diff options
Diffstat (limited to 'arch/powerpc/platforms/powermac')
19 files changed, 12525 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/powermac/Kconfig b/arch/powerpc/platforms/powermac/Kconfig new file mode 100644 index 000000000..c02d8c503 --- /dev/null +++ b/arch/powerpc/platforms/powermac/Kconfig @@ -0,0 +1,32 @@ +# SPDX-License-Identifier: GPL-2.0 +config PPC_PMAC + bool "Apple PowerMac based machines" + depends on PPC_BOOK3S && CPU_BIG_ENDIAN + select MPIC + select FORCE_PCI + select PPC_INDIRECT_PCI if PPC32 + select PPC_MPC106 if PPC32 + select PPC_NATIVE + select ZONE_DMA if PPC32 + default y + +config PPC_PMAC64 + bool + depends on PPC_PMAC && PPC64 + select MPIC + select U3_DART + select MPIC_U3_HT_IRQS + select GENERIC_TBSYNC + select PPC_970_NAP + default y + +config PPC_PMAC32_PSURGE + bool "Support for powersurge upgrade cards" if EXPERT + depends on SMP && PPC32 && PPC_PMAC + select PPC_SMP_MUXED_IPI + default y + help + The powersurge cpu boards can be used in the generation + of powermacs that have a socket for an upgradeable cpu card, + including the 7500, 8500, 9500, 9600. Support exists for + both dual and quad socket upgrade cards. diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile new file mode 100644 index 000000000..cf85f0662 --- /dev/null +++ b/arch/powerpc/platforms/powermac/Makefile @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0 +CFLAGS_bootx_init.o += -fPIC +CFLAGS_bootx_init.o += -fno-stack-protector + +KASAN_SANITIZE_bootx_init.o := n + +ifdef CONFIG_KASAN +CFLAGS_bootx_init.o += -DDISABLE_BRANCH_PROFILING +endif + +ifdef CONFIG_FUNCTION_TRACER +# Do not trace early boot code +CFLAGS_REMOVE_bootx_init.o = $(CC_FLAGS_FTRACE) +endif + +obj-y += pic.o setup.o time.o feature.o pci.o \ + sleep.o low_i2c.o cache.o pfunc_core.o \ + pfunc_base.o udbg_scc.o udbg_adb.o +obj-$(CONFIG_PMAC_BACKLIGHT) += backlight.o +# CONFIG_NVRAM is an arch. independent tristate symbol, for pmac32 we really +# need this to be a bool. Cheat here and pretend CONFIG_NVRAM=m is really +# CONFIG_NVRAM=y +obj-$(CONFIG_NVRAM:m=y) += nvram.o +obj-$(CONFIG_PPC32) += bootx_init.o +obj-$(CONFIG_SMP) += smp.o diff --git a/arch/powerpc/platforms/powermac/backlight.c b/arch/powerpc/platforms/powermac/backlight.c new file mode 100644 index 000000000..32224cb48 --- /dev/null +++ b/arch/powerpc/platforms/powermac/backlight.c @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Miscellaneous procedures for dealing with the PowerMac hardware. + * Contains support for the backlight. + * + * Copyright (C) 2000 Benjamin Herrenschmidt + * Copyright (C) 2006 Michael Hanselmann <linux-kernel@hansmi.ch> + * + */ + +#include <linux/kernel.h> +#include <linux/fb.h> +#include <linux/backlight.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <linux/atomic.h> +#include <linux/export.h> +#include <asm/prom.h> +#include <asm/backlight.h> + +#define OLD_BACKLIGHT_MAX 15 + +static void pmac_backlight_key_worker(struct work_struct *work); +static void pmac_backlight_set_legacy_worker(struct work_struct *work); + +static DECLARE_WORK(pmac_backlight_key_work, pmac_backlight_key_worker); +static DECLARE_WORK(pmac_backlight_set_legacy_work, pmac_backlight_set_legacy_worker); + +/* Although these variables are used in interrupt context, it makes no sense to + * protect them. No user is able to produce enough key events per second and + * notice the errors that might happen. + */ +static int pmac_backlight_key_queued; +static int pmac_backlight_set_legacy_queued; + +/* The via-pmu code allows the backlight to be grabbed, in which case the + * in-kernel control of the brightness needs to be disabled. This should + * only be used by really old PowerBooks. + */ +static atomic_t kernel_backlight_disabled = ATOMIC_INIT(0); + +/* Protect the pmac_backlight variable below. + You should hold this lock when using the pmac_backlight pointer to + prevent its potential removal. */ +DEFINE_MUTEX(pmac_backlight_mutex); + +/* Main backlight storage + * + * Backlight drivers in this variable are required to have the "ops" + * attribute set and to have an update_status function. + * + * We can only store one backlight here, but since Apple laptops have only one + * internal display, it doesn't matter. Other backlight drivers can be used + * independently. + * + */ +struct backlight_device *pmac_backlight; + +int pmac_has_backlight_type(const char *type) +{ + struct device_node* bk_node = of_find_node_by_name(NULL, "backlight"); + + if (bk_node) { + const char *prop = of_get_property(bk_node, + "backlight-control", NULL); + if (prop && strncmp(prop, type, strlen(type)) == 0) { + of_node_put(bk_node); + return 1; + } + of_node_put(bk_node); + } + + return 0; +} + +int pmac_backlight_curve_lookup(struct fb_info *info, int value) +{ + int level = (FB_BACKLIGHT_LEVELS - 1); + + if (info && info->bl_dev) { + int i, max = 0; + + /* Look for biggest value */ + for (i = 0; i < FB_BACKLIGHT_LEVELS; i++) + max = max((int)info->bl_curve[i], max); + + /* Look for nearest value */ + for (i = 0; i < FB_BACKLIGHT_LEVELS; i++) { + int diff = abs(info->bl_curve[i] - value); + if (diff < max) { + max = diff; + level = i; + } + } + + } + + return level; +} + +static void pmac_backlight_key_worker(struct work_struct *work) +{ + if (atomic_read(&kernel_backlight_disabled)) + return; + + mutex_lock(&pmac_backlight_mutex); + if (pmac_backlight) { + struct backlight_properties *props; + int brightness; + + props = &pmac_backlight->props; + + brightness = props->brightness + + ((pmac_backlight_key_queued?-1:1) * + (props->max_brightness / 15)); + + if (brightness < 0) + brightness = 0; + else if (brightness > props->max_brightness) + brightness = props->max_brightness; + + props->brightness = brightness; + backlight_update_status(pmac_backlight); + } + mutex_unlock(&pmac_backlight_mutex); +} + +/* This function is called in interrupt context */ +void pmac_backlight_key(int direction) +{ + if (atomic_read(&kernel_backlight_disabled)) + return; + + /* we can receive multiple interrupts here, but the scheduled work + * will run only once, with the last value + */ + pmac_backlight_key_queued = direction; + schedule_work(&pmac_backlight_key_work); +} + +static int __pmac_backlight_set_legacy_brightness(int brightness) +{ + int error = -ENXIO; + + mutex_lock(&pmac_backlight_mutex); + if (pmac_backlight) { + struct backlight_properties *props; + + props = &pmac_backlight->props; + props->brightness = brightness * + (props->max_brightness + 1) / + (OLD_BACKLIGHT_MAX + 1); + + if (props->brightness > props->max_brightness) + props->brightness = props->max_brightness; + else if (props->brightness < 0) + props->brightness = 0; + + backlight_update_status(pmac_backlight); + + error = 0; + } + mutex_unlock(&pmac_backlight_mutex); + + return error; +} + +static void pmac_backlight_set_legacy_worker(struct work_struct *work) +{ + if (atomic_read(&kernel_backlight_disabled)) + return; + + __pmac_backlight_set_legacy_brightness(pmac_backlight_set_legacy_queued); +} + +/* This function is called in interrupt context */ +void pmac_backlight_set_legacy_brightness_pmu(int brightness) { + if (atomic_read(&kernel_backlight_disabled)) + return; + + pmac_backlight_set_legacy_queued = brightness; + schedule_work(&pmac_backlight_set_legacy_work); +} + +int pmac_backlight_set_legacy_brightness(int brightness) +{ + return __pmac_backlight_set_legacy_brightness(brightness); +} + +int pmac_backlight_get_legacy_brightness(void) +{ + int result = -ENXIO; + + mutex_lock(&pmac_backlight_mutex); + if (pmac_backlight) { + struct backlight_properties *props; + + props = &pmac_backlight->props; + + result = props->brightness * + (OLD_BACKLIGHT_MAX + 1) / + (props->max_brightness + 1); + } + mutex_unlock(&pmac_backlight_mutex); + + return result; +} + +void pmac_backlight_disable(void) +{ + atomic_inc(&kernel_backlight_disabled); +} + +void pmac_backlight_enable(void) +{ + atomic_dec(&kernel_backlight_disabled); +} + +EXPORT_SYMBOL_GPL(pmac_backlight); +EXPORT_SYMBOL_GPL(pmac_backlight_mutex); +EXPORT_SYMBOL_GPL(pmac_has_backlight_type); diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c new file mode 100644 index 000000000..9d4ecd292 --- /dev/null +++ b/arch/powerpc/platforms/powermac/bootx_init.c @@ -0,0 +1,594 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Early boot support code for BootX bootloader + * + * Copyright (C) 2005 Ben. Herrenschmidt (benh@kernel.crashing.org) + */ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/init.h> +#include <generated/utsrelease.h> +#include <asm/sections.h> +#include <asm/prom.h> +#include <asm/page.h> +#include <asm/bootx.h> +#include <asm/btext.h> +#include <asm/io.h> +#include <asm/setup.h> + +#undef DEBUG +#define SET_BOOT_BAT + +#ifdef DEBUG +#define DBG(fmt...) do { bootx_printf(fmt); } while(0) +#else +#define DBG(fmt...) do { } while(0) +#endif + +extern void __start(unsigned long r3, unsigned long r4, unsigned long r5); + +static unsigned long __initdata bootx_dt_strbase; +static unsigned long __initdata bootx_dt_strend; +static unsigned long __initdata bootx_node_chosen; +static boot_infos_t * __initdata bootx_info; +static char __initdata bootx_disp_path[256]; + +/* Is boot-info compatible ? */ +#define BOOT_INFO_IS_COMPATIBLE(bi) \ + ((bi)->compatible_version <= BOOT_INFO_VERSION) +#define BOOT_INFO_IS_V2_COMPATIBLE(bi) ((bi)->version >= 2) +#define BOOT_INFO_IS_V4_COMPATIBLE(bi) ((bi)->version >= 4) + +#ifdef CONFIG_BOOTX_TEXT +static void __init bootx_printf(const char *format, ...) +{ + const char *p, *q, *s; + va_list args; + unsigned long v; + + va_start(args, format); + for (p = format; *p != 0; p = q) { + for (q = p; *q != 0 && *q != '\n' && *q != '%'; ++q) + ; + if (q > p) + btext_drawtext(p, q - p); + if (*q == 0) + break; + if (*q == '\n') { + ++q; + btext_flushline(); + btext_drawstring("\r\n"); + btext_flushline(); + continue; + } + ++q; + if (*q == 0) + break; + switch (*q) { + case 's': + ++q; + s = va_arg(args, const char *); + if (s == NULL) + s = "<NULL>"; + btext_drawstring(s); + break; + case 'x': + ++q; + v = va_arg(args, unsigned long); + btext_drawhex(v); + break; + } + } + va_end(args); +} +#else /* CONFIG_BOOTX_TEXT */ +static void __init bootx_printf(const char *format, ...) {} +#endif /* CONFIG_BOOTX_TEXT */ + +static void * __init bootx_early_getprop(unsigned long base, + unsigned long node, + char *prop) +{ + struct bootx_dt_node *np = (struct bootx_dt_node *)(base + node); + u32 *ppp = &np->properties; + + while(*ppp) { + struct bootx_dt_prop *pp = + (struct bootx_dt_prop *)(base + *ppp); + + if (strcmp((char *)((unsigned long)pp->name + base), + prop) == 0) { + return (void *)((unsigned long)pp->value + base); + } + ppp = &pp->next; + } + return NULL; +} + +#define dt_push_token(token, mem) \ + do { \ + *(mem) = ALIGN(*(mem),4); \ + *((u32 *)*(mem)) = token; \ + *(mem) += 4; \ + } while(0) + +static unsigned long __init bootx_dt_find_string(char *str) +{ + char *s, *os; + + s = os = (char *)bootx_dt_strbase; + s += 4; + while (s < (char *)bootx_dt_strend) { + if (strcmp(s, str) == 0) + return s - os; + s += strlen(s) + 1; + } + return 0; +} + +static void __init bootx_dt_add_prop(char *name, void *data, int size, + unsigned long *mem_end) +{ + unsigned long soff = bootx_dt_find_string(name); + if (data == NULL) + size = 0; + if (soff == 0) { + bootx_printf("WARNING: Can't find string index for <%s>\n", + name); + return; + } + if (size > 0x20000) { + bootx_printf("WARNING: ignoring large property "); + bootx_printf("%s length 0x%x\n", name, size); + return; + } + dt_push_token(OF_DT_PROP, mem_end); + dt_push_token(size, mem_end); + dt_push_token(soff, mem_end); + + /* push property content */ + if (size && data) { + memcpy((void *)*mem_end, data, size); + *mem_end = ALIGN(*mem_end + size, 4); + } +} + +static void __init bootx_add_chosen_props(unsigned long base, + unsigned long *mem_end) +{ + u32 val; + + bootx_dt_add_prop("linux,bootx", NULL, 0, mem_end); + + if (bootx_info->kernelParamsOffset) { + char *args = (char *)((unsigned long)bootx_info) + + bootx_info->kernelParamsOffset; + bootx_dt_add_prop("bootargs", args, strlen(args) + 1, mem_end); + } + if (bootx_info->ramDisk) { + val = ((unsigned long)bootx_info) + bootx_info->ramDisk; + bootx_dt_add_prop("linux,initrd-start", &val, 4, mem_end); + val += bootx_info->ramDiskSize; + bootx_dt_add_prop("linux,initrd-end", &val, 4, mem_end); + } + if (strlen(bootx_disp_path)) + bootx_dt_add_prop("linux,stdout-path", bootx_disp_path, + strlen(bootx_disp_path) + 1, mem_end); +} + +static void __init bootx_add_display_props(unsigned long base, + unsigned long *mem_end, + int has_real_node) +{ + boot_infos_t *bi = bootx_info; + u32 tmp; + + if (has_real_node) { + bootx_dt_add_prop("linux,boot-display", NULL, 0, mem_end); + bootx_dt_add_prop("linux,opened", NULL, 0, mem_end); + } else + bootx_dt_add_prop("linux,bootx-noscreen", NULL, 0, mem_end); + + tmp = bi->dispDeviceDepth; + bootx_dt_add_prop("linux,bootx-depth", &tmp, 4, mem_end); + tmp = bi->dispDeviceRect[2] - bi->dispDeviceRect[0]; + bootx_dt_add_prop("linux,bootx-width", &tmp, 4, mem_end); + tmp = bi->dispDeviceRect[3] - bi->dispDeviceRect[1]; + bootx_dt_add_prop("linux,bootx-height", &tmp, 4, mem_end); + tmp = bi->dispDeviceRowBytes; + bootx_dt_add_prop("linux,bootx-linebytes", &tmp, 4, mem_end); + tmp = (u32)bi->dispDeviceBase; + if (tmp == 0) + tmp = (u32)bi->logicalDisplayBase; + tmp += bi->dispDeviceRect[1] * bi->dispDeviceRowBytes; + tmp += bi->dispDeviceRect[0] * ((bi->dispDeviceDepth + 7) / 8); + bootx_dt_add_prop("linux,bootx-addr", &tmp, 4, mem_end); +} + +static void __init bootx_dt_add_string(char *s, unsigned long *mem_end) +{ + unsigned int l = strlen(s) + 1; + memcpy((void *)*mem_end, s, l); + bootx_dt_strend = *mem_end = *mem_end + l; +} + +static void __init bootx_scan_dt_build_strings(unsigned long base, + unsigned long node, + unsigned long *mem_end) +{ + struct bootx_dt_node *np = (struct bootx_dt_node *)(base + node); + u32 *cpp, *ppp = &np->properties; + unsigned long soff; + char *namep; + + /* Keep refs to known nodes */ + namep = np->full_name ? (char *)(base + np->full_name) : NULL; + if (namep == NULL) { + bootx_printf("Node without a full name !\n"); + namep = ""; + } + DBG("* strings: %s\n", namep); + + if (!strcmp(namep, "/chosen")) { + DBG(" detected /chosen ! adding properties names !\n"); + bootx_dt_add_string("linux,bootx", mem_end); + bootx_dt_add_string("linux,stdout-path", mem_end); + bootx_dt_add_string("linux,initrd-start", mem_end); + bootx_dt_add_string("linux,initrd-end", mem_end); + bootx_dt_add_string("bootargs", mem_end); + bootx_node_chosen = node; + } + if (node == bootx_info->dispDeviceRegEntryOffset) { + DBG(" detected display ! adding properties names !\n"); + bootx_dt_add_string("linux,boot-display", mem_end); + bootx_dt_add_string("linux,opened", mem_end); + strlcpy(bootx_disp_path, namep, sizeof(bootx_disp_path)); + } + + /* get and store all property names */ + while (*ppp) { + struct bootx_dt_prop *pp = + (struct bootx_dt_prop *)(base + *ppp); + + namep = pp->name ? (char *)(base + pp->name) : NULL; + if (namep == NULL || strcmp(namep, "name") == 0) + goto next; + /* get/create string entry */ + soff = bootx_dt_find_string(namep); + if (soff == 0) + bootx_dt_add_string(namep, mem_end); + next: + ppp = &pp->next; + } + + /* do all our children */ + cpp = &np->child; + while(*cpp) { + np = (struct bootx_dt_node *)(base + *cpp); + bootx_scan_dt_build_strings(base, *cpp, mem_end); + cpp = &np->sibling; + } +} + +static void __init bootx_scan_dt_build_struct(unsigned long base, + unsigned long node, + unsigned long *mem_end) +{ + struct bootx_dt_node *np = (struct bootx_dt_node *)(base + node); + u32 *cpp, *ppp = &np->properties; + char *namep, *p, *ep, *lp; + int l; + + dt_push_token(OF_DT_BEGIN_NODE, mem_end); + + /* get the node's full name */ + namep = np->full_name ? (char *)(base + np->full_name) : NULL; + if (namep == NULL) + namep = ""; + l = strlen(namep); + + DBG("* struct: %s\n", namep); + + /* Fixup an Apple bug where they have bogus \0 chars in the + * middle of the path in some properties, and extract + * the unit name (everything after the last '/'). + */ + memcpy((void *)*mem_end, namep, l + 1); + namep = (char *)*mem_end; + for (lp = p = namep, ep = namep + l; p < ep; p++) { + if (*p == '/') + lp = namep; + else if (*p != 0) + *lp++ = *p; + } + *lp = 0; + *mem_end = ALIGN((unsigned long)lp + 1, 4); + + /* get and store all properties */ + while (*ppp) { + struct bootx_dt_prop *pp = + (struct bootx_dt_prop *)(base + *ppp); + + namep = pp->name ? (char *)(base + pp->name) : NULL; + /* Skip "name" */ + if (namep == NULL || !strcmp(namep, "name")) + goto next; + /* Skip "bootargs" in /chosen too as we replace it */ + if (node == bootx_node_chosen && !strcmp(namep, "bootargs")) + goto next; + + /* push property head */ + bootx_dt_add_prop(namep, + pp->value ? (void *)(base + pp->value): NULL, + pp->length, mem_end); + next: + ppp = &pp->next; + } + + if (node == bootx_node_chosen) { + bootx_add_chosen_props(base, mem_end); + if (bootx_info->dispDeviceRegEntryOffset == 0) + bootx_add_display_props(base, mem_end, 0); + } + else if (node == bootx_info->dispDeviceRegEntryOffset) + bootx_add_display_props(base, mem_end, 1); + + /* do all our children */ + cpp = &np->child; + while(*cpp) { + np = (struct bootx_dt_node *)(base + *cpp); + bootx_scan_dt_build_struct(base, *cpp, mem_end); + cpp = &np->sibling; + } + + dt_push_token(OF_DT_END_NODE, mem_end); +} + +static unsigned long __init bootx_flatten_dt(unsigned long start) +{ + boot_infos_t *bi = bootx_info; + unsigned long mem_start, mem_end; + struct boot_param_header *hdr; + unsigned long base; + u64 *rsvmap; + + /* Start using memory after the big blob passed by BootX, get + * some space for the header + */ + mem_start = mem_end = ALIGN(((unsigned long)bi) + start, 4); + DBG("Boot params header at: %x\n", mem_start); + hdr = (struct boot_param_header *)mem_start; + mem_end += sizeof(struct boot_param_header); + rsvmap = (u64 *)(ALIGN(mem_end, 8)); + hdr->off_mem_rsvmap = ((unsigned long)rsvmap) - mem_start; + mem_end = ((unsigned long)rsvmap) + 8 * sizeof(u64); + + /* Get base of tree */ + base = ((unsigned long)bi) + bi->deviceTreeOffset; + + /* Build string array */ + DBG("Building string array at: %x\n", mem_end); + DBG("Device Tree Base=%x\n", base); + bootx_dt_strbase = mem_end; + mem_end += 4; + bootx_dt_strend = mem_end; + bootx_scan_dt_build_strings(base, 4, &mem_end); + /* Add some strings */ + bootx_dt_add_string("linux,bootx-noscreen", &mem_end); + bootx_dt_add_string("linux,bootx-depth", &mem_end); + bootx_dt_add_string("linux,bootx-width", &mem_end); + bootx_dt_add_string("linux,bootx-height", &mem_end); + bootx_dt_add_string("linux,bootx-linebytes", &mem_end); + bootx_dt_add_string("linux,bootx-addr", &mem_end); + /* Wrap up strings */ + hdr->off_dt_strings = bootx_dt_strbase - mem_start; + hdr->dt_strings_size = bootx_dt_strend - bootx_dt_strbase; + + /* Build structure */ + mem_end = ALIGN(mem_end, 16); + DBG("Building device tree structure at: %x\n", mem_end); + hdr->off_dt_struct = mem_end - mem_start; + bootx_scan_dt_build_struct(base, 4, &mem_end); + dt_push_token(OF_DT_END, &mem_end); + + /* Finish header */ + hdr->boot_cpuid_phys = 0; + hdr->magic = OF_DT_HEADER; + hdr->totalsize = mem_end - mem_start; + hdr->version = OF_DT_VERSION; + /* Version 16 is not backward compatible */ + hdr->last_comp_version = 0x10; + + /* Reserve the whole thing and copy the reserve map in, we + * also bump mem_reserve_cnt to cause further reservations to + * fail since it's too late. + */ + mem_end = ALIGN(mem_end, PAGE_SIZE); + DBG("End of boot params: %x\n", mem_end); + rsvmap[0] = mem_start; + rsvmap[1] = mem_end; + if (bootx_info->ramDisk) { + rsvmap[2] = ((unsigned long)bootx_info) + bootx_info->ramDisk; + rsvmap[3] = rsvmap[2] + bootx_info->ramDiskSize; + rsvmap[4] = 0; + rsvmap[5] = 0; + } else { + rsvmap[2] = 0; + rsvmap[3] = 0; + } + + return (unsigned long)hdr; +} + + +#ifdef CONFIG_BOOTX_TEXT +static void __init btext_welcome(boot_infos_t *bi) +{ + unsigned long flags; + unsigned long pvr; + + bootx_printf("Welcome to Linux, kernel " UTS_RELEASE "\n"); + bootx_printf("\nlinked at : 0x%x", KERNELBASE); + bootx_printf("\nframe buffer at : 0x%x", bi->dispDeviceBase); + bootx_printf(" (phys), 0x%x", bi->logicalDisplayBase); + bootx_printf(" (log)"); + bootx_printf("\nklimit : 0x%x",(unsigned long)klimit); + bootx_printf("\nboot_info at : 0x%x", bi); + __asm__ __volatile__ ("mfmsr %0" : "=r" (flags)); + bootx_printf("\nMSR : 0x%x", flags); + __asm__ __volatile__ ("mfspr %0, 287" : "=r" (pvr)); + bootx_printf("\nPVR : 0x%x", pvr); + pvr >>= 16; + if (pvr > 1) { + __asm__ __volatile__ ("mfspr %0, 1008" : "=r" (flags)); + bootx_printf("\nHID0 : 0x%x", flags); + } + if (pvr == 8 || pvr == 12 || pvr == 0x800c) { + __asm__ __volatile__ ("mfspr %0, 1019" : "=r" (flags)); + bootx_printf("\nICTC : 0x%x", flags); + } +#ifdef DEBUG + bootx_printf("\n\n"); + bootx_printf("bi->deviceTreeOffset : 0x%x\n", + bi->deviceTreeOffset); + bootx_printf("bi->deviceTreeSize : 0x%x\n", + bi->deviceTreeSize); +#endif + bootx_printf("\n\n"); +} +#endif /* CONFIG_BOOTX_TEXT */ + +void __init bootx_init(unsigned long r3, unsigned long r4) +{ + boot_infos_t *bi = (boot_infos_t *) r4; + unsigned long hdr; + unsigned long space; + unsigned long ptr; + char *model; + unsigned long offset = reloc_offset(); + + reloc_got2(offset); + + bootx_info = bi; + + /* We haven't cleared any bss at this point, make sure + * what we need is initialized + */ + bootx_dt_strbase = bootx_dt_strend = 0; + bootx_node_chosen = 0; + bootx_disp_path[0] = 0; + + if (!BOOT_INFO_IS_V2_COMPATIBLE(bi)) + bi->logicalDisplayBase = bi->dispDeviceBase; + + /* Fixup depth 16 -> 15 as that's what MacOS calls 16bpp */ + if (bi->dispDeviceDepth == 16) + bi->dispDeviceDepth = 15; + + +#ifdef CONFIG_BOOTX_TEXT + ptr = (unsigned long)bi->logicalDisplayBase; + ptr += bi->dispDeviceRect[1] * bi->dispDeviceRowBytes; + ptr += bi->dispDeviceRect[0] * ((bi->dispDeviceDepth + 7) / 8); + btext_setup_display(bi->dispDeviceRect[2] - bi->dispDeviceRect[0], + bi->dispDeviceRect[3] - bi->dispDeviceRect[1], + bi->dispDeviceDepth, bi->dispDeviceRowBytes, + (unsigned long)bi->logicalDisplayBase); + btext_clearscreen(); + btext_flushscreen(); +#endif /* CONFIG_BOOTX_TEXT */ + + /* + * Test if boot-info is compatible. Done only in config + * CONFIG_BOOTX_TEXT since there is nothing much we can do + * with an incompatible version, except display a message + * and eventually hang the processor... + * + * I'll try to keep enough of boot-info compatible in the + * future to always allow display of this message; + */ + if (!BOOT_INFO_IS_COMPATIBLE(bi)) { + bootx_printf(" !!! WARNING - Incompatible version" + " of BootX !!!\n\n\n"); + for (;;) + ; + } + if (bi->architecture != BOOT_ARCH_PCI) { + bootx_printf(" !!! WARNING - Unsupported machine" + " architecture !\n"); + for (;;) + ; + } + +#ifdef CONFIG_BOOTX_TEXT + btext_welcome(bi); +#endif + + /* New BootX enters kernel with MMU off, i/os are not allowed + * here. This hack will have been done by the boostrap anyway. + */ + if (bi->version < 4) { + /* + * XXX If this is an iMac, turn off the USB controller. + */ + model = (char *) bootx_early_getprop(r4 + bi->deviceTreeOffset, + 4, "model"); + if (model + && (strcmp(model, "iMac,1") == 0 + || strcmp(model, "PowerMac1,1") == 0)) { + bootx_printf("iMac,1 detected, shutting down USB\n"); + out_le32((unsigned __iomem *)0x80880008, 1); /* XXX */ + } + } + + /* Get a pointer that points above the device tree, args, ramdisk, + * etc... to use for generating the flattened tree + */ + if (bi->version < 5) { + space = bi->deviceTreeOffset + bi->deviceTreeSize; + if (bi->ramDisk >= space) + space = bi->ramDisk + bi->ramDiskSize; + } else + space = bi->totalParamsSize; + + bootx_printf("Total space used by parameters & ramdisk: 0x%x\n", space); + + /* New BootX will have flushed all TLBs and enters kernel with + * MMU switched OFF, so this should not be useful anymore. + */ + if (bi->version < 4) { + unsigned long x __maybe_unused; + + bootx_printf("Touching pages...\n"); + + /* + * Touch each page to make sure the PTEs for them + * are in the hash table - the aim is to try to avoid + * getting DSI exceptions while copying the kernel image. + */ + for (ptr = ((unsigned long) &_stext) & PAGE_MASK; + ptr < (unsigned long)bi + space; ptr += PAGE_SIZE) + x = *(volatile unsigned long *)ptr; + } + + /* Ok, now we need to generate a flattened device-tree to pass + * to the kernel + */ + bootx_printf("Preparing boot params...\n"); + + hdr = bootx_flatten_dt(space); + +#ifdef CONFIG_BOOTX_TEXT +#ifdef SET_BOOT_BAT + bootx_printf("Preparing BAT...\n"); + btext_prepare_BAT(); +#else + btext_unmap(); +#endif +#endif + + reloc_got2(-offset); + + __start(hdr, KERNELBASE + offset, 0); +} diff --git a/arch/powerpc/platforms/powermac/cache.S b/arch/powerpc/platforms/powermac/cache.S new file mode 100644 index 000000000..b8ae56e9f --- /dev/null +++ b/arch/powerpc/platforms/powermac/cache.S @@ -0,0 +1,356 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * This file contains low-level cache management functions + * used for sleep and CPU speed changes on Apple machines. + * (In fact the only thing that is Apple-specific is that we assume + * that we can read from ROM at physical address 0xfff00000.) + * + * Copyright (C) 2004 Paul Mackerras (paulus@samba.org) and + * Benjamin Herrenschmidt (benh@kernel.crashing.org) + */ + +#include <asm/processor.h> +#include <asm/ppc_asm.h> +#include <asm/cputable.h> +#include <asm/feature-fixups.h> + +/* + * Flush and disable all data caches (dL1, L2, L3). This is used + * when going to sleep, when doing a PMU based cpufreq transition, + * or when "offlining" a CPU on SMP machines. This code is over + * paranoid, but I've had enough issues with various CPU revs and + * bugs that I decided it was worth being over cautious + */ + +_GLOBAL(flush_disable_caches) +#ifndef CONFIG_PPC_BOOK3S_32 + blr +#else +BEGIN_FTR_SECTION + b flush_disable_745x +END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) +BEGIN_FTR_SECTION + b flush_disable_75x +END_FTR_SECTION_IFSET(CPU_FTR_L2CR) + b __flush_disable_L1 + +/* This is the code for G3 and 74[01]0 */ +flush_disable_75x: + mflr r10 + + /* Turn off EE and DR in MSR */ + mfmsr r11 + rlwinm r0,r11,0,~MSR_EE + rlwinm r0,r0,0,~MSR_DR + sync + mtmsr r0 + isync + + /* Stop DST streams */ +BEGIN_FTR_SECTION + PPC_DSSALL + sync +END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) + + /* Stop DPM */ + mfspr r8,SPRN_HID0 /* Save SPRN_HID0 in r8 */ + rlwinm r4,r8,0,12,10 /* Turn off HID0[DPM] */ + sync + mtspr SPRN_HID0,r4 /* Disable DPM */ + sync + + /* Disp-flush L1. We have a weird problem here that I never + * totally figured out. On 750FX, using the ROM for the flush + * results in a non-working flush. We use that workaround for + * now until I finally understand what's going on. --BenH + */ + + /* ROM base by default */ + lis r4,0xfff0 + mfpvr r3 + srwi r3,r3,16 + cmplwi cr0,r3,0x7000 + bne+ 1f + /* RAM base on 750FX */ + li r4,0 +1: li r4,0x4000 + mtctr r4 +1: lwz r0,0(r4) + addi r4,r4,32 + bdnz 1b + sync + isync + + /* Disable / invalidate / enable L1 data */ + mfspr r3,SPRN_HID0 + rlwinm r3,r3,0,~(HID0_DCE | HID0_ICE) + mtspr SPRN_HID0,r3 + sync + isync + ori r3,r3,(HID0_DCE|HID0_DCI|HID0_ICE|HID0_ICFI) + sync + isync + mtspr SPRN_HID0,r3 + xori r3,r3,(HID0_DCI|HID0_ICFI) + mtspr SPRN_HID0,r3 + sync + + /* Get the current enable bit of the L2CR into r4 */ + mfspr r5,SPRN_L2CR + /* Set to data-only (pre-745x bit) */ + oris r3,r5,L2CR_L2DO@h + b 2f + /* When disabling L2, code must be in L1 */ + .balign 32 +1: mtspr SPRN_L2CR,r3 +3: sync + isync + b 1f +2: b 3f +3: sync + isync + b 1b +1: /* disp-flush L2. The interesting thing here is that the L2 can be + * up to 2Mb ... so using the ROM, we'll end up wrapping back to memory + * but that is probbaly fine. We disp-flush over 4Mb to be safe + */ + lis r4,2 + mtctr r4 + lis r4,0xfff0 +1: lwz r0,0(r4) + addi r4,r4,32 + bdnz 1b + sync + isync + lis r4,2 + mtctr r4 + lis r4,0xfff0 +1: dcbf 0,r4 + addi r4,r4,32 + bdnz 1b + sync + isync + + /* now disable L2 */ + rlwinm r5,r5,0,~L2CR_L2E + b 2f + /* When disabling L2, code must be in L1 */ + .balign 32 +1: mtspr SPRN_L2CR,r5 +3: sync + isync + b 1f +2: b 3f +3: sync + isync + b 1b +1: sync + isync + /* Invalidate L2. This is pre-745x, we clear the L2I bit ourselves */ + oris r4,r5,L2CR_L2I@h + mtspr SPRN_L2CR,r4 + sync + isync + + /* Wait for the invalidation to complete */ +1: mfspr r3,SPRN_L2CR + rlwinm. r0,r3,0,31,31 + bne 1b + + /* Clear L2I */ + xoris r4,r4,L2CR_L2I@h + sync + mtspr SPRN_L2CR,r4 + sync + + /* now disable the L1 data cache */ + mfspr r0,SPRN_HID0 + rlwinm r0,r0,0,~(HID0_DCE|HID0_ICE) + mtspr SPRN_HID0,r0 + sync + isync + + /* Restore HID0[DPM] to whatever it was before */ + sync + mfspr r0,SPRN_HID0 + rlwimi r0,r8,0,11,11 /* Turn back HID0[DPM] */ + mtspr SPRN_HID0,r0 + sync + + /* restore DR and EE */ + sync + mtmsr r11 + isync + + mtlr r10 + blr +_ASM_NOKPROBE_SYMBOL(flush_disable_75x) + +/* This code is for 745x processors */ +flush_disable_745x: + /* Turn off EE and DR in MSR */ + mfmsr r11 + rlwinm r0,r11,0,~MSR_EE + rlwinm r0,r0,0,~MSR_DR + sync + mtmsr r0 + isync + + /* Stop prefetch streams */ + PPC_DSSALL + sync + + /* Disable L2 prefetching */ + mfspr r0,SPRN_MSSCR0 + rlwinm r0,r0,0,0,29 + mtspr SPRN_MSSCR0,r0 + sync + isync + lis r4,0 + dcbf 0,r4 + dcbf 0,r4 + dcbf 0,r4 + dcbf 0,r4 + dcbf 0,r4 + dcbf 0,r4 + dcbf 0,r4 + dcbf 0,r4 + + /* Due to a bug with the HW flush on some CPU revs, we occasionally + * experience data corruption. I'm adding a displacement flush along + * with a dcbf loop over a few Mb to "help". The problem isn't totally + * fixed by this in theory, but at least, in practice, I couldn't reproduce + * it even with a big hammer... + */ + + lis r4,0x0002 + mtctr r4 + li r4,0 +1: + lwz r0,0(r4) + addi r4,r4,32 /* Go to start of next cache line */ + bdnz 1b + isync + + /* Now, flush the first 4MB of memory */ + lis r4,0x0002 + mtctr r4 + li r4,0 + sync +1: + dcbf 0,r4 + addi r4,r4,32 /* Go to start of next cache line */ + bdnz 1b + + /* Flush and disable the L1 data cache */ + mfspr r6,SPRN_LDSTCR + lis r3,0xfff0 /* read from ROM for displacement flush */ + li r4,0xfe /* start with only way 0 unlocked */ + li r5,128 /* 128 lines in each way */ +1: mtctr r5 + rlwimi r6,r4,0,24,31 + mtspr SPRN_LDSTCR,r6 + sync + isync +2: lwz r0,0(r3) /* touch each cache line */ + addi r3,r3,32 + bdnz 2b + rlwinm r4,r4,1,24,30 /* move on to the next way */ + ori r4,r4,1 + cmpwi r4,0xff /* all done? */ + bne 1b + /* now unlock the L1 data cache */ + li r4,0 + rlwimi r6,r4,0,24,31 + sync + mtspr SPRN_LDSTCR,r6 + sync + isync + + /* Flush the L2 cache using the hardware assist */ + mfspr r3,SPRN_L2CR + cmpwi r3,0 /* check if it is enabled first */ + bge 4f + oris r0,r3,(L2CR_L2IO_745x|L2CR_L2DO_745x)@h + b 2f + /* When disabling/locking L2, code must be in L1 */ + .balign 32 +1: mtspr SPRN_L2CR,r0 /* lock the L2 cache */ +3: sync + isync + b 1f +2: b 3f +3: sync + isync + b 1b +1: sync + isync + ori r0,r3,L2CR_L2HWF_745x + sync + mtspr SPRN_L2CR,r0 /* set the hardware flush bit */ +3: mfspr r0,SPRN_L2CR /* wait for it to go to 0 */ + andi. r0,r0,L2CR_L2HWF_745x + bne 3b + sync + rlwinm r3,r3,0,~L2CR_L2E + b 2f + /* When disabling L2, code must be in L1 */ + .balign 32 +1: mtspr SPRN_L2CR,r3 /* disable the L2 cache */ +3: sync + isync + b 1f +2: b 3f +3: sync + isync + b 1b +1: sync + isync + oris r4,r3,L2CR_L2I@h + mtspr SPRN_L2CR,r4 + sync + isync +1: mfspr r4,SPRN_L2CR + andis. r0,r4,L2CR_L2I@h + bne 1b + sync + +BEGIN_FTR_SECTION + /* Flush the L3 cache using the hardware assist */ +4: mfspr r3,SPRN_L3CR + cmpwi r3,0 /* check if it is enabled */ + bge 6f + oris r0,r3,L3CR_L3IO@h + ori r0,r0,L3CR_L3DO + sync + mtspr SPRN_L3CR,r0 /* lock the L3 cache */ + sync + isync + ori r0,r0,L3CR_L3HWF + sync + mtspr SPRN_L3CR,r0 /* set the hardware flush bit */ +5: mfspr r0,SPRN_L3CR /* wait for it to go to zero */ + andi. r0,r0,L3CR_L3HWF + bne 5b + rlwinm r3,r3,0,~L3CR_L3E + sync + mtspr SPRN_L3CR,r3 /* disable the L3 cache */ + sync + ori r4,r3,L3CR_L3I + mtspr SPRN_L3CR,r4 +1: mfspr r4,SPRN_L3CR + andi. r0,r4,L3CR_L3I + bne 1b + sync +END_FTR_SECTION_IFSET(CPU_FTR_L3CR) + +6: mfspr r0,SPRN_HID0 /* now disable the L1 data cache */ + rlwinm r0,r0,0,~HID0_DCE + mtspr SPRN_HID0,r0 + sync + isync + mtmsr r11 /* restore DR and EE */ + isync + blr +_ASM_NOKPROBE_SYMBOL(flush_disable_745x) +#endif /* CONFIG_PPC_BOOK3S_32 */ diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c new file mode 100644 index 000000000..5c77b9a24 --- /dev/null +++ b/arch/powerpc/platforms/powermac/feature.c @@ -0,0 +1,3020 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 1996-2001 Paul Mackerras (paulus@cs.anu.edu.au) + * Ben. Herrenschmidt (benh@kernel.crashing.org) + * + * TODO: + * + * - Replace mdelay with some schedule loop if possible + * - Shorten some obfuscated delays on some routines (like modem + * power) + * - Refcount some clocks (see darwin) + * - Split split split... + */ +#include <linux/types.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/spinlock.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <linux/ioport.h> +#include <linux/export.h> +#include <linux/pci.h> +#include <asm/sections.h> +#include <asm/errno.h> +#include <asm/ohare.h> +#include <asm/heathrow.h> +#include <asm/keylargo.h> +#include <asm/uninorth.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/pmac_feature.h> +#include <asm/dbdma.h> +#include <asm/pci-bridge.h> +#include <asm/pmac_low_i2c.h> + +#undef DEBUG_FEATURE + +#ifdef DEBUG_FEATURE +#define DBG(fmt...) printk(KERN_DEBUG fmt) +#else +#define DBG(fmt...) +#endif + +#ifdef CONFIG_PPC_BOOK3S_32 +extern int powersave_lowspeed; +#endif + +extern int powersave_nap; +extern struct device_node *k2_skiplist[2]; + +/* + * We use a single global lock to protect accesses. Each driver has + * to take care of its own locking + */ +DEFINE_RAW_SPINLOCK(feature_lock); + +#define LOCK(flags) raw_spin_lock_irqsave(&feature_lock, flags); +#define UNLOCK(flags) raw_spin_unlock_irqrestore(&feature_lock, flags); + + +/* + * Instance of some macio stuffs + */ +struct macio_chip macio_chips[MAX_MACIO_CHIPS]; + +struct macio_chip *macio_find(struct device_node *child, int type) +{ + while(child) { + int i; + + for (i=0; i < MAX_MACIO_CHIPS && macio_chips[i].of_node; i++) + if (child == macio_chips[i].of_node && + (!type || macio_chips[i].type == type)) + return &macio_chips[i]; + child = child->parent; + } + return NULL; +} +EXPORT_SYMBOL_GPL(macio_find); + +static const char *macio_names[] = +{ + "Unknown", + "Grand Central", + "OHare", + "OHareII", + "Heathrow", + "Gatwick", + "Paddington", + "Keylargo", + "Pangea", + "Intrepid", + "K2", + "Shasta", +}; + + +struct device_node *uninorth_node; +u32 __iomem *uninorth_base; + +static u32 uninorth_rev; +static int uninorth_maj; +static void __iomem *u3_ht_base; + +/* + * For each motherboard family, we have a table of functions pointers + * that handle the various features. + */ + +typedef long (*feature_call)(struct device_node *node, long param, long value); + +struct feature_table_entry { + unsigned int selector; + feature_call function; +}; + +struct pmac_mb_def +{ + const char* model_string; + const char* model_name; + int model_id; + struct feature_table_entry* features; + unsigned long board_flags; +}; +static struct pmac_mb_def pmac_mb; + +/* + * Here are the chip specific feature functions + */ + +static inline int simple_feature_tweak(struct device_node *node, int type, + int reg, u32 mask, int value) +{ + struct macio_chip* macio; + unsigned long flags; + + macio = macio_find(node, type); + if (!macio) + return -ENODEV; + LOCK(flags); + if (value) + MACIO_BIS(reg, mask); + else + MACIO_BIC(reg, mask); + (void)MACIO_IN32(reg); + UNLOCK(flags); + + return 0; +} + +#ifndef CONFIG_PPC64 + +static long ohare_htw_scc_enable(struct device_node *node, long param, + long value) +{ + struct macio_chip* macio; + unsigned long chan_mask; + unsigned long fcr; + unsigned long flags; + int htw, trans; + unsigned long rmask; + + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + if (of_node_name_eq(node, "ch-a")) + chan_mask = MACIO_FLAG_SCCA_ON; + else if (of_node_name_eq(node, "ch-b")) + chan_mask = MACIO_FLAG_SCCB_ON; + else + return -ENODEV; + + htw = (macio->type == macio_heathrow || macio->type == macio_paddington + || macio->type == macio_gatwick); + /* On these machines, the HRW_SCC_TRANS_EN_N bit mustn't be touched */ + trans = (pmac_mb.model_id != PMAC_TYPE_YOSEMITE && + pmac_mb.model_id != PMAC_TYPE_YIKES); + if (value) { +#ifdef CONFIG_ADB_PMU + if ((param & 0xfff) == PMAC_SCC_IRDA) + pmu_enable_irled(1); +#endif /* CONFIG_ADB_PMU */ + LOCK(flags); + fcr = MACIO_IN32(OHARE_FCR); + /* Check if scc cell need enabling */ + if (!