diff options
Diffstat (limited to 'Documentation/devicetree/bindings/hwmon')
51 files changed, 2124 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/hwmon/ad741x.txt b/Documentation/devicetree/bindings/hwmon/ad741x.txt new file mode 100644 index 000000000..9102152c8 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ad741x.txt @@ -0,0 +1,15 @@ +* AD7416/AD7417/AD7418 Temperature Sensor Device Tree Bindings + +Required properties: +- compatible: one of + "adi,ad7416" + "adi,ad7417" + "adi,ad7418" +- reg: I2C address + +Example: + +hwmon@28 { + compatible = "adi,ad7418"; + reg = <0x28>; +}; diff --git a/Documentation/devicetree/bindings/hwmon/adc128d818.txt b/Documentation/devicetree/bindings/hwmon/adc128d818.txt new file mode 100644 index 000000000..d0ae46d7b --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adc128d818.txt @@ -0,0 +1,38 @@ +TI ADC128D818 ADC System Monitor With Temperature Sensor +-------------------------------------------------------- + +Operation modes: + + - Mode 0: 7 single-ended voltage readings (IN0-IN6), + 1 temperature reading (internal) + - Mode 1: 8 single-ended voltage readings (IN0-IN7), + no temperature + - Mode 2: 4 pseudo-differential voltage readings + (IN0-IN1, IN3-IN2, IN4-IN5, IN7-IN6), + 1 temperature reading (internal) + - Mode 3: 4 single-ended voltage readings (IN0-IN3), + 2 pseudo-differential voltage readings + (IN4-IN5, IN7-IN6), + 1 temperature reading (internal) + +If no operation mode is configured via device tree, the driver keeps the +currently active chip operation mode (default is mode 0). + + +Required node properties: + + - compatible: must be set to "ti,adc128d818" + - reg: I2C address of the device + +Optional node properties: + + - ti,mode: Operation mode (u8) (see above). + + +Example (operation mode 2): + + adc128d818@1d { + compatible = "ti,adc128d818"; + reg = <0x1d>; + ti,mode = /bits/ 8 <2>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml new file mode 100644 index 000000000..154bee851 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,adm1177.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + - Beniamin Bia <beniamin.bia@analog.com> + +description: | + Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor + https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1177.pdf + +properties: + compatible: + enum: + - adi,adm1177 + + reg: + maxItems: 1 + + avcc-supply: + description: + Phandle to the Avcc power supply + + shunt-resistor-micro-ohms: + description: + The value of curent sense resistor in microohms. If not provided, + the current reading and overcurrent alert is disabled. + + adi,shutdown-threshold-microamp: + description: + Specifies the current level at which an over current alert occurs. + If not provided, the overcurrent alert is configured to max ADC range + based on shunt-resistor-micro-ohms. + + adi,vrange-high-enable: + description: + Specifies which internal voltage divider to be used. A 1 selects + a 7:2 voltage divider while a 0 selects a 14:1 voltage divider. + type: boolean + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + pwmon@5a { + compatible = "adi,adm1177"; + reg = <0x5a>; + shunt-resistor-micro-ohms = <50000>; /* 50 mOhm */ + adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */ + adi,vrange-high-enable; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml new file mode 100644 index 000000000..43b4f4f57 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,adm1266.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADM1266 Cascadable Super Sequencer with Margin + Control and Fault Recording + +maintainers: + - Alexandru Tachici <alexandru.tachici@analog.com> + +description: | + Analog Devices ADM1266 Cascadable Super Sequencer with Margin + Control and Fault Recording. + https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1266.pdf + +properties: + compatible: + enum: + - adi,adm1266 + + reg: + description: | + I2C address of slave device. + items: + minimum: 0x40 + maximum: 0x4F + + avcc-supply: + description: | + Phandle to the Avcc power supply. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + adm1266@40 { + compatible = "adi,adm1266"; + reg = <0x40>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml new file mode 100644 index 000000000..6747b870f --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2019 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,axi-fan-control.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AXI FAN Control Device Tree Bindings + +maintainers: + - Nuno Sá <nuno.sa@analog.com> + +description: |+ + Bindings for the Analog Devices AXI FAN Control driver. Spefications of the + core can be found in: + + https://wiki.analog.com/resources/fpga/docs/axi_fan_control + +properties: + compatible: + enum: + - adi,axi-fan-control-1.00.a + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + pulses-per-revolution: + description: + Value specifying the number of pulses per revolution of the controlled + FAN. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4] + +required: + - compatible + - reg + - clocks + - interrupts + - pulses-per-revolution + +additionalProperties: false + +examples: + - | + fpga_axi: fpga-axi { + #address-cells = <0x2>; + #size-cells = <0x1>; + + axi_fan_control: axi-fan-control@80000000 { + compatible = "adi,axi-fan-control-1.00.a"; + reg = <0x0 0x80000000 0x10000>; + clocks = <&clk 71>; + interrupts = <0 110 0>; + pulses-per-revolution = <2>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml new file mode 100644 index 000000000..eef614962 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,ltc2947.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC2947 high precision power and energy monitor + +maintainers: + - Nuno Sá <nuno.sa@analog.com> + +description: | + Analog Devices LTC2947 high precision power and energy monitor over SPI or I2C. + + https://www.analog.com/media/en/technical-documentation/data-sheets/LTC2947.pdf + +properties: + compatible: + enum: + - adi,ltc2947 + + reg: + maxItems: 1 + + clocks: + description: + The LTC2947 uses either a trimmed internal oscillator or an external clock + as the time base for determining the integration period to represent time, + charge and energy. When an external clock is used, this property must be + set accordingly. + maxItems: 1 + + adi,accumulator-ctl-pol: + description: + This property controls the polarity of current that is accumulated to + calculate charge and energy so that, they can be only accumulated for + positive current for example. Since there are two sets of registers for + the accumulated values, this entry can also have two items which sets + energy1/charge1 and energy2/charger2 respectively. Check table 12 of the + datasheet for more information on the supported options. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + items: + enum: [0, 1, 2, 3] + default: 0 + + adi,accumulation-deadband-microamp: + description: + This property controls the Accumulation Dead band which allows to set the + level of current below which no accumulation takes place. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 255 + default: 0 + + adi,gpio-out-pol: + description: + This property controls the GPIO polarity. Setting it to one makes the GPIO + active high, setting it to zero makets it active low. When this property + is present, the GPIO is automatically configured as output and set to + control a fan as a function of measured temperature. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + default: 0 + + adi,gpio-in-accum: + description: + When set, this property sets the GPIO as input. It is then used to control + the accumulation of charge, energy and time. This function can be + enabled/configured separately for each of the two sets of accumulation + registers. Check table 13 of the datasheet for more information on the + supported options. This property cannot be used together with + adi,gpio-out-pol. