diff options
Diffstat (limited to 'arch/arm/boot/dts/aspeed-g6.dtsi')
-rw-r--r-- | arch/arm/boot/dts/aspeed-g6.dtsi | 922 |
1 files changed, 922 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi new file mode 100644 index 000000000..1cf71bdb4 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -0,0 +1,922 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2019 IBM Corp. + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h> +#include <dt-bindings/clock/ast2600-clock.h> + +/ { + model = "Aspeed BMC"; + compatible = "aspeed,ast2600"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + i2c14 = &i2c14; + i2c15 = &i2c15; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &vuart1; + serial6 = &vuart2; + }; + + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "aspeed,ast2600-smp"; + + cpu@f00 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0xf00>; + }; + + cpu@f01 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0xf01>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + clocks = <&syscon ASPEED_CLK_HPLL>; + arm,cpu-registers-not-fw-configured; + always-on; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges; + + gic: interrupt-controller@40461000 { + compatible = "arm,cortex-a7-gic"; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&gic>; + reg = <0x40461000 0x1000>, + <0x40462000 0x1000>, + <0x40464000 0x2000>, + <0x40466000 0x2000>; + }; + + fmc: spi@1e620000 { + reg = < 0x1e620000 0xc4 + 0x20000000 0x10000000 >; + #address-cells = <1>; + #size-cells = <0>; + compatible = "aspeed,ast2600-fmc"; + clocks = <&syscon ASPEED_CLK_AHB>; + status = "disabled"; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + flash@0 { + reg = < 0 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + flash@1 { + reg = < 1 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + flash@2 { + reg = < 2 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + }; + + spi1: spi@1e630000 { + reg = < 0x1e630000 0xc4 + 0x30000000 0x10000000 >; + #address-cells = <1>; + #size-cells = <0>; + compatible = "aspeed,ast2600-spi"; + clocks = <&syscon ASPEED_CLK_AHB>; + status = "disabled"; + flash@0 { + reg = < 0 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + flash@1 { + reg = < 1 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + }; + + spi2: spi@1e631000 { + reg = < 0x1e631000 0xc4 + 0x50000000 0x10000000 >; + #address-cells = <1>; + #size-cells = <0>; + compatible = "aspeed,ast2600-spi"; + clocks = <&syscon ASPEED_CLK_AHB>; + status = "disabled"; + flash@0 { + reg = < 0 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + flash@1 { + reg = < 1 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + flash@2 { + reg = < 2 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + }; + + mdio0: mdio@1e650000 { + compatible = "aspeed,ast2600-mdio"; + reg = <0x1e650000 0x8>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio1_default>; + }; + + mdio1: mdio@1e650008 { + compatible = "aspeed,ast2600-mdio"; + reg = <0x1e650008 0x8>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio2_default>; + }; + + mdio2: mdio@1e650010 { + compatible = "aspeed,ast2600-mdio"; + reg = <0x1e650010 0x8>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio3_default>; + }; + + mdio3: mdio@1e650018 { + compatible = "aspeed,ast2600-mdio"; + reg = <0x1e650018 0x8>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio4_default>; + }; + + mac0: ftgmac@1e660000 { + compatible = "aspeed,ast2600-mac", "faraday,ftgmac100"; + reg = <0x1e660000 0x180>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>; + status = "disabled"; + }; + + mac1: ftgmac@1e680000 { + compatible = "aspeed,ast2600-mac", "faraday,ftgmac100"; + reg = <0x1e680000 0x180>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>; + status = "disabled"; + }; + + mac2: ftgmac@1e670000 { + compatible = "aspeed,ast2600-mac", "faraday,ftgmac100"; + reg = <0x1e670000 0x180>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>; + status = "disabled"; + }; + + mac3: ftgmac@1e690000 { + compatible = "aspeed,ast2600-mac", "faraday,ftgmac100"; + reg = <0x1e690000 0x180>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>; + status = "disabled"; + }; + + ehci0: usb@1e6a1000 { + compatible = "aspeed,ast2600-ehci", "generic-ehci"; + reg = <0x1e6a1000 0x100>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ah_default>; + status = "disabled"; + }; + + ehci1: usb@1e6a3000 { + compatible = "aspeed,ast2600-ehci", "generic-ehci"; + reg = <0x1e6a3000 0x100>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2bh_default>; + status = "disabled"; + }; + + uhci: usb@1e6b0000 { + compatible = "aspeed,ast2600-uhci", "generic-uhci"; + reg = <0x1e6b0000 0x100>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #ports = <2>; + clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>; + status = "disabled"; + /* + * No default pinmux, it will follow EHCI, use an + * explicit pinmux override if EHCI is not enabled. + */ + }; + + vhub: usb-vhub@1e6a0000 { + compatible = "aspeed,ast2600-usb-vhub"; + reg = <0x1e6a0000 0x350>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + aspeed,vhub-downstream-ports = <7>; + aspeed,vhub-generic-endpoints = <21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ad_default>; + status = "disabled"; + }; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon: syscon@1e6e2000 { + compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1000>; + ranges = <0 0x1e6e2000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + #clock-cells = <1>; + #reset-cells = <1>; + + pinctrl: pinctrl { + compatible = "aspeed,ast2600-pinctrl"; + }; + + smp-memram@180 { + compatible = "aspeed,ast2600-smpmem"; + reg = <0x180 0x40>; + }; + + scu_ic0: interrupt-controller@560 { + #interrupt-cells = <1>; + compatible = "aspeed,ast2600-scu-ic0"; + reg = <0x560 0x4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + }; + + scu_ic1: interrupt-controller@570 { + #interrupt-cells = <1>; + compatible = "aspeed,ast2600-scu-ic1"; + reg = <0x570 0x4>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + }; + }; + + rng: hwrng@1e6e2524 { + compatible = "timeriomem_rng"; + reg = <0x1e6e2524 0x4>; + period = <1>; + quality = <100>; + }; + + xdma: xdma@1e6e7000 { + compatible = "aspeed,ast2600-xdma"; + reg = <0x1e6e7000 0x100>; + clocks = <&syscon ASPEED_CLK_GATE_BCLK>; + resets = <&syscon ASPEED_RESET_DEV_XDMA>, <&syscon ASPEED_RESET_RC_XDMA>; + reset-names = "device", "root-complex"; + interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <&scu_ic0 ASPEED_AST2600_SCU_IC0_PCIE_PERST_LO_TO_HI>; + aspeed,pcie-device = "bmc"; + aspeed,scu = <&syscon>; + status = "disabled"; + }; + + gpio0: gpio@1e780000 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2600-gpio"; + reg = <0x1e780000 0x400>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 0 208>; + ngpios = <208>; + clocks = <&syscon ASPEED_CLK_APB2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@1e780800 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2600-gpio"; + reg = <0x1e780800 0x800>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 208 36>; + ngpios = <36>; + clocks = <&syscon ASPEED_CLK_APB1>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + rtc: rtc@1e781000 { + compatible = "aspeed,ast2600-rtc"; + reg = <0x1e781000 0x18>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + timer: timer@1e782000 { + compatible = "aspeed,ast2600-timer"; + reg = <0x1e782000 0x90>; + interrupts-extended = <&gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_APB1>; + clock-names = "PCLK"; + status = "disabled"; + }; + + uart1: serial@1e783000 { + compatible = "ns16550a"; + reg = <0x1e783000 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>; + resets = <&lpc_reset 4>; + no-loopback-test; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default &pinctrl_rxd1_default>; + status = "disabled"; + }; + + uart5: serial@1e784000 { + compatible = "ns16550a"; + reg = <0x1e784000 0x1000>; + reg-shift = <2>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>; + no-loopback-test; + }; + + wdt1: watchdog@1e785000 { + compatible = "aspeed,ast2600-wdt"; + reg = <0x1e785000 0x40>; + }; + + wdt2: watchdog@1e785040 { + compatible = "aspeed,ast2600-wdt"; + reg = <0x1e785040 0x40>; + status = "disabled"; + }; + + wdt3: watchdog@1e785080 { + compatible = "aspeed,ast2600-wdt"; + reg = <0x1e785080 0x40>; + status = "disabled"; + }; + + wdt4: watchdog@1e7850c0 { + compatible = "aspeed,ast2600-wdt"; + reg = <0x1e7850C0 0x40>; + status = "disabled"; + }; + + lpc: lpc@1e789000 { + compatible = "aspeed,ast2600-lpc", "simple-mfd"; + reg = <0x1e789000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e789000 0x1000>; + + lpc_bmc: lpc-bmc@0 { + compatible = "aspeed,ast2600-lpc-bmc", "simple-mfd", "syscon"; + reg = <0x0 0x80>; + reg-io-width = <4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x80>; + + kcs1: kcs@24 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + kcs_chan = <1>; + status = "disabled"; + }; + kcs2: kcs@28 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + kcs3: kcs@2c { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + lpc_host: lpc-host@80 { + compatible = "aspeed,ast2600-lpc-host", "simple-mfd", "syscon"; + reg = <0x80 0x1e0>; + reg-io-width = <4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80 0x1e0>; + + kcs4: kcs@94 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + lpc_ctrl: lpc-ctrl@0 { + compatible = "aspeed,ast2600-lpc-ctrl"; + reg = <0x0 0x80>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; + status = "disabled"; + }; + + lpc_snoop: lpc-snoop@0 { + compatible = "aspeed,ast2600-lpc-snoop"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; + status = "disabled"; + }; + + lhc: lhc@20 { + compatible = "aspeed,ast2600-lhc"; + reg = <0x20 0x24 0x48 0x8>; + }; + + lpc_reset: reset-controller@18 { + compatible = "aspeed,ast2600-lpc-reset"; + reg = <0x18 0x4>; + #reset-cells = <1>; + }; + + ibt: ibt@c0 { + compatible = "aspeed,ast2600-ibt-bmc"; + reg = <0xc0 0x18>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + }; + + sdc: sdc@1e740000 { + compatible = "aspeed,ast2600-sd-controller"; + reg = <0x1e740000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e740000 0x10000>; + clocks = <&syscon ASPEED_CLK_GATE_SDCLK>; + status = "disabled"; + + sdhci0: sdhci@1e740100 { + compatible = "aspeed,ast2600-sdhci", "sdhci"; + reg = <0x100 0x100>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + sdhci,auto-cmd12; + clocks = <&syscon ASPEED_CLK_SDIO>; + status = "disabled"; + }; + + sdhci1: sdhci@1e740200 { + compatible = "aspeed,ast2600-sdhci", "sdhci"; + reg = <0x200 0x100>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + sdhci,auto-cmd12; + clocks = <&syscon ASPEED_CLK_SDIO>; + status = "disabled"; + }; + }; + + emmc_controller: sdc@1e750000 { + compatible = "aspeed,ast2600-sd-controller"; + reg = <0x1e750000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e750000 0x10000>; + clocks = <&syscon ASPEED_CLK_GATE_EMMCCLK>; + status = "disabled"; + + emmc: sdhci@1e750100 { + compatible = "aspeed,ast2600-sdhci"; + reg = <0x100 0x100>; + sdhci,auto-cmd12; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_EMMC>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emmc_default>; + }; + }; + + vuart1: serial@1e787000 { + compatible = "aspeed,ast2500-vuart"; + reg = <0x1e787000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_APB1>; + no-loopback-test; + status = "disabled"; + }; + + vuart2: serial@1e788000 { + compatible = "aspeed,ast2500-vuart"; + reg = <0x1e788000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_APB1>; + no-loopback-test; + status = "disabled"; + }; + + uart2: serial@1e78d000 { + compatible = "ns16550a"; + reg = <0x1e78d000 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>; + resets = <&lpc_reset 5>; + no-loopback-test; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; + status = "disabled"; + }; + + uart3: serial@1e78e000 { + compatible = "ns16550a"; + reg = <0x1e78e000 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>; + resets = <&lpc_reset 6>; + no-loopback-test; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>; + status = "disabled"; + }; + + uart4: serial@1e78f000 { + compatible = "ns16550a"; + reg = <0x1e78f000 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>; + resets = <&lpc_reset 7>; + no-loopback-test; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd4_default &pinctrl_rxd4_default>; + status = "disabled"; + }; + + i2c: bus@1e78a000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e78a000 0x1000>; + }; + + fsim0: fsi@1e79b000 { + compatible = "aspeed,ast2600-fsi-master", "fsi-master"; + reg = <0x1e79b000 0x94>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fsi1_default>; + clocks = <&syscon ASPEED_CLK_GATE_FSICLK>; + status = "disabled"; + }; + + fsim1: fsi@1e79b100 { + compatible = "aspeed,ast2600-fsi-master", "fsi-master"; + reg = <0x1e79b100 0x94>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fsi2_default>; + clocks = <&syscon ASPEED_CLK_GATE_FSICLK>; + status = "disabled"; + }; + }; + }; +}; + +#include "aspeed-g6-pinctrl.dtsi" + +&i2c { + i2c0: i2c-bus@80 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; + status = "disabled"; + }; + + i2c1: i2c-bus@100 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x100 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_default>; + status = "disabled"; + }; + + i2c2: i2c-bus@180 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x180 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_default>; + status = "disabled"; + }; + + i2c3: i2c-bus@200 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x200 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4_default>; + status = "disabled"; + }; + + i2c4: i2c-bus@280 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x280 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c5_default>; + status = "disabled"; + }; + + i2c5: i2c-bus@300 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x300 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c6_default>; + status = "disabled"; + }; + + i2c6: i2c-bus@380 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x380 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c7_default>; + status = "disabled"; + }; + + i2c7: i2c-bus@400 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x400 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c8_default>; + status = "disabled"; + }; + + i2c8: i2c-bus@480 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x480 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c9_default>; + status = "disabled"; + }; + + i2c9: i2c-bus@500 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x500 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c10_default>; + status = "disabled"; + }; + + i2c10: i2c-bus@580 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x580 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c11_default>; + status = "disabled"; + }; + + i2c11: i2c-bus@600 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x600 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c12_default>; + status = "disabled"; + }; + + i2c12: i2c-bus@680 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x680 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c13_default>; + status = "disabled"; + }; + + i2c13: i2c-bus@700 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x700 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c14_default>; + status = "disabled"; + }; + + i2c14: i2c-bus@780 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x780 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c15_default>; + status = "disabled"; + }; + + i2c15: i2c-bus@800 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x800 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c16_default>; + status = "disabled"; + }; +}; |