(fcr & OH_SCC_ENABLE)) { + fcr |= OH_SCC_ENABLE; + if (htw) { + /* Side effect: this will also power up the + * modem, but it's too messy to figure out on which + * ports this controls the transceiver and on which + * it controls the modem + */ + if (trans) + fcr &= ~HRW_SCC_TRANS_EN_N; + MACIO_OUT32(OHARE_FCR, fcr); + fcr |= (rmask = HRW_RESET_SCC); + MACIO_OUT32(OHARE_FCR, fcr); + } else { + fcr |= (rmask = OH_SCC_RESET); + MACIO_OUT32(OHARE_FCR, fcr); + } + UNLOCK(flags); + (void)MACIO_IN32(OHARE_FCR); + mdelay(15); + LOCK(flags); + fcr &= ~rmask; + MACIO_OUT32(OHARE_FCR, fcr); + } + if (chan_mask & MACIO_FLAG_SCCA_ON) + fcr |= OH_SCCA_IO; + if (chan_mask & MACIO_FLAG_SCCB_ON) + fcr |= OH_SCCB_IO; + MACIO_OUT32(OHARE_FCR, fcr); + macio->flags |= chan_mask; + UNLOCK(flags); + if (param & PMAC_SCC_FLAG_XMON) + macio->flags |= MACIO_FLAG_SCC_LOCKED; + } else { + if (macio->flags & MACIO_FLAG_SCC_LOCKED) + return -EPERM; + LOCK(flags); + fcr = MACIO_IN32(OHARE_FCR); + if (chan_mask & MACIO_FLAG_SCCA_ON) + fcr &= ~OH_SCCA_IO; + if (chan_mask & MACIO_FLAG_SCCB_ON) + fcr &= ~OH_SCCB_IO; + MACIO_OUT32(OHARE_FCR, fcr); + if ((fcr & (OH_SCCA_IO | OH_SCCB_IO)) == 0) { + fcr &= ~OH_SCC_ENABLE; + if (htw && trans) + fcr |= HRW_SCC_TRANS_EN_N; + MACIO_OUT32(OHARE_FCR, fcr); + } + macio->flags &= ~(chan_mask); + UNLOCK(flags); + mdelay(10); +#ifdef CONFIG_ADB_PMU + if ((param & 0xfff) == PMAC_SCC_IRDA) + pmu_enable_irled(0); +#endif /* CONFIG_ADB_PMU */ + } + return 0; +} + +static long ohare_floppy_enable(struct device_node *node, long param, + long value) +{ + return simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_FLOPPY_ENABLE, value); +} + +static long ohare_mesh_enable(struct device_node *node, long param, long value) +{ + return simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_MESH_ENABLE, value); +} + +static long ohare_ide_enable(struct device_node *node, long param, long value) +{ + switch(param) { + case 0: + /* For some reason, setting the bit in set_initial_features() + * doesn't stick. I'm still investigating... --BenH. + */ + if (value) + simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_IOBUS_ENABLE, 1); + return simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_IDE0_ENABLE, value); + case 1: + return simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_BAY_IDE_ENABLE, value); + default: + return -ENODEV; + } +} + +static long ohare_ide_reset(struct device_node *node, long param, long value) +{ + switch(param) { + case 0: + return simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_IDE0_RESET_N, !value); + case 1: + return simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_IDE1_RESET_N, !value); + default: + return -ENODEV; + } +} + +static long ohare_sleep_state(struct device_node *node, long param, long value) +{ + struct macio_chip* macio = &macio_chips[0]; + + if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0) + return -EPERM; + if (value == 1) { + MACIO_BIC(OHARE_FCR, OH_IOBUS_ENABLE); + } else if (value == 0) { + MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); + } + + return 0; +} + +static long heathrow_modem_enable(struct device_node *node, long param, + long value) +{ + struct macio_chip* macio; + u8 gpio; + unsigned long flags; + + macio = macio_find(node, macio_unknown); + if (!macio) + return -ENODEV; + gpio = MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1; + if (!value) { + LOCK(flags); + MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio); + UNLOCK(flags); + (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); + mdelay(250); + } + if (pmac_mb.model_id != PMAC_TYPE_YOSEMITE && + pmac_mb.model_id != PMAC_TYPE_YIKES) { + LOCK(flags); + if (value) + MACIO_BIC(HEATHROW_FCR, HRW_SCC_TRANS_EN_N); + else + MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N); + UNLOCK(flags); + (void)MACIO_IN32(HEATHROW_FCR); + mdelay(250); + } + if (value) { + LOCK(flags); + MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1); + (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); LOCK(flags); + MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio); + (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); LOCK(flags); + MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1); + (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); + } + return 0; +} + +static long heathrow_floppy_enable(struct device_node *node, long param, + long value) +{ + return simple_feature_tweak(node, macio_unknown, + HEATHROW_FCR, + HRW_SWIM_ENABLE|HRW_BAY_FLOPPY_ENABLE, + value); +} + +static long heathrow_mesh_enable(struct device_node *node, long param, + long value) +{ + struct macio_chip* macio; + unsigned long flags; + + macio = macio_find(node, macio_unknown); + if (!macio) + return -ENODEV; + LOCK(flags); + /* Set clear mesh cell enable */ + if (value) + MACIO_BIS(HEATHROW_FCR, HRW_MESH_ENABLE); + else + MACIO_BIC(HEATHROW_FCR, HRW_MESH_ENABLE); + (void)MACIO_IN32(HEATHROW_FCR); + udelay(10); + /* Set/Clear termination power */ + if (value) + MACIO_BIC(HEATHROW_MBCR, 0x04000000); + else + MACIO_BIS(HEATHROW_MBCR, 0x04000000); + (void)MACIO_IN32(HEATHROW_MBCR); + udelay(10); + UNLOCK(flags); + + return 0; +} + +static long heathrow_ide_enable(struct device_node *node, long param, + long value) +{ + switch(param) { + case 0: + return simple_feature_tweak(node, macio_unknown, + HEATHROW_FCR, HRW_IDE0_ENABLE, value); + case 1: + return simple_feature_tweak(node, macio_unknown, + HEATHROW_FCR, HRW_BAY_IDE_ENABLE, value); + default: + return -ENODEV; + } +} + +static long heathrow_ide_reset(struct device_node *node, long param, + long value) +{ + switch(param) { + case 0: + return simple_feature_tweak(node, macio_unknown, + HEATHROW_FCR, HRW_IDE0_RESET_N, !value); + case 1: + return simple_feature_tweak(node, macio_unknown, + HEATHROW_FCR, HRW_IDE1_RESET_N, !value); + default: + return -ENODEV; + } +} + +static long heathrow_bmac_enable(struct device_node *node, long param, + long value) +{ + struct macio_chip* macio; + unsigned long flags; + + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + if (value) { + LOCK(flags); + MACIO_BIS(HEATHROW_FCR, HRW_BMAC_IO_ENABLE); + MACIO_BIS(HEATHROW_FCR, HRW_BMAC_RESET); + UNLOCK(flags); + (void)MACIO_IN32(HEATHROW_FCR); + mdelay(10); + LOCK(flags); + MACIO_BIC(HEATHROW_FCR, HRW_BMAC_RESET); + UNLOCK(flags); + (void)MACIO_IN32(HEATHROW_FCR); + mdelay(10); + } else { + LOCK(flags); + MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE); + UNLOCK(flags); + } + return 0; +} + +static long heathrow_sound_enable(struct device_node *node, long param, + long value) +{ + struct macio_chip* macio; + unsigned long flags; + + /* B&W G3 and Yikes don't support that properly (the + * sound appear to never come back after being shut down). + */ + if (pmac_mb.model_id == PMAC_TYPE_YOSEMITE || + pmac_mb.model_id == PMAC_TYPE_YIKES) + return 0; + + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + if (value) { + LOCK(flags); + MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); + MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N); + UNLOCK(flags); + (void)MACIO_IN32(HEATHROW_FCR); + } else { + LOCK(flags); + MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N); + MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); + UNLOCK(flags); + } + return 0; +} + +static u32 save_fcr[6]; +static u32 save_mbcr; +static struct dbdma_regs save_dbdma[13]; +static struct dbdma_regs save_alt_dbdma[13]; + +static void dbdma_save(struct macio_chip *macio, struct dbdma_regs *save) +{ + int i; + + /* Save state & config of DBDMA channels */ + for (i = 0; i < 13; i++) { + volatile struct dbdma_regs __iomem * chan = (void __iomem *) + (macio->base + ((0x8000+i*0x100)>>2)); + save[i].cmdptr_hi = in_le32(&chan->cmdptr_hi); + save[i].cmdptr = in_le32(&chan->cmdptr); + save[i].intr_sel = in_le32(&chan->intr_sel); + save[i].br_sel = in_le32(&chan->br_sel); + save[i].wait_sel = in_le32(&chan->wait_sel); + } +} + +static void dbdma_restore(struct macio_chip *macio, struct dbdma_regs *save) +{ + int i; + + /* Save state & config of DBDMA channels */ + for (i = 0; i < 13; i++) { + volatile struct dbdma_regs __iomem * chan = (void __iomem *) + (macio->base + ((0x8000+i*0x100)>>2)); + out_le32(&chan->control, (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16); + while (in_le32(&chan->status) & ACTIVE) + mb(); + out_le32(&chan->cmdptr_hi, save[i].cmdptr_hi); + out_le32(&chan->cmdptr, save[i].cmdptr); + out_le32(&chan->intr_sel, save[i].intr_sel); + out_le32(&chan->br_sel, save[i].br_sel); + out_le32(&chan->wait_sel, save[i].wait_sel); + } +} + +static void heathrow_sleep(struct macio_chip *macio, int secondary) +{ + if (secondary) { + dbdma_save(macio, save_alt_dbdma); + save_fcr[2] = MACIO_IN32(0x38); + save_fcr[3] = MACIO_IN32(0x3c); + } else { + dbdma_save(macio, save_dbdma); + save_fcr[0] = MACIO_IN32(0x38); + save_fcr[1] = MACIO_IN32(0x3c); + save_mbcr = MACIO_IN32(0x34); + /* Make sure sound is shut down */ + MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N); + MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); + /* This seems to be necessary as well or the fan + * keeps coming up and battery drains fast */ + MACIO_BIC(HEATHROW_FCR, HRW_IOBUS_ENABLE); + MACIO_BIC(HEATHROW_FCR, HRW_IDE0_RESET_N); + /* Make sure eth is down even if module or sleep + * won't work properly */ + MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE | HRW_BMAC_RESET); + } + /* Make sure modem is shut down */ + MACIO_OUT8(HRW_GPIO_MODEM_RESET, + MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1); + MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N); + MACIO_BIC(HEATHROW_FCR, OH_SCCA_IO|OH_SCCB_IO|HRW_SCC_ENABLE); + + /* Let things settle */ + (void)MACIO_IN32(HEATHROW_FCR); +} + +static void heathrow_wakeup(struct macio_chip *macio, int secondary) +{ + if (secondary) { + MACIO_OUT32(0x38, save_fcr[2]); + (void)MACIO_IN32(0x38); + mdelay(1); + MACIO_OUT32(0x3c, save_fcr[3]); + (void)MACIO_IN32(0x38); + mdelay(10); + dbdma_restore(macio, save_alt_dbdma); + } else { + MACIO_OUT32(0x38, save_fcr[0] | HRW_IOBUS_ENABLE); + (void)MACIO_IN32(0x38); + mdelay(1); + MACIO_OUT32(0x3c, save_fcr[1]); + (void)MACIO_IN32(0x38); + mdelay(1); + MACIO_OUT32(0x34, save_mbcr); + (void)MACIO_IN32(0x38); + mdelay(10); + dbdma_restore(macio, save_dbdma); + } +} + +static long heathrow_sleep_state(struct device_node *node, long param, + long value) +{ + if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0) + return -EPERM; + if (value == 1) { + if (macio_chips[1].type == macio_gatwick) + heathrow_sleep(&macio_chips[0], 1); + heathrow_sleep(&macio_chips[0], 0); + } else if (value == 0) { + heathrow_wakeup(&macio_chips[0], 0); + if (macio_chips[1].type == macio_gatwick) + heathrow_wakeup(&macio_chips[0], 1); + } + return 0; +} + +static long core99_scc_enable(struct device_node *node, long param, long value) +{ + struct macio_chip* macio; + unsigned long flags; + unsigned long chan_mask; + u32 fcr; + + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + if (of_node_name_eq(node, "ch-a")) + chan_mask = MACIO_FLAG_SCCA_ON; + else if (of_node_name_eq(node, "ch-b")) + chan_mask = MACIO_FLAG_SCCB_ON; + else + return -ENODEV; + + if (value) { + int need_reset_scc = 0; + int need_reset_irda = 0; + + LOCK(flags); + fcr = MACIO_IN32(KEYLARGO_FCR0); + /* Check if scc cell need enabling */ + if (!(fcr & KL0_SCC_CELL_ENABLE)) { + fcr |= KL0_SCC_CELL_ENABLE; + need_reset_scc = 1; + } + if (chan_mask & MACIO_FLAG_SCCA_ON) { + fcr |= KL0_SCCA_ENABLE; + /* Don't enable line drivers for I2S modem */ + if ((param & 0xfff) == PMAC_SCC_I2S1) + fcr &= ~KL0_SCC_A_INTF_ENABLE; + else + fcr |= KL0_SCC_A_INTF_ENABLE; + } + if (chan_mask & MACIO_FLAG_SCCB_ON) { + fcr |= KL0_SCCB_ENABLE; + /* Perform irda specific inits */ + if ((param & 0xfff) == PMAC_SCC_IRDA) { + fcr &= ~KL0_SCC_B_INTF_ENABLE; + fcr |= KL0_IRDA_ENABLE; + fcr |= KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE; + fcr |= KL0_IRDA_SOURCE1_SEL; + fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0); + fcr &= ~(KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND); + need_reset_irda = 1; + } else + fcr |= KL0_SCC_B_INTF_ENABLE; + } + MACIO_OUT32(KEYLARGO_FCR0, fcr); + macio->flags |= chan_mask; + if (need_reset_scc) { + MACIO_BIS(KEYLARGO_FCR0, KL0_SCC_RESET); + (void)MACIO_IN32(KEYLARGO_FCR0); + UNLOCK(flags); + mdelay(15); + LOCK(flags); + MACIO_BIC(KEYLARGO_FCR0, KL0_SCC_RESET); + } + if (need_reset_irda) { + MACIO_BIS(KEYLARGO_FCR0, KL0_IRDA_RESET); + (void)MACIO_IN32(KEYLARGO_FCR0); + UNLOCK(flags); + mdelay(15); + LOCK(flags); + MACIO_BIC(KEYLARGO_FCR0, KL0_IRDA_RESET); + } + UNLOCK(flags); + if (param & PMAC_SCC_FLAG_XMON) + macio->flags |= MACIO_FLAG_SCC_LOCKED; + } else { + if (macio->flags & MACIO_FLAG_SCC_LOCKED) + return -EPERM; + LOCK(flags); + fcr = MACIO_IN32(KEYLARGO_FCR0); + if (chan_mask & MACIO_FLAG_SCCA_ON) + fcr &= ~KL0_SCCA_ENABLE; + if (chan_mask & MACIO_FLAG_SCCB_ON) { + fcr &= ~KL0_SCCB_ENABLE; + /* Perform irda specific clears */ + if ((param & 0xfff) == PMAC_SCC_IRDA) { + fcr &= ~KL0_IRDA_ENABLE; + fcr &= ~(KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE); + fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0); + fcr &= ~(KL0_IRDA_SOURCE1_SEL|KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND); + } + } + MACIO_OUT32(KEYLARGO_FCR0, fcr); + if ((fcr & (KL0_SCCA_ENABLE | KL0_SCCB_ENABLE)) == 0) { + fcr &= ~KL0_SCC_CELL_ENABLE; + MACIO_OUT32(KEYLARGO_FCR0, fcr); + } + macio->flags &= ~(chan_mask); + UNLOCK(flags); + mdelay(10); + } + return 0; +} + +static long +core99_modem_enable(struct device_node *node, long param, long value) +{ + struct macio_chip* macio; + u8 gpio; + unsigned long flags; + + /* Hack for internal USB modem */ + if (node == NULL) { + if (macio_chips[0].type != macio_keylargo) + return -ENODEV; + node = macio_chips[0].of_node; + } + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + gpio = MACIO_IN8(KL_GPIO_MODEM_RESET); + gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE; + gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA; + + if (!value) { + LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); + UNLOCK(flags); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + mdelay(250); + } + LOCK(flags); + if (value) { + MACIO_BIC(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); + UNLOCK(flags); + (void)MACIO_IN32(KEYLARGO_FCR2); + mdelay(250); + } else { + MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); + UNLOCK(flags); + } + if (value) { + LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); + } + return 0; +} + +static long +pangea_modem_enable(struct device_node *node, long param, long value) +{ + struct macio_chip* macio; + u8 gpio; + unsigned long flags; + + /* Hack for internal USB modem */ + if (node == NULL) { + if (macio_chips[0].type != macio_pangea && + macio_chips[0].type != macio_intrepid) + return -ENODEV; + node = macio_chips[0].of_node; + } + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + gpio = MACIO_IN8(KL_GPIO_MODEM_RESET); + gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE; + gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA; + + if (!value) { + LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); + UNLOCK(flags); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + mdelay(250); + } + LOCK(flags); + if (value) { + MACIO_OUT8(KL_GPIO_MODEM_POWER, + KEYLARGO_GPIO_OUTPUT_ENABLE); + UNLOCK(flags); + (void)MACIO_IN32(KEYLARGO_FCR2); + mdelay(250); + } else { + MACIO_OUT8(KL_GPIO_MODEM_POWER, + KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA); + UNLOCK(flags); + } + if (value) { + LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); + } + return 0; +} + +static long +core99_ata100_enable(struct device_node *node, long value) +{ + unsigned long flags; + struct pci_dev *pdev = NULL; + u8 pbus, pid; + int rc; + + if (uninorth_rev < 0x24) + return -ENODEV; + + LOCK(flags); + if (value) + UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100); + else + UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100); + (void)UN_IN(UNI_N_CLOCK_CNTL); + UNLOCK(flags); + udelay(20); + + if (value) { + if (pci_device_from_OF_node(node, &pbus, &pid) == 0) + pdev = pci_get_domain_bus_and_slot(0, pbus, pid); + if (pdev == NULL) + return 0; + rc = pci_enable_device(pdev); + if (rc == 0) + pci_set_master(pdev); + pci_dev_put(pdev); + if (rc) + return rc; + } + return 0; +} + +static long +core99_ide_enable(struct device_node *node, long param, long value) +{ + /* Bus ID 0 to 2 are KeyLargo based IDE, busID 3 is U2 + * based ata-100 + */ + switch(param) { + case 0: + return simple_feature_tweak(node, macio_unknown, + KEYLARGO_FCR1, KL1_EIDE0_ENABLE, value); + case 1: + return simple_feature_tweak(node, macio_unknown, + KEYLARGO_FCR1, KL1_EIDE1_ENABLE, value); + case 2: + return simple_feature_tweak(node, macio_unknown, + KEYLARGO_FCR1, KL1_UIDE_ENABLE, value); + case 3: + return core99_ata100_enable(node, value); + default: + return -ENODEV; + } +} + +static long +core99_ide_reset(struct device_node *node, long param, long value) +{ + switch(param) { + case 0: + return simple_feature_tweak(node, macio_unknown, + KEYLARGO_FCR1, KL1_EIDE0_RESET_N, !value); + case 1: + return simple_feature_tweak(node, macio_unknown, + KEYLARGO_FCR1, KL1_EIDE1_RESET_N, !value); + case 2: + return simple_feature_tweak(node, macio_unknown, + KEYLARGO_FCR1, KL1_UIDE_RESET_N, !value); + default: + return -ENODEV; + } +} + +static long +core99_gmac_enable(struct device_node *node, long param, long value) +{ + unsigned long flags; + + LOCK(flags); + if (value) + UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC); + else + UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC); + (void)UN_IN(UNI_N_CLOCK_CNTL); + UNLOCK(flags); + udelay(20); + + return 0; +} + +static long +core99_gmac_phy_reset(struct device_node *node, long param, long value) +{ + unsigned long flags; + struct macio_chip *macio; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo && macio->type != macio_pangea && + macio->type != macio_intrepid) + return -ENODEV; + + LOCK(flags); + MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, KEYLARGO_GPIO_OUTPUT_ENABLE); + (void)MACIO_IN8(KL_GPIO_ETH_PHY_RESET); + UNLOCK(flags); + mdelay(10); + LOCK(flags); + MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, /*KEYLARGO_GPIO_OUTPUT_ENABLE | */ + KEYLARGO_GPIO_OUTOUT_DATA); + UNLOCK(flags); + mdelay(10); + + return 0; +} + +static long +core99_sound_chip_enable(struct device_node *node, long param, long value) +{ + struct macio_chip* macio; + unsigned long flags; + + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + + /* Do a better probe code, screamer G4 desktops & + * iMacs can do that too, add a recalibrate in + * the driver as well + */ + if (pmac_mb.model_id == PMAC_TYPE_PISMO || + pmac_mb.model_id == PMAC_TYPE_TITANIUM) { + LOCK(flags); + if (value) + MACIO_OUT8(KL_GPIO_SOUND_POWER, + KEYLARGO_GPIO_OUTPUT_ENABLE | + KEYLARGO_GPIO_OUTOUT_DATA); + else + MACIO_OUT8(KL_GPIO_SOUND_POWER, + KEYLARGO_GPIO_OUTPUT_ENABLE); + (void)MACIO_IN8(KL_GPIO_SOUND_POWER); + UNLOCK(flags); + } + return 0; +} + +static long +core99_airport_enable(struct device_node *node, long param, long value) +{ + struct macio_chip* macio; + unsigned long flags; + int state; + + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + + /* Hint: we allow passing of macio itself for the sake of the + * sleep code + */ + if (node != macio->of_node && + (!node->parent || node->parent != macio->of_node)) + return -ENODEV; + state = (macio->flags & MACIO_FLAG_AIRPORT_ON) != 0; + if (value == state) + return 0; + if (value) { + /* This code is a reproduction of OF enable-cardslot + * and init-wireless methods, slightly hacked until + * I got it working. + */ + LOCK(flags); + MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 5); + (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf); + UNLOCK(flags); + mdelay(10); + LOCK(flags); + MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 4); + (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf); + UNLOCK(flags); + + mdelay(10); + + LOCK(flags); + MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16); + (void)MACIO_IN32(KEYLARGO_FCR2); + udelay(10); + MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xb, 0); + (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xb); + udelay(10); + MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xa, 0x28); + (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xa); + udelay(10); + MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xd, 0x28); + (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xd); + udelay(10); + MACIO_OUT8(KEYLARGO_GPIO_0+0xd, 0x28); + (void)MACIO_IN8(KEYLARGO_GPIO_0+0xd); + udelay(10); + MACIO_OUT8(KEYLARGO_GPIO_0+0xe, 0x28); + (void)MACIO_IN8(KEYLARGO_GPIO_0+0xe); + UNLOCK(flags); + udelay(10); + MACIO_OUT32(0x1c000, 0); + mdelay(1); + MACIO_OUT8(0x1a3e0, 0x41); + (void)MACIO_IN8(0x1a3e0); + udelay(10); + LOCK(flags); + MACIO_BIS(KEYLARGO_FCR2, KL2_CARDSEL_16); + (void)MACIO_IN32(KEYLARGO_FCR2); + UNLOCK(flags); + mdelay(100); + + macio->flags |= MACIO_FLAG_AIRPORT_ON; + } else { + LOCK(flags); + MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16); + (void)MACIO_IN32(KEYLARGO_FCR2); + MACIO_OUT8(KL_GPIO_AIRPORT_0, 0); + MACIO_OUT8(KL_GPIO_AIRPORT_1, 0); + MACIO_OUT8(KL_GPIO_AIRPORT_2, 0); + MACIO_OUT8(KL_GPIO_AIRPORT_3, 0); + MACIO_OUT8(KL_GPIO_AIRPORT_4, 0); + (void)MACIO_IN8(KL_GPIO_AIRPORT_4); + UNLOCK(flags); + + macio->flags &= ~MACIO_FLAG_AIRPORT_ON; + } + return 0; +} + +#ifdef CONFIG_SMP +static long +core99_reset_cpu(struct device_node *node, long param, long value) +{ + unsigned int reset_io = 0; + unsigned long flags; + struct macio_chip *macio; + struct device_node *np; + const int dflt_reset_lines[] = { KL_GPIO_RESET_CPU0, + KL_GPIO_RESET_CPU1, + KL_GPIO_RESET_CPU2, + KL_GPIO_RESET_CPU3 }; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo) + return -ENODEV; + + for_each_of_cpu_node(np) { + const u32 *num = of_get_property(np, "reg", NULL); + const u32 *rst = of_get_property(np, "soft-reset", NULL); + if (num == NULL || rst == NULL) + continue; + if (param == *num) { + reset_io = *rst; + break; + } + } + if (np == NULL || reset_io == 0) + reset_io = dflt_reset_lines[param]; + + LOCK(flags); + MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE); + (void)MACIO_IN8(reset_io); + udelay(1); + MACIO_OUT8(reset_io, 0); + (void)MACIO_IN8(reset_io); + UNLOCK(flags); + + return 0; +} +#endif /* CONFIG_SMP */ + +static long +core99_usb_enable(struct device_node *node, long param, long value) +{ + struct macio_chip *macio; + unsigned long flags; + const char *prop; + int number; + u32 reg; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo && macio->type != macio_pangea && + macio->type != macio_intrepid) + return -ENODEV; + + prop = of_get_property(node, "AAPL,clock-id", NULL); + if (!prop) + return -ENODEV; + if (strncmp(prop, "usb0u048", 8) == 0) + number = 0; + else if (strncmp(prop, "usb1u148", 8) == 0) + number = 2; + else if (strncmp(prop, "usb2u248", 8) == 0) + number = 4; + else + return -ENODEV; + + /* Sorry for the brute-force locking, but this is only used during + * sleep and the timing seem to be critical + */ + LOCK(flags); + if (value) { + /* Turn ON */ + if (number == 0) { + MACIO_BIC(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1)); + (void)MACIO_IN32(KEYLARGO_FCR0); + UNLOCK(flags); + mdelay(1); + LOCK(flags); + MACIO_BIS(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE); + } else if (number == 2) { + MACIO_BIC(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1)); + UNLOCK(flags); + (void)MACIO_IN32(KEYLARGO_FCR0); + mdelay(1); + LOCK(flags); + MACIO_BIS(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE); + } else if (number == 4) { + MACIO_BIC(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1)); + UNLOCK(flags); + (void)MACIO_IN32(KEYLARGO_FCR1); + mdelay(1); + LOCK(flags); + MACIO_BIS(KEYLARGO_FCR1, KL1_USB2_CELL_ENABLE); + } + if (number < 4) { + reg = MACIO_IN32(KEYLARGO_FCR4); + reg &= ~(KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) | + KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number)); + reg &= ~(KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) | + KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1)); + MACIO_OUT32(KEYLARGO_FCR4, reg); + (void)MACIO_IN32(KEYLARGO_FCR4); + udelay(10); + } else { + reg = MACIO_IN32(KEYLARGO_FCR3); + reg &= ~(KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) | + KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0)); + reg &= ~(KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) | + KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1)); + MACIO_OUT32(KEYLARGO_FCR3, reg); + (void)MACIO_IN32(KEYLARGO_FCR3); + udelay(10); + } + if (macio->type == macio_intrepid) { + /* wait for clock stopped bits to clear */ + u32 test0 = 0, test1 = 0; + u32 status0, status1; + int timeout = 1000; + + UNLOCK(flags); + switch (number) { + case 0: + test0 = UNI_N_CLOCK_STOPPED_USB0; + test1 = UNI_N_CLOCK_STOPPED_USB0PCI; + break; + case 2: + test0 = UNI_N_CLOCK_STOPPED_USB1; + test1 = UNI_N_CLOCK_STOPPED_USB1PCI; + break; + case 4: + test0 = UNI_N_CLOCK_STOPPED_USB2; + test1 = UNI_N_CLOCK_STOPPED_USB2PCI; + break; + } + do { + if (--timeout <= 0) { + printk(KERN_ERR "core99_usb_enable: " + "Timeout waiting for clocks\n"); + break; + } + mdelay(1); + status0 = UN_IN(UNI_N_CLOCK_STOP_STATUS0); + status1 = UN_IN(UNI_N_CLOCK_STOP_STATUS1); + } while ((status0 & test0) | (status1 & test1)); + LOCK(flags); + } + } else { + /* Turn OFF */ + if (number < 4) { + reg = MACIO_IN32(KEYLARGO_FCR4); + reg |= KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) | + KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number); + reg |= KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) | + KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1); + MACIO_OUT32(KEYLARGO_FCR4, reg); + (void)MACIO_IN32(KEYLARGO_FCR4); + udelay(1); + } else { + reg = MACIO_IN32(KEYLARGO_FCR3); + reg |= KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) | + KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0); + reg |= KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) | + KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1); + MACIO_OUT32(KEYLARGO_FCR3, reg); + (void)MACIO_IN32(KEYLARGO_FCR3); + udelay(1); + } + if (number == 0) { + if (macio->type != macio_intrepid) + MACIO_BIC(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE); + (void)MACIO_IN32(KEYLARGO_FCR0); + udelay(1); + MACIO_BIS(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1)); + (void)MACIO_IN32(KEYLARGO_FCR0); + } else if (number == 2) { + if (macio->type != macio_intrepid) + MACIO_BIC(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE); + (void)MACIO_IN32(KEYLARGO_FCR0); + udelay(1); + MACIO_BIS(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1)); + (void)MACIO_IN32(KEYLARGO_FCR0); + } else if (number == 4) { + udelay(1); + MACIO_BIS(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1)); + (void)MACIO_IN32(KEYLARGO_FCR1); + } + udelay(1); + } + UNLOCK(flags); + + return 0; +} + +static long +core99_firewire_enable(struct device_node *node, long param, long value) +{ + unsigned long flags; + struct macio_chip *macio; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo && macio->type != macio_pangea && + macio->type != macio_intrepid) + return -ENODEV; + if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED)) + return -ENODEV; + + LOCK(flags); + if (value) { + UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW); + (void)UN_IN(UNI_N_CLOCK_CNTL); + } else { + UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW); + (void)UN_IN(UNI_N_CLOCK_CNTL); + } + UNLOCK(flags); + mdelay(1); + + return 0; +} + +static long +core99_firewire_cable_power(struct device_node *node, long param, long value) +{ + unsigned long flags; + struct macio_chip *macio; + + /* Trick: we allow NULL node */ + if ((pmac_mb.board_flags & PMAC_MB_HAS_FW_POWER) == 0) + return -ENODEV; + macio = &macio_chips[0]; + if (macio->type != macio_keylargo && macio->type != macio_pangea && + macio->type != macio_intrepid) + return -ENODEV; + if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED)) + return -ENODEV; + + LOCK(flags); + if (value) { + MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 0); + MACIO_IN8(KL_GPIO_FW_CABLE_POWER); + udelay(10); + } else { + MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 4); + MACIO_IN8(KL_GPIO_FW_CABLE_POWER); udelay(10); + } + UNLOCK(flags); + mdelay(1); + + return 0; +} + +static long +intrepid_aack_delay_enable(struct device_node *node, long param, long value) +{ + unsigned long flags; + + if (uninorth_rev < 0xd2) + return -ENODEV; + + LOCK(flags); + if (param) + UN_BIS(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE); + else + UN_BIC(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE); + UNLOCK(flags); + + return 0; +} + + +#endif /* CONFIG_PPC64 */ + +static long +core99_read_gpio(struct device_node *node, long param, long value) +{ + struct macio_chip *macio = &macio_chips[0]; + + return MACIO_IN8(param); +} + + +static long +core99_write_gpio(struct device_node *node, long param, long value) +{ + struct macio_chip *macio = &macio_chips[0]; + + MACIO_OUT8(param, (u8)(value & 0xff)); + return 0; +} + +#ifdef CONFIG_PPC64 +static long g5_gmac_enable(struct device_node *node, long param, long value) +{ + struct macio_chip *macio = &macio_chips[0]; + unsigned long flags; + + if (node == NULL) + return -ENODEV; + + LOCK(flags); + if (value) { + MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE); + mb(); + k2_skiplist[0] = NULL; + } else { + k2_skiplist[0] = node; + mb(); + MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE); + } + + UNLOCK(flags); + mdelay(1); + + return 0; +} + +static long g5_fw_enable(struct device_node *node, long param, long value) +{ + struct macio_chip *macio = &macio_chips[0]; + unsigned long flags; + + if (node == NULL) + return -ENODEV; + + LOCK(flags); + if (value) { + MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE); + mb(); + k2_skiplist[1] = NULL; + } else { + k2_skiplist[1] = node; + mb(); + MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE); + } + + UNLOCK(flags); + mdelay(1); + + return 0; +} + +static long g5_mpic_enable(struct device_node *node, long param, long value) +{ + unsigned long flags; + struct device_node *parent = of_get_parent(node); + int is_u3; + + if (parent == NULL) + return 0; + is_u3 = of_node_name_eq(parent, "u3") || of_node_name_eq(parent, "u4"); + of_node_put(parent); + if (!is_u3) + return 0; + + LOCK(flags); + UN_BIS(U3_TOGGLE_REG, U3_MPIC_RESET | U3_MPIC_OUTPUT_ENABLE); + UNLOCK(flags); + + return 0; +} + +static long g5_eth_phy_reset(struct device_node *node, long param, long value) +{ + struct macio_chip *macio = &macio_chips[0]; + struct device_node *phy; + int need_reset; + + /* + * We must not reset the combo PHYs, only the BCM5221 found in + * the iMac G5. + */ + phy = of_get_next_child(node, NULL); + if (!phy) + return -ENODEV; + need_reset = of_device_is_compatible(phy, "B5221"); + of_node_put(phy); + if (!need_reset) + return 0; + + /* PHY reset is GPIO 29, not in device-tree unfortunately */ + MACIO_OUT8(K2_GPIO_EXTINT_0 + 29, + KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA); + /* Thankfully, this is now always called at a time when we can + * schedule by sungem. + */ + msleep(10); + MACIO_OUT8(K2_GPIO_EXTINT_0 + 29, 0); + + return 0; +} + +static long g5_i2s_enable(struct device_node *node, long param, long value) +{ + /* Very crude implementation for now */ + struct macio_chip *macio = &macio_chips[0]; + unsigned long flags; + int cell; + u32 fcrs[3][3] = { + { 0, + K2_FCR1_I2S0_CELL_ENABLE | + K2_FCR1_I2S0_CLK_ENABLE_BIT | K2_FCR1_I2S0_ENABLE, + KL3_I2S0_CLK18_ENABLE + }, + { KL0_SCC_A_INTF_ENABLE, + K2_FCR1_I2S1_CELL_ENABLE | + K2_FCR1_I2S1_CLK_ENABLE_BIT | K2_FCR1_I2S1_ENABLE, + KL3_I2S1_CLK18_ENABLE + }, + { KL0_SCC_B_INTF_ENABLE, + SH_FCR1_I2S2_CELL_ENABLE | + SH_FCR1_I2S2_CLK_ENABLE_BIT | SH_FCR1_I2S2_ENABLE, + SH_FCR3_I2S2_CLK18_ENABLE + }, + }; + + if (macio->type != macio_keylargo2 && macio->type != macio_shasta) + return -ENODEV; + if (strncmp(node->name, "i2s-", 4)) + return -ENODEV; + cell = node->name[4] - 'a'; + switch(cell) { + case 0: + case 1: + break; + case 2: + if (macio->type == macio_shasta) + break; + fallthrough; + default: + return -ENODEV; + } + + LOCK(flags); + if (value) { + MACIO_BIC(KEYLARGO_FCR0, fcrs[cell][0]); + MACIO_BIS(KEYLARGO_FCR1, fcrs[cell][1]); + MACIO_BIS(KEYLARGO_FCR3, fcrs[cell][2]); + } else { + MACIO_BIC(KEYLARGO_FCR3, fcrs[cell][2]); + MACIO_BIC(KEYLARGO_FCR1, fcrs[cell][1]); + MACIO_BIS(KEYLARGO_FCR0, fcrs[cell][0]); + } + udelay(10); + UNLOCK(flags); + + return 0; +} + + +#ifdef CONFIG_SMP +static long g5_reset_cpu(struct device_node *node, long param, long value) +{ + unsigned int reset_io = 0; + unsigned long flags; + struct macio_chip *macio; + struct device_node *np; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo2 && macio->type != macio_shasta) + return -ENODEV; + + for_each_of_cpu_node(np) { + const u32 *num = of_get_property(np, "reg", NULL); + const u32 *rst = of_get_property(np, "soft-reset", NULL); + if (num == NULL || rst == NULL) + continue; + if (param == *num) { + reset_io = *rst; + break; + } + } + if (np == NULL || reset_io == 0) + return -ENODEV; + + LOCK(flags); + MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE); + (void)MACIO_IN8(reset_io); + udelay(1); + MACIO_OUT8(reset_io, 0); + (void)MACIO_IN8(reset_io); + UNLOCK(flags); + + return 0; +} +#endif /* CONFIG_SMP */ + +/* + * This can be called from pmac_smp so isn't static + * + * This takes the second CPU off the bus on dual CPU machines + * running UP + */ +void g5_phy_disable_cpu1(void) +{ + if (uninorth_maj == 3) + UN_OUT(U3_API_PHY_CONFIG_1, 0); +} +#endif /* CONFIG_PPC64 */ + +#ifndef CONFIG_PPC64 + + +#ifdef CONFIG_PM +static u32 save_gpio_levels[2]; +static u8 save_gpio_extint[KEYLARGO_GPIO_EXTINT_CNT]; +static u8 save_gpio_normal[KEYLARGO_GPIO_CNT]; +static u32 save_unin_clock_ctl; + +static void keylargo_shutdown(struct macio_chip *macio, int sleep_mode) +{ + u32 temp; + + if (sleep_mode) { + mdelay(1); + MACIO_BIS(KEYLARGO_FCR0, KL0_USB_REF_SUSPEND); + (void)MACIO_IN32(KEYLARGO_FCR0); + mdelay(1); + } + + MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE | + KL0_SCC_CELL_ENABLE | + KL0_IRDA_ENABLE | KL0_IRDA_CLK32_ENABLE | + KL0_IRDA_CLK19_ENABLE); + + MACIO_BIC(KEYLARGO_MBCR, KL_MBCR_MB0_DEV_MASK); + MACIO_BIS(KEYLARGO_MBCR, KL_MBCR_MB0_IDE_ENABLE); + + MACIO_BIC(KEYLARGO_FCR1, + KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT | + KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE | + KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT | + KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE | + KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE | + KL1_EIDE0_ENABLE | KL1_EIDE0_RESET_N | + KL1_EIDE1_ENABLE | KL1_EIDE1_RESET_N | + KL1_UIDE_ENABLE); + + MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); + MACIO_BIC(KEYLARGO_FCR2, KL2_IOBUS_ENABLE); + + temp = MACIO_IN32(KEYLARGO_FCR3); + if (macio->rev >= 2) { + temp |= KL3_SHUTDOWN_PLL2X; + if (sleep_mode) + temp |= KL3_SHUTDOWN_PLL_TOTAL; + } + + temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 | + KL3_SHUTDOWN_PLLKW35; + if (sleep_mode) + temp |= KL3_SHUTDOWN_PLLKW12; + temp &= ~(KL3_CLK66_ENABLE | KL3_CLK49_ENABLE | KL3_CLK45_ENABLE + | KL3_CLK31_ENABLE | KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE); + if (sleep_mode) + temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_VIA_CLK16_ENABLE); + MACIO_OUT32(KEYLARGO_FCR3, temp); + + /* Flush posted writes & wait a bit */ + (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1); +} + +static void pangea_shutdown(struct macio_chip *macio, int sleep_mode) +{ + u32 temp; + + MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE | + KL0_SCC_CELL_ENABLE | + KL0_USB0_CELL_ENABLE | KL0_USB1_CELL_ENABLE); + + MACIO_BIC(KEYLARGO_FCR1, + KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT | + KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE | + KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT | + KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE | + KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE | + KL1_UIDE_ENABLE); + if (pmac_mb.board_flags & PMAC_MB_MOBILE) + MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N); + + MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); + + temp = MACIO_IN32(KEYLARGO_FCR3); + temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 | + KL3_SHUTDOWN_PLLKW35; + temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE | KL3_CLK31_ENABLE + | KL3_I2S0_CLK18_ENABLE | KL3_I2S1_CLK18_ENABLE); + if (sleep_mode) + temp &= ~(KL3_VIA_CLK16_ENABLE | KL3_TIMER_CLK18_ENABLE); + MACIO_OUT32(KEYLARGO_FCR3, temp); + + /* Flush posted writes & wait a bit */ + (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1); +} + +static void intrepid_shutdown(struct macio_chip *macio, int sleep_mode) +{ + u32 temp; + + MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE | + KL0_SCC_CELL_ENABLE); + + MACIO_BIC(KEYLARGO_FCR1, + KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT | + KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE | + KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE | + KL1_EIDE0_ENABLE); + if (pmac_mb.board_flags & PMAC_MB_MOBILE) + MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N); + + temp = MACIO_IN32(KEYLARGO_FCR3); + temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE | + KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE); + if (sleep_mode) + temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_IT_VIA_CLK32_ENABLE); + MACIO_OUT32(KEYLARGO_FCR3, temp); + + /* Flush posted writes & wait a bit */ + (void)MACIO_IN32(KEYLARGO_FCR0); + mdelay(10); +} + + +static int +core99_sleep(void) +{ + struct macio_chip *macio; + int i; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo && macio->type != macio_pangea && + macio->type != macio_intrepid) + return -ENODEV; + + /* We power off the wireless slot in case it was not done + * by the driver. We don't power it on automatically however + */ + if (macio->flags & MACIO_FLAG_AIRPORT_ON) + core99_airport_enable(macio->of_node, 0, 0); + + /* We power off the FW cable. Should be done by the driver... */ + if (macio->flags & MACIO_FLAG_FW_SUPPORTED) { + core99_firewire_enable(NULL, 0, 0); + core99_firewire_cable_power(NULL, 0, 0); + } + + /* We make sure int. modem is off (in case driver lost it) */ + if (macio->type == macio_keylargo) + core99_modem_enable(macio->of_node, 0, 0); + else + pangea_modem_enable(macio->of_node, 0, 0); + + /* We make sure the sound is off as well */ + core99_sound_chip_enable(macio->of_node, 0, 0); + + /* + * Save various bits of KeyLargo + */ + + /* Save the state of the various GPIOs */ + save_gpio_levels[0] = MACIO_IN32(KEYLARGO_GPIO_LEVELS0); + save_gpio_levels[1] = MACIO_IN32(KEYLARGO_GPIO_LEVELS1); + for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++) + save_gpio_extint[i] = MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+i); + for (i=0; i<KEYLARGO_GPIO_CNT; i++) + save_gpio_normal[i] = MACIO_IN8(KEYLARGO_GPIO_0+i); + + /* Save the FCRs */ + if (macio->type == macio_keylargo) + save_mbcr = MACIO_IN32(KEYLARGO_MBCR); + save_fcr[0] = MACIO_IN32(KEYLARGO_FCR0); + save_fcr[1] = MACIO_IN32(KEYLARGO_FCR1); + save_fcr[2] = MACIO_IN32(KEYLARGO_FCR2); + save_fcr[3] = MACIO_IN32(KEYLARGO_FCR3); + save_fcr[4] = MACIO_IN32(KEYLARGO_FCR4); + if (macio->type == macio_pangea || macio->type == macio_intrepid) + save_fcr[5] = MACIO_IN32(KEYLARGO_FCR5); + + /* Save state & config of DBDMA channels */ + dbdma_save(macio, save_dbdma); + + /* + * Turn off as much as we can + */ + if (macio->type == macio_pangea) + pangea_shutdown(macio, 1); + else if (macio->type == macio_intrepid) + intrepid_shutdown(macio, 1); + else if (macio->type == macio_keylargo) + keylargo_shutdown(macio, 1); + + /* + * Put the host bridge to sleep + */ + + save_unin_clock_ctl = UN_IN(UNI_N_CLOCK_CNTL); + /* Note: do not switch GMAC off, driver does it when necessary, WOL must keep it + * enabled ! + */ + UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl & + ~(/*UNI_N_CLOCK_CNTL_GMAC|*/UNI_N_CLOCK_CNTL_FW/*|UNI_N_CLOCK_CNTL_PCI*/)); + udelay(100); + UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING); + UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_SLEEP); + mdelay(10); + + /* + * FIXME: A bit of black magic with OpenPIC (don't ask me why) + */ + if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) { + MACIO_BIS(0x506e0, 0x00400000); + MACIO_BIS(0x506e0, 0x80000000); + } + return 0; +} + +static int +core99_wake_up(void) +{ + struct macio_chip *macio; + int i; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo && macio->type != macio_pangea && + macio->type != macio_intrepid) + return -ENODEV; + + /* + * Wakeup the host bridge + */ + UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL); + udelay(10); + UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING); + udelay(10); + + /* + * Restore KeyLargo + */ + + if (macio->type == macio_keylargo) { + MACIO_OUT32(KEYLARGO_MBCR, save_mbcr); + (void)MACIO_IN32(KEYLARGO_MBCR); udelay(10); + } + MACIO_OUT32(KEYLARGO_FCR0, save_fcr[0]); + (void)MACIO_IN32(KEYLARGO_FCR0); udelay(10); + MACIO_OUT32(KEYLARGO_FCR1, save_fcr[1]); + (void)MACIO_IN32(KEYLARGO_FCR1); udelay(10); + MACIO_OUT32(KEYLARGO_FCR2, save_fcr[2]); + (void)MACIO_IN32(KEYLARGO_FCR2); udelay(10); + MACIO_OUT32(KEYLARGO_FCR3, save_fcr[3]); + (void)MACIO_IN32(KEYLARGO_FCR3); udelay(10); + MACIO_OUT32(KEYLARGO_FCR4, save_fcr[4]); + (void)MACIO_IN32(KEYLARGO_FCR4); udelay(10); + if (macio->type == macio_pangea || macio->type == macio_intrepid) { + MACIO_OUT32(KEYLARGO_FCR5, save_fcr[5]); + (void)MACIO_IN32(KEYLARGO_FCR5); udelay(10); + } + + dbdma_restore(macio, save_dbdma); + + MACIO_OUT32(KEYLARGO_GPIO_LEVELS0, save_gpio_levels[0]); + MACIO_OUT32(KEYLARGO_GPIO_LEVELS1, save_gpio_levels[1]); + for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++) + MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+i, save_gpio_extint[i]); + for (i=0; i<KEYLARGO_GPIO_CNT; i++) + MACIO_OUT8(KEYLARGO_GPIO_0+i, save_gpio_normal[i]); + + /* FIXME more black magic with OpenPIC ... */ + if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) { + MACIO_BIC(0x506e0, 0x00400000); + MACIO_BIC(0x506e0, 0x80000000); + } + + UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl); + udelay(100); + + return 0; +} + +#endif /* CONFIG_PM */ + +static long +core99_sleep_state(struct device_node *node, long param, long value) +{ + /* Param == 1 means to enter the "fake sleep" mode that is + * used for CPU speed switch + */ + if (param == 1) { + if (value == 1) { + UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING); + UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_IDLE2); + } else { + UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL); + udelay(10); + UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING); + udelay(10); + } + return 0; + } + if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0) + return -EPERM; + +#ifdef CONFIG_PM + if (value == 1) + return core99_sleep(); + else if (value == 0) + return core99_wake_up(); + +#endif /* CONFIG_PM */ + return 0; +} + +#endif /* CONFIG_PPC64 */ + +static long +generic_dev_can_wake(struct device_node *node, long param, long value) +{ + /* Todo: eventually check we are really dealing with on-board + * video device ... + */ + + if (pmac_mb.board_flags & PMAC_MB_MAY_SLEEP) + pmac_mb.board_flags |= PMAC_MB_CAN_SLEEP; + return 0; +} + +static long generic_get_mb_info(struct device_node *node, long param, long value) +{ + switch(param) { + case PMAC_MB_INFO_MODEL: + return