Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1005 insertions, 0 deletions

diff --git a/sound/soc/codecs/tas5086.c b/sound/soc/codecs/tas5086.c
new file mode 100644
index 000000000..7831c96d0
--- /dev/null
+++ b/sound/soc/codecs/tas5086.c
@@ -0,0 +1,1005 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * TAS5086 ASoC codec driver
+ *
+ * Copyright (c) 2013 Daniel Mack <zonque@gmail.com>
+ *
+ * TODO:
+ *  - implement DAPM and input muxing
+ *  - implement modulation limit
+ *  - implement non-default PWM start
+ *
+ * Note that this chip has a very unusual register layout, specifically
+ * because the registers are of unequal size, and multi-byte registers
+ * require bulk writes to take effect. Regmap does not support that kind
+ * of devices.
+ *
+ * Currently, the driver does not touch any of the registers >= 0x20, so
+ * it doesn't matter because the entire map can be accessed as 8-bit
+ * array. In case more features will be added in the future
+ * that require access to higher registers, the entire regmap H/W I/O
+ * routines have to be open-coded.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+#include <sound/tas5086.h>
+
+#define TAS5086_PCM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE  |		\
+			     SNDRV_PCM_FMTBIT_S20_3LE |		\
+			     SNDRV_PCM_FMTBIT_S24_3LE)
+
+#define TAS5086_PCM_RATES   (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100  | \
+			     SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200  | \
+			     SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | \
+			     SNDRV_PCM_RATE_192000)
+
+/*
+ * TAS5086 registers
+ */
+#define TAS5086_CLOCK_CONTROL		0x00	/* Clock control register  */
+#define TAS5086_CLOCK_RATE(val)		(val << 5)
+#define TAS5086_CLOCK_RATE_MASK		(0x7 << 5)
+#define TAS5086_CLOCK_RATIO(val)	(val << 2)
+#define TAS5086_CLOCK_RATIO_MASK	(0x7 << 2)
+#define TAS5086_CLOCK_SCLK_RATIO_48	(1 << 1)
+#define TAS5086_CLOCK_VALID		(1 << 0)
+
+#define TAS5086_DEEMPH_MASK		0x03
+#define TAS5086_SOFT_MUTE_ALL		0x3f
+
+#define TAS5086_DEV_ID			0x01	/* Device ID register */
+#define TAS5086_ERROR_STATUS		0x02	/* Error status register */
+#define TAS5086_SYS_CONTROL_1		0x03	/* System control register 1 */
+#define TAS5086_SERIAL_DATA_IF		0x04	/* Serial data interface register  */
+#define TAS5086_SYS_CONTROL_2		0x05	/* System control register 2 */
+#define TAS5086_SOFT_MUTE		0x06	/* Soft mute register */
+#define TAS5086_MASTER_VOL		0x07	/* Master volume  */
+#define TAS5086_CHANNEL_VOL(X)		(0x08 + (X))	/* Channel 1-6 volume */
+#define TAS5086_VOLUME_CONTROL		0x09	/* Volume control register */
+#define TAS5086_MOD_LIMIT		0x10	/* Modulation limit register */
+#define TAS5086_PWM_START		0x18	/* PWM start register */
+#define TAS5086_SURROUND		0x19	/* Surround register */
+#define TAS5086_SPLIT_CAP_CHARGE	0x1a	/* Split cap charge period register */
+#define TAS5086_OSC_TRIM		0x1b	/* Oscillator trim register */
+#define TAS5086_BKNDERR 		0x1c
+#define TAS5086_INPUT_MUX		0x20
+#define TAS5086_PWM_OUTPUT_MUX		0x25
+
+#define TAS5086_MAX_REGISTER		TAS5086_PWM_OUTPUT_MUX
+
+#define TAS5086_PWM_START_MIDZ_FOR_START_1	(1 << 7)
+#define TAS5086_PWM_START_MIDZ_FOR_START_2	(1 << 6)
+#define TAS5086_PWM_START_CHANNEL_MASK		(0x3f)
+
+/*
+ * Default TAS5086 power-up configuration
+ */
+static const struct reg_default tas5086_reg_defaults[] = {
+	{ 0x00,	0x6c },
+	{ 0x01,	0x03 },
+	{ 0x02,	0x00 },
+	{ 0x03,	0xa0 },
+	{ 0x04,	0x05 },
+	{ 0x05,	0x60 },
+	{ 0x06,	0x00 },
+	{ 0x07,	0xff },
+	{ 0x08,	0x30 },
+	{ 0x09,	0x30 },
+	{ 0x0a,	0x30 },
+	{ 0x0b,	0x30 },
+	{ 0x0c,	0x30 },
+	{ 0x0d,	0x30 },
+	{ 0x0e,	0xb1 },
+	{ 0x0f,	0x00 },
+	{ 0x10,	0x02 },
+	{ 0x11,	0x00 },
+	{ 0x12,	0x00 },
+	{ 0x13,	0x00 },
+	{ 0x14,	0x00 },
+	{ 0x15,	0x00 },
+	{ 0x16,	0x00 },
+	{ 0x17,	0x00 },
+	{ 0x18,	0x3f },
+	{ 0x19,	0x00 },
+	{ 0x1a,	0x18 },
+	{ 0x1b,	0x82 },
+	{ 0x1c,	0x05 },
+};
+
+static int tas5086_register_size(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case TAS5086_CLOCK_CONTROL ... TAS5086_BKNDERR:
+		return 1;
+	case TAS5086_INPUT_MUX:
+	case TAS5086_PWM_OUTPUT_MUX:
+		return 4;
+	}
+
+	dev_err(dev, "Unsupported register address: %d\n", reg);