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + items: + enum: [0, 1, 2] + default: 0 + +required: + - compatible + - reg + + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + ltc2947_spi: ltc2947@0 { + compatible = "adi,ltc2947"; + reg = <0>; + /* accumulation takes place always for energ1/charge1. */ + /* accumulation only on positive current for energy2/charge2. */ + adi,accumulator-ctl-pol = <0 1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/adm1275.txt b/Documentation/devicetree/bindings/hwmon/adm1275.txt new file mode 100644 index 000000000..1ecd03f3d --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adm1275.txt @@ -0,0 +1,25 @@ +adm1275 properties + +Required properties: +- compatible: Must be one of the supported compatible strings: + - "adi,adm1075" for adm1075 + - "adi,adm1272" for adm1272 + - "adi,adm1275" for adm1275 + - "adi,adm1276" for adm1276 + - "adi,adm1278" for adm1278 + - "adi,adm1293" for adm1293 + - "adi,adm1294" for adm1294 +- reg: I2C address + +Optional properties: + +- shunt-resistor-micro-ohms + Shunt resistor value in micro-Ohm + +Example: + +adm1272@10 { + compatible = "adi,adm1272"; + reg = <0x10>; + shunt-resistor-micro-ohms = <500>; +}; diff --git a/Documentation/devicetree/bindings/hwmon/ads7828.txt b/Documentation/devicetree/bindings/hwmon/ads7828.txt new file mode 100644 index 000000000..fe0cc4ad7 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ads7828.txt @@ -0,0 +1,25 @@ +ads7828 properties + +Required properties: +- compatible: Should be one of + ti,ads7828 + ti,ads7830 +- reg: I2C address + +Optional properties: + +- ti,differential-input + Set to use the device in differential mode. +- vref-supply + The external reference on the device is set to this regulators output. If it + does not exists the internal reference will be used and output by the ads78xx + on the "external vref" pin. + + Example ADS7828 node: + + ads7828: ads@48 { + comatible = "ti,ads7828"; + reg = <0x48>; + vref-supply = <&vref>; + ti,differential-input; + }; diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml new file mode 100644 index 000000000..ad0ec9f35 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adt7475.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADT7475 hwmon sensor + +maintainers: + - Jean Delvare <jdelvare@suse.com> + +description: | + The ADT7473, ADT7475, ADT7476, and ADT7490 are thermal monitors and multiple + PWN fan controllers. + + They support monitoring and controlling up to four fans (the ADT7490 can only + control up to three). They support reading a single on chip temperature + sensor and two off chip temperature sensors (the ADT7490 additionally + supports measuring up to three current external temperature sensors with + series resistance cancellation (SRC)). + + Datasheets: + https://www.onsemi.com/pub/Collateral/ADT7473-D.PDF + https://www.onsemi.com/pub/Collateral/ADT7475-D.PDF + https://www.onsemi.com/pub/Collateral/ADT7476-D.PDF + https://www.onsemi.com/pub/Collateral/ADT7490-D.PDF + + Description taken from onsemiconductors specification sheets, with minor + rephrasing. + +properties: + compatible: + enum: + - adi,adt7473 + - adi,adt7475 + - adi,adt7476 + - adi,adt7490 + + reg: + maxItems: 1 + +patternProperties: + "^adi,bypass-attenuator-in[0-4]$": + description: | + Configures bypassing the individual voltage input attenuator. If + set to 1 the attenuator is bypassed if set to 0 the attenuator is + not bypassed. If the property is absent then the attenuator + retains it's configuration from the bios/bootloader. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + "^adi,pwm-active-state$": + description: | + Integer array, represents the active state of the pwm outputs If set to 0 + the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm + uses a logic high output for 100% duty cycle. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + items: + enum: [0, 1] + default: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hwmon@2e { + compatible = "adi,adt7476"; + reg = <0x2e>; + adi,bypass-attenuator-in0 = <1>; + adi,bypass-attenuator-in1 = <0>; + adi,pwm-active-state = <1 0 1>; + }; + }; + diff --git a/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt b/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt new file mode 100644 index 000000000..59b38557f --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt @@ -0,0 +1,14 @@ +APM X-Gene hwmon driver + +APM X-Gene SOC sensors are accessed over the "SLIMpro" mailbox. + +Required properties : + - compatible : should be "apm,xgene-slimpro-hwmon" + - mboxes : use the label reference for the mailbox as the first parameter. + The second parameter is the channel number. + +Example : + hwmonslimpro { + compatible = "apm,xgene-slimpro-hwmon"; + mboxes = <&mailbox 7>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/as370.txt b/Documentation/devicetree/bindings/hwmon/as370.txt new file mode 100644 index 000000000..d102fe765 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/as370.txt @@ -0,0 +1,11 @@ +Bindings for Synaptics AS370 PVT sensors + +Required properties: +- compatible : "syna,as370-hwmon" +- reg : address and length of the register set. + +Example: + hwmon@ea0810 { + compatible = "syna,as370-hwmon"; + reg = <0xea0810 0xc>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt new file mode 100644 index 000000000..3ac02988a --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt @@ -0,0 +1,73 @@ +ASPEED AST2400/AST2500 PWM and Fan Tacho controller device driver + +The ASPEED PWM controller can support upto 8 PWM outputs. The ASPEED Fan Tacho +controller can support upto 16 Fan tachometer inputs. + +There can be upto 8 fans supported. Each fan can have one PWM output and +one/two Fan tach inputs. + +Required properties for pwm-tacho node: +- #address-cells : should be 1. + +- #size-cells : should be 1. + +- #cooling-cells: should be 2. + +- reg : address and length of the register set for the device. + +- pinctrl-names : a pinctrl state named "default" must be defined. + +- pinctrl-0 : phandle referencing pin configuration of the PWM ports. + +- compatible : should be "aspeed,ast2400-pwm-tacho" for AST2400 and + "aspeed,ast2500-pwm-tacho" for AST2500. + +- clocks : phandle to clock provider with the clock number in the second cell + +- resets : phandle to reset controller with the reset number in the second cell + +fan subnode format: +=================== +Under fan subnode there can upto 8 child nodes, with each child node +representing a fan. If there are 8 fans each fan can have one PWM port and +one/two Fan tach inputs. +For PWM port can be configured cooling-levels to create cooling device. +Cooling device could be bound to a thermal zone for the thermal control. + +Required properties for each child node: +- reg : should specify PWM source port. + integer value in the range 0 to 7 with 0 indicating PWM port A and + 7 indicating PWM port H. + +- cooling-levels: PWM duty cycle values in a range from 0 to 255 + which correspond to thermal cooling states. + +- aspeed,fan-tach-ch : should specify the Fan tach input channel. + integer value in the range 0 through 15, with 0 indicating + Fan tach channel 0 and 15 indicating Fan tach channel 15. + Atleast one Fan tach input channel is required. + +Examples: + +pwm_tacho: pwmtachocontroller@1e786000 { + #address-cells = <1>; + #size-cells = <1>; + #cooling-cells = <2>; + reg = <0x1E786000 0x1000>; + compatible = "aspeed,ast2500-pwm-tacho"; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_PWM>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>; + + fan@0 { + reg = <0x00>; + cooling-levels = /bits/ 8 <125 151 177 203 229 255>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01 0x02>; + }; +}; diff --git a/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml new file mode 100644 index 000000000..00a651135 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/baikal,bt1-pvt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Baikal-T1 PVT Sensor + +maintainers: + - Serge Semin <fancer.lancer@gmail.com> + +description: | + Baikal-T1 SoC provides an embedded process, voltage and temperature + sensor to monitor an internal SoC environment (chip temperature, supply + voltage and process monitor) and on time detect critical situations, + which may cause the system instability and even damages. The IP-block + is based on the Analog Bits PVT sensor, but is equipped with a dedicated + control wrapper, which provides a MMIO registers-based access to the + sensor core functionality (APB3-bus based) and exposes an additional + functions like thresholds/data ready interrupts, its status and masks, + measurements timeout. Its internal structure is depicted on the next + diagram: + + Analog Bits core Bakal-T1 PVT control block + +--------------------+ +------------------------+ + | Temperature sensor |-+ +------| Sensors control | + |--------------------| |<---En---| |------------------------| + | Voltage sensor |-|<--Mode--| +--->| Sampled data | + |--------------------| |<--Trim--+ | |------------------------| + | Low-Vt sensor |-| | +--| Thresholds comparator | + |--------------------| |---Data----| | |------------------------| + | High-Vt sensor |-| | +->| Interrupts status | + |--------------------| |--Valid--+-+ | |------------------------| + | Standard-Vt sensor |-+ +---+--| Interrupts mask | + +--------------------+ |------------------------| + ^ | Interrupts timeout | + | +------------------------+ + | ^ ^ + Rclk-----+----------------------------------------+ | + APB3-------------------------------------------------+ + + This bindings describes the external Baikal-T1 PVT control interfaces + like MMIO registers space, interrupt request number and clocks source. + These are then used by the corresponding hwmon device driver to + implement the sysfs files-based access to the sensors functionality. + +properties: + compatible: + const: baikal,bt1-pvt + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: PVT reference clock + - description: APB3 interface clock + + clock-names: + items: + - const: ref + - const: pclk + + "#thermal-sensor-cells": + description: Baikal-T1 can be referenced as the CPU thermal-sensor + const: 0 + + baikal,pvt-temp-offset-millicelsius: + description: | + Temperature sensor trimming factor. It can be used to manually adjust the + temperature measurements within 7.130 degrees Celsius. + maxItems: 1 + items: + default: 0 + minimum: 0 + maximum: 7130 + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/interrupt-controller/mips-gic.h> + + pvt@1f200000 { + compatible = "baikal,bt1-pvt"; + reg = <0x1f200000 0x1000>; + #thermal-sensor-cells = <0>; + + interrupts = <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>; + + baikal,pvt-temp-offset-millicelsius = <1000>; + + clocks = <&ccu_sys>, <&ccu_sys>; + clock-names = "ref", "pclk"; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.yaml new file mode 100644 index 000000000..cc00b97a7 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/cirrus,lochnagar.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic Lochnagar Audio Development Board + +maintainers: + - patches@opensource.cirrus.com + +description: | + Lochnagar is an evaluation and development board for Cirrus Logic + Smart CODEC and Amp devices. It allows the connection of most Cirrus + Logic devices on mini-cards, as well as allowing connection of various + application processor systems to provide a full evaluation platform. + Audio system topology, clocking and power can all be controlled through + the Lochnagar, allowing the device under test to be used in a variety of + possible use cases. + + This binding document describes the binding for the hardware monitor + portion of the driver. + + This binding must be part of the Lochnagar MFD binding: + [1] ../mfd/cirrus,lochnagar.yaml + +properties: + compatible: + enum: + - cirrus,lochnagar2-hwmon + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/hwmon/dps650ab.txt b/Documentation/devicetree/bindings/hwmon/dps650ab.txt new file mode 100644 index 000000000..76780e795 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/dps650ab.txt @@ -0,0 +1,11 @@ +Bindings for Delta Electronics DPS-650-AB power supply + +Required properties: +- compatible : "delta,dps650ab" +- reg : I2C address, one of 0x58, 0x59. + +Example: + dps650ab@58 { + compatible = "delta,dps650ab"; + reg = <0x58>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/g762.txt b/Documentation/devicetree/bindings/hwmon/g762.txt new file mode 100644 index 000000000..6d154c492 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/g762.txt @@ -0,0 +1,47 @@ +GMT G762/G763 PWM Fan controller + +Required node properties: + + - "compatible": must be either "gmt,g762" or "gmt,g763" + - "reg": I2C bus address of the device + - "clocks": a fixed clock providing input clock frequency + on CLK pin of the chip. + +Optional properties: + + - "fan_startv": fan startup voltage. Accepted values are 0, 1, 2 and 3. + The higher the more. + + - "pwm_polarity": pwm polarity. Accepted values are 0 (positive duty) + and 1 (negative duty). + + - "fan_gear_mode": fan gear mode. Supported values are 0, 1 and 2. + +If an optional property is not set in .dts file, then current value is kept +unmodified (e.g. u-boot installed value). + +Additional information on operational parameters for the device is available +in Documentation/hwmon/g762.rst. A detailed datasheet for the device is available +at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf. + +Example g762 node: + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + g762_clk: fixedclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <8192>; + } + } + + g762: g762@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk> + fan_gear_mode = <0>; /* chip default */ + fan_startv = <1>; /* chip default */ + pwm_polarity = <0>; /* chip default */ + }; diff --git a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt new file mode 100644 index 000000000..f4cfa350f --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt @@ -0,0 +1,41 @@ +Bindings for fan connected to GPIO lines + +Required properties: +- compatible : "gpio-fan" + +Optional properties: +- gpios: Specifies the pins that map to bits in the control value, + ordered MSB-->LSB. +- gpio-fan,speed-map: A mapping of possible fan RPM speeds and the + control value that should be set to achieve them. This array + must have the RPM values in ascending order. +- alarm-gpios: This pin going active indicates something is wrong with + the fan, and a udev event will be fired. +- #cooling-cells: If used as a cooling device, must be <2> + Also see: + Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml + min and max states are derived from the speed-map of the fan. + +Note: At least one the "gpios" or "alarm-gpios" properties must be set. + +Examples: + + gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio1 14 1 + &gpio1 13 1>; + gpio-fan,speed-map = <0 0 + 3000 1 + 6000 2>; + alarm-gpios = <&gpio1 15 1>; + }; + gpio_fan_cool: gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio2 14 1 + &gpio2 