pmac_mb.model_id; + case PMAC_MB_INFO_FLAGS: + return pmac_mb.board_flags; + case PMAC_MB_INFO_NAME: + /* hack hack hack... but should work */ + *((const char **)value) = pmac_mb.model_name; + return 0; + } + return -EINVAL; +} + + +/* + * Table definitions + */ + +/* Used on any machine + */ +static struct feature_table_entry any_features[] = { + { PMAC_FTR_GET_MB_INFO, generic_get_mb_info }, + { PMAC_FTR_DEVICE_CAN_WAKE, generic_dev_can_wake }, + { 0, NULL } +}; + +#ifndef CONFIG_PPC64 + +/* OHare based motherboards. Currently, we only use these on the + * 2400,3400 and 3500 series powerbooks. Some older desktops seem + * to have issues with turning on/off those asic cells + */ +static struct feature_table_entry ohare_features[] = { + { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable }, + { PMAC_FTR_SWIM3_ENABLE, ohare_floppy_enable }, + { PMAC_FTR_MESH_ENABLE, ohare_mesh_enable }, + { PMAC_FTR_IDE_ENABLE, ohare_ide_enable}, + { PMAC_FTR_IDE_RESET, ohare_ide_reset}, + { PMAC_FTR_SLEEP_STATE, ohare_sleep_state }, + { 0, NULL } +}; + +/* Heathrow desktop machines (Beige G3). + * Separated as some features couldn't be properly tested + * and the serial port control bits appear to confuse it. + */ +static struct feature_table_entry heathrow_desktop_features[] = { + { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable }, + { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable }, + { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable }, + { PMAC_FTR_IDE_RESET, heathrow_ide_reset }, + { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable }, + { 0, NULL } +}; + +/* Heathrow based laptop, that is the Wallstreet and mainstreet + * powerbooks. + */ +static struct feature_table_entry heathrow_laptop_features[] = { + { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable }, + { PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable }, + { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable }, + { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable }, + { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable }, + { PMAC_FTR_IDE_RESET, heathrow_ide_reset }, + { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable }, + { PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable }, + { PMAC_FTR_SLEEP_STATE, heathrow_sleep_state }, + { 0, NULL } +}; + +/* Paddington based machines + * The lombard (101) powerbook, first iMac models, B&W G3 and Yikes G4. + */ +static struct feature_table_entry paddington_features[] = { + { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable }, + { PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable }, + { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable }, + { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable }, + { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable }, + { PMAC_FTR_IDE_RESET, heathrow_ide_reset }, + { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable }, + { PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable }, + { PMAC_FTR_SLEEP_STATE, heathrow_sleep_state }, + { 0, NULL } +}; + +/* Core99 & MacRISC 2 machines (all machines released since the + * iBook (included), that is all AGP machines, except pangea + * chipset. The pangea chipset is the "combo" UniNorth/KeyLargo + * used on iBook2 & iMac "flow power". + */ +static struct feature_table_entry core99_features[] = { + { PMAC_FTR_SCC_ENABLE, core99_scc_enable }, + { PMAC_FTR_MODEM_ENABLE, core99_modem_enable }, + { PMAC_FTR_IDE_ENABLE, core99_ide_enable }, + { PMAC_FTR_IDE_RESET, core99_ide_reset }, + { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable }, + { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset }, + { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable }, + { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable }, + { PMAC_FTR_USB_ENABLE, core99_usb_enable }, + { PMAC_FTR_1394_ENABLE, core99_firewire_enable }, + { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power }, +#ifdef CONFIG_PM + { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, +#endif +#ifdef CONFIG_SMP + { PMAC_FTR_RESET_CPU, core99_reset_cpu }, +#endif /* CONFIG_SMP */ + { PMAC_FTR_READ_GPIO, core99_read_gpio }, + { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, + { 0, NULL } +}; + +/* RackMac + */ +static struct feature_table_entry rackmac_features[] = { + { PMAC_FTR_SCC_ENABLE, core99_scc_enable }, + { PMAC_FTR_IDE_ENABLE, core99_ide_enable }, + { PMAC_FTR_IDE_RESET, core99_ide_reset }, + { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable }, + { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset }, + { PMAC_FTR_USB_ENABLE, core99_usb_enable }, + { PMAC_FTR_1394_ENABLE, core99_firewire_enable }, + { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power }, + { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, +#ifdef CONFIG_SMP + { PMAC_FTR_RESET_CPU, core99_reset_cpu }, +#endif /* CONFIG_SMP */ + { PMAC_FTR_READ_GPIO, core99_read_gpio }, + { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, + { 0, NULL } +}; + +/* Pangea features + */ +static struct feature_table_entry pangea_features[] = { + { PMAC_FTR_SCC_ENABLE, core99_scc_enable }, + { PMAC_FTR_MODEM_ENABLE, pangea_modem_enable }, + { PMAC_FTR_IDE_ENABLE, core99_ide_enable }, + { PMAC_FTR_IDE_RESET, core99_ide_reset }, + { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable }, + { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset }, + { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable }, + { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable }, + { PMAC_FTR_USB_ENABLE, core99_usb_enable }, + { PMAC_FTR_1394_ENABLE, core99_firewire_enable }, + { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power }, + { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, + { PMAC_FTR_READ_GPIO, core99_read_gpio }, + { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, + { 0, NULL } +}; + +/* Intrepid features + */ +static struct feature_table_entry intrepid_features[] = { + { PMAC_FTR_SCC_ENABLE, core99_scc_enable }, + { PMAC_FTR_MODEM_ENABLE, pangea_modem_enable }, + { PMAC_FTR_IDE_ENABLE, core99_ide_enable }, + { PMAC_FTR_IDE_RESET, core99_ide_reset }, + { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable }, + { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset }, + { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable }, + { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable }, + { PMAC_FTR_USB_ENABLE, core99_usb_enable }, + { PMAC_FTR_1394_ENABLE, core99_firewire_enable }, + { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power }, + { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, + { PMAC_FTR_READ_GPIO, core99_read_gpio }, + { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, + { PMAC_FTR_AACK_DELAY_ENABLE, intrepid_aack_delay_enable }, + { 0, NULL } +}; + +#else /* CONFIG_PPC64 */ + +/* G5 features + */ +static struct feature_table_entry g5_features[] = { + { PMAC_FTR_GMAC_ENABLE, g5_gmac_enable }, + { PMAC_FTR_1394_ENABLE, g5_fw_enable }, + { PMAC_FTR_ENABLE_MPIC, g5_mpic_enable }, + { PMAC_FTR_GMAC_PHY_RESET, g5_eth_phy_reset }, + { PMAC_FTR_SOUND_CHIP_ENABLE, g5_i2s_enable }, +#ifdef CONFIG_SMP + { PMAC_FTR_RESET_CPU, g5_reset_cpu }, +#endif /* CONFIG_SMP */ + { PMAC_FTR_READ_GPIO, core99_read_gpio }, + { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, + { 0, NULL } +}; + +#endif /* CONFIG_PPC64 */ + +static struct pmac_mb_def pmac_mb_defs[] = { +#ifndef CONFIG_PPC64 + /* + * Desktops + */ + + { "AAPL,8500", "PowerMac 8500/8600", + PMAC_TYPE_PSURGE, NULL, + 0 + }, + { "AAPL,9500", "PowerMac 9500/9600", + PMAC_TYPE_PSURGE, NULL, + 0 + }, + { "AAPL,7200", "PowerMac 7200", + PMAC_TYPE_PSURGE, NULL, + 0 + }, + { "AAPL,7300", "PowerMac 7200/7300", + PMAC_TYPE_PSURGE, NULL, + 0 + }, + { "AAPL,7500", "PowerMac 7500", + PMAC_TYPE_PSURGE, NULL, + 0 + }, + { "AAPL,ShinerESB", "Apple Network Server", + PMAC_TYPE_ANS, NULL, + 0 + }, + { "AAPL,e407", "Alchemy", + PMAC_TYPE_ALCHEMY, NULL, + 0 + }, + { "AAPL,e411", "Gazelle", + PMAC_TYPE_GAZELLE, NULL, + 0 + }, + { "AAPL,Gossamer", "PowerMac G3 (Gossamer)", + PMAC_TYPE_GOSSAMER, heathrow_desktop_features, + 0 + }, + { "AAPL,PowerMac G3", "PowerMac G3 (Silk)", + PMAC_TYPE_SILK, heathrow_desktop_features, + 0 + }, + { "PowerMac1,1", "Blue&White G3", + PMAC_TYPE_YOSEMITE, paddington_features, + 0 + }, + { "PowerMac1,2", "PowerMac G4 PCI Graphics", + PMAC_TYPE_YIKES, paddington_features, + 0 + }, + { "PowerMac2,1", "iMac FireWire", + PMAC_TYPE_FW_IMAC, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 + }, + { "PowerMac2,2", "iMac FireWire", + PMAC_TYPE_FW_IMAC, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 + }, + { "PowerMac3,1", "PowerMac G4 AGP Graphics", + PMAC_TYPE_SAWTOOTH, core99_features, + PMAC_MB_OLD_CORE99 + }, + { "PowerMac3,2", "PowerMac G4 AGP Graphics", + PMAC_TYPE_SAWTOOTH, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 + }, + { "PowerMac3,3", "PowerMac G4 AGP Graphics", + PMAC_TYPE_SAWTOOTH, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 + }, + { "PowerMac3,4", "PowerMac G4 Silver", + PMAC_TYPE_QUICKSILVER, core99_features, + PMAC_MB_MAY_SLEEP + }, + { "PowerMac3,5", "PowerMac G4 Silver", + PMAC_TYPE_QUICKSILVER, core99_features, + PMAC_MB_MAY_SLEEP + }, + { "PowerMac3,6", "PowerMac G4 Windtunnel", + PMAC_TYPE_WINDTUNNEL, core99_features, + PMAC_MB_MAY_SLEEP, + }, + { "PowerMac4,1", "iMac \"Flower Power\"", + PMAC_TYPE_PANGEA_IMAC, pangea_features, + PMAC_MB_MAY_SLEEP + }, + { "PowerMac4,2", "Flat panel iMac", + PMAC_TYPE_FLAT_PANEL_IMAC, pangea_features, + PMAC_MB_CAN_SLEEP + }, + { "PowerMac4,4", "eMac", + PMAC_TYPE_EMAC, core99_features, + PMAC_MB_MAY_SLEEP + }, + { "PowerMac5,1", "PowerMac G4 Cube", + PMAC_TYPE_CUBE, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 + }, + { "PowerMac6,1", "Flat panel iMac", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP, + }, + { "PowerMac6,3", "Flat panel iMac", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP, + }, + { "PowerMac6,4", "eMac", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP, + }, + { "PowerMac10,1", "Mac mini", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP, + }, + { "PowerMac10,2", "Mac mini (Late 2005)", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP, + }, + { "iMac,1", "iMac (first generation)", + PMAC_TYPE_ORIG_IMAC, paddington_features, + 0 + }, + + /* + * Xserve's + */ + + { "RackMac1,1", "XServe", + PMAC_TYPE_RACKMAC, rackmac_features, + 0, + }, + { "RackMac1,2", "XServe rev. 2", + PMAC_TYPE_RACKMAC, rackmac_features, + 0, + }, + + /* + * Laptops + */ + + { "AAPL,3400/2400", "PowerBook 3400", + PMAC_TYPE_HOOPER, ohare_features, + PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE + }, + { "AAPL,3500", "PowerBook 3500", + PMAC_TYPE_KANGA, ohare_features, + PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE + }, + { "AAPL,PowerBook1998", "PowerBook Wallstreet", + PMAC_TYPE_WALLSTREET, heathrow_laptop_features, + PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE + }, + { "PowerBook1,1", "PowerBook 101 (Lombard)", + PMAC_TYPE_101_PBOOK, paddington_features, + PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE + }, + { "PowerBook2,1", "iBook (first generation)", + PMAC_TYPE_ORIG_IBOOK, core99_features, + PMAC_MB_CAN_SLEEP | PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE + }, + { "PowerBook2,2", "iBook FireWire", + PMAC_TYPE_FW_IBOOK, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | + PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE + }, + { "PowerBook3,1", "PowerBook Pismo", + PMAC_TYPE_PISMO, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | + PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE + }, + { "PowerBook3,2", "PowerBook Titanium", + PMAC_TYPE_TITANIUM, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook3,3", "PowerBook Titanium II", + PMAC_TYPE_TITANIUM2, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook3,4", "PowerBook Titanium III", + PMAC_TYPE_TITANIUM3, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook3,5", "PowerBook Titanium IV", + PMAC_TYPE_TITANIUM4, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook4,1", "iBook 2", + PMAC_TYPE_IBOOK2, pangea_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook4,2", "iBook 2", + PMAC_TYPE_IBOOK2, pangea_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook4,3", "iBook 2 rev. 2", + PMAC_TYPE_IBOOK2, pangea_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook5,1", "PowerBook G4 17\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,2", "PowerBook G4 15\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,3", "PowerBook G4 17\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,4", "PowerBook G4 15\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,5", "PowerBook G4 17\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,6", "PowerBook G4 15\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,7", "PowerBook G4 17\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,8", "PowerBook G4 15\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_MOBILE, + }, + { "PowerBook5,9", "PowerBook G4 17\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_MOBILE, + }, + { "PowerBook6,1", "PowerBook G4 12\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook6,2", "PowerBook G4", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook6,3", "iBook G4", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook6,4", "PowerBook G4 12\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook6,5", "iBook G4", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook6,7", "iBook G4", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook6,8", "PowerBook G4 12\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, +#else /* CONFIG_PPC64 */ + { "PowerMac7,2", "PowerMac G5", + PMAC_TYPE_POWERMAC_G5, g5_features, + 0, + }, +#ifdef CONFIG_PPC64 + { "PowerMac7,3", "PowerMac G5", + PMAC_TYPE_POWERMAC_G5, g5_features, + 0, + }, + { "PowerMac8,1", "iMac G5", + PMAC_TYPE_IMAC_G5, g5_features, + 0, + }, + { "PowerMac9,1", "PowerMac G5", + PMAC_TYPE_POWERMAC_G5_U3L, g5_features, + 0, + }, + { "PowerMac11,2", "PowerMac G5 Dual Core", + PMAC_TYPE_POWERMAC_G5_U3L, g5_features, + 0, + }, + { "PowerMac12,1", "iMac G5 (iSight)", + PMAC_TYPE_POWERMAC_G5_U3L, g5_features, + 0, + }, + { "RackMac3,1", "XServe G5", + PMAC_TYPE_XSERVE_G5, g5_features, + 0, + }, +#endif /* CONFIG_PPC64 */ +#endif /* CONFIG_PPC64 */ +}; + +/* + * The toplevel feature_call callback + */ +long pmac_do_feature_call(unsigned int selector, ...) +{ + struct device_node *node; + long param, value; + int i; + feature_call func = NULL; + va_list args; + + if (pmac_mb.features) + for (i=0; pmac_mb.features[i].function; i++) + if (pmac_mb.features[i].selector == selector) { + func = pmac_mb.features[i].function; + break; + } + if (!func) + for (i=0; any_features[i].function; i++) + if (any_features[i].selector == selector) { + func = any_features[i].function; + break; + } + if (!func) + return -ENODEV; + + va_start(args, selector); + node = (struct device_node*)va_arg(args, void*); + param = va_arg(args, long); + value = va_arg(args, long); + va_end(args); + + return func(node, param, value); +} + +static int __init probe_motherboard(void) +{ + int i; + struct macio_chip *macio = &macio_chips[0]; + const char *model = NULL; + struct device_node *dt; + int ret = 0; + + /* Lookup known motherboard type in device-tree. First try an + * exact match on the "model" property, then try a "compatible" + * match is none is found. + */ + dt = of_find_node_by_name(NULL, "device-tree"); + if (dt != NULL) + model = of_get_property(dt, "model", NULL); + for(i=0; model && i<ARRAY_SIZE(pmac_mb_defs); i++) { + if (strcmp(model, pmac_mb_defs[i].model_string) == 0) { + pmac_mb = pmac_mb_defs[i]; + goto found; + } + } + for(i=0; i<ARRAY_SIZE(pmac_mb_defs); i++) { + if (of_machine_is_compatible(pmac_mb_defs[i].model_string)) { + pmac_mb = pmac_mb_defs[i]; + goto found; + } + } + + /* Fallback to selection depending on mac-io chip type */ + switch(macio->type) { +#ifndef CONFIG_PPC64 + case macio_grand_central: + pmac_mb.model_id = PMAC_TYPE_PSURGE; + pmac_mb.model_name = "Unknown PowerSurge"; + break; + case macio_ohare: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_OHARE; + pmac_mb.model_name = "Unknown OHare-based"; + break; + case macio_heathrow: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_HEATHROW; + pmac_mb.model_name = "Unknown Heathrow-based"; + pmac_mb.features = heathrow_desktop_features; + break; + case macio_paddington: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PADDINGTON; + pmac_mb.model_name = "Unknown Paddington-based"; + pmac_mb.features = paddington_features; + break; + case macio_keylargo: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_CORE99; + pmac_mb.model_name = "Unknown Keylargo-based"; + pmac_mb.features = core99_features; + break; + case macio_pangea: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PANGEA; + pmac_mb.model_name = "Unknown Pangea-based"; + pmac_mb.features = pangea_features; + break; + case macio_intrepid: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_INTREPID; + pmac_mb.model_name = "Unknown Intrepid-based"; + pmac_mb.features = intrepid_features; + break; +#else /* CONFIG_PPC64 */ + case macio_keylargo2: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_K2; + pmac_mb.model_name = "Unknown K2-based"; + pmac_mb.features = g5_features; + break; + case macio_shasta: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_SHASTA; + pmac_mb.model_name = "Unknown Shasta-based"; + pmac_mb.features = g5_features; + break; +#endif /* CONFIG_PPC64 */ + default: + ret = -ENODEV; + goto done; + } +found: +#ifndef CONFIG_PPC64 + /* Fixup Hooper vs. Comet */ + if (pmac_mb.model_id == PMAC_TYPE_HOOPER) { + u32 __iomem * mach_id_ptr = ioremap(0xf3000034, 4); + if (!mach_id_ptr) { + ret = -ENODEV; + goto done; + } + /* Here, I used to disable the media-bay on comet. It + * appears this is wrong, the floppy connector is actually + * a kind of media-bay and works with the current driver. + */ + if (__raw_readl(mach_id_ptr) & 0x20000000UL) + pmac_mb.model_id = PMAC_TYPE_COMET; + iounmap(mach_id_ptr); + } + + /* Set default value of powersave_nap on machines that support it. + * It appears that uninorth rev 3 has a problem with it, we don't + * enable it on those. In theory, the flush-on-lock property is + * supposed to be set when not supported, but I'm not very confident + * that all Apple OF revs did it properly, I do it the paranoid way. + */ + if (uninorth_base && uninorth_rev > 3) { + struct device_node *np; + + for_each_of_cpu_node(np) { + int cpu_count = 1; + + /* Nap mode not supported on SMP */ + if (of_get_property(np, "flush-on-lock", NULL) || + (cpu_count > 1)) { + powersave_nap = 0; + of_node_put(np); + break; + } + + cpu_count++; + powersave_nap = 1; + } + } + if (powersave_nap) + printk(KERN_DEBUG "Processor NAP mode on idle enabled.\n"); + + /* On CPUs that support it (750FX), lowspeed by default during + * NAP mode + */ + powersave_lowspeed = 1; + +#else /* CONFIG_PPC64 */ + powersave_nap = 1; +#endif /* CONFIG_PPC64 */ + + /* Check for "mobile" machine */ + if (model && (strncmp(model, "PowerBook", 9) == 0 + || strncmp(model, "iBook", 5) == 0)) + pmac_mb.board_flags |= PMAC_MB_MOBILE; + + + printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name); +done: + of_node_put(dt); + return ret; +} + +/* Initialize the Core99 UniNorth host bridge and memory controller + */ +static void __init probe_uninorth(void) +{ + const u32 *addrp; + phys_addr_t address; + unsigned long actrl; + + /* Locate core99 Uni-N */ + uninorth_node = of_find_node_by_name(NULL, "uni-n"); + uninorth_maj = 1; + + /* Locate G5 u3 */ + if (uninorth_node == NULL) { + uninorth_node = of_find_node_by_name(NULL, "u3"); + uninorth_maj = 3; + } + /* Locate G5 u4 */ + if (uninorth_node == NULL) { + uninorth_node = of_find_node_by_name(NULL, "u4"); + uninorth_maj = 4; + } + if (uninorth_node == NULL) { + uninorth_maj = 0; + return; + } + + addrp = of_get_property(uninorth_node, "reg", NULL); + if (addrp == NULL) + return; + address = of_translate_address(uninorth_node, addrp); + if (address == 0) + return; + uninorth_base = ioremap(address, 0x40000); + if (uninorth_base == NULL) + return; + uninorth_rev = in_be32(UN_REG(UNI_N_VERSION)); + if (uninorth_maj == 3 || uninorth_maj == 4) { + u3_ht_base = ioremap(address + U3_HT_CONFIG_BASE, 0x1000); + if (u3_ht_base == NULL) { + iounmap(uninorth_base); + return; + } + } + + printk(KERN_INFO "Found %s memory controller & host bridge" + " @ 0x%08x revision: 0x%02x\n", uninorth_maj == 3 ? "U3" : + uninorth_maj == 4 ? "U4" : "UniNorth", + (unsigned int)address, uninorth_rev); + printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base); + + /* Set the arbitrer QAck delay according to what Apple does + */ + if (uninorth_rev < 0x11) { + actrl = UN_IN(UNI_N_ARB_CTRL) & ~UNI_N_ARB_CTRL_QACK_DELAY_MASK; + actrl |= ((uninorth_rev < 3) ? UNI_N_ARB_CTRL_QACK_DELAY105 : + UNI_N_ARB_CTRL_QACK_DELAY) << + UNI_N_ARB_CTRL_QACK_DELAY_SHIFT; + UN_OUT(UNI_N_ARB_CTRL, actrl); + } + + /* Some more magic as done by them in recent MacOS X on UniNorth + * revs 1.5 to 2.O and Pangea. Seem to toggle the UniN Maxbus/PCI + * memory timeout + */ + if ((uninorth_rev >= 0x11 && uninorth_rev <= 0x24) || + uninorth_rev == 0xc0) + UN_OUT(0x2160, UN_IN(0x2160) & 0x00ffffff); +} + +static void __init probe_one_macio(const char *name, const char *compat, int type) +{ + struct device_node* node; + int i; + volatile u32 __iomem *base; + const u32 *addrp, *revp; + phys_addr_t addr; + u64 size; + + for_each_node_by_name(node, name) { + if (!compat) + break; + if (of_device_is_compatible(node, compat)) + break; + } + if (!node) + return; + for(i=0; i<MAX_MACIO_CHIPS; i++) { + if (!macio_chips[i].of_node) + break; + if (macio_chips[i].of_node == node) + return; + } + + if (i >= MAX_MACIO_CHIPS) { + printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n"); + printk(KERN_ERR "pmac_feature: %pOF skipped\n", node); + return; + } + addrp = of_get_pci_address(node, 0, &size, NULL); + if (addrp == NULL) { + printk(KERN_ERR "pmac_feature: %pOF: can't find base !\n", + node); + return; + } + addr = of_translate_address(node, addrp); + if (addr == 0) { + printk(KERN_ERR "pmac_feature: %pOF, can't translate base !\n", + node); + return; + } + base = ioremap(addr, (unsigned long)size); + if (!base) { + printk(KERN_ERR "pmac_feature: %pOF, can't map mac-io chip !\n", + node); + return; + } + if (type == macio_keylargo || type == macio_keylargo2) { + const u32 *did = of_get_property(node, "device-id", NULL); + if (*did == 0x00000025) + type = macio_pangea; + if (*did == 0x0000003e) + type = macio_intrepid; + if (*did == 0x0000004f) + type = macio_shasta; + } + macio_chips[i].of_node = node; + macio_chips[i].type = type; + macio_chips[i].base = base; + macio_chips[i].flags = MACIO_FLAG_SCCA_ON | MACIO_FLAG_SCCB_ON; + macio_chips[i].name = macio_names[type]; + revp = of_get_property(node, "revision-id", NULL); + if (revp) + macio_chips[i].rev = *revp; + printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n", + macio_names[type], macio_chips[i].rev, macio_chips[i].base); +} + +static int __init +probe_macios(void) +{ + /* Warning, ordering is important */ + probe_one_macio("gc", NULL, macio_grand_central); + probe_one_macio("ohare", NULL, macio_ohare); + probe_one_macio("pci106b,7", NULL, macio_ohareII); + probe_one_macio("mac-io", "keylargo", macio_keylargo); + probe_one_macio("mac-io", "paddington", macio_paddington); + probe_one_macio("mac-io", "gatwick", macio_gatwick); + probe_one_macio("mac-io", "heathrow", macio_heathrow); + probe_one_macio("mac-io", "K2-Keylargo", macio_keylargo2); + + /* Make sure the "main" macio chip appear first */ + if (macio_chips[0].type == macio_gatwick + && macio_chips[1].type == macio_heathrow) { + struct macio_chip temp = macio_chips[0]; + macio_chips[0] = macio_chips[1]; + macio_chips[1] = temp; + } + if (macio_chips[0].type == macio_ohareII + && macio_chips[1].type == macio_ohare) { + struct macio_chip temp = macio_chips[0]; + macio_chips[0] = macio_chips[1]; + macio_chips[1] = temp; + } + macio_chips[0].lbus.index = 0; + macio_chips[1].lbus.index = 1; + + return (macio_chips[0].of_node == NULL) ? -ENODEV : 0; +} + +static void __init +initial_serial_shutdown(struct device_node *np) +{ + int len; + const struct slot_names_prop { + int count; + char name[1]; + } *slots; + const char *conn; + int port_type = PMAC_SCC_ASYNC; + int modem = 0; + + slots = of_get_property(np, "slot-names", &len); + conn = of_get_property(np, "AAPL,connector", &len); + if (conn && (strcmp(conn, "infrared") == 0)) + port_type = PMAC_SCC_IRDA; + else if (of_device_is_compatible(np, "cobalt")) + modem = 1; + else if (slots && slots->count > 0) { + if (strcmp(slots->name, "IrDA") == 0) + port_type = PMAC_SCC_IRDA; + else if (strcmp(slots->name, "Modem") == 0) + modem = 1; + } + if (modem) + pmac_call_feature(PMAC_FTR_MODEM_ENABLE, np, 0, 0); + pmac_call_feature(PMAC_FTR_SCC_ENABLE, np, port_type, 0); +} + +static void __init +set_initial_features(void) +{ + struct device_node *np; + + /* That hack appears to be necessary for some StarMax motherboards + * but I'm not too sure it was audited for side-effects on other + * ohare based machines... + * Since I still have difficulties figuring the right way to + * differentiate them all and since that hack was there for a long + * time, I'll keep it around + */ + if (macio_chips[0].type == macio_ohare) { + struct macio_chip *macio = &macio_chips[0]; + np = of_find_node_by_name(NULL, "via-pmu"); + if (np) + MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); + else + MACIO_OUT32(OHARE_FCR, STARMAX_FEATURES); + of_node_put(np); + } else if (macio_chips[1].type == macio_ohare) { + struct macio_chip *macio = &macio_chips[1]; + MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); + } + +#ifdef CONFIG_PPC64 + if (macio_chips[0].type == macio_keylargo2 || + macio_chips[0].type == macio_shasta) { +#ifndef CONFIG_SMP + /* On SMP machines running UP, we have the second CPU eating + * bus cycles. We need to take it off the bus. This is done + * from pmac_smp for SMP kernels running on one CPU + */ + np = of_find_node_by_type(NULL, "cpu"); + if (np != NULL) + np = of_find_node_by_type(np, "cpu"); + if (np != NULL) { + g5_phy_disable_cpu1(); + of_node_put(np); + } +#endif /* CONFIG_SMP */ + /* Enable GMAC for now for PCI probing. It will be disabled + * later on after PCI probe + */ + for_each_node_by_name(np, "ethernet") + if (of_device_is_compatible(np, "K2-GMAC")) + g5_gmac_enable(np, 0, 1); + + /* Enable FW before PCI probe. Will be disabled later on + * Note: We should have a batter way to check that we are + * dealing with uninorth internal cell and not a PCI cell + * on the external PCI. The code below works though. + */ + for_each_node_by_name(np, "firewire") { + if (of_device_is_compatible(np, "pci106b,5811")) { + macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED; + g5_fw_enable(np, 0, 1); + } + } + } +#else /* CONFIG_PPC64 */ + + if (macio_chips[0].type == macio_keylargo || + macio_chips[0].type == macio_pangea || + macio_chips[0].type == macio_intrepid) { + /* Enable GMAC for now for PCI probing. It will be disabled + * later on after PCI probe + */ + for_each_node_by_name(np, "ethernet") { + if (np->parent + && of_device_is_compatible(np->parent, "uni-north") + && of_device_is_compatible(np, "gmac")) + core99_gmac_enable(np, 0, 1); + } + + /* Enable FW before PCI probe. Will be disabled later on + * Note: We should have a batter way to check that we are + * dealing with uninorth internal cell and not a PCI cell + * on the external PCI. The code below works though. + */ + for_each_node_by_name(np, "firewire") { + if (np->parent + && of_device_is_compatible(np->parent, "uni-north") + && (of_device_is_compatible(np, "pci106b,18") || + of_device_is_compatible(np, "pci106b,30") || + of_device_is_compatible(np, "pci11c1,5811"))) { + macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED; + core99_firewire_enable(np, 0, 1); + } + } + + /* Enable ATA-100 before PCI probe. */ + for_each_node_by_name(np, "ata-6") { + if (np->parent + && of_device_is_compatible(np->parent, "uni-north") + && of_device_is_compatible(np, "kauai-ata")) { + core99_ata100_enable(np, 1); + } + } + + /* Switch airport off */ + for_each_node_by_name(np, "radio") { + if (np->parent == macio_chips[0].of_node) { + macio_chips[0].flags |= MACIO_FLAG_AIRPORT_ON; + core99_airport_enable(np, 0, 0); + } + } + } + + /* On all machines that support sound PM, switch sound off */ + if (macio_chips[0].of_node) + pmac_do_feature_call(PMAC_FTR_SOUND_CHIP_ENABLE, + macio_chips[0].of_node, 0, 0); + + /* While on some desktop G3s, we turn it back on */ + if (macio_chips[0].of_node && macio_chips[0].type == macio_heathrow + && (pmac_mb.model_id == PMAC_TYPE_GOSSAMER || + pmac_mb.model_id == PMAC_TYPE_SILK)) { + struct macio_chip *macio = &macio_chips[0]; + MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); + MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N); + } + +#endif /* CONFIG_PPC64 */ + + /* On all machines, switch modem & serial ports off */ + for_each_node_by_name(np, "ch-a") + initial_serial_shutdown(np); + for_each_node_by_name(np, "ch-b") + initial_serial_shutdown(np); +} + +void __init +pmac_feature_init(void) +{ + /* Detect the UniNorth memory controller */ + probe_uninorth(); + + /* Probe mac-io controllers */ + if (probe_macios()) { + printk(KERN_WARNING "No mac-io chip found\n"); + return; + } + + /* Probe machine type */ + if (probe_motherboard()) + printk(KERN_WARNING "Unknown PowerMac !\n"); + + /* Set some initial features (turn off some chips that will + * be later turned on) + */ + set_initial_features(); +} + +#if 0 +static void dump_HT_speeds(char *name, u32 cfg, u32 frq) +{ + int freqs[16] = { 200,300,400,500,600,800,1000,0,0,0,0,0,0,0,0,0 }; + int bits[8] = { 8,16,0,32,2,4,0,0 }; + int freq = (frq >> 8) & 0xf; + + if (freqs[freq] == 0) + printk("%s: Unknown HT link frequency %x\n", name, freq); + else + printk("%s: %d MHz on main link, (%d in / %d out) bits width\n", + name, freqs[freq], + bits[(cfg >> 28) & 0x7], bits[(cfg >> 24) & 0x7]); +} + +void __init pmac_check_ht_link(void) +{ + u32 ufreq, freq, ucfg, cfg; + struct device_node *pcix_node; + u8 px_bus, px_devfn; + struct pci_controller *px_hose; + + (void)in_be32(u3_ht_base + U3_HT_LINK_COMMAND); + ucfg = cfg = in_be32(u3_ht_base + U3_HT_LINK_CONFIG); + ufreq = freq = in_be32(u3_ht_base + U3_HT_LINK_FREQ); + dump_HT_speeds("U3 HyperTransport", cfg, freq); + + pcix_node = of_find_compatible_node(NULL, "pci", "pci-x"); + if (pcix_node == NULL) { + printk("No PCI-X bridge found\n"); + return; + } + if (pci_device_from_OF_node(pcix_node, &px_bus, &px_devfn) != 0) { + printk("PCI-X bridge found but not matched to pci\n"); + return; + } + px_hose = pci_find_hose_for_OF_device(pcix_node); + if (px_hose == NULL) { + printk("PCI-X bridge found but not matched to host\n"); + return; + } + early_read_config_dword(px_hose, px_bus, px_devfn, 0xc4, &cfg); + early_read_config_dword(px_hose, px_bus, px_devfn, 0xcc, &freq); + dump_HT_speeds("PCI-X HT Uplink", cfg, freq); + early_read_config_dword(px_hose, px_bus, px_devfn, 0xc8, &cfg); + early_read_config_dword(px_hose, px_bus, px_devfn, 0xd0, &freq); + dump_HT_speeds("PCI-X HT Downlink", cfg, freq); +} +#endif /* 0 */ + +/* + * Early video resume hook + */ + +static void (*pmac_early_vresume_proc)(void *data); +static void *pmac_early_vresume_data; + +void pmac_set_early_video_resume(void (*proc)(void *data), void *data) +{ + if (!machine_is(powermac)) + return; + preempt_disable(); + pmac_early_vresume_proc = proc; + pmac_early_vresume_data = data; + preempt_enable(); +} +EXPORT_SYMBOL(pmac_set_early_video_resume); + +void pmac_call_early_video_resume(void) +{ + if (pmac_early_vresume_proc) + pmac_early_vresume_proc(pmac_early_vresume_data); +} + +/* + * AGP related suspend/resume code + */ + +static struct pci_dev *pmac_agp_bridge; +static int (*pmac_agp_suspend)(struct pci_dev *bridge); +static int (*pmac_agp_resume)(struct pci_dev *bridge); + +void pmac_register_agp_pm(struct pci_dev *bridge, + int (*suspend)(struct pci_dev *bridge), + int (*resume)(struct pci_dev *bridge)) +{ + if (suspend || resume) { + pmac_agp_bridge = bridge; + pmac_agp_suspend = suspend; + pmac_agp_resume = resume; + return; + } + if (bridge != pmac_agp_bridge) + return; + pmac_agp_suspend = pmac_agp_resume = NULL; + return; +} +EXPORT_SYMBOL(pmac_register_agp_pm); + +void pmac_suspend_agp_for_card(struct pci_dev *dev) +{ + if (pmac_agp_bridge == NULL || pmac_agp_suspend == NULL) + return; + if (pmac_agp_bridge->bus != dev->bus) + return; + pmac_agp_suspend(pmac_agp_bridge); +} +EXPORT_SYMBOL(pmac_suspend_agp_for_card); + +void pmac_resume_agp_for_card(struct pci_dev *dev) +{ + if (pmac_agp_bridge == NULL || pmac_agp_resume == NULL) + return; + if (pmac_agp_bridge->bus != dev->bus) + return; + pmac_agp_resume(pmac_agp_bridge); +} +EXPORT_SYMBOL(pmac_resume_agp_for_card); + +int pmac_get_uninorth_variant(void) +{ + return uninorth_maj; +} diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c new file mode 100644 index 000000000..df89d9162 --- /dev/null +++ b/arch/powerpc/platforms/powermac/low_i2c.c @@ -0,0 +1,1513 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * arch/powerpc/platforms/powermac/low_i2c.c + * + * Copyright (C) 2003-2005 Ben. Herrenschmidt (benh@kernel.crashing.org) + * + * The linux i2c layer isn't completely suitable for our needs for various + * reasons ranging from too late initialisation to semantics not perfectly + * matching some requirements of the apple platform functions etc... + * + * This file thus provides a simple low level unified i2c interface for + * powermac that covers the various types of i2c busses used in Apple machines. + * For now, keywest, PMU and SMU, though we could add Cuda, or other bit + * banging busses found on older chipsets in earlier machines if we ever need + * one of them. + * + * The drivers in this file are synchronous/blocking. In addition, the + * keywest one is fairly slow due to the use of msleep instead of interrupts + * as the interrupt is currently used by i2c-keywest. In the long run, we + * might want to get rid of those high-level interfaces to linux i2c layer + * either completely (converting all drivers) or replacing them all with a + * single stub driver on top of this one. Once done, the interrupt will be + * available for our use. + */ + +#undef DEBUG +#undef DEBUG_LOW + +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/export.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <linux/delay.h> +#include <linux/completion.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/timer.h> +#include <linux/mutex.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <asm/keylargo.h> +#include <asm/uninorth.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/smu.h> +#include <asm/pmac_pfunc.h> +#include <asm/pmac_low_i2c.h> + +#ifdef DEBUG +#define DBG(x...) do {\ + printk(KERN_DEBUG "low_i2c:" x); \ + } while(0) +#else +#define DBG(x...) +#endif + +#ifdef DEBUG_LOW +#define DBG_LOW(x...) do {\ + printk(KERN_DEBUG "low_i2c:" x); \ + } while(0) +#else +#define DBG_LOW(x...) +#endif + + +static int pmac_i2c_force_poll = 1; + +/* + * A bus structure. Each bus in the system has such a structure associated. + */ +struct pmac_i2c_bus +{ + struct list_head link; + struct device_node *controller; + struct device_node *busnode; + int type; + int flags; + struct i2c_adapter adapter; + void *hostdata; + int channel; /* some hosts have multiple */ + int mode; /* current mode */ + struct mutex mutex; + int opened; + int polled; /* open mode */ + struct platform_device *platform_dev; + struct lock_class_key lock_key; + + /* ops */ + int (*open)(struct pmac_i2c_bus *bus); + void (*close)(struct pmac_i2c_bus *bus); + int (*xfer)(struct pmac_i2c_bus *bus, u8 addrdir, int subsize, + u32 subaddr, u8 *data, int len); +}; + +static LIST_HEAD(pmac_i2c_busses); + +/* + * Keywest implementation + */ + +struct pmac_i2c_host_kw +{ + struct mutex mutex; /* Access mutex for use by + * i2c-keywest */ + void __iomem *base; /* register base address */ + int bsteps; /* register stepping */ + int speed; /* speed */ + int irq; + u8 *data; + unsigned len; + int state; + int rw; + int polled; + int result; + struct completion complete; + spinlock_t lock; + struct timer_list timeout_timer; +}; + +/* Register indices */ +typedef enum { + reg_mode = 0, + reg_control, + reg_status, + reg_isr, + reg_ier, + reg_addr, + reg_subaddr, + reg_data +} reg_t; + +/* The Tumbler audio equalizer can be really slow sometimes */ +#define KW_POLL_TIMEOUT (2*HZ) + +/* Mode register */ +#define KW_I2C_MODE_100KHZ 0x00 +#define KW_I2C_MODE_50KHZ 0x01 +#define KW_I2C_MODE_25KHZ 0x02 +#define KW_I2C_MODE_DUMB 0x00 +#define KW_I2C_MODE_STANDARD 0x04 +#define KW_I2C_MODE_STANDARDSUB 0x08 +#define KW_I2C_MODE_COMBINED 0x0C +#define KW_I2C_MODE_MODE_MASK 0x0C +#define KW_I2C_MODE_CHAN_MASK 0xF0 + +/* Control register */ +#define KW_I2C_CTL_AAK 0x01 +#define KW_I2C_CTL_XADDR 0x02 +#define KW_I2C_CTL_STOP 0x04 +#define KW_I2C_CTL_START 0x08 + +/* Status register */ +#define KW_I2C_STAT_BUSY 0x01 +#define KW_I2C_STAT_LAST_AAK 0x02 +#define KW_I2C_STAT_LAST_RW 0x04 +#define KW_I2C_STAT_SDA 0x08 +#define KW_I2C_STAT_SCL 0x10 + +/* IER & ISR registers */ +#define KW_I2C_IRQ_DATA 0x01 +#define KW_I2C_IRQ_ADDR 0x02 +#define KW_I2C_IRQ_STOP 0x04 +#define KW_I2C_IRQ_START 0x08 +#define KW_I2C_IRQ_MASK 0x0F + +/* State machine states */ +enum { + state_idle, + state_addr, + state_read, + state_write, + state_stop, + state_dead +}; + +#define WRONG_STATE(name) do {\ + printk(KERN_DEBUG "KW: wrong state. Got %s, state: %s " \ + "(isr: %02x)\n", \ + name, __kw_state_names[host->state], isr); \ + } while(0) + +static const char *__kw_state_names[] = { + "state_idle", + "state_addr", + "state_read", + "state_write", + "state_stop", + "state_dead" +}; + +static inline u8 __kw_read_reg(struct pmac_i2c_host_kw *host, reg_t reg) +{ + return readb(host->base + (((unsigned int)reg) << host->bsteps)); +} + +static inline void __kw_write_reg(struct pmac_i2c_host_kw *host, + reg_t reg, u8 val) +{ + writeb(val, host->base + (((unsigned)reg) << host->bsteps)); + (void)__kw_read_reg(host, reg_subaddr); +} + +#define kw_write_reg(reg, val) __kw_write_reg(host, reg, val) +#define kw_read_reg(reg) __kw_read_reg(host, reg) + +static u8 kw_i2c_wait_interrupt(struct pmac_i2c_host_kw *host) +{ + int i, j; + u8 isr; + + for (i = 0; i < 1000; i++) { + isr = kw_read_reg(reg_isr) & KW_I2C_IRQ_MASK; + if (isr != 0) + return isr; + + /* This code is used with the timebase frozen, we cannot rely + * on udelay nor schedule when in polled mode ! + * For now, just use a bogus loop.... + */ + if (host->polled) { + for (j = 1; j < 100000; j++) + mb(); + } else + msleep(1); + } + return isr; +} + +static void kw_i2c_do_stop(struct pmac_i2c_host_kw *host, int result) +{ + kw_write_reg(reg_control, KW_I2C_CTL_STOP); + host->state = state_stop; + host->result = result; +} + + +static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr) +{ + u8 ack; + + DBG_LOW("kw_handle_interrupt(%s, isr: %x)\n", + __kw_state_names[host->state], isr); + + if (host->state == state_idle) { + printk(KERN_WARNING "low_i2c: Keywest got an out of state" + " interrupt, ignoring\n"); + kw_write_reg(reg_isr, isr); + return; + } + + if (isr == 0) { + printk(KERN_WARNING "low_i2c: Timeout in i2c transfer" + " on keywest !