diff options
Diffstat (limited to 'arch/arm/kernel/head.S')
| -rw-r--r-- | arch/arm/kernel/head.S | 726 |
1 files changed, 726 insertions, 0 deletions
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S new file mode 100644 index 000000000..4af5c7679 --- /dev/null +++ b/arch/arm/kernel/head.S @@ -0,0 +1,726 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * linux/arch/arm/kernel/head.S + * + * Copyright (C) 1994-2002 Russell King + * Copyright (c) 2003 ARM Limited + * All Rights Reserved + * + * Kernel startup code for all 32-bit CPUs + */ +#include <linux/linkage.h> +#include <linux/init.h> +#include <linux/pgtable.h> + +#include <asm/assembler.h> +#include <asm/cp15.h> +#include <asm/domain.h> +#include <asm/ptrace.h> +#include <asm/asm-offsets.h> +#include <asm/memory.h> +#include <asm/thread_info.h> + +#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_SEMIHOSTING) +#include CONFIG_DEBUG_LL_INCLUDE +#endif + +/* + * swapper_pg_dir is the virtual address of the initial page table. + * We place the page tables 16K below KERNEL_RAM_VADDR. Therefore, we must + * make sure that KERNEL_RAM_VADDR is correctly set. Currently, we expect + * the least significant 16 bits to be 0x8000, but we could probably + * relax this restriction to KERNEL_RAM_VADDR >= PAGE_OFFSET + 0x4000. + */ +#define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET) +#if (KERNEL_RAM_VADDR & 0xffff) != 0x8000 +#error KERNEL_RAM_VADDR must start at 0xXXXX8000 +#endif + +#ifdef CONFIG_ARM_LPAE + /* LPAE requires an additional page for the PGD */ +#define PG_DIR_SIZE 0x5000 +#define PMD_ORDER 3 +#else +#define PG_DIR_SIZE 0x4000 +#define PMD_ORDER 2 +#endif + + .globl swapper_pg_dir + .equ swapper_pg_dir, KERNEL_RAM_VADDR - PG_DIR_SIZE + + .macro pgtbl, rd, phys + add \rd, \phys, #TEXT_OFFSET + sub \rd, \rd, #PG_DIR_SIZE + .endm + +/* + * Kernel startup entry point. + * --------------------------- + * + * This is normally called from the decompressor code. The requirements + * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0, + * r1 = machine nr, r2 = atags or dtb pointer. + * + * This code is mostly position independent, so if you link the kernel at + * 0xc0008000, you call this at __pa(0xc0008000). + * + * See linux/arch/arm/tools/mach-types for the complete list of machine + * numbers for r1. + * + * We're trying to keep crap to a minimum; DO NOT add any machine specific + * crap here - that's what the boot loader (or in extreme, well justified + * circumstances, zImage) is for. + */ + .arm + + __HEAD +ENTRY(stext) + ARM_BE8(setend be ) @ ensure we are in BE8 mode + + THUMB( badr r9, 1f ) @ Kernel is always entered in ARM. + THUMB( bx r9 ) @ If this is a Thumb-2 kernel, + THUMB( .thumb ) @ switch to Thumb now. + THUMB(1: ) + +#ifdef CONFIG_ARM_VIRT_EXT + bl __hyp_stub_install +#endif + @ ensure svc mode and all interrupts masked + safe_svcmode_maskall r9 + + mrc p15, 0, r9, c0, c0 @ get processor id + bl __lookup_processor_type @ r5=procinfo r9=cpuid + movs r10, r5 @ invalid processor (r5=0)? + THUMB( it eq ) @ force fixup-able long branch encoding + beq __error_p @ yes, error 'p' + +#ifdef CONFIG_ARM_LPAE + mrc p15, 0, r3, c0, c1, 4 @ read ID_MMFR0 + and r3, r3, #0xf @ extract VMSA support + cmp r3, #5 @ long-descriptor translation table format? + THUMB( it lo ) @ force