diff options
Diffstat (limited to 'arch/arm/boot/dts/gemini-wbd111.dts')
| -rw-r--r-- | arch/arm/boot/dts/gemini-wbd111.dts | 183 |
1 files changed, 183 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts new file mode 100644 index 000000000..5602ba8f3 --- /dev/null +++ b/arch/arm/boot/dts/gemini-wbd111.dts @@ -0,0 +1,183 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for Wiliboard WBD-111 + */ + +/dts-v1/; + +#include "gemini.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Wiliboard WBD-111"; + compatible = "wiliboard,wbd111", "cortina,gemini"; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; + }; + + gpio_keys { + compatible = "gpio-keys"; + + button-setup { + debounce-interval = <100>; + wakeup-source; + linux,code = <KEY_SETUP>; + label = "reset"; + /* Conflict with ICE */ + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-red-l3 { + label = "wbd111:red:L3"; + /* Conflict with TVC and extended parallel flash */ + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led-green-l4 { + label = "wbd111:green:L4"; + /* Conflict with TVC and extended parallel flash */ + gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led-red-l4 { + label = "wbd111:red:L4"; + /* Conflict with TVC and extended parallel flash */ + gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led-greeb-l3 { + label = "wbd111:green:L3"; + /* Conflict with TVC and extended parallel flash */ + gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + soc { + flash@30000000 { + status = "okay"; + /* 8MB of flash */ + reg = <0x30000000 0x00800000>; + + partition@0 { + label = "RedBoot"; + reg = <0x00000000 0x00020000>; + read-only; + }; + partition@20000 { + label = "kernel"; + reg = <0x00020000 0x00100000>; + }; + partition@120000 { + label = "rootfs"; + reg = <0x00120000 0x006a0000>; + }; + partition@7c0000 { + label = "VCTL"; + reg = <0x007c0000 0x00010000>; + read-only; + }; + partition@7d0000 { + label = "cfg"; + reg = <0x007d0000 0x00010000>; + read-only; + }; + partition@7e0000 { + label = "FIS"; + reg = <0x007e0000 0x00010000>; + read-only; + }; + }; + + syscon: syscon@40000000 { + pinctrl { + /* + * gpio0agrp cover line 0-4 + * gpio0bgrp cover line 5 + */ + gpio0_default_pins: pinctrl-gpio0 { + mux { + function = "gpio0"; + groups = "gpio0agrp", + "gpio0bgrp"; + }; + }; + }; + }; + + gpio0: gpio@4d000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_default_pins>; + }; + + pci@50000000 { + status = "okay"; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = + <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ + <0x4800 0 0 2 &pci_intc 1>, + <0x4800 0 0 3 &pci_intc 2>, + <0x4800 0 0 4 &pci_intc 3>, + <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ + <0x5000 0 0 2 &pci_intc 2>, + <0x5000 0 0 3 &pci_intc 3>, + <0x5000 0 0 4 &pci_intc 0>, + <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ + <0x5800 0 0 2 &pci_intc 3>, + <0x5800 0 0 3 &pci_intc 0>, + <0x5800 0 0 4 &pci_intc 1>, + <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ + <0x6000 0 0 2 &pci_intc 0>, + <0x6000 0 0 3 &pci_intc 1>, + <0x6000 0 0 4 &pci_intc 2>; + }; + + ethernet@60000000 { + status = "okay"; + + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet-port@1 { + /* Not used in this platform */ + }; + }; + + usb@68000000 { + status = "okay"; + }; + + usb@69000000 { + status = "okay"; + }; + }; +}; |