC_METERS_ON			0x00EF
+#define DSP_VC_METERS_OFF			0x00F1
+#define DSP_VC_UPDATE_OUTVOL			0x00E3	/* Handshke rqd. */
+#define DSP_VC_UPDATE_INGAIN			0x00E5	/* Handshke rqd. */
+#define DSP_VC_ADD_AUDIO_BUFFER			0x00E1	/* Handshke rqd. */
+#define DSP_VC_TEST_ASIC			0x00ED
+#define DSP_VC_UPDATE_CLOCKS			0x00E9	/* Handshke rqd. */
+#define DSP_VC_SET_LAYLA24_FREQUENCY_REG	0x00E9	/* Handshke rqd. */
+#define DSP_VC_SET_LAYLA_SAMPLE_RATE		0x00EB	/* Handshke rqd. */
+#define DSP_VC_SET_GD_AUDIO_STATE		0x00EB	/* Handshke rqd. */
+#define DSP_VC_WRITE_CONTROL_REG		0x00EB	/* Handshke rqd. */
+#define DSP_VC_MIDI_WRITE			0x00E7	/* Handshke rqd. */
+#define DSP_VC_STOP_TRANSFER			0x00DF	/* Handshke rqd. */
+#define DSP_VC_UPDATE_FLAGS			0x00FB	/* Handshke rqd. */
+#define DSP_VC_GO_COMATOSE			0x00d9
+
+#endif /* !DSP_56361 */
+
+
+/*
+ *
+ * Timeouts
+ *
+ */
+
+#define HANDSHAKE_TIMEOUT		20000	/* send_vector command timeout (20ms) */
+#define VECTOR_BUSY_TIMEOUT		100000	/* 100ms */
+#define MIDI_OUT_DELAY_USEC		2000	/* How long to wait after MIDI fills up */
+
+
+/*
+ *
+ * Flags for .Flags field in the comm page
+ *
+ */
+
+#define DSP_FLAG_MIDI_INPUT		0x0001	/* Enable MIDI input */
+#define DSP_FLAG_SPDIF_NONAUDIO		0x0002	/* Sets the "non-audio" bit
+						 * in the S/PDIF out status
+						 * bits.  Clear this flag for
+						 * audio data;
+						 * set it for AC3 or WMA or
+						 * some such */
+#define DSP_FLAG_PROFESSIONAL_SPDIF	0x0008	/* 1 Professional, 0 Consumer */
+
+
+/*
+ *
+ * Clock detect bits reported by the DSP for Gina20, Layla20, Darla24, and Mia
+ *
+ */
+
+#define GLDM_CLOCK_DETECT_BIT_WORD	0x0002
+#define GLDM_CLOCK_DETECT_BIT_SUPER	0x0004
+#define GLDM_CLOCK_DETECT_BIT_SPDIF	0x0008
+#define GLDM_CLOCK_DETECT_BIT_ESYNC	0x0010
+
+
+/*
+ *
+ * Clock detect bits reported by the DSP for Gina24, Mona, and Layla24
+ *
+ */
+
+#define GML_CLOCK_DETECT_BIT_WORD96	0x0002
+#define GML_CLOCK_DETECT_BIT_WORD48	0x0004
+#define GML_CLOCK_DETECT_BIT_SPDIF48	0x0008
+#define GML_CLOCK_DETECT_BIT_SPDIF96	0x0010
+#define GML_CLOCK_DETECT_BIT_WORD	(GML_CLOCK_DETECT_BIT_WORD96 | GML_CLOCK_DETECT_BIT_WORD48)
+#define GML_CLOCK_DETECT_BIT_SPDIF	(GML_CLOCK_DETECT_BIT_SPDIF48 | GML_CLOCK_DETECT_BIT_SPDIF96)
+#define GML_CLOCK_DETECT_BIT_ESYNC	0x0020
+#define GML_CLOCK_DETECT_BIT_ADAT	0x0040
+
+
+/*
+ *
+ * Layla clock numbers to send to DSP
+ *
+ */
+
+#define LAYLA20_CLOCK_INTERNAL		0
+#define LAYLA20_CLOCK_SPDIF		1
+#define LAYLA20_CLOCK_WORD		2
+#define LAYLA20_CLOCK_SUPER		3
+
+
+/*
+ *
+ * Gina/Darla clock states
+ *
+ */
+
+#define GD_CLOCK_NOCHANGE		0
+#define GD_CLOCK_44			1
+#define GD_CLOCK_48			2
+#define GD_CLOCK_SPDIFIN		3
+#define GD_CLOCK_UNDEF			0xff
+
+
+/*
+ *
+ * Gina/Darla S/PDIF status bits
+ *
+ */
+
+#define GD_SPDIF_STATUS_NOCHANGE	0
+#define GD_SPDIF_STATUS_44		1
+#define GD_SPDIF_STATUS_48		2
+#define GD_SPDIF_STATUS_UNDEF		0xff
+
+
+/*
+ *
+ * Layla20 output clocks
+ *
+ */
+
+#define LAYLA20_OUTPUT_CLOCK_SUPER	0
+#define LAYLA20_OUTPUT_CLOCK_WORD	1
+
+
+/****************************************************************************
+
+   Magic constants for the Darla24 hardware
+
+ ****************************************************************************/
+
+#define GD24_96000	0x0
+#define GD24_48000	0x1
+#define GD24_44100	0x2
+#define GD24_32000	0x3
+#define GD24_22050	0x4
+#define GD24_16000	0x5
+#define GD24_11025	0x6
+#define GD24_8000	0x7
+#define GD24_88200	0x8
+#define GD24_EXT_SYNC	0x9
+
+
+/*
+ *
+ * Return values from the DSP when ASIC is loaded
+ *
+ */
+
+#define ASIC_ALREADY_LOADED	0x1
+#define ASIC_NOT_LOADED		0x0
+
+
+/*
+ *
+ * DSP Audio formats
+ *
+ * These are the audio formats that the DSP can transfer
+ * via input and output pipes.  LE means little-endian,
+ * BE means big-endian.
+ *
+ * DSP_AUDIOFORM_MS_8   
+ *
+ *    8-bit mono unsigned samples.  For playback,
+ *    mono data is duplicated out the left and right channels
+ *    of the output bus.  The "MS" part of the name
+ *    means mono->stereo.
+ *
+ * DSP_AUDIOFORM_MS_16LE
+ *
+ *    16-bit signed little-endian mono samples.  Playback works
+ *    like the previous code.
+ *
+ * DSP_AUDIOFORM_MS_24LE
+ *
+ *    24-bit signed little-endian mono samples.  Data is packed
+ *    three bytes per sample; if you had two samples 0x112233 and 0x445566
+ *    they would be stored in memory like this: 33 22 11 66 55 44.
+ *
+ * DSP_AUDIOFORM_MS_32LE
+ * 
+ *    24-bit signed little-endian mono samples in a 32-bit 
+ *    container.  In other words, each sample is a 32-bit signed 
+ *    integer, where the actual audio data is left-justified 
+ *    in the 32 bits and only the 24 most significant bits are valid.
+ *
+ * DSP_AUDIOFORM_SS_8
+ * DSP_AUDIOFORM_SS_16LE
+ * DSP_AUDIOFORM_SS_24LE
+ * DSP_AUDIOFORM_SS_32LE
+ *
+ *    Like the previous ones, except now with stereo interleaved
+ *    data.  "SS" means stereo->stereo.
+ *
+ * DSP_AUDIOFORM_MM_32LE
+ *
+ *    Similar to DSP_AUDIOFORM_MS_32LE, except that the mono
+ *    data is not duplicated out both the left and right outputs.
+ *    This mode is used by the ASIO driver.  Here, "MM" means
+ *    mono->mono.
+ *
+ * DSP_AUDIOFORM_MM_32BE
+ *
+ *    Just like DSP_AUDIOFORM_MM_32LE, but now the data is
+ *    in big-endian format.
+ *
+ */
+
+#define DSP_AUDIOFORM_MS_8	0	/* 8 bit mono */
+#define DSP_AUDIOFORM_MS_16LE	1	/* 16 bit mono */
+#define DSP_AUDIOFORM_MS_24LE	2	/* 24 bit mono */
+#define DSP_AUDIOFORM_MS_32LE	3	/* 32 bit mono */
+#define DSP_AUDIOFORM_SS_8	4	/* 8 bit stereo */
+#define DSP_AUDIOFORM_SS_16LE	5	/* 16 bit stereo */
+#define DSP_AUDIOFORM_SS_24LE	6	/* 24 bit stereo */
+#define DSP_AUDIOFORM_SS_32LE	7	/* 32 bit stereo */
+#define DSP_AUDIOFORM_MM_32LE	8	/* 32 bit mono->mono little-endian */
+#define DSP_AUDIOFORM_MM_32BE	9	/* 32 bit mono->mono big-endian */
+#define DSP_AUDIOFORM_SS_32BE	10	/* 32 bit stereo big endian */
+#define DSP_AUDIOFORM_INVALID	0xFF	/* Invalid audio format */
+
+
+/*
+ *
+ * Super-interleave is defined as interleaving by 4 or more.  Darla20 and Gina20
+ * do not support super interleave.
+ *
+ * 16 bit, 24 bit, and 32 bit little endian samples are supported for super 
+ * interleave.  The interleave factor must be even.  16 - way interleave is the 
+ * current maximum, so you can interleave by 4, 6, 8, 10, 12, 14, and 16.
+ *
+ * The actual format code is derived by taking the define below and or-ing with
+ * the interleave factor.  So, 32 bit interleave by 6 is 0x86 and
+ * 16 bit interleave by 16 is (0x40 | 0x10) = 0x50.
+ *
+ */
+
+#define DSP_AUDIOFORM_SUPER_INTERLEAVE_16LE	0x40
+#define DSP_AUDIOFORM_SUPER_INTERLEAVE_24LE	0xc0
+#define DSP_AUDIOFORM_SUPER_INTERLEAVE_32LE	0x80
+
+
+/*
+ *
+ * Gina24, Mona, and Layla24 control register defines
+ *
+ */
+
+#define GML_CONVERTER_ENABLE	0x0010
+#define GML_SPDIF_PRO_MODE	0x0020	/* Professional S/PDIF == 1,
+					   consumer == 0 */
+#define GML_SPDIF_SAMPLE_RATE0	0x0040
+#define GML_SPDIF_SAMPLE_RATE1	0x0080
+#define GML_SPDIF_TWO_CHANNEL	0x0100	/* 1 == two channels,
+					   0 == one channel */
+#define GML_SPDIF_NOT_AUDIO	0x0200
+#define GML_SPDIF_COPY_PERMIT	0x0400
+#define GML_SPDIF_24_BIT	0x0800	/* 1 == 24 bit, 0 == 20 bit */
+#define GML_ADAT_MODE		0x1000	/* 1 == ADAT mode, 0 == S/PDIF mode */
+#define GML_SPDIF_OPTICAL_MODE	0x2000	/* 1 == optical mode, 0 == RCA mode */
+#define GML_SPDIF_CDROM_MODE	0x3000	/* 1 == CDROM mode,
+					 * 0 == RCA or optical mode */
+#define GML_DOUBLE_SPEED_MODE	0x4000	/* 1 == double speed,
+					   0 == single speed */
+
+#define GML_DIGITAL_IN_AUTO_MUTE 0x800000
+
+#define GML_96KHZ		(0x0 | GML_DOUBLE_SPEED_MODE)
+#define GML_88KHZ		(0x1 | GML_DOUBLE_SPEED_MODE)
+#define GML_48KHZ		0x2
+#define GML_44KHZ		0x3
+#define GML_32KHZ		0x4
+#define GML_22KHZ		0x5
+#define GML_16KHZ		0x6
+#define GML_11KHZ		0x7
+#define GML_8KHZ		0x8
+#define GML_SPDIF_CLOCK		0x9
+#define GML_ADAT_CLOCK		0xA
+#define GML_WORD_CLOCK		0xB
+#define GML_ESYNC_CLOCK		0xC
+#define GML_ESYNCx2_CLOCK	0xD
+
+#define GML_CLOCK_CLEAR_MASK		0xffffbff0
+#define GML_SPDIF_RATE_CLEAR_MASK	(~(GML_SPDIF_SAMPLE_RATE0|GML_SPDIF_SAMPLE_RATE1))
+#define GML_DIGITAL_MODE_CLEAR_MASK	0xffffcfff
+#define GML_SPDIF_FORMAT_CLEAR_MASK	0xfffff01f
+
+
+/*
+ *
+ * Mia sample rate and clock setting constants
+ *
+ */
+
+#define MIA_32000	0x0040
+#define MIA_44100	0x0042
+#define MIA_48000	0x0041
+#define MIA_88200	0x0142
+#define MIA_96000	0x0141
+
+#define MIA_SPDIF	0x00000044
+#define MIA_SPDIF96	0x00000144
+
+#define MIA_MIDI_REV	1	/* Must be Mia rev 1 for MIDI support */
+
+
+/*
+ *
+ * 3G register bits
+ *
+ */
+
+#define E3G_CONVERTER_ENABLE	0x0010
+#define E3G_SPDIF_PRO_MODE	0x0020	/* Professional S/PDIF == 1,
+					   consumer == 0 */
+#define E3G_SPDIF_SAMPLE_RATE0	0x0040
+#define E3G_SPDIF_SAMPLE_RATE1	0x0080
+#define E3G_SPDIF_TWO_CHANNEL	0x0100	/* 1 == two channels,
+					   0 == one channel */
+#define E3G_SPDIF_NOT_AUDIO	0x0200
+#define E3G_SPDIF_COPY_PERMIT	0x0400
+#define E3G_SPDIF_24_BIT	0x0800	/* 1 == 24 bit, 0 == 20 bit */
+#define E3G_DOUBLE_SPEED_MODE	0x4000	/* 1 == double speed,
+					   0 == single speed */
+#define E3G_PHANTOM_POWER	0x8000	/* 1 == phantom power on,
+					   0 == phantom power off */
+
+#define E3G_96KHZ		(0x0 | E3G_DOUBLE_SPEED_MODE)
+#define E3G_88KHZ		(0x1 | E3G_DOUBLE_SPEED_MODE)
+#define E3G_48KHZ		0x2
+#define E3G_44KHZ		0x3
+#define E3G_32KHZ		0x4
+#define E3G_22KHZ		0x5
+#define E3G_16KHZ		0x6
+#define E3G_11KHZ		0x7
+#define E3G_8KHZ		0x8
+#define E3G_SPDIF_CLOCK		0x9
+#define E3G_ADAT_CLOCK		0xA
+#define E3G_WORD_CLOCK		0xB
+#define E3G_CONTINUOUS_CLOCK	0xE
+
+#define E3G_ADAT_MODE		0x1000
+#define E3G_SPDIF_OPTICAL_MODE	0x2000
+
+#define E3G_CLOCK_CLEAR_MASK		0xbfffbff0
+#define E3G_DIGITAL_MODE_CLEAR_MASK	0xffffcfff
+#define E3G_SPDIF_FORMAT_CLEAR_MASK	0xfffff01f
+
+/* Clock detect bits reported by the DSP */
+#define E3G_CLOCK_DETECT_BIT_WORD96	0x0001
+#define E3G_CLOCK_DETECT_BIT_WORD48	0x0002
+#define E3G_CLOCK_DETECT_BIT_SPDIF48	0x0004
+#define E3G_CLOCK_DETECT_BIT_ADAT	0x0004
+#define E3G_CLOCK_DETECT_BIT_SPDIF96	0x0008
+#define E3G_CLOCK_DETECT_BIT_WORD	(E3G_CLOCK_DETECT_BIT_WORD96|E3G_CLOCK_DETECT_BIT_WORD48)
+#define E3G_CLOCK_DETECT_BIT_SPDIF	(E3G_CLOCK_DETECT_BIT_SPDIF48|E3G_CLOCK_DETECT_BIT_SPDIF96)
+
+/* Frequency control register */
+#define E3G_MAGIC_NUMBER		677376000
+#define E3G_FREQ_REG_DEFAULT		(E3G_MAGIC_NUMBER / 48000 - 2)
+#define E3G_FREQ_REG_MAX		0xffff
+
+/* 3G external box types */
+#define E3G_GINA3G_BOX_TYPE		0x00
+#define E3G_LAYLA3G_BOX_TYPE		0x10
+#define E3G_ASIC_NOT_LOADED		0xffff
+#define E3G_BOX_TYPE_MASK		0xf0
+
+/* Indigo express control register values */
+#define INDIGO_EXPRESS_32000		0x02
+#define INDIGO_EXPRESS_44100		0x01
+#define INDIGO_EXPRESS_48000		0x00
+#define INDIGO_EXPRESS_DOUBLE_SPEED	0x10
+#define INDIGO_EXPRESS_QUAD_SPEED	0x04
+#define INDIGO_EXPRESS_CLOCK_MASK	0x17
+
+
+/*
+ *
+ * Gina20 & Layla20 have input gain controls for the analog inputs;
+ * this is the magic number for the hardware that gives you 0 dB at -10.
+ *
+ */
+
+#define GL20_INPUT_GAIN_MAGIC_NUMBER	0xC8
+
+
+/*
+ *
+ * Defines how much time must pass between DSP load attempts
+ *
+ */
+
+#define DSP_LOAD_ATTEMPT_PERIOD		1000000L	/* One second */
+
+
+/*
+ *
+ * Size of arrays for the comm page.  MAX_PLAY_TAPS and MAX_REC_TAPS are
+ * no longer used, but the sizes must still be right for the DSP to see
+ * the comm page correctly.
+ *
+ */
+
+#define MONITOR_ARRAY_SIZE	0x180
+#define VMIXER_ARRAY_SIZE	0x40
+#define MIDI_OUT_BUFFER_SIZE	32
+#define MIDI_IN_BUFFER_SIZE	256
+#define MAX_PLAY_TAPS		168
+#define MAX_REC_TAPS		192
+#define DSP_MIDI_OUT_FIFO_SIZE	64
+
+
+/* sg_entry is a single entry for the scatter-gather list.  The array of struct
+sg_entry struct is read by the DSP, so all values must be little-endian. */
+
+#define MAX_SGLIST_ENTRIES 512
+
+struct sg_entry {
+	__le32 addr;
+	__le32 size;
+};
+
+
+/****************************************************************************
+
+  The comm page.  This structure is read and written by the DSP; the
+  DSP code is a firm believer in the byte offsets written in the comments
+  at the end of each line.  This structure should not be changed.
+
+  Any reads from or writes to this structure should be in little-endian format.