+	return 0;
+}
+
+static bool tas5086_accessible_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case 0x0f:
+	case 0x11 ... 0x17:
+	case 0x1d ... 0x1f:
+		return false;
+	default:
+		return true;
+	}
+}
+
+static bool tas5086_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case TAS5086_DEV_ID:
+	case TAS5086_ERROR_STATUS:
+		return true;
+	}
+
+	return false;
+}
+
+static bool tas5086_writeable_reg(struct device *dev, unsigned int reg)
+{
+	return tas5086_accessible_reg(dev, reg) && (reg != TAS5086_DEV_ID);
+}
+
+static int tas5086_reg_write(void *context, unsigned int reg,
+			      unsigned int value)
+{
+	struct i2c_client *client = context;
+	unsigned int i, size;
+	uint8_t buf[5];
+	int ret;
+
+	size = tas5086_register_size(&client->dev, reg);
+	if (size == 0)
+		return -EINVAL;
+
+	buf[0] = reg;
+
+	for (i = size; i >= 1; --i) {
+		buf[i] = value;
+		value >>= 8;
+	}
+
+	ret = i2c_master_send(client, buf, size + 1);
+	if (ret == size + 1)
+		return 0;
+	else if (ret < 0)
+		return ret;
+	else
+		return -EIO;
+}
+
+static int tas5086_reg_read(void *context, unsigned int reg,
+			     unsigned int *value)
+{
+	struct i2c_client *client = context;
+	uint8_t send_buf, recv_buf[4];
+	struct i2c_msg msgs[2];
+	unsigned int size;
+	unsigned int i;
+	int ret;
+
+	size = tas5086_register_size(&client->dev, reg);
+	if (size == 0)
+		return -EINVAL;
+
+	send_buf = reg;
+
+	msgs[0].addr = client->addr;
+	msgs[0].len = sizeof(send_buf);
+	msgs[0].buf = &send_buf;
+	msgs[0].flags = 0;
+
+	msgs[1].addr = client->addr;
+	msgs[1].len = size;
+	msgs[1].buf = recv_buf;
+	msgs[1].flags = I2C_M_RD;
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (ret < 0)
+		return ret;
+	else if (ret != ARRAY_SIZE(msgs))
+		return -EIO;
+
+	*value = 0;
+
+	for (i = 0; i < size; i++) {
+		*value <<= 8;
+		*value |= recv_buf[i];
+	}
+
+	return 0;
+}
+
+static const char * const supply_names[] = {
+	"dvdd", "avdd"
+};
+
+struct tas5086_private {
+	struct regmap	*regmap;
+	unsigned int	mclk, sclk;
+	unsigned int	format;
+	bool		deemph;
+	unsigned int	charge_period;
+	unsigned int	pwm_start_mid_z;
+	/* Current sample rate for de-emphasis control */
+	int		rate;
+	/* GPIO driving Reset pin, if any */
+	int		gpio_nreset;
+	struct		regulator_bulk_data supplies[ARRAY_SIZE(supply_names)];
+};
+
+static int tas5086_deemph[] = { 0, 32000, 44100, 48000 };
+
+static int tas5086_set_deemph(struct snd_soc_component *component)
+{
+	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
+	int i, val = 0;
+
+	if (priv->deemph) {
+		for (i = 0; i < ARRAY_SIZE(tas5086_deemph); i++) {
+			if (tas5086_deemph[i] == priv->rate) {
+				val = i;
+				break;
+			}
+		}
+	}
+
+	return regmap_update_bits(priv->regmap, TAS5086_SYS_CONTROL_1,
+				  TAS5086_DEEMPH_MASK, val);
+}
+
+static int tas5086_get_deemph(struct snd_kcontrol *kcontrol,
+			      struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
+
+	ucontrol->value.integer.value[0] = priv->deemph;
+
+	return 0;
+}
+
+static int tas5086_put_deemph(struct snd_kcontrol *kcontrol,
+			      struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
+
+	priv->deemph = ucontrol->value.integer.value[0];
+
+	return tas5086_set_deemph(component);
+}
+
+
+static int tas5086_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+				  int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_component *component = codec_dai->component;
+	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
+
+	switch (clk_id) {
+	case TAS5086_CLK_IDX_MCLK:
+		priv->mclk = freq;
+		break;
+	case TAS5086_CLK_IDX_SCLK:
+		priv->sclk = freq;
+		break;
+	}
+
+	return 0;
+}
+
+static int tas5086_set_dai_fmt(struct snd_soc_dai *codec_dai,
+			       unsigned int format)
+{
+	struct snd_soc_component *component = codec_dai->component;
+	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
+
+	/* The TAS5086 can only be slave to all clocks */
+	if ((format & SND_SOC_DAIFMT_MASTER_MASK) != SND_SOC_DAIFMT_CBS_CFS) {
+		dev_err(component->dev, "Invalid clocking mode\n");
+		return -EINVAL;
+	}
+
+	/* we need to refer to the data format from hw_params() */
+	priv->format = format;
+
+	return 0;
+}
+