\n"); + if (host->state != state_stop) { + kw_i2c_do_stop(host, -EIO); + return; + } + ack = kw_read_reg(reg_status); + if (ack & KW_I2C_STAT_BUSY) + kw_write_reg(reg_status, 0); + host->state = state_idle; + kw_write_reg(reg_ier, 0x00); + if (!host->polled) + complete(&host->complete); + return; + } + + if (isr & KW_I2C_IRQ_ADDR) { + ack = kw_read_reg(reg_status); + if (host->state != state_addr) { + WRONG_STATE("KW_I2C_IRQ_ADDR"); + kw_i2c_do_stop(host, -EIO); + } + if ((ack & KW_I2C_STAT_LAST_AAK) == 0) { + host->result = -ENXIO; + host->state = state_stop; + DBG_LOW("KW: NAK on address\n"); + } else { + if (host->len == 0) + kw_i2c_do_stop(host, 0); + else if (host->rw) { + host->state = state_read; + if (host->len > 1) + kw_write_reg(reg_control, + KW_I2C_CTL_AAK); + } else { + host->state = state_write; + kw_write_reg(reg_data, *(host->data++)); + host->len--; + } + } + kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR); + } + + if (isr & KW_I2C_IRQ_DATA) { + if (host->state == state_read) { + *(host->data++) = kw_read_reg(reg_data); + host->len--; + kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); + if (host->len == 0) + host->state = state_stop; + else if (host->len == 1) + kw_write_reg(reg_control, 0); + } else if (host->state == state_write) { + ack = kw_read_reg(reg_status); + if ((ack & KW_I2C_STAT_LAST_AAK) == 0) { + DBG_LOW("KW: nack on data write\n"); + host->result = -EFBIG; + host->state = state_stop; + } else if (host->len) { + kw_write_reg(reg_data, *(host->data++)); + host->len--; + } else + kw_i2c_do_stop(host, 0); + } else { + WRONG_STATE("KW_I2C_IRQ_DATA"); + if (host->state != state_stop) + kw_i2c_do_stop(host, -EIO); + } + kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); + } + + if (isr & KW_I2C_IRQ_STOP) { + kw_write_reg(reg_isr, KW_I2C_IRQ_STOP); + if (host->state != state_stop) { + WRONG_STATE("KW_I2C_IRQ_STOP"); + host->result = -EIO; + } + host->state = state_idle; + if (!host->polled) + complete(&host->complete); + } + + /* Below should only happen in manual mode which we don't use ... */ + if (isr & KW_I2C_IRQ_START) + kw_write_reg(reg_isr, KW_I2C_IRQ_START); + +} + +/* Interrupt handler */ +static irqreturn_t kw_i2c_irq(int irq, void *dev_id) +{ + struct pmac_i2c_host_kw *host = dev_id; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + del_timer(&host->timeout_timer); + kw_i2c_handle_interrupt(host, kw_read_reg(reg_isr)); + if (host->state != state_idle) { + host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT; + add_timer(&host->timeout_timer); + } + spin_unlock_irqrestore(&host->lock, flags); + return IRQ_HANDLED; +} + +static void kw_i2c_timeout(struct timer_list *t) +{ + struct pmac_i2c_host_kw *host = from_timer(host, t, timeout_timer); + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + + /* + * If the timer is pending, that means we raced with the + * irq, in which case we just return + */ + if (timer_pending(&host->timeout_timer)) + goto skip; + + kw_i2c_handle_interrupt(host, kw_read_reg(reg_isr)); + if (host->state != state_idle) { + host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT; + add_timer(&host->timeout_timer); + } + skip: + spin_unlock_irqrestore(&host->lock, flags); +} + +static int kw_i2c_open(struct pmac_i2c_bus *bus) +{ + struct pmac_i2c_host_kw *host = bus->hostdata; + mutex_lock(&host->mutex); + return 0; +} + +static void kw_i2c_close(struct pmac_i2c_bus *bus) +{ + struct pmac_i2c_host_kw *host = bus->hostdata; + mutex_unlock(&host->mutex); +} + +static int kw_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize, + u32 subaddr, u8 *data, int len) +{ + struct pmac_i2c_host_kw *host = bus->hostdata; + u8 mode_reg = host->speed; + int use_irq = host->irq && !bus->polled; + + /* Setup mode & subaddress if any */ + switch(bus->mode) { + case pmac_i2c_mode_dumb: + return -EINVAL; + case pmac_i2c_mode_std: + mode_reg |= KW_I2C_MODE_STANDARD; + if (subsize != 0) + return -EINVAL; + break; + case pmac_i2c_mode_stdsub: + mode_reg |= KW_I2C_MODE_STANDARDSUB; + if (subsize != 1) + return -EINVAL; + break; + case pmac_i2c_mode_combined: + mode_reg |= KW_I2C_MODE_COMBINED; + if (subsize != 1) + return -EINVAL; + break; + } + + /* Setup channel & clear pending irqs */ + kw_write_reg(reg_isr, kw_read_reg(reg_isr)); + kw_write_reg(reg_mode, mode_reg | (bus->channel << 4)); + kw_write_reg(reg_status, 0); + + /* Set up address and r/w bit, strip possible stale bus number from + * address top bits + */ + kw_write_reg(reg_addr, addrdir & 0xff); + + /* Set up the sub address */ + if ((mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB + || (mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_COMBINED) + kw_write_reg(reg_subaddr, subaddr); + + /* Prepare for async operations */ + host->data = data; + host->len = len; + host->state = state_addr; + host->result = 0; + host->rw = (addrdir & 1); + host->polled = bus->polled; + + /* Enable interrupt if not using polled mode and interrupt is + * available + */ + if (use_irq) { + /* Clear completion */ + reinit_completion(&host->complete); + /* Ack stale interrupts */ + kw_write_reg(reg_isr, kw_read_reg(reg_isr)); + /* Arm timeout */ + host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT; + add_timer(&host->timeout_timer); + /* Enable emission */ + kw_write_reg(reg_ier, KW_I2C_IRQ_MASK); + } + + /* Start sending address */ + kw_write_reg(reg_control, KW_I2C_CTL_XADDR); + + /* Wait for completion */ + if (use_irq) + wait_for_completion(&host->complete); + else { + while(host->state != state_idle) { + unsigned long flags; + + u8 isr = kw_i2c_wait_interrupt(host); + spin_lock_irqsave(&host->lock, flags); + kw_i2c_handle_interrupt(host, isr); + spin_unlock_irqrestore(&host->lock, flags); + } + } + + /* Disable emission */ + kw_write_reg(reg_ier, 0); + + return host->result; +} + +static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np) +{ + struct pmac_i2c_host_kw *host; + const u32 *psteps, *prate, *addrp; + u32 steps; + + host = kzalloc(sizeof(*host), GFP_KERNEL); + if (host == NULL) { + printk(KERN_ERR "low_i2c: Can't allocate host for %pOF\n", + np); + return NULL; + } + + /* Apple is kind enough to provide a valid AAPL,address property + * on all i2c keywest nodes so far ... we would have to fallback + * to macio parsing if that wasn't the case + */ + addrp = of_get_property(np, "AAPL,address", NULL); + if (addrp == NULL) { + printk(KERN_ERR "low_i2c: Can't find address for %pOF\n", + np); + kfree(host); + return NULL; + } + mutex_init(&host->mutex); + init_completion(&host->complete); + spin_lock_init(&host->lock); + timer_setup(&host->timeout_timer, kw_i2c_timeout, 0); + + psteps = of_get_property(np, "AAPL,address-step", NULL); + steps = psteps ? (*psteps) : 0x10; + for (host->bsteps = 0; (steps & 0x01) == 0; host->bsteps++) + steps >>= 1; + /* Select interface rate */ + host->speed = KW_I2C_MODE_25KHZ; + prate = of_get_property(np, "AAPL,i2c-rate", NULL); + if (prate) switch(*prate) { + case 100: + host->speed = KW_I2C_MODE_100KHZ; + break; + case 50: + host->speed = KW_I2C_MODE_50KHZ; + break; + case 25: + host->speed = KW_I2C_MODE_25KHZ; + break; + } + host->irq = irq_of_parse_and_map(np, 0); + if (!host->irq) + printk(KERN_WARNING + "low_i2c: Failed to map interrupt for %pOF\n", + np); + + host->base = ioremap((*addrp), 0x1000); + if (host->base == NULL) { + printk(KERN_ERR "low_i2c: Can't map registers for %pOF\n", + np); + kfree(host); + return NULL; + } + + /* Make sure IRQ is disabled */ + kw_write_reg(reg_ier, 0); + + /* Request chip interrupt. We set IRQF_NO_SUSPEND because we don't + * want that interrupt disabled between the 2 passes of driver + * suspend or we'll have issues running the pfuncs + */ + if (request_irq(host->irq, kw_i2c_irq, IRQF_NO_SUSPEND, + "keywest i2c", host)) + host->irq = 0; + + printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %pOF\n", + *addrp, host->irq, np); + + return host; +} + + +static void __init kw_i2c_add(struct pmac_i2c_host_kw *host, + struct device_node *controller, + struct device_node *busnode, + int channel) +{ + struct pmac_i2c_bus *bus; + + bus = kzalloc(sizeof(struct pmac_i2c_bus), GFP_KERNEL); + if (bus == NULL) + return; + + bus->controller = of_node_get(controller); + bus->busnode = of_node_get(busnode); + bus->type = pmac_i2c_bus_keywest; + bus->hostdata = host; + bus->channel = channel; + bus->mode = pmac_i2c_mode_std; + bus->open = kw_i2c_open; + bus->close = kw_i2c_close; + bus->xfer = kw_i2c_xfer; + mutex_init(&bus->mutex); + lockdep_register_key(&bus->lock_key); + lockdep_set_class(&bus->mutex, &bus->lock_key); + if (controller == busnode) + bus->flags = pmac_i2c_multibus; + list_add(&bus->link, &pmac_i2c_busses); + + printk(KERN_INFO " channel %d bus %s\n", channel, + (controller == busnode) ? "<multibus>" : busnode->full_name); +} + +static void __init kw_i2c_probe(void) +{ + struct device_node *np, *child, *parent; + + /* Probe keywest-i2c busses */ + for_each_compatible_node(np, "i2c","keywest-i2c") { + struct pmac_i2c_host_kw *host; + int multibus; + + /* Found one, init a host structure */ + host = kw_i2c_host_init(np); + if (host == NULL) + continue; + + /* Now check if we have a multibus setup (old style) or if we + * have proper bus nodes. Note that the "new" way (proper bus + * nodes) might cause us to not create some busses that are + * kept hidden in the device-tree. In the future, we might + * want to work around that by creating busses without a node + * but not for now + */ + child = of_get_next_child(np, NULL); + multibus = !of_node_name_eq(child, "i2c-bus"); + of_node_put(child); + + /* For a multibus setup, we get the bus count based on the + * parent type + */ + if (multibus) { + int chans, i; + + parent = of_get_parent(np); + if (parent == NULL) + continue; + chans = parent->name[0] == 'u' ? 2 : 1; + for (i = 0; i < chans; i++) + kw_i2c_add(host, np, np, i); + } else { + for_each_child_of_node(np, child) { + const u32 *reg = of_get_property(child, + "reg", NULL); + if (reg == NULL) + continue; + kw_i2c_add(host, np, child, *reg); + } + } + } +} + + +/* + * + * PMU implementation + * + */ + +#ifdef CONFIG_ADB_PMU + +/* + * i2c command block to the PMU + */ +struct pmu_i2c_hdr { + u8 bus; + u8 mode; + u8 bus2; + u8 address; + u8 sub_addr; + u8 comb_addr; + u8 count; + u8 data[]; +}; + +static void pmu_i2c_complete(struct adb_request *req) +{ + complete(req->arg); +} + +static int pmu_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize, + u32 subaddr, u8 *data, int len) +{ + struct adb_request *req = bus->hostdata; + struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req->data[1]; + struct completion comp; + int read = addrdir & 1; + int retry; + int rc = 0; + + /* For now, limit ourselves to 16 bytes transfers */ + if (len > 16) + return -EINVAL; + + init_completion(&comp); + + for (retry = 0; retry < 16; retry++) { + memset(req, 0, sizeof(struct adb_request)); + hdr->bus = bus->channel; + hdr->count = len; + + switch(bus->mode) { + case pmac_i2c_mode_std: + if (subsize != 0) + return -EINVAL; + hdr->address = addrdir; + hdr->mode = PMU_I2C_MODE_SIMPLE; + break; + case pmac_i2c_mode_stdsub: + case pmac_i2c_mode_combined: + if (subsize != 1) + return -EINVAL; + hdr->address = addrdir & 0xfe; + hdr->comb_addr = addrdir; + hdr->sub_addr = subaddr; + if (bus->mode == pmac_i2c_mode_stdsub) + hdr->mode = PMU_I2C_MODE_STDSUB; + else + hdr->mode = PMU_I2C_MODE_COMBINED; + break; + default: + return -EINVAL; + } + + reinit_completion(&comp); + req->data[0] = PMU_I2C_CMD; + req->reply[0] = 0xff; + req->nbytes = sizeof(struct pmu_i2c_hdr) + 1; + req->done = pmu_i2c_complete; + req->arg = ∁ + if (!read && len) { + memcpy(hdr->data, data, len); + req->nbytes += len; + } + rc = pmu_queue_request(req); + if (rc) + return rc; + wait_for_completion(&comp); + if (req->reply[0] == PMU_I2C_STATUS_OK) + break; + msleep(15); + } + if (req->reply[0] != PMU_I2C_STATUS_OK) + return -EIO; + + for (retry = 0; retry < 16; retry++) { + memset(req, 0, sizeof(struct adb_request)); + + /* I know that looks like a lot, slow as hell, but darwin + * does it so let's be on the safe side for now + */ + msleep(15); + + hdr->bus = PMU_I2C_BUS_STATUS; + + reinit_completion(&comp); + req->data[0] = PMU_I2C_CMD; + req->reply[0] = 0xff; + req->nbytes = 2; + req->done = pmu_i2c_complete; + req->arg = ∁ + rc = pmu_queue_request(req); + if (rc) + return rc; + wait_for_completion(&comp); + + if (req->reply[0] == PMU_I2C_STATUS_OK && !read) + return 0; + if (req->reply[0] == PMU_I2C_STATUS_DATAREAD && read) { + int rlen = req->reply_len - 1; + + if (rlen != len) { + printk(KERN_WARNING "low_i2c: PMU returned %d" + " bytes, expected %d !\n", rlen, len); + return -EIO; + } + if (len) + memcpy(data, &req->reply[1], len); + return 0; + } + } + return -EIO; +} + +static void __init pmu_i2c_probe(void) +{ + struct pmac_i2c_bus *bus; + struct device_node *busnode; + int channel, sz; + + if (!pmu_present()) + return; + + /* There might or might not be a "pmu-i2c" node, we use that + * or via-pmu itself, whatever we find. I haven't seen a machine + * with separate bus nodes, so we assume a multibus setup + */ + busnode = of_find_node_by_name(NULL, "pmu-i2c"); + if (busnode == NULL) + busnode = of_find_node_by_name(NULL, "via-pmu"); + if (busnode == NULL) + return; + + printk(KERN_INFO "PMU i2c %pOF\n", busnode); + + /* + * We add bus 1 and 2 only for now, bus 0 is "special" + */ + for (channel = 1; channel <= 2; channel++) { + sz = sizeof(struct pmac_i2c_bus) + sizeof(struct adb_request); + bus = kzalloc(sz, GFP_KERNEL); + if (bus == NULL) + return; + + bus->controller = busnode; + bus->busnode = busnode; + bus->type = pmac_i2c_bus_pmu; + bus->channel = channel; + bus->mode = pmac_i2c_mode_std; + bus->hostdata = bus + 1; + bus->xfer = pmu_i2c_xfer; + mutex_init(&bus->mutex); + lockdep_register_key(&bus->lock_key); + lockdep_set_class(&bus->mutex, &bus->lock_key); + bus->flags = pmac_i2c_multibus; + list_add(&bus->link, &pmac_i2c_busses); + + printk(KERN_INFO " channel %d bus <multibus>\n", channel); + } +} + +#endif /* CONFIG_ADB_PMU */ + + +/* + * + * SMU implementation + * + */ + +#ifdef CONFIG_PMAC_SMU + +static void smu_i2c_complete(struct smu_i2c_cmd *cmd, void *misc) +{ + complete(misc); +} + +static int smu_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize, + u32 subaddr, u8 *data, int len) +{ + struct smu_i2c_cmd *cmd = bus->hostdata; + struct completion comp; + int read = addrdir & 1; + int rc = 0; + + if ((read && len > SMU_I2C_READ_MAX) || + ((!read) && len > SMU_I2C_WRITE_MAX)) + return -EINVAL; + + memset(cmd, 0, sizeof(struct smu_i2c_cmd)); + cmd->info.bus = bus->channel; + cmd->info.devaddr = addrdir; + cmd->info.datalen = len; + + switch(bus->mode) { + case pmac_i2c_mode_std: + if (subsize != 0) + return -EINVAL; + cmd->info.type = SMU_I2C_TRANSFER_SIMPLE; + break; + case pmac_i2c_mode_stdsub: + case pmac_i2c_mode_combined: + if (subsize > 3 || subsize < 1) + return -EINVAL; + cmd->info.sublen = subsize; + /* that's big-endian only but heh ! */ + memcpy(&cmd->info.subaddr, ((char *)&subaddr) + (4 - subsize), + subsize); + if (bus->mode == pmac_i2c_mode_stdsub) + cmd->info.type = SMU_I2C_TRANSFER_STDSUB; + else + cmd->info.type = SMU_I2C_TRANSFER_COMBINED; + break; + default: + return -EINVAL; + } + if (!read && len) + memcpy(cmd->info.data, data, len); + + init_completion(&comp); + cmd->done = smu_i2c_complete; + cmd->misc = ∁ + rc = smu_queue_i2c(cmd); + if (rc < 0) + return rc; + wait_for_completion(&comp); + rc = cmd->status; + + if (read && len) + memcpy(data, cmd->info.data, len); + return rc < 0 ? rc : 0; +} + +static void __init smu_i2c_probe(void) +{ + struct device_node *controller, *busnode; + struct pmac_i2c_bus *bus; + const u32 *reg; + int sz; + + if (!smu_present()) + return; + + controller = of_find_node_by_name(NULL, "smu-i2c-control"); + if (controller == NULL) + controller = of_find_node_by_name(NULL, "smu"); + if (controller == NULL) + return; + + printk(KERN_INFO "SMU i2c %pOF\n", controller); + + /* Look for childs, note that they might not be of the right + * type as older device trees mix i2c busses and other things + * at the same level + */ + for_each_child_of_node(controller, busnode) { + if (!of_node_is_type(busnode, "i2c") && + !of_node_is_type(busnode, "i2c-bus")) + continue; + reg = of_get_property(busnode, "reg", NULL); + if (reg == NULL) + continue; + + sz = sizeof(struct pmac_i2c_bus) + sizeof(struct smu_i2c_cmd); + bus = kzalloc(sz, GFP_KERNEL); + if (bus == NULL) + return; + + bus->controller = controller; + bus->busnode = of_node_get(busnode); + bus->type = pmac_i2c_bus_smu; + bus->channel = *reg; + bus->mode = pmac_i2c_mode_std; + bus->hostdata = bus + 1; + bus->xfer = smu_i2c_xfer; + mutex_init(&bus->mutex); + lockdep_register_key(&bus->lock_key); + lockdep_set_class(&bus->mutex, &bus->lock_key); + bus->flags = 0; + list_add(&bus->link, &pmac_i2c_busses); + + printk(KERN_INFO " channel %x bus %pOF\n", + bus->channel, busnode); + } +} + +#endif /* CONFIG_PMAC_SMU */ + +/* + * + * Core code + * + */ + + +struct pmac_i2c_bus *pmac_i2c_find_bus(struct device_node *node) +{ + struct device_node *p = of_node_get(node); + struct device_node *prev = NULL; + struct pmac_i2c_bus *bus; + + while(p) { + list_for_each_entry(bus, &pmac_i2c_busses, link) { + if (p == bus->busnode) { + if (prev && bus->flags & pmac_i2c_multibus) { + const u32 *reg; + reg = of_get_property(prev, "reg", + NULL); + if (!reg) + continue; + if (((*reg) >> 8) != bus->channel) + continue; + } + of_node_put(p); + of_node_put(prev); + return bus; + } + } + of_node_put(prev); + prev = p; + p = of_get_parent(p); + } + return NULL; +} +EXPORT_SYMBOL_GPL(pmac_i2c_find_bus); + +u8 pmac_i2c_get_dev_addr(struct device_node *device) +{ + const u32 *reg = of_get_property(device, "reg", NULL); + + if (reg == NULL) + return 0; + + return (*reg) & 0xff; +} +EXPORT_SYMBOL_GPL(pmac_i2c_get_dev_addr); + +struct device_node *pmac_i2c_get_controller(struct pmac_i2c_bus *bus) +{ + return bus->controller; +} +EXPORT_SYMBOL_GPL(pmac_i2c_get_controller); + +struct device_node *pmac_i2c_get_bus_node(struct pmac_i2c_bus *bus) +{ + return bus->busnode; +} +EXPORT_SYMBOL_GPL(pmac_i2c_get_bus_node); + +int pmac_i2c_get_type(struct pmac_i2c_bus *bus) +{ + return bus->type; +} +EXPORT_SYMBOL_GPL(pmac_i2c_get_type); + +int pmac_i2c_get_flags(struct pmac_i2c_bus *bus) +{ + return bus->flags; +} +EXPORT_SYMBOL_GPL(pmac_i2c_get_flags); + +int pmac_i2c_get_channel(struct pmac_i2c_bus *bus) +{ + return bus->channel; +} +EXPORT_SYMBOL_GPL(pmac_i2c_get_channel); + + +struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus) +{ + return &bus->adapter; +} +EXPORT_SYMBOL_GPL(pmac_i2c_get_adapter); + +struct pmac_i2c_bus *pmac_i2c_adapter_to_bus(struct i2c_adapter *adapter) +{ + struct pmac_i2c_bus *bus; + + list_for_each_entry(bus, &pmac_i2c_busses, link) + if (&bus->adapter == adapter) + return bus; + return NULL; +} +EXPORT_SYMBOL_GPL(pmac_i2c_adapter_to_bus); + +int pmac_i2c_match_adapter(struct device_node *dev, struct i2c_adapter *adapter) +{ + struct pmac_i2c_bus *bus = pmac_i2c_find_bus(dev); + + if (bus == NULL) + return 0; + return (&bus->adapter == adapter); +} +EXPORT_SYMBOL_GPL(pmac_i2c_match_adapter); + +int pmac_low_i2c_lock(struct device_node *np) +{ + struct pmac_i2c_bus *bus, *found = NULL; + + list_for_each_entry(bus, &pmac_i2c_busses, link) { + if (np == bus->controller) { + found = bus; + break; + } + } + if (!found) + return -ENODEV; + return pmac_i2c_open(bus, 0); +} +EXPORT_SYMBOL_GPL(pmac_low_i2c_lock); + +int pmac_low_i2c_unlock(struct device_node *np) +{ + struct pmac_i2c_bus *bus, *found = NULL; + + list_for_each_entry(bus, &pmac_i2c_busses, link) { + if (np == bus->controller) { + found = bus; + break; + } + } + if (!found) + return -ENODEV; + pmac_i2c_close(bus); + return 0; +} +EXPORT_SYMBOL_GPL(pmac_low_i2c_unlock); + + +int pmac_i2c_open(struct pmac_i2c_bus *bus, int polled) +{ + int rc; + + mutex_lock(&bus->mutex); + bus->polled = polled || pmac_i2c_force_poll; + bus->opened = 1; + bus->mode = pmac_i2c_mode_std; + if (bus->open && (rc = bus->open(bus)) != 0) { + bus->opened = 0; + mutex_unlock(&bus->mutex); + return rc; + } + return 0; +} +EXPORT_SYMBOL_GPL(pmac_i2c_open); + +void pmac_i2c_close(struct pmac_i2c_bus *bus) +{ + WARN_ON(!bus->opened); + if (bus->close) + bus->close(bus); + bus->opened = 0; + mutex_unlock(&bus->mutex); +} +EXPORT_SYMBOL_GPL(pmac_i2c_close); + +int pmac_i2c_setmode(struct pmac_i2c_bus *bus, int mode) +{ + WARN_ON(!bus->opened); + + /* Report me if you see the error below as there might be a new + * "combined4" mode that I need to implement for the SMU bus + */ + if (mode < pmac_i2c_mode_dumb || mode > pmac_i2c_mode_combined) { + printk(KERN_ERR "low_i2c: Invalid mode %d requested on" + " bus %pOF !\n", mode, bus->busnode); + return -EINVAL; + } + bus->mode = mode; + + return 0; +} +EXPORT_SYMBOL_GPL(pmac_i2c_setmode); + +int pmac_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize, + u32 subaddr, u8 *data, int len) +{ + int rc; + + WARN_ON(!bus->opened); + + DBG("xfer() chan=%d, addrdir=0x%x, mode=%d, subsize=%d, subaddr=0x%x," + " %d bytes, bus %pOF\n", bus->channel, addrdir, bus->mode, subsize, + subaddr, len, bus->busnode); + + rc = bus->xfer(bus, addrdir, subsize, subaddr, data, len); + +#ifdef DEBUG + if (rc) + DBG("xfer error %d\n", rc); +#endif + return rc; +} +EXPORT_SYMBOL_GPL(pmac_i2c_xfer); + +/* some quirks for platform function decoding */ +enum { + pmac_i2c_quirk_invmask = 0x00000001u, + pmac_i2c_quirk_skip = 0x00000002u, +}; + +static void pmac_i2c_devscan(void (*callback)(struct device_node *dev, + int quirks)) +{ + struct pmac_i2c_bus *bus; + struct device_node *np; + static struct whitelist_ent { + char *name; + char *compatible; + int quirks; + } whitelist[] = { + /* XXX Study device-tree's & apple drivers are get the quirks + * right ! + */ + /* Workaround: It seems that running the clockspreading + * properties on the eMac will cause lockups during boot. + * The machine seems to work fine without that. So for now, + * let's make sure i2c-hwclock doesn't match about "imic" + * clocks and we'll figure out if we really need to do + * something special about those later. + */ + { "i2c-hwclock", "imic5002", pmac_i2c_quirk_skip }, + { "i2c-hwclock", "imic5003", pmac_i2c_quirk_skip }, + { "i2c-hwclock", NULL, pmac_i2c_quirk_invmask }, + { "i2c-cpu-voltage", NULL, 0}, + { "temp-monitor", NULL, 0 }, + { "supply-monitor", NULL, 0 }, + { NULL, NULL, 0 }, + }; + + /* Only some devices need to have platform functions instantiated + * here. For now, we have a table. Others, like 9554 i2c GPIOs used + * on Xserve, if we ever do a driver for them, will use their own + * platform function instance + */ + list_for_each_entry(bus, &pmac_i2c_busses, link) { + for_each_child_of_node(bus->busnode, np) { + struct whitelist_ent *p; + /* If multibus, check if device is on that bus */ + if (bus->flags & pmac_i2c_multibus) + if (bus != pmac_i2c_find_bus(np)) + continue; + for (p = whitelist; p->name != NULL; p++) { + if (!of_node_name_eq(np, p->name)) + continue; + if (p->compatible && + !of_device_is_compatible(np, p->compatible)) + continue; + if (p->quirks & pmac_i2c_quirk_skip) + break; + callback(np, p->quirks); + break; + } + } + } +} + +#define MAX_I2C_DATA 64 + +struct pmac_i2c_pf_inst +{ + struct pmac_i2c_bus *bus; + u8 addr; + u8 buffer[MAX_I2C_DATA]; + u8 scratch[MAX_I2C_DATA]; + int bytes; + int quirks; +}; + +static void* pmac_i2c_do_begin(struct pmf_function *func, struct pmf_args *args) +{ + struct pmac_i2c_pf_inst *inst; + struct pmac_i2c_bus *bus; + + bus = pmac_i2c_find_bus(func->node); + if (bus == NULL) { + printk(KERN_ERR "low_i2c: Can't find bus for %pOF (pfunc)\n", + func->node); + return NULL; + } + if (pmac_i2c_open(bus, 0)) { + printk(KERN_ERR "low_i2c: Can't open i2c bus for %pOF (pfunc)\n", + func->node); + return NULL; + } + + /* XXX might need GFP_ATOMIC when called during the suspend process, + * but then, there are already lots of issues with suspending when + * near OOM that need to be resolved, the allocator itself should + * probably make GFP_NOIO implicit during suspend + */ + inst = kzalloc(sizeof(struct pmac_i2c_pf_inst), GFP_KERNEL); + if (inst == NULL) { + pmac_i2c_close(bus); + return NULL; + } + inst->bus = bus; + inst->addr = pmac_i2c_get_dev_addr(func->node); + inst->quirks = (int)(long)func->driver_data; + return inst; +} + +static void pmac_i2c_do_end(struct pmf_function *func, void *instdata) +{ + struct pmac_i2c_pf_inst *inst = instdata; + + if (inst == NULL) + return; + pmac_i2c_close(inst->bus); + kfree(inst); +} + +static int pmac_i2c_do_read(PMF_STD_ARGS, u32 len) +{ + struct pmac_i2c_pf_inst *inst = instdata; + + inst->bytes = len; + return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_read, 0, 0, + inst->buffer, len); +} + +static int pmac_i2c_do_write(PMF_STD_ARGS, u32 len, const u8 *data) +{ + struct pmac_i2c_pf_inst *inst = instdata; + + return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_write, 0, 0, + (u8 *)data, len); +} + +/* This function is used to do the masking & OR'ing for the "rmw" type + * callbacks. Ze should apply the mask and OR in the values in the + * buffer before writing back. The problem is that it seems that + * various darwin drivers implement the mask/or differently, thus + * we need to check the quirks first + */ +static void pmac_i2c_do_apply_rmw(struct pmac_i2c_pf_inst *inst, + u32 len, const u8 *mask, const u8 *val) +{ + int i; + + if (inst->quirks & pmac_i2c_quirk_invmask) { + for (i = 0; i < len; i ++) + inst->scratch[i] = (inst->buffer[i] & mask[i]) | val[i]; + } else { + for (i = 0; i < len; i ++) + inst->scratch[i] = (inst->buffer[i] & ~mask[i]) + | (val[i] & mask[i]); + } +} + +static int pmac_i2c_do_rmw(PMF_STD_ARGS, u32 masklen, u32 valuelen, + u32 totallen, const u8 *maskdata, + const u8 *valuedata) +{ + struct pmac_i2c_pf_inst *inst = instdata; + + if (masklen > inst->bytes || valuelen > inst->bytes || + totallen > inst->bytes || valuelen > masklen) + return -EINVAL; + + pmac_i2c_do_apply_rmw(inst, masklen, maskdata, valuedata); + + return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_write, 0, 0, + inst->scratch, totallen); +} + +static int pmac_i2c_do_read_sub(PMF_STD_ARGS, u8 subaddr, u32 len) +{ + struct pmac_i2c_pf_inst *inst = instdata; + + inst->bytes = len; + return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_read, 1, subaddr, + inst->buffer, len); +} + +static int pmac_i2c_do_write_sub(PMF_STD_ARGS, u8 subaddr, u32 len, + const u8 *data) +{ + struct pmac_i2c_pf_inst *inst = instdata; + + return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_write, 1, + subaddr, (u8 *)data, len); +} + +static int pmac_i2c_do_set_mode(PMF_STD_ARGS, int mode) +{ + struct pmac_i2c_pf_inst *inst = instdata; + + return pmac_i2c_setmode(inst->bus, mode); +} + +static int pmac_i2c_do_rmw_sub(PMF_STD_ARGS, u8 subaddr, u32 masklen, + u32 valuelen, u32 totallen, const u8 *maskdata, + const u8 *valuedata) +{ + struct pmac_i2c_pf_inst *inst = instdata; + + if (masklen > inst->bytes || valuelen > inst->bytes || + totallen > inst->bytes || valuelen > masklen) + return -EINVAL; + + pmac_i2c_do_apply_rmw(inst, masklen, maskdata, valuedata); + + return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_write, 1, + subaddr, inst->scratch, totallen); +} + +static int pmac_i2c_do_mask_and_comp(PMF_STD_ARGS, u32 len, + const u8 *maskdata, + const u8 *valuedata) +{ + struct pmac_i2c_pf_inst *inst = instdata; + int i, match; + + /* Get return value pointer, it's assumed to be a u32 */ + if (!args || !args->count || !args->u[0].p) + return -EINVAL; + + /* Check buffer */ + if (len > inst->bytes) + return -EINVAL; + + for (i = 0, match = 1; match && i < len; i ++) + if ((inst->buffer[i] & maskdata[i]) != valuedata[i]) + match = 0; + *args->u[0].p = match; + return 0; +} + +static int pmac_i2c_do_delay(PMF_STD_ARGS, u32 duration) +{ + msleep((duration + 999) / 1000); + return 0; +} + + +static struct pmf_handlers pmac_i2c_pfunc_handlers = { + .begin = pmac_i2c_do_begin, + .end = pmac_i2c_do_end, + .read_i2c = pmac_i2c_do_read, + .write_i2c = pmac_i2c_do_write, + .rmw_i2c = pmac_i2c_do_rmw, + .read_i2c_sub = pmac_i2c_do_read_sub, + .write_i2c_sub = pmac_i2c_do_write_sub, + .rmw_i2c_sub = pmac_i2c_do_rmw_sub, + .set_i2c_mode = pmac_i2c_do_set_mode, + .mask_and_compare = pmac_i2c_do_mask_and_comp, + .delay = pmac_i2c_do_delay, +}; + +static void __init pmac_i2c_dev_create(struct device_node *np, int quirks) +{ + DBG("dev_create(%pOF)\n", np); + + pmf_register_driver(np, &pmac_i2c_pfunc_handlers, + (void *)(long)quirks); +} + +static void __init pmac_i2c_dev_init(struct device_node *np, int quirks) +{ + DBG("dev_create(%pOF)\n", np); + + pmf_do_functions(np, NULL, 0, PMF_FLAGS_ON_INIT, NULL); +} + +static void pmac_i2c_dev_suspend(struct device_node *np, int quirks) +{ + DBG("dev_suspend(%pOF)\n", np); + pmf_do_functions(np, NULL, 0, PMF_FLAGS_ON_SLEEP, NULL); +} + +static void pmac_i2c_dev_resume(struct device_node *np, int quirks) +{ + DBG("dev_resume(%pOF)\n", np); + pmf_do_functions(np, NULL, 0, PMF_FLAGS_ON_WAKE, NULL); +} + +void pmac_pfunc_i2c_suspend(void) +{ + pmac_i2c_devscan(pmac_i2c_dev_suspend); +} + +void pmac_pfunc_i2c_resume(void) +{ + pmac_i2c_devscan(pmac_i2c_dev_resume); +} + +/* + * Initialize us: probe all i2c busses on the machine, instantiate + * busses and platform functions as needed. + */ +/* This is non-static as it might be called early by smp code */ +int __init pmac_i2c_init(void) +{ + static int i2c_inited; + + if (i2c_inited) + return 0; + i2c_inited = 1; + + /* Probe keywest-i2c busses */ + kw_i2c_probe(); + +#ifdef CONFIG_ADB_PMU + /* Probe PMU i2c busses */ + pmu_i2c_probe(); +#endif + +#ifdef CONFIG_PMAC_SMU + /* Probe SMU i2c busses */ + smu_i2c_probe(); +#endif + + /* Now add plaform functions for some known devices */ + pmac_i2c_devscan(pmac_i2c_dev_create); + + return 0; +} +machine_arch_initcall(powermac, pmac_i2c_init); + +/* Since pmac_i2c_init can be called too early for the platform device + * registration, we need to do it at a later time. In our case, subsys + * happens to fit well, though I agree it's a bit of a hack... + */ +static int __init pmac_i2c_create_platform_devices(void) +{ + struct pmac_i2c_bus *bus; + int i = 0; + + /* In the case where we are initialized from smp_init(), we must + * not use the timer (and thus the irq). It's safe from now on + * though + */ + pmac_i2c_force_poll = 0; + + /* Create platform devices */ + list_for_each_entry(bus, &pmac_i2c_busses, link) { + bus->platform_dev = + platform_device_alloc("i2c-powermac", i++); + if (bus->platform_dev == NULL) + return -ENOMEM; + bus->platform_dev->dev.platform_data = bus; + bus->platform_dev->dev.of_node = bus->busnode; + platform_device_add(bus->platform_dev); + } + + /* Now call platform "init" functions */ + pmac_i2c_devscan(pmac_i2c_dev_init); + + return 0; +} +machine_subsys_initcall(powermac, pmac_i2c_create_platform_devices); diff --git a/arch/powerpc/platforms/powermac/nvram.c b/arch/powerpc/platforms/powermac/nvram.c new file mode 100644 index 000000000..853ccc448 --- /dev/null +++ b/arch/powerpc/platforms/powermac/nvram.c @@ -0,0 +1,656 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2002 Benjamin Herrenschmidt (benh@kernel.crashing.org) + * + * Todo: - add support for the OF persistent properties + */ +#include <linux/export.h> +#include <linux/kernel.h> +#include <linux/stddef.h> +#include <linux/string.h> +#include <linux/nvram.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <linux/memblock.h> +#include <linux/completion.h> +#include <linux/spinlock.h> +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/nvram.h> + +#include "pmac.h" + +#define DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +#define NVRAM_SIZE 0x2000 /* 8kB of non-volatile RAM */ + +#define CORE99_SIGNATURE 0x5a +#define CORE99_ADLER_START 0x14 + +/* On Core99, nvram is either a sharp, a micron or an AMD flash */ +#define SM_FLASH_STATUS_DONE 0x80 +#define SM_FLASH_STATUS_ERR 0x38 + +#define SM_FLASH_CMD_ERASE_CONFIRM 0xd0 +#define SM_FLASH_CMD_ERASE_SETUP 0x20 +#define SM_FLASH_CMD_RESET 0xff +#define SM_FLASH_CMD_WRITE_SETUP 0x40 +#define SM_FLASH_CMD_CLEAR_STATUS 0x50 +#define SM_FLASH_CMD_READ_STATUS 0x70 + +/* CHRP NVRAM header */ +struct chrp_header { + u8 signature; + u8 cksum; + u16 len; + char name[12]; + u8 data[]; +}; + +struct core99_header { + struct chrp_header hdr; + u32 adler; + u32 generation; + u32 reserved[2]; +}; + +/* + * Read and write the non-volatile RAM on PowerMacs and CHRP machines. + */ +static int nvram_naddrs; +static volatile unsigned char __iomem *nvram_data; +static int is_core_99; +static int core99_bank = 0; +static int nvram_partitions[3]; +// XXX Turn that into a sem +static DEFINE_RAW_SPINLOCK(nv_lock); + +static int (*core99_write_bank)(int bank, u8* datas); +static int (*core99_erase_bank)(int bank); + +static char *nvram_image; + + +static unsigned char core99_nvram_read_byte(int addr) +{ + if (nvram_image == NULL) + return 0xff; + return nvram_image[addr]; +} + +static void core99_nvram_write_byte(int addr, unsigned char val) +{ + if (nvram_image == NULL) + return; + nvram_image[addr] = val; +} + +static ssize_t core99_nvram_read(char *buf, size_t count, loff_t *index) +{ + int i; + + if (nvram_image == NULL) + return -ENODEV; + if (*index > NVRAM_SIZE) + return 0; + + i = *index; + if (i + count > NVRAM_SIZE) + count = NVRAM_SIZE - i; + + memcpy(buf, &nvram_image[i], count); + *index = i + count; + return count; +} + +static ssize_t core99_nvram_write(char *buf, size_t count, loff_t *index) +{ + int i; + + if (nvram_image == NULL) + return -ENODEV; + if (*index > NVRAM_SIZE) + return 0; + + i = *index; + if (i + count > NVRAM_SIZE) + count = NVRAM_SIZE - i; + + memcpy(&nvram_image[i], buf, count); + *index = i + count; + return count; +} + +static ssize_t core99_nvram_size(void) +{ + if (nvram_image == NULL) + return -ENODEV; + return NVRAM_SIZE; +} + +#ifdef CONFIG_PPC32 +static volatile unsigned char __iomem *nvram_addr; +static int nvram_mult; + +static ssize_t ppc32_nvram_size(void) +{ + return NVRAM_SIZE; +} + +static unsigned char direct_nvram_read_byte(int addr) +{ + return in_8(&nvram_data[(addr & (NVRAM_SIZE - 1)) * nvram_mult]); +} + +static void direct_nvram_write_byte(int addr, unsigned char val) +{ + out_8(&nvram_data[(addr & (NVRAM_SIZE - 1)) * nvram_mult], val); +} + + +static unsigned char indirect_nvram_read_byte(int addr) +{ + unsigned char val; + unsigned long flags; + + raw_spin_lock_irqsave(&nv_lock, flags); + out_8(nvram_addr, addr >> 5); + val = in_8(&nvram_data[(addr & 0x1f) << 4]); + raw_spin_unlock_irqrestore(&nv_lock, flags); + + return val; +} + +static void indirect_nvram_write_byte(int addr, unsigned char val) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&nv_lock, flags); + out_8(nvram_addr, addr >> 5); + out_8(&nvram_data[(addr & 0x1f) << 4], val); + raw_spin_unlock_irqrestore(&nv_lock, flags); +} + + +#ifdef CONFIG_ADB_PMU + +static void pmu_nvram_complete(struct adb_request *req) +{ + if (req->arg) + complete((struct completion *)req->arg); +} + +static unsigned char pmu_nvram_read_byte(int addr) +{ + struct adb_request req; + DECLARE_COMPLETION_ONSTACK(req_complete); + + req.arg = system_state == SYSTEM_RUNNING ? &req_complete : NULL; + if (pmu_request(&req, pmu_nvram_complete, 3, PMU_READ_NVRAM, + (addr >> 8) & 0xff, addr & 0xff)) + return 0xff; + if (system_state == SYSTEM_RUNNING) + wait_for_completion(&req_complete); + while (!req.complete) + pmu_poll(); + return req.reply[0]; +} + +static void pmu_nvram_write_byte(int addr, unsigned char val) +{ + struct adb_request req; + DECLARE_COMPLETION_ONSTACK(req_complete); + + req.arg = system_state == SYSTEM_RUNNING ? &req_complete : NULL; + if (pmu_request(&req, pmu_nvram_complete, 4, PMU_WRITE_NVRAM, + (addr >> 8) & 0xff, addr & 0xff, val)) + return; + if (system_state == SYSTEM_RUNNING) + wait_for_completion(&req_complete); + while (!req.complete) + pmu_poll(); +} + +#endif /* CONFIG_ADB_PMU */ +#endif /* CONFIG_PPC32 */ + +static u8 chrp_checksum(struct chrp_header* hdr) +{ + u8 *ptr; + u16 sum = hdr->signature; + for (ptr = (u8 *)&hdr->len; ptr < hdr->data; ptr++) + sum += *ptr; + while (sum > 0xFF) + sum = (sum & 0xFF) + (sum>>8); + return sum; +} + +static u32 core99_calc_adler(u8 *buffer) +{ + int cnt; + u32 low, high; + + buffer += CORE99_ADLER_START; + low = 1; + high = 0; + for (cnt=0; cnt<(NVRAM_SIZE-CORE99_ADLER_START); cnt++) { + if ((cnt % 5000) == 0) { + high %= 65521UL; + high %= 65521UL; + } + low += buffer[cnt]; + high += low; + } + low %= 65521UL; + high %= 65521UL; + + return (high << 16) | low; +} + +static u32 core99_check(u8* datas) +{ + struct core99_header* hdr99 = (struct core99_header*)datas; + + if (hdr99->hdr.signature != CORE99_SIGNATURE) { + DBG("Invalid signature\n"); + return 0; + } + if (hdr99->hdr.cksum != chrp_checksum(&hdr99->hdr)) { + DBG("Invalid checksum\n"); + return 0; + } + if (hdr99->adler != core99_calc_adler(datas)) { + DBG("Invalid adler\n"); + return 0; + } + return hdr99->generation; +} + +static int sm_erase_bank(int bank) +{ + int stat; + unsigned long timeout; + + u8 __iomem *base = (u8 __iomem *)nvram_data + core99_bank*NVRAM_SIZE; + + DBG("nvram: Sharp/Micron Erasing bank %d...\n", bank); + + out_8(base, SM_FLASH_CMD_ERASE_SETUP); + out_8(base, SM_FLASH_CMD_ERASE_CONFIRM); + timeout = 0; + do { + if (++timeout > 1000000) { + printk(KERN_ERR "nvram: Sharp/Micron flash erase timeout !\n"); + break; + } + out_8(base, SM_FLASH_CMD_READ_STATUS); + stat = in_8(base); + } while (!(stat & SM_FLASH_STATUS_DONE)); + + out_8(base, SM_FLASH_CMD_CLEAR_STATUS); + out_8(base, SM_FLASH_CMD_RESET); + + if (memchr_inv(base, 0xff, NVRAM_SIZE)) { + printk(KERN_ERR "nvram: Sharp/Micron flash erase failed !\n"); + return -ENXIO; + } + return 0; +} + +static int sm_write_bank(int bank, u8* datas) +{ + int i, stat = 0; + unsigned long timeout; + + u8 __iomem *base = (u8 __iomem *)nvram_data + core99_bank*NVRAM_SIZE; + + DBG("nvram: Sharp/Micron Writing bank %d...\n", bank); + + for (i=0; i<NVRAM_SIZE; i++) { + out_8(base+i, SM_FLASH_CMD_WRITE_SETUP); + udelay(1); + out_8(base+i, datas[i]); + timeout = 0; + do { + if (++timeout > 1000000) { + printk(KERN_ERR "nvram: Sharp/Micron flash write timeout !\n"); + break; + } + out_8(base, SM_FLASH_CMD_READ_STATUS); + stat = in_8(base); + } while (!(stat & SM_FLASH_STATUS_DONE)); + if (!(stat & SM_FLASH_STATUS_DONE)) + break; + } + out_8(base, SM_FLASH_CMD_CLEAR_STATUS); + out_8(base, SM_FLASH_CMD_RESET); + if (memcmp(base, datas, NVRAM_SIZE)) { + printk(KERN_ERR "nvram: Sharp/Micron flash write failed !\n"); + return -ENXIO; + } + return 0; +} + +static int amd_erase_bank(int bank) +{ + int stat = 0; + unsigned long timeout; + + u8 __iomem *base = (u8 __iomem *)nvram_data + core99_bank*NVRAM_SIZE; + + DBG("nvram: AMD Erasing bank %d...\n", bank); + + /* Unlock 1 */ + out_8(base+0x555, 0xaa); + udelay(1); + /* Unlock 2 */ + out_8(base+0x2aa, 0x55); + udelay(1); + + /* Sector-Erase */ + out_8(base+0x555, 0x80); + udelay(1); + out_8(base+0x555, 0xaa); + udelay(1); + out_8(base+0x2aa, 0x55); + udelay(1); + out_8(base, 0x30); + udelay(1); + + timeout = 0; + do { + if (++timeout > 1000000) { + printk(KERN_ERR "nvram: AMD flash erase timeout !\n"); + break; + } + stat = in_8(base) ^ in_8(base); + } while (stat != 0); + + /* Reset */ + out_8(base, 0xf0); + udelay(1); + + if (memchr_inv(base, 0xff, NVRAM_SIZE)) { + printk(KERN_ERR "nvram: AMD flash erase failed !\n"); + return -ENXIO; + } + return 0; +} + +static int amd_write_bank(int bank, u8* datas) +{ + int i, stat = 0; + unsigned long timeout; + + u8 __iomem *base = (u8 __iomem *)nvram_data + core99_bank*NVRAM_SIZE; + + DBG("nvram: AMD Writing bank %d...\n", bank); + + for (i=0; i<NVRAM_SIZE; i++) { + /* Unlock 1 */ + out_8(base+0x555, 0xaa); + udelay(1); + /* Unlock 2 */ + out_8(base+0x2aa, 0x55); + udelay(1); + + /* Write single word */ + out_8(base+0x555, 0xa0); + udelay(1); + out_8(base+i, datas[i]); + + timeout = 0; + do { + if (++timeout > 1000000) { + printk(KERN_ERR "nvram: AMD flash write timeout !\n"); + break; + } + stat = in_8(base) ^ in_8(base); + } while (stat != 0); + if (stat != 0) + break; + } + + /* Reset */ + out_8(base, 0xf0); + udelay(1); + + if (memcmp(base, datas, NVRAM_SIZE)) { + printk(KERN_ERR "nvram: AMD flash write failed !\n"); + return -ENXIO; + } + return 0; +} + +static void __init lookup_partitions(void) +{ + u8 buffer[17]; + int i, offset; + struct chrp_header* hdr; + + if (pmac_newworld) { + nvram_partitions[pmac_nvram_OF] = -1; + nvram_partitions[pmac_nvram_XPRAM] = -1; + nvram_partitions[pmac_nvram_NR] = -1; + hdr = (struct chrp_header *)buffer; + + offset = 0; + buffer[16] = 0; + do { + for (i=0;i<16;i++) + buffer[i] = ppc_md.nvram_read_val(offset+i); + if (!strcmp(hdr->name, "common")) + nvram_partitions[pmac_nvram_OF] = offset + 0x10; + if (!strcmp(hdr->name, "APL,MacOS75")) { + nvram_partitions[pmac_nvram_XPRAM] = offset + 0x10; + nvram_partitions[pmac_nvram_NR] = offset + 0x110; + } + offset += (hdr->len * 0x10); + } while(offset < NVRAM_SIZE); + } else { + nvram_partitions[pmac_nvram_OF] = 0x1800; + nvram_partitions[pmac_nvram_XPRAM] = 0x1300; + nvram_partitions[pmac_nvram_NR] = 0x1400; + } + DBG("nvram: OF partition at 0x%x\n", nvram_partitions[pmac_nvram_OF]); + DBG("nvram: XP partition at 0x%x\n", nvram_partitions[pmac_nvram_XPRAM]); + DBG("nvram: NR partition at 0x%x\n", nvram_partitions[pmac_nvram_NR]); +} + +static void core99_nvram_sync(void) +{ + struct core99_header* hdr99; + unsigned long flags; + + if (!is_core_99 || !nvram_data || !nvram_image) + return; + + raw_spin_lock_irqsave(&nv_lock, flags); + if (!memcmp(nvram_image, (u8*)nvram_data + core99_bank*NVRAM_SIZE, + NVRAM_SIZE)) + goto bail; + + DBG("Updating nvram...