1 files changed, 308 insertions, 0 deletions
diff --git a/drivers/acpi/pmic/intel_pmic_xpower.c b/drivers/acpi/pmic/intel_pmic_xpower.c
new file mode 100644
index 000000000..a091d5a83
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic_xpower.c
@@ -0,0 +1,308 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * XPower AXP288 PMIC operation region driver
+ *
+ * Copyright (C) 2014 Intel Corporation. All rights reserved.
+ */
+
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include <asm/iosf_mbi.h>
+#include "intel_pmic.h"
+
+#define XPOWER_GPADC_LOW	0x5b
+#define XPOWER_GPI1_CTRL	0x92
+
+#define GPI1_LDO_MASK		GENMASK(2, 0)
+#define GPI1_LDO_ON		(3 << 0)
+#define GPI1_LDO_OFF		(4 << 0)
+
+#define AXP288_ADC_TS_CURRENT_ON_OFF_MASK		GENMASK(1, 0)
+#define AXP288_ADC_TS_CURRENT_OFF			(0 << 0)
+#define AXP288_ADC_TS_CURRENT_ON_WHEN_CHARGING		(1 << 0)
+#define AXP288_ADC_TS_CURRENT_ON_ONDEMAND		(2 << 0)
+#define AXP288_ADC_TS_CURRENT_ON			(3 << 0)
+
+static struct pmic_table power_table[] = {
+	{
+		.address = 0x00,
+		.reg = 0x13,
+		.bit = 0x05,
+	}, /* ALD1 */
+	{
+		.address = 0x04,
+		.reg = 0x13,
+		.bit = 0x06,
+	}, /* ALD2 */
+	{
+		.address = 0x08,
+		.reg = 0x13,
+		.bit = 0x07,
+	}, /* ALD3 */
+	{
+		.address = 0x0c,
+		.reg = 0x12,
+		.bit = 0x03,
+	}, /* DLD1 */
+	{
+		.address = 0x10,
+		.reg = 0x12,
+		.bit = 0x04,
+	}, /* DLD2 */
+	{
+		.address = 0x14,
+		.reg = 0x12,
+		.bit = 0x05,
+	}, /* DLD3 */
+	{
+		.address = 0x18,
+		.reg = 0x12,
+		.bit = 0x06,
+	}, /* DLD4 */
+	{
+		.address = 0x1c,
+		.reg = 0x12,
+		.bit = 0x00,
+	}, /* ELD1 */
+	{
+		.address = 0x20,
+		.reg = 0x12,
+		.bit = 0x01,
+	}, /* ELD2 */
+	{
+		.address = 0x24,
+		.reg = 0x12,
+		.bit = 0x02,
+	}, /* ELD3 */
+	{
+		.address = 0x28,
+		.reg = 0x13,
+		.bit = 0x02,
+	}, /* FLD1 */
+	{
+		.address = 0x2c,
+		.reg = 0x13,
+		.bit = 0x03,
+	}, /* FLD2 */
+	{
+		.address = 0x30,
+		.reg = 0x13,
+		.bit = 0x04,
+	}, /* FLD3 */
+	{
+		.address = 0x34,
+		.reg = 0x10,
+		.bit = 0x03,
+	}, /* BUC1 */
+	{
+		.address = 0x38,
+		.reg = 0x10,
+		.bit = 0x06,
+	}, /* BUC2 */
+	{
+		.address = 0x3c,
+		.reg = 0x10,
+		.bit = 0x05,
+	}, /* BUC3 */
+	{
+		.address = 0x40,
+		.reg = 0x10,
+		.bit = 0x04,
+	}, /* BUC4 */
+	{
+		.address = 0x44,
+		.reg = 0x10,
+		.bit = 0x01,
+	}, /* BUC5 */
+	{
+		.address = 0x48,
+		.reg = 0x10,
+		.bit = 0x00
+	}, /* BUC6 */
+	{
+		.address = 0x4c,
+		.reg = 0x92,
+	}, /* GPI1 */
+};
+
+/* TMP0 - TMP5 are the same, all from GPADC */
+static struct pmic_table thermal_table[] = {
+	{
+		.address = 0x00,
+		.reg = XPOWER_GPADC_LOW
+	},
+	{
+		.address = 0x0c,
+		.reg = XPOWER_GPADC_LOW
+	},
+	{
+		.address = 0x18,
+		.reg = XPOWER_GPADC_LOW
+	},
+	{
+		.address = 0x24,
+		.reg = XPOWER_GPADC_LOW
+	},
+	{
+		.address = 0x30,
+		.reg = XPOWER_GPADC_LOW
+	},
+	{
+		.address = 0x3c,
+		.reg = XPOWER_GPADC_LOW
+	},
+};
+
+static int intel_xpower_pmic_get_power(struct regmap *regmap, int reg,
+				       int bit, u64 *value)
+{
+	int data;
+
+	if (regmap_read(regmap, reg, &data))
+		return -EIO;
+
+	/* GPIO1 LDO regulator needs special handling */
+	if (reg == XPOWER_GPI1_CTRL)
+		*value = ((data & GPI1_LDO_MASK) == GPI1_LDO_ON);
+	else
+		*value = (data & BIT(bit)) ? 1 : 0;
+
+	return 0;
+}
+
+static int intel_xpower_pmic_update_power(struct regmap *regmap, int reg,
+					  int bit, bool on)
+{
+	int data, ret;
+
+	/* GPIO1 LDO regulator needs special handling */
+	if (reg == XPOWER_GPI1_CTRL)
+		return regmap_update_bits(regmap, reg, GPI1_LDO_MASK,
+					  on ? GPI1_LDO_ON : GPI1_LDO_OFF);
+
+	ret = iosf_mbi_block_punit_i2c_access();
+	if (ret)
+		return ret;
+
+	if (regmap_read(regmap, reg, &data)) {
+		ret = -EIO;
+		goto out;
+	}
+
+	if (on)
+		data |= BIT(bit);
+	else
+		data &= ~BIT(bit);
+
+	if (regmap_write(regmap, reg, data))
+		ret = -EIO;
+out:
+	iosf_mbi_unblock_punit_i2c_access();
+
+	return ret;
+}
+
+/**
+ * intel_xpower_pmic_get_raw_temp(): Get raw temperature reading from the PMIC
+ *
+ * @regmap: regmap of the PMIC device
+ * @reg: register to get the reading
+ *
+ * Return a positive value on success, errno on failure.
