summaryrefslogtreecommitdiffstats
path: root/debian/patches/features/arm64/arm64-dts-rockchip-Add-basic-support-for-Kobol-s-Hel.patch
diff options
context:
space:
mode:
Diffstat (limited to 'debian/patches/features/arm64/arm64-dts-rockchip-Add-basic-support-for-Kobol-s-Hel.patch')
-rw-r--r--debian/patches/features/arm64/arm64-dts-rockchip-Add-basic-support-for-Kobol-s-Hel.patch419
1 files changed, 419 insertions, 0 deletions
diff --git a/debian/patches/features/arm64/arm64-dts-rockchip-Add-basic-support-for-Kobol-s-Hel.patch b/debian/patches/features/arm64/arm64-dts-rockchip-Add-basic-support-for-Kobol-s-Hel.patch
new file mode 100644
index 000000000..deeed7034
--- /dev/null
+++ b/debian/patches/features/arm64/arm64-dts-rockchip-Add-basic-support-for-Kobol-s-Hel.patch
@@ -0,0 +1,419 @@
+From: Uwe Kleine-König <uwe@kleine-koenig.org>
+Date: Wed, 14 Oct 2020 22:00:30 +0200
+Subject: arm64: dts: rockchip: Add basic support for Kobol's Helios64
+Origin: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/patch/?id=09e006cfb43e8ec38afe28278b210dab72e6cac8
+
+The hardware is described in detail on Kobol's wiki at
+https://wiki.kobol.io/helios64/intro/.
+
+Up to now the following peripherals are working:
+
+ - UART
+ - Micro-SD card
+ - eMMC
+ - ethernet port 1
+ - status LED
+ - temperature sensor on i2c bus 2
+
+Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
+Link: https://lore.kernel.org/r/20201014200030.845759-3-uwe@kleine-koenig.org
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/Makefile | 1 +
+ .../dts/rockchip/rk3399-kobol-helios64.dts | 372 ++++++++++++++++++
+ 2 files changed, 373 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
+
+diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
+index 26661c7b736b..28b26a874313 100644
+--- a/arch/arm64/boot/dts/rockchip/Makefile
++++ b/arch/arm64/boot/dts/rockchip/Makefile
+@@ -26,6 +26,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-hugsun-x99.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-captain.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-v.dtb
++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-kobol-helios64.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-leez-p710.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb
+diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
+new file mode 100644
+index 000000000000..2a561be724b2
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
+@@ -0,0 +1,372 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright (c) 2020 Aditya Prayoga <aditya@kobol.io>
++ */
++
++/*
++ * The Kobol Helios64 is a board designed to operate as a NAS and optionally
++ * ships with an enclosing that can host five 2.5" hard disks.
++ *
++ * See https://wiki.kobol.io/helios64/intro/ for further details.
++ */
++
++/dts-v1/;
++#include "rk3399.dtsi"
++#include "rk3399-opp.dtsi"
++
++/ {
++ model = "Kobol Helios64";
++ compatible = "kobol,helios64", "rockchip,rk3399";
++
++ avdd_1v8_s0: avdd-1v8-s0 {
++ compatible = "regulator-fixed";
++ regulator-name = "avdd_1v8_s0";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ vin-supply = <&vcc3v3_sys_s3>;
++ };
++
++ clkin_gmac: external-gmac-clock {
++ compatible = "fixed-clock";
++ clock-frequency = <125000000>;
++ clock-output-names = "clkin_gmac";
++ #clock-cells = <0>;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++ pinctrl-names = "default";
++ pinctrl-0 = <&sys_grn_led_on &sys_red_led_on>;
++
++ led-0 {
++ label = "helios64:green:status";
++ gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
++ default-state = "on";
++ };
++
++ led-1 {
++ label = "helios64:red:fault";
++ gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
++ default-state = "keep";
++ };
++ };
++
++ vcc1v8_sys_s0: vcc1v8-sys-s0 {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc1v8_sys_s0";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ vin-supply = <&vcc1v8_sys_s3>;
++ };
++
++ vcc3v0_sd: vcc3v0-sd {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
++ regulator-name = "vcc3v0_sd";
++ regulator-boot-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdmmc0_pwr_h>;
++ vin-supply = <&vcc3v3_sys_s3>;
++ };
++
++ vcc3v3_sys_s3: vcc_lan: vcc3v3-sys-s3 {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc3v3_sys_s3";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <&vcc5v0_sys>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ };
++ };
++
++ vcc5v0_sys: vcc5v0-sys {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc5v0_sys";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc12v_dcin_bkup>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ };
++ };
++
++ vcc12v_dcin: vcc12v-dcin {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc12v_dcin";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <12000000>;
++ regulator-max-microvolt = <12000000>;
++ };
++
++ vcc12v_dcin_bkup: vcc12v-dcin-bkup {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc12v_dcin_bkup";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <12000000>;
++ regulator-max-microvolt = <12000000>;
++ vin-supply = <&vcc12v_dcin>;
++ };
++};
++
++/*
++ * The system doesn't run stable with cpu freq enabled, so disallow the lower
++ * frequencies until this problem is properly understood and resolved.