+
+ ****************************************************************************/
+
+struct comm_page {		/*				Base	Length*/
+	__le32 comm_size;	/* size of this object		0x000	4 */
+	__le32 flags;		/* See Appendix A below		0x004	4 */
+	__le32 unused;		/* Unused entry			0x008	4 */
+	__le32 sample_rate;	/* Card sample rate in Hz	0x00c	4 */
+	__le32 handshake;	/* DSP command handshake	0x010	4 */
+	__le32 cmd_start;	/* Chs. to start mask		0x014	4 */
+	__le32 cmd_stop;	/* Chs. to stop mask		0x018	4 */
+	__le32 cmd_reset;	/* Chs. to reset mask		0x01c	4 */
+	__le16 audio_format[DSP_MAXPIPES];	/* Chs. audio format	0x020	32*2 */
+	struct sg_entry sglist_addr[DSP_MAXPIPES];
+				/* Chs. Physical sglist addrs	0x060	32*8 */
+	__le32 position[DSP_MAXPIPES];
+				/* Positions for ea. ch.	0x160	32*4 */
+	s8 vu_meter[DSP_MAXPIPES];
+				/* VU meters			0x1e0	32*1 */
+	s8 peak_meter[DSP_MAXPIPES];
+				/* Peak meters			0x200	32*1 */
+	s8 line_out_level[DSP_MAXAUDIOOUTPUTS];
+				/* Output gain			0x220	16*1 */
+	s8 line_in_level[DSP_MAXAUDIOINPUTS];
+				/* Input gain			0x230	16*1 */
+	s8 monitors[MONITOR_ARRAY_SIZE];
+				/* Monitor map			0x240	0x180 */
+	__le32 play_coeff[MAX_PLAY_TAPS];
+			/* Gina/Darla play filters - obsolete	0x3c0	168*4 */
+	__le32 rec_coeff[MAX_REC_TAPS];
+			/* Gina/Darla record filters - obsolete	0x660	192*4 */
+	__le16 midi_input[MIDI_IN_BUFFER_SIZE];
+			/* MIDI input data transfer buffer	0x960	256*2 */
+	u8 gd_clock_state;	/* Chg Gina/Darla clock state	0xb60	1 */
+	u8 gd_spdif_status;	/* Chg. Gina/Darla S/PDIF state	0xb61	1 */
+	u8 gd_resampler_state;	/* Should always be 3		0xb62	1 */
+	u8 filler2;		/*				0xb63	1 */
+	__le32 nominal_level_mask;	/* -10 level enable mask	0xb64	4 */
+	__le16 input_clock;	/* Chg. Input clock state	0xb68	2 */
+	__le16 output_clock;	/* Chg. Output clock state	0xb6a	2 */
+	__le32 status_clocks;	/* Current Input clock state	0xb6c	4 */
+	__le32 ext_box_status;	/* External box status		0xb70	4 */
+	__le32 cmd_add_buffer;	/* Pipes to add (obsolete)	0xb74	4 */
+	__le32 midi_out_free_count;
+			/* # of bytes free in MIDI output FIFO	0xb78	4 */
+	__le32 unused2;		/* Cyclic pipes			0xb7c	4 */
+	__le32 control_register;
+			/* Mona, Gina24, Layla24, 3G ctrl reg	0xb80	4 */
+	__le32 e3g_frq_register;	/* 3G frequency register	0xb84	4 */
+	u8 filler[24];		/* filler			0xb88	24*1 */
+	s8 vmixer[VMIXER_ARRAY_SIZE];
+				/* Vmixer levels		0xba0	64*1 */
+	u8 midi_output[MIDI_OUT_BUFFER_SIZE];
+				/* MIDI output data		0xbe0	32*1 */
+};
+
+#endif /* _ECHO_DSP_ */
diff --git a/sound/pci/echoaudio/echoaudio_gml.c b/sound/pci/echoaudio/echoaudio_gml.c
new file mode 100644
index 000000000..eea6fe530
--- /dev/null
+++ b/sound/pci/echoaudio/echoaudio_gml.c
@@ -0,0 +1,203 @@
+/****************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+   *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+/* These functions are common for Gina24, Layla24 and Mona cards */
+
+
+/* ASIC status check - some cards have one or two ASICs that need to be
+loaded.  Once that load is complete, this function is called to see if
+the load was successful.
+If this load fails, it does not necessarily mean that the hardware is
+defective - the external box may be disconnected or turned off. */
+static int check_asic_status(struct echoaudio *chip)
+{
+	u32 asic_status;
+
+	send_vector(chip, DSP_VC_TEST_ASIC);
+
+	/* The DSP will return a value to indicate whether or not the
+	   ASIC is currently loaded */
+	if (read_dsp(chip, &asic_status) < 0) {
+		dev_err(chip->card->dev,
+			"check_asic_status: failed on read_dsp\n");
+		chip->asic_loaded = false;
+		return -EIO;
+	}
+
+	chip->asic_loaded = (asic_status == ASIC_ALREADY_LOADED);
+	return chip->asic_loaded ? 0 : -EIO;
+}
+
+
+
+/* Most configuration of Gina24, Layla24, or Mona is accomplished by writing
+the control register.  write_control_reg sends the new control register
+value to the DSP. */
+static int write_control_reg(struct echoaudio *chip, u32 value, char force)
+{
+	__le32 reg_value;
+
+	/* Handle the digital input auto-mute */
+	if (chip->digital_in_automute)
+		value |= GML_DIGITAL_IN_AUTO_MUTE;
+	else
+		value &= ~GML_DIGITAL_IN_AUTO_MUTE;
+
+	dev_dbg(chip->card->dev, "write_control_reg: 0x%x\n", value);
+
+	/* Write the control register */
+	reg_value = cpu_to_le32(value);
+	if (reg_value != chip->comm_page->control_register || force) {
+		if (wait_handshake(chip))
+			return -EIO;
+		chip->comm_page->control_register = reg_value;
+		clear_handshake(chip);
+		return send_vector(chip, DSP_VC_WRITE_CONTROL_REG);
+	}
+	return 0;
+}
+
+
+
+/* Gina24, Layla24, and Mona support digital input auto-mute.  If the digital
+input auto-mute is enabled, the DSP will only enable the digital inputs if
+the card is syncing to a valid clock on the ADAT or S/PDIF inputs.
+If the auto-mute is disabled, the digital inputs are enabled regardless of
+what the input clock is set or what is connected. */
+static int set_input_auto_mute(struct echoaudio *chip, int automute)
+{
+	dev_dbg(chip->card->dev, "set_input_auto_mute %d\n", automute);
+
+	chip->digital_in_automute = automute;
+
+	/* Re-set the input clock to the current value - indirectly causes
+	the auto-mute flag to be sent to the DSP */
+	return set_input_clock(chip, chip->input_clock);
+}
+
+
+
+/* S/PDIF coax / S/PDIF optical / ADAT - switch */
+static int set_digital_mode(struct echoaudio *chip, u8 mode)
+{
+	u8 previous_mode;
+	int err, i, o;
+
+	if (chip->bad_board)
+		return -EIO;
+
+	/* All audio channels must be closed before changing the digital mode */
+	if (snd_BUG_ON(chip->pipe_alloc_mask))
+		return -EAGAIN;
+
+	if (snd_BUG_ON(!(chip->digital_modes & (1 << mode))))
+		return -EINVAL;
+
+	previous_mode = chip->digital_mode;
+	err = dsp_set_digital_mode(chip, mode);
+
+	/* If we successfully changed the digital mode from or to ADAT,
+	   then make sure all output, input and monitor levels are
+	   updated by the DSP comm object. */
+	if (err >= 0 && previous_mode != mode &&
+	    (previous_mode == DIGITAL_MODE_ADAT || mode == DIGITAL_MODE_ADAT)) {
+		spin_lock_irq(&chip->lock);
+		for (o = 0; o < num_busses_out(chip); o++)
+			for (i = 0; i < num_busses_in(chip); i++)
+				set_monitor_gain(chip, o, i,
+						 chip->monitor_gain[o][i]);
+
+#ifdef ECHOCARD_HAS_INPUT_GAIN
+		for (i = 0; i < num_busses_in(chip); i++)
+			set_input_gain(chip, i, chip->input_gain[i]);
+		update_input_line_level(chip);
+#endif
+
+		for (o = 0; o < num_busses_out(chip); o++)
+			set_output_gain(chip, o, chip->output_gain[o]);
+		update_output_line_level(chip);
+		spin_unlock_irq(&chip->lock);
+	}
+
+	return err;
+}
+
+
+
+/* Set the S/PDIF output format */
+static int set_professional_spdif(struct echoaudio *chip, char prof)
+{
+	u32 control_reg;
+	int err;
+
+	/* Clear the current S/PDIF flags */
+	control_reg = le32_to_cpu(chip->comm_page->control_register);
+	control_reg &= GML_SPDIF_FORMAT_CLEAR_MASK;
+
+	/* Set the new S/PDIF flags depending on the mode */
+	control_reg |= GML_SPDIF_TWO_CHANNEL | GML_SPDIF_24_BIT |
+		GML_SPDIF_COPY_PERMIT;
+	if (prof) {
+		/* Professional mode */
+		control_reg |= GML_SPDIF_PRO_MODE;
+
+		switch (chip->sample_rate) {
+		case 32000:
+			control_reg |= GML_SPDIF_SAMPLE_RATE0 |
+				GML_SPDIF_SAMPLE_RATE1;
+			break;
+		case 44100:
+			control_reg |= GML_SPDIF_SAMPLE_RATE0;
+			break;
+		case 48000:
+			control_reg |= GML_SPDIF_SAMPLE_RATE1;
+			break;
+		}
+	} else {
+		/* Consumer mode */
+		switch (chip->sample_rate) {
+		case 32000:
+			control_reg |= GML_SPDIF_SAMPLE_RATE0 |
+				GML_SPDIF_SAMPLE_RATE1;
+			break;
+		case 48000:
+			control_reg |= GML_SPDIF_SAMPLE_RATE1;
+			break;
+		}
+	}
+
+	if ((err = write_control_reg(chip, control_reg, false)))
+		return err;
+	chip->professional_spdif = prof;
+	dev_dbg(chip->card->dev, "set_professional_spdif to %s\n",
+		prof ? "Professional" : "Consumer");
+	return 0;
+}
diff --git a/sound/pci/echoaudio/gina20.c b/sound/pci/echoaudio/gina20.c
new file mode 100644
index 000000000..4f864ddc9
--- /dev/null
+++ b/sound/pci/echoaudio/gina20.c
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  ALSA driver for Echoaudio soundcards.
+ *  Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ */
+
+#define ECHOGALS_FAMILY
+#define ECHOCARD_GINA20
+#define ECHOCARD_NAME "Gina20"
+#define ECHOCARD_HAS_MONITOR
+#define ECHOCARD_HAS_INPUT_GAIN
+#define ECHOCARD_HAS_DIGITAL_IO
+#define ECHOCARD_HAS_EXTERNAL_CLOCK
+#define ECHOCARD_HAS_ADAT	false
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT	0	/* 8 */
+#define PX_DIGITAL_OUT	8	/* 2 */
+#define PX_ANALOG_IN	10	/* 2 */
+#define PX_DIGITAL_IN	12	/* 2 */
+#define PX_NUM		14
+
+/* Bus indexes */
+#define BX_ANALOG_OUT	0	/* 8 */
+#define BX_DIGITAL_OUT	8	/* 2 */
+#define BX_ANALOG_IN	10	/* 2 */
+#define BX_DIGITAL_IN	12	/* 2 */
+#define BX_NUM		14
+
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/tlv.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <linux/atomic.h>
+#include "echoaudio.h"
+
+MODULE_FIRMWARE("ea/gina20_dsp.fw");
+
+#define FW_GINA20_DSP	0
+
+static const struct firmware card_fw[] = {
+	{0, "gina20_dsp.fw"}
+};
+
+static const struct pci_device_id snd_echo_ids[] = {
+	{0x1057, 0x1801, 0xECC0, 0x0020, 0, 0, 0},	/* DSP 56301 Gina20 rev.0 */
+	{0,}
+};
+
+static const struct snd_pcm_hardware pcm_hardware_skel = {
+	.info = SNDRV_PCM_INFO_MMAP |
+		SNDRV_PCM_INFO_INTERLEAVED |
+		SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_PAUSE |
+		SNDRV_PCM_INFO_SYNC_START,
+	.formats =	SNDRV_PCM_FMTBIT_U8 |
+			SNDRV_PCM_FMTBIT_S16_LE |
+			SNDRV_PCM_FMTBIT_S24_3LE |
+			SNDRV_PCM_FMTBIT_S32_LE |
+			SNDRV_PCM_FMTBIT_S32_BE,
+	.rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000,
+	.rate_min = 44100,
+	.rate_max = 48000,
+	.channels_min = 1,
+	.channels_max = 2,
+	.buffer_bytes_max = 262144,
+	.period_bytes_min = 32,
+	.period_bytes_max = 131072,
+	.periods_min = 2,
+	.periods_max = 220,
+	/* One page (4k) contains 512 instructions. I don't know if the hw
+	supports lists longer than this. In this case periods_max=220 is a
+	safe limit to make sure the list never exceeds 512 instructions. */
+};
+
+
+#include "gina20_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio.c"
diff --git a/sound/pci/echoaudio/gina20_dsp.c b/sound/pci/echoaudio/gina20_dsp.c
new file mode 100644
index 000000000..b2377573d
--- /dev/null
+++ b/sound/pci/echoaudio/gina20_dsp.c
@@ -0,0 +1,215 @@
+/****************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+   *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int set_professional_spdif(struct echoaudio *chip, char prof);
+static int update_flags(struct echoaudio *chip);
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+	int err;
+
+	if (snd_BUG_ON((subdevice_id & 0xfff0) != GINA20))
+		return -ENODEV;
+
+	if ((err = init_dsp_comm_page(chip))) {
+		dev_err(chip->card->dev,
+			"init_hw - could not initialize DSP comm page\n");
+		return err;
+	}
+
+	chip->device_id = device_id;
+	chip->subdevice_id = subdevice_id;
+	chip->bad_board = true;
+	chip->dsp_code_to_load = FW_GINA20_DSP;
+	chip->spdif_status = GD_SPDIF_STATUS_UNDEF;
+	chip->clock_state = GD_CLOCK_UNDEF;
+	/* Since this card has no ASIC, mark it as loaded so everything
+	   works OK */
+	chip->asic_loaded = true;
+	chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL |
+		ECHO_CLOCK_BIT_SPDIF;
+
+	if ((err = load_firmware(chip)) < 0)
+		return err;
+	chip->bad_board = false;
+
+	return err;
+}
+
+
+
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+	chip->professional_spdif = false;
+	return init_line_levels(chip);
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+	u32 clocks_from_dsp, clock_bits;
+
+	/* Map the DSP clock detect bits to the generic driver clock
+	   detect bits */
+	clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+	clock_bits = ECHO_CLOCK_BIT_INTERNAL;
+
+	if (clocks_from_dsp & GLDM_CLOCK_DETECT_BIT_SPDIF)
+		clock_bits |= ECHO_CLOCK_BIT_SPDIF;
+
+	return clock_bits;
+}
+
+
+
+/* The Gina20 has no ASIC. Just do nothing */
+static int load_asic(struct echoaudio *chip)
+{
+	return 0;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+	u8 clock_state, spdif_status;
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	switch (rate) {
+	case 44100:
+		clock_state = GD_CLOCK_44;
+		spdif_status = GD_SPDIF_STATUS_44;
+		break;
+	case 48000:
+		clock_state = GD_CLOCK_48;
+		spdif_status = GD_SPDIF_STATUS_48;
+		break;
+	default:
+		clock_state = GD_CLOCK_NOCHANGE;
+		spdif_status = GD_SPDIF_STATUS_NOCHANGE;
+		break;
+	}
+
+	if (chip->clock_state == clock_state)
+		clock_state = GD_CLOCK_NOCHANGE;
+	if (spdif_status == chip->spdif_status)
+		spdif_status = GD_SPDIF_STATUS_NOCHANGE;
+
+	chip->comm_page->sample_rate = cpu_to_le32(rate);
+	chip->comm_page->gd_clock_state = clock_state;
+	chip->comm_page->gd_spdif_status = spdif_status;
+	chip->comm_page->gd_resampler_state = 3;	/* magic number - should always be 3 */
+
+	/* Save the new audio state if it changed */
+	if (clock_state != GD_CLOCK_NOCHANGE)
+		chip->clock_state = clock_state;
+	if (spdif_status != GD_SPDIF_STATUS_NOCHANGE)
+		chip->spdif_status = spdif_status;
+	chip->sample_rate = rate;
+
+	clear_handshake(chip);
+	return send_vector(chip, DSP_VC_SET_GD_AUDIO_STATE);
+}
+
+
+
+static int set_input_clock(struct echoaudio *chip, u16 clock)
+{
+
+	switch (clock) {
+	case ECHO_CLOCK_INTERNAL:
+		/* Reset the audio state to unknown (just in case) */
+		chip->clock_state = GD_CLOCK_UNDEF;
+		chip->spdif_status = GD_SPDIF_STATUS_UNDEF;
+		set_sample_rate(chip, chip->sample_rate);
+		chip->input_clock = clock;
+		break;
+	case ECHO_CLOCK_SPDIF:
+		chip->comm_page->gd_clock_state = GD_CLOCK_SPDIFIN;
+		chip->comm_page->gd_spdif_status = GD_SPDIF_STATUS_NOCHANGE;
+		clear_handshake(chip);
+		send_vector(chip, DSP_VC_SET_GD_AUDIO_STATE);
+		chip->clock_state = GD_CLOCK_SPDIFIN;
+		chip->input_clock = clock;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+
+
+/* Set input bus gain (one unit is 0.5dB !) */
+static int set_input_gain(struct echoaudio *chip, u16 input, int gain)
+{
+	if (snd_BUG_ON(input >= num_busses_in(chip)))
+		return -EINVAL;
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	chip->input_gain[input] = gain;
+	gain += GL20_INPUT_GAIN_MAGIC_NUMBER;
+	chip->comm_page->line_in_level[input] = gain;
+	return 0;
+}
+
+
+
+/* Tell the DSP to reread the flags from the comm page */
+static int update_flags(struct echoaudio *chip)
+{
+	if (wait_handshake(chip))
+		return -EIO;
+	clear_handshake(chip);
+	return send_vector(chip, DSP_VC_UPDATE_FLAGS);
+}
+
+
+
+static int set_professional_spdif(struct echoaudio *chip, char prof)
+{
+	if (prof)
+		chip->comm_page->flags |=
+			cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF);
+	else
+		chip->comm_page->flags &=
+			~cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF);
+	chip->professional_spdif = prof;
+	return update_flags(chip);
+}
diff --git a/sound/pci/echoaudio/gina24.c b/sound/pci/echoaudio/gina24.c
new file mode 100644
index 000000000..eff69e83c
--- /dev/null
+++ b/sound/pci/echoaudio/gina24.c
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  ALSA driver for Echoaudio soundcards.