+static const int tas5086_sample_rates[] = {
+	32000, 38000, 44100, 48000, 88200, 96000, 176400, 192000
+};
+
+static const int tas5086_ratios[] = {
+	64, 128, 192, 256, 384, 512
+};
+
+static int index_in_array(const int *array, int len, int needle)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		if (array[i] == needle)
+			return i;
+
+	return -ENOENT;
+}
+
+static int tas5086_hw_params(struct snd_pcm_substream *substream,
+			     struct snd_pcm_hw_params *params,
+			     struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
+	int val;
+	int ret;
+
+	priv->rate = params_rate(params);
+
+	/* Look up the sample rate and refer to the offset in the list */
+	val = index_in_array(tas5086_sample_rates,
+			     ARRAY_SIZE(tas5086_sample_rates), priv->rate);
+
+	if (val < 0) {
+		dev_err(component->dev, "Invalid sample rate\n");
+		return -EINVAL;
+	}
+
+	ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
+				 TAS5086_CLOCK_RATE_MASK,
+				 TAS5086_CLOCK_RATE(val));
+	if (ret < 0)
+		return ret;
+
+	/* MCLK / Fs ratio */
+	val = index_in_array(tas5086_ratios, ARRAY_SIZE(tas5086_ratios),
+			     priv->mclk / priv->rate);
+	if (val < 0) {
+		dev_err(component->dev, "Invalid MCLK / Fs ratio\n");
+		return -EINVAL;
+	}
+
+	ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
+				 TAS5086_CLOCK_RATIO_MASK,
+				 TAS5086_CLOCK_RATIO(val));
+	if (ret < 0)
+		return ret;
+
+
+	ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
+				 TAS5086_CLOCK_SCLK_RATIO_48,
+				 (priv->sclk == 48 * priv->rate) ? 
+					TAS5086_CLOCK_SCLK_RATIO_48 : 0);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * The chip has a very unituitive register mapping and muxes information
+	 * about data format and sample depth into the same register, but not on
+	 * a logical bit-boundary. Hence, we have to refer to the format passed
+	 * in the set_dai_fmt() callback and set up everything from here.
+	 *
+	 * First, determine the 'base' value, using the format ...
+	 */
+	switch (priv->format & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_RIGHT_J:
+		val = 0x00;
+		break;
+	case SND_SOC_DAIFMT_I2S:
+		val = 0x03;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		val = 0x06;
+		break;
+	default:
+		dev_err(component->dev, "Invalid DAI format\n");
+		return -EINVAL;
+	}
+
+	/* ... then add the offset for the sample bit depth. */
+	switch (params_width(params)) {
+        case 16:
+		val += 0;
+                break;
+	case 20:
+		val += 1;
+		break;
+	case 24:
+		val += 2;
+		break;
+	default:
+		dev_err(component->dev, "Invalid bit width\n");
+		return -EINVAL;
+	}
+
+	ret = regmap_write(priv->regmap, TAS5086_SERIAL_DATA_IF, val);
+	if (ret < 0)
+		return ret;
+
+	/* clock is considered valid now */
+	ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
+				 TAS5086_CLOCK_VALID, TAS5086_CLOCK_VALID);
+	if (ret < 0)
+		return ret;
+
+	return tas5086_set_deemph(component);
+}
+
+static int tas5086_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
+{
+	struct snd_soc_component *component = dai->component;
+	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
+	unsigned int val = 0;
+
+	if (mute)
+		val = TAS5086_SOFT_MUTE_ALL;
+
+	return regmap_write(priv->regmap, TAS5086_SOFT_MUTE, val);
+}
+
+static void tas5086_reset(struct tas5086_private *priv)
+{
+	if (gpio_is_valid(priv->gpio_nreset)) {
+		/* Reset codec - minimum assertion time is 400ns */
+		gpio_direction_output(priv->gpio_nreset, 0);
+		udelay(1);
+		gpio_set_value(priv->gpio_nreset, 1);
+
+		/* Codec needs ~15ms to wake up */
+		msleep(15);
+	}
+}
+
+/* charge period values in microseconds */
+static const int tas5086_charge_period[] = {
+	  13000,  16900,   23400,   31200,   41600,   54600,   72800,   96200,
+	 130000, 156000,  234000,  312000,  416000,  546000,  728000,  962000,
+	1300000, 169000, 2340000, 3120000, 4160000, 5460000, 7280000, 9620000,
+};
+
+static int tas5086_init(struct device *dev, struct tas5086_private *priv)
+{
+	int ret, i;
+
+	/*
+	 * If any of the channels is configured to start in Mid-Z mode,
+	 * configure 'part 1' of the PWM starts to use Mid-Z, and tell
+	 * all configured mid-z channels to start under 'part 1'.