13 1>; + gpio-fan,speed-map = <0 0>, + <3000 1>, + <6000 2>; + alarm-gpios = <&gpio2 15 1>; + #cooling-cells = <2>; /* min followed by max */ + }; diff --git a/Documentation/devicetree/bindings/hwmon/hih6130.txt b/Documentation/devicetree/bindings/hwmon/hih6130.txt new file mode 100644 index 000000000..2c43837af --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/hih6130.txt @@ -0,0 +1,12 @@ +Honeywell Humidicon HIH-6130 humidity/temperature sensor +-------------------------------------------------------- + +Requires node properties: +- compatible : "honeywell,hi6130" +- reg : the I2C address of the device. This is 0x27. + +Example: + hih6130@27 { + compatible = "honeywell,hih6130"; + reg = <0x27>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt b/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt new file mode 100644 index 000000000..d9a2719f9 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt @@ -0,0 +1,26 @@ +Device-tree bindings for IBM Common Form Factor Power Supply Versions 1 and 2 +----------------------------------------------------------------------------- + +Required properties: + - compatible : Must be one of the following: + "ibm,cffps1" + "ibm,cffps2" + or "ibm,cffps" if the system + must support any version of the + power supply + - reg = < I2C bus address >; : Address of the power supply on the + I2C bus. + +Example: + + i2c-bus@100 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + < more properties > + + power-supply@68 { + compatible = "ibm,cffps1"; + reg = <0x68>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt b/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt new file mode 100644 index 000000000..f93242be6 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt @@ -0,0 +1,23 @@ +IBM POWERNV platform sensors +---------------------------- + +Required node properties: +- compatible: must be one of + "ibm,opal-sensor-cooling-fan" + "ibm,opal-sensor-amb-temp" + "ibm,opal-sensor-power-supply" + "ibm,opal-sensor-power" +- sensor-id: an opaque id provided by the firmware to the kernel, identifies a + given sensor and its attribute data + +Example sensors node: + +cooling-fan#8-data { + sensor-id = <0x7052107>; + compatible = "ibm,opal-sensor-cooling-fan"; +}; + +amb-temp#1-thrs { + sensor-id = <0x5096000>; + compatible = "ibm,opal-sensor-amb-temp"; +}; diff --git a/Documentation/devicetree/bindings/hwmon/ina2xx.txt b/Documentation/devicetree/bindings/hwmon/ina2xx.txt new file mode 100644 index 000000000..02af0d94e --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ina2xx.txt @@ -0,0 +1,24 @@ +ina2xx properties + +Required properties: +- compatible: Must be one of the following: + - "ti,ina209" for ina209 + - "ti,ina219" for ina219 + - "ti,ina220" for ina220 + - "ti,ina226" for ina226 + - "ti,ina230" for ina230 + - "ti,ina231" for ina231 +- reg: I2C address + +Optional properties: + +- shunt-resistor + Shunt resistor value in micro-Ohm + +Example: + +ina220@44 { + compatible = "ti,ina220"; + reg = <0x44>; + shunt-resistor = <1000>; +}; diff --git a/Documentation/devicetree/bindings/hwmon/ina3221.txt b/Documentation/devicetree/bindings/hwmon/ina3221.txt new file mode 100644 index 000000000..fa63b6171 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ina3221.txt @@ -0,0 +1,54 @@ +Texas Instruments INA3221 Device Tree Bindings + +1) ina3221 node + Required properties: + - compatible: Must be "ti,ina3221" + - reg: I2C address + + Optional properties: + - ti,single-shot: This chip has two power modes: single-shot (chip takes one + measurement and then shuts itself down) and continuous ( + chip takes continuous measurements). The continuous mode is + more reliable and suitable for hardware monitor type device, + but the single-shot mode is more power-friendly and useful + for battery-powered device which cares power consumptions + while still needs some measurements occasionally. + If this property is present, the single-shot mode will be + used, instead of the default continuous one for monitoring. + + = The node contains optional child nodes for three channels = + = Each child node describes the information of input source = + + - #address-cells: Required only if a child node is present. Must be 1. + - #size-cells: Required only if a child node is present. Must be 0. + +2) child nodes + Required properties: + - reg: Must be 0, 1 or 2, corresponding to IN1, IN2 or IN3 port of INA3221 + + Optional properties: + - label: Name of the input source + - shunt-resistor-micro-ohms: Shunt resistor value in micro-Ohm + +Example: + +ina3221@40 { + compatible = "ti,ina3221"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + input@0 { + reg = <0x0>; + status = "disabled"; + }; + input@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <5000>; + }; + input@2 { + reg = <0x2>; + label = "VDD_5V"; + shunt-resistor-micro-ohms = <5000>; + }; +}; diff --git a/Documentation/devicetree/bindings/hwmon/jc42.txt b/Documentation/devicetree/bindings/hwmon/jc42.txt new file mode 100644 index 000000000..f569db58f --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/jc42.txt @@ -0,0 +1,46 @@ +Properties for Jedec JC-42.4 compatible temperature sensors + +Required properties: +- compatible: May include a device-specific string consisting of the + manufacturer and the name of the chip. A list of supported + chip names follows. + Must include "jedec,jc-42.4-temp" for any Jedec JC-42.4 + compatible temperature sensor. + + Supported chip names: + adi,adt7408 + atmel,at30ts00 + atmel,at30tse004 + onnn,cat6095 + onnn,cat34ts02 + maxim,max6604 + microchip,mcp9804 + microchip,mcp9805 + microchip,mcp9808 + microchip,mcp98243 + microchip,mcp98244 + microchip,mcp9843 + nxp,se97 + nxp,se98 + st,stts2002 + st,stts2004 + st,stts3000 + st,stts424 + st,stts424e + idt,tse2002 + idt,tse2004 + idt,ts3000 + idt,ts3001 + +- reg: I2C address + +Optional properties: +- smbus-timeout-disable: When set, the smbus timeout function will be disabled. + This is not supported on all chips. + +Example: + +temp-sensor@1a { + compatible = "jedec,jc-42.4-temp"; + reg = <0x1a>; +}; diff --git a/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml new file mode 100644 index 000000000..010333cb2 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/kontron,sl28cpld-hwmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hardware monitoring driver for the sl28cpld board management controller + +maintainers: + - Michael Walle <michael@walle.cc> + +description: | + This module is part of the sl28cpld multi-function device. For more + details see ../mfd/kontron,sl28cpld.yaml. + +properties: + compatible: + enum: + - kontron,sl28cpld-fan + + reg: + maxItems: 1 + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/hwmon/lm70.txt b/Documentation/devicetree/bindings/hwmon/lm70.txt new file mode 100644 index 000000000..ea417a0d3 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/lm70.txt @@ -0,0 +1,22 @@ +* LM70/TMP121/LM71/LM74 thermometer. + +Required properties: +- compatible: one of + "ti,lm70" + "ti,tmp121" + "ti,tmp122" + "ti,lm71" + "ti,lm74" + +See Documentation/devicetree/bindings/spi/spi-bus.txt for more required and +optional properties. + +Example: + +spi_master { + temperature-sensor@0 { + compatible = "ti,lm70"; + reg = <0>; + spi-max-frequency = <1000000>; + }; +}; diff --git a/Documentation/devicetree/bindings/hwmon/lm75.yaml b/Documentation/devicetree/bindings/hwmon/lm75.yaml new file mode 100644 index 000000000..96eed5cc7 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/lm75.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/lm75.