+ *  Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ */
+
+#define ECHO24_FAMILY
+#define ECHOCARD_GINA24
+#define ECHOCARD_NAME "Gina24"
+#define ECHOCARD_HAS_MONITOR
+#define ECHOCARD_HAS_ASIC
+#define ECHOCARD_HAS_INPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_SUPER_INTERLEAVE
+#define ECHOCARD_HAS_DIGITAL_IO
+#define ECHOCARD_HAS_DIGITAL_IN_AUTOMUTE
+#define ECHOCARD_HAS_DIGITAL_MODE_SWITCH
+#define ECHOCARD_HAS_EXTERNAL_CLOCK
+#define ECHOCARD_HAS_ADAT	6
+#define ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT	0	/* 8 */
+#define PX_DIGITAL_OUT	8	/* 8 */
+#define PX_ANALOG_IN	16	/* 2 */
+#define PX_DIGITAL_IN	18	/* 8 */
+#define PX_NUM		26
+
+/* Bus indexes */
+#define BX_ANALOG_OUT	0	/* 8 */
+#define BX_DIGITAL_OUT	8	/* 8 */
+#define BX_ANALOG_IN	16	/* 2 */
+#define BX_DIGITAL_IN	18	/* 8 */
+#define BX_NUM		26
+
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/tlv.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <linux/atomic.h>
+#include "echoaudio.h"
+
+MODULE_FIRMWARE("ea/loader_dsp.fw");
+MODULE_FIRMWARE("ea/gina24_301_dsp.fw");
+MODULE_FIRMWARE("ea/gina24_361_dsp.fw");
+MODULE_FIRMWARE("ea/gina24_301_asic.fw");
+MODULE_FIRMWARE("ea/gina24_361_asic.fw");
+
+#define FW_361_LOADER		0
+#define FW_GINA24_301_DSP	1
+#define FW_GINA24_361_DSP	2
+#define FW_GINA24_301_ASIC	3
+#define FW_GINA24_361_ASIC	4
+
+static const struct firmware card_fw[] = {
+	{0, "loader_dsp.fw"},
+	{0, "gina24_301_dsp.fw"},
+	{0, "gina24_361_dsp.fw"},
+	{0, "gina24_301_asic.fw"},
+	{0, "gina24_361_asic.fw"}
+};
+
+static const struct pci_device_id snd_echo_ids[] = {
+	{0x1057, 0x1801, 0xECC0, 0x0050, 0, 0, 0},	/* DSP 56301 Gina24 rev.0 */
+	{0x1057, 0x1801, 0xECC0, 0x0051, 0, 0, 0},	/* DSP 56301 Gina24 rev.1 */
+	{0x1057, 0x3410, 0xECC0, 0x0050, 0, 0, 0},	/* DSP 56361 Gina24 rev.0 */
+	{0x1057, 0x3410, 0xECC0, 0x0051, 0, 0, 0},	/* DSP 56361 Gina24 rev.1 */
+	{0,}
+};
+
+static const struct snd_pcm_hardware pcm_hardware_skel = {
+	.info = SNDRV_PCM_INFO_MMAP |
+		SNDRV_PCM_INFO_INTERLEAVED |
+		SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_PAUSE |
+		SNDRV_PCM_INFO_SYNC_START,
+	.formats =	SNDRV_PCM_FMTBIT_U8 |
+			SNDRV_PCM_FMTBIT_S16_LE |
+			SNDRV_PCM_FMTBIT_S24_3LE |
+			SNDRV_PCM_FMTBIT_S32_LE |
+			SNDRV_PCM_FMTBIT_S32_BE,
+	.rates = 	SNDRV_PCM_RATE_8000_48000 |
+			SNDRV_PCM_RATE_88200 |
+			SNDRV_PCM_RATE_96000,
+	.rate_min = 8000,
+	.rate_max = 96000,
+	.channels_min = 1,
+	.channels_max = 8,
+	.buffer_bytes_max = 262144,
+	.period_bytes_min = 32,
+	.period_bytes_max = 131072,
+	.periods_min = 2,
+	.periods_max = 220,
+	/* One page (4k) contains 512 instructions. I don't know if the hw
+	supports lists longer than this. In this case periods_max=220 is a
+	safe limit to make sure the list never exceeds 512 instructions.
+	220 ~= (512 - 1 - (BUFFER_BYTES_MAX / PAGE_SIZE)) / 2 */
+};
+
+#include "gina24_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio_gml.c"
+#include "echoaudio.c"
diff --git a/sound/pci/echoaudio/gina24_dsp.c b/sound/pci/echoaudio/gina24_dsp.c
new file mode 100644
index 000000000..8eff2b4f5
--- /dev/null
+++ b/sound/pci/echoaudio/gina24_dsp.c
@@ -0,0 +1,345 @@
+/****************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+   *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int write_control_reg(struct echoaudio *chip, u32 value, char force);
+static int set_input_clock(struct echoaudio *chip, u16 clock);
+static int set_professional_spdif(struct echoaudio *chip, char prof);
+static int set_digital_mode(struct echoaudio *chip, u8 mode);
+static int load_asic_generic(struct echoaudio *chip, u32 cmd, short asic);
+static int check_asic_status(struct echoaudio *chip);
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+	int err;
+
+	if (snd_BUG_ON((subdevice_id & 0xfff0) != GINA24))
+		return -ENODEV;
+
+	if ((err = init_dsp_comm_page(chip))) {
+		dev_err(chip->card->dev,
+			"init_hw - could not initialize DSP comm page\n");
+		return err;
+	}
+
+	chip->device_id = device_id;
+	chip->subdevice_id = subdevice_id;
+	chip->bad_board = true;
+	chip->input_clock_types =
+		ECHO_CLOCK_BIT_INTERNAL | ECHO_CLOCK_BIT_SPDIF |
+		ECHO_CLOCK_BIT_ESYNC | ECHO_CLOCK_BIT_ESYNC96 |
+		ECHO_CLOCK_BIT_ADAT;
+
+	/* Gina24 comes in both '301 and '361 flavors */
+	if (chip->device_id == DEVICE_ID_56361) {
+		chip->dsp_code_to_load = FW_GINA24_361_DSP;
+		chip->digital_modes =
+			ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA |
+			ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL |
+			ECHOCAPS_HAS_DIGITAL_MODE_ADAT;
+	} else {
+		chip->dsp_code_to_load = FW_GINA24_301_DSP;
+		chip->digital_modes =
+			ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA |
+			ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL |
+			ECHOCAPS_HAS_DIGITAL_MODE_ADAT |
+			ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_CDROM;
+	}
+
+	if ((err = load_firmware(chip)) < 0)
+		return err;
+	chip->bad_board = false;
+
+	return err;
+}
+
+
+
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+	chip->digital_mode = DIGITAL_MODE_SPDIF_RCA;
+	chip->professional_spdif = false;
+	chip->digital_in_automute = true;
+	return init_line_levels(chip);
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+	u32 clocks_from_dsp, clock_bits;
+
+	/* Map the DSP clock detect bits to the generic driver clock
+	   detect bits */
+	clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+	clock_bits = ECHO_CLOCK_BIT_INTERNAL;
+
+	if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF)
+		clock_bits |= ECHO_CLOCK_BIT_SPDIF;
+
+	if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_ADAT)
+		clock_bits |= ECHO_CLOCK_BIT_ADAT;
+
+	if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_ESYNC)
+		clock_bits |= ECHO_CLOCK_BIT_ESYNC | ECHO_CLOCK_BIT_ESYNC96;
+
+	return clock_bits;
+}
+
+
+
+/* Gina24 has an ASIC on the PCI card which must be loaded for anything
+interesting to happen. */
+static int load_asic(struct echoaudio *chip)
+{
+	u32 control_reg;
+	int err;
+	short asic;
+
+	if (chip->asic_loaded)
+		return 1;
+
+	/* Give the DSP a few milliseconds to settle down */
+	mdelay(10);
+
+	/* Pick the correct ASIC for '301 or '361 Gina24 */
+	if (chip->device_id == DEVICE_ID_56361)
+		asic = FW_GINA24_361_ASIC;
+	else
+		asic = FW_GINA24_301_ASIC;
+
+	err = load_asic_generic(chip, DSP_FNC_LOAD_GINA24_ASIC, asic);
+	if (err < 0)
+		return err;
+
+	chip->asic_code = asic;
+
+	/* Now give the new ASIC a little time to set up */
+	mdelay(10);
+	/* See if it worked */
+	err = check_asic_status(chip);
+
+	/* Set up the control register if the load succeeded -
+	   48 kHz, internal clock, S/PDIF RCA mode */
+	if (!err) {
+		control_reg = GML_CONVERTER_ENABLE | GML_48KHZ;
+		err = write_control_reg(chip, control_reg, true);
+	}
+	return err;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+	u32 control_reg, clock;
+
+	if (snd_BUG_ON(rate >= 50000 &&
+		       chip->digital_mode == DIGITAL_MODE_ADAT))
+		return -EINVAL;
+
+	/* Only set the clock for internal mode. */
+	if (chip->input_clock != ECHO_CLOCK_INTERNAL) {
+		dev_warn(chip->card->dev,
+			 "Cannot set sample rate - clock not set to CLK_CLOCKININTERNAL\n");
+		/* Save the rate anyhow */
+		chip->comm_page->sample_rate = cpu_to_le32(rate);
+		chip->sample_rate = rate;
+		return 0;
+	}
+
+	clock = 0;
+
+	control_reg = le32_to_cpu(chip->comm_page->control_register);
+	control_reg &= GML_CLOCK_CLEAR_MASK & GML_SPDIF_RATE_CLEAR_MASK;
+
+	switch (rate) {
+	case 96000:
+		clock = GML_96KHZ;
+		break;
+	case 88200:
+		clock = GML_88KHZ;
+		break;
+	case 48000:
+		clock = GML_48KHZ | GML_SPDIF_SAMPLE_RATE1;
+		break;
+	case 44100:
+		clock = GML_44KHZ;
+		/* Professional mode ? */
+		if (control_reg & GML_SPDIF_PRO_MODE)
+			clock |= GML_SPDIF_SAMPLE_RATE0;
+		break;
+	case 32000:
+		clock = GML_32KHZ | GML_SPDIF_SAMPLE_RATE0 |
+			GML_SPDIF_SAMPLE_RATE1;
+		break;
+	case 22050:
+		clock = GML_22KHZ;
+		break;
+	case 16000:
+		clock = GML_16KHZ;
+		break;
+	case 11025:
+		clock = GML_11KHZ;
+		break;
+	case 8000:
+		clock = GML_8KHZ;
+		break;
+	default:
+		dev_err(chip->card->dev,
+			"set_sample_rate: %d invalid!\n", rate);
+		return -EINVAL;
+	}
+
+	control_reg |= clock;
+
+	chip->comm_page->sample_rate = cpu_to_le32(rate);	/* ignored by the DSP */
+	chip->sample_rate = rate;
+	dev_dbg(chip->card->dev, "set_sample_rate: %d clock %d\n", rate, clock);
+
+	return write_control_reg(chip, control_reg, false);
+}
+
+
+
+static int set_input_clock(struct echoaudio *chip, u16 clock)
+{
+	u32 control_reg, clocks_from_dsp;
+
+
+	/* Mask off the clock select bits */
+	control_reg = le32_to_cpu(chip->comm_page->control_register) &
+		GML_CLOCK_CLEAR_MASK;
+	clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+	switch (clock) {
+	case ECHO_CLOCK_INTERNAL:
+		chip->input_clock = ECHO_CLOCK_INTERNAL;
+		return set_sample_rate(chip, chip->sample_rate);
+	case ECHO_CLOCK_SPDIF:
+		if (chip->digital_mode == DIGITAL_MODE_ADAT)
+			return -EAGAIN;
+		control_reg |= GML_SPDIF_CLOCK;
+		if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF96)
+			control_reg |= GML_DOUBLE_SPEED_MODE;
+		else
+			control_reg &= ~GML_DOUBLE_SPEED_MODE;
+		break;
+	case ECHO_CLOCK_ADAT:
+		if (chip->digital_mode != DIGITAL_MODE_ADAT)
+			return -EAGAIN;
+		control_reg |= GML_ADAT_CLOCK;
+		control_reg &= ~GML_DOUBLE_SPEED_MODE;
+		break;
+	case ECHO_CLOCK_ESYNC:
+		control_reg |= GML_ESYNC_CLOCK;
+		control_reg &= ~GML_DOUBLE_SPEED_MODE;
+		break;
+	case ECHO_CLOCK_ESYNC96:
+		control_reg |= GML_ESYNC_CLOCK | GML_DOUBLE_SPEED_MODE;
+		break;
+	default:
+		dev_err(chip->card->dev,
+			"Input clock 0x%x not supported for Gina24\n", clock);
+		return -EINVAL;
+	}
+
+	chip->input_clock = clock;
+	return write_control_reg(chip, control_reg, true);
+}
+
+
+
+static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode)
+{
+	u32 control_reg;
+	int err, incompatible_clock;
+
+	/* Set clock to "internal" if it's not compatible with the new mode */
+	incompatible_clock = false;
+	switch (mode) {
+	case DIGITAL_MODE_SPDIF_OPTICAL:
+	case DIGITAL_MODE_SPDIF_CDROM:
+	case DIGITAL_MODE_SPDIF_RCA:
+		if (chip->input_clock == ECHO_CLOCK_ADAT)
+			incompatible_clock = true;
+		break;
+	case DIGITAL_MODE_ADAT:
+		if (chip->input_clock == ECHO_CLOCK_SPDIF)
+			incompatible_clock = true;
+		break;
+	default:
+		dev_err(chip->card->dev,
+			"Digital mode not supported: %d\n", mode);
+		return -EINVAL;
+	}
+
+	spin_lock_irq(&chip->lock);
+
+	if (incompatible_clock) {	/* Switch to 48KHz, internal */
+		chip->sample_rate = 48000;
+		set_input_clock(chip, ECHO_CLOCK_INTERNAL);
+	}
+
+	/* Clear the current digital mode */
+	control_reg = le32_to_cpu(chip->comm_page->control_register);
+	control_reg &= GML_DIGITAL_MODE_CLEAR_MASK;
+
+	/* Tweak the control reg */
+	switch (mode) {
+	case DIGITAL_MODE_SPDIF_OPTICAL:
+		control_reg |= GML_SPDIF_OPTICAL_MODE;
+		break;
+	case DIGITAL_MODE_SPDIF_CDROM:
+		/* '361 Gina24 cards do not have the S/PDIF CD-ROM mode */
+		if (chip->device_id == DEVICE_ID_56301)
+			control_reg |= GML_SPDIF_CDROM_MODE;
+		break;
+	case DIGITAL_MODE_SPDIF_RCA:
+		/* GML_SPDIF_OPTICAL_MODE bit cleared */
+		break;
+	case DIGITAL_MODE_ADAT:
+		control_reg |= GML_ADAT_MODE;
+		control_reg &= ~GML_DOUBLE_SPEED_MODE;
+		break;
+	}
+
+	err = write_control_reg(chip, control_reg, true);
+	spin_unlock_irq(&chip->lock);
+	if (err < 0)
+		return err;
+	chip->digital_mode = mode;
+
+	dev_dbg(chip->card->dev,
+		"set_digital_mode to %d\n", chip->digital_mode);
+	return incompatible_clock;
+}
diff --git a/sound/pci/echoaudio/indigo.c b/sound/pci/echoaudio/indigo.c
new file mode 100644
index 000000000..a9f2efc58
--- /dev/null
+++ b/sound/pci/echoaudio/indigo.c
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  ALSA driver for Echoaudio soundcards.
+ *  Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ */
+
+#define INDIGO_FAMILY
+#define ECHOCARD_INDIGO
+#define ECHOCARD_NAME "Indigo"
+#define ECHOCARD_HAS_SUPER_INTERLEAVE
+#define ECHOCARD_HAS_VMIXER
+#define ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT	0	/* 8 */
+#define PX_DIGITAL_OUT	8	/* 0 */
+#define PX_ANALOG_IN	8	/* 0 */
+#define PX_DIGITAL_IN	8	/* 0 */
+#define PX_NUM		8
+
+/* Bus indexes */
+#define BX_ANALOG_OUT	0	/* 2 */
+#define BX_DIGITAL_OUT	2	/* 0 */
+#define BX_ANALOG_IN	2	/* 0 */
+#define BX_DIGITAL_IN	2	/* 0 */
+#define BX_NUM		2
+
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/tlv.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <linux/atomic.h>
+#include "echoaudio.h"
+
+MODULE_FIRMWARE("ea/loader_dsp.fw");
+MODULE_FIRMWARE("ea/indigo_dsp.fw");
+
+#define FW_361_LOADER	0
+#define FW_INDIGO_DSP	1
+
+static const struct firmware card_fw[] = {
+	{0, "loader_dsp.fw"},
+	{0, "indigo_dsp.fw"}
+};
+
+static const struct pci_device_id snd_echo_ids[] = {
+	{0x1057, 0x3410, 0xECC0, 0x0090, 0, 0, 0},	/* Indigo */
+	{0,}
+};
+
+static const struct snd_pcm_hardware pcm_hardware_skel = {
+	.info = SNDRV_PCM_INFO_MMAP |
+		SNDRV_PCM_INFO_INTERLEAVED |
+		SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_PAUSE |
+		SNDRV_PCM_INFO_SYNC_START,
+	.formats =	SNDRV_PCM_FMTBIT_U8 |
+			SNDRV_PCM_FMTBIT_S16_LE |
+			SNDRV_PCM_FMTBIT_S24_3LE |
+			SNDRV_PCM_FMTBIT_S32_LE |
+			SNDRV_PCM_FMTBIT_S32_BE,
+	.rates = 	SNDRV_PCM_RATE_32000 |
+			SNDRV_PCM_RATE_44100 |
+			SNDRV_PCM_RATE_48000 |
+			SNDRV_PCM_RATE_88200 |
+			SNDRV_PCM_RATE_96000,
+	.rate_min = 32000,
+	.rate_max = 96000,
+	.channels_min = 1,
+	.channels_max = 8,
+	.buffer_bytes_max = 262144,
+	.period_bytes_min = 32,
+	.period_bytes_max = 131072,
+	.periods_min = 2,
+	.periods_max = 220,
+};
+
+#include "indigo_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio.c"
+
diff --git a/sound/pci/echoaudio/indigo_dsp.c b/sound/pci/echoaudio/indigo_dsp.c
new file mode 100644
index 000000000..c97dc83bb
--- /dev/null
+++ b/sound/pci/echoaudio/indigo_dsp.c
@@ -0,0 +1,165 @@
+/****************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+   *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int set_vmixer_gain(struct echoaudio *chip, u16 output, u16 pipe,
+			   int gain);
+static int update_vmixer_level(struct echoaudio *chip);
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+	int err;
+
+	if (snd_BUG_ON((subdevice_id & 0xfff0) != INDIGO))
+		return -ENODEV;
+
+	if ((err = init_dsp_comm_page(chip))) {
+		dev_err(chip->card->dev,
+			"init_hw - could not initialize DSP comm page\n");
+		return err;
+	}
+
+	chip->device_id = device_id;
+	chip->subdevice_id = subdevice_id;
+	chip->bad_board = true;
+	chip->dsp_code_to_load = FW_INDIGO_DSP;
+	/* Since this card has no ASIC, mark it as loaded so everything
+	   works OK */
+	chip->asic_loaded = true;
+	chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL;
+
+	if ((err = load_firmware(chip)) < 0)
+		return err;
+	chip->bad_board = false;
+
+	return err;
+}
+
+
+
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+	return init_line_levels(chip);
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+	return ECHO_CLOCK_BIT_INTERNAL;
+}
+
+
+
+/* The Indigo has no ASIC. Just do nothing */
+static int load_asic(struct echoaudio *chip)
+{
+	return 0;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+	u32 control_reg;
+
+	switch (rate) {
+	case 96000:
+		control_reg = MIA_96000;
+		break;
+	case 88200:
+		control_reg = MIA_88200;
+		break;
+	case 48000:
+		control_reg = MIA_48000;
+		break;
+	case 44100:
+		control_reg = MIA_44100;
+		break;
+	case 32000:
+		control_reg = MIA_32000;
+		break;
+	default:
+		dev_err(chip->card->dev,
+			"set_sample_rate: %d invalid!\n", rate);
+		return -EINVAL;
+	}
+
+	/* Set the control register if it has changed */
+	if (control_reg != le32_to_cpu(chip->comm_page->control_register)) {
+		if (wait_handshake(chip))
+			return -EIO;
+
+		chip->comm_page->sample_rate = cpu_to_le32(rate);	/* ignored by the DSP */
+		chip->comm_page->control_register = cpu_to_le32(control_reg);
+		chip->sample_rate = rate;
+
+		clear_handshake(chip);
+		return send_vector(chip, DSP_VC_UPDATE_CLOCKS);
+	}
+	return 0;
+}
+
+
+
+/* This function routes the sound from a virtual channel to a real output */
+static int set_vmixer_gain(struct echoaudio *chip, u16 output, u16 pipe,
+			   int gain)
+{
+	int index;
+
+	if (snd_BUG_ON(pipe >= num_pipes_out(chip) ||
+		       output >= num_busses_out(chip)))
+		return -EINVAL;
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	chip->vmixer_gain[output][pipe] = gain;
+	index = output * num_pipes_out(chip) + pipe;
+	chip->comm_page->vmixer[index] = gain;
+
+	dev_dbg(chip->card->dev,
+		"set_vmixer_gain: pipe %d, out %d = %d\n", pipe, output, gain);
+	return 0;
+}
+
+
+
+/* Tell the DSP to read and update virtual mixer levels in comm page. */
+static int update_vmixer_level(struct echoaudio *chip)
+{
+	if (wait_handshake(chip))
+		return -EIO;
+	clear_handshake(chip);
+	return send_vector(chip, DSP_VC_SET_VMIXER_GAIN);
+}
+
diff --git a/sound/pci/echoaudio/indigo_express_dsp.c b/sound/pci/echoaudio/indigo_express_dsp.c
new file mode 100644
index 000000000..ceda2d704
--- /dev/null
+++ b/sound/pci/echoaudio/indigo_express_dsp.c
@@ -0,0 +1,122 @@
+/************************************************************************
+
+This file is part of Echo Digital Audio's generic driver library.