+ */
+static int intel_xpower_pmic_get_raw_temp(struct regmap *regmap, int reg)
+{
+	int ret, adc_ts_pin_ctrl;
+	u8 buf[2];
+
+	/*
+	 * The current-source used for the battery temp-sensor (TS) is shared
+	 * with the GPADC. For proper fuel-gauge and charger operation the TS
+	 * current-source needs to be permanently on. But to read the GPADC we
+	 * need to temporary switch the TS current-source to ondemand, so that
+	 * the GPADC can use it, otherwise we will always read an all 0 value.
+	 *
+	 * Note that the switching from on to on-ondemand is not necessary
+	 * when the TS current-source is off (this happens on devices which
+	 * do not use the TS-pin).
+	 */
+	ret = regmap_read(regmap, AXP288_ADC_TS_PIN_CTRL, &adc_ts_pin_ctrl);
+	if (ret)
+		return ret;
+
+	if (adc_ts_pin_ctrl & AXP288_ADC_TS_CURRENT_ON_OFF_MASK) {
+		ret = regmap_update_bits(regmap, AXP288_ADC_TS_PIN_CTRL,
+					 AXP288_ADC_TS_CURRENT_ON_OFF_MASK,
+					 AXP288_ADC_TS_CURRENT_ON_ONDEMAND);
+		if (ret)
+			return ret;
+
+		/* Wait a bit after switching the current-source */
+		usleep_range(6000, 10000);
+	}
+
+	ret = regmap_bulk_read(regmap, AXP288_GP_ADC_H, buf, 2);
+	if (ret == 0)
+		ret = (buf[0] << 4) + ((buf[1] >> 4) & 0x0f);
+
+	if (adc_ts_pin_ctrl & AXP288_ADC_TS_CURRENT_ON_OFF_MASK) {
+		regmap_update_bits(regmap, AXP288_ADC_TS_PIN_CTRL,
+				   AXP288_ADC_TS_CURRENT_ON_OFF_MASK,
+				   AXP288_ADC_TS_CURRENT_ON);
+	}
+
+	return ret;
+}
+
+static struct intel_pmic_opregion_data intel_xpower_pmic_opregion_data = {
+	.get_power = intel_xpower_pmic_get_power,
+	.update_power = intel_xpower_pmic_update_power,
+	.get_raw_temp = intel_xpower_pmic_get_raw_temp,
+	.power_table = power_table,
+	.power_table_count = ARRAY_SIZE(power_table),
+	.thermal_table = thermal_table,
+	.thermal_table_count = ARRAY_SIZE(thermal_table),
+	.pmic_i2c_address = 0x34,
+};
+
+static acpi_status intel_xpower_pmic_gpio_handler(u32 function,
+		acpi_physical_address address, u32 bit_width, u64 *value,
+		void *handler_context, void *region_context)
+{
+	return AE_OK;
+}
+
+static int intel_xpower_pmic_opregion_probe(struct platform_device *pdev)
+{
+	struct device *parent = pdev->dev.parent;
+	struct axp20x_dev *axp20x = dev_get_drvdata(parent);
+	acpi_status status;
+	int result;
+
+	status = acpi_install_address_space_handler(ACPI_HANDLE(parent),
+			ACPI_ADR_SPACE_GPIO, intel_xpower_pmic_gpio_handler,
+			NULL, NULL);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	result = intel_pmic_install_opregion_handler(&pdev->dev,
+					ACPI_HANDLE(parent), axp20x->regmap,
+					&intel_xpower_pmic_opregion_data);
+	if (result)
+		acpi_remove_address_space_handler(ACPI_HANDLE(parent),
+						  ACPI_ADR_SPACE_GPIO,
+						  intel_xpower_pmic_gpio_handler);
+
+	return result;
+}
+
+static struct platform_driver intel_xpower_pmic_opregion_driver = {
+	.probe = intel_xpower_pmic_opregion_probe,
+	.driver = {
+		.name = "axp288_pmic_acpi",
+	},
+};
+builtin_platform_driver(intel_xpower_pmic_opregion_driver);