fixup-able long branch encoding + blo __error_lpae @ only classic page table format +#endif + +#ifndef CONFIG_XIP_KERNEL + adr r3, 2f + ldmia r3, {r4, r8} + sub r4, r3, r4 @ (PHYS_OFFSET - PAGE_OFFSET) + add r8, r8, r4 @ PHYS_OFFSET +#else + ldr r8, =PLAT_PHYS_OFFSET @ always constant in this case +#endif + + /* + * r1 = machine no, r2 = atags or dtb, + * r8 = phys_offset, r9 = cpuid, r10 = procinfo + */ + bl __vet_atags +#ifdef CONFIG_SMP_ON_UP + bl __fixup_smp +#endif +#ifdef CONFIG_ARM_PATCH_PHYS_VIRT + bl __fixup_pv_table +#endif + bl __create_page_tables + + /* + * The following calls CPU specific code in a position independent + * manner. See arch/arm/mm/proc-*.S for details. r10 = base of + * xxx_proc_info structure selected by __lookup_processor_type + * above. + * + * The processor init function will be called with: + * r1 - machine type + * r2 - boot data (atags/dt) pointer + * r4 - translation table base (low word) + * r5 - translation table base (high word, if LPAE) + * r8 - translation table base 1 (pfn if LPAE) + * r9 - cpuid + * r13 - virtual address for __enable_mmu -> __turn_mmu_on + * + * On return, the CPU will be ready for the MMU to be turned on, + * r0 will hold the CPU control register value, r1, r2, r4, and + * r9 will be preserved. r5 will also be preserved if LPAE. + */ + ldr r13, =__mmap_switched @ address to jump to after + @ mmu has been enabled + badr lr, 1f @ return (PIC) address +#ifdef CONFIG_ARM_LPAE + mov r5, #0 @ high TTBR0 + mov r8, r4, lsr #12 @ TTBR1 is swapper_pg_dir pfn +#else + mov r8, r4 @ set TTBR1 to swapper_pg_dir +#endif + ldr r12, [r10, #PROCINFO_INITFUNC] + add r12, r12, r10 + ret r12 +1: b __enable_mmu +ENDPROC(stext) + .ltorg +#ifndef CONFIG_XIP_KERNEL +2: .long . + .long PAGE_OFFSET +#endif + +/* + * Setup the initial page tables. We only setup the barest + * amount which are required to get the kernel running, which + * generally means mapping in the kernel code. + * + * r8 = phys_offset, r9 = cpuid, r10 = procinfo + * + * Returns: + * r0, r3, r5-r7 corrupted + * r4 = physical page table address + */ +__create_page_tables: + pgtbl r4, r8 @ page table address + + /* + * Clear the swapper page table + */ + mov r0, r4 + mov r3, #0 + add r6, r0, #PG_DIR_SIZE +1: str r3, [r0], #4 + str r3, [r0], #4 + str r3, [r0], #4 + str r3, [r0], #4 + teq r0, r6 + bne 1b + +#ifdef CONFIG_ARM_LPAE + /* + * Build the PGD table (first level) to point to the PMD table. A PGD + * entry is 64-bit wide. + */ + mov r0, r4 + add r3, r4, #0x1000 @ first PMD table address + orr r3, r3, #3 @ PGD block type + mov r6, #4 @ PTRS_PER_PGD + mov r7, #1 << (55 - 32) @ L_PGD_SWAPPER +1: +#ifdef CONFIG_CPU_ENDIAN_BE8 + str r7, [r0], #4 @ set top PGD entry bits + str r3, [r0], #4 @ set bottom PGD entry bits +#else + str r3, [r0], #4 @ set bottom PGD entry bits + str r7, [r0], #4 @ set top PGD entry bits +#endif + add r3, r3, #0x1000 @ next PMD table + subs r6, r6, #1 + bne 1b + + add r4, r4, #0x1000 @ point to the PMD tables +#ifdef CONFIG_CPU_ENDIAN_BE8 + add r4, r4, #4 @ we only write the bottom word +#endif +#endif + + ldr r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags + + /* + * Create identity mapping to cater for __enable_mmu. + * This identity mapping will be removed by paging_init(). + */ + adr r0, __turn_mmu_on_loc + ldmia r0, {r3, r5, r6} + sub