+Copyright Echo Digital Audio Corporation (c) 1998 - 2005
+All rights reserved
+www.echoaudio.com
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+*************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+*************************************************************************/
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+	u32 clock, control_reg, old_control_reg;
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	old_control_reg = le32_to_cpu(chip->comm_page->control_register);
+	control_reg = old_control_reg & ~INDIGO_EXPRESS_CLOCK_MASK;
+
+	switch (rate) {
+	case 32000:
+		clock = INDIGO_EXPRESS_32000;
+		break;
+	case 44100:
+		clock = INDIGO_EXPRESS_44100;
+		break;
+	case 48000:
+		clock = INDIGO_EXPRESS_48000;
+		break;
+	case 64000:
+		clock = INDIGO_EXPRESS_32000|INDIGO_EXPRESS_DOUBLE_SPEED;
+		break;
+	case 88200:
+		clock = INDIGO_EXPRESS_44100|INDIGO_EXPRESS_DOUBLE_SPEED;
+		break;
+	case 96000:
+		clock = INDIGO_EXPRESS_48000|INDIGO_EXPRESS_DOUBLE_SPEED;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	control_reg |= clock;
+	if (control_reg != old_control_reg) {
+		dev_dbg(chip->card->dev,
+			"set_sample_rate: %d clock %d\n", rate, clock);
+		chip->comm_page->control_register = cpu_to_le32(control_reg);
+		chip->sample_rate = rate;
+		clear_handshake(chip);
+		return send_vector(chip, DSP_VC_UPDATE_CLOCKS);
+	}
+	return 0;
+}
+
+
+
+/* This function routes the sound from a virtual channel to a real output */
+static int set_vmixer_gain(struct echoaudio *chip, u16 output, u16 pipe,
+			   int gain)
+{
+	int index;
+
+	if (snd_BUG_ON(pipe >= num_pipes_out(chip) ||
+		       output >= num_busses_out(chip)))
+		return -EINVAL;
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	chip->vmixer_gain[output][pipe] = gain;
+	index = output * num_pipes_out(chip) + pipe;
+	chip->comm_page->vmixer[index] = gain;
+
+	dev_dbg(chip->card->dev,
+		"set_vmixer_gain: pipe %d, out %d = %d\n", pipe, output, gain);
+	return 0;
+}
+
+
+
+/* Tell the DSP to read and update virtual mixer levels in comm page. */
+static int update_vmixer_level(struct echoaudio *chip)
+{
+	if (wait_handshake(chip))
+		return -EIO;
+	clear_handshake(chip);
+	return send_vector(chip, DSP_VC_SET_VMIXER_GAIN);
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+	return ECHO_CLOCK_BIT_INTERNAL;
+}
+
+
+
+/* The IndigoIO has no ASIC. Just do nothing */
+static int load_asic(struct echoaudio *chip)
+{
+	return 0;
+}
diff --git a/sound/pci/echoaudio/indigodj.c b/sound/pci/echoaudio/indigodj.c
new file mode 100644
index 000000000..14e9769ce
--- /dev/null
+++ b/sound/pci/echoaudio/indigodj.c
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  ALSA driver for Echoaudio soundcards.
+ *  Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ */
+
+#define INDIGO_FAMILY
+#define ECHOCARD_INDIGO_DJ
+#define ECHOCARD_NAME "Indigo DJ"
+#define ECHOCARD_HAS_SUPER_INTERLEAVE
+#define ECHOCARD_HAS_VMIXER
+#define ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT	0	/* 8 */
+#define PX_DIGITAL_OUT	8	/* 0 */
+#define PX_ANALOG_IN	8	/* 0 */
+#define PX_DIGITAL_IN	8	/* 0 */
+#define PX_NUM		8
+
+/* Bus indexes */
+#define BX_ANALOG_OUT	0	/* 4 */
+#define BX_DIGITAL_OUT	4	/* 0 */
+#define BX_ANALOG_IN	4	/* 0 */
+#define BX_DIGITAL_IN	4	/* 0 */
+#define BX_NUM		4
+
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/tlv.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <linux/atomic.h>
+#include "echoaudio.h"
+
+MODULE_FIRMWARE("ea/loader_dsp.fw");
+MODULE_FIRMWARE("ea/indigo_dj_dsp.fw");
+
+#define FW_361_LOADER		0
+#define FW_INDIGO_DJ_DSP	1
+
+static const struct firmware card_fw[] = {
+	{0, "loader_dsp.fw"},
+	{0, "indigo_dj_dsp.fw"}
+};
+
+static const struct pci_device_id snd_echo_ids[] = {
+	{0x1057, 0x3410, 0xECC0, 0x00B0, 0, 0, 0},	/* Indigo DJ*/
+	{0,}
+};
+
+static const struct snd_pcm_hardware pcm_hardware_skel = {
+	.info = SNDRV_PCM_INFO_MMAP |
+		SNDRV_PCM_INFO_INTERLEAVED |
+		SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_PAUSE |
+		SNDRV_PCM_INFO_SYNC_START,
+	.formats =	SNDRV_PCM_FMTBIT_U8 |
+			SNDRV_PCM_FMTBIT_S16_LE |
+			SNDRV_PCM_FMTBIT_S24_3LE |
+			SNDRV_PCM_FMTBIT_S32_LE |
+			SNDRV_PCM_FMTBIT_S32_BE,
+	.rates = 	SNDRV_PCM_RATE_32000 |
+			SNDRV_PCM_RATE_44100 |
+			SNDRV_PCM_RATE_48000 |
+			SNDRV_PCM_RATE_88200 |
+			SNDRV_PCM_RATE_96000,
+	.rate_min = 32000,
+	.rate_max = 96000,
+	.channels_min = 1,
+	.channels_max = 4,
+	.buffer_bytes_max = 262144,
+	.period_bytes_min = 32,
+	.period_bytes_max = 131072,
+	.periods_min = 2,
+	.periods_max = 220,
+};
+
+#include "indigodj_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio.c"
+
diff --git a/sound/pci/echoaudio/indigodj_dsp.c b/sound/pci/echoaudio/indigodj_dsp.c
new file mode 100644
index 000000000..2428b35f4
--- /dev/null
+++ b/sound/pci/echoaudio/indigodj_dsp.c
@@ -0,0 +1,165 @@
+/****************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+   *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int set_vmixer_gain(struct echoaudio *chip, u16 output, u16 pipe,
+			   int gain);
+static int update_vmixer_level(struct echoaudio *chip);
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+	int err;
+
+	if (snd_BUG_ON((subdevice_id & 0xfff0) != INDIGO_DJ))
+		return -ENODEV;
+
+	if ((err = init_dsp_comm_page(chip))) {
+		dev_err(chip->card->dev,
+			"init_hw - could not initialize DSP comm page\n");
+		return err;
+	}
+
+	chip->device_id = device_id;
+	chip->subdevice_id = subdevice_id;
+	chip->bad_board = true;
+	chip->dsp_code_to_load = FW_INDIGO_DJ_DSP;
+	/* Since this card has no ASIC, mark it as loaded so everything
+	   works OK */
+	chip->asic_loaded = true;
+	chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL;
+
+	if ((err = load_firmware(chip)) < 0)
+		return err;
+	chip->bad_board = false;
+
+	return err;
+}
+
+
+
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+	return init_line_levels(chip);
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+	return ECHO_CLOCK_BIT_INTERNAL;
+}
+
+
+
+/* The IndigoDJ has no ASIC. Just do nothing */
+static int load_asic(struct echoaudio *chip)
+{
+	return 0;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+	u32 control_reg;
+
+	switch (rate) {
+	case 96000:
+		control_reg = MIA_96000;
+		break;
+	case 88200:
+		control_reg = MIA_88200;
+		break;
+	case 48000:
+		control_reg = MIA_48000;
+		break;
+	case 44100:
+		control_reg = MIA_44100;
+		break;
+	case 32000:
+		control_reg = MIA_32000;
+		break;
+	default:
+		dev_err(chip->card->dev,
+			"set_sample_rate: %d invalid!\n", rate);
+		return -EINVAL;
+	}
+
+	/* Set the control register if it has changed */
+	if (control_reg != le32_to_cpu(chip->comm_page->control_register)) {
+		if (wait_handshake(chip))
+			return -EIO;
+
+		chip->comm_page->sample_rate = cpu_to_le32(rate);	/* ignored by the DSP */
+		chip->comm_page->control_register = cpu_to_le32(control_reg);
+		chip->sample_rate = rate;
+
+		clear_handshake(chip);
+		return send_vector(chip, DSP_VC_UPDATE_CLOCKS);
+	}
+	return 0;
+}
+
+
+
+/* This function routes the sound from a virtual channel to a real output */
+static int set_vmixer_gain(struct echoaudio *chip, u16 output, u16 pipe,
+			   int gain)
+{
+	int index;
+
+	if (snd_BUG_ON(pipe >= num_pipes_out(chip) ||
+		       output >= num_busses_out(chip)))
+		return -EINVAL;
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	chip->vmixer_gain[output][pipe] = gain;
+	index = output * num_pipes_out(chip) + pipe;
+	chip->comm_page->vmixer[index] = gain;
+
+	dev_dbg(chip->card->dev,
+		"set_vmixer_gain: pipe %d, out %d = %d\n", pipe, output, gain);
+	return 0;
+}
+
+
+
+/* Tell the DSP to read and update virtual mixer levels in comm page. */
+static int update_vmixer_level(struct echoaudio *chip)
+{
+	if (wait_handshake(chip))
+		return -EIO;
+	clear_handshake(chip);
+	return send_vector(chip, DSP_VC_SET_VMIXER_GAIN);
+}
+
diff --git a/sound/pci/echoaudio/indigodjx.c b/sound/pci/echoaudio/indigodjx.c
new file mode 100644
index 000000000..a14a7dc8c
--- /dev/null
+++ b/sound/pci/echoaudio/indigodjx.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  ALSA driver for Echoaudio soundcards.
+ *  Copyright (C) 2009 Giuliano Pochini <pochini@shiny.it>
+ */
+
+#define INDIGO_FAMILY
+#define ECHOCARD_INDIGO_DJX
+#define ECHOCARD_NAME "Indigo DJx"
+#define ECHOCARD_HAS_SUPER_INTERLEAVE
+#define ECHOCARD_HAS_VMIXER
+#define ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT	0	/* 8 */
+#define PX_DIGITAL_OUT	8	/* 0 */
+#define PX_ANALOG_IN	8	/* 0 */
+#define PX_DIGITAL_IN	8	/* 0 */
+#define PX_NUM		8
+
+/* Bus indexes */
+#define BX_ANALOG_OUT	0	/* 4 */
+#define BX_DIGITAL_OUT	4	/* 0 */
+#define BX_ANALOG_IN	4	/* 0 */
+#define BX_DIGITAL_IN	4	/* 0 */
+#define BX_NUM		4
+
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/tlv.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <linux/atomic.h>
+#include "echoaudio.h"
+
+MODULE_FIRMWARE("ea/loader_dsp.fw");
+MODULE_FIRMWARE("ea/indigo_djx_dsp.fw");
+
+#define FW_361_LOADER		0
+#define FW_INDIGO_DJX_DSP	1
+
+static const struct firmware card_fw[] = {
+	{0, "loader_dsp.fw"},
+	{0, "indigo_djx_dsp.fw"}
+};
+
+static const struct pci_device_id snd_echo_ids[] = {
+	{0x1057, 0x3410, 0xECC0, 0x00E0, 0, 0, 0},	/* Indigo DJx*/
+	{0,}
+};
+
+static const struct snd_pcm_hardware pcm_hardware_skel = {
+	.info = SNDRV_PCM_INFO_MMAP |
+		SNDRV_PCM_INFO_INTERLEAVED |
+		SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_PAUSE |
+		SNDRV_PCM_INFO_SYNC_START,
+	.formats =	SNDRV_PCM_FMTBIT_U8 |
+			SNDRV_PCM_FMTBIT_S16_LE |
+			SNDRV_PCM_FMTBIT_S24_3LE |
+			SNDRV_PCM_FMTBIT_S32_LE |
+			SNDRV_PCM_FMTBIT_S32_BE,
+	.rates = 	SNDRV_PCM_RATE_32000 |
+			SNDRV_PCM_RATE_44100 |
+			SNDRV_PCM_RATE_48000 |
+			SNDRV_PCM_RATE_64000 |
+			SNDRV_PCM_RATE_88200 |
+			SNDRV_PCM_RATE_96000,
+	.rate_min = 32000,
+	.rate_max = 96000,
+	.channels_min = 1,
+	.channels_max = 4,
+	.buffer_bytes_max = 262144,
+	.period_bytes_min = 32,
+	.period_bytes_max = 131072,
+	.periods_min = 2,
+	.periods_max = 220,
+};
+
+#include "indigodjx_dsp.c"
+#include "indigo_express_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio.c"
diff --git a/sound/pci/echoaudio/indigodjx_dsp.c b/sound/pci/echoaudio/indigodjx_dsp.c
new file mode 100644
index 000000000..5fbd4a3a3
--- /dev/null
+++ b/sound/pci/echoaudio/indigodjx_dsp.c
@@ -0,0 +1,70 @@
+/************************************************************************
+
+This file is part of Echo Digital Audio's generic driver library.
+Copyright Echo Digital Audio Corporation (c) 1998 - 2005
+All rights reserved
+www.echoaudio.com
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+*************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+*************************************************************************/
+
+static int update_vmixer_level(struct echoaudio *chip);
+static int set_vmixer_gain(struct echoaudio *chip, u16 output,
+			   u16 pipe, int gain);
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+	int err;
+
+	if (snd_BUG_ON((subdevice_id & 0xfff0) != INDIGO_DJX))
+		return -ENODEV;
+
+	err = init_dsp_comm_page(chip);
+	if (err < 0) {
+		dev_err(chip->card->dev,
+			"init_hw - could not initialize DSP comm page\n");
+		return err;
+	}
+
+	chip->device_id = device_id;
+	chip->subdevice_id = subdevice_id;
+	chip->bad_board = true;
+	chip->dsp_code_to_load = FW_INDIGO_DJX_DSP;
+	/* Since this card has no ASIC, mark it as loaded so everything
+	   works OK */
+	chip->asic_loaded = true;
+	chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL;
+
+	err = load_firmware(chip);
+	if (err < 0)
+		return err;
+	chip->bad_board = false;
+
+	return err;
+}
+
+
+
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+	return init_line_levels(chip);
+}
diff --git a/sound/pci/echoaudio/indigoio.c b/sound/pci/echoaudio/indigoio.c
new file mode 100644
index 000000000..97e024450
--- /dev/null
+++ b/sound/pci/echoaudio/indigoio.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  ALSA driver for Echoaudio soundcards.