\n"); + + hdr99 = (struct core99_header*)nvram_image; + hdr99->generation++; + hdr99->hdr.signature = CORE99_SIGNATURE; + hdr99->hdr.cksum = chrp_checksum(&hdr99->hdr); + hdr99->adler = core99_calc_adler(nvram_image); + core99_bank = core99_bank ? 0 : 1; + if (core99_erase_bank) + if (core99_erase_bank(core99_bank)) { + printk("nvram: Error erasing bank %d\n", core99_bank); + goto bail; + } + if (core99_write_bank) + if (core99_write_bank(core99_bank, nvram_image)) + printk("nvram: Error writing bank %d\n", core99_bank); + bail: + raw_spin_unlock_irqrestore(&nv_lock, flags); + +#ifdef DEBUG + mdelay(2000); +#endif +} + +static int __init core99_nvram_setup(struct device_node *dp, unsigned long addr) +{ + int i; + u32 gen_bank0, gen_bank1; + + if (nvram_naddrs < 1) { + printk(KERN_ERR "nvram: no address\n"); + return -EINVAL; + } + nvram_image = memblock_alloc(NVRAM_SIZE, SMP_CACHE_BYTES); + if (!nvram_image) + panic("%s: Failed to allocate %u bytes\n", __func__, + NVRAM_SIZE); + nvram_data = ioremap(addr, NVRAM_SIZE*2); + nvram_naddrs = 1; /* Make sure we get the correct case */ + + DBG("nvram: Checking bank 0...\n"); + + gen_bank0 = core99_check((u8 *)nvram_data); + gen_bank1 = core99_check((u8 *)nvram_data + NVRAM_SIZE); + core99_bank = (gen_bank0 < gen_bank1) ? 1 : 0; + + DBG("nvram: gen0=%d, gen1=%d\n", gen_bank0, gen_bank1); + DBG("nvram: Active bank is: %d\n", core99_bank); + + for (i=0; i<NVRAM_SIZE; i++) + nvram_image[i] = nvram_data[i + core99_bank*NVRAM_SIZE]; + + ppc_md.nvram_read_val = core99_nvram_read_byte; + ppc_md.nvram_write_val = core99_nvram_write_byte; + ppc_md.nvram_read = core99_nvram_read; + ppc_md.nvram_write = core99_nvram_write; + ppc_md.nvram_size = core99_nvram_size; + ppc_md.nvram_sync = core99_nvram_sync; + ppc_md.machine_shutdown = core99_nvram_sync; + /* + * Maybe we could be smarter here though making an exclusive list + * of known flash chips is a bit nasty as older OF didn't provide us + * with a useful "compatible" entry. A solution would be to really + * identify the chip using flash id commands and base ourselves on + * a list of known chips IDs + */ + if (of_device_is_compatible(dp, "amd-0137")) { + core99_erase_bank = amd_erase_bank; + core99_write_bank = amd_write_bank; + } else { + core99_erase_bank = sm_erase_bank; + core99_write_bank = sm_write_bank; + } + return 0; +} + +int __init pmac_nvram_init(void) +{ + struct device_node *dp; + struct resource r1, r2; + unsigned int s1 = 0, s2 = 0; + int err = 0; + + nvram_naddrs = 0; + + dp = of_find_node_by_name(NULL, "nvram"); + if (dp == NULL) { + printk(KERN_ERR "Can't find NVRAM device\n"); + return -ENODEV; + } + + /* Try to obtain an address */ + if (of_address_to_resource(dp, 0, &r1) == 0) { + nvram_naddrs = 1; + s1 = resource_size(&r1); + if (of_address_to_resource(dp, 1, &r2) == 0) { + nvram_naddrs = 2; + s2 = resource_size(&r2); + } + } + + is_core_99 = of_device_is_compatible(dp, "nvram,flash"); + if (is_core_99) { + err = core99_nvram_setup(dp, r1.start); + goto bail; + } + +#ifdef CONFIG_PPC32 + if (machine_is(chrp) && nvram_naddrs == 1) { + nvram_data = ioremap(r1.start, s1); + nvram_mult = 1; + ppc_md.nvram_read_val = direct_nvram_read_byte; + ppc_md.nvram_write_val = direct_nvram_write_byte; + ppc_md.nvram_size = ppc32_nvram_size; + } else if (nvram_naddrs == 1) { + nvram_data = ioremap(r1.start, s1); + nvram_mult = (s1 + NVRAM_SIZE - 1) / NVRAM_SIZE; + ppc_md.nvram_read_val = direct_nvram_read_byte; + ppc_md.nvram_write_val = direct_nvram_write_byte; + ppc_md.nvram_size = ppc32_nvram_size; + } else if (nvram_naddrs == 2) { + nvram_addr = ioremap(r1.start, s1); + nvram_data = ioremap(r2.start, s2); + ppc_md.nvram_read_val = indirect_nvram_read_byte; + ppc_md.nvram_write_val = indirect_nvram_write_byte; + ppc_md.nvram_size = ppc32_nvram_size; + } else if (nvram_naddrs == 0 && sys_ctrler == SYS_CTRLER_PMU) { +#ifdef CONFIG_ADB_PMU + nvram_naddrs = -1; + ppc_md.nvram_read_val = pmu_nvram_read_byte; + ppc_md.nvram_write_val = pmu_nvram_write_byte; + ppc_md.nvram_size = ppc32_nvram_size; +#endif /* CONFIG_ADB_PMU */ + } else { + printk(KERN_ERR "Incompatible type of NVRAM\n"); + err = -ENXIO; + } +#endif /* CONFIG_PPC32 */ +bail: + of_node_put(dp); + if (err == 0) + lookup_partitions(); + return err; +} + +int pmac_get_partition(int partition) +{ + return nvram_partitions[partition]; +} + +u8 pmac_xpram_read(int xpaddr) +{ + int offset = pmac_get_partition(pmac_nvram_XPRAM); + + if (offset < 0 || xpaddr < 0 || xpaddr > 0x100) + return 0xff; + + return ppc_md.nvram_read_val(xpaddr + offset); +} + +void pmac_xpram_write(int xpaddr, u8 data) +{ + int offset = pmac_get_partition(pmac_nvram_XPRAM); + + if (offset < 0 || xpaddr < 0 || xpaddr > 0x100) + return; + + ppc_md.nvram_write_val(xpaddr + offset, data); +} + +EXPORT_SYMBOL(pmac_get_partition); +EXPORT_SYMBOL(pmac_xpram_read); +EXPORT_SYMBOL(pmac_xpram_write); diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c new file mode 100644 index 000000000..e35eaa9cf --- /dev/null +++ b/arch/powerpc/platforms/powermac/pci.c @@ -0,0 +1,1256 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Support for PCI bridges found on Power Macintoshes. + * + * Copyright (C) 2003-2005 Benjamin Herrenschmuidt (benh@kernel.crashing.org) + * Copyright (C) 1997 Paul Mackerras (paulus@samba.org) + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/of_pci.h> + +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#include <asm/machdep.h> +#include <asm/pmac_feature.h> +#include <asm/grackle.h> +#include <asm/ppc-pci.h> + +#include "pmac.h" + +#undef DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +/* XXX Could be per-controller, but I don't think we risk anything by + * assuming we won't have both UniNorth and Bandit */ +static int has_uninorth; +#ifdef CONFIG_PPC64 +static struct pci_controller *u3_agp; +#else +static int has_second_ohare; +#endif /* CONFIG_PPC64 */ + +extern int pcibios_assign_bus_offset; + +struct device_node *k2_skiplist[2]; + +/* + * Magic constants for enabling cache coherency in the bandit/PSX bridge. + */ +#define BANDIT_DEVID_2 8 +#define BANDIT_REVID 3 + +#define BANDIT_DEVNUM 11 +#define BANDIT_MAGIC 0x50 +#define BANDIT_COHERENT 0x40 + +static int __init fixup_one_level_bus_range(struct device_node *node, int higher) +{ + for (; node; node = node->sibling) { + const int * bus_range; + const unsigned int *class_code; + int len; + + /* For PCI<->PCI bridges or CardBus bridges, we go down */ + class_code = of_get_property(node, "class-code", NULL); + if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && + (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) + continue; + bus_range = of_get_property(node, "bus-range", &len); + if (bus_range != NULL && len > 2 * sizeof(int)) { + if (bus_range[1] > higher) + higher = bus_range[1]; + } + higher = fixup_one_level_bus_range(node->child, higher); + } + return higher; +} + +/* This routine fixes the "bus-range" property of all bridges in the + * system since they tend to have their "last" member wrong on macs + * + * Note that the bus numbers manipulated here are OF bus numbers, they + * are not Linux bus numbers. + */ +static void __init fixup_bus_range(struct device_node *bridge) +{ + int *bus_range, len; + struct property *prop; + + /* Lookup the "bus-range" property for the hose */ + prop = of_find_property(bridge, "bus-range", &len); + if (prop == NULL || prop->length < 2 * sizeof(int)) + return; + + bus_range = prop->value; + bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]); +} + +/* + * Apple MacRISC (U3, UniNorth, Bandit, Chaos) PCI controllers. + * + * The "Bandit" version is present in all early PCI PowerMacs, + * and up to the first ones using Grackle. Some machines may + * have 2 bandit controllers (2 PCI busses). + * + * "Chaos" is used in some "Bandit"-type machines as a bridge + * for the separate display bus. It is accessed the same + * way as bandit, but cannot be probed for devices. It therefore + * has its own config access functions. + * + * The "UniNorth" version is present in all Core99 machines + * (iBook, G4, new IMacs, and all the recent Apple machines). + * It contains 3 controllers in one ASIC. + * + * The U3 is the bridge used on G5 machines. It contains an + * AGP bus which is dealt with the old UniNorth access routines + * and a HyperTransport bus which uses its own set of access + * functions. + */ + +#define MACRISC_CFA0(devfn, off) \ + ((1 << (unsigned int)PCI_SLOT(dev_fn)) \ + | (((unsigned int)PCI_FUNC(dev_fn)) << 8) \ + | (((unsigned int)(off)) & 0xFCUL)) + +#define MACRISC_CFA1(bus, devfn, off) \ + ((((unsigned int)(bus)) << 16) \ + |(((unsigned int)(devfn)) << 8) \ + |(((unsigned int)(off)) & 0xFCUL) \ + |1UL) + +static void __iomem *macrisc_cfg_map_bus(struct pci_bus *bus, + unsigned int dev_fn, + int offset) +{ + unsigned int caddr; + struct pci_controller *hose; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return NULL; + + if (bus->number == hose->first_busno) { + if (dev_fn < (11 << 3)) + return NULL; + caddr = MACRISC_CFA0(dev_fn, offset); + } else + caddr = MACRISC_CFA1(bus->number, dev_fn, offset); + + /* Uninorth will return garbage if we don't read back the value ! */ + do { + out_le32(hose->cfg_addr, caddr); + } while (in_le32(hose->cfg_addr) != caddr); + + offset &= has_uninorth ? 0x07 : 0x03; + return hose->cfg_data + offset; +} + +static struct pci_ops macrisc_pci_ops = +{ + .map_bus = macrisc_cfg_map_bus, + .read = pci_generic_config_read, + .write = pci_generic_config_write, +}; + +#ifdef CONFIG_PPC32 +/* + * Verify that a specific (bus, dev_fn) exists on chaos + */ +static void __iomem *chaos_map_bus(struct pci_bus *bus, unsigned int devfn, + int offset) +{ + struct device_node *np; + const u32 *vendor, *device; + + if (offset >= 0x100) + return NULL; + np = of_pci_find_child_device(bus->dev.of_node, devfn); + if (np == NULL) + return NULL; + + vendor = of_get_property(np, "vendor-id", NULL); + device = of_get_property(np, "device-id", NULL); + if (vendor == NULL || device == NULL) + return NULL; + + if ((*vendor == 0x106b) && (*device == 3) && (offset >= 0x10) + && (offset != 0x14) && (offset != 0x18) && (offset <= 0x24)) + return NULL; + + return macrisc_cfg_map_bus(bus, devfn, offset); +} + +static struct pci_ops chaos_pci_ops = +{ + .map_bus = chaos_map_bus, + .read = pci_generic_config_read, + .write = pci_generic_config_write, +}; + +static void __init setup_chaos(struct pci_controller *hose, + struct resource *addr) +{ + /* assume a `chaos' bridge */ + hose->ops = &chaos_pci_ops; + hose->cfg_addr = ioremap(addr->start + 0x800000, 0x1000); + hose->cfg_data = ioremap(addr->start + 0xc00000, 0x1000); +} +#endif /* CONFIG_PPC32 */ + +#ifdef CONFIG_PPC64 +/* + * These versions of U3 HyperTransport config space access ops do not + * implement self-view of the HT host yet + */ + +/* + * This function deals with some "special cases" devices. + * + * 0 -> No special case + * 1 -> Skip the device but act as if the access was successful + * (return 0xff's on reads, eventually, cache config space + * accesses in a later version) + * -1 -> Hide the device (unsuccessful access) + */ +static int u3_ht_skip_device(struct pci_controller *hose, + struct pci_bus *bus, unsigned int devfn) +{ + struct device_node *busdn, *dn; + int i; + + /* We only allow config cycles to devices that are in OF device-tree + * as we are apparently having some weird things going on with some + * revs of K2 on recent G5s, except for the host bridge itself, which + * is missing from the tree but we know we can probe. + */ + if (bus->self) + busdn = pci_device_to_OF_node(bus->self); + else if (devfn == 0) + return 0; + else + busdn = hose->dn; + for (dn = busdn->child; dn; dn = dn->sibling) + if (PCI_DN(dn) && PCI_DN(dn)->devfn == devfn) + break; + if (dn == NULL) + return -1; + + /* + * When a device in K2 is powered down, we die on config + * cycle accesses. Fix that here. + */ + for (i=0; i<2; i++) + if (k2_skiplist[i] == dn) + return 1; + + return 0; +} + +#define U3_HT_CFA0(devfn, off) \ + ((((unsigned int)devfn) << 8) | offset) +#define U3_HT_CFA1(bus, devfn, off) \ + (U3_HT_CFA0(devfn, off) \ + + (((unsigned int)bus) << 16) \ + + 0x01000000UL) + +static void __iomem *u3_ht_cfg_access(struct pci_controller *hose, u8 bus, + u8 devfn, u8 offset, int *swap) +{ + *swap = 1; + if (bus == hose->first_busno) { + if (devfn != 0) + return hose->cfg_data + U3_HT_CFA0(devfn, offset); + *swap = 0; + return ((void __iomem *)hose->cfg_addr) + (offset << 2); + } else + return hose->cfg_data + U3_HT_CFA1(bus, devfn, offset); +} + +static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose; + void __iomem *addr; + int swap; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + if (offset >= 0x100) + return PCIBIOS_BAD_REGISTER_NUMBER; + addr = u3_ht_cfg_access(hose, bus->number, devfn, offset, &swap); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + switch (u3_ht_skip_device(hose, bus, devfn)) { + case 0: + break; + case 1: + switch (len) { + case 1: + *val = 0xff; break; + case 2: + *val = 0xffff; break; + default: + *val = 0xfffffffful; break; + } + return PCIBIOS_SUCCESSFUL; + default: + return PCIBIOS_DEVICE_NOT_FOUND; + } + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + *val = in_8(addr); + break; + case 2: + *val = swap ? in_le16(addr) : in_be16(addr); + break; + default: + *val = swap ? in_le32(addr) : in_be32(addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose; + void __iomem *addr; + int swap; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + if (offset >= 0x100) + return PCIBIOS_BAD_REGISTER_NUMBER; + addr = u3_ht_cfg_access(hose, bus->number, devfn, offset, &swap); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + switch (u3_ht_skip_device(hose, bus, devfn)) { + case 0: + break; + case 1: + return PCIBIOS_SUCCESSFUL; + default: + return PCIBIOS_DEVICE_NOT_FOUND; + } + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + out_8(addr, val); + break; + case 2: + swap ? out_le16(addr, val) : out_be16(addr, val); + break; + default: + swap ? out_le32(addr, val) : out_be32(addr, val); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops u3_ht_pci_ops = +{ + .read = u3_ht_read_config, + .write = u3_ht_write_config, +}; + +#define U4_PCIE_CFA0(devfn, off) \ + ((1 << ((unsigned int)PCI_SLOT(dev_fn))) \ + | (((unsigned int)PCI_FUNC(dev_fn)) << 8) \ + | ((((unsigned int)(off)) >> 8) << 28) \ + | (((unsigned int)(off)) & 0xfcU)) + +#define U4_PCIE_CFA1(bus, devfn, off) \ + ((((unsigned int)(bus)) << 16) \ + |(((unsigned int)(devfn)) << 8) \ + | ((((unsigned int)(off)) >> 8) << 28) \ + |(((unsigned int)(off)) & 0xfcU) \ + |1UL) + +static void __iomem *u4_pcie_cfg_map_bus(struct pci_bus *bus, + unsigned int dev_fn, + int offset) +{ + struct pci_controller *hose; + unsigned int caddr; + + if (offset >= 0x1000) + return NULL; + + hose = pci_bus_to_host(bus); + if (!hose) + return NULL; + + if (bus->number == hose->first_busno) { + caddr = U4_PCIE_CFA0(dev_fn, offset); + } else + caddr = U4_PCIE_CFA1(bus->number, dev_fn, offset); + + /* Uninorth will return garbage if we don't read back the value ! */ + do { + out_le32(hose->cfg_addr, caddr); + } while (in_le32(hose->cfg_addr) != caddr); + + offset &= 0x03; + return hose->cfg_data + offset; +} + +static struct pci_ops u4_pcie_pci_ops = +{ + .map_bus = u4_pcie_cfg_map_bus, + .read = pci_generic_config_read, + .write = pci_generic_config_write, +}; + +static void pmac_pci_fixup_u4_of_node(struct pci_dev *dev) +{ + /* Apple's device-tree "hides" the root complex virtual P2P bridge + * on U4. However, Linux sees it, causing the PCI <-> OF matching + * code to fail to properly match devices below it. This works around + * it by setting the node of the bridge to point to the PHB node, + * which is not entirely correct but fixes the matching code and + * doesn't break anything else. It's also the simplest possible fix. + */ + if (dev->dev.of_node == NULL) + dev->dev.of_node = pcibios_get_phb_of_node(dev->bus); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_APPLE, 0x5b, pmac_pci_fixup_u4_of_node); + +#endif /* CONFIG_PPC64 */ + +#ifdef CONFIG_PPC32 +/* + * For a bandit bridge, turn on cache coherency if necessary. + * N.B. we could clean this up using the hose ops directly. + */ +static void __init init_bandit(struct pci_controller *bp) +{ + unsigned int vendev, magic; + int rev; + + /* read the word at offset 0 in config space for device 11 */ + out_le32(bp->cfg_addr, (1UL << BANDIT_DEVNUM) + PCI_VENDOR_ID); + udelay(2); + vendev = in_le32(bp->cfg_data); + if (vendev == (PCI_DEVICE_ID_APPLE_BANDIT << 16) + + PCI_VENDOR_ID_APPLE) { + /* read the revision id */ + out_le32(bp->cfg_addr, + (1UL << BANDIT_DEVNUM) + PCI_REVISION_ID); + udelay(2); + rev = in_8(bp->cfg_data); + if (rev != BANDIT_REVID) + printk(KERN_WARNING + "Unknown revision %d for bandit\n", rev); + } else if (vendev != (BANDIT_DEVID_2 << 16) + PCI_VENDOR_ID_APPLE) { + printk(KERN_WARNING "bandit isn't? (%x)\n", vendev); + return; + } + + /* read the word at offset 0x50 */ + out_le32(bp->cfg_addr, (1UL << BANDIT_DEVNUM) + BANDIT_MAGIC); + udelay(2); + magic = in_le32(bp->cfg_data); + if ((magic & BANDIT_COHERENT) != 0) + return; + magic |= BANDIT_COHERENT; + udelay(2); + out_le32(bp->cfg_data, magic); + printk(KERN_INFO "Cache coherency enabled for bandit/PSX\n"); +} + +/* + * Tweak the PCI-PCI bridge chip on the blue & white G3s. + */ +static void __init init_p2pbridge(void) +{ + struct device_node *p2pbridge; + struct pci_controller* hose; + u8 bus, devfn; + u16 val; + + /* XXX it would be better here to identify the specific + PCI-PCI bridge chip we have. */ + p2pbridge = of_find_node_by_name(NULL, "pci-bridge"); + if (p2pbridge == NULL || !of_node_name_eq(p2pbridge->parent, "pci")) + goto done; + if (pci_device_from_OF_node(p2pbridge, &bus, &devfn) < 0) { + DBG("Can't find PCI infos for PCI<->PCI bridge\n"); + goto done; + } + /* Warning: At this point, we have not yet renumbered all busses. + * So we must use OF walking to find out hose + */ + hose = pci_find_hose_for_OF_device(p2pbridge); + if (!hose) { + DBG("Can't find hose for PCI<->PCI bridge\n"); + goto done; + } + if (early_read_config_word(hose, bus, devfn, + PCI_BRIDGE_CONTROL, &val) < 0) { + printk(KERN_ERR "init_p2pbridge: couldn't read bridge" + " control\n"); + goto done; + } + val &= ~PCI_BRIDGE_CTL_MASTER_ABORT; + early_write_config_word(hose, bus, devfn, PCI_BRIDGE_CONTROL, val); +done: + of_node_put(p2pbridge); +} + +static void __init init_second_ohare(void) +{ + struct device_node *np = of_find_node_by_name(NULL, "pci106b,7"); + unsigned char bus, devfn; + unsigned short cmd; + + if (np == NULL) + return; + + /* This must run before we initialize the PICs since the second + * ohare hosts a PIC that will be accessed there. + */ + if (pci_device_from_OF_node(np, &bus, &devfn) == 0) { + struct pci_controller* hose = + pci_find_hose_for_OF_device(np); + if (!hose) { + printk(KERN_ERR "Can't find PCI hose for OHare2 !\n"); + of_node_put(np); + return; + } + early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + cmd &= ~PCI_COMMAND_IO; + early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd); + } + has_second_ohare = 1; + of_node_put(np); +} + +/* + * Some Apple desktop machines have a NEC PD720100A USB2 controller + * on the motherboard. Open Firmware, on these, will disable the + * EHCI part of it so it behaves like a pair of OHCI's. This fixup + * code re-enables it ;) + */ +static void __init fixup_nec_usb2(void) +{ + struct device_node *nec; + + for_each_node_by_name(nec, "usb") { + struct pci_controller *hose; + u32 data; + const u32 *prop; + u8 bus, devfn; + + prop = of_get_property(nec, "vendor-id", NULL); + if (prop == NULL) + continue; + if (0x1033 != *prop) + continue; + prop = of_get_property(nec, "device-id", NULL); + if (prop == NULL) + continue; + if (0x0035 != *prop) + continue; + prop = of_get_property(nec, "reg", NULL); + if (prop == NULL) + continue; + devfn = (prop[0] >> 8) & 0xff; + bus = (prop[0] >> 16) & 0xff; + if (PCI_FUNC(devfn) != 0) + continue; + hose = pci_find_hose_for_OF_device(nec); + if (!hose) + continue; + early_read_config_dword(hose, bus, devfn, 0xe4, &data); + if (data & 1UL) { + printk("Found NEC PD720100A USB2 chip with disabled" + " EHCI, fixing up...\n"); + data &= ~1UL; + early_write_config_dword(hose, bus, devfn, 0xe4, data); + } + } +} + +static void __init setup_bandit(struct pci_controller *hose, + struct resource *addr) +{ + hose->ops = ¯isc_pci_ops; + hose->cfg_addr = ioremap(addr->start + 0x800000, 0x1000); + hose->cfg_data = ioremap(addr->start + 0xc00000, 0x1000); + init_bandit(hose); +} + +static int __init setup_uninorth(struct pci_controller *hose, + struct resource *addr) +{ + pci_add_flags(PCI_REASSIGN_ALL_BUS); + has_uninorth = 1; + hose->ops = ¯isc_pci_ops; + hose->cfg_addr = ioremap(addr->start + 0x800000, 0x1000); + hose->cfg_data = ioremap(addr->start + 0xc00000, 0x1000); + /* We "know" that the bridge at f2000000 has the PCI slots. */ + return addr->start == 0xf2000000; +} +#endif /* CONFIG_PPC32 */ + +#ifdef CONFIG_PPC64 +static void __init setup_u3_agp(struct pci_controller* hose) +{ + /* On G5, we move AGP up to high bus number so we don't need + * to reassign bus numbers for HT. If we ever have P2P bridges + * on AGP, we'll have to move pci_assign_all_busses to the + * pci_controller structure so we enable it for AGP and not for + * HT childs. + * We hard code the address because of the different size of + * the reg address cell, we shall fix that by killing struct + * reg_property and using some accessor functions instead + */ + hose->first_busno = 0xf0; + hose->last_busno = 0xff; + has_uninorth = 1; + hose->ops = ¯isc_pci_ops; + hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); + hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); + u3_agp = hose; +} + +static void __init setup_u4_pcie(struct pci_controller* hose) +{ + /* We currently only implement the "non-atomic" config space, to + * be optimised later. + */ + hose->ops = &u4_pcie_pci_ops; + hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); + hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); + + /* The bus contains a bridge from root -> device, we need to + * make it visible on bus 0 so that we pick the right type + * of config cycles. If we didn't, we would have to force all + * config cycles to be type 1. So we override the "bus-range" + * property here + */ + hose->first_busno = 0x00; + hose->last_busno = 0xff; +} + +static void __init parse_region_decode(struct pci_controller *hose, + u32 decode) +{ + unsigned long base, end, next = -1; + int i, cur = -1; + + /* Iterate through all bits. We ignore the last bit as this region is + * reserved for the ROM among other niceties + */ + for (i = 0; i < 31; i++) { + if ((decode & (0x80000000 >> i)) == 0) + continue; + if (i < 16) { + base = 0xf0000000 | (((u32)i) << 24); + end = base + 0x00ffffff; + } else { + base = ((u32)i-16) << 28; + end = base + 0x0fffffff; + } + if (base != next) { + if (++cur >= 3) { + printk(KERN_WARNING "PCI: Too many ranges !\n"); + break; + } + hose->mem_resources[cur].flags = IORESOURCE_MEM; + hose->mem_resources[cur].name = hose->dn->full_name; + hose->mem_resources[cur].start = base; + hose->mem_resources[cur].end = end; + hose->mem_offset[cur] = 0; + DBG(" %d: 0x%08lx-0x%08lx\n", cur, base, end); + } else { + DBG(" : -0x%08lx\n", end); + hose->mem_resources[cur].end = end; + } + next = end + 1; + } +} + +static void __init setup_u3_ht(struct pci_controller* hose) +{ + struct device_node *np = hose->dn; + struct resource cfg_res, self_res; + u32 decode; + + hose->ops = &u3_ht_pci_ops; + + /* Get base addresses from OF tree + */ + if (of_address_to_resource(np, 0, &cfg_res) || + of_address_to_resource(np, 1, &self_res)) { + printk(KERN_ERR "PCI: Failed to get U3/U4 HT resources !\n"); + return; + } + + /* Map external cfg space access into cfg_data and self registers + * into cfg_addr + */ + hose->cfg_data = ioremap(cfg_res.start, 0x02000000); + hose->cfg_addr = ioremap(self_res.start, resource_size(&self_res)); + + /* + * /ht node doesn't expose a "ranges" property, we read the register + * that controls the decoding logic and use that for memory regions. + * The IO region is hard coded since it is fixed in HW as well. + */ + hose->io_base_phys = 0xf4000000; + hose->pci_io_size = 0x00400000; + hose->io_resource.name = np->full_name; + hose->io_resource.start = 0; + hose->io_resource.end = 0x003fffff; + hose->io_resource.flags = IORESOURCE_IO; + hose->first_busno = 0; + hose->last_busno = 0xef; + + /* Note: fix offset when cfg_addr becomes a void * */ + decode = in_be32(hose->cfg_addr + 0x80); + + DBG("PCI: Apple HT bridge decode register: 0x%08x\n", decode); + + /* NOTE: The decode register setup is a bit weird... region + * 0xf8000000 for example is marked as enabled in there while it's + & actually the memory controller registers. + * That means that we are incorrectly attributing it to HT. + * + * In a similar vein, region 0xf4000000 is actually the HT IO space but + * also marked as enabled in here and 0xf9000000 is used by some other + * internal bits of the northbridge. + * + * Unfortunately, we can't just mask out those bit as we would end + * up with more regions than we can cope (linux can only cope with + * 3 memory regions for a PHB at this stage). + * + * So for now, we just do a little hack. We happen to -know- that + * Apple firmware doesn't assign things below 0xfa000000 for that + * bridge anyway so we mask out all bits we don't want. + */ + decode &= 0x003fffff; + + /* Now parse the resulting bits and build resources */ + parse_region_decode(hose, decode); +} +#endif /* CONFIG_PPC64 */ + +/* + * We assume that if we have a G3 powermac, we have one bridge called + * "pci" (a MPC106) and no bandit or chaos bridges, and contrariwise, + * if we have one or more bandit or chaos bridges, we don't have a MPC106. + */ +static int __init pmac_add_bridge(struct device_node *dev) +{ + int len; + struct pci_controller *hose; + struct resource rsrc; + char *disp_name; + const int *bus_range; + int primary = 1; + + DBG("Adding PCI host bridge %pOF\n", dev); + + /* Fetch host bridge registers address */ + of_address_to_resource(dev, 0, &rsrc); + + /* Get bus range if any */ + bus_range = of_get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %pOF, assume" + " bus 0\n", dev); + } + + hose = pcibios_alloc_controller(dev); + if (!hose) + return -ENOMEM; + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + hose->controller_ops = pmac_pci_controller_ops; + + disp_name = NULL; + + /* 64 bits only bridges */ +#ifdef CONFIG_PPC64 + if (of_device_is_compatible(dev, "u3-agp")) { + setup_u3_agp(hose); + disp_name = "U3-AGP"; + primary = 0; + } else if (of_device_is_compatible(dev, "u3-ht")) { + setup_u3_ht(hose); + disp_name = "U3-HT"; + primary = 1; + } else if (of_device_is_compatible(dev, "u4-pcie")) { + setup_u4_pcie(hose); + disp_name = "U4-PCIE"; + primary = 0; + } + printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number:" + " %d->%d\n", disp_name, hose->first_busno, hose->last_busno); +#endif /* CONFIG_PPC64 */ + + /* 32 bits only bridges */ +#ifdef CONFIG_PPC32 + if (of_device_is_compatible(dev, "uni-north")) { + primary = setup_uninorth(hose, &rsrc); + disp_name = "UniNorth"; + } else if (of_node_name_eq(dev, "pci")) { + /* XXX assume this is a mpc106 (grackle) */ + setup_grackle(hose); + disp_name = "Grackle (MPC106)"; + } else if (of_node_name_eq(dev, "bandit")) { + setup_bandit(hose, &rsrc); + disp_name = "Bandit"; + } else if (of_node_name_eq(dev, "chaos")) { + setup_chaos(hose, &rsrc); + disp_name = "Chaos"; + primary = 0; + } + printk(KERN_INFO "Found %s PCI host bridge at 0x%016llx. " + "Firmware bus number: %d->%d\n", + disp_name, (unsigned long long)rsrc.start, hose->first_busno, + hose->last_busno); +#endif /* CONFIG_PPC32 */ + + DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", + hose, hose->cfg_addr, hose->cfg_data); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, primary); + + /* Fixup "bus-range" OF property */ + fixup_bus_range(dev); + + return 0; +} + +void pmac_pci_irq_fixup(struct pci_dev *dev) +{ +#ifdef CONFIG_PPC32 + /* Fixup interrupt for the modem/ethernet combo controller. + * on machines with a second ohare chip. + * The number in the device tree (27) is bogus (correct for + * the ethernet-only board but not the combo ethernet/modem + * board). The real interrupt is 28 on the second controller + * -> 28+32 = 60. + */ + if (has_second_ohare && + dev->vendor == PCI_VENDOR_ID_DEC && + dev->device == PCI_DEVICE_ID_DEC_TULIP_PLUS) { + dev->irq = irq_create_mapping(NULL, 60); + irq_set_irq_type(dev->irq, IRQ_TYPE_LEVEL_LOW); + } +#endif /* CONFIG_PPC32 */ +} + +#ifdef CONFIG_PPC64 +static int pmac_pci_root_bridge_prepare(struct pci_host_bridge *bridge) +{ + struct pci_controller *hose = pci_bus_to_host(bridge->bus); + struct device_node *np, *child; + + if (hose != u3_agp) + return 0; + + /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We + * assume there is no P2P bridge on the AGP bus, which should be a + * safe assumptions for now. We should do something better in the + * future though + */ + np = hose->dn; + PCI_DN(np)->busno = 0xf0; + for_each_child_of_node(np, child) + PCI_DN(child)->busno = 0xf0; + + return 0; +} +#endif /* CONFIG_PPC64 */ + +void __init pmac_pci_init(void) +{ + struct device_node *np, *root; + struct device_node *ht __maybe_unused = NULL; + + pci_set_flags(PCI_CAN_SKIP_ISA_ALIGN); + + root = of_find_node_by_path("/"); + if (root == NULL) { + printk(KERN_CRIT "pmac_pci_init: can't find root " + "of device tree\n"); + return; + } + for_each_child_of_node(root, np) { + if (of_node_name_eq(np, "bandit") + || of_node_name_eq(np, "chaos") + || of_node_name_eq(np, "pci")) { + if (pmac_add_bridge(np) == 0) + of_node_get(np); + } + if (of_node_name_eq(np, "ht")) { + of_node_get(np); + ht = np; + } + } + of_node_put(root); + +#ifdef CONFIG_PPC64 + /* Probe HT last as it relies on the agp resources to be already + * setup + */ + if (ht && pmac_add_bridge(ht) != 0) + of_node_put(ht); + + ppc_md.pcibios_root_bridge_prepare = pmac_pci_root_bridge_prepare; + /* pmac_check_ht_link(); */ + +#else /* CONFIG_PPC64 */ + init_p2pbridge(); + init_second_ohare(); + fixup_nec_usb2(); + + /* We are still having some issues with the Xserve G4, enabling + * some offset between bus number and domains for now when we + * assign all busses should help for now + */ + if (pci_has_flag(PCI_REASSIGN_ALL_BUS)) + pcibios_assign_bus_offset = 0x10; +#endif +} + +#ifdef CONFIG_PPC32 +static bool pmac_pci_enable_device_hook(struct pci_dev *dev) +{ + struct device_node* node; + int updatecfg = 0; + int uninorth_child; + + node = pci_device_to_OF_node(dev); + + /* We don't want to enable USB controllers absent from the OF tree + * (iBook second controller) + */ + if (dev->vendor == PCI_VENDOR_ID_APPLE + && dev->class == PCI_CLASS_SERIAL_USB_OHCI + && !node) { + printk(KERN_INFO "Apple USB OHCI %s disabled by firmware\n", + pci_name(dev)); + return false; + } + + if (!node) + return true; + + uninorth_child = node->parent && + of_device_is_compatible(node->parent, "uni-north"); + + /* Firewire & GMAC were disabled after PCI probe, the driver is + * claiming them, we must re-enable them now. + */ + if (uninorth_child && of_node_name_eq(node, "firewire") && + (of_device_is_compatible(node, "pci106b,18") || + of_device_is_compatible(node, "pci106b,30") || + of_device_is_compatible(node, "pci11c1,5811"))) { + pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, node, 0, 1); + pmac_call_feature(PMAC_FTR_1394_ENABLE, node, 0, 1); + updatecfg = 1; + } + if (uninorth_child && of_node_name_eq(node, "ethernet") && + of_device_is_compatible(node, "gmac")) { + pmac_call_feature(PMAC_FTR_GMAC_ENABLE, node, 0, 1); + updatecfg = 1; + } + + /* + * Fixup various header fields on 32 bits. We don't do that on + * 64 bits as some of these have strange values behind the HT + * bridge and we must not, for example, enable MWI or set the + * cache line size on them. + */ + if (updatecfg) { + u16 cmd; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER + | PCI_COMMAND_INVALIDATE; + pci_write_config_word(dev, PCI_COMMAND, cmd); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 16); + + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, + L1_CACHE_BYTES >> 2); + } + + return true; +} + +static void pmac_pci_fixup_ohci(struct pci_dev *dev) +{ + struct device_node *node = pci_device_to_OF_node(dev); + + /* We don't want to assign resources to USB controllers + * absent from the OF tree (iBook second controller) + */ + if (dev->class == PCI_CLASS_SERIAL_USB_OHCI && !node) + dev->resource[0].flags = 0; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_APPLE, PCI_ANY_ID, pmac_pci_fixup_ohci); + +/* We power down some devices after they have been probed. They'll + * be powered back on later on + */ +void __init pmac_pcibios_after_init(void) +{ + struct device_node* nd; + + for_each_node_by_name(nd, "firewire") { + if (nd->parent && (of_device_is_compatible(nd, "pci106b,18") || + of_device_is_compatible(nd, "pci106b,30") || + of_device_is_compatible(nd, "pci11c1,5811")) + && of_device_is_compatible(nd->parent, "uni-north")) { + pmac_call_feature(PMAC_FTR_1394_ENABLE, nd, 0, 0); + pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, nd, 0, 0); + } + } + for_each_node_by_name(nd, "ethernet") { + if (nd->parent && of_device_is_compatible(nd, "gmac") + && of_device_is_compatible(nd->parent, "uni-north")) + pmac_call_feature(PMAC_FTR_GMAC_ENABLE, nd, 0, 0); + } +} + +static void pmac_pci_fixup_cardbus(struct pci_dev *dev) +{ + if (!machine_is(powermac)) + return; + /* + * Fix the interrupt routing on the various cardbus bridges + * used on powerbooks + */ + if (dev->vendor != PCI_VENDOR_ID_TI) + return; + if (dev->device == PCI_DEVICE_ID_TI_1130 || + dev->device == PCI_DEVICE_ID_TI_1131) { + u8 val; + /* Enable PCI interrupt */ + if (pci_read_config_byte(dev, 0x91, &val) == 0) + pci_write_config_byte(dev, 0x91, val | 0x30); + /* Disable ISA interrupt mode */ + if (pci_read_config_byte(dev, 0x92, &val) == 0) + pci_write_config_byte(dev, 0x92, val & ~0x06); + } + if (dev->device == PCI_DEVICE_ID_TI_1210 || + dev->device == PCI_DEVICE_ID_TI_1211 || + dev->device == PCI_DEVICE_ID_TI_1410 || + dev->device == PCI_DEVICE_ID_TI_1510) { + u8 val; + /* 0x8c == TI122X_IRQMUX, 2 says to route the INTA + signal out the MFUNC0 pin */ + if (pci_read_config_byte(dev, 0x8c, &val) == 0) + pci_write_config_byte(dev, 0x8c, (val & ~0x0f) | 2); + /* Disable ISA interrupt mode */ + if (pci_read_config_byte(dev, 0x92, &val) == 0) + pci_write_config_byte(dev, 0x92, val & ~0x06); + } +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_ANY_ID, pmac_pci_fixup_cardbus); + +static void pmac_pci_fixup_pciata(struct pci_dev *dev) +{ + u8 progif = 0; + + /* + * On PowerMacs, we try to switch any PCI ATA controller to + * fully native mode + */ + if (!machine_is(powermac)) + return; + + /* Some controllers don't have the class IDE */ + if (dev->vendor == PCI_VENDOR_ID_PROMISE) + switch(dev->device) { + case PCI_DEVICE_ID_PROMISE_20246: + case PCI_DEVICE_ID_PROMISE_20262: + case PCI_DEVICE_ID_PROMISE_20263: + case PCI_DEVICE_ID_PROMISE_20265: + case PCI_DEVICE_ID_PROMISE_20267: + case PCI_DEVICE_ID_PROMISE_20268: + case PCI_DEVICE_ID_PROMISE_20269: + case PCI_DEVICE_ID_PROMISE_20270: + case PCI_DEVICE_ID_PROMISE_20271: + case PCI_DEVICE_ID_PROMISE_20275: + case PCI_DEVICE_ID_PROMISE_20276: + case PCI_DEVICE_ID_PROMISE_20277: + goto good; + } + /* Others, check PCI class */ + if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) + return; + good: + pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); + if ((progif & 5) != 5) { + printk(KERN_INFO "PCI: %s Forcing PCI IDE into native mode\n", + pci_name(dev)); + (void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5); + if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) || + (progif & 5) != 5) + printk(KERN_ERR "Rewrite of PROGIF failed !\n"); + else { + /* Clear IO BARs, they will be reassigned */ + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_2, 0); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_3, 0); + } + } +} +DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, pmac_pci_fixup_pciata); +#endif /* CONFIG_PPC32 */ + +/* + * Disable second function on K2-SATA, it's broken + * and disable IO BARs on first one + */ +static void fixup_k2_sata(struct pci_dev* dev) +{ + int i; + u16 cmd; + + if (PCI_FUNC(dev->devfn) > 0) { + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY); + pci_write_config_word(dev, PCI_COMMAND, cmd); + for (i = 0; i < 6; i++) { + dev->resource[i].start = dev->resource[i].end = 0; + dev->resource[i].flags = 0; + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, + 0); + } + } else { + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd &= ~PCI_COMMAND_IO; + pci_write_config_word(dev, PCI_COMMAND, cmd); + for (i = 0; i < 5; i++) { + dev->resource[i].start = dev->resource[i].end = 0; + dev->resource[i].flags = 0; + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, + 0); + } + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 0x0240, fixup_k2_sata); + +/* + * On U4 (aka CPC945) the PCIe root complex "P2P" bridge resource ranges aren't + * configured by the firmware. The bridge itself seems to ignore them but it + * causes problems with Linux which then re-assigns devices below the bridge, + * thus changing addresses of those devices from what was in the device-tree, + * which sucks when those are video cards using offb + * + * We could just mark it transparent but I prefer fixing up the resources to + * properly show what's going on here, as I have some doubts about having them + * badly configured potentially being an issue for DMA. + * + * We leave PIO alone, it seems to be fine + * + * Oh and there's another funny bug. The OF properties advertize the region + * 0xf1000000..0xf1ffffff as being forwarded as memory space. But that's + * actually not true, this region is the memory mapped config space. So we + * also need to filter it out or we'll map things in the wrong place. + */ +static void fixup_u4_pcie(struct pci_dev* dev) +{ + struct pci_controller *host = pci_bus_to_host(dev->bus); + struct resource *region = NULL; + u32 reg; + int i; + + /* Only do that on PowerMac */ + if (!machine_is(powermac)) + return; + + /* Find the largest MMIO region */ + for (i = 0; i < 3; i++) { + struct resource *r = &host->mem_resources[i]; + if (!(r->flags & IORESOURCE_MEM)) + continue; + /* Skip the 0xf0xxxxxx..f2xxxxxx regions, we know they + * are reserved by HW for other things + */ + if (r->start >= 0xf0000000 && r->start < 0xf3000000) + continue; + if (!region || resource_size(r) > resource_size(region)) + region = r; + } + /* Nothing found, bail */ + if (!region) + return; + + /* Print things out */ + printk(KERN_INFO "PCI: Fixup U4 PCIe bridge range: %pR\n", region); + + /* Fixup bridge config space. We know it's a Mac, resource aren't + * offset so let's just blast them as-is. We also know that they + * fit in 32 bits + */ + reg = ((region->start >> 16) & 0xfff0) | (region->end & 0xfff00000); + pci_write_config_dword(dev, PCI_MEMORY_BASE, reg); + pci_write_config_dword(dev, PCI_PREF_BASE_UPPER32, 0); + pci_write_config_dword(dev, PCI_PREF_LIMIT_UPPER32, 0); + pci_write_config_dword(dev, PCI_PREF_MEMORY_BASE, 0); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_U4_PCIE, fixup_u4_pcie); + +#ifdef CONFIG_PPC64 +static int pmac_pci_probe_mode(struct pci_bus *bus) +{ + struct device_node *node = pci_bus_to_OF_node(bus); + + /* We need to use normal PCI probing for the AGP bus, + * since the device for the AGP bridge isn't in the tree. + * Same for the PCIe host on U4 and the HT host bridge. + */ + if (bus->self == NULL && (of_device_is_compatible(node, "u3-agp") || + of_device_is_compatible(node, "u4-pcie") || + of_device_is_compatible(node, "u3-ht"))) + return PCI_PROBE_NORMAL; + return PCI_PROBE_DEVTREE; +} +#endif /* CONFIG_PPC64 */ + +struct pci_controller_ops pmac_pci_controller_ops = { +#ifdef CONFIG_PPC64 + .probe_mode = pmac_pci_probe_mode, +#endif +#ifdef CONFIG_PPC32 + .enable_device_hook = pmac_pci_enable_device_hook, +#endif +}; diff --git a/arch/powerpc/platforms/powermac/pfunc_base.c b/arch/powerpc/platforms/powermac/pfunc_base.c new file mode 100644 index 000000000..f5422506d --- /dev/null +++ b/arch/powerpc/platforms/powermac/pfunc_base.c @@ -0,0 +1,410 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/types.