1 files changed, 77 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
new file mode 100644
index 000000000..e37230369
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
@@ -0,0 +1,77 @@
+Texas Instruments - tlv320aic31xx Codec module
+
+The tlv320aic31xx serial control bus communicates through I2C protocols
+
+Required properties:
+
+- compatible - "string" - One of:
+    "ti,tlv320aic310x" - Generic TLV320AIC31xx with mono speaker amp
+    "ti,tlv320aic311x" - Generic TLV320AIC31xx with stereo speaker amp
+    "ti,tlv320aic3100" - TLV320AIC3100 (mono speaker amp, no MiniDSP)
+    "ti,tlv320aic3110" - TLV320AIC3110 (stereo speaker amp, no MiniDSP)
+    "ti,tlv320aic3120" - TLV320AIC3120 (mono speaker amp, MiniDSP)
+    "ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP)
+    "ti,tlv320dac3100" - TLV320DAC3100 (no ADC, mono speaker amp, no MiniDSP)
+    "ti,tlv320dac3101" - TLV320DAC3101 (no ADC, stereo speaker amp, no MiniDSP)
+
+- reg - <int> -  I2C slave address
+- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
+  DVDD-supply : power supplies for the device as covered in
+  Documentation/devicetree/bindings/regulator/regulator.txt
+
+
+Optional properties:
+
+- reset-gpios - GPIO specification for the active low RESET input.
+- ai31xx-micbias-vg - MicBias Voltage setting
+        1 or MICBIAS_2_0V - MICBIAS output is powered to 2.0V
+        2 or MICBIAS_2_5V - MICBIAS output is powered to 2.5V
+        3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD
+	If this node is not mentioned or if the value is unknown, then
+	micbias	is set to 2.0V.
+- ai31xx-ocmv - output common-mode voltage setting
+        0 - 1.35V,
+        1 - 1.5V,
+        2 - 1.65V,
+        3 - 1.8V
+
+Deprecated properties:
+
+- gpio-reset - gpio pin number used for codec reset
+
+CODEC output pins:
+  * HPL
+  * HPR
+  * SPL, devices with stereo speaker amp
+  * SPR, devices with stereo speaker amp
+  * SPK, devices with mono speaker amp
+  * MICBIAS
+
+CODEC input pins:
+  * MIC1LP, devices with ADC
+  * MIC1RP, devices with ADC
+  * MIC1LM, devices with ADC
+  * AIN1, devices without ADC
+  * AIN2, devices without ADC
+
+The pins can be used in referring sound node's audio-routing property.
+
+Example:
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/tlv320aic31xx-micbias.h>
+
+tlv320aic31xx: tlv320aic31xx@18 {
+	compatible = "ti,tlv320aic311x";
+	reg = <0x18>;
+
+	ai31xx-micbias-vg = <MICBIAS_OFF>;
+
+	reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+
+	HPVDD-supply = <&regulator>;
+	SPRVDD-supply = <&regulator>;
+	SPLVDD-supply = <&regulator>;
+	AVDD-supply = <&regulator>;
+	IOVDD-supply = <&regulator>;
+	DVDD-supply = <&regulator>;
+};