+	 */
+	if (priv->pwm_start_mid_z)
+		regmap_write(priv->regmap, TAS5086_PWM_START,
+			     TAS5086_PWM_START_MIDZ_FOR_START_1 |
+				priv->pwm_start_mid_z);
+
+	/* lookup and set split-capacitor charge period */
+	if (priv->charge_period == 0) {
+		regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE, 0);
+	} else {
+		i = index_in_array(tas5086_charge_period,
+				   ARRAY_SIZE(tas5086_charge_period),
+				   priv->charge_period);
+		if (i >= 0)
+			regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE,
+				     i + 0x08);
+		else
+			dev_warn(dev,
+				 "Invalid split-cap charge period of %d ns.\n",
+				 priv->charge_period);
+	}
+
+	/* enable factory trim */
+	ret = regmap_write(priv->regmap, TAS5086_OSC_TRIM, 0x00);
+	if (ret < 0)
+		return ret;
+
+	/* start all channels */
+	ret = regmap_write(priv->regmap, TAS5086_SYS_CONTROL_2, 0x20);
+	if (ret < 0)
+		return ret;
+
+	/* mute all channels for now */
+	ret = regmap_write(priv->regmap, TAS5086_SOFT_MUTE,
+			   TAS5086_SOFT_MUTE_ALL);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/* TAS5086 controls */
+static const DECLARE_TLV_DB_SCALE(tas5086_dac_tlv, -10350, 50, 1);
+
+static const struct snd_kcontrol_new tas5086_controls[] = {
+	SOC_SINGLE_TLV("Master Playback Volume", TAS5086_MASTER_VOL,
+		       0, 0xff, 1, tas5086_dac_tlv),
+	SOC_DOUBLE_R_TLV("Channel 1/2 Playback Volume",
+			 TAS5086_CHANNEL_VOL(0), TAS5086_CHANNEL_VOL(1),
+			 0, 0xff, 1, tas5086_dac_tlv),
+	SOC_DOUBLE_R_TLV("Channel 3/4 Playback Volume",
+			 TAS5086_CHANNEL_VOL(2), TAS5086_CHANNEL_VOL(3),
+			 0, 0xff, 1, tas5086_dac_tlv),
+	SOC_DOUBLE_R_TLV("Channel 5/6 Playback Volume",
+			 TAS5086_CHANNEL_VOL(4), TAS5086_CHANNEL_VOL(5),
+			 0, 0xff, 1, tas5086_dac_tlv),
+	SOC_SINGLE_BOOL_EXT("De-emphasis Switch", 0,
+			    tas5086_get_deemph, tas5086_put_deemph),
+};
+
+/* Input mux controls */
+static const char *tas5086_dapm_sdin_texts[] =
+{
+	"SDIN1-L", "SDIN1-R", "SDIN2-L", "SDIN2-R",
+	"SDIN3-L", "SDIN3-R", "Ground (0)", "nc"
+};
+
+static const struct soc_enum tas5086_dapm_input_mux_enum[] = {
+	SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 20, 8, tas5086_dapm_sdin_texts),
+	SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 16, 8, tas5086_dapm_sdin_texts),
+	SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 12, 8, tas5086_dapm_sdin_texts),
+	SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 8,  8, tas5086_dapm_sdin_texts),
+	SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 4,  8, tas5086_dapm_sdin_texts),
+	SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 0,  8, tas5086_dapm_sdin_texts),
+};
+
+static const struct snd_kcontrol_new tas5086_dapm_input_mux_controls[] = {
+	SOC_DAPM_ENUM("Channel 1 input", tas5086_dapm_input_mux_enum[0]),
+	SOC_DAPM_ENUM("Channel 2 input", tas5086_dapm_input_mux_enum[1]),
+	SOC_DAPM_ENUM("Channel 3 input", tas5086_dapm_input_mux_enum[2]),
+	SOC_DAPM_ENUM("Channel 4 input", tas5086_dapm_input_mux_enum[3]),
+	SOC_DAPM_ENUM("Channel 5 input", tas5086_dapm_input_mux_enum[4]),
+	SOC_DAPM_ENUM("Channel 6 input", tas5086_dapm_input_mux_enum[5]),
+};
+
+/* Output mux controls */
+static const char *tas5086_dapm_channel_texts[] =
+	{ "Channel 1 Mux", "Channel 2 Mux", "Channel 3 Mux",
+	  "Channel 4 Mux", "Channel 5 Mux", "Channel 6 Mux" };
+
+static const struct soc_enum tas5086_dapm_output_mux_enum[] = {