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/of_irq.h> + +#include <asm/pmac_feature.h> +#include <asm/pmac_pfunc.h> + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) printk(fmt) +#else +#define DBG(fmt...) +#endif + +static irqreturn_t macio_gpio_irq(int irq, void *data) +{ + pmf_do_irq(data); + + return IRQ_HANDLED; +} + +static int macio_do_gpio_irq_enable(struct pmf_function *func) +{ + unsigned int irq = irq_of_parse_and_map(func->node, 0); + if (!irq) + return -EINVAL; + return request_irq(irq, macio_gpio_irq, 0, func->node->name, func); +} + +static int macio_do_gpio_irq_disable(struct pmf_function *func) +{ + unsigned int irq = irq_of_parse_and_map(func->node, 0); + if (!irq) + return -EINVAL; + free_irq(irq, func); + return 0; +} + +static int macio_do_gpio_write(PMF_STD_ARGS, u8 value, u8 mask) +{ + u8 __iomem *addr = (u8 __iomem *)func->driver_data; + unsigned long flags; + u8 tmp; + + /* Check polarity */ + if (args && args->count && !args->u[0].v) + value = ~value; + + /* Toggle the GPIO */ + raw_spin_lock_irqsave(&feature_lock, flags); + tmp = readb(addr); + tmp = (tmp & ~mask) | (value & mask); + DBG("Do write 0x%02x to GPIO %pOF (%p)\n", + tmp, func->node, addr); + writeb(tmp, addr); + raw_spin_unlock_irqrestore(&feature_lock, flags); + + return 0; +} + +static int macio_do_gpio_read(PMF_STD_ARGS, u8 mask, int rshift, u8 xor) +{ + u8 __iomem *addr = (u8 __iomem *)func->driver_data; + u32 value; + + /* Check if we have room for reply */ + if (args == NULL || args->count == 0 || args->u[0].p == NULL) + return -EINVAL; + + value = readb(addr); + *args->u[0].p = ((value & mask) >> rshift) ^ xor; + + return 0; +} + +static int macio_do_delay(PMF_STD_ARGS, u32 duration) +{ + /* assume we can sleep ! */ + msleep((duration + 999) / 1000); + return 0; +} + +static struct pmf_handlers macio_gpio_handlers = { + .irq_enable = macio_do_gpio_irq_enable, + .irq_disable = macio_do_gpio_irq_disable, + .write_gpio = macio_do_gpio_write, + .read_gpio = macio_do_gpio_read, + .delay = macio_do_delay, +}; + +static void macio_gpio_init_one(struct macio_chip *macio) +{ + struct device_node *gparent, *gp; + + /* + * Find the "gpio" parent node + */ + + for_each_child_of_node(macio->of_node, gparent) + if (of_node_name_eq(gparent, "gpio")) + break; + if (gparent == NULL) + return; + + DBG("Installing GPIO functions for macio %pOF\n", + macio->of_node); + + /* + * Ok, got one, we dont need anything special to track them down, so + * we just create them all + */ + for_each_child_of_node(gparent, gp) { + const u32 *reg = of_get_property(gp, "reg", NULL); + unsigned long offset; + if (reg == NULL) + continue; + offset = *reg; + /* Deal with old style device-tree. We can safely hard code the + * offset for now too even if it's a bit gross ... + */ + if (offset < 0x50) + offset += 0x50; + offset += (unsigned long)macio->base; + pmf_register_driver(gp, &macio_gpio_handlers, (void *)offset); + } + + DBG("Calling initial GPIO functions for macio %pOF\n", + macio->of_node); + + /* And now we run all the init ones */ + for_each_child_of_node(gparent, gp) + pmf_do_functions(gp, NULL, 0, PMF_FLAGS_ON_INIT, NULL); + + /* Note: We do not at this point implement the "at sleep" or "at wake" + * functions. I yet to find any for GPIOs anyway + */ +} + +static int macio_do_write_reg32(PMF_STD_ARGS, u32 offset, u32 value, u32 mask) +{ + struct macio_chip *macio = func->driver_data; + unsigned long flags; + + raw_spin_lock_irqsave(&feature_lock, flags); + MACIO_OUT32(offset, (MACIO_IN32(offset) & ~mask) | (value & mask)); + raw_spin_unlock_irqrestore(&feature_lock, flags); + return 0; +} + +static int macio_do_read_reg32(PMF_STD_ARGS, u32 offset) +{ + struct macio_chip *macio = func->driver_data; + + /* Check if we have room for reply */ + if (args == NULL || args->count == 0 || args->u[0].p == NULL) + return -EINVAL; + + *args->u[0].p = MACIO_IN32(offset); + return 0; +} + +static int macio_do_write_reg8(PMF_STD_ARGS, u32 offset, u8 value, u8 mask) +{ + struct macio_chip *macio = func->driver_data; + unsigned long flags; + + raw_spin_lock_irqsave(&feature_lock, flags); + MACIO_OUT8(offset, (MACIO_IN8(offset) & ~mask) | (value & mask)); + raw_spin_unlock_irqrestore(&feature_lock, flags); + return 0; +} + +static int macio_do_read_reg8(PMF_STD_ARGS, u32 offset) +{ + struct macio_chip *macio = func->driver_data; + + /* Check if we have room for reply */ + if (args == NULL || args->count == 0 || args->u[0].p == NULL) + return -EINVAL; + + *((u8 *)(args->u[0].p)) = MACIO_IN8(offset); + return 0; +} + +static int macio_do_read_reg32_msrx(PMF_STD_ARGS, u32 offset, u32 mask, + u32 shift, u32 xor) +{ + struct macio_chip *macio = func->driver_data; + + /* Check if we have room for reply */ + if (args == NULL || args->count == 0 || args->u[0].p == NULL) + return -EINVAL; + + *args->u[0].p = ((MACIO_IN32(offset) & mask) >> shift) ^ xor; + return 0; +} + +static int macio_do_read_reg8_msrx(PMF_STD_ARGS, u32 offset, u32 mask, + u32 shift, u32 xor) +{ + struct macio_chip *macio = func->driver_data; + + /* Check if we have room for reply */ + if (args == NULL || args->count == 0 || args->u[0].p == NULL) + return -EINVAL; + + *((u8 *)(args->u[0].p)) = ((MACIO_IN8(offset) & mask) >> shift) ^ xor; + return 0; +} + +static int macio_do_write_reg32_slm(PMF_STD_ARGS, u32 offset, u32 shift, + u32 mask) +{ + struct macio_chip *macio = func->driver_data; + unsigned long flags; + u32 tmp, val; + + /* Check args */ + if (args == NULL || args->count == 0) + return -EINVAL; + + raw_spin_lock_irqsave(&feature_lock, flags); + tmp = MACIO_IN32(offset); + val = args->u[0].v << shift; + tmp = (tmp & ~mask) | (val & mask); + MACIO_OUT32(offset, tmp); + raw_spin_unlock_irqrestore(&feature_lock, flags); + return 0; +} + +static int macio_do_write_reg8_slm(PMF_STD_ARGS, u32 offset, u32 shift, + u32 mask) +{ + struct macio_chip *macio = func->driver_data; + unsigned long flags; + u32 tmp, val; + + /* Check args */ + if (args == NULL || args->count == 0) + return -EINVAL; + + raw_spin_lock_irqsave(&feature_lock, flags); + tmp = MACIO_IN8(offset); + val = args->u[0].v << shift; + tmp = (tmp & ~mask) | (val & mask); + MACIO_OUT8(offset, tmp); + raw_spin_unlock_irqrestore(&feature_lock, flags); + return 0; +} + +static struct pmf_handlers macio_mmio_handlers = { + .write_reg32 = macio_do_write_reg32, + .read_reg32 = macio_do_read_reg32, + .write_reg8 = macio_do_write_reg8, + .read_reg8 = macio_do_read_reg8, + .read_reg32_msrx = macio_do_read_reg32_msrx, + .read_reg8_msrx = macio_do_read_reg8_msrx, + .write_reg32_slm = macio_do_write_reg32_slm, + .write_reg8_slm = macio_do_write_reg8_slm, + .delay = macio_do_delay, +}; + +static void macio_mmio_init_one(struct macio_chip *macio) +{ + DBG("Installing MMIO functions for macio %pOF\n", + macio->of_node); + + pmf_register_driver(macio->of_node, &macio_mmio_handlers, macio); +} + +static struct device_node *unin_hwclock; + +static int unin_do_write_reg32(PMF_STD_ARGS, u32 offset, u32 value, u32 mask) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&feature_lock, flags); + /* This is fairly bogus in darwin, but it should work for our needs + * implemeted that way: + */ + UN_OUT(offset, (UN_IN(offset) & ~mask) | (value & mask)); + raw_spin_unlock_irqrestore(&feature_lock, flags); + return 0; +} + + +static struct pmf_handlers unin_mmio_handlers = { + .write_reg32 = unin_do_write_reg32, + .delay = macio_do_delay, +}; + +static void uninorth_install_pfunc(void) +{ + struct device_node *np; + + DBG("Installing functions for UniN %pOF\n", + uninorth_node); + + /* + * Install handlers for the bridge itself + */ + pmf_register_driver(uninorth_node, &unin_mmio_handlers, NULL); + pmf_do_functions(uninorth_node, NULL, 0, PMF_FLAGS_ON_INIT, NULL); + + + /* + * Install handlers for the hwclock child if any + */ + for (np = NULL; (np = of_get_next_child(uninorth_node, np)) != NULL;) + if (of_node_name_eq(np, "hw-clock")) { + unin_hwclock = np; + break; + } + if (unin_hwclock) { + DBG("Installing functions for UniN clock %pOF\n", + unin_hwclock); + pmf_register_driver(unin_hwclock, &unin_mmio_handlers, NULL); + pmf_do_functions(unin_hwclock, NULL, 0, PMF_FLAGS_ON_INIT, + NULL); + } +} + +/* We export this as the SMP code might init us early */ +int __init pmac_pfunc_base_install(void) +{ + static int pfbase_inited; + int i; + + if (pfbase_inited) + return 0; + pfbase_inited = 1; + + if (!machine_is(powermac)) + return 0; + + DBG("Installing base platform functions...\n"); + + /* + * Locate mac-io chips and install handlers + */ + for (i = 0 ; i < MAX_MACIO_CHIPS; i++) { + if (macio_chips[i].of_node) { + macio_mmio_init_one(&macio_chips[i]); + macio_gpio_init_one(&macio_chips[i]); + } + } + + /* + * Install handlers for northbridge and direct mapped hwclock + * if any. We do not implement the config space access callback + * which is only ever used for functions that we do not call in + * the current driver (enabling/disabling cells in U2, mostly used + * to restore the PCI settings, we do that differently) + */ + if (uninorth_node && uninorth_base) + uninorth_install_pfunc(); + + DBG("All base functions installed\n"); + + return 0; +} +machine_arch_initcall(powermac, pmac_pfunc_base_install); + +#ifdef CONFIG_PM + +/* Those can be called by pmac_feature. Ultimately, I should use a sysdev + * or a device, but for now, that's good enough until I sort out some + * ordering issues. Also, we do not bother with GPIOs, as so far I yet have + * to see a case where a GPIO function has the on-suspend or on-resume bit + */ +void pmac_pfunc_base_suspend(void) +{ + int i; + + for (i = 0 ; i < MAX_MACIO_CHIPS; i++) { + if (macio_chips[i].of_node) + pmf_do_functions(macio_chips[i].of_node, NULL, 0, + PMF_FLAGS_ON_SLEEP, NULL); + } + if (uninorth_node) + pmf_do_functions(uninorth_node, NULL, 0, + PMF_FLAGS_ON_SLEEP, NULL); + if (unin_hwclock) + pmf_do_functions(unin_hwclock, NULL, 0, + PMF_FLAGS_ON_SLEEP, NULL); +} + +void pmac_pfunc_base_resume(void) +{ + int i; + + if (unin_hwclock) + pmf_do_functions(unin_hwclock, NULL, 0, + PMF_FLAGS_ON_WAKE, NULL); + if (uninorth_node) + pmf_do_functions(uninorth_node, NULL, 0, + PMF_FLAGS_ON_WAKE, NULL); + for (i = 0 ; i < MAX_MACIO_CHIPS; i++) { + if (macio_chips[i].of_node) + pmf_do_functions(macio_chips[i].of_node, NULL, 0, + PMF_FLAGS_ON_WAKE, NULL); + } +} + +#endif /* CONFIG_PM */ diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c new file mode 100644 index 000000000..94df0a91b --- /dev/null +++ b/arch/powerpc/platforms/powermac/pfunc_core.c @@ -0,0 +1,1022 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * + * FIXME: Properly make this race free with refcounting etc... + * + * FIXME: LOCKING !!! + */ + +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/mutex.h> + +#include <asm/prom.h> +#include <asm/pmac_pfunc.h> + +/* Debug */ +#define LOG_PARSE(fmt...) +#define LOG_ERROR(fmt...) printk(fmt) +#define LOG_BLOB(t,b,c) + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) printk(fmt) +#else +#define DBG(fmt...) +#endif + +/* Command numbers */ +#define PMF_CMD_LIST 0 +#define PMF_CMD_WRITE_GPIO 1 +#define PMF_CMD_READ_GPIO 2 +#define PMF_CMD_WRITE_REG32 3 +#define PMF_CMD_READ_REG32 4 +#define PMF_CMD_WRITE_REG16 5 +#define PMF_CMD_READ_REG16 6 +#define PMF_CMD_WRITE_REG8 7 +#define PMF_CMD_READ_REG8 8 +#define PMF_CMD_DELAY 9 +#define PMF_CMD_WAIT_REG32 10 +#define PMF_CMD_WAIT_REG16 11 +#define PMF_CMD_WAIT_REG8 12 +#define PMF_CMD_READ_I2C 13 +#define PMF_CMD_WRITE_I2C 14 +#define PMF_CMD_RMW_I2C 15 +#define PMF_CMD_GEN_I2C 16 +#define PMF_CMD_SHIFT_BYTES_RIGHT 17 +#define PMF_CMD_SHIFT_BYTES_LEFT 18 +#define PMF_CMD_READ_CFG 19 +#define PMF_CMD_WRITE_CFG 20 +#define PMF_CMD_RMW_CFG 21 +#define PMF_CMD_READ_I2C_SUBADDR 22 +#define PMF_CMD_WRITE_I2C_SUBADDR 23 +#define PMF_CMD_SET_I2C_MODE 24 +#define PMF_CMD_RMW_I2C_SUBADDR 25 +#define PMF_CMD_READ_REG32_MASK_SHR_XOR 26 +#define PMF_CMD_READ_REG16_MASK_SHR_XOR 27 +#define PMF_CMD_READ_REG8_MASK_SHR_XOR 28 +#define PMF_CMD_WRITE_REG32_SHL_MASK 29 +#define PMF_CMD_WRITE_REG16_SHL_MASK 30 +#define PMF_CMD_WRITE_REG8_SHL_MASK 31 +#define PMF_CMD_MASK_AND_COMPARE 32 +#define PMF_CMD_COUNT 33 + +/* This structure holds the state of the parser while walking through + * a function definition + */ +struct pmf_cmd { + const void *cmdptr; + const void *cmdend; + struct pmf_function *func; + void *instdata; + struct pmf_args *args; + int error; +}; + +#if 0 +/* Debug output */ +static void print_blob(const char *title, const void *blob, int bytes) +{ + printk("%s", title); + while(bytes--) { + printk("%02x ", *((u8 *)blob)); + blob += 1; + } + printk("\n"); +} +#endif + +/* + * Parser helpers + */ + +static u32 pmf_next32(struct pmf_cmd *cmd) +{ + u32 value; + if ((cmd->cmdend - cmd->cmdptr) < 4) { + cmd->error = 1; + return 0; + } + value = *((u32 *)cmd->cmdptr); + cmd->cmdptr += 4; + return value; +} + +static const void* pmf_next_blob(struct pmf_cmd *cmd, int count) +{ + const void *value; + if ((cmd->cmdend - cmd->cmdptr) < count) { + cmd->error = 1; + return NULL; + } + value = cmd->cmdptr; + cmd->cmdptr += count; + return value; +} + +/* + * Individual command parsers + */ + +#define PMF_PARSE_CALL(name, cmd, handlers, p...) \ + do { \ + if (cmd->error) \ + return -ENXIO; \ + if (handlers == NULL) \ + return 0; \ + if (handlers->name) \ + return handlers->name(cmd->func, cmd->instdata, \ + cmd->args, p); \ + return -1; \ + } while(0) \ + + +static int pmf_parser_write_gpio(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u8 value = (u8)pmf_next32(cmd); + u8 mask = (u8)pmf_next32(cmd); + + LOG_PARSE("pmf: write_gpio(value: %02x, mask: %02x)\n", value, mask); + + PMF_PARSE_CALL(write_gpio, cmd, h, value, mask); +} + +static int pmf_parser_read_gpio(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u8 mask = (u8)pmf_next32(cmd); + int rshift = (int)pmf_next32(cmd); + u8 xor = (u8)pmf_next32(cmd); + + LOG_PARSE("pmf: read_gpio(mask: %02x, rshift: %d, xor: %02x)\n", + mask, rshift, xor); + + PMF_PARSE_CALL(read_gpio, cmd, h, mask, rshift, xor); +} + +static int pmf_parser_write_reg32(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u32 value = pmf_next32(cmd); + u32 mask = pmf_next32(cmd); + + LOG_PARSE("pmf: write_reg32(offset: %08x, value: %08x, mask: %08x)\n", + offset, value, mask); + + PMF_PARSE_CALL(write_reg32, cmd, h, offset, value, mask); +} + +static int pmf_parser_read_reg32(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + + LOG_PARSE("pmf: read_reg32(offset: %08x)\n", offset); + + PMF_PARSE_CALL(read_reg32, cmd, h, offset); +} + + +static int pmf_parser_write_reg16(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u16 value = (u16)pmf_next32(cmd); + u16 mask = (u16)pmf_next32(cmd); + + LOG_PARSE("pmf: write_reg16(offset: %08x, value: %04x, mask: %04x)\n", + offset, value, mask); + + PMF_PARSE_CALL(write_reg16, cmd, h, offset, value, mask); +} + +static int pmf_parser_read_reg16(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + + LOG_PARSE("pmf: read_reg16(offset: %08x)\n", offset); + + PMF_PARSE_CALL(read_reg16, cmd, h, offset); +} + + +static int pmf_parser_write_reg8(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u8 value = (u16)pmf_next32(cmd); + u8 mask = (u16)pmf_next32(cmd); + + LOG_PARSE("pmf: write_reg8(offset: %08x, value: %02x, mask: %02x)\n", + offset, value, mask); + + PMF_PARSE_CALL(write_reg8, cmd, h, offset, value, mask); +} + +static int pmf_parser_read_reg8(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + + LOG_PARSE("pmf: read_reg8(offset: %08x)\n", offset); + + PMF_PARSE_CALL(read_reg8, cmd, h, offset); +} + +static int pmf_parser_delay(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 duration = pmf_next32(cmd); + + LOG_PARSE("pmf: delay(duration: %d us)\n", duration); + + PMF_PARSE_CALL(delay, cmd, h, duration); +} + +static int pmf_parser_wait_reg32(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u32 value = pmf_next32(cmd); + u32 mask = pmf_next32(cmd); + + LOG_PARSE("pmf: wait_reg32(offset: %08x, comp_value: %08x,mask: %08x)\n", + offset, value, mask); + + PMF_PARSE_CALL(wait_reg32, cmd, h, offset, value, mask); +} + +static int pmf_parser_wait_reg16(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u16 value = (u16)pmf_next32(cmd); + u16 mask = (u16)pmf_next32(cmd); + + LOG_PARSE("pmf: wait_reg16(offset: %08x, comp_value: %04x,mask: %04x)\n", + offset, value, mask); + + PMF_PARSE_CALL(wait_reg16, cmd, h, offset, value, mask); +} + +static int pmf_parser_wait_reg8(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u8 value = (u8)pmf_next32(cmd); + u8 mask = (u8)pmf_next32(cmd); + + LOG_PARSE("pmf: wait_reg8(offset: %08x, comp_value: %02x,mask: %02x)\n", + offset, value, mask); + + PMF_PARSE_CALL(wait_reg8, cmd, h, offset, value, mask); +} + +static int pmf_parser_read_i2c(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 bytes = pmf_next32(cmd); + + LOG_PARSE("pmf: read_i2c(bytes: %ud)\n", bytes); + + PMF_PARSE_CALL(read_i2c, cmd, h, bytes); +} + +static int pmf_parser_write_i2c(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 bytes = pmf_next32(cmd); + const void *blob = pmf_next_blob(cmd, bytes); + + LOG_PARSE("pmf: write_i2c(bytes: %ud) ...\n", bytes); + LOG_BLOB("pmf: data: \n", blob, bytes); + + PMF_PARSE_CALL(write_i2c, cmd, h, bytes, blob); +} + + +static int pmf_parser_rmw_i2c(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 maskbytes = pmf_next32(cmd); + u32 valuesbytes = pmf_next32(cmd); + u32 totalbytes = pmf_next32(cmd); + const void *maskblob = pmf_next_blob(cmd, maskbytes); + const void *valuesblob = pmf_next_blob(cmd, valuesbytes); + + LOG_PARSE("pmf: rmw_i2c(maskbytes: %ud, valuebytes: %ud, " + "totalbytes: %d) ...\n", + maskbytes, valuesbytes, totalbytes); + LOG_BLOB("pmf: mask data: \n", maskblob, maskbytes); + LOG_BLOB("pmf: values data: \n", valuesblob, valuesbytes); + + PMF_PARSE_CALL(rmw_i2c, cmd, h, maskbytes, valuesbytes, totalbytes, + maskblob, valuesblob); +} + +static int pmf_parser_read_cfg(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u32 bytes = pmf_next32(cmd); + + LOG_PARSE("pmf: read_cfg(offset: %x, bytes: %ud)\n", offset, bytes); + + PMF_PARSE_CALL(read_cfg, cmd, h, offset, bytes); +} + + +static int pmf_parser_write_cfg(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u32 bytes = pmf_next32(cmd); + const void *blob = pmf_next_blob(cmd, bytes); + + LOG_PARSE("pmf: write_cfg(offset: %x, bytes: %ud)\n", offset, bytes); + LOG_BLOB("pmf: data: \n", blob, bytes); + + PMF_PARSE_CALL(write_cfg, cmd, h, offset, bytes, blob); +} + +static int pmf_parser_rmw_cfg(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u32 maskbytes = pmf_next32(cmd); + u32 valuesbytes = pmf_next32(cmd); + u32 totalbytes = pmf_next32(cmd); + const void *maskblob = pmf_next_blob(cmd, maskbytes); + const void *valuesblob = pmf_next_blob(cmd, valuesbytes); + + LOG_PARSE("pmf: rmw_cfg(maskbytes: %ud, valuebytes: %ud," + " totalbytes: %d) ...\n", + maskbytes, valuesbytes, totalbytes); + LOG_BLOB("pmf: mask data: \n", maskblob, maskbytes); + LOG_BLOB("pmf: values data: \n", valuesblob, valuesbytes); + + PMF_PARSE_CALL(rmw_cfg, cmd, h, offset, maskbytes, valuesbytes, + totalbytes, maskblob, valuesblob); +} + + +static int pmf_parser_read_i2c_sub(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u8 subaddr = (u8)pmf_next32(cmd); + u32 bytes = pmf_next32(cmd); + + LOG_PARSE("pmf: read_i2c_sub(subaddr: %x, bytes: %ud)\n", + subaddr, bytes); + + PMF_PARSE_CALL(read_i2c_sub, cmd, h, subaddr, bytes); +} + +static int pmf_parser_write_i2c_sub(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u8 subaddr = (u8)pmf_next32(cmd); + u32 bytes = pmf_next32(cmd); + const void *blob = pmf_next_blob(cmd, bytes); + + LOG_PARSE("pmf: write_i2c_sub(subaddr: %x, bytes: %ud) ...\n", + subaddr, bytes); + LOG_BLOB("pmf: data: \n", blob, bytes); + + PMF_PARSE_CALL(write_i2c_sub, cmd, h, subaddr, bytes, blob); +} + +static int pmf_parser_set_i2c_mode(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u32 mode = pmf_next32(cmd); + + LOG_PARSE("pmf: set_i2c_mode(mode: %d)\n", mode); + + PMF_PARSE_CALL(set_i2c_mode, cmd, h, mode); +} + + +static int pmf_parser_rmw_i2c_sub(struct pmf_cmd *cmd, struct pmf_handlers *h) +{ + u8 subaddr = (u8)pmf_next32(cmd); + u32 maskbytes = pmf_next32(cmd); + u32 valuesbytes = pmf_next32(cmd); + u32 totalbytes = pmf_next32(cmd); + const void *maskblob = pmf_next_blob(cmd, maskbytes); + const void *valuesblob = pmf_next_blob(cmd, valuesbytes); + + LOG_PARSE("pmf: rmw_i2c_sub(subaddr: %x, maskbytes: %ud, valuebytes: %ud" + ", totalbytes: %d) ...\n", + subaddr, maskbytes, valuesbytes, totalbytes); + LOG_BLOB("pmf: mask data: \n", maskblob, maskbytes); + LOG_BLOB("pmf: values data: \n", valuesblob, valuesbytes); + + PMF_PARSE_CALL(rmw_i2c_sub, cmd, h, subaddr, maskbytes, valuesbytes, + totalbytes, maskblob, valuesblob); +} + +static int pmf_parser_read_reg32_msrx(struct pmf_cmd *cmd, + struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u32 mask = pmf_next32(cmd); + u32 shift = pmf_next32(cmd); + u32 xor = pmf_next32(cmd); + + LOG_PARSE("pmf: read_reg32_msrx(offset: %x, mask: %x, shift: %x," + " xor: %x\n", offset, mask, shift, xor); + + PMF_PARSE_CALL(read_reg32_msrx, cmd, h, offset, mask, shift, xor); +} + +static int pmf_parser_read_reg16_msrx(struct pmf_cmd *cmd, + struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u32 mask = pmf_next32(cmd); + u32 shift = pmf_next32(cmd); + u32 xor = pmf_next32(cmd); + + LOG_PARSE("pmf: read_reg16_msrx(offset: %x, mask: %x, shift: %x," + " xor: %x\n", offset, mask, shift, xor); + + PMF_PARSE_CALL(read_reg16_msrx, cmd, h, offset, mask, shift, xor); +} +static int pmf_parser_read_reg8_msrx(struct pmf_cmd *cmd, + struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u32 mask = pmf_next32(cmd); + u32 shift = pmf_next32(cmd); + u32 xor = pmf_next32(cmd); + + LOG_PARSE("pmf: read_reg8_msrx(offset: %x, mask: %x, shift: %x," + " xor: %x\n", offset, mask, shift, xor); + + PMF_PARSE_CALL(read_reg8_msrx, cmd, h, offset, mask, shift, xor); +} + +static int pmf_parser_write_reg32_slm(struct pmf_cmd *cmd, + struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u32 shift = pmf_next32(cmd); + u32 mask = pmf_next32(cmd); + + LOG_PARSE("pmf: write_reg32_slm(offset: %x, shift: %x, mask: %x\n", + offset, shift, mask); + + PMF_PARSE_CALL(write_reg32_slm, cmd, h, offset, shift, mask); +} + +static int pmf_parser_write_reg16_slm(struct pmf_cmd *cmd, + struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u32 shift = pmf_next32(cmd); + u32 mask = pmf_next32(cmd); + + LOG_PARSE("pmf: write_reg16_slm(offset: %x, shift: %x, mask: %x\n", + offset, shift, mask); + + PMF_PARSE_CALL(write_reg16_slm, cmd, h, offset, shift, mask); +} + +static int pmf_parser_write_reg8_slm(struct pmf_cmd *cmd, + struct pmf_handlers *h) +{ + u32 offset = pmf_next32(cmd); + u32 shift = pmf_next32(cmd); + u32 mask = pmf_next32(cmd); + + LOG_PARSE("pmf: write_reg8_slm(offset: %x, shift: %x, mask: %x\n", + offset, shift, mask); + + PMF_PARSE_CALL(write_reg8_slm, cmd, h, offset, shift, mask); +} + +static int pmf_parser_mask_and_compare(struct pmf_cmd *cmd, + struct pmf_handlers *h) +{ + u32 bytes = pmf_next32(cmd); + const void *maskblob = pmf_next_blob(cmd, bytes); + const void *valuesblob = pmf_next_blob(cmd, bytes); + + LOG_PARSE("pmf: mask_and_compare(length: %ud ...\n", bytes); + LOG_BLOB("pmf: mask data: \n", maskblob, bytes); + LOG_BLOB("pmf: values data: \n", valuesblob, bytes); + + PMF_PARSE_CALL(mask_and_compare, cmd, h, + bytes, maskblob, valuesblob); +} + + +typedef int (*pmf_cmd_parser_t)(struct pmf_cmd *cmd, struct pmf_handlers *h); + +static pmf_cmd_parser_t pmf_parsers[PMF_CMD_COUNT] = +{ + NULL, + pmf_parser_write_gpio, + pmf_parser_read_gpio, + pmf_parser_write_reg32, + pmf_parser_read_reg32, + pmf_parser_write_reg16, + pmf_parser_read_reg16, + pmf_parser_write_reg8, + pmf_parser_read_reg8, + pmf_parser_delay, + pmf_parser_wait_reg32, + pmf_parser_wait_reg16, + pmf_parser_wait_reg8, + pmf_parser_read_i2c, + pmf_parser_write_i2c, + pmf_parser_rmw_i2c, + NULL, /* Bogus command */ + NULL, /* Shift bytes right: NYI */ + NULL, /* Shift bytes left: NYI */ + pmf_parser_read_cfg, + pmf_parser_write_cfg, + pmf_parser_rmw_cfg, + pmf_parser_read_i2c_sub, + pmf_parser_write_i2c_sub, + pmf_parser_set_i2c_mode, + pmf_parser_rmw_i2c_sub, + pmf_parser_read_reg32_msrx, + pmf_parser_read_reg16_msrx, + pmf_parser_read_reg8_msrx, + pmf_parser_write_reg32_slm, + pmf_parser_write_reg16_slm, + pmf_parser_write_reg8_slm, + pmf_parser_mask_and_compare, +}; + +struct pmf_device { + struct list_head link; + struct device_node *node; + struct pmf_handlers *handlers; + struct list_head functions; + struct kref ref; +}; + +static LIST_HEAD(pmf_devices); +static DEFINE_SPINLOCK(pmf_lock); +static DEFINE_MUTEX(pmf_irq_mutex); + +static void pmf_release_device(struct kref *kref) +{ + struct pmf_device *dev = container_of(kref, struct pmf_device, ref); + kfree(dev); +} + +static inline void pmf_put_device(struct pmf_device *dev) +{ + kref_put(&dev->ref, pmf_release_device); +} + +static inline struct pmf_device *pmf_get_device(struct pmf_device *dev) +{ + kref_get(&dev->ref); + return dev; +} + +static inline struct pmf_device *pmf_find_device(struct device_node *np) +{ + struct pmf_device *dev; + + list_for_each_entry(dev, &pmf_devices, link) { + if (dev->node == np) + return pmf_get_device(dev); + } + return NULL; +} + +static int pmf_parse_one(struct pmf_function *func, + struct pmf_handlers *handlers, + void *instdata, struct pmf_args *args) +{ + struct pmf_cmd cmd; + u32 ccode; + int count, rc; + + cmd.cmdptr = func->data; + cmd.cmdend = func->data + func->length; + cmd.func = func; + cmd.instdata = instdata; + cmd.args = args; + cmd.error = 0; + + LOG_PARSE("pmf: func %s, %d bytes, %s...\n", + func->name, func->length, + handlers ? "executing" : "parsing"); + + /* One subcommand to parse for now */ + count = 1; + + while(count-- && cmd.cmdptr < cmd.cmdend) { + /* Get opcode */ + ccode = pmf_next32(&cmd); + /* Check if we are hitting a command list, fetch new count */ + if (ccode == 0) { + count = pmf_next32(&cmd) - 1; + ccode = pmf_next32(&cmd); + } + if (cmd.error) { + LOG_ERROR("pmf: parse error, not enough data\n"); + return -ENXIO; + } + if (ccode >= PMF_CMD_COUNT) { + LOG_ERROR("pmf: command code %d unknown !\n", ccode); + return -ENXIO; + } + if (pmf_parsers[ccode] == NULL) { + LOG_ERROR("pmf: no parser for command %d !\n", ccode); + return -ENXIO; + } + rc = pmf_parsers[ccode](&cmd, handlers); + if (rc != 0) { + LOG_ERROR("pmf: parser for command %d returned" + " error %d\n", ccode, rc); + return rc; + } + } + + /* We are doing an initial parse pass, we need to adjust the size */ + if (handlers == NULL) + func->length = cmd.cmdptr - func->data; + + return 0; +} + +static int pmf_add_function_prop(struct pmf_device *dev, void *driverdata, + const char *name, u32 *data, + unsigned int length) +{ + int count = 0; + struct pmf_function *func = NULL; + + DBG("pmf: Adding functions for platform-do-%s\n", name); + + while (length >= 12) { + /* Allocate a structure */ + func = kzalloc(sizeof(*func), GFP_KERNEL); + if (func == NULL) + goto bail; + kref_init(&func->ref); + INIT_LIST_HEAD(&func->irq_clients); + func->node = dev->node; + func->driver_data = driverdata; + func->name = name; + func->phandle = data[0]; + func->flags = data[1]; + data += 2; + length -= 8; + func->data = data; + func->length = length; + func->dev = dev; + DBG("pmf: idx %d: flags=%08x, phandle=%08x " + " %d bytes remaining, parsing...\n", + count+1, func->flags, func->phandle, length); + if (pmf_parse_one(func, NULL, NULL, NULL)) { + kfree(func); + goto bail; + } + length -= func->length; + data = (u32 *)(((u8 *)data) + func->length); + list_add(&func->link, &dev->functions); + pmf_get_device(dev); + count++; + } + bail: + DBG("pmf: Added %d functions\n", count); + + return count; +} + +static int pmf_add_functions(struct pmf_device *dev, void *driverdata) +{ + struct property *pp; +#define PP_PREFIX "platform-do-" + const int plen = strlen(PP_PREFIX); + int count = 0; + + for (pp = dev->node->properties; pp != 0; pp = pp->next) { + const char *name; + if (strncmp(pp->name, PP_PREFIX, plen) != 0) + continue; + name = pp->name + plen; + if (strlen(name) && pp->length >= 12) + count += pmf_add_function_prop(dev, driverdata, name, + pp->value, pp->length); + } + return count; +} + + +int pmf_register_driver(struct device_node *np, + struct pmf_handlers *handlers, + void *driverdata) +{ + struct pmf_device *dev; + unsigned long flags; + int rc = 0; + + if (handlers == NULL) + return -EINVAL; + + DBG("pmf: registering driver for node %pOF\n", np); + + spin_lock_irqsave(&pmf_lock, flags); + dev = pmf_find_device(np); + spin_unlock_irqrestore(&pmf_lock, flags); + if (dev != NULL) { + DBG("pmf: already there !\n"); + pmf_put_device(dev); + return -EBUSY; + } + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (dev == NULL) { + DBG("pmf: no memory !\n"); + return -ENOMEM; + } + kref_init(&dev->ref); + dev->node = of_node_get(np); + dev->handlers = handlers; + INIT_LIST_HEAD(&dev->functions); + + rc = pmf_add_functions(dev, driverdata); + if (rc == 0) { + DBG("pmf: no functions, disposing.. \n"); + of_node_put(np); + kfree(dev); + return -ENODEV; + } + + spin_lock_irqsave(&pmf_lock, flags); + list_add(&dev->link, &pmf_devices); + spin_unlock_irqrestore(&pmf_lock, flags); + + return 0; +} +EXPORT_SYMBOL_GPL(pmf_register_driver); + +struct pmf_function *pmf_get_function(struct pmf_function *func) +{ + if (!try_module_get(func->dev->handlers->owner)) + return NULL; + kref_get(&func->ref); + return func; +} +EXPORT_SYMBOL_GPL(pmf_get_function); + +static void pmf_release_function(struct kref *kref) +{ + struct pmf_function *func = + container_of(kref, struct pmf_function, ref); + pmf_put_device(func->dev); + kfree(func); +} + +static inline void __pmf_put_function(struct pmf_function *func) +{ + kref_put(&func->ref, pmf_release_function); +} + +void pmf_put_function(struct pmf_function *func) +{ + if (func == NULL) + return; + module_put(func->dev->handlers->owner); + __pmf_put_function(func); +} +EXPORT_SYMBOL_GPL(pmf_put_function); + +void pmf_unregister_driver(struct device_node *np) +{ + struct pmf_device *dev; + unsigned long flags; + + DBG("pmf: unregistering driver for node %pOF\n", np); + + spin_lock_irqsave(&pmf_lock, flags); + dev = pmf_find_device(np); + if (dev == NULL) { + DBG("pmf: not such driver !\n"); + spin_unlock_irqrestore(&pmf_lock, flags); + return; + } + list_del(&dev->link); + + while(!list_empty(&dev->functions)) { + struct pmf_function *func = + list_entry(dev->functions.next, typeof(*func), link); + list_del(&func->link); + __pmf_put_function(func); + } + + pmf_put_device(dev); + spin_unlock_irqrestore(&pmf_lock, flags); +} +EXPORT_SYMBOL_GPL(pmf_unregister_driver); + +static struct pmf_function *__pmf_find_function(struct device_node *target, + const char *name, u32 flags) +{ + struct device_node *actor = of_node_get(target); + struct pmf_device *dev; + struct pmf_function *func, *result = NULL; + char fname[64]; + const u32 *prop; + u32 ph; + + /* + * Look for a "platform-*" function reference. If we can't find + * one, then we fallback to a direct call attempt + */ + snprintf(fname, 63, "platform-%s", name); + prop = of_get_property(target, fname, NULL); + if (prop == NULL) + goto find_it; + ph = *prop; + if (ph == 0) + goto find_it; + + /* + * Ok, now try to find the actor. If we can't find it, we fail, + * there is no point in falling back there + */ + of_node_put(actor); + actor = of_find_node_by_phandle(ph); + if (actor == NULL) + return NULL; + find_it: + dev = pmf_find_device(actor); + if (dev == NULL) { + result = NULL; + goto out; + } + + list_for_each_entry(func, &dev->functions, link) { + if (name && strcmp(name, func->name)) + continue; + if (func->phandle && target->phandle != func->phandle) + continue; + if ((func->flags & flags) == 0) + continue; + result = func; + break; + } + pmf_put_device(dev); +out: + of_node_put(actor); + return result; +} + + +int pmf_register_irq_client(struct device_node *target, + const char *name, + struct pmf_irq_client *client) +{ + struct pmf_function *func; + unsigned long flags; + + spin_lock_irqsave(&pmf_lock, flags); + func = __pmf_find_function(target, name, PMF_FLAGS_INT_GEN); + if (func) + func = pmf_get_function(func); + spin_unlock_irqrestore(&pmf_lock, flags); + if (func == NULL) + return -ENODEV; + + /* guard against manipulations of list */ + mutex_lock(&pmf_irq_mutex); + if (list_empty(&func->irq_clients)) + func->dev->handlers->irq_enable(func); + + /* guard against pmf_do_irq while changing list */ + spin_lock_irqsave(&pmf_lock, flags); + list_add(&client->link, &func->irq_clients); + spin_unlock_irqrestore(&pmf_lock, flags); + + client->func = func; + mutex_unlock(&pmf_irq_mutex); + + return 0; +} +EXPORT_SYMBOL_GPL(pmf_register_irq_client); + +void pmf_unregister_irq_client(struct pmf_irq_client *client) +{ + struct pmf_function *func = client->func; + unsigned long flags; + + BUG_ON(func == NULL); + + /* guard against manipulations of list */ + mutex_lock(&pmf_irq_mutex); + client->func = NULL; + + /* guard against pmf_do_irq while changing list */ + spin_lock_irqsave(&pmf_lock, flags); + list_del(&client->link); + spin_unlock_irqrestore(&pmf_lock, flags); + + if (list_empty(&func->irq_clients)) + func->dev->handlers->irq_disable(func); + mutex_unlock(&pmf_irq_mutex); + pmf_put_function(func); +} +EXPORT_SYMBOL_GPL(pmf_unregister_irq_client); + + +void pmf_do_irq(struct pmf_function *func) +{ + unsigned long flags; + struct pmf_irq_client *client; + + /* For now, using a spinlock over the whole function. Can be made + * to drop the lock using 2 lists if necessary + */ + spin_lock_irqsave(&pmf_lock, flags); + list_for_each_entry(client, &func->irq_clients, link) { + if (!try_module_get(client->owner)) + continue; + client->handler(client->data); + module_put(client->owner); + } + spin_unlock_irqrestore(&pmf_lock, flags); +} +EXPORT_SYMBOL_GPL(pmf_do_irq); + + +int pmf_call_one(struct pmf_function *func, struct pmf_args *args) +{ + struct pmf_device *dev = func->dev; + void *instdata = NULL; + int rc = 0; + + DBG(" ** pmf_call_one(%pOF/%s) **\n", dev->node, func->name); + + if (dev->handlers->begin) + instdata = dev->handlers->begin(func, args); + rc = pmf_parse_one(func, dev->handlers, instdata, args); + if (dev->handlers->end) + dev->handlers->end(func, instdata); + + return rc; +} +EXPORT_SYMBOL_GPL(pmf_call_one); + +int pmf_do_functions(struct device_node *np, const char *name, + u32 phandle, u32 fflags, struct pmf_args *args) +{ + struct pmf_device *dev; + struct pmf_function *func, *tmp; + unsigned long flags; + int rc = -ENODEV; + + spin_lock_irqsave(&pmf_lock, flags); + + dev = pmf_find_device(np); + if (dev == NULL) { + spin_unlock_irqrestore(&pmf_lock, flags); + return -ENODEV; + } + list_for_each_entry_safe(func, tmp, &dev->functions, link) { + if (name && strcmp(name, func->name)) + continue; + if (phandle && func->phandle && phandle != func->phandle) + continue; + if ((func->flags & fflags) == 0) + continue; + if (pmf_get_function(func) == NULL) + continue; + spin_unlock_irqrestore(&pmf_lock, flags); + rc = pmf_call_one(func, args); + pmf_put_function(func); + spin_lock_irqsave(&pmf_lock, flags); + } + pmf_put_device(dev); + spin_unlock_irqrestore(&pmf_lock, flags); + + return rc; +} +EXPORT_SYMBOL_GPL(pmf_do_functions); + + +struct pmf_function *pmf_find_function(struct device_node *target, + const char *name) +{ + struct pmf_function *func; + unsigned long flags; + + spin_lock_irqsave(&pmf_lock, flags); + func = __pmf_find_function(target, name, PMF_FLAGS_ON_DEMAND); + if (func) + func = pmf_get_function(func); + spin_unlock_irqrestore(&pmf_lock, flags); + return func; +} +EXPORT_SYMBOL_GPL(pmf_find_function); + +int pmf_call_function(struct device_node *target, const char *name, + struct pmf_args *args) +{ + struct pmf_function *func = pmf_find_function(target, name); + int rc; + + if (func == NULL) + return -ENODEV; + + rc = pmf_call_one(func, args); + pmf_put_function(func); + return rc; +} +EXPORT_SYMBOL_GPL(pmf_call_function); + diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c new file mode 100644 index 000000000..4921bccf0 --- /dev/null +++ b/arch/powerpc/platforms/powermac/pic.c @@ -0,0 +1,651 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Support for the interrupt controllers found on Power Macintosh, + * currently Apple's "Grand Central" interrupt controller in all + * it's incarnations. OpenPIC support used on newer machines is + * in a separate file + * + * Copyright (C) 1997 Paul Mackerras (paulus@samba.org) + * Copyright (C) 2005 Benjamin Herrenschmidt (benh@kernel.crashing.org) + * IBM, Corp. + */ + +#include <linux/stddef.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/signal.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/syscore_ops.h> +#include <linux/adb.h> +#include <linux/pmu.h> + +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/smp.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#include <asm/time.h> +#include <asm/pmac_feature.h> +#include <asm/mpic.h> +#include <asm/xmon.h> + +#include "pmac.h" + +#ifdef CONFIG_PPC32 +struct pmac_irq_hw { + unsigned int event; + unsigned int enable; + unsigned int ack; + unsigned int level; +}; + +/* Workaround flags for 32bit powermac machines */ +unsigned int of_irq_workarounds; +struct device_node *of_irq_dflt_pic; + +/* Default addresses */ +static volatile struct pmac_irq_hw __iomem *pmac_irq_hw[4]; + +static int max_irqs; +static int max_real_irqs; + +static DEFINE_RAW_SPINLOCK(pmac_pic_lock); + +/* The max irq number this driver deals with is 128; see max_irqs */ +static DECLARE_BITMAP(ppc_lost_interrupts, 128); +static DECLARE_BITMAP(ppc_cached_irq_mask, 128); +static int pmac_irq_cascade = -1; +static struct irq_domain *pmac_pic_host; + +static void __pmac_retrigger(unsigned int irq_nr) +{ + if (irq_nr >= max_real_irqs && pmac_irq_cascade > 0) { + __set_bit(irq_nr, ppc_lost_interrupts); + irq_nr = pmac_irq_cascade; + mb(); + } + if (!