diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
tree | a94efe259b9009378be6d90eb30d2b019d95c194 /tools/testing/selftests/firmware/fw_filesystem.sh | |
parent | Initial commit. (diff) | |
download | linux-upstream.tar.xz linux-upstream.zip |
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'tools/testing/selftests/firmware/fw_filesystem.sh')
-rwxr-xr-x | tools/testing/selftests/firmware/fw_filesystem.sh | 552 |
1 files changed, 552 insertions, 0 deletions
diff --git a/tools/testing/selftests/firmware/fw_filesystem.sh b/tools/testing/selftests/firmware/fw_filesystem.sh new file mode 100755 index 000000000..c2a2a1001 --- /dev/null +++ b/tools/testing/selftests/firmware/fw_filesystem.sh @@ -0,0 +1,552 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# This validates that the kernel will load firmware out of its list of +# firmware locations on disk. Since the user helper does similar work, +# we reset the custom load directory to a location the user helper doesn't +# know so we can be sure we're not accidentally testing the user helper. +set -e + +TEST_REQS_FW_SYSFS_FALLBACK="no" +TEST_REQS_FW_SET_CUSTOM_PATH="yes" +TEST_DIR=$(dirname $0) +source $TEST_DIR/fw_lib.sh + +check_mods +check_setup +verify_reqs +setup_tmp_file + +trap "test_finish" EXIT + +if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then + # Turn down the timeout so failures don't take so long. + echo 1 >/sys/class/firmware/timeout +fi + +if printf '\000' >"$DIR"/trigger_request 2> /dev/null; then + echo "$0: empty filename should not succeed" >&2 + exit 1 +fi + +if [ ! -e "$DIR"/trigger_async_request ]; then + echo "$0: empty filename: async trigger not present, ignoring test" >&2 + exit $ksft_skip +else + if printf '\000' >"$DIR"/trigger_async_request 2> /dev/null; then + echo "$0: empty filename should not succeed (async)" >&2 + exit 1 + fi +fi + +# Request a firmware that doesn't exist, it should fail. +if echo -n "nope-$NAME" >"$DIR"/trigger_request 2> /dev/null; then + echo "$0: firmware shouldn't have loaded" >&2 + exit 1 +fi +if diff -q "$FW" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was not expected to match" >&2 + exit 1 +else + if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then + echo "$0: timeout works" + fi +fi + +# This should succeed via kernel load or will fail after 1 second after +# being handed over to the user helper, which won't find the fw either. +if ! echo -n "$NAME" >"$DIR"/trigger_request ; then + echo "$0: could not trigger request" >&2 + exit 1 +fi + +# Verify the contents are what we expect. +if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was not loaded" >&2 + exit 1 +else + echo "$0: filesystem loading works" +fi + +# Try the asynchronous version too +if [ ! -e "$DIR"/trigger_async_request ]; then + echo "$0: firmware loading: async trigger not present, ignoring test" >&2 + exit $ksft_skip +else + if ! echo -n "$NAME" >"$DIR"/trigger_async_request ; then + echo "$0: could not trigger async request" >&2 + exit 1 + fi + + # Verify the contents are what we expect. + if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was not loaded (async)" >&2 + exit 1 + else + echo "$0: async filesystem loading works" + fi +fi + +# Try platform (EFI embedded fw) loading too +if [ ! -e "$DIR"/trigger_request_platform ]; then + echo "$0: firmware loading: platform trigger not present, ignoring test" >&2 +else + if printf '\000' >"$DIR"/trigger_request_platform 2> /dev/null; then + echo "$0: empty filename should not succeed (platform)" >&2 + exit 1 + fi + + # Note we echo a non-existing name, since files on the file-system + # are preferred over firmware embedded inside the platform's firmware + # The test adds a fake entry with the requested name to the platform's + # fw list, so the name does not matter as long as it does not exist + if ! echo -n "nope-$NAME" >"$DIR"/trigger_request_platform ; then + echo "$0: could not trigger request platform" >&2 + exit 1 + fi + + # The test verifies itself that the loaded firmware contents matches + # the contents for the fake platform fw entry it added. + echo "$0: platform loading works" +fi + +### Batched requests tests +test_config_present() +{ + if [ ! -f $DIR/reset ]; then + echo "Configuration triggers not present, ignoring test" + exit $ksft_skip + fi +} + +# Defaults : +# +# send_uevent: 1 +# sync_direct: 0 +# name: test-firmware.bin +# num_requests: 4 +config_reset() +{ + echo 1 > $DIR/reset +} + +release_all_firmware() +{ + echo 1 > $DIR/release_all_firmware +} + +config_set_name() +{ + echo -n $1 > $DIR/config_name +} + +config_set_into_buf() +{ + echo 1 > $DIR/config_into_buf +} + +config_unset_into_buf() +{ + echo 0 > $DIR/config_into_buf +} + +config_set_buf_size() +{ + echo $1 > $DIR/config_buf_size +} + +config_set_file_offset() +{ + echo $1 > $DIR/config_file_offset +} + +config_set_partial() +{ + echo 1 > $DIR/config_partial +} + +config_unset_partial() +{ + echo 0 > $DIR/config_partial +} + +config_set_sync_direct() +{ + echo 1 > $DIR/config_sync_direct +} + +config_unset_sync_direct() +{ + echo 0 > $DIR/config_sync_direct +} + +config_set_uevent() +{ + echo 1 > $DIR/config_send_uevent +} + +config_unset_uevent() +{ + echo 0 > $DIR/config_send_uevent +} + +config_trigger_sync() +{ + echo -n 1 > $DIR/trigger_batched_requests 2>/dev/null +} + +config_trigger_async() +{ + echo -n 1 > $DIR/trigger_batched_requests_async 2> /dev/null +} + +config_set_read_fw_idx() +{ + echo -n $1 > $DIR/config_read_fw_idx 2> /dev/null +} + +read_firmwares() +{ + if [ "$(cat $DIR/config_into_buf)" == "1" ]; then + fwfile="$FW_INTO_BUF" + else + fwfile="$FW" + fi + if [ "$1" = "xzonly" ]; then + fwfile="${fwfile}-orig" + fi + for i in $(seq 0 3); do + config_set_read_fw_idx $i + # Verify the contents are what we expect. + # -Z required for now -- check for yourself, md5sum + # on $FW and DIR/read_firmware will yield the same. Even + # cmp agrees, so something is off. + if ! diff -q -Z "$fwfile" $DIR/read_firmware 2>/dev/null ; then + echo "request #$i: firmware was not loaded" >&2 + exit 1 + fi + done +} + +read_partial_firmwares() +{ + if [ "$(cat $DIR/config_into_buf)" == "1" ]; then + fwfile="${FW_INTO_BUF}" + else + fwfile="${FW}" + fi + + if [ "$1" = "xzonly" ]; then + fwfile="${fwfile}-orig" + fi + + # Strip fwfile down to match partial offset and length + partial_data="$(cat $fwfile)" + partial_data="${partial_data:$2:$3}" + + for i in $(seq 0 3); do + config_set_read_fw_idx $i + + read_firmware="$(cat $DIR/read_firmware)" + + # Verify the contents are what we expect. + if [ $read_firmware != $partial_data ]; then + echo "request #$i: partial firmware was not loaded" >&2 + exit 1 + fi + done +} + +read_firmwares_expect_nofile() +{ + for i in $(seq 0 3); do + config_set_read_fw_idx $i + # Ensures contents differ + if diff -q -Z "$FW" $DIR/read_firmware 2>/dev/null ; then + echo "request $i: file was not expected to match" >&2 + exit 1 + fi + done +} + +test_batched_request_firmware_nofile() +{ + echo -n "Batched request_firmware() nofile try #$1: " + config_reset + config_set_name nope-test-firmware.bin + config_trigger_sync + read_firmwares_expect_nofile + release_all_firmware + echo "OK" +} + +test_batched_request_firmware_into_buf_nofile() +{ + echo -n "Batched request_firmware_into_buf() nofile try #$1: " + config_reset + config_set_name nope-test-firmware.bin + config_set_into_buf + config_trigger_sync + read_firmwares_expect_nofile + release_all_firmware + echo "OK" +} + +test_request_partial_firmware_into_buf_nofile() +{ + echo -n "Test request_partial_firmware_into_buf() off=$1 size=$2 nofile: " + config_reset + config_set_name nope-test-firmware.bin + config_set_into_buf + config_set_partial + config_set_buf_size $2 + config_set_file_offset $1 + config_trigger_sync + read_firmwares_expect_nofile + release_all_firmware + echo "OK" +} + +test_batched_request_firmware_direct_nofile() +{ + echo -n "Batched request_firmware_direct() nofile try #$1: " + config_reset + config_set_name nope-test-firmware.bin + config_set_sync_direct + config_trigger_sync + release_all_firmware + echo "OK" +} + +test_request_firmware_nowait_uevent_nofile() +{ + echo -n "Batched request_firmware_nowait(uevent=true) nofile try #$1: " + config_reset + config_set_name nope-test-firmware.bin + config_trigger_async + release_all_firmware + echo "OK" +} + +test_wait_and_cancel_custom_load() +{ + if [ "$HAS_FW_LOADER_USER_HELPER" != "yes" ]; then + return + fi + local timeout=10 + name=$1 + while [ ! -e "$DIR"/"$name"/loading ]; do + sleep 0.1 + timeout=$(( $timeout - 1 )) + if [ "$timeout" -eq 0 ]; then + echo "firmware interface never appeared:" >&2 + echo "$DIR/$name/loading" >&2 + exit 1 + fi + done + echo -1 >"$DIR"/"$name"/loading +} + +test_request_firmware_nowait_custom_nofile() +{ + echo -n "Batched request_firmware_nowait(uevent=false) nofile try #$1: " + config_reset + config_unset_uevent + RANDOM_FILE_PATH=$(setup_random_file_fake) + RANDOM_FILE="$(basename $RANDOM_FILE_PATH)" + config_set_name $RANDOM_FILE + config_trigger_async & + test_wait_and_cancel_custom_load $RANDOM_FILE + wait + release_all_firmware + echo "OK" +} + +test_batched_request_firmware() +{ + echo -n "Batched request_firmware() $2 try #$1: " + config_reset + config_trigger_sync + read_firmwares $2 + release_all_firmware + echo "OK" +} + +test_batched_request_firmware_into_buf() +{ + echo -n "Batched request_firmware_into_buf() $2 try #$1: " + config_reset + config_set_name $TEST_FIRMWARE_INTO_BUF_FILENAME + config_set_into_buf + config_trigger_sync + read_firmwares $2 + release_all_firmware + echo "OK" +} + +test_batched_request_firmware_direct() +{ + echo -n "Batched request_firmware_direct() $2 try #$1: " + config_reset + config_set_sync_direct + config_trigger_sync + release_all_firmware + echo "OK" +} + +test_request_firmware_nowait_uevent() +{ + echo -n "Batched request_firmware_nowait(uevent=true) $2 try #$1: " + config_reset + config_trigger_async + release_all_firmware + echo "OK" +} + +test_request_firmware_nowait_custom() +{ + echo -n "Batched request_firmware_nowait(uevent=false) $2 try #$1: " + config_reset + config_unset_uevent + RANDOM_FILE_PATH=$(setup_random_file) + RANDOM_FILE="$(basename $RANDOM_FILE_PATH)" + if [ "$2" = "both" ]; then + xz -9 -C crc32 -k $RANDOM_FILE_PATH + elif [ "$2" = "xzonly" ]; then + xz -9 -C crc32 $RANDOM_FILE_PATH + fi + config_set_name $RANDOM_FILE + config_trigger_async + release_all_firmware + echo "OK" +} + +test_request_partial_firmware_into_buf() +{ + echo -n "Test request_partial_firmware_into_buf() off=$1 size=$2: " + config_reset + config_set_name $TEST_FIRMWARE_INTO_BUF_FILENAME + config_set_into_buf + config_set_partial + config_set_buf_size $2 + config_set_file_offset $1 + config_trigger_sync + read_partial_firmwares normal $1 $2 + release_all_firmware + echo "OK" +} + +# Only continue if batched request triggers are present on the +# test-firmware driver +test_config_present + +# test with the file present +echo +echo "Testing with the file present..." +for i in $(seq 1 5); do + test_batched_request_firmware $i normal +done + +for i in $(seq 1 5); do + test_batched_request_firmware_into_buf $i normal +done + +for i in $(seq 1 5); do + test_batched_request_firmware_direct $i normal +done + +for i in $(seq 1 5); do + test_request_firmware_nowait_uevent $i normal +done + +for i in $(seq 1 5); do + test_request_firmware_nowait_custom $i normal +done + +# Partial loads cannot use fallback, so do not repeat tests. +test_request_partial_firmware_into_buf 0 10 +test_request_partial_firmware_into_buf 0 5 +test_request_partial_firmware_into_buf 1 6 +test_request_partial_firmware_into_buf 2 10 + +# Test for file not found, errors are expected, the failure would be +# a hung task, which would require a hard reset. +echo +echo "Testing with the file missing..." +for i in $(seq 1 5); do + test_batched_request_firmware_nofile $i +done + +for i in $(seq 1 5); do + test_batched_request_firmware_into_buf_nofile $i +done + +for i in $(seq 1 5); do + test_batched_request_firmware_direct_nofile $i +done + +for i in $(seq 1 5); do + test_request_firmware_nowait_uevent_nofile $i +done + +for i in $(seq 1 5); do + test_request_firmware_nowait_custom_nofile $i +done + +# Partial loads cannot use fallback, so do not repeat tests. +test_request_partial_firmware_into_buf_nofile 0 10 +test_request_partial_firmware_into_buf_nofile 0 5 +test_request_partial_firmware_into_buf_nofile 1 6 +test_request_partial_firmware_into_buf_nofile 2 10 + +test "$HAS_FW_LOADER_COMPRESS" != "yes" && exit 0 + +# test with both files present +xz -9 -C crc32 -k $FW +config_set_name $NAME +echo +echo "Testing with both plain and xz files present..." +for i in $(seq 1 5); do + test_batched_request_firmware $i both +done + +for i in $(seq 1 5); do + test_batched_request_firmware_into_buf $i both +done + +for i in $(seq 1 5); do + test_batched_request_firmware_direct $i both +done + +for i in $(seq 1 5); do + test_request_firmware_nowait_uevent $i both +done + +for i in $(seq 1 5); do + test_request_firmware_nowait_custom $i both +done + +# test with only xz file present +mv "$FW" "${FW}-orig" +echo +echo "Testing with only xz file present..." +for i in $(seq 1 5); do + test_batched_request_firmware $i xzonly +done + +for i in $(seq 1 5); do + test_batched_request_firmware_into_buf $i xzonly +done + +for i in $(seq 1 5); do + test_batched_request_firmware_direct $i xzonly +done + +for i in $(seq 1 5); do + test_request_firmware_nowait_uevent $i xzonly +done + +for i in $(seq 1 5); do + test_request_firmware_nowait_custom $i xzonly +done + +exit 0 |