+	SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 20, 6, tas5086_dapm_channel_texts),
+	SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 16, 6, tas5086_dapm_channel_texts),
+	SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 12, 6, tas5086_dapm_channel_texts),
+	SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 8,  6, tas5086_dapm_channel_texts),
+	SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 4,  6, tas5086_dapm_channel_texts),
+	SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 0,  6, tas5086_dapm_channel_texts),
+};
+
+static const struct snd_kcontrol_new tas5086_dapm_output_mux_controls[] = {
+	SOC_DAPM_ENUM("PWM1 Output", tas5086_dapm_output_mux_enum[0]),
+	SOC_DAPM_ENUM("PWM2 Output", tas5086_dapm_output_mux_enum[1]),
+	SOC_DAPM_ENUM("PWM3 Output", tas5086_dapm_output_mux_enum[2]),
+	SOC_DAPM_ENUM("PWM4 Output", tas5086_dapm_output_mux_enum[3]),
+	SOC_DAPM_ENUM("PWM5 Output", tas5086_dapm_output_mux_enum[4]),
+	SOC_DAPM_ENUM("PWM6 Output", tas5086_dapm_output_mux_enum[5]),
+};
+
+static const struct snd_soc_dapm_widget tas5086_dapm_widgets[] = {
+	SND_SOC_DAPM_INPUT("SDIN1-L"),
+	SND_SOC_DAPM_INPUT("SDIN1-R"),
+	SND_SOC_DAPM_INPUT("SDIN2-L"),
+	SND_SOC_DAPM_INPUT("SDIN2-R"),
+	SND_SOC_DAPM_INPUT("SDIN3-L"),
+	SND_SOC_DAPM_INPUT("SDIN3-R"),
+	SND_SOC_DAPM_INPUT("SDIN4-L"),
+	SND_SOC_DAPM_INPUT("SDIN4-R"),
+
+	SND_SOC_DAPM_OUTPUT("PWM1"),
+	SND_SOC_DAPM_OUTPUT("PWM2"),
+	SND_SOC_DAPM_OUTPUT("PWM3"),
+	SND_SOC_DAPM_OUTPUT("PWM4"),
+	SND_SOC_DAPM_OUTPUT("PWM5"),
+	SND_SOC_DAPM_OUTPUT("PWM6"),
+
+	SND_SOC_DAPM_MUX("Channel 1 Mux", SND_SOC_NOPM, 0, 0,
+			 &tas5086_dapm_input_mux_controls[0]),
+	SND_SOC_DAPM_MUX("Channel 2 Mux", SND_SOC_NOPM, 0, 0,
+			 &tas5086_dapm_input_mux_controls[1]),
+	SND_SOC_DAPM_MUX("Channel 3 Mux", SND_SOC_NOPM, 0, 0,
+			 &tas5086_dapm_input_mux_controls[2]),
+	SND_SOC_DAPM_MUX("Channel 4 Mux", SND_SOC_NOPM, 0, 0,
+			 &tas5086_dapm_input_mux_controls[3]),
+	SND_SOC_DAPM_MUX("Channel 5 Mux", SND_SOC_NOPM, 0, 0,
+			 &tas5086_dapm_input_mux_controls[4]),
+	SND_SOC_DAPM_MUX("Channel 6 Mux", SND_SOC_NOPM, 0, 0,
+			 &tas5086_dapm_input_mux_controls[5]),
+
+	SND_SOC_DAPM_MUX("PWM1 Mux", SND_SOC_NOPM, 0, 0,
+			 &tas5086_dapm_output_mux_controls[0]),
+	SND_SOC_DAPM_MUX("PWM2 Mux", SND_SOC_NOPM, 0, 0,
+			 &tas5086_dapm_output_mux_controls[1]),
+	SND_SOC_DAPM_MUX("PWM3 Mux", SND_SOC_NOPM, 0, 0,
+			 &tas5086_dapm_output_mux_controls[2]),
+	SND_SOC_DAPM_MUX("PWM4 Mux", SND_SOC_NOPM, 0, 0,
+			 &tas5086_dapm_output_mux_controls[3]),
+	SND_SOC_DAPM_MUX("PWM5 Mux", SND_SOC_NOPM, 0, 0,
+			 &tas5086_dapm_output_mux_controls[4]),
+	SND_SOC_DAPM_MUX("PWM6 Mux", SND_SOC_NOPM, 0, 0,
+			 &tas5086_dapm_output_mux_controls[5]),
+};
+
+static const struct snd_soc_dapm_route tas5086_dapm_routes[] = {
+	/* SDIN inputs -> channel muxes */
+	{ "Channel 1 Mux", "SDIN1-L", "SDIN1-L" },
+	{ "Channel 1 Mux", "SDIN1-R", "SDIN1-R" },
+	{ "Channel 1 Mux", "SDIN2-L", "SDIN2-L" },
+	{ "Channel 1 Mux", "SDIN2-R", "SDIN2-R" },
+	{ "Channel 1 Mux", "SDIN3-L", "SDIN3-L" },
+	{ "Channel 1 Mux", "SDIN3-R", "SDIN3-R" },
+
+	{ "Channel 2 Mux", "SDIN1-L", "SDIN1-L" },
+	{ "Channel 2 Mux", "SDIN1-R", "SDIN1-R" },
+	{ "Channel 2 Mux", "SDIN2-L", "SDIN2-L" },
+	{ "Channel 2 Mux", "SDIN2-R", "SDIN2-R" },
+	{ "Channel 2 Mux", "SDIN3-L", "SDIN3-L" },
+	{ "Channel 2 Mux", "SDIN3-R", "SDIN3-R" },
+
