1 files changed, 58 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt
new file mode 100644
index 000000000..0bfb3ba55
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt
@@ -0,0 +1,58 @@
+* NXP LPC32xx MIC, SIC1 and SIC2 Interrupt Controllers
+
+Required properties:
+- compatible: "nxp,lpc3220-mic" or "nxp,lpc3220-sic".
+- reg: should contain IC registers location and length.
+- interrupt-controller: identifies the node as an interrupt controller.
+- #interrupt-cells: the number of cells to define an interrupt, should be 2.
+  The first cell is the IRQ number, the second cell is used to specify
+  one of the supported IRQ types:
+      IRQ_TYPE_EDGE_RISING = low-to-high edge triggered,
+      IRQ_TYPE_EDGE_FALLING = high-to-low edge triggered,
+      IRQ_TYPE_LEVEL_HIGH = active high level-sensitive,
+      IRQ_TYPE_LEVEL_LOW = active low level-sensitive.
+  Reset value is IRQ_TYPE_LEVEL_LOW.
+
+Optional properties:
+- interrupts: empty for MIC interrupt controller, cascaded MIC
+  hardware interrupts for SIC1 and SIC2
+
+Examples:
+
+	/* LPC32xx MIC, SIC1 and SIC2 interrupt controllers */
+	mic: interrupt-controller@40008000 {
+		compatible = "nxp,lpc3220-mic";
+		reg = <0x40008000 0x4000>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sic1: interrupt-controller@4000c000 {
+		compatible = "nxp,lpc3220-sic";
+		reg = <0x4000c000 0x4000>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupt-parent = <&mic>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>,
+			     <30 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	sic2: interrupt-controller@40010000 {
+		compatible = "nxp,lpc3220-sic";
+		reg = <0x40010000 0x4000>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupt-parent = <&mic>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>,
+			     <31 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	/* ADC */
+	adc@40048000 {
+		compatible = "nxp,lpc3220-adc";
+		reg = <0x40048000 0x1000>;
+		interrupt-parent = <&sic1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+	};