+ *  Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ */
+
+#define INDIGO_FAMILY
+#define ECHOCARD_INDIGO_IO
+#define ECHOCARD_NAME "Indigo IO"
+#define ECHOCARD_HAS_MONITOR
+#define ECHOCARD_HAS_SUPER_INTERLEAVE
+#define ECHOCARD_HAS_VMIXER
+#define ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT	0	/* 8 */
+#define PX_DIGITAL_OUT	8	/* 0 */
+#define PX_ANALOG_IN	8	/* 2 */
+#define PX_DIGITAL_IN	10	/* 0 */
+#define PX_NUM		10
+
+/* Bus indexes */
+#define BX_ANALOG_OUT	0	/* 2 */
+#define BX_DIGITAL_OUT	2	/* 0 */
+#define BX_ANALOG_IN	2	/* 2 */
+#define BX_DIGITAL_IN	4	/* 0 */
+#define BX_NUM		4
+
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/tlv.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <linux/atomic.h>
+#include "echoaudio.h"
+
+MODULE_FIRMWARE("ea/loader_dsp.fw");
+MODULE_FIRMWARE("ea/indigo_io_dsp.fw");
+
+#define FW_361_LOADER		0
+#define FW_INDIGO_IO_DSP	1
+
+static const struct firmware card_fw[] = {
+	{0, "loader_dsp.fw"},
+	{0, "indigo_io_dsp.fw"}
+};
+
+static const struct pci_device_id snd_echo_ids[] = {
+	{0x1057, 0x3410, 0xECC0, 0x00A0, 0, 0, 0},	/* Indigo IO*/
+	{0,}
+};
+
+static const struct snd_pcm_hardware pcm_hardware_skel = {
+	.info = SNDRV_PCM_INFO_MMAP |
+		SNDRV_PCM_INFO_INTERLEAVED |
+		SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_PAUSE |
+		SNDRV_PCM_INFO_SYNC_START,
+	.formats =	SNDRV_PCM_FMTBIT_U8 |
+			SNDRV_PCM_FMTBIT_S16_LE |
+			SNDRV_PCM_FMTBIT_S24_3LE |
+			SNDRV_PCM_FMTBIT_S32_LE |
+			SNDRV_PCM_FMTBIT_S32_BE,
+	.rates = 	SNDRV_PCM_RATE_32000 |
+			SNDRV_PCM_RATE_44100 |
+			SNDRV_PCM_RATE_48000 |
+			SNDRV_PCM_RATE_88200 |
+			SNDRV_PCM_RATE_96000,
+	.rate_min = 32000,
+	.rate_max = 96000,
+	.channels_min = 1,
+	.channels_max = 8,
+	.buffer_bytes_max = 262144,
+	.period_bytes_min = 32,
+	.period_bytes_max = 131072,
+	.periods_min = 2,
+	.periods_max = 220,
+};
+
+#include "indigoio_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio.c"
+
diff --git a/sound/pci/echoaudio/indigoio_dsp.c b/sound/pci/echoaudio/indigoio_dsp.c
new file mode 100644
index 000000000..79b68ba70
--- /dev/null
+++ b/sound/pci/echoaudio/indigoio_dsp.c
@@ -0,0 +1,135 @@
+/****************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+   *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int set_vmixer_gain(struct echoaudio *chip, u16 output, u16 pipe,
+			   int gain);
+static int update_vmixer_level(struct echoaudio *chip);
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+	int err;
+
+	if (snd_BUG_ON((subdevice_id & 0xfff0) != INDIGO_IO))
+		return -ENODEV;
+
+	if ((err = init_dsp_comm_page(chip))) {
+		dev_err(chip->card->dev,
+			"init_hw - could not initialize DSP comm page\n");
+		return err;
+	}
+
+	chip->device_id = device_id;
+	chip->subdevice_id = subdevice_id;
+	chip->bad_board = true;
+	chip->dsp_code_to_load = FW_INDIGO_IO_DSP;
+	/* Since this card has no ASIC, mark it as loaded so everything
+	   works OK */
+	chip->asic_loaded = true;
+	chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL;
+
+	if ((err = load_firmware(chip)) < 0)
+		return err;
+	chip->bad_board = false;
+
+	return err;
+}
+
+
+
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+	return init_line_levels(chip);
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+	return ECHO_CLOCK_BIT_INTERNAL;
+}
+
+
+
+/* The IndigoIO has no ASIC. Just do nothing */
+static int load_asic(struct echoaudio *chip)
+{
+	return 0;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+	if (wait_handshake(chip))
+		return -EIO;
+
+	chip->sample_rate = rate;
+	chip->comm_page->sample_rate = cpu_to_le32(rate);
+	clear_handshake(chip);
+	return send_vector(chip, DSP_VC_UPDATE_CLOCKS);
+}
+
+
+
+/* This function routes the sound from a virtual channel to a real output */
+static int set_vmixer_gain(struct echoaudio *chip, u16 output, u16 pipe,
+			   int gain)
+{
+	int index;
+
+	if (snd_BUG_ON(pipe >= num_pipes_out(chip) ||
+		       output >= num_busses_out(chip)))
+		return -EINVAL;
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	chip->vmixer_gain[output][pipe] = gain;
+	index = output * num_pipes_out(chip) + pipe;
+	chip->comm_page->vmixer[index] = gain;
+
+	dev_dbg(chip->card->dev,
+		"set_vmixer_gain: pipe %d, out %d = %d\n", pipe, output, gain);
+	return 0;
+}
+
+
+
+/* Tell the DSP to read and update virtual mixer levels in comm page. */
+static int update_vmixer_level(struct echoaudio *chip)
+{
+	if (wait_handshake(chip))
+		return -EIO;
+	clear_handshake(chip);
+	return send_vector(chip, DSP_VC_SET_VMIXER_GAIN);
+}
+
diff --git a/sound/pci/echoaudio/indigoiox.c b/sound/pci/echoaudio/indigoiox.c
new file mode 100644
index 000000000..a017c966b
--- /dev/null
+++ b/sound/pci/echoaudio/indigoiox.c
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  ALSA driver for Echoaudio soundcards.
+ *  Copyright (C) 2009 Giuliano Pochini <pochini@shiny.it>
+ */
+
+#define INDIGO_FAMILY
+#define ECHOCARD_INDIGO_IOX
+#define ECHOCARD_NAME "Indigo IOx"
+#define ECHOCARD_HAS_MONITOR
+#define ECHOCARD_HAS_SUPER_INTERLEAVE
+#define ECHOCARD_HAS_VMIXER
+#define ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT	0	/* 8 */
+#define PX_DIGITAL_OUT	8	/* 0 */
+#define PX_ANALOG_IN	8	/* 2 */
+#define PX_DIGITAL_IN	10	/* 0 */
+#define PX_NUM		10
+
+/* Bus indexes */
+#define BX_ANALOG_OUT	0	/* 2 */
+#define BX_DIGITAL_OUT	2	/* 0 */
+#define BX_ANALOG_IN	2	/* 2 */
+#define BX_DIGITAL_IN	4	/* 0 */
+#define BX_NUM		4
+
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/tlv.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <linux/atomic.h>
+#include "echoaudio.h"
+
+MODULE_FIRMWARE("ea/loader_dsp.fw");
+MODULE_FIRMWARE("ea/indigo_iox_dsp.fw");
+
+#define FW_361_LOADER		0
+#define FW_INDIGO_IOX_DSP	1
+
+static const struct firmware card_fw[] = {
+	{0, "loader_dsp.fw"},
+	{0, "indigo_iox_dsp.fw"}
+};
+
+static const struct pci_device_id snd_echo_ids[] = {
+	{0x1057, 0x3410, 0xECC0, 0x00D0, 0, 0, 0},	/* Indigo IOx */
+	{0,}
+};
+
+static const struct snd_pcm_hardware pcm_hardware_skel = {
+	.info = SNDRV_PCM_INFO_MMAP |
+		SNDRV_PCM_INFO_INTERLEAVED |
+		SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_PAUSE |
+		SNDRV_PCM_INFO_SYNC_START,
+	.formats =	SNDRV_PCM_FMTBIT_U8 |
+			SNDRV_PCM_FMTBIT_S16_LE |
+			SNDRV_PCM_FMTBIT_S24_3LE |
+			SNDRV_PCM_FMTBIT_S32_LE |
+			SNDRV_PCM_FMTBIT_S32_BE,
+	.rates = 	SNDRV_PCM_RATE_32000 |
+			SNDRV_PCM_RATE_44100 |
+			SNDRV_PCM_RATE_48000 |
+			SNDRV_PCM_RATE_64000 |
+			SNDRV_PCM_RATE_88200 |
+			SNDRV_PCM_RATE_96000,
+	.rate_min = 32000,
+	.rate_max = 96000,
+	.channels_min = 1,
+	.channels_max = 8,
+	.buffer_bytes_max = 262144,
+	.period_bytes_min = 32,
+	.period_bytes_max = 131072,
+	.periods_min = 2,
+	.periods_max = 220,
+};
+
+#include "indigoiox_dsp.c"
+#include "indigo_express_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio.c"
+
diff --git a/sound/pci/echoaudio/indigoiox_dsp.c b/sound/pci/echoaudio/indigoiox_dsp.c
new file mode 100644
index 000000000..1ae394ea7
--- /dev/null
+++ b/sound/pci/echoaudio/indigoiox_dsp.c
@@ -0,0 +1,70 @@
+/************************************************************************
+
+This file is part of Echo Digital Audio's generic driver library.
+Copyright Echo Digital Audio Corporation (c) 1998 - 2005
+All rights reserved
+www.echoaudio.com
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+*************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+*************************************************************************/
+
+static int update_vmixer_level(struct echoaudio *chip);
+static int set_vmixer_gain(struct echoaudio *chip, u16 output,
+			   u16 pipe, int gain);
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+	int err;
+
+	if (snd_BUG_ON((subdevice_id & 0xfff0) != INDIGO_IOX))
+		return -ENODEV;
+
+	err = init_dsp_comm_page(chip);
+	if (err < 0) {
+		dev_err(chip->card->dev,
+			"init_hw - could not initialize DSP comm page\n");
+		return err;
+	}
+
+	chip->device_id = device_id;
+	chip->subdevice_id = subdevice_id;
+	chip->bad_board = true;
+	chip->dsp_code_to_load = FW_INDIGO_IOX_DSP;
+	/* Since this card has no ASIC, mark it as loaded so everything
+	   works OK */
+	chip->asic_loaded = true;
+	chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL;
+
+	err = load_firmware(chip);
+	if (err < 0)
+		return err;
+	chip->bad_board = false;
+
+	return err;
+}
+
+
+
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+	return init_line_levels(chip);
+}
diff --git a/sound/pci/echoaudio/layla20.c b/sound/pci/echoaudio/layla20.c
new file mode 100644
index 000000000..7e38bc9c0
--- /dev/null
+++ b/sound/pci/echoaudio/layla20.c
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  ALSA driver for Echoaudio soundcards.
+ *  Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ */
+
+#define ECHOGALS_FAMILY
+#define ECHOCARD_LAYLA20
+#define ECHOCARD_NAME "Layla20"
+#define ECHOCARD_HAS_MONITOR
+#define ECHOCARD_HAS_ASIC
+#define ECHOCARD_HAS_INPUT_GAIN
+#define ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_SUPER_INTERLEAVE
+#define ECHOCARD_HAS_DIGITAL_IO
+#define ECHOCARD_HAS_EXTERNAL_CLOCK
+#define ECHOCARD_HAS_ADAT	false
+#define ECHOCARD_HAS_OUTPUT_CLOCK_SWITCH
+#define ECHOCARD_HAS_MIDI
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT	0	/* 10 */
+#define PX_DIGITAL_OUT	10	/*  2 */
+#define PX_ANALOG_IN	12	/*  8 */
+#define PX_DIGITAL_IN	20	/*  2 */
+#define PX_NUM		22
+
+/* Bus indexes */
+#define BX_ANALOG_OUT	0	/* 10 */
+#define BX_DIGITAL_OUT	10	/*  2 */
+#define BX_ANALOG_IN	12	/*  8 */
+#define BX_DIGITAL_IN	20	/*  2 */
+#define BX_NUM		22
+
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/tlv.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <sound/rawmidi.h>
+#include <linux/atomic.h>
+#include "echoaudio.h"
+
+MODULE_FIRMWARE("ea/layla20_dsp.fw");
+MODULE_FIRMWARE("ea/layla20_asic.fw");
+
+#define FW_LAYLA20_DSP	0
+#define FW_LAYLA20_ASIC	1
+
+static const struct firmware card_fw[] = {
+	{0, "layla20_dsp.fw"},
+	{0, "layla20_asic.fw"}
+};
+
+static const struct pci_device_id snd_echo_ids[] = {
+	{0x1057, 0x1801, 0xECC0, 0x0030, 0, 0, 0},	/* DSP 56301 Layla20 rev.0 */
+	{0x1057, 0x1801, 0xECC0, 0x0031, 0, 0, 0},	/* DSP 56301 Layla20 rev.1 */
+	{0,}
+};
+
+static const struct snd_pcm_hardware pcm_hardware_skel = {
+	.info = SNDRV_PCM_INFO_MMAP |
+		SNDRV_PCM_INFO_INTERLEAVED |
+		SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_PAUSE |
+		SNDRV_PCM_INFO_SYNC_START,
+	.formats =	SNDRV_PCM_FMTBIT_U8 |
+			SNDRV_PCM_FMTBIT_S16_LE |
+			SNDRV_PCM_FMTBIT_S24_3LE |
+			SNDRV_PCM_FMTBIT_S32_LE |
+			SNDRV_PCM_FMTBIT_S32_BE,
+	.rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_CONTINUOUS,
+	.rate_min = 8000,
+	.rate_max = 50000,
+	.channels_min = 1,
+	.channels_max = 10,
+	.buffer_bytes_max = 262144,
+	.period_bytes_min = 32,
+	.period_bytes_max = 131072,
+	.periods_min = 2,
+	.periods_max = 220,
+	/* One page (4k) contains 512 instructions. I don't know if the hw
+	supports lists longer than this. In this case periods_max=220 is a
+	safe limit to make sure the list never exceeds 512 instructions. */
+};
+
+#include "layla20_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio.c"
+#include "midi.c"
diff --git a/sound/pci/echoaudio/layla20_dsp.c b/sound/pci/echoaudio/layla20_dsp.c
new file mode 100644
index 000000000..5e5b6e288
--- /dev/null
+++ b/sound/pci/echoaudio/layla20_dsp.c
@@ -0,0 +1,289 @@
+/****************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+   *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int read_dsp(struct echoaudio *chip, u32 *data);
+static int set_professional_spdif(struct echoaudio *chip, char prof);
+static int load_asic_generic(struct echoaudio *chip, u32 cmd, short asic);
+static int check_asic_status(struct echoaudio *chip);
+static int update_flags(struct echoaudio *chip);
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+	int err;
+
+	if (snd_BUG_ON((subdevice_id & 0xfff0) != LAYLA20))
+		return -ENODEV;
+
+	if ((err = init_dsp_comm_page(chip))) {
+		dev_err(chip->card->dev,
+			"init_hw - could not initialize DSP comm page\n");
+		return err;
+	}
+
+	chip->device_id = device_id;
+	chip->subdevice_id = subdevice_id;
+	chip->bad_board = true;
+	chip->has_midi = true;
+	chip->dsp_code_to_load = FW_LAYLA20_DSP;
+	chip->input_clock_types =
+		ECHO_CLOCK_BIT_INTERNAL | ECHO_CLOCK_BIT_SPDIF |
+		ECHO_CLOCK_BIT_WORD | ECHO_CLOCK_BIT_SUPER;
+	chip->output_clock_types =
+		ECHO_CLOCK_BIT_WORD | ECHO_CLOCK_BIT_SUPER;
+
+	if ((err = load_firmware(chip)) < 0)
+		return err;
+	chip->bad_board = false;
+
+	return err;
+}
+
+
+
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+	chip->professional_spdif = false;
+	return init_line_levels(chip);
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+	u32 clocks_from_dsp, clock_bits;
+
+	/* Map the DSP clock detect bits to the generic driver clock detect bits */
+	clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+	clock_bits = ECHO_CLOCK_BIT_INTERNAL;
+
+	if (clocks_from_dsp & GLDM_CLOCK_DETECT_BIT_SPDIF)
+		clock_bits |= ECHO_CLOCK_BIT_SPDIF;
+
+	if (clocks_from_dsp & GLDM_CLOCK_DETECT_BIT_WORD) {
+		if (clocks_from_dsp & GLDM_CLOCK_DETECT_BIT_SUPER)
+			clock_bits |= ECHO_CLOCK_BIT_SUPER;
+		else
+			clock_bits |= ECHO_CLOCK_BIT_WORD;
+	}
+
+	return clock_bits;
+}
+
+
+
+/* ASIC status check - some cards have one or two ASICs that need to be
+loaded.  Once that load is complete, this function is called to see if
+the load was successful.
+If this load fails, it does not necessarily mean that the hardware is
+defective - the external box may be disconnected or turned off.
+This routine sometimes fails for Layla20; for Layla20, the loop runs
+5 times and succeeds if it wins on three of the loops. */
+static int check_asic_status(struct echoaudio *chip)
+{
+	u32 asic_status;
+	int goodcnt, i;
+
+	chip->asic_loaded = false;
+	for (i = goodcnt = 0; i < 5; i++) {
+		send_vector(chip, DSP_VC_TEST_ASIC);
+
+		/* The DSP will return a value to indicate whether or not
+		   the ASIC is currently loaded */
+		if (read_dsp(chip, &asic_status) < 0) {
+			dev_err(chip->card->dev,
+				"check_asic_status: failed on read_dsp\n");
+			return -EIO;
+		}
+
+		if (asic_status == ASIC_ALREADY_LOADED) {
+			if (++goodcnt == 3) {
+				chip->asic_loaded = true;
+				return 0;
+			}
+		}
+	}
+	return -EIO;
+}
+
+
+
+/* Layla20 has an ASIC in the external box */
+static int load_asic(struct echoaudio *chip)
+{
+	int err;
+
+	if (chip->asic_loaded)
+		return 0;
+
+	err = load_asic_generic(chip, DSP_FNC_LOAD_LAYLA_ASIC,
+				FW_LAYLA20_ASIC);
+	if (err < 0)
+		return err;
+
+	/* Check if ASIC is alive and well. */
+	return check_asic_status(chip);
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+	if (snd_BUG_ON(rate < 8000 || rate > 50000))
+		return -EINVAL;
+
+	/* Only set the clock for internal mode. Do not return failure,
+	   simply treat it as a non-event. */
+	if (chip->input_clock != ECHO_CLOCK_INTERNAL) {
+		dev_warn(chip->card->dev,
+			 "Cannot set sample rate - clock not set to CLK_CLOCKININTERNAL\n");
+		chip->comm_page->sample_rate = cpu_to_le32(rate);
+		chip->sample_rate = rate;
+		return 0;
+	}
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	dev_dbg(chip->card->dev, "set_sample_rate(%d)\n", rate);
+	chip->sample_rate = rate;
+	chip->comm_page->sample_rate = cpu_to_le32(rate);
+	clear_handshake(chip);
+	return send_vector(chip, DSP_VC_SET_LAYLA_SAMPLE_RATE);
+}
+
+
+
+static int set_input_clock(struct echoaudio *chip, u16 clock_source)
+{
+	u16 clock;
+	u32 rate;
+
+	rate = 0;
+	switch (clock_source) {
+	case ECHO_CLOCK_INTERNAL:
+		rate = chip->sample_rate;
+		clock = LAYLA20_CLOCK_INTERNAL;
+		break;
+	case ECHO_CLOCK_SPDIF:
+		clock = LAYLA20_CLOCK_SPDIF;
+		break;
+	case ECHO_CLOCK_WORD:
+		clock = LAYLA20_CLOCK_WORD;
+		break;
+	case ECHO_CLOCK_SUPER:
+		clock = LAYLA20_CLOCK_SUPER;
+		break;
+	default:
+		dev_err(chip->card->dev,
+			"Input clock 0x%x not supported for Layla24\n",
+			clock_source);
+		return -EINVAL;
+	}
+	chip->input_clock = clock_source;
+
+	chip->comm_page->input_clock = cpu_to_le16(clock);
+	clear_handshake(chip);
+	send_vector(chip, DSP_VC_UPDATE_CLOCKS);
+
+	if (rate)
+		set_sample_rate(chip, rate);
+
+	return 0;
+}
+
+
+
+static int set_output_clock(struct echoaudio *chip, u16 clock)
+{
+	switch (clock) {
+	case ECHO_CLOCK_SUPER:
+		clock = LAYLA20_OUTPUT_CLOCK_SUPER;
+		break;
+	case ECHO_CLOCK_WORD:
+		clock = LAYLA20_OUTPUT_CLOCK_WORD;
+		break;
+	default:
+		dev_err(chip->card->dev, "set_output_clock wrong clock\n");
+		return -EINVAL;
+	}
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	chip->comm_page->output_clock = cpu_to_le16(clock);
+	chip->output_clock = clock;
+	clear_handshake(chip);
+	return send_vector(chip, DSP_VC_UPDATE_CLOCKS);
+}
+
+
+
+/* Set input bus gain (one unit is 0.5dB !) */
+static int set_input_gain(struct echoaudio *chip, u16 input, int gain)
+{
+	if (snd_BUG_ON(input >= num_busses_in(chip)))
+		return -EINVAL;
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	chip->input_gain[input] = gain;
+	gain += GL20_INPUT_GAIN_MAGIC_NUMBER;
+	chip->comm_page->line_in_level[input] = gain;
+	return 0;
+}
+
+
+
+/* Tell the DSP to reread the flags from the comm page */
+static int update_flags(struct echoaudio *chip)
+{
+	if (wait_handshake(chip))
+		return -EIO;
+	clear_handshake(chip);
+	return send_vector(chip, DSP_VC_UPDATE_FLAGS);
+}
+
+
+
+static int set_professional_spdif(struct echoaudio *chip, char prof)
+{
+	if (prof)
+		chip->comm_page->flags |=
+			cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF);
+	else
+		chip->comm_page->flags &=
+			~cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF);
+	chip->professional_spdif = prof;
+	return update_flags(chip);
+}
diff --git a/sound/pci/echoaudio/layla24.c b/sound/pci/echoaudio/layla24.c
new file mode 100644
index 000000000..95c52210f
--- /dev/null
+++ b/sound/pci/echoaudio/layla24.c
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  ALSA driver for Echoaudio soundcards.