+	{ "Channel 2 Mux", "SDIN1-L", "SDIN1-L" },
+	{ "Channel 2 Mux", "SDIN1-R", "SDIN1-R" },
+	{ "Channel 2 Mux", "SDIN2-L", "SDIN2-L" },
+	{ "Channel 2 Mux", "SDIN2-R", "SDIN2-R" },
+	{ "Channel 2 Mux", "SDIN3-L", "SDIN3-L" },
+	{ "Channel 2 Mux", "SDIN3-R", "SDIN3-R" },
+
+	{ "Channel 3 Mux", "SDIN1-L", "SDIN1-L" },
+	{ "Channel 3 Mux", "SDIN1-R", "SDIN1-R" },
+	{ "Channel 3 Mux", "SDIN2-L", "SDIN2-L" },
+	{ "Channel 3 Mux", "SDIN2-R", "SDIN2-R" },
+	{ "Channel 3 Mux", "SDIN3-L", "SDIN3-L" },
+	{ "Channel 3 Mux", "SDIN3-R", "SDIN3-R" },
+
+	{ "Channel 4 Mux", "SDIN1-L", "SDIN1-L" },
+	{ "Channel 4 Mux", "SDIN1-R", "SDIN1-R" },
+	{ "Channel 4 Mux", "SDIN2-L", "SDIN2-L" },
+	{ "Channel 4 Mux", "SDIN2-R", "SDIN2-R" },
+	{ "Channel 4 Mux", "SDIN3-L", "SDIN3-L" },
+	{ "Channel 4 Mux", "SDIN3-R", "SDIN3-R" },
+
+	{ "Channel 5 Mux", "SDIN1-L", "SDIN1-L" },
+	{ "Channel 5 Mux", "SDIN1-R", "SDIN1-R" },
+	{ "Channel 5 Mux", "SDIN2-L", "SDIN2-L" },
+	{ "Channel 5 Mux", "SDIN2-R", "SDIN2-R" },
+	{ "Channel 5 Mux", "SDIN3-L", "SDIN3-L" },
+	{ "Channel 5 Mux", "SDIN3-R", "SDIN3-R" },
+
+	{ "Channel 6 Mux", "SDIN1-L", "SDIN1-L" },
+	{ "Channel 6 Mux", "SDIN1-R", "SDIN1-R" },
+	{ "Channel 6 Mux", "SDIN2-L", "SDIN2-L" },
+	{ "Channel 6 Mux", "SDIN2-R", "SDIN2-R" },
+	{ "Channel 6 Mux", "SDIN3-L", "SDIN3-L" },
+	{ "Channel 6 Mux", "SDIN3-R", "SDIN3-R" },
+
+	/* Channel muxes -> PWM muxes */
+	{ "PWM1 Mux", "Channel 1 Mux", "Channel 1 Mux" },
+	{ "PWM2 Mux", "Channel 1 Mux", "Channel 1 Mux" },
+	{ "PWM3 Mux", "Channel 1 Mux", "Channel 1 Mux" },
+	{ "PWM4 Mux", "Channel 1 Mux", "Channel 1 Mux" },
+	{ "PWM5 Mux", "Channel 1 Mux", "Channel 1 Mux" },
+	{ "PWM6 Mux", "Channel 1 Mux", "Channel 1 Mux" },
+
+	{ "PWM1 Mux", "Channel 2 Mux", "Channel 2 Mux" },
+	{ "PWM2 Mux", "Channel 2 Mux", "Channel 2 Mux" },
+	{ "PWM3 Mux", "Channel 2 Mux", "Channel 2 Mux" },
+	{ "PWM4 Mux", "Channel 2 Mux", "Channel 2 Mux" },
+	{ "PWM5 Mux", "Channel 2 Mux", "Channel 2 Mux" },
+	{ "PWM6 Mux", "Channel 2 Mux", "Channel 2 Mux" },
+
+	{ "PWM1 Mux", "Channel 3 Mux", "Channel 3 Mux" },
+	{ "PWM2 Mux", "Channel 3 Mux", "Channel 3 Mux" },
+	{ "PWM3 Mux", "Channel 3 Mux", "Channel 3 Mux" },
+	{ "PWM4 Mux", "Channel 3 Mux", "Channel 3 Mux" },
+	{ "PWM5 Mux", "Channel 3 Mux", "Channel 3 Mux" },
+	{ "PWM6 Mux", "Channel 3 Mux", "Channel 3 Mux" },
+
+	{ "PWM1 Mux", "Channel 4 Mux", "Channel 4 Mux" },
+	{ "PWM2 Mux", "Channel 4 Mux", "Channel 4 Mux" },
+	{ "PWM3 Mux", "Channel 4 Mux", "Channel 4 Mux" },
+	{ "PWM4 Mux", "Channel 4 Mux", "Channel 4 Mux" },
+	{ "PWM5 Mux", "Channel 4 Mux", "Channel 4 Mux" },
+	{ "PWM6 Mux", "Channel 4 Mux", "Channel 4 Mux" },
+
+	{ "PWM1 Mux", "Channel 5 Mux", "Channel 5 Mux" },
+	{ "PWM2 Mux", "Channel 5 Mux", "Channel 5 Mux" },
+	{ "PWM3 Mux", "Channel 5 Mux", "Channel 5 Mux" },
+	{ "PWM4 Mux", "Channel 5 Mux", "Channel 5 Mux" },
+	{ "PWM5 Mux", "Channel 5 Mux", "Channel 5 Mux" },
+	{ "PWM6 Mux", "Channel 5 Mux", "Channel 5 Mux" },
+
+	{ "PWM1 Mux", "Channel 6 Mux", "Channel 6 Mux" },
+	{ "PWM2 Mux", "Channel 6 Mux", "Channel 6 Mux" },
+	{ "PWM3 Mux", "Channel 6 Mux", "Channel 6 Mux" },
+	{ "PWM4 Mux", "Channel 6 Mux", "Channel 6 Mux" },
+	{ "PWM5 Mux", "Channel 6 Mux", "Channel 6 Mux" },
+	{ "PWM6 Mux", "Channel 6 Mux", "Channel 6 Mux" },
+
+	/* The PWM muxes are directly connected to the PWM outputs */
+	{ "PWM1", NULL, "PWM1 Mux" },
+	{ "PWM2", NULL, "PWM2 Mux" },