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LM75 hwmon sensor + +maintainers: + - Jean Delvare <jdelvare@suse.com> + - Guenter Roeck <linux@roeck-us.net> + +properties: + compatible: + enum: + - adi,adt75 + - dallas,ds1775 + - dallas,ds75 + - dallas,ds7505 + - gmt,g751 + - national,lm75 + - national,lm75a + - national,lm75b + - maxim,max6625 + - maxim,max6626 + - maxim,max31725 + - maxim,max31726 + - maxim,mcp980x + - nxp,pct2075 + - st,stds75 + - st,stlm75 + - microchip,tcn75 + - ti,tmp100 + - ti,tmp101 + - ti,tmp105 + - ti,tmp112 + - ti,tmp175 + - ti,tmp275 + - ti,tmp75 + - ti,tmp75b + - ti,tmp75c + + reg: + maxItems: 1 + + vs-supply: + description: phandle to the regulator that provides the +VS supply + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@48 { + compatible = "st,stlm75"; + reg = <0x48>; + vs-supply = <&vs>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/lm87.txt b/Documentation/devicetree/bindings/hwmon/lm87.txt new file mode 100644 index 000000000..e1b79903f --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/lm87.txt @@ -0,0 +1,30 @@ +*LM87 hwmon sensor. + +Required properties: +- compatible: Should be + "ti,lm87" + +- reg: I2C address + +optional properties: +- has-temp3: This configures pins 18 and 19 to be used as a second + remote temperature sensing channel. By default the pins + are configured as voltage input pins in0 and in5. + +- has-in6: When set, pin 5 is configured to be used as voltage input + in6. Otherwise the pin is set as FAN1 input. + +- has-in7: When set, pin 6 is configured to be used as voltage input + in7. Otherwise the pin is set as FAN2 input. + +- vcc-supply: a Phandle for the regulator supplying power, can be + cofigured to measure 5.0V power supply. Default is 3.3V. + +Example: + +lm87@2e { + compatible = "ti,lm87"; + reg = <0x2e>; + has-temp3; + vcc-supply = <®_5v0>; +}; diff --git a/Documentation/devicetree/bindings/hwmon/lm90.txt b/Documentation/devicetree/bindings/hwmon/lm90.txt new file mode 100644 index 000000000..398dcb965 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/lm90.txt @@ -0,0 +1,51 @@ +* LM90 series thermometer. + +Required node properties: +- compatible: manufacturer and chip name, one of + "adi,adm1032" + "adi,adt7461" + "adi,adt7461a" + "gmt,g781" + "national,lm90" + "national,lm86" + "national,lm89" + "national,lm99" + "dallas,max6646" + "dallas,max6647" + "dallas,max6649" + "dallas,max6657" + "dallas,max6658" + "dallas,max6659" + "dallas,max6680" + "dallas,max6681" + "dallas,max6695" + "dallas,max6696" + "onnn,nct1008" + "winbond,w83l771" + "nxp,sa56004" + "ti,tmp451" + +- reg: I2C bus address of the device + +- vcc-supply: vcc regulator for the supply voltage. + +Optional properties: +- interrupts: Contains a single interrupt specifier which describes the + LM90 "-ALERT" pin output. + See interrupt-controller/interrupts.txt for the format. + +- #thermal-sensor-cells: should be set to 1. See thermal/thermal-sensor.yaml + for details. See <include/dt-bindings/thermal/lm90.h> for the + definition of the local, remote and 2nd remote sensor index + constants. + +Example LM90 node: + +temp-sensor { + compatible = "onnn,nct1008"; + reg = <0x4c>; + vcc-supply = <&palmas_ldo6_reg>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; +} diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt new file mode 100644 index 000000000..4e7f6215a --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ltc2978.txt @@ -0,0 +1,62 @@ +ltc2978 + +Required properties: +- compatible: should contain one of: + * "lltc,ltc2972" + * "lltc,ltc2974" + * "lltc,ltc2975" + * "lltc,ltc2977" + * "lltc,ltc2978" + * "lltc,ltc2979" + * "lltc,ltc2980" + * "lltc,ltc3880" + * "lltc,ltc3882" + * "lltc,ltc3883" + * "lltc,ltc3884" + * "lltc,ltc3886" + * "lltc,ltc3887" + * "lltc,ltc3889" + * "lltc,ltc7880" + * "lltc,ltm2987" + * "lltc,ltm4664" + * "lltc,ltm4675" + * "lltc,ltm4676" + * "lltc,ltm4677" + * "lltc,ltm4678" + * "lltc,ltm4680" + * "lltc,ltm4686" + * "lltc,ltm4700" +- reg: I2C slave address + +Optional properties: +- regulators: A node that houses a sub-node for each regulator controlled by + the device. Each sub-node is identified using the node's name, with valid + values listed below. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + +Valid names of regulators depend on number of supplies supported per device: + * ltc2972 vout0 - vout1 + * ltc2974, ltc2975 : vout0 - vout3 + * ltc2977, ltc2979, ltc2980, ltm2987 : vout0 - vout7 + * ltc2978 : vout0 - vout7 + * ltc3880, ltc3882, ltc3884, ltc3886, ltc3887, ltc3889 : vout0 - vout1 + * ltc7880 : vout0 - vout1 + * ltc3883 : vout0 + * ltm4664 : vout0 - vout1 + * ltm4675, ltm4676, ltm4677, ltm4678 : vout0 - vout1 + * ltm4680, ltm4686 : vout0 - vout1 + * ltm4700 : vout0 - vout1 + +Example: +ltc2978@5e { + compatible = "lltc,ltc2978"; + reg = <0x5e>; + regulators { + vout0 { + regulator-name = "FPGA-2.5V"; + }; + vout2 { + regulator-name = "FPGA-1.5V"; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/hwmon/ltc2990.txt b/Documentation/devicetree/bindings/hwmon/ltc2990.txt new file mode 100644 index 000000000..f92f54029 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ltc2990.txt @@ -0,0 +1,36 @@ +ltc2990: Linear Technology LTC2990 power monitor + +Required properties: +- compatible: Must be "lltc,ltc2990" +- reg: I2C slave address +- lltc,meas-mode: + An array of two integers for configuring the chip measurement mode. + + The first integer defines the bits 2..0 in the control register. In all + cases the internal temperature and supply voltage are measured. In + addition the following input measurements are enabled per mode: + + 0: V1, V2, TR2 + 1: V1-V2, TR2 + 2: V1-V2, V3, V4 + 3: TR1, V3, V4 + 4: TR1, V3-V4 + 5: TR1, TR2 + 6: V1-V2, V3-V4 + 7: V1, V2, V3, V4 + + The second integer defines the bits 4..3 in the control register. This + allows a subset of the measurements to be enabled: + + 0: Internal temperature and supply voltage only + 1: TR1, V1 or V1-V2 only per mode + 2: TR2, V3 or V3-V4 only per mode + 3: All measurements per mode + +Example: + +ltc2990@4c { + compatible = "lltc,ltc2990"; + reg = <0x4c>; + lltc,meas-mode = <7 3>; /* V1, V2, V3, V4 */ +}; diff --git a/Documentation/devicetree/bindings/hwmon/ltc4151.txt b/Documentation/devicetree/bindings/hwmon/ltc4151.txt new file mode 100644 index 000000000..d008a5ef5 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ltc4151.txt @@ -0,0 +1,18 @@ +LTC4151 High Voltage I2C Current and Voltage Monitor + +Required properties: +- compatible: Must be "lltc,ltc4151" +- reg: I2C address + +Optional properties: +- shunt-resistor-micro-ohms + Shunt resistor value in micro-Ohms + Defaults to <1000> if unset. + +Example: + +ltc4151@6e { + compatible = "lltc,ltc4151"; + reg = <0x6e>; + shunt-resistor-micro-ohms = <1500>; +}; diff --git a/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt b/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt new file mode 100644 index 000000000..33fd00a98 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt @@ -0,0 +1,10 @@ +Lantiq cpu temperatur sensor + +Requires node properties: +- compatible value : + "lantiq,cputemp" + +Example: + cputemp@0 { + compatible = "lantiq,cputemp"; + }; diff --git a/Documentation/devicetree/bindings/hwmon/max1619.txt b/Documentation/devicetree/bindings/hwmon/max1619.txt new file mode 100644 index 000000000..c70dbbe1e --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/max1619.txt @@ -0,0 +1,12 @@ +Bindings for MAX1619 Temperature Sensor + +Required properties: +- compatible : "maxim,max1619" +- reg : I2C address, one of 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, or + 0x4d, 0x4e + +Example: + temp@4c { + compatible = "maxim,max1619"; + reg = <0x4c>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/max31785.txt b/Documentation/devicetree/bindings/hwmon/max31785.txt new file mode 100644 index 000000000..106e08c56 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/max31785.txt @@ -0,0 +1,22 @@ +Bindings for the Maxim MAX31785 Intelligent Fan Controller +========================================================== + +Reference: + +https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf + +The Maxim MAX31785 is a PMBus device providing closed-loop, multi-channel fan +management with temperature and remote voltage sensing. Various fan control +features are provided, including PWM frequency control, temperature hysteresis, +dual tachometer measurements, and fan health monitoring. + +Required properties: +- compatible : One of "maxim,max31785" or "maxim,max31785a" +- reg : I2C address, one of 0x52, 0x53, 0x54, 0x55. + +Example: + + fans@52 { + compatible = "maxim,max31785"; + reg = <0x52>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/max6650.txt b/Documentation/devicetree/bindings/hwmon/max6650.txt new file mode 100644 index 000000000..f6bd87d8e --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/max6650.txt @@ -0,0 +1,28 @@ +Bindings for MAX6651 and MAX6650 I2C fan controllers + +Reference: +[1] https://datasheets.maximintegrated.com/en/ds/MAX6650-MAX6651.pdf + +Required properties: +- compatible : One of "maxim,max6650" or "maxim,max6651" +- reg : I2C address, one of 0x1b, 0x1f, 0x4b, 0x48. + +Optional properties, default is to retain the chip's current setting: +- maxim,fan-microvolt : The supply voltage of the fan, either 5000000 uV or + 12000000 uV. +- maxim,fan-prescale : Pre-scaling value, as per datasheet [1]. Lower values + allow more fine-grained control of slower fans. + Valid: 1, 2, 4, 8, 16. +- maxim,fan-target-rpm: Initial requested fan rotation speed. If specified, the + driver selects closed-loop mode and the requested speed. + This ensures the fan is already running before userspace + takes over. + +Example: + fan-max6650: max6650@1b { + reg = <0x1b>; + compatible = "maxim,max6650"; + maxim,fan-microvolt = <12000000>; + maxim,fan-prescale = <4>; + maxim,fan-target-rpm = <1200>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/max6697.txt b/Documentation/devicetree/bindings/hwmon/max6697.txt new file mode 100644 index 000000000..5f793998e --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/max6697.txt @@ -0,0 +1,64 @@ +max6697 properties + +Required properties: +- compatible: + Should be one of + maxim,max6581 + maxim,max6602 + maxim,max6622 + maxim,max6636 + maxim,max6689 + maxim,max6693 + maxim,max6694 + maxim,max6697 + maxim,max6698 + maxim,max6699 +- reg: I2C address + +Optional properties: + +- smbus-timeout-disable + Set to disable SMBus timeout. If not specified, SMBus timeout will be + enabled. +- extended-range-enable + Only valid for MAX6581. Set to enable extended temperature range. + Extended temperature will be disabled if not specified. +- beta-compensation-enable + Only valid for MAX6693 and MX6694. Set to enable beta compensation on + remote temperature channel 1. + Beta compensation will be disabled if not specified. +- alert-mask + Alert bit mask. Alert disabled for bits set. + Select bit 0 for local temperature, bit 1..7 for remote temperatures. + If not specified, alert will be enabled for all channels. +- over-temperature-mask + Over-temperature bit mask. Over-temperature reporting disabled for + bits set. + Select bit 0 for local temperature, bit 1..7 for remote temperatures. + If not specified, over-temperature reporting will be enabled for all + channels. +- resistance-cancellation + Boolean for all chips other than MAX6581. Set to enable resistance + cancellation on remote temperature channel 1. + For MAX6581, resistance cancellation enabled for all channels if + specified as boolean, otherwise as per bit mask specified. + Only supported for remote temperatures (bit 1..7). + If not specified, resistance cancellation will be disabled for all + channels. +- transistor-ideality + For MAX6581 only. Two values; first is bit mask, second is ideality + select value as per MAX6581 data sheet. Select bit 1..7 for remote + channels. + Transistor ideality will be initialized to default (1.008) if not + specified. + +Example: + +temp-sensor@1a { + compatible = "maxim,max6697"; + reg = <0x1a>; + smbus-timeout-disable; + resistance-cancellation; + alert-mask = <0x72>; + over-temperature-mask = <0x7f>; +}; diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max20730.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max20730.yaml new file mode 100644 index 000000000..93e86e3b4 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/maxim,max20730.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/maxim,max20730.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim max20730 + +maintainers: + - Jean Delvare <jdelvare@suse.com> + - Guenter Roeck <linux@roeck-us.net> + +description: | + The MAX20730 is a fully integrated, highly efficient switching regulator + with PMBus for applications operating from 4.5V to 16V and requiring + up to 25A (max) load. This single-chip regulator provides extremely + compact, high efficiency power-delivery solutions with high-precision + output voltages and excellent transient response. + + Datasheets: + https://datasheets.maximintegrated.com/en/ds/MAX20730.pdf + https://datasheets.maximintegrated.com/en/ds/MAX20734.pdf + https://datasheets.maximintegrated.com/en/ds/MAX20743.pdf + +properties: + compatible: + enum: + - maxim,max20730 + - maxim,max20734 + - maxim,max20743 + + reg: + maxItems: 1 + + vout-voltage-divider: + description: | + If voltage divider present at vout, the voltage at voltage sensor pin + will be scaled. The properties will convert the raw reading to a more + meaningful number if voltage divider present. It has two numbers, + the first number is the output resistor, the second number is the total + resistance. Therefore, the adjusted vout is equal to + Vout = Vout * output_resistance / total resistance. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + max20730@10 { + compatible = "maxim,max20730"; + reg = <0x10>; + vout-voltage-divider = <1000 2000>; // vout would be scaled to 0.5 + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/mcp3021.txt b/Documentation/devicetree/bindings/hwmon/mcp3021.txt new file mode 100644 index 000000000..294318ba6 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/mcp3021.txt @@ -0,0 +1,21 @@ +mcp3021 properties + +Required properties: +- compatible: Must be one of the following: + - "microchip,mcp3021" for mcp3021 + - "microchip,mcp3221" for mcp3221 +- reg: I2C address + +Optional properties: + +- reference-voltage-microvolt + Reference voltage in microvolt (uV) + +Example: + +mcp3021@4d { + compatible = "microchip,mcp3021"; + reg = <0x4d>; + + reference-voltage-microvolt = <4500000>; /* 4.5 V */ +}; diff --git a/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml b/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml new file mode 100644 index 000000000..76be625d5 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/microchip,sparx5-temp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip Sparx5 Temperature Monitor + +maintainers: + - Lars Povlsen <lars.povlsen@microchip.com> + +description: | + Microchip Sparx5 embedded temperature monitor + +properties: + compatible: + enum: + - microchip,sparx5-temp + + reg: + maxItems: 1 + + clocks: + items: + - description: AHB reference clock + + '#thermal-sensor-cells': + const: 0 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + tmon0: tmon@610508110 { + compatible = "microchip,sparx5-temp"; + reg = <0x10508110 0xc>; + #thermal-sensor-cells = <0>; + clocks = <&ahb_clk>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml new file mode 100644 index 000000000..6f3e3c01f --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/moortec,mr75203.