r0, r0, r3 @ virt->phys offset + add r5, r5, r0 @ phys __turn_mmu_on + add r6, r6, r0 @ phys __turn_mmu_on_end + mov r5, r5, lsr #SECTION_SHIFT + mov r6, r6, lsr #SECTION_SHIFT + +1: orr r3, r7, r5, lsl #SECTION_SHIFT @ flags + kernel base + str r3, [r4, r5, lsl #PMD_ORDER] @ identity mapping + cmp r5, r6 + addlo r5, r5, #1 @ next section + blo 1b + + /* + * Map our RAM from the start to the end of the kernel .bss section. + */ + add r0, r4, #PAGE_OFFSET >> (SECTION_SHIFT - PMD_ORDER) + ldr r6, =(_end - 1) + orr r3, r8, r7 + add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER) +1: str r3, [r0], #1 << PMD_ORDER + add r3, r3, #1 << SECTION_SHIFT + cmp r0, r6 + bls 1b + +#ifdef CONFIG_XIP_KERNEL + /* + * Map the kernel image separately as it is not located in RAM. + */ +#define XIP_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR) + mov r3, pc + mov r3, r3, lsr #SECTION_SHIFT + orr r3, r7, r3, lsl #SECTION_SHIFT + add r0, r4, #(XIP_START & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER) + str r3, [r0, #((XIP_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ORDER]! + ldr r6, =(_edata_loc - 1) + add r0, r0, #1 << PMD_ORDER + add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER) +1: cmp r0, r6 + add r3, r3, #1 << SECTION_SHIFT + strls r3, [r0], #1 << PMD_ORDER + bls 1b +#endif + + /* + * Then map boot params address in r2 if specified. + * We map 2 sections in case the ATAGs/DTB crosses a section boundary. + */ + mov r0, r2, lsr #SECTION_SHIFT + cmp r2, #0 + ldrne r3, =FDT_FIXED_BASE >> (SECTION_SHIFT - PMD_ORDER) + addne r3, r3, r4 + orrne r6, r7, r0, lsl #SECTION_SHIFT + strne r6, [r3], #1 << PMD_ORDER + addne r6, r6, #1 << SECTION_SHIFT + strne r6, [r3] + +#if defined(CONFIG_ARM_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8) + sub r4, r4, #4 @ Fixup page table pointer + @ for 64-bit descriptors +#endif + +#ifdef CONFIG_DEBUG_LL +#if !defined(CONFIG_DEBUG_ICEDCC) && !defined(CONFIG_DEBUG_SEMIHOSTING) + /* + * Map in IO space for serial debugging. + * This allows debug messages to be output + * via a serial console before paging_init. + */ + addruart r7, r3, r0 + + mov r3, r3, lsr #SECTION_SHIFT + mov r3, r3, lsl #PMD_ORDER + + add r0, r4, r3 + mov r3, r7, lsr #SECTION_SHIFT + ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags + orr r3, r7, r3, lsl #SECTION_SHIFT +#ifdef CONFIG_ARM_LPAE + mov r7, #1 << (54 - 32) @ XN +#ifdef CONFIG_CPU_ENDIAN_BE8 + str r7, [r0], #4 + str r3, [r0], #4 +#else + str r3, [r0], #4 + str r7, [r0], #4 +#endif +#else + orr r3, r3, #PMD_SECT_XN + str r3, [r0], #4 +#endif + +#else /* CONFIG_DEBUG_ICEDCC || CONFIG_DEBUG_SEMIHOSTING */ + /* we don't need any serial debugging mappings */ + ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags +#endif + +#if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS) + /* + * If we're using the NetWinder or CATS, we also need to map + * in the 16550-type serial port for the debug messages + */ + add r0, r4, #0xff000000 >> (SECTION_SHIFT - PMD_ORDER) + orr r3, r7, #0x7c000000 + str r3, [r0] +#endif +#ifdef CONFIG_ARCH_RPC + /* + * Map in screen at 0x02000000 & SCREEN2_BASE + * Similar reasons here - for debug. This is + * only for Acorn RiscPC architectures. + */ + add r0, r4, #0x02000000 >> (SECTION_SHIFT - PMD_ORDER) + orr r3, r7, #0x02000000 + str