diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
tree | a94efe259b9009378be6d90eb30d2b019d95c194 /tools/testing/selftests/bpf/test_tc_tunnel.sh | |
parent | Initial commit. (diff) | |
download | linux-upstream.tar.xz linux-upstream.zip |
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'tools/testing/selftests/bpf/test_tc_tunnel.sh')
-rwxr-xr-x | tools/testing/selftests/bpf/test_tc_tunnel.sh | 295 |
1 files changed, 295 insertions, 0 deletions
diff --git a/tools/testing/selftests/bpf/test_tc_tunnel.sh b/tools/testing/selftests/bpf/test_tc_tunnel.sh new file mode 100755 index 000000000..7c76b841b --- /dev/null +++ b/tools/testing/selftests/bpf/test_tc_tunnel.sh @@ -0,0 +1,295 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# In-place tunneling + +# must match the port that the bpf program filters on +readonly port=8000 + +readonly ns_prefix="ns-$$-" +readonly ns1="${ns_prefix}1" +readonly ns2="${ns_prefix}2" + +readonly ns1_v4=192.168.1.1 +readonly ns2_v4=192.168.1.2 +readonly ns1_v6=fd::1 +readonly ns2_v6=fd::2 + +# Must match port used by bpf program +readonly udpport=5555 +# MPLSoverUDP +readonly mplsudpport=6635 +readonly mplsproto=137 + +readonly infile="$(mktemp)" +readonly outfile="$(mktemp)" + +setup() { + ip netns add "${ns1}" + ip netns add "${ns2}" + + ip link add dev veth1 mtu 1500 netns "${ns1}" type veth \ + peer name veth2 mtu 1500 netns "${ns2}" + + ip netns exec "${ns1}" ethtool -K veth1 tso off + + ip -netns "${ns1}" link set veth1 up + ip -netns "${ns2}" link set veth2 up + + ip -netns "${ns1}" -4 addr add "${ns1_v4}/24" dev veth1 + ip -netns "${ns2}" -4 addr add "${ns2_v4}/24" dev veth2 + ip -netns "${ns1}" -6 addr add "${ns1_v6}/64" dev veth1 nodad + ip -netns "${ns2}" -6 addr add "${ns2_v6}/64" dev veth2 nodad + + # clamp route to reserve room for tunnel headers + ip -netns "${ns1}" -4 route flush table main + ip -netns "${ns1}" -6 route flush table main + ip -netns "${ns1}" -4 route add "${ns2_v4}" mtu 1458 dev veth1 + ip -netns "${ns1}" -6 route add "${ns2_v6}" mtu 1438 dev veth1 + + sleep 1 + + dd if=/dev/urandom of="${infile}" bs="${datalen}" count=1 status=none +} + +cleanup() { + ip netns del "${ns2}" + ip netns del "${ns1}" + + if [[ -f "${outfile}" ]]; then + rm "${outfile}" + fi + if [[ -f "${infile}" ]]; then + rm "${infile}" + fi + + if [[ -n $server_pid ]]; then + kill $server_pid 2> /dev/null + fi +} + +server_listen() { + ip netns exec "${ns2}" nc "${netcat_opt}" -l -p "${port}" > "${outfile}" & + server_pid=$! + sleep 0.2 +} + +client_connect() { + ip netns exec "${ns1}" timeout 2 nc "${netcat_opt}" -w 1 "${addr2}" "${port}" < "${infile}" + echo $? +} + +verify_data() { + wait "${server_pid}" + server_pid= + # sha1sum returns two fields [sha1] [filepath] + # convert to bash array and access first elem + insum=($(sha1sum ${infile})) + outsum=($(sha1sum ${outfile})) + if [[ "${insum[0]}" != "${outsum[0]}" ]]; then + echo "data mismatch" + exit 1 + fi +} + +set -e + +# no arguments: automated test, run all +if [[ "$#" -eq "0" ]]; then + echo "ipip" + $0 ipv4 ipip none 100 + + echo "ip6ip6" + $0 ipv6 ip6tnl none 100 + + echo "sit" + $0 ipv6 sit none 100 + + for mac in none mpls eth ; do + echo "ip gre $mac" + $0 ipv4 gre $mac 100 + + echo "ip6 gre $mac" + $0 ipv6 ip6gre $mac 100 + + echo "ip gre $mac gso" + $0 ipv4 gre $mac 2000 + + echo "ip6 gre $mac gso" + $0 ipv6 ip6gre $mac 2000 + + echo "ip udp $mac" + $0 ipv4 udp $mac 100 + + echo "ip6 udp $mac" + $0 ipv6 ip6udp $mac 100 + + echo "ip udp $mac gso" + $0 ipv4 udp $mac 2000 + + echo "ip6 udp $mac gso" + $0 ipv6 ip6udp $mac 2000 + done + + echo "OK. All tests passed" + exit 0 +fi + +if [[ "$#" -ne "4" ]]; then + echo "Usage: $0" + echo " or: $0 <ipv4|ipv6> <tuntype> <none|mpls|eth> <data_len>" + exit 1 +fi + +case "$1" in +"ipv4") + readonly addr1="${ns1_v4}" + readonly addr2="${ns2_v4}" + readonly ipproto=4 + readonly netcat_opt=-${ipproto} + readonly foumod=fou + readonly foutype=ipip + readonly fouproto=4 + readonly fouproto_mpls=${mplsproto} + readonly gretaptype=gretap + ;; +"ipv6") + readonly addr1="${ns1_v6}" + readonly addr2="${ns2_v6}" + readonly ipproto=6 + readonly netcat_opt=-${ipproto} + readonly foumod=fou6 + readonly foutype=ip6tnl + readonly fouproto="41 -6" + readonly fouproto_mpls="${mplsproto} -6" + readonly gretaptype=ip6gretap + ;; +*) + echo "unknown arg: $1" + exit 1 + ;; +esac + +readonly tuntype=$2 +readonly mac=$3 +readonly datalen=$4 + +echo "encap ${addr1} to ${addr2}, type ${tuntype}, mac ${mac} len ${datalen}" + +trap cleanup EXIT + +setup + +# basic communication works +echo "test basic connectivity" +server_listen +client_connect +verify_data + +# clientside, insert bpf program to encap all TCP to port ${port} +# client can no longer connect +ip netns exec "${ns1}" tc qdisc add dev veth1 clsact +ip netns exec "${ns1}" tc filter add dev veth1 egress \ + bpf direct-action object-file ./test_tc_tunnel.o \ + section "encap_${tuntype}_${mac}" +echo "test bpf encap without decap (expect failure)" +server_listen +! client_connect + +if [[ "$tuntype" =~ "udp" ]]; then + # Set up fou tunnel. + ttype="${foutype}" + targs="encap fou encap-sport auto encap-dport $udpport" + # fou may be a module; allow this to fail. + modprobe "${foumod}" ||true + if [[ "$mac" == "mpls" ]]; then + dport=${mplsudpport} + dproto=${fouproto_mpls} + tmode="mode any ttl 255" + else + dport=${udpport} + dproto=${fouproto} + fi + ip netns exec "${ns2}" ip fou add port $dport ipproto ${dproto} + targs="encap fou encap-sport auto encap-dport $dport" +elif [[ "$tuntype" =~ "gre" && "$mac" == "eth" ]]; then + ttype=$gretaptype +else + ttype=$tuntype + targs="" +fi + +# tunnel address family differs from inner for SIT +if [[ "${tuntype}" == "sit" ]]; then + link_addr1="${ns1_v4}" + link_addr2="${ns2_v4}" +else + link_addr1="${addr1}" + link_addr2="${addr2}" +fi + +# serverside, insert decap module +# server is still running +# client can connect again +ip netns exec "${ns2}" ip link add name testtun0 type "${ttype}" \ + ${tmode} remote "${link_addr1}" local "${link_addr2}" $targs + +expect_tun_fail=0 + +if [[ "$tuntype" == "ip6udp" && "$mac" == "mpls" ]]; then + # No support for MPLS IPv6 fou tunnel; expect failure. + expect_tun_fail=1 +elif [[ "$tuntype" =~ "udp" && "$mac" == "eth" ]]; then + # No support for TEB fou tunnel; expect failure. + expect_tun_fail=1 +elif [[ "$tuntype" =~ "gre" && "$mac" == "eth" ]]; then + # Share ethernet address between tunnel/veth2 so L2 decap works. + ethaddr=$(ip netns exec "${ns2}" ip link show veth2 | \ + awk '/ether/ { print $2 }') + ip netns exec "${ns2}" ip link set testtun0 address $ethaddr +elif [[ "$mac" == "mpls" ]]; then + modprobe mpls_iptunnel ||true + modprobe mpls_gso ||true + ip netns exec "${ns2}" sysctl -qw net.mpls.platform_labels=65536 + ip netns exec "${ns2}" ip -f mpls route add 1000 dev lo + ip netns exec "${ns2}" ip link set lo up + ip netns exec "${ns2}" sysctl -qw net.mpls.conf.testtun0.input=1 + ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.lo.rp_filter=0 +fi + +# Because packets are decapped by the tunnel they arrive on testtun0 from +# the IP stack perspective. Ensure reverse path filtering is disabled +# otherwise we drop the TCP SYN as arriving on testtun0 instead of the +# expected veth2 (veth2 is where 192.168.1.2 is configured). +ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.all.rp_filter=0 +# rp needs to be disabled for both all and testtun0 as the rp value is +# selected as the max of the "all" and device-specific values. +ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.testtun0.rp_filter=0 +ip netns exec "${ns2}" ip link set dev testtun0 up +if [[ "$expect_tun_fail" == 1 ]]; then + # This tunnel mode is not supported, so we expect failure. + echo "test bpf encap with tunnel device decap (expect failure)" + ! client_connect +else + echo "test bpf encap with tunnel device decap" + client_connect + verify_data + server_listen +fi + +# bpf_skb_net_shrink does not take tunnel flags yet, cannot update L3. +if [[ "${tuntype}" == "sit" ]]; then + echo OK + exit 0 +fi + +# serverside, use BPF for decap +ip netns exec "${ns2}" ip link del dev testtun0 +ip netns exec "${ns2}" tc qdisc add dev veth2 clsact +ip netns exec "${ns2}" tc filter add dev veth2 ingress \ + bpf direct-action object-file ./test_tc_tunnel.o section decap +echo "test bpf encap with bpf decap" +client_connect +verify_data + +echo OK |