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Moortec Semiconductor MR75203 PVT Controller bindings + +maintainers: + - Rahul Tanwar <rtanwar@maxlinear.com> + +properties: + compatible: + const: moortec,mr75203 + + reg: + items: + - description: PVT common registers + - description: PVT temprature sensor registers + - description: PVT process detector registers + - description: PVT voltage monitor registers + + reg-names: + items: + - const: common + - const: ts + - const: pd + - const: vm + + intel,vm-map: + description: + PVT controller has 5 VM (voltage monitor) sensors. + vm-map defines CPU core to VM instance mapping. A + value of 0xff means that VM sensor is unused. + $ref: /schemas/types.yaml#definitions/uint8-array + maxItems: 5 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + "#thermal-sensor-cells": + const: 1 + +required: + - compatible + - reg + - reg-names + - intel,vm-map + - clocks + - resets + - "#thermal-sensor-cells" + +additionalProperties: false + +examples: + - | + pvt: pvt@e0680000 { + compatible = "moortec,mr75203"; + reg = <0xe0680000 0x80>, + <0xe0680080 0x180>, + <0xe0680200 0x200>, + <0xe0680400 0xc00>; + reg-names = "common", "ts", "pd", "vm"; + intel,vm-map = [03 01 04 ff ff]; + clocks = <&osc0>; + resets = <&rcu0 0x40 7>; + #thermal-sensor-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt new file mode 100644 index 000000000..28f43e929 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt @@ -0,0 +1,84 @@ +Nuvoton NPCM7xx PWM and Fan Tacho controller device + +The Nuvoton BMC NPCM7XX supports 8 Pulse-width modulation (PWM) +controller outputs and 16 Fan tachometer controller inputs. + +Required properties for pwm-fan node +- #address-cells : should be 1. +- #size-cells : should be 0. +- compatible : "nuvoton,npcm750-pwm-fan" for Poleg NPCM7XX. +- reg : specifies physical base address and size of the registers. +- reg-names : must contain: + * "pwm" for the PWM registers. + * "fan" for the Fan registers. +- clocks : phandle of reference clocks. +- clock-names : must contain + * "pwm" for PWM controller operating clock. + * "fan" for Fan controller operating clock. +- interrupts : contain the Fan interrupts with flags for falling edge. +- pinctrl-names : a pinctrl state named "default" must be defined. +- pinctrl-0 : phandle referencing pin configuration of the PWM and Fan + controller ports. + +fan subnode format: +=================== +Under fan subnode can be upto 8 child nodes, each child node representing a fan. +Each fan subnode must have one PWM channel and atleast one Fan tach channel. + +For PWM channel can be configured cooling-levels to create cooling device. +Cooling device could be bound to a thermal zone for the thermal control. + +Required properties for each child node: +- reg : specify the PWM output channel. + integer value in the range 0 through 7, that represent + the PWM channel number that used. + +- fan-tach-ch : specify the Fan tach input channel. + integer value in the range 0 through 15, that represent + the fan tach channel number that used. + + At least one Fan tach input channel is required + +Optional property for each child node: +- cooling-levels: PWM duty cycle values in a range from 0 to 255 + which correspond to thermal cooling states. + +Examples: + +pwm_fan:pwm-fan-controller@103000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nuvoton,npcm750-pwm-fan"; + reg = <0x103000 0x2000>, + <0x180000 0x8000>; + reg-names = "pwm", "fan"; + clocks = <&clk NPCM7XX_CLK_APB3>, + <&clk NPCM7XX_CLK_APB4>; + clock-names = "pwm","fan"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins &pwm1_pins &pwm2_pins + &fanin0_pins &fanin1_pins &fanin2_pins + &fanin3_pins &fanin4_pins>; + fan@0 { + reg = <0x00>; + fan-tach-ch = /bits/ 8 <0x00 0x01>; + cooling-levels = <127 255>; + }; + fan@1 { + reg = <0x01>; + fan-tach-ch = /bits/ 8 <0x02 0x03>; + }; + fan@2 { + reg = <0x02>; + fan-tach-ch = /bits/ 8 <0x04>; + }; + +}; diff --git a/Documentation/devicetree/bindings/hwmon/nsa320-mcu.txt b/Documentation/devicetree/bindings/hwmon/nsa320-mcu.txt new file mode 100644 index 000000000..0863e067c --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/nsa320-mcu.txt @@ -0,0 +1,20 @@ +Bindings for the fan / temperature monitor microcontroller used on +the Zyxel NSA 320 and several subsequent models. + +Required properties: +- compatible : "zyxel,nsa320-mcu" +- data-gpios : The GPIO pin connected to the data line on the MCU +- clk-gpios : The GPIO pin connected to the clock line on the MCU +- act-gpios : The GPIO pin connected to the active line on the MCU + +Example: + + hwmon { + compatible = "zyxel,nsa320-mcu"; + pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act>; + pinctrl-names = "default"; + + data-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + clk-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + act-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt new file mode 100644 index 000000000..37f18d684 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt @@ -0,0 +1,44 @@ +NTC Thermistor hwmon sensors +------------------------------- + +Requires node properties: +- "compatible" value : one of + "epcos,b57330v2103" + "epcos,b57891s0103" + "murata,ncp15wb473" + "murata,ncp18wb473" + "murata,ncp21wb473" + "murata,ncp03wb473" + "murata,ncp15wl333" + "murata,ncp03wf104" + "murata,ncp15xh103" + +/* Usage of vendor name "ntc" is deprecated */ +<DEPRECATED> "ntc,ncp15wb473" +<DEPRECATED> "ntc,ncp18wb473" +<DEPRECATED> "ntc,ncp21wb473" +<DEPRECATED> "ntc,ncp03wb473" +<DEPRECATED> "ntc,ncp15wl333" + +- "pullup-uv" Pull up voltage in micro volts +- "pullup-ohm" Pull up resistor value in ohms +- "pulldown-ohm" Pull down resistor value in ohms +- "connected-positive" Always ON, If not specified. + Status change is possible. +- "io-channels" Channel node of ADC to be used for + conversion. + +Optional node properties: +- "#thermal-sensor-cells" Used to expose itself to thermal fw. + +Read more about iio bindings at + Documentation/devicetree/bindings/iio/iio-bindings.txt + +Example: + ncp15wb473@0 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 3>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml new file mode 100644 index 000000000..e8feee38c --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/pmbus/ti,ucd90320.