r3, [r0] + add r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_ORDER) + str r3, [r0] +#endif +#endif +#ifdef CONFIG_ARM_LPAE + sub r4, r4, #0x1000 @ point to the PGD table +#endif + ret lr +ENDPROC(__create_page_tables) + .ltorg + .align +__turn_mmu_on_loc: + .long . + .long __turn_mmu_on + .long __turn_mmu_on_end + +#if defined(CONFIG_SMP) + .text + .arm +ENTRY(secondary_startup_arm) + THUMB( badr r9, 1f ) @ Kernel is entered in ARM. + THUMB( bx r9 ) @ If this is a Thumb-2 kernel, + THUMB( .thumb ) @ switch to Thumb now. + THUMB(1: ) +ENTRY(secondary_startup) + /* + * Common entry point for secondary CPUs. + * + * Ensure that we're in SVC mode, and IRQs are disabled. Lookup + * the processor type - there is no need to check the machine type + * as it has already been validated by the primary processor. + */ + + ARM_BE8(setend be) @ ensure we are in BE8 mode + +#ifdef CONFIG_ARM_VIRT_EXT + bl __hyp_stub_install_secondary +#endif + safe_svcmode_maskall r9 + + mrc p15, 0, r9, c0, c0 @ get processor id + bl __lookup_processor_type + movs r10, r5 @ invalid processor? + moveq r0, #'p' @ yes, error 'p' + THUMB( it eq ) @ force fixup-able long branch encoding + beq __error_p + + /* + * Use the page tables supplied from __cpu_up. + */ + adr r4, __secondary_data + ldmia r4, {r5, r7, r12} @ address to jump to after + sub lr, r4, r5 @ mmu has been enabled + add r3, r7, lr + ldrd r4, r5, [r3, #0] @ get secondary_data.pgdir +ARM_BE8(eor r4, r4, r5) @ Swap r5 and r4 in BE: +ARM_BE8(eor r5, r4, r5) @ it can be done in 3 steps +ARM_BE8(eor r4, r4, r5) @ without using a temp reg. + ldr r8, [r3, #8] @ get secondary_data.swapper_pg_dir + badr lr, __enable_mmu @ return address + mov r13, r12 @ __secondary_switched address + ldr r12, [r10, #PROCINFO_INITFUNC] + add r12, r12, r10 @ initialise processor + @ (return control reg) + ret r12 +ENDPROC(secondary_startup) +ENDPROC(secondary_startup_arm) + + /* + * r6 = &secondary_data + */ +ENTRY(__secondary_switched) + ldr sp, [r7, #12] @ get secondary_data.stack + mov fp, #0 + b secondary_start_kernel +ENDPROC(__secondary_switched) + + .align + + .type __secondary_data, %object +__secondary_data: + .long . + .long secondary_data + .long __secondary_switched +#endif /* defined(CONFIG_SMP) */ + + + +/* + * Setup common bits before finally enabling the MMU. Essentially + * this is just loading the page table pointer and domain access + * registers. All these registers need to be preserved by the + * processor setup function (or set in the case of r0) + * + * r0 = cp#15 control register + * r1 = machine ID + * r2 = atags or dtb pointer + * r4 = TTBR pointer (low word) + * r5 = TTBR pointer (high word if LPAE) + * r9 = processor ID + * r13 = *virtual* address to jump to upon completion + */ +__enable_mmu: +#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6 + orr r0, r0, #CR_A +#else + bic r0, r0, #CR_A +#endif +#ifdef CONFIG_CPU_DCACHE_DISABLE + bic r0, r0, #CR_C +#endif +#ifdef CONFIG_CPU_BPREDICT_DISABLE + bic r0, r0, #CR_Z +#endif +#ifdef CONFIG_CPU_ICACHE_DISABLE + bic r0, r0, #CR_I +#endif +#ifdef CONFIG_ARM_LPAE + mcrr p15, 0, r4, r5, c2 @ load TTBR0 +#else + mov r5, #DACR_INIT + mcr p15, 0, r5, c3, c0, 0 @ load domain access register + mcr p15, 0, r4, c2, c0, 0 @ load page table pointer +#endif + b __turn_mmu_on +ENDPROC(__enable_mmu) + +/* + * Enable the MMU. This completely changes the structure of the visible + * memory space. You will not be able to trace execution through this. + * If you have an enquiry about this, *please* check the linux-arm-kernel + * mailing list archives BEFORE sending another post to the list. + * + * r0 = cp#15 control register + * r1 = machine ID + * r2 = atags or dtb pointer + * r9 = processor ID + * r13 = *virtual* address to jump to upon completion + * + * other registers depend on the function called upon completion + */ + .align 5 + .pushsection .idmap.text, "ax" +ENTRY(__turn_mmu_on) + mov r0, r0 + instr_sync + mcr p15, 0, r0, c1, c0, 0 @ write control reg + mrc p15, 0, r3, c0, c0, 0 @ read id reg + instr_sync + mov r3, r3 + mov r3, r13 + ret r3 +__turn_mmu_on_end: +ENDPROC(__turn_mmu_on) + .popsection + + +#ifdef CONFIG_SMP_ON_UP + __HEAD +__fixup_smp: + and r3, r9, #0x000f0000 @ architecture version + teq r3, #0x000f0000 @ CPU ID supported? + bne __fixup_smp_on_up @ no, assume UP + + bic r3, r9, #0x00ff0000 + bic r3, r3, #0x0000000f @ mask 0xff00fff0 + mov r4, #0x41000000 + orr r4, r4, #0x0000b000 + orr r4, r4, #0x00000020 @ val 0x4100b020 + teq r3, r4 @ ARM 11MPCore? + reteq lr @ yes, assume SMP + + mrc p15, 0, r0, c0, c0, 5 @ read MPIDR + and r0, r0, #0xc0000000 @ multiprocessing extensions and + teq r0, #0x80000000 @ not part of a uniprocessor system? + bne __fixup_smp_on_up @ no, assume UP + + @ Core indicates it is SMP. Check for Aegis SOC where a single + @ Cortex-A9 CPU is present but SMP operations fault. + mov r4, #0x41000000 + orr r4, r4, #0x0000c000 + orr r4, r4, #0x00000090 + teq r3, r4 @ Check for ARM Cortex-A9 + retne lr @ Not ARM Cortex-A9, + + @ If a future SoC *does* use 0x0 as the PERIPH_BASE, then the + @ below address check will need to be #ifdef'd or equivalent + @ for the Aegis platform. + mrc p15, 4, r0, c15, c0 @ get SCU base address + teq r0, #0x0 @ '0' on actual UP A9 hardware + beq __fixup_smp_on_up @ So its an A9 UP + ldr r0, [r0, #4] @ read SCU Config +ARM_BE8(rev r0, r0) @ byteswap if big endian + and r0, r0, #0x3 @ number of CPUs + teq r0, #0x0 @ is 1? + retne lr + +__fixup_smp_on_up: + adr r0, 1f + ldmia r0, {r3 - r5} + sub r3, r0, r3 + add r4, r4, r3 + add r5, r5, r3 + b __do_fixup_smp_on_up +ENDPROC(__fixup_smp) + + .align +1: .word . + .word __smpalt_begin + .word __smpalt_end + + .pushsection .data + .align 2 + .globl smp_on_up +smp_on_up: + ALT_SMP(.long 1) + ALT_UP(.long 0) + .popsection +#endif + + .text +__do_fixup_smp_on_up: + cmp r4, r5 + reths lr + ldmia r4!, {r0, r6} + ARM( str r6, [r0, r3] ) + THUMB( add r0, r0, r3 ) +#ifdef __ARMEB__ + THUMB( mov r6, r6, ror #16 ) @ Convert word order for big-endian. +#endif + THUMB( strh r6, [r0], #2 ) @ For Thumb-2, store as two halfwords + THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r3. + THUMB( strh r6, [r0] ) + b __do_fixup_smp_on_up +ENDPROC(__do_fixup_smp_on_up) + +ENTRY(fixup_smp) + stmfd sp!, {r4 - r6, lr} + mov r4, r0 + add r5, r0, r1 + mov r3, #0 + bl __do_fixup_smp_on_up + ldmfd sp!, {r4 - r6, pc} +ENDPROC(fixup_smp) + +#ifdef __ARMEB__ +#define LOW_OFFSET 0x4 +#define HIGH_OFFSET 0x0 +#else +#define LOW_OFFSET 0x0 +#define HIGH_OFFSET 0x4 +#endif + +#ifdef CONFIG_ARM_PATCH_PHYS_VIRT + +/* __fixup_pv_table - patch the stub instructions with the delta