__test_and_set_bit(irq_nr, ppc_lost_interrupts)) { + atomic_inc(&ppc_n_lost_interrupts); + set_dec(1); + } +} + +static void pmac_mask_and_ack_irq(struct irq_data *d) +{ + unsigned int src = irqd_to_hwirq(d); + unsigned long bit = 1UL << (src & 0x1f); + int i = src >> 5; + unsigned long flags; + + raw_spin_lock_irqsave(&pmac_pic_lock, flags); + __clear_bit(src, ppc_cached_irq_mask); + if (__test_and_clear_bit(src, ppc_lost_interrupts)) + atomic_dec(&ppc_n_lost_interrupts); + out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]); + out_le32(&pmac_irq_hw[i]->ack, bit); + do { + /* make sure ack gets to controller before we enable + interrupts */ + mb(); + } while((in_le32(&pmac_irq_hw[i]->enable) & bit) + != (ppc_cached_irq_mask[i] & bit)); + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); +} + +static void pmac_ack_irq(struct irq_data *d) +{ + unsigned int src = irqd_to_hwirq(d); + unsigned long bit = 1UL << (src & 0x1f); + int i = src >> 5; + unsigned long flags; + + raw_spin_lock_irqsave(&pmac_pic_lock, flags); + if (__test_and_clear_bit(src, ppc_lost_interrupts)) + atomic_dec(&ppc_n_lost_interrupts); + out_le32(&pmac_irq_hw[i]->ack, bit); + (void)in_le32(&pmac_irq_hw[i]->ack); + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); +} + +static void __pmac_set_irq_mask(unsigned int irq_nr, int nokicklost) +{ + unsigned long bit = 1UL << (irq_nr & 0x1f); + int i = irq_nr >> 5; + + if ((unsigned)irq_nr >= max_irqs) + return; + + /* enable unmasked interrupts */ + out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]); + + do { + /* make sure mask gets to controller before we + return to user */ + mb(); + } while((in_le32(&pmac_irq_hw[i]->enable) & bit) + != (ppc_cached_irq_mask[i] & bit)); + + /* + * Unfortunately, setting the bit in the enable register + * when the device interrupt is already on *doesn't* set + * the bit in the flag register or request another interrupt. + */ + if (bit & ppc_cached_irq_mask[i] & in_le32(&pmac_irq_hw[i]->level)) + __pmac_retrigger(irq_nr); +} + +/* When an irq gets requested for the first client, if it's an + * edge interrupt, we clear any previous one on the controller + */ +static unsigned int pmac_startup_irq(struct irq_data *d) +{ + unsigned long flags; + unsigned int src = irqd_to_hwirq(d); + unsigned long bit = 1UL << (src & 0x1f); + int i = src >> 5; + + raw_spin_lock_irqsave(&pmac_pic_lock, flags); + if (!irqd_is_level_type(d)) + out_le32(&pmac_irq_hw[i]->ack, bit); + __set_bit(src, ppc_cached_irq_mask); + __pmac_set_irq_mask(src, 0); + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); + + return 0; +} + +static void pmac_mask_irq(struct irq_data *d) +{ + unsigned long flags; + unsigned int src = irqd_to_hwirq(d); + + raw_spin_lock_irqsave(&pmac_pic_lock, flags); + __clear_bit(src, ppc_cached_irq_mask); + __pmac_set_irq_mask(src, 1); + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); +} + +static void pmac_unmask_irq(struct irq_data *d) +{ + unsigned long flags; + unsigned int src = irqd_to_hwirq(d); + + raw_spin_lock_irqsave(&pmac_pic_lock, flags); + __set_bit(src, ppc_cached_irq_mask); + __pmac_set_irq_mask(src, 0); + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); +} + +static int pmac_retrigger(struct irq_data *d) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&pmac_pic_lock, flags); + __pmac_retrigger(irqd_to_hwirq(d)); + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); + return 1; +} + +static struct irq_chip pmac_pic = { + .name = "PMAC-PIC", + .irq_startup = pmac_startup_irq, + .irq_mask = pmac_mask_irq, + .irq_ack = pmac_ack_irq, + .irq_mask_ack = pmac_mask_and_ack_irq, + .irq_unmask = pmac_unmask_irq, + .irq_retrigger = pmac_retrigger, +}; + +static irqreturn_t gatwick_action(int cpl, void *dev_id) +{ + unsigned long flags; + int irq, bits; + int rc = IRQ_NONE; + + raw_spin_lock_irqsave(&pmac_pic_lock, flags); + for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) { + int i = irq >> 5; + bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i]; + bits |= in_le32(&pmac_irq_hw[i]->level); + bits &= ppc_cached_irq_mask[i]; + if (bits == 0) + continue; + irq += __ilog2(bits); + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); + generic_handle_irq(irq); + raw_spin_lock_irqsave(&pmac_pic_lock, flags); + rc = IRQ_HANDLED; + } + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); + return rc; +} + +static unsigned int pmac_pic_get_irq(void) +{ + int irq; + unsigned long bits = 0; + unsigned long flags; + +#ifdef CONFIG_PPC_PMAC32_PSURGE + /* IPI's are a hack on the powersurge -- Cort */ + if (smp_processor_id() != 0) { + return psurge_secondary_virq; + } +#endif /* CONFIG_PPC_PMAC32_PSURGE */ + raw_spin_lock_irqsave(&pmac_pic_lock, flags); + for (irq = max_real_irqs; (irq -= 32) >= 0; ) { + int i = irq >> 5; + bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i]; + bits |= in_le32(&pmac_irq_hw[i]->level); + bits &= ppc_cached_irq_mask[i]; + if (bits == 0) + continue; + irq += __ilog2(bits); + break; + } + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); + if (unlikely(irq < 0)) + return 0; + return irq_linear_revmap(pmac_pic_host, irq); +} + +static int pmac_pic_host_match(struct irq_domain *h, struct device_node *node, + enum irq_domain_bus_token bus_token) +{ + /* We match all, we don't always have a node anyway */ + return 1; +} + +static int pmac_pic_host_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + if (hw >= max_irqs) + return -EINVAL; + + /* Mark level interrupts, set delayed disable for edge ones and set + * handlers + */ + irq_set_status_flags(virq, IRQ_LEVEL); + irq_set_chip_and_handler(virq, &pmac_pic, handle_level_irq); + return 0; +} + +static const struct irq_domain_ops pmac_pic_host_ops = { + .match = pmac_pic_host_match, + .map = pmac_pic_host_map, + .xlate = irq_domain_xlate_onecell, +}; + +static void __init pmac_pic_probe_oldstyle(void) +{ + int i; + struct device_node *master = NULL; + struct device_node *slave = NULL; + u8 __iomem *addr; + struct resource r; + + /* Set our get_irq function */ + ppc_md.get_irq = pmac_pic_get_irq; + + /* + * Find the interrupt controller type & node + */ + + if ((master = of_find_node_by_name(NULL, "gc")) != NULL) { + max_irqs = max_real_irqs = 32; + } else if ((master = of_find_node_by_name(NULL, "ohare")) != NULL) { + max_irqs = max_real_irqs = 32; + /* We might have a second cascaded ohare */ + slave = of_find_node_by_name(NULL, "pci106b,7"); + if (slave) + max_irqs = 64; + } else if ((master = of_find_node_by_name(NULL, "mac-io")) != NULL) { + max_irqs = max_real_irqs = 64; + + /* We might have a second cascaded heathrow */ + + /* Compensate for of_node_put() in of_find_node_by_name() */ + of_node_get(master); + slave = of_find_node_by_name(master, "mac-io"); + + /* Check ordering of master & slave */ + if (of_device_is_compatible(master, "gatwick")) { + struct device_node *tmp; + BUG_ON(slave == NULL); + tmp = master; + master = slave; + slave = tmp; + } + + /* We found a slave */ + if (slave) + max_irqs = 128; + } + BUG_ON(master == NULL); + + /* + * Allocate an irq host + */ + pmac_pic_host = irq_domain_add_linear(master, max_irqs, + &pmac_pic_host_ops, NULL); + BUG_ON(pmac_pic_host == NULL); + irq_set_default_host(pmac_pic_host); + + /* Get addresses of first controller if we have a node for it */ + BUG_ON(of_address_to_resource(master, 0, &r)); + + /* Map interrupts of primary controller */ + addr = (u8 __iomem *) ioremap(r.start, 0x40); + i = 0; + pmac_irq_hw[i++] = (volatile struct pmac_irq_hw __iomem *) + (addr + 0x20); + if (max_real_irqs > 32) + pmac_irq_hw[i++] = (volatile struct pmac_irq_hw __iomem *) + (addr + 0x10); + of_node_put(master); + + printk(KERN_INFO "irq: Found primary Apple PIC %pOF for %d irqs\n", + master, max_real_irqs); + + /* Map interrupts of cascaded controller */ + if (slave && !of_address_to_resource(slave, 0, &r)) { + addr = (u8 __iomem *)ioremap(r.start, 0x40); + pmac_irq_hw[i++] = (volatile struct pmac_irq_hw __iomem *) + (addr + 0x20); + if (max_irqs > 64) + pmac_irq_hw[i++] = + (volatile struct pmac_irq_hw __iomem *) + (addr + 0x10); + pmac_irq_cascade = irq_of_parse_and_map(slave, 0); + + printk(KERN_INFO "irq: Found slave Apple PIC %pOF for %d irqs" + " cascade: %d\n", slave, + max_irqs - max_real_irqs, pmac_irq_cascade); + } + of_node_put(slave); + + /* Disable all interrupts in all controllers */ + for (i = 0; i * 32 < max_irqs; ++i) + out_le32(&pmac_irq_hw[i]->enable, 0); + + /* Hookup cascade irq */ + if (slave && pmac_irq_cascade) { + if (request_irq(pmac_irq_cascade, gatwick_action, + IRQF_NO_THREAD, "cascade", NULL)) + pr_err("Failed to register cascade interrupt\n"); + } + + printk(KERN_INFO "irq: System has %d possible interrupts\n", max_irqs); +#ifdef CONFIG_XMON + i = irq_create_mapping(NULL, 20); + if (request_irq(i, xmon_irq, IRQF_NO_THREAD, "NMI - XMON", NULL)) + pr_err("Failed to register NMI-XMON interrupt\n"); +#endif +} + +int of_irq_parse_oldworld(struct device_node *device, int index, + struct of_phandle_args *out_irq) +{ + const u32 *ints = NULL; + int intlen; + + /* + * Old machines just have a list of interrupt numbers + * and no interrupt-controller nodes. We also have dodgy + * cases where the APPL,interrupts property is completely + * missing behind pci-pci bridges and we have to get it + * from the parent (the bridge itself, as apple just wired + * everything together on these) + */ + while (device) { + ints = of_get_property(device, "AAPL,interrupts", &intlen); + if (ints != NULL) + break; + device = device->parent; + if (!of_node_is_type(device, "pci")) + break; + } + if (ints == NULL) + return -EINVAL; + intlen /= sizeof(u32); + + if (index >= intlen) + return -EINVAL; + + out_irq->np = NULL; + out_irq->args[0] = ints[index]; + out_irq->args_count = 1; + + return 0; +} +#endif /* CONFIG_PPC32 */ + +static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic) +{ +#if defined(CONFIG_XMON) && defined(CONFIG_PPC32) + struct device_node* pswitch; + int nmi_irq; + + pswitch = of_find_node_by_name(NULL, "programmer-switch"); + if (pswitch) { + nmi_irq = irq_of_parse_and_map(pswitch, 0); + if (nmi_irq) { + mpic_irq_set_priority(nmi_irq, 9); + if (request_irq(nmi_irq, xmon_irq, IRQF_NO_THREAD, + "NMI - XMON", NULL)) + pr_err("Failed to register NMI-XMON interrupt\n"); + } + of_node_put(pswitch); + } +#endif /* defined(CONFIG_XMON) && defined(CONFIG_PPC32) */ +} + +static struct mpic * __init pmac_setup_one_mpic(struct device_node *np, + int master) +{ + const char *name = master ? " MPIC 1 " : " MPIC 2 "; + struct mpic *mpic; + unsigned int flags = master ? 0 : MPIC_SECONDARY; + + pmac_call_feature(PMAC_FTR_ENABLE_MPIC, np, 0, 0); + + if (of_get_property(np, "big-endian", NULL)) + flags |= MPIC_BIG_ENDIAN; + + /* Primary Big Endian means HT interrupts. This is quite dodgy + * but works until I find a better way + */ + if (master && (flags & MPIC_BIG_ENDIAN)) + flags |= MPIC_U3_HT_IRQS; + + mpic = mpic_alloc(np, 0, flags, 0, 0, name); + if (mpic == NULL) + return NULL; + + mpic_init(mpic); + + return mpic; + } + +static int __init pmac_pic_probe_mpic(void) +{ + struct mpic *mpic1, *mpic2; + struct device_node *np, *master = NULL, *slave = NULL; + + /* We can have up to 2 MPICs cascaded */ + for_each_node_by_type(np, "open-pic") { + if (master == NULL && + of_get_property(np, "interrupts", NULL) == NULL) + master = of_node_get(np); + else if (slave == NULL) + slave = of_node_get(np); + if (master && slave) { + of_node_put(np); + break; + } + } + + /* Check for bogus setups */ + if (master == NULL && slave != NULL) { + master = slave; + slave = NULL; + } + + /* Not found, default to good old pmac pic */ + if (master == NULL) + return -ENODEV; + + /* Set master handler */ + ppc_md.get_irq = mpic_get_irq; + + /* Setup master */ + mpic1 = pmac_setup_one_mpic(master, 1); + BUG_ON(mpic1 == NULL); + + /* Install NMI if any */ + pmac_pic_setup_mpic_nmi(mpic1); + + of_node_put(master); + + /* Set up a cascaded controller, if present */ + if (slave) { + mpic2 = pmac_setup_one_mpic(slave, 0); + if (mpic2 == NULL) + printk(KERN_ERR "Failed to setup slave MPIC\n"); + of_node_put(slave); + } + + return 0; +} + + +void __init pmac_pic_init(void) +{ + /* We configure the OF parsing based on our oldworld vs. newworld + * platform type and whether we were booted by BootX. + */ +#ifdef CONFIG_PPC32 + if (!pmac_newworld) + of_irq_workarounds |= OF_IMAP_OLDWORLD_MAC; + if (of_get_property(of_chosen, "linux,bootx", NULL) != NULL) + of_irq_workarounds |= OF_IMAP_NO_PHANDLE; + + /* If we don't have phandles on a newworld, then try to locate a + * default interrupt controller (happens when booting with BootX). + * We do a first match here, hopefully, that only ever happens on + * machines with one controller. + */ + if (pmac_newworld && (of_irq_workarounds & OF_IMAP_NO_PHANDLE)) { + struct device_node *np; + + for_each_node_with_property(np, "interrupt-controller") { + /* Skip /chosen/interrupt-controller */ + if (of_node_name_eq(np, "chosen")) + continue; + /* It seems like at least one person wants + * to use BootX on a machine with an AppleKiwi + * controller which happens to pretend to be an + * interrupt controller too. */ + if (of_node_name_eq(np, "AppleKiwi")) + continue; + /* I think we found one ! */ + of_irq_dflt_pic = np; + break; + } + } +#endif /* CONFIG_PPC32 */ + + /* We first try to detect Apple's new Core99 chipset, since mac-io + * is quite different on those machines and contains an IBM MPIC2. + */ + if (pmac_pic_probe_mpic() == 0) + return; + +#ifdef CONFIG_PPC32 + pmac_pic_probe_oldstyle(); +#endif +} + +#if defined(CONFIG_PM) && defined(CONFIG_PPC32) +/* + * These procedures are used in implementing sleep on the powerbooks. + * sleep_save_intrs() saves the states of all interrupt enables + * and disables all interrupts except for the nominated one. + * sleep_restore_intrs() restores the states of all interrupt enables. + */ +unsigned long sleep_save_mask[2]; + +/* This used to be passed by the PMU driver but that link got + * broken with the new driver model. We use this tweak for now... + * We really want to do things differently though... + */ +static int pmacpic_find_viaint(void) +{ + int viaint = -1; + +#ifdef CONFIG_ADB_PMU + struct device_node *np; + + if (pmu_get_model() != PMU_OHARE_BASED) + goto not_found; + np = of_find_node_by_name(NULL, "via-pmu"); + if (np == NULL) + goto not_found; + viaint = irq_of_parse_and_map(np, 0); + of_node_put(np); + +not_found: +#endif /* CONFIG_ADB_PMU */ + return viaint; +} + +static int pmacpic_suspend(void) +{ + int viaint = pmacpic_find_viaint(); + + sleep_save_mask[0] = ppc_cached_irq_mask[0]; + sleep_save_mask[1] = ppc_cached_irq_mask[1]; + ppc_cached_irq_mask[0] = 0; + ppc_cached_irq_mask[1] = 0; + if (viaint > 0) + set_bit(viaint, ppc_cached_irq_mask); + out_le32(&pmac_irq_hw[0]->enable, ppc_cached_irq_mask[0]); + if (max_real_irqs > 32) + out_le32(&pmac_irq_hw[1]->enable, ppc_cached_irq_mask[1]); + (void)in_le32(&pmac_irq_hw[0]->event); + /* make sure mask gets to controller before we return to caller */ + mb(); + (void)in_le32(&pmac_irq_hw[0]->enable); + + return 0; +} + +static void pmacpic_resume(void) +{ + int i; + + out_le32(&pmac_irq_hw[0]->enable, 0); + if (max_real_irqs > 32) + out_le32(&pmac_irq_hw[1]->enable, 0); + mb(); + for (i = 0; i < max_real_irqs; ++i) + if (test_bit(i, sleep_save_mask)) + pmac_unmask_irq(irq_get_irq_data(i)); +} + +static struct syscore_ops pmacpic_syscore_ops = { + .suspend = pmacpic_suspend, + .resume = pmacpic_resume, +}; + +static int __init init_pmacpic_syscore(void) +{ + if (pmac_irq_hw[0]) + register_syscore_ops(&pmacpic_syscore_ops); + return 0; +} + +machine_subsys_initcall(powermac, init_pmacpic_syscore); + +#endif /* CONFIG_PM && CONFIG_PPC32 */ diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h new file mode 100644 index 000000000..0d715db43 --- /dev/null +++ b/arch/powerpc/platforms/powermac/pmac.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __PMAC_H__ +#define __PMAC_H__ + +#include <linux/pci.h> +#include <linux/irq.h> + +/* + * Declaration for the various functions exported by the + * pmac_* files. Mostly for use by pmac_setup + */ + +struct rtc_time; + +extern int pmac_newworld; + +extern long pmac_time_init(void); +extern time64_t pmac_get_boot_time(void); +extern void pmac_get_rtc_time(struct rtc_time *); +extern int pmac_set_rtc_time(struct rtc_time *); +extern void pmac_read_rtc_time(void); +extern void pmac_calibrate_decr(void); +extern void pmac_pci_irq_fixup(struct pci_dev *); +extern void pmac_pci_init(void); + +extern void pmac_nvram_update(void); +extern unsigned char pmac_nvram_read_byte(int addr); +extern void pmac_nvram_write_byte(int addr, unsigned char val); +extern void pmac_pcibios_after_init(void); +extern int of_show_percpuinfo(struct seq_file *m, int i); + +extern void pmac_setup_pci_dma(void); +extern void pmac_check_ht_link(void); + +extern void pmac_setup_smp(void); +extern int psurge_secondary_virq; +extern void low_cpu_offline_self(void) __attribute__((noreturn)); + +extern int pmac_nvram_init(void); +extern void pmac_pic_init(void); + +extern struct pci_controller_ops pmac_pci_controller_ops; + +#endif /* __PMAC_H__ */ diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c new file mode 100644 index 000000000..2e2cc0c75 --- /dev/null +++ b/arch/powerpc/platforms/powermac/setup.c @@ -0,0 +1,624 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Powermac setup and early boot code plus other random bits. + * + * PowerPC version + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Adapted for Power Macintosh by Paul Mackerras + * Copyright (C) 1996 Paul Mackerras (paulus@samba.org) + * + * Derived from "arch/alpha/kernel/setup.c" + * Copyright (C) 1995 Linus Torvalds + * + * Maintained by Benjamin Herrenschmidt (benh@kernel.crashing.org) + */ + +/* + * bootup setup stuff.. + */ + +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/stddef.h> +#include <linux/unistd.h> +#include <linux/ptrace.h> +#include <linux/export.h> +#include <linux/user.h> +#include <linux/tty.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/major.h> +#include <linux/initrd.h> +#include <linux/vt_kern.h> +#include <linux/console.h> +#include <linux/pci.h> +#include <linux/adb.h> +#include <linux/cuda.h> +#include <linux/pmu.h> +#include <linux/irq.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/bitops.h> +#include <linux/suspend.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> + +#include <asm/reg.h> +#include <asm/sections.h> +#include <asm/prom.h> +#include <asm/io.h> +#include <asm/pci-bridge.h> +#include <asm/ohare.h> +#include <asm/mediabay.h> +#include <asm/machdep.h> +#include <asm/dma.h> +#include <asm/cputable.h> +#include <asm/btext.h> +#include <asm/pmac_feature.h> +#include <asm/time.h> +#include <asm/mmu_context.h> +#include <asm/iommu.h> +#include <asm/smu.h> +#include <asm/pmc.h> +#include <asm/udbg.h> + +#include "pmac.h" + +#undef SHOW_GATWICK_IRQS + +int ppc_override_l2cr = 0; +int ppc_override_l2cr_value; +int has_l2cache = 0; + +int pmac_newworld; + +static int current_root_goodness = -1; + +extern struct machdep_calls pmac_md; + +#define DEFAULT_ROOT_DEVICE Root_SDA1 /* sda1 - slightly silly choice */ + +#ifdef CONFIG_PPC64 +int sccdbg; +#endif + +sys_ctrler_t sys_ctrler = SYS_CTRLER_UNKNOWN; +EXPORT_SYMBOL(sys_ctrler); + +static void pmac_show_cpuinfo(struct seq_file *m) +{ + struct device_node *np; + const char *pp; + int plen; + int mbmodel; + unsigned int mbflags; + char* mbname; + + mbmodel = pmac_call_feature(PMAC_FTR_GET_MB_INFO, NULL, + PMAC_MB_INFO_MODEL, 0); + mbflags = pmac_call_feature(PMAC_FTR_GET_MB_INFO, NULL, + PMAC_MB_INFO_FLAGS, 0); + if (pmac_call_feature(PMAC_FTR_GET_MB_INFO, NULL, PMAC_MB_INFO_NAME, + (long) &mbname) != 0) + mbname = "Unknown"; + + /* find motherboard type */ + seq_printf(m, "machine\t\t: "); + np = of_find_node_by_path("/"); + if (np != NULL) { + pp = of_get_property(np, "model", NULL); + if (pp != NULL) + seq_printf(m, "%s\n", pp); + else + seq_printf(m, "PowerMac\n"); + pp = of_get_property(np, "compatible", &plen); + if (pp != NULL) { + seq_printf(m, "motherboard\t:"); + while (plen > 0) { + int l = strlen(pp) + 1; + seq_printf(m, " %s", pp); + plen -= l; + pp += l; + } + seq_printf(m, "\n"); + } + of_node_put(np); + } else + seq_printf(m, "PowerMac\n"); + + /* print parsed model */ + seq_printf(m, "detected as\t: %d (%s)\n", mbmodel, mbname); + seq_printf(m, "pmac flags\t: %08x\n", mbflags); + + /* find l2 cache info */ + np = of_find_node_by_name(NULL, "l2-cache"); + if (np == NULL) + np = of_find_node_by_type(NULL, "cache"); + if (np != NULL) { + const unsigned int *ic = + of_get_property(np, "i-cache-size", NULL); + const unsigned int *dc = + of_get_property(np, "d-cache-size", NULL); + seq_printf(m, "L2 cache\t:"); + has_l2cache = 1; + if (of_get_property(np, "cache-unified", NULL) && dc) { + seq_printf(m, " %dK unified", *dc / 1024); + } else { + if (ic) + seq_printf(m, " %dK instruction", *ic / 1024); + if (dc) + seq_printf(m, "%s %dK data", + (ic? " +": ""), *dc / 1024); + } + pp = of_get_property(np, "ram-type", NULL); + if (pp) + seq_printf(m, " %s", pp); + seq_printf(m, "\n"); + of_node_put(np); + } + + /* Indicate newworld/oldworld */ + seq_printf(m, "pmac-generation\t: %s\n", + pmac_newworld ? "NewWorld" : "OldWorld"); +} + +#ifndef CONFIG_ADB_CUDA +int find_via_cuda(void) +{ + struct device_node *dn = of_find_node_by_name(NULL, "via-cuda"); + + if (!dn) + return 0; + of_node_put(dn); + printk("WARNING ! Your machine is CUDA-based but your kernel\n"); + printk(" wasn't compiled with CONFIG_ADB_CUDA option !\n"); + return 0; +} +#endif + +#ifndef CONFIG_ADB_PMU +int find_via_pmu(void) +{ + struct device_node *dn = of_find_node_by_name(NULL, "via-pmu"); + + if (!dn) + return 0; + of_node_put(dn); + printk("WARNING ! Your machine is PMU-based but your kernel\n"); + printk(" wasn't compiled with CONFIG_ADB_PMU option !\n"); + return 0; +} +#endif + +#ifndef CONFIG_PMAC_SMU +int smu_init(void) +{ + /* should check and warn if SMU is present */ + return 0; +} +#endif + +#ifdef CONFIG_PPC32 +static volatile u32 *sysctrl_regs; + +static void __init ohare_init(void) +{ + struct device_node *dn; + + /* this area has the CPU identification register + and some registers used by smp boards */ + sysctrl_regs = (volatile u32 *) ioremap(0xf8000000, 0x1000); + + /* + * Turn on the L2 cache. + * We assume that we have a PSX memory controller iff + * we have an ohare I/O controller. + */ + dn = of_find_node_by_name(NULL, "ohare"); + if (dn) { + of_node_put(dn); + if (((sysctrl_regs[2] >> 24) & 0xf) >= 3) { + if (sysctrl_regs[4] & 0x10) + sysctrl_regs[4] |= 0x04000020; + else + sysctrl_regs[4] |= 0x04000000; + if(has_l2cache) + printk(KERN_INFO "Level 2 cache enabled\n"); + } + } +} + +static void __init l2cr_init(void) +{ + /* Checks "l2cr-value" property in the registry */ + if (cpu_has_feature(CPU_FTR_L2CR)) { + struct device_node *np; + + for_each_of_cpu_node(np) { + const unsigned int *l2cr = + of_get_property(np, "l2cr-value", NULL); + if (l2cr) { + ppc_override_l2cr = 1; + ppc_override_l2cr_value = *l2cr; + _set_L2CR(0); + _set_L2CR(ppc_override_l2cr_value); + } + of_node_put(np); + break; + } + } + + if (ppc_override_l2cr) + printk(KERN_INFO "L2CR overridden (0x%x), " + "backside cache is %s\n", + ppc_override_l2cr_value, + (ppc_override_l2cr_value & 0x80000000) + ? "enabled" : "disabled"); +} +#endif + +static void __init pmac_setup_arch(void) +{ + struct device_node *cpu, *ic; + const int *fp; + unsigned long pvr; + + pvr = PVR_VER(mfspr(SPRN_PVR)); + + /* Set loops_per_jiffy to a half-way reasonable value, + for use until calibrate_delay gets called. */ + loops_per_jiffy = 50000000 / HZ; + + for_each_of_cpu_node(cpu) { + fp = of_get_property(cpu, "clock-frequency", NULL); + if (fp != NULL) { + if (pvr >= 0x30 && pvr < 0x80) + /* PPC970 etc. */ + loops_per_jiffy = *fp / (3 * HZ); + else if (pvr == 4 || pvr >= 8) + /* 604, G3, G4 etc. */ + loops_per_jiffy = *fp / HZ; + else + /* 603, etc. */ + loops_per_jiffy = *fp / (2 * HZ); + of_node_put(cpu); + break; + } + } + + /* See if newworld or oldworld */ + ic = of_find_node_with_property(NULL, "interrupt-controller"); + if (ic) { + pmac_newworld = 1; + of_node_put(ic); + } + + /* Lookup PCI hosts */ + pmac_pci_init(); + +#ifdef CONFIG_PPC32 + ohare_init(); + l2cr_init(); +#endif /* CONFIG_PPC32 */ + + find_via_cuda(); + find_via_pmu(); + smu_init(); + +#if IS_ENABLED(CONFIG_NVRAM) + pmac_nvram_init(); +#endif +#ifdef CONFIG_PPC32 +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif + ROOT_DEV = DEFAULT_ROOT_DEVICE; +#endif + +#ifdef CONFIG_ADB + if (strstr(boot_command_line, "adb_sync")) { + extern int __adb_probe_sync; + __adb_probe_sync = 1; + } +#endif /* CONFIG_ADB */ +} + +#ifdef CONFIG_SCSI +void note_scsi_host(struct device_node *node, void *host) +{ +} +EXPORT_SYMBOL(note_scsi_host); +#endif + +static int initializing = 1; + +static int pmac_late_init(void) +{ + initializing = 0; + return 0; +} +machine_late_initcall(powermac, pmac_late_init); + +void note_bootable_part(dev_t dev, int part, int goodness); +/* + * This is __ref because we check for "initializing" before + * touching any of the __init sensitive things and "initializing" + * will be false after __init time. This can't be __init because it + * can be called whenever a disk is first accessed. + */ +void __ref note_bootable_part(dev_t dev, int part, int goodness) +{ + char *p; + + if (!initializing) + return; + if ((goodness <= current_root_goodness) && + ROOT_DEV != DEFAULT_ROOT_DEVICE) + return; + p = strstr(boot_command_line, "root="); + if (p != NULL && (p == boot_command_line || p[-1] == ' ')) + return; + + ROOT_DEV = dev + part; + current_root_goodness = goodness; +} + +#ifdef CONFIG_ADB_CUDA +static void __noreturn cuda_restart(void) +{ + struct adb_request req; + + cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_RESET_SYSTEM); + for (;;) + cuda_poll(); +} + +static void __noreturn cuda_shutdown(void) +{ + struct adb_request req; + + cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_POWERDOWN); + for (;;) + cuda_poll(); +} + +#else +#define cuda_restart() +#define cuda_shutdown() +#endif + +#ifndef CONFIG_ADB_PMU +#define pmu_restart() +#define pmu_shutdown() +#endif + +#ifndef CONFIG_PMAC_SMU +#define smu_restart() +#define smu_shutdown() +#endif + +static void __noreturn pmac_restart(char *cmd) +{ + switch (sys_ctrler) { + case SYS_CTRLER_CUDA: + cuda_restart(); + break; + case SYS_CTRLER_PMU: + pmu_restart(); + break; + case SYS_CTRLER_SMU: + smu_restart(); + break; + default: ; + } + while (1) ; +} + +static void __noreturn pmac_power_off(void) +{ + switch (sys_ctrler) { + case SYS_CTRLER_CUDA: + cuda_shutdown(); + break; + case SYS_CTRLER_PMU: + pmu_shutdown(); + break; + case SYS_CTRLER_SMU: + smu_shutdown(); + break; + default: ; + } + while (1) ; +} + +static void __noreturn +pmac_halt(void) +{ + pmac_power_off(); +} + +/* + * Early initialization. + */ +static void __init pmac_init(void) +{ + /* Enable early btext debug if requested */ + if (strstr(boot_command_line, "btextdbg")) { + udbg_adb_init_early(); + register_early_udbg_console(); + } + + /* Probe motherboard chipset */ + pmac_feature_init(); + + /* Initialize debug stuff */ + udbg_scc_init(!!strstr(boot_command_line, "sccdbg")); + udbg_adb_init(!!strstr(boot_command_line, "btextdbg")); + +#ifdef CONFIG_PPC64 + iommu_init_early_dart(&pmac_pci_controller_ops); +#endif + + /* SMP Init has to be done early as we need to patch up + * cpu_possible_mask before interrupt stacks are allocated + * or kaboom... + */ +#ifdef CONFIG_SMP + pmac_setup_smp(); +#endif +} + +static int __init pmac_declare_of_platform_devices(void) +{ + struct device_node *np; + + np = of_find_node_by_name(NULL, "valkyrie"); + if (np) { + of_platform_device_create(np, "valkyrie", NULL); + of_node_put(np); + } + np = of_find_node_by_name(NULL, "platinum"); + if (np) { + of_platform_device_create(np, "platinum", NULL); + of_node_put(np); + } + np = of_find_node_by_type(NULL, "smu"); + if (np) { + of_platform_device_create(np, "smu", NULL); + of_node_put(np); + } + np = of_find_node_by_type(NULL, "fcu"); + if (np == NULL) { + /* Some machines have strangely broken device-tree */ + np = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/fan@15e"); + } + if (np) { + of_platform_device_create(np, "temperature", NULL); + of_node_put(np); + } + + return 0; +} +machine_device_initcall(powermac, pmac_declare_of_platform_devices); + +#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE +/* + * This is called very early, as part of console_init() (typically just after + * time_init()). This function is respondible for trying to find a good + * default console on serial ports. It tries to match the open firmware + * default output with one of the available serial console drivers. + */ +static int __init check_pmac_serial_console(void) +{ + struct device_node *prom_stdout = NULL; + int offset = 0; + const char *name; +#ifdef CONFIG_SERIAL_PMACZILOG_TTYS + char *devname = "ttyS"; +#else + char *devname = "ttyPZ"; +#endif + + pr_debug(" -> check_pmac_serial_console()\n"); + + /* The user has requested a console so this is already set up. */ + if (strstr(boot_command_line, "console=")) { + pr_debug(" console was specified !\n"); + return -EBUSY; + } + + if (!of_chosen) { + pr_debug(" of_chosen is NULL !\n"); + return -ENODEV; + } + + /* We are getting a weird phandle from OF ... */ + /* ... So use the full path instead */ + name = of_get_property(of_chosen, "linux,stdout-path", NULL); + if (name == NULL) { + pr_debug(" no linux,stdout-path !\n"); + return -ENODEV; + } + prom_stdout = of_find_node_by_path(name); + if (!prom_stdout) { + pr_debug(" can't find stdout package %s !\n", name); + return -ENODEV; + } + pr_debug("stdout is %pOF\n", prom_stdout); + + if (of_node_name_eq(prom_stdout, "ch-a")) + offset = 0; + else if (of_node_name_eq(prom_stdout, "ch-b")) + offset = 1; + else + goto not_found; + of_node_put(prom_stdout); + + pr_debug("Found serial console at %s%d\n", devname, offset); + + return add_preferred_console(devname, offset, NULL); + + not_found: + pr_debug("No preferred console found !\n"); + of_node_put(prom_stdout); + return -ENODEV; +} +console_initcall(check_pmac_serial_console); + +#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init pmac_probe(void) +{ + if (!of_machine_is_compatible("Power Macintosh") && + !of_machine_is_compatible("MacRISC")) + return 0; + +#ifdef CONFIG_PPC32 + /* isa_io_base gets set in pmac_pci_init */ + DMA_MODE_READ = 1; + DMA_MODE_WRITE = 2; +#endif /* CONFIG_PPC32 */ + + pm_power_off = pmac_power_off; + + pmac_init(); + + return 1; +} + +define_machine(powermac) { + .name = "PowerMac", + .probe = pmac_probe, + .setup_arch = pmac_setup_arch, + .show_cpuinfo = pmac_show_cpuinfo, + .init_IRQ = pmac_pic_init, + .get_irq = NULL, /* changed later */ + .pci_irq_fixup = pmac_pci_irq_fixup, + .restart = pmac_restart, + .halt = pmac_halt, + .time_init = pmac_time_init, + .get_boot_time = pmac_get_boot_time, + .set_rtc_time = pmac_set_rtc_time, + .get_rtc_time = pmac_get_rtc_time, + .calibrate_decr = pmac_calibrate_decr, + .feature_call = pmac_do_feature_call, + .progress = udbg_progress, +#ifdef CONFIG_PPC64 + .power_save = power4_idle, + .enable_pmcs = power4_enable_pmcs, +#endif /* CONFIG_PPC64 */ +#ifdef CONFIG_PPC32 + .pcibios_after_init = pmac_pcibios_after_init, + .phys_mem_access_prot = pci_phys_mem_access_prot, +#endif +}; diff --git a/arch/powerpc/platforms/powermac/sleep.S b/arch/powerpc/platforms/powermac/sleep.S new file mode 100644 index 000000000..d497a6000 --- /dev/null +++ b/arch/powerpc/platforms/powermac/sleep.S @@ -0,0 +1,433 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * This file contains sleep low-level functions for PowerBook G3. + * Copyright (C) 1999 Benjamin Herrenschmidt (benh@kernel.crashing.org) + * and Paul Mackerras (paulus@samba.org). + */ + +#include <asm/processor.h> +#include <asm/page.h> +#include <asm/ppc_asm.h> +#include <asm/cputable.h> +#include <asm/cache.h> +#include <asm/thread_info.h> +#include <asm/asm-offsets.h> +#include <asm/mmu.h> +#include <asm/feature-fixups.h> + +#define MAGIC 0x4c617273 /* 'Lars' */ + +/* + * Structure for storing CPU registers on the stack. + */ +#define SL_SP 0 +#define SL_PC 4 +#define SL_MSR 8 +#define SL_SDR1 0xc +#define SL_SPRG0 0x10 /* 4 sprg's */ +#define SL_DBAT0 0x20 +#define SL_IBAT0 0x28 +#define SL_DBAT1 0x30 +#define SL_IBAT1 0x38 +#define SL_DBAT2 0x40 +#define SL_IBAT2 0x48 +#define SL_DBAT3 0x50 +#define SL_IBAT3 0x58 +#define SL_DBAT4 0x60 +#define SL_IBAT4 0x68 +#define SL_DBAT5 0x70 +#define SL_IBAT5 0x78 +#define SL_DBAT6 0x80 +#define SL_IBAT6 0x88 +#define SL_DBAT7 0x90 +#define SL_IBAT7 0x98 +#define SL_TB 0xa0 +#define SL_R2 0xa8 +#define SL_CR 0xac +#define SL_LR 0xb0 +#define SL_R12 0xb4 /* r12 to r31 */ +#define SL_SIZE (SL_R12 + 80) + + .section .text + .align 5 + +#if defined(CONFIG_PM) || defined(CONFIG_CPU_FREQ_PMAC) || \ + (defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32)) + +/* This gets called by via-pmu.c late during the sleep process. + * The PMU was already send the sleep command and will shut us down + * soon. We need to save all that is needed and setup the wakeup + * vector that will be called by the ROM on wakeup + */ +_GLOBAL(low_sleep_handler) +#ifndef CONFIG_PPC_BOOK3S_32 + blr +#else + mflr r0 + lis r11,sleep_storage@ha + addi r11,r11,sleep_storage@l + stw r0,SL_LR(r11) + mfcr r0 + stw r0,SL_CR(r11) + stw r1,SL_SP(r11) + stw r2,SL_R2(r11) + stmw r12,SL_R12(r11) + + /* Save MSR & SDR1 */ + mfmsr r4 + stw r4,SL_MSR(r11) + mfsdr1 r4 + stw r4,SL_SDR1(r11) + + /* Get a stable timebase and save it */ +1: mftbu r4 + stw r4,SL_TB(r11) + mftb r5 + stw r5,SL_TB+4(r11) + mftbu r3 + cmpw r3,r4 + bne 1b + + /* Save SPRGs */ + mfsprg r4,0 + stw r4,SL_SPRG0(r11) + mfsprg r4,1 + stw r4,SL_SPRG0+4(r11) + mfsprg r4,2 + stw r4,SL_SPRG0+8(r11) + mfsprg r4,3 + stw r4,SL_SPRG0+12(r11) + + /* Save BATs */ + mfdbatu r4,0 + stw r4,SL_DBAT0(r11) + mfdbatl r4,0 + stw r4,SL_DBAT0+4(r11) + mfdbatu r4,1 + stw r4,SL_DBAT1(r11) + mfdbatl r4,1 + stw r4,SL_DBAT1+4(r11) + mfdbatu r4,2 + stw r4,SL_DBAT2(r11) + mfdbatl r4,2 + stw r4,SL_DBAT2+4(r11) + mfdbatu r4,3 + stw r4,SL_DBAT3(r11) + mfdbatl r4,3 + stw r4,SL_DBAT3+4(r11) + mfibatu r4,0 + stw r4,SL_IBAT0(r11) + mfibatl r4,0 + stw r4,SL_IBAT0+4(r11) + mfibatu r4,1 + stw r4,SL_IBAT1(r11) + mfibatl r4,1 + stw r4,SL_IBAT1+4(r11) + mfibatu r4,2 + stw r4,SL_IBAT2(r11) + mfibatl r4,2 + stw r4,SL_IBAT2+4(r11) + mfibatu r4,3 + stw r4,SL_IBAT3(r11) + mfibatl r4,3 + stw r4,SL_IBAT3+4(r11) + +BEGIN_MMU_FTR_SECTION + mfspr r4,SPRN_DBAT4U + stw r4,SL_DBAT4(r11) + mfspr r4,SPRN_DBAT4L + stw r4,SL_DBAT4+4(r11) + mfspr r4,SPRN_DBAT5U + stw r4,SL_DBAT5(r11) + mfspr r4,SPRN_DBAT5L + stw r4,SL_DBAT5+4(r11) + mfspr r4,SPRN_DBAT6U + stw r4,SL_DBAT6(r11) + mfspr r4,SPRN_DBAT6L + stw r4,SL_DBAT6+4(r11) + mfspr r4,SPRN_DBAT7U + stw r4,SL_DBAT7(r11) + mfspr r4,SPRN_DBAT7L + stw r4,SL_DBAT7+4(r11) + mfspr r4,SPRN_IBAT4U + stw r4,SL_IBAT4(r11) + mfspr r4,SPRN_IBAT4L + stw r4,SL_IBAT4+4(r11) + mfspr r4,SPRN_IBAT5U + stw r4,SL_IBAT5(r11) + mfspr r4,SPRN_IBAT5L + stw r4,SL_IBAT5+4(r11) + mfspr r4,SPRN_IBAT6U + stw r4,SL_IBAT6(r11) + mfspr r4,SPRN_IBAT6L + stw r4,SL_IBAT6+4(r11) + mfspr r4,SPRN_IBAT7U + stw r4,SL_IBAT7(r11) + mfspr r4,SPRN_IBAT7L + stw r4,SL_IBAT7+4(r11) +END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS) + + /* Backup various CPU config stuffs */ + bl __save_cpu_setup + + /* The ROM can wake us up via 2 different vectors: + * - On wallstreet & lombard, we must write a magic + * value 'Lars' at address 4 and a pointer to a + * memory location containing the PC to resume from + * at address 0. + * - On Core99, we must store the wakeup vector at + * address 0x80 and eventually it's parameters + * at address 0x84. I've have some trouble with those + * parameters however and I no longer use them. + */ + lis r5,grackle_wake_up@ha + addi r5,r5,grackle_wake_up@l + tophys(r5,r5) + stw r5,SL_PC(r11) + lis r4,KERNELBASE@h + tophys(r5,r11) + addi r5,r5,SL_PC + lis r6,MAGIC@ha + addi r6,r6,MAGIC@l + stw r5,0(r4) + stw r6,4(r4) + /* Setup stuffs at 0x80-0x84 for Core99 */ + lis r3,core99_wake_up@ha + addi r3,r3,core99_wake_up@l + tophys(r3,r3) + stw r3,0x80(r4) + stw r5,0x84(r4) + + .globl low_cpu_offline_self +low_cpu_offline_self: + /* Flush & disable all caches */ + bl flush_disable_caches + + /* Turn off data relocation. */ + mfmsr r3 /* Save MSR in r7 */ + rlwinm r3,r3,0,28,26 /* Turn off DR bit */ + sync + mtmsr r3 + isync + +BEGIN_FTR_SECTION + /* Flush any pending L2 data prefetches to work around HW bug */ + sync + lis r3,0xfff0 + lwz r0,0(r3) /* perform cache-inhibited load to ROM */ + sync /* (caches are disabled at this point) */ +END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) + +/* + * Set the HID0 and MSR for sleep. + */ + mfspr r2,SPRN_HID0 + rlwinm r2,r2,0,10,7 /* clear doze, nap */ + oris r2,r2,HID0_SLEEP@h + sync + isync + mtspr SPRN_HID0,r2 + sync + +/* This loop puts us back to sleep in case we have a spurrious + * wakeup so that the host bridge properly stays asleep. The + * CPU will be turned off, either after a known time (about 1 + * second) on wallstreet & lombard, or as soon as the CPU enters + * SLEEP mode on core99 + */ + mfmsr r2 + oris r2,r2,MSR_POW@h +1: sync + mtmsr r2 + isync + b 1b +_ASM_NOKPROBE_SYMBOL(low_cpu_offline_self) +/* + * Here is the resume code. + */ + + +/* + * Core99 machines resume here + * r4 has the physical address of SL_PC(sp) (unused) + */ +_GLOBAL(core99_wake_up) + /* Make sure HID0 no longer contains any sleep bit and that data cache + * is disabled + */ + mfspr r3,SPRN_HID0 + rlwinm r3,r3,0,11,7 /* clear SLEEP, NAP, DOZE bits */ + rlwinm 3,r3,0,18,15 /* clear DCE, ICE */ + mtspr SPRN_HID0,r3 + sync + isync + + /* sanitize MSR */ + mfmsr r3 + ori r3,r3,MSR_EE|MSR_IP + xori r3,r3,MSR_EE|MSR_IP + sync + isync + mtmsr r3 + sync + isync + + /* Recover sleep storage */ + lis r3,sleep_storage@ha + addi r3,r3,sleep_storage@l + tophys(r3,r3) + addi r1,r3,SL_PC + + /* Pass thru to older resume code ... */ +_ASM_NOKPROBE_SYMBOL(core99_wake_up) +/* + * Here is the resume code for older machines. + * r1 has the physical address of SL_PC(sp). + */ + +grackle_wake_up: + + /* Restore the kernel's segment registers before + * we do any r1 memory access as we are not sure they + * are in a sane state above the first 256Mb region + */ + bl load_segment_registers + sync + isync + + subi r1,r1,SL_PC + + /* Restore various CPU config stuffs */ + bl __restore_cpu_setup + + /* Make sure all FPRs have been initialized */ + bl reloc_offset + bl __init_fpu_registers + + /* Invalidate & enable L1 cache, we don't care about + * whatever the ROM may have tried to write to memory + */ + bl __inval_enable_L1 + + /* Restore the BATs, and SDR1. Then we can turn on the MMU. */ + lwz r4,SL_SDR1(r1) + mtsdr1 r4 + lwz r4,SL_SPRG0(r1) + mtsprg 0,r4 + lwz r4,SL_SPRG0+4(r1) + mtsprg 1,r4 + lwz r4,SL_SPRG0+8(r1) + mtsprg 2,r4 + lwz r4,SL_SPRG0+12(r1) + mtsprg 3,r4 + + lwz r4,SL_DBAT0(r1) + mtdbatu 0,r4 + lwz r4,SL_DBAT0+4(r1) + mtdbatl 0,r4 + lwz r4,SL_DBAT1(r1) + mtdbatu 1,r4 + lwz r4,SL_DBAT1+4(r1) + mtdbatl 1,r4 + lwz r4,SL_DBAT2(r1) + mtdbatu 2,r4 + lwz r4,SL_DBAT2+4(r1) + mtdbatl 2,r4 + lwz r4,SL_DBAT3(r1) + mtdbatu 3,r4 + lwz r4,SL_DBAT3+4(r1) + mtdbatl 3,r4 + lwz r4,SL_IBAT0(r1) + mtibatu 0,r4 + lwz r4,SL_IBAT0+4(r1) + mtibatl 0,r4 + lwz r4,SL_IBAT1(r1) + mtibatu 1,r4 + lwz r4,SL_IBAT1+4(r1) + mtibatl 1,r4 + lwz r4,SL_IBAT2(r1) + mtibatu 2,r4 + lwz r4,SL_IBAT2+4(r1) + mtibatl 2,r4 + lwz r4,SL_IBAT3(r1) + mtibatu 3,r4 + lwz r4,SL_IBAT3+4(r1) + mtibatl 3,r4 + +BEGIN_MMU_FTR_SECTION + lwz r4,SL_DBAT4(r1) + mtspr SPRN_DBAT4U,r4 + lwz r4,SL_DBAT4+4(r1) + mtspr SPRN_DBAT4L,r4 + lwz r4,SL_DBAT5(r1) + mtspr SPRN_DBAT5U,r4 + lwz r4,SL_DBAT5+4(r1) + mtspr SPRN_DBAT5L,r4 + lwz r4,SL_DBAT6(r1) + mtspr SPRN_DBAT6U,r4 + lwz r4,SL_DBAT6+4(r1) + mtspr SPRN_DBAT6L,r4 + lwz r4,SL_DBAT7(r1) + mtspr SPRN_DBAT7U,r4 + lwz r4,SL_DBAT7+4(r1) + mtspr SPRN_DBAT7L,r4 + lwz r4,SL_IBAT4(r1) + mtspr SPRN_IBAT4U,r4 + lwz r4,SL_IBAT4+4(r1) + mtspr SPRN_IBAT4L,r4 + lwz r4,SL_IBAT5(r1) + mtspr SPRN_IBAT5U,r4 + lwz r4,SL_IBAT5+4(r1) + mtspr SPRN_IBAT5L,r4 + lwz r4,SL_IBAT6(r1) + mtspr SPRN_IBAT6U,r4 + lwz r4,SL_IBAT6+4(r1) + mtspr SPRN_IBAT6L,r4 + lwz r4,SL_IBAT7(r1) + mtspr SPRN_IBAT7U,r4 + lwz r4,SL_IBAT7+4(r1) + mtspr SPRN_IBAT7L,r4 +END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS) + + /* Flush all TLBs */ + lis r4,0x1000 +1: addic. r4,r4,-0x1000 + tlbie r4 + blt 1b + sync + + /* Restore TB */ + li r3,0 + mttbl r3 + lwz r3,SL_TB(r1) + lwz r4,SL_TB+4(r1) + mttbu r3 + mttbl r4 + + /* Restore the callee-saved registers and return */ + lwz r0,SL_CR(r1) + mtcr r0 + lwz r2,SL_R2(r1) + lmw r12,SL_R12(r1) + + /* restore the MSR and SP and turn on the MMU and return */ + lwz r3,SL_MSR(r1) + lwz r4,SL_LR(r1) + lwz r1,SL_SP(r1) + mtsrr0 r4 + mtsrr1 r3 + sync + isync + rfi +_ASM_NOKPROBE_SYMBOL(grackle_wake_up) + +#endif /* defined(CONFIG_PM) || defined(CONFIG_CPU_FREQ) */ + + .section .bss + .balign L1_CACHE_BYTES +sleep_storage: + .space SL_SIZE + .balign L1_CACHE_BYTES, 0 + +#endif /* CONFIG_PPC_BOOK3S_32 */ + .section .text diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c new file mode 100644 index 000000000..adae2a671 --- /dev/null +++ b/arch/powerpc/platforms/powermac/smp.c @@ -0,0 +1,1025 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * SMP support for power macintosh. + * + * We support both the old "powersurge" SMP architecture + * and the current Core99 (G4 PowerMac) machines. + * + * Note that we don't support the very first rev. of + * Apple/DayStar 2 CPUs board, the one with the funky + * watchdog. Hopefully, none of these should be there except + * maybe internally to Apple. I should probably still add some + * code to detect this card though and disable SMP. --BenH. + * + * Support Macintosh G4 SMP by Troy Benjegerdes (hozer@drgw.net) + * and Ben Herrenschmidt <benh@kernel.crashing.org>. + * + * Support for DayStar quad CPU cards + * Copyright (C) XLR8, Inc. 1994-2000 + */ +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/sched/hotplug.h> +#include <linux/smp.h> +#include <linux/interrupt.h> +#include <linux/kernel_stat.