+	{ "PWM3", NULL, "PWM3 Mux" },
+	{ "PWM4", NULL, "PWM4 Mux" },
+	{ "PWM5", NULL, "PWM5 Mux" },
+	{ "PWM6", NULL, "PWM6 Mux" },
+
+};
+
+static const struct snd_soc_dai_ops tas5086_dai_ops = {
+	.hw_params	= tas5086_hw_params,
+	.set_sysclk	= tas5086_set_dai_sysclk,
+	.set_fmt	= tas5086_set_dai_fmt,
+	.mute_stream	= tas5086_mute_stream,
+};
+
+static struct snd_soc_dai_driver tas5086_dai = {
+	.name = "tas5086-hifi",
+	.playback = {
+		.stream_name	= "Playback",
+		.channels_min	= 2,
+		.channels_max	= 6,
+		.rates		= TAS5086_PCM_RATES,
+		.formats	= TAS5086_PCM_FORMATS,
+	},
+	.ops = &tas5086_dai_ops,
+};
+
+#ifdef CONFIG_PM
+static int tas5086_soc_suspend(struct snd_soc_component *component)
+{
+	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
+	int ret;
+
+	/* Shut down all channels */
+	ret = regmap_write(priv->regmap, TAS5086_SYS_CONTROL_2, 0x60);
+	if (ret < 0)
+		return ret;
+
+	regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
+
+	return 0;
+}
+
+static int tas5086_soc_resume(struct snd_soc_component *component)
+{
+	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
+	if (ret < 0)
+		return ret;
+
+	tas5086_reset(priv);
+	regcache_mark_dirty(priv->regmap);
+
+	ret = tas5086_init(component->dev, priv);
+	if (ret < 0)
+		return ret;
+
+	ret = regcache_sync(priv->regmap);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+#else
+#define tas5086_soc_suspend	NULL
+#define tas5086_soc_resume	NULL
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_OF
+static const struct of_device_id tas5086_dt_ids[] = {
+	{ .compatible = "ti,tas5086", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, tas5086_dt_ids);
+#endif
+
+static int tas5086_probe(struct snd_soc_component *component)
+{
+	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
+	int i, ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
+	if (ret < 0) {
+		dev_err(component->dev, "Failed to enable regulators: %d\n", ret);
+		return ret;
+	}
+
+	priv->pwm_start_mid_z = 0;
+	priv->charge_period = 1300000; /* hardware default is 1300 ms */
+
+	if (of_match_device(of_match_ptr(tas5086_dt_ids), component->dev)) {
+		struct device_node *of_node = component->dev->of_node;
+
+		of_property_read_u32(of_node, "ti,charge-period",
+				     &priv->charge_period);
+
+		for (i = 0; i < 6; i++) {
+			char name[25];
+
+			snprintf(name, sizeof(name),
+				 "ti,mid-z-channel-%d", i + 1);
+
+			if (of_get_property(of_node, name, NULL) != NULL)
+				priv->pwm_start_mid_z |= 1 << i;
+		}
+	}
+
+	tas5086_reset(priv);
+	ret = tas5086_init(component->dev, priv);
+	if (ret < 0)
+		goto exit_disable_regulators;
+
+	/* set master volume to 0 dB */
+	ret = regmap_write(priv->regmap, TAS5086_MASTER_VOL, 0x30);
+	if (ret < 0)
+		goto exit_disable_regulators;
+
+	return 0;
+
+exit_disable_regulators:
+	regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
+
+	return ret;
+}
+
+static void tas5086_remove(struct snd_soc_component *component)
+{
+	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
+
+	if (gpio_is_valid(priv->gpio_nreset))
+		/* Set codec to the reset state */
+		gpio_set_value(priv->gpio_nreset, 0);
+
+	regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
+};
+
+static const struct snd_soc_component_driver soc_component_dev_tas5086 = {
+	.probe			= tas5086_probe,
+	.remove			= tas5086_remove,
+	.suspend		= tas5086_soc_suspend,