+ *  Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ */
+
+#define ECHO24_FAMILY
+#define ECHOCARD_LAYLA24
+#define ECHOCARD_NAME "Layla24"
+#define ECHOCARD_HAS_MONITOR
+#define ECHOCARD_HAS_ASIC
+#define ECHOCARD_HAS_INPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_SUPER_INTERLEAVE
+#define ECHOCARD_HAS_DIGITAL_IO
+#define ECHOCARD_HAS_DIGITAL_IN_AUTOMUTE
+#define ECHOCARD_HAS_DIGITAL_MODE_SWITCH
+#define ECHOCARD_HAS_EXTERNAL_CLOCK
+#define ECHOCARD_HAS_ADAT	6
+#define ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+#define ECHOCARD_HAS_MIDI
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT	0	/* 8 */
+#define PX_DIGITAL_OUT	8	/* 8 */
+#define PX_ANALOG_IN	16	/* 8 */
+#define PX_DIGITAL_IN	24	/* 8 */
+#define PX_NUM		32
+
+/* Bus indexes */
+#define BX_ANALOG_OUT	0	/* 8 */
+#define BX_DIGITAL_OUT	8	/* 8 */
+#define BX_ANALOG_IN	16	/* 8 */
+#define BX_DIGITAL_IN	24	/* 8 */
+#define BX_NUM		32
+
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/tlv.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <sound/rawmidi.h>
+#include <linux/atomic.h>
+#include "echoaudio.h"
+
+MODULE_FIRMWARE("ea/loader_dsp.fw");
+MODULE_FIRMWARE("ea/layla24_dsp.fw");
+MODULE_FIRMWARE("ea/layla24_1_asic.fw");
+MODULE_FIRMWARE("ea/layla24_2A_asic.fw");
+MODULE_FIRMWARE("ea/layla24_2S_asic.fw");
+
+#define FW_361_LOADER		0
+#define FW_LAYLA24_DSP		1
+#define FW_LAYLA24_1_ASIC	2
+#define FW_LAYLA24_2A_ASIC	3
+#define FW_LAYLA24_2S_ASIC	4
+
+static const struct firmware card_fw[] = {
+	{0, "loader_dsp.fw"},
+	{0, "layla24_dsp.fw"},
+	{0, "layla24_1_asic.fw"},
+	{0, "layla24_2A_asic.fw"},
+	{0, "layla24_2S_asic.fw"}
+};
+
+static const struct pci_device_id snd_echo_ids[] = {
+	{0x1057, 0x3410, 0xECC0, 0x0060, 0, 0, 0},	/* DSP 56361 Layla24 rev.0 */
+	{0,}
+};
+
+static const struct snd_pcm_hardware pcm_hardware_skel = {
+	.info = SNDRV_PCM_INFO_MMAP |
+		SNDRV_PCM_INFO_INTERLEAVED |
+		SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_PAUSE |
+		SNDRV_PCM_INFO_SYNC_START,
+	.formats =	SNDRV_PCM_FMTBIT_U8 |
+			SNDRV_PCM_FMTBIT_S16_LE |
+			SNDRV_PCM_FMTBIT_S24_3LE |
+			SNDRV_PCM_FMTBIT_S32_LE |
+			SNDRV_PCM_FMTBIT_S32_BE,
+	.rates =	SNDRV_PCM_RATE_8000_96000,
+	.rate_min = 8000,
+	.rate_max = 100000,
+	.channels_min = 1,
+	.channels_max = 8,
+	.buffer_bytes_max = 262144,
+	.period_bytes_min = 32,
+	.period_bytes_max = 131072,
+	.periods_min = 2,
+	.periods_max = 220,
+	/* One page (4k) contains 512 instructions. I don't know if the hw
+	supports lists longer than this. In this case periods_max=220 is a
+	safe limit to make sure the list never exceeds 512 instructions. */
+};
+
+
+#include "layla24_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio_gml.c"
+#include "echoaudio.c"
+#include "midi.c"
diff --git a/sound/pci/echoaudio/layla24_dsp.c b/sound/pci/echoaudio/layla24_dsp.c
new file mode 100644
index 000000000..c02bc1dcc
--- /dev/null
+++ b/sound/pci/echoaudio/layla24_dsp.c
@@ -0,0 +1,394 @@
+/****************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+   *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int write_control_reg(struct echoaudio *chip, u32 value, char force);
+static int set_input_clock(struct echoaudio *chip, u16 clock);
+static int set_professional_spdif(struct echoaudio *chip, char prof);
+static int set_digital_mode(struct echoaudio *chip, u8 mode);
+static int load_asic_generic(struct echoaudio *chip, u32 cmd, short asic);
+static int check_asic_status(struct echoaudio *chip);
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+	int err;
+
+	if (snd_BUG_ON((subdevice_id & 0xfff0) != LAYLA24))
+		return -ENODEV;
+
+	if ((err = init_dsp_comm_page(chip))) {
+		dev_err(chip->card->dev,
+			"init_hw - could not initialize DSP comm page\n");
+		return err;
+	}
+
+	chip->device_id = device_id;
+	chip->subdevice_id = subdevice_id;
+	chip->bad_board = true;
+	chip->has_midi = true;
+	chip->dsp_code_to_load = FW_LAYLA24_DSP;
+	chip->input_clock_types =
+		ECHO_CLOCK_BIT_INTERNAL | ECHO_CLOCK_BIT_SPDIF |
+		ECHO_CLOCK_BIT_WORD | ECHO_CLOCK_BIT_ADAT;
+	chip->digital_modes =
+		ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA |
+		ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL |
+		ECHOCAPS_HAS_DIGITAL_MODE_ADAT;
+
+	if ((err = load_firmware(chip)) < 0)
+		return err;
+	chip->bad_board = false;
+
+	if ((err = init_line_levels(chip)) < 0)
+		return err;
+
+	return err;
+}
+
+
+
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+	chip->digital_mode = DIGITAL_MODE_SPDIF_RCA;
+	chip->professional_spdif = false;
+	chip->digital_in_automute = true;
+	return init_line_levels(chip);
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+	u32 clocks_from_dsp, clock_bits;
+
+	/* Map the DSP clock detect bits to the generic driver clock detect bits */
+	clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+	clock_bits = ECHO_CLOCK_BIT_INTERNAL;
+
+	if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF)
+		clock_bits |= ECHO_CLOCK_BIT_SPDIF;
+
+	if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_ADAT)
+		clock_bits |= ECHO_CLOCK_BIT_ADAT;
+
+	if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_WORD)
+		clock_bits |= ECHO_CLOCK_BIT_WORD;
+
+	return clock_bits;
+}
+
+
+
+/* Layla24 has an ASIC on the PCI card and another ASIC in the external box;
+both need to be loaded. */
+static int load_asic(struct echoaudio *chip)
+{
+	int err;
+
+	if (chip->asic_loaded)
+		return 1;
+
+
+	/* Give the DSP a few milliseconds to settle down */
+	mdelay(10);
+
+	/* Load the ASIC for the PCI card */
+	err = load_asic_generic(chip, DSP_FNC_LOAD_LAYLA24_PCI_CARD_ASIC,
+				FW_LAYLA24_1_ASIC);
+	if (err < 0)
+		return err;
+
+	chip->asic_code = FW_LAYLA24_2S_ASIC;
+
+	/* Now give the new ASIC a little time to set up */
+	mdelay(10);
+
+	/* Do the external one */
+	err = load_asic_generic(chip, DSP_FNC_LOAD_LAYLA24_EXTERNAL_ASIC,
+				FW_LAYLA24_2S_ASIC);
+	if (err < 0)
+		return err;
+
+	/* Now give the external ASIC a little time to set up */
+	mdelay(10);
+
+	/* See if it worked */
+	err = check_asic_status(chip);
+
+	/* Set up the control register if the load succeeded -
+	   48 kHz, internal clock, S/PDIF RCA mode */
+	if (!err)
+		err = write_control_reg(chip, GML_CONVERTER_ENABLE | GML_48KHZ,
+					true);
+	
+	return err;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+	u32 control_reg, clock, base_rate;
+
+	if (snd_BUG_ON(rate >= 50000 &&
+		       chip->digital_mode == DIGITAL_MODE_ADAT))
+		return -EINVAL;
+
+	/* Only set the clock for internal mode. */
+	if (chip->input_clock != ECHO_CLOCK_INTERNAL) {
+		dev_warn(chip->card->dev,
+			 "Cannot set sample rate - clock not set to CLK_CLOCKININTERNAL\n");
+		/* Save the rate anyhow */
+		chip->comm_page->sample_rate = cpu_to_le32(rate);
+		chip->sample_rate = rate;
+		return 0;
+	}
+
+	/* Get the control register & clear the appropriate bits */
+	control_reg = le32_to_cpu(chip->comm_page->control_register);
+	control_reg &= GML_CLOCK_CLEAR_MASK & GML_SPDIF_RATE_CLEAR_MASK;
+
+	clock = 0;
+
+	switch (rate) {
+	case 96000:
+		clock = GML_96KHZ;
+		break;
+	case 88200:
+		clock = GML_88KHZ;
+		break;
+	case 48000:
+		clock = GML_48KHZ | GML_SPDIF_SAMPLE_RATE1;
+		break;
+	case 44100:
+		clock = GML_44KHZ;
+		/* Professional mode */
+		if (control_reg & GML_SPDIF_PRO_MODE)
+			clock |= GML_SPDIF_SAMPLE_RATE0;
+		break;
+	case 32000:
+		clock = GML_32KHZ | GML_SPDIF_SAMPLE_RATE0 |
+			GML_SPDIF_SAMPLE_RATE1;
+		break;
+	case 22050:
+		clock = GML_22KHZ;
+		break;
+	case 16000:
+		clock = GML_16KHZ;
+		break;
+	case 11025:
+		clock = GML_11KHZ;
+		break;
+	case 8000:
+		clock = GML_8KHZ;
+		break;
+	default:
+		/* If this is a non-standard rate, then the driver needs to
+		use Layla24's special "continuous frequency" mode */
+		clock = LAYLA24_CONTINUOUS_CLOCK;
+		if (rate > 50000) {
+			base_rate = rate >> 1;
+			control_reg |= GML_DOUBLE_SPEED_MODE;
+		} else {
+			base_rate = rate;
+		}
+
+		if (base_rate < 25000)
+			base_rate = 25000;
+
+		if (wait_handshake(chip))
+			return -EIO;
+
+		chip->comm_page->sample_rate =
+			cpu_to_le32(LAYLA24_MAGIC_NUMBER / base_rate - 2);
+
+		clear_handshake(chip);
+		send_vector(chip, DSP_VC_SET_LAYLA24_FREQUENCY_REG);
+	}
+
+	control_reg |= clock;
+
+	chip->comm_page->sample_rate = cpu_to_le32(rate);	/* ignored by the DSP ? */
+	chip->sample_rate = rate;
+	dev_dbg(chip->card->dev,
+		"set_sample_rate: %d clock %d\n", rate, control_reg);
+
+	return write_control_reg(chip, control_reg, false);
+}
+
+
+
+static int set_input_clock(struct echoaudio *chip, u16 clock)
+{
+	u32 control_reg, clocks_from_dsp;
+
+	/* Mask off the clock select bits */
+	control_reg = le32_to_cpu(chip->comm_page->control_register) &
+		GML_CLOCK_CLEAR_MASK;
+	clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+	/* Pick the new clock */
+	switch (clock) {
+	case ECHO_CLOCK_INTERNAL:
+		chip->input_clock = ECHO_CLOCK_INTERNAL;
+		return set_sample_rate(chip, chip->sample_rate);
+	case ECHO_CLOCK_SPDIF:
+		if (chip->digital_mode == DIGITAL_MODE_ADAT)
+			return -EAGAIN;
+		control_reg |= GML_SPDIF_CLOCK;
+		/* Layla24 doesn't support 96KHz S/PDIF */
+		control_reg &= ~GML_DOUBLE_SPEED_MODE;
+		break;
+	case ECHO_CLOCK_WORD:
+		control_reg |= GML_WORD_CLOCK;
+		if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_WORD96)
+			control_reg |= GML_DOUBLE_SPEED_MODE;
+		else
+			control_reg &= ~GML_DOUBLE_SPEED_MODE;
+		break;
+	case ECHO_CLOCK_ADAT:
+		if (chip->digital_mode != DIGITAL_MODE_ADAT)
+			return -EAGAIN;
+		control_reg |= GML_ADAT_CLOCK;
+		control_reg &= ~GML_DOUBLE_SPEED_MODE;
+		break;
+	default:
+		dev_err(chip->card->dev,
+			"Input clock 0x%x not supported for Layla24\n", clock);
+		return -EINVAL;
+	}
+
+	chip->input_clock = clock;
+	return write_control_reg(chip, control_reg, true);
+}
+
+
+
+/* Depending on what digital mode you want, Layla24 needs different ASICs
+loaded.  This function checks the ASIC needed for the new mode and sees
+if it matches the one already loaded. */
+static int switch_asic(struct echoaudio *chip, short asic)
+{
+	s8 *monitors;
+
+	/*  Check to see if this is already loaded */
+	if (asic != chip->asic_code) {
+		monitors = kmemdup(chip->comm_page->monitors,
+					MONITOR_ARRAY_SIZE, GFP_KERNEL);
+		if (! monitors)
+			return -ENOMEM;
+
+		memset(chip->comm_page->monitors, ECHOGAIN_MUTED,
+		       MONITOR_ARRAY_SIZE);
+
+		/* Load the desired ASIC */
+		if (load_asic_generic(chip, DSP_FNC_LOAD_LAYLA24_EXTERNAL_ASIC,
+				      asic) < 0) {
+			memcpy(chip->comm_page->monitors, monitors,
+			       MONITOR_ARRAY_SIZE);
+			kfree(monitors);
+			return -EIO;
+		}
+		chip->asic_code = asic;
+		memcpy(chip->comm_page->monitors, monitors, MONITOR_ARRAY_SIZE);
+		kfree(monitors);
+	}
+
+	return 0;
+}
+
+
+
+static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode)
+{
+	u32 control_reg;
+	int err, incompatible_clock;
+	short asic;
+
+	/* Set clock to "internal" if it's not compatible with the new mode */
+	incompatible_clock = false;
+	switch (mode) {
+	case DIGITAL_MODE_SPDIF_OPTICAL:
+	case DIGITAL_MODE_SPDIF_RCA:
+		if (chip->input_clock == ECHO_CLOCK_ADAT)
+			incompatible_clock = true;
+		asic = FW_LAYLA24_2S_ASIC;
+		break;
+	case DIGITAL_MODE_ADAT:
+		if (chip->input_clock == ECHO_CLOCK_SPDIF)
+			incompatible_clock = true;
+		asic = FW_LAYLA24_2A_ASIC;
+		break;
+	default:
+		dev_err(chip->card->dev,
+			"Digital mode not supported: %d\n", mode);
+		return -EINVAL;
+	}
+
+	if (incompatible_clock) {	/* Switch to 48KHz, internal */
+		chip->sample_rate = 48000;
+		spin_lock_irq(&chip->lock);
+		set_input_clock(chip, ECHO_CLOCK_INTERNAL);
+		spin_unlock_irq(&chip->lock);
+	}
+
+	/* switch_asic() can sleep */
+	if (switch_asic(chip, asic) < 0)
+		return -EIO;
+
+	spin_lock_irq(&chip->lock);
+
+	/* Tweak the control register */
+	control_reg = le32_to_cpu(chip->comm_page->control_register);
+	control_reg &= GML_DIGITAL_MODE_CLEAR_MASK;
+
+	switch (mode) {
+	case DIGITAL_MODE_SPDIF_OPTICAL:
+		control_reg |= GML_SPDIF_OPTICAL_MODE;
+		break;
+	case DIGITAL_MODE_SPDIF_RCA:
+		/* GML_SPDIF_OPTICAL_MODE bit cleared */
+		break;
+	case DIGITAL_MODE_ADAT:
+		control_reg |= GML_ADAT_MODE;
+		control_reg &= ~GML_DOUBLE_SPEED_MODE;
+		break;
+	}
+
+	err = write_control_reg(chip, control_reg, true);
+	spin_unlock_irq(&chip->lock);
+	if (err < 0)
+		return err;
+	chip->digital_mode = mode;
+
+	dev_dbg(chip->card->dev, "set_digital_mode to %d\n", mode);
+	return incompatible_clock;
+}
diff --git a/sound/pci/echoaudio/mia.c b/sound/pci/echoaudio/mia.c
new file mode 100644
index 000000000..a2d4b0003
--- /dev/null
+++ b/sound/pci/echoaudio/mia.c
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  ALSA driver for Echoaudio soundcards.
