diff options
Diffstat (limited to 'arch/powerpc/boot/Makefile')
| -rw-r--r-- | arch/powerpc/boot/Makefile | 507 |
1 files changed, 507 insertions, 0 deletions
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile new file mode 100644 index 000000000..8b78eba75 --- /dev/null +++ b/arch/powerpc/boot/Makefile @@ -0,0 +1,507 @@ +# SPDX-License-Identifier: GPL-2.0 +# Makefile for making ELF bootable images for booting on CHRP +# using Open Firmware. +# +# Geert Uytterhoeven September 1997 +# +# Based on coffboot by Paul Mackerras +# Simplified for ppc64 by Todd Inglett +# +# NOTE: this code may be built for 32 bit in ELF32 format even though +# it packages a 64 bit kernel. We do this to simplify the +# bootloader and increase compatibility with OpenFirmware. +# +# To this end we need to define BOOTCC, etc, as the tools +# needed to build the 32 bit image. That's normally the same +# compiler for the rest of the kernel, with the -m32 flag added. +# To make it easier to setup a cross compiler, +# CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE +# in the toplevel makefile. + +all: $(obj)/zImage + +ifdef CROSS32_COMPILE + BOOTCC := $(CROSS32_COMPILE)gcc + BOOTAR := $(CROSS32_COMPILE)ar +else + BOOTCC := $(CC) + BOOTAR := $(AR) +endif + +BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ + -fno-strict-aliasing -O2 -msoft-float -mno-altivec -mno-vsx \ + $(call cc-option,-mno-spe) $(call cc-option,-mspe=no) \ + -pipe -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \ + $(LINUXINCLUDE) + +ifdef CONFIG_PPC64_BOOT_WRAPPER +BOOTCFLAGS += -m64 +else +BOOTCFLAGS += -m32 +endif + +BOOTCFLAGS += -isystem $(shell $(BOOTCC) -print-file-name=include) + +ifdef CONFIG_CPU_BIG_ENDIAN +BOOTCFLAGS += -mbig-endian +else +BOOTCFLAGS += -mlittle-endian +BOOTCFLAGS += $(call cc-option,-mabi=elfv2) +endif + +BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -nostdinc + +BOOTARFLAGS := -crD + +ifdef CONFIG_CC_IS_CLANG +BOOTCFLAGS += $(CLANG_FLAGS) +BOOTAFLAGS += $(CLANG_FLAGS) +endif + +ifdef CONFIG_DEBUG_INFO +BOOTCFLAGS += -g +endif + +ifeq ($(call cc-option-yn, -fstack-protector),y) +BOOTCFLAGS += -fno-stack-protector +endif + +BOOTCFLAGS += -I$(objtree)/$(obj) -I$(srctree)/$(obj) + +DTC_FLAGS ?= -p 1024 + +$(obj)/4xx.o: BOOTCFLAGS += -mcpu=405 +$(obj)/ebony.o: BOOTCFLAGS += -mcpu=440 +$(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405 +$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440 +$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440 +$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405 +$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405 +$(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405 +$(obj)/treeboot-akebono.o: BOOTCFLAGS += -mcpu=405 + +# The pre-boot decompressors pull in a lot of kernel headers and other source +# files. This creates a bit of a dependency headache since we need to copy +# these files into the build dir, fix up any includes and ensure that dependent +# files are copied in the right order. + +# these need to be seperate variables because they are copied out of different +# directories in the kernel tree. Sure you COULd merge them, but it's a +# cure-is-worse-than-disease situation. +zlib-decomp-$(CONFIG_KERNEL_GZIP) := decompress_inflate.c +zlib-$(CONFIG_KERNEL_GZIP) := inffast.c inflate.c inftrees.c +zlibheader-$(CONFIG_KERNEL_GZIP) := inffast.h inffixed.h inflate.h inftrees.h infutil.h +zliblinuxheader-$(CONFIG_KERNEL_GZIP) := zlib.h zconf.h zutil.h + +$(addprefix $(obj)/, decompress.o): \ + $(addprefix $(obj)/,$(zlib-decomp-y)) + +$(addprefix $(obj)/, $(zlib-decomp-y)): \ + $(addprefix $(obj)/,$(zliblinuxheader-y)) \ + $(addprefix $(obj)/,$(zlibheader-y)) \ + $(addprefix $(obj)/,$(zlib-y)) + +$(addprefix $(obj)/,$(zlib-y)): \ + $(addprefix $(obj)/,$(zliblinuxheader-y)) \ + $(addprefix $(obj)/,$(zlibheader-y)) + +libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c +libfdtheader := fdt.h libfdt.h