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/errno.h> +#include <linux/hardirq.h> +#include <linux/cpu.h> +#include <linux/compiler.h> +#include <linux/pgtable.h> + +#include <asm/ptrace.h> +#include <linux/atomic.h> +#include <asm/code-patching.h> +#include <asm/irq.h> +#include <asm/page.h> +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/smp.h> +#include <asm/machdep.h> +#include <asm/pmac_feature.h> +#include <asm/time.h> +#include <asm/mpic.h> +#include <asm/cacheflush.h> +#include <asm/keylargo.h> +#include <asm/pmac_low_i2c.h> +#include <asm/pmac_pfunc.h> +#include <asm/inst.h> + +#include "pmac.h" + +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +extern void __secondary_start_pmac_0(void); + +static void (*pmac_tb_freeze)(int freeze); +static u64 timebase; +static int tb_req; + +#ifdef CONFIG_PPC_PMAC32_PSURGE + +/* + * Powersurge (old powermac SMP) support. + */ + +/* Addresses for powersurge registers */ +#define HAMMERHEAD_BASE 0xf8000000 +#define HHEAD_CONFIG 0x90 +#define HHEAD_SEC_INTR 0xc0 + +/* register for interrupting the primary processor on the powersurge */ +/* N.B. this is actually the ethernet ROM! */ +#define PSURGE_PRI_INTR 0xf3019000 + +/* register for storing the start address for the secondary processor */ +/* N.B. this is the PCI config space address register for the 1st bridge */ +#define PSURGE_START 0xf2800000 + +/* Daystar/XLR8 4-CPU card */ +#define PSURGE_QUAD_REG_ADDR 0xf8800000 + +#define PSURGE_QUAD_IRQ_SET 0 +#define PSURGE_QUAD_IRQ_CLR 1 +#define PSURGE_QUAD_IRQ_PRIMARY 2 +#define PSURGE_QUAD_CKSTOP_CTL 3 +#define PSURGE_QUAD_PRIMARY_ARB 4 +#define PSURGE_QUAD_BOARD_ID 6 +#define PSURGE_QUAD_WHICH_CPU 7 +#define PSURGE_QUAD_CKSTOP_RDBK 8 +#define PSURGE_QUAD_RESET_CTL 11 + +#define PSURGE_QUAD_OUT(r, v) (out_8(quad_base + ((r) << 4) + 4, (v))) +#define PSURGE_QUAD_IN(r) (in_8(quad_base + ((r) << 4) + 4) & 0x0f) +#define PSURGE_QUAD_BIS(r, v) (PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) | (v))) +#define PSURGE_QUAD_BIC(r, v) (PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) & ~(v))) + +/* virtual addresses for the above */ +static volatile u8 __iomem *hhead_base; +static volatile u8 __iomem *quad_base; +static volatile u32 __iomem *psurge_pri_intr; +static volatile u8 __iomem *psurge_sec_intr; +static volatile u32 __iomem *psurge_start; + +/* values for psurge_type */ +#define PSURGE_NONE -1 +#define PSURGE_DUAL 0 +#define PSURGE_QUAD_OKEE 1 +#define PSURGE_QUAD_COTTON 2 +#define PSURGE_QUAD_ICEGRASS 3 + +/* what sort of powersurge board we have */ +static int psurge_type = PSURGE_NONE; + +/* irq for secondary cpus to report */ +static struct irq_domain *psurge_host; +int psurge_secondary_virq; + +/* + * Set and clear IPIs for powersurge. + */ +static inline void psurge_set_ipi(int cpu) +{ + if (psurge_type == PSURGE_NONE) + return; + if (cpu == 0) + in_be32(psurge_pri_intr); + else if (psurge_type == PSURGE_DUAL) + out_8(psurge_sec_intr, 0); + else + PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_SET, 1 << cpu); +} + +static inline void psurge_clr_ipi(int cpu) +{ + if (cpu > 0) { + switch(psurge_type) { + case PSURGE_DUAL: + out_8(psurge_sec_intr, ~0); + case PSURGE_NONE: + break; + default: + PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, 1 << cpu); + } + } +} + +/* + * On powersurge (old SMP powermac architecture) we don't have + * separate IPIs for separate messages like openpic does. Instead + * use the generic demux helpers + * -- paulus. + */ +static irqreturn_t psurge_ipi_intr(int irq, void *d) +{ + psurge_clr_ipi(smp_processor_id()); + smp_ipi_demux(); + + return IRQ_HANDLED; +} + +static void smp_psurge_cause_ipi(int cpu) +{ + psurge_set_ipi(cpu); +} + +static int psurge_host_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + irq_set_chip_and_handler(virq, &dummy_irq_chip, handle_percpu_irq); + + return 0; +} + +static const struct irq_domain_ops psurge_host_ops = { + .map = psurge_host_map, +}; + +static int psurge_secondary_ipi_init(void) +{ + int rc = -ENOMEM; + + psurge_host = irq_domain_add_nomap(NULL, ~0, &psurge_host_ops, NULL); + + if (psurge_host) + psurge_secondary_virq = irq_create_direct_mapping(psurge_host); + + if (psurge_secondary_virq) + rc = request_irq(psurge_secondary_virq, psurge_ipi_intr, + IRQF_PERCPU | IRQF_NO_THREAD, "IPI", NULL); + + if (rc) + pr_err("Failed to setup secondary cpu IPI\n"); + + return rc; +} + +/* + * Determine a quad card presence. We read the board ID register, we + * force the data bus to change to something else, and we read it again. + * It it's stable, then the register probably exist (ugh !) + */ +static int __init psurge_quad_probe(void) +{ + int type; + unsigned int i; + + type = PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID); + if (type < PSURGE_QUAD_OKEE || type > PSURGE_QUAD_ICEGRASS + || type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID)) + return PSURGE_DUAL; + + /* looks OK, try a slightly more rigorous test */ + /* bogus is not necessarily cacheline-aligned, + though I don't suppose that really matters. -- paulus */ + for (i = 0; i < 100; i++) { + volatile u32 bogus[8]; + bogus[(0+i)%8] = 0x00000000; + bogus[(1+i)%8] = 0x55555555; + bogus[(2+i)%8] = 0xFFFFFFFF; + bogus[(3+i)%8] = 0xAAAAAAAA; + bogus[(4+i)%8] = 0x33333333; + bogus[(5+i)%8] = 0xCCCCCCCC; + bogus[(6+i)%8] = 0xCCCCCCCC; + bogus[(7+i)%8] = 0x33333333; + wmb(); + asm volatile("dcbf 0,%0" : : "r" (bogus) : "memory"); + mb(); + if (type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID)) + return PSURGE_DUAL; + } + return type; +} + +static void __init psurge_quad_init(void) +{ + int procbits; + + if (ppc_md.progress) ppc_md.progress("psurge_quad_init", 0x351); + procbits = ~PSURGE_QUAD_IN(PSURGE_QUAD_WHICH_CPU); + if (psurge_type == PSURGE_QUAD_ICEGRASS) + PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits); + else + PSURGE_QUAD_BIC(PSURGE_QUAD_CKSTOP_CTL, procbits); + mdelay(33); + out_8(psurge_sec_intr, ~0); + PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, procbits); + PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits); + if (psurge_type != PSURGE_QUAD_ICEGRASS) + PSURGE_QUAD_BIS(PSURGE_QUAD_CKSTOP_CTL, procbits); + PSURGE_QUAD_BIC(PSURGE_QUAD_PRIMARY_ARB, procbits); + mdelay(33); + PSURGE_QUAD_BIC(PSURGE_QUAD_RESET_CTL, procbits); + mdelay(33); + PSURGE_QUAD_BIS(PSURGE_QUAD_PRIMARY_ARB, procbits); + mdelay(33); +} + +static void __init smp_psurge_probe(void) +{ + int i, ncpus; + struct device_node *dn; + + /* + * The powersurge cpu board can be used in the generation + * of powermacs that have a socket for an upgradeable cpu card, + * including the 7500, 8500, 9500, 9600. + * The device tree doesn't tell you if you have 2 cpus because + * OF doesn't know anything about the 2nd processor. + * Instead we look for magic bits in magic registers, + * in the hammerhead memory controller in the case of the + * dual-cpu powersurge board. -- paulus. + */ + dn = of_find_node_by_name(NULL, "hammerhead"); + if (dn == NULL) + return; + of_node_put(dn); + + hhead_base = ioremap(HAMMERHEAD_BASE, 0x800); + quad_base = ioremap(PSURGE_QUAD_REG_ADDR, 1024); + psurge_sec_intr = hhead_base + HHEAD_SEC_INTR; + + psurge_type = psurge_quad_probe(); + if (psurge_type != PSURGE_DUAL) { + psurge_quad_init(); + /* All released cards using this HW design have 4 CPUs */ + ncpus = 4; + /* No sure how timebase sync works on those, let's use SW */ + smp_ops->give_timebase = smp_generic_give_timebase; + smp_ops->take_timebase = smp_generic_take_timebase; + } else { + iounmap(quad_base); + if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) { + /* not a dual-cpu card */ + iounmap(hhead_base); + psurge_type = PSURGE_NONE; + return; + } + ncpus = 2; + } + + if (psurge_secondary_ipi_init()) + return; + + psurge_start = ioremap(PSURGE_START, 4); + psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4); + + /* This is necessary because OF doesn't know about the + * secondary cpu(s), and thus there aren't nodes in the + * device tree for them, and smp_setup_cpu_maps hasn't + * set their bits in cpu_present_mask. + */ + if (ncpus > NR_CPUS) + ncpus = NR_CPUS; + for (i = 1; i < ncpus ; ++i) + set_cpu_present(i, true); + + if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352); +} + +static int __init smp_psurge_kick_cpu(int nr) +{ + unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8; + unsigned long a, flags; + int i, j; + + /* Defining this here is evil ... but I prefer hiding that + * crap to avoid giving people ideas that they can do the + * same. + */ + extern volatile unsigned int cpu_callin_map[NR_CPUS]; + + /* may need to flush here if secondary bats aren't setup */ + for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32) + asm volatile("dcbf 0,%0" : : "r" (a) : "memory"); + asm volatile("sync"); + + if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353); + + /* This is going to freeze the timeebase, we disable interrupts */ + local_irq_save(flags); + + out_be32(psurge_start, start); + mb(); + + psurge_set_ipi(nr); + + /* + * We can't use udelay here because the timebase is now frozen. + */ + for (i = 0; i < 2000; ++i) + asm volatile("nop" : : : "memory"); + psurge_clr_ipi(nr); + + /* + * Also, because the timebase is frozen, we must not return to the + * caller which will try to do udelay's etc... Instead, we wait -here- + * for the CPU to callin. + */ + for (i = 0; i < 100000 && !cpu_callin_map[nr]; ++i) { + for (j = 1; j < 10000; j++) + asm volatile("nop" : : : "memory"); + asm volatile("sync" : : : "memory"); + } + if (!cpu_callin_map[nr]) + goto stuck; + + /* And we do the TB sync here too for standard dual CPU cards */ + if (psurge_type == PSURGE_DUAL) { + while(!tb_req) + barrier(); + tb_req = 0; + mb(); + timebase = get_tb(); + mb(); + while (timebase) + barrier(); + mb(); + } + stuck: + /* now interrupt the secondary, restarting both TBs */ + if (psurge_type == PSURGE_DUAL) + psurge_set_ipi(1); + + if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354); + + return 0; +} + +static void __init smp_psurge_setup_cpu(int cpu_nr) +{ + unsigned long flags = IRQF_PERCPU | IRQF_NO_THREAD; + int irq; + + if (cpu_nr != 0 || !psurge_start) + return; + + /* reset the entry point so if we get another intr we won't + * try to startup again */ + out_be32(psurge_start, 0x100); + irq = irq_create_mapping(NULL, 30); + if (request_irq(irq, psurge_ipi_intr, flags, "primary IPI", NULL)) + printk(KERN_ERR "Couldn't get primary IPI interrupt"); +} + +void __init smp_psurge_take_timebase(void) +{ + if (psurge_type != PSURGE_DUAL) + return; + + tb_req = 1; + mb(); + while (!timebase) + barrier(); + mb(); + set_tb(timebase >> 32, timebase & 0xffffffff); + timebase = 0; + mb(); + set_dec(tb_ticks_per_jiffy/2); +} + +void __init smp_psurge_give_timebase(void) +{ + /* Nothing to do here */ +} + +/* PowerSurge-style Macs */ +struct smp_ops_t psurge_smp_ops = { + .message_pass = NULL, /* Use smp_muxed_ipi_message_pass */ + .cause_ipi = smp_psurge_cause_ipi, + .cause_nmi_ipi = NULL, + .probe = smp_psurge_probe, + .kick_cpu = smp_psurge_kick_cpu, + .setup_cpu = smp_psurge_setup_cpu, + .give_timebase = smp_psurge_give_timebase, + .take_timebase = smp_psurge_take_timebase, +}; +#endif /* CONFIG_PPC_PMAC32_PSURGE */ + +/* + * Core 99 and later support + */ + + +static void smp_core99_give_timebase(void) +{ + unsigned long flags; + + local_irq_save(flags); + + while(!tb_req) + barrier(); + tb_req = 0; + (*pmac_tb_freeze)(1); + mb(); + timebase = get_tb(); + mb(); + while (timebase) + barrier(); + mb(); + (*pmac_tb_freeze)(0); + mb(); + + local_irq_restore(flags); +} + + +static void smp_core99_take_timebase(void) +{ + unsigned long flags; + + local_irq_save(flags); + + tb_req = 1; + mb(); + while (!timebase) + barrier(); + mb(); + set_tb(timebase >> 32, timebase & 0xffffffff); + timebase = 0; + mb(); + + local_irq_restore(flags); +} + +#ifdef CONFIG_PPC64 +/* + * G5s enable/disable the timebase via an i2c-connected clock chip. + */ +static struct pmac_i2c_bus *pmac_tb_clock_chip_host; +static u8 pmac_tb_pulsar_addr; + +static void smp_core99_cypress_tb_freeze(int freeze) +{ + u8 data; + int rc; + + /* Strangely, the device-tree says address is 0xd2, but darwin + * accesses 0xd0 ... + */ + pmac_i2c_setmode(pmac_tb_clock_chip_host, + pmac_i2c_mode_combined); + rc = pmac_i2c_xfer(pmac_tb_clock_chip_host, + 0xd0 | pmac_i2c_read, + 1, 0x81, &data, 1); + if (rc != 0) + goto bail; + + data = (data & 0xf3) | (freeze ? 0x00 : 0x0c); + + pmac_i2c_setmode(pmac_tb_clock_chip_host, pmac_i2c_mode_stdsub); + rc = pmac_i2c_xfer(pmac_tb_clock_chip_host, + 0xd0 | pmac_i2c_write, + 1, 0x81, &data, 1); + + bail: + if (rc != 0) { + printk("Cypress Timebase %s rc: %d\n", + freeze ? "freeze" : "unfreeze", rc); + panic("Timebase freeze failed !\n"); + } +} + + +static void smp_core99_pulsar_tb_freeze(int freeze) +{ + u8 data; + int rc; + + pmac_i2c_setmode(pmac_tb_clock_chip_host, + pmac_i2c_mode_combined); + rc = pmac_i2c_xfer(pmac_tb_clock_chip_host, + pmac_tb_pulsar_addr | pmac_i2c_read, + 1, 0x2e, &data, 1); + if (rc != 0) + goto bail; + + data = (data & 0x88) | (freeze ? 0x11 : 0x22); + + pmac_i2c_setmode(pmac_tb_clock_chip_host, pmac_i2c_mode_stdsub); + rc = pmac_i2c_xfer(pmac_tb_clock_chip_host, + pmac_tb_pulsar_addr | pmac_i2c_write, + 1, 0x2e, &data, 1); + bail: + if (rc != 0) { + printk(KERN_ERR "Pulsar Timebase %s rc: %d\n", + freeze ? "freeze" : "unfreeze", rc); + panic("Timebase freeze failed !\n"); + } +} + +static void __init smp_core99_setup_i2c_hwsync(int ncpus) +{ + struct device_node *cc = NULL; + struct device_node *p; + const char *name = NULL; + const u32 *reg; + int ok; + + /* Look for the clock chip */ + for_each_node_by_name(cc, "i2c-hwclock") { + p = of_get_parent(cc); + ok = p && of_device_is_compatible(p, "uni-n-i2c"); + of_node_put(p); + if (!ok) + continue; + + pmac_tb_clock_chip_host = pmac_i2c_find_bus(cc); + if (pmac_tb_clock_chip_host == NULL) + continue; + reg = of_get_property(cc, "reg", NULL); + if (reg == NULL) + continue; + switch (*reg) { + case 0xd2: + if (of_device_is_compatible(cc,"pulsar-legacy-slewing")) { + pmac_tb_freeze = smp_core99_pulsar_tb_freeze; + pmac_tb_pulsar_addr = 0xd2; + name = "Pulsar"; + } else if (of_device_is_compatible(cc, "cy28508")) { + pmac_tb_freeze = smp_core99_cypress_tb_freeze; + name = "Cypress"; + } + break; + case 0xd4: + pmac_tb_freeze = smp_core99_pulsar_tb_freeze; + pmac_tb_pulsar_addr = 0xd4; + name = "Pulsar"; + break; + } + if (pmac_tb_freeze != NULL) + break; + } + if (pmac_tb_freeze != NULL) { + /* Open i2c bus for synchronous access */ + if (pmac_i2c_open(pmac_tb_clock_chip_host, 1)) { + printk(KERN_ERR "Failed top open i2c bus for clock" + " sync, fallback to software sync !\n"); + goto no_i2c_sync; + } + printk(KERN_INFO "Processor timebase sync using %s i2c clock\n", + name); + return; + } + no_i2c_sync: + pmac_tb_freeze = NULL; + pmac_tb_clock_chip_host = NULL; +} + + + +/* + * Newer G5s uses a platform function + */ + +static void smp_core99_pfunc_tb_freeze(int freeze) +{ + struct device_node *cpus; + struct pmf_args args; + + cpus = of_find_node_by_path("/cpus"); + BUG_ON(cpus == NULL); + args.count = 1; + args.u[0].v = !freeze; + pmf_call_function(cpus, "cpu-timebase", &args); + of_node_put(cpus); +} + +#else /* CONFIG_PPC64 */ + +/* + * SMP G4 use a GPIO to enable/disable the timebase. + */ + +static unsigned int core99_tb_gpio; /* Timebase freeze GPIO */ + +static void smp_core99_gpio_tb_freeze(int freeze) +{ + if (freeze) + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 4); + else + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0); + pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0); +} + + +#endif /* !CONFIG_PPC64 */ + +static void core99_init_caches(int cpu) +{ +#ifndef CONFIG_PPC64 + /* L2 and L3 cache settings to pass from CPU0 to CPU1 on G4 cpus */ + static long int core99_l2_cache; + static long int core99_l3_cache; + + if (!cpu_has_feature(CPU_FTR_L2CR)) + return; + + if (cpu == 0) { + core99_l2_cache = _get_L2CR(); + printk("CPU0: L2CR is %lx\n", core99_l2_cache); + } else { + printk("CPU%d: L2CR was %lx\n", cpu, _get_L2CR()); + _set_L2CR(0); + _set_L2CR(core99_l2_cache); + printk("CPU%d: L2CR set to %lx\n", cpu, core99_l2_cache); + } + + if (!cpu_has_feature(CPU_FTR_L3CR)) + return; + + if (cpu == 0){ + core99_l3_cache = _get_L3CR(); + printk("CPU0: L3CR is %lx\n", core99_l3_cache); + } else { + printk("CPU%d: L3CR was %lx\n", cpu, _get_L3CR()); + _set_L3CR(0); + _set_L3CR(core99_l3_cache); + printk("CPU%d: L3CR set to %lx\n", cpu, core99_l3_cache); + } +#endif /* !CONFIG_PPC64 */ +} + +static void __init smp_core99_setup(int ncpus) +{ +#ifdef CONFIG_PPC64 + + /* i2c based HW sync on some G5s */ + if (of_machine_is_compatible("PowerMac7,2") || + of_machine_is_compatible("PowerMac7,3") || + of_machine_is_compatible("RackMac3,1")) + smp_core99_setup_i2c_hwsync(ncpus); + + /* pfunc based HW sync on recent G5s */ + if (pmac_tb_freeze == NULL) { + struct device_node *cpus = + of_find_node_by_path("/cpus"); + if (cpus && + of_get_property(cpus, "platform-cpu-timebase", NULL)) { + pmac_tb_freeze = smp_core99_pfunc_tb_freeze; + printk(KERN_INFO "Processor timebase sync using" + " platform function\n"); + } + } + +#else /* CONFIG_PPC64 */ + + /* GPIO based HW sync on ppc32 Core99 */ + if (pmac_tb_freeze == NULL && !of_machine_is_compatible("MacRISC4")) { + struct device_node *cpu; + const u32 *tbprop = NULL; + + core99_tb_gpio = KL_GPIO_TB_ENABLE; /* default value */ + cpu = of_find_node_by_type(NULL, "cpu"); + if (cpu != NULL) { + tbprop = of_get_property(cpu, "timebase-enable", NULL); + if (tbprop) + core99_tb_gpio = *tbprop; + of_node_put(cpu); + } + pmac_tb_freeze = smp_core99_gpio_tb_freeze; + printk(KERN_INFO "Processor timebase sync using" + " GPIO 0x%02x\n", core99_tb_gpio); + } + +#endif /* CONFIG_PPC64 */ + + /* No timebase sync, fallback to software */ + if (pmac_tb_freeze == NULL) { + smp_ops->give_timebase = smp_generic_give_timebase; + smp_ops->take_timebase = smp_generic_take_timebase; + printk(KERN_INFO "Processor timebase sync using software\n"); + } + +#ifndef CONFIG_PPC64 + { + int i; + + /* XXX should get this from reg properties */ + for (i = 1; i < ncpus; ++i) + set_hard_smp_processor_id(i, i); + } +#endif + + /* 32 bits SMP can't NAP */ + if (!of_machine_is_compatible("MacRISC4")) + powersave_nap = 0; +} + +static void __init smp_core99_probe(void) +{ + struct device_node *cpus; + int ncpus = 0; + + if (ppc_md.progress) ppc_md.progress("smp_core99_probe", 0x345); + + /* Count CPUs in the device-tree */ + for_each_node_by_type(cpus, "cpu") + ++ncpus; + + printk(KERN_INFO "PowerMac SMP probe found %d cpus\n", ncpus); + + /* Nothing more to do if less than 2 of them */ + if (ncpus <= 1) + return; + + /* We need to perform some early initialisations before we can start + * setting up SMP as we are running before initcalls + */ + pmac_pfunc_base_install(); + pmac_i2c_init(); + + /* Setup various bits like timebase sync method, ability to nap, ... */ + smp_core99_setup(ncpus); + + /* Install IPIs */ + mpic_request_ipis(); + + /* Collect l2cr and l3cr values from CPU 0 */ + core99_init_caches(0); +} + +static int smp_core99_kick_cpu(int nr) +{ + unsigned int save_vector; + unsigned long target, flags; + unsigned int *vector = (unsigned int *)(PAGE_OFFSET+0x100); + + if (nr < 0 || nr > 3) + return -ENOENT; + + if (ppc_md.progress) + ppc_md.progress("smp_core99_kick_cpu", 0x346); + + local_irq_save(flags); + + /* Save reset vector */ + save_vector = *vector; + + /* Setup fake reset vector that does + * b __secondary_start_pmac_0 + nr*8 + */ + target = (unsigned long) __secondary_start_pmac_0 + nr * 8; + patch_branch((struct ppc_inst *)vector, target, BRANCH_SET_LINK); + + /* Put some life in our friend */ + pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0); + + /* FIXME: We wait a bit for the CPU to take the exception, I should + * instead wait for the entry code to set something for me. Well, + * ideally, all that crap will be done in prom.c and the CPU left + * in a RAM-based wait loop like CHRP. + */ + mdelay(1); + + /* Restore our exception vector */ + patch_instruction((struct ppc_inst *)vector, ppc_inst(save_vector)); + + local_irq_restore(flags); + if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347); + + return 0; +} + +static void smp_core99_setup_cpu(int cpu_nr) +{ + /* Setup L2/L3 */ + if (cpu_nr != 0) + core99_init_caches(cpu_nr); + + /* Setup openpic */ + mpic_setup_this_cpu(); +} + +#ifdef CONFIG_PPC64 +#ifdef CONFIG_HOTPLUG_CPU +static unsigned int smp_core99_host_open; + +static int smp_core99_cpu_prepare(unsigned int cpu) +{ + int rc; + + /* Open i2c bus if it was used for tb sync */ + if (pmac_tb_clock_chip_host && !smp_core99_host_open) { + rc = pmac_i2c_open(pmac_tb_clock_chip_host, 1); + if (rc) { + pr_err("Failed to open i2c bus for time sync\n"); + return notifier_from_errno(rc); + } + smp_core99_host_open = 1; + } + return 0; +} + +static int smp_core99_cpu_online(unsigned int cpu) +{ + /* Close i2c bus if it was used for tb sync */ + if (pmac_tb_clock_chip_host && smp_core99_host_open) { + pmac_i2c_close(pmac_tb_clock_chip_host); + smp_core99_host_open = 0; + } + return 0; +} +#endif /* CONFIG_HOTPLUG_CPU */ + +static void __init smp_core99_bringup_done(void) +{ + extern void g5_phy_disable_cpu1(void); + + /* Close i2c bus if it was used for tb sync */ + if (pmac_tb_clock_chip_host) + pmac_i2c_close(pmac_tb_clock_chip_host); + + /* If we didn't start the second CPU, we must take + * it off the bus. + */ + if (of_machine_is_compatible("MacRISC4") && + num_online_cpus() < 2) { + set_cpu_present(1, false); + g5_phy_disable_cpu1(); + } +#ifdef CONFIG_HOTPLUG_CPU + cpuhp_setup_state_nocalls(CPUHP_POWERPC_PMAC_PREPARE, + "powerpc/pmac:prepare", smp_core99_cpu_prepare, + NULL); + cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN, "powerpc/pmac:online", + smp_core99_cpu_online, NULL); +#endif + + if (ppc_md.progress) + ppc_md.progress("smp_core99_bringup_done", 0x349); +} +#endif /* CONFIG_PPC64 */ + +#ifdef CONFIG_HOTPLUG_CPU + +static int smp_core99_cpu_disable(void) +{ + int rc = generic_cpu_disable(); + if (rc) + return rc; + + mpic_cpu_set_priority(0xf); + + cleanup_cpu_mmu_context(); + + return 0; +} + +#ifdef CONFIG_PPC32 + +static void pmac_cpu_offline_self(void) +{ + int cpu = smp_processor_id(); + + local_irq_disable(); + idle_task_exit(); + pr_debug("CPU%d offline\n", cpu); + generic_set_cpu_dead(cpu); + smp_wmb(); + mb(); + low_cpu_offline_self(); +} + +#else /* CONFIG_PPC32 */ + +static void pmac_cpu_offline_self(void) +{ + int cpu = smp_processor_id(); + + local_irq_disable(); + idle_task_exit(); + + /* + * turn off as much as possible, we'll be + * kicked out as this will only be invoked + * on core99 platforms for now ... + */ + + printk(KERN_INFO "CPU#%d offline\n", cpu); + generic_set_cpu_dead(cpu); + smp_wmb(); + + /* + * Re-enable interrupts. The NAP code needs to enable them + * anyways, do it now so we deal with the case where one already + * happened while soft-disabled. + * We shouldn't get any external interrupts, only decrementer, and the + * decrementer handler is safe for use on offline CPUs + */ + local_irq_enable(); + + while (1) { + /* let's not take timer interrupts too often ... */ + set_dec(0x7fffffff); + + /* Enter NAP mode */ + power4_idle(); + } +} + +#endif /* else CONFIG_PPC32 */ +#endif /* CONFIG_HOTPLUG_CPU */ + +/* Core99 Macs (dual G4s and G5s) */ +static struct smp_ops_t core99_smp_ops = { + .message_pass = smp_mpic_message_pass, + .probe = smp_core99_probe, +#ifdef CONFIG_PPC64 + .bringup_done = smp_core99_bringup_done, +#endif + .kick_cpu = smp_core99_kick_cpu, + .setup_cpu = smp_core99_setup_cpu, + .give_timebase = smp_core99_give_timebase, + .take_timebase = smp_core99_take_timebase, +#if defined(CONFIG_HOTPLUG_CPU) + .cpu_disable = smp_core99_cpu_disable, + .cpu_die = generic_cpu_die, +#endif +}; + +void __init pmac_setup_smp(void) +{ + struct device_node *np; + + /* Check for Core99 */ + np = of_find_node_by_name(NULL, "uni-n"); + if (!np) + np = of_find_node_by_name(NULL, "u3"); + if (!np) + np = of_find_node_by_name(NULL, "u4"); + if (np) { + of_node_put(np); + smp_ops = &core99_smp_ops; + } +#ifdef CONFIG_PPC_PMAC32_PSURGE + else { + /* We have to set bits in cpu_possible_mask here since the + * secondary CPU(s) aren't in the device tree. Various + * things won't be initialized for CPUs not in the possible + * map, so we really need to fix it up here. + */ + int cpu; + + for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu) + set_cpu_possible(cpu, true); + smp_ops = &psurge_smp_ops; + } +#endif /* CONFIG_PPC_PMAC32_PSURGE */ + +#ifdef CONFIG_HOTPLUG_CPU + smp_ops->cpu_offline_self = pmac_cpu_offline_self; +#endif +} + + diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c new file mode 100644 index 000000000..31d6213a6 --- /dev/null +++ b/arch/powerpc/platforms/powermac/time.c @@ -0,0 +1,243 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Support for periodic interrupts (100 per second) and for getting + * the current time from the RTC on Power Macintoshes. + * + * We use the decrementer register for our periodic interrupts. + * + * Paul Mackerras August 1996. + * Copyright (C) 1996 Paul Mackerras. + * Copyright (C) 2003-2005 Benjamin Herrenschmidt. + * + */ +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/time.h> +#include <linux/adb.h> +#include <linux/cuda.h> +#include <linux/pmu.h> +#include <linux/interrupt.h> +#include <linux/hardirq.h> +#include <linux/rtc.h> + +#include <asm/sections.h> +#include <asm/prom.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/time.h> +#include <asm/nvram.h> +#include <asm/smu.h> + +#include "pmac.h" + +#undef DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +/* + * Calibrate the decrementer frequency with the VIA timer 1. + */ +#define VIA_TIMER_FREQ_6 4700000 /* time 1 frequency * 6 */ + +/* VIA registers */ +#define RS 0x200 /* skip between registers */ +#define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */ +#define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */ +#define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */ +#define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */ +#define ACR (11*RS) /* Auxiliary control register */ +#define IFR (13*RS) /* Interrupt flag register */ + +/* Bits in ACR */ +#define T1MODE 0xc0 /* Timer 1 mode */ +#define T1MODE_CONT 0x40 /* continuous interrupts */ + +/* Bits in IFR and IER */ +#define T1_INT 0x40 /* Timer 1 interrupt */ + +long __init pmac_time_init(void) +{ + s32 delta = 0; +#if defined(CONFIG_NVRAM) && defined(CONFIG_PPC32) + int dst; + + delta = ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x9)) << 16; + delta |= ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xa)) << 8; + delta |= pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xb); + if (delta & 0x00800000UL) + delta |= 0xFF000000UL; + dst = ((pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x8) & 0x80) != 0); + printk("GMT Delta read from XPRAM: %d minutes, DST: %s\n", delta/60, + dst ? "on" : "off"); +#endif + return delta; +} + +#ifdef CONFIG_PMAC_SMU +static time64_t smu_get_time(void) +{ + struct rtc_time tm; + + if (smu_get_rtc_time(&tm, 1)) + return 0; + return rtc_tm_to_time64(&tm); +} +#endif + +/* Can't be __init, it's called when suspending and resuming */ +time64_t pmac_get_boot_time(void) +{ + /* Get the time from the RTC, used only at boot time */ + switch (sys_ctrler) { +#ifdef CONFIG_ADB_CUDA + case SYS_CTRLER_CUDA: + return cuda_get_time(); +#endif +#ifdef CONFIG_ADB_PMU + case SYS_CTRLER_PMU: + return pmu_get_time(); +#endif +#ifdef CONFIG_PMAC_SMU + case SYS_CTRLER_SMU: + return smu_get_time(); +#endif + default: + return 0; + } +} + +void pmac_get_rtc_time(struct rtc_time *tm) +{ + /* Get the time from the RTC, used only at boot time */ + switch (sys_ctrler) { +#ifdef CONFIG_ADB_CUDA + case SYS_CTRLER_CUDA: + rtc_time64_to_tm(cuda_get_time(), tm); + break; +#endif +#ifdef CONFIG_ADB_PMU + case SYS_CTRLER_PMU: + rtc_time64_to_tm(pmu_get_time(), tm); + break; +#endif +#ifdef CONFIG_PMAC_SMU + case SYS_CTRLER_SMU: + smu_get_rtc_time(tm, 1); + break; +#endif + default: + ; + } +} + +int pmac_set_rtc_time(struct rtc_time *tm) +{ + switch (sys_ctrler) { +#ifdef CONFIG_ADB_CUDA + case SYS_CTRLER_CUDA: + return cuda_set_rtc_time(tm); +#endif +#ifdef CONFIG_ADB_PMU + case SYS_CTRLER_PMU: + return pmu_set_rtc_time(tm); +#endif +#ifdef CONFIG_PMAC_SMU + case SYS_CTRLER_SMU: + return smu_set_rtc_time(tm, 1); +#endif + default: + return -ENODEV; + } +} + +#ifdef CONFIG_PPC32 +/* + * Calibrate the decrementer register using VIA timer 1. + * This is used both on powermacs and CHRP machines. + */ +static int __init via_calibrate_decr(void) +{ + struct device_node *vias; + volatile unsigned char __iomem *via; + int count = VIA_TIMER_FREQ_6 / 100; + unsigned int dstart, dend; + struct resource rsrc; + + vias = of_find_node_by_name(NULL, "via-cuda"); + if (vias == NULL) + vias = of_find_node_by_name(NULL, "via-pmu"); + if (vias == NULL) + vias = of_find_node_by_name(NULL, "via"); + if (vias == NULL || of_address_to_resource(vias, 0, &rsrc)) { + of_node_put(vias); + return 0; + } + of_node_put(vias); + via = ioremap(rsrc.start, resource_size(&rsrc)); + if (via == NULL) { + printk(KERN_ERR "Failed to map VIA for timer calibration !\n"); + return 0; + } + + /* set timer 1 for continuous interrupts */ + out_8(&via[ACR], (via[ACR] & ~T1MODE) | T1MODE_CONT); + /* set the counter to a small value */ + out_8(&via[T1CH], 2); + /* set the latch to `count' */ + out_8(&via[T1LL], count); + out_8(&via[T1LH], count >> 8); + /* wait until it hits 0 */ + while ((in_8(&via[IFR]) & T1_INT) == 0) + ; + dstart = get_dec(); + /* clear the interrupt & wait until it hits 0 again */ + in_8(&via[T1CL]); + while ((in_8(&via[IFR]) & T1_INT) == 0) + ; + dend = get_dec(); + + ppc_tb_freq = (dstart - dend) * 100 / 6; + + iounmap(via); + + return 1; +} +#endif + +/* + * Query the OF and get the decr frequency. + */ +void __init pmac_calibrate_decr(void) +{ + generic_calibrate_decr(); + +#ifdef CONFIG_PPC32 + /* We assume MacRISC2 machines have correct device-tree + * calibration. That's better since the VIA itself seems + * to be slightly off. --BenH + */ + if (!of_machine_is_compatible("MacRISC2") && + !of_machine_is_compatible("MacRISC3") && + !of_machine_is_compatible("MacRISC4")) + if (via_calibrate_decr()) + return; + + /* Special case: QuickSilver G4s seem to have a badly calibrated + * timebase-frequency in OF, VIA is much better on these. We should + * probably implement calibration based on the KL timer on these + * machines anyway... -BenH + */ + if (of_machine_is_compatible("PowerMac3,5")) + if (via_calibrate_decr()) + return; +#endif +} diff --git a/arch/powerpc/platforms/powermac/udbg_adb.c b/arch/powerpc/platforms/powermac/udbg_adb.c new file mode 100644 index 000000000..12158bb4f --- /dev/null +++ b/arch/powerpc/platforms/powermac/udbg_adb.c @@ -0,0 +1,220 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/bitops.h> +#include <linux/ptrace.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <linux/cuda.h> +#include <asm/machdep.h> +#include <asm/io.h> +#include <asm/page.h> +#include <asm/xmon.h> +#include <asm/prom.h> +#include <asm/bootx.h> +#include <asm/errno.h> +#include <asm/pmac_feature.h> +#include <asm/processor.h> +#include <asm/delay.h> +#include <asm/btext.h> +#include <asm/time.h> +#include <asm/udbg.h> + +/* + * This implementation is "special", it can "patch" the current + * udbg implementation and work on top of it. It must thus be + * initialized last + */ + +static void (*udbg_adb_old_putc)(char c); +static int (*udbg_adb_old_getc)(void); +static int (*udbg_adb_old_getc_poll)(void); + +static enum { + input_adb_none, + input_adb_pmu, + input_adb_cuda, +} input_type = input_adb_none; + +int xmon_wants_key, xmon_adb_keycode; + +static inline void udbg_adb_poll(void) +{ +#ifdef CONFIG_ADB_PMU + if (input_type == input_adb_pmu) + pmu_poll_adb(); +#endif /* CONFIG_ADB_PMU */ +#ifdef CONFIG_ADB_CUDA + if (input_type == input_adb_cuda) + cuda_poll(); +#endif /* CONFIG_ADB_CUDA */ +} + +#ifdef CONFIG_BOOTX_TEXT + +static int udbg_adb_use_btext; +static int xmon_adb_shiftstate; + +static unsigned char xmon_keytab[128] = + "asdfhgzxcv\000bqwer" /* 0x00 - 0x0f */ + "yt123465=97-80]o" /* 0x10 - 0x1f */ + "u[ip\rlj'k;\\,/nm." /* 0x20 - 0x2f */ + "\t `\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */ + "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */ + "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */ + +static unsigned char xmon_shift_keytab[128] = + "ASDFHGZXCV\000BQWER" /* 0x00 - 0x0f */ + "YT!@#$^%+(&_*)}O" /* 0x10 - 0x1f */ + "U{IP\rLJ\"K:|<?NM>" /* 0x20 - 0x2f */ + "\t ~\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */ + "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */ + "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */ + +static int udbg_adb_local_getc(void) +{ + int k, t, on; + + xmon_wants_key = 1; + for (;;) { + xmon_adb_keycode = -1; + t = 0; + on = 0; + k = -1; + do { + if (--t < 0) { + on = 1 - on; + btext_drawchar(on? 0xdb: 0x20); + btext_drawchar('\b'); + t = 200000; + } + udbg_adb_poll(); + if (udbg_adb_old_getc_poll) + k = udbg_adb_old_getc_poll(); + } while (k == -1 && xmon_adb_keycode == -1); + if (on) + btext_drawstring(" \b"); + if (k != -1) + return k; + k = xmon_adb_keycode; + + /* test for shift keys */ + if ((k & 0x7f) == 0x38 || (k & 0x7f) == 0x7b) { + xmon_adb_shiftstate = (k & 0x80) == 0; + continue; + } + if (k >= 0x80) + continue; /* ignore up transitions */ + k = (xmon_adb_shiftstate? xmon_shift_keytab: xmon_keytab)[k]; + if (k != 0) + break; + } + xmon_wants_key = 0; + return k; +} +#endif /* CONFIG_BOOTX_TEXT */ + +static int udbg_adb_getc(void) +{ +#ifdef CONFIG_BOOTX_TEXT + if (udbg_adb_use_btext && input_type != input_adb_none) + return udbg_adb_local_getc(); +#endif + if (udbg_adb_old_getc) + return udbg_adb_old_getc(); + return -1; +} + +/* getc_poll() is not really used, unless you have the xmon-over modem + * hack that doesn't quite concern us here, thus we just poll the low level + * ADB driver to prevent it from timing out and call back the original poll + * routine. + */ +static int udbg_adb_getc_poll(void) +{ + udbg_adb_poll(); + + if (udbg_adb_old_getc_poll) + return udbg_adb_old_getc_poll(); + return -1; +} + +static void udbg_adb_putc(char c) +{ +#ifdef CONFIG_BOOTX_TEXT + if (udbg_adb_use_btext) + btext_drawchar(c); +#endif + if (udbg_adb_old_putc) + return udbg_adb_old_putc(c); +} + +void __init udbg_adb_init_early(void) +{ +#ifdef CONFIG_BOOTX_TEXT + if (btext_find_display(1) == 0) { + udbg_adb_use_btext = 1; + udbg_putc = udbg_adb_putc; + } +#endif +} + +int __init udbg_adb_init(int force_btext) +{ + struct device_node *np; + + /* Capture existing callbacks */ + udbg_adb_old_putc = udbg_putc; + udbg_adb_old_getc = udbg_getc; + udbg_adb_old_getc_poll = udbg_getc_poll; + + /* Check if our early init was already called */ + if (udbg_adb_old_putc == udbg_adb_putc) + udbg_adb_old_putc = NULL; +#ifdef CONFIG_BOOTX_TEXT + if (udbg_adb_old_putc == btext_drawchar) + udbg_adb_old_putc = NULL; +#endif + + /* Set ours as output */ + udbg_putc = udbg_adb_putc; + udbg_getc = udbg_adb_getc; + udbg_getc_poll = udbg_adb_getc_poll; + +#ifdef CONFIG_BOOTX_TEXT + /* Check if we should use btext output */ + if (btext_find_display(force_btext) == 0) + udbg_adb_use_btext = 1; +#endif + + /* See if there is a keyboard in the device tree with a parent + * of type "adb". If not, we return a failure, but we keep the + * bext output set for now + */ + for_each_node_by_name(np, "keyboard") { + struct device_node *parent = of_get_parent(np); + int found = of_node_is_type(parent, "adb"); + of_node_put(parent); + if (found) + break; + } + if (np == NULL) + return -ENODEV; + of_node_put(np); + +#ifdef CONFIG_ADB_PMU + if (find_via_pmu()) + input_type = input_adb_pmu; +#endif +#ifdef CONFIG_ADB_CUDA + if (find_via_cuda()) + input_type = input_adb_cuda; +#endif + + /* Same as above: nothing found, keep btext set for output */ + if (input_type == input_adb_none) + return -ENODEV; + + return 0; +} diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c new file mode 100644 index 000000000..f286bdfe8 --- /dev/null +++ b/arch/powerpc/platforms/powermac/udbg_scc.c @@ -0,0 +1,180 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * udbg for zilog scc ports as found on Apple PowerMacs + * + * Copyright (C) 2001-2005 PPC 64 Team, IBM Corp + */ +#include <linux/types.h> +#include <asm/udbg.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/pmac_feature.h> + +extern u8 real_readb(volatile u8 __iomem *addr); +extern void real_writeb(u8 data, volatile u8 __iomem *addr); + +#define SCC_TXRDY 4 +#define SCC_RXRDY 1 + +static volatile u8 __iomem *sccc; +static volatile u8 __iomem *sccd; + +static void udbg_scc_putc(char c) +{ + if (sccc) { + while ((in_8(sccc) & SCC_TXRDY) == 0) + ; + out_8(sccd, c); + if (c == '\n') + udbg_scc_putc('\r'); + } +} + +static int udbg_scc_getc_poll(void) +{ + if (sccc) { + if ((in_8(sccc) & SCC_RXRDY) != 0) + return in_8(sccd); + else + return -1; + } + return -1; +} + +static int udbg_scc_getc(void) +{ + if (sccc) { + while ((in_8(sccc) & SCC_RXRDY) == 0) + ; + return in_8(sccd); + } + return -1; +} + +static unsigned char scc_inittab[] = { + 13, 0, /* set baud rate divisor */ + 12, 0, + 14, 1, /* baud rate gen enable, src=rtxc */ + 11, 0x50, /* clocks = br gen */ + 5, 0xea, /* tx 8 bits, assert DTR & RTS */ + 4, 0x46, /* x16 clock, 1 stop */ + 3, 0xc1, /* rx enable, 8 bits */ +}; + +void udbg_scc_init(int force_scc) +{ + const u32 *reg; + unsigned long addr; + struct device_node *stdout = NULL, *escc = NULL, *macio = NULL; + struct device_node *ch, *ch_def = NULL, *ch_a = NULL; + const char *path; + int i; + + escc = of_find_node_by_name(NULL, "escc"); + if (escc == NULL) + goto bail; + macio = of_get_parent(escc); + if (macio == NULL) + goto bail; + path = of_get_property(of_chosen, "linux,stdout-path", NULL); + if (path != NULL) + stdout = of_find_node_by_path(path); + for_each_child_of_node(escc, ch) { + if (ch == stdout) + ch_def = of_node_get(ch); + if (of_node_name_eq(ch, "ch-a")) + ch_a = of_node_get(ch); + } + if (ch_def == NULL && !force_scc) + goto bail; + + ch = ch_def ? ch_def : ch_a; + + /* Get address within mac-io ASIC */ + reg = of_get_property(escc, "reg", NULL); + if (reg == NULL) + goto bail; + addr = reg[0]; + + /* Get address of mac-io PCI itself */ + reg = of_get_property(macio, "assigned-addresses", NULL); + if (reg == NULL) + goto bail; + addr += reg[2]; + + /* Lock the serial port */ + pmac_call_feature(PMAC_FTR_SCC_ENABLE, ch, + PMAC_SCC_ASYNC | PMAC_SCC_FLAG_XMON, 1); + + if (ch == ch_a) + addr += 0x20; + sccc = ioremap(addr & PAGE_MASK, PAGE_SIZE) ; + sccc += addr & ~PAGE_MASK; + sccd = sccc + 0x10; + + mb(); + + for (i = 20000; i != 0; --i) + in_8(sccc); + out_8(sccc, 0x09); /* reset A or B side */ + out_8(sccc, 0xc0); + + /* If SCC was the OF output port, read the BRG value, else + * Setup for 38400 or 57600 8N1 depending on the machine + */ + if (ch_def != NULL) { + out_8(sccc, 13); + scc_inittab[1] = in_8(sccc); + out_8(sccc, 12); + scc_inittab[3] = in_8(sccc); + } else if (of_machine_is_compatible("RackMac1,1") + || of_machine_is_compatible("RackMac1,2") + || of_machine_is_compatible("MacRISC4")) { + /* Xserves and G5s default to 57600 */ + scc_inittab[1] = 0; + scc_inittab[3] = 0; + } else { + /* Others default to 38400 */ + scc_inittab[1] = 0; + scc_inittab[3] = 1; + } + + for (i = 0; i < sizeof(scc_inittab); ++i) + out_8(sccc, scc_inittab[i]); + + + udbg_putc = udbg_scc_putc; + udbg_getc = udbg_scc_getc; + udbg_getc_poll = udbg_scc_getc_poll; + + udbg_puts("Hello World !\n"); + + bail: + of_node_put(macio); + of_node_put(escc); + of_node_put(stdout); + of_node_put(ch_def); + of_node_put(ch_a); +} + +#ifdef CONFIG_PPC64 +static void udbg_real_scc_putc(char c) +{ + while ((real_readb(sccc) & SCC_TXRDY) == 0) + ; + real_writeb(c, sccd); + if (c == '\n') + udbg_real_scc_putc('\r'); +} + +void __init udbg_init_pmac_realmode(void) +{ + sccc = (volatile u8 __iomem *)0x80013020ul; + sccd = (volatile u8 __iomem *)0x80013030ul; + + udbg_putc = udbg_real_scc_putc; + udbg_getc = NULL; + udbg_getc_poll = NULL; +} +#endif /* CONFIG_PPC64 */ |