+ *  Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ */
+
+#define ECHO24_FAMILY
+#define ECHOCARD_MIA
+#define ECHOCARD_NAME "Mia"
+#define ECHOCARD_HAS_MONITOR
+#define ECHOCARD_HAS_INPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_SUPER_INTERLEAVE
+#define ECHOCARD_HAS_VMIXER
+#define ECHOCARD_HAS_DIGITAL_IO
+#define ECHOCARD_HAS_EXTERNAL_CLOCK
+#define ECHOCARD_HAS_ADAT	false
+#define ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+#define ECHOCARD_HAS_MIDI
+#define ECHOCARD_HAS_LINE_OUT_GAIN
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT	0	/* 8 */
+#define PX_DIGITAL_OUT	8	/* 0 */
+#define PX_ANALOG_IN	8	/* 2 */
+#define PX_DIGITAL_IN	10	/* 2 */
+#define PX_NUM		12
+
+/* Bus indexes */
+#define BX_ANALOG_OUT	0	/* 2 */
+#define BX_DIGITAL_OUT	2	/* 2 */
+#define BX_ANALOG_IN	4	/* 2 */
+#define BX_DIGITAL_IN	6	/* 2 */
+#define BX_NUM		8
+
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/tlv.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <sound/rawmidi.h>
+#include <linux/atomic.h>
+#include "echoaudio.h"
+
+MODULE_FIRMWARE("ea/loader_dsp.fw");
+MODULE_FIRMWARE("ea/mia_dsp.fw");
+
+#define FW_361_LOADER	0
+#define FW_MIA_DSP	1
+
+static const struct firmware card_fw[] = {
+	{0, "loader_dsp.fw"},
+	{0, "mia_dsp.fw"}
+};
+
+static const struct pci_device_id snd_echo_ids[] = {
+	{0x1057, 0x3410, 0xECC0, 0x0080, 0, 0, 0},	/* DSP 56361 Mia rev.0 */
+	{0x1057, 0x3410, 0xECC0, 0x0081, 0, 0, 0},	/* DSP 56361 Mia rev.1 */
+	{0,}
+};
+
+static const struct snd_pcm_hardware pcm_hardware_skel = {
+	.info = SNDRV_PCM_INFO_MMAP |
+		SNDRV_PCM_INFO_INTERLEAVED |
+		SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_PAUSE |
+		SNDRV_PCM_INFO_SYNC_START,
+	.formats =	SNDRV_PCM_FMTBIT_U8 |
+			SNDRV_PCM_FMTBIT_S16_LE |
+			SNDRV_PCM_FMTBIT_S24_3LE |
+			SNDRV_PCM_FMTBIT_S32_LE |
+			SNDRV_PCM_FMTBIT_S32_BE,
+	.rates = 	SNDRV_PCM_RATE_32000 |
+			SNDRV_PCM_RATE_44100 |
+			SNDRV_PCM_RATE_48000 |
+			SNDRV_PCM_RATE_88200 |
+			SNDRV_PCM_RATE_96000,
+	.rate_min = 8000,
+	.rate_max = 96000,
+	.channels_min = 1,
+	.channels_max = 8,
+	.buffer_bytes_max = 262144,
+	.period_bytes_min = 32,
+	.period_bytes_max = 131072,
+	.periods_min = 2,
+	.periods_max = 220,
+	/* One page (4k) contains 512 instructions. I don't know if the hw
+	supports lists longer than this. In this case periods_max=220 is a
+	safe limit to make sure the list never exceeds 512 instructions. */
+};
+
+
+#include "mia_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio.c"
+#include "midi.c"
diff --git a/sound/pci/echoaudio/mia_dsp.c b/sound/pci/echoaudio/mia_dsp.c
new file mode 100644
index 000000000..8f612a09c
--- /dev/null
+++ b/sound/pci/echoaudio/mia_dsp.c
@@ -0,0 +1,225 @@
+/****************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+   *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int set_input_clock(struct echoaudio *chip, u16 clock);
+static int set_professional_spdif(struct echoaudio *chip, char prof);
+static int update_flags(struct echoaudio *chip);
+static int set_vmixer_gain(struct echoaudio *chip, u16 output, u16 pipe,
+			   int gain);
+static int update_vmixer_level(struct echoaudio *chip);
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+	int err;
+
+	if (snd_BUG_ON((subdevice_id & 0xfff0) != MIA))
+		return -ENODEV;
+
+	if ((err = init_dsp_comm_page(chip))) {
+		dev_err(chip->card->dev,
+			"init_hw - could not initialize DSP comm page\n");
+		return err;
+	}
+
+	chip->device_id = device_id;
+	chip->subdevice_id = subdevice_id;
+	chip->bad_board = true;
+	chip->dsp_code_to_load = FW_MIA_DSP;
+	/* Since this card has no ASIC, mark it as loaded so everything
+	   works OK */
+	chip->asic_loaded = true;
+	if ((subdevice_id & 0x0000f) == MIA_MIDI_REV)
+		chip->has_midi = true;
+	chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL |
+		ECHO_CLOCK_BIT_SPDIF;
+
+	if ((err = load_firmware(chip)) < 0)
+		return err;
+	chip->bad_board = false;
+
+	return err;
+}
+
+
+
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+	return init_line_levels(chip);
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+	u32 clocks_from_dsp, clock_bits;
+
+	/* Map the DSP clock detect bits to the generic driver clock
+	   detect bits */
+	clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+	clock_bits = ECHO_CLOCK_BIT_INTERNAL;
+
+	if (clocks_from_dsp & GLDM_CLOCK_DETECT_BIT_SPDIF)
+		clock_bits |= ECHO_CLOCK_BIT_SPDIF;
+
+	return clock_bits;
+}
+
+
+
+/* The Mia has no ASIC. Just do nothing */
+static int load_asic(struct echoaudio *chip)
+{
+	return 0;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+	u32 control_reg;
+
+	switch (rate) {
+	case 96000:
+		control_reg = MIA_96000;
+		break;
+	case 88200:
+		control_reg = MIA_88200;
+		break;
+	case 48000:
+		control_reg = MIA_48000;
+		break;
+	case 44100:
+		control_reg = MIA_44100;
+		break;
+	case 32000:
+		control_reg = MIA_32000;
+		break;
+	default:
+		dev_err(chip->card->dev,
+			"set_sample_rate: %d invalid!\n", rate);
+		return -EINVAL;
+	}
+
+	/* Override the clock setting if this Mia is set to S/PDIF clock */
+	if (chip->input_clock == ECHO_CLOCK_SPDIF)
+		control_reg |= MIA_SPDIF;
+
+	/* Set the control register if it has changed */
+	if (control_reg != le32_to_cpu(chip->comm_page->control_register)) {
+		if (wait_handshake(chip))
+			return -EIO;
+
+		chip->comm_page->sample_rate = cpu_to_le32(rate);	/* ignored by the DSP */
+		chip->comm_page->control_register = cpu_to_le32(control_reg);
+		chip->sample_rate = rate;
+
+		clear_handshake(chip);
+		return send_vector(chip, DSP_VC_UPDATE_CLOCKS);
+	}
+	return 0;
+}
+
+
+
+static int set_input_clock(struct echoaudio *chip, u16 clock)
+{
+	dev_dbg(chip->card->dev, "set_input_clock(%d)\n", clock);
+	if (snd_BUG_ON(clock != ECHO_CLOCK_INTERNAL &&
+		       clock != ECHO_CLOCK_SPDIF))
+		return -EINVAL;
+
+	chip->input_clock = clock;
+	return set_sample_rate(chip, chip->sample_rate);
+}
+
+
+
+/* This function routes the sound from a virtual channel to a real output */
+static int set_vmixer_gain(struct echoaudio *chip, u16 output, u16 pipe,
+			   int gain)
+{
+	int index;
+
+	if (snd_BUG_ON(pipe >= num_pipes_out(chip) ||
+		       output >= num_busses_out(chip)))
+		return -EINVAL;
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	chip->vmixer_gain[output][pipe] = gain;
+	index = output * num_pipes_out(chip) + pipe;
+	chip->comm_page->vmixer[index] = gain;
+
+	dev_dbg(chip->card->dev,
+		"set_vmixer_gain: pipe %d, out %d = %d\n", pipe, output, gain);
+	return 0;
+}
+
+
+
+/* Tell the DSP to read and update virtual mixer levels in comm page. */
+static int update_vmixer_level(struct echoaudio *chip)
+{
+	if (wait_handshake(chip))
+		return -EIO;
+	clear_handshake(chip);
+	return send_vector(chip, DSP_VC_SET_VMIXER_GAIN);
+}
+
+
+
+/* Tell the DSP to reread the flags from the comm page */
+static int update_flags(struct echoaudio *chip)
+{
+	if (wait_handshake(chip))
+		return -EIO;
+	clear_handshake(chip);
+	return send_vector(chip, DSP_VC_UPDATE_FLAGS);
+}
+
+
+
+static int set_professional_spdif(struct echoaudio *chip, char prof)
+{
+	dev_dbg(chip->card->dev, "set_professional_spdif %d\n", prof);
+	if (prof)
+		chip->comm_page->flags |=
+			cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF);
+	else
+		chip->comm_page->flags &=
+			~cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF);
+	chip->professional_spdif = prof;
+	return update_flags(chip);
+}
+
diff --git a/sound/pci/echoaudio/midi.c b/sound/pci/echoaudio/midi.c
new file mode 100644
index 000000000..6045a115c
--- /dev/null
+++ b/sound/pci/echoaudio/midi.c
@@ -0,0 +1,326 @@
+/****************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+   *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+/******************************************************************************
+	MIDI lowlevel code
+******************************************************************************/
+
+/* Start and stop Midi input */
+static int enable_midi_input(struct echoaudio *chip, char enable)
+{
+	dev_dbg(chip->card->dev, "enable_midi_input(%d)\n", enable);
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	if (enable) {
+		chip->mtc_state = MIDI_IN_STATE_NORMAL;
+		chip->comm_page->flags |=
+			cpu_to_le32(DSP_FLAG_MIDI_INPUT);
+	} else
+		chip->comm_page->flags &=
+			~cpu_to_le32(DSP_FLAG_MIDI_INPUT);
+
+	clear_handshake(chip);
+	return send_vector(chip, DSP_VC_UPDATE_FLAGS);
+}
+
+
+
+/* Send a buffer full of MIDI data to the DSP
+Returns how many actually written or < 0 on error */
+static int write_midi(struct echoaudio *chip, u8 *data, int bytes)
+{
+	if (snd_BUG_ON(bytes <= 0 || bytes >= MIDI_OUT_BUFFER_SIZE))
+		return -EINVAL;
+
+	if (wait_handshake(chip))
+		return -EIO;
+
+	/* HF4 indicates that it is safe to write MIDI output data */
+	if (! (get_dsp_register(chip, CHI32_STATUS_REG) & CHI32_STATUS_REG_HF4))
+		return 0;
+
+	chip->comm_page->midi_output[0] = bytes;
+	memcpy(&chip->comm_page->midi_output[1], data, bytes);
+	chip->comm_page->midi_out_free_count = 0;
+	clear_handshake(chip);
+	send_vector(chip, DSP_VC_MIDI_WRITE);
+	dev_dbg(chip->card->dev, "write_midi: %d\n", bytes);
+	return bytes;
+}
+
+
+
+/* Run the state machine for MIDI input data
+MIDI time code sync isn't supported by this code right now, but you still need
+this state machine to parse the incoming MIDI data stream.  Every time the DSP
+sees a 0xF1 byte come in, it adds the DSP sample position to the MIDI data
+stream. The DSP sample position is represented as a 32 bit unsigned value,
+with the high 16 bits first, followed by the low 16 bits. Since these aren't
+real MIDI bytes, the following logic is needed to skip them. */
+static inline int mtc_process_data(struct echoaudio *chip, short midi_byte)
+{
+	switch (chip->mtc_state) {
+	case MIDI_IN_STATE_NORMAL:
+		if (midi_byte == 0xF1)
+			chip->mtc_state = MIDI_IN_STATE_TS_HIGH;
+		break;
+	case MIDI_IN_STATE_TS_HIGH:
+		chip->mtc_state = MIDI_IN_STATE_TS_LOW;
+		return MIDI_IN_SKIP_DATA;
+		break;
+	case MIDI_IN_STATE_TS_LOW:
+		chip->mtc_state = MIDI_IN_STATE_F1_DATA;
+		return MIDI_IN_SKIP_DATA;
+		break;
+	case MIDI_IN_STATE_F1_DATA:
+		chip->mtc_state = MIDI_IN_STATE_NORMAL;
+		break;
+	}
+	return 0;
+}
+
+
+
+/* This function is called from the IRQ handler and it reads the midi data
+from the DSP's buffer.  It returns the number of bytes received. */
+static int midi_service_irq(struct echoaudio *chip)
+{
+	short int count, midi_byte, i, received;
+
+	/* The count is at index 0, followed by actual data */
+	count = le16_to_cpu(chip->comm_page->midi_input[0]);
+
+	if (snd_BUG_ON(count >= MIDI_IN_BUFFER_SIZE))
+		return 0;
+
+	/* Get the MIDI data from the comm page */
+	i = 1;
+	received = 0;
+	for (i = 1; i <= count; i++) {
+		/* Get the MIDI byte */
+		midi_byte = le16_to_cpu(chip->comm_page->midi_input[i]);
+
+		/* Parse the incoming MIDI stream. The incoming MIDI data
+		consists of MIDI bytes and timestamps for the MIDI time code
+		0xF1 bytes. mtc_process_data() is a little state machine that
+		parses the stream. If you get MIDI_IN_SKIP_DATA back, then
+		this is a timestamp byte, not a MIDI byte, so don't store it
+		in the MIDI input buffer. */
+		if (mtc_process_data(chip, midi_byte) == MIDI_IN_SKIP_DATA)
+			continue;
+
+		chip->midi_buffer[received++] = (u8)midi_byte;
+	}
+
+	return received;
+}
+
+
+
+
+/******************************************************************************
+	MIDI interface
+******************************************************************************/
+
+static int snd_echo_midi_input_open(struct snd_rawmidi_substream *substream)
+{
+	struct echoaudio *chip = substream->rmidi->private_data;
+
+	chip->midi_in = substream;
+	return 0;
+}
+
+
+
+static void snd_echo_midi_input_trigger(struct snd_rawmidi_substream *substream,
+					int up)
+{
+	struct echoaudio *chip = substream->rmidi->private_data;
+
+	if (up != chip->midi_input_enabled) {
+		spin_lock_irq(&chip->lock);
+		enable_midi_input(chip, up);
+		spin_unlock_irq(&chip->lock);
+		chip->midi_input_enabled = up;
+	}
+}
+
+
+
+static int snd_echo_midi_input_close(struct snd_rawmidi_substream *substream)
+{
+	struct echoaudio *chip = substream->rmidi->private_data;
+
+	chip->midi_in = NULL;
+	return 0;
+}
+
+
+
+static int snd_echo_midi_output_open(struct snd_rawmidi_substream *substream)
+{
+	struct echoaudio *chip = substream->rmidi->private_data;
+
+	chip->tinuse = 0;
+	chip->midi_full = 0;
+	chip->midi_out = substream;
+	return 0;
+}
+
+
+
+static void snd_echo_midi_output_write(struct timer_list *t)
+{
+	struct echoaudio *chip = from_timer(chip, t, timer);
+	unsigned long flags;
+	int bytes, sent, time;
+	unsigned char buf[MIDI_OUT_BUFFER_SIZE - 1];
+
+	/* No interrupts are involved: we have to check at regular intervals
+	if the card's output buffer has room for new data. */
+	sent = bytes = 0;
+	spin_lock_irqsave(&chip->lock, flags);
+	chip->midi_full = 0;
+	if (!snd_rawmidi_transmit_empty(chip->midi_out)) {
+		bytes = snd_rawmidi_transmit_peek(chip->midi_out, buf,
+						  MIDI_OUT_BUFFER_SIZE - 1);
+		dev_dbg(chip->card->dev, "Try to send %d bytes...\n", bytes);
+		sent = write_midi(chip, buf, bytes);
+		if (sent < 0) {
+			dev_err(chip->card->dev,
+				"write_midi() error %d\n", sent);
+			/* retry later */
+			sent = 9000;
+			chip->midi_full = 1;
+		} else if (sent > 0) {
+			dev_dbg(chip->card->dev, "%d bytes sent\n", sent);
+			snd_rawmidi_transmit_ack(chip->midi_out, sent);
+		} else {
+			/* Buffer is full. DSP's internal buffer is 64 (128 ?)
+			bytes long. Let's wait until half of them are sent */
+			dev_dbg(chip->card->dev, "Full\n");
+			sent = 32;
+			chip->midi_full = 1;
+		}
+	}
+
+	/* We restart the timer only if there is some data left to send */
+	if (!snd_rawmidi_transmit_empty(chip->midi_out) && chip->tinuse) {
+		/* The timer will expire slightly after the data has been
+		   sent */
+		time = (sent << 3) / 25 + 1;	/* 8/25=0.32ms to send a byte */
+		mod_timer(&chip->timer, jiffies + (time * HZ + 999) / 1000);
+		dev_dbg(chip->card->dev,
+			"Timer armed(%d)\n", ((time * HZ + 999) / 1000));
+	}
+	spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+
+
+static void snd_echo_midi_output_trigger(struct snd_rawmidi_substream *substream,
+					 int up)
+{
+	struct echoaudio *chip = substream->rmidi->private_data;
+
+	dev_dbg(chip->card->dev, "snd_echo_midi_output_trigger(%d)\n", up);
+	spin_lock_irq(&chip->lock);
+	if (up) {
+		if (!chip->tinuse) {
+			timer_setup(&chip->timer, snd_echo_midi_output_write,
+				    0);
+			chip->tinuse = 1;
+		}
+	} else {
+		if (chip->tinuse) {
+			chip->tinuse = 0;
+			spin_unlock_irq(&chip->lock);
+			del_timer_sync(&chip->timer);
+			dev_dbg(chip->card->dev, "Timer removed\n");
+			return;
+		}
+	}
+	spin_unlock_irq(&chip->lock);
+
+	if (up && !chip->midi_full)
+		snd_echo_midi_output_write(&chip->timer);
+}
+
+
+
+static int snd_echo_midi_output_close(struct snd_rawmidi_substream *substream)
+{
+	struct echoaudio *chip = substream->rmidi->private_data;
+
+	chip->midi_out = NULL;
+	return 0;
+}
+
+
+
+static const struct snd_rawmidi_ops snd_echo_midi_input = {
+	.open = snd_echo_midi_input_open,
+	.close = snd_echo_midi_input_close,
+	.trigger = snd_echo_midi_input_trigger,
+};
+
+static const struct snd_rawmidi_ops snd_echo_midi_output = {
+	.open = snd_echo_midi_output_open,
+	.close = snd_echo_midi_output_close,
+	.trigger = snd_echo_midi_output_trigger,
+};
+
+
+
+/* <--snd_echo_probe() */
+static int snd_echo_midi_create(struct snd_card *card,
+				struct echoaudio *chip)
+{
+	int err;
+
+	if ((err = snd_rawmidi_new(card, card->shortname, 0, 1, 1,
+				   &chip->rmidi)) < 0)
+		return err;
+
+	strcpy(chip->rmidi->name, card->shortname);
+	chip->rmidi->private_data = chip;
+
+	snd_rawmidi_set_ops(chip->rmidi, SNDRV_RAWMIDI_STREAM_INPUT,
+			    &snd_echo_midi_input);
+	snd_rawmidi_set_ops(chip->rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT,
+			    &snd_echo_midi_output);
+
+	chip->rmidi->info_flags |= SNDRV_RAWMIDI_INFO_OUTPUT |
+		SNDRV_RAWMIDI_INFO_INPUT | SNDRV_RAWMIDI_INFO_DUPLEX;
+	return 0;
+}
diff --git a/sound/pci/echoaudio/mona.c b/sound/pci/echoaudio/mona.c
new file mode 100644
index 000000000..1b45a2b50
--- /dev/null
+++ b/sound/pci/echoaudio/mona.c
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  ALSA driver for Echoaudio soundcards.