libfdt_internal.h + +$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o opal.o \ + treeboot-akebono.o treeboot-currituck.o treeboot-iss4xx.o): \ + $(addprefix $(obj)/,$(libfdtheader)) + +src-wlib-y := string.S crt0.S stdio.c decompress.c main.c \ + $(libfdt) libfdt-wrapper.c \ + ns16550.c serial.c simple_alloc.c div64.S util.S \ + elf_util.c $(zlib-y) devtree.c stdlib.c \ + oflib.c ofconsole.c cuboot.c + +src-wlib-$(CONFIG_PPC_MPC52xx) += mpc52xx-psc.c +src-wlib-$(CONFIG_PPC64_BOOT_WRAPPER) += opal-calls.S opal.c +ifndef CONFIG_PPC64_BOOT_WRAPPER +src-wlib-y += crtsavres.S +endif +src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c +src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c +src-wlib-$(CONFIG_PPC_8xx) += mpc8xx.c planetcore.c fsl-soc.c +src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c +src-wlib-$(CONFIG_EMBEDDED6xx) += ugecon.c fsl-soc.c +src-wlib-$(CONFIG_CPM) += cpm-serial.c + +src-plat-y := of.c epapr.c +src-plat-$(CONFIG_40x) += fixed-head.S cuboot-hotfoot.c \ + cuboot-acadia.c \ + cuboot-kilauea.c simpleboot.c +src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \ + cuboot-bamboo.c cuboot-sam440ep.c \ + cuboot-sequoia.c cuboot-rainier.c \ + cuboot-taishan.c cuboot-katmai.c \ + cuboot-warp.c cuboot-yosemite.c \ + treeboot-iss4xx.c treeboot-currituck.c \ + treeboot-akebono.c \ + simpleboot.c fixed-head.S +src-plat-$(CONFIG_PPC_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c +src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c +src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c +src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c +src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c +src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \ + gamecube-head.S gamecube.c \ + wii-head.S wii.c holly.c \ + fixed-head.S mvme5100.c +src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c +src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c +src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c +src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S +src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S +src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S +src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c + +src-wlib := $(sort $(src-wlib-y)) +src-plat := $(sort $(src-plat-y)) +src-boot := $(src-wlib) $(src-plat) empty.c + +src-boot := $(addprefix $(obj)/, $(src-boot)) +obj-boot := $(addsuffix .o, $(basename $(src-boot))) +obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib)))) +obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat)))) +obj-plat: $(libfdt) + +quiet_cmd_copy_kern_src = COPY $@ + cmd_copy_kern_src = sed -f $(srctree)/arch/powerpc/boot/fixup-headers.sed $< > $@ + +$(addprefix $(obj)/,$(zlib-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/% + $(call cmd,copy_kern_src) + +$(addprefix $(obj)/,$(zlibheader-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/% + $(call cmd,copy_kern_src) + +$(addprefix $(obj)/,$(zliblinuxheader-y)): $(obj)/%: $(srctree)/include/linux/% + $(call cmd,copy_kern_src) + +$(addprefix $(obj)/,$(zlib-decomp-y)): $(obj)/%: $(srctree)/lib/% + $(call cmd,copy_kern_src) + +quiet_cmd_copy_libfdt = COPY $@ + cmd_copy_libfdt = cp $< $@ + +$(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/% + $(call cmd,copy_libfdt) + +$(obj)/empty.c: + $(Q)touch $@ + +$(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(srctree)/$(src)/%.S + $(Q)cp $< $@ + +clean-files := $(zlib-) $(zlibheader-) $(zliblinuxheader-) \ + $(zlib-decomp-) $(libfdt) $(libfdtheader) \ + empty.c zImage.coff.lds zImage.ps3.lds zImage.lds + +quiet_cmd_bootcc = BOOTCC $@ + cmd_bootcc = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $< + +quiet_cmd_bootas = BOOTAS $@ + cmd_bootas = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $< + +quiet_cmd_bootar = BOOTAR $@ + cmd_bootar = $(BOOTAR) $(BOOTARFLAGS) $@.$$$$ $(real-prereqs); mv $@.