++ */
++&cluster0_opp {
++ /delete-node/ opp00;
++ /delete-node/ opp01;
++ /delete-node/ opp02;
++ /delete-node/ opp03;
++ /delete-node/ opp04;
++};
++
++&cluster1_opp {
++ /delete-node/ opp00;
++ /delete-node/ opp01;
++ /delete-node/ opp02;
++ /delete-node/ opp03;
++ /delete-node/ opp04;
++ /delete-node/ opp05;
++ /delete-node/ opp06;
++};
++
++&cpu_b0 {
++ cpu-supply = <&vdd_cpu_b>;
++};
++
++&cpu_b1 {
++ cpu-supply = <&vdd_cpu_b>;
++};
++
++&cpu_l0 {
++ cpu-supply = <&vdd_cpu_l>;
++};
++
++&cpu_l1 {
++ cpu-supply = <&vdd_cpu_l>;
++};
++
++&cpu_l2 {
++ cpu-supply = <&vdd_cpu_l>;
++};
++
++&cpu_l3 {
++ cpu-supply = <&vdd_cpu_l>;
++};
++
++&emmc_phy {
++ status = "okay";
++};
++
++&gmac {
++ assigned-clock-parents = <&clkin_gmac>;
++ assigned-clocks = <&cru SCLK_RMII_SRC>;
++ clock_in_out = "input";
++ phy-mode = "rgmii";
++ phy-supply = <&vcc_lan>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&rgmii_pins &gphy_reset>;
++ rx_delay = <0x20>;
++ tx_delay = <0x28>;
++ snps,reset-active-low;
++ snps,reset-delays-us = <0 10000 50000>;
++ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
++ status = "okay";
++};
++
++&i2c0 {
++ clock-frequency = <400000>;
++ i2c-scl-rising-time-ns = <168>;
++ i2c-scl-falling-time-ns = <4>;
++ status = "okay";
++
++ rk808: pmic@1b {
++ compatible = "rockchip,rk808";
++ reg = <0x1b>;
++ interrupt-parent = <&gpio0>;
++ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
++ clock-output-names = "xin32k", "rk808-clkout2";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pmic_int_l>;
++ vcc1-supply = <&vcc5v0_sys>;
++ vcc2-supply = <&vcc5v0_sys>;
++ vcc3-supply = <&vcc5v0_sys>;
++ vcc4-supply = <&vcc5v0_sys>;
++ vcc6-supply = <&vcc5v0_sys>;
++ vcc7-supply = <&vcc5v0_sys>;
++ vcc8-supply = <&vcc3v3_sys_s3>;
++ vcc9-supply = <&vcc5v0_sys>;
++ vcc10-supply = <&vcc5v0_sys>;
++ vcc11-supply = <&vcc5v0_sys>;
++ vcc12-supply = <&vcc3v3_sys_s3>;
++ vddio-supply = <&vcc3v0_s3>;
++ wakeup-source;
++ #clock-cells = <1>;
++
++ regulators {
++ vdd_cpu_l: DCDC_REG2 {
++ regulator-name = "vdd_cpu_l";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <750000>;
++ regulator-max-microvolt = <1350000>;
++ regulator-ramp-delay = <6001>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc1v8_sys_s3: DCDC_REG4 {
++ regulator-name = "vcc1v8_sys_s3";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <1800000>;
++ };
++ };
++
++ vcc_sdio_s0: LDO_REG4 {
++ regulator-name = "vcc_sdio_s0";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3000000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <3000000>;
++ };
++ };
++
++ vcc3v0_s3: LDO_REG8 {
++ regulator-name = "vcc3v0_s3";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <3000000>;
++ };
++ };
++ };
++ };
++
++ vdd_cpu_b: regulator@40 {
++ compatible = "silergy,syr827";
++ reg = <0x40>;
++ fcs,suspend-voltage-selector = <1>;
++ regulator-name = "vdd_cpu_b";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <712500>;
++ regulator-max-microvolt = <1500000>;
++ regulator-ramp-delay = <1000>;
++ vin-supply = <&vcc5v0_sys>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++};
++
++&i2c2 {
++ clock-frequency = <400000>;
++ i2c-scl-rising-time-ns = <160>;
++ i2c-scl-falling-time-ns = <30>;
++ status = "okay";
++
++ temp@4c {
++ compatible = "national,lm75";
++ reg = <0x4c>;
++ };
++};
++
++&io_domains {
++ audio-supply = <&vcc1v8_sys_s0>;
++ bt656-supply = <&vcc1v8_sys_s0>;
++ gpio1830-supply = <&vcc3v0_s3>;
++ sdmmc-supply = <&vcc_sdio_s0>;
++ status = "okay";
++};
++
++&pinctrl {
++ gmac {
++ gphy_reset: gphy-reset {
++ rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>;
++ };
++ };
++
++ leds {
++ sys_grn_led_on: sys-grn-led-on {
++ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
++ };
++
++ sys_red_led_on: sys-red-led-on {
++ rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
++ };
++ };
++
++ pmic {
++ pmic_int_l: pmic-int-l {
++ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++
++ vcc3v0-sd {
++ sdmmc0_pwr_h: sdmmc0-pwr-h {
++ rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++};
++
++&pmu_io_domains {
++ pmu1830-supply = <&vcc3v0_s3>;
++ status = "okay";
++};
++
++&sdhci {
++ bus-width = <8>;
++ mmc-hs200-1_8v;
++ non-removable;
++ vqmmc-supply = <&vcc1v8_sys_s0>;
++ status = "okay";
++};
++
++&sdmmc {
++ bus-width = <4>;
++ cap-sd-highspeed;
++ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
++ disable-wp;
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
++ vmmc-supply = <&vcc3v0_sd>;
++ vqmmc-supply = <&vcc_sdio_s0>;
++ status = "okay";
++};
++
++&uart2 {
++ status = "okay";
++};
+--
+2.28.0
+
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 06:23:26 +0000