+ *  Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ */
+
+#define ECHO24_FAMILY
+#define ECHOCARD_MONA
+#define ECHOCARD_NAME "Mona"
+#define ECHOCARD_HAS_MONITOR
+#define ECHOCARD_HAS_ASIC
+#define ECHOCARD_HAS_SUPER_INTERLEAVE
+#define ECHOCARD_HAS_DIGITAL_IO
+#define ECHOCARD_HAS_DIGITAL_IN_AUTOMUTE
+#define ECHOCARD_HAS_DIGITAL_MODE_SWITCH
+#define ECHOCARD_HAS_EXTERNAL_CLOCK
+#define ECHOCARD_HAS_ADAT	6
+#define ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT	0	/* 6 */
+#define PX_DIGITAL_OUT	6	/* 8 */
+#define PX_ANALOG_IN	14	/* 4 */
+#define PX_DIGITAL_IN	18	/* 8 */
+#define PX_NUM		26
+
+/* Bus indexes */
+#define BX_ANALOG_OUT	0	/* 6 */
+#define BX_DIGITAL_OUT	6	/* 8 */
+#define BX_ANALOG_IN	14	/* 4 */
+#define BX_DIGITAL_IN	18	/* 8 */
+#define BX_NUM		26
+
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/tlv.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <linux/atomic.h>
+#include "echoaudio.h"
+
+MODULE_FIRMWARE("ea/loader_dsp.fw");
+MODULE_FIRMWARE("ea/mona_301_dsp.fw");
+MODULE_FIRMWARE("ea/mona_361_dsp.fw");
+MODULE_FIRMWARE("ea/mona_301_1_asic_48.fw");
+MODULE_FIRMWARE("ea/mona_301_1_asic_96.fw");
+MODULE_FIRMWARE("ea/mona_361_1_asic_48.fw");
+MODULE_FIRMWARE("ea/mona_361_1_asic_96.fw");
+MODULE_FIRMWARE("ea/mona_2_asic.fw");
+
+#define FW_361_LOADER		0
+#define FW_MONA_301_DSP		1
+#define FW_MONA_361_DSP		2
+#define FW_MONA_301_1_ASIC48	3
+#define FW_MONA_301_1_ASIC96	4
+#define FW_MONA_361_1_ASIC48	5
+#define FW_MONA_361_1_ASIC96	6
+#define FW_MONA_2_ASIC		7
+
+static const struct firmware card_fw[] = {
+	{0, "loader_dsp.fw"},
+	{0, "mona_301_dsp.fw"},
+	{0, "mona_361_dsp.fw"},
+	{0, "mona_301_1_asic_48.fw"},
+	{0, "mona_301_1_asic_96.fw"},
+	{0, "mona_361_1_asic_48.fw"},
+	{0, "mona_361_1_asic_96.fw"},
+	{0, "mona_2_asic.fw"}
+};
+
+static const struct pci_device_id snd_echo_ids[] = {
+	{0x1057, 0x1801, 0xECC0, 0x0070, 0, 0, 0},	/* DSP 56301 Mona rev.0 */
+	{0x1057, 0x1801, 0xECC0, 0x0071, 0, 0, 0},	/* DSP 56301 Mona rev.1 */
+	{0x1057, 0x1801, 0xECC0, 0x0072, 0, 0, 0},	/* DSP 56301 Mona rev.2 */
+	{0x1057, 0x3410, 0xECC0, 0x0070, 0, 0, 0},	/* DSP 56361 Mona rev.0 */
+	{0x1057, 0x3410, 0xECC0, 0x0071, 0, 0, 0},	/* DSP 56361 Mona rev.1 */
+	{0x1057, 0x3410, 0xECC0, 0x0072, 0, 0, 0},	/* DSP 56361 Mona rev.2 */
+	{0,}
+};
+
+static const struct snd_pcm_hardware pcm_hardware_skel = {
+	.info = SNDRV_PCM_INFO_MMAP |
+		SNDRV_PCM_INFO_INTERLEAVED |
+		SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_PAUSE |
+		SNDRV_PCM_INFO_SYNC_START,
+	.formats =	SNDRV_PCM_FMTBIT_U8 |
+			SNDRV_PCM_FMTBIT_S16_LE |
+			SNDRV_PCM_FMTBIT_S24_3LE |
+			SNDRV_PCM_FMTBIT_S32_LE |
+			SNDRV_PCM_FMTBIT_S32_BE,
+	.rates = 	SNDRV_PCM_RATE_8000_48000 |
+			SNDRV_PCM_RATE_88200 |
+			SNDRV_PCM_RATE_96000,
+	.rate_min = 8000,
+	.rate_max = 96000,
+	.channels_min = 1,
+	.channels_max = 8,
+	.buffer_bytes_max = 262144,
+	.period_bytes_min = 32,
+	.period_bytes_max = 131072,
+	.periods_min = 2,
+	.periods_max = 220,
+	/* One page (4k) contains 512 instructions. I don't know if the hw
+	supports lists longer than this. In this case periods_max=220 is a
+	safe limit to make sure the list never exceeds 512 instructions. */
+};
+
+
+#include "mona_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio_gml.c"
+#include "echoaudio.c"
diff --git a/sound/pci/echoaudio/mona_dsp.c b/sound/pci/echoaudio/mona_dsp.c
new file mode 100644
index 000000000..f77db83dd
--- /dev/null
+++ b/sound/pci/echoaudio/mona_dsp.c
@@ -0,0 +1,421 @@
+/****************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+   *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int write_control_reg(struct echoaudio *chip, u32 value, char force);
+static int set_input_clock(struct echoaudio *chip, u16 clock);
+static int set_professional_spdif(struct echoaudio *chip, char prof);
+static int set_digital_mode(struct echoaudio *chip, u8 mode);
+static int load_asic_generic(struct echoaudio *chip, u32 cmd, short asic);
+static int check_asic_status(struct echoaudio *chip);
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+	int err;
+
+	if (snd_BUG_ON((subdevice_id & 0xfff0) != MONA))
+		return -ENODEV;
+
+	if ((err = init_dsp_comm_page(chip))) {
+		dev_err(chip->card->dev,
+			"init_hw - could not initialize DSP comm page\n");
+		return err;
+	}
+
+	chip->device_id = device_id;
+	chip->subdevice_id = subdevice_id;
+	chip->bad_board = true;
+	chip->input_clock_types =
+		ECHO_CLOCK_BIT_INTERNAL | ECHO_CLOCK_BIT_SPDIF |
+		ECHO_CLOCK_BIT_WORD | ECHO_CLOCK_BIT_ADAT;
+	chip->digital_modes =
+		ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA |
+		ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL |
+		ECHOCAPS_HAS_DIGITAL_MODE_ADAT;
+
+	/* Mona comes in both '301 and '361 flavors */
+	if (chip->device_id == DEVICE_ID_56361)
+		chip->dsp_code_to_load = FW_MONA_361_DSP;
+	else
+		chip->dsp_code_to_load = FW_MONA_301_DSP;
+
+	if ((err = load_firmware(chip)) < 0)
+		return err;
+	chip->bad_board = false;
+
+	return err;
+}
+
+
+
+static int set_mixer_defaults(struct echoaudio *chip)
+{
+	chip->digital_mode = DIGITAL_MODE_SPDIF_RCA;
+	chip->professional_spdif = false;
+	chip->digital_in_automute = true;
+	return init_line_levels(chip);
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+	u32 clocks_from_dsp, clock_bits;
+
+	/* Map the DSP clock detect bits to the generic driver clock
+	   detect bits */
+	clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+	clock_bits = ECHO_CLOCK_BIT_INTERNAL;
+
+	if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF)
+		clock_bits |= ECHO_CLOCK_BIT_SPDIF;
+
+	if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_ADAT)
+		clock_bits |= ECHO_CLOCK_BIT_ADAT;
+
+	if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_WORD)
+		clock_bits |= ECHO_CLOCK_BIT_WORD;
+
+	return clock_bits;
+}
+
+
+
+/* Mona has an ASIC on the PCI card and another ASIC in the external box; 
+both need to be loaded. */
+static int load_asic(struct echoaudio *chip)
+{
+	u32 control_reg;
+	int err;
+	short asic;
+
+	if (chip->asic_loaded)
+		return 0;
+
+	mdelay(10);
+
+	if (chip->device_id == DEVICE_ID_56361)
+		asic = FW_MONA_361_1_ASIC48;
+	else
+		asic = FW_MONA_301_1_ASIC48;
+
+	err = load_asic_generic(chip, DSP_FNC_LOAD_MONA_PCI_CARD_ASIC, asic);
+	if (err < 0)
+		return err;
+
+	chip->asic_code = asic;
+	mdelay(10);
+
+	/* Do the external one */
+	err = load_asic_generic(chip, DSP_FNC_LOAD_MONA_EXTERNAL_ASIC,
+				FW_MONA_2_ASIC);
+	if (err < 0)
+		return err;
+
+	mdelay(10);
+	err = check_asic_status(chip);
+
+	/* Set up the control register if the load succeeded -
+	   48 kHz, internal clock, S/PDIF RCA mode */
+	if (!err) {
+		control_reg = GML_CONVERTER_ENABLE | GML_48KHZ;
+		err = write_control_reg(chip, control_reg, true);
+	}
+
+	return err;
+}
+
+
+
+/* Depending on what digital mode you want, Mona needs different ASICs
+loaded.  This function checks the ASIC needed for the new mode and sees
+if it matches the one already loaded. */
+static int switch_asic(struct echoaudio *chip, char double_speed)
+{
+	int err;
+	short asic;
+
+	/* Check the clock detect bits to see if this is
+	a single-speed clock or a double-speed clock; load
+	a new ASIC if necessary. */
+	if (chip->device_id == DEVICE_ID_56361) {
+		if (double_speed)
+			asic = FW_MONA_361_1_ASIC96;
+		else
+			asic = FW_MONA_361_1_ASIC48;
+	} else {
+		if (double_speed)
+			asic = FW_MONA_301_1_ASIC96;
+		else
+			asic = FW_MONA_301_1_ASIC48;
+	}
+
+	if (asic != chip->asic_code) {
+		/* Load the desired ASIC */
+		err = load_asic_generic(chip, DSP_FNC_LOAD_MONA_PCI_CARD_ASIC,
+					asic);
+		if (err < 0)
+			return err;
+		chip->asic_code = asic;
+	}
+
+	return 0;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+	u32 control_reg, clock;
+	short asic;
+	char force_write;
+
+	/* Only set the clock for internal mode. */
+	if (chip->input_clock != ECHO_CLOCK_INTERNAL) {
+		dev_dbg(chip->card->dev,
+			"Cannot set sample rate - clock not set to CLK_CLOCKININTERNAL\n");
+		/* Save the rate anyhow */
+		chip->comm_page->sample_rate = cpu_to_le32(rate);
+		chip->sample_rate = rate;
+		return 0;
+	}
+
+	/* Now, check to see if the required ASIC is loaded */
+	if (rate >= 88200) {
+		if (chip->digital_mode == DIGITAL_MODE_ADAT)
+			return -EINVAL;
+		if (chip->device_id == DEVICE_ID_56361)
+			asic = FW_MONA_361_1_ASIC96;
+		else
+			asic = FW_MONA_301_1_ASIC96;
+	} else {
+		if (chip->device_id == DEVICE_ID_56361)
+			asic = FW_MONA_361_1_ASIC48;
+		else
+			asic = FW_MONA_301_1_ASIC48;
+	}
+
+	force_write = 0;
+	if (asic != chip->asic_code) {
+		int err;
+		/* Load the desired ASIC (load_asic_generic() can sleep) */
+		spin_unlock_irq(&chip->lock);
+		err = load_asic_generic(chip, DSP_FNC_LOAD_MONA_PCI_CARD_ASIC,
+					asic);
+		spin_lock_irq(&chip->lock);
+
+		if (err < 0)
+			return err;
+		chip->asic_code = asic;
+		force_write = 1;
+	}
+
+	/* Compute the new control register value */
+	clock = 0;
+	control_reg = le32_to_cpu(chip->comm_page->control_register);
+	control_reg &= GML_CLOCK_CLEAR_MASK;
+	control_reg &= GML_SPDIF_RATE_CLEAR_MASK;
+
+	switch (rate) {
+	case 96000:
+		clock = GML_96KHZ;
+		break;
+	case 88200:
+		clock = GML_88KHZ;
+		break;
+	case 48000:
+		clock = GML_48KHZ | GML_SPDIF_SAMPLE_RATE1;
+		break;
+	case 44100:
+		clock = GML_44KHZ;
+		/* Professional mode */
+		if (control_reg & GML_SPDIF_PRO_MODE)
+			clock |= GML_SPDIF_SAMPLE_RATE0;
+		break;
+	case 32000:
+		clock = GML_32KHZ | GML_SPDIF_SAMPLE_RATE0 |
+			GML_SPDIF_SAMPLE_RATE1;
+		break;
+	case 22050:
+		clock = GML_22KHZ;
+		break;
+	case 16000:
+		clock = GML_16KHZ;
+		break;
+	case 11025:
+		clock = GML_11KHZ;
+		break;
+	case 8000:
+		clock = GML_8KHZ;
+		break;
+	default:
+		dev_err(chip->card->dev,
+			"set_sample_rate: %d invalid!\n", rate);
+		return -EINVAL;
+	}
+
+	control_reg |= clock;
+
+	chip->comm_page->sample_rate = cpu_to_le32(rate);	/* ignored by the DSP */
+	chip->sample_rate = rate;
+	dev_dbg(chip->card->dev,
+		"set_sample_rate: %d clock %d\n", rate, clock);
+
+	return write_control_reg(chip, control_reg, force_write);
+}
+
+
+
+static int set_input_clock(struct echoaudio *chip, u16 clock)
+{
+	u32 control_reg, clocks_from_dsp;
+	int err;
+
+	/* Mask off the clock select bits */
+	control_reg = le32_to_cpu(chip->comm_page->control_register) &
+		GML_CLOCK_CLEAR_MASK;
+	clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+	switch (clock) {
+	case ECHO_CLOCK_INTERNAL:
+		chip->input_clock = ECHO_CLOCK_INTERNAL;
+		return set_sample_rate(chip, chip->sample_rate);
+	case ECHO_CLOCK_SPDIF:
+		if (chip->digital_mode == DIGITAL_MODE_ADAT)
+			return -EAGAIN;
+		spin_unlock_irq(&chip->lock);
+		err = switch_asic(chip, clocks_from_dsp &
+				  GML_CLOCK_DETECT_BIT_SPDIF96);
+		spin_lock_irq(&chip->lock);
+		if (err < 0)
+			return err;
+		control_reg |= GML_SPDIF_CLOCK;
+		if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF96)
+			control_reg |= GML_DOUBLE_SPEED_MODE;
+		else
+			control_reg &= ~GML_DOUBLE_SPEED_MODE;
+		break;
+	case ECHO_CLOCK_WORD:
+		spin_unlock_irq(&chip->lock);
+		err = switch_asic(chip, clocks_from_dsp &
+				  GML_CLOCK_DETECT_BIT_WORD96);
+		spin_lock_irq(&chip->lock);
+		if (err < 0)
+			return err;
+		control_reg |= GML_WORD_CLOCK;
+		if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_WORD96)
+			control_reg |= GML_DOUBLE_SPEED_MODE;
+		else
+			control_reg &= ~GML_DOUBLE_SPEED_MODE;
+		break;
+	case ECHO_CLOCK_ADAT:
+		dev_dbg(chip->card->dev, "Set Mona clock to ADAT\n");
+		if (chip->digital_mode != DIGITAL_MODE_ADAT)
+			return -EAGAIN;
+		control_reg |= GML_ADAT_CLOCK;
+		control_reg &= ~GML_DOUBLE_SPEED_MODE;
+		break;
+	default:
+		dev_err(chip->card->dev,
+			"Input clock 0x%x not supported for Mona\n", clock);
+		return -EINVAL;
+	}
+
+	chip->input_clock = clock;
+	return write_control_reg(chip, control_reg, true);
+}
+
+
+
+static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode)
+{
+	u32 control_reg;
+	int err, incompatible_clock;
+
+	/* Set clock to "internal" if it's not compatible with the new mode */
+	incompatible_clock = false;
+	switch (mode) {
+	case DIGITAL_MODE_SPDIF_OPTICAL:
+	case DIGITAL_MODE_SPDIF_RCA:
+		if (chip->input_clock == ECHO_CLOCK_ADAT)
+			incompatible_clock = true;
+		break;
+	case DIGITAL_MODE_ADAT:
+		if (chip->input_clock == ECHO_CLOCK_SPDIF)
+			incompatible_clock = true;
+		break;
+	default:
+		dev_err(chip->card->dev,
+			"Digital mode not supported: %d\n", mode);
+		return -EINVAL;
+	}
+
+	spin_lock_irq(&chip->lock);
+
+	if (incompatible_clock) {	/* Switch to 48KHz, internal */
+		chip->sample_rate = 48000;
+		set_input_clock(chip, ECHO_CLOCK_INTERNAL);
+	}
+
+	/* Clear the current digital mode */
+	control_reg = le32_to_cpu(chip->comm_page->control_register);
+	control_reg &= GML_DIGITAL_MODE_CLEAR_MASK;
+
+	/* Tweak the control reg */
+	switch (mode) {
+	case DIGITAL_MODE_SPDIF_OPTICAL:
+		control_reg |= GML_SPDIF_OPTICAL_MODE;
+		break;
+	case DIGITAL_MODE_SPDIF_RCA:
+		/* GML_SPDIF_OPTICAL_MODE bit cleared */
+		break;
+	case DIGITAL_MODE_ADAT:
+		/* If the current ASIC is the 96KHz ASIC, switch the ASIC
+		   and set to 48 KHz */
+		if (chip->asic_code == FW_MONA_361_1_ASIC96 ||
+		    chip->asic_code == FW_MONA_301_1_ASIC96) {
+			set_sample_rate(chip, 48000);
+		}
+		control_reg |= GML_ADAT_MODE;
+		control_reg &= ~GML_DOUBLE_SPEED_MODE;
+		break;
+	}
+
+	err = write_control_reg(chip, control_reg, false);
+	spin_unlock_irq(&chip->lock);
+	if (err < 0)
+		return err;
+	chip->digital_mode = mode;
+
+	dev_dbg(chip->card->dev, "set_digital_mode to %d\n", mode);
+	return incompatible_clock;
+}