+	.resume			= tas5086_soc_resume,
+	.controls		= tas5086_controls,
+	.num_controls		= ARRAY_SIZE(tas5086_controls),
+	.dapm_widgets		= tas5086_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(tas5086_dapm_widgets),
+	.dapm_routes		= tas5086_dapm_routes,
+	.num_dapm_routes	= ARRAY_SIZE(tas5086_dapm_routes),
+	.idle_bias_on		= 1,
+	.use_pmdown_time	= 1,
+	.endianness		= 1,
+	.non_legacy_dai_naming	= 1,
+};
+
+static const struct i2c_device_id tas5086_i2c_id[] = {
+	{ "tas5086", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tas5086_i2c_id);
+
+static const struct regmap_config tas5086_regmap = {
+	.reg_bits		= 8,
+	.val_bits		= 32,
+	.max_register		= TAS5086_MAX_REGISTER,
+	.reg_defaults		= tas5086_reg_defaults,
+	.num_reg_defaults	= ARRAY_SIZE(tas5086_reg_defaults),
+	.cache_type		= REGCACHE_RBTREE,
+	.volatile_reg		= tas5086_volatile_reg,
+	.writeable_reg		= tas5086_writeable_reg,
+	.readable_reg		= tas5086_accessible_reg,
+	.reg_read		= tas5086_reg_read,
+	.reg_write		= tas5086_reg_write,
+};
+
+static int tas5086_i2c_probe(struct i2c_client *i2c,
+			     const struct i2c_device_id *id)
+{
+	struct tas5086_private *priv;
+	struct device *dev = &i2c->dev;
+	int gpio_nreset = -EINVAL;
+	int i, ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(supply_names); i++)
+		priv->supplies[i].supply = supply_names[i];
+
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(priv->supplies),
+				      priv->supplies);
+	if (ret < 0) {
+		dev_err(dev, "Failed to get regulators: %d\n", ret);
+		return ret;
+	}
+
+	priv->regmap = devm_regmap_init(dev, NULL, i2c, &tas5086_regmap);
+	if (IS_ERR(priv->regmap)) {
+		ret = PTR_ERR(priv->regmap);
+		dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret);
+		return ret;
+	}
+
+	i2c_set_clientdata(i2c, priv);
+
+	if (of_match_device(of_match_ptr(tas5086_dt_ids), dev)) {
+		struct device_node *of_node = dev->of_node;
+		gpio_nreset = of_get_named_gpio(of_node, "reset-gpio", 0);
+	}
+
+	if (gpio_is_valid(gpio_nreset))
+		if (devm_gpio_request(dev, gpio_nreset, "TAS5086 Reset"))
+			gpio_nreset = -EINVAL;
+
+	priv->gpio_nreset = gpio_nreset;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
+	if (ret < 0) {
+		dev_err(dev, "Failed to enable regulators: %d\n", ret);
+		return ret;
+	}
+
+	tas5086_reset(priv);
+
+	/* The TAS5086 always returns 0x03 in its TAS5086_DEV_ID register */
+	ret = regmap_read(priv->regmap, TAS5086_DEV_ID, &i);
+	if (ret == 0 && i != 0x3) {
+		dev_err(dev,
+			"Failed to identify TAS5086 codec (got %02x)\n", i);
+		ret = -ENODEV;
+	}
+
+	/*
+	 * The chip has been identified, so we can turn off the power
+	 * again until the dai link is set up.
+	 */
+	regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
+
+	if (ret == 0)
+		ret = devm_snd_soc_register_component(&i2c->dev,
+					     &soc_component_dev_tas5086,
+					     &tas5086_dai, 1);
+
+	return ret;
+}
+
+static int tas5086_i2c_remove(struct i2c_client *i2c)
+{
+	return 0;
+}
+
+static struct i2c_driver tas5086_i2c_driver = {
+	.driver = {
+		.name	= "tas5086",
+		.of_match_table = of_match_ptr(tas5086_dt_ids),
+	},
+	.id_table	= tas5086_i2c_id,
+	.probe		= tas5086_i2c_probe,
+	.remove		= tas5086_i2c_remove,
+};
+
+module_i2c_driver(tas5086_i2c_driver);
+
+MODULE_AUTHOR("Daniel Mack <zonque@gmail.com>");
+MODULE_DESCRIPTION("Texas Instruments TAS5086 ALSA SoC Codec Driver");
+MODULE_LICENSE("GPL");