between + * PHYS_OFFSET and PAGE_OFFSET, which is assumed to be 16MiB aligned and + * can be expressed by an immediate shifter operand. The stub instruction + * has a form of '(add|sub) rd, rn, #imm'. + */ + __HEAD +__fixup_pv_table: + adr r0, 1f + ldmia r0, {r3-r7} + mvn ip, #0 + subs r3, r0, r3 @ PHYS_OFFSET - PAGE_OFFSET + add r4, r4, r3 @ adjust table start address + add r5, r5, r3 @ adjust table end address + add r6, r6, r3 @ adjust __pv_phys_pfn_offset address + add r7, r7, r3 @ adjust __pv_offset address + mov r0, r8, lsr #PAGE_SHIFT @ convert to PFN + str r0, [r6] @ save computed PHYS_OFFSET to __pv_phys_pfn_offset + strcc ip, [r7, #HIGH_OFFSET] @ save to __pv_offset high bits + mov r6, r3, lsr #24 @ constant for add/sub instructions + teq r3, r6, lsl #24 @ must be 16MiB aligned +THUMB( it ne @ cross section branch ) + bne __error + str r3, [r7, #LOW_OFFSET] @ save to __pv_offset low bits + b __fixup_a_pv_table +ENDPROC(__fixup_pv_table) + + .align +1: .long . + .long __pv_table_begin + .long __pv_table_end +2: .long __pv_phys_pfn_offset + .long __pv_offset + + .text +__fixup_a_pv_table: + adr r0, 3f + ldr r6, [r0] + add r6, r6, r3 + ldr r0, [r6, #HIGH_OFFSET] @ pv_offset high word + ldr r6, [r6, #LOW_OFFSET] @ pv_offset low word + mov r6, r6, lsr #24 + cmn r0, #1 +#ifdef CONFIG_THUMB2_KERNEL + moveq r0, #0x200000 @ set bit 21, mov to mvn instruction + lsls r6, #24 + beq 2f + clz r7, r6 + lsr r6, #24 + lsl r6, r7 + bic r6, #0x0080 + lsrs r7, #1 + orrcs r6, #0x0080 + orr r6, r6, r7, lsl #12 + orr r6, #0x4000 + b 2f +1: add r7, r3 + ldrh ip, [r7, #2] +ARM_BE8(rev16 ip, ip) + tst ip, #0x4000 + and ip, #0x8f00 + orrne ip, r6 @ mask in offset bits 31-24 + orreq ip, r0 @ mask in offset bits 7-0 +ARM_BE8(rev16 ip, ip) + strh ip, [r7, #2] + bne 2f + ldrh ip, [r7] +ARM_BE8(rev16 ip, ip) + bic ip, #0x20 + orr ip, ip, r0, lsr #16 +ARM_BE8(rev16 ip, ip) + strh ip, [r7] +2: cmp r4, r5 + ldrcc r7, [r4], #4 @ use branch for delay slot + bcc 1b + bx lr +#else + moveq r0, #0x400000 @ set bit 22, mov to mvn instruction + b 2f +1: ldr ip, [r7, r3] +#ifdef CONFIG_CPU_ENDIAN_BE8 + @ in BE8, we load data in BE, but instructions still in LE + bic ip, ip, #0xff000000 + tst ip, #0x000f0000 @ check the rotation field + orrne ip, ip, r6, lsl #24 @ mask in offset bits 31-24 + biceq ip, ip, #0x00004000 @ clear bit 22 + orreq ip, ip, r0, ror #8 @ mask in offset bits 7-0 +#else + bic ip, ip, #0x000000ff + tst ip, #0xf00 @ check the rotation field + orrne ip, ip, r6 @ mask in offset bits 31-24 + biceq ip, ip, #0x400000 @ clear bit 22 + orreq ip, ip, r0 @ mask in offset bits 7-0 +#endif + str ip, [r7, r3] +2: cmp r4, r5 + ldrcc r7, [r4], #4 @ use branch for delay slot + bcc 1b + ret lr +#endif +ENDPROC(__fixup_a_pv_table) + + .align +3: .long __pv_offset + +ENTRY(fixup_pv_table) + stmfd sp!, {r4 - r7, lr} + mov r3, #0 @ no offset + mov r4, r0 @ r0 = table start + add r5, r0, r1 @ r1 = table size + bl __fixup_a_pv_table + ldmfd sp!, {r4 - r7, pc} +ENDPROC(fixup_pv_table) + + .data + .align 2 + .globl __pv_phys_pfn_offset + .type __pv_phys_pfn_offset, %object +__pv_phys_pfn_offset: + .word 0 + .size __pv_phys_pfn_offset, . -__pv_phys_pfn_offset + + .globl __pv_offset + .type __pv_offset, %object +__pv_offset: + .quad 0 + .size __pv_offset, . -__pv_offset +#endif + +#include "head-common.S" |