$$$$ $@ + +$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE + $(call if_changed_dep,bootcc) +$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE + $(Q)mkdir -p $(dir $@) + $(call if_changed_dep,bootcc) +$(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE + $(Q)mkdir -p $(dir $@) + $(call if_changed_dep,bootas) + +$(obj)/wrapper.a: $(obj-wlib) FORCE + $(call if_changed,bootar) + +hostprogs := addnote hack-coff mktree + +targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) +extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ + $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds + +dtstree := $(srctree)/$(src)/dts + +wrapper :=$(srctree)/$(src)/wrapper +wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \ + $(wrapper) FORCE + +############# +# Bits for building various flavours of zImage + +ifneq ($(CROSS32_COMPILE),) +CROSSWRAP := -C "$(CROSS32_COMPILE)" +else +ifneq ($(CROSS_COMPILE),) +CROSSWRAP := -C "$(CROSS_COMPILE)" +endif +endif + +compressor-$(CONFIG_KERNEL_GZIP) := gz +compressor-$(CONFIG_KERNEL_XZ) := xz +compressor-$(CONFIG_KERNEL_LZMA) := lzma +compressor-$(CONFIG_KERNEL_LZO) := lzo + +# args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd +quiet_cmd_wrap = WRAP $@ + cmd_wrap =$(CONFIG_SHELL) $(wrapper) -Z $(compressor-y) -c -o $@ -p $2 \ + $(CROSSWRAP) $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) \ + vmlinux + +image-$(CONFIG_PPC_PSERIES) += zImage.pseries +image-$(CONFIG_PPC_POWERNV) += zImage.pseries +image-$(CONFIG_PPC_MAPLE) += zImage.maple +image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries +image-$(CONFIG_PPC_PS3) += dtbImage.ps3 +image-$(CONFIG_PPC_CHRP) += zImage.chrp +image-$(CONFIG_PPC_EFIKA) += zImage.chrp +image-$(CONFIG_PPC_PMAC) += zImage.pmac +image-$(CONFIG_PPC_HOLLY) += dtbImage.holly +image-$(CONFIG_DEFAULT_UIMAGE) += uImage +image-$(CONFIG_EPAPR_BOOT) += zImage.epapr + +# +# Targets which embed a device tree blob +# +# Theses are default targets to build images which embed device tree blobs. +# They are only required on boards which do not have FDT support in firmware. +# Boards with newish u-boot firmware can use the uImage target above +# + +# Board ports in arch/powerpc/platform/40x/Kconfig +image-$(CONFIG_HOTFOOT) += cuImage.hotfoot +image-$(CONFIG_ACADIA) += cuImage.acadia +image-$(CONFIG_OBS600) += uImage.obs600 + +# Board ports in arch/powerpc/platform/44x/Kconfig +image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony +image-$(CONFIG_BAMBOO) += treeImage.bamboo cuImage.bamboo +image-$(CONFIG_SAM440EP) += cuImage.sam440ep +image-$(CONFIG_SEQUOIA) += cuImage.sequoia +image-$(CONFIG_RAINIER) += cuImage.rainier +image-$(CONFIG_TAISHAN) += cuImage.taishan +image-$(CONFIG_KATMAI) += cuImage.katmai +image-$(CONFIG_WARP) += cuImage.warp +image-$(CONFIG_YOSEMITE) += cuImage.yosemite +image-$(CONFIG_ISS4xx) += treeImage.iss4xx \ + treeImage.iss4xx-mpic +image-$(CONFIG_CURRITUCK) += treeImage.currituck +image-$(CONFIG_AKEBONO) += treeImage.akebono + +# Board ports in arch/powerpc/platform/8xx/Kconfig +image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads +image-$(CONFIG_MPC885ADS) += cuImage.mpc885ads +image-$(CONFIG_PPC_EP88XC) += dtbImage.ep88xc +image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \ + dtbImage.adder875-redboot + +# Board ports in arch/powerpc/platform/52xx/Kconfig +image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 +image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b +image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200 + +# Board ports in arch/powerpc/platform/82xx/Kconfig +image-$(CONFIG_MPC8272_ADS) += cuImage.mpc8272ads +image-$(CONFIG_PQ2FADS) += cuImage.pq2fads +image-$(CONFIG_EP8248E) += dtbImage.ep8248e + +# Board ports in arch/powerpc/platform/83xx/Kconfig +image-$(CONFIG_MPC832x_MDS) += cuImage.mpc832x_mds +image-$(CONFIG_MPC832x_RDB) += cuImage.mpc832x_rdb +image-$(CONFIG_MPC834x_ITX) += cuImage.mpc8349emitx \ + cuImage.mpc8349emitxgp +image-$(CONFIG_MPC834x_MDS) += cuImage.mpc834x_mds +image-$(CONFIG_MPC836x_MDS) += cuImage.mpc836x_mds +image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot + +# Board ports in arch/powerpc/platform/85xx/Kconfig +image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads +image-$(CONFIG_MPC8560_ADS) += cuImage.mpc8560ads +image-$(CONFIG_MPC85xx_CDS) += cuImage.mpc8541cds \ + cuImage.mpc8548cds_32b \ + cuImage.mpc8555cds +image-$(CONFIG_MPC85xx_MDS) += cuImage.mpc8568mds +image-$(CONFIG_MPC85xx_DS) += cuImage.mpc8544ds \ + cuImage.mpc8572ds +image-$(CONFIG_TQM8540) += cuImage.tqm8540 +image-$(CONFIG_TQM8541) += cuImage.tqm8541 +image-$(CONFIG_TQM8548) += cuImage.tqm8548 +image-$(CONFIG_TQM8555) += cuImage.tqm8555 +image-$(CONFIG_TQM8560) += cuImage.tqm8560 +image-$(CONFIG_SBC8548) += cuImage.sbc8548 +image-$(CONFIG_KSI8560) += cuImage.ksi8560 + +# Board ports in arch/powerpc/platform/86xx/Kconfig +image-$(CONFIG_MVME7100) += dtbImage.mvme7100 + +# Board ports in arch/powerpc/platform/embedded6xx/Kconfig +image-$(CONFIG_STORCENTER) += cuImage.storcenter +image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2 +image-$(CONFIG_GAMECUBE) += dtbImage.gamecube +image-$(CONFIG_WII) += dtbImage.wii +image-$(CONFIG_MVME5100) += dtbImage.mvme5100 + +# Board port in arch/powerpc/platform/amigaone/Kconfig +image-$(CONFIG_AMIGAONE) += cuImage.amigaone + +# For 32-bit powermacs, build the COFF and miboot images +# as well as the ELF images. +ifdef CONFIG_PPC32 +image-$(CONFIG_PPC_PMAC) += zImage.coff zImage.miboot +endif + +# Allow extra targets to be added to the defconfig +image-y += $(subst ",,$(CONFIG_EXTRA_TARGETS)) + +initrd- := $(patsubst zImage%, zImage.initrd%, $(image-)) +initrd-y := $(patsubst zImage%, zImage.initrd%, \ + $(patsubst dtbImage%, dtbImage.initrd%, \ + $(patsubst simpleImage%, simpleImage.initrd%, \ + $(patsubst treeImage%, treeImage.initrd%, $(image-y))))) +initrd-y := $(filter-out $(image-y), $(initrd-y)) +targets += $(image-y) $(initrd-y) +targets += $(foreach x, dtbImage uImage cuImage simpleImage treeImage, \ + $(patsubst $(x).%, dts/%.dtb, $(filter $(x).%, $(image-y)))) +targets += $(foreach x, dtbImage uImage cuImage simpleImage treeImage, \ + $(patsubst $(x).%, dts/fsl/%.dtb, $(filter $(x).%, $(image-y)))) + +$(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz + +# Don't put the ramdisk on the pattern rule; when its missing make will try +# the pattern rule with less dependencies that also matches (even with the +# hard dependency listed). +$(obj)/zImage.initrd.%: vmlinux $(wrapperbits) FORCE + $(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz) + +$(addprefix $(obj)/, $(sort $(filter zImage.%, $(image-y)))): vmlinux $(wrapperbits) FORCE + $(call if_changed,wrap,$(subst $(obj)/zImage.,,$@)) + +# dtbImage% - a dtbImage is a zImage with an embedded device tree blob +$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE + $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) + +$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE + $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb) + +# This cannot be in the root of $(src) as the zImage rule always adds a $(obj) +# prefix +$(obj)/vmlinux.strip: vmlinux + $(STRIP) -s -R .comment $< -o $@ + +$(obj)/uImage: vmlinux $(wrapperbits) FORCE + $(call if_changed,wrap,uboot) + +$(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE + $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) + +$(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE + $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb) + +$(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE + $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) + +$(obj)/cuImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE + $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb) + +$(obj)/simpleImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE + $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) + +$(obj)/simpleImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE + $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb) + +$(obj)/treeImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE + $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) + +$(obj)/treeImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE + $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb) + +# Needed for the above targets to work with dts/fsl/ files +$(obj)/dts/%.dtb: $(obj)/dts/fsl/%.dtb + @cp $< $@ + +# If there isn't a platform selected then just strip the vmlinux. +ifeq (,$(image-y)) +image-y := vmlinux.strip +endif + +$(obj)/zImage: $(addprefix $(obj)/, $(image-y)) + $(Q)rm -f $@; ln $< $@ +$(obj)/zImage.initrd: $(addprefix $(obj)/, $(initrd-y)) + $(Q)rm -f $@; ln $< $@ + +# Only install the vmlinux +install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y)) + sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" + +# Install the vmlinux and other built boot targets. +zInstall: $(CONFIGURE) $(addprefix $(obj)/, $(image-y)) + sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $^ + +PHONY += install zInstall + +# anything not in $(targets) +clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \ + zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \ + zImage.miboot zImage.pmac zImage.pseries \ + zImage.maple simpleImage.* otheros.bld + +# clean up files cached by wrapper +clean-kernel-base := vmlinux.strip vmlinux.bin +clean-kernel := $(addsuffix .gz,$(clean-kernel-base)) +clean-kernel += $(addsuffix .xz,$(clean-kernel-base)) +# If not absolute clean-files are relative to $(obj). +clean-files += $(addprefix $(objtree)/, $(clean-kernel)) + +WRAPPER_OBJDIR := /usr/lib/kernel-wrapper +WRAPPER_DTSDIR := /usr/lib/kernel-wrapper/dts +WRAPPER_BINDIR := /usr/sbin +INSTALL := install + +extra-installed := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y)) +hostprogs-installed := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs)) +wrapper-installed := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper +dts-installed := $(patsubst $(dtstree)/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(dtstree)/*.dts)) + +all-installed := $(extra-installed) $(hostprogs-installed) $(wrapper-installed) $(dts-installed) + +quiet_cmd_mkdir = MKDIR $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) + cmd_mkdir = mkdir -p $@ + +quiet_cmd_install = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,%,$@) + cmd_install = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,$(obj)/%,$@) $@ + +quiet_cmd_install_dts = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,dts/%,$@) + cmd_install_dts = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,$(srctree)/$(obj)/dts/%,$@) $@ + +quiet_cmd_install_exe = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@) + cmd_install_exe = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(obj)/%,$@) $@ + +quiet_cmd_install_wrapper = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@) + cmd_install_wrapper = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(srctree)/$(obj)/%,$@) $@ ;\ + sed -i $@ -e 's%^object=.*%object=$(WRAPPER_OBJDIR)%' \ + -e 's%^objbin=.*%objbin=$(WRAPPER_BINDIR)%' \ + + +$(DESTDIR)$(WRAPPER_OBJDIR) $(DESTDIR)$(WRAPPER_DTSDIR) $(DESTDIR)$(WRAPPER_BINDIR): + $(call cmd,mkdir) + +$(extra-installed) : $(DESTDIR)$(WRAPPER_OBJDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_OBJDIR) + $(call cmd,install) + +$(hostprogs-installed) : $(DESTDIR)$(WRAPPER_BINDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_BINDIR) + $(call cmd,install_exe) + +$(dts-installed) : $(DESTDIR)$(WRAPPER_DTSDIR)/% : $(srctree)/$(obj)/dts/% | $(DESTDIR)$(WRAPPER_DTSDIR) + $(call cmd,install_dts) + +$(wrapper-installed): $(DESTDIR)$(WRAPPER_BINDIR) $(srctree)/$(obj)/wrapper | $(DESTDIR)$(WRAPPER_BINDIR) + $(call cmd,install_wrapper) + +$(obj)/bootwrapper_install: $(all-installed) |