diff options
Diffstat (limited to 'arch/mips/boot/dts/mscc/ocelot.dtsi')
| -rw-r--r-- | arch/mips/boot/dts/mscc/ocelot.dtsi | 267 |
1 files changed, 267 insertions, 0 deletions
diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi new file mode 100644 index 000000000..535a98284 --- /dev/null +++ b/arch/mips/boot/dts/mscc/ocelot.dtsi @@ -0,0 +1,267 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2017 Microsemi Corporation */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mscc,ocelot"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "mips,mips24KEc"; + device_type = "cpu"; + clocks = <&cpu_clk>; + reg = <0>; + }; + }; + + aliases { + serial0 = &uart0; + }; + + cpuintc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + cpu_clk: cpu-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <500000000>; + }; + + ahb_clk: ahb-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&cpu_clk>; + clock-div = <2>; + clock-mult = <1>; + }; + + ahb@70000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x70000000 0x2000000>; + + interrupt-parent = <&intc>; + + cpu_ctrl: syscon@0 { + compatible = "mscc,ocelot-cpu-syscon", "syscon"; + reg = <0x0 0x2c>; + }; + + intc: interrupt-controller@70 { + compatible = "mscc,ocelot-icpu-intr"; + reg = <0x70 0x70>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + uart0: serial@100000 { + pinctrl-0 = <&uart_pins>; + pinctrl-names = "default"; + compatible = "ns16550a"; + reg = <0x100000 0x20>; + interrupts = <6>; + clocks = <&ahb_clk>; + reg-io-width = <4>; + reg-shift = <2>; + + status = "disabled"; + }; + + i2c: i2c@100400 { + compatible = "mscc,ocelot-i2c", "snps,designware-i2c"; + pinctrl-0 = <&i2c_pins>; + pinctrl-names = "default"; + reg = <0x100400 0x100>, <0x198 0x8>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <8>; + clocks = <&ahb_clk>; + + status = "disabled"; + }; + + uart2: serial@100800 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + compatible = "ns16550a"; + reg = <0x100800 0x20>; + interrupts = <7>; + clocks = <&ahb_clk>; + reg-io-width = <4>; + reg-shift = <2>; + + status = "disabled"; + }; + + spi: spi@101000 { + compatible = "mscc,ocelot-spi", "snps,dw-apb-ssi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x101000 0x100>, <0x3c 0x18>; + interrupts = <9>; + clocks = <&ahb_clk>; + + status = "disabled"; + }; + + switch@1010000 { + compatible = "mscc,vsc7514-switch"; + reg = <0x1010000 0x10000>, + <0x1030000 0x10000>, + <0x1080000 0x100>, + <0x10e0000 0x10000>, + <0x11e0000 0x100>, + <0x11f0000 0x100>, + <0x1200000 0x100>, + <0x1210000 0x100>, + <0x1220000 0x100>, + <0x1230000 0x100>, + <0x1240000 0x100>, + <0x1250000 0x100>, + <0x1260000 0x100>, + <0x1270000 0x100>, + <0x1280000 0x100>, + <0x1800000 0x80000>, + <0x1880000 0x10000>, + <0x1040000 0x10000>, + <0x1050000 0x10000>, + <0x1060000 0x10000>; + reg-names = "sys", "rew", "qs", "ptp", "port0", "port1", + "port2", "port3", "port4", "port5", "port6", + "port7", "port8", "port9", "port10", "qsys", + "ana", "s0", "s1", "s2"; + interrupts = <18 21 22>; + interrupt-names = "ptp_rdy", "xtr", "inj"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port0: port@0 { + reg = <0>; + }; + port1: port@1 { + reg = <1>; + }; + port2: port@2 { + reg = <2>; + }; + port3: port@3 { + reg = <3>; + }; + port4: port@4 { + reg = <4>; + }; + port5: port@5 { + reg = <5>; + }; + port6: port@6 { + reg = <6>; + }; + port7: port@7 { + reg = <7>; + }; + port8: port@8 { + reg = <8>; + }; + port9: port@9 { + reg = <9>; + }; + port10: port@10 { + reg = <10>; + }; + }; + }; + + reset@1070008 { + compatible = "mscc,ocelot-chip-reset"; + reg = <0x1070008 0x4>; + }; + + gpio: pinctrl@1070034 { + compatible = "mscc,ocelot-pinctrl"; + reg = <0x1070034 0x68>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&gpio 0 0 22>; + interrupt-controller; + interrupts = <13>; + #interrupt-cells = <2>; + + i2c_pins: i2c-pins { + pins = "GPIO_16", "GPIO_17"; + function = "twi"; + }; + + uart_pins: uart-pins { + pins = "GPIO_6", "GPIO_7"; + function = "uart"; + }; + + uart2_pins: uart2-pins { + pins = "GPIO_12", "GPIO_13"; + function = "uart2"; + }; + + miim1: miim1 { + pins = "GPIO_14", "GPIO_15"; + function = "miim"; + }; + + }; + + mdio0: mdio@107009c { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mscc,ocelot-miim"; + reg = <0x107009c 0x24>, <0x10700f0 0x8>; + interrupts = <14>; + status = "disabled"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + phy1: ethernet-phy@1 { + reg = <1>; + }; + phy2: ethernet-phy@2 { + reg = <2>; + }; + phy3: ethernet-phy@3 { + reg = <3>; + }; + }; + + mdio1: mdio@10700c0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mscc,ocelot-miim"; + reg = <0x10700c0 0x24>; + interrupts = <15>; + pinctrl-names = "default"; + pinctrl-0 = <&miim1>; + status = "disabled"; + }; + + hsio: syscon@10d0000 { + compatible = "mscc,ocelot-hsio", "syscon", "simple-mfd"; + reg = <0x10d0000 0x10000>; + + serdes: serdes { + compatible = "mscc,vsc7514-serdes"; + #phy-cells = <2>; + }; + }; + }; +}; |