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UCD90320 power sequencer + +maintainers: + - Jim Wright <wrightj@linux.vnet.ibm.com> + +description: | + The UCD90320 is a 32-rail PMBus/I2C addressable power-supply sequencer and + monitor. The 24 integrated ADC channels (AMONx) monitor the power supply + voltage, current, and temperature. Of the 84 GPIO pins, 8 can be used as + digital monitors (DMONx), 32 to enable the power supply (ENx), 24 for + margining (MARx), 16 for logical GPO, and 32 GPIs for cascading, and system + function. + + http://focus.ti.com/lit/ds/symlink/ucd90320.pdf + +properties: + compatible: + enum: + - ti,ucd90320 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ucd90320@11 { + compatible = "ti,ucd90320"; + reg = <0x11>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt new file mode 100644 index 000000000..41b767629 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt @@ -0,0 +1,57 @@ +Bindings for a fan connected to the PWM lines + +Required properties: +- compatible : "pwm-fan" +- pwms : the PWM that is used to control the PWM fan +- cooling-levels : PWM duty cycle values in a range from 0 to 255 + which correspond to thermal cooling states + +Optional properties: +- fan-supply : phandle to the regulator that provides power to the fan +- interrupts : This contains a single interrupt specifier which + describes the tachometer output of the fan as an + interrupt source. The output signal must generate a + defined number of interrupts per fan revolution, which + require that it must be self resetting edge interrupts. + See interrupt-controller/interrupts.txt for the format. +- pulses-per-revolution : define the tachometer pulses per fan revolution as + an integer (default is 2 interrupts per revolution). + The value must be greater than zero. + +Example: + fan0: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + pwms = <&pwm 0 10000 0>; + cooling-levels = <0 102 170 230>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + thermal-sensors = <&tmu 0>; + polling-delay-passive = <0>; + polling-delay = <0>; + trips { + cpu_alert1: cpu-alert1 { + temperature = <100000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu_alert1>; + cooling-device = <&fan0 0 1>; + }; + }; + }; + +Example 2: + fan0: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm 0 40000 0>; + fan-supply = <®_fan>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + pulses-per-revolution = <2>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml new file mode 100644 index 000000000..c523a1beb --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/sensirion,shtc1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sensirion SHTC1 Humidity and Temperature Sensor IC + +maintainers: + - Christopher Ruehl chris.ruehl@gtsys.com.hk + +description: | + The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensor + designed especially for battery-driven high-volume consumer electronics + applications. + For further information refere to Documentation/hwmon/shtc1.rst + + This binding document describes the binding for the hardware monitor + portion of the driver. + +properties: + compatible: + enum: + - sensirion,shtc1 + - sensirion,shtw1 + - sensirion,shtc3 + + reg: + const: 0x70 + + sensirion,blocking-io: + $ref: /schemas/types.yaml#definitions/flag + description: + If set, the driver hold the i2c bus until measurement is finished. + + sensirion,low-precision: + $ref: /schemas/types.yaml#definitions/flag + description: + If set, the sensor aquire data with low precision (not recommended). + The driver aquire data with high precision by default. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + + shtc3@70 { + compatible = "sensirion,shtc3"; + reg = <0x70>; + sensirion,blocking-io; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/sht15.txt b/Documentation/devicetree/bindings/hwmon/sht15.txt new file mode 100644 index 000000000..6a80277cc --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/sht15.txt @@ -0,0 +1,19 @@ +Sensirion SHT15 Humidity and Temperature Sensor + +Required properties: + + - "compatible": must be "sensirion,sht15". + - "data-gpios": GPIO connected to the data line. + - "clk-gpios": GPIO connected to the clock line. + - "vcc-supply": regulator that drives the VCC pin. + +Example: + + sensor { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sensor>; + compatible = "sensirion,sht15"; + clk-gpios = <&gpio4 12 0>; + data-gpios = <&gpio4 13 0>; + vcc-supply = <®_sht15>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/stts751.txt b/Documentation/devicetree/bindings/hwmon/stts751.txt new file mode 100644 index 000000000..3ee1dc30e --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/stts751.txt @@ -0,0 +1,15 @@ +* STTS751 thermometer. + +Required node properties: +- compatible: "stts751" +- reg: I2C bus address of the device + +Optional properties: +- smbus-timeout-disable: when set, the smbus timeout function will be disabled + +Example stts751 node: + +temp-sensor { + compatible = "stts751"; + reg = <0x48>; +} diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml new file mode 100644 index 000000000..c17e5d3ee --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/ti,tmp513.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TMP513/512 system monitor sensor + +maintainers: + - Eric Tremblay <etremblay@distech-controls.com> + +description: | + The TMP512 (dual-channel) and TMP513 (triple-channel) are system monitors + that include remote sensors, a local temperature sensor, and a high-side + current shunt monitor. These system monitors have the capability of measuring + remote temperatures, on-chip temperatures, and system voltage/power/current + consumption. + + Datasheets: + https://www.ti.com/lit/gpn/tmp513 + https://www.ti.com/lit/gpn/tmp512 + + +properties: + compatible: + enum: + - ti,tmp512 + - ti,tmp513 + + reg: + maxItems: 1 + + shunt-resistor-micro-ohms: + description: | + If 0, the calibration process will be skiped and the current and power + measurement engine will not work. Temperature and voltage measurement + will continue to work. The shunt value also need to respect: + rshunt <= pga-gain * 40 * 1000 * 1000. + If not, it's not possible to compute a valid calibration value. + default: 1000 + + ti,pga-gain: + description: | + The gain value for the PGA function. This is 8, 4, 2 or 1. + The PGA gain affect the shunt voltage range. + The range will be equal to: pga-gain * 40mV + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8] + default: 8 + + ti,bus-range-microvolt: + description: | + This is the operating range of the bus voltage in microvolt + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [16000000, 32000000] + default: 32000000 + + ti,nfactor: + description: | + Array of three(TMP513) or two(TMP512) n-Factor value for each remote + temperature channel. + See datasheet Table 11 for n-Factor range list and value interpretation. + $ref: /schemas/types.yaml#definitions/uint32-array + minItems: 2 + maxItems: 3 + items: + default: 0x00 + minimum: 0x00 + maximum: 0xFF + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tmp513@5c { + compatible = "ti,tmp513"; + reg = <0x5C>; + shunt-resistor-micro-ohms = <330000>; + ti,bus-range-microvolt = <32000000>; + ti,pga-gain = <8>; + ti,nfactor = <0x1 0xF3 0x00>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/tmp108.txt b/Documentation/devicetree/bindings/hwmon/tmp108.txt new file mode 100644 index 000000000..54d4beed4 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/tmp108.txt @@ -0,0 +1,18 @@ +TMP108 temperature sensor +------------------------- + +This device supports I2C only. + +Requires node properties: +- compatible : "ti,tmp108" +- reg : the I2C address of the device. This is 0x48, 0x49, 0x4a, or 0x4b. + +Optional properties: +- interrupts: Reference to the TMP108 alert interrupt. +- #thermal-sensor-cells: should be set to 0. + +Example: + tmp108@48 { + compatible = "ti,tmp108"; + reg = <0x48>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/vexpress.txt b/Documentation/devicetree/bindings/hwmon/vexpress.txt new file mode 100644 index 000000000..9c27ed694 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/vexpress.txt @@ -0,0 +1,23 @@ +Versatile Express hwmon sensors +------------------------------- + +Requires node properties: +- "compatible" value : one of + "arm,vexpress-volt" + "arm,vexpress-amp" + "arm,vexpress-temp" + "arm,vexpress-power" + "arm,vexpress-energy" +- "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg + (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt + for more details) + +Optional node properties: +- label : string describing the monitored value + +Example: + energy@0 { + compatible = "arm,vexpress-energy"; + arm,vexpress-sysreg,func = <13